#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id$
-EMENU:=Other modules
+OTHER_MENU:=Other modules
define KernelPackage/crc-itu-t
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=CRC ITU-T V.41 support
- DESCRIPTION:=Kernel module for CRC ITU-T V.41 support
KCONFIG:=CONFIG_CRC_ITU_T
FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
endef
+define KernelPackage/crc-itu-t/description
+ Kernel module for CRC ITU-T V.41 support
+endef
+
$(eval $(call KernelPackage,crc-itu-t))
-define KernelPackage/crypto
- SUBMENU:=$(EMENU)
- TITLE:=CryptoAPI modules
- KCONFIG:= \
- CONFIG_CRYPTO_HMAC \
- CONFIG_CRYPTO_NULL \
- CONFIG_CRYPTO_MD4 \
- CONFIG_CRYPTO_MD5 \
- CONFIG_CRYPTO_SHA1 \
- CONFIG_CRYPTO_SHA256 \
- CONFIG_CRYPTO_SHA512 \
- CONFIG_CRYPTO_WP512 \
- CONFIG_CRYPTO_TGR192 \
- CONFIG_CRYPTO_DES \
- CONFIG_CRYPTO_BLOWFISH \
- CONFIG_CRYPTO_TWOFISH \
- CONFIG_CRYPTO_SERPENT \
- CONFIG_CRYPTO_AES \
- CONFIG_CRYPTO_CAST5 \
- CONFIG_CRYPTO_CAST6 \
- CONFIG_CRYPTO_TEA \
- CONFIG_CRYPTO_ARC4 \
- CONFIG_CRYPTO_KHAZAD \
- CONFIG_CRYPTO_ANUBIS \
- CONFIG_CRYPTO_DEFLATE \
- CONFIG_CRYPTO_MICHAEL_MIC \
- CONFIG_CRYPTO_CRC32C \
- CONFIG_CRYPTO_ECB \
- CONFIG_CRYPTO_BLKCIPHER
- FILES:=$(LINUX_DIR)/crypto/*.$(LINUX_KMOD_SUFFIX)
-endef
-
-$(eval $(call KernelPackage,crypto))
+define KernelPackage/crc7
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC7 support
+ KCONFIG:=CONFIG_CRC7
+ FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc7)
+endef
+
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support
+endef
+
+$(eval $(call KernelPackage,crc7))
define KernelPackage/eeprom-93cx6
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
- DESCRIPTION:=Kernel module for EEPROM 93CX6 support
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_EEPROM_93CX6
FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
+define KernelPackage/eeprom-93cx6/description
+ Kernel module for EEPROM 93CX6 support
+endef
+
$(eval $(call KernelPackage,eeprom-93cx6))
define KernelPackage/lp
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
DEPENDS:=@LINUX_2_4
KCONFIG:= \
$(eval $(call KernelPackage,lp))
-define KernelPackage/soundcore
- SUBMENU:=$(EMENU)
- TITLE:=Sound support
- DESCRIPTION:=Kernel modules for sound support
- KCONFIG:=CONFIG_SOUND
-endef
-
-define KernelPackage/soundcore/2.4
- FILES:=$(LINUX_DIR)/drivers/sound/soundcore.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore)
-endef
-
-define KernelPackage/soundcore/2.6
- KCONFIG+= \
- CONFIG_SND \
- CONFIG_SND_HWDEP \
- CONFIG_SND_RAWMIDI \
- CONFIG_SND_TIMER \
- CONFIG_SND_PCM
- FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-page-alloc.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-hwdep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-rawmidi.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-timer.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-pcm.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_SND_MIXER_OSS),$(LINUX_DIR)/sound/core/oss/snd-mixer-oss.$(LINUX_KMOD_SUFFIX)) \
- $(if $(CONFIG_SND_PCM_OSS),$(LINUX_DIR)/sound/core/oss/snd-pcm-oss.$(LINUX_KMOD_SUFFIX))
- AUTOLOAD:=$(call AutoLoad,30, \
- soundcore \
- snd \
- snd-page-alloc \
- snd-hwdep \
- snd-rawmidi \
- snd-timer \
- snd-pcm \
- $(if $(CONFIG_SND_MIXER_OSS),snd-mixer-oss) \
- $(if $(CONFIG_SND_PCM_OSS),snd-pcm-oss) \
- )
-endef
-
-define KernelPackage/soundcore/uml-2.6
- KCONFIG+= \
- CONFIG_HOSTAUDIO
- FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/arch/um/drivers/hostaudio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore hostaudio)
