PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
include $(INCLUDE_DIR)/package.mk
+ifeq ($(DUMP),)
+ -include $(LINUX_DIR)/.config
+endif
-define Package/kmod-hostap/Default
- SECTION:=kernel
- CATEGORY:=Kernel drivers
+define KernelPackage/hostap/Default/2.4
+ VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+endef
+define KernelPackage/hostap/Default/2.6
+ VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
+endef
+define KernelPackage/hostap/Default
+ SUBMENU:=Wireless Drivers
DESCRIPTION:=\
Host AP is a driver for 802.11b wireless cards based on Intersil \\\
Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
card to act as an IEEE 802.11 access point.
URL:=http://hostap.epitest.fi/
- ifeq ($(KERNEL),2.6)
- VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
- else
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
- endif
+ $(call KernelPackage/hostap/Default/$(KERNEL))
endef
-define Package/kmod-hostap
- $(call Package/kmod-hostap/Default)
- DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT
+
+define KernelPackage/hostap
+ $(call KernelPackage/hostap/Default)
+ DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-ieee80211 +kmod-crypto
TITLE:=Host AP support for Prism2/2.5/3
DESCRIPTION+=\\\
\\\
different hardware models. You will also need to enable support for \\\
PLX/PCI/CS version of the driver to actually use the driver.
endef
+define KernelPackage/hostap/2.4
+ DEPENDS:=+kmod-crypto
+ FILES:= \
+ $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp)
+endef
+define KernelPackage/hostap/2.6
+ KCONFIG:=$(CONFIG_HOSTAP)
+ FILES:= \
+ $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,hostap)
+endef
+
-define Package/kmod-hostap-pci
- $(call Package/kmod-hostap/Default)
+define KernelPackage/hostap-pci
+ $(call KernelPackage/hostap/Default)
DEPENDS:=kmod-hostap
TITLE:=Host AP driver for PCI adaptors
DESCRIPTION+=\\\
\\\
This package contains the Host AP driver for Prism2.5 PCI adaptors.
+ AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
+endef
+define KernelPackage/hostap-pci/2.4
+ FILES:= \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX)
+endef
+define KernelPackage/hostap-pci/2.6
+ KCONFIG:=$(CONFIG_HOSTAP_PCI)
+ FILES:= \
+ $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
endef
-define Package/kmod-hostap-plx
- $(call Package/kmod-hostap/Default)
+
+define KernelPackage/hostap-plx
+ $(call KernelPackage/hostap/Default)
DEPENDS:=kmod-hostap
TITLE:=Host AP driver for PLX9052 based PCI adaptors
DESCRIPTION+=\\\
\\\
This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
based PCI adaptors.
+ AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
+endef
+define KernelPackage/hostap-plx/2.4
+ FILES:= \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX)
endef
+define KernelPackage/hostap-plx/2.6
+ KCONFIG:=$(CONFIG_HOSTAP_PLX)
+ FILES:= \
+ $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)
+endef
+
ifeq ($(KERNEL),2.4)
define Build/Compile
SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
modules
endef
-
- define Package/kmod-hostap/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- endef
-
- define Package/kmod-hostap-pci/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- endef
-
- define Package/kmod-hostap-plx/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- endef
-endif
-
-ifeq ($(KERNEL),2.6)
- define Build/Compile
+else
+ define Build/Prepare
+ mkdir -p $(PKG_BUILD_DIR)
endef
-ifeq ($(CONFIG_HOSTAP),m)
- define Package/kmod-hostap/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
+ define Build/Configure
endef
-endif
-
-ifeq ($(CONFIG_HOSTAP_PCI),m)
- define Package/kmod-hostap-pci/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
+
+ define Build/Compile
endef
endif
-ifeq ($(CONFIG_HOSTAP_PLX),m)
- define Package/kmod-hostap-plx/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- endef
-endif
-endif
-$(eval $(call BuildPackage,kmod-hostap))
-$(eval $(call BuildPackage,kmod-hostap-pci))
-$(eval $(call BuildPackage,kmod-hostap-plx))
+$(eval $(call KernelPackage,hostap))
+$(eval $(call KernelPackage,hostap-pci))
+$(eval $(call KernelPackage,hostap-plx))
projects / openwrt.git / blobdiff