G PHY LO (LocalOscillator) Measuring and Control routines
Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
- Copyright (c) 2005, 2006 Stefano Brivio <st3@riseup.net>
+ Copyright (c) 2005, 2006 Stefano Brivio <stefano.brivio@polimi.it>
Copyright (c) 2005-2007 Michael Buesch <mb@bu3sch.de>
Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
#include <linux/sched.h>
-/* Define to 1 to always calibrate all possible LO control pairs.
- * This is a workaround until we fix the partial LO calibration optimization. */
-#define B43_CALIB_ALL_LOCTLS 1
+static struct b43_lo_calib * b43_find_lo_calib(struct b43_txpower_lo_control *lo,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
+{
+ struct b43_lo_calib *c;
+
+ list_for_each_entry(c, &lo->calib_list, list) {
+ if (!b43_compare_bbatt(&c->bbatt, bbatt))
+ continue;
+ if (!b43_compare_rfatt(&c->rfatt, rfatt))
+ continue;
+ return c;
+ }
+ return NULL;
+}
/* Write the LocalOscillator Control (adjust) value-pair. */
static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control)
{
struct b43_phy *phy = &dev->phy;
u16 value;
- u16 reg;
if (B43_DEBUG) {
if (unlikely(abs(control->i) > 16 || abs(control->q) > 16)) {
return;
}
}
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
value = (u8) (control->q);
value |= ((u8) (control->i)) << 8;
-
- reg = (phy->type == B43_PHYTYPE_B) ? 0x002F : B43_PHY_LO_CTL;
- b43_phy_write(dev, reg, value);
-}
-
-static int assert_rfatt_and_bbatt(const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt,
- struct b43_wldev *dev)
-{
- int err = 0;
-
- /* Check the attenuation values against the LO control array sizes. */
- if (unlikely(rfatt->att >= B43_NR_RF)) {
- b43err(dev->wl, "rfatt(%u) >= size of LO array\n", rfatt->att);
- err = -EINVAL;
- }
- if (unlikely(bbatt->att >= B43_NR_BB)) {
- b43err(dev->wl, "bbatt(%u) >= size of LO array\n", bbatt->att);
- err = -EINVAL;
- }
-
- return err;
-}
-
-#if !B43_CALIB_ALL_LOCTLS
-static
-struct b43_loctl *b43_get_lo_g_ctl_nopadmix(struct b43_wldev *dev,
- const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
-
- if (assert_rfatt_and_bbatt(rfatt, bbatt, dev))
- return &(lo->no_padmix[0][0]); /* Just prevent a crash */
- return &(lo->no_padmix[bbatt->att][rfatt->att]);
-}
-#endif /* !B43_CALIB_ALL_LOCTLS */
-
-struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev,
- const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
-
- if (assert_rfatt_and_bbatt(rfatt, bbatt, dev))
- return &(lo->no_padmix[0][0]); /* Just prevent a crash */
- if (rfatt->with_padmix)
- return &(lo->with_padmix[bbatt->att][rfatt->att]);
- return &(lo->no_padmix[bbatt->att][rfatt->att]);
-}
-
-/* Call a function for every possible LO control value-pair. */
-static void b43_call_for_each_loctl(struct b43_wldev *dev,
- void (*func) (struct b43_wldev *,
- struct b43_loctl *))
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *ctl = phy->lo_control;
- int i, j;
-
- for (i = 0; i < B43_NR_BB; i++) {
- for (j = 0; j < B43_NR_RF; j++)
- func(dev, &(ctl->with_padmix[i][j]));
- }
- for (i = 0; i < B43_NR_BB; i++) {
- for (j = 0; j < B43_NR_RF; j++)
- func(dev, &(ctl->no_padmix[i][j]));
- }
-}
-
-static u16 lo_b_r15_loop(struct b43_wldev *dev)
-{
- int i;
- u16 ret = 0;
-
- for (i = 0; i < 10; i++) {
- b43_phy_write(dev, 0x0015, 0xAFA0);
- udelay(1);
- b43_phy_write(dev, 0x0015, 0xEFA0);
- udelay(10);
- b43_phy_write(dev, 0x0015, 0xFFA0);
- udelay(40);
- ret += b43_phy_read(dev, 0x002C);
- }
-
- return ret;
-}
-
-void b43_lo_b_measure(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 regstack[12] = { 0 };
- u16 mls;
- u16 fval;
- int i, j;
-
- regstack[0] = b43_phy_read(dev, 0x0015);
- regstack[1] = b43_radio_read16(dev, 0x0052) & 0xFFF0;
-
- if (phy->radio_ver == 0x2053) {
- regstack[2] = b43_phy_read(dev, 0x000A);
- regstack[3] = b43_phy_read(dev, 0x002A);
- regstack[4] = b43_phy_read(dev, 0x0035);
