-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/aes_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/crypto/aes_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/crypto/aes_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/aes_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,458 @@
-+/*
-+ * arch/ubicom32/crypto/aes_ubicom32.c
-+ * Ubicom32 implementation of the AES Cipher Algorithm.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <crypto/aes.h>
-+#include <crypto/algapi.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include "crypto_ubicom32.h"
-+#include <asm/linkage.h>
-+
-+struct ubicom32_aes_ctx {
-+ u8 key[AES_MAX_KEY_SIZE];
-+ u32 ctrl;
-+ int key_len;
-+};
-+
-+static inline void aes_hw_set_key(const u8 *key, u8 key_len)
-+{
-+ /*
-+ * switch case has more overhead than 4 move.4 instructions, so just copy 256 bits
-+ */
-+ SEC_SET_KEY_256(key);
-+}
-+
-+static inline void aes_hw_set_iv(const u8 *iv)
-+{
-+ SEC_SET_IV_4W(iv);
-+}
-+
-+static inline void aes_hw_cipher(u8 *out, const u8 *in)
-+{
-+ SEC_SET_INPUT_4W(in);
-+
-+ asm volatile (
-+ " ; start AES by writing 0x40(SECURITY_BASE) \n\t"
-+ " move.4 0x40(%0), #0x01 \n\t"
-+ " pipe_flush 0 \n\t"
-+ " \n\t"
-+ " ; wait for the module to calculate the output \n\t"
-+ " btst 0x04(%0), #0 \n\t"
-+ " jmpne.f .-4 \n\t"
-+ :
-+ : "a" (SEC_BASE)
-+ : "cc"
-+ );
-+
-+ SEC_GET_OUTPUT_4W(out);
-+}
-+
-+static int __ocm_text aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
-+ unsigned int key_len)
-+{
-+ struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm);
-+
-+ uctx->key_len = key_len;
-+ memcpy(uctx->key, in_key, key_len);
-+
-+ /*
-+ * leave out HASH_ALG (none = 0), CBC (no = 0), DIR (unknown) yet
-+ */
-+ switch (uctx->key_len) {
-+ case 16:
-+ uctx->ctrl = SEC_KEY_128_BITS | SEC_ALG_AES;
-+ break;
-+ case 24:
-+ uctx->ctrl = SEC_KEY_192_BITS | SEC_ALG_AES;
-+ break;
-+ case 32:
-+ uctx->ctrl = SEC_KEY_256_BITS | SEC_ALG_AES;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline void aes_cipher(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags)
-+{
-+ const struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm);
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
-+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
-+
-+ aes_hw_set_key(uctx->key, uctx->key_len);
-+ aes_hw_cipher(out, in);
-+
-+ hw_crypto_unlock();
-+}
-+
-+static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+ aes_cipher(tfm, out, in, SEC_DIR_ENCRYPT);
-+}
-+
-+static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+ aes_cipher(tfm, out, in, SEC_DIR_DECRYPT);
-+}
-+
-+static struct crypto_alg aes_alg = {
-+ .cra_name = "aes",
-+ .cra_driver_name = "aes-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(aes_alg.cra_list),
-+ .cra_u = {
-+ .cipher = {
-+ .cia_min_keysize = AES_MIN_KEY_SIZE,
-+ .cia_max_keysize = AES_MAX_KEY_SIZE,
-+ .cia_setkey = aes_set_key,
-+ .cia_encrypt = aes_encrypt,
-+ .cia_decrypt = aes_decrypt,
-+ }
-+ }
-+};
-+
-+static void __ocm_text ecb_aes_crypt_loop(u8 *out, u8 *in, unsigned int n)
-+{
-+ while (likely(n)) {
-+ aes_hw_cipher(out, in);
-+ out += AES_BLOCK_SIZE;
-+ in += AES_BLOCK_SIZE;
-+ n -= AES_BLOCK_SIZE;
-+ }
-+}
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -148,3 +148,16 @@ config HW_RANDOM_VIRTIO
+
+ To compile this driver as a module, choose M here: the
+ module will be called virtio-rng. If unsure, say N.
+
-+static int __ocm_text ecb_aes_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-+ struct scatterlist *src, unsigned int nbytes, u32 extra_flags)
-+{
-+ const struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
-+ int ret;
++config HW_RANDOM_UBICOM32
++ tristate "Ubicom32 HW Random Number Generator support"
++ depends on HW_RANDOM && UBICOM32
++ default HW_RANDOM
++ ---help---
++ This driver provides kernel-side support for the Random Number
++ Generator hardware found on Ubicom32 processors.
+
-+ struct blkcipher_walk walk;
-+ blkcipher_walk_init(&walk, dst, src, nbytes);
-+ ret = blkcipher_walk_virt(desc, &walk);
-+ if (ret) {
-+ return ret;
-+ }
++ To compile this driver as a module, choose M here: the
++ module will be called pasemi-rng.
+
-+ hw_crypto_lock();
-+ hw_crypto_check();
++ If unsure, say Y.
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx
+ obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
+ obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
++obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE
+ To compile this driver as a module, choose M here: the module
+ will be called geode-aes.
+
++config CRYPTO_UBICOM32
++ bool "Ubicom32 Security Module"
++ depends on UBICOM32
++ help
++ This is the ubicom32 hardware acceleration common code.
+
-+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
-+ aes_hw_set_key(uctx->key, uctx->key_len);
++config CRYPTO_AES_UBICOM32
++ tristate "Ubicom32 AES implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware AES implementation.
+
-+ while (likely((nbytes = walk.nbytes))) {
-+ /* only use complete blocks */
-+ unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
-+ u8 *out = walk.dst.virt.addr;
-+ u8 *in = walk.src.virt.addr;
++config CRYPTO_DES_UBICOM32
++ tristate "Ubicom32 DES implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware DES and 3DES implementation.
+
-+ /* finish n/16 blocks */
-+ ecb_aes_crypt_loop(out, in, n);
++config CRYPTO_SHA1_UBICOM32
++ tristate "Ubicom32 SHA1 implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware SHA1 implementation.
+
-+ nbytes &= AES_BLOCK_SIZE - 1;
-+ ret = blkcipher_walk_done(desc, &walk, nbytes);
-+ }
++config CRYPTO_MD5_UBICOM32
++ tristate "Ubicom32 MD5 implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware MD5 implementation.
+
-+ hw_crypto_unlock();
-+ return ret;
-+}
+ config ZCRYPT
+ tristate "Support for PCI-attached cryptographic adapters"
+ depends on S390
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -266,3 +266,10 @@ config GPIOMMC_CONFIGFS
+ help
+ This option automatically enables configfs support for gpiommc
+ if configfs is available.
+
-+static int ecb_aes_encrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT);
-+}
++config MMC_UBICOM32
++ tristate "Ubicom32 MMC/SD host controller"
++ depends on UBICOM32
++ help
++ This provides support for the SD/MMC hardware found on Ubicom32
++ IP7K processors
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -30,4 +30,5 @@ obj-$(CONFIG_MMC_S3C) += s3cmci.o
+ obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
+ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+ obj-$(CONFIG_GPIOMMC) += gpiommc.o
++obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
+
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -104,6 +104,31 @@ config M25PXX_USE_FAST_READ
+ help
+ This option enables FAST_READ access supported by ST M25Pxx.
+
++config MTD_UBI32_NAND_SPI_ER
++ tristate "UBI32_NAND SPI-ER support"
++ help
++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
++ using the built in flash controller on the Ubicom32 architecture.
++ Partial page writes are not supported by this driver.
+
-+static int ecb_aes_decrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT);
-+}
++config MTD_NAND_SPI_ER
++ tristate "NAND SPI-ER support"
++ help
++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
++ using a generic SPI bus. Partial page writes are supported
++ by this driver.
+
-+static struct crypto_alg ecb_aes_alg = {
-+ .cra_name = "ecb(aes)",
-+ .cra_driver_name = "ecb-aes-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_type = &crypto_blkcipher_type,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(ecb_aes_alg.cra_list),
-+ .cra_u = {
-+ .blkcipher = {
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .setkey = aes_set_key,
-+ .encrypt = ecb_aes_encrypt,
-+ .decrypt = ecb_aes_decrypt,
-+ }
-+ }
-+};
++config MTD_UBI32_M25P80
++ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
++ depends on UBICOM32
++ default y
++ help
++ This enables access to most modern SPI flash chips, used for
++ program and data storage. Series supported include Atmel AT26DF,
++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
++ are supported as well. See the driver source for the current list,
++ or to add other chips.
+
-+#if CRYPTO_UBICOM32_LOOP_ASM
-+void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ asm volatile (
-+ "; set init. iv 4w \n\t"
-+ " move.4 0x50(%0), 0x0(%3) \n\t"
-+ " move.4 0x54(%0), 0x4(%3) \n\t"
-+ " move.4 0x58(%0), 0x8(%3) \n\t"
-+ " move.4 0x5c(%0), 0xc(%3) \n\t"
-+ " \n\t"
-+ "; we know n > 0, so we can always \n\t"
-+ "; load the first block \n\t"
-+ "; set input 4w \n\t"
-+ " move.4 0x30(%0), 0x0(%2) \n\t"
-+ " move.4 0x34(%0), 0x4(%2) \n\t"
-+ " move.4 0x38(%0), 0x8(%2) \n\t"
-+ " move.4 0x3c(%0), 0xc(%2) \n\t"
-+ " \n\t"
-+ "; kickoff hw \n\t"
-+ " move.4 0x40(%0), %2 \n\t"
-+ " \n\t"
-+ "; update n & flush \n\t"
-+ " add.4 %4, #-16, %4 \n\t"
-+ " pipe_flush 0 \n\t"
-+ " \n\t"
-+ "; while (n): work on 2nd block \n\t"
-+ " 1: lsl.4 d15, %4, #0x0 \n\t"
-+ " jmpeq.f 5f \n\t"
-+ " \n\t"
-+ "; set input 4w (2nd) \n\t"
-+ " move.4 0x30(%0), 0x10(%2) \n\t"
-+ " move.4 0x34(%0), 0x14(%2) \n\t"
-+ " move.4 0x38(%0), 0x18(%2) \n\t"
-+ " move.4 0x3c(%0), 0x1c(%2) \n\t"
-+ " \n\t"
-+ "; update n/in asap while waiting \n\t"
-+ " add.4 %4, #-16, %4 \n\t"
-+ " move.4 d15, 16(%2)++ \n\t"
-+ " \n\t"
-+ "; wait for the previous output \n\t"
-+ " btst 0x04(%0), #0 \n\t"
-+ " jmpne.f -4 \n\t"
-+ " \n\t"
-+ "; read previous output \n\t"
-+ " move.4 0x0(%1), 0x50(%0) \n\t"
-+ " move.4 0x4(%1), 0x54(%0) \n\t"
-+ " move.4 0x8(%1), 0x58(%0) \n\t"
-+ " move.4 0xc(%1), 0x5c(%0) \n\t"
-+ " \n\t"
-+ "; kick off hw for 2nd input \n\t"
-+ " move.4 0x40(%0), %2 \n\t"
-+ " \n\t"
-+ "; update out asap \n\t"
-+ " move.4 d15, 16(%1)++ \n\t"
-+ " \n\t"
-+ "; go back to loop \n\t"
-+ " jmpt 1b \n\t"
-+ " \n\t"
-+ "; wait for last output \n\t"
-+ " 5: btst 0x04(%0), #0 \n\t"
-+ " jmpne.f -4 \n\t"
-+ " \n\t"
-+ "; read last output \n\t"
-+ " move.4 0x0(%1), 0x50(%0) \n\t"
-+ " move.4 0x4(%1), 0x54(%0) \n\t"
-+ " move.4 0x8(%1), 0x58(%0) \n\t"
-+ " move.4 0xc(%1), 0x5c(%0) \n\t"
-+ " \n\t"
-+ "; copy out iv \n\t"
-+ " move.4 0x0(%3), 0x50(%0) \n\t"
-+ " move.4 0x4(%3), 0x54(%0) \n\t"
-+ " move.4 0x8(%3), 0x58(%0) \n\t"
-+ " move.4 0xc(%3), 0x5c(%0) \n\t"
-+ " \n\t"
-+ :
-+ : "a" (SEC_BASE), "a" (out), "a" (in), "a" (iv), "d" (n)
-+ : "d15", "cc"
-+ );
-+}
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,3 +16,6 @@ obj-$(CONFIG_MTD_LART) += lart.o
+ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
++obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
++obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o
++obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2540,6 +2540,19 @@ config JME
+ To compile this driver as a module, choose M here. The module
+ will be called jme.
