-
-config BR2_LINUX_2_4
- bool "Linux 2.4"
- default y
-
+choice
+ prompt "Target system"
+
config BR2_LINUX_2_4_BRCM
- bool "Support for Broadcom based routers"
+ bool "Support for Broadcom based routers [2.4]"
default y
depends BR2_mipsel
- depends BR2_LINUX_2_4
help
Build firmware images for Broadcom based routers
(e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
with TFTP client too.
config BR2_LINUX_2_4_AR7
- bool "Support for TI AR7 based devices"
+ bool "Support for TI AR7 based devices [2.4]"
default n
depends BR2_mipsel
- depends BR2_LINUX_2_4
help
Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)
-config BR2_LINUX_2_4_SOEKRIS
- bool "Support for Soekris boards"
+config BR2_LINUX_2_4_X86
+ bool "Support for x86 boards [2.4]"
default n
depends BR2_i386
- depends BR2_LINUX_2_4
help
- Build firmware images for Soekris based boards
- (e.g. net4521, net4801)
-
- config BR2_TARGET_NET4521
- default y
- depends BR2_LINUX_2_4_SOEKRIS
- bool "Soekris net4521"
-
- config BR2_TARGET_NET4801
- default y
- depends BR2_LINUX_2_4_SOEKRIS
- bool "Soekris net4801"
-
-config BR2_LINUX_2_6
- bool "Linux 2.6"
- default n
-
+ Build firmware images for x86 based boards
+ (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
+
config BR2_LINUX_2_6_BRCM
- bool "Support for Broadcom based routers"
+ bool "Support for Broadcom based routers [2.6]"
default n
depends BR2_mipsel
- depends BR2_LINUX_2_6
- select BR2_PACKAGE_KMOD_B44
- select BR2_PACKAGE_KMOD_MADWIFI
- select BR2_PACKAGE_ROBOCFG
help
Build firmware images for Broadcom based routers
(e.g. Netgear WGT634u)
-
+
+endchoice
+
comment "Kernel Modules"
config BR2_PACKAGE_KMOD_SANGAM_ATM_A
help
Driver for the AR7 CPMAC network chip
-config BR2_PACKAGE_KMOD_DIAG
- tristate "Router LED/Button Driver"
- default y
- help
- Driver for the LEDs on Wireless Routers (diag)
-
config BR2_PACKAGE_KMOD_BRCM_WL
tristate "Broadcom Wireless Network Driver"
depends BR2_LINUX_2_4_BRCM
config BR2_PACKAGE_KMOD_B44
tristate "Broadcom 44XX, 47XX ethernet driver"
default m
+ default y if BR2_LINUX_2_6_BRCM
help
Free driver for Broadcom Ethernet chipsets (without switch support)
help
Kernel modules for IPv4 firewalling
+config BR2_PACKAGE_KMOD_AX25
+ tristate "AX25 support"
+ default m
+ help
+ Kernel modules for AX25 protocol family
+ - ax25.o: AX25 layer 2 support
+ - mkiss.o: AX25 KISS driver
+
config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA
tristate "Extra modules for iptables"
default m
help
Kernel modules for CIFS support
+config BR2_PACKAGE_KMOD_SOUNDCORE
+ tristate "Soundcard support"
+ default n
+ help
+ Base support for soundcards
+ Requires either USB soundcard support (OSS) or ALSA package to be useful
+
config BR2_PACKAGE_KMOD_USB
tristate "USB support"
default m
tristate "Support for USB soundcards"
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+ select BR2_PACKAGE_KMOD_SOUNDCORE
config BR2_PACKAGE_KMOD_USB_ACM
tristate "Support for USB modems/isdn controllers"
config BR2_PACKAGE_KMOD_VFAT
tristate "VFAT filesystem support"
default m
+ depends on BR2_PACKAGE_KMOD_NLS_BASE
+ depends on BR2_PACKAGE_KMOD_NLS_CP437 || BR2_PACKAGE_KMOD_NLS_CP850
help
Kernel modules for VFAT filesystem support
useful for usb mass storage devices
config BR2_PACKAGE_KMOD_ATM
tristate "ATM support"
- default m
default y if BR2_LINUX_2_4_AR7
help
ATM support
help
Kernel schedulers for IP traffic
+comment "Multimedia devices support ---"
+
config BR2_PACKAGE_KMOD_VIDEODEV
- tristate "Video (For Linux) kernel support"
+ tristate "kmod-videodev - Video (For Linux) kernel support"
default m
config BR2_PACKAGE_KMOD_PWC
- tristate "Kernel driver for USB Philips Cameras"
+ tristate "kmod-pwc - Kernel driver for USB Philips Cameras"
default m
-config BR2_PACKAGE_KMOD_NATSEMI
- tristate "Soekris net4801 ethernet driver"
- default y
- depends BR2_LINUX_2_4_SOEKRIS
+comment "Native language support ---"
+
+config BR2_PACKAGE_KMOD_NLS_BASE
+ tristate "kmod-nls-base - Basic native language support for filesystems"
+ default m
help
- Driver for the National Semiconductor DP8381x series PCI Ethernet
- found on Soekris net4801 boards
+ Kernel native language support
+
+config BR2_PACKAGE_KMOD_NLS_CP437
+ tristate "kmod-nls-cp437 - Codepage 437 (United States, Canada)"
+ default m
+ select BR2_PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
+
+config BR2_PACKAGE_KMOD_NLS_CP850
+ tristate "kmod-nls-cp850 - Codepage 850 (Europe)"
+ default m
+ select BR2_PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
+
+config BR2_PACKAGE_KMOD_NLS_IS08859_1
+ tristate "kmod-nls-iso8859-1 - NLS ISO 8859-1 (Latin 1; Western European Languages)"
+ default m
+ select BR2_PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
+
+config BR2_PACKAGE_KMOD_NLS_IS08859_15
+ tristate "kmod-nls-iso8859-15 - NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)"
+ default m
+ select BR2_PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
+
+config BR2_PACKAGE_KMOD_NLS_UTF8
+ tristate "kmod-nls-utf8 - NLS UTF8"
+ default m
+ select BR2_PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
+
+comment "Network devices support ---"
+
+config BR2_PACKAGE_KMOD_NET_3C59X
+ tristate "kmod-net-3C59x - 3Com 3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" Ethernet kernel support"
+ default m
+ help
+ This option enables driver support for a large number of 10mbps and
+ 10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+
+ * "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+ * "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
+ * "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
+ * "Tornado" (3c905) PCI
+ * "Hurricane" (3c555/3cSOHO) PCI
+
+ This package contains the 3c59x.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_8139TOO
+ tristate "kmod-net-8139too - RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support"
+ default m
+ help
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL8139 chips.