- regstack[5] = b43_phy_read(dev, 0x0003);
- regstack[6] = b43_phy_read(dev, 0x0001);
- regstack[7] = b43_phy_read(dev, 0x0030);
-
- regstack[8] = b43_radio_read16(dev, 0x0043);
- regstack[9] = b43_radio_read16(dev, 0x007A);
- regstack[10] = b43_read16(dev, 0x03EC);
- regstack[11] = b43_radio_read16(dev, 0x0052) & 0x00F0;
-
- b43_phy_write(dev, 0x0030, 0x00FF);
- b43_write16(dev, 0x03EC, 0x3F3F);
- b43_phy_write(dev, 0x0035, regstack[4] & 0xFF7F);
- b43_radio_write16(dev, 0x007A, regstack[9] & 0xFFF0);
- }
- b43_phy_write(dev, 0x0015, 0xB000);
- b43_phy_write(dev, 0x002B, 0x0004);
-
- if (phy->radio_ver == 0x2053) {
- b43_phy_write(dev, 0x002B, 0x0203);
- b43_phy_write(dev, 0x002A, 0x08A3);
- }
-
- phy->minlowsig[0] = 0xFFFF;
-
- for (i = 0; i < 4; i++) {
- b43_radio_write16(dev, 0x0052, regstack[1] | i);
- lo_b_r15_loop(dev);
- }
- for (i = 0; i < 10; i++) {
- b43_radio_write16(dev, 0x0052, regstack[1] | i);
- mls = lo_b_r15_loop(dev) / 10;
- if (mls < phy->minlowsig[0]) {
- phy->minlowsig[0] = mls;
- phy->minlowsigpos[0] = i;
- }
- }
- b43_radio_write16(dev, 0x0052, regstack[1] | phy->minlowsigpos[0]);
-
- phy->minlowsig[1] = 0xFFFF;
-
- for (i = -4; i < 5; i += 2) {
- for (j = -4; j < 5; j += 2) {
- if (j < 0)
- fval = (0x0100 * i) + j + 0x0100;
- else
- fval = (0x0100 * i) + j;
- b43_phy_write(dev, 0x002F, fval);
- mls = lo_b_r15_loop(dev) / 10;
- if (mls < phy->minlowsig[1]) {
- phy->minlowsig[1] = mls;
- phy->minlowsigpos[1] = fval;
- }
- }
- }
- phy->minlowsigpos[1] += 0x0101;
-
- b43_phy_write(dev, 0x002F, phy->minlowsigpos[1]);
- if (phy->radio_ver == 0x2053) {
- b43_phy_write(dev, 0x000A, regstack[2]);
- b43_phy_write(dev, 0x002A, regstack[3]);
- b43_phy_write(dev, 0x0035, regstack[4]);
- b43_phy_write(dev, 0x0003, regstack[5]);
- b43_phy_write(dev, 0x0001, regstack[6]);
- b43_phy_write(dev, 0x0030, regstack[7]);
-
- b43_radio_write16(dev, 0x0043, regstack[8]);
- b43_radio_write16(dev, 0x007A, regstack[9]);
-
- b43_radio_write16(dev, 0x0052,
- (b43_radio_read16(dev, 0x0052) & 0x000F)
- | regstack[11]);
-
- b43_write16(dev, 0x03EC, regstack[10]);
- }
- b43_phy_write(dev, 0x0015, regstack[0]);
+ b43_phy_write(dev, B43_PHY_LO_CTL, value);
}
static u16 lo_measure_feedthrough(struct b43_wldev *dev,
rfover |= pga;
rfover |= lna;
rfover |= trsw_rx;
- if ((dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) &&
- phy->rev > 6)
+ if ((dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA)
+ && phy->rev > 6)
rfover |= B43_PHY_RFOVERVAL_EXTLNA;
b43_phy_write(dev, B43_PHY_PGACTL, 0xE300);
if (lb_gain > 10) {
radio_pctl_reg = 0;
pga = abs(10 - lb_gain) / 6;
- pga = limit_value(pga, 0, 15);
+ pga = clamp_val(pga, 0, 15);
} else {
int cmp_val;
int tmp;
b43_radio_write16(dev, 0x52, b43_radio_read16(dev, 0x52)
& 0xFFF0); /* TX bias == 0 */
}
+ lo->txctl_measured_time = jiffies;
}
static void lo_read_power_vector(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
struct b43_txpower_lo_control *lo = phy->lo_control;
- u16 i;
+ int i;
u64 tmp;
u64 power_vector = 0;
- int rf_offset, bb_offset;
- struct b43_loctl *loctl;
for (i = 0; i < 8; i += 2) {
tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x310 + i);
- /* Clear the top byte. We get holes in the bitmap... */
- tmp &= 0xFF;
power_vector |= (tmp << (i * 8));
/* Clear the vector on the device. */
b43_shm_write16(dev, B43_SHM_SHARED, 0x310 + i, 0);
}
-
if (power_vector)
lo->power_vector = power_vector;
- power_vector = lo->power_vector;
-
- for (i = 0; i < 64; i++) {
- if (power_vector & ((u64) 1ULL << i)) {
- /* Now figure out which b43_loctl corresponds
- * to this bit.
- */
- rf_offset = i / lo->rfatt_list.len;
- bb_offset = i % lo->rfatt_list.len; //FIXME?
- loctl =
- b43_get_lo_g_ctl(dev,
- &lo->rfatt_list.list[rf_offset],
- &lo->bbatt_list.list[bb_offset]);
- /* And mark it as "used", as the device told us
- * through the bitmap it is using it.