-endef
-
-$(eval $(call KernelPackage,soundcore))
-
-
-define KernelPackage/loop
- SUBMENU:=$(EMENU)
- TITLE:=Loopback device support
- DESCRIPTION:=Kernel module for loopback device support
- KCONFIG:=CONFIG_BLK_DEV_LOOP
- FILES:=$(LINUX_DIR)/drivers/block/loop.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,loop)
-endef
-
-$(eval $(call KernelPackage,loop))
-
-
-define KernelPackage/nbd
- SUBMENU:=$(EMENU)
- TITLE:=Network block device support
- DESCRIPTION:=Kernel module for network block device support
- KCONFIG:=CONFIG_BLK_DEV_NBD
- FILES:=$(LINUX_DIR)/drivers/block/nbd.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,nbd)
-endef
-
-$(eval $(call KernelPackage,nbd))
-
-
-define KernelPackage/capi
- SUBMENU:=$(EMENU)
- TITLE:=CAPI Support
- DESCRIPTION:=Kernel module for basic CAPI support
- DEPENDS:=@LINUX_2_6
- KCONFIG:= \
- CONFIG_ISDN \
- CONFIG_ISDN_CAPI \
- CONFIG_ISDN_CAPI_CAPI20
- FILES:= \
- $(LINUX_DIR)/drivers/isdn/capi/kernelcapi.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/isdn/capi/capi.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,kernelcapi capi)
-endef
-
-$(eval $(call KernelPackage,capi))
-
-
define KernelPackage/pcmcia-core
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=PCMCIA/CardBus support
- DESCRIPTION:=Kernel support for PCMCIA/CardBus controllers
DEPENDS:=@PCMCIA_SUPPORT
+ KCONFIG:= \
+ CONFIG_PCMCIA \
+ CONFIG_CARDBUS \
+ CONFIG_PCCARD \
+ CONFIG_YENTA \
+ CONFIG_PCCARD_NONSTATIC \
+ PCMCIA_DEBUG=n
endef
define KernelPackage/pcmcia-core/2.4
- KCONFIG:= \
- CONFIG_PCMCIA \
- CONFIG_CARDBUS
+# KCONFIG:= \
+# CONFIG_PCMCIA \
+# CONFIG_CARDBUS
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
endef
define KernelPackage/pcmcia-core/2.6
- KCONFIG:= \
- CONFIG_PCCARD \
- CONFIG_PCMCIA \
- CONFIG_YENTA \
- CONFIG_PCCARD_NONSTATIC \
- PCMCIA_DEBUG=n
+# KCONFIG:= \
+# CONFIG_PCCARD \
+# CONFIG_PCMCIA \
+# CONFIG_YENTA \
+# CONFIG_PCCARD_NONSTATIC \
+# PCMCIA_DEBUG=n
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic au1x00_ss)
endef
+define KernelPackage/pcmcia-core/description
+ Kernel support for PCMCIA/CardBus controllers
+endef
$(eval $(call KernelPackage,pcmcia-core))
define KernelPackage/pcmcia-serial
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Serial devices support
- DESCRIPTION:=Kernel support for PCMCIA/CardBus serial devices
DEPENDS:=kmod-pcmcia-core
+ KCONFIG:= \
+ CONFIG_PCMCIA_SERIAL_CS \
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
define KernelPackage/pcmcia-serial/2.4
- KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
+# KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/pcmcia-serial/2.6
- KCONFIG:=CONFIG_SERIAL_8250_CS
+# KCONFIG:=CONFIG_SERIAL_8250_CS
FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
+define KernelPackage/pcmcia-serial/description
+ Kernel support for PCMCIA/CardBus serial devices
+endef
+
$(eval $(call KernelPackage,pcmcia-serial))
define KernelPackage/bluetooth
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
DEPENDS:=@USB_SUPPORT
- DESCRIPTION:=Kernel support for Bluetooth devices
-endef
-
-define KernelPackage/bluetooth/2.4
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BLUEZ_RFCOMM \
CONFIG_BLUEZ_BNEP \
CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB
+ CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BT \
+ CONFIG_BT_L2CAP \
+ CONFIG_BT_SCO \
+ CONFIG_BT_RFCOMM \
+ CONFIG_BT_BNEP \
+ CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIUART
+endef
+
