-diff -urN linux-2.4.30/Makefile linux-2.4.30.dev/Makefile
---- linux-2.4.30/Makefile 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/Makefile 2005-06-14 15:36:59.000000000 +0200
-@@ -91,7 +91,7 @@
-
- CPPFLAGS := -D__KERNEL__ -I$(HPATH)
-
--CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common
- ifndef CONFIG_FRAME_POINTER
- CFLAGS += -fomit-frame-pointer
-diff -urN linux-2.4.30/arch/mips/Makefile linux-2.4.30.dev/arch/mips/Makefile
---- linux-2.4.30/arch/mips/Makefile 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/Makefile 2005-06-14 15:36:59.000000000 +0200
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2005-10-21 16:43:16.316951500 +0200
++++ linux.dev/arch/mips/Makefile 2005-11-10 01:10:45.775570250 +0100
@@ -369,6 +369,16 @@
endif
+#
+
+ifdef CONFIG_AR7
-+LIBS += arch/mips/ar7/ar7.o arch/mips/ar7/avalanche/avalanche.o
-+SUBDIRS += arch/mips/ar7 arch/mips/ar7/avalanche
++LIBS += arch/mips/ar7/ar7.o
++SUBDIRS += arch/mips/ar7
+LOADADDR += 0x94020000
+endif
+
# DECstation family
#
ifdef CONFIG_DECSTATION
-diff -urN linux-2.4.30/arch/mips/ar7/Makefile linux-2.4.30.dev/arch/mips/ar7/Makefile
---- linux-2.4.30/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/Makefile 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,12 @@
+diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile
+--- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/Makefile 2005-11-10 01:13:51.443173750 +0100
+@@ -0,0 +1,14 @@
+.S.s:
+ $(CPP) $(AFLAGS) $< -o $*.s
+
+.S.o:
+ $(CC) $(AFLAGS) -c $< -o $*.o
+
++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_
+O_TARGET := ar7.o
+
-+obj-y := tnetd73xx_misc.o
-+obj-y += setup.o irq.o mipsIRQ.o reset.o init.o memory.o printf.o cmdline.o time.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux-2.4.30/arch/mips/ar7/avalanche/Makefile linux-2.4.30.dev/arch/mips/ar7/avalanche/Makefile
---- linux-2.4.30/arch/mips/ar7/avalanche/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/avalanche/Makefile 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,13 @@
-+.S.s:
-+ $(CPP) $(AFLAGS) $< -o $*.s
-+
-+.S.o:
-+ $(CC) $(AFLAGS) -c $< -o $*.o
-+
-+EXTRA_CFLAGS := -DLITTLE_ENDIAN -D_LINK_KSEG0_
-+
-+O_TARGET := avalanche.o
-+
-+obj-y += avalanche_paging.o avalanche_jump.o
++obj-y := tnetd73xx_misc.o misc.o
++export-objs := misc.o irq.o init.o
++obj-y += setup.o irq.o int-handler.o reset.o init.o psp_env.o memory.o promlib.o cmdline.o
+
+include $(TOPDIR)/Rules.make
-diff -urN linux-2.4.30/arch/mips/ar7/avalanche/avalanche_jump.S linux-2.4.30.dev/arch/mips/ar7/avalanche/avalanche_jump.S
---- linux-2.4.30/arch/mips/ar7/avalanche/avalanche_jump.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/avalanche/avalanche_jump.S 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,69 @@
-+#include <linux/config.h>
-+#include <linux/threads.h>
-+
-+#include <asm/asm.h>
-+#include <asm/cacheops.h>
-+#include <asm/current.h>
-+#include <asm/offset.h>
-+#include <asm/processor.h>
-+#include <asm/regdef.h>
-+#include <asm/cachectl.h>
-+#include <asm/mipsregs.h>
-+#include <asm/stackframe.h>
-+
-+.text
-+
-+.set noreorder
-+.set noat
-+
-+/* TLB Miss Vector */
-+
-+LEAF(jump_tlb_miss)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0
-+ jr k0
-+ nop
-+END(jump_tlb_miss)
-+
-+ /* Unused TLB Miss Vector */
-+
-+LEAF(jump_tlb_miss_unused)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x80
-+ jr k0
-+ nop
-+END(jump_tlb_miss_unused)
-+
-+ /* Cache Error Vector */
-+
-+LEAF(jump_cache_error)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x100
-+ jr k0
-+ nop
-+END(jump_cache_error)
-+
-+ /* General Exception */
-+
-+LEAF(jump_general_exception)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x180
-+ jr k0
-+ nop
-+END(jump_general_exception)
-+
-+ /* Dedicated Interrupt */
-+
-+LEAF(jump_dedicated_interrupt)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x200
-+ jr k0
-+ nop
-+END(jump_dedicated_interrupt)
-+
-+ .set at
-diff -urN linux-2.4.30/arch/mips/ar7/avalanche/avalanche_paging.c linux-2.4.30.dev/arch/mips/ar7/avalanche/avalanche_paging.c
---- linux-2.4.30/arch/mips/ar7/avalanche/avalanche_paging.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/avalanche/avalanche_paging.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,314 @@
-+/*
-+ * -*- linux-c -*-
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2002 by Jeff Harrell (jharrell@ti.com)
-+ * Copyright (C) 2002 Texas Instruments, Inc.
-+ *
-+ */
-+
-+/*
-+ * This file takes care of the "memory hole" issue that exists with the standard
-+ * linux kernel and the TI Avalanche ASIC. The Avalanche ASIC requires an offset
-+ * of 0x14000000 due to the ASIC's memory map constraints. This file corrects the
-+ * paging tables so that the only reflect valid memory (i.e. > 0x14000000)
-+ *
-+ * -JAH
-+ */
-+#include <linux/config.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/ptrace.h>
-+#include <linux/mman.h>
-+#include <linux/mm.h>
-+#include <linux/swap.h>
-+#include <linux/smp.h>
-+#include <linux/init.h>
-+#ifdef CONFIG_BLK_DEV_INITRD
-+#include <linux/blk.h>
-+#endif /* CONFIG_BLK_DEV_INITRD */
-+#include <linux/highmem.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/processor.h>
-+#include <asm/system.h>
-+#include <asm/uaccess.h>
-+#include <asm/pgtable.h>
-+#include <asm/pgalloc.h>
-+#include <asm/mmu_context.h>
-+#include <asm/io.h>
-+#include <asm/tlb.h>
-+#include <asm/cpu.h>
-+
-+#define __MEMORY_START CONFIG_AR7_MEMORY
-+
-+#ifdef CONFIG_DISCONTIGMEM
-+pg_data_t discontig_page_data[NR_NODES];
-+bootmem_data_t discontig_node_bdata[NR_NODES];
-+#endif
-+
-+static unsigned long totalram_pages;
-+/* static unsigned long totalhigh_pages; */
-+
-+#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-+#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
-+
-+#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
-+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
-+
-+unsigned long bootmap_size;
-+
-+extern char *prom_getenv(char *envname);
-+
-+/*
-+ * We have upto 8 empty zeroed pages so we can map one of the right colour
-+ * when needed. This is necessary only on R4000 / R4400 SC and MC versions
-+ * where we have to avoid VCED / VECI exceptions for good performance at
-+ * any price. Since page is never written to after the initialization we
-+ * don't have to care about aliases on other CPUs.
-+ */
-+
-+static inline unsigned long setup_zero_pages(void)
-+{
-+ unsigned long order, size;
-+ struct page *page;
-+ if(current_cpu_data.options & MIPS_CPU_VCE)
-+ order = 3;
-+ else
-+ order = 0;
-+
-+ empty_zero_page = __get_free_pages(GFP_KERNEL, order);
-+
-+ if (!empty_zero_page)
-+ panic("Oh boy, that early out of memory?");
-+
-+ page = virt_to_page(empty_zero_page);
-+
-+ while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) {
-+ set_bit(PG_reserved, &page->flags);
-+ set_page_count(page, 0);
-+ page++;
-+ }
-+
-+ size = PAGE_SIZE << order;
-+ zero_page_mask = (size - 1) & PAGE_MASK;
-+ memset((void *)empty_zero_page, 0, size);
-+
-+ return 1UL << order;
-+}
-+
-+/*
-+ * paging_init() sets up the page tables
-+ *
-+ * This routines also unmaps the page at virtual kernel address 0, so
-+ * that we can trap those pesky NULL-reference errors in the kernel.
-+ */
-+void __init paging_init(void)
-+{
-+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
-+ unsigned long low, start_pfn;
-+
-+ /* Initialize the entire pgd. */
-+ pgd_init((unsigned long)swapper_pg_dir);
-+ pgd_init((unsigned long)swapper_pg_dir + PAGE_SIZE / 2);
-+
-+
-+ start_pfn = START_PFN;
-+ // max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-+ low = MAX_LOW_PFN;
-+
-+ /* Avalanche DMA-able memory 0x14000000+memsize */
-+
-+ zones_size[ZONE_DMA] = low - start_pfn;
-+
-+ free_area_init_node(0, NODE_DATA(0), 0, zones_size, __MEMORY_START, 0);
-+
-+#ifdef CONFIG_DISCONTIGMEM
-+ zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT;
-+ zones_size[ZONE_NORMAL] = 0;
-+ free_area_init_node(1, NODE_DATA(1), 0, zones_size, __MEMORY_START_2ND, 0);
-+#endif /* CONFIG_DISCONTIGMEM */
-+
-+}
-+
-+extern char _ftext, _etext, _fdata, _edata, _end;
-+extern char __init_begin, __init_end;
-+
-+void __init mem_init(void)
-+{
-+ int codesize, reservedpages, datasize, initsize;
-+ int tmp;
-+
-+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
-+ high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
-+
-+ /* free up the memory associated with Adam2 -
-+ * that is the, after the first page that is
-+ * reserved all the way up to the start of the kernel
-+ */
-+ free_bootmem_node(NODE_DATA(0), (__MEMORY_START+PAGE_SIZE),
-+ (__pa(&_ftext))-(__MEMORY_START+PAGE_SIZE) );
-+
-+ /* this will put all low memory onto the freelists */
-+ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
-+
-+ /* Setup zeroed pages */
-+ totalram_pages -= setup_zero_pages();
-+
-+
-+#ifdef CONFIG_DISCONTIGMEM
-+ totalram_pages += free_all_bootmem_node(NODE_DATA(1));
-+#endif
-+ reservedpages = 0;
-+ for (tmp = 0; tmp < num_physpages; tmp++)
-+ /*
-+ * Only count reserved RAM pages
-+ */
-+ if (PageReserved(mem_map+tmp))
-+ reservedpages++;
-+
-+ codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
-+ datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
-+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
-+
-+ printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
-+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-+ max_mapnr << (PAGE_SHIFT-10),
-+ codesize >> 10,
-+ reservedpages << (PAGE_SHIFT-10),
-+ datasize >> 10,
-+ initsize >> 10);
-+
-+}
-+
-+/* fixes paging routines for avalanche (utilized in /arch/mips/kernel/setup.c) */
-+
-+void avalanche_bootmem_init(void)
-+{
-+ unsigned long start_pfn, max_pfn;
-+ unsigned long max_low_pfn;
-+ unsigned int memsize,memory_end,memory_start;
-+ char *memsize_str;
-+
-+ memsize_str = prom_getenv("memsize");
-+ if (!memsize_str) {
-+ memsize = 0x02000000;
-+ } else {
-+ memsize = simple_strtol(memsize_str, NULL, 0);
-+ }
-+
-+
-+ memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
-+ memory_end = memory_start + memsize;
-+
-+ /*
-+ * Find the highest memory page fram number we have available
-+ */
-+
-+ max_pfn = PFN_DOWN(__pa(memory_end));
-+
-+ /*
-+ * Determine the low and high memory ranges
-+ */
-+
-+ max_low_pfn = max_pfn;
-+
-+ /*
-+ * Partially used pages are not usable - thus we are
-+ * rounding upwards:
-+ */
-+
-+ start_pfn = PFN_UP(__pa(&_end));
-+
-+ /*
-+ * Find a proper area for the bootmem bitmap. After this
-+ * bootstrap step all allocations (until the page allocator is
-+ * intact) must be done via bootmem_alloc().
-+ */
-+
-+ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
-+ __MEMORY_START>>PAGE_SHIFT, max_low_pfn);
-+
-+
-+ /*
-+ * Register fully available low RAM pages with the bootmem allocator.
-+ */
-+
-+ {
-+ unsigned long curr_pfn, last_pfn, pages;
-+
-+ /*
-+ * We are rounding up the start address of usable memory:
-+ */
-+ curr_pfn = PFN_UP(__MEMORY_START);
-+
-+ /*
-+ * ... and at the end of the usable range downwards:
-+ */
-+ last_pfn = PFN_DOWN(__pa(memory_end));
-+
-+ if (last_pfn > max_low_pfn)
-+ last_pfn = max_low_pfn;
-+
-+ pages = last_pfn - curr_pfn;
-+
-+
-+ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
-+ PFN_PHYS(pages));
-+ }
-+
-+ /*
-+ * Reserve the kernel text and
-+ * Reserve the bootmem bitmap. We do this in two steps (first step
-+ * was init_bootmem()), because this catches the (definitely buggy)
-+ * case of us accidentally initializing the bootmem allocator with
-+ * an invalid RAM area.
-+ */
-+ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
-+ (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
-+
-+ /*
-+ * reserve physical page 0 - it's a special BIOS page on many boxes,
-+ * enabling clean reboots, SMP operation, laptop functions.
-+ */
-+ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
-+}
-+
-+extern char __init_begin, __init_end;
-+
-+void free_initmem(void)
-+{
-+ unsigned long addr;
-+ // prom_free_prom_memory ();
-+
-+ addr = (unsigned long) &__init_begin;
-+ while (addr < (unsigned long) &__init_end) {
-+ ClearPageReserved(virt_to_page(addr));
-+ set_page_count(virt_to_page(addr), 1);
-+ free_page(addr);
-+ totalram_pages++;
-+ addr += PAGE_SIZE;
-+ }
-+ printk("Freeing unused kernel memory: %dk freed\n",
-+ (&__init_end - &__init_begin) >> 10);
-+}
-+
-+void si_meminfo(struct sysinfo *val)
-+{
-+ val->totalram = totalram_pages;
-+ val->sharedram = 0;
-+ val->freeram = nr_free_pages();
-+ val->bufferram = atomic_read(&buffermem_pages);
-+ val->totalhigh = 0;
-+ val->freehigh = nr_free_highpages();
-+ val->mem_unit = PAGE_SIZE;
-+
-+ return;
-+}
-diff -urN linux-2.4.30/arch/mips/ar7/cmdline.c linux-2.4.30.dev/arch/mips/ar7/cmdline.c
---- linux-2.4.30/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/cmdline.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,64 @@
+diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c
+--- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/cmdline.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,88 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
+
+char arcs_cmdline[CL_SIZE];
++#ifdef CONFIG_CMDLINE_BOOL
++char __initdata cfg_cmdline[] = CONFIG_CMDLINE;
++#endif
+
+char * __init prom_getcmdline(void)
+{
+
+void __init prom_init_cmdline(void)
+{
-+ char *cp;
++ char *cp, *end;
+ int actr;
++ char *env_cmdline = prom_getenv("kernel_args");
++ size_t len;
+
+ actr = 1; /* Always ignore argv[0] */
+
-+ cp = &(arcs_cmdline[0]);
++ cp = end = &(arcs_cmdline[0]);
++ end += sizeof(arcs_cmdline);
++
++ if (env_cmdline) {
++ len = strlen(env_cmdline);
++ if (len > end - cp - 1)
++ len = end - cp - 1;
++ strncpy(cp, env_cmdline, len);
++ cp += len;
++ *cp++ = ' ';
++ }
+#ifdef CONFIG_CMDLINE_BOOL
-+ strcpy(cp, CONFIG_CMDLINE);
-+ cp += strlen(CONFIG_CMDLINE);
-+ *cp++ = ' ';
++ else {
++ len = strlen(cfg_cmdline);
++ if (len > end - cp - 1)
++ len = end - cp - 1;
++ strncpy(cp, cfg_cmdline, len);
++ cp += len;
++ *cp++ = ' ';
++ }
+#endif
++
+ while(actr < prom_argc) {
-+ strcpy(cp, prom_argv(actr));
-+ cp += strlen(prom_argv(actr));
++ len = strlen(prom_argv(actr));
++ if (len > end - cp - 1)
++ break;
++ strncpy(cp, prom_argv(actr), len);
++ cp += len;
+ *cp++ = ' ';
+ actr++;
+ }
+ --cp;
+ *cp = '\0';
+}
-diff -urN linux-2.4.30/arch/mips/ar7/init.c linux-2.4.30.dev/arch/mips/ar7/init.c
---- linux-2.4.30/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/init.c 2005-06-14 19:15:15.000000000 +0200
-@@ -0,0 +1,144 @@
+diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c
+--- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/init.c 2005-11-10 01:10:45.795571500 +0100
+@@ -0,0 +1,199 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
++#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/generic.h>
+
-+/* Environment variable */
-+typedef struct {
-+ char *name;
-+ char *val;
-+} t_env_var;
++#include <asm/ar7/adam2_env.h>
+
+int prom_argc;
+int *_prom_argv, *_prom_envp;
+#define MAX_ENV_ENTRY 80
+
+static t_env_var local_envp[MAX_ENV_ENTRY];
-+
++static int env_type = 0;
+int init_debug = 0;
+
-+char *prom_getenv(char *envname)
++unsigned int max_env_entry;
++
++extern char *prom_psp_getenv(char *envname);
++
++static inline char *prom_adam2_getenv(char *envname)
+{
+ /*
+ * Return a pointer to the given environment variable.
+ * in the PROM structures are only 32-bit, so we need some
+ * workarounds, if we are running in 64-bit mode.
+ */
-+ int i, index=0;
++ int i;
+ t_env_var *env = (t_env_var *) local_envp;
+
++ if (strcmp("bootloader", envname) == 0)
++ return "Adam2";
++
+ i = strlen(envname);
+ while (env->name) {
+ if(strncmp(envname, env->name, i) == 0) {
+ return NULL;
+}
+
++/* XXX "bootloader" won't be returned.
++ * Better make it an element of local_envp */
++static inline t_env_var *
++prom_adam2_iterenv(t_env_var *env) {
++ if (!env)
++ env = local_envp;
++ else
++ env++;
++ if (env - local_envp > MAX_ENV_ENTRY || !env->name)
++ return 0;
++ return env;
++}
++
++char *prom_getenv(char *envname)
++{
++ if (env_type == 1)
++ return prom_psp_getenv(envname);
++ else
++ return prom_adam2_getenv(envname);
++}
++
++t_env_var *
++prom_iterenv(t_env_var *last)
++{
++ if (env_type == 1)
++ return 0; /* not yet implemented */
++ return prom_adam2_iterenv(last);
++}
++
+static inline unsigned char str2hexnum(unsigned char c)
+{
+ if (c >= '0' && c <= '9')
+ return 0;
+}
+
++struct psbl_rec {
++ unsigned int psbl_size;
++ unsigned int env_base;
++ unsigned int env_size;
++ unsigned int ffs_base;
++ unsigned int ffs_size;
++};
++
++static const char psp_env_version[] = "TIENV0.8";
++
+int __init prom_init(int argc, char **argv, char **envp)
+{
+ int i;
++
+ t_env_var *env = (t_env_var *) envp;
++ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300));
++ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+ prom_argc = argc;
+ _prom_argv = (int *)argv;
+ _prom_envp = (int *)envp;
+
-+ /* Copy what we need locally so we are not dependent on
-+ * bootloader RAM. In Adam2, the environment parameters
-+ * are in flash but the table that references them is in
-+ * RAM
-+ */
-+ for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
-+ if (env->name) {
-+ local_envp[i].name = env->name;
-+ local_envp[i].val = env->val;
-+ } else {
-+ local_envp[i].name = NULL;
-+ local_envp[i].val = NULL;
++ if(strcmp(psp_env, psp_env_version) == 0) {
++ /* PSPBOOT */
++
++ env_type = 1;
++ _prom_envp = psp_env;
++ max_env_entry = (psbl->env_size / 16) - 1;
++ } else {
++ /* Copy what we need locally so we are not dependent on
++ * bootloader RAM. In Adam2, the environment parameters
++ * are in flash but the table that references them is in
++ * RAM
++ */
++
++ for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
++ if (env->name) {
++ local_envp[i].name = env->name;
++ local_envp[i].val = env->val;
++ } else {
++ local_envp[i].name = NULL;
++ local_envp[i].val = NULL;
++ }
+ }
+ }
+
+
+ return 0;
+}
-diff -urN linux-2.4.30/arch/mips/ar7/irq.c linux-2.4.30.dev/arch/mips/ar7/irq.c
---- linux-2.4.30/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/irq.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,669 @@
+diff -urN linux.old/arch/mips/ar7/int-handler.S linux.dev/arch/mips/ar7/int-handler.S
+--- linux.old/arch/mips/ar7/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/int-handler.S 2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,63 @@
++/*
++ * Copyright 2004 PMC-Sierra Inc.
++ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
++ * Adaption for AR7: Enrik Berkhan <enrik@akk.org>
++ *
++ * First-level interrupt dispatcher for the TI AR7
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++#define __ASSEMBLY__
++#include <linux/config.h>
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * First level interrupt dispatcher for TI AR7 based boards
++ */
++
++ .align 5
++ NESTED(ar7IRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set at
++
++ mfc0 t0, CP0_CAUSE
++ mfc0 t2, CP0_STATUS
++
++ and t0, t2
++
++ andi t1, t0, STATUSF_IP2 /* hw0 hardware interrupt */
++ bnez t1, ll_hw0_irq
++
++ andi t1, t0, STATUSF_IP7 /* R4k CPU timer */
++ bnez t1, ll_timer_irq
++
++ .set reorder
++
++ /* wrong alarm or masked ... */
++ j spurious_interrupt
++ nop
++ END(ar7IRQ)
++
++ .align 5
++
++ll_hw0_irq:
++ li a0, 2
++ move a1, sp
++ jal do_IRQ
++ j ret_from_irq
++
++ll_timer_irq:
++ li a0, 7
++ move a1, sp
++ jal do_IRQ
++ j ret_from_irq
++
++
+diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c
+--- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/irq.c 2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,427 @@
+/*
+ * Nitin Dhingra, iamnd@ti.com
+ * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved.
+ *
+ */
+
-+#include <linux/config.h>
+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/proc_fs.h>
++
+#include <asm/irq.h>
-+#include <asm/mips-boards/prom.h>
++#include <asm/mipsregs.h>
+#include <asm/ar7/ar7.h>
+#include <asm/ar7/avalanche_intc.h>
-+#include <asm/gdb-stub.h>
-+
+
+#define shutdown_avalanche_irq disable_avalanche_irq
+#define mask_and_ack_avalanche_irq disable_avalanche_irq
+static void end_avalanche_irq(unsigned int irq);
+void enable_avalanche_irq(unsigned int irq_nr);
+void disable_avalanche_irq(unsigned int irq_nr);
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs);
+
+static struct hw_interrupt_type avalanche_irq_type = {
-+ "TI AVALANCHE",
++ "AR7",
+ startup_avalanche_irq,
+ shutdown_avalanche_irq,
+ enable_avalanche_irq,
+ NULL
+};
+
-+irq_desc_t irq_desc_ti[AVALANCHE_INT_END+1] __cacheline_aligned =
-+{ [0 ... AVALANCHE_INT_END] = { 0, &avalanche_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}};
++static int ar7_irq_base;
+
-+
-+unsigned long spurious_count = 0;
++static struct irqaction ar7_hw0_action = {
++ ar7_hw0_interrupt, 0, 0, "AR7 on hw0", NULL, NULL
++};
+
+struct avalanche_ictrl_regs *avalanche_hw0_icregs; /* Interrupt control regs (primary) */
+struct avalanche_exctrl_regs *avalanche_hw0_ecregs; /* Exception control regs (secondary) */
+struct avalanche_ipace_regs *avalanche_hw0_ipaceregs;
+struct avalanche_channel_int_number *avalanche_hw0_chregs; /* Channel control registers */
+
-+extern asmlinkage void mipsIRQ(void);
-+
-+
-+/*
-+ * The avalanche/MIPS interrupt line numbers are used to represent the
-+ * interrupts within the irqaction arrays. The index notation is
-+ * is as follows:
-+ *
-+ * 0-7 MIPS CPU Exceptions (HW/SW)
-+ * 8-47 Primary Interrupts (Avalanche)
-+ * 48-79 Secondary Interrupts (Avalanche)
-+ *
-+ */
-+
-+
-+static struct irqaction *hw0_irq_action_primary[AVINTNUM(AVALANCHE_INT_END_PRIMARY)] =
-+{
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL
-+};
-+
-+static struct irqaction *hw0_irq_action_secondary[AVINTNUM(AVALANCHE_INT_END_SECONDARY)] =
-+{
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL
-+};
-+
+/*
+ This remaps interrupts to exist on other channels than the default
+ channels. essentially we can use the line # as the index for this
+ array
+ */
+
-+
+static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
+unsigned long uni_secondary_interrupt = 0;
+
-+static struct irqaction r4ktimer_action = {
-+ NULL, 0, 0, "R4000 timer/counter", NULL, NULL,
-+};
-+
-+static struct irqaction *irq_action[8] = {
-+ NULL, /* SW int 0 */
-+ NULL, /* SW int 1 */
-+ NULL, /* HW int 0 */
-+ NULL,
-+ NULL,
-+ NULL, /* HW int 3 */
-+ NULL, /* HW int 4 */
-+ &r4ktimer_action /* HW int 5 */
-+};
-+
+static void end_avalanche_irq(unsigned int irq)
+{
-+ if (!(irq_desc_ti[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_avalanche_irq(irq);
+}
+
+{
+ unsigned long flags;
+ unsigned long chan_nr=0;
-+ unsigned long int_bit=0;
-+
-+ if(irq_nr >= AVALANCHE_INT_END)
-+ {
-+ printk("whee, invalid irq_nr %d\n", irq_nr);
-+ panic("IRQ, you lose...");
-+ }
+
+ save_and_cli(flags);
+
-+
-+ if(irq_nr < MIPS_EXCEPTION_OFFSET)
-+ {
-+ /* disable mips exception */
-+
-+ int_bit = read_c0_status() & ~(1 << (8+irq_nr));
-+ change_c0_status(ST0_IM,int_bit);
-+ restore_flags(flags);
-+ return;
-+ }
-+
+ /* irq_nr represents the line number for the interrupt. We must
+ * disable the channel number associated with that line number.
+ */
+{
+ unsigned long flags;
+ unsigned long chan_nr=0;
-+ unsigned long int_bit=0;
-+
-+ if(irq_nr > AVALANCHE_INT_END) {
-+ printk("whee, invalid irq_nr %d\n", irq_nr);
-+ panic("IRQ, you lose...");
-+ }
+
+ save_and_cli(flags);
+
-+
-+ if(irq_nr < MIPS_EXCEPTION_OFFSET)
-+ {
-+ /* Enable MIPS exceptions */
-+ int_bit = read_c0_status();
-+ change_c0_status(ST0_IM,int_bit | (1<<(8+irq_nr)));
-+ restore_flags(flags);
-+ return;
-+ }
-+
+ /* irq_nr represents the line number for the interrupt. We must
+ * disable the channel number associated with that line number.