- */
- loctl->used = 1;
- }
- }
+ lo->pwr_vec_read_time = jiffies;
}
/* 802.11/LO/GPHY/MeasuringGains */
phy->lna_lod_gain = 1;
trsw_rx_gain -= 8;
}
- trsw_rx_gain = limit_value(trsw_rx_gain, 0, 0x2D);
+ trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D);
phy->pga_gain = trsw_rx_gain / 3;
if (phy->pga_gain >= 5) {
phy->pga_gain -= 5;
u16 phy_extg_01;
u16 phy_dacctl_hwpctl;
u16 phy_dacctl;
- u16 phy_base_14;
+ u16 phy_cck_14;
u16 phy_hpwr_tssictl;
u16 phy_analogover;
u16 phy_analogoverval;
u16 phy_rfover;
u16 phy_rfoverval;
u16 phy_classctl;
- u16 phy_base_3E;
+ u16 phy_cck_3E;
u16 phy_crs0;
u16 phy_pgactl;
- u16 phy_base_2A;
+ u16 phy_cck_2A;
u16 phy_syncctl;
- u16 phy_base_30;
- u16 phy_base_06;
+ u16 phy_cck_30;
+ u16 phy_cck_06;
/* Radio registers */
u16 radio_43;
sav->phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK);
sav->phy_extg_01 = b43_phy_read(dev, B43_PHY_EXTG(0x01));
sav->phy_dacctl_hwpctl = b43_phy_read(dev, B43_PHY_DACCTL);
- sav->phy_base_14 = b43_phy_read(dev, B43_PHY_BASE(0x14));
+ sav->phy_cck_14 = b43_phy_read(dev, B43_PHY_CCK(0x14));
sav->phy_hpwr_tssictl = b43_phy_read(dev, B43_PHY_HPWR_TSSICTL);
b43_phy_write(dev, B43_PHY_HPWR_TSSICTL,
b43_phy_write(dev, B43_PHY_DACCTL,
b43_phy_read(dev, B43_PHY_DACCTL)
| 0x40);
- b43_phy_write(dev, B43_PHY_BASE(0x14),
- b43_phy_read(dev, B43_PHY_BASE(0x14))
+ b43_phy_write(dev, B43_PHY_CCK(0x14),
+ b43_phy_read(dev, B43_PHY_CCK(0x14))
| 0x200);
}
if (phy->type == B43_PHYTYPE_B &&
phy->radio_ver == 0x2050 && phy->radio_rev < 6) {
- b43_phy_write(dev, B43_PHY_BASE(0x16), 0x410);
- b43_phy_write(dev, B43_PHY_BASE(0x17), 0x820);
+ b43_phy_write(dev, B43_PHY_CCK(0x16), 0x410);
+ b43_phy_write(dev, B43_PHY_CCK(0x17), 0x820);
}
- if (!lo->rebuild && b43_has_hardware_pctl(phy))
- lo_read_power_vector(dev);
if (phy->rev >= 2) {
sav->phy_analogover = b43_phy_read(dev, B43_PHY_ANALOGOVER);
sav->phy_analogoverval =
sav->phy_rfover = b43_phy_read(dev, B43_PHY_RFOVER);
sav->phy_rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL);
sav->phy_classctl = b43_phy_read(dev, B43_PHY_CLASSCTL);
- sav->phy_base_3E = b43_phy_read(dev, B43_PHY_BASE(0x3E));
+ sav->phy_cck_3E = b43_phy_read(dev, B43_PHY_CCK(0x3E));
sav->phy_crs0 = b43_phy_read(dev, B43_PHY_CRS0);
b43_phy_write(dev, B43_PHY_CLASSCTL,
& 0xFFFC);
if (phy->type == B43_PHYTYPE_G) {
if ((phy->rev >= 7) &&
- (sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+ (sprom->boardflags_lo & B43_BFL_EXTLNA)) {
b43_phy_write(dev, B43_PHY_RFOVER, 0x933);
} else {
b43_phy_write(dev, B43_PHY_RFOVER, 0x133);
} else {
b43_phy_write(dev, B43_PHY_RFOVER, 0);
}
- b43_phy_write(dev, B43_PHY_BASE(0x3E), 0);
+ b43_phy_write(dev, B43_PHY_CCK(0x3E), 0);
}
sav->reg_3F4 = b43_read16(dev, 0x3F4);
sav->reg_3E2 = b43_read16(dev, 0x3E2);
sav->radio_43 = b43_radio_read16(dev, 0x43);
sav->radio_7A = b43_radio_read16(dev, 0x7A);
sav->phy_pgactl = b43_phy_read(dev, B43_PHY_PGACTL);
- sav->phy_base_2A = b43_phy_read(dev, B43_PHY_BASE(0x2A));
+ sav->phy_cck_2A = b43_phy_read(dev, B43_PHY_CCK(0x2A));
sav->phy_syncctl = b43_phy_read(dev, B43_PHY_SYNCCTL);
sav->phy_dacctl = b43_phy_read(dev, B43_PHY_DACCTL);
sav->radio_52 &= 0x00F0;
}
if (phy->type == B43_PHYTYPE_B) {
- sav->phy_base_30 = b43_phy_read(dev, B43_PHY_BASE(0x30));
- sav->phy_base_06 = b43_phy_read(dev, B43_PHY_BASE(0x06));
- b43_phy_write(dev, B43_PHY_BASE(0x30), 0x00FF);
- b43_phy_write(dev, B43_PHY_BASE(0x06), 0x3F3F);
+ sav->phy_cck_30 = b43_phy_read(dev, B43_PHY_CCK(0x30));
+ sav->phy_cck_06 = b43_phy_read(dev, B43_PHY_CCK(0x06));
+ b43_phy_write(dev, B43_PHY_CCK(0x30), 0x00FF);
+ b43_phy_write(dev, B43_PHY_CCK(0x06), 0x3F3F);
} else {
b43_write16(dev, 0x3E2, b43_read16(dev, 0x3E2)
| 0x8000);
& 0xF000);
tmp =
- (phy->type == B43_PHYTYPE_G) ? B43_PHY_LO_MASK : B43_PHY_BASE(0x2E);
+ (phy->type == B43_PHYTYPE_G) ? B43_PHY_LO_MASK : B43_PHY_CCK(0x2E);
b43_phy_write(dev, tmp, 0x007F);