+define KernelPackage/bluetooth/2.4
+# KCONFIG:= \
+# CONFIG_BLUEZ \
+# CONFIG_BLUEZ_L2CAP \
+# CONFIG_BLUEZ_SCO \
+# CONFIG_BLUEZ_RFCOMM \
+# CONFIG_BLUEZ_BNEP \
+# CONFIG_BLUEZ_HCIUART \
+# CONFIG_BLUEZ_HCIUSB
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
endef
define KernelPackage/bluetooth/2.6
- KCONFIG:= \
- CONFIG_BT \
- CONFIG_BT_L2CAP \
- CONFIG_BT_SCO \
- CONFIG_BT_RFCOMM \
- CONFIG_BT_BNEP \
- CONFIG_BT_HCIUSB \
- CONFIG_BT_HCIUART
+# KCONFIG:= \
+# CONFIG_BT \
+# CONFIG_BT_L2CAP \
+# CONFIG_BT_SCO \
+# CONFIG_BT_RFCOMM \
+# CONFIG_BT_BNEP \
+# CONFIG_BT_HCIUSB \
+# CONFIG_BT_HCIUART
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
endef
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices
+endef
+
$(eval $(call KernelPackage,bluetooth))
define KernelPackage/mmc
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@LINUX_2_6_AT91
- DESCRIPTION:=Kernel support for MMC/SD cards
+ DEPENDS:=@LINUX_2_6
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
- CONFIG_MMC_AT91
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
+ CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/mmc_block.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
+endef
+
+define KernelPackage/mmc/description
+ Kernel support for MMC/SD cards
endef
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mmc-at91
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD Card Support on AT91
+ DEPENDS:=@TARGET_at91 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_AT91
+ FILES:=$(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
+# XXX: added a workaround for watchdog path changes
+ifeq ($(KERNEL),2.4)
+ WATCHDOG_DIR=char
+endif
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
+ WATCHDOG_DIR=watchdog
+endif
+WATCHDOG_DIR?=char/watchdog
+
+define KernelPackage/atmel-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AT32AP700x watchdog
+ DEPENDS:=@TARGET_avr32
+ KCONFIG:=CONFIG_AT32AP700X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+
define KernelPackage/softdog
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- DESCRIPTION:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
-define KernelPackage/softdog/2.4
- FILES:=$(LINUX_DIR)/drivers/char/softdog.o
+define KernelPackage/softdog/description
+ Software watchdog driver
endef
-define KernelPackage/softdog/2.6
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/softdog.ko
+$(eval $(call KernelPackage,softdog))
+
+
+define KernelPackage/leds-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO LED support
+ DEPENDS:= @GPIO_SUPPORT
+ KCONFIG:=CONFIG_LEDS_GPIO
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
endef
-$(eval $(call KernelPackage,softdog))
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
+endef
+
+$(eval $(call KernelPackage,leds-gpio))
-define KernelPackage/videodev
- SUBMENU:=$(EMENU)
- TITLE=Video4Linux support
- DESCRIPTION:=Kernel modules for Video4Linux support
- KCONFIG:=CONFIG_VIDEO_DEV
+define KernelPackage/leds-adm5120
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ADM5120 LED support
+ DEPENDS:=@TARGET_adm5120 +kmod-leds-gpio @LINUX_2_6_25
+ KCONFIG:=CONFIG_LEDS_ADM5120
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-adm5120.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,59,leds-adm5120)
endef
-define KernelPackage/videodev/2.4
- FILES:=$(LINUX_DIR)/drivers/media/video/videodev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,videodev)
+define KernelPackage/leds-adm5120/description
+ Kernel module for LEDs on ADM5120 based boards.
