bool "Enable IPv6 support"
default y
help
- Enable IPv6 support to busybox. This makes applets that talk IP
- able to work with IPv6.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
config BUSYBOX_CONFIG_ARPING
bool "arping"
help
Ping hosts by ARP packets
+config BUSYBOX_CONFIG_DNSD
+ bool "dnsd"
+ default n
+ help
+ Small and static DNS server daemon.
+
+config BUSYBOX_CONFIG_ETHER_WAKE
+ bool "ether-wake"
+ default n
+ help
+ Send a magic packet to wake up sleeping machines.
+
+config BUSYBOX_CONFIG_FAKEIDENTD
+ bool "fakeidentd"
+ default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
+ help
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
+
config BUSYBOX_CONFIG_FTPGET
bool "ftpget"
default n
help
Store a remote file via FTP.
+config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
+ bool "Enable long options in ftpget/ftpput"
+ default n
+ depends on BUSYBOX_CONFIG_GETOPT_LONG && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
+ help
+ Support long options for the ftpget/ftpput applet.
+
config BUSYBOX_CONFIG_HOSTNAME
bool "hostname"
default n
help
Serve web pages via an HTTP server.
-config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
- bool " Support using httpd only from inetd"
+config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+ bool "Support reloading the global config file using hup signal"
default n
- depends on BUSYBOX_CONFIG_HTTPD
+ depends on BUSYBOX_CONFIG_HTTPD && BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+ help
+ This option enables processing of SIGHUP to reload cached
+ configuration settings.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
+ bool "Enable support -u <user> option"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD && BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD
help
- This option disables uid and port options for the httpd applet
- but requires inetd server daemon.
+ This option allows the server to run as a specific user
+ rather than defaulting to the user that starts the server.
+ Use of this option requires special privileges to change to a
+ different user.
config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool " Enable Basic http Authentication"
+ bool "Enable Basic http Authentication"
default y
depends on BUSYBOX_CONFIG_HTTPD
help
authentication on a per url basis.
config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
- bool " Support MD5 crypted passwords for http Authentication"
+ bool "Support MD5 crypted passwords for http Authentication"
default y
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
help
- Enables basic per url authentication from /etc/httpd.conf
+ Enables basic per URL authentication from /etc/httpd.conf
using md5 passwords.
-
-if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
- bool " Support reloading the global config file using hup signal"
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option enables processing of SIGHUP to reload cached
- configuration settings.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
- bool " Enable support -u <user> option"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows the server to run as a specific user
- rather than defaulting to the user that starts the server.
- Use of this option requires special privileges to change to a
- different user.
-endif
-
config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
- bool " Support loading additional MIME types at run-time"
+ bool "Support loading additional MIME types at run-time"
default y
depends on BUSYBOX_CONFIG_HTTPD
help
run-time to be specified in the configuration file.
config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- bool " Support Common Gateway Interface (CGI)"
+ bool "Support Common Gateway Interface (CGI)"
default y
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows scripts and executables to be invoked
- when specific urls are requested.
+ when specific URLs are requested.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+ bool "Enable support for running scripts through an interpreter"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+ help
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an addition line in your httpd
+ config file:
+ *.php:/path/to/your/php
config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
- bool " Support the REMOTE_PORT environment variable for CGI"
+ bool "Support the REMOTE_PORT environment variable for CGI"
default y
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
references that contain a unique port number.
config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
- bool " Enable the -e option for shell script CGI simplification."
+ bool "Enable the -e option for shell script CGI simplification."
default y
depends on BUSYBOX_CONFIG_HTTPD
help
- After set, this option allows html encoding arbitrary
+ This option allows html encoding arbitrary
strings for display of the browser. Output goes to stdout.
For example, httpd -e "<Hello World>" as
"<Hello World>".