+
++config UBICOM32_GMAC
++ tristate "Ubicom Gigabit Ethernet support"
++ depends on UBICOM32
++ help
++ Gigabit Ethernet support for ubicom32 processors
+
-+#else
++config UBICOM32_OCM_FOR_SKB
++ bool "USE OCM for SKB (EXPERIMENTAL)"
++ depends on UBICOM32_GMAC
++ default n
++ help
++ Allocate skb from OCM for Ethernet Receive when possible
+
-+static void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ aes_hw_set_iv(iv);
-+ while (likely(n)) {
-+ aes_hw_cipher(out, in);
-+ out += AES_BLOCK_SIZE;
-+ in += AES_BLOCK_SIZE;
-+ n -= AES_BLOCK_SIZE;
-+ }
-+ SEC_COPY_4W(iv, out - AES_BLOCK_SIZE);
-+}
+ endif # NETDEV_1000
+
+ #
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -272,3 +272,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+
+ obj-$(CONFIG_WIMAX) += wimax/
+
++obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
+--- a/drivers/net/usb/asix.c
++++ b/drivers/net/usb/asix.c
+@@ -319,14 +319,33 @@ static int asix_rx_fixup(struct usbnet *
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
++ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (((u32)packet & 0x02) == 0) {
++ memmove(packet - 2, packet, size);
++ skb->data -= 2;
++ skb->tail -= 2;
++ }
+#endif
+ return 2;
++ }
+
-+static void __ocm_text cbc_aes_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ while (likely(n)) {
-+ aes_hw_set_iv(iv);
-+ SEC_COPY_4W(iv, in);
-+ aes_hw_cipher(out, in);
-+ out += AES_BLOCK_SIZE;
-+ in += AES_BLOCK_SIZE;
-+ n -= AES_BLOCK_SIZE;
-+ }
-+}
-+
-+static int __ocm_text cbc_aes_crypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes, u32 extra_flags)
-+{
-+ struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
-+ int ret;
-+
-+ struct blkcipher_walk walk;
-+ blkcipher_walk_init(&walk, dst, src, nbytes);
-+ ret = blkcipher_walk_virt(desc, &walk);
-+ if (unlikely(ret)) {
-+ return ret;
-+ }
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
-+
-+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
-+ aes_hw_set_key(uctx->key, uctx->key_len);
-+
-+ while (likely((nbytes = walk.nbytes))) {
-+ /* only use complete blocks */
-+ unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
-+ if (likely(n)) {
-+ u8 *out = walk.dst.virt.addr;
-+ u8 *in = walk.src.virt.addr;
-+
-+ if (extra_flags & SEC_DIR_ENCRYPT) {
-+ cbc_aes_encrypt_loop(out, in, walk.iv, n);
+ if (size > ETH_FRAME_LEN) {
+ deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (((u32)packet & 0x02) == 0) {
++ memmove(packet - 2, packet, size);
++ ax_skb->data = packet - 2;
+ } else {
-+ cbc_aes_decrypt_loop(out, in, walk.iv, n);
++ ax_skb->data = packet;
+ }
-+ }
-+
-+ nbytes &= AES_BLOCK_SIZE - 1;
-+ ret = blkcipher_walk_done(desc, &walk, nbytes);
-+ }
-+ hw_crypto_unlock();
-+
-+ return ret;
-+}
-+
-+static int __ocm_text cbc_aes_encrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT | SEC_CBC_SET);
-+}
-+
-+static int __ocm_text cbc_aes_decrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT | SEC_CBC_SET);
-+}
-+
-+static struct crypto_alg cbc_aes_alg = {
-+ .cra_name = "cbc(aes)",
-+ .cra_driver_name = "cbc-aes-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_type = &crypto_blkcipher_type,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(cbc_aes_alg.cra_list),
-+ .cra_u = {
-+ .blkcipher = {
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .setkey = aes_set_key,
-+ .encrypt = cbc_aes_encrypt,
-+ .decrypt = cbc_aes_decrypt,
-+ }
-+ }
-+};
-+
-+static int __init aes_init(void)
-+{
-+ int ret;
-+
-+ hw_crypto_init();
-+
-+ ret = crypto_register_alg(&aes_alg);
-+ if (ret)
-+ goto aes_err;
-+
-+ ret = crypto_register_alg(&ecb_aes_alg);
-+ if (ret)
-+ goto ecb_aes_err;
-+
-+ ret = crypto_register_alg(&cbc_aes_alg);
-+ if (ret)
-+ goto cbc_aes_err;
-+
-+out:
-+ return ret;
-+
-+cbc_aes_err:
-+ crypto_unregister_alg(&ecb_aes_alg);
-+ecb_aes_err:
-+ crypto_unregister_alg(&aes_alg);
-+aes_err:
-+ goto out;
-+}
-+
-+static void __exit aes_fini(void)
-+{
-+ crypto_unregister_alg(&cbc_aes_alg);
-+ crypto_unregister_alg(&ecb_aes_alg);
-+ crypto_unregister_alg(&aes_alg);
-+}
-+
-+module_init(aes_init);
-+module_exit(aes_fini);
-+
-+MODULE_ALIAS("aes");
-+
-+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/crypto_des.h linux-2.6.30.10-ubi/arch/ubicom32/crypto/crypto_des.h
---- linux-2.6.30.10/arch/ubicom32/crypto/crypto_des.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/crypto_des.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/crypto/crypto_des.h
-+ * Function for checking keys for the DES and Triple DES Encryption
-+ * algorithms.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef __CRYPTO_DES_H__
-+#define __CRYPTO_DES_H__
-+
-+extern int crypto_des_check_key(const u8*, unsigned int, u32*);
-+
-+#endif /* __CRYPTO_DES_H__ */
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/crypto_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/crypto/crypto_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/crypto/crypto_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/crypto_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,50 @@
-+/*
-+ * arch/ubicom32/crypto/crypto_ubicom32.c
-+ * Generic code to support ubicom32 hardware crypto accelerator
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include "crypto_ubicom32.h"
-+
-+spinlock_t crypto_ubicom32_lock;
-+bool crypto_ubicom32_inited = false;
-+volatile bool crypto_ubicom32_on = false;
-+volatile unsigned long crypto_ubicom32_last_use;
-+
-+struct timer_list crypto_ubicom32_ps_timer;
-+void crypto_ubicom32_ps_check(unsigned long data)
-+{
-+ unsigned long idle_time = msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS);
-+
-+ BUG_ON(!crypto_ubicom32_on);
-+
-+ if (((jiffies - crypto_ubicom32_last_use) > idle_time) && spin_trylock_bh(&crypto_ubicom32_lock)) {
-+ hw_crypto_turn_off();
-+ spin_unlock_bh(&crypto_ubicom32_lock);
-+ return;
-+ }
-+
-+ /* keep monitoring */
-+ hw_crypto_ps_start();
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/crypto_ubicom32.h linux-2.6.30.10-ubi/arch/ubicom32/crypto/crypto_ubicom32.h
---- linux-2.6.30.10/arch/ubicom32/crypto/crypto_ubicom32.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/crypto_ubicom32.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,346 @@
-+/*
-+ * arch/ubicom32/crypto/crypto_ubicom32.h
-+ * Support for Ubicom32 cryptographic instructions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _CRYPTO_ARCH_UBICOM32_CRYPT_H
-+#define _CRYPTO_ARCH_UBICOM32_CRYPT_H
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-+#include <linux/spinlock.h>
-+#include <asm/errno.h>
-+#include <asm/io.h>
-+#include <asm/ip5000.h>
-+
-+#define CRYPTO_UBICOM32_LOOP_ASM 1
-+#define CRYPTO_UBICOM32_ALIGNMENT 4
-+#define SEC_ALIGNED(p) (((u32)p & 3) == 0)
-+
-+#define SEC_BASE SECURITY_BASE
-+#define SEC_KEY_OFFSET SECURITY_KEY_VALUE(0)
-+#define SEC_INPUT_OFFSET SECURITY_KEY_IN(0)
-+#define SEC_OUTPUT_OFFSET SECURITY_KEY_OUT(0)
-+#define SEC_HASH_OFFSET SECURITY_KEY_HASH(0)
-+
-+#define SEC_KEY_128_BITS SECURITY_CTRL_KEY_SIZE(0)
-+#define SEC_KEY_192_BITS SECURITY_CTRL_KEY_SIZE(1)
-+#define SEC_KEY_256_BITS SECURITY_CTRL_KEY_SIZE(2)
-+
-+#define SEC_HASH_NONE SECURITY_CTRL_HASH_ALG_NONE
-+#define SEC_HASH_MD5 SECURITY_CTRL_HASH_ALG_MD5
-+#define SEC_HASH_SHA1 SECURITY_CTRL_HASH_ALG_SHA1
-+
-+#define SEC_CBC_SET SECURITY_CTRL_CBC
-+#define SEC_CBC_NONE 0
-+
-+#define SEC_ALG_AES SECURITY_CTRL_CIPHER_ALG_AES
-+#define SEC_ALG_NONE SECURITY_CTRL_CIPHER_ALG_NONE
-+#define SEC_ALG_DES SECURITY_CTRL_CIPHER_ALG_DES
-+#define SEC_ALG_3DES SECURITY_CTRL_CIPHER_ALG_3DES
-+
-+#define SEC_DIR_ENCRYPT SECURITY_CTRL_ENCIPHER
-+#define SEC_DIR_DECRYPT 0
-+
-+#define CRYPTO_UBICOM32_PRIORITY 300
-+#define CRYPTO_UBICOM32_COMPOSITE_PRIORITY 400
-+
-+#define HW_CRYPTO_PS_MAX_IDLE_MS 100 /* idle time (ms) before shuting down sm */
-+
-+extern spinlock_t crypto_ubicom32_lock;
-+extern bool crypto_ubicom32_inited;
-+extern volatile bool crypto_ubicom32_on;
-+extern volatile unsigned long crypto_ubicom32_last_use;
-+extern struct timer_list crypto_ubicom32_ps_timer;
-+extern void crypto_ubicom32_ps_check(unsigned long data);
-+
-+#define SEC_COPY_2W(t, s) \
-+ asm volatile ( \
-+ " move.4 0(%0), 0(%1) \n\t" \
-+ " move.4 4(%0), 4(%1) \n\t" \
-+ \
-+ : \
-+ : "a" (t), "a" (s) \
-+ )
-+
-+#define SEC_COPY_4W(t, s) \
-+ asm volatile ( \
-+ " move.4 0(%0), 0(%1) \n\t" \
-+ " move.4 4(%0), 4(%1) \n\t" \
-+ " move.4 8(%0), 8(%1) \n\t" \
-+ " move.4 12(%0), 12(%1) \n\t" \
-+ : \
-+ : "a" (t), "a" (s) \
-+ )
-+
-+#define SEC_COPY_5W(t, s) \
-+ asm volatile ( \
-+ " move.4 0(%0), 0(%1) \n\t" \
-+ " move.4 4(%0), 4(%1) \n\t" \
-+ " move.4 8(%0), 8(%1) \n\t" \
-+ " move.4 12(%0), 12(%1) \n\t" \
-+ " move.4 16(%0), 16(%1) \n\t" \
-+ : \
-+ : "a" (t), "a" (s) \
-+ )
++#else
++ ax_skb->data = packet;
++#endif
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ skb_set_tail_pointer(ax_skb, size);
+@@ -1125,13 +1144,19 @@ static int ax88178_link_reset(struct usb
+ mode = AX88178_MEDIUM_DEFAULT;
+
+ if (ecmd.speed == SPEED_1000)
++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ mode |= AX_MEDIUM_GM;
++#else
++ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
++#endif
+ else if (ecmd.speed == SPEED_100)
+ mode |= AX_MEDIUM_PS;
+ else
+ mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ mode |= AX_MEDIUM_ENCK;
++#endif
+
+ if (ecmd.duplex == DUPLEX_FULL)
+ mode |= AX_MEDIUM_FD;
+--- a/drivers/oprofile/cpu_buffer.c
++++ b/drivers/oprofile/cpu_buffer.c
+@@ -328,10 +328,10 @@ static inline void oprofile_end_trace(st
+ }
+
+ static inline void
+-__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+- unsigned long event, int is_kernel)
++__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
++ unsigned long event, int is_kernel, int cpu)
+ {
+- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
++ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
+ unsigned long backtrace = oprofile_backtrace_depth;
+
+ /*
+@@ -353,7 +353,8 @@ __oprofile_add_ext_sample(unsigned long
+ void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel)
+ {
+- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
++ __oprofile_add_ext_sample_cpu(pc, regs, event,
++ is_kernel, smp_processor_id());
+ }
+
+ void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
+@@ -361,7 +362,8 @@ void oprofile_add_sample(struct pt_regs
+ int is_kernel = !user_mode(regs);
+ unsigned long pc = profile_pc(regs);
+
+- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
++ __oprofile_add_ext_sample_cpu(pc, regs, event,
++ is_kernel, smp_processor_id());
+ }
+
+ /*
+--- a/drivers/pci/Makefile
++++ b/drivers/pci/Makefile
+@@ -44,8 +44,8 @@ obj-$(CONFIG_PPC) += setup-bus.o
+ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+ obj-$(CONFIG_X86_VISWS) += setup-irq.o
+ obj-$(CONFIG_MN10300) += setup-bus.o
++obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
+
+-#
+ # ACPI Related PCI FW Functions
+ #
+ obj-$(CONFIG_ACPI) += pci-acpi.o
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -871,6 +871,57 @@ config SERIAL_UARTLITE_CONSOLE
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
++config SERIAL_UBI32_UARTTIO
++ tristate "Ubicom UARTTIO support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default y
++ help
++ Add support for the Ubicom virtual peripherial serial interface.
+
-+#define SEC_SET_KEY_2W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0x10(%0), 0(%1) \n\t" \
-+ " move.4 0x14(%0), 4(%1) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
++config SERIAL_UBI32_UARTTIO_NR_UARTS
++ int "Maximum number of UARTTIO virtual serial ports"
++ depends on SERIAL_UBI32_UARTTIO
++ default "4"
++ help
++ Set this to the maximum number of serial ports you want the driver to support.
+
-+#define SEC_SET_KEY_4W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0x10(%0), 0(%1) \n\t" \
-+ " move.4 0x14(%0), 4(%1) \n\t" \
-+ " move.4 0x18(%0), 8(%1) \n\t" \
-+ " move.4 0x1c(%0), 12(%1) \n\t" \
-+ : \
-+ : "a"(SECURITY_BASE), "a"(x) \
-+ )
++config SERIAL_UBI32_UARTTIO_CONSOLE
++ tristate "Ubicom UARTTIO console support"
++ depends on SERIAL_UBI32_UARTTIO=y
++ select SERIAL_CORE_CONSOLE
++ default y
++ help
++ Add support for console on the Ubicom virtual peripherial serial interface.
+
-+#define SEC_SET_KEY_6W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0x10(%0), 0(%1) \n\t" \
-+ " move.4 0x14(%0), 4(%1) \n\t" \
-+ " move.4 0x18(%0), 8(%1) \n\t" \
-+ " move.4 0x1c(%0), 12(%1) \n\t" \
-+ " move.4 0x20(%0), 16(%1) \n\t" \
-+ " move.4 0x24(%0), 20(%1) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
++config SERIAL_UBI32_SERDES
++ bool "Ubicom serial port support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default y
++ help
++ Add support for the Ubicom serial interface.
+
-+#define SEC_SET_KEY_8W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0x10(%0), 0(%1) \n\t" \
-+ " move.4 0x14(%0), 4(%1) \n\t" \
-+ " move.4 0x18(%0), 8(%1) \n\t" \
-+ " move.4 0x1c(%0), 12(%1) \n\t" \
-+ " move.4 0x20(%0), 16(%1) \n\t" \
-+ " move.4 0x24(%0), 20(%1) \n\t" \
-+ " move.4 0x28(%0), 24(%1) \n\t" \
-+ " move.4 0x2c(%0), 28(%1) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
++config SERIAL_UBI32_SERDES_CONSOLE
++ bool "Ubicom serial console support"
++ depends on SERIAL_UBI32_SERDES=y
++ select SERIAL_CORE_CONSOLE
++ default y
+
-+#define SEC_SET_KEY_64(k) SEC_SET_KEY_2W(k)
-+#define SEC_SET_KEY_128(k) SEC_SET_KEY_4W(k)
-+#define SEC_SET_KEY_192(k) SEC_SET_KEY_6W(k)
-+#define SEC_SET_KEY_256(k) SEC_SET_KEY_8W(k)
++config SERIAL_UBI32_MAILBOX
++ bool "Ubicom mailbox support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default n
++ help
++ Add support for the Ubicom mailbox interface.
+
-+#define DES_SET_KEY(x) SEC_SET_KEY_64(x)
-+#define DES3_SET_KEY(x) SEC_SET_KEY_192(x)
++config SERIAL_UBI32_MAILBOX_CONSOLE
++ bool "Ubicom mailbox console support"
++ depends on SERIAL_UBI32_MAILBOX=y
++ select SERIAL_CORE_CONSOLE
++ default y
+
-+#define SEC_SET_INPUT_2W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0x30(%0), 0(%1) \n\t" \
-+ " move.4 0x34(%0), 4(%1) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
+ config SERIAL_SUNCORE
+ bool
+ depends on SPARC
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -77,3 +77,6 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIA
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
++obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
++obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -196,6 +196,15 @@ config SPI_S3C24XX
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs
+
++config SPI_UBICOM32_GPIO
++ tristate "Ubicom32 SPI over GPIO"
++ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
++ select SPI_BITBANG
++ select HAS_DMA
++ help
++ SPI driver for the Ubicom32 architecture using
++ GPIO lines to provide the SPI bus.
+
-+#define SEC_GET_OUTPUT_2W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0(%1), 0x50(%0) \n\t" \
-+ " move.4 4(%1), 0x54(%0) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
+ config SPI_S3C24XX_GPIO
+ tristate "Samsung S3C24XX series SPI by GPIO"
+ depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_ORION) += orion_spi.o
+ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
+ obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
++obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+--- a/drivers/uio/Kconfig
++++ b/drivers/uio/Kconfig
+@@ -89,4 +89,12 @@ config UIO_SERCOS3
+
+ If you compile this as a module, it will be called uio_sercos3.
+
++config UIO_UBICOM32RING
++ tristate "Ubicom32 Ring Buffer driver"
++ default n
++ help
++ Userspace I/O interface for a Ubicom32 Ring Buffer.
+
-+#define SEC_SET_INPUT_4W(x) \
-+ asm volatile ( \
-+ " ; write key to Security Keyblock \n\t" \
-+ " move.4 0x30(%0), 0(%1) \n\t" \
-+ " move.4 0x34(%0), 4(%1) \n\t" \
-+ " move.4 0x38(%0), 8(%1) \n\t" \
-+ " move.4 0x3c(%0), 12(%1) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
++ If you compile this as a module, it will be called uio_ubicom32ring
+
-+#define SEC_GET_OUTPUT_4W(x) \
-+ asm volatile ( \
-+ " ; read output from Security Keyblock \n\t" \
-+ " move.4 0(%1), 0x50(%0) \n\t" \
-+ " move.4 4(%1), 0x54(%0) \n\t" \
-+ " move.4 8(%1), 0x58(%0) \n\t" \
-+ " move.4 12(%1), 0x5c(%0) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
+ endif
+--- a/drivers/uio/Makefile
++++ b/drivers/uio/Makefile
+@@ -5,3 +5,4 @@ obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdr
+ obj-$(CONFIG_UIO_SMX) += uio_smx.o
+ obj-$(CONFIG_UIO_AEC) += uio_aec.o
+ obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
++obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
+--- a/drivers/usb/gadget/epautoconf.c
++++ b/drivers/usb/gadget/epautoconf.c
+@@ -154,6 +154,10 @@ ep_matches (
+ /* configure your hardware with enough buffering!! */
+ }
+ break;
+
-+#define SEC_SET_IV_4W(x) \
-+ asm volatile ( \
-+ " ; write IV to Security Keyblock \n\t" \
-+ " move.4 0x50(%0), 0(%1) \n\t" \
-+ " move.4 0x54(%0), 4(%1) \n\t" \
-+ " move.4 0x58(%0), 8(%1) \n\t" \
-+ " move.4 0x5c(%0), 12(%1) \n\t" \
-+ : \
-+ : "a" (SECURITY_BASE), "a" (x) \
-+ )
++ case USB_ENDPOINT_XFER_BULK:
++ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
++ return 0;
+ }
+
+ /* MATCH!! */
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
+ default y if PCMCIA && !M32R # sl811_cs
+ default y if ARM # SL-811
+ default y if SUPERH # r8a66597-hcd
++ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
+ default PCI
+
+ # many non-PCI SOC chips embed OHCI
+--- a/drivers/usb/musb/Kconfig
++++ b/drivers/usb/musb/Kconfig
+@@ -12,7 +12,7 @@ config USB_MUSB_HDRC
+ depends on !SUPERH
+ select TWL4030_USB if MACH_OMAP_3430SDP
+ select USB_OTG_UTILS
+- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
++ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)'
+ help
+ Say Y here if your system has a dual role high speed USB
+ controller based on the Mentor Graphics silicon IP. Then
+--- a/drivers/usb/musb/Makefile
++++ b/drivers/usb/musb/Makefile
+@@ -30,6 +30,10 @@ ifeq ($(CONFIG_BF52x),y)
+ musb_hdrc-objs += blackfin.o
+ endif
+
++ifeq ($(CONFIG_UBICOM32), y)
++ musb_hdrc-objs += ubi32_usb.o
++endif
+
-+#define SEC_PIPE_FLUSH() asm volatile ( " pipe_flush 0 \n\t" )
+ ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+ musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
+ endif
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -105,6 +105,13 @@
+ #include <asm/mach-types.h>
+ #endif
+
++#ifdef CONFIG_UBICOM32
++#include <asm/ip5000.h>
++#include <asm/ubicom32-tio.h>
++extern void ubi32_usb_init(void);
++extern void ubi32_usb_int_clr(void);
++#endif
+
-+static inline void hw_crypto_set_ctrl(uint32_t c)
-+{
-+ asm volatile (
-+ " move.4 0(%0), %1 \n\t"
-+ :
-+ : "a" (SECURITY_BASE + SECURITY_CTRL), "d" (c)
-+ );
-+}
+ #include "musb_core.h"
+
+
+@@ -147,8 +154,37 @@ static inline struct musb *dev_to_musb(s
+ }
+
+ /*-------------------------------------------------------------------------*/
++#if defined(CONFIG_UBICOM32)
+
-+static inline void hw_crypto_ps_start(void)
++/*
++ * Load an endpoint's FIFO
++ */
++void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
+{
-+ crypto_ubicom32_ps_timer.expires = jiffies + msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS >> 1);
-+ add_timer(&crypto_ubicom32_ps_timer);
-+}
++ void __iomem *fifo = hw_ep->fifo;
+
-+static inline void hw_crypto_turn_on(void)
-+{
-+ asm volatile (
-+ " moveai A4, %0 \n\t"
-+ " bset 0x0(A4), 0x0(A4), %1 \n\t"
-+ " cycles 11 \n\t"
-+ :
-+ : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO)
-+ : "a4", "cc"
-+ );
-+ crypto_ubicom32_on = true;
-+}
++ prefetch((u8 *)pSource);
+
-+static inline void hw_crypto_turn_off(void)
-+{
-+ asm volatile (
-+ " moveai A4, %0 \n\t"
-+ " bclr 0x0(A4), 0x0(A4), %1 \n\t"
-+ :
-+ : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO)
-+ : "a4", "cc"
-+ );
-+ crypto_ubicom32_on = false;
-+}
++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
++ 'T', hw_ep->epnum, fifo, wCount, pSource);
+
-+/*
-+ * hw_crypto_check
-+ * Most probably hw crypto is called in clusters and it makes no sense to turn it off
-+ * and on and waster 13 cycles every time.