+ */
+ return 0; /* never anything pending */
+}
+
-+
-+int get_irq_list(char *buf)
-+{
-+ int i, len = 0;
-+ int num = 0;
-+ struct irqaction *action;
-+
-+ for (i = 0; i < MIPS_EXCEPTION_OFFSET; i++, num++)
-+ {
-+ action = irq_action[i];
-+ if (!action)
-+ continue;
-+ len += sprintf(buf+len, "%2d: %8d %c %s",
-+ num, kstat.irqs[0][num],
-+ (action->flags & SA_INTERRUPT) ? '+' : ' ',
-+ action->name);
-+ for (action=action->next; action; action = action->next) {
-+ len += sprintf(buf+len, ",%s %s",
-+ (action->flags & SA_INTERRUPT) ? " +" : "",
-+ action->name);
-+ }
-+ len += sprintf(buf+len, " [MIPS interrupt]\n");
-+ }
-+
-+
-+ for (i = 0; i < AVINTNUM(AVALANCHE_INT_END); i++,num++)
-+ {
-+ if(i < AVINTNUM(AVALANCHE_INT_END_PRIMARY))
-+ action = hw0_irq_action_primary[i];
-+ else
-+ action = hw0_irq_action_secondary[i-AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
-+ if (!action)
-+ continue;
-+ len += sprintf(buf+len, "%2d: %8d %c %s",
-+ num, kstat.irqs[0][ LNXINTNUM(i) ],
-+ (action->flags & SA_INTERRUPT) ? '+' : ' ',
-+ action->name);
-+
-+ for (action=action->next; action; action = action->next)
-+ {
-+ len += sprintf(buf+len, ",%s %s",
-+ (action->flags & SA_INTERRUPT) ? " +" : "",
-+ action->name);
-+ }
-+
-+ if(i < AVINTNUM(AVALANCHE_INT_END_PRIMARY))
-+ len += sprintf(buf+len, " [hw0 (Avalanche Primary)]\n");
-+ else
-+ len += sprintf(buf+len, " [hw0 (Avalanche Secondary)]\n");
-+
-+ }
-+
-+ return len;
-+}
-+
-+int request_irq(unsigned int irq,
-+ void (*handler)(int, void *, struct pt_regs *),
-+ unsigned long irqflags,
-+ const char * devname,
-+ void *dev_id)
-+{
-+ struct irqaction *action;
-+
-+ if (irq > AVALANCHE_INT_END)
-+ return -EINVAL;
-+ if (!handler)
-+ return -EINVAL;
-+
-+ action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
-+ if(!action)
-+ return -ENOMEM;
-+
-+ action->handler = handler;
-+ action->flags = irqflags;
-+ action->mask = 0;
-+ action->name = devname;
-+ irq_desc_ti[irq].action = action;
-+ action->dev_id = dev_id;
-+
-+ action->next = 0;
-+
-+ if(irq < MIPS_EXCEPTION_OFFSET)
-+ {
-+ irq_action[irq] = action;
-+ enable_avalanche_irq(irq);
-+ return 0;
-+ }
-+
-+ if(irq < AVALANCHE_INT_END_PRIMARY)
-+ hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]] = action;
-+ else
-+ hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY] = action;
-+
-+ enable_avalanche_irq(irq);
-+
-+ return 0;
-+}
-+
-+void free_irq(unsigned int irq, void *dev_id)
-+{
-+ struct irqaction *action;
-+
-+ if (irq > AVALANCHE_INT_END) {
-+ printk("Trying to free IRQ%d\n",irq);
-+ return;
-+ }
-+
-+ if(irq < MIPS_EXCEPTION_OFFSET)
-+ {
-+ action = irq_action[irq];
-+ irq_action[irq] = NULL;
-+ irq_desc_ti[irq].action = NULL;
-+ disable_avalanche_irq(irq);
-+ kfree(action);
-+ return;
-+ }
-+
-+ if(irq < AVALANCHE_INT_END_PRIMARY) {
-+ action = hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]];
-+ hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]] = NULL;
-+ irq_desc_ti[irq].action = NULL;
-+ }
-+ else {
-+ action = hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY];
-+ hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY] = NULL;
-+ irq_desc_ti[irq].action = NULL;
-+ }
-+
-+ disable_avalanche_irq(irq);
-+ kfree(action);
-+}
-+
-+#ifdef CONFIG_KGDB
-+extern void breakpoint(void);
-+extern int remote_debug;
-+#endif
-+
-+//void init_IRQ(void) __init;
-+void __init init_IRQ(void)
++void __init ar7_irq_init(int base)
+{
+ int i;
+
+ for(i = 0; i < 40; i++)
+ avalanche_int_set(i,i);
+
-+ /* Now safe to set the exception vector. */
-+ set_except_vector(0, mipsIRQ);
-+
-+ /* Setup the IRQ description array. These will be mapped
-+ * as flat interrupts numbers. The mapping is as follows
-+ *
-+ * 0-7 MIPS CPU Exceptions (HW/SW)
-+ * 8-46 Primary Interrupts (Avalanche)
-+ * 47-78 Secondary Interrupts (Avalanche)
-+ */
-+
-+ for (i = 0; i <= AVALANCHE_INT_END; i++)
++ ar7_irq_base = base;
++ for (i = base; i <= base+40; i++)
+ {
-+ irq_desc_ti[i].status = IRQ_DISABLED;
-+ irq_desc_ti[i].action = 0;
-+ irq_desc_ti[i].depth = 1;
-+ irq_desc_ti[i].handler = &avalanche_irq_type;
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &avalanche_irq_type;
+ }
+
-+#ifdef CONFIG_KGDB
-+ if (remote_debug)
-+ {
-+ set_debug_traps();
-+ breakpoint();
-+ }
-+#endif
-+}
++ setup_irq(2, &ar7_hw0_action);
++ set_c0_status(IE_IRQ0);
+
++ return;
++}
+
-+void avalanche_hw0_irqdispatch(struct pt_regs *regs)
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs)
+{
-+ struct irqaction *action;
-+ int irq, cpu = smp_processor_id();
-+ unsigned long int_line_number,status;
-+ int i,secondary = 0;
-+ int chan_nr=0;
++ int irq;
++ unsigned long int_line_number, status;
++ int i, chan_nr = 0;
+
+ int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
+ chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
+
-+
-+ if(chan_nr < 32)
++ if(chan_nr < 32) /* primary 0-31 */
+ {
+ if( chan_nr != uni_secondary_interrupt)
+ avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
+
+ }
+
-+ if((chan_nr < 40) && (chan_nr > 31))
++ if((chan_nr < 40) && (chan_nr > 31)) /* primary 32-39 */
+ {
-+ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-32));
+ }
+
+
+ if(chan_nr == 40)
+ return;
+
-+ if(chan_nr == uni_secondary_interrupt)
++ if(chan_nr == uni_secondary_interrupt) /* secondary 0-31 */
+ {
+ status = avalanche_hw0_ecregs->exsr;
-+ for(i=0; i < AVINTNUM(AVALANCHE_INT_END_SECONDARY); i++)
++ for(i=0; i < 32; i++)
+ {
+ if (status & 1<<i)
+ {
+ break;
+ }
+ }
-+ irq = i;
-+ secondary = 1;
++ irq = i+40;
+
+ /* clear the universal secondary interrupt */
+ avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
+ else
+ irq = chan_nr;
+
-+ /* Suraj Add code to clear secondary interrupt */
-+
-+ if(secondary)
-+ action = hw0_irq_action_secondary[irq];
-+ else
-+ action = hw0_irq_action_primary[irq];
-+
-+ /* if action == NULL, then we don't have a handler for the irq */
-+
-+ if ( action == NULL ) {
-+ printk("No handler for hw0 irq: %i\n", irq);
-+ return;
-+ }
-+
-+ irq_enter(cpu,irq);
-+ if(secondary)
-+ {
-+ kstat.irqs[0][(irq + AVINTNUM(AVALANCHE_INT_END_PRIMARY)) + 8]++;
-+ action->handler((irq + AVALANCHE_INT_END_PRIMARY), action->dev_id, regs);
-+ }
-+ else
-+ {
-+ kstat.irqs[0][irq + 8]++;
-+ action->handler(LNXINTNUM(irq), action->dev_id, regs);
-+ }
-+
-+ irq_exit(cpu,irq);
-+
-+ if(softirq_pending(cpu))
-+ do_softirq();
-+
++ do_IRQ(irq + ar7_irq_base, regs);
+ return;
+}
+
+
+}
+
-diff -urN linux-2.4.30/arch/mips/ar7/memory.c linux-2.4.30.dev/arch/mips/ar7/memory.c
---- linux-2.4.30/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/memory.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,130 @@
++
++#define AVALANCHE_MAX_PACING_BLK 3
++#define AVALANCHE_PACING_LOW_VAL 2
++#define AVALANCHE_PACING_HIGH_VAL 63
++
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num,
++ unsigned int pace_value)
++{
++ unsigned int blk_offset;
++ unsigned long flags;
++
++ if(irq_nr < MIPS_EXCEPTION_OFFSET &&
++ irq_nr >= AVALANCHE_INT_END_PRIMARY)
++ return (0);
++
++ if(blk_num > AVALANCHE_MAX_PACING_BLK)
++ return(-1);
++
++ if(pace_value > AVALANCHE_PACING_HIGH_VAL &&
++ pace_value < AVALANCHE_PACING_LOW_VAL)
++ return(-1);
++
++ blk_offset = blk_num*8;
++
++ save_and_cli(flags);
++
++ /* disable the interrupt pacing, if enabled previously */
++ avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset);
++
++ /* clear the pacing map */
++ avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset);
++
++ /* setup the new values */
++ avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr)) << blk_offset);
++ avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value) << blk_offset);
++
++ restore_flags(flags);
++
++ return(0);
++}
+diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c
+--- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/memory.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,103 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
-+ * PROM library functions for acquiring/using memory descriptors given to
-+ * us from the YAMON.
-+ *
+ */
++
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/mips-boards/prom.h>
-+#include <asm/ar7/ar7.h>
-+
-+enum yamon_memtypes {
-+ yamon_dontuse,
-+ yamon_prom,
-+ yamon_free,
-+};
-+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-+
-+/* References to section boundaries */
-+extern char _end;
+
-+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
++extern char _ftext;
++extern int preserve_adam2;
+
-+
-+struct prom_pmemblock * __init prom_getmdesc(void)
++void __init prom_meminit(void)
+{
+ char *memsize_str;
-+ unsigned int memsize;
++ unsigned long memsize, adam2size;
++
++ /* assume block before kernel is used by bootloader */
++ adam2size = __pa(&_ftext) - PHYS_OFFSET;
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+
-+ memset(mdesc, 0, sizeof(mdesc));
++#if 0
++ add_memory_region(0x00000000, PHYS_OFFSET, BOOT_MEM_RESERVED);
++#endif
++ add_memory_region(PHYS_OFFSET, adam2size, BOOT_MEM_ROM_DATA);
++ add_memory_region(PHYS_OFFSET+adam2size, memsize-adam2size,
++ BOOT_MEM_RAM);
++}
+
-+ mdesc[0].type = yamon_dontuse;
-+ mdesc[0].base = 0x00000000;
-+ mdesc[0].size = AVALANCHE_SDRAM_BASE;
++unsigned long __init prom_free_prom_memory (void)
++{
++ int i;
++ unsigned long freed = 0;
++ unsigned long addr;
+
-+ mdesc[1].type = yamon_prom;
-+ mdesc[1].base = AVALANCHE_SDRAM_BASE;
-+ mdesc[1].size = 0x00020000;
++ if (preserve_adam2) {
++ char *firstfree_str = prom_getenv("firstfreeaddress");
++ unsigned long firstfree = 0;
+
-+ mdesc[2].type = yamon_free;
-+ mdesc[2].base = AVALANCHE_SDRAM_BASE + 0x00020000;
-+ mdesc[2].size = (memsize + AVALANCHE_SDRAM_BASE) - mdesc[2].base;
++ if (firstfree_str)
++ firstfree = simple_strtol(firstfree_str, NULL, 0);
+
-+ return &mdesc[0];
-+}
++ if (firstfree && firstfree < (unsigned long)&_ftext) {
++ printk("Preserving ADAM2 memory.\n");
++ } else if (firstfree) {
++ printk("Can't preserve ADAM2 memory, "
++ "firstfreeaddress = %08lx.\n", firstfree);
++ preserve_adam2 = 0;
++ } else {
++ printk("Can't preserve ADAM2 memory, "
++ "firstfreeaddress unknown!\n");
++ preserve_adam2 = 0;
++ }
++ }
+
-+static int __init prom_memtype_classify (unsigned int type)
-+{
-+ switch (type) {
-+ case yamon_free:
-+ return BOOT_MEM_RAM;
-+ case yamon_prom:
-+ return BOOT_MEM_ROM_DATA;
-+ default:
-+ return BOOT_MEM_RESERVED;
++ if (!preserve_adam2) {
++ for (i = 0; i < boot_mem_map.nr_map; i++) {
++ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
++ continue;
++
++ addr = boot_mem_map.map[i].addr;
++ while (addr < boot_mem_map.map[i].addr
++ + boot_mem_map.map[i].size) {
++ ClearPageReserved(virt_to_page(__va(addr)));
++ set_page_count(virt_to_page(__va(addr)), 1);
++ free_page((unsigned long)__va(addr));
++ addr += PAGE_SIZE;
++ freed += PAGE_SIZE;
++ }
++ }
++ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
+ }
++ return freed >> PAGE_SHIFT;
+}
+diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c
+--- linux.old/arch/mips/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/misc.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,322 @@
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
+
-+void __init prom_meminit(void)
-+{
-+ struct prom_pmemblock *p;
-+
-+ p = prom_getmdesc();
++#define TRUE 1
+
-+ while (p->size) {
-+ long type;
-+ unsigned long base, size;
++static unsigned int avalanche_vbus_freq;
+
-+ type = prom_memtype_classify (p->type);
-+ base = p->base;
-+ size = p->size;
++REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL;
+
-+ add_memory_region(base, size, type);
-+ p++;
++/*****************************************************************************
++ * Reset Control Module.
++ *****************************************************************************/
++void avalanche_reset_ctrl(unsigned int module_reset_bit,
++ AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++
++ if(module_reset_bit >= 32 && module_reset_bit < 64)
++ return;
++
++ if(module_reset_bit >= 64)
++ {
++ if(p_remote_vlynq_dev_reset_ctrl) {
++ p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl);
++ return;
+ }
++ else
++ return;
++ }
++
++ if(reset_ctrl == OUT_OF_RESET)
++ *reset_reg |= 1 << module_reset_bit;
++ else
++ *reset_reg &= ~(1 << module_reset_bit);
++ return;
+}
+
-+void __init prom_free_prom_memory (void)
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit)
+{
-+ int i;
-+ unsigned long freed = 0;
-+ unsigned long addr;
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
+
-+ for (i = 0; i < boot_mem_map.nr_map; i++) {
-+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-+ continue;
++ return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET );
++}
+
-+ addr = boot_mem_map.map[i].addr;
-+ while (addr < boot_mem_map.map[i].addr
-+ + boot_mem_map.map[i].size) {
-+ ClearPageReserved(virt_to_page(__va(addr)));
-+ set_page_count(virt_to_page(__va(addr)), 1);
-+ free_page((unsigned long)__va(addr));
-+ addr += PAGE_SIZE;
-+ freed += PAGE_SIZE;
-+ }
-+ }
-+ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode)
++{
++ volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR;
++ *sw_reset_reg = mode;
+}
-diff -urN linux-2.4.30/arch/mips/ar7/mipsIRQ.S linux-2.4.30.dev/arch/mips/ar7/mipsIRQ.S
---- linux-2.4.30/arch/mips/ar7/mipsIRQ.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/mipsIRQ.S 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,120 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Interrupt exception dispatch code.
-+ *
-+ */
-+#include <linux/config.h>
+
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
++#define AVALANCHE_RST_CTRL_RSR_MASK 0x3
+
-+/* A lot of complication here is taken away because:
-+ *
-+ * 1) We handle one interrupt and return, sitting in a loop and moving across
-+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
-+ * common case is one pending IRQ so optimize in that direction.
-+ *
-+ * 2) We need not check against bits in the status register IRQ mask, that
-+ * would make this routine slow as hell.
-+ *
-+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
-+ * between like BSD spl() brain-damage.
-+ *
-+ * Furthermore, the IRQs on the MIPS board look basically (barring software
-+ * IRQs which we don't use at all and all external interrupt sources are
-+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
-+ *
-+ * MIPS IRQ Source
-+ * -------- ------
-+ * 0 Software (ignored)
-+ * 1 Software (ignored)
-+ * 2 Combined hardware interrupt (hw0)
-+ * 3 Hardware (ignored)
-+ * 4 Hardware (ignored)
-+ * 5 Hardware (ignored)
-+ * 6 Hardware (ignored)
-+ * 7 R4k timer (what we use)
-+ *
-+ * Note: On the SEAD board thing are a little bit different.
-+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
-+ * wired to UART1.
-+ *
-+ * We handle the IRQ according to _our_ priority which is:
-+ *
-+ * Highest ---- R4k Timer
-+ * Lowest ---- Combined hardware interrupt
-+ *
-+ * then we just return, if multiple IRQs are pending then we will just take
-+ * another exception, big deal.
-+ */
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status()
++{
++ volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR;
+
-+.text
-+.set noreorder
-+.set noat
-+ .align 5
-+NESTED(mipsIRQ, PT_SIZE, sp)
-+ SAVE_ALL
-+ CLI
-+ .set at
++ return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) );
++}
+
-+ mfc0 s0, CP0_CAUSE # get irq bits
+
-+ /* First we check for r4k counter/timer IRQ. */
-+ andi a0, s0, CAUSEF_IP7
-+ beq a0, zero, 1f
-+ andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define AVALANCHE_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */
++#define AVALANCHE_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */
+
-+ /* Wheee, a timer interrupt. */
-+ move a0, sp
-+ jal ar7_timer_interrupt
-+ nop
+
-+ j ret_from_irq
-+ nop
++void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl)
++{
++ volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++ if (power_ctrl == POWER_CTRL_POWER_DOWN)
++ /* power down the module */
++ *power_reg |= (1 << module_power_bit);
++ else
++ /* power on the module */
++ *power_reg &= (~(1 << module_power_bit));
++}
+
-+ 1:
-+ beq a0, zero, 1f # delay slot, check hw3 interrupt
-+ nop
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
-+ /* Wheee, combined hardware level zero interrupt. */
-+ jal avalanche_hw0_irqdispatch
-+ move a0, sp # delay slot
++ return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP);
++}
+
-+ j ret_from_irq
-+ nop # delay slot
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
-+ 1:
-+ /*
-+ * Here by mistake? This is possible, what can happen is that by the
-+ * time we take the exception the IRQ pin goes low, so just leave if
-+ * this is the case.
-+ */
-+ move a1,s0
-+ PRINT("Got interrupt: c0_cause = %08x\n")
-+ mfc0 a1, CP0_EPC
-+ PRINT("c0_epc = %08x\n")
-+
-+ j ret_from_irq
-+ nop
-+END(mipsIRQ)
-diff -urN linux-2.4.30/arch/mips/ar7/printf.c linux-2.4.30.dev/arch/mips/ar7/printf.c
---- linux-2.4.30/arch/mips/ar7/printf.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/printf.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,51 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Putting things on the screen/serial line using Adam2 facilities.
-+ */
++ *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK;
++ *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT);
++}
+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/serial_reg.h>
-+#include <linux/spinlock.h>
-+#include <asm/io.h>
-+#include <asm/serial.h>
-+#include <asm/addrspace.h>
-+#include <asm/ar7/ar7.h>
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
-+static char ppbuf[1024];
++ return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK))
++ >> AVALANCHE_GLOBAL_POWER_DOWN_BIT));
++}
+
-+void (*prom_print_str)(unsigned int out, char *s, int len);
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
+
-+void prom_printf(char *fmt, ...) __init;
-+void prom_printf(char *fmt, ...)
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_init
++ ***************************************************************************/
++void avalanche_gpio_init(void)
+{
-+ va_list args;
-+ int len;
-+ prom_print_str = (void *)*(unsigned int *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR;
-+
-+ va_start(args, fmt);
-+ vsprintf(ppbuf, fmt, args);
-+ len = strlen(ppbuf);
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT);
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++}
+
-+ prom_print_str(1, ppbuf, len);
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_ctrl
++ ***************************************************************************/
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++
++ if(pin_mode == GPIO_PIN)
++ {
++ *gpio_ctrl |= (1 << gpio_pin);
++
++ gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR;
++
++ if(pin_direction == GPIO_INPUT_PIN)
++ *gpio_ctrl |= (1 << gpio_pin);
++ else
++ *gpio_ctrl &= ~(1 << gpio_pin);
++ }
++ else /* FUNCTIONAL PIN */
++ {
++ *gpio_ctrl &= ~(1 << gpio_pin);
++ }
++
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return (0);
++}
+
-+ va_end(args);
-+ return;
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out
++ ***************************************************************************/
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ if(value == TRUE)
++ *gpio_out |= 1 << gpio_pin;
++ else
++ *gpio_out &= ~(1 << gpio_pin);
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return(0);
++}
+
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in
++ ***************************************************************************/
++int avalanche_gpio_in_bit(unsigned int gpio_pin)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++ int ret_val = 0;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ ret_val = ((*gpio_in) & (1 << gpio_pin));
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return (ret_val);
+}
-diff -urN linux-2.4.30/arch/mips/ar7/reset.c linux-2.4.30.dev/arch/mips/ar7/reset.c
---- linux-2.4.30/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/reset.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Reset the MIPS boards.
-+ *
-+ */
-+#include <linux/config.h>
+
-+#include <asm/reboot.h>
-+#include <asm/mips-boards/generic.h>
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out_val
++ ***************************************************************************/
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask,
++ unsigned int reg_index)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
+
-+static void ar7_machine_restart(char *command);
-+static void ar7_machine_halt(void);
-+static void ar7_machine_power_off(void);
++ if(reg_index > 0)
++ return(-1);
+
-+static void ar7_machine_restart(char *command)
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *gpio_out &= ~out_mask;
++ *gpio_out |= out_val;
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return(0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in_value
++ ***************************************************************************/
++int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index)
+{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++
++ if(reg_index > 0)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *in_val = *gpio_in;
++ spin_unlock_irqrestore(&closeLock, closeFlag);
+
++ return (0);
+}
+
-+static void ar7_machine_halt(void)
++/***********************************************************************
++ *
++ * Wakeup Control Module for TNETV1050 Communication Processor
++ *
++ ***********************************************************************/
++
++#define AVALANCHE_WAKEUP_POLARITY_BIT 16
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity)
+{
++ volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR;
++
++ /* enable/disable */
++ if (wakeup_ctrl == WAKEUP_ENABLED)
++ /* enable wakeup */
++ *wakeup_status_reg |= wakeup_int;
++ else
++ /* disable wakeup */
++ *wakeup_status_reg &= (~wakeup_int);
++
++ /* set polarity */
++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++ *wakeup_status_reg |= (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++ else
++ *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++}
+
++void avalanche_set_vbus_freq(unsigned int new_vbus_freq)
++{
++ avalanche_vbus_freq = new_vbus_freq;
+}
+
-+static void ar7_machine_power_off(void)
++unsigned int avalanche_get_vbus_freq()
+{
++ return(avalanche_vbus_freq);
++}
+
++unsigned int avalanche_get_chip_version_info()
++{
++ return(*(volatile unsigned int*)AVALANCHE_CVR);
+}
+
-+void ar7_reboot_setup(void)
++SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL;
++
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation)
+{
-+ _machine_restart = ar7_machine_restart;
-+ _machine_halt = ar7_machine_halt;
-+ _machine_power_off = ar7_machine_power_off;
++ if(p_set_mdix_on_chip_fn)
++ return (p_set_mdix_on_chip_fn(base_addr, operation));
++ else
++ return(-1);
++}
++
++unsigned int avalanche_is_mdix_on_chip(void)
++{
++ return(p_set_mdix_on_chip_fn ? 1:0);
+}
-diff -urN linux-2.4.30/arch/mips/ar7/setup.c linux-2.4.30.dev/arch/mips/ar7/setup.c
---- linux-2.4.30/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/setup.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,150 @@
++
++EXPORT_SYMBOL(avalanche_reset_ctrl);
++EXPORT_SYMBOL(avalanche_get_reset_status);
++EXPORT_SYMBOL(avalanche_sys_reset);
++EXPORT_SYMBOL(avalanche_get_sys_last_reset_status);
++EXPORT_SYMBOL(avalanche_power_ctrl);
++EXPORT_SYMBOL(avalanche_get_power_status);
++EXPORT_SYMBOL(avalanche_set_global_power_mode);
++EXPORT_SYMBOL(avalanche_get_global_power_mode);
++EXPORT_SYMBOL(avalanche_set_mdix_on_chip);
++EXPORT_SYMBOL(avalanche_is_mdix_on_chip);
++
++EXPORT_SYMBOL(avalanche_gpio_init);
++EXPORT_SYMBOL(avalanche_gpio_ctrl);
++EXPORT_SYMBOL(avalanche_gpio_out_bit);
++EXPORT_SYMBOL(avalanche_gpio_in_bit);
++EXPORT_SYMBOL(avalanche_gpio_out_value);
++EXPORT_SYMBOL(avalanche_gpio_in_value);
++
++EXPORT_SYMBOL(avalanche_set_vbus_freq);
++EXPORT_SYMBOL(avalanche_get_vbus_freq);
++
++EXPORT_SYMBOL(avalanche_get_chip_version_info);
++
+diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h
+--- linux.old/arch/mips/ar7/platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/platform.h 2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,65 @@
++#ifndef _PLATFORM_H_
++#define _PLATFORM_H_
++
++#include <linux/config.h>
++
++
++/* Important: The definition of ENV_SPACE_SIZE should match with that in
++ * PSPBoot. (/psp_boot/inc/psbl/env.h)
++ */
++#ifdef CONFIG_MIPS_AVALANCHE_TICFG
++#define ENV_SPACE_SIZE (10 * 1024)
++#endif
++
++#ifdef CONFIG_MIPS_TNETV1050SDB
++#define TNETV1050SDB
++#define DUAL_FLASH
++#endif
++
++#ifdef CONFIG_MIPS_AR7DB
++#define TNETD73XX_BOARD
++#define AR7DB
++#endif
++
++#ifdef CONFIG_MIPS_AR7RD
++#define TNETD73XX_BOARD
++#define AR7RD
++#endif
++
++#ifdef CONFIG_AR7WRD
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
++
++#ifdef CONFIG_MIPS_AR7VWI
++#define TNETD73XX_BOARD
++#define AR7VWi
++#endif
++
++/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */
++#ifdef CONFIG_MIPS_AR7VW
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
++
++#ifdef CONFIG_MIPS_AR7WI
++#define TNETD73XX_BOARD
++#define AR7Wi
++#endif
++
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
++
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
++
++#ifdef CONFIG_MIPS_WA1130
++#define AVALANCHE
++#define WLAN
++#endif
++
++#endif
+diff -urN linux.old/arch/mips/ar7/promlib.c linux.dev/arch/mips/ar7/promlib.c
+--- linux.old/arch/mips/ar7/promlib.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/promlib.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,48 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Putting things on the screen/serial line using Adam2 facilities.
+ */
++
++#include <linux/types.h>
++#include <asm/addrspace.h>
++
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR \
++ (AVALANCHE_YAMON_FUNCTION_BASE + 1 * 0x4)
++#define AVALANCHE_YAMON_PROM_EXIT \
++ (AVALANCHE_YAMON_FUNCTION_BASE + 8 * 0x4)
++
++void prom_putchar(char c)
++{
++ static char buf[1];
++ void (*prom_print_str)(unsigned int dummy, char *s, int len) =
++ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR);
++
++ buf[0] = c;
++ prom_print_str(1, buf, 1);
++ return;
++}
++
++void adam2_exit(int retval)
++{
++ void (*yamon_exit)(int retval) =
++ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_EXIT);
++
++ yamon_exit(retval);
++ return;
++}
+diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c
+--- linux.old/arch/mips/ar7/psp_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/psp_env.c 2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,350 @@
+#include <linux/config.h>
+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/ioport.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <asm/io.h>
+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/mips-boards/generic.h>
-+#include <asm/mips-boards/prom.h>
++#include "platform.h"
+
-+#include <asm/dma.h>
-+#include <asm/time.h>
-+#include <asm/traps.h>
++#define ENV_CELL_SIZE 16
+
++/* control field decode */
++#define ENV_GARBAGE_BIT 0x01 /* Env is garbage if this bit is off */
++#define ENV_DYNAMIC_BIT 0x02 /* Env is dynamic if this bit is off */
+
-+#define _LINK_KSEG0_
-+#define LITTLE_ENDIAN
-+#include <asm/ar7/tnetd73xx.h>
-+#include <asm/ar7/tnetd73xx_misc.h>
++#define ENV_CTRL_MASK 0x03
++#define ENV_PREFINED (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT)
++#define ENV_DYNAMIC (ENV_GARBAGE_BIT)
+
-+// Specific for ar7wrd
-+unsigned int tnetd73xx_vbus_freq;
-+#define BOOTCR_MIPS_ASYNC_MODE (1 << 25)
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++struct env_variable {
++ unsigned char varNum;
++ unsigned char ctrl;
++ unsigned short chksum;
++ unsigned char numCells;
++ unsigned char data[ENV_CELL_SIZE - 5]; /* The data section starts
++ * here, continues for
++ * numCells.
++ */
++};
+
-+#if defined(CONFIG_AR7_MARVELL)
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000
-+#else
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2
++extern unsigned int max_env_entry;
++
++/* Internal macros */
++#define get_next_block(var) ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE))
++
++typedef enum ENV_VARS {
++ env_vars_start = 0,
++ CPUFREQ,
++ MEMSZ,
++ FLASHSZ,
++ MODETTY0,
++ MODETTY1,
++ PROMPT,
++ BOOTCFG,
++ HWA_0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ HWA_1,
++#endif
++#if !defined(TNETV1020_BOARD)
++ HWA_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++ HWA_3,
++#endif
++ IPA,
++ IPA_SVR,
++ BLINE_MAC0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ BLINE_MAC1,
++#endif
++#if !defined(TNETV1020_BOARD)
++ BLINE_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++ BLINE_ATM,
++#endif
++#if !defined(TNETV1020_BOARD)
++ USB_PID,
++ USB_VID,
++ USB_EPPOLLI,
++#endif
++ IPA_GATEWAY,
++ SUBNET_MASK,
++#if defined (TNETV1050_BOARD)
++ BLINE_ESWITCH,
++#endif
++#if !defined(TNETV1020_BOARD)
++ USB_SERIAL,
++ HWA_HRNDIS, /* Host (PC) side RNDIS address */
++#endif
++ REMOTE_USER,
++ REMOTE_PASS,
++ REMOTE_DIR,
++ SYSFREQ,
++ LINK_TIMEOUT,
++#ifndef AVALANCHE /* Avalanche boards use only one mac port */
++ MAC_PORT,
++#endif
++ PATH,
++ HOSTNAME,
++#ifdef WLAN
++ HW_REV_MAJOR,
++ HW_REV_MINOR,
++ HW_PATCH,
++ SW_PATCH,
++ SERIAL_NUMBER,
+#endif
++ TFTPCFG,
++#if defined (TNETV1050_BOARD)
++ HWA_ESWITCH,
++#endif
++ /*
++ * Add new env variables here.
++ * NOTE: New environment variables should always be placed at the end, ie
++ * just before env_vars_end.
++ */
+
++ env_vars_end
++} ENV_VARS;
+
-+#ifdef CONFIG_KGDB
-+extern void rs_kgdb_hook(int);
-+int remote_debug = 0;
++
++struct env_description {
++ ENV_VARS idx;
++ char *nm;
++ char *alias;
++};
++
++#define ENVSTR(x) #x
++#define _ENV_ENTRY(x) {.idx = x, .nm = ENVSTR(x), .alias = NULL}
++
++struct env_description env_ns[] = {
++ _ENV_ENTRY(env_vars_start), /* start. */
++ _ENV_ENTRY(CPUFREQ),
++ _ENV_ENTRY(MEMSZ),
++ _ENV_ENTRY(FLASHSZ),
++ _ENV_ENTRY(MODETTY0),
++ _ENV_ENTRY(MODETTY1),
++ _ENV_ENTRY(PROMPT),
++ _ENV_ENTRY(BOOTCFG),
++ _ENV_ENTRY(HWA_0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ _ENV_ENTRY(HWA_1),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(HWA_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++ _ENV_ENTRY(HWA_3),
++#endif
++ _ENV_ENTRY(IPA),
++ _ENV_ENTRY(IPA_SVR),
++ _ENV_ENTRY(IPA_GATEWAY),
++ _ENV_ENTRY(SUBNET_MASK),
++ _ENV_ENTRY(BLINE_MAC0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ _ENV_ENTRY(BLINE_MAC1),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(BLINE_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++ _ENV_ENTRY(BLINE_ATM),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(USB_PID),
++ _ENV_ENTRY(USB_VID),
++ _ENV_ENTRY(USB_EPPOLLI),
++#endif
++#if defined (TNETV1050_BOARD)
++ _ENV_ENTRY(BLINE_ESWITCH),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(USB_SERIAL),
++ _ENV_ENTRY(HWA_HRNDIS),
++#endif
++ _ENV_ENTRY(REMOTE_USER),
++ _ENV_ENTRY(REMOTE_PASS),
++ _ENV_ENTRY(REMOTE_DIR),
++ _ENV_ENTRY(SYSFREQ),
++ _ENV_ENTRY(LINK_TIMEOUT),
++#ifndef AVALANCHE /* Avalanche boards use only one mac port */
++ _ENV_ENTRY(MAC_PORT),
+#endif
++ _ENV_ENTRY(PATH),
++ _ENV_ENTRY(HOSTNAME),
++#ifdef WLAN
++ _ENV_ENTRY(HW_REV_MAJOR),
++ _ENV_ENTRY(HW_REV_MINOR),
++ _ENV_ENTRY(HW_PATCH),
++ _ENV_ENTRY(SW_PATCH),
++ _ENV_ENTRY(SERIAL_NUMBER),
++#endif
++ _ENV_ENTRY(TFTPCFG),
++#if defined (TNETV1050_BOARD)
++ _ENV_ENTRY(HWA_ESWITCH),
++#endif
++ /*
++ * Add new entries below this.