tmp = sav->phy_syncctl;
tmp = sav->radio_7A;
b43_radio_write16(dev, 0x007A, tmp & 0xFFF0);
- b43_phy_write(dev, B43_PHY_BASE(0x2A), 0x8A3);
+ b43_phy_write(dev, B43_PHY_CCK(0x2A), 0x8A3);
if (phy->type == B43_PHYTYPE_G ||
(phy->type == B43_PHYTYPE_B &&
phy->radio_ver == 0x2050 && phy->radio_rev >= 6)) {
- b43_phy_write(dev, B43_PHY_BASE(0x2B), 0x1003);
+ b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x1003);
} else
- b43_phy_write(dev, B43_PHY_BASE(0x2B), 0x0802);
+ b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802);
if (phy->rev >= 2)
b43_dummy_transmission(dev);
b43_radio_selectchannel(dev, 6, 0);
b43_radio_read16(dev, 0x51); /* dummy read */
if (phy->type == B43_PHYTYPE_G)
- b43_phy_write(dev, B43_PHY_BASE(0x2F), 0);
- if (lo->rebuild)
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0);
+
+ /* Re-measure the txctl values, if needed. */
+ if (time_before(lo->txctl_measured_time,
+ jiffies - B43_LO_TXCTL_EXPIRE))
lo_measure_txctl_values(dev);
+
if (phy->type == B43_PHYTYPE_G && phy->rev >= 3) {
b43_phy_write(dev, B43_PHY_LO_MASK, 0xC078);
} else {
if (phy->type == B43_PHYTYPE_B)
- b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x8078);
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8078);
else
b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
}
struct lo_g_saved_values *sav)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
u16 tmp;
if (phy->rev >= 2) {
tmp = (phy->pga_gain | 0xEFA0);
b43_phy_write(dev, B43_PHY_PGACTL, tmp);
}
- if (b43_has_hardware_pctl(phy)) {
- b43_gphy_dc_lt_init(dev);
- } else {
- if (lo->rebuild)
- b43_lo_g_adjust_to(dev, 3, 2, 0);
- else
- b43_lo_g_adjust(dev);
- }
if (phy->type == B43_PHYTYPE_G) {
if (phy->rev >= 3)
- b43_phy_write(dev, B43_PHY_BASE(0x2E), 0xC078);
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0xC078);
else
- b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x8078);
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8078);
if (phy->rev >= 2)
- b43_phy_write(dev, B43_PHY_BASE(0x2F), 0x0202);
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x0202);
else
- b43_phy_write(dev, B43_PHY_BASE(0x2F), 0x0101);
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x0101);
}
b43_write16(dev, 0x3F4, sav->reg_3F4);
b43_phy_write(dev, B43_PHY_PGACTL, sav->phy_pgactl);
- b43_phy_write(dev, B43_PHY_BASE(0x2A), sav->phy_base_2A);
+ b43_phy_write(dev, B43_PHY_CCK(0x2A), sav->phy_cck_2A);
b43_phy_write(dev, B43_PHY_SYNCCTL, sav->phy_syncctl);
b43_phy_write(dev, B43_PHY_DACCTL, sav->phy_dacctl);
b43_radio_write16(dev, 0x43, sav->radio_43);
b43_write16(dev, 0x3E2, sav->reg_3E2);
if (phy->type == B43_PHYTYPE_B &&
phy->radio_ver == 0x2050 && phy->radio_rev <= 5) {
- b43_phy_write(dev, B43_PHY_BASE(0x30), sav->phy_base_30);
- b43_phy_write(dev, B43_PHY_BASE(0x06), sav->phy_base_06);
+ b43_phy_write(dev, B43_PHY_CCK(0x30), sav->phy_cck_30);
+ b43_phy_write(dev, B43_PHY_CCK(0x06), sav->phy_cck_06);
}
if (phy->rev >= 2) {
b43_phy_write(dev, B43_PHY_ANALOGOVER, sav->phy_analogover);
b43_phy_write(dev, B43_PHY_CLASSCTL, sav->phy_classctl);
b43_phy_write(dev, B43_PHY_RFOVER, sav->phy_rfover);
b43_phy_write(dev, B43_PHY_RFOVERVAL, sav->phy_rfoverval);
- b43_phy_write(dev, B43_PHY_BASE(0x3E), sav->phy_base_3E);
+ b43_phy_write(dev, B43_PHY_CCK(0x3E), sav->phy_cck_3E);
b43_phy_write(dev, B43_PHY_CRS0, sav->phy_crs0);
}
if (b43_has_hardware_pctl(phy)) {
b43_phy_write(dev, B43_PHY_LO_MASK, tmp);
b43_phy_write(dev, B43_PHY_EXTG(0x01), sav->phy_extg_01);
b43_phy_write(dev, B43_PHY_DACCTL, sav->phy_dacctl_hwpctl);
- b43_phy_write(dev, B43_PHY_BASE(0x14), sav->phy_base_14);
+ b43_phy_write(dev, B43_PHY_CCK(0x14), sav->phy_cck_14);
b43_phy_write(dev, B43_PHY_HPWR_TSSICTL, sav->phy_hpwr_tssictl);
}
b43_radio_selectchannel(dev, sav->old_channel, 1);
struct b43_lo_g_statemachine *d)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
struct b43_loctl test_loctl;
