-Index: linux-2.6.28.2/drivers/ssb/Makefile
-===================================================================
---- linux-2.6.28.2.orig/drivers/ssb/Makefile 2009-02-01 13:09:04.000000000 +0100
-+++ linux-2.6.28.2/drivers/ssb/Makefile 2009-02-01 13:09:31.000000000 +0100
+Sent to mainline on 2009 Feb 03.
+
+For further modifications, please use separate patch files. This simpifies
+keeping track of what is upstream and what is not. Thanks.
+
+--mb
+
+
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.
# built-in drivers
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
-Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-01 19:51:46.000000000 +0100
-@@ -0,0 +1,259 @@
+--- /dev/null
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -0,0 +1,508 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon Power Management Unit driver
+ u32 crystalfreq)
+{
+ struct ssb_bus *bus = cc->dev->bus;
-+ const struct pmu0_plltab_entry *e;
++ const struct pmu0_plltab_entry *e = NULL;
+ u32 pmuctl, tmp, pllctl;
+ unsigned int i;
+
+ /* The 5354 crystal freq is 25MHz */
+ crystalfreq = 25000;
+ }
-+ e = pmu0_plltab_find_entry(crystalfreq);
++ if (crystalfreq)
++ e = pmu0_plltab_find_entry(crystalfreq);
+ if (!e)
+ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
+ BUG_ON(!e);
+ return;
+ }
+
-+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%u MHz\n",
++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+ (crystalfreq / 1000), (crystalfreq % 1000));
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+ case 0x4328:
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU));
++ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU));
++ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+ break;
+ case 0x5354:
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU));
++ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU));
++ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+ break;
+ default:
+ SSB_WARN_ON(1);
+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
++struct pmu1_plltab_entry {
++ u16 freq; /* Crystal frequency in kHz.*/
++ u8 xf; /* Crystal frequency value for PMU control */
++ u8 ndiv_int;
++ u32 ndiv_frac;
++ u8 p1div;
++ u8 p2div;
++};
++
++static const struct pmu1_plltab_entry pmu1_plltab[] = {
++ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, },
++ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, },
++ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, },
++ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, },
++ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, },
++ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, },
++ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, },
++ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, },
++ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, },
++ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, },
++ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, },
++ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
++ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, },
++ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, },
++ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, },
++};
++
++#define SSB_PMU1_DEFAULT_XTALFREQ 15360
++
++static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
++{
++ const struct pmu1_plltab_entry *e;
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
++ e = &pmu1_plltab[i];
++ if (e->freq == crystalfreq)
++ return e;
++ }
++
++ return NULL;
++}
++
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
+ u32 crystalfreq)
+{
-+ WARN_ON(1);
-+ //TODO
++ struct ssb_bus *bus = cc->dev->bus;
++ const struct pmu1_plltab_entry *e = NULL;
++ u32 buffer_strength = 0;
++ u32 tmp, pllctl, pmuctl;
++ unsigned int i;
++
++ if (bus->chip_id == 0x4312) {
++ /* We do not touch the BCM4312 PLL and assume
++ * the default crystal settings work out-of-the-box. */
++ cc->pmu.crystalfreq = 20000;
++ return;
++ }
++
++ if (crystalfreq)
++ e = pmu1_plltab_find_entry(crystalfreq);
++ if (!e)
++ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
++ BUG_ON(!e);
++ crystalfreq = e->freq;
++ cc->pmu.crystalfreq = e->freq;
++
++ /* Check if the PLL already is programmed to this frequency. */
++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
++ /* We're already there... */
++ return;
++ }
++
++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
++ (crystalfreq / 1000), (crystalfreq % 1000));
++
++ /* First turn the PLL off. */
++ switch (bus->chip_id) {
++ case 0x4325:
++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
++ (1 << SSB_PMURES_4325_HT_AVAIL)));
++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
++ (1 << SSB_PMURES_4325_HT_AVAIL)));
++ /* Adjust the BBPLL to 2 on all channels later. */
++ buffer_strength = 0x222222;
++ break;
++ default:
++ SSB_WARN_ON(1);
++ }
++ for (i = 1500; i; i--) {
++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
++ break;
++ udelay(10);
++ }
++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++
++ /* Set p1div and p2div. */
++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
++ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
++ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
++ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
++
++ /* Set ndiv int and ndiv mode */
++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
++ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
++ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
++ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