Ifconfig is used to configure the kernel-resident network interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
- bool " Enable status reporting output (+7k)"
+ bool "Enable status reporting output (+7k)"
default y
depends on BUSYBOX_CONFIG_IFCONFIG
help
of the currently active interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
- bool " Enable slip-specific options \"keepalive\" and \"outfill\""
+ bool "Enable slip-specific options \"keepalive\" and \"outfill\""
default n
depends on BUSYBOX_CONFIG_IFCONFIG
help
planning on using serial lines, leave this unchecked.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
+ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
default n
depends on BUSYBOX_CONFIG_IFCONFIG
help
and/or the interrupt line used by the specified device.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
- bool " Enable option \"hw\" (ether only)"
+ bool "Enable option \"hw\" (ether only)"
default y
depends on BUSYBOX_CONFIG_IFCONFIG
help
class.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool " Set the broadcast automatically"
+ bool "Set the broadcast automatically"
default y
depends on BUSYBOX_CONFIG_IFCONFIG
help
config BUSYBOX_CONFIG_IFUPDOWN
bool "ifupdown"
default n
+ select BUSYBOX_CONFIG_RUN_PARTS
help
Activate or deactivate the specified interfaces. This applet makes
use of either "ifconfig" and "route" or the "ip" command to actually
configure network interfaces. Therefore, you will probably also want
- to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable
- BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options. Of
+ to enable either IFCONFIG and ROUTE, or enable
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
course you could use non-busybox versions of these programs, so
against my better judgement (since this will surely result in plenty
of support questions on the mailing list), I do not force you to
standalone utilities.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- bool " Use ip applet"
+ bool "Use ip applet"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
than the default of using the older 'ifconfig' and 'route' utilities.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ip applet"
+ bool "Use busybox ip applet"
default n
depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
select BUSYBOX_CONFIG_IP
help
Use the busybox iproute "ip" applet to implement "ifupdown".
- If leave this disabled, you must install the full-blown iproute2
+ If left disabled, you must install the full-blown iproute2
utility or the "ifup" and "ifdown" applets will not work.
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ifconfig and route applets"
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+ bool "Use busybox ifconfig and route applets"
default n
- depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
+ depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
select BUSYBOX_CONFIG_IFCONFIG
select BUSYBOX_CONFIG_ROUTE
help
Use the busybox iproute "ifconfig" and "route" applets to
implement the "ifup" and "ifdown" utilities.
- If leave this disabled, you must install the full-blown ifconfig
+ If left disabled, you must install the full-blown ifconfig
and route utilities, or the "ifup" and "ifdown" applets will not
work.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
- bool " Enable support for IPv4"
+ bool "Enable support for IPv4"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
If you want busybox to talk IPv4, leave this on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
- bool " Enable support for IPv6"
+ bool "Enable support for IPv6"
default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
+ depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
help
If you need support for IPv6, turn this option on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
- bool " Enable support for IPX"
+ bool "Enable support for IPX"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
networks.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool " Enable mapping support"
+ bool "Enable mapping support"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
config BUSYBOX_CONFIG_INETD
bool "inetd"
default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Internet superserver daemon
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO
- bool " Support echo service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+ bool "Support echo service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Echo received data internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD
- bool " Support discard service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+ bool "Support discard service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Internet /dev/null internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME
- bool " Support time service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+ bool "Support time service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Return 32 bit time since 1900 internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME
- bool " Support daytime service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+ bool "Support daytime service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Return human-readable time internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN
- bool " Support chargen service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+ bool "Support chargen service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Familiar character generator internal inetd service
+config BUSYBOX_CONFIG_FEATURE_INETD_RPC
+ bool "Support RPC services"
+ default n
+ depends on BUSYBOX_CONFIG_INETD
+ depends on BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+ help
+ Support Sun-RPC based services
config BUSYBOX_CONFIG_IP
bool "ip"
utility. You generally don't need "ip" to use busybox with
TCP/IP.
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR
- config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- default n
- comment " address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR)
- config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- bool " address"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Address manipulation support for the "ip" applet.
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK
- config BUSYBOX_CONFIG_FEATURE_IP_LINK
- default n
- comment " link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK)
- config BUSYBOX_CONFIG_FEATURE_IP_LINK
- bool " link"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Configure network devices with "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE
- config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- default n
- comment " route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE)
- config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- bool " route"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for routing table management to "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL
- config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- default n
- comment " tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL)
- config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- bool " tunnel"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for tunneling commands to "ip".
-endif
+config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+ bool "ip address"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Address manipulation support for the "ip" applet.
-config BUSYBOX_CONFIG_IPCALC
- bool "ipcalc"
- default y
+config BUSYBOX_CONFIG_FEATURE_IP_LINK
+ bool "ip link"
+ default n
+ depends on BUSYBOX_CONFIG_IP
help
- ipcalc takes an IP address and netmask and calculates the
- resulting broadcast, network, and host range.