-+ */
-+static inline void hw_crypto_check(void)
-+{
-+ if (likely(crypto_ubicom32_on)) {
-+ return;
-+ }
-+ crypto_ubicom32_last_use = jiffies;
-+ hw_crypto_turn_on();
-+ hw_crypto_ps_start();
-+}
++ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
+
-+/*
-+ * hw_crypto_ps_init
-+ * Init power save timer
-+ */
-+static inline void hw_crypto_ps_init(void)
-+{
-+ init_timer_deferrable(&crypto_ubicom32_ps_timer);
-+ crypto_ubicom32_ps_timer.function = crypto_ubicom32_ps_check;
-+ crypto_ubicom32_ps_timer.data = 0;
+}
+
+/*
-+ * hw_crypto_init()
-+ * Initialize OCP security module lock and disables its clock.
++ * Unload an endpoint's FIFO
+ */
-+static inline void hw_crypto_init(void)
++void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
+{
-+ if (!crypto_ubicom32_inited) {
-+ crypto_ubicom32_inited = true;
-+ spin_lock_init(&crypto_ubicom32_lock);
-+ hw_crypto_ps_init();
-+ hw_crypto_turn_off();
-+ }
-+}
+
-+/*
-+ * hw_crypto_lock()
-+ * Locks the OCP security module and enables its clock.
-+ */
-+static inline void hw_crypto_lock(void)
-+{
-+ spin_lock_bh(&crypto_ubicom32_lock);
-+}
-+
-+/*
-+ * hw_crypto_unlock()
-+ * Unlocks the OCP security module and disables its clock.
-+ */
-+static inline void hw_crypto_unlock(void)
-+{
-+ crypto_ubicom32_last_use = jiffies;
-+ spin_unlock_bh(&crypto_ubicom32_lock);
-+}
-+
-+#define CONFIG_CRYPTO_UBICOM32_DEBUG 1
-+
-+#ifdef CONFIG_CRYPTO_UBICOM32_DEBUG
-+static inline void hex_dump(void *buf, int b_size, const char *msg)
-+{
-+ u8 *b = (u8 *)buf;
-+ int i;
-+ if (msg) {
-+ printk("%s:\t", msg);
-+ }
-+
-+ for (i=0; i < b_size; i++) {
-+ printk("%02x ", b[i]);
-+ if ((i & 3) == 3) {
-+ printk(" ");
-+ }
-+ if ((i & 31) == 31) {
-+ printk("\n");
-+ }
-+ }
-+ printk("\n");
++ void __iomem *fifo = hw_ep->fifo;
++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
++ 'R', hw_ep->epnum, fifo, wCount, pDest);
++ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
+}
-+#define UBICOM32_SEC_DUMP(a, b, c) hex_dump(a, b, c)
+
+-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
++#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+
+ /*
+ * Load an endpoint's FIFO
+@@ -227,8 +263,7 @@ void musb_read_fifo(struct musb_hw_ep *h
+ readsb(fifo, dst, len);
+ }
+ }
+-
+-#endif /* normal PIO */
++#endif /* !T6010 && !BLACKFIN */
+
+
+ /*-------------------------------------------------------------------------*/
+@@ -874,12 +909,19 @@ void musb_start(struct musb *musb)
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
++#ifndef CONFIG_UBICOM32
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_SOFTCONN
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
+#else
-+#define UBICOM32_SEC_DUMP(a, b, c)
++ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
++ /* ENSUSPEND wedges tusb */
++ /* | MUSB_POWER_ENSUSPEND */
++ );
+#endif
-+
-+#endif /* _CRYPTO_ARCH_UBICOM32_CRYPT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/des_check_key.c linux-2.6.30.10-ubi/arch/ubicom32/crypto/des_check_key.c
---- linux-2.6.30.10/arch/ubicom32/crypto/des_check_key.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/des_check_key.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,148 @@
-+/*
-+ * arch/ubicom32/crypto/des_check_key.c
-+ * Ubicom32 architecture function for checking keys for the DES and
-+ * Tripple DES Encryption algorithms.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * Originally released as descore by Dana L. How <how@isl.stanford.edu>.
-+ * Modified by Raimar Falke <rf13@inf.tu-dresden.de> for the Linux-Kernel.
-+ * Derived from Cryptoapi and Nettle implementations, adapted for in-place
-+ * scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL.
-+ *
-+ * s390 Version:
-+ * Copyright IBM Corp. 2003
-+ * Author(s): Thomas Spatzier
-+ * Jan Glauber (jan.glauber@de.ibm.com)
-+ *
-+ * Derived from "crypto/des.c"
-+ * Copyright (c) 1992 Dana L. How.
-+ * Copyright (c) Raimar Falke <rf13@inf.tu-dresden.de>
-+ * Copyright (c) Gisle Sflensminde <gisle@ii.uib.no>
-+ * Copyright (C) 2001 Niels Mvller.
-+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/crypto.h>
-+#include "crypto_des.h"
-+
-+#define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o))
-+
-+static const u8 parity[] = {
-+ 8,1,0,8,0,8,8,0,0,8,8,0,8,0,2,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,3,
-+ 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
-+ 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
-+ 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
-+ 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
-+ 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
-+ 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
-+ 4,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,5,0,8,0,8,8,0,0,8,8,0,8,0,6,8,
-+};
-+
-+/*
-+ * RFC2451: Weak key checks SHOULD be performed.
-+ */
-+int
-+crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags)
-+{
-+ u32 n, w;
-+
-+ n = parity[key[0]]; n <<= 4;
-+ n |= parity[key[1]]; n <<= 4;
-+ n |= parity[key[2]]; n <<= 4;
-+ n |= parity[key[3]]; n <<= 4;
-+ n |= parity[key[4]]; n <<= 4;
-+ n |= parity[key[5]]; n <<= 4;
-+ n |= parity[key[6]]; n <<= 4;
-+ n |= parity[key[7]];
-+ w = 0x88888888L;
-+
-+ if ((*flags & CRYPTO_TFM_REQ_WEAK_KEY)
-+ && !((n - (w >> 3)) & w)) { /* 1 in 10^10 keys passes this test */
-+ if (n < 0x41415151) {
-+ if (n < 0x31312121) {
-+ if (n < 0x14141515) {
-+ /* 01 01 01 01 01 01 01 01 */
-+ if (n == 0x11111111) goto weak;
-+ /* 01 1F 01 1F 01 0E 01 0E */
-+ if (n == 0x13131212) goto weak;
-+ } else {
-+ /* 01 E0 01 E0 01 F1 01 F1 */
-+ if (n == 0x14141515) goto weak;
-+ /* 01 FE 01 FE 01 FE 01 FE */
-+ if (n == 0x16161616) goto weak;
-+ }
-+ } else {
-+ if (n < 0x34342525) {
-+ /* 1F 01 1F 01 0E 01 0E 01 */
-+ if (n == 0x31312121) goto weak;
-+ /* 1F 1F 1F 1F 0E 0E 0E 0E (?) */
-+ if (n == 0x33332222) goto weak;
-+ } else {
-+ /* 1F E0 1F E0 0E F1 0E F1 */
-+ if (n == 0x34342525) goto weak;
-+ /* 1F FE 1F FE 0E FE 0E FE */
-+ if (n == 0x36362626) goto weak;
-+ }
-+ }
-+ } else {
-+ if (n < 0x61616161) {
-+ if (n < 0x44445555) {
-+ /* E0 01 E0 01 F1 01 F1 01 */
-+ if (n == 0x41415151) goto weak;
-+ /* E0 1F E0 1F F1 0E F1 0E */
-+ if (n == 0x43435252) goto weak;
-+ } else {
-+ /* E0 E0 E0 E0 F1 F1 F1 F1 (?) */
-+ if (n == 0x44445555) goto weak;
-+ /* E0 FE E0 FE F1 FE F1 FE */
-+ if (n == 0x46465656) goto weak;
-+ }
-+ } else {
-+ if (n < 0x64646565) {
-+ /* FE 01 FE 01 FE 01 FE 01 */
-+ if (n == 0x61616161) goto weak;
-+ /* FE 1F FE 1F FE 0E FE 0E */
-+ if (n == 0x63636262) goto weak;
-+ } else {
-+ /* FE E0 FE E0 FE F1 FE F1 */
-+ if (n == 0x64646565) goto weak;
-+ /* FE FE FE FE FE FE FE FE */
-+ if (n == 0x66666666) goto weak;
-+ }
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+@@ -1081,6 +1123,7 @@ static struct fifo_cfg __initdata mode_4
+ };
+
+
++#ifndef CONFIG_UBICOM32
+ /*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+@@ -1240,7 +1283,7 @@ static int __init ep_config_from_table(s
+
+ return 0;
+ }
+-
++#endif /* CONFIG_UBICOM32 */
+
+ /*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+@@ -1256,6 +1299,11 @@ static int __init ep_config_from_hw(stru
+ DBG(2, "<== static silicon ep config\n");
+
+ /* FIXME pick up ep0 maxpacket size */
++#ifdef CONFIG_UBICOM32
++ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
++ hw_ep = musb->endpoints;
++ hw_ep->is_shared_fifo = true;
++#endif
+
+ for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+ musb_ep_select(mbase, epnum);
+@@ -1276,14 +1324,27 @@ static int __init ep_config_from_hw(stru
+ /* REVISIT: this algorithm is lazy, we should at least
+ * try to pick a double buffered endpoint.
+ */
++#ifndef CONFIG_UBICOM32
+ if (musb->bulk_ep)
+ continue;
+ musb->bulk_ep = hw_ep;
++#else
++ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
++ continue;
++ /* Save theEP with 1024 Bytes FIFO for ISO */
++ if(hw_ep->max_packet_sz_tx == 512) {
++ if (!musb->bulk_ep_in) {
++ musb->bulk_ep_in = hw_ep;
++ } else if (!musb->bulk_ep_out) {
++ musb->bulk_ep_out = hw_ep;
+ }
+ }
-+ }
-+ return 0;
-+weak:
-+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
-+ return -EINVAL;
-+}
-+
-+EXPORT_SYMBOL(crypto_des_check_key);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Key Check function for DES & DES3 Cipher Algorithms");
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/des_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/crypto/des_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/crypto/des_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/des_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,761 @@
-+/*
-+ * arch/ubicom32/crypto/des_ubicom32.c
-+ * Ubicom32 implementation of the DES Cipher Algorithm.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <crypto/algapi.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include "crypto_ubicom32.h"
-+extern int crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags);
-+
-+#define DES_BLOCK_SIZE 8
-+#define DES_KEY_SIZE 8
-+
-+#define DES3_192_KEY_SIZE (3 * DES_KEY_SIZE)
-+#define DES3_192_BLOCK_SIZE DES_BLOCK_SIZE
-+
-+#define DES3_SUB_KEY(key, i) (((u8 *)key) + (i * DES_KEY_SIZE))
-+
-+enum des_ops {
-+ DES_ENCRYPT,
-+ DES_DECRYPT,
-+
-+ DES3_EDE_ENCRYPT,
-+ DES3_EDE_DECRYPT,
-+
-+#ifdef DES3_EEE
-+ DES3_EEE_ENCRYPT,
-+ DES3_EEE_DECRYPT,
++#endif /* CONFIG_UBICOM32 */
+ #endif
+ }
+
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+- if (!musb->bulk_ep) {
++ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
+ pr_debug("%s: missing bulk\n", musb_driver_name);
+ return -EINVAL;
+ }
+@@ -1393,12 +1454,16 @@ static int __init musb_core_init(u16 mus
+ musb->epmask = 1;
+
+ if (reg & MUSB_CONFIGDATA_DYNFIFO) {
++#ifndef CONFIG_UBICOM32
+ if (musb->config->dyn_fifo)
+ status = ep_config_from_table(musb);
+- else {
++ else
+#endif
-+};
-+
-+struct ubicom32_des_ctx {
-+ u8 key[3 * DES_KEY_SIZE];
-+ u32 ctrl;
-+ int key_len;
-+};
-+
-+static inline void des_hw_set_key(const u8 *key, u8 key_len)
-+{
-+ /*
-+ * HW 3DES is not tested yet, use DES just as ipOS
-+ */
-+ DES_SET_KEY(key);
-+}
-+
-+static inline void des_hw_cipher(u8 *out, const u8 *in)
-+{
-+ SEC_SET_INPUT_2W(in);
-+
-+ asm volatile (
-+ " ; start DES by writing 0x38(SECURITY_BASE) \n\t"
-+ " move.4 0x38(%0), #0x01 \n\t"
-+ " pipe_flush 0 \n\t"
-+ " \n\t"
-+ " ; wait for the module to calculate the output \n\t"
-+ " btst 0x04(%0), #0 \n\t"
-+ " jmpne.f .-4 \n\t"
-+ :
-+ : "a" (SEC_BASE)
-+ : "cc"
-+ );
-+
-+ SEC_GET_OUTPUT_2W(out);
-+}
-+
-+
-+static void inline des3_hw_ede_encrypt(u8 *keys, u8 *out, const u8 *in)
-+{
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE);
-+ des_hw_cipher(out, in);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE);
-+ des_hw_cipher(out, out);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE);
-+ des_hw_cipher(out, out);
-+}
-+
-+static void inline des3_hw_ede_decrypt(u8 *keys, u8 *out, const u8 *in)
-+{
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE);
-+ des_hw_cipher(out, in);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE);
-+ des_hw_cipher(out, out);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE);
-+ des_hw_cipher(out, out);
-+}
-+
-+#ifdef DES3_EEE
-+static void inline des3_hw_eee_encrypt(u8 *keys, u8 *out, const u8 *in)
-+{
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 0), 2);
-+ des_hw_cipher(out, in);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 1), 2);
-+ des_hw_cipher(out, out);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 2), 2);
-+ des_hw_cipher(out, out);
-+}
-+
-+static void inline des3_hw_eee_decrypt(u8 *keys, u8 *out, const u8 *in)
-+{
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 2), 2);
-+ des_hw_cipher(out, in);
-+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 1), 2);
-+ des_hw_cipher(out, out);
++ {
+ ERR("reconfigure software for Dynamic FIFOs\n");
+ status = -ENODEV;
+ }
+
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(DES3_SUB_KEY(keys, 0), 2);
-+ des_hw_cipher(out, out);
-+}
+ } else {
+ if (!musb->config->dyn_fifo)
+ status = ep_config_from_hw(musb);
+@@ -1462,8 +1527,8 @@ static int __init musb_core_init(u16 mus
+
+ /*-------------------------------------------------------------------------*/
+
+-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+-
++#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
++static u32_t musb_int_count = 0;
+ static irqreturn_t generic_interrupt(int irq, void *__hci)
+ {
+ unsigned long flags;
+@@ -1472,10 +1537,17 @@ static irqreturn_t generic_interrupt(int
+
+ spin_lock_irqsave(&musb->lock, flags);
+
++#ifndef CONFIG_UBICOM32
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
++#else
++ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
++ //ubi32_usb_int_clr();
++ musb_int_count++;
++#endif
+
++ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+@@ -2210,6 +2282,10 @@ static struct platform_driver musb_drive
+
+ static int __init musb_init(void)
+ {
++#ifdef CONFIG_UBICOM32
++ ubi32_usb_init();
+#endif
+
-+static int des_setkey(struct crypto_tfm *tfm, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm);
-+ u32 *flags = &tfm->crt_flags;
-+ int ret;
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+ if (usb_disabled())
+ return 0;
+--- a/drivers/usb/musb/musb_core.h
++++ b/drivers/usb/musb/musb_core.h
+@@ -326,7 +326,12 @@ struct musb {
+ * queue until it completes or NAKs too much; then we try the next
+ * endpoint.