+
+ This package contains the 8139too.o and mii.o kernel modules.
+
+
+config BR2_PACKAGE_KMOD_NET_AIRO
+ tristate "kmod-net-airo - Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
+ default m
+ help
+ This is the standard Linux driver to support Cisco/Aironet ISA and
+ PCI 802.11 wireless cards.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ This package contains the airo.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_HERMES
+ tristate "kmod-net-hermes - Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
+ default m
+ help
+ A driver for 802.11b wireless cards based based on the "Hermes" or
+ Intersil HFA384x (Prism 2) MAC controller. This includes the vast
+ majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+ - except for the Cisco/Aironet cards. Cards supported include the
+ Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+ Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+ IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+ MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+ PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+ This package contains the hermes.o and orinoco.o kernel modules.
+
+
+config BR2_PACKAGE_KMOD_NET_HERMES_PCI
+ tristate "kmod-net-hermes-pci - Intersil Prism 2.5 PCI 802.11b adaptor support"
+ default m
+ depends BR2_PACKAGE_KMOD_NET_HERMES
+ help
+ Enable support for PCI and mini-PCI 802.11b wireless NICs based on
+ the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
+ PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
+ common. Some of the built-in wireless adaptors in laptops are of
+ this variety.
+
+ This package contains the orinoco_pci.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_HERMES_PLX
+ tristate "kmod-net-hermes-plx - Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
+ default m
+ depends BR2_PACKAGE_KMOD_NET_HERMES
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco_cs) driver when used in PLX9052 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines. The Netgear
+ MA301 is such an adaptor.
+
+ This package contains the orinoco_plx.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_NATSEMI
+ tristate "kmod-net-natsemi - National Semiconductor DP8381x series PCI Ethernet kernel support"
+ default m
+ help
+ This driver is for the National Semiconductor DP83810 series,
+ which is used in cards from PureData, NetGear, Linksys
+ and others, including the 83815 chip.
+
+ This package contains the natsemi.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_PRISM54
+ tristate "kmod-net-prism54 - Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
+ default m
+ help
+ Enable PCI and Cardbus support for the following chipset based cards:
+
+ * ISL3880 - Prism GT 802.11 b/g
+ * ISL3877 - Prism Indigo 802.11 a
+ * ISL3890 - Prism Duette 802.11 a/b/g
+
+ For a complete list of supported cards visit <http://prism54.org>.
+ Here is the latest confirmed list of supported cards:
+
+ * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ * Allnet ALL0271 PCI Card
+ * Compex WL54G Cardbus Card
+ * Corega CG-WLCB54GT Cardbus Card
+ * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+ * I-O Data WN-G54/CB Cardbus Card
+ * Kobishi XG-300 aka Z-Com Cardbus Card
+ * Netgear WG511 Cardbus Card
+ * Ovislink WL-5400PCI PCI Card
+ * Peabird WLG-PCI PCI Card
+ * Sitecom WL-100i Cardbus Card
+ * Sitecom WL-110i PCI Card
+ * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+ * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ * Z-Com XG-900 PCI Card
+ * Zyxel G-100 Cardbus Card
+
+ If you enable this, you require a firmware file as well.
+ You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+ You can get this non-GPL'd firmware file from the Prism54 project page:
+ <http://prism54.org>.
+
+ Note: You need a motherboard with DMA support to use any of these cards.
+
+ This package contains the prism54.o kernel module.
+
+
+comment "Misc. device support ---"
config BR2_PACKAGE_KMOD_WD1100
tristate "Soekris net4801 watchdog"
default y
- depends BR2_LINUX_2_4_SOEKRIS
+ depends BR2_LINUX_2_4_X86
help
Driver for the NatSemi SC1x00 series Watchdog
found on Soekris net4801 boards
+comment "Additional kernel modules ---"
+
source "target/linux/package/Config.in"
projects / openwrt.git / blobdiff