++ */
++ /* Adam2 environment name alias. */
++ { .idx = IPA, .nm = "my_ipaddress" },
++ { .idx = CPUFREQ, .nm = "cpufrequency" },
++ { .idx = SYSFREQ, .nm = "sysfrequency" },
++ { .idx = HWA_0, .nm = "maca" },
++#ifndef AVALANCHE
++ { .idx = HWA_1, .nm = "macb" },
++#endif
++ { .idx = MODETTY0, .nm = "modetty0" },
++ { .idx = MODETTY1, .nm = "modetty1" },
++ { .idx = MEMSZ, .nm = "memsize" },
++
++ _ENV_ENTRY(env_vars_end) /* delimiter. */
++};
+
-+extern struct rtc_ops no_rtc_ops;
++static inline int var_to_idx(const char* var)
++{
++ int ii;
+
-+extern void ar7_reboot_setup(void);
++ /* go over the list of pre-defined environment variables */
++ for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){
++ /* check if the env variable is listed */
++ if (strcmp(env_ns[ii].nm, var) == 0) {
++ return env_ns[ii].idx;
++ }
++
++ /* if an alias is present, check if the alias matches
++ * the description
++ */
++ if (env_ns[ii].alias != NULL) {
++ if (strcmp(env_ns[ii].alias, var) == 0) {
++ return env_ns[ii].idx;
++ }
++ }
++ }
++ return 0;
++}
++
++extern int *_prom_envp;
+
-+extern void ar7_time_init(void);
-+extern void ar7_timer_setup(struct irqaction *irq);
++/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage,
++ * the next read some seconds later is ok. It looks like something is hidding or
++ * overlay the flash address at 0xb0000000. Is this possible?
++ *
++ * The readb() and while() usage below is a attempt of a workarround - with limited success.
++ */
+
-+/* maybe some of this is not needed? */
-+static void ar7_platform_init(void)
++static inline struct env_variable* get_var_by_number(int index)
+{
-+ //tnetd73xx_gpio_init();
++ struct env_variable *env_var = (struct env_variable *)_prom_envp;
++ volatile unsigned char nr;
++ int i;
+
-+ tnetd73xx_reset_ctrl(RESET_MODULE_UART0, OUT_OF_RESET);
-+ //tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET);
-+ //REG32_WRITE(TNETD73XX_GPIOENR, 0xf3fc3ff0);
++ env_var++; /* skip signature */
+
-+ //tnetd73xx_reset_ctrl(RESET_MODULE_EPHY, IN_RESET);
-+ //tnetd73xx_reset_ctrl(RESET_MODULE_EPHY, OUT_OF_RESET);
++ i = 0;
++ nr = readb(&(env_var->varNum));
+
-+ tnetd73xx_clkc_init(AFECLK_FREQ, REFCLK_FREQ, OSC3_FREQ);
++ while (i < max_env_entry && nr != 0xFF) {
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) {
++ if (nr == index) {
++ return env_var;
++ }
++ }
++ i++;
++ env_var = get_next_block(env_var);
++ nr = readb(&(env_var->varNum));
++ }
+
-+ tnetd73xx_vbus_freq = tnetd73xx_clkc_get_freq(CLKC_SYS) / 2;
++ return NULL;
++}
+
-+#if defined(CONFIG_AR7WRD)
-+ if(! (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE)) {
-+ tnetd73xx_clkc_set_freq(CLKC_MIPS, CLK_MHZ(150));
-+ }
-+#endif
++static inline struct env_variable* get_var_by_name(char *var)
++{
++ struct env_variable *env_var = (struct env_variable *)_prom_envp;
++ volatile unsigned char nr;
++ int i;
++
++ env_var++; /* skip signature */
+
++ nr = readb(&(env_var->varNum));
++ i = 0;
++
++ while (i < max_env_entry && nr != 0xFF) {
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++ if (strcmp(var, env_var->data) == 0)
++ return env_var;
++ }
++ i++;
++ env_var = get_next_block(env_var);
++ nr = readb(&(env_var->varNum));
++ }
++ return NULL;
+}
+
-+const char *get_system_type(void)
++static inline struct env_variable* get_var(char *var)
+{
-+ return "Texas Instruments AR7";
++ int index = var_to_idx(var);
++
++ if (index)
++ return get_var_by_number(index);
++ else
++ return get_var_by_name(var);
++
++ return NULL;
+}
+
-+void __init ar7_setup(void)
++static inline char *get_value(struct env_variable* env_var)
+{
-+#ifdef CONFIG_KGDB
-+ int rs_putDebugChar(char);
-+ char rs_getDebugChar(void);
-+ extern int (*generic_putDebugChar)(char);
-+ extern char (*generic_getDebugChar)(void);
-+#endif
-+ char *argptr;
++ unsigned char *name;
++ unsigned char *value;
++ unsigned short chksum;
++ int i;
+
-+#ifdef CONFIG_SERIAL_CONSOLE
-+ argptr = prom_getcmdline();
-+ if ((argptr = strstr(argptr, "console=")) == NULL) {
-+ argptr = prom_getcmdline();
-+ strcat(argptr, " console=ttyS0,38400");
-+ }
-+#endif
++ chksum = env_var->varNum + env_var->ctrl + env_var->numCells;
+
-+#ifdef CONFIG_KGDB
-+ argptr = prom_getcmdline();
-+ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-+ int line;
-+ argptr += strlen("kgdb=ttyS");
-+ if (*argptr != '0' && *argptr != '1')
-+ printk("KGDB: Uknown serial line /dev/ttyS%c, "
-+ "falling back to /dev/ttyS1\n", *argptr);
-+ line = *argptr == '0' ? 0 : 1;
-+ printk("KGDB: Using serial line /dev/ttyS%d for session\n",
-+ line ? 1 : 0);
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++ name = env_var->data;
++ value = env_var->data + strlen(name) + 1;
+
-+ rs_kgdb_hook(line);
-+ generic_putDebugChar = rs_putDebugChar;
-+ generic_getDebugChar = rs_getDebugChar;
++ for(i = 0; i < strlen(name); i++)
++ chksum += name[i];
++ } else
++ value = env_var->data;
+
-+ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, "
-+ "please connect your debugger\n", line ? 1 : 0);
++ for (i = 0; i < strlen(value); i++)
++ chksum += value[i];
+
-+ remote_debug = 1;
-+ /* Breakpoints are in init_IRQ() */
++ chksum += env_var->chksum;
++ chksum = ~(chksum);
++
++ if(chksum != 0) {
++ return NULL;
+ }
-+#endif
+
-+ argptr = prom_getcmdline();
-+ if ((argptr = strstr(argptr, "nofpu")) != NULL)
-+ cpu_data[0].options &= ~MIPS_CPU_FPU;
++ return value;
++}
+
-+ rtc_ops = &no_rtc_ops;
++struct psbl_rec {
++ unsigned int psbl_size;
++ unsigned int env_base;
++ unsigned int env_size;
++ unsigned int ffs_base;
++ unsigned int ffs_size;
++};
+
-+ ar7_platform_init();
++char *prom_psp_getenv(char *envname)
++{
++ struct env_variable* env_var;
++ char *value;
+
-+ ar7_reboot_setup();
++ if (strcmp("bootloader", envname) == 0)
++ return "PSPBoot";
+
-+ board_time_init = ar7_time_init;
-+ board_timer_setup = ar7_timer_setup;
++ if (!(env_var = get_var(envname)))
++ return NULL;
++
++ value = get_value(env_var);
++
++ return value;
+}
-diff -urN linux-2.4.30/arch/mips/ar7/time.c linux-2.4.30.dev/arch/mips/ar7/time.c
---- linux-2.4.30/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/time.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,125 @@
+diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c
+--- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/reset.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,98 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
-+ * Setting up the clock on the MIPS boards.
++ * Reset the AR7 boards.
+ *
+ */
+
-+#include <linux/types.h>
-+#include <linux/config.h>
+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/types.h>
+
+#include <asm/mipsregs.h>
-+#include <asm/ptrace.h>
-+#include <asm/hardirq.h>
-+#include <asm/div64.h>
-+
-+#include <linux/interrupt.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/timex.h>
-+
-+#include <asm/mips-boards/generic.h>
-+#include <asm/mips-boards/prom.h>
-+#include <asm/ar7/ar7.h>
++#include <asm/reboot.h>
++#include <asm/addrspace.h>
+
-+extern asmlinkage void mipsIRQ(void);
++int preserve_adam2 = 1;
+
-+static unsigned long r4k_offset; /* Amount to increment compare reg each time */
-+static unsigned long r4k_cur; /* What counter should be at next timer irq */
++extern void adam2_exit(int retval);
+
-+#define MIPS_CPU_TIMER_IRQ 7
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
++static void ar7_machine_restart(char *command);
++static void ar7_machine_halt(void);
++static void ar7_machine_power_off(void);
+
-+static inline void ack_r4ktimer(unsigned long newval)
++static void ar7_machine_restart(char *command)
+{
-+ write_c0_compare(newval);
++ volatile uint32_t *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4));
++
++ *softres_reg = 1;
+}
+
-+void ar7_timer_interrupt(struct pt_regs *regs)
++static void ar7_machine_halt(void)
+{
-+ int cpu = smp_processor_id();
+
-+ irq_enter(cpu, MIPS_CPU_TIMER_IRQ);
-+
-+ if (r4k_offset == 0)
-+ goto null;
++ if (preserve_adam2) {
++ set_c0_status(ST0_BEV);
++ adam2_exit(0);
++ } else {
++ /* I'd like to have Alt-SysRq-b work in this state.
++ * What's missing here? The timer interrupt is still running.
++ * Why doesn't the UART work anymore? */
++ while(1) {
++ __asm__(".set\tmips3\n\t"
++ "wait\n\t"
++ ".set\tmips0");
++ }
++ }
++}
+
-+ do {
-+ kstat.irqs[cpu][MIPS_CPU_TIMER_IRQ]++;
-+ do_timer(regs);
-+ r4k_cur += r4k_offset;
-+ ack_r4ktimer(r4k_cur);
++static void ar7_machine_power_off(void)
++{
++ volatile uint32_t *power_reg = (void *)(KSEG1ADDR(0x08610A00));
++ uint32_t power_state = *power_reg;
+
-+ } while (((unsigned long)read_c0_count()
-+ - r4k_cur) < 0x7fffffff);
++ /* add something to turn LEDs off? */
+
-+ irq_exit(cpu, MIPS_CPU_TIMER_IRQ);
++ power_state &= ~(3 << 30);
++ power_state |= (3 << 30); /* power down */
++ *power_reg = power_state;
+
-+ if (softirq_pending(cpu))
-+ do_softirq();
++ printk("after power down?\n");
++}
+
-+ return;
++void ar7_reboot_setup(void)
++{
++ _machine_restart = ar7_machine_restart;
++ _machine_halt = ar7_machine_halt;
++ _machine_power_off = ar7_machine_power_off;
++}
+
-+null:
-+ ack_r4ktimer(0);
++static int __init ar7_do_preserve_adam2(char *s)
++{
++ if (!strcmp(s, "no") || !strcmp(s, "0"))
++ preserve_adam2 = 0;
++ else
++ preserve_adam2 = 1;
++ return 1;
+}
+
++__setup("adam2=", ar7_do_preserve_adam2);
+diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c
+--- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/setup.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,143 @@
+/*
-+ * Figure out the r4k offset, the amount to increment the compare
-+ * register for each time tick.
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
-+static unsigned long __init cal_r4koff(void)
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/irq.h>
++
++#include <asm/processor.h>
++#include <asm/irq.h>
++#include <asm/irq_cpu.h>
++#include <asm/time.h>
++#include <asm/mipsregs.h>
++#include <asm/mips-boards/prom.h>
++
++#ifdef CONFIG_KGDB
++extern void rs_kgdb_hook(int);
++extern void breakpoint(void);
++int remote_debug = 0;
++#endif
++
++extern void ar7_reboot_setup(void);
++extern void ar7_irq_init(int);
++extern asmlinkage void ar7IRQ(void);
++
++void ar7_time_init(void)
+{
-+ return ((CONFIG_AR7_FREQUENCY*500000)/HZ);
++ /* XXX runtime */
++ mips_hpt_frequency = CONFIG_AR7_CPU * 500000;
+}
+
-+void __init ar7_time_init(void)
++void ar7_timer_setup(struct irqaction *irq)
+{
-+ unsigned long flags;
-+ unsigned int est_freq;
++ setup_irq(7, irq);
++ set_c0_status(IE_IRQ5);
++}
++
++void __init init_IRQ(void)
++{
++ init_generic_irq();
++ mips_cpu_irq_init(0);
++ ar7_irq_init(8);
+
-+ set_except_vector(0, mipsIRQ);
-+ write_c0_count(0);
++ /* Now safe to set the exception vector. */
++ set_except_vector(0, ar7IRQ);
+
-+ printk("calculating r4koff... ");
-+ r4k_offset = cal_r4koff();
-+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
++#ifdef CONFIG_KGDB
++ if (remote_debug)
++ {
++ set_debug_traps();
++ breakpoint();
++ }
++#endif
++}
+
-+ est_freq = 2*r4k_offset*HZ;
-+ est_freq += 5000; /* round */
-+ est_freq -= est_freq%10000;
-+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-+ (est_freq%1000000)*100/1000000);
++const char *get_system_type(void)
++{
++ return "Texas Instruments AR7";
+}
+
-+void __init ar7_timer_setup(struct irqaction *irq)
++void __init ar7_setup(void)
+{
-+ /* we are using the cpu counter for timer interrupts */
-+ irq->handler = no_action; /* we use our own handler */
-+ setup_irq(MIPS_CPU_TIMER_IRQ, irq);
++#ifdef CONFIG_KGDB
++ int rs_putDebugChar(char);
++ char rs_getDebugChar(void);
++ extern int (*generic_putDebugChar)(char);
++ extern char (*generic_getDebugChar)(void);
++#endif
++ char *argptr;
++#ifdef CONFIG_SERIAL_CONSOLE
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "console=")) == NULL) {
++ char console[20];
++ char *s;
++ int i = 0;
++
++ s = prom_getenv("modetty0");
++ strcpy(console, "38400");
++
++ if (s != NULL) {
++ while (s[i] >= '0' && s[i] <= '9')
++ i++;
++
++ if (i > 0) {
++ strncpy(console, s, i);
++ console[i] = 0;
++ }
++ }
++
++ argptr = prom_getcmdline();
++ strcat(argptr, " console=ttyS0,");
++ strcat(argptr, console);
++ }
++#endif
++
++#ifdef CONFIG_KGDB
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
++ int line;
++ argptr += strlen("kgdb=ttyS");
++ if (*argptr != '0' && *argptr != '1')
++ printk("KGDB: Uknown serial line /dev/ttyS%c, "
++ "falling back to /dev/ttyS1\n", *argptr);
++ line = *argptr == '0' ? 0 : 1;
++ printk("KGDB: Using serial line /dev/ttyS%d for session\n",
++ line ? 1 : 0);
++
++ rs_kgdb_hook(line);
++ generic_putDebugChar = rs_putDebugChar;
++ generic_getDebugChar = rs_getDebugChar;
++
++ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, "
++ "please connect your debugger\n", line ? 1 : 0);
++
++ remote_debug = 1;
++ /* Breakpoints are in init_IRQ() */
++ }
++#endif
++
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "nofpu")) != NULL)
++ cpu_data[0].options &= ~MIPS_CPU_FPU;
++
++ ar7_reboot_setup();
+
-+ r4k_cur = (read_c0_count() + r4k_offset);
-+ write_c0_compare(r4k_cur);
-+ set_c0_status(ALLINTS);
++ board_time_init = ar7_time_init;
++ board_timer_setup = ar7_timer_setup;
+}
-diff -urN linux-2.4.30/arch/mips/ar7/tnetd73xx_misc.c linux-2.4.30.dev/arch/mips/ar7/tnetd73xx_misc.c
---- linux-2.4.30/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,924 @@
+diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c
+--- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,921 @@
+/******************************************************************************
+ * FILE PURPOSE: TNETD73xx Misc modules API Source
+ ******************************************************************************
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
-+#define LITTLE_ENDIAN
-+#define _LINK_KSEG0_
-+
+#include <linux/types.h>
+#include <asm/ar7/tnetd73xx.h>
+#include <asm/ar7/tnetd73xx_misc.h>
+ return ( (pin_value & (1 << gpio_pin)) ? 1 : 0 );
+}
+
-diff -urN linux-2.4.30/arch/mips/config-shared.in linux-2.4.30.dev/arch/mips/config-shared.in
---- linux-2.4.30/arch/mips/config-shared.in 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/config-shared.in 2005-06-14 15:36:59.000000000 +0200
-@@ -20,6 +20,15 @@
+diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
+--- linux.old/arch/mips/config-shared.in 2005-10-21 16:43:18.917114000 +0200
++++ linux.dev/arch/mips/config-shared.in 2005-11-10 01:12:43.950955750 +0100
+@@ -20,6 +20,16 @@
mainmenu_option next_comment
comment 'Machine selection'
dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
+ "AR7DB CONFIG_AR7DB \
+ AR7RD CONFIG_AR7RD \
+ AR7WRD CONFIG_AR7WRD" AR7DB
-+ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_FREQUENCY 150
++ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_CPU 150
++ int 'Texas Instruments AR7 System Frequency' CONFIG_AR7_SYS 125
+ hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000
+fi
dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
-@@ -239,6 +248,11 @@
+@@ -239,6 +249,11 @@
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
fi
+if [ "$CONFIG_AR7" = "y" ]; then
++ define_bool CONFIG_IRQ_CPU y
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_SWAP_IO_SPACE y
-+ define_bool CONFIG_AR7_PAGING y
+fi
if [ "$CONFIG_CASIO_E55" = "y" ]; then
define_bool CONFIG_IRQ_CPU y
define_bool CONFIG_NONCOHERENT_IO y
-@@ -736,6 +750,7 @@
+@@ -736,6 +751,7 @@
mainmenu_option next_comment
comment 'General setup'
if [ "$CONFIG_ACER_PICA_61" = "y" -o \
"$CONFIG_CASIO_E55" = "y" -o \
"$CONFIG_DDB5074" = "y" -o \
"$CONFIG_DDB5476" = "y" -o \
-@@ -797,6 +812,7 @@
+@@ -797,6 +813,7 @@
bool 'Networking support' CONFIG_NET
if [ "$CONFIG_ACER_PICA_61" = "y" -o \
"$CONFIG_CASIO_E55" = "y" -o \
"$CONFIG_DECSTATION" = "y" -o \
"$CONFIG_IBM_WORKPAD" = "y" -o \
-diff -urN linux-2.4.30/arch/mips/kernel/irq.c linux-2.4.30.dev/arch/mips/kernel/irq.c
---- linux-2.4.30/arch/mips/kernel/irq.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/kernel/irq.c 2005-06-14 15:36:59.000000000 +0200
-@@ -76,6 +76,7 @@
- * Generic, controller-independent functions:
- */
+diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S 2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/head.S 2005-11-10 01:10:45.807572250 +0100
+@@ -75,11 +75,11 @@
+ * size!
+ */
+ NESTED(except_vec4, 0, sp)
+- .set push
+- .set noreorder
+-1: j 1b /* Dummy, will be replaced */
+- nop
+- .set pop
++ .set mips2
++ lui k0, 0x9400
++ ori k0, 0x200
++ jr k0
++ nop
+ END(except_vec4)
-+#ifndef CONFIG_AR7
- int get_irq_list(char *buf)
- {
- int i, j;
-@@ -110,6 +111,7 @@
- p += sprintf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
- return p - buf;
- }
-+#endif
+ /*
+diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c
+--- linux.old/arch/mips/kernel/mips_ksyms.c 2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-11-10 01:10:45.811572500 +0100
+@@ -40,6 +40,12 @@
+ extern long __strnlen_user_nocheck_asm(const char *s);
+ extern long __strnlen_user_asm(const char *s);
- #ifdef CONFIG_SMP
- int global_irq_holder = NO_PROC_ID;
-@@ -525,6 +527,7 @@
- *
- */
++#ifdef CONFIG_AR7
++#include <asm/ar7/adam2_env.h>
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value);
++#endif
++
++
+ EXPORT_SYMBOL(mips_machtype);
+ #ifdef CONFIG_EISA
+ EXPORT_SYMBOL(EISA_bus);
+@@ -103,3 +109,10 @@
+ #endif
-+#ifndef CONFIG_AR7
- int request_irq(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long irqflags,
-@@ -569,6 +572,7 @@
- kfree(action);
- return retval;
- }
+ EXPORT_SYMBOL(get_wchan);
++
++#ifdef CONFIG_AR7
++EXPORT_SYMBOL_NOVERS(avalanche_request_pacing);
++EXPORT_SYMBOL_NOVERS(prom_getenv);
++EXPORT_SYMBOL_NOVERS(prom_iterenv);
+#endif
++
+diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
+--- linux.old/arch/mips/kernel/setup.c 2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/setup.c 2005-11-10 01:14:16.376732000 +0100
+@@ -38,6 +38,7 @@
+ #include <asm/io.h>
+ #include <asm/ptrace.h>
+ #include <asm/system.h>
++#include <asm/addrspace.h>
- /**
- * free_irq - free an interrupt
-@@ -588,6 +592,7 @@
- * the machine.
- */
+ struct cpuinfo_mips cpu_data[NR_CPUS];
+ EXPORT_SYMBOL(cpu_data);
+@@ -88,7 +89,7 @@
+ struct boot_mem_map boot_mem_map;
-+#ifndef CONFIG_AR7
- void free_irq(unsigned int irq, void *dev_id)
- {
- irq_desc_t *desc;
-@@ -629,6 +634,7 @@
- return;
- }
- }
-+#endif
+ unsigned char aux_device_present;
+-extern char _ftext, _etext, _fdata, _edata, _end;
++extern char _ftext, _etext, _fdata, _edata, _fbss, _end;
- /*
- * IRQ autodetection code..
-diff -urN linux-2.4.30/arch/mips/kernel/setup.c linux-2.4.30.dev/arch/mips/kernel/setup.c
---- linux-2.4.30/arch/mips/kernel/setup.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/kernel/setup.c 2005-06-14 15:36:59.000000000 +0200
-@@ -109,6 +109,7 @@
- unsigned long isa_slot_offset;
- EXPORT_SYMBOL(isa_slot_offset);
+ static char command_line[CL_SIZE];
+ char saved_command_line[CL_SIZE];
+@@ -116,6 +117,7 @@
-+extern void avalanche_bootmem_init(void);
- extern void SetUpBootInfo(void);
- extern void load_mmu(void);
- extern asmlinkage void start_kernel(void);
-@@ -267,6 +268,9 @@
- #endif /* CONFIG_BLK_DEV_INITRD */
+ static struct resource code_resource = { "Kernel code" };
+ static struct resource data_resource = { "Kernel data" };
++static struct resource bss_resource = { "Kernel bss" };
- /* Find the highest page frame number we have available. */
-+#ifdef CONFIG_AR7_PAGING
-+ avalanche_bootmem_init();
-+#else
- max_pfn = 0;
- first_usable_pfn = -1UL;
+ asmlinkage void __init
+ init_arch(int argc, char **argv, char **envp, int *prom_vec)
+@@ -272,7 +274,7 @@
for (i = 0; i < boot_mem_map.nr_map; i++) {
-@@ -376,7 +380,7 @@
+ unsigned long start, end;
+
+- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ continue;
+
+ start = PFN_UP(boot_mem_map.map[i].addr);
+@@ -320,7 +322,8 @@
+ #endif
+
+ /* Initialize the boot-time allocator with low memory only. */
+- bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
++ bootmap_size = init_bootmem_node(NODE_DATA(0), first_usable_pfn,
++ PFN_UP(PHYS_OFFSET), max_low_pfn);
+
+ /*
+ * Register fully available low RAM pages with the bootmem allocator.
+@@ -371,11 +374,12 @@
+ continue;
+
+ /* Register lowmem ranges */
+- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
++ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
++ size<<PAGE_SHIFT);
+ }
/* Reserve the bootmap memory. */
- reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
--
-+#endif
+- reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
++ reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_usable_pfn), bootmap_size);
+
#ifdef CONFIG_BLK_DEV_INITRD
/* Board specific code should have set up initrd_start and initrd_end */
- ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
-@@ -494,6 +498,7 @@
+@@ -409,6 +413,8 @@
+ code_resource.end = virt_to_bus(&_etext) - 1;
+ data_resource.start = virt_to_bus(&_fdata);
+ data_resource.end = virt_to_bus(&_edata) - 1;
++ bss_resource.start = virt_to_bus(&_fbss);
++ bss_resource.end = virt_to_bus(&_end) - 1;
+
+ /*
+ * Request address space for all standard RAM.