endef
-define KernelPackage/videodev/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/media/video/v4l2-common.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_VIDEO_V4L1_COMPAT),$(LINUX_DIR)/drivers/media/video/v4l1-compat.$(LINUX_KMOD_SUFFIX)) \
- $(LINUX_DIR)/drivers/media/video/compat_ioctl32.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/media/video/videodev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60, \
- v4l2-common \
- $(if $(CONFIG_VIDEO_V4L1_COMPAT),v4l1-compat) \
- compat_ioctl32 \
- videodev \
- )
+$(eval $(call KernelPackage,leds-adm5120))
+
+
+define KernelPackage/ledtrig-adm5120-switch
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED ADM5120 Switch Port Status Trigger
+ DEPENDS:=@TARGET_adm5120
+ KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
endef
-$(eval $(call KernelPackage,videodev))
+define KernelPackage/ledtrig-adm5120-switch/description
+ Kernel module to allow LEDs to be controlled by the port states
+ of the ADM5120 built-in ethernet switch.
+endef
+
+$(eval $(call KernelPackage,ledtrig-adm5120-switch))
define KernelPackage/leds-net48xx
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
- DESCRIPTION:=Kernel module for Soekris Net48xx LEDs
- DEPENDS:=@LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_LEDS_NET48XX
FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
endef
+define KernelPackage/leds-net48xx/description
+ Kernel module for Soekris Net48xx LEDs
+endef
+
$(eval $(call KernelPackage,leds-net48xx))
+define KernelPackage/leds-wrap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines WRAP LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_WRAP
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+endef
+
+define KernelPackage/leds-wrap/description
+ Kernel module for PCengines WRAP LEDs
+endef
+
+$(eval $(call KernelPackage,leds-wrap))
+
+
+define KernelPackage/leds-alix
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines ALIX LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_ALIX
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
+
+
+define KernelPackage/ledtrig-netdev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED NETDEV Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+endef
+
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
+endef
+
+$(eval $(call KernelPackage,ledtrig-netdev))
+
+
+define KernelPackage/ledtrig-morse
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED Morse Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+endef
+
+define KernelPackage/ledtrig-morse/description
+ Kernel module to show morse coded messages on LEDs.
+endef
+
+$(eval $(call KernelPackage,ledtrig-morse))
+
+
+define KernelPackage/gpio-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
+endef
+
+$(eval $(call KernelPackage,gpio-dev))
+
+
define KernelPackage/nsc-gpio
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi GPIO support
- DESCRIPTION:=Kernel module for Natsemi GPIO
- DEPENDS:=@LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_NSC_GPIO
FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
endef
+define KernelPackage/nsc-gpio/description
+ Kernel module for Natsemi GPIO
+endef
+
$(eval $(call KernelPackage,nsc-gpio))
define KernelPackage/scx200-gpio
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 GPIO support
- DESCRIPTION:=Kernel module for SCX200 GPIO
- DEPENDS:=kmod-nsc-gpio @LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86 kmod-nsc-gpio
KCONFIG:=CONFIG_SCx200_GPIO
FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
endef
+define KernelPackage/scx200-gpio/description
+ Kernel module for SCX200 GPIO
+endef
+
$(eval $(call KernelPackage,scx200-gpio))
define KernelPackage/scx200-wdt
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 Watchdog support
- DESCRIPTION:=Kernel module for SCX200 Watchdog
- DEPENDS:=@LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
-$(eval $(call KernelPackage,scx200-wdt))
-
-
-define KernelPackage/hwmon
- SUBMENU:=$(EMENU)
- TITLE:=Hardware monitoring support
- DESCRIPTION:=Kernel modules for hardware monitoring
- DEPENDS:=@LINUX_2_6
- KCONFIG:= \
- CONFIG_HWMON \
- CONFIG_HWMON_VID \
- CONFIG_HWMON_DEBUG_CHIP=n
- FILES:= \
- $(LINUX_DIR)/drivers/hwmon/hwmon.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/hwmon/hwmon-vid.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,hwmon hwmon-vid)
-endef
-
