include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
-PKG_VERSION:=r2568-20070710
-PKG_BRANCH:=madwifi-ng
-PKG_RELEASE:=2
+PKG_REV:=3053
+PKG_VERSION:=r$(PKG_REV)
+PKG_BRANCH:=madwifi-dfs
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=svn
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
-PKG_SOURCE:=$(PKG_BRANCH)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://snapshots.madwifi.org/$(PKG_BRANCH)
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BRANCH)-$(PKG_VERSION)
-PKG_MD5SUM:=fe5d41acd085d2c46934be3f8839e694
include $(INCLUDE_DIR)/package.mk
-RATE_CONTROL:=minstrel
-
ifeq ($(ARCH),mips)
HAL_TARGET:=mips-be-elf
endif
ifeq ($(ARCH),i386)
HAL_TARGET:=i386-elf
endif
+ifeq ($(ARCH),i686)
+ HAL_TARGET:=i386-elf
+endif
ifeq ($(ARCH),armeb)
HAL_TARGET:=xscale-be-elf
endif
HAL_TARGET:=powerpc-be-elf
endif
-BUS:=PCI
-ifneq ($(CONFIG_LINUX_2_6_ATHEROS),)
+ifneq ($(CONFIG_TARGET_atheros),)
BUS:=AHB
HAL_TARGET:=ap51
-endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
- BUS:=PCI AHB # no suitable HAL for AHB yet.
+else
+ ifneq ($(CONFIG_PCI_SUPPORT),)
+ BUS:=PCI
+ endif
endif
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
- BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
- BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_uml),)
+ BUS:=
endif
+RATE_CONTROL:=minstrel
+
+MADWIFI_FILES:= \
+ $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
MADWIFI_AUTOLOAD:= \
wlan \
wlan_scan_ap \
wlan_ccmp \
wlan_tkip \
wlan_wep \
- wlan_xauth
+ wlan_xauth \
ifeq ($(findstring AHB,$(BUS)),AHB)
- MADWIFI_AUTOLOAD += ath_ahb
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_AUTOLOAD+= ath_ahb
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
- MADWIFI_AUTOLOAD += ath_pci
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_AUTOLOAD+= ath_pci
endif
define KernelPackage/madwifi
SUBMENU:=Wireless Drivers
TITLE:=Driver for Atheros wireless chipsets
- DEPENDS:=+wireless-tools @!LINUX_2_6_AVR32 @!LINUX_2_6_ETRAX
- DESCRIPTION:=\
- This package contains a driver for Atheros 802.11a/b/g chipsets.
URL:=http://madwifi.org/
- FILES:= \
- $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
- $(BUS_MODULES) \
- $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+ DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+ FILES:=$(MADWIFI_FILES)
AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
endef
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
- PATH="$(TARGET_PATH)" \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- TARGET="$(HAL_TARGET)" \
- TOOLPREFIX="$(KERNEL_CROSS)" \
- TOOLPATH="$(KERNEL_CROSS)" \
- KERNELPATH="$(LINUX_DIR)" \
- LDOPTS="--no-warn-mismatch " \
- ATH_RATE="ath_rate/$(RATE_CONTROL)" \
- WARNINGS="" \
- DOMULTI=1
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
+endef
+
+MAKE_ARGS:= \
+ PATH="$(TARGET_PATH)" \
+ ARCH="$(LINUX_KARCH)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ TARGET="$(HAL_TARGET)" \
+ TOOLPREFIX="$(KERNEL_CROSS)" \
+ TOOLPATH="$(KERNEL_CROSS)" \
+ KERNELPATH="$(LINUX_DIR)" \
+ LDOPTS="--no-warn-mismatch " \
+ ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+ WARNINGS="" \
+ DOMULTI=1
+
+MAKE_VARS:= \
+ COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
ifeq ($(findstring AHB,$(BUS)),AHB)
define Build/Compile/ahb
- COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" modules
+ $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+ $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
endef
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
define Build/Compile/pci
- COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" modules
+ $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+ $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
endef
endif
define Build/Compile
$(call Build/Compile/ahb)
$(call Build/Compile/pci)
- $(MAKE) $(MADWIFI_MAKEOPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- tools
endef
define Build/InstallDev
- mkdir -p $(STAGING_DIR)/usr/include/madwifi
- $(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
- mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
- $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
-endef
-
-define Build/UninstallDev
- rm -rf $(STAGING_DIR)/usr/include/madwifi
+ mkdir -p $(1)/usr/include/madwifi
+ $(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+ mkdir -p $(1)/usr/include/madwifi/net80211
+ $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
endef
define KernelPackage/madwifi/install
projects / openwrt.git / blobdiff