+@@ -448,6 +454,7 @@
+ */
+ request_resource(res, &code_resource);
+ request_resource(res, &data_resource);
++ request_resource(res, &bss_resource);
+ }
+ }
+
+@@ -494,6 +501,7 @@
void hp_setup(void);
void au1x00_setup(void);
void frame_info_init(void);
frame_info_init();
#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
-@@ -691,6 +696,11 @@
+@@ -691,6 +699,11 @@
pmc_yosemite_setup();
break;
#endif
default:
panic("Unsupported architecture");
}
-diff -urN linux-2.4.30/arch/mips/kernel/traps.c linux-2.4.30.dev/arch/mips/kernel/traps.c
---- linux-2.4.30/arch/mips/kernel/traps.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/kernel/traps.c 2005-06-14 15:36:59.000000000 +0200
-@@ -40,6 +40,10 @@
- #include <asm/uaccess.h>
- #include <asm/mmu_context.h>
+diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
+--- linux.old/arch/mips/kernel/time.c 2005-01-19 15:09:29.000000000 +0100
++++ linux.dev/arch/mips/kernel/time.c 2005-11-10 01:12:43.950955750 +0100
+@@ -143,7 +143,6 @@
+ expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
+ write_c0_count(expirelo - cycles_per_jiffy);
+ write_c0_compare(expirelo);
+- write_c0_count(count);
+ }
-+#ifdef CONFIG_AR7
-+#include <asm/ar7/ar7.h>
-+#endif
-+
- extern asmlinkage void handle_mod(void);
- extern asmlinkage void handle_tlbl(void);
- extern asmlinkage void handle_tlbs(void);
-@@ -869,9 +873,15 @@
+ int (*mips_timer_state)(void);
+diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
+--- linux.old/arch/mips/kernel/traps.c 2005-10-21 16:43:16.400956750 +0200
++++ linux.dev/arch/mips/kernel/traps.c 2005-11-10 01:13:28.301727500 +0100
+@@ -869,9 +869,24 @@
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
-+#ifdef CONFIG_AR7
-+ *(volatile u32 *)(AVALANCHE_VECS_KSEG0+0x200) = 0x08000000 |
-+ (0x03ffffff & (handler >> 2));
-+ flush_icache_range(AVALANCHE_VECS_KSEG0+0x200, AVALANCHE_VECS_KSEG0 + 0x204);
-+#else
++ printk(KERN_DEBUG "%s: using long jump via k0 to reach %08x\n",
++ __FUNCTION__, handler);
++ /* where does the 8 byte limit mentioned in head.S come from??? */
++ if (handler > 0x0fffffff) { /* maximum for single J instruction */
++ /* lui k0, 0x0000 */
++ *(volatile u32 *)(KSEG0+0x200) = 0x3c1a0000 | (handler >> 16);
++ /* ori k0, 0x0000 */
++ *(volatile u32 *)(KSEG0+0x204) = 0x375a0000 | (handler & 0xffff);
++ /* jr k0 */
++ *(volatile u32 *)(KSEG0+0x208) = 0x03400008;
++ /* nop */
++ *(volatile u32 *)(KSEG0+0x20C) = 0x00000000;
++ flush_icache_range(KSEG0+0x200, KSEG0+0x210);
++ } else {
*(volatile u32 *)(KSEG0+0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
-+#endif
+- flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
++ flush_icache_range(KSEG0+0x200, KSEG0+0x204);
++ }
}
return (void *)old_handler;
}
-@@ -920,14 +930,46 @@
- void __init trap_init(void)
- {
- extern char except_vec1_generic;
-+ extern char except_vec2_generic;
- extern char except_vec3_generic, except_vec3_r4000;
- extern char except_vec_ejtag_debug;
- extern char except_vec4;
- unsigned long i;
-
-+#ifdef CONFIG_AR7
-+ extern char jump_tlb_miss, jump_tlb_miss_unused;
-+ extern char jump_cache_error,jump_general_exception;
-+ extern char jump_dedicated_interrupt;
-+ clear_c0_status(ST0_BEV);
-+#endif
-+
- /* Copy the generic exception handler code to it's final destination. */
- memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
-+ memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
+diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c
+--- linux.old/arch/mips/mm/init.c 2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/mm/init.c 2005-11-10 01:14:16.376732000 +0100
+@@ -235,10 +235,13 @@
+ #endif
+ }
-+ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80);
-+ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80);
-+ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80);
-+ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80);
++#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
++#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
+
-+#ifdef CONFIG_AR7
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x100), &except_vec2_generic, 0x80);
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x180), &except_vec3_generic, 0x80);
-+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x200);
-+
-+ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80);
-+ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80);
-+ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80);
-+ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80);
-+#else
-+ memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+#endif
-+ flush_icache_range(KSEG0 + 0x80, KSEG0 + 0x200);
-+
- /*
- * Setup default vectors
- */
-@@ -951,8 +993,12 @@
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
- */
-+#ifdef CONFIG_AR7
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x200), &except_vec4, 8);
-+#else
- if (cpu_has_divec)
- memcpy((void *)(KSEG0 + 0x200), &except_vec4, 8);
-+#endif
-
- /*
- * Some CPUs can enable/disable for cache parity detection, but does
-@@ -991,12 +1037,17 @@
- if (cpu_has_mcheck)
- set_except_vector(24, handle_mcheck);
-
-+memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
-+#ifdef CONFIG_AR7
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x180), &except_vec3_generic, 0x80);
-+#else
- if (cpu_has_vce)
- memcpy((void *)(KSEG0 + 0x180), &except_vec3_r4000, 0x80);
- else if (cpu_has_4kex)
- memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
- else
- memcpy((void *)(KSEG0 + 0x080), &except_vec3_generic, 0x80);
-+#endif
-
- if (current_cpu_data.cputype == CPU_R6000 ||
- current_cpu_data.cputype == CPU_R6000A) {
-@@ -1023,7 +1074,11 @@
- if (board_nmi_handler_setup)
- board_nmi_handler_setup();
-
-+#ifdef CONFIG_AR7
-+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x200);
-+#else
- flush_icache_range(KSEG0, KSEG0 + 0x400);
-+#endif
+ void __init paging_init(void)
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+- unsigned long max_dma, high, low;
++ unsigned long max_dma, high, low, start;
- per_cpu_trap_init();
- }
-diff -urN linux-2.4.30/arch/mips/lib/promlib.c linux-2.4.30.dev/arch/mips/lib/promlib.c
---- linux-2.4.30/arch/mips/lib/promlib.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/lib/promlib.c 2005-06-14 15:36:59.000000000 +0200
-@@ -1,3 +1,4 @@
-+#ifndef CONFIG_AR7
- #include <stdarg.h>
- #include <linux/kernel.h>
+ pagetable_init();
-@@ -22,3 +23,4 @@
- }
- va_end(args);
- }
-+#endif
-diff -urN linux-2.4.30/arch/mips/mm/init.c linux-2.4.30.dev/arch/mips/mm/init.c
---- linux-2.4.30/arch/mips/mm/init.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/mm/init.c 2005-06-14 15:36:59.000000000 +0200
-@@ -40,8 +40,10 @@
+@@ -247,7 +250,8 @@
+ #endif
- mmu_gather_t mmu_gathers[NR_CPUS];
- unsigned long highstart_pfn, highend_pfn;
-+#ifndef CONFIG_AR7_PAGING
- static unsigned long totalram_pages;
- static unsigned long totalhigh_pages;
-+#endif
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+- low = max_low_pfn;
++ start = START_PFN;
++ low = MAX_LOW_PFN - start;
+ high = highend_pfn;
- void pgd_init(unsigned long page)
- {
-@@ -235,6 +237,7 @@
+ #ifdef CONFIG_ISA
+@@ -270,7 +274,8 @@
+ zones_size[ZONE_HIGHMEM] = high - low;
#endif
- }
-
-+#ifndef CONFIG_AR7_PAGING
- void __init paging_init(void)
- {
- unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
-@@ -272,6 +275,7 @@
- free_area_init(zones_size);
+- free_area_init(zones_size);
++ free_area_init_node(0, NODE_DATA(0), 0, zones_size,
++ start << PAGE_SHIFT, 0);
}
-+#endif
#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
- #define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-@@ -298,6 +302,7 @@
- return 0;
- }
+@@ -283,7 +288,7 @@
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ unsigned long addr, end;
-+#ifndef CONFIG_AR7_PAGING
- void __init mem_init(void)
- {
- unsigned long codesize, reservedpages, datasize, initsize;
-@@ -359,6 +364,7 @@
- initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
- }
-+#endif
+- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ /* not usable memory */
+ continue;
- #ifdef CONFIG_BLK_DEV_INITRD
- void free_initrd_mem(unsigned long start, unsigned long end)
-@@ -376,6 +382,7 @@
- }
+@@ -313,16 +318,17 @@
+ max_mapnr = num_physpages = highend_pfn;
+ num_mappedpages = max_low_pfn;
+ #else
+- max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
++ max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN;
+ #endif
+- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+-
+- totalram_pages += free_all_bootmem();
++
++ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
++
++ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
+ totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */
+
+ reservedpages = ram = 0;
+- for (tmp = 0; tmp < max_low_pfn; tmp++)
+- if (page_is_ram(tmp)) {
++ for (tmp = 0; tmp < max_mapnr; tmp++)
++ if (page_is_ram(START_PFN + tmp)) {
+ ram++;
+ if (PageReserved(mem_map+tmp))
+ reservedpages++;
+@@ -377,13 +383,13 @@
#endif
-+#ifndef CONFIG_AR7_PAGING
extern char __init_begin, __init_end;
- extern void prom_free_prom_memory(void) __init;
+-extern void prom_free_prom_memory(void) __init;
++extern unsigned long prom_free_prom_memory(void) __init;
-@@ -383,7 +390,9 @@
+ void free_initmem(void)
{
unsigned long addr;
-+#ifndef CONFIG_AR7
- prom_free_prom_memory ();
-+#endif
+- prom_free_prom_memory ();
++ totalram_pages += prom_free_prom_memory ();
addr = (unsigned long) &__init_begin;
while (addr < (unsigned long) &__init_end) {
-@@ -409,3 +418,4 @@
+diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in
+--- linux.old/drivers/char/Config.in 2005-10-21 16:43:16.440959250 +0200
++++ linux.dev/drivers/char/Config.in 2005-11-10 01:10:45.843574500 +0100
+@@ -188,6 +188,14 @@
+ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
+ fi
- return;
- }
-+#endif
-diff -urN linux-2.4.30/arch/mips/mm/tlb-r4k.c linux-2.4.30.dev/arch/mips/mm/tlb-r4k.c
---- linux-2.4.30/arch/mips/mm/tlb-r4k.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/arch/mips/mm/tlb-r4k.c 2005-06-14 15:36:59.000000000 +0200
-@@ -20,6 +20,10 @@
- #include <asm/pgtable.h>
- #include <asm/system.h>
++if [ "$CONFIG_AR7" = "y" ]; then
++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++
++ define_int CONFIG_AR7_VLYNQ_PORTS 2
++ tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2
++fi
++
+ source drivers/i2c/Config.in
-+#ifdef CONFIG_AR7
-+#include <asm/ar7/ar7.h>
-+#endif
+ mainmenu_option next_comment
+diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig
+--- linux.old/drivers/char/Config.in.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Config.in.orig 2005-11-10 01:10:45.863575750 +0100
+@@ -0,0 +1,414 @@
++#
++# Character device configuration
++#
++mainmenu_option next_comment
++comment 'Character devices'
++
++bool 'Virtual terminal' CONFIG_VT
++if [ "$CONFIG_VT" = "y" ]; then
++ bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE
++ if [ "$CONFIG_GSC_LASI" = "y" ]; then
++ bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2
++ fi
++fi
++tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
++if [ "$CONFIG_SERIAL" = "y" ]; then
++ bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE
++ if [ "$CONFIG_GSC_LASI" = "y" ]; then
++ bool ' serial port on GSC support' CONFIG_SERIAL_GSC
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP
++ fi
++ if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
++ tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL
++ tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL
++ fi
++fi
++dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL
++if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
++ bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
++ bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
++ bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
++ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT
++ bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
++fi
++bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
++if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
++ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
++ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT
++ tristate ' Cyclades async mux support' CONFIG_CYCLADES
++ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
++ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
++ fi
++ if [ "$CONFIG_X86_64" != "y" ]; then
++ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
++ if [ "$CONFIG_DIGIEPCA" = "n" ]; then
++ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
++ fi
++ fi
++ dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA
++ tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO
++ tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO
++ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
++ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
++ fi
++ tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK
++ tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP
++ tristate ' HDLC line discipline support' CONFIG_N_HDLC
++ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8
++ if [ "$CONFIG_X86_64" != "y" ]; then
++ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX
++ if [ "$CONFIG_SPECIALIX" != "n" ]; then
++ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
++ fi
++ tristate ' Specialix SX (and SI) card support' CONFIG_SX
++ tristate ' Specialix RIO system support' CONFIG_RIO
++ if [ "$CONFIG_RIO" != "n" ]; then
++ bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
++ fi
++ fi
++ bool ' Stallion multiport serial support' CONFIG_STALDRV
++ if [ "$CONFIG_STALDRV" = "y" ]; then
++ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
++ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
++ fi
++ if [ "$CONFIG_PARISC" = "y" ]; then
++ if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then
++ bool ' Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD
++ fi
++ if [ "$CONFIG_SERIAL_MUX" != "y" ]; then
++ bool ' PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD
++ fi
++ fi
++ if [ "$CONFIG_MIPS" = "y" ]; then
++ bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
++ dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
++ bool ' TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9
++ dep_bool ' Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9
++ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++ bool ' Enable Au1x00 UART Support' CONFIG_AU1X00_UART
++ if [ "$CONFIG_AU1X00_UART" = "y" ]; then
++ bool ' Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE
++ fi
++ dep_tristate ' Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00
++ if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then
++ dep_tristate ' Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00
++ fi
++ if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \
++ "$CONFIG_AU1X00_USB_RAW" != "n" ]; then
++ define_bool CONFIG_AU1X00_USB_DEVICE y
++ fi
++ fi
++ bool ' TXx927 SIO support' CONFIG_TXX927_SERIAL
++ if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then
++ bool ' TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE
++ fi
++ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
++ bool ' Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART
++ if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then
++ bool ' Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE
++ if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then
++ define_bool CONFIG_SERIAL_CONSOLE y
++ fi
++ fi
++ fi
++ fi
++ if [ "$CONFIG_DECSTATION" = "y" ]; then
++ bool ' DECstation serial support' CONFIG_SERIAL_DEC
++ dep_bool ' Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC
++ dep_bool ' DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32
++ dep_bool ' Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC
++ fi
++ if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ bool ' SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL
++ if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then
++ bool ' SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE
++ fi
++ if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then
++ bool ' SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL
++ fi
++ fi
++fi
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
++ tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
++fi
++if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++ bool 'DC21285 serial port support' CONFIG_SERIAL_21285
++ if [ "$CONFIG_SERIAL_21285" = "y" ]; then
++ if [ "$CONFIG_OBSOLETE" = "y" ]; then
++ bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
++ fi
++ bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
++ fi
++ if [ "$CONFIG_PARISC" = "y" ]; then
++ bool ' PDC software console support' CONFIG_PDC_CONSOLE
++ fi
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++ define_bool CONFIG_IT8172_CIR y
++ else
++ bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB
++ fi
++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++ bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
++fi
++if [ "$CONFIG_MIPS_IVR" = "y" ]; then
++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++ define_bool CONFIG_IT8172_CIR y
++ fi
++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++fi
++if [ "$CONFIG_CPU_VR41XX" = "y" ]; then
++ bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU
++fi
++bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
++if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
++ int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
++fi
++if [ "$CONFIG_PARPORT" != "n" ]; then
++ dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
++ if [ "$CONFIG_PRINTER" != "n" ]; then
++ bool ' Support for console on line printer' CONFIG_LP_CONSOLE
++ fi
++ dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
++ dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT
++fi
+
- extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600;
-
- /* CP0 hazard avoidance. */
-@@ -375,7 +379,12 @@
- else if (current_cpu_data.cputype == CPU_R4600)
- memcpy((void *)KSEG0, &except_vec0_r4600, 0x80);
- else
-+#ifdef CONFIG_AR7
-+ memcpy((void *)AVALANCHE_VECS_KSEG0, &except_vec0_r4000, 0x80);
-+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x80);
-+#else
- memcpy((void *)KSEG0, &except_vec0_r4000, 0x80);
- flush_icache_range(KSEG0, KSEG0 + 0x80);
-+#endif
- }
- }
-diff -urN linux-2.4.30/drivers/char/serial.c linux-2.4.30.dev/drivers/char/serial.c
---- linux-2.4.30/drivers/char/serial.c 2005-06-14 18:42:06.000000000 +0200
-+++ linux-2.4.30.dev/drivers/char/serial.c 2005-06-14 15:36:59.000000000 +0200
-@@ -419,7 +419,40 @@
- return 0;
- }
-
--#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-+#if defined(CONFIG_AR7)
++if [ "$CONFIG_PPC64" = "y" ] ; then
++ bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE
++fi
++if [ "$CONFIG_ALL_PPC" = "y" ]; then
++ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
++fi
+
-+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
-+{
-+ return (inb(info->port + (offset * 4)) & 0xff);
-+}
++if [ "$CONFIG_AR7" = "y" ]; then
++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++
++ define_int CONFIG_AR7_VLYNQ_PORTS 2
++fi
++
++source drivers/i2c/Config.in
++
++mainmenu_option next_comment
++comment 'Mice'
++tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
++if [ "$CONFIG_BUSMOUSE" != "n" ]; then
++ dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
++ dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
++ dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
++ if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
++ dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
++ fi
++# if [ "$CONFIG_DECSTATION" = "y" ]; then
++# dep_bool ' MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
++# fi
++fi
+
++tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
++if [ "$CONFIG_MOUSE" != "n" ]; then
++ bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
++ tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
++ tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD
++ tristate ' MK712 touch screen support' CONFIG_MK712_MOUSE
++fi
++endmenu
++
++source drivers/char/joystick/Config.in
++
++tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
++if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
++ bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
++ if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
++ comment ' Edit configuration parameters in ./include/linux/tpqic02.h!'
++ else
++ comment ' Setting runtime QIC-02 configuration is done with qic02conf'
++ comment ' from the tpqic02-support package. It is available at'
++ comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
++ fi
++fi
+
-+static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
-+{
-+#ifdef CONFIG_SERIAL_NOPAUSE_IO
-+ return (inb(info->port + (offset * 4)) & 0xff);
-+#else
-+ return (inb_p(info->port + (offset * 4)) & 0xff);
-+#endif
-+}
++tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
++dep_mbool ' Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
++dep_tristate ' Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
++dep_tristate ' IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
++dep_tristate ' IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER
++
++mainmenu_option next_comment
++comment 'Watchdog Cards'
++bool 'Watchdog Timer Support' CONFIG_WATCHDOG
++if [ "$CONFIG_WATCHDOG" != "n" ]; then
++ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
++ tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
++ tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
++ tristate ' ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
++ tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
++ tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
++ tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
++ if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++ tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG
++ if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++ tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG
++ fi
++ fi
++ tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
++ tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
++ tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
++ tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
++ tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD
++ tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
++ dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
++ tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
++ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG
++ tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
++ tristate ' WDT Watchdog timer' CONFIG_WDT
++ tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI
++ if [ "$CONFIG_WDT" != "n" ]; then
++ bool ' WDT501 features' CONFIG_WDT_501
++ if [ "$CONFIG_WDT_501" = "y" ]; then
++ bool ' Fan Tachometer' CONFIG_WDT_501_FAN
++ fi
++ fi
++ tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++ if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
++ fi
++ if [ "$CONFIG_8xx" = "y" ]; then
++ tristate ' MPC8xx Watchdog Timer' CONFIG_8xx_WDT
++ fi
++fi
++endmenu
++
++if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++ tristate 'NetWinder thermometer support' CONFIG_DS1620
++ tristate 'NetWinder Button' CONFIG_NWBUTTON
++ if [ "$CONFIG_NWBUTTON" != "n" ]; then
++ bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT
++ fi
++ tristate 'NetWinder flash support' CONFIG_NWFLASH
++fi
++tristate 'NatSemi SCx200 Support' CONFIG_SCx200
++dep_tristate ' NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200
+
-+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
-+{
-+ outb(value, info->port + (offset * 4));
-+}
++if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
++ bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
++fi
++
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
++ dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
++ dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
++ "$CONFIG_X86_64" = "y" ]; then
++ dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
++fi
++dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
++tristate '/dev/nvram support' CONFIG_NVRAM
++tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
++if [ "$CONFIG_IA64" = "y" ]; then
++ bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
++fi
++if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
++ bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8
++fi
++if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
++fi
++if [ "$CONFIG_SGI_IP27" = "y" ]; then
++ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
++fi
++if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
++ tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
++fi
+
++tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
++tristate 'Siemens R3964 line discipline' CONFIG_R3964
++tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
++ dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
++fi
+
-+static _INLINE_ void serial_outp(struct async_struct *info, int offset,
-+ int value)
-+{
-+#ifdef CONFIG_SERIAL_NOPAUSE_IO
-+ outb(value, info->port + (offset * 4));
-+#else
-+ outb_p(value, info->port + (offset * 4));
-+#endif
-+}
++mainmenu_option next_comment
++comment 'Ftape, the floppy tape device driver'
++tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
++if [ "$CONFIG_FTAPE" != "n" ]; then
++ source drivers/char/ftape/Config.in
++fi
+
-+#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-
- #include <asm/mips-boards/atlas.h>
++endmenu
++
++if [ "$CONFIG_GART_IOMMU" = "y" ]; then
++ bool '/dev/agpgart (AGP Support)' CONFIG_AGP
++ define_bool CONFIG_AGP_AMD_K8 y
++else
++ tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
++fi
++if [ "$CONFIG_AGP" != "n" ]; then
++ bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
++ bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
++ bool ' VIA chipset support' CONFIG_AGP_VIA
++ bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
++ if [ "$CONFIG_GART_IOMMU" != "y" ]; then
++ bool ' AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
++ fi
++ bool ' Generic SiS support' CONFIG_AGP_SIS
++ bool ' ALI chipset support' CONFIG_AGP_ALI
++ bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS
++ if [ "$CONFIG_X86" = "y" ]; then
++ bool ' NVIDIA chipset support' CONFIG_AGP_NVIDIA
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' Intel 460GX support' CONFIG_AGP_I460
++ bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
++ fi
++ bool ' ATI IGP chipset support' CONFIG_AGP_ATI
++fi
++
++mainmenu_option next_comment
++comment 'Direct Rendering Manager (XFree86 DRI support)'
++bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
++if [ "$CONFIG_DRM" = "y" ]; then
++ bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
++ if [ "$CONFIG_DRM_OLD" = "y" ]; then
++ comment 'DRM 4.0 drivers'
++ source drivers/char/drm-4.0/Config.in
++ else
++ comment 'DRM 4.1 drivers'
++ define_bool CONFIG_DRM_NEW y
++ source drivers/char/drm/Config.in
++ fi
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++fi
++
++endmenu
++
++if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
++ source drivers/char/pcmcia/Config.in
++fi
++if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++ tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
++ tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
++ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++ tristate ' ITE GPIO' CONFIG_ITE_GPIO
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++ dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
++fi
++
++endmenu
+diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile
+--- linux.old/drivers/char/Makefile 2005-10-21 16:43:16.460960500 +0200
++++ linux.dev/drivers/char/Makefile 2005-11-10 01:10:45.871576250 +0100
+@@ -240,6 +240,13 @@
+ obj-y += joystick/js.o
+ endif
-@@ -478,8 +511,10 @@
- * needed for certain old 386 machines, I've left these #define's
- * in....
- */
-+#ifdef CONFIG_AR7
- #define serial_inp(info, offset) serial_in(info, offset)
- #define serial_outp(info, offset, value) serial_out(info, offset, value)
-+#endif
++#
++# Texas Intruments VLYNQ driver
++#
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o
++
+ obj-$(CONFIG_FETCHOP) += fetchop.o
+ obj-$(CONFIG_BUSMOUSE) += busmouse.o
+ obj-$(CONFIG_DTLK) += dtlk.o
+@@ -340,6 +347,11 @@
+ obj-y += ipmi/ipmi.o
+ endif
++subdir-$(CONFIG_AR7_ADAM2) += ticfg
++ifeq ($(CONFIG_AR7_ADAM2),y)
++ obj-y += ticfg/ticfg.o
++endif
++
+ include $(TOPDIR)/Rules.make
- /*
-@@ -1728,7 +1763,15 @@
- /* Special case since 134 is really 134.5 */
- quot = (2*baud_base / 269);
- else if (baud)
-+#ifdef CONFIG_AR7
-+ quot = get_avalanche_vbus_freq() / baud;
+ fastdep:
+diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig
+--- linux.old/drivers/char/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Makefile.orig 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,374 @@
++#
++# Makefile for the kernel character device drivers.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now inherited from the
++# parent makes..
++#
+
-+ if ((quot%16)>7)
-+ quot += 8;
-+ quot /=16;
-+#else
- quot = baud_base / baud;
-+#endif
- }
- /* If the quotient is zero refuse the change */
- if (!quot && old_termios) {
-@@ -5552,8 +5595,10 @@
- state->irq = irq_cannonicalize(state->irq);
- if (state->hub6)
- state->io_type = SERIAL_IO_HUB6;
-+#ifdef CONFIG_AR7
- if (state->port && check_region(state->port,8))
- continue;
-+#endif
- #ifdef CONFIG_MCA
- if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
- continue;
-@@ -6009,7 +6054,15 @@
- info->io_type = state->io_type;
- info->iomem_base = state->iomem_base;
- info->iomem_reg_shift = state->iomem_reg_shift;
-+#ifdef CONFIG_AR7
-+ quot = get_avalanche_vbus_freq() / baud;
++#
++# This file contains the font map for the default (hardware) font
++#
++FONTMAPFILE = cp437.uni
+
-+ if ((quot%16)>7)
-+ quot += 8;
-+ quot /=16;
-+#else
- quot = state->baud_base / baud;
-+#endif
- cval = cflag & (CSIZE | CSTOPB);
- #if defined(__powerpc__) || defined(__alpha__)
- cval >>= 8;
-diff -urN linux-2.4.30/include/asm-mips/ar7/ar7.h linux-2.4.30.dev/include/asm-mips/ar7/ar7.h
---- linux-2.4.30/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/ar7.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,137 @@
-+#ifndef _MIPS_AR7_H
-+#define _MIPS_AR7_H
++O_TARGET := char.o
+
-+#include <linux/config.h>
-+#include <asm/addrspace.h>
++obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
+
++# All of the (potential) objects that export symbols.
++# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
+
-+#ifndef LITTLE_ENDIAN
-+#define LITTLE_ENDIAN
-+#endif
++export-objs := busmouse.o console.o keyboard.o sysrq.o \
++ misc.o pty.o random.o selection.o serial.o \
++ sonypi.o tty_io.o tty_ioctl.o generic_serial.o \
++ au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \
++ scx200.o fetchop.o
+
-+#ifndef _LINK_KSEG0_
-+#define _LINK_KSEG0_
-+#endif
++mod-subdirs := joystick ftape drm drm-4.0 pcmcia
+
-+#include <asm/ar7/tnetd73xx.h>
++list-multi :=
+
-+#define AVALANCHE_UART0_INT 7
-+#define AVALANCHE_UART1_INT 8
++KEYMAP =defkeymap.o
++KEYBD =pc_keyb.o
++CONSOLE =console.o
++SERIAL =serial.o
+
-+#define MIPS_EXCEPTION_OFFSET 8
-+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++ifeq ($(ARCH),s390)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ SERIAL =
++endif
+
-+/*
-+ * AR7 board SDRAM base address. This is used to setup the
-+ * bootmem tables
-+ */
++ifeq ($(ARCH),mips)
++ ifneq ($(CONFIG_PC_KEYB),y)
++ KEYBD =
++ endif
++ ifeq ($(CONFIG_VR41XX_KIU),y)
++ ifeq ($(CONFIG_IBM_WORKPAD),y)
++ KEYMAP = ibm_workpad_keymap.o
++ endif
++ ifeq ($(CONFIG_VICTOR_MPC30X),y)
++ KEYMAP = victor_mpc30x_keymap.o
++ endif
++ KEYBD = vr41xx_keyb.o
++ endif
++endif
+
-+#define AVALANCHE_SDRAM_BASE CONFIG_AR7_MEMORY//0x14000000UL
-+#define AVALANCHE_INTC_BASE TNETD73XX_INTC_BASE
++ifeq ($(ARCH),s390x)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ SERIAL =
++endif
+
++ifeq ($(ARCH),m68k)
++ ifdef CONFIG_AMIGA
++ KEYBD = amikeyb.o
++ else
++ ifndef CONFIG_MAC
++ KEYBD =
++ endif
++ endif
++ SERIAL =
++endif
+
-+/*
-+ * AR7 board vectors
-+ */
++ifeq ($(ARCH),parisc)
++ ifdef CONFIG_GSC_PS2
++ KEYBD = hp_psaux.o hp_keyb.o
++ else
++ KEYBD =
++ endif
++ ifdef CONFIG_SERIAL_MUX
++ CONSOLE += mux.o
++ endif
++ ifdef CONFIG_PDC_CONSOLE
++ CONSOLE += pdc_console.o
++ endif
++endif
+
-+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
++ifdef CONFIG_Q40
++ KEYBD += q40_keyb.o
++ SERIAL = serial.o
++endif
+
++ifdef CONFIG_APOLLO
++ KEYBD += dn_keyb.o
++endif
+
-+/*
-+ * Yamon Prom print address.
-+ */
-+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
-+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++ifeq ($(ARCH),parisc)
++ ifdef CONFIG_GSC_PS2
++ KEYBD = hp_psaux.o hp_keyb.o
++ else
++ KEYBD =
++ endif
++ ifdef CONFIG_PDC_CONSOLE
++ CONSOLE += pdc_console.o
++ endif
++endif
+
-+/*
-+ * AR7 Reset and PSU standby register.
-+ */
-+#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */
-+#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */
-+#define AVALANCHE_GORESET 0x1
-+#define AVALANCHE_GOSTBY 0x1
-+#define AVALANCHE_SWRCR (*(unsigned int *)TNETD73XX_RST_CTRL_SWRCR)
++ifeq ($(ARCH),arm)
++ ifneq ($(CONFIG_PC_KEYMAP),y)
++ KEYMAP =
++ endif
++ ifneq ($(CONFIG_PC_KEYB),y)
++ KEYBD =
++ endif
++endif
+
-+/*
-+ * Avalanche UART register base.
-+ */
++ifeq ($(ARCH),sh)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ ifeq ($(CONFIG_SH_HP600),y)
++ KEYMAP = defkeymap.o
++ KEYBD = scan_keyb.o hp600_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_DMIDA),y)
++ # DMIDA does not connect the HD64465 PS/2 keyboard port
++ # but we allow for USB keyboards to be plugged in.
++ KEYMAP = defkeymap.o
++ KEYBD = # hd64465_keyb.o pc_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_EC3104),y)
++ KEYMAP = defkeymap.o
++ KEYBD = ec3104_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_DREAMCAST),y)
++ KEYMAP = defkeymap.o
++ KEYBD =
++ CONSOLE = console.o
++ endif
++endif
+
-+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */
-+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
++ifeq ($(CONFIG_DECSTATION),y)
++ KEYMAP =
++ KEYBD =
++endif
+
-+/*
-+ * AVALANCHE DMA controller base
-+ */
++ifeq ($(CONFIG_BAGET_MIPS),y)
++ KEYBD =
++ SERIAL = vac-serial.o
++endif
+
-+#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */
++ifeq ($(CONFIG_NINO),y)
++ SERIAL =
++endif
+
++ifneq ($(CONFIG_SUN_SERIAL),)
++ SERIAL =
++endif
+
++ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
++ KEYBD = qtronix.o
++ KEYMAP = qtronixmap.o
++endif
+
-+/*
-+ * GPIO register map
-+ */
++ifeq ($(CONFIG_DUMMY_KEYB),y)
++ KEYBD = dummy_keyb.o
++endif
+
-+/* to be obtained from avalanche_map.h */
-+#define AVALANCHE_GPIO_WRITE_REG (KSEG1ADDR(0xa8610904))
-+#define AVALANCHE_GPIO_DIRECTION_REG (KSEG1ADDR(0xa8610908))
-+#define AVALANCHE_GPIO_MODE_REG (KSEG1ADDR(0xa861090C))
-+#define AVALANCHE_GPIO_PIN_COUNT 32
-+#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0,0}
++obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
++obj-$(CONFIG_SERIAL) += $(SERIAL)
++obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
++obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
++obj-$(CONFIG_SERIAL_21285) += serial_21285.o
++obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
++obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
++obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o
++obj-$(CONFIG_SERIAL_DEC) += decserial.o
++
++ifndef CONFIG_SUN_KEYBOARD
++ obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
++else
++ obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
++endif
+
++obj-$(CONFIG_HIL) += hp_keyb.o
++obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
++obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
++obj-$(CONFIG_ROCKETPORT) += rocket.o
++obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
++obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
++obj-$(CONFIG_DIGI) += pcxx.o
++obj-$(CONFIG_DIGIEPCA) += epca.o
++obj-$(CONFIG_CYCLADES) += cyclades.o
++obj-$(CONFIG_STALLION) += stallion.o
++obj-$(CONFIG_ISTALLION) += istallion.o
++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
++obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
++obj-$(CONFIG_RISCOM8) += riscom8.o
++obj-$(CONFIG_ISI) += isicom.o
++obj-$(CONFIG_ESPSERIAL) += esp.o
++obj-$(CONFIG_SYNCLINK) += synclink.o
++obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
++obj-$(CONFIG_N_HDLC) += n_hdlc.o
++obj-$(CONFIG_SPECIALIX) += specialix.o
++obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
++obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
++obj-$(CONFIG_SX) += sx.o generic_serial.o
++obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o
++obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
++obj-$(CONFIG_SERIAL167) += serial167.o
++obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
++obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
++obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o
++obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o
++obj-$(CONFIG_IP22_SERIAL) += sgiserial.o
++obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o
++obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o
++
++subdir-$(CONFIG_RIO) += rio
++subdir-$(CONFIG_INPUT) += joystick
++
++obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
++obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
++obj-$(CONFIG_PRINTER) += lp.o
++obj-$(CONFIG_TIPAR) += tipar.o
++obj-$(CONFIG_OBMOUSE) += obmouse.o
++
++ifeq ($(CONFIG_INPUT),y)
++obj-y += joystick/js.o
++endif
+
-+// Let us define board specific information here.