struct b43_loctl orig_loctl;
struct b43_loctl prev_loctl = {
found_lower = 1;
d->lowest_feedth = feedth;
if ((d->nr_measured < 2) &&
- (!has_loopback_gain(phy) || lo->rebuild))
+ !has_loopback_gain(phy))
break;
}
}
int *max_rx_gain)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
struct b43_lo_g_statemachine d;
u16 feedth;
int found_lower;
d.nr_measured = 0;
d.state_val_multiplier = 1;
- if (has_loopback_gain(phy) && !lo->rebuild)
+ if (has_loopback_gain(phy))
d.state_val_multiplier = 3;
memcpy(&d.min_loctl, loctl, sizeof(struct b43_loctl));
- if (has_loopback_gain(phy) && lo->rebuild)
+ if (has_loopback_gain(phy))
max_repeat = 4;
do {
b43_lo_write(dev, &d.min_loctl);
feedth = lo_measure_feedthrough(dev, phy->lna_gain,
phy->pga_gain,
phy->trsw_rx_gain);
- if (!lo->rebuild && feedth < 0x258) {
+ if (feedth < 0x258) {
if (feedth >= 0x12C)
*max_rx_gain += 6;
else
} while (++repeat_cnt < max_repeat);
}
-#if B43_CALIB_ALL_LOCTLS
-static const struct b43_rfatt b43_full_rfatt_list_items[] = {
- { .att = 0, .with_padmix = 0, },
- { .att = 1, .with_padmix = 0, },
- { .att = 2, .with_padmix = 0, },
- { .att = 3, .with_padmix = 0, },
- { .att = 4, .with_padmix = 0, },
- { .att = 5, .with_padmix = 0, },
- { .att = 6, .with_padmix = 0, },
- { .att = 7, .with_padmix = 0, },
- { .att = 8, .with_padmix = 0, },
- { .att = 9, .with_padmix = 0, },
- { .att = 10, .with_padmix = 0, },
- { .att = 11, .with_padmix = 0, },
- { .att = 12, .with_padmix = 0, },
- { .att = 13, .with_padmix = 0, },
- { .att = 14, .with_padmix = 0, },
- { .att = 15, .with_padmix = 0, },
- { .att = 0, .with_padmix = 1, },
- { .att = 1, .with_padmix = 1, },
- { .att = 2, .with_padmix = 1, },
- { .att = 3, .with_padmix = 1, },
- { .att = 4, .with_padmix = 1, },
- { .att = 5, .with_padmix = 1, },
- { .att = 6, .with_padmix = 1, },
- { .att = 7, .with_padmix = 1, },
- { .att = 8, .with_padmix = 1, },
- { .att = 9, .with_padmix = 1, },
- { .att = 10, .with_padmix = 1, },
- { .att = 11, .with_padmix = 1, },
- { .att = 12, .with_padmix = 1, },
- { .att = 13, .with_padmix = 1, },
- { .att = 14, .with_padmix = 1, },
- { .att = 15, .with_padmix = 1, },
-};
-static const struct b43_rfatt_list b43_full_rfatt_list = {
- .list = b43_full_rfatt_list_items,
- .len = ARRAY_SIZE(b43_full_rfatt_list_items),
-};
-
-static const struct b43_bbatt b43_full_bbatt_list_items[] = {
- { .att = 0, },
- { .att = 1, },
- { .att = 2, },
- { .att = 3, },
- { .att = 4, },
- { .att = 5, },
- { .att = 6, },
- { .att = 7, },
- { .att = 8, },
- { .att = 9, },
- { .att = 10, },
- { .att = 11, },
-};
-static const struct b43_bbatt_list b43_full_bbatt_list = {
- .list = b43_full_bbatt_list_items,
- .len = ARRAY_SIZE(b43_full_bbatt_list_items),
-};
-#endif /* B43_CALIB_ALL_LOCTLS */
-
-static void lo_measure(struct b43_wldev *dev)
+static
+struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
struct b43_loctl loctl = {
.i = 0,
.q = 0,
};
- struct b43_loctl *ploctl;
int max_rx_gain;
- int rfidx, bbidx;
- const struct b43_bbatt_list *bbatt_list;
- const struct b43_rfatt_list *rfatt_list;
-
+ struct b43_lo_calib *cal;
+ struct lo_g_saved_values uninitialized_var(saved_regs);
/* Values from the "TXCTL Register and Value Table" */
u16 txctl_reg;
u16 txctl_value;
u16 pad_mix_gain;
- bbatt_list = &lo->bbatt_list;
- rfatt_list = &lo->rfatt_list;
-#if B43_CALIB_ALL_LOCTLS
- bbatt_list = &b43_full_bbatt_list;
- rfatt_list = &b43_full_rfatt_list;
-#endif
+ saved_regs.old_channel = phy->channel;
+ b43_mac_suspend(dev);
+ lo_measure_setup(dev, &saved_regs);
txctl_reg = lo_txctl_register_table(dev, &txctl_value, &pad_mix_gain);
- for (rfidx = 0; rfidx < rfatt_list->len; rfidx++) {
-
- b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43)
- & 0xFFF0) |
- rfatt_list->list[rfidx].att);
- b43_radio_write16(dev, txctl_reg,
- (b43_radio_read16(dev, txctl_reg)
- & ~txctl_value)
- | (rfatt_list->list[rfidx].with_padmix ?
