add a load of fixes from whiterussian to head

[openwrt.git] / target / linux / linux-2.4 / Makefile

diff --git a/target/linux/linux-2.4/Makefile b/target/linux/linux-2.4/Makefile
index e8ce928..bd25da7 100644 (file)
--- a/target/linux/linux-2.4/Makefile
+++ b/target/linux/linux-2.4/Makefile
@@ -24,17 +24,14 @@ LINUX_KCONFIG:=./config/$(BOARD)
 LINUX_BUILD_DIR:=$(BUILD_DIR)/linux-2.4-$(BOARD)
 LINUX_TARGET_DIR:=$(LINUX_BUILD_DIR)/root
 LINUX_KERNEL:=$(LINUX_BUILD_DIR)/vmlinux
-LINUX_IMAGE:=$(LINUX_BUILD_DIR)/kernel-image
-LINUX_FORMAT=zImage
 LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
        -e 's/mipsel/mips/' \
        -e 's/powerpc/ppc/' \
        -e 's/sh[234]/sh/' \
        )
 
-LINUX_BINARY_DRIVER_SITE := http://openwrt.org/downloads/
+LINUX_BINARY_DRIVER_SITE := http://openwrt.org/downloads/sources/
 LINUX_SOURCE := linux-$(LINUX_VERSION).tar.bz2
-LINUX_BINLOC := arch/$(LINUX_KARCH)/bcm947xx/compressed/piggy
 LINUX_SOURCE_DIR := $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)
 MODULES_DIR := $(LINUX_BUILD_DIR)/modules/$(MODULES_SUBDIR)
 TARGET_MODULES_DIR := $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
@@ -43,29 +40,35 @@ IPKG_KERNEL:=IPKG_TMP=$(BUILD_DIR)/tmp IPKG_INSTROOT=$(LINUX_TARGET_DIR) IPKG_CO
 PKG_BUILD_DIR := $(LINUX_BUILD_DIR)/linux-modules
 PKG_RELEASE := 1
 
-KERNEL_IPKG:=$(LINUX_BUILD_DIR)/kernel_$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)_$(ARCH).ipk
+KERNEL_IPKG:=$(LINUX_BUILD_DIR)/kernel-$(LINUX_VERSION)-$(BOARD)_$(PKG_RELEASE)_$(ARCH).ipk
 KERNEL_IDIR:=$(LINUX_BUILD_DIR)/kernel-ipkg
 
 include $(LINUX_KCONFIG)
+
+INSTALL_TARGETS := $(KERNEL_IPKG)
+TARGETS := 
+
 ifeq ($(BOARD),brcm)
 include ./broadcom.mk
 endif
 
-TARGETS := 
-INSTALL_TARGETS := $(KERNEL_IPKG)
+ifeq ($(BOARD),ar7)
+include ./ar7.mk
+endif
 