++#
++# Texas Intruments VLYNQ driver
++#
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o
++
++obj-$(CONFIG_FETCHOP) += fetchop.o
++obj-$(CONFIG_BUSMOUSE) += busmouse.o
++obj-$(CONFIG_DTLK) += dtlk.o
++obj-$(CONFIG_R3964) += n_r3964.o
++obj-$(CONFIG_APPLICOM) += applicom.o
++obj-$(CONFIG_SONYPI) += sonypi.o
++obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
++obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
++obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
++obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
++obj-$(CONFIG_ADBMOUSE) += adbmouse.o
++obj-$(CONFIG_PC110_PAD) += pc110pad.o
++obj-$(CONFIG_MK712_MOUSE) += mk712.o
++obj-$(CONFIG_RTC) += rtc.o
++obj-$(CONFIG_GEN_RTC) += genrtc.o
++obj-$(CONFIG_EFI_RTC) += efirtc.o
++obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
++obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
++ifeq ($(CONFIG_PPC),)
++ obj-$(CONFIG_NVRAM) += nvram.o
++endif
++obj-$(CONFIG_TOSHIBA) += toshiba.o
++obj-$(CONFIG_I8K) += i8k.o
++obj-$(CONFIG_DS1286) += ds1286.o
++obj-$(CONFIG_DS1620) += ds1620.o
++obj-$(CONFIG_DS1742) += ds1742.o
++obj-$(CONFIG_INTEL_RNG) += i810_rng.o
++obj-$(CONFIG_AMD_RNG) += amd768_rng.o
++obj-$(CONFIG_HW_RANDOM) += hw_random.o
++obj-$(CONFIG_AMD_PM768) += amd76x_pm.o
++obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
++
++obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
++obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
++obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
++obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
++obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
++obj-$(CONFIG_COBALT_LCD) += lcd.o
++
++obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
++
++subdir-$(CONFIG_FTAPE) += ftape
++subdir-$(CONFIG_DRM_OLD) += drm-4.0
++subdir-$(CONFIG_DRM_NEW) += drm
++subdir-$(CONFIG_PCMCIA) += pcmcia
++subdir-$(CONFIG_AGP) += agp
++
++ifeq ($(CONFIG_FTAPE),y)
++obj-y += ftape/ftape.o
++endif
+
-+#if defined(CONFIG_AR7DB)
++obj-$(CONFIG_H8) += h8.o
++obj-$(CONFIG_PPDEV) += ppdev.o
++obj-$(CONFIG_DZ) += dz.o
++obj-$(CONFIG_NWBUTTON) += nwbutton.o
++obj-$(CONFIG_NWFLASH) += nwflash.o
++obj-$(CONFIG_SCx200) += scx200.o
++obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
++
++# Only one watchdog can succeed. We probe the hardware watchdog
++# drivers first, then the softdog driver. This means if your hardware
++# watchdog dies or is 'borrowed' for some reason the software watchdog
++# still gives you some cover.
++
++obj-$(CONFIG_PCWATCHDOG) += pcwd.o
++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
++obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
++obj-$(CONFIG_WDT) += wdt.o
++obj-$(CONFIG_WDTPCI) += wdt_pci.o
++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
++obj-$(CONFIG_977_WATCHDOG) += wdt977.o
++obj-$(CONFIG_I810_TCO) += i810-tco.o
++obj-$(CONFIG_MACHZ_WDT) += machzwd.o
++obj-$(CONFIG_SH_WDT) += shwdt.o
++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
++obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
++
++subdir-$(CONFIG_MWAVE) += mwave
++ifeq ($(CONFIG_MWAVE),y)
++ obj-y += mwave/mwave.o
++endif
+
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x55555555
++subdir-$(CONFIG_IPMI_HANDLER) += ipmi
++ifeq ($(CONFIG_IPMI_HANDLER),y)
++ obj-y += ipmi/ipmi.o
++endif
+
-+#endif
++include $(TOPDIR)/Rules.make
+
++fastdep:
+
-+#if defined(CONFIG_AR7RD)
++conmakehash: conmakehash.c
++ $(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
+
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++consolemap_deftbl.c: $(FONTMAPFILE) conmakehash
++ ./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c
+
-+#if defined(CONFIG_AR7_MARVELL)
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000
-+#else
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2
-+#endif
++consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
+
-+#endif
++.DELETE_ON_ERROR:
+
++defkeymap.c: defkeymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+
-+#if defined(CONFIG_AR7WRD)
++qtronixmap.c: qtronixmap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++ibm_workpad_keymap.c: ibm_workpad_keymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+
-+#if defined(CONFIG_AR7_MARVELL)
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000
-+#else
-+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2
-+#endif
++victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile
+--- linux.old/drivers/char/avalanche_vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/Makefile 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,16 @@
++#
++# Makefile for the linux kernel.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now in the main makefile...
+
-+#endif
++O_TARGET := avalanche_vlynq.o
+
-+extern unsigned int tnetd73xx_vbus_freq;
-+#define AVALANCHE_VBUS_FREQ tnetd73xx_vbus_freq
++export-objs := vlynq_board.o
+
-+static inline unsigned int get_avalanche_vbus_freq(void)
-+{
-+ return (tnetd73xx_vbus_freq);
-+}
++obj-y += vlynq_drv.o vlynq_hal.o vlynq_board.o
+
-+#endif /*_MIPS_AR7_H */
-diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche.h linux-2.4.30.dev/include/asm-mips/ar7/avalanche.h
---- linux-2.4.30/include/asm-mips/ar7/avalanche.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/avalanche.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,183 @@
-+/* $Id$
-+ *
-+ * avalanche.h
-+ *
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,184 @@
++/*
+ * Jeff Harrell, jharrell@ti.com
-+ * Copyright (C) 2000,2001,2002 Texas Instruments Inc.
-+ *
-+ *
-+ * ########################################################################
++ * Copyright (C) 2001 Texas Instruments, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
-+ * ########################################################################
++ * Texas Instruments Sangam specific setup.
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <asm/ar7/vlynq.h>
++
++#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR 30 /* MSB - 1 bit */
++#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR 31 /* MSB bit */
++#define SYS_VLYNQ_OPTIONS 0x7F; /* all options*/
++
++/* These defines are board specific */
++
++
++#define VLYNQ0_REMOTE_WINDOW1_OFFSET (0x0C000000)
++#define VLYNQ0_REMOTE_WINDOW1_SIZE (0x500)
++
++
++#define VLYNQ1_REMOTE_WINDOW1_OFFSET (0x0C000000)
++#define VLYNQ1_REMOTE_WINDOW1_SIZE (0x500)
++
++
++extern VLYNQ_DEV vlynqDevice0, vlynqDevice1;
++int vlynq_init_status[2] = {0, 0};
++EXPORT_SYMBOL(vlynq_init_status);
++static int reset_hack = 1;
++
++void vlynq_ar7wrd_dev_init()
++{
++ *(unsigned long*) AVALANCHE_GPIO_ENBL |= (1<<18);
++ vlynq_delay(20000);
++ *(unsigned long*) AVALANCHE_GPIO_DIR &= ~(1<<18);
++ vlynq_delay(20000);
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18);
++ vlynq_delay(50000);
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|= (1<<18);
++ vlynq_delay(50000);
++
++ /* Initialize the MIPS host vlynq driver for a given vlynq interface */
++ vlynqDevice0.dev_idx = 0; /* first vlynq module - this parameter is for reference only */
++ vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; /* vlynq0 module base address */
++
++#if defined(CONFIG_VLYNQ_CLK_LOCAL)
++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL;
++#else
++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE;
++#endif
++ vlynqDevice0.clk_div = 0x01; /* board/hardware specific */
++ vlynqDevice0.state = VLYNQ_DRV_STATE_UNINIT; /* uninitialized module */
++
++ /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */
++ /*Local memory configuration */
++
++ /* Demiurg : not good !*/
++#if 0
++ vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */
++ vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */
++ vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE;
++#endif
++
++ /* Demiurg : This is how it should be ! */
++ vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE);
++#define VLYNQ_ACX111_MEM_OFFSET 0xC0000000 /* Physical address of ACX111 memory */
++#define VLYNQ_ACX111_MEM_SIZE 0x00040000 /* Total size of the ACX111 memory */
++#define VLYNQ_ACX111_REG_OFFSET 0xF0000000 /* PHYS_ADDR of ACX111 control registers */
++#define VLYNQ_ACX111_REG_SIZE 0x00022000 /* Size of ACX111 registers area, MAC+PHY */
++#define ACX111_VL1_REMOTE_SIZE 0x1000000
++ vlynqDevice0.remote_mem.RxOffset[0] = VLYNQ_ACX111_MEM_OFFSET;
++ vlynqDevice0.remote_mem.RxSize[0] = VLYNQ_ACX111_MEM_SIZE ;
++ vlynqDevice0.remote_mem.RxOffset[1] = VLYNQ_ACX111_REG_OFFSET;
++ vlynqDevice0.remote_mem.RxSize[1] = VLYNQ_ACX111_REG_SIZE ;
++ vlynqDevice0.remote_mem.Txmap = 0;
++ vlynqDevice0.local_mem.RxOffset[0] = AVALANCHE_SDRAM_BASE;
++ vlynqDevice0.local_mem.RxSize[0] = ACX111_VL1_REMOTE_SIZE;
++
++
++ /* Local interrupt configuration */
++ vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; /* Host handles vlynq interrupts*/
++ vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* vlynq root isr used */
++ vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR;
++ vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */
++
++ /* Remote interrupt configuration */
++ vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; /* MIPS handles interrupts */
++ vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* Not significant since MIPS handles interrupts */
++ vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR;
++ vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */
++
++ if(reset_hack != 1)
++ printk("About to re-init the VLYNQ.\n");
++
++ if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0)
++ {
++ /* Suraj added the following to keep the 1130 going. */
++ vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */,
++ 0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */,
++ VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */);
++
++ /* System wide interrupt is 80 for 1130, please note. */
++ vlynq_init_status[0] = 1;
++ reset_hack = 2;
++ }
++ else
++ {
++ if(reset_hack == 1)
++ printk("VLYNQ INIT FAILED: Please try cold reboot. \n");
++ else
++ printk("Failed to initialize the VLYNQ interface at insmod.\n");
++
++ }
++}
++
++void vlynq_dev_init(void)
++{
++ volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE;
++
++ *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */
++
++ vlynq_delay(20000);
++
++ /* Bring vlynq out of reset if not already done */
++ *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */
++ vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/
++
++ vlynq_ar7wrd_dev_init( );
++
++}
++
++/* This function is board specific and should be ported for each board. */
++void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit,
++ AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++ if(module_reset_bit >= 32)
++ return;
++
++ switch(module_reset_bit)
++ {
++ case 0:
++ if(OUT_OF_RESET == reset_ctrl)
++ {
++ if(reset_hack) return;
++
++ vlynq_delay(20000);
++ printk("Un-resetting the remote device.\n");
++ vlynq_dev_init();
++ printk("Re-initialized the VLYNQ.\n");
++ reset_hack = 2;
++ }
++ else if(IN_RESET == reset_ctrl)
++ {
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18);
++
++ vlynq_delay(20000);
++ printk("Resetting the remote device.\n");
++ reset_hack = 0;
++ }
++ else
++ ;
++ break;
++
++ default:
++ break;
++
++ }
++}
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c 2005-11-10 01:10:45.891577500 +0100
+@@ -0,0 +1,243 @@
++/******************************************************************************
++ * FILE PURPOSE: Vlynq Linux Device Driver Source
++ ******************************************************************************
++ * FILE NAME: vlynq_drv.c
++ *
++ * DESCRIPTION: Vlynq Linux Device Driver Source
++ *
++ * REVISION HISTORY:
+ *
-+ * Defines of the AVALANCHE board specific address-MAP, registers, etc.
++ * Date Description Author
++ *-----------------------------------------------------------------------------
++ * 17 July 2003 Initial Creation Anant Gole
++ * 17 Dec 2003 Updates Sharath Kumar
+ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/smp_lock.h>
++#include <linux/delay.h>
++#include <linux/proc_fs.h>
++#include <linux/capability.h>
++#include <asm/ar7/avalanche_intc.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/vlynq.h>
++
++
++#define TI_VLYNQ_VERSION "0.2"
++
++/* debug on ? */
++#define VLYNQ_DEBUG
++
++/* Macro for debug and error printf's */
++#ifdef VLYNQ_DEBUG
++#define DBGPRINT printk
++#else
++#define DBGPRINT(x)
++#endif
++
++#define ERRPRINT printk
++
++/* Define the max vlynq ports this driver will support.
++ Device name strings are statically added here */
++#define MAX_VLYNQ_PORTS 2
++
++
++/* Type define for VLYNQ private structure */
++typedef struct vlynqPriv{
++ int irq;
++ VLYNQ_DEV *vlynqDevice;
++}VLYNQ_PRIV;
++
++extern int vlynq_init_status[2];
++
++/* Extern Global variable for vlynq devices used in initialization of the vlynq device
++ * These variables need to be populated/initialized by the system as part of initialization
++ * process. The vlynq enumerator can run at initialization and populate these globals
+ */
-+#ifndef _MIPS_AVALANCHE_H
-+#define _MIPS_AVALANCHE_H
+
-+#include <asm/addrspace.h>
++VLYNQ_DEV vlynqDevice0;
++VLYNQ_DEV vlynqDevice1;
+
-+/*
-+ * AVALANCHE board SDRAM base address. This is used to setup the
-+ * bootmem tables
++/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take
++ * care of compilation in case of single vlynq device
+ */
+
-+#define AVALANCHE_SDRAM_BASE 0x14000000UL
++#ifndef AVALANCHE_HIGH_VLYNQ_INT
++#define AVALANCHE_HIGH_VLYNQ_INT 0
++#endif
++
+
-+/*
-+ * AVALANCHE board vectors
++
++/* vlynq private object */
++VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = {
++ { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0},
++ { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1},
++};
++
++extern void vlynq_dev_init(void);
++
++
++/* =================================== all the operations */
++
++static int
++vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ return 0;
++}
++
++static struct file_operations vlynq_fops = {
++ owner: THIS_MODULE,
++ ioctl: vlynq_ioctl,
++};
++
++/* Vlynq device object */
++static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = {
++ { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops },
++ { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops },
++};
++
++
++/* Proc read function */
++static int
++vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused)
++{
++ int instance;
++ int len = 0;
++
++ len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS);
++
++ for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++)
++ {
++ int link_state;
++ char *link_msg[] = {" DOWN "," UP "};
++
++ if(vlynq_init_status[instance] == 0)
++ link_state = 0;
++
++ else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice))
++ link_state = 1;
++
++ else
++ link_state = 0;
++
++ len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]);
++
++ }
++ /* Print info about vlynq device 1 */
++
++ return len;
++}
++
++
++/* Proc function to display driver version */
++static int
++vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++{
++ int instance;
++ int len=0;
++
++ len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION);
++ return len;
++}
++
++
++
++
++/* Wrapper for vlynq ISR */
++static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs)
++{
++ vlynq_root_isr(arg);
++}
++
++/* =================================== init and cleanup */
++
++int vlynq_init_module(void)
++{
++ int ret;
++ int unit = 0;
++ int instance_count = CONFIG_AR7_VLYNQ_PORTS;
++ volatile int *ptr;
++
++ vlynq_dev_init();
++
++ DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS);
++ /* If num of configured vlynq ports > supported by driver return error */
++ if (instance_count > MAX_VLYNQ_PORTS)
++ {
++ ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS);
++ return (-1);
++ }
++
++ /* register the misc device */
++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++ {
++ ret = misc_register(&vlynq_dev[unit]);
++
++ if(ret < 0)
++ {
++ ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit);
++ continue;
++ }
++ else
++ DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n",
++ vlynq_dev[unit].name, vlynq_dev[unit].minor, ret);
++#if 0
++
++ DBGPRINT("Calling vlynq init\n");
++
++ /* Read the global variable for VLYNQ device structure and initialize vlynq driver */
++ ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL );
++#endif
++
++ if(vlynq_init_status[unit] == 0)
++ {
++ printk("VLYNQ %d : init failed\n",unit);
++ continue;
++ }
++
++ /* Check link before proceeding */
++ if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice))
++ {
++ DBGPRINT("\nError: Vlynq link not available.trying once before Exiting");
++ }
++ else
++ {
++ DBGPRINT("Vlynq instance:%d Link UP\n",unit);
++
++ /* Install the vlynq local root ISR */
++ request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice);
++ }
++ }
++
++ proc_mkdir("avalanche", NULL);
++ /* Creating proc entry for the devices */
++ create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL);
++ create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL);
++
++ return 0;
++}
++
++void vlynq_cleanup_module(void)
++{
++ int unit = 0;
++
++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++ {
++ DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name);
++ misc_deregister(&vlynq_dev[unit]);
++ }
++
++ remove_proc_entry("avalanche/vlynq_link", NULL);
++ remove_proc_entry("avalanche/vlynq_ver", NULL);
++}
++
++
++module_init(vlynq_init_module);
++module_exit(vlynq_cleanup_module);
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c 2005-11-10 01:10:45.975582750 +0100
+@@ -0,0 +1,1214 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/***************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.c
++ * Description : This file implements VLYNQ HAL API.
++ * ------------------------------------------------------------------------------
++ ***************************************************************************/
++
++#include <linux/stddef.h>
++#include <linux/types.h>
++#include <asm/ar7/vlynq.h>
++
++/**** Local Function prototypes *******/
++static int vlynqInterruptInit(VLYNQ_DEV *pdev);
++static void vlynq_configClock(VLYNQ_DEV *pdev);
++
++/*** Second argument must be explicitly type casted to
++ * (VLYNQ_DEV*) inside the following functions */
++static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3);
++static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3);
++
++
++volatile int vlynq_delay_value = 0;
++
++/* Code adopted from original vlynq driver */
++void vlynq_delay(unsigned int clktime)
++{
++ int i = 0;
++ volatile int *ptr = &vlynq_delay_value;
++ *ptr = 0;
++
++ /* We are assuming that the each cycle takes about
++ * 23 assembly instructions. */
++ for(i = 0; i < (clktime + 23)/23; i++)
++ {
++ *ptr = *ptr + 1;
++ }
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_configClock()
++ * Description: Configures clock settings based on input parameters
++ * Adapted from original vlyna driver from Cable
+ */
++static void vlynq_configClock(VLYNQ_DEV * pdev)
++{
++ unsigned int tmp;
++
++ switch( pdev->clk_source)
++ {
++ case VLYNQ_CLK_SOURCE_LOCAL: /* we output the clock, clk_div in range [1..8]. */
++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ;
++ VLYNQ_CTRL_REG = tmp;
++ VLYNQ_R_CTRL_REG = 0ul;
++ break;
++ case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */
++ VLYNQ_CTRL_REG = 0ul;
++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ;
++ VLYNQ_R_CTRL_REG = tmp;
++ break;
++ default: /* do nothing about the clock, but clear other bits. */
++ tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK);
++ VLYNQ_CTRL_REG &= tmp;
++ break;
++ }
++}
+
-+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
-+/*
-+ * Avalanche RTC-device indirect register access.
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_link_check()
++ * Description: This function checks the current VLYNQ for a link.
++ * An arbitrary amount of time is allowed for the link to come up .
++ * Returns 0 for "no link / failure " and 1 for "link available".
++ * -----------------------------------------------------------------------------
++ */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev)
++{
++ /*sleep for 64 cycles, allow link to come up*/
++ vlynq_delay(64);
++
++ /* check status register return OK if link is found. */
++ if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK)
++ {
++ return 1; /* Link Available */
++ }
++ else
++ {
++ return 0; /* Link Failure */
++ }
++}
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_init()
++ * Description: Initialization function accepting paramaters for VLYNQ module
++ * initialization. The Options bitmap decides what operations are performed
++ * as a part of initialization. The Input parameters are obtained through the
++ * sub fields of VLYNQ_DEV structure.
+ */
+
-+#define EVM3_RTC_ADR_REG (KSEG1ADDR(0x1f000800))
-+#define EVM3_RTC_DAT_REG (KSEG1ADDR(0x1f000808))
++int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options)
++{
++ unsigned int map;
++ unsigned int val=0,cnt,tmp;
++ unsigned int counter=0;
++ VLYNQ_INTERRUPT_CNTRL *intSetting=NULL;
++
++ /* validate arguments */
++ if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) ||
++ VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) )
++ {
++ return VLYNQ_INVALID_ARG;
++ }
++
++ /** perform all sanity checks first **/
++ if(pdev->state != VLYNQ_DRV_STATE_UNINIT)
++ return VLYNQ_INVALID_DRV_STATE;
++
++ /** Initialize local and remote register set addresses- additional
++ * provision to access the registers directly if need be */
++ pdev->local = (VLYNQ_REG_SET*)pdev->module_base;
++ pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET);
++
++ /* Detect faulty int configuration that might induce int pkt looping */
++ if ( (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) )
++ {
++ /* case when both local and remote are configured */
++ if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE ) /* interrupts transfered to remote from local */
++ && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE) /* interrupts transfered from remote to local */
++ && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) )
++ {
++ return (VLYNQ_INT_CONFIG_ERR);
++ }
++ }
++
++ pdev->state = VLYNQ_DRV_STATE_ININIT;
++ pdev->intCount = 0;
++ pdev->isrCount = 0;
++
++ /*** Its assumed that the vlynq module has been brought out of reset
++ * before invocation of vlynq_init. Since, this operation is board specific
++ * it must be handled outside this generic driver */
++
++ /* Assert reset the remote device, call reset_cb,
++ * reset CB holds Reset according to the device needs. */
++ VLYNQ_RESETCB(VLYNQ_RESET_ASSERT);
++
++ /* Handle VLYNQ clock, HW default (Sense On Reset) is
++ * usually input for all the devices. */
++ if (options & VLYNQ_INIT_CONFIG_CLOCK)
++ {
++ vlynq_configClock(pdev);
++ }
++
++ /* Call reset_cb again. It will release the remote device
++ * from reset, and wait for a while. */
++ VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT);
++
++ if(options & VLYNQ_INIT_CHECK_LINK )
++ {
++ /* Check for link up during initialization*/
++ while( counter < 25 )
++ {
++ /* loop around giving a chance for link status to settle down */
++ counter++;
++ if(vlynq_link_check(pdev))
++ {
++ /* Link is up exit loop*/
++ break;
++ }
++
++ vlynq_delay(4000);
++ }/*end of while counter loop */
++
++ if(!vlynq_link_check(pdev))
++ {
++ /* Handle this case as abort */
++ pdev->state = VLYNQ_DRV_STATE_ERROR;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++ return VLYNQ_LINK_DOWN;
++ }/* end of if not vlynq_link_check conditional block */
++
++ }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */
++
++
++ if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS)
++ {
++ /* Initialise local memory regions . This initialization lets
++ * the local host access remote device memory regions*/
++ int i;
++
++ /* configure the VLYNQ portal window to a PHYSICAL
++ * address of the local CPU */
++ VLYNQ_ALIGN4(pdev->local_mem.Txmap);
++ VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap);
++
++ /*This code assumes input parameter is itself a physical address */
++ for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++)
++ {
++ /* Physical address on the remote */
++ map = i+1;
++ VLYNQ_R_RXMAP_SIZE_REG(map) = 0;
++ if( pdev->remote_mem.RxSize[i])
++ {
++ VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]);
++ VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]);
++ VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i];
++ VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i];
++ }
++ }
++ }
++
++ if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS )
++ {
++ int i;
++
++ /* Initialise remote memory regions. This initialization lets remote
++ * device access local host memory regions. It configures the VLYNQ portal
++ * window to a PHYSICAL address of the remote */
++ VLYNQ_ALIGN4(pdev->remote_mem.Txmap);
++ VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap;
++
++ for( i=0; i<VLYNQ_MAX_MEMORY_REGIONS; i++)
++ {
++ /* Physical address on the local */
++ map = i+1;
++ VLYNQ_RXMAP_SIZE_REG(map) = 0;
++ if( pdev->local_mem.RxSize[i])
++ {
++ VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]);
++ VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]);
++ VLYNQ_RXMAP_OFFSET_REG(map) = (pdev->local_mem.RxOffset[i]);
++ VLYNQ_RXMAP_SIZE_REG(map) = (pdev->local_mem.RxSize[i]);
++ }
++ }
++ }
++
++ /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */
++ pdev->width = 3 + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG)
++ + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG);
++
++ /* chance to initialize the device, e.g. to boost VLYNQ
++ * clock by modifying pdev->clk_div or and verify the width. */
++ VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH);
++
++ /* Handle VLYNQ clock, HW default (Sense On Reset) is
++ * usually input for all the devices. */
++ if(options & VLYNQ_INIT_CONFIG_CLOCK )
++ {
++ vlynq_configClock(pdev);
++ }
++
++ /* last check for link*/
++ if(options & VLYNQ_INIT_CHECK_LINK )
++ {
++ /* Final Check for link during initialization*/
++ while( counter < 25 )
++ {
++ /* loop around giving a chance for link status to settle down */
++ counter++;
++ if(vlynq_link_check(pdev))
++ {
++ /* Link is up exit loop*/
++ break;
++ }
++
++ vlynq_delay(4000);
++ }/*end of while counter loop */
++
++ if(!vlynq_link_check(pdev))
++ {
++ /* Handle this case as abort */
++ pdev->state = VLYNQ_DRV_STATE_ERROR;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++ return VLYNQ_LINK_DOWN;
++ }/* end of if not vlynq_link_check conditional block */
++
++ } /* end of if options & VLYNQ_INIT_CHECK_LINK */
++
++ if(options & VLYNQ_INIT_LOCAL_INTERRUPTS )
++ {
++ /* Configure local interrupt settings */
++ intSetting = &(pdev->local_irq);
++
++ /* Map local module status interrupts to interrupt vector*/
++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++
++ /* enable local module status interrupts */
++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++
++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++ {
++ /*set the intLocal bit*/
++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++ }
++
++ /* Irrespective of whether interrupts are handled locally, program
++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++ * i.e remote packets are set intPending register->which will result in
++ * same packet being sent out) has been done already
++ */
++
++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR)
++ {
++ /* Set the int2Cfg register, so that remote interrupt
++ * packets are written to intPending register */
++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++
++ /* Set intPtr register to point to intPending register */
++ VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ;
++ }
++ else
++ {
++ /*set the interrupt pointer register*/
++ VLYNQ_INT_PTR_REG = intSetting->intr_ptr;
++ /* Dont bother to modify int2Cfg as it would be zero */
++ }
++
++ /** Clear bits related to INT settings in control register **/
++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++
++ /** Or the bits to be set with Control register **/
++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val;
++
++ /* initialise local ICB */
++ if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL)
++ return VLYNQ_MEMALLOC_FAIL;
++
++ /* Install handler for local module status interrupts. By default when
++ * local interrupt setting is initialised, the local module status are
++ * enabled and handler hooked up */
++ if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr,
++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++ return VLYNQ_INVALID_ARG;
++ } /* end of init local interrupts */
++
++ if(options & VLYNQ_INIT_REMOTE_INTERRUPTS )
++ {
++ /* Configure remote interrupt settings from configuration */
++ intSetting = &(pdev->remote_irq);
++
++ /* Map remote module status interrupts to remote interrupt vector*/
++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++ /* enable remote module status interrupts */
++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++
++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++ {
++ /*set the intLocal bit*/
++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++ }
++
++ /* Irrespective of whether interrupts are handled locally, program
++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++ * i.e remote packets are set intPending register->which will result in
++ * same packet being sent out) has been done already
++ */
++
++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR)
++ {
++ /* Set the int2Cfg register, so that remote interrupt
++ * packets are written to intPending register */
++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++ /* Set intPtr register to point to intPending register */
++ VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ;
++ }
++ else
++ {
++ /*set the interrupt pointer register*/
++ VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr;
++ /* Dont bother to modify int2Cfg as it would be zero */
++ }
++
++ if( (intSetting->intLocal == VLYNQ_INT_REMOTE) &&
++ (options & VLYNQ_INIT_LOCAL_INTERRUPTS) &&
++ (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) )
++ {
++ /* Install handler for remote module status interrupts. By default when
++ * remote interrupts are forwarded to local root_isr then remote_module_isr is
++ * enabled and handler hooked up */
++ if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr,
++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++ return VLYNQ_INVALID_ARG;
++ }
++
++
++ /** Clear bits related to INT settings in control register **/
++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++
++ /** Or the bits to be set with the remote Control register **/
++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val;
++
++ } /* init remote interrupt settings*/
++
++ if(options & VLYNQ_INIT_CLEAR_ERRORS )
++ {
++ /* Clear errors during initialization */
++ tmp = VLYNQ_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++ VLYNQ_STATUS_REG = tmp;
++ tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++ VLYNQ_R_STATUS_REG = tmp;
++ }
++
++ /* clear int status */
++ val = VLYNQ_INT_STAT_REG;
++ VLYNQ_INT_STAT_REG = val;
++
++ /* finish initialization */
++ pdev->state = VLYNQ_DRV_STATE_RUN;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITOK);
++ return VLYNQ_SUCCESS;
++
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynqInterruptInit()
++ * Description: This local function is used to set up the ICB table for the
++ * VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq
++ * device instance whose ICB is allocated.
++ * Return : returns VLYNQ_SUCCESS or vlynq error for failure
++ * -----------------------------------------------------------------------------
++ */
++static int vlynqInterruptInit(VLYNQ_DEV *pdev)
++{
++ int i, numslots;
++
++ /* Memory allocated statically.
++ * Initialise ICB,free list.Indicate primary slot empty.
++ * Intialise intVector <==> map_vector translation table*/
++ for(i=0; i < VLYNQ_NUM_INT_BITS; i++)
++ {
++ pdev->pIntrCB[i].isr = NULL;
++ pdev->pIntrCB[i].next = NULL; /*nothing chained */
++ pdev->vector_map[i] = -1; /* indicates unmapped */
++ }
++
++ /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots
++ * required only when interrupt chaining/sharing is supported. In case
++ * of chained interrupts the list starts from primary slot and the
++ * additional slots are obtained from the common free area */
++
++ /* Initialise freelist */
++
++ numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS;
++
++ if (numslots > VLYNQ_NUM_INT_BITS)
++ {
++ pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]);
++
++ for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++)
++ {
++ pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]);
++ pdev->pIntrCB[i].isr = NULL;
++ }
++ pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/
++ pdev->pIntrCB[i].isr=NULL;
++ }
++ else
++ {
++ pdev->freelist = NULL;
++ }
++
++ /** Reset mapping for IV 0-7 **/
++ VLYNQ_IVR_03TO00_REG = 0;
++ VLYNQ_IVR_07TO04_REG = 0;
++
++ return VLYNQ_SUCCESS;
++}
++
++/** remember that hooking up of root ISR handler with the interrupt controller
++ * is not done as a part of this driver. Typically, it must be done after
++ * invoking vlynq_init*/
++
++
++ /* ----------------------------------------------------------------------------
++ * ISR with the SOC interrupt controller. This ISR typically scans
++ * the Int PENDING/SET register in the VLYNQ module and calls the
++ * appropriate ISR associated with the correponding vector number.
