#
# $Id$
-EMENU:=Other modules
+OTHER_MENU:=Other modules
-define KernelPackage/crypto
- TITLE:=CryptoAPI modules
- KCONFIG:= \
- CONFIG_CRYPTO_HMAC \
- CONFIG_CRYPTO_NULL \
- CONFIG_CRYPTO_MD4 \
- CONFIG_CRYPTO_MD5 \
- CONFIG_CRYPTO_SHA1 \
- CONFIG_CRYPTO_SHA256 \
- CONFIG_CRYPTO_SHA512 \
- CONFIG_CRYPTO_WP512 \
- CONFIG_CRYPTO_TGR192 \
- CONFIG_CRYPTO_DES \
- CONFIG_CRYPTO_BLOWFISH \
- CONFIG_CRYPTO_TWOFISH \
- CONFIG_CRYPTO_SERPENT \
- CONFIG_CRYPTO_AES \
- CONFIG_CRYPTO_CAST5 \
- CONFIG_CRYPTO_CAST6 \
- CONFIG_CRYPTO_TEA \
- CONFIG_CRYPTO_ARC4 \
- CONFIG_CRYPTO_KHAZAD \
- CONFIG_CRYPTO_ANUBIS \
- CONFIG_CRYPTO_DEFLATE \
- CONFIG_CRYPTO_MICHAEL_MIC \
- CONFIG_CRYPTO_CRC32C \
- CONFIG_CRYPTO_ECB \
- CONFIG_CRYPTO_BLKCIPHER
- FILES:=$(LINUX_DIR)/crypto/*.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(EMENU)
-endef
-$(eval $(call KernelPackage,crypto))
-
-define KernelPackage/ide-core
- TITLE:=Kernel support for IDE
- DESCRIPTION:=\
- Useful for usb mass storage devices (e.g. on WL-HDD)\\\
- \\\
- Includes: \\\
- - ide-core \\\
- - ide-detect \\\
- - ide-disk
- KCONFIG:=CONFIG_IDE
- FILES:=$(LINUX_DIR)/drivers/ide/*.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,20,ide-core) $(call AutoLoad,90,ide-generic ide-detect ide-disk)
-endef
-$(eval $(call KernelPackage,ide-core))
-
-define KernelPackage/ide-pdc202xx
- TITLE:=PDC202xx IDE driver
- SUBMENU:=$(EMENU)
- DEPENDS:=@LINUX_2_4
- KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
- FILES:=$(LINUX_DIR)/drivers/ide/pci/pdc202xx_old.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old)
+define KernelPackage/crc-itu-t
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC ITU-T V.41 support
+ KCONFIG:=CONFIG_CRC_ITU_T
+ FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
endef
-$(eval $(call KernelPackage,ide-pdc202xx))
-define KernelPackage/ide-aec62xx
- TITLE:=AEC62xx IDE driver
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_BLK_DEV_AEC62XX
- FILES:=$(LINUX_DIR)/drivers/ide/pci/aec62xx.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,aec62xx)
+define KernelPackage/crc-itu-t/description
+ Kernel module for CRC ITU-T V.41 support
endef
-$(eval $(call KernelPackage,ide-aec62xx))
-define KernelPackage/scsi-core
- TITLE:=Kernel support for SCSI
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_SCSI CONFIG_BLK_DEV_SD
- FILES:= \
- $(LINUX_DIR)/drivers/scsi/scsi_mod.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/scsi/sd_mod.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,crc-itu-t))
+
+
+define KernelPackage/crc7
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC7 support
+ KCONFIG:=CONFIG_CRC7
+ FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc7)
endef
-$(eval $(call KernelPackage,scsi-core))
-define KernelPackage/lp
- TITLE:=Parallel port and line printer support
- DEPENDS:=@LINUX_2_4
- KCONFIG:=CONFIG_PARPORT
- FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,50, \
- parport \
- lp \
- )
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support
endef
-$(eval $(call KernelPackage,lp))
+$(eval $(call KernelPackage,crc7))
-define KernelPackage/soundcore
- TITLE:=Sound support
- DESCRIPTION:=Kernel modules for sound support
- KCONFIG:=CONFIG_SOUND
- SUBMENU:=$(EMENU)
-endef
-define KernelPackage/soundcore/2.4
- FILES:=$(LINUX_DIR)/drivers/sound/soundcore.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore)
+define KernelPackage/eeprom-93cx6
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=EEPROM 93CX6 support