+ */
++#ifdef CONFIG_UBICOM32
++ struct musb_hw_ep *bulk_ep_in;
++ struct musb_hw_ep *bulk_ep_out;
++#else
+ struct musb_hw_ep *bulk_ep;
++#endif
+
+ struct list_head control; /* of musb_qh */
+ struct list_head in_bulk; /* of musb_qh */
+--- a/drivers/usb/musb/musb_gadget.c
++++ b/drivers/usb/musb/musb_gadget.c
+@@ -432,7 +432,7 @@ void musb_g_tx(struct musb *musb, u8 epn
+ * probably rates reporting as a host error
+ */
+ if (csr & MUSB_TXCSR_P_SENTSTALL) {
+- csr |= MUSB_TXCSR_P_WZC_BITS;
++ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_P_SENTSTALL;
+ musb_writew(epio, MUSB_TXCSR, csr);
+ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+@@ -448,7 +448,7 @@ void musb_g_tx(struct musb *musb, u8 epn
+
+ if (csr & MUSB_TXCSR_P_UNDERRUN) {
+ /* we NAKed, no big deal ... little reason to care */
+- csr |= MUSB_TXCSR_P_WZC_BITS;
++ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN
+ | MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR, csr);
+@@ -584,10 +584,16 @@ static void rxstate(struct musb *musb, s
+ u16 csr = 0;
+ const u8 epnum = req->epnum;
+ struct usb_request *request = &req->request;
+- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
++ struct musb_ep *musb_ep = NULL;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+- unsigned fifo_count = 0;
+- u16 len = musb_ep->packet_sz;
++ u16 fifo_count = 0;
++ u16 len = 0;
+
-+ /* test if key is valid (not a weak key) */
-+ ret = crypto_des_check_key(key, keylen, flags);
-+ if (ret == 0) {
-+ memcpy(dctx->key, key, keylen);
-+ dctx->key_len = keylen;
-+ //dctx->ctrl = (keylen == DES_KEY_SIZE) ? SEC_ALG_DES : SEC_ALG_3DES
-+ /* 2DES and 3DES are both implemented with DES hw function */
-+ dctx->ctrl = SEC_ALG_DES;
-+ }
-+ return ret;
-+}
-+
-+static inline void des_cipher_1b(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags)
-+{
-+ const struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
-+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
-+
-+ des_hw_set_key(uctx->key, uctx->key_len);
-+ des_hw_cipher(out, in);
-+
-+ hw_crypto_unlock();
-+}
-+
-+static void des_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+ des_cipher_1b(tfm, out, in, SEC_DIR_ENCRYPT);
-+}
-+
-+static void des_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
-+{
-+ des_cipher_1b(tfm, out, in, SEC_DIR_DECRYPT);
-+}
-+
-+static struct crypto_alg des_alg = {
-+ .cra_name = "des",
-+ .cra_driver_name = "des-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
-+ .cra_blocksize = DES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(des_alg.cra_list),
-+ .cra_u = {
-+ .cipher = {
-+ .cia_min_keysize = DES_KEY_SIZE,
-+ .cia_max_keysize = DES_KEY_SIZE,
-+ .cia_setkey = des_setkey,
-+ .cia_encrypt = des_encrypt,
-+ .cia_decrypt = des_decrypt,
-+ }
-+ }
-+};
-+
-+static void ecb_des_ciper_loop(u8 *out, u8 *in, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des_hw_cipher(out, in);
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void ecb_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des3_hw_ede_encrypt(keys, out, in);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void ecb_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des3_hw_ede_decrypt(keys, out, in);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+#ifdef DES3_EEE
-+static void ecb_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des3_hw_eee_encrypt(keys, out, in);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void ecb_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des3_hw_eee_decrypt(keys, out, in);
++ if (musb->endpoints[epnum].is_shared_fifo)
++ musb_ep = &musb->endpoints[epnum].ep_in;
++ else
++ musb_ep = &musb->endpoints[epnum].ep_out;
++ len = musb_ep->packet_sz;
+
+ csr = musb_readw(epio, MUSB_RXCSR);
+
+@@ -726,7 +732,7 @@ static void rxstate(struct musb *musb, s
+ */
+
+ /* ack the read! */
+- csr |= MUSB_RXCSR_P_WZC_BITS;
++ csr &= ~MUSB_RXCSR_P_WZC_BITS;
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
+@@ -745,10 +751,15 @@ void musb_g_rx(struct musb *musb, u8 epn
+ u16 csr;
+ struct usb_request *request;
+ void __iomem *mbase = musb->mregs;
+- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
++ struct musb_ep *musb_ep = NULL;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+ struct dma_channel *dma;
+
++ if (musb->endpoints[epnum].is_shared_fifo)
++ musb_ep = &musb->endpoints[epnum].ep_in;
++ else
++ musb_ep = &musb->endpoints[epnum].ep_out;
+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
+ musb_ep_select(mbase, epnum);
+
+ request = next_request(musb_ep);
+@@ -1769,7 +1780,9 @@ int usb_gadget_register_driver(struct us
+ }
+ }
+ }
+-
++#ifndef CONFIG_USB_MUSB_OTG
++ musb_pullup(musb, 1);
+#endif
-+
-+static inline void ecb_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, unsigned int n)
-+{
-+ switch (op) {
-+ case DES_ENCRYPT:
-+ case DES_DECRYPT:
-+ /* set the right algo, direction and key once */
-+ hw_crypto_set_ctrl(SEC_ALG_DES | (op == DES_ENCRYPT ? SEC_DIR_ENCRYPT : 0));
-+ des_hw_set_key(uctx->key, uctx->key_len);
-+ ecb_des_ciper_loop(out, in, n);
-+ break;
-+
-+ case DES3_EDE_ENCRYPT:
-+ ecb_des3_ede_encrypt_loop(uctx->key, out, in, n);
-+ break;
-+
-+ case DES3_EDE_DECRYPT:
-+ ecb_des3_ede_decrypt_loop(uctx->key, out, in, n);
-+ break;
-+
-+#ifdef DES3_EEE
-+ case DES3_EEE_ENCRYPT:
-+ ecb_des3_eee_encrypt_loop(uctx->key, out, in, n);
-+ break;
-+
-+ case DES3_EEE_DECRYPT:
-+ ecb_des3_eee_decrypt_loop(uctx->key, out, in, n);
-+ break;
+ return retval;
+ }
+ EXPORT_SYMBOL(usb_gadget_register_driver);
+--- a/drivers/usb/musb/musb_gadget_ep0.c
++++ b/drivers/usb/musb/musb_gadget_ep0.c
+@@ -240,14 +240,14 @@ __acquires(musb->lock)
+ case USB_REQ_SET_ADDRESS:
+ /* change it after the status stage */
+ musb->set_address = true;
+- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
++ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
+ handled = 1;
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+- if (ctrlrequest->wValue
++ if (le16_to_cpu(ctrlrequest->wValue)
+ != USB_DEVICE_REMOTE_WAKEUP)
+ break;
+ musb->may_wakeup = 0;
+@@ -261,8 +261,8 @@ __acquires(musb->lock)
+
+ if (num == 0
+ || num >= MUSB_C_NUM_EPS
+- || ctrlrequest->wValue
+- != USB_ENDPOINT_HALT)
++ || le16_to_cpu(ctrlrequest->wValue
++ != USB_ENDPOINT_HALT))
+ break;
+
+ if (ctrlrequest->wIndex & USB_DIR_IN)
+@@ -292,7 +292,7 @@ __acquires(musb->lock)
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+ handled = 1;
+- switch (ctrlrequest->wValue) {
++ switch (le16_to_cpu(ctrlrequest->wValue)) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ musb->may_wakeup = 1;
+ break;
+@@ -374,8 +374,8 @@ stall:
+
+ if (epnum == 0
+ || epnum >= MUSB_C_NUM_EPS
+- || ctrlrequest->wValue
+- != USB_ENDPOINT_HALT)
++ || le16_to_cpu(ctrlrequest->wValue
++ != USB_ENDPOINT_HALT))
+ break;
+
+ ep = musb->endpoints + epnum;
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -160,7 +160,11 @@ static inline void musb_h_tx_start(struc
+ /* NOTE: no locks here; caller should lock and select EP */
+ if (ep->epnum) {
+ txcsr = musb_readw(ep->regs, MUSB_TXCSR);
++#ifndef CONFIG_UBICOM32
+ txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
++#else
++ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
+#endif
-+ }
-+}
-+
-+static inline void des_xor_2w(u32 *data, u32 *iv)
-+{
-+ data[0] ^= iv[0];
-+ data[1] ^= iv[1];
-+}
-+
-+static void cbc_des_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des_xor_2w((u32 *)in, (u32 *)iv);
-+ des_hw_cipher(out, in);
-+ SEC_COPY_2W(iv, out);
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void cbc_des_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ u8 next_iv[DES_BLOCK_SIZE];
-+ while (likely(n)) {
-+ SEC_COPY_2W(next_iv, in);
-+ des_hw_cipher(out, in);
-+ des_xor_2w((u32 *)out, (u32 *)iv);
-+ SEC_COPY_2W(iv, next_iv);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void cbc_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des_xor_2w((u32 *)in, (u32 *)iv);
-+ des3_hw_ede_encrypt(keys, out, in);
-+ SEC_COPY_2W(iv, out);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void cbc_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ u8 next_iv[DES_BLOCK_SIZE];
-+ while (likely(n)) {
-+ SEC_COPY_2W(next_iv, in);
-+ des3_hw_ede_decrypt(keys, out, in);
-+ des_xor_2w((u32 *)out, (u32 *)iv);
-+ SEC_COPY_2W(iv, next_iv);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+#ifdef DES3_EEE
-+static void cbc_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ while (likely(n)) {
-+ des_xor_2w((u32 *)in, (u32 *)iv);
-+ des3_hw_eee_encrypt(keys, out, in);
-+ SEC_COPY_2W(iv, out);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
-+
-+static void cbc_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ u8 next_iv[DES_BLOCK_SIZE];
-+ while (likely(n)) {
-+ SEC_COPY_2W(next_iv, in);
-+ des3_hw_eee_decrypt(keys, out, in);
-+ des_xor_2w((u32 *)out, (u32 *)iv);
-+ SEC_COPY_2W(iv, next_iv);
-+
-+ out += DES_BLOCK_SIZE;
-+ in += DES_BLOCK_SIZE;
-+ n -= DES_BLOCK_SIZE;
-+ }
-+}
+ musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+ } else {
+ txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+@@ -223,6 +227,8 @@ musb_start_urb(struct musb *musb, int is
+ break;
+ default: /* bulk, interrupt */
+ /* actual_length may be nonzero on retry paths */
++ if (urb->actual_length)
++ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
+ buf = urb->transfer_buffer + urb->actual_length;
+ len = urb->transfer_buffer_length - urb->actual_length;
+ }
+@@ -342,13 +348,13 @@ musb_save_toggle(struct musb_hw_ep *ep,
+ if (!is_in) {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ usb_settoggle(udev, qh->epnum, 1,
+- (csr & MUSB_TXCSR_H_DATATOGGLE)
+- ? 1 : 0);
++ ((csr & MUSB_TXCSR_H_DATATOGGLE)
++ ? 1 : 0));
+ } else {
+ csr = musb_readw(epio, MUSB_RXCSR);
+ usb_settoggle(udev, qh->epnum, 0,
+- (csr & MUSB_RXCSR_H_DATATOGGLE)
+- ? 1 : 0);
++ ((csr & MUSB_RXCSR_H_DATATOGGLE)
++ ? 1 : 0));
+ }
+ }
+
+@@ -556,7 +562,11 @@ musb_host_packet_rx(struct musb *musb, s
+ musb_read_fifo(hw_ep, length, buf);
+
+ csr = musb_readw(epio, MUSB_RXCSR);
++#ifndef CONFIG_UBICOM32
+ csr |= MUSB_RXCSR_H_WZC_BITS;
++#else
++ csr &= ~MUSB_RXCSR_H_WZC_BITS;
+#endif
+ if (unlikely(do_flush))
+ musb_h_flush_rxfifo(hw_ep, csr);
+ else {
+@@ -590,6 +600,7 @@ musb_rx_reinit(struct musb *musb, struct
+
+ /* if programmed for Tx, put it in RX mode */
+ if (ep->is_shared_fifo) {
++#ifndef CONFIG_UBICOM32
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
+ if (csr & MUSB_TXCSR_MODE) {
+ musb_h_tx_flush_fifo(ep);
+@@ -604,7 +615,18 @@ musb_rx_reinit(struct musb *musb, struct
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
+
-+static inline void cbc_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, u8 *iv, unsigned int n)
-+{
-+ switch (op) {
-+ case DES_ENCRYPT:
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
-+ des_hw_set_key(uctx->key, uctx->key_len);
-+ cbc_des_encrypt_loop(out, in, iv, n);
-+ break;
-+
-+ case DES_DECRYPT:
-+ /* set the right algo, direction and key once */
-+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
-+ des_hw_set_key(uctx->key, uctx->key_len);
-+ cbc_des_decrypt_loop(out, in, iv, n);
-+ break;
-+
-+ case DES3_EDE_ENCRYPT:
-+ cbc_des3_ede_encrypt_loop(uctx->key, out, in, iv, n);
-+ break;
-+
-+ case DES3_EDE_DECRYPT:
-+ cbc_des3_ede_decrypt_loop(uctx->key, out, in, iv, n);
-+ break;
-+
-+#ifdef DES3_EEE
-+ case DES3_EEE_ENCRYPT:
-+ cbc_des3_eee_encrypt_loop(uctx->key, out, in, iv, n);
-+ break;
++#else
++ /* clear mode (and everything else) to enable Rx */
+ musb_writew(ep->regs, MUSB_TXCSR, 0);
++ /* scrub all previous state, clearing toggle */
++ csr = musb_readw(ep->regs, MUSB_RXCSR);
++ if (csr & MUSB_RXCSR_RXPKTRDY)
++ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
++ musb_readw(ep->regs, MUSB_RXCOUNT));
+
-+ case DES3_EEE_DECRYPT:
-+ cbc_des3_eee_decrypt_loop(uctx->key, out, in, iv, n);
-+ break;
++ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+#endif
+
+ /* scrub all previous state, clearing toggle */
+ } else {
+@@ -1138,8 +1160,18 @@ void musb_host_tx(struct musb *musb, u8
+ void __iomem *mbase = musb->mregs;
+ struct dma_channel *dma;
+
++#ifdef CONFIG_UBICOM32
++ if (hw_ep->is_shared_fifo) {
++ qh = hw_ep->in_qh;
+ }
-+}
-+
-+static int des_cipher(struct blkcipher_desc *desc, struct scatterlist *dst,
-+ struct scatterlist *src, unsigned int nbytes, u32 extra_flags, enum des_ops op)
-+{
-+ struct ubicom32_des_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
-+ int ret;
-+
-+ struct blkcipher_walk walk;
-+ blkcipher_walk_init(&walk, dst, src, nbytes);
-+ ret = blkcipher_walk_virt(desc, &walk);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
++ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
++ dma ? ", dma" : "");
++#endif
++#endif
+ urb = next_urb(qh);
+
+
-+ while ((nbytes = walk.nbytes)) {
-+ /* only use complete blocks */
-+ unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
-+ u8 *out = walk.dst.virt.addr;
-+ u8 *in = walk.src.virt.addr;
-+
-+ /* finish n/16 blocks */
-+ if (extra_flags & SEC_CBC_SET) {
-+ cbc_des_cipher_n(uctx, op, out, in, walk.iv, n);
-+ } else {
-+ ecb_des_cipher_n(uctx, op, out, in, n);
-+ }
-+
-+ nbytes &= DES_BLOCK_SIZE - 1;
-+ ret = blkcipher_walk_done(desc, &walk, nbytes);
-+ }
-+
-+ hw_crypto_unlock();
-+ return ret;
-+}
-+
-+static int ecb_des_encrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_ENCRYPT);
-+}
-+
-+static int ecb_des_decrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_DECRYPT);
-+}
-+
-+static struct crypto_alg ecb_des_alg = {
-+ .cra_name = "ecb(des)",
-+ .cra_driver_name = "ecb-des-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
-+ .cra_blocksize = DES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_type = &crypto_blkcipher_type,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(ecb_des_alg.cra_list),
-+ .cra_u = {
-+ .blkcipher = {
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ .setkey = des_setkey,
-+ .encrypt = ecb_des_encrypt,
-+ .decrypt = ecb_des_decrypt,
-+ }
-+ }
-+};
-+
-+static int cbc_des_encrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_ENCRYPT);
-+}
-+
-+static int cbc_des_decrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst, struct scatterlist *src,
-+ unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_DECRYPT);
-+}
-+
-+static struct crypto_alg cbc_des_alg = {
-+ .cra_name = "cbc(des)",
-+ .cra_driver_name = "cbc-des-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
-+ .cra_blocksize = DES_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_type = &crypto_blkcipher_type,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(cbc_des_alg.cra_list),
-+ .cra_u = {
-+ .blkcipher = {
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ .ivsize = DES_BLOCK_SIZE,
-+ .setkey = des_setkey,
-+ .encrypt = cbc_des_encrypt,
-+ .decrypt = cbc_des_decrypt,
-+ }
-+ }
-+};
-+
-+/*
-+ * RFC2451:
-+ *
-+ * For DES-EDE3, there is no known need to reject weak or
-+ * complementation keys. Any weakness is obviated by the use of
-+ * multiple keys.
-+ *
-+ * However, if the first two or last two independent 64-bit keys are
-+ * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
-+ * same as DES. Implementers MUST reject keys that exhibit this
-+ * property.