++ * -----------------------------------------------------------------------------
++ */
++void vlynq_root_isr(void *arg)
++{
++ int source; /* Bit position of pending interrupt, start from 0 */
++ unsigned int interrupts, clrInterrupts;
++ VLYNQ_DEV * pdev;
++ VLYNQ_INTR_CNTRL_ICB *entry;
++
++ pdev=(VLYNQ_DEV*)(arg); /*obtain the vlynq device pointer*/
++
++ interrupts = VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */
++ VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */
++ clrInterrupts = interrupts; /* save them for further analysis */
++
++ debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0);
++
++ /* Scan interrupt bits */
++ source =0;
++ while( clrInterrupts != 0)
++ {
++ /* test if bit is set? */
++ if( 0x1ul & clrInterrupts)
++ {
++ entry = &(pdev->pIntrCB[source]); /* Get the ISR entry */
++ pdev->intCount++; /* update interrupt count */
++ if(entry->isr != NULL)
++ {
++ do
++ {
++ pdev->isrCount++; /* update isr invocation count */
++ /* Call the user ISR and update the count for ISR */
++ entry->isrCount++;
++ entry->isr(entry->arg1, entry->arg2, entry->arg3);
++ if (entry->next == NULL) break;
++ entry = entry->next;
++
++ } while (entry->isr != NULL);
++ }
++ else
++ {
++ debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0);
++ }
++ }
++ clrInterrupts >>= 1; /* Next source bit */
++ ++source;
++ } /* endWhile clrInterrupts != 0 */
++}
++
++
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_local__module_isr()
++ * Description: This ISR is attached to the local VLYNQ interrupt vector
++ * by the Vlynq Driver when local interrupts are being handled. i.e.
++ * intLocal=1. This ISR handles local Vlynq module status interrupts only
++ * AS a part of this ISR, user callback in VLYNQ_DEV structure
++ * is invoked.
++ * VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3)
++{
++ VLYNQ_REPORT_CB func;
++ unsigned int dwStatRegVal;
++ VLYNQ_DEV * pdev;
++
++ pdev = (VLYNQ_DEV*) arg1;
++ /* Callback function is read from the device pointer that is passed as an argument */
++ func = pdev->report_cb;
++
++ /* read local status register */
++ dwStatRegVal = VLYNQ_STATUS_REG;
++
++ /* clear pending events */
++ VLYNQ_STATUS_REG = dwStatRegVal;
++
++ /* invoke user callback */
++ if( func != NULL)
++ func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal);
++
++}
++
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_remote_module_isr()
++ * Description: This ISR is attached to the remote VLYNQ interrupt vector
++ * by the Vlynq Driver when remote interrupts are being handled locally. i.e.
++ * intLocal=1. This ISR handles local Vlynq module status interrupts only
++ * AS a part of this ISR, user callback in VLYNQ_DEV structure
++ * is invoked.
++ * The parameters irq,regs ar unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3)
++{
++ VLYNQ_REPORT_CB func;
++ unsigned int dwStatRegVal;
++ VLYNQ_DEV * pdev;
++
++
++ pdev = (VLYNQ_DEV*) arg1;
++
++ /* Callback function is read from the device pointer that is passed as an argument */
++ func = pdev->report_cb;
++
++ /* read local status register */
++ dwStatRegVal = VLYNQ_R_STATUS_REG;
++
++ /* clear pending events */
++ VLYNQ_R_STATUS_REG = dwStatRegVal;
++
++ /* invoke user callback */
++ if( func != NULL)
++ func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal);
++
++}
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_get_count()
++ * Description: This function returns the number of times a particular intr
++ * has been invoked.
++ *
++ * It returns 0, if erroneous map_vector is specified or if the corres isr
++ * has not been registered with VLYNQ.
++ */
++unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev,
++ unsigned int map_vector)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry;
++ unsigned int count = 0;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return count;
++
++ entry = &(pdev->pIntrCB[map_vector]);
++
++ if (entry)
++ count = entry->isrCount;
++
++ return (count);
++}
++
+
-+/*
-+ * Evm3 interrupt controller register base (primary)
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_install_isr()
++ * Description: This function installs ISR for Vlynq interrupt vector
++ * bits(in IntPending register). This function should be used only when
++ * Vlynq interrupts are being handled locally(remote may be programmed to send
++ * interrupt packets).Also, the int2cfg should be 1 and the least significant
++ * 8 bits of the Interrupt Pointer Register must point to Interrupt
++ * Pending/Set Register).
++ * If host int2cfg=0 and the Interrupt Pointer register contains
++ * the address of the interrupt set register in the interrupt controller
++ * module of the local device , then the ISR for the remote interrupt must be
++ * directly registered with the Interrupt controller and must not use this API
++ * Note: this function simply installs the ISR in ICB It doesnt modify
++ * any register settings
+ */
++int
++vlynq_install_isr(VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry;
++
++ if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) )
++ return VLYNQ_INVALID_ARG;
++
++ entry = &(pdev->pIntrCB[map_vector]);
++
++ if(entry->isr == NULL)
++ {
++ entry->isr = isr;
++ entry->arg1 = arg1;
++ entry->arg2 = arg2;
++ entry->arg3 = arg3;
++ entry->next = NULL;
++ }
++ else
++ {
++ /** No more empty slots,return error */
++ if(pdev->freelist == NULL)
++ return VLYNQ_MEMALLOC_FAIL;
++
++ while(entry->next != NULL)
++ {
++ entry = entry->next;
++ }
++
++ /* Append new node to the chain */
++ entry->next = pdev->freelist;
++ /* Remove the appended node from freelist */
++ pdev->freelist = pdev->freelist->next;
++ entry= entry->next;
++
++ /*** Set the ICB fields ***/
++ entry->isr = isr;
++ entry->arg1 = arg1;
++ entry->arg2 = arg2;
++ entry->arg3 = arg3;
++ entry->next = NULL;
++ }
++
++ return VLYNQ_SUCCESS;
++}
+
-+#define AVALANCHE_ICTRL_REGS_BASE (KSEG1ADDR(0x08612400))
+
-+/*
-+ * Avalanche exception controller register base (secondary)
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_uninstall_isr
++ * Description: This function is used to uninstall a previously
++ * registered ISR. In case of shared/chained interrupts, the
++ * void * arg parameter must uniquely identify the ISR to be
++ * uninstalled.
++ * Note: this function simply uninstalls the ISR in ICB
++ * It doesnt modify any register settings
+ */
-+#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE+0x80)
++int
++vlynq_uninstall_isr(VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ void *arg1, void *arg2, void *arg3)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry,*temp;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return VLYNQ_INVALID_ARG;
++
++ entry = &(pdev->pIntrCB[map_vector]);
++
++ if(entry->isr == NULL )
++ return VLYNQ_ISR_NON_EXISTENT;
++
++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++ {
++ if(entry->next == NULL)
++ {
++ entry->isr=NULL;
++ return VLYNQ_SUCCESS;
++ }
++ else
++ {
++ temp = entry->next;
++ /* Copy next node in the chain to prim.slot */
++ entry->isr = temp->isr;
++ entry->arg1 = temp->arg1;
++ entry->arg2 = temp->arg2;
++ entry->arg3 = temp->arg3;
++ entry->next = temp->next;
++ /* Free the just copied node */
++ temp->isr = NULL;
++ temp->arg1 = NULL;
++ temp->arg2 = NULL;
++ temp->arg3 = NULL;
++ temp->next = pdev->freelist;
++ pdev->freelist = temp;
++ return VLYNQ_SUCCESS;
++ }
++ }
++ else
++ {
++ temp = entry;
++ while ( (entry = temp->next) != NULL)
++ {
++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++ {
++ /* remove node from chain */
++ temp->next = entry->next;
++ /* Add the removed node to freelist */
++ entry->isr = NULL;
++ entry->arg1 = NULL;
++ entry->arg2 = NULL;
++ entry->arg3 = NULL;
++ entry->next = pdev->freelist;
++ entry->isrCount = 0;
++ pdev->freelist = entry;
++ return VLYNQ_SUCCESS;
++ }
++ temp = entry;
++ }
++
++ return VLYNQ_ISR_NON_EXISTENT;
++ }
++}
+
+
-+/*
-+ * Avalanche Interrupt Channel Control register base
-+ */
-+#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
+
+
-+/*
-+ * Avalanche UART register base.
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_vector_set()
++ * description:configures interrupt vector mapping,interrupt type
++ * polarity -all in one go.
+ */
++int
++vlynq_interrupt_vector_set(VLYNQ_DEV *pdev, /* vlynq device */
++ unsigned int int_vector, /* int vector on vlynq device */
++ unsigned int map_vector, /* bit for this interrupt */
++ VLYNQ_DEV_TYPE dev_type, /* local or remote device */
++ VLYNQ_INTR_POLARITY pol, /* polarity of interrupt */
++ VLYNQ_INTR_TYPE type) /* pulsed/level interrupt */
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ unsigned int bytemask=0XFF;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) )
++ return VLYNQ_INVALID_ARG;
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* Update the intVector<==> bit position translation table */
++ pdev->vector_map[map_vector] = int_vector;
++
++ /* val has been initialised to zero. we only have to turn on appropriate bits*/
++ if(type == VLYNQ_INTR_PULSED)
++ val |= VLYNQ_IVR_INTTYPE_MASK;
++
++ if(pol == VLYNQ_INTR_ACTIVE_LOW)
++ val |= VLYNQ_IVR_INTPOL_MASK;
++
++ val |= map_vector;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ /* Setting a interrupt vector, leaves the interrupt disabled
++ * which must be enabled subsequently */
++
++ return VLYNQ_SUCCESS;
++}
+
-+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */
-+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
-+/*
-+ * AVALANCHE DMA controller base
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_vector_cntl()
++ * Description:enables/disable interrupt
+ */
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int enable)
++{
++ volatile unsigned int *vecReg;
++ unsigned int val=0;
++ unsigned int intenMask=0x80;
+
-+#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
+
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
+
-+/*
-+ * AVALANCHE display register base.
-+ */
++ /** Clear the correct byte position and then or val **/
++ *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) );
+
-+#define EVM3_ASCII_DISPLAY_POS_BASE (KSEG1ADDR(0x1D000038))
-+#define EVM3_ASCII_DISPLAY_WORD_BASE (KSEG1ADDR(0x1D00003F)) /* How is this used??? JAH */
++ if(enable)
++ {
++ val |= VLYNQ_IVR_INTEN_MASK;
++ /** Write to correct byte position in vecReg*/
++ *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ;
++ }
+
++ return VLYNQ_SUCCESS;
+
-+#define EVM3_ASCIIPOS0 0x1D000038
-+#define EVM3_ASCIIPOS1 0x1D000039
-+#define EVM3_ASCIIPOS2 0x1D00003A
-+#define EVM3_ASCIIPOS3 0x1D00003B
-+#define EVM3_ASCIIPOS4 0x1D00003C
-+#define EVM3_ASCIIPOS5 0x1D00003D
-+#define EVM3_ASCIIPOS6 0x1D00003E
-+#define EVM3_ASCIIPOS7 0x1D00003F
++}/* end of function vlynq_interrupt_vector_cntl */
+
-+/*
-+ * Yamon Prom print address.
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_vector_map()
++ * Description:Configures interrupt vector mapping alone
+ */
-+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
-+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++int
++vlynq_interrupt_vector_map( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int int_vector,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ unsigned int bytemask=0x1f; /* mask to turn off bits corresponding to int vector */
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) )
++ return VLYNQ_INVALID_ARG;
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* Update the intVector<==> bit position translation table */
++ pdev->vector_map[map_vector] = int_vector;
++
++ /** val has been initialised to zero. we only have to turn on
++ * appropriate bits*/
++ val |= map_vector;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ return VLYNQ_SUCCESS;
++}
+
-+/*
-+ * Evm3 Reset and PSU standby register.
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_set_polarity()
++ * description:configures interrupt polarity .
+ */
-+#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */
-+#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */
-+#define AVALANCHE_GORESET 0x1
-+#define AVALANCHE_GOSTBY 0x1
++int
++vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector,
++ VLYNQ_INTR_POLARITY pol)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++ unsigned int val=0;
++ unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* val has been initialised to zero. we only have to turn on
++ * appropriate bits, if need be*/
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ if( pol == VLYNQ_INTR_ACTIVE_LOW)
++ {
++ val |= VLYNQ_IVR_INTPOL_MASK;
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++}
+
-+/************************************************************************
-+ * PERIPHERAL BUS LEDs (P-LED):
-+*************************************************************************/
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++ unsigned int val=0;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return(-1);
++
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** read the information into val **/
++ val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) );
++
++ return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH));
++}
+
-+/************************************************************************
-+ * P-LED Register Addresses
-+*************************************************************************/
+
-+#define EVM3_PLED (KSEG1ADDR(0x01C500000)) /* 0x1D200000 P-LED */
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_set_type()
++ * description:configures interrupt type .
++ */
++int vlynq_interrupt_set_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector,
++ VLYNQ_INTR_TYPE type)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt type */
++ unsigned int bytemask=0x40;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** val has been initialised to zero. we only have to turn on
++ * appropriate bits if need be*/
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ if( type == VLYNQ_INTR_PULSED)
++ {
++ val |= VLYNQ_IVR_INTTYPE_MASK;
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++}
+
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_get_type()
++ * description:returns interrupt type .
++ */
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return(-1);
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** Read the correct bit position into val **/
++ val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) );
++
++ return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL));
++}
+
-+/************************************************************************
-+ * Register field encodings
-+*************************************************************************/
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_enable()
++ * description:Enable interrupt by writing to IVR register.
++ */
++int vlynq_interrupt_enable( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt enable */
++ unsigned int bytemask=0x80;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** val has been initialised to zero. we only have to turn on
++ * bit corresponding to interrupt enable*/
++ val |= VLYNQ_IVR_INTEN_MASK;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ return VLYNQ_SUCCESS;
++}
+
-+/******** reg: PLED ********/
-+/* bits 7:0: VAL */
-+#define EVM3_PLED_VAL_MSK 0xff
+
-+/* bit 0: */
-+#define EVM3_PLED_BIT0_SHF 0
-+#define EVM3_PLED_BIT0_MSK (1 << EVM3_PLED_BIT0_SHF)
-+#define EVM3_PLED_BIT0_ON EVM3_PLED_BIT0_MSK
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_disable()
++ * description:Disable interrupt by writing to IVR register.
++ */
++int
++vlynq_interrupt_disable( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt enable */
++ unsigned int bytemask=0x80;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* We disable the interrupt by simply turning off the bit
++ * corresponding to Interrupt enable.
++ * Clear the interrupt enable bit in the correct byte position **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /* Dont have to set any bit positions */
++
++ return VLYNQ_SUCCESS;
+
-+/* bit 1: */
-+#define EVM3_PLED_BIT1_SHF 1
-+#define EVM3_PLED_BIT1_MSK (1 << EVM3_PLED_BIT1_SHF)
-+#define EVM3_PLED_BIT1_ON EVM3_PLED_BIT1_MSK
++}
+
-+/* bit 2: */
-+#define EVM3_PLED_BIT2_SHF 2
-+#define EVM3_PLED_BIT2_MSK (1 << EVM3_PLED_BIT2_SHF)
-+#define EVM3_PLED_BIT2_ON EVM3_PLED_BIT2_MSK
+
-+/* bit 3: */
-+#define EVM3_PLED_BIT3_SHF 3
-+#define EVM3_PLED_BIT3_MSK (1 << EVM3_PLED_BIT3_SHF)
-+#define EVM3_PLED_BIT3_ON EVM3_PLED_BIT3_MSK
+
-+/* bit 4: */
-+#define EVM3_PLED_BIT4_SHF 4
-+#define EVM3_PLED_BIT4_MSK (1 << EVM3_PLED_BIT4_SHF)
-+#define EVM3_PLED_BIT4_ON EVM3_PLED_BIT4_MSK
+
-+/* bit 5: */
-+#define EVM3_PLED_BIT5_SHF 5
-+#define EVM3_PLED_BIT5_MSK (1 << EVM3_PLED_BIT5_SHF)
-+#define EVM3_PLED_BIT5_ON EVM3_PLED_BIT5_MSK
+diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
+--- linux.old/drivers/char/serial.c 2005-10-21 16:43:20.709226000 +0200
++++ linux.dev/drivers/char/serial.c 2005-11-10 01:10:46.015585250 +0100
+@@ -419,7 +419,40 @@
+ return 0;
+ }
+
+-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
++#if defined(CONFIG_AR7)
+
-+/* bit 6: */
-+#define EVM3_PLED_BIT6_SHF 6
-+#define EVM3_PLED_BIT6_MSK (1 << EVM3_PLED_BIT6_SHF)
-+#define EVM3_PLED_BIT6_ON EVM3_PLED_BIT6_MSK
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++ return (inb(info->port + (offset * 4)) & 0xff);
++}
+
-+/* bit 7: */
-+#define EVM3_PLED_BIT7_SHF 7
-+#define EVM3_PLED_BIT7_MSK (1 << EVM3_PLED_BIT7_SHF)
-+#define EVM3_PLED_BIT7_ON EVM3_PLED_BIT7_MSK
+
-+#endif /* !(_MIPS_AVALANCHE_H) */
++static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ return (inb(info->port + (offset * 4)) & 0xff);
++#else
++ return (inb_p(info->port + (offset * 4)) & 0xff);
++#endif
++}
+
++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
++{
++ outb(value, info->port + (offset * 4));
++}
+
+
++static _INLINE_ void serial_outp(struct async_struct *info, int offset,
++ int value)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ outb(value, info->port + (offset * 4));
++#else
++ outb_p(value, info->port + (offset * 4));
++#endif
++}
+
++#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
+
+ #include <asm/mips-boards/atlas.h>
+
+@@ -478,8 +511,10 @@
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
++#ifndef CONFIG_AR7
+ #define serial_inp(info, offset) serial_in(info, offset)
+ #define serial_outp(info, offset, value) serial_out(info, offset, value)
++#endif
+
+
+ /*
+@@ -1728,7 +1763,15 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
++#ifdef CONFIG_AR7
++ quot = (CONFIG_AR7_SYS*500000) / baud;
+
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = baud_base / baud;
++#endif
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+@@ -5540,8 +5583,10 @@
+ state->irq = irq_cannonicalize(state->irq);
+ if (state->hub6)
+ state->io_type = SERIAL_IO_HUB6;
++#ifndef CONFIG_AR7
+ if (state->port && check_region(state->port,8))
+ continue;
++#endif
+ #ifdef CONFIG_MCA
+ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
+ continue;
+@@ -5997,7 +6042,15 @@
+ info->io_type = state->io_type;
+ info->iomem_base = state->iomem_base;
+ info->iomem_reg_shift = state->iomem_reg_shift;
++#ifdef CONFIG_AR7
++ quot = (CONFIG_AR7_SYS*500000) / baud;
+
-diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_int.h linux-2.4.30.dev/include/asm-mips/ar7/avalanche_int.h
---- linux-2.4.30/include/asm-mips/ar7/avalanche_int.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/avalanche_int.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,298 @@
-+/* $Id$
-+ *
-+ * avalancheint.h
-+ *
-+ * Jeff Harrell, jharrell@ti.com
-+ * Copyright (C) 2000,2001 Texas Instruments , Inc.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Defines for the AVALANCHE interrupt controller.
-+ *
-+ */
-+#ifndef _MIPS_AVALANCHEINT_H
-+#define _MIPS_AVALANCHEINT_H
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = state->baud_base / baud;
++#endif
+ cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ cval >>= 8;
+diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile
+--- linux.old/drivers/char/ticfg/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/Makefile 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,6 @@
+
-+#include <linux/config.h>
++O_TARGET := ticfg.o
+
-+/* Avalanche Interrupt number */
-+#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
-+/* Linux Interrupt number */
-+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
-+/* Number of IRQ supported on hw interrupt 0. */
++obj-$(CONFIG_AR7_ADAM2) := adam2_env.o
+
-+//#define SEADINT_UART0 3 /* TTYS0 interrupt on SEAD */
-+//#define SEADINT_UART1 4 /* TTYS1 interrupt on SEAD */
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c
+--- linux.old/drivers/char/ticfg/adam2_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/adam2_env.c 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,85 @@
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/fcntl.h>
++#include <linux/init.h>
+
++#include <asm/ar7/adam2_env.h>
+
-+#define MIPS_EXCEPTION_OFFSET 8
-+#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET)
-+#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET)
++#undef ADAM2_ENV_DEBUG
+
-+#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
-+#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
++#ifdef ADAM2_ENV_DEBUG
++#define DPRINTK(args...) do { printk(args); } while(0);
++#else
++#define DPRINTK(args...) do { } while(0);
++#endif
+
++#define ADAM2_ENV_DIR "ticfg"
++#define ADAM2_ENV_NAME "env"
+
-+#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + AVINTNUM(AVALANCHE_INT_END_SECONDARY) \
-+ + MIPS_EXCEPTION_OFFSET - 1)
++static struct proc_dir_entry *adam2_env_proc_dir;
++static struct proc_dir_entry *adam2_env_proc_ent;
+
-+struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++static int
++adam2_proc_read_env(char *page, char **start, off_t pos, int count,
++ int *eof, void *data)
+{
-+ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 */ /* 0x00 */
-+ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 */ /* 0x04 */
-+ volatile unsigned long unused1; /* 0x08 */
-+ volatile unsigned long unused2; /* 0x0C */
-+ volatile unsigned long intcr1; /* Interrupt Clear Register 1 */ /* 0x10 */
-+ volatile unsigned long intcr2; /* Interrupt Clear Register 2 */ /* 0x14 */
-+ volatile unsigned long unused3; /* 0x18 */
-+ volatile unsigned long unused4; /* 0x1C */
-+ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 */ /* 0x20 */
-+ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 */ /* 0x24 */
-+ volatile unsigned long unused5; /* 0x28 */
-+ volatile unsigned long unused6; /* 0x2C */
-+ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 */ /* 0x30 */
-+ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 */ /* 0x34 */
-+ volatile unsigned long unused7; /* 0x38 */
-+ volatile unsigned long unused8; /* 0x3c */
-+ volatile unsigned long pintir; /* Priority Interrupt Index Register */ /* 0x40 */
-+ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg.*/ /* 0x44 */
-+ volatile unsigned long unused9; /* 0x48 */
-+ volatile unsigned long unused10; /* 0x4C */
-+ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 1*/ /* 0x50 */
-+ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 2*/ /* 0x54 */
-+};
++ int len;
++ t_env_var *env;
+
-+struct avalanche_exctrl_regs /* Avalanche Exception control registers */
-+{
-+ volatile unsigned long exsr; /* Exceptions Status/Set register */ /* 0x80 */
-+ volatile unsigned long reserved; /* 0x84 */
-+ volatile unsigned long excr; /* Exceptions Clear Register */ /* 0x88 */
-+ volatile unsigned long reserved1; /* 0x8c */
-+ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) */ /* 0x90 */
-+ volatile unsigned long reserved2; /* 0x94 */
-+ volatile unsigned long exiecr; /* Exceptions Interrupt Enable (clear)*/ /* 0x98 */
-+};
++ if (pos > 0)
++ return 0;
+
-+struct avalanche_channel_int_number
-+{
-+ volatile unsigned long cintnr0; /* Channel Interrupt Number Register */ /* 0x200 */
-+ volatile unsigned long cintnr1; /* Channel Interrupt Number Register */ /* 0x204 */
-+ volatile unsigned long cintnr2; /* Channel Interrupt Number Register */ /* 0x208 */
-+ volatile unsigned long cintnr3; /* Channel Interrupt Number Register */ /* 0x20C */
-+ volatile unsigned long cintnr4; /* Channel Interrupt Number Register */ /* 0x210 */
-+ volatile unsigned long cintnr5; /* Channel Interrupt Number Register */ /* 0x214 */
-+ volatile unsigned long cintnr6; /* Channel Interrupt Number Register */ /* 0x218 */
-+ volatile unsigned long cintnr7; /* Channel Interrupt Number Register */ /* 0x21C */
-+ volatile unsigned long cintnr8; /* Channel Interrupt Number Register */ /* 0x220 */
-+ volatile unsigned long cintnr9; /* Channel Interrupt Number Register */ /* 0x224 */
-+ volatile unsigned long cintnr10; /* Channel Interrupt Number Register */ /* 0x228 */
-+ volatile unsigned long cintnr11; /* Channel Interrupt Number Register */ /* 0x22C */
-+ volatile unsigned long cintnr12; /* Channel Interrupt Number Register */ /* 0x230 */
-+ volatile unsigned long cintnr13; /* Channel Interrupt Number Register */ /* 0x234 */
-+ volatile unsigned long cintnr14; /* Channel Interrupt Number Register */ /* 0x238 */
-+ volatile unsigned long cintnr15; /* Channel Interrupt Number Register */ /* 0x23C */
-+ volatile unsigned long cintnr16; /* Channel Interrupt Number Register */ /* 0x240 */
-+ volatile unsigned long cintnr17; /* Channel Interrupt Number Register */ /* 0x244 */
-+ volatile unsigned long cintnr18; /* Channel Interrupt Number Register */ /* 0x248 */
-+ volatile unsigned long cintnr19; /* Channel Interrupt Number Register */ /* 0x24C */
-+ volatile unsigned long cintnr20; /* Channel Interrupt Number Register */ /* 0x250 */
-+ volatile unsigned long cintnr21; /* Channel Interrupt Number Register */ /* 0x254 */
-+ volatile unsigned long cintnr22; /* Channel Interrupt Number Register */ /* 0x358 */
-+ volatile unsigned long cintnr23; /* Channel Interrupt Number Register */ /* 0x35C */
-+ volatile unsigned long cintnr24; /* Channel Interrupt Number Register */ /* 0x260 */
-+ volatile unsigned long cintnr25; /* Channel Interrupt Number Register */ /* 0x264 */
-+ volatile unsigned long cintnr26; /* Channel Interrupt Number Register */ /* 0x268 */
-+ volatile unsigned long cintnr27; /* Channel Interrupt Number Register */ /* 0x26C */
-+ volatile unsigned long cintnr28; /* Channel Interrupt Number Register */ /* 0x270 */
-+ volatile unsigned long cintnr29; /* Channel Interrupt Number Register */ /* 0x274 */
-+ volatile unsigned long cintnr30; /* Channel Interrupt Number Register */ /* 0x278 */
-+ volatile unsigned long cintnr31; /* Channel Interrupt Number Register */ /* 0x27C */
-+ volatile unsigned long cintnr32; /* Channel Interrupt Number Register */ /* 0x280 */
-+ volatile unsigned long cintnr33; /* Channel Interrupt Number Register */ /* 0x284 */
-+ volatile unsigned long cintnr34; /* Channel Interrupt Number Register */ /* 0x288 */
-+ volatile unsigned long cintnr35; /* Channel Interrupt Number Register */ /* 0x28C */
-+ volatile unsigned long cintnr36; /* Channel Interrupt Number Register */ /* 0x290 */
-+ volatile unsigned long cintnr37; /* Channel Interrupt Number Register */ /* 0x294 */
-+ volatile unsigned long cintnr38; /* Channel Interrupt Number Register */ /* 0x298 */
-+ volatile unsigned long cintnr39; /* Channel Interrupt Number Register */ /* 0x29C */
-+};
++ len=0;
++ for (env = prom_iterenv(0); env; env = prom_iterenv(env)) {
++ if (env->val) {
++ /* XXX check for page len */
++ len += sprintf(page + len, "%s\t%s\n",
++ env->name, env->val);
++ }
++ }
+
-+struct avalanche_interrupt_line_to_channel
++ *eof=1;
++ return len;
++}
++
++static int __init
++adam2_env_init(void)
+{
-+ unsigned long int_line0; /* Start of primary interrupts */
-+ unsigned long int_line1;
-+ unsigned long int_line2;
-+ unsigned long int_line3;
-+ unsigned long int_line4;
-+ unsigned long int_line5;
-+ unsigned long int_line6;
-+ unsigned long int_line7;
-+ unsigned long int_line8;
-+ unsigned long int_line9;
-+ unsigned long int_line10;
-+ unsigned long int_line11;
-+ unsigned long int_line12;
-+ unsigned long int_line13;
-+ unsigned long int_line14;
-+ unsigned long int_line15;
-+ unsigned long int_line16;
-+ unsigned long int_line17;
-+ unsigned long int_line18;
-+ unsigned long int_line19;
-+ unsigned long int_line20;
-+ unsigned long int_line21;
-+ unsigned long int_line22;
-+ unsigned long int_line23;
-+ unsigned long int_line24;
-+ unsigned long int_line25;
-+ unsigned long int_line26;
-+ unsigned long int_line27;
-+ unsigned long int_line28;
-+ unsigned long int_line29;
-+ unsigned long int_line30;
-+ unsigned long int_line31;
-+ unsigned long int_line32;
-+ unsigned long int_line33;
-+ unsigned long int_line34;
-+ unsigned long int_line35;
-+ unsigned long int_line36;
-+ unsigned long int_line37;
-+ unsigned long int_line38;
-+ unsigned long int_line39;
-+};
+
-+/* Interrupt Line #'s (Avalanche peripherals) */
++ DPRINTK("%s\n", __FUNCTION__);
+
-+/*------------------------------*/
-+/* Avalanche primary interrupts */
-+/*------------------------------*/
-+#define UNIFIED_SECONDARY_INTERRUPT 0
-+#define AVALANCHE_EXT_INT_0 1
-+#define AVALANCHE_EXT_INT_1 2
-+#define AVALANCHE_EXT_INT_2 3
-+#define AVALANCHE_EXT_INT_3 4
-+#define AVALANCHE_TIMER_0_INT 5
-+#define AVALANCHE_TIMER_1_INT 6
-+#define AVALANCHE_UART0_INT 7
-+#define AVALANCHE_UART1_INT 8
-+#define AVALANCHE_PDMA_INT0 9
-+#define AVALANCHE_PDMA_INT1 10
-+#define AVALANCHE_HDLC_TXA 11
-+#define AVALANCHE_HDLC_TXB 12
-+#define AVALANCHE_HDLC_RXA 13
-+#define AVALANCHE_HDLC_RXB 14
-+#define AVALANCHE_ATM_SAR_TXA 15
-+#define AVALANCHE_ATM_SAR_TXB 16
-+#define AVALANCHE_ATM_SAR_RXA 17
-+#define AVALANCHE_ATM_SAR_RXB 18
-+#define AVALANCHE_MAC_TXA 19
-+#define AVALANCHE_MAC_RXA 20
-+#define AVALANCHE_DSP_SUB0 21
-+#define AVALANCHE_DSP_SUB1 22
-+#define AVALANCHE_DES_INT 23
-+#define AVALANCHE_USB_INT 24
-+#define AVALANCHE_PCI_INTA 25
-+#define AVALANCHE_PCI_INTB 26
-+#define AVALANCHE_PCI_INTC 27
-+/* Line #28 Reserved */
-+#define AVALANCHE_I2CM_INT 29
-+#define AVALANCHE_PDMA_INT2 30
-+#define AVALANCHE_PDMA_INT3 31
-+#define AVALANCHE_CODEC 32
-+#define AVALANCHE_MAC_TXB 33
-+#define AVALANCHE_MAC_RXB 34
-+/* Line #35 Reserved */
-+/* Line #36 Reserved */
-+/* Line #37 Reserved */
-+/* Line #38 Reserved */
-+/* Line #39 Reserved */
-+
-+#define DEBUG_MISSED_INTS 1
-+
-+#ifdef DEBUG_MISSED_INTS
-+struct debug_missed_int
-+{
-+ unsigned int atm_sar_txa;
-+ unsigned int atm_sar_txb;
-+ unsigned int atm_sar_rxa;
-+ unsigned int atm_sar_rxb;
-+ unsigned int mac_txa;
-+ unsigned int mac_rxa;
-+ unsigned int mac_txb;
-+ unsigned int mac_rxb;
-+};
-+#endif /* DEBUG_MISSED_INTS */
++ adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL);
++ if (!adam2_env_proc_dir) {
++ printk(KERN_ERR "%s: Unable to create /proc/%s entry\n",
++ __FUNCTION__, ADAM2_ENV_DIR);
++ return -ENOMEM;
++ }
++
++ adam2_env_proc_ent =
++ create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir);
++ if (!adam2_env_proc_ent) {
++ printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n",
++ __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME);
++ remove_proc_entry(ADAM2_ENV_DIR, NULL);
++ return -ENOMEM;
++ }
++ adam2_env_proc_ent->read_proc = adam2_proc_read_env;
+
-+/*-----------------------------------*/
-+/* Avalanche Secondary Interrupts */
-+/*-----------------------------------*/
-+#define PRIMARY_INTS 40
++ return 0;
++}
+
-+#define AVALANCHE_HDLC_STATUS (0 + PRIMARY_INTS)
-+#define AVALANCHE_SAR_STATUS (1 + PRIMARY_INTS)
-+/* Line #02 Reserved */
-+#define AVALANCHE_ETH_MACA_LNK_CHG (3 + PRIMARY_INTS)
-+#define AVALANCHE_ETH_MACA_MGT (4 + PRIMARY_INTS)
-+#define AVALANCHE_PCI_STATUS_INT (5 + PRIMARY_INTS)
-+/* Line #06 Reserved */
-+#define AVALANCHE_EXTERN_MEM_INT (7 + PRIMARY_INTS)
-+#define AVALANCHE_DSP_A_DOG (8 + PRIMARY_INTS)
-+#define AVALANCHE_DSP_B_DOG (9 + PRIMARY_INTS)
-+/* Line #10-#20 Reserved */
-+#define AVALANCHE_ETH_MACB_LNK_CHG (21 + PRIMARY_INTS)
-+#define AVALANCHE_ETH_MACB_MGT (22 + PRIMARY_INTS)
-+#define AVALANCHE_AAL2_STATUS (23 + PRIMARY_INTS)
-+/* Line #24-#31 Reserved */
-+
-+#define AVALANCHEINT_UART0 LNXINTNUM(AVALANCHE_UART0_INT)
-+#define AVALANCHEINT_UART1 LNXINTNUM(AVALANCHE_UART1_INT)
-+#define SEADINT_UART0 3 /* TTYS0 interrupt on SEAD */
-+#define SEADINT_UART1 4 /* TTYS1 interrupt on SEAD */
-+
-+#ifdef JIMK_INT_CTRLR
-+/*-----------------------------------*/
-+/* Jim Kennedy's Interrupt Controller*/
-+/*-----------------------------------*/
++static
++void __exit
++adam2_env_cleanup(void)
++{
++ remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir);
++ remove_proc_entry(ADAM2_ENV_DIR, NULL);
++}
+
-+/* to clear the interrupt write the bit back to the status reg */
++module_init(adam2_env_init);
++module_exit(adam2_env_cleanup);
+
-+#define JIMK_INT_STATUS (*(volatile unsigned int *)(0xA8612400))
-+#define JIMK_INT_MASK (*(volatile unsigned int *)(0xA8612404))
-+#define JIMK_SAR_STATUS (1<<0)
-+#define JIMK_SAR_TX_A (1<<1)
-+#define JIMK_SAR_TX_B (1<<2)
-+#define JIMK_SAR_RX_A (1<<3)
-+#define JIMK_SAR_RX_B (1<<4)
-+#define JIMK_AAL2_STATUS (1<<5)
-+#define JIMK_UART0_INT (1<<11)
++MODULE_LICENSE("GPL");
+diff -urN linux.old/include/asm-mips/addrspace.h linux.dev/include/asm-mips/addrspace.h
+--- linux.old/include/asm-mips/addrspace.h 2002-11-29 00:53:15.000000000 +0100
++++ linux.dev/include/asm-mips/addrspace.h 2005-11-10 01:14:16.400733500 +0100
+@@ -11,6 +11,8 @@
+ #ifndef __ASM_MIPS_ADDRSPACE_H
+ #define __ASM_MIPS_ADDRSPACE_H
+
++#include <linux/config.h>
+
-+#ifdef SEAD_USB_DEVELOPMENT
-+#define JIMK_USB_INT (1<<0)
-+#endif /* SEAD_USB_DEVELOPMENT */
+ /*
+ * Configure language
+ */
+@@ -102,4 +104,11 @@
+ #define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
+ #define PHYS_TO_XKPHYS(cm,a) (0x8000000000000000 | ((cm)<<59) | (a))
+
++#ifdef CONFIG_AR7_MEMORY
++#define PHYS_OFFSET ((unsigned long)(CONFIG_AR7_MEMORY))
++#else
++#define PHYS_OFFSET (0)
++#endif
++#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
+
-+#endif /* JIMK_INT_CTRLR */
+ #endif /* __ASM_MIPS_ADDRSPACE_H */
+diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h
+--- linux.old/include/asm-mips/ar7/adam2_env.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/adam2_env.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,13 @@
++#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_
++#define _INCLUDE_ASM_AR7_ADAM2_ENV_H_
+
-+extern void avalanche_int_set(int channel, int line);
-+extern void avalancheint_init(void);
++/* Environment variable */
++typedef struct {
++ char *name;
++ char *val;
++} t_env_var;
++
++char *prom_getenv(char *);
++t_env_var *prom_iterenv(t_env_var *);
+
++#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */
+diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h
+--- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/ar7.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,33 @@
++/*
++ * $Id$
++ * Copyright (C) $Date$ $Author$
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ *
++ */
+
-+#endif /* !(_MIPS_AVALANCHEINT_H) */
++#ifndef _AR7_H
++#define _AR7_H
+
++#include <asm/addrspace.h>
++#include <linux/config.h>
+
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY))
+
++#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00))
++#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00))
++#define AR7_BASE_BAUD ( 3686400 / 16 )
+
-diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_intc.h linux-2.4.30.dev/include/asm-mips/ar7/avalanche_intc.h
---- linux-2.4.30/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/avalanche_intc.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,273 @@
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h
+--- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,292 @@
+ /*
+ * Nitin Dhingra, iamnd@ti.com
+ * Copyright (C) 2000 Texas Instruments Inc.