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_EEPROM_93CX6
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
-define KernelPackage/soundcore/2.6
- FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/*.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_SND_MIXER_OSS)$(CONFIG_SND_PCM_OSS),$(LINUX_DIR)/sound/core/oss/*.$(LINUX_KMOD_SUFFIX))
- AUTOLOAD:=$(call AutoLoad,30,soundcore snd snd-page-alloc snd-hwdep snd-rawmidi snd-timer snd-pcm $(if $(CONFIG_SND_MIXER_OSS),snd-mixer-oss) $(if $(CONFIG_SND_PCM_OSS),snd-pcm-oss))
+define KernelPackage/eeprom-93cx6/description
+ Kernel module for EEPROM 93CX6 support
endef
-define KernelPackage/soundcore/uml-2.6
- FILES:= \
- $(LINUX_DIR)/arch/um/drivers/hostaudio.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore hostaudio)
-endef
+$(eval $(call KernelPackage,eeprom-93cx6))
-$(eval $(call KernelPackage,soundcore))
-
-define KernelPackage/loop
- TITLE:=Loopback device support
- DESCRIPTION:=Kernel module for loopback device support
- KCONFIG:=CONFIG_BLK_DEV_LOOP
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,30,loop)
- FILES:=$(LINUX_DIR)/drivers/block/loop.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/lp
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Parallel port and line printer support
+ DEPENDS:=@LINUX_2_4
+ KCONFIG:= \
+ CONFIG_PARPORT \
+ CONFIG_PRINTER \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,parport lp)
endef
-$(eval $(call KernelPackage,loop))
-define KernelPackage/nbd
- TITLE:=Network block device support
- DESCRIPTION:=Kernel module for network block device support
- KCONFIG:=CONFIG_BLK_DEV_NBD
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,30,nbd)
- FILES:=$(LINUX_DIR)/drivers/block/nbd.$(LINUX_KMOD_SUFFIX)
-endef
-$(eval $(call KernelPackage,nbd))
+$(eval $(call KernelPackage,lp))
-define KernelPackage/capi
- TITLE:=CAPI Support
- DESCRIPTION:=Kernel module for basic CAPI support
- KCONFIG:=CONFIG_ISDN CONFIG_ISDN_CAPI CONFIG_ISDN_CAPI_CAPI20
- DEPENDS:=@LINUX_2_6
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,30,kernelcapi capi)
- FILES:=$(LINUX_DIR)/drivers/isdn/capi/*capi.$(LINUX_KMOD_SUFFIX)
-endef
-$(eval $(call KernelPackage,capi))
define KernelPackage/pcmcia-core
+ SUBMENU:=$(OTHER_MENU)
TITLE:=PCMCIA/CardBus support
- DESCRIPTION:=Kernel support for PCMCIA/CardBus controllers
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_PCMCIA CONFIG_PCCARD
+ DEPENDS:=@PCMCIA_SUPPORT
+ KCONFIG:= \
+ CONFIG_PCMCIA \
+ CONFIG_CARDBUS \
+ CONFIG_PCCARD \
+ CONFIG_YENTA \
+ CONFIG_PCCARD_NONSTATIC \
+ PCMCIA_DEBUG=n
endef
define KernelPackage/pcmcia-core/2.4
+# KCONFIG:= \
+# CONFIG_PCMCIA \
+# CONFIG_CARDBUS
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,pcmcia_core yenta_socket ds)
endef
define KernelPackage/pcmcia-core/2.6
+# KCONFIG:= \
+# CONFIG_PCCARD \
+# CONFIG_PCMCIA \
+# CONFIG_YENTA \
+# CONFIG_PCCARD_NONSTATIC \
+# PCMCIA_DEBUG=n
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_PCMCIA),$(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX)) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic yenta_socket)
endef
+
+define KernelPackage/pcmcia-core/au1000-2.6
+ FILES:= \
+ $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic au1x00_ss)
+endef
+
+define KernelPackage/pcmcia-core/description
+ Kernel support for PCMCIA/CardBus controllers
+endef
+
$(eval $(call KernelPackage,pcmcia-core))
define KernelPackage/pcmcia-serial
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Serial devices support