-+ *
-+ */
-+static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key,
-+ unsigned int keylen)
-+{
-+ int i, ret;
-+ struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm);
-+ const u8 *temp_key = key;
-+ u32 *flags = &tfm->crt_flags;
-+
-+ if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
-+ memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
-+ DES_KEY_SIZE))) {
-+
-+ *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
-+ return -EINVAL;
-+ }
-+ for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
-+ ret = crypto_des_check_key(temp_key, DES_KEY_SIZE, flags);
-+ if (ret < 0)
-+ return ret;
-+ }
-+ memcpy(dctx->key, key, keylen);
-+ dctx->ctrl = SEC_ALG_DES; //hw 3DES not working yet
-+ dctx->key_len = keylen;
-+ return 0;
-+}
-+
-+static void des3_192_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+ struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
-+
-+ des3_hw_ede_encrypt(uctx->key, dst, src);
-+
-+ hw_crypto_unlock();
-+}
-+
-+static void des3_192_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-+{
-+ struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
-+
-+ des3_hw_ede_decrypt(uctx->key, dst, src);
-+
-+ hw_crypto_unlock();
-+}
-+
-+static struct crypto_alg des3_192_alg = {
-+ .cra_name = "des3_ede",
-+ .cra_driver_name = "des3_ede-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
-+ .cra_blocksize = DES3_192_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(des3_192_alg.cra_list),
-+ .cra_u = {
-+ .cipher = {
-+ .cia_min_keysize = DES3_192_KEY_SIZE,
-+ .cia_max_keysize = DES3_192_KEY_SIZE,
-+ .cia_setkey = des3_192_setkey,
-+ .cia_encrypt = des3_192_encrypt,
-+ .cia_decrypt = des3_192_decrypt,
-+ }
-+ }
-+};
-+
-+static int ecb_des3_192_encrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst,
-+ struct scatterlist *src, unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_ENCRYPT);
-+}
-+
-+static int ecb_des3_192_decrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst,
-+ struct scatterlist *src, unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_DECRYPT);
-+}
-+
-+static struct crypto_alg ecb_des3_192_alg = {
-+ .cra_name = "ecb(des3_ede)",
-+ .cra_driver_name = "ecb-des3_ede-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
-+ .cra_blocksize = DES3_192_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_type = &crypto_blkcipher_type,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(
-+ ecb_des3_192_alg.cra_list),
-+ .cra_u = {
-+ .blkcipher = {
-+ .min_keysize = DES3_192_KEY_SIZE,
-+ .max_keysize = DES3_192_KEY_SIZE,
-+ .setkey = des3_192_setkey,
-+ .encrypt = ecb_des3_192_encrypt,
-+ .decrypt = ecb_des3_192_decrypt,
-+ }
-+ }
-+};
-+
-+static int cbc_des3_192_encrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst,
-+ struct scatterlist *src, unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_ENCRYPT);
-+}
-+
-+static int cbc_des3_192_decrypt(struct blkcipher_desc *desc,
-+ struct scatterlist *dst,
-+ struct scatterlist *src, unsigned int nbytes)
-+{
-+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_DECRYPT);
-+}
-+
-+static struct crypto_alg cbc_des3_192_alg = {
-+ .cra_name = "cbc(des3_ede)",
-+ .cra_driver_name = "cbc-des3_ede-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
-+ .cra_blocksize = DES3_192_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
-+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
-+ .cra_type = &crypto_blkcipher_type,
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(
-+ cbc_des3_192_alg.cra_list),
-+ .cra_u = {
-+ .blkcipher = {
-+ .min_keysize = DES3_192_KEY_SIZE,
-+ .max_keysize = DES3_192_KEY_SIZE,
-+ .ivsize = DES3_192_BLOCK_SIZE,
-+ .setkey = des3_192_setkey,
-+ .encrypt = cbc_des3_192_encrypt,
-+ .decrypt = cbc_des3_192_decrypt,
-+ }
-+ }
-+};
-+
-+static int init(void)
-+{
-+ int ret = 0;
-+
-+ hw_crypto_init();
-+
-+ ret = crypto_register_alg(&des_alg);
-+ if (ret)
-+ goto des_err;
-+ ret = crypto_register_alg(&ecb_des_alg);
-+ if (ret)
-+ goto ecb_des_err;
-+ ret = crypto_register_alg(&cbc_des_alg);
-+ if (ret)
-+ goto cbc_des_err;
-+
-+ ret = crypto_register_alg(&des3_192_alg);
-+ if (ret)
-+ goto des3_192_err;
-+ ret = crypto_register_alg(&ecb_des3_192_alg);
-+ if (ret)
-+ goto ecb_des3_192_err;
-+ ret = crypto_register_alg(&cbc_des3_192_alg);
-+ if (ret)
-+ goto cbc_des3_192_err;
-+
-+out:
-+ return ret;
-+
-+cbc_des3_192_err:
-+ crypto_unregister_alg(&ecb_des3_192_alg);
-+ecb_des3_192_err:
-+ crypto_unregister_alg(&des3_192_alg);
-+des3_192_err:
-+ crypto_unregister_alg(&cbc_des_alg);
-+cbc_des_err:
-+ crypto_unregister_alg(&ecb_des_alg);
-+ecb_des_err:
-+ crypto_unregister_alg(&des_alg);
-+des_err:
-+ goto out;
-+}
-+
-+static void __exit fini(void)
-+{
-+ crypto_unregister_alg(&cbc_des3_192_alg);
-+ crypto_unregister_alg(&ecb_des3_192_alg);
-+ crypto_unregister_alg(&des3_192_alg);
-+ crypto_unregister_alg(&cbc_des_alg);
-+ crypto_unregister_alg(&ecb_des_alg);
-+ crypto_unregister_alg(&des_alg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_ALIAS("des");
-+MODULE_ALIAS("des3_ede");
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/Makefile linux-2.6.30.10-ubi/arch/ubicom32/crypto/Makefile
---- linux-2.6.30.10/arch/ubicom32/crypto/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+#
-+# arch/ubicom32/crypto/Makefile
-+# <TODO: Replace with short file description>
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+obj-$(CONFIG_CRYPTO_UBICOM32) += crypto_ubicom32.o
-+obj-$(CONFIG_CRYPTO_AES_UBICOM32) += aes_ubicom32.o
-+obj-$(CONFIG_CRYPTO_DES_UBICOM32) += des.o
-+obj-$(CONFIG_CRYPTO_MD5_UBICOM32) += md5.o
-+obj-$(CONFIG_CRYPTO_SHA1_UBICOM32) += sha1.o
-+
-+des-y := des_ubicom32.o des_check_key.o
-+md5-y := md5_ubicom32.o md5_ubicom32_asm.o
-+sha1-y := sha1_ubicom32.o
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/md5_ubicom32_asm.S linux-2.6.30.10-ubi/arch/ubicom32/crypto/md5_ubicom32_asm.S
---- linux-2.6.30.10/arch/ubicom32/crypto/md5_ubicom32_asm.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/md5_ubicom32_asm.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,234 @@
-+/*
-+ * arch/ubicom32/crypto/md5_ubicom32_asm.S
-+ * MD5 (Message Digest 5) support for Ubicom32 v3 architecture
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#define __ASM__
-+#include <asm/ip5000.h>
-+
-+#ifndef RP
-+#define RP A5
+ musb_ep_select(mbase, epnum);
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+@@ -1180,9 +1212,14 @@ void musb_host_tx(struct musb *musb, u8
+ * we have a candidate... NAKing is *NOT* an error
+ */
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS
+ | MUSB_TXCSR_TXPKTRDY);
++#else
++ musb_writew(epio, MUSB_TXCSR,
++ MUSB_TXCSR_TXPKTRDY);
+#endif
-+
-+;*****************************************************************************************
-+; The function prototypes
-+;*****************************************************************************************
-+; void md5_ip5k_init(void)
-+; void md5_ip5k_transform(u32_t *data_input)
-+; void md5_get_digest(u32_t *digest)
-+
-+;*****************************************************************************************
-+; Inputs
-+;*****************************************************************************************;
-+; data_input is the pointer to the block of data over which the digest will be calculated.
-+; It should be word aligned.
-+;
-+; digest is the pointer to the block of data into which the digest (the output) will be written.
-+; It should be word aligned.
-+;
-+
-+;*****************************************************************************************
-+; Outputs
-+;*****************************************************************************************
-+; None
-+
-+;*****************************************************************************************
-+; An: Address Registers
-+;*****************************************************************************************
-+#define an_digest A3
-+#define an_data_input A3
-+#define an_security_block A4
-+
-+;*****************************************************************************************
-+; Hash Constants
-+;*****************************************************************************************
-+#define HASH_MD5_IN0 0x01234567
-+#define HASH_MD5_IN1 0x89abcdef
-+#define HASH_MD5_IN2 0xfedcba98
-+#define HASH_MD5_IN3 0x76543210
-+
-+#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
-+#define HASH_SECURITY_BLOCK_CONTROL_INIT_MD5 ((1 << 4) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
-+
-+;*****************************************************************************************
-+; Hash related defines
-+;*****************************************************************************************
-+#define hash_control 0x00(an_security_block)
-+#define hash_control_low 0x02(an_security_block)
-+#define hash_status 0x04(an_security_block)
-+
-+#define hash_input_0 0x30(an_security_block)
-+#define hash_input_1 0x34(an_security_block)
-+#define hash_input_2 0x38(an_security_block)
-+#define hash_input_3 0x3c(an_security_block)
-+#define hash_input_4 0x40(an_security_block)
-+
-+#define hash_output_0 0x70(an_security_block)
-+#define hash_output_0_low 0x72(an_security_block)
-+#define hash_output_1 0x74(an_security_block)
-+#define hash_output_1_low 0x76(an_security_block)
-+#define hash_output_2 0x78(an_security_block)
-+#define hash_output_2_low 0x7a(an_security_block)
-+#define hash_output_3 0x7c(an_security_block)
-+#define hash_output_3_low 0x7e(an_security_block)
-+
-+;*****************************************************************************************
-+; Assembly macros
-+;*****************************************************************************************
-+ ; C compiler reserves RP (A5) for return address during subroutine call.
-+ ; Use RP to return to caller
-+.macro call_return_macro
-+ calli RP, 0(RP)
-+.endm
-+
-+#if 0
-+;*****************************************************************************************
-+; void md5_ip5k_init(void)
-+; initialize the output registers of the hash module
-+;
-+ ;.section .text.md5_ip5k_init,"ax",@progbits
-+ .section .text
-+ .global _md5_ip5k_init
-+ .func md5_ip5k_init, _md5_ip5k_init
-+
-+_md5_ip5k_init:
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
-+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
-+
-+ movei hash_output_0, #%hi(HASH_MD5_IN0)
-+ movei hash_output_0_low, #%lo(HASH_MD5_IN0)
-+
-+ movei hash_output_1, #%hi(HASH_MD5_IN1)
-+ movei hash_output_1_low, #%lo(HASH_MD5_IN1)
-+
-+ movei hash_output_2, #%hi(HASH_MD5_IN2)
-+ movei hash_output_2_low, #%lo(HASH_MD5_IN2)
-+
-+ movei hash_output_3, #%hi(HASH_MD5_IN3)
-+ movei hash_output_3_low, #%lo(HASH_MD5_IN3)
-+
-+ call_return_macro
-+ .endfunc
+ return;
+ }
+
+@@ -1353,8 +1390,14 @@ void musb_host_tx(struct musb *musb, u8
+ qh->segsize = length;
+
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
++ musb_writew(epio, MUSB_TXCSR,
++ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
++#else
+ musb_writew(epio, MUSB_TXCSR,
+- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
++ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+#endif
+
-+;*****************************************************************************************
-+; void md5_ip5k_init_digest(u32_t *hash_input)
-+; initialize the output registers of the hash module
-+
-+ ;.section .text.md5_ip5k_init_digest,"ax",@progbits
-+ .section .text
-+ .global _md5_ip5k_init_digest
-+ .func md5_ip5k_init_digest, _md5_ip5k_init_digest
-+
-+_md5_ip5k_init_digest:
-+ movea an_data_input, D0
-+
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
-+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
-+
-+ move.4 hash_output_0, (an_data_input)4++
-+ move.4 hash_output_1, (an_data_input)4++
-+ move.4 hash_output_2, (an_data_input)4++
-+ move.4 hash_output_3, (an_data_input)4++
-+
-+ call_return_macro
-+ .endfunc
-+
-+;*****************************************************************************************
-+; void md5_ip5k_transform(u32_t *data_input)
-+; performs intermediate transformation step for the hash calculation
-+;
-+ ;.sect .text.md5_ip5k_transform,"ax",@progbits
-+ .section .text
-+ .global _md5_ip5k_transform
-+ .func md5_ip5k_transform, _md5_ip5k_transform
-+
-+_md5_ip5k_transform:
-+ movea an_data_input, D0
-+
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ ; Write the first 128bits (16 bytes)
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ pipe_flush 0
-+
-+md5_ip5k_transform_wait:
-+ ; wait for the module to calculate the output hash
-+ btst hash_status, #0
-+ jmpne.f md5_ip5k_transform_wait
-+
-+ call_return_macro
-+ .endfunc
-+
-+;*****************************************************************************************
-+; void md5_ip5k_get_digest(u32_t *digest)
-+; Return the hash of the input data
-+;
-+ ;.sect .text.md5_get_digest,"ax",@progbits
-+ .section .text
-+ .global _md5_ip5k_get_digest
-+ .func md5_ip5k_get_digest, _md5_ip5k_get_digest
-+
-+_md5_ip5k_get_digest:
-+ movea an_digest, D0
-+
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ ; we have finished
-+ move.4 0(an_digest), hash_output_0
-+ move.4 4(an_digest), hash_output_1
-+ move.4 8(an_digest), hash_output_2
-+ move.4 12(an_digest), hash_output_3
-+
-+ call_return_macro
-+ .endfunc
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/md5_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/crypto/md5_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/crypto/md5_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/md5_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,200 @@
-+/*
-+ * arch/ubicom32/crypto/md5_ubicom32.c
-+ * Ubicom32 implementation of the MD5 Secure Hash Algorithm
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/crypto.h>
-+
-+#include "crypto_ubicom32.h"
-+
-+#define MD5_DIGEST_SIZE 16
-+#define MD5_BLOCK_SIZE 64
-+#define MD5_HASH_WORDS 4
-+
-+extern void _md5_ip5k_init_digest(u32_t *digest);
-+extern void _md5_ip5k_transform(u32_t *data_input);
-+extern void _md5_ip5k_get_digest(u32_t *digest);
-+
-+struct ubicom32_md5_ctx {
-+ u64 count; /* message length */
-+ u32 state[MD5_HASH_WORDS];
-+ u8 buf[2 * MD5_BLOCK_SIZE];
-+};
-+
-+static void md5_init(struct crypto_tfm *tfm)
-+{
-+ struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
-+ mctx->state[0] = 0x01234567;
-+ mctx->state[1] = 0x89abcdef;
-+ mctx->state[2] = 0xfedcba98;
-+ mctx->state[3] = 0x76543210;
-+
-+ mctx->count = 0;
-+}
-+
-+static inline void _md5_process(u32 *digest, const u8 *data)
-+{
-+ _md5_ip5k_transform((u32 *)data);
-+}
-+
-+static void md5_update(struct crypto_tfm *tfm, const u8 *data,
-+ unsigned int len)
-+{
-+ struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
-+ int index, clen;
-+
-+ /* how much is already in the buffer? */
-+ index = mctx->count & 0x3f;
-+
-+ mctx->count += len;
+ }
+
+
+@@ -1414,7 +1457,11 @@ static void musb_bulk_rx_nak_timeout(str
+
+ /* clear nak timeout bit */
+ rx_csr = musb_readw(epio, MUSB_RXCSR);
++#ifndef CONFIG_UBICOM32
+ rx_csr |= MUSB_RXCSR_H_WZC_BITS;
++#else
++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
++#endif
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+@@ -1483,6 +1530,13 @@ void musb_host_rx(struct musb *musb, u8
+
+ pipe = urb->pipe;
+
++#ifdef CONFIG_UBICOM32
++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
++ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
++ xfer_len, dma ? ", dma" : "");
++#endif
++#endif
+
-+ if (index + len < MD5_BLOCK_SIZE) {
-+ goto store_only;
-+ }
+ DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+ epnum, rx_csr, urb->actual_length,
+ dma ? dma->actual_len : 0);
+@@ -1521,8 +1575,15 @@ void musb_host_rx(struct musb *musb, u8
+ return;
+ }
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
++#else
++ /* NEED TO EVALUATE CHANGE */
++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
++ rx_csr &= ~MUSB_RXCSR_DATAERROR;
++// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
++#endif
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+ goto finish;
+@@ -1579,8 +1640,13 @@ void musb_host_rx(struct musb *musb, u8
+ rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ musb_writew(epio, MUSB_RXCSR,
+ MUSB_RXCSR_H_WZC_BITS | rx_csr);
++#else
++ musb_writew(epio, MUSB_RXCSR,
++ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
++#endif
+ }
+ #endif
+ if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+@@ -1610,7 +1676,7 @@ void musb_host_rx(struct musb *musb, u8
+ else
+ done = false;
+
+- } else {
++ } else {
+ /* done if urb buffer is full or short packet is recd */
+ done = (urb->actual_length + xfer_len >=
+ urb->transfer_buffer_length
+@@ -1823,7 +1889,11 @@ static int musb_schedule(
+ } else if (hw_ep->out_qh != NULL)
+ continue;
+
++#ifndef CONFIG_UBICOM32
+ if (hw_ep == musb->bulk_ep)
++#else
++ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
++#endif
+ continue;
+
+ if (is_in)
+@@ -1836,7 +1906,14 @@ static int musb_schedule(
+ best_end = epnum;
+ }
+ }
+
-+ hw_crypto_lock();
-+ hw_crypto_check();
++#ifdef CONFIG_UBICOM32
++ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
++ best_end = -1;
++#endif
+
-+ /* init digest set ctrl register too */
-+ _md5_ip5k_init_digest(mctx->state);
-+
-+ if (unlikely(index == 0 && SEC_ALIGNED(data))) {
-+fast_process:
-+ while (len >= MD5_BLOCK_SIZE) {
-+ _md5_process(mctx->state, data);
-+ data += MD5_BLOCK_SIZE;
-+ len -= MD5_BLOCK_SIZE;
-+ }
-+ goto store;
-+ }
-+
-+ /* process one stored block */
-+ if (index) {
-+ clen = MD5_BLOCK_SIZE - index;
-+ memcpy(mctx->buf + index, data, clen);
-+ _md5_process(mctx->state, mctx->buf);
-+ data += clen;
-+ len -= clen;
-+ index = 0;
-+ }
-+
-+ if (likely(SEC_ALIGNED(data))) {
-+ goto fast_process;
-+ }
-+
-+ /* process as many blocks as possible */
-+ while (len >= MD5_BLOCK_SIZE) {
-+ memcpy(mctx->buf, data, MD5_BLOCK_SIZE);
-+ _md5_process(mctx->state, mctx->buf);
-+ data += MD5_BLOCK_SIZE;
-+ len -= MD5_BLOCK_SIZE;
-+ }
-+
-+store:
-+ _md5_ip5k_get_digest(mctx->state);
-+ hw_crypto_unlock();
-+
-+store_only:
-+ /* anything left? */
-+ if (len)
-+ memcpy(mctx->buf + index , data, len);
-+}
-+
-+/* Add padding and return the message digest. */
-+static void md5_final(struct crypto_tfm *tfm, u8 *out)
-+{
-+ struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
-+ u32 bits[2];
-+ unsigned int index, end;
-+
-+ /* must perform manual padding */
-+ index = mctx->count & 0x3f;
-+ end = (index < 56) ? MD5_BLOCK_SIZE : (2 * MD5_BLOCK_SIZE);
-+
-+ /* start pad with 1 */
-+ mctx->buf[index] = 0x80;
-+
-+ /* pad with zeros */
-+ index++;
-+ memset(mctx->buf + index, 0x00, end - index - 8);
-+
-+ /* append message length */
-+ bits[0] = mctx->count << 3;
-+ bits[1] = mctx->count >> 29;
-+ __cpu_to_le32s(bits);
-+ __cpu_to_le32s(bits + 1);
-+
-+ memcpy(mctx->buf + end - 8, &bits, sizeof(bits));
-+
-+ /* force to use the mctx->buf and ignore the partial buf */
-+ mctx->count = mctx->count & ~0x3f;
-+ md5_update(tfm, mctx->buf, end);
-+
-+ /* copy digest to out */
-+ memcpy(out, mctx->state, MD5_DIGEST_SIZE);
-+
-+ /* wipe context */
-+ memset(mctx, 0, sizeof *mctx);
-+}
-+
-+static struct crypto_alg alg = {
-+ .cra_name = "md5",
-+ .cra_driver_name= "md5-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_DIGEST,
-+ .cra_blocksize = MD5_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_md5_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(alg.cra_list),
-+ .cra_u = {
-+ .digest = {
-+ .dia_digestsize = MD5_DIGEST_SIZE,
-+ .dia_init = md5_init,
-+ .dia_update = md5_update,
-+ .dia_final = md5_final,
-+ }
-+ }
-+};
-+
-+static int __init init(void)
-+{
-+ hw_crypto_init();
-+ return crypto_register_alg(&alg);
-+}
-+
-+static void __exit fini(void)
-+{
-+ crypto_unregister_alg(&alg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_ALIAS("md5");
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("MD5 Secure Hash Algorithm");
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/sha1_ubicom32_asm.S linux-2.6.30.10-ubi/arch/ubicom32/crypto/sha1_ubicom32_asm.S
---- linux-2.6.30.10/arch/ubicom32/crypto/sha1_ubicom32_asm.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/sha1_ubicom32_asm.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,244 @@
-+/*
-+ * arch/ubicom32/crypto/sha1_ubicom32_asm.S
-+ * SHA1 hash support for Ubicom32 architecture V3.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#define __ASM__
-+#include <asm/ip5000.h>
-+
-+#ifndef RP
-+#define RP A5
-+#endif
-+
-+;*****************************************************************************************
-+; The function prototype
-+;*****************************************************************************************
-+; void sha1_ip5k_init(void)
-+; void sha1_ip5k_transform(u32_t *data_input)
-+; void sha1_ip5k_output(u32_t *digest)
-+
-+;*****************************************************************************************
-+; Inputs
-+;*****************************************************************************************
-+; data_input is the pointer to the block of data over which the digest will be calculated.