++
++ /* Set ndiv frac */
++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
++ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
++ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
++
++ /* Change the drive strength, if required. */
++ if (buffer_strength) {
++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
++ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
++ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
++ }
++
++ /* Tune the crystalfreq and the divisor. */
++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
++ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
++ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
++ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
++ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
++ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
+ }
+}
+
++struct pmu_res_updown_tab_entry {
++ u8 resource; /* The resource number */
++ u16 updown; /* The updown value */
++};
++
++enum pmu_res_depend_tab_task {
++ PMU_RES_DEP_SET = 1,
++ PMU_RES_DEP_ADD,
++ PMU_RES_DEP_REMOVE,
++};
++
++struct pmu_res_depend_tab_entry {
++ u8 resource; /* The resource number */
++ u8 task; /* SET | ADD | REMOVE */
++ u32 depend; /* The depend mask */
++};
++
++static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
++ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, },
++ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, },
++ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, },
++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, },
++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, },
++ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, },
++ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, },
++ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, },
++ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, },
++ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, },
++ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, },
++ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, },
++};
++
++static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
++ {
++ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
++ .resource = SSB_PMURES_4328_ILP_REQUEST,
++ .task = PMU_RES_DEP_SET,
++ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
++ },
++};
++
++static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
++ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, },
++};
++
++static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
++ {
++ /* Adjust HT-Available dependencies. */
++ .resource = SSB_PMURES_4325_HT_AVAIL,
++ .task = PMU_RES_DEP_ADD,
++ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
++ (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
++ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
++ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
++ },
++};
++
+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 min_msk = 0, max_msk = 0;
++ unsigned int i;
++ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
++ unsigned int updown_tab_size;
++ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
++ unsigned int depend_tab_size;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ /* We keep the default settings:
+ * min_msk = 0xCBB
+ * max_msk = 0x7FFFF
-+ * updown table size = 0
-+ * depend table size = 0
+ */
+ break;
+ case 0x4325:
-+ //TODO
++ /* Power OTP down later. */
++ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
++ (1 << SSB_PMURES_4325_LNLDO2_PU);
++ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
++ SSB_CHIPCO_CHST_4325_PMUTOP_2B)
++ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
++ /* The PLL may turn on, if it decides so. */
++ max_msk = 0xFFFFF;
++ updown_tab = pmu_res_updown_tab_4325a0;
++ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
++ depend_tab = pmu_res_depend_tab_4325a0;
++ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
+ break;
+ case 0x4328:
-+ //TODO
++ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
++ (1 << SSB_PMURES_4328_XTAL_EN);
++ /* The PLL may turn on, if it decides so. */
++ max_msk = 0xFFFFF;
++ updown_tab = pmu_res_updown_tab_4328a0;
++ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
++ depend_tab = pmu_res_depend_tab_4328a0;
++ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
+ break;
+ case 0x5354:
+ /* The PLL may turn on, if it decides so. */
+ "ERROR: PMU resource config unknown for device %04X\n",
+ bus->chip_id);
+ }
-+ //TODO table upload
++
++ if (updown_tab) {
++ for (i = 0; i < updown_tab_size; i++) {
++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
++ updown_tab[i].resource);
++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
++ updown_tab[i].updown);
++ }
++ }
++ if (depend_tab) {
++ for (i = 0; i < depend_tab_size; i++) {
++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
++ depend_tab[i].resource);
++ switch (depend_tab[i].task) {
++ case PMU_RES_DEP_SET:
++ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
++ depend_tab[i].depend);
++ break;
++ case PMU_RES_DEP_ADD:
++ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
++ depend_tab[i].depend);
++ break;
++ case PMU_RES_DEP_REMOVE:
++ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
++ ~(depend_tab[i].depend));
++ break;
++ default:
++ SSB_WARN_ON(1);
++ }
++ }
++ }
+
+ /* Set the resource masks. */
+ if (min_msk)
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 pmucap;
+
-+if (bus->chip_id != 0x5354) return; //FIXME currently only 5354 code implemented.