- DESCRIPTION:=Kernel support for PCMCIA/CardBus serial devices
DEPENDS:=kmod-pcmcia-core
- SUBMENU:=$(EMENU)
+ KCONFIG:= \
+ CONFIG_PCMCIA_SERIAL_CS \
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
- KCONFIG:=CONFIG_PCMCIA_SERIAL_CS CONFIG_SERIAL_8250_CS
endef
define KernelPackage/pcmcia-serial/2.4
+# KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/pcmcia-serial/2.6
+# KCONFIG:=CONFIG_SERIAL_8250_CS
FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
+
+define KernelPackage/pcmcia-serial/description
+ Kernel support for PCMCIA/CardBus serial devices
+endef
+
$(eval $(call KernelPackage,pcmcia-serial))
+# XXX: remove @!TARGET_* later when we have USB support properly detected on all targets
define KernelPackage/bluetooth
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT
- DESCRIPTION:=Kernel support for Bluetooth devices
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_BLUEZ CONFIG_BT
- endef
-
- define KernelPackage/bluetooth/2.4
+ DEPENDS:=@USB_SUPPORT @!TARGET_atheros @!TARGET_uml
+ KCONFIG:= \
+ CONFIG_BLUEZ \
+ CONFIG_BLUEZ_L2CAP \
+ CONFIG_BLUEZ_SCO \
+ CONFIG_BLUEZ_RFCOMM \
+ CONFIG_BLUEZ_BNEP \
+ CONFIG_BLUEZ_HCIUART \
+ CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BT \
+ CONFIG_BT_L2CAP \
+ CONFIG_BT_SCO \
+ CONFIG_BT_RFCOMM \
+ CONFIG_BT_BNEP \
+ CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIUART
+endef
+
+define KernelPackage/bluetooth/2.4
+# KCONFIG:= \
+# CONFIG_BLUEZ \
+# CONFIG_BLUEZ_L2CAP \
+# CONFIG_BLUEZ_SCO \
+# CONFIG_BLUEZ_RFCOMM \
+# CONFIG_BLUEZ_BNEP \
+# CONFIG_BLUEZ_HCIUART \
+# CONFIG_BLUEZ_HCIUSB
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
endef
define KernelPackage/bluetooth/2.6
+# KCONFIG:= \
+# CONFIG_BT \
+# CONFIG_BT_L2CAP \
+# CONFIG_BT_SCO \
+# CONFIG_BT_RFCOMM \
+# CONFIG_BT_BNEP \
+# CONFIG_BT_HCIUSB \
+# CONFIG_BT_HCIUART
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
endef
+
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices
+endef
+
$(eval $(call KernelPackage,bluetooth))
+
define KernelPackage/mmc
+ SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@LINUX_2_6_AT91
- DESCRIPTION:=Kernel support for MMC/SD cards
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_MMC
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:= \
+ CONFIG_MMC \
+ CONFIG_MMC_BLOCK \
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/mmc_block.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
+endef
+
+define KernelPackage/mmc/description
+ Kernel support for MMC/SD cards
endef
+
$(eval $(call KernelPackage,mmc))
+
+define KernelPackage/mmc-at91
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD Card Support on AT91
+ DEPENDS:=@TARGET_at91 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_AT91
+ FILES:=$(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
+# XXX: added a workaround for watchdog path changes
+ifeq ($(KERNEL),2.4)
+ WATCHDOG_DIR=char
+endif
+ifeq ($(KERNEL_PATCHVER),2.6.24)
+ WATCHDOG_DIR=watchdog
+endif
+WATCHDOG_DIR?=char/watchdog
+
define KernelPackage/softdog
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- DESCRIPTION:=Software watchdog driver
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_SOFT_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/char/softdog.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
-define KernelPackage/softdog/2.4
- FILES:=$(LINUX_DIR)/drivers/char/softdog.o
+define KernelPackage/softdog/description
+ Software watchdog driver
endef
-define KernelPackage/softdog/2.6