-+; It should be word aligned.
-+;
-+; digest is the pointer to the block of data into which the digest (the output) will be written.
-+; It should be word aligned.
-+;
-+
-+;*****************************************************************************************
-+; Outputs
-+;*****************************************************************************************
-+; None
-+
-+;*****************************************************************************************
-+; Hash Constants
-+;*****************************************************************************************
-+#define HASH_SHA1_IN0 0x67452301
-+#define HASH_SHA1_IN1 0xefcdab89
-+#define HASH_SHA1_IN2 0x98badcfe
-+#define HASH_SHA1_IN3 0x10325476
-+#define HASH_SHA1_IN4 0xc3d2e1f0
-+
-+#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
-+#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
-+
-+;*****************************************************************************************
-+; An: Address Registers
-+;*****************************************************************************************
-+#define an_digest a4
-+#define an_data_input a4
-+#define an_security_block a3
-+
-+;*****************************************************************************************
-+; Hash related defines
-+;*****************************************************************************************
-+#define hash_control 0x00(an_security_block)
-+#define hash_control_low 0x02(an_security_block)
-+#define hash_status 0x04(an_security_block)
-+
-+#define hash_input_0 0x30(an_security_block)
-+#define hash_input_1 0x34(an_security_block)
-+#define hash_input_2 0x38(an_security_block)
-+#define hash_input_3 0x3c(an_security_block)
-+#define hash_input_4 0x40(an_security_block)
-+
-+#define hash_output_0 0x70(an_security_block)
-+#define hash_output_0_low 0x72(an_security_block)
-+#define hash_output_1 0x74(an_security_block)
-+#define hash_output_1_low 0x76(an_security_block)
-+#define hash_output_2 0x78(an_security_block)
-+#define hash_output_2_low 0x7a(an_security_block)
-+#define hash_output_3 0x7c(an_security_block)
-+#define hash_output_3_low 0x7e(an_security_block)
-+#define hash_output_4 0x80(an_security_block)
-+#define hash_output_4_low 0x82(an_security_block)
-+
-+;*****************************************************************************************
-+; Assembly macros
-+;*****************************************************************************************
-+ ; C compiler reserves RP (A5) for return address during subroutine call.
-+ ; Use RP to return to caller
-+.macro call_return_macro
-+ calli RP, 0(RP)
-+.endm
-+
-+;*****************************************************************************************
-+; void sha1_ip5k_init(void)
-+; initialize the output registers of the hash module
-+
-+ ;.section .text.sha1_ip5k_init,"ax",@progbits
-+ .section .ocm_text,"ax",@progbits
-+ .global _sha1_ip5k_init
-+ .func sha1_ip5k_init, _sha1_ip5k_init
-+
-+_sha1_ip5k_init:
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
-+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
-+
-+ movei hash_output_0, #%hi(HASH_SHA1_IN0)
-+ movei hash_output_0_low, #%lo(HASH_SHA1_IN0)
-+
-+ movei hash_output_1, #%hi(HASH_SHA1_IN1)
-+ movei hash_output_1_low, #%lo(HASH_SHA1_IN1)
-+
-+ movei hash_output_2, #%hi(HASH_SHA1_IN2)
-+ movei hash_output_2_low, #%lo(HASH_SHA1_IN2)
-+
-+ movei hash_output_3, #%hi(HASH_SHA1_IN3)
-+ movei hash_output_3_low, #%lo(HASH_SHA1_IN3)
-+
-+ movei hash_output_4, #%hi(HASH_SHA1_IN4)
-+ movei hash_output_4_low, #%lo(HASH_SHA1_IN4)
-+
-+ call_return_macro
-+ .endfunc
-+
-+;*****************************************************************************************
-+; void sha1_ip5k_init_digest(u32_t *hash_input)
-+; initialize the output registers of the hash module
-+
-+ ;.section .text.sha1_ip5k_init_digest,"ax",@progbits
-+ .section .ocm_text,"ax",@progbits
-+ .global _sha1_ip5k_init_digest
-+ .func sha1_ip5k_init_digest, _sha1_ip5k_init_digest
-+
-+_sha1_ip5k_init_digest:
-+ movea an_data_input, D0
-+
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
-+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
-+
-+ move.4 hash_output_0, (an_data_input)4++
-+ move.4 hash_output_1, (an_data_input)4++
-+ move.4 hash_output_2, (an_data_input)4++
-+ move.4 hash_output_3, (an_data_input)4++
-+ move.4 hash_output_4, (an_data_input)4++
-+
-+ call_return_macro
-+ .endfunc
-+
-+;*****************************************************************************************
-+; void sha1_ip5k_transform(u32_t *data_input)
-+; performs intermediate transformation step for the hash calculation
-+
-+ ;.section .text.sha1_ip5k_transform,"ax",@progbits
-+ .section .ocm_text,"ax",@progbits
-+ .global _sha1_ip5k_transform
-+ .func sha1_ip5k_transform, _sha1_ip5k_transform
-+
-+_sha1_ip5k_transform:
-+ movea an_data_input, D0
-+
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ ; Write the first 128bits (16 bytes)
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ move.4 hash_input_0, (an_data_input)4++
-+ move.4 hash_input_1, (an_data_input)4++
-+ move.4 hash_input_2, (an_data_input)4++
-+ move.4 hash_input_3, (an_data_input)4++
-+ move.4 hash_input_4, D0
-+
-+ pipe_flush 0
-+
-+sha1_ip5k_transform_wait:
-+ ; wait for the module to calculate the output hash
-+ btst hash_status, #0
-+ jmpne.f sha1_ip5k_transform_wait
-+
-+ call_return_macro
-+ .endfunc
-+
-+;*****************************************************************************************
-+; void sha1_ip5k_output(u32_t *digest)
-+; Return the hash of the input data
-+
-+ ;.section .text.sha1_ip5k_output,"ax",@progbits
-+ .section .ocm_text,"ax",@progbits
-+ .global _sha1_ip5k_output
-+ .func sha1_ip5k_output, _sha1_ip5k_output
-+
-+_sha1_ip5k_output:
-+ movea an_digest, D0
-+
-+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
-+
-+ ; we have finished
-+ move.4 0(an_digest), hash_output_0
-+ move.4 4(an_digest), hash_output_1
-+ move.4 8(an_digest), hash_output_2
-+ move.4 12(an_digest), hash_output_3
-+ move.4 16(an_digest), hash_output_4
-+
-+ call_return_macro
-+ .endfunc
-+
-+;*****************************************************************************************
-+;END ;End of program code
-+;*****************************************************************************************
-diff -ruN linux-2.6.30.10/arch/ubicom32/crypto/sha1_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/crypto/sha1_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/crypto/sha1_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/crypto/sha1_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,354 @@
-+/*
-+ * arch/ubicom32/crypto/sha1_ubicom32.c
-+ * Ubicom32 implementation of the SHA1 Secure Hash Algorithm.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/crypto.h>
-+#include <crypto/sha.h>
-+#include <asm/linkage.h>
-+
-+#include "crypto_ubicom32.h"
-+#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
-+#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
-+
-+struct ubicom32_sha1_ctx {
-+ u64 count; /* message length */
-+ u32 state[5];
-+ u8 buf[2 * SHA1_BLOCK_SIZE];
-+};
-+
-+static inline void sha1_clear_2ws(u8 *buf, int wc)
-+{
-+ asm volatile (
-+ "1: move.4 (%0)4++, #0 \n\t"
-+ " move.4 (%0)4++, #0 \n\t"
-+ " sub.4 %1, #2, %1 \n\t"
-+ " jmple.f 1b \n\t"
-+ :
-+ : "a" (buf), "d" (wc)
-+ : "cc"
-+ );
-+}
-+
-+/* only wipe out count, state, and 1st half of buf - 9 bytes at most */
-+#define sha1_wipe_out(sctx) sha1_clear_2ws((u8 *)sctx, 2 + 5 + 16 - 2)
-+
-+static inline void sha1_init_digest(u32 *digest)
-+{
-+ hw_crypto_set_ctrl(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1);
-+ asm volatile (
-+ " ; move digests to hash_output regs \n\t"
-+ " move.4 0x70(%0), 0x0(%1) \n\t"
-+ " move.4 0x74(%0), 0x4(%1) \n\t"
-+ " move.4 0x78(%0), 0x8(%1) \n\t"
-+ " move.4 0x7c(%0), 0xc(%1) \n\t"
-+ " move.4 0x80(%0), 0x10(%1) \n\t"
-+ :
-+ : "a" (SEC_BASE), "a" (digest)
-+ );
-+}
-+
-+static inline void sha1_transform_feed(const u8 *in)
-+{
-+ asm volatile (
-+ " ; write the 1st 16 bytes \n\t"
-+ " move.4 0x30(%0), 0x0(%1) \n\t"
-+ " move.4 0x34(%0), 0x4(%1) \n\t"
-+ " move.4 0x38(%0), 0x8(%1) \n\t"
-+ " move.4 0x3c(%0), 0xc(%1) \n\t"
-+ " move.4 0x40(%0), %1 \n\t"
-+ " ; write the 2nd 16 bytes \n\t"
-+ " move.4 0x30(%0), 0x10(%1) \n\t"
-+ " move.4 0x34(%0), 0x14(%1) \n\t"
-+ " move.4 0x38(%0), 0x18(%1) \n\t"
-+ " move.4 0x3c(%0), 0x1c(%1) \n\t"
-+ " move.4 0x40(%0), %1 \n\t"
-+ " ; write the 3rd 16 bytes \n\t"
-+ " move.4 0x30(%0), 0x20(%1) \n\t"
-+ " move.4 0x34(%0), 0x24(%1) \n\t"
-+ " move.4 0x38(%0), 0x28(%1) \n\t"
-+ " move.4 0x3c(%0), 0x2c(%1) \n\t"
-+ " move.4 0x40(%0), %1 \n\t"
-+ " ; write the 4th 16 bytes \n\t"
-+ " move.4 0x30(%0), 0x30(%1) \n\t"
-+ " move.4 0x34(%0), 0x34(%1) \n\t"
-+ " move.4 0x38(%0), 0x38(%1) \n\t"
-+ " move.4 0x3c(%0), 0x3c(%1) \n\t"
-+ " move.4 0x40(%0), %1 \n\t"
-+ " pipe_flush 0 \n\t"
-+ :
-+ : "a"(SEC_BASE), "a"(in)
-+ );
-+}
-+
-+static inline void sha1_transform_wait(void)
-+{
-+ asm volatile (
-+ " btst 0x04(%0), #0 \n\t"
-+ " jmpne.f -4 \n\t"
-+ :
-+ : "a"(SEC_BASE)
-+ : "cc"
-+ );
-+}
-+
-+static inline void sha1_output_digest(u32 *digest)
-+{
-+ asm volatile (
-+ " move.4 0x0(%1), 0x70(%0) \n\t"
-+ " move.4 0x4(%1), 0x74(%0) \n\t"
-+ " move.4 0x8(%1), 0x78(%0) \n\t"
-+ " move.4 0xc(%1), 0x7c(%0) \n\t"
-+ " move.4 0x10(%1), 0x80(%0) \n\t"
-+ :
-+ : "a" (SEC_BASE), "a" (digest)
-+ );
-+}
-+
-+static __ocm_text void sha1_init(struct crypto_tfm *tfm)
-+{
-+ struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-+
-+ sctx->state[0] = SHA1_H0;
-+ sctx->state[1] = SHA1_H1;
-+ sctx->state[2] = SHA1_H2;
-+ sctx->state[3] = SHA1_H3;
-+ sctx->state[4] = SHA1_H4;
-+ sctx->count = 0;
-+}
-+
-+static void __ocm_text sha1_update(struct crypto_tfm *tfm, const u8 *data,
-+ unsigned int len)
-+{
-+ struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-+ int index, clen;
-+
-+ /* how much is already in the buffer? */
-+ index = sctx->count & 0x3f;
-+
-+ sctx->count += len;
-+
-+ if (index + len < SHA1_BLOCK_SIZE) {
-+ goto store_only;
-+ }
-+
-+ hw_crypto_lock();
-+ hw_crypto_check();
-+
-+ /* init digest set ctrl register too */
-+ sha1_init_digest(sctx->state);
-+
-+ if (unlikely(index == 0 && SEC_ALIGNED(data))) {
-+fast_process:
-+#if CRYPTO_UBICOM32_LOOP_ASM
-+ if (likely(len >= SHA1_BLOCK_SIZE)) {
-+ register unsigned int cnt = len >> 6; // loop = len / 64;
-+ sha1_transform_feed(data);
-+ data += SHA1_BLOCK_SIZE;
-+
-+ /* cnt is pre-decremented in the loop */
-+ asm volatile (
-+ "; while (--loop): work on 2nd block \n\t"
-+ "1: add.4 %2, #-1, %2 \n\t"
-+ " jmpeq.f 5f \n\t"
-+ " \n\t"
-+ " ; write the 1st 16 bytes \n\t"
-+ " move.4 0x30(%1), (%0)4++ \n\t"
-+ " move.4 0x34(%1), (%0)4++ \n\t"
-+ " move.4 0x38(%1), (%0)4++ \n\t"
-+ " move.4 0x3c(%1), (%0)4++ \n\t"
-+ " ; can not kick off hw before it \n\t"
-+ " ; is done with the prev block \n\t"
-+ " \n\t"
-+ " btst 0x04(%1), #0 \n\t"
-+ " jmpne.f -4 \n\t"
-+ " \n\t"
-+ " ; tell hw to load 1st 16 bytes \n\t"
-+ " move.4 0x40(%1), %2 \n\t"
-+ " \n\t"
-+ " ; write the 2nd 16 bytes \n\t"
-+ " move.4 0x30(%1), (%0)4++ \n\t"
-+ " move.4 0x34(%1), (%0)4++ \n\t"
-+ " move.4 0x38(%1), (%0)4++ \n\t"
-+ " move.4 0x3c(%1), (%0)4++ \n\t"
-+ " move.4 0x40(%1), %2 \n\t"
-+ " \n\t"
-+ " ; write the 3rd 16 bytes \n\t"
-+ " move.4 0x30(%1), (%0)4++ \n\t"
-+ " move.4 0x34(%1), (%0)4++ \n\t"
-+ " move.4 0x38(%1), (%0)4++ \n\t"
-+ " move.4 0x3c(%1), (%0)4++ \n\t"
-+ " move.4 0x40(%1), %2 \n\t"
-+ " \n\t"
-+ " ; write the 4th 16 bytes \n\t"
-+ " move.4 0x30(%1), (%0)4++ \n\t"
-+ " move.4 0x34(%1), (%0)4++ \n\t"
-+ " move.4 0x38(%1), (%0)4++ \n\t"
-+ " move.4 0x3c(%1), (%0)4++ \n\t"
-+ " move.4 0x40(%1), %2 \n\t"
-+ " \n\t"
-+ "; no need flush, enough insts \n\t"
-+ "; before next hw wait \n\t"
-+ " \n\t"
-+ "; go back to loop \n\t"
-+ " jmpt 1b \n\t"
-+ " \n\t"
-+ "; wait hw for last block \n\t"
-+ "5: btst 0x04(%1), #0 \n\t"
-+ " jmpne.f -4 \n\t"
-+ " \n\t"
-+ : "+a" (data)
-+ : "a"( SEC_BASE), "d" (cnt)
-+ : "cc"
-+ );
-+
-+ len = len & (64 - 1);
-+ }
+ /* use bulk reserved ep1 if no other ep is free */
++#ifndef CONFIG_UBICOM32
+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+ hw_ep = musb->bulk_ep;
+ if (is_in)
+@@ -1858,6 +1935,22 @@ static int musb_schedule(
+ } else if (best_end < 0) {