-$(eval $(call KernelPackage,hwmon))
-
-
-define KernelPackage/hwmon-pc87360
- SUBMENU:=$(EMENU)
- TITLE:=PC87360 monitoring support
- DESCRIPTION:=Kernel modules for PC87360 chips
- DEPENDS:=kmod-hwmon
- KCONFIG:=CONFIG_SENSORS_PC87360
- FILES:=$(LINUX_DIR)/drivers/hwmon/pc87360.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,pc87360)
+define KernelPackage/scx200-wdt/description
+ Kernel module for SCX200 Watchdog
endef
-$(eval $(call KernelPackage,hwmon-pc87360))
+$(eval $(call KernelPackage,scx200-wdt))
define KernelPackage/input-core
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
- DESCRIPTION:=Kernel modules for support of input device
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,input-core)
endef
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
+endef
+
$(eval $(call KernelPackage,input-core))
define KernelPackage/input-evdev
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Input even device
- DESCRIPTION:=Kernel modules for support of input device events
DEPENDS:=+kmod-input-core
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,evdev)
endef
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Input even device
+ DEPENDS:=+kmod-input-core +kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-polldev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled Input device support
+ DEPENDS:=+kmod-input-core @LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,input-polldev)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-gpio-buttons
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+endef
+
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+
+define KernelPackage/mmc-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD over SPI Support
+ DEPENDS:=@LINUX_2_6 +kmod-mmc +kmod-crc-itu-t +kmod-crc7
+ KCONFIG:=CONFIG_MMC_SPI \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
+endef
+
+define KernelPackage/mmc-spi/description
+ Kernel support for MMC/SD over SPI
+endef
+
+$(eval $(call KernelPackage,mmc-spi))
+
+define KernelPackage/mmc-atmelmci
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Amtel MMC Support
+ DEPENDS:=@TARGET_avr32 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_ATMELMCI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+endef
+
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for Atmel Multimedia Card Interface.
+endef
+
+$(eval $(call KernelPackage,mmc-atmelmci))
+
+define KernelPackage/spi-bitbang
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Serial Peripheral Interface bitbanging library
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_SPI_BITBANG \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_bitbang.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spi_bitbang)
+endef
+
+define KernelPackage/spi-bitbang/description
+ This package contains the SPI bitbanging library
+endef
+
+$(eval $(call KernelPackage,spi-bitbang))
+
+define KernelPackage/spi-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO based bitbanging SPI controller
+ DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
+ KCONFIG:=CONFIG_SPI_GPIO
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,92,spi_gpio)
+endef
+
+define KernelPackage/spi-gpio/description
+ This package contains the GPIO based bitbanging SPI controller driver
+endef
+
+$(eval $(call KernelPackage,spi-gpio))
+
+define KernelPackage/spi-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=User mode SPI device driver
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_SPI_SPIDEV \
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
+ FILES:=$(LINUX_DIR)/drivers/spi/spidev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spidev)
+endef
+
+define KernelPackage/spi-dev/description
+ This package contains the user mode SPI device driver
+endef
+
+$(eval $(call KernelPackage,spi-dev))
+
+define KernelPackage/crypto-dev-ixp4xx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=IXP4xx crypto driver
+ DEPENDS:=\
+ @TARGET_ixp4xx +kmod-crypto-core +kmod-crypto-des +kmod-crypto-aead \
+ +kmod-crypto-authenc
+ KCONFIG:=\
+ CONFIG_CRYPTO_HW=y \
+ CONFIG_CRYPTO_DEV_IXP4XX
+ FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,ixp4xx_crypto)
+endef
+
+define KernelPackage/crypto-dev-ixp4xx/description
+ Kernel support for the IXP4xx HW crypto engine.
+endef
+
+$(eval $(call KernelPackage,crypto-dev-ixp4xx))
projects / openwrt.git / blobdiff