+#ifndef _AVALANCHE_INTC_H
+#define _AVALANCHE_INTC_H
+
++#include <linux/config.h>
++
++/* ----- */
++
++#define KSEG1_BASE 0xA0000000
++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400)
++
++/* ----- */
++
+#define MIPS_EXCEPTION_OFFSET 8
+
+/******************************************************************************
+#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
+#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
+
++#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
++ AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \
++ MIPS_EXCEPTION_OFFSET)
+
-+#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
-+ AVINTNUM(AVALANCHE_INT_END_SECONDARY) \
-+ + MIPS_EXCEPTION_OFFSET - 1) /* Suraj, check */
++#if defined(CONFIG_AR7_VLYNQ)
++#define AVALANCHE_INT_END_LOW_VLYNQ (AVALANCHE_INTC_END + 32)
++#define AVALANCHE_INT_END_VLYNQ (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#define AVALANCHE_INT_END AVALANCHE_INT_END_VLYNQ
++#else
++#define AVALANCHE_INT_END AVALANCHE_INTC_END
++#endif
+
+
+/*
+
+
+#endif /* _AVALANCHE_INTC_H */
-diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_prom.h linux-2.4.30.dev/include/asm-mips/ar7/avalanche_prom.h
---- linux-2.4.30/include/asm-mips/ar7/avalanche_prom.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/avalanche_prom.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,54 @@
-+/* $Id$
-+ *
-+ * prom.h
-+ *
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999 MIPS Technologies, Inc.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Sead bootprom interface for the Linux kernel.
-+ *
-+ */
+diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h
+--- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,174 @@
++#ifndef _AVALANCHE_MISC_H_
++#define _AVALANCHE_MISC_H_
++
++typedef enum AVALANCHE_ERR_t
++{
++ AVALANCHE_ERR_OK = 0, /* OK or SUCCESS */
++ AVALANCHE_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
+
-+#ifndef _MIPS_PROM_H
-+#define _MIPS_PROM_H
-+
-+extern char *prom_getcmdline(void);
-+extern char *prom_getenv(char *name);
-+extern void setup_prom_printf(void);
-+extern void prom_printf(char *fmt, ...);
-+extern void prom_init_cmdline(void);
-+extern void prom_meminit(void);
-+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
-+extern void prom_free_prom_memory (void);
-+extern void sead_display_message(const char *str);
-+extern void sead_display_word(unsigned int num);
-+extern int get_ethernet_addr(char *ethernet_addr);
-+
-+/* Memory descriptor management. */
-+#define PROM_MAX_PMEMBLOCKS 32
-+struct prom_pmemblock {
-+ unsigned long base; /* Within KSEG0. */
-+ unsigned int size; /* In bytes. */
-+ unsigned int type; /* free or prom memory */
-+};
++ /* Pointers and args */
++ AVALANCHE_ERR_INVARG = -2, /* Invaild argument to the call */
++ AVALANCHE_ERR_NULLPTR = -3, /* NULL pointer */
++ AVALANCHE_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
++
++ /* Memory issues */
++ AVALANCHE_ERR_ALLOC_FAIL = -10, /* allocation failed */
++ AVALANCHE_ERR_FREE_FAIL = -11, /* free failed */
++ AVALANCHE_ERR_MEM_CORRUPT = -12, /* corrupted memory */
++ AVALANCHE_ERR_BUF_LINK = -13, /* buffer linking failed */
++
++ /* Device issues */
++ AVALANCHE_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
++ AVALANCHE_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
++
++ AVALANCHE_ERR_INVID = -30 /* Invalid ID */
++
++} AVALANCHE_ERR;
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_RESET_MODULE_tag
++{
++ RESET_MODULE_UART0 = 0,
++ RESET_MODULE_UART1 = 1,
++ RESET_MODULE_I2C = 2,
++ RESET_MODULE_TIMER0 = 3,
++ RESET_MODULE_TIMER1 = 4,
++ RESET_MODULE_GPIO = 6,
++ RESET_MODULE_ADSLSS = 7,
++ RESET_MODULE_USBS = 8,
++ RESET_MODULE_SAR = 9,
++ RESET_MODULE_VDMA_VT = 11,
++ RESET_MODULE_FSER = 12,
++ RESET_MODULE_VLYNQ1 = 16,
++ RESET_MODULE_EMAC0 = 17,
++ RESET_MODULE_DMA = 18,
++ RESET_MODULE_BIST = 19,
++ RESET_MODULE_VLYNQ0 = 20,
++ RESET_MODULE_EMAC1 = 21,
++ RESET_MODULE_MDIO = 22,
++ RESET_MODULE_ADSLSS_DSP = 23,
++ RESET_MODULE_EPHY = 26
++} AVALANCHE_RESET_MODULE_T;
++
++typedef enum AVALANCHE_RESET_CTRL_tag
++{
++ IN_RESET = 0,
++ OUT_OF_RESET
++} AVALANCHE_RESET_CTRL_T;
++
++typedef enum AVALANCHE_SYS_RST_MODE_tag
++{
++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RST_MODE_T;
++
++typedef enum AVALANCHE_SYS_RESET_STATUS_tag
++{
++ HARDWARE_RESET = 0,
++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
++ WATCHDOG_RESET,
++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RESET_STATUS_T;
++
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module);
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode);
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void);
++
++typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_POWER_CTRL_tag
++{
++ POWER_CTRL_POWER_UP = 0,
++ POWER_CTRL_POWER_DOWN
++} AVALANCHE_POWER_CTRL_T;
++
++typedef enum AVALANCHE_SYS_POWER_MODE_tag
++{
++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
++} AVALANCHE_SYS_POWER_MODE_T;
++
++void avalanche_power_ctrl(unsigned int power_module, AVALANCHE_POWER_CTRL_T power_ctrl);
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module);
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode);
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag
++{
++ WAKEUP_INT0 = 1,
++ WAKEUP_INT1 = 2,
++ WAKEUP_INT2 = 4,
++ WAKEUP_INT3 = 8
++} AVALANCHE_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETV1050_WAKEUP_CTRL_tag
++{
++ WAKEUP_DISABLED = 0,
++ WAKEUP_ENABLED
++} AVALANCHE_WAKEUP_CTRL_T;
++
++typedef enum TNETV1050_WAKEUP_POLARITY_tag
++{
++ WAKEUP_ACTIVE_HIGH = 0,
++ WAKEUP_ACTIVE_LOW
++} AVALANCHE_WAKEUP_POLARITY_T;
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_GPIO_PIN_MODE_tag
++{
++ FUNCTIONAL_PIN = 0,
++ GPIO_PIN = 1
++} AVALANCHE_GPIO_PIN_MODE_T;
++
++typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag
++{
++ GPIO_OUTPUT_PIN = 0,
++ GPIO_INPUT_PIN = 1
++} AVALANCHE_GPIO_PIN_DIRECTION_T;
++
++typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T;
+
++void avalanche_gpio_init(void);
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value);
++int avalanche_gpio_in_bit(unsigned int gpio_pin);
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index);
+
-+#endif /* !(_MIPS_PROM_H) */
++unsigned int avalanche_get_chip_version_info(void);
+
-diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_regs.h linux-2.4.30.dev/include/asm-mips/ar7/avalanche_regs.h
---- linux-2.4.30/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/avalanche_regs.h 2005-06-14 15:36:59.000000000 +0200
++unsigned int avalanche_get_vbus_freq(void);
++void avalanche_set_vbus_freq(unsigned int);
++
++
++typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation);
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation);
++unsigned int avalanche_is_mdix_on_chip(void);
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h
+--- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-11-10 01:10:46.071588750 +0100
@@ -0,0 +1,567 @@
+/*
+ * $Id$
+#define VMAC_RCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000218))
+#define VMAC_RXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000021c))
+
-+#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220))
-+#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224))
-+#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228))
-+#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C))
-+#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230))
-+#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234))
-+#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238))
-+#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C))
-+#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240))
-+#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244))
-+#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248))
-+#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C))
-+
-+#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280))
-+#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284))
-+#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288))
-+#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C))
-+
-+#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300))
-+#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304))
-+#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308))
-+#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C))
-+#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310))
-+#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314))
-+
-+#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
-+#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344))
-+#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348))
-+#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C))
-+
-+#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380))
-+#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
-+#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388))
-+#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C))
-+#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390))
++#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220))
++#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224))
++#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228))
++#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C))
++#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230))
++#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234))
++#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238))
++#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C))
++#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240))
++#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244))
++#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248))
++#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C))
++
++#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280))
++#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284))
++#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288))
++#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C))
++
++#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300))
++#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304))
++#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308))
++#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C))
++#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310))
++#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344))
++#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348))
++#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C))
++
++#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380))
++#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
++#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388))
++#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C))
++#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390))
++
++#define VMAC_STATS_BASE(X) (X + 0x00000400)
++
++#endif __AVALANCHE_REGS_H
++
++
++
++
++
++
+diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h
+--- linux.old/include/asm-mips/ar7/avalanche_types.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_types.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,126 @@
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++#ifndef _avalanche_types_h_
++#define _avalanche_types_h_
++
++/*--- #include <asm/avalanche/generic/hal_modules/haltypes.h> ---*/
++#ifndef TRUE
++#define TRUE 1
++#endif
++#ifndef FALSE
++#define FALSE 0
++#endif
++#ifndef NULL
++#define NULL (void *)0
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++ * Typen für Texas GPL Module
++\*------------------------------------------------------------------------------------------*/
++#ifndef __UINT8_T__
++typedef unsigned char UINT8;
++#define __UINT8_T__
++#endif
++
++#ifndef __UCHAR_T__
++typedef unsigned char UCHAR;
++#define __UCHAR_T__
++#endif
++
++#ifndef __INT8_T__
++typedef signed char INT8;
++#define __INT8_T__
++#endif
++
++#ifndef __UINT16_T__
++typedef unsigned short UINT16;
++#define __UINT16_T__
++#endif
++
++#ifndef __USHORT_T__
++typedef unsigned short USHORT;
++#define __USHORT_T__
++#endif
++
++#ifndef __INT16_T__
++typedef signed short INT16;
++#define __INT16_T__
++#endif
++
++#ifndef __UINT32_T__
++typedef unsigned int UINT32;
++#define __UINT32_T__
++#endif
++
++#ifndef __UINT_T__
++typedef unsigned int UINT;
++#define __UINT_T__
++#endif
++
++#ifndef __INT32_T__
++typedef signed int INT32;
++#define __INT32_T__
++#endif
++
++#ifndef __ULONG_T__
++typedef unsigned long ULONG;
++#define __ULONG_T__
++#endif
++
++#ifndef __BOOL_T__
++typedef int BOOL;
++#define __BOOL_T__
++#endif
++
++#ifndef __STATUS_T__
++typedef int STATUS;
++#define __STATUS_T__
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *);
++typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32);
++typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32);
++typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *);
++typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *);
++typedef void (*p_vlynq_root_isr_t)(void *);
++typedef void (*p_vlynq_delay_t)(UINT32);
++typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32);
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set;
++extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl;
++extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count;
++extern p_vlynq_install_isr_t p_vlynq_install_isr;
++extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr;
++extern p_vlynq_root_isr_t p_vlynq_root_isr;
++extern p_vlynq_delay_t p_vlynq_delay;
++extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map;
++extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity;
++extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity;
++extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type;
++extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type;
++extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable;
++extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable;
++extern void *p_vlynqDevice0;
++extern void *p_vlynqDevice1;
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++enum _avalanche_need_ {
++ avalanche_need_vlynq,
++ avalanche_need_auto_mdix
++};
++
++int avalanche_need(enum _avalanche_need_);
++
++#endif /*--- #ifndef _avalanche_types_h_ ---*/
+diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h
+--- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/if_port.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,26 @@
++/*******************************************************************************
++ * FILE PURPOSE: Interface port id Header file
++ *******************************************************************************
++ * FILE NAME: if_port.h
++ *
++ * DESCRIPTION: Header file carrying information about port ids of interfaces
++ *
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ ******************************************************************************/
++#ifndef _IF_PORT_H_
++#define _IF_PORT_H_
++
++#define AVALANCHE_CPMAC_LOW_PORT_ID 0
++#define AVALANCHE_CPMAC_HIGH_PORT_ID 1
++#define AVALANCHE_USB_PORT_ID 2
++#define AVALANCHE_WLAN_PORT_ID 3
++
++
++#define AVALANCHE_MARVELL_BASE_PORT_ID 4
++
++/* The marvell ports occupy port ids from 4 to 8 */
++/* so the next port id number should start at 9 */
++
++
++#endif /* _IF_PORT_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h
+--- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,180 @@
++#ifndef _SANGAM_H_
++#define _SANGAM_H_
++
++#include <linux/config.h>
++#include <asm/addrspace.h>
++
++/*----------------------------------------------------
++ * Sangam's Module Base Addresses
++ *--------------------------------------------------*/
++#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */
++#define AVALANCHE_BROADBAND_INTERFACE__BASE (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */
++#define AVALANCHE_ATM_SAR_BASE (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */
++#define AVALANCHE_USB_SLAVE_BASE (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */
++#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */
++#define AVALANCHE_LOW_CPMAC_BASE (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */
++#define AVALANCHE_EMIF_CONTROL_BASE (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */
++#define AVALANCHE_GPIO_BASE (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */
++#define AVALANCHE_CLOCK_CONTROL_BASE (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */
++#define AVALANCHE_WATCHDOG_TIMER_BASE (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */
++#define AVALANCHE_TIMER0_BASE (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */
++#define AVALANCHE_TIMER1_BASE (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */
++#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_I2C_BASE (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */
++#define AVALANCHE_USB_SLAVE_CONTROL_BASE (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */
++#define AVALANCHE_MCDMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */
++#define AVALANCHE_RESET_CONTROL_BASE (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */
++#define AVALANCHE_BIST_CONTROL_BASE (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */
++#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */
++#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */
++#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */
++#define AVALANCHE_MDIO_BASE (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO */
++#define AVALANCHE_FSER_BASE (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */
++#define AVALANCHE_INTC_BASE (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC */
++#define AVALANCHE_HIGH_CPMAC_BASE (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */
++#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */
++
++#define AVALANCHE_SDRAM_BASE 0x14000000UL
++
++
++/*----------------------------------------------------
++ * Sangam Interrupt Map (Primary Interrupts)
++ *--------------------------------------------------*/
++
++#define AVALANCHE_UNIFIED_SECONDARY_INT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++/* Line# 3 to 4 are reserved */
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_DMA_INT0 9
++#define AVALANCHE_DMA_INT1 10
++/* Line# 11 to 14 are reserved */
++#define AVALANCHE_ATM_SAR_INT 15
++/* Line# 16 to 18 are reserved */
++#define AVALANCHE_LOW_CPMAC_INT 19
++/* Line# 20 is reserved */
++#define AVALANCHE_LOW_VLYNQ_INT 21
++#define AVALANCHE_CODEC_WAKEUP_INT 22
++/* Line# 23 is reserved */
++#define AVALANCHE_USB_SLAVE_INT 24
++#define AVALANCHE_HIGH_VLYNQ_INT 25
++/* Line# 26 to 27 are reserved */
++#define AVALANCHE_UNIFIED_PHY_INT 28
++#define AVALANCHE_I2C_INT 29
++#define AVALANCHE_DMA_INT2 30
++#define AVALANCHE_DMA_INT3 31
++/* Line# 32 is reserved */
++#define AVALANCHE_HIGH_CPMAC_INT 33
++/* Line# 34 to 36 is reserved */
++#define AVALANCHE_VDMA_VT_RX_INT 37
++#define AVALANCHE_VDMA_VT_TX_INT 38
++#define AVALANCHE_ADSL_SUB_SYSTEM_INT 39
++
++
++#define AVALANCHE_EMIF_INT 47
++
++
++
++/*-----------------------------------------------------------
++ * Sangam's Reset Bits
++ *---------------------------------------------------------*/
++
++#define AVALANCHE_UART0_RESET_BIT 0
++#define AVALANCHE_UART1_RESET_BIT 1
++#define AVALANCHE_I2C_RESET_BIT 2
++#define AVALANCHE_TIMER0_RESET_BIT 3
++#define AVALANCHE_TIMER1_RESET_BIT 4
++/* Reset bit 5 is reserved. */
++#define AVALANCHE_GPIO_RESET_BIT 6
++#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT 7
++#define AVALANCHE_USB_SLAVE_RESET_BIT 8
++#define AVALANCHE_ATM_SAR_RESET_BIT 9
++/* Reset bit 10 is reserved. */
++#define AVALANCHE_VDMA_VT_RESET_BIT 11
++#define AVALANCHE_FSER_RESET_BIT 12
++/* Reset bit 13 to 15 are reserved */
++#define AVALANCHE_HIGH_VLYNQ_RESET_BIT 16
++#define AVALANCHE_LOW_CPMAC_RESET_BIT 17
++#define AVALANCHE_MCDMA_RESET_BIT 18
++#define AVALANCHE_BIST_RESET_BIT 19
++#define AVALANCHE_LOW_VLYNQ_RESET_BIT 20
++#define AVALANCHE_HIGH_CPMAC_RESET_BIT 21
++#define AVALANCHE_MDIO_RESET_BIT 22
++#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT 23
++/* Reset bit 24 to 25 are reserved */
++#define AVALANCHE_LOW_EPHY_RESET_BIT 26
++/* Reset bit 27 to 31 are reserved */
++
++
++#define AVALANCHE_POWER_MODULE_USBSP 0
++#define AVALANCHE_POWER_MODULE_WDTP 1
++#define AVALANCHE_POWER_MODULE_UT0P 2
++#define AVALANCHE_POWER_MODULE_UT1P 3
++#define AVALANCHE_POWER_MODULE_IICP 4
++#define AVALANCHE_POWER_MODULE_VDMAP 5
++#define AVALANCHE_POWER_MODULE_GPIOP 6
++#define AVALANCHE_POWER_MODULE_VLYNQ1P 7
++#define AVALANCHE_POWER_MODULE_SARP 8
++#define AVALANCHE_POWER_MODULE_ADSLP 9
++#define AVALANCHE_POWER_MODULE_EMIFP 10
++#define AVALANCHE_POWER_MODULE_ADSPP 12
++#define AVALANCHE_POWER_MODULE_RAMP 13
++#define AVALANCHE_POWER_MODULE_ROMP 14
++#define AVALANCHE_POWER_MODULE_DMAP 15
++#define AVALANCHE_POWER_MODULE_BISTP 16
++#define AVALANCHE_POWER_MODULE_TIMER0P 18
++#define AVALANCHE_POWER_MODULE_TIMER1P 19
++#define AVALANCHE_POWER_MODULE_EMAC0P 20
++#define AVALANCHE_POWER_MODULE_EMAC1P 22
++#define AVALANCHE_POWER_MODULE_EPHYP 24
++#define AVALANCHE_POWER_MODULE_VLYNQ0P 27
++
++
++
++
++
++/*
++ * Sangam board vectors
++ */
++
++#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
++
++/*-----------------------------------------------------------------------------
++ * Sangam's system register.
++ *
++ *---------------------------------------------------------------------------*/
++#define AVALANCHE_DCL_BOOTCR (KSEG1ADDR(0x08611A00))
++#define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
++#define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600))
++#define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604))
++#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600))
++
++#define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00))
++#define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C))
++
++#define AVALANCHE_GPIO_DATA_IN (AVALANCHE_GPIO_BASE + 0x0)
++#define AVALANCHE_GPIO_DATA_OUT (AVALANCHE_GPIO_BASE + 0x4)
++#define AVALANCHE_GPIO_DIR (AVALANCHE_GPIO_BASE + 0x8)
++#define AVALANCHE_GPIO_ENBL (AVALANCHE_GPIO_BASE + 0xC)
++#define AVALANCHE_CVR (AVALANCHE_GPIO_BASE + 0x14)
++
++/*
++ * Yamon Prom print address.
++ */
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
++#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++
++#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
++
++#define AVALANCHE_GPIO_PIN_COUNT 32
++#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0}
++
++#include "sangam_boards.h"
++
++#endif /*_SANGAM_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h
+--- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,77 @@
++#ifndef _SANGAM_BOARDS_H
++#define _SANGAM_BOARDS_H
++
++// Let us define board specific information here.
++
++
++#if defined(CONFIG_AR7DB)
++
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++
++#endif
++
++
++#if defined(CONFIG_AR7RD)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WI)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7V)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
+
-+#define VMAC_STATS_BASE(X) (X + 0x00000400)
+
++#if defined(CONFIG_AR7WRD)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
+#endif
+
+
++#if defined(CONFIG_AR7VWI)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
+
+
++#if defined CONFIG_SEAD2
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
++#include <asm/mips-boards/sead.h>
++#endif
+
+
-diff -urN linux-2.4.30/include/asm-mips/ar7/tnetd73xx.h linux-2.4.30.dev/include/asm-mips/ar7/tnetd73xx.h
---- linux-2.4.30/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/tnetd73xx.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,340 @@
++#endif
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,338 @@
+/******************************************************************************
+ * FILE PURPOSE: TNETD73xx Common Header File
+ ******************************************************************************
+
+#ifndef _ASMLANGUAGE /* This part not for assembly language */
+
-+#include <linux/types.h>
-+
+extern unsigned int tnetd73xx_mips_freq;
+extern unsigned int tnetd73xx_vbus_freq;
+
+#endif
+
+#ifndef KSEG0
-+#define KSEG0(addr) (((u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
++#define KSEG0(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
+#endif
+
+#ifndef KSEG1
-+#define KSEG1(addr) (((u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
++#define KSEG1(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
+#endif
+
+#ifndef KUSEG
-+#define KUSEG(addr) ((u32)(addr) & ~KSEG_MSK)
++#define KUSEG(addr) ((__u32)(addr) & ~KSEG_MSK)
+#endif
+
+#ifndef PHYS_ADDR
+#endif
+
+#ifndef REG8_ADDR
-+#define REG8_ADDR(addr) (volatile u8 *)(PHYS_TO_K1(addr))
-+#define REG8_DATA(addr) (*(volatile u8 *)(PHYS_TO_K1(addr)))
++#define REG8_ADDR(addr) (volatile __u8 *)(PHYS_TO_K1(addr))
++#define REG8_DATA(addr) (*(volatile __u8 *)(PHYS_TO_K1(addr)))
+#define REG8_WRITE(addr, data) REG8_DATA(addr) = data;
-+#define REG8_READ(addr, data) data = (u8) REG8_DATA(addr);
++#define REG8_READ(addr, data) data = (__u8) REG8_DATA(addr);
+#endif
+
+#ifndef REG16_ADDR
-+#define REG16_ADDR(addr) (volatile u16 *)(PHYS_TO_K1(addr))
-+#define REG16_DATA(addr) (*(volatile u16 *)(PHYS_TO_K1(addr)))
++#define REG16_ADDR(addr) (volatile __u16 *)(PHYS_TO_K1(addr))
++#define REG16_DATA(addr) (*(volatile __u16 *)(PHYS_TO_K1(addr)))
+#define REG16_WRITE(addr, data) REG16_DATA(addr) = data;
-+#define REG16_READ(addr, data) data = (u16) REG16_DATA(addr);
++#define REG16_READ(addr, data) data = (__u16) REG16_DATA(addr);
+#endif
+
+#ifndef REG32_ADDR
-+#define REG32_ADDR(addr) (volatile u32 *)(PHYS_TO_K1(addr))
-+#define REG32_DATA(addr) (*(volatile u32 *)(PHYS_TO_K1(addr)))
++#define REG32_ADDR(addr) (volatile __u32 *)(PHYS_TO_K1(addr))
++#define REG32_DATA(addr) (*(volatile __u32 *)(PHYS_TO_K1(addr)))
+#define REG32_WRITE(addr, data) REG32_DATA(addr) = data;
-+#define REG32_READ(addr, data) data = (u32) REG32_DATA(addr);
++#define REG32_READ(addr, data) data = (__u32) REG32_DATA(addr);
+#endif
+
+#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */
+
+
+#endif /* __TNETD73XX_H_ */
-diff -urN linux-2.4.30/include/asm-mips/ar7/tnetd73xx_err.h linux-2.4.30.dev/include/asm-mips/ar7/tnetd73xx_err.h
---- linux-2.4.30/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-06-14 15:36:59.000000000 +0200
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-11-10 01:10:46.075589000 +0100
@@ -0,0 +1,42 @@
+/******************************************************************************
+ * FILE PURPOSE: TNETD73xx Error Definations Header File
+} TNETD73XX_ERR;
+
+#endif /* __TNETD73XX_ERR_H__ */
-diff -urN linux-2.4.30/include/asm-mips/ar7/tnetd73xx_misc.h linux-2.4.30.dev/include/asm-mips/ar7/tnetd73xx_misc.h
---- linux-2.4.30/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-06-14 15:36:59.000000000 +0200
-@@ -0,0 +1,243 @@
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,239 @@
+/******************************************************************************
+ * FILE PURPOSE: TNETD73xx Misc modules API Header
+ ******************************************************************************
+#ifndef __TNETD73XX_MISC_H__
+#define __TNETD73XX_MISC_H__
+
-+#include <linux/types.h>
-+
-+#define BOOTCR_MIPS_ASYNC_MODE (1 << 25)
-+
+/*****************************************************************************
+ * Reset Control Module
+ *****************************************************************************/
+ CLKC_ADSLSS
+} TNETD73XX_CLKC_ID_T;
+
-+void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in);
-+TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, u32 output_freq);
-+u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
++void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in);
++TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq);
++__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
+
+/*****************************************************************************
+ * GPIO Control
+int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
+
+/* TNETD73XX Revision */
-+u32 tnetd73xx_get_revision(void);
++__u32 tnetd73xx_get_revision(void);
+
+#endif /* __TNETD73XX_MISC_H__ */
-diff -urN linux-2.4.30/include/asm-mips/io.h linux-2.4.30.dev/include/asm-mips/io.h
---- linux-2.4.30/include/asm-mips/io.h 2005-06-14 18:42:07.000000000 +0200
-+++ linux-2.4.30.dev/include/asm-mips/io.h 2005-06-14 15:36:59.000000000 +0200
-@@ -63,8 +63,12 @@
+diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h
+--- linux.old/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,610 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.h
++ * Description :
++ * This header file provides the set of functions exported by the
++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ * ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG
++
++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)
++#else
++#define debugPrint(format,args...)