+ return -ENOSPC;
+ }
+#else
-+ while (likely(len >= SHA1_BLOCK_SIZE)) {
-+ sha1_transform_feed(data);
-+ data += SHA1_BLOCK_SIZE;
-+ len -= SHA1_BLOCK_SIZE;
-+ sha1_transform_wait();
-+ }
-+#endif
-+ goto store;
-+ }
-+
-+ /* process one stored block */
-+ if (index) {
-+ clen = SHA1_BLOCK_SIZE - index;
-+ memcpy(sctx->buf + index, data, clen);
-+ sha1_transform_feed(sctx->buf);
-+ data += clen;
-+ len -= clen;
-+ index = 0;
-+ sha1_transform_wait();
-+ }
-+
-+ if (likely(SEC_ALIGNED(data))) {
-+ goto fast_process;
-+ }
-+
-+ /* process as many blocks as possible */
-+ if (likely(len >= SHA1_BLOCK_SIZE)) {
-+ memcpy(sctx->buf, data, SHA1_BLOCK_SIZE);
-+ do {
-+ sha1_transform_feed(sctx->buf);
-+ data += SHA1_BLOCK_SIZE;
-+ len -= SHA1_BLOCK_SIZE;
-+ if (likely(len >= SHA1_BLOCK_SIZE)) {
-+ memcpy(sctx->buf, data, SHA1_BLOCK_SIZE);
-+ sha1_transform_wait();
-+ continue;
-+ }
-+ /* it is the last block */
-+ sha1_transform_wait();
-+ break;
-+ } while (1);
-+ }
-+
-+store:
-+ sha1_output_digest(sctx->state);
-+ hw_crypto_unlock();
-+
-+store_only:
-+ /* anything left? */
-+ if (len)
-+ memcpy(sctx->buf + index , data, len);
-+}
-+
-+/* Add padding and return the message digest. */
-+static void __ocm_text sha1_final(struct crypto_tfm *tfm, u8 *out)
-+{
-+ struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-+ u64 bits;
-+ unsigned int index, end;
-+
-+ /* must perform manual padding */
-+ index = sctx->count & 0x3f;
-+ end = (index < 56) ? SHA1_BLOCK_SIZE : (2 * SHA1_BLOCK_SIZE);
-+
-+ /* start pad with 1 */
-+ sctx->buf[index] = 0x80;
-+
-+ /* pad with zeros */
-+ index++;
-+ memset(sctx->buf + index, 0x00, end - index - 8);
-+
-+ /* append message length */
-+ bits = sctx->count << 3 ;
-+ SEC_COPY_2W(sctx->buf + end - 8, &bits);
-+
-+ /* force to use the sctx->buf and ignore the partial buf */
-+ sctx->count = sctx->count & ~0x3f;
-+ sha1_update(tfm, sctx->buf, end);
-+
-+ /* copy digest to out */
-+ SEC_COPY_5W(out, sctx->state);
-+
-+ /* wipe context */
-+ sha1_wipe_out(sctx);
-+}
-+
-+static struct crypto_alg alg = {
-+ .cra_name = "sha1",
-+ .cra_driver_name= "sha1-ubicom32",
-+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
-+ .cra_flags = CRYPTO_ALG_TYPE_DIGEST,
-+ .cra_blocksize = SHA1_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct ubicom32_sha1_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_list = LIST_HEAD_INIT(alg.cra_list),
-+ .cra_u = {
-+ .digest = {
-+ .dia_digestsize = SHA1_DIGEST_SIZE,
-+ .dia_init = sha1_init,
-+ .dia_update = sha1_update,
-+ .dia_final = sha1_final,
-+ }
-+ }
-+};
-+
-+static int __init init(void)
-+{
-+ hw_crypto_init();
-+ return crypto_register_alg(&alg);
-+}
-+
-+static void __exit fini(void)
-+{
-+ crypto_unregister_alg(&alg);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+MODULE_ALIAS("sha1");
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/a.out.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/a.out.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/a.out.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/a.out.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,47 @@
-+/*
-+ * arch/ubicom32/include/asm/a.out.h
-+ * Definitions for Ubicom32 a.out executable format.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_A_OUT_H
-+#define _ASM_UBICOM32_A_OUT_H
-+
-+struct exec
-+{
-+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
-+ unsigned a_text; /* length of text, in bytes */
-+ unsigned a_data; /* length of data, in bytes */
-+ unsigned a_bss; /* length of uninitialized data area for file, in bytes */
-+ unsigned a_syms; /* length of symbol table data in file, in bytes */
-+ unsigned a_entry; /* start address */
-+ unsigned a_trsize; /* length of relocation info for text, in bytes */
-+ unsigned a_drsize; /* length of relocation info for data, in bytes */
-+};
-+
-+#define N_TRSIZE(a) ((a).a_trsize)
-+#define N_DRSIZE(a) ((a).a_drsize)
-+#define N_SYMSIZE(a) ((a).a_syms)
-+
-+#endif /* _ASM_UBICOM32_A_OUT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/atomic.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/atomic.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/atomic.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/atomic.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,348 @@
-+/*
-+ * arch/ubicom32/include/asm/atomic.h
-+ * Atomic operations definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_ATOMIC_H
-+#define _ASM_UBICOM32_ATOMIC_H
-+
-+#include <asm/system.h>
-+#include <asm/ubicom32-common.h>
-+#include <asm/types.h>
-+
-+/*
-+ * Most instructions on the Ubicom32 processor are atomic in that they
-+ * execute in one clock cycle. However, Linux has several operations
-+ * (e.g. compare and swap) which will require more than a single instruction
-+ * to perform. To achieve this, the Ubicom32 processor uses a single
-+ * global bit in a scratchpad register as a critical section lock. All
-+ * atomic operations acquire this lock.
-+ *
-+ * NOTE: To AVOID DEADLOCK(s), the atomic lock must only be used for atomic
-+ * operations or by the ldsr to avoid disabling a thread performing an atomic
-+ * operation.
-+ *
-+ * Do not attempt to disable interrupts while holding the atomic operations
-+ * lock or you will DEADLOCK the system.
-+ */
-+
-+#define ATOMIC_INIT(i) { (i) }
-+
-+/*
-+ * __atomic_add()
-+ * Add i to v and return the result.
-+ */
-+static inline void __atomic_add(int i, atomic_t *v)
-+{
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ vt->counter += i;
-+ __atomic_lock_release();
-+}
-+
-+/*
-+ * __atomic_sub()
-+ * Subtract i from v and return the result.
-+ */
-+static inline void __atomic_sub(int i, atomic_t *v)
-+{
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ vt->counter -= i;
-+ __atomic_lock_release();
-+}
-+
-+/*
-+ * __atomic_add_return()
-+ * Add i to v and return the result.
-+ *
-+ * The implementation here looks rather odd because we appear to be doing
-+ * the addition twice. In fact that's exactly what we're doing but with
-+ * the ubicom32 instruction set we can do the inner load and add with two
-+ * instructions whereas generating both the atomic result and the "ret"
-+ * result requires three instructions. The second add is generally only as
-+ * costly as a move instruction and in cases where we compare the result
-+ * with a constant the compiler can fold two constant values and do a
-+ * single instruction, thus saving an instruction overall!
-+ *
-+ * At the worst we save one instruction inside the atomic lock.
-+ */
-+static inline int __atomic_add_return(int i, atomic_t *v)
-+{
-+ int ret;
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ ret = vt->counter;
-+ vt->counter = ret + i;
-+ __atomic_lock_release();
-+
-+ return ret + i;
-+}
-+
-+/*
-+ * __atomic_sub_return()
-+ * Subtract i from v and return the result.
-+ *
-+ * The implementation here looks rather odd because we appear to be doing
-+ * the subtraction twice. In fact that's exactly what we're doing but with
-+ * the ubicom32 instruction set we can do the inner load and sub with two
-+ * instructions whereas generating both the atomic result and the "ret"
-+ * result requires three instructions. The second sub is generally only as
-+ * costly as a move instruction and in cases where we compare the result
-+ * with a constant the compiler can fold two constant values and do a
-+ * single instruction, thus saving an instruction overall!
-+ *
-+ * At the worst we save one instruction inside the atomic lock.
-+ */
-+static inline int __atomic_sub_return(int i, atomic_t *v)
-+{
-+ int ret;
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ ret = vt->counter;
-+ vt->counter = ret - i;
-+ __atomic_lock_release();
-+
-+ return ret - i;
-+}
-+
-+/*
-+ * PUBLIC API FOR ATOMIC!
-+ */
-+#define atomic_add(i,v) (__atomic_add( ((int)i),(v)))
-+#define atomic_sub(i,v) (__atomic_sub( ((int)i),(v)))
-+#define atomic_inc(v) (__atomic_add( 1,(v)))
-+#define atomic_dec(v) (__atomic_sub( 1,(v)))
-+#define atomic_add_return(i,v) (__atomic_add_return( ((int)i),(v)))
-+#define atomic_sub_return(i,v) (__atomic_sub_return( ((int)i),(v)))
-+#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
-+#define atomic_dec_return(v) (__atomic_sub_return( 1,(v)))
-+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
-+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-+#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
-+
-+/*
-+ * atomic_read()
-+ * Acquire the atomic lock and read the variable.
-+ */
-+static inline int atomic_read(const atomic_t *v)
-+{
-+ int ret;
-+ const atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ ret = vt->counter;
-+ __atomic_lock_release();
-+
-+ return ret;
-+}
-+
-+/*
-+ * atomic_set()
-+ * Acquire the atomic lock and set the variable.
-+ */
-+static inline void atomic_set(atomic_t *v, int i)
-+{
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ vt->counter = i;
-+ __atomic_lock_release();
-+}
-+
-+/*
-+ * atomic_cmpxchg
-+ * Acquire the atomic lock and exchange if current == old.
-+ */
-+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-+{
-+ int prev;
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ prev = vt->counter;
-+ if (prev == old) {
-+ vt->counter = new;
-+ }
-+ __atomic_lock_release();
-+
-+ return prev;
-+}
-+
-+/*
-+ * atomic_xchg()
-+ * Acquire the atomic lock and exchange values.
-+ */
-+static inline int atomic_xchg(atomic_t *v, int new)
-+{
-+ int prev;
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ prev = vt->counter;
-+ vt->counter = new;
-+ __atomic_lock_release();
-+
-+ return prev;
-+}
-+
-+/*
-+ * atomic_add_unless()
-+ * Acquire the atomic lock and add a unless the value is u.
-+ */
-+static inline int atomic_add_unless(atomic_t *v, int a, int u)
-+{
-+ int prev;
-+ atomic_t *vt = v;
-+
-+ __atomic_lock_acquire();
-+ prev = vt->counter;
-+ if (prev != u) {
-+ vt->counter += a;
-+ __atomic_lock_release();
-+ return 1;
-+ }
-+
-+ __atomic_lock_release();
-+ return 0;
-+}
-+
-+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-+
-+#include <asm-generic/atomic.h>
-+
-+/*
-+ * The following is not a real function. The compiler should remove the function
-+ * call as long as the user does not pass in a size that __xchg and __cmpxchg
-+ * are not prepared for. If the user does pass in an unknown size, the user
-+ * will get a link time error.
-+ *
-+ * The no return is to prevent a compiler error that can occur when dealing with
-+ * uninitialized variables. Given that the function doesn't exist there is no
-+ * net effect (and if it did it would not return).
-+ */
-+extern void __xchg_called_with_bad_pointer(void) __attribute__((noreturn));
-+
-+/*
-+ * __xchg()
-+ * Xchange *ptr for x atomically.
-+ *
-+ * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
-+ * atomic exchange instruction so we use the global atomic_lock.
-+ */
-+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-+{
-+ unsigned long ret;
-+
-+ __atomic_lock_acquire();
-+
-+ switch (size) {
-+ case 1:
-+ ret = *(volatile unsigned char *)ptr;
-+ *(volatile unsigned char *)ptr = x;
-+ break;
-+
-+ case 2:
-+ ret = *(volatile unsigned short *)ptr;
-+ *(volatile unsigned short *)ptr = x;
-+ break;
-+
-+ case 4:
-+ ret = *(volatile unsigned int *)ptr;
-+ *(volatile unsigned int *)ptr = x;
-+ break;
-+
-+ default:
-+ __xchg_called_with_bad_pointer();
-+ break;
-+ }
-+ __atomic_lock_release();
-+ return ret;
-+}
-+
-+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-+
-+/*
-+ * __cmpxchg()
-+ * Compare and Xchange *ptr for x atomically.
-+ *
-+ * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
-+ * atomic exchange instruction so we use the global atomic_lock.
-+ */
-+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long next, int size)
-+{
-+ unsigned long prev;
-+
-+ __atomic_lock_acquire();
-+ switch (size) {
-+ case 1:
-+ prev = *(u8 *)ptr;
-+ if (prev == old) {
-+ *(u8 *)ptr = (u8)next;
-+ }
-+ break;
-+
-+ case 2:
-+ prev = *(u16 *)ptr;
-+ if (prev == old) {
-+ *(u16 *)ptr = (u16)next;
-+ }
-+ break;
-+
-+ case 4:
-+ prev = *(u32 *)ptr;
-+ if (prev == old) {
-+ *(u32 *)ptr = (u32)next;
-+ }
-+ break;
-+
-+ default:
-+ __xchg_called_with_bad_pointer();
-+ break;
-+ }
-+ __atomic_lock_release();
-+ return prev;
-+}
-+
-+/*
-+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
-+ * them available.