+ Configure network devices with "ip".
-config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
- bool " Fancy IPCALC, more options, adds 1 kbyte"
- default y
- depends on BUSYBOX_CONFIG_IPCALC
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+ bool "ip route"
+ default n
+ depends on BUSYBOX_CONFIG_IP
help
- Adds the options hostname, prefix and silent to the output of "ipcalc".
+ Add support for routing table management to "ip".
-config BUSYBOX_CONFIG_IPADDR
- bool "ipaddr"
+config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+ bool "ip tunnel"
default n
+ depends on BUSYBOX_CONFIG_IP
help
- Equivalent to selecting address support to "ip", above.
+ Add support for tunneling commands to "ip".
-config BUSYBOX_CONFIG_IPLINK
- bool "iplink"
+config BUSYBOX_CONFIG_FEATURE_IP_RULE
+ bool "ip rule"
default n
+ depends on BUSYBOX_CONFIG_IP
help
- Equivalent to selecting link support to "ip", above.
+ Add support for rule commands to "ip".
-config BUSYBOX_CONFIG_IPROUTE
- bool "iproute"
+config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
+ bool "Support short forms of ip commands."
default n
+ depends on BUSYBOX_CONFIG_IP
help
- Equivalent to selecting route support to "ip", above.
+ Also support short-form of ip <OBJECT> commands:
+ ip addr -> ipaddr
+ ip link -> iplink
+ ip route -> iproute
+ ip tunnel -> iptunnel
+
+ Say N unless you desparately need the short form of the ip
+ object commands.
+
+config BUSYBOX_CONFIG_IPADDR
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+
+config BUSYBOX_CONFIG_IPLINK
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
+
+config BUSYBOX_CONFIG_IPROUTE
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
config BUSYBOX_CONFIG_IPTUNNEL
- bool "iptunnel"
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+
+config BUSYBOX_CONFIG_IPRULE
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
+
+config BUSYBOX_CONFIG_IPCALC
+ bool "ipcalc"
+ default n
+ help
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
+ bool "Fancy IPCALC, more options, adds 1 kbyte"
+ default n
+ depends on BUSYBOX_CONFIG_IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of "ipcalc".
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
+ bool "Enable long options"
default n
+ depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_GETOPT_LONG
help
- Equivalent to selecting tunnel support to "ip", above.
+ Support long options for the ipcalc applet.
config BUSYBOX_CONFIG_NAMEIF
bool "nameif"
default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
nameif is used to rename network interface by its MAC address.
Renamed interfaces MUST be in the down state.
File fields are separated by space or tab.
File format:
# Comment
- new_interface_name XX:XX:XX:XX:XX:XX
+ new_interface_name XX:XX:XX:XX:XX:XX
config BUSYBOX_CONFIG_NC
bool "nc"
help
A simple Unix utility which reads and writes data across network
connections.
+
+config BUSYBOX_CONFIG_NETMSG
+ bool "netmsg"
+ default y
+ help
+ simple program for sending udp broadcast messages
+
+config BUSYBOX_CONFIG_NC_SERVER
+ bool "Netcat server options (-lp)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ Allow netcat to act as a server.
+
+config BUSYBOX_CONFIG_NC_EXTRA
+ bool "Netcat extensions (-eiw and filename)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
config BUSYBOX_CONFIG_NETSTAT
bool "netstat"
elicit an ICMP ECHO_RESPONSE from a host or gateway.
config BUSYBOX_CONFIG_FEATURE_FANCY_PING
- bool " Enable fancy ping output"
+ bool "Enable fancy ping output"
default y
depends on BUSYBOX_CONFIG_PING
help
This will give you a ping that can talk IPv6.
config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
- bool " Enable fancy ping6 output"
+ bool "Enable fancy ping6 output"
default y
depends on BUSYBOX_CONFIG_PING6
help
used to test other simple protocols.
config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
- bool " Pass TERM type to remote host"
+ bool "Pass TERM type to remote host"
default y
depends on BUSYBOX_CONFIG_TELNET
help
things like ANSI colors and other control sequences behave.