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/softdog.ko
-endef
$(eval $(call KernelPackage,softdog))
-define KernelPackage/videodev
- TITLE=Video4Linux support
- DESCRIPTION:=Kernel modules for Video4Linux support
- DEPENDS:=@VIDEO_SUPPORT
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_VIDEO_DEV
- FILES:=$(LINUX_DIR)/drivers/media/video/*.$(LINUX_KMOD_SUFFIX)
+# XXX: remove @TARGET_* later when we are able to detect the exact version of the kernel
+define KernelPackage/leds-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO LED support
+ DEPENDS:=@TARGET_adm5120
+ KCONFIG:=CONFIG_LEDS_GPIO
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
+endef
+
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
+endef
+
+$(eval $(call KernelPackage,leds-gpio))
+
+
+define KernelPackage/leds-adm5120
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ADM5120 LED support
+ DEPENDS:=@TARGET_adm5120 +kmod-leds-gpio
+ KCONFIG:=CONFIG_LEDS_ADM5120
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-adm5120.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,59,leds-adm5120)
+endef
+
+define KernelPackage/leds-adm5120/description
+ Kernel module for LEDs on ADM5120 based boards.
endef
-define KernelPackage/videodev/2.4
- AUTOLOAD:=$(call AutoLoad,60,videodev)
+$(eval $(call KernelPackage,leds-adm5120))
+
+
+define KernelPackage/ledtrig-adm5120-switch
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED ADM5120 Switch Port Status Trigger
+ DEPENDS:=@TARGET_adm5120
+ KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
endef
-define KernelPackage/videodev/2.6
- AUTOLOAD:=$(call AutoLoad,60,v4l2-common v4l1-compat compat_ioctl32 videodev)
+define KernelPackage/ledtrig-adm5120-switch/description
+ Kernel module to allow LEDs to be controlled by the port states
+ of the ADM5120 built-in ethernet switch.
endef
-$(eval $(call KernelPackage,videodev))
+
+$(eval $(call KernelPackage,ledtrig-adm5120-switch))
+
define KernelPackage/leds-net48xx
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
- DESCRIPTION:=Kernel module for Soekris Net48xx LEDs
- DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(EMENU)
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_LEDS_NET48XX
FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
endef
+
+define KernelPackage/leds-net48xx/description
+ Kernel module for Soekris Net48xx LEDs
+endef
+
$(eval $(call KernelPackage,leds-net48xx))
+
+define KernelPackage/leds-wrap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines WRAP LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_WRAP
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+endef
+
+define KernelPackage/leds-wrap/description
+ Kernel module for PCengines WRAP LEDs
+endef
+
+$(eval $(call KernelPackage,leds-wrap))
+
+
+define KernelPackage/leds-alix
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines ALIX LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_ALIX
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
+
+
+define KernelPackage/ledtrig-netdev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED NETDEV Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+endef
+
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
+endef
+
+$(eval $(call KernelPackage,ledtrig-netdev))
+
+
+define KernelPackage/ledtrig-morse
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED Morse Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+endef
+
+define KernelPackage/ledtrig-morse/description
+ Kernel module to show morse coded messages on LEDs.