- txctl_value : 0));
-
- for (bbidx = 0; bbidx < bbatt_list->len; bbidx++) {
- if (lo->rebuild) {
-#if B43_CALIB_ALL_LOCTLS
- ploctl = b43_get_lo_g_ctl(dev,
- &rfatt_list->list[rfidx],
- &bbatt_list->list[bbidx]);
-#else
- ploctl = b43_get_lo_g_ctl_nopadmix(dev,
- &rfatt_list->
- list[rfidx],
- &bbatt_list->
- list[bbidx]);
-#endif
- } else {
- ploctl = b43_get_lo_g_ctl(dev,
- &rfatt_list->list[rfidx],
- &bbatt_list->list[bbidx]);
- if (!ploctl->used)
- continue;
- }
- memcpy(&loctl, ploctl, sizeof(loctl));
- loctl.i = 0;
- loctl.q = 0;
-
- max_rx_gain = rfatt_list->list[rfidx].att * 2;
- max_rx_gain += bbatt_list->list[bbidx].att / 2;
- if (rfatt_list->list[rfidx].with_padmix)
- max_rx_gain -= pad_mix_gain;
- if (has_loopback_gain(phy))
- max_rx_gain += phy->max_lb_gain;
- lo_measure_gain_values(dev, max_rx_gain,
- has_loopback_gain(phy));
-
- b43_phy_set_baseband_attenuation(dev,
- bbatt_list->list[bbidx].att);
- lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
- if (phy->type == B43_PHYTYPE_B) {
- loctl.i++;
- loctl.q++;
- }
- b43_loctl_set_calibrated(&loctl, 1);
- memcpy(ploctl, &loctl, sizeof(loctl));
- }
- }
-}
-
-#if B43_DEBUG
-static void do_validate_loctl(struct b43_wldev *dev, struct b43_loctl *control)
-{
- const int is_initializing = (b43_status(dev) == B43_STAT_UNINIT);
- int i = control->i;
- int q = control->q;
+ b43_radio_write16(dev, 0x43,
+ (b43_radio_read16(dev, 0x43) & 0xFFF0)
+ | rfatt->att);
+ b43_radio_write16(dev, txctl_reg,
+ (b43_radio_read16(dev, txctl_reg) & ~txctl_value)
+ | (rfatt->with_padmix) ? txctl_value : 0);
- if (b43_loctl_is_calibrated(control)) {
- if ((abs(i) > 16) || (abs(q) > 16))
- goto error;
- } else {
- if (control->used)
- goto error;
- if (dev->phy.lo_control->rebuild) {
- control->i = 0;
- control->q = 0;
- if ((i != B43_LOCTL_POISON) ||
- (q != B43_LOCTL_POISON))
- goto error;
- }
+ max_rx_gain = rfatt->att * 2;
+ max_rx_gain += bbatt->att / 2;
+ if (rfatt->with_padmix)
+ max_rx_gain -= pad_mix_gain;
+ if (has_loopback_gain(phy))
+ max_rx_gain += phy->max_lb_gain;
+ lo_measure_gain_values(dev, max_rx_gain,
+ has_loopback_gain(phy));
+
+ b43_phy_set_baseband_attenuation(dev, bbatt->att);
+ lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
+
+ lo_measure_restore(dev, &saved_regs);
+ b43_mac_enable(dev);
+
+ if (b43_debug(dev, B43_DBG_LO)) {
+ b43dbg(dev->wl, "LO: Calibrated for BB(%u), RF(%u,%u) "
+ "=> I=%d Q=%d\n",
+ bbatt->att, rfatt->att, rfatt->with_padmix,
+ loctl.i, loctl.q);
}
- if (is_initializing && control->used)
- goto error;
-
- return;
-error:
- b43err(dev->wl, "LO control pair validation failed "
- "(I: %d, Q: %d, used %u, calib: %u, initing: %d)\n",
- i, q, control->used,
- b43_loctl_is_calibrated(control),
- is_initializing);
-}
-static void validate_all_loctls(struct b43_wldev *dev)
-{
- b43_call_for_each_loctl(dev, do_validate_loctl);
-}
-
-static void do_reset_calib(struct b43_wldev *dev, struct b43_loctl *control)
-{
- if (dev->phy.lo_control->rebuild ||
- control->used) {
- b43_loctl_set_calibrated(control, 0);
- control->i = B43_LOCTL_POISON;
- control->q = B43_LOCTL_POISON;
+ cal = kmalloc(sizeof(*cal), GFP_KERNEL);
+ if (!cal) {
+ b43warn(dev->wl, "LO calib: out of memory\n");
+ return NULL;
}
+ memcpy(&cal->bbatt, bbatt, sizeof(*bbatt));
+ memcpy(&cal->rfatt, rfatt, sizeof(*rfatt));
+ memcpy(&cal->ctl, &loctl, sizeof(loctl));
+ cal->calib_time = jiffies;
+ INIT_LIST_HEAD(&cal->list);
+
+ return cal;
}
-static void reset_all_loctl_calibration_states(struct b43_wldev *dev)
+/* Get a calibrated LO setting for the given attenuation values.