-+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+ return;
+
+ ssb_pmu_pll_init(cc);
+ ssb_pmu_resources_init(cc);
+}
-Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.28.2.orig/drivers/ssb/driver_chipcommon.c 2009-02-01 13:07:03.000000000 +0100
-+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon.c 2009-02-01 13:47:17.000000000 +0100
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
@@ -26,19 +26,6 @@ enum ssb_clksrc {
};
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
calc_fast_powerup_delay(cc);
-Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.28.2.orig/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 13:22:59.000000000 +0100
-+++ linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 19:17:25.000000000 +0100
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -181,6 +181,16 @@
#define SSB_CHIPCO_PROG_WAITCNT 0x0124
#define SSB_CHIPCO_FLASH_CFG 0x0128
#define SSB_CHIPCO_UART0_DATA 0x0300
#define SSB_CHIPCO_UART0_IMR 0x0304
#define SSB_CHIPCO_UART0_FCR 0x0308
-@@ -197,6 +207,156 @@
+@@ -197,6 +207,196 @@
#define SSB_CHIPCO_UART1_LSR 0x0414
#define SSB_CHIPCO_UART1_MSR 0x0418
#define SSB_CHIPCO_UART1_SCRATCH 0x041C
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0 0
++#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */
++#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20
++#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */
++#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24
+#define SSB_PMU1_PLLCTL1 1
++#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */
++#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0
++#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */
++#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8
++#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */
++#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16
++#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */
++#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24
+#define SSB_PMU1_PLLCTL2 2
++#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */
++#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0
++#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */
++#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8
++#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */
++#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17
++#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */
++#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20
+#define SSB_PMU1_PLLCTL3 3
++#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */
++#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0
+#define SSB_PMU1_PLLCTL4 4
+#define SSB_PMU1_PLLCTL5 5
++#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */
++#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8
+
+/* BCM4312 PLL resource numbers. */
-+#define SSB_PLLRES_4312_SWITCHER_BURST 0
-+#define SSB_PLLRES_4312_SWITCHER_PWM 1
-+#define SSB_PLLRES_4312_PA_REF_LDO 2
-+#define SSB_PLLRES_4312_CORE_LDO_BURST 3
-+#define SSB_PLLRES_4312_CORE_LDO_PWM 4
-+#define SSB_PLLRES_4312_RADIO_LDO 5
-+#define SSB_PLLRES_4312_ILP_REQUEST 6
-+#define SSB_PLLRES_4312_BG_FILTBYP 7
-+#define SSB_PLLRES_4312_TX_FILTBYP 8
-+#define SSB_PLLRES_4312_RX_FILTBYP 9
-+#define SSB_PLLRES_4312_XTAL_PU 10
-+#define SSB_PLLRES_4312_ALP_AVAIL 11
-+#define SSB_PLLRES_4312_BB_PLL_FILTBYP 12
-+#define SSB_PLLRES_4312_RF_PLL_FILTBYP 13
-+#define SSB_PLLRES_4312_HT_AVAIL 14
++#define SSB_PMURES_4312_SWITCHER_BURST 0
++#define SSB_PMURES_4312_SWITCHER_PWM 1
++#define SSB_PMURES_4312_PA_REF_LDO 2