-$(eval $(call KMOD_template,DIAG,diag,\
-       $(MODULES_DIR)/kernel/drivers/net/diag/diag.o \
-))
-$(eval $(call KMOD_template,BRCM_WL,brcm-wl,\
-       $(MODULES_DIR)/kernel/drivers/net/wl/wl.o \
-,CONFIG_WL))
+$(eval $(call KMOD_template,ATM,atm,\
+       $(MODULES_DIR)/kernel/net/atm/atm.o \
+       $(MODULES_DIR)/kernel/net/atm/br2684.o \
+,CONFIG_ATM))
+$(eval $(call KMOD_template,PPPOATM,pppoatm,\
+       $(MODULES_DIR)/kernel/net/atm/pppoatm.o \
+,CONFIG_PPPOATM))
+$(eval $(call KMOD_template,USB_ACM,usb-acm,\
+       $(MODULES_DIR)/kernel/drivers/usb/acm.o \
+,CONFIG_USB_ACM))
 $(eval $(call KMOD_template,B44,b44,\
        $(MODULES_DIR)/kernel/drivers/net/b44.o \
 ,CONFIG_B44))
-$(eval $(call KMOD_template,BRCM_ET,brcm-et,\
-       $(MODULES_DIR)/kernel/drivers/net/et/et.o \
-,CONFIG_ET))
 $(eval $(call KMOD_template,ARPT,arptables,\
        $(MODULES_DIR)/kernel/net/ipv4/netfilter/arp*.o \
 ,CONFIG_IP_NF_ARPTABLES))
@@ -108,15 +111,13 @@ $(eval $(call KMOD_template,USB_STORAGE,usb-storage,\
 $(eval $(call KMOD_template,USB_PRINTER,usb-printer,\
        $(MODULES_DIR)/kernel/drivers/usb/printer.o \
 ,CONFIG_USB_PRINTER))
-$(eval $(call KMOD_template,LP,lp,\
-       $(MODULES_DIR)/kernel/drivers/parport/parport.o \
-       $(MODULES_DIR)/kernel/drivers/parport/parport_splink.o \
-       $(MODULES_DIR)/kernel/drivers/char/lp.o \
-,CONFIG_PARPORT))
 $(eval $(call KMOD_template,IDE,ide,\
        $(MODULES_DIR)/kernel/drivers/ide/*.o \
        $(MODULES_DIR)/kernel/drivers/ide/*/*.o \
 ,CONFIG_IDE))
+$(eval $(call KMOD_template,LOOP,loop,\
+    $(MODULES_DIR)/kernel/drivers/block/loop.o \
+,CONFIG_BLK_DEV_LOOP))
 $(eval $(call KMOD_template,EXT2,ext2,\
        $(MODULES_DIR)/kernel/fs/ext2/*.o \
 ,CONFIG_EXT2_FS))
@@ -164,7 +165,7 @@ $(TARGETS): $(PACKAGE_DIR)
 $(PACKAGE_DIR):
        mkdir -p $(PACKAGE_DIR)
 
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) $(DL_DIR)/$(LINUX_ET_DRIVER)
+$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
        -mkdir -p $(LINUX_BUILD_DIR)
        bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(LINUX_BUILD_DIR) $(TAR_OPTIONS) -
        rm -f $(LINUX_DIR)
@@ -172,8 +173,8 @@ $(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_BINARY_WL_DR
        touch $(LINUX_DIR)/.unpacked
 
 $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-       [ -d ./patches/$(BOARD) ] && $(PATCH) $(LINUX_DIR) ./patches/$(BOARD)
        $(PATCH) $(LINUX_DIR) ./patches/generic
+       [ -d ./patches/$(BOARD) ] && $(PATCH) $(LINUX_DIR) ./patches/$(BOARD)
        touch $(LINUX_DIR)/.patched
 
 $(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched
@@ -189,16 +190,13 @@ $(LINUX_DIR)/.depend_done:  $(LINUX_DIR)/.configured
        $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) dep
        touch $(LINUX_DIR)/.depend_done
 
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
-       $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) $(LINUX_FORMAT)
+$(LINUX_DIR)/vmlinux: $(LINUX_DIR)/.depend_done
+       $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH)
 
-$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC)
-       cp -fa $< $@ 
+$(LINUX_KERNEL): $(LINUX_DIR)/vmlinux
+       $(TARGET_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $< $@ 
        touch -c $(LINUX_KERNEL)
        
-$(LINUX_IMAGE): $(LINUX_KERNEL)
-       cat $^ | $(BUILD_DIR)/lzma/lzma e -si -so -eos -lc1 -lp2 -pb2 > $@ || (rm -f $@ && false)
-
 $(LINUX_DIR)/.modules_done: $(LINUX_KERNEL) $(LINUX_IMAGE)
        rm -rf $(LINUX_BUILD_DIR)/modules
        $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) modules
@@ -216,7 +214,8 @@ $(TARGET_MODULES_DIR):
 $(KERNEL_IPKG):
        rm -rf $(KERNEL_IDIR)
        mkdir -p $(KERNEL_IDIR)/etc
-       $(SCRIPT_DIR)/make-ipkg-dir.sh $(KERNEL_IDIR) ../control/kernel.control $(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE) $(ARCH)
+       $(SCRIPT_DIR)/make-ipkg-dir.sh $(KERNEL_IDIR) ../control/kernel.control $(PKG_RELEASE) $(ARCH)
+       echo 'Package: kernel-$(LINUX_VERSION)-$(BOARD)' >> $(KERNEL_IDIR)/CONTROL/control
        if [ -f ./config/$(BOARD).modules ]; then \
                cp ./config/$(BOARD).modules $(KERNEL_IDIR)/etc/modules; \
        fi