++#endif
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR 0x08
++
++#define VLYNQ_CLK_DIV_MAX 0x08
++#define VLYNQ_CLK_DIV_MIN 0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++/* Error defines */
++#define VLYNQ_SUCCESS 0
++
++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
++
++/* Vlynq Defines and Macros */
++
++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */
++
++/* Base address of module */
++#define VLYNQ_BASE (pdev->module_base)
++
++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080
++
++#define VLYNQ_REV_OFFSET 0x0000
++#define VLYNQ_CTRL_OFFSET 0x0004
++#define VLYNQ_STATUS_OFFSET 0x0008
++#define VLYNQ_INT_STAT_OFFSET 0x0010
++#define VLYNQ_INT_PEND_OFFSET 0x0014
++#define VLYNQ_INT_PTR_OFFSET 0x0018
++#define VLYNQ_TXMAP_OFFSET 0x001c
++
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024
++
++#define VLYNQ_CHIP_VER_OFFSET 0x0040
++#define VLYNQ_IVR_REGS_OFFSET 0x0060
++
++#define VLYNQ_INT_PENDING_REG_PTR 0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14
++
++#define VLYNQ_REV_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
++
++#define VLYNQ_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
++
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
++
++#define VLYNQ_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++
++#define VLYNQ_IVR_INTEN(ivr) (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr) (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr) (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr) (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr) (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
++
++
++
++/*********************************
++ * Remote VLYNQ register set *
++ *********************************/
++
++#define VLYNQ_R_REV_OFFSET 0x0080
++#define VLYNQ_R_CTRL_OFFSET 0x0084
++#define VLYNQ_R_STATUS_OFFSET 0x0088
++#define VLYNQ_R_INT_STAT_OFFSET 0x0090
++#define VLYNQ_R_INT_PEND_OFFSET 0x0094
++#define VLYNQ_R_INT_PTR_OFFSET 0x0098
++#define VLYNQ_R_TXMAP_OFFSET 0x009c
++
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
++
++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0
++
++#define VLYNQ_R_REV_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET))
++#define VLYNQ_R_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++
++
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) )
++
++
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK 0xffff0000
++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00
++#define VLYNQ_MINOR_REV_MASK 0x000000ff
++
++
++#define VLYNQ_CTL_ILOOP_MASK 0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080
++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00
++#define VLYNQ_CTL_INTEN_MASK 0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000
++#define VLYNQ_CTL_MODE_MASK 0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */
++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK 0x00000200
++#define VLYNQ_STS_IFLOW_MASK 0x00000400
++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK 0xE0000000
++
++#define VLYNQ_CTL_INTVEC_SHIFT 0x08
++#define VLYNQ_CTL_INTEN_SHIFT 0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK 0x80
++#define VLYNQ_IVR_INTTYPE_MASK 0x40
++#define VLYNQ_IVR_INTPOL_MASK 0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++ if( pdev->reset_cb != NULL) \
++ { \
++ (pdev->reset_cb)(pdev, (arg)); \
++ }
++
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3)
++
++
++/*************************************
++ * Enums *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++ /* Init host local memory regions.This allows
++ * local host access remote memory regions */
++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++ /* Init host remote memory regions.This allows
++ * remote device access local memory regions */
++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++ /* Init local interrupt config*/
++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04,
++ /* Init remote interrupt config*/
++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08,
++ /* Check link during initialization*/
++ VLYNQ_INIT_CHECK_LINK =0x10,
++ /* configure clock during init */
++ VLYNQ_INIT_CONFIG_CLOCK =0x20,
++ /* Clear errors during init */
++ VLYNQ_INIT_CLEAR_ERRORS =0x40,
++ /* All options */
++ VLYNQ_INIT_PERFORM_ALL =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */
++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
++
++
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/
++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */
++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
++
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */
++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */
++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */
++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */
++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
++
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++ VLYNQ_BUS_WIDTH_3 = 3,
++ VLYNQ_BUS_WIDTH_5 = 5,
++ VLYNQ_BUS_WIDTH_7 = 7,
++ VLYNQ_BUS_WIDTH_9 = 9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq
++ * interrupts are processed by the host or passed on to the
++ * remote device.
++ */
++typedef enum
++{
++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */
++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;
++
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote
++ * interrupts are to be handled by the SOC system ISR
++ * or via the vlynq root ISR
++ */
++typedef enum
++{
++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */
++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
++
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++ VLYNQ_INTR_ACTIVE_HIGH = 0,
++ VLYNQ_INTR_ACTIVE_LOW = 1
++}VLYNQ_INTR_POLARITY;
++
++
++/* VLYNQ_INTR_TYPE - vlynq interrupt type */
++typedef enum
++{
++ VLYNQ_INTR_LEVEL = 0,
++ VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
++
++
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++ VLYNQ_RESET_ASSERT, /* hold device in reset state */
++ VLYNQ_RESET_DEASSERT, /* release device from reset state */
++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */
++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */
++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */
++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++
++
++
++/*************************************
++ * Typedefs *
++ *************************************/
++
++struct VLYNQ_DEV_t; /*forward declaration*/
++
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */
++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */
++ unsigned int dwStatRegVal); /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++ unsigned int Txmap;
++ unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++ unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register */
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++ /* vlynq interrupts handled by host or remote - maps to
++ * intLocal bit in vlynq control register */
++ VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++ /* remote interrupts handled by vlynq isr or host system
++ * interrupt controller - maps to the int2Cfg in vlynq
++ * control register */
++ VLYNQ_REMOTE_INT_CONFIG intRemote;
++
++ /* bit in pending/set register used for module interrupts*/
++ unsigned int map_vector;
++
++ /* used only if remote interrupts are to be handled by system ISR*/
++ unsigned int intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */
++ void *arg1 ; /* Arg 1 for the ISR */
++ void *arg2 ; /* Arg 2 for the ISR */
++ void *arg3 ; /* Arg 3 for the ISR */
++ unsigned int isrCount; /* number of ISR invocations so far */
++ struct VLYNQ_INTR_CNTRL_ICB_t *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++ unsigned int revision; /*offset : 0x00 */
++ unsigned int control; /* 0x04*/
++ unsigned int status; /* 0x08*/
++ unsigned int pad1; /* 0x0c*/
++ unsigned int intStatus; /*0x10*/
++ unsigned int intPending; /*0x14*/
++ unsigned int intPtr; /*0x18*/
++ unsigned int txMap; /*0x1C*/
++ unsigned int rxSize1; /*0x20*/
++ unsigned int rxOffset1; /*0x24*/
++ unsigned int rxSize2; /*0x28*/
++ unsigned int rxOffset2; /*0x2C*/
++ unsigned int rxSize3; /*0x30*/
++ unsigned int rxOffset3; /*0x34*/
++ unsigned int rxSize4; /*0x38*/
++ unsigned int rxOffset4; /*0x3C*/
++ unsigned int chipVersion; /*0x40*/
++ unsigned int pad2[8];
++ unsigned int ivr30; /*0x60*/
++ unsigned int ivr74; /*0x64*/
++ unsigned int pad3[7];
++}VLYNQ_REG_SET;
++
++
++typedef struct VLYNQ_DEV_t
++{
++ /** module index:1,2,3... used for debugging purposes */
++ unsigned int dev_idx;
++
++ /*VLYNQ module base address */
++ unsigned int module_base;
++
++ /* clock source selection */
++ VLYNQ_CLK_SOURCE clk_source;
++
++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++ unsigned int clk_div;
++
++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++ VLYNQ_DRV_STATE state;
++
++ /* Valid VLYNQ bus width, filled by driver */
++ VLYNQ_BUS_WIDTH width;
++
++ /* local memory mapping */
++ VLYNQ_MEMORY_MAP local_mem;
++
++ /* remote memory mapping */
++ VLYNQ_MEMORY_MAP remote_mem;
++
++ /* Local module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL local_irq;
++
++ /* remote module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL remote_irq;
++
++ /*** ICB related fields **/
++
++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) +
++ * expansion slots for shared interrupts*/
++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++ VLYNQ_INTR_CNTRL_ICB *freelist;
++
++ /* table holding mapping between intVector and the bit position the interrupt
++ * is mapped to(mapVector)*/
++ char vector_map[32];
++
++ /* user callback for vlynq events, NULL if unused */
++ VLYNQ_REPORT_CB report_cb;
++
++ /* user callback for resetting/realeasing remote device */
++ VLYNQ_RESET_REMOTE reset_cb;
++
++ /*** Handles provided for direct access to register set if need be
++ * Must be intialized to point to appropriate address during
++ * vlynq_init */
++ volatile VLYNQ_REG_SET * local;
++ volatile VLYNQ_REG_SET * remote;
++
++ unsigned int intCount; /* number of interrupts generated so far */
++ unsigned int isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
++{
++ int irq;
++ void * arg;
++ void * regset;
++}VLYNQ_ISR_ARGS;
++
++
++/****************************************
++ * Function Prototypes *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */
++int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ unsigned int map_vector,
++ VLYNQ_DEV_TYPE dev,
++ VLYNQ_INTR_POLARITY pol,
++ VLYNQ_INTR_TYPE type);
++
++
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int enable);
++
++unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++ unsigned int map_vector);
++
++int vlynq_install_isr( VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3);
++
++int vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ void *arg1, void *arg2, void *arg3);
++
++
++void vlynq_root_isr(void *arg);
++
++void vlynq_delay(unsigned int clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit
++ * position in interrupt status register*/
++
++int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int int_vector,
++ unsigned int map_vector);
++
++int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector,
++ VLYNQ_INTR_POLARITY pol);
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector);
++
++int vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector,
++ VLYNQ_INTR_TYPE type);
++
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector);
++
++int vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector);
++
++int vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector);
++
++
++
++
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,606 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.h
++ * Description :
++ * This header file provides the set of functions exported by the
++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ * ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++#include <asm/ar7/avalanche_types.h>
++#include <asm/ar7/vlynq_hal_params.h>
++
++#ifndef PRIVATE
++#define PRIVATE static
++#endif
++
++#ifndef GLOBAL
++#define GLOBAL
++#endif
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG
++
++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)
++#else
++#define debugPrint(format,args...)
++#endif
++
++/* Error defines */
++#define VLYNQ_SUCCESS 0
++
++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
++
++/* Vlynq Defines and Macros */
++
++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */
++
++/* Base address of module */
++#define VLYNQ_BASE (pdev->module_base)
++
++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080
++
++#define VLYNQ_REV_OFFSET 0x0000
++#define VLYNQ_CTRL_OFFSET 0x0004
++#define VLYNQ_STATUS_OFFSET 0x0008
++#define VLYNQ_INT_STAT_OFFSET 0x0010
++#define VLYNQ_INT_PEND_OFFSET 0x0014
++#define VLYNQ_INT_PTR_OFFSET 0x0018
++#define VLYNQ_TXMAP_OFFSET 0x001c
++
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024
++
++#define VLYNQ_CHIP_VER_OFFSET 0x0040
++#define VLYNQ_IVR_REGS_OFFSET 0x0060
++
++#define VLYNQ_INT_PENDING_REG_PTR 0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14
++
++#define VLYNQ_REV_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
++
++#define VLYNQ_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
++
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
++
++#define VLYNQ_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++
++#define VLYNQ_IVR_INTEN(ivr) (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr) (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr) (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr) (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr) (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
++
++
++
++/*********************************
++ * Remote VLYNQ register set *
++ *********************************/
++
++#define VLYNQ_R_REV_OFFSET 0x0080
++#define VLYNQ_R_CTRL_OFFSET 0x0084
++#define VLYNQ_R_STATUS_OFFSET 0x0088
++#define VLYNQ_R_INT_STAT_OFFSET 0x0090
++#define VLYNQ_R_INT_PEND_OFFSET 0x0094
++#define VLYNQ_R_INT_PTR_OFFSET 0x0098
++#define VLYNQ_R_TXMAP_OFFSET 0x009c
++
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
++
++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0
++
++#define VLYNQ_R_REV_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET))
++#define VLYNQ_R_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++
++
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) )
++
++
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK 0xffff0000
++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00
++#define VLYNQ_MINOR_REV_MASK 0x000000ff
++
++
++#define VLYNQ_CTL_ILOOP_MASK 0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080
++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00
++#define VLYNQ_CTL_INTEN_MASK 0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000
++#define VLYNQ_CTL_MODE_MASK 0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */
++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK 0x00000200
++#define VLYNQ_STS_IFLOW_MASK 0x00000400
++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK 0xE0000000
++
++#define VLYNQ_CTL_INTVEC_SHIFT 0x08
++#define VLYNQ_CTL_INTEN_SHIFT 0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK 0x80
++#define VLYNQ_IVR_INTTYPE_MASK 0x40
++#define VLYNQ_IVR_INTPOL_MASK 0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++ if( pdev->reset_cb != NULL) \
++ { \
++ (pdev->reset_cb)(pdev, (arg)); \
++ }
++
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3)
++
++
++/*************************************
++ * Enums *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++ /* Init host local memory regions.This allows
++ * local host access remote memory regions */
++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++ /* Init host remote memory regions.This allows
++ * remote device access local memory regions */
++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++ /* Init local interrupt config*/
++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04,
++ /* Init remote interrupt config*/
++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08,
++ /* Check link during initialization*/
++ VLYNQ_INIT_CHECK_LINK =0x10,
++ /* configure clock during init */
++ VLYNQ_INIT_CONFIG_CLOCK =0x20,
++ /* Clear errors during init */
++ VLYNQ_INIT_CLEAR_ERRORS =0x40,
++ /* All options */
++ VLYNQ_INIT_PERFORM_ALL =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */
++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
++
++
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/
++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */
++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
++
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */
++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */
++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */
++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */
++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
++
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++ VLYNQ_BUS_WIDTH_3 = 3,
++ VLYNQ_BUS_WIDTH_5 = 5,
++ VLYNQ_BUS_WIDTH_7 = 7,
++ VLYNQ_BUS_WIDTH_9 = 9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq
++ * interrupts are processed by the host or passed on to the
++ * remote device.
++ */
++typedef enum
++{
++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */
++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;
++
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote
++ * interrupts are to be handled by the SOC system ISR
++ * or via the vlynq root ISR
++ */
++typedef enum
++{
++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */
++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
++
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++ VLYNQ_INTR_ACTIVE_HIGH = 0,
++ VLYNQ_INTR_ACTIVE_LOW = 1
++}VLYNQ_INTR_POLARITY;
++
++
++/* VLYNQ_INTR_TYPE - vlynq interrupt type */
++typedef enum
++{
++ VLYNQ_INTR_LEVEL = 0,
++ VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
++
++
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++ VLYNQ_RESET_ASSERT, /* hold device in reset state */
++ VLYNQ_RESET_DEASSERT, /* release device from reset state */
++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */
++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */
++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */
++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++
++
++
++/*************************************
++ * Typedefs *
++ *************************************/
++
++struct VLYNQ_DEV_t; /*forward declaration*/
++
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */
++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */
++ UINT32 dwStatRegVal); /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++ UINT32 Txmap;
++ UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++ UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register */
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++ /* vlynq interrupts handled by host or remote - maps to
++ * intLocal bit in vlynq control register */
++ VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++ /* remote interrupts handled by vlynq isr or host system
++ * interrupt controller - maps to the int2Cfg in vlynq
++ * control register */
++ VLYNQ_REMOTE_INT_CONFIG intRemote;
++
++ /* bit in pending/set register used for module interrupts*/
++ UINT32 map_vector;
++
++ /* used only if remote interrupts are to be handled by system ISR*/
++ UINT32 intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */
++ void *arg1 ; /* Arg 1 for the ISR */
++ void *arg2 ; /* Arg 2 for the ISR */
++ void *arg3 ; /* Arg 3 for the ISR */
++ UINT32 isrCount; /* number of ISR invocations so far */
++ struct VLYNQ_INTR_CNTRL_ICB_t *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++ UINT32 revision; /*offset : 0x00 */
++ UINT32 control; /* 0x04*/
++ UINT32 status; /* 0x08*/
++ UINT32 pad1; /* 0x0c*/
++ UINT32 intStatus; /*0x10*/
++ UINT32 intPending; /*0x14*/
++ UINT32 intPtr; /*0x18*/
++ UINT32 txMap; /*0x1C*/
++ UINT32 rxSize1; /*0x20*/
++ UINT32 rxOffset1; /*0x24*/
++ UINT32 rxSize2; /*0x28*/
++ UINT32 rxOffset2; /*0x2C*/
++ UINT32 rxSize3; /*0x30*/
++ UINT32 rxOffset3; /*0x34*/
++ UINT32 rxSize4; /*0x38*/
++ UINT32 rxOffset4; /*0x3C*/
++ UINT32 chipVersion; /*0x40*/
++ UINT32 pad2[8];
++ UINT32 ivr30; /*0x60*/
++ UINT32 ivr74; /*0x64*/
++ UINT32 pad3[7];
++}VLYNQ_REG_SET;
++
++
++typedef struct VLYNQ_DEV_t
++{
++ /** module index:1,2,3... used for debugging purposes */
++ UINT32 dev_idx;
++
++ /*VLYNQ module base address */
++ UINT32 module_base;
++
++ /* clock source selection */
++ VLYNQ_CLK_SOURCE clk_source;
++
++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++ UINT32 clk_div;
++
++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++ VLYNQ_DRV_STATE state;
++
++ /* Valid VLYNQ bus width, filled by driver */
++ VLYNQ_BUS_WIDTH width;
++
++ /* local memory mapping */
++ VLYNQ_MEMORY_MAP local_mem;
++
++ /* remote memory mapping */
++ VLYNQ_MEMORY_MAP remote_mem;
++
++ /* Local module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL local_irq;
++
++ /* remote module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL remote_irq;
++
++ /*** ICB related fields **/
++
++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) +
++ * expansion slots for shared interrupts*/
++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++ VLYNQ_INTR_CNTRL_ICB *freelist;
++
++ /* table holding mapping between intVector and the bit position the interrupt
++ * is mapped to(mapVector)*/
++ INT8 vector_map[32];
++
++ /* user callback for vlynq events, NULL if unused */
++ VLYNQ_REPORT_CB report_cb;
++
++ /* user callback for resetting/realeasing remote device */
++ VLYNQ_RESET_REMOTE reset_cb;
++
++ /*** Handles provided for direct access to register set if need be
++ * Must be intialized to point to appropriate address during
++ * vlynq_init */
++ volatile VLYNQ_REG_SET * local;
++ volatile VLYNQ_REG_SET * remote;
++
++ UINT32 intCount; /* number of interrupts generated so far */
++ UINT32 isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
++{
++ int irq;
++ void * arg;
++ void * regset;
++}VLYNQ_ISR_ARGS;
++
++
++/****************************************
++ * Function Prototypes *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */
++GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev,
++ UINT32 int_vector,
++ UINT32 map_vector,
++ VLYNQ_DEV_TYPE dev,
++ VLYNQ_INTR_POLARITY pol,
++ VLYNQ_INTR_TYPE type);
++
++
++GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ UINT32 int_vector,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 enable);
++
++GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev,
++ UINT32 map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3);
++
++GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++ UINT32 map_vector,
++ void *arg1, void *arg2, void *arg3);
++
++
++GLOBAL void vlynq_root_isr(void *arg);
++
++GLOBAL void vlynq_delay(UINT32 clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit
++ * position in interrupt status register*/
++
++GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 int_vector,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector,
++ VLYNQ_INTR_POLARITY pol);
++
++GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector,
++ VLYNQ_INTR_TYPE type);
++
++GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector);
++
++
++
++
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal_params.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,50 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/* This file defines Vlynq module parameters*/
++
++#ifndef _VLYNQ_HAL_PARAMS_H
++#define _VLYNQ_HAL_PARAMS_H
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR 0x08
++
++#define VLYNQ_CLK_DIV_MAX 0x08
++#define VLYNQ_CLK_DIV_MIN 0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++#endif /* _VLYNQ_HAL_PARAMS_H */
+diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h
+--- linux.old/include/asm-mips/io.h 2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/io.h 2005-11-10 01:14:16.400733500 +0100
+@@ -61,9 +61,9 @@
+ * Change "struct page" to physical address.
+ */
#ifdef CONFIG_64BIT_PHYS_ADDR
- #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
+-#define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page) (((u64)(page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
#else
-+#ifdef CONFIG_AR7_PAGING
-+#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + CONFIG_AR7_MEMORY)
-+#else
- #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
#endif
-+#endif
#define IO_SPACE_LIMIT 0xffff
-
-diff -urN linux-2.4.30/include/asm-mips/irq.h linux-2.4.30.dev/include/asm-mips/irq.h
---- linux-2.4.30/include/asm-mips/irq.h 2005-06-14 18:42:07.000000000 +0200
-+++ linux-2.4.30.dev/include/asm-mips/irq.h 2005-06-14 15:36:59.000000000 +0200
-@@ -14,7 +14,12 @@
+diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h
+--- linux.old/include/asm-mips/irq.h 2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/irq.h 2005-11-10 01:12:43.950955750 +0100
+@@ -14,7 +14,20 @@
#include <linux/config.h>
#include <linux/linkage.h>
+#ifdef CONFIG_AR7
-+#include <asm/ar7/avalanche_intc.h>
-+#define NR_IRQS AVALANCHE_INT_END + 1
++/* MIPS has 8 irqs
++ * AR7 has 40 primary and 32 secondary irqs
++ * vlynq0 has 32 irqs
++ * vlynq1 has 32 irqs
++ */
++#ifdef CONFIG_AR7_VLYNQ
++#define NR_IRQS (80 + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#else
++#define NR_IRQS 80
++#endif
+#else
#define NR_IRQS 128 /* Largest number of ints of all machines. */
+#endif
#ifdef CONFIG_I8259
static inline int irq_cannonicalize(int irq)
-diff -urN linux-2.4.30/include/asm-mips/page.h linux-2.4.30.dev/include/asm-mips/page.h
---- linux-2.4.30/include/asm-mips/page.h 2005-06-14 18:42:07.000000000 +0200
-+++ linux-2.4.30.dev/include/asm-mips/page.h 2005-06-14 15:36:59.000000000 +0200
-@@ -129,7 +129,11 @@
+diff -urN linux.old/include/asm-mips/mips-boards/prom.h linux.dev/include/asm-mips/mips-boards/prom.h
+--- linux.old/include/asm-mips/mips-boards/prom.h 2001-09-09 19:43:02.000000000 +0200
++++ linux.dev/include/asm-mips/mips-boards/prom.h 2005-11-10 01:14:16.436735750 +0100
+@@ -33,7 +33,7 @@
+ extern void prom_init_cmdline(void);
+ extern void prom_meminit(void);
+ extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+-extern void prom_free_prom_memory (void);
++extern unsigned long prom_free_prom_memory (void);
+ extern void mips_display_message(const char *str);
+ extern void mips_display_word(unsigned int num);
+ extern int get_ethernet_addr(char *ethernet_addr);
+diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h
+--- linux.old/include/asm-mips/page.h 2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/page.h 2005-11-10 01:14:16.436735750 +0100
+@@ -12,6 +12,7 @@
+
+ #include <linux/config.h>
+ #include <asm/break.h>
++#include <asm/addrspace.h>
+
+ #ifdef __KERNEL__
+
+@@ -129,7 +130,7 @@
#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
-+#ifdef CONFIG_AR7_PAGING
-+#define virt_to_page(kaddr) phys_to_page(__pa(kaddr))
-+#else
- #define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
-+#endif
+-#define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
++#define virt_to_page(kaddr) (mem_map + ((__pa(kaddr)-PHYS_OFFSET) >> PAGE_SHIFT))
#define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
-diff -urN linux-2.4.30/include/asm-mips/pgtable-32.h linux-2.4.30.dev/include/asm-mips/pgtable-32.h
---- linux-2.4.30/include/asm-mips/pgtable-32.h 2005-06-14 18:42:07.000000000 +0200
-+++ linux-2.4.30.dev/include/asm-mips/pgtable-32.h 2005-06-14 15:36:59.000000000 +0200
-@@ -108,7 +108,18 @@
+diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h
+--- linux.old/include/asm-mips/pgtable-32.h 2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/pgtable-32.h 2005-11-10 01:14:16.436735750 +0100
+@@ -108,7 +108,7 @@
* and a page entry and page directory to the page they refer to.
*/
-#ifdef CONFIG_CPU_VR41XX
-+#if defined(CONFIG_AR7_PAGING)
-+#define mk_pte(page, pgprot) \
-+({ \
-+ pte_t __pte; \
-+ \
-+ pte_val(__pte) = ((phys_t)(page - mem_map) << (PAGE_SHIFT) | \
-+ CONFIG_AR7_MEMORY) | \
-+ pgprot_val(pgprot); \
-+ \
-+ __pte; \
-+})
-+#elif defined(CONFIG_CPU_VR41XX)
++#if defined(CONFIG_CPU_VR41XX)
#define mk_pte(page, pgprot) \
({ \
pte_t __pte; \
-@@ -130,6 +141,7 @@
+@@ -123,13 +123,14 @@
+ ({ \
+ pte_t __pte; \
+ \
+- pte_val(__pte) = ((phys_t)(page - mem_map) << PAGE_SHIFT) | \
+- pgprot_val(pgprot); \
++ pte_val(__pte) = (((phys_t)(page - mem_map) << PAGE_SHIFT) + \
++ PHYS_OFFSET) | pgprot_val(pgprot); \
+ \
+ __pte; \
})
#endif
static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot)
{
#ifdef CONFIG_CPU_VR41XX
-@@ -175,7 +187,10 @@
+@@ -175,12 +176,12 @@
set_pte(ptep, __pte(0));
}
-#ifdef CONFIG_CPU_VR41XX
-+#if defined(CONFIG_AR7_PAGING)
-+#define phys_to_page(phys) (mem_map + (((phys)-CONFIG_AR7_MEMORY) >> PAGE_SHIFT))
-+#define pte_page(x) phys_to_page(pte_val(x))
-+#elif defined(CONFIG_CPU_VR41XX)
++#if defined(CONFIG_CPU_VR41XX)
#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2)))))
#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot))
#else
-diff -urN linux-2.4.30/include/asm-mips/serial.h linux-2.4.30.dev/include/asm-mips/serial.h
---- linux-2.4.30/include/asm-mips/serial.h 2005-06-14 18:42:07.000000000 +0200
-+++ linux-2.4.30.dev/include/asm-mips/serial.h 2005-06-14 15:36:59.000000000 +0200
-@@ -65,6 +65,15 @@
+-#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT))))
+-#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot))
++#define pte_page(x) (mem_map+((unsigned long)((((x).pte_low-PHYS_OFFSET) >> PAGE_SHIFT))))
++#define __mk_pte(page_nr,pgprot) __pte((((page_nr) << PAGE_SHIFT)+PHYS_OFFSET)|pgprot_val(pgprot))
+ #endif
+
+ #endif
+diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
+--- linux.old/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100
++++ linux.dev/include/asm-mips/serial.h 2005-11-10 01:14:16.436735750 +0100
+@@ -65,6 +65,16 @@
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+#ifdef CONFIG_AR7
+#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
+#define AR7_SERIAL_PORT_DEFNS \
-+ { 0, AVALANCHE_BASE_BAUD, AVALANCHE_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
-+ { 0, AVALANCHE_BASE_BAUD, AVALANCHE_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS },
++ { 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
++ { 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS },
+#else
+#define AR7_SERIAL_PORT_DEFNS
+#endif
#ifdef CONFIG_MIPS_JAZZ
#define _JAZZ_SERIAL_INIT(int, base) \
{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
-@@ -468,6 +477,7 @@
+@@ -468,6 +478,7 @@
#endif
#define SERIAL_PORT_DFNS \
projects / openwrt.git / blobdiff