++#define SSB_PMURES_4312_CORE_LDO_BURST 3
++#define SSB_PMURES_4312_CORE_LDO_PWM 4
++#define SSB_PMURES_4312_RADIO_LDO 5
++#define SSB_PMURES_4312_ILP_REQUEST 6
++#define SSB_PMURES_4312_BG_FILTBYP 7
++#define SSB_PMURES_4312_TX_FILTBYP 8
++#define SSB_PMURES_4312_RX_FILTBYP 9
++#define SSB_PMURES_4312_XTAL_PU 10
++#define SSB_PMURES_4312_ALP_AVAIL 11
++#define SSB_PMURES_4312_BB_PLL_FILTBYP 12
++#define SSB_PMURES_4312_RF_PLL_FILTBYP 13
++#define SSB_PMURES_4312_HT_AVAIL 14
+
+/* BCM4325 PLL resource numbers. */
-+#define SSB_PLLRES_4325_BUCK_BOOST_BURST 0
-+#define SSB_PLLRES_4325_CBUCK_BURST 1
-+#define SSB_PLLRES_4325_CBUCK_PWM 2
-+#define SSB_PLLRES_4325_CLDO_CBUCK_BURST 3
-+#define SSB_PLLRES_4325_CLDO_CBUCK_PWM 4
-+#define SSB_PLLRES_4325_BUCK_BOOST_PWM 5
-+#define SSB_PLLRES_4325_ILP_REQUEST 6
-+#define SSB_PLLRES_4325_ABUCK_BURST 7
-+#define SSB_PLLRES_4325_ABUCK_PWM 8
-+#define SSB_PLLRES_4325_LNLDO1_PU 9
-+#define SSB_PLLRES_4325_LNLDO2_PU 10
-+#define SSB_PLLRES_4325_LNLDO3_PU 11
-+#define SSB_PLLRES_4325_LNLDO4_PU 12
-+#define SSB_PLLRES_4325_XTAL_PU 13
-+#define SSB_PLLRES_4325_ALP_AVAIL 14
-+#define SSB_PLLRES_4325_RX_PWRSW_PU 15
-+#define SSB_PLLRES_4325_TX_PWRSW_PU 16
-+#define SSB_PLLRES_4325_RFPLL_PWRSW_PU 17
-+#define SSB_PLLRES_4325_LOGEN_PWRSW_PU 18
-+#define SSB_PLLRES_4325_AFE_PWRSW_PU 19
-+#define SSB_PLLRES_4325_BBPLL_PWRSW_PU 20
-+#define SSB_PLLRES_4325_HT_AVAIL 21
++#define SSB_PMURES_4325_BUCK_BOOST_BURST 0
++#define SSB_PMURES_4325_CBUCK_BURST 1
++#define SSB_PMURES_4325_CBUCK_PWM 2
++#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3
++#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4
++#define SSB_PMURES_4325_BUCK_BOOST_PWM 5
++#define SSB_PMURES_4325_ILP_REQUEST 6
++#define SSB_PMURES_4325_ABUCK_BURST 7
++#define SSB_PMURES_4325_ABUCK_PWM 8
++#define SSB_PMURES_4325_LNLDO1_PU 9
++#define SSB_PMURES_4325_LNLDO2_PU 10
++#define SSB_PMURES_4325_LNLDO3_PU 11
++#define SSB_PMURES_4325_LNLDO4_PU 12
++#define SSB_PMURES_4325_XTAL_PU 13
++#define SSB_PMURES_4325_ALP_AVAIL 14
++#define SSB_PMURES_4325_RX_PWRSW_PU 15
++#define SSB_PMURES_4325_TX_PWRSW_PU 16
++#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17
++#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18
++#define SSB_PMURES_4325_AFE_PWRSW_PU 19
++#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20
++#define SSB_PMURES_4325_HT_AVAIL 21
+
+/* BCM4328 PLL resource numbers. */
-+#define SSB_PLLRES_4328_EXT_SWITCHER_PWM 0
-+#define SSB_PLLRES_4328_BB_SWITCHER_PWM 1
-+#define SSB_PLLRES_4328_BB_SWITCHER_BURST 2
-+#define SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST 3
-+#define SSB_PLLRES_4328_ILP_REQUEST 4
-+#define SSB_PLLRES_4328_RADIO_SWITCHER_PWM 5
-+#define SSB_PLLRES_4328_RADIO_SWITCHER_BURST 6
-+#define SSB_PLLRES_4328_ROM_SWITCH 7
-+#define SSB_PLLRES_4328_PA_REF_LDO 8
-+#define SSB_PLLRES_4328_RADIO_LDO 9
-+#define SSB_PLLRES_4328_AFE_LDO 10
-+#define SSB_PLLRES_4328_PLL_LDO 11
-+#define SSB_PLLRES_4328_BG_FILTBYP 12
-+#define SSB_PLLRES_4328_TX_FILTBYP 13
-+#define SSB_PLLRES_4328_RX_FILTBYP 14
-+#define SSB_PLLRES_4328_XTAL_PU 15
-+#define SSB_PLLRES_4328_XTAL_EN 16
-+#define SSB_PLLRES_4328_BB_PLL_FILTBYP 17
-+#define SSB_PLLRES_4328_RF_PLL_FILTBYP 18
-+#define SSB_PLLRES_4328_BB_PLL_PU 19
++#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0
++#define SSB_PMURES_4328_BB_SWITCHER_PWM 1
++#define SSB_PMURES_4328_BB_SWITCHER_BURST 2
++#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3
++#define SSB_PMURES_4328_ILP_REQUEST 4
++#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5