config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
- bool " Pass USER type to remote host"
+ bool "Pass USER type to remote host"
default n
depends on BUSYBOX_CONFIG_TELNET
help
config BUSYBOX_CONFIG_TELNETD
bool "telnetd"
default y
- #select BUSYBOX_CONFIG_LOGIN
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
A daemon for the TELNET protocol, allowing you to log onto the host
running the daemon. Please keep in mind that the TELNET protocol
Note that for busybox telnetd to work you need several things:
First of all, your kernel needs:
- BUSYBOX_CONFIG_UNIX98_PTYS=y
- BUSYBOX_CONFIG_DEVPTS_FS=y
+ UNIX98_PTYS=y
+ DEVPTS_FS=y
Next, you need a /dev/pts directory on your root filesystem:
mount -t devpts devpts /dev/pts
- You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and
- BUSYBOX_CONFIG_FEATURE_SUID enabled. And finally, you should make
+ You need to be sure that Busybox has LOGIN and
+ FEATURE_SUID enabled. And finally, you should make
certain that Busybox has been installed setuid root:
chown root.root /bin/busybox
with all that done, telnetd _should_ work....
-config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD
- bool " Support call from inetd only"
+config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+ bool "Support standalone telnetd (not inetd only)"
default n
depends on BUSYBOX_CONFIG_TELNETD
help
- Selecting this will make telnetd only callable from inetd,
- removing the standalone support.
+ Selecting this will make telnetd able to run standalone.
config BUSYBOX_CONFIG_TFTP
bool "tftp"
for a network-enabled bootloader.
config BUSYBOX_CONFIG_FEATURE_TFTP_GET
- bool " Enable \"get\" command"
+ bool "Enable \"get\" command"
default n
depends on BUSYBOX_CONFIG_TFTP
help
a client to retrieve a file from a TFTP server.
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
- bool " Enable \"put\" command"
+ bool "Enable \"put\" command"
default n
depends on BUSYBOX_CONFIG_TFTP
help
a client to transfer a file to a TFTP server.
config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool " Enable \"blocksize\" command"
+ bool "Enable \"blocksize\" command"
default n
depends on BUSYBOX_CONFIG_TFTP
help
Allow the client to specify the desired block size for transfers.
-config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG
- bool " Enable debug"
+config BUSYBOX_CONFIG_DEBUG_TFTP
+ bool "Enable debug"
default n
depends on BUSYBOX_CONFIG_TFTP
help
Utility to trace the route of IP packets
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool " Enable verbose output"
+ bool "Enable verbose output"
default y
depends on BUSYBOX_CONFIG_TRACEROUTE
help
Add some verbosity to traceroute. This includes amongst other things
hostnames and ICMP response types.
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
+ bool "Enable loose source route"
+ default n
+ depends on BUSYBOX_CONFIG_TRACEROUTE
+ help
+ Add option to specify a loose source route gateway
+ (8 maximum).
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
+ bool "Use ICMP instead of UDP"
+ default n
+ depends on BUSYBOX_CONFIG_TRACEROUTE
+ help
+ Add feature to allow for ICMP ECHO instead of UDP datagrams.
+
+source package/busybox/config/networking/udhcp/Config.in
+
config BUSYBOX_CONFIG_VCONFIG
bool "vconfig"
default y
HTTPS, and FTP servers.
config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
- bool " Enable a nifty process meter (+2k)"
+ bool "Enable a nifty process meter (+2k)"
default y
depends on BUSYBOX_CONFIG_WGET
help
Enable the transfer progress bar for wget transfers.
config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
- bool " Enable HTTP authentication"
+ bool "Enable HTTP authentication"
default y
depends on BUSYBOX_CONFIG_WGET
help
Support authenticated HTTP transfers.
config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
- bool " Enable IPv6 literal addresses"
+ bool "Enable IPv6 literal addresses"
default y
- depends on BUSYBOX_CONFIG_WGET
+ depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_FEATURE_IPV6
help
Support IPv6 address literal notation in URLs.
-source package/busybox/config/networking/udhcp/Config.in
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+ bool "Enable long options"
+ default y
+ depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_GETOPT_LONG
+ help
+ Support long options for the wget applet.
-endmenu
+config BUSYBOX_CONFIG_ZCIP
+ bool "zcip"
+ default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
+ help
+ ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+ It's a daemon that allocates and defends a dynamically assigned
+ address on the 169.254/16 network, requiring no system administrator.
+
+ See http://www.zeroconf.org for further details, and "zcip.script"
+ in the busybox examples.
+endmenu
projects / openwrt.git / blobdiff