+endef
+
+$(eval $(call KernelPackage,ledtrig-morse))
+
+
define KernelPackage/nsc-gpio
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi GPIO support
- DESCRIPTION:=Kernel module for Natsemi GPIO
- DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(EMENU)
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_NSC_GPIO
FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
endef
+
+define KernelPackage/nsc-gpio/description
+ Kernel module for Natsemi GPIO
+endef
+
$(eval $(call KernelPackage,nsc-gpio))
+
define KernelPackage/scx200-gpio
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 GPIO support
- DESCRIPTION:=Kernel module for SCX200 GPIO
- DEPENDS:=kmod-nsc-gpio @LINUX_2_6_X86
- SUBMENU:=$(EMENU)
+ DEPENDS:=@TARGET_x86 kmod-nsc-gpio
KCONFIG:=CONFIG_SCx200_GPIO
FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
endef
+
+define KernelPackage/scx200-gpio/description
+ Kernel module for SCX200 GPIO
+endef
+
$(eval $(call KernelPackage,scx200-gpio))
+
define KernelPackage/scx200-wdt
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 Watchdog support
- DESCRIPTION:=Kernel module for SCX200 Watchdog
- DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(EMENU)
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_SC1200_WDT
FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
-$(eval $(call KernelPackage,scx200-wdt))
-define KernelPackage/hwmon
- TITLE:=Hardware monitoring support
- DESCRIPTION:=Kernel modules for hardware monitoring
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_HWMON_VID
- FILES:= \
- $(LINUX_DIR)/drivers/hwmon/hwmon.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/hwmon/hwmon-vid.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,hwmon hwmon-vid)
+define KernelPackage/scx200-wdt/description
+ Kernel module for SCX200 Watchdog
endef
-$(eval $(call KernelPackage,hwmon))
-define KernelPackage/hwmon-pc87360
- TITLE:=PC87360 monitoring support
- DESCRIPTION:=Kernel modules for PC87360 chips
- DEPENDS:=kmod-hwmon
- SUBMENU:=$(EMENU)
- KCONFIG:=CONFIG_SENSORS_PC87360
- FILES:=$(LINUX_DIR)/drivers/hwmon/pc87360.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,pc87360)
-endef
-$(eval $(call KernelPackage,hwmon-pc87360))
+$(eval $(call KernelPackage,scx200-wdt))
+
define KernelPackage/input-core
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
- DESCRIPTION:=Kernel modules for support of input device
- SUBMENU:=$(EMENU)
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,input-core)
endef
+
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
+endef
+
$(eval $(call KernelPackage,input-core))
+
define KernelPackage/input-evdev
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Input even device
- DESCRIPTION:=Kernel modules for support of input device events
DEPENDS:=+kmod-input-core
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,evdev)
endef
+
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
$(eval $(call KernelPackage,input-evdev))
+
+define KernelPackage/mmc-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD over SPI Support
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_MMC_SPI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
+endef
+
+define KernelPackage/mmc-spi/description
+ Kernel support for MMC/SD over SPI
+endef
+
+$(eval $(call KernelPackage,mmc-spi))
+
+define KernelPackage/spi
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@LINUX_2_6 +kmod-crc-itu-t +kmod-crc7
+ TITLE:=Serial Peripheral Interface
+ KCONFIG:=CONFIG_SPI=y \
+ CONFIG_MTD_DATAFLASH=n \
+ CONFIG_MTD_M25P80=n \
+ CONFIG_SPI_AT25=n \
+ CONFIG_SPI_SPIDEV=n \
+ CONFIG_SPI_TLE62X0=n
+endef
+
+define KernelPackage/spi/description
+ This package contains the Serial Peripheral Interface driver
+endef
+
+$(eval $(call KernelPackage,spi))
+
+define KernelPackage/spi-bitbang
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@LINUX_2_6
+ TITLE:=Serial Peripheral Interface bitbanging
+ KCONFIG:=CONFIG_SPI_BITBANG=y
+endef
+
+define KernelPackage/spi-bitbang/description
+ This package contains the Serial Peripheral Interface bitbanging library
+endef
+
+$(eval $(call KernelPackage,spi-bitbang))
projects / openwrt.git / blobdiff