++#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6
++#define SSB_PMURES_4328_ROM_SWITCH 7
++#define SSB_PMURES_4328_PA_REF_LDO 8
++#define SSB_PMURES_4328_RADIO_LDO 9
++#define SSB_PMURES_4328_AFE_LDO 10
++#define SSB_PMURES_4328_PLL_LDO 11
++#define SSB_PMURES_4328_BG_FILTBYP 12
++#define SSB_PMURES_4328_TX_FILTBYP 13
++#define SSB_PMURES_4328_RX_FILTBYP 14
++#define SSB_PMURES_4328_XTAL_PU 15
++#define SSB_PMURES_4328_XTAL_EN 16
++#define SSB_PMURES_4328_BB_PLL_FILTBYP 17
++#define SSB_PMURES_4328_RF_PLL_FILTBYP 18
++#define SSB_PMURES_4328_BB_PLL_PU 19
+
+/* BCM5354 PLL resource numbers. */
-+#define SSB_PLLRES_5354_EXT_SWITCHER_PWM 0
-+#define SSB_PLLRES_5354_BB_SWITCHER_PWM 1
-+#define SSB_PLLRES_5354_BB_SWITCHER_BURST 2
-+#define SSB_PLLRES_5354_BB_EXT_SWITCHER_BURST 3
-+#define SSB_PLLRES_5354_ILP_REQUEST 4
-+#define SSB_PLLRES_5354_RADIO_SWITCHER_PWM 5
-+#define SSB_PLLRES_5354_RADIO_SWITCHER_BURST 6
-+#define SSB_PLLRES_5354_ROM_SWITCH 7
-+#define SSB_PLLRES_5354_PA_REF_LDO 8
-+#define SSB_PLLRES_5354_RADIO_LDO 9
-+#define SSB_PLLRES_5354_AFE_LDO 10
-+#define SSB_PLLRES_5354_PLL_LDO 11
-+#define SSB_PLLRES_5354_BG_FILTBYP 12
-+#define SSB_PLLRES_5354_TX_FILTBYP 13
-+#define SSB_PLLRES_5354_RX_FILTBYP 14
-+#define SSB_PLLRES_5354_XTAL_PU 15
-+#define SSB_PLLRES_5354_XTAL_EN 16
-+#define SSB_PLLRES_5354_BB_PLL_FILTBYP 17
-+#define SSB_PLLRES_5354_RF_PLL_FILTBYP 18
-+#define SSB_PLLRES_5354_BB_PLL_PU 19
++#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0
++#define SSB_PMURES_5354_BB_SWITCHER_PWM 1
++#define SSB_PMURES_5354_BB_SWITCHER_BURST 2
++#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3
++#define SSB_PMURES_5354_ILP_REQUEST 4
++#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5
++#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6
++#define SSB_PMURES_5354_ROM_SWITCH 7
++#define SSB_PMURES_5354_PA_REF_LDO 8
++#define SSB_PMURES_5354_RADIO_LDO 9
++#define SSB_PMURES_5354_AFE_LDO 10
++#define SSB_PMURES_5354_PLL_LDO 11
++#define SSB_PMURES_5354_BG_FILTBYP 12
++#define SSB_PMURES_5354_TX_FILTBYP 13
++#define SSB_PMURES_5354_RX_FILTBYP 14
++#define SSB_PMURES_5354_XTAL_PU 15
++#define SSB_PMURES_5354_XTAL_EN 16
++#define SSB_PMURES_5354_BB_PLL_FILTBYP 17
++#define SSB_PMURES_5354_RF_PLL_FILTBYP 18
++#define SSB_PMURES_5354_BB_PLL_PU 19
++
++
++
++/** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
++#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
++#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
++#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
++#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
++#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004
++#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2
++#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008
++#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3
++#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0
++#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
++#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
-@@ -353,11 +513,20 @@
+@@ -353,11 +553,20 @@
struct ssb_device;
struct ssb_serial_port;
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -365,6 +534,17 @@ static inline bool ssb_chipco_available(
+@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
return (cc->dev != NULL);
}
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
-@@ -406,4 +586,8 @@ extern int ssb_chipco_serial_init(struct
+@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct
struct ssb_serial_port *ports);
#endif /* CONFIG_SSB_SERIAL */
projects / openwrt.git / blobdiff