+ * Might return a NULL pointer under OOM! */
+static
+struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
- b43_call_for_each_loctl(dev, do_reset_calib);
+ struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+ struct b43_lo_calib *c;
+
+ c = b43_find_lo_calib(lo, bbatt, rfatt);
+ if (c)
+ return c;
+ /* Not in the list of calibrated LO settings.
+ * Calibrate it now. */
+ c = b43_calibrate_lo_setting(dev, bbatt, rfatt);
+ if (!c)
+ return NULL;
+ list_add(&c->list, &lo->calib_list);
+
+ return c;
}
-#else /* B43_DEBUG */
-static inline void validate_all_loctls(struct b43_wldev *dev) { }
-static inline void reset_all_loctl_calibration_states(struct b43_wldev *dev) { }
-#endif /* B43_DEBUG */
-
-void b43_lo_g_measure(struct b43_wldev *dev)
+void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all)
{
struct b43_phy *phy = &dev->phy;
- struct lo_g_saved_values uninitialized_var(sav);
-
- B43_WARN_ON((phy->type != B43_PHYTYPE_B) &&
- (phy->type != B43_PHYTYPE_G));
-
- sav.old_channel = phy->channel;
- lo_measure_setup(dev, &sav);
- reset_all_loctl_calibration_states(dev);
- lo_measure(dev);
- lo_measure_restore(dev, &sav);
-
- validate_all_loctls(dev);
+ struct b43_txpower_lo_control *lo = phy->lo_control;
+ int i;
+ int rf_offset, bb_offset;
+ const struct b43_rfatt *rfatt;
+ const struct b43_bbatt *bbatt;
+ u64 power_vector;
+ bool table_changed = 0;
- phy->lo_control->lo_measured = 1;
- phy->lo_control->rebuild = 0;
-}
+ BUILD_BUG_ON(B43_DC_LT_SIZE != 32);
+ B43_WARN_ON(lo->rfatt_list.len * lo->bbatt_list.len > 64);
-#if B43_DEBUG
-static void validate_loctl_calibration(struct b43_wldev *dev,
- struct b43_loctl *loctl,
- struct b43_rfatt *rfatt,
- struct b43_bbatt *bbatt)
-{
- if (b43_loctl_is_calibrated(loctl))
- return;
- if (!dev->phy.lo_control->lo_measured) {
- /* On init we set the attenuation values before we
- * calibrated the LO. I guess that's OK. */
- return;
+ power_vector = lo->power_vector;
+ if (!update_all && !power_vector)
+ return; /* Nothing to do. */
+
+ /* Suspend the MAC now to avoid continuous suspend/enable
+ * cycles in the loop. */
+ b43_mac_suspend(dev);
+
+ for (i = 0; i < B43_DC_LT_SIZE * 2; i++) {
+ struct b43_lo_calib *cal;
+ int idx;
+ u16 val;
+
+ if (!update_all && !(power_vector & (((u64)1ULL) << i)))
+ continue;
+ /* Update the table entry for this power_vector bit.
+ * The table rows are RFatt entries and columns are BBatt. */
+ bb_offset = i / lo->rfatt_list.len;
+ rf_offset = i % lo->rfatt_list.len;
+ bbatt = &(lo->bbatt_list.list[bb_offset]);
+ rfatt = &(lo->rfatt_list.list[rf_offset]);
+
+ cal = b43_calibrate_lo_setting(dev, bbatt, rfatt);
+ if (!cal) {
+ b43warn(dev->wl, "LO: Could not "
+ "calibrate DC table entry\n");
+ continue;
+ }
+ /*FIXME: Is Q really in the low nibble? */
+ val = (u8)(cal->ctl.q);
+ val |= ((u8)(cal->ctl.i)) << 4;
+ kfree(cal);
+
+ /* Get the index into the hardware DC LT. */
+ idx = i / 2;
+ /* Change the table in memory. */
+ if (i % 2) {
+ /* Change the high byte. */
+ lo->dc_lt[idx] = (lo->dc_lt[idx] & 0x00FF)
+ | ((val & 0x00FF) << 8);
+ } else {
+ /* Change the low byte. */
+ lo->dc_lt[idx] = (lo->dc_lt[idx] & 0xFF00)
+ | (val & 0x00FF);
+ }
+ table_changed = 1;
}
- b43err(dev->wl, "Adjusting Local Oscillator to an uncalibrated "
- "control pair: rfatt=%u,%spadmix bbatt=%u\n",
- rfatt->att,
- (rfatt->with_padmix) ? "" : "no-",
- bbatt->att);
-}
-#else
-static inline void validate_loctl_calibration(struct b43_wldev *dev,
- struct b43_loctl *loctl,
- struct b43_rfatt *rfatt,
- struct b43_bbatt *bbatt)
-{
+ if (table_changed) {
+ /* The table changed in memory. Update the hardware table. */
+ for (i = 0; i < B43_DC_LT_SIZE; i++)
+ b43_phy_write(dev, 0x3A0 + i, lo->dc_lt[i]);
+ }
+ b43_mac_enable(dev);
}
-#endif
-static inline void fixup_rfatt_for_txcontrol(struct b43_rfatt *rf,
- u8 tx_control)
+/* Fixup the RF attenuation value for the case where we are
+ * using the PAD mixer. */
+static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf)
{
- if (tx_control & B43_TXCTL_TXMIX) {
- if (rf->att < 5)
- rf->att = 4;
- }
+ if (!rf->with_padmix)
+ return;
+ if ((rf->att != 1) && (rf->att != 2) && (rf->att != 3))
+ rf->att = 4;
}
void b43_lo_g_adjust(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_lo_calib *cal;
struct b43_rfatt rf;
- struct b43_loctl *loctl;
memcpy(&rf, &phy->rfatt, sizeof(rf));
- fixup_rfatt_for_txcontrol(&rf, phy->tx_control);
+ b43_lo_fixup_rfatt(&rf);
- loctl = b43_get_lo_g_ctl(dev, &rf, &phy->bbatt);
- validate_loctl_calibration(dev, loctl, &rf, &phy->bbatt);
- b43_lo_write(dev, loctl);
+ cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf);
+ if (!cal)
+ return;
+ b43_lo_write(dev, &cal->ctl);
}
void b43_lo_g_adjust_to(struct b43_wldev *dev,
{
struct b43_rfatt rf;
struct b43_bbatt bb;
- struct b43_loctl *loctl;
+ struct b43_lo_calib *cal;
memset(&rf, 0, sizeof(rf));
memset(&bb, 0, sizeof(bb));
rf.att = rfatt;
bb.att = bbatt;
- fixup_rfatt_for_txcontrol(&rf, tx_control);
- loctl = b43_get_lo_g_ctl(dev, &rf, &bb);
- validate_loctl_calibration(dev, loctl, &rf, &bb);
- b43_lo_write(dev, loctl);
+ b43_lo_fixup_rfatt(&rf);
+ cal = b43_get_calib_lo_settings(dev, &bb, &rf);
+ if (!cal)
+ return;
+ b43_lo_write(dev, &cal->ctl);
}
-static void do_mark_unused(struct b43_wldev *dev, struct b43_loctl *control)
+/* Periodic LO maintanance work */
+void b43_lo_g_maintanance_work(struct b43_wldev *dev)
{
- control->used = 0;
+ struct b43_phy *phy = &dev->phy;
+ struct b43_txpower_lo_control *lo = phy->lo_control;
+ unsigned long now;
+ unsigned long expire;
+ struct b43_lo_calib *cal, *tmp;
+ bool current_item_expired = 0;
+ bool hwpctl;
+
+ if (!lo)
+ return;
+ now = jiffies;
+ hwpctl = b43_has_hardware_pctl(phy);
+
+ if (hwpctl) {
+ /* Read the power vector and update it, if needed. */
+ expire = now - B43_LO_PWRVEC_EXPIRE;
+ if (time_before(lo->pwr_vec_read_time, expire)) {
+ lo_read_power_vector(dev);
+ b43_gphy_dc_lt_init(dev, 0);
+ }
+ //FIXME Recalc the whole DC table from time to time?
+ }
+
+ if (hwpctl)
+ return;
+ /* Search for expired LO settings. Remove them.
+ * Recalibrate the current setting, if expired. */
+ expire = now - B43_LO_CALIB_EXPIRE;
+ list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) {
+ if (!time_before(cal->calib_time, expire))
+ continue;
+ /* This item expired. */
+ if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) &&
+ b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) {
+ B43_WARN_ON(current_item_expired);
+ current_item_expired = 1;
+ }
+ if (b43_debug(dev, B43_DBG_LO)) {
+ b43dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), "
+ "I=%d, Q=%d expired\n",
+ cal->bbatt.att, cal->rfatt.att,
+ cal->rfatt.with_padmix,
+ cal->ctl.i, cal->ctl.q);
+ }
+ list_del(&cal->list);
+ kfree(cal);
+ }
+ if (current_item_expired || unlikely(list_empty(&lo->calib_list))) {
+ /* Recalibrate currently used LO setting. */
+ if (b43_debug(dev, B43_DBG_LO))
+ b43dbg(dev->wl, "LO: Recalibrating current LO setting\n");
+ cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt);
+ if (cal) {
+ list_add(&cal->list, &lo->calib_list);
+ b43_lo_write(dev, &cal->ctl);
+ } else
+ b43warn(dev->wl, "Failed to recalibrate current LO setting\n");
+ }
}
-void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev)
+void b43_lo_g_cleanup(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+ struct b43_lo_calib *cal, *tmp;
- b43_call_for_each_loctl(dev, do_mark_unused);
- lo->rebuild = 1;
+ if (!lo)
+ return;
+ list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) {
+ list_del(&cal->list);
+ kfree(cal);
+ }
}
-void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev)
+/* LO Initialization */
+void b43_lo_g_init(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- struct b43_rfatt rf;
- memcpy(&rf, &phy->rfatt, sizeof(rf));
- fixup_rfatt_for_txcontrol(&rf, phy->tx_control);
-
- b43_get_lo_g_ctl(dev, &rf, &phy->bbatt)->used = 1;
+ if (b43_has_hardware_pctl(phy)) {
+ lo_read_power_vector(dev);
+ b43_gphy_dc_lt_init(dev, 1);
+ }
}
projects / openwrt.git / blobdiff