-+ */
-+#define cmpxchg_local(ptr, o, n) \
-+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
-+
-+#define cmpxchg(ptr, o, n) __cmpxchg((ptr), (o), (n), sizeof(*(ptr)))
-+
-+#define smp_mb__before_atomic_inc() asm volatile ("" : : : "memory")
-+#define smp_mb__after_atomic_inc() asm volatile ("" : : : "memory")
-+#define smp_mb__before_atomic_dec() asm volatile ("" : : : "memory")
-+#define smp_mb__after_atomic_dec() asm volatile ("" : : : "memory")
-+
-+#endif /* _ASM_UBICOM32_ATOMIC_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/audio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/audio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/audio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/audio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,40 @@
-+/*
-+ * arch/ubicom32/include/asm/audio.h
-+ * Audio include file
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _AUDIO_H
-+#define _AUDIO_H
-+
-+#include <asm/devtree.h>
-+#include <asm/audionode.h>
-+
-+/*
-+ * Resource indices used to access IRQs via platform_get_resource
-+ */
-+#define AUDIO_MEM_RESOURCE 0
-+#define AUDIO_TX_IRQ_RESOURCE 0
-+#define AUDIO_RX_IRQ_RESOURCE 1
-+
-+extern struct platform_device * __init audio_device_alloc(const char *driver_name, const char *node_name, const char *inst_name, int priv_size);
-+
-+#define audio_device_priv(pdev) (((struct ubi32pcm_platform_data *)(((struct platform_device *)(pdev))->dev.platform_data))->priv_data)
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/audionode.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/audionode.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/audionode.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/audionode.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,152 @@
-+/*
-+ * audionode.h
-+ * audionode and DMA descriptors
-+ *
-+ * Copyright \81© 2009 Ubicom Inc. <www.ubicom.com>. All rights reserved.
-+ *
-+ * This file contains confidential information of Ubicom, Inc. and your use of
-+ * this file is subject to the Ubicom Software License Agreement distributed with
-+ * this file. If you are uncertain whether you are an authorized user or to report
-+ * any unauthorized use, please contact Ubicom, Inc. at +1-408-789-2200.
-+ * Unauthorized reproduction or distribution of this file is subject to civil and
-+ * criminal penalties.
-+ *
-+ */
-+#ifndef _AUDIONODE_H_
-+#define _AUDIONODE_H_
-+
-+#define AUDIO_INT_FLAG_MORE_SAMPLES 0x00000001
-+#define AUDIO_INT_FLAG_COMMAND 0x00000002
-+
-+/*
-+ * Commands the Primary OS sends to the audio device
-+ */
-+enum audio_command {
-+ AUDIO_CMD_NONE,
-+ AUDIO_CMD_START,
-+ AUDIO_CMD_STOP,
-+ AUDIO_CMD_PAUSE,
-+ AUDIO_CMD_RESUME,
-+ AUDIO_CMD_MUTE,
-+ AUDIO_CMD_UNMUTE,
-+ AUDIO_CMD_SETUP,
-+ AUDIO_CMD_ENABLE,
-+ AUDIO_CMD_DISABLE,
-+};
-+
-+/*
-+ * Flag bits passed in the registers
-+ */
-+#define CMD_START_FLAG_LE (1 << 0) /* Use Little Endian Mode */
-+
-+/*
-+ * Status bits that audio device can set to indicate reason
-+ * for interrupting the Primary OS
-+ */
-+#define AUDIO_STATUS_PLAY_DMA0_REQUEST (1 << 0) /* Audio device needs samples in DMA0 for playback */
-+#define AUDIO_STATUS_PLAY_DMA1_REQUEST (1 << 1) /* Audio device needs samples in DMA1 for playback */
-+
-+struct audio_dma {
-+ /*
-+ * NOTE: The active flag shall only be SET by the producer and CLEARED
-+ * by the consumer, NEVER the other way around. For playback, the
-+ * Primary OS sets this flag and ipAudio clears it.
-+ *
-+ * The producer shall not modify the ptr or ctr fields when the transfer
-+ * is marked as active, as these are used by the consumer to do the
-+ * transfer.
-+ */
-+ volatile u32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */
-+ volatile void *ptr; /* Pointer to data to be transferred */
-+ volatile u32_t ctr; /* Counter: number of data units to transfer */
-+};
-+
-+#define AUDIONODE_CAP_BE (1 << 0)
-+#define AUDIONODE_CAP_LE (1 << 1)
-+
-+#define AUDIONODE_VERSION 7
-+struct audio_node {
-+ struct devtree_node dn;
-+
-+ /*
-+ * Version of this node
-+ */
-+ u32_t version;
-+
-+ /*
-+ * Pointer to the registers
-+ */
-+ struct audio_regs *regs;
-+};
-+
-+/*
-+ * [OCM] Audio registers
-+ * Registers exposed as part of our MMIO area
-+ */
-+#define AUDIO_REGS_VERSION 7
-+struct audio_regs {
-+ /*
-+ * Version of this register set
-+ */
-+ u32_t version;
-+
-+ /*
-+ * Interrupt status
-+ */
-+ volatile u32_t int_status;
-+
-+ /*
-+ * Interrupt request
-+ */
-+ volatile u32_t int_req;
-+
-+ /*
-+ * Current IRQ being serviced
-+ */
-+ u32_t cur_irq;
-+
-+ /*
-+ * Maximum number of devices supported
-+ */
-+ u32_t max_devs;
-+
-+ /*
-+ * [DDR] Device registers for each of the devices
-+ */
-+ struct audio_dev_regs *adr;
-+};
-+
-+#define AUDIO_DEV_REGS_VERSION 2
-+struct audio_dev_regs {
-+ u32_t version; /* Version of this register set */
-+
-+ u8_t name[32]; /* Name of this driver */
-+ u32_t caps; /* Capabilities of this driver */
-+ const u32_t *sample_rates; /* Sample Rates supported by this driver */
-+ u32_t n_sample_rates; /* Number of sample rates supported by this driver */
-+ u32_t channel_mask; /* A bit set in a particular position means we support this channel configuration */
-+ volatile u32_t int_flags; /* Reason for interrupting audio device */
-+ volatile enum audio_command command; /* Command from Primary OS */
-+ volatile u32_t flags; /* Flag bits for this command */
-+ volatile u32_t channels; /* Number of channels */
-+ volatile u32_t sample_rate; /* Sample rate */
-+ volatile u32_t status; /* Status bits sent from ipAudio to Primary OS */
-+ void *primary_os_buffer_ptr; /*
-+ * Playback: Pointer to next sample to be removed from
-+ * Primary OS sample buffer
-+ * Capture: Pointer to where next sample will be inserted
-+ * into Primary OS sample buffer
-+ */
-+
-+ /*
-+ * These are the transfer requests. They are used in alternating
-+ * order so that when ipAudio is processing one request, the
-+ * Primary OS can fill in the other one.
-+ *
-+ * NOTE: The active bit shall always be SET by the producer and
-+ * CLEARED by the consumer, NEVER the other way around.
-+ */
-+ struct audio_dma dma_xfer_requests[2];
-+};
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/auxvec.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/auxvec.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/auxvec.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/auxvec.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,32 @@
-+/*
-+ * arch/ubicom32/include/asm/auxvec.h
-+ * Symbolic values for the entries in the auxiliary table
-+ * put on the initial stack.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_AUXVEC_H
-+#define _ASM_UBICOM32_AUXVEC_H
-+
-+#endif /* _ASM_UBICOM32_AUXVEC_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/bitops.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bitops.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/bitops.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bitops.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,172 @@
-+/*
-+ * arch/ubicom32/include/asm/bitops.h
-+ * Bit manipulation definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_BITOPS_H
-+#define _ASM_UBICOM32_BITOPS_H
-+
-+/*
-+ * Copyright 1992, Linus Torvalds.
-+ */
-+
-+#include <linux/compiler.h>
-+#include <asm/byteorder.h> /* swab32 */
-+
-+#ifdef __KERNEL__
-+
-+#ifndef _LINUX_BITOPS_H
-+#error only <linux/bitops.h> can be included directly
-+#endif
-+
-+#include <asm-generic/bitops/ffs.h>
-+#include <asm-generic/bitops/__ffs.h>
-+
-+#include <asm-generic/bitops/sched.h>
-+#include <asm-generic/bitops/ffz.h>
-+
-+#include <asm/ubicom32-common.h>
-+
-+static inline void set_bit(int bit, volatile unsigned long *p)
-+{
-+ unsigned long mask = 1UL << (bit & 31);
-+
-+ p += bit >> 5;
-+
-+ __atomic_lock_acquire();
-+ *p |= mask;
-+ __atomic_lock_release();
-+}
-+
-+static inline void clear_bit(int bit, volatile unsigned long *p)
-+{
-+ unsigned long mask = 1UL << (bit & 31);
-+
-+ p += bit >> 5;
-+
-+ __atomic_lock_acquire();
-+ *p &= ~mask;
-+ __atomic_lock_release();
-+}
-+
-+/*
-+ * clear_bit() doesn't provide any barrier for the compiler.
-+ */
-+#define smp_mb__before_clear_bit() barrier()
-+#define smp_mb__after_clear_bit() barrier()
-+
-+static inline void change_bit(int bit, volatile unsigned long *p)
-+{
-+ unsigned long mask = 1UL << (bit & 31);
-+
-+ p += bit >> 5;
-+
-+ __atomic_lock_acquire();
-+ *p ^= mask;
-+ __atomic_lock_release();
-+}
-+
-+static inline int test_and_set_bit(int bit, volatile unsigned long *p)
-+{
-+ unsigned int res;
-+ unsigned long mask = 1UL << (bit & 31);
-+
-+ p += bit >> 5;
-+
-+ __atomic_lock_acquire();
-+ res = *p;
-+ *p = res | mask;
-+ __atomic_lock_release();
-+
-+ return res & mask;
-+}
-+
-+static inline int test_and_clear_bit(int bit, volatile unsigned long *p)
-+{
-+ unsigned int res;
-+ unsigned long mask = 1UL << (bit & 31);
-+
-+ p += bit >> 5;
-+
-+ __atomic_lock_acquire();
-+ res = *p;
-+ *p = res & ~mask;
-+ __atomic_lock_release();
-+
-+ return res & mask;
-+}
-+
-+static inline int test_and_change_bit(int bit, volatile unsigned long *p)
-+{
-+ unsigned int res;
-+ unsigned long mask = 1UL << (bit & 31);
-+
-+ p += bit >> 5;
-+
-+ __atomic_lock_acquire();
-+ res = *p;
-+ *p = res ^ mask;
-+ __atomic_lock_release();
-+
-+ return res & mask;
-+}
-+
-+#include <asm-generic/bitops/non-atomic.h>
-+
-+/*
-+ * This routine doesn't need to be atomic.
-+ */
-+static inline int __constant_test_bit(int nr, const volatile unsigned long *addr)
-+{
-+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-+}
-+
-+static inline int __test_bit(int nr, const volatile unsigned long *addr)
-+{
-+ int * a = (int *) addr;
-+ int mask;
-+
-+ a += nr >> 5;
-+ mask = 1 << (nr & 0x1f);
-+ return ((mask & *a) != 0);
-+}
-+
-+#define test_bit(nr,addr) (__builtin_constant_p(nr) ? __constant_test_bit((nr),(addr)) : __test_bit((nr),(addr)))
-+
-+#include <asm-generic/bitops/find.h>
-+#include <asm-generic/bitops/hweight.h>
-+#include <asm-generic/bitops/lock.h>
-+
-+#include <asm-generic/bitops/ext2-non-atomic.h>
-+#include <asm-generic/bitops/ext2-atomic.h>
-+#include <asm-generic/bitops/minix.h>
-+
-+#endif /* __KERNEL__ */
-+
-+#include <asm-generic/bitops/fls.h>
-+#include <asm-generic/bitops/__fls.h>
-+#include <asm-generic/bitops/fls64.h>
-+
-+#endif /* _ASM_UBICOM32_BITOPS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/board.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/board.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/board.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/board.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/include/asm/board.h
-+ * Board init and revision definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_BOARD_H
-+#define _ASM_UBICOM32_BOARD_H
-+
-+extern const char *board_get_revision(void);
-+extern void __init board_init(void);
-+
-+#endif /* _ASM_UBICOM32_BOARD_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/bootargs.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bootargs.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/bootargs.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bootargs.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/include/asm/bootargs.h
-+ * Kernel command line via the devtree API.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_BOOTARGS_H
-+#define _ASM_UBICOM32_BOOTARGS_H
-+
-+extern const char *bootargs_get_cmdline(void);
-+extern void __init bootargs_init(void);
-+
-+#endif /* _ASM_UBICOM32_BOOTARGS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/bootinfo.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bootinfo.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/bootinfo.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bootinfo.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/include/asm/bootinfo.h
-+ * Definitions of firmware boot parameters passed to the kernel.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_BOOTINFO_H
-+#define _ASM_UBICOM32_BOOTINFO_H
-+
-+/* Nothing for ubicom32 */
-+
-+#endif /* _ASM_UBICOM32_BOOTINFO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/bug.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bug.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/bug.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bug.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,95 @@
-+/*
-+ * arch/ubicom32/include/asm/bug.h
-+ * Generic bug.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_BUG_H
-+#define _ASM_UBICOM32_BUG_H
-+
-+#include <linux/kernel.h>
-+#include <asm/thread.h>
-+
-+#if defined(CONFIG_BUG) && defined(CONFIG_STOP_ON_BUG)
-+
-+/*
-+ * BUG()
-+ * Ubicom specific version of the BUG() macro.
-+ *
-+ * This implementation performs a THREAD_STALL stopping all threads before
-+ * calling panic. This enables a developer to see the "real" state of the
-+ * machine (since panic alters the system state). We do the printf first
-+ * because while it is slow, it does not alter system state (like
-+ * interrupts).
-+ *
-+ * TODO: Implement the trap sequence used by other architectures.
-+ */
-+#define BUG() do { \
-+ printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-+ THREAD_STALL; \
-+ panic("BUG!"); \
-+} while (0)
-+
-+
-+/*
-+ * __WARN()
-+ * WARN() using printk() for now.
-+ *
-+ * TODO: Implement the trap sequence used by other architectures.
-+ */
-+#define __WARN() \
-+ do { \
-+ printk("WARN: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-+ } while(0)
-+
-+/*
-+ * WARN_ON()
-+ * Ubicom specific version of the WARN_ON macro.
-+ *
-+ * This implementation performs a printk for the WARN_ON() instead
-+ * of faulting into the kernel and using report_bug().
-+ *
-+ * TODO: Implement the trap sequence used by other architectures.
-+ */
-+#define WARN_ON(x) ({ \
-+ int __ret_warn_on = !!(x); \
-+ if (__builtin_constant_p(__ret_warn_on)) { \
-+ if (__ret_warn_on) \
-+ __WARN(); \
-+ } else { \
-+ if (unlikely(__ret_warn_on)) \
-+ __WARN(); \
-+ } \
-+ unlikely(__ret_warn_on); \
-+})
-+
-+
-+#define HAVE_ARCH_BUG
-+#define HAVE_ARCH_WARN_ON
-+
-+#endif
-+
-+#include <asm-generic/bug.h>
-+
-+#endif /* _ASM_UBICOM32_BUG_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/bugs.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bugs.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/bugs.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/bugs.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,44 @@
-+/*
-+ * arch/ubicom32/include/asm/bugs.h
-+ * Definition of check_bugs() for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1994 Linus Torvalds
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+/*
-+ * This is included by init/main.c to check for architecture-dependent bugs.
-+ *
-+ * Needs:
-+ * void check_bugs(void);
-+ */
-+
-+#ifndef _ASM_UBICOM32_BUGS_H
-+#define _ASM_UBICOM32_BUGS_H
-+
-+static void check_bugs(void)
-+{
-+}
-+
-+#endif /* _ASM_UBICOM32_BUGS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/byteorder.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/byteorder.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/byteorder.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/byteorder.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/byteorder.h
-+ * Byte order swapping utility routines.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_BYTEORDER_H
-+#define _ASM_UBICOM32_BYTEORDER_H
-+
-+#include <linux/byteorder/big_endian.h>
-+
-+#endif /* _ASM_UBICOM32_BYTEORDER_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/cachectl.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cachectl.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/cachectl.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cachectl.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,39 @@
-+/*
-+ * arch/ubicom32/include/asm/cachectl.h
-+ * Ubicom32 cache control definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CACHECTL_H
-+#define _ASM_UBICOM32_CACHECTL_H
-+
-+#include <asm/ip5000.h>
-+
-+/*
-+ * mem_cache_control()
-+ * Special cache control operation
-+ */
-+extern void mem_cache_control(unsigned long cc, unsigned long begin_addr, unsigned long end_addr, unsigned long op);
-+
-+#endif /* _ASM_UBICOM32_CACHECTL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/cacheflush.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cacheflush.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/cacheflush.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cacheflush.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,111 @@
-+/*
-+ * arch/ubicom32/include/asm/cacheflush.h
-+ * Cache flushing definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CACHEFLUSH_H
-+#define _ASM_UBICOM32_CACHEFLUSH_H
-+
-+/*
-+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
-+ */
-+#include <linux/mm.h>
-+#include <asm/cachectl.h>
-+#include <asm/ip5000.h>
-+
-+#define flush_cache_all() __flush_cache_all()
-+#define flush_cache_mm(mm) do { } while (0)
-+#define flush_cache_dup_mm(mm) do { } while (0)
-+#define flush_cache_range(vma, start, end) __flush_cache_all()
-+#define flush_cache_page(vma, vmaddr) do { } while (0)
-+#define flush_dcache_page(page) do { } while (0)
-+#define flush_dcache_mmap_lock(mapping) do { } while (0)
-+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-+
-+#define flush_dcache_range(start, end) \
-+do { \
-+ /* Flush the data cache and invalidate the I cache. */ \
-+ mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
-+ mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
-+} while (0)
-+
-+#define flush_icache_range(start, end) \
-+do { \
-+ /* Flush the data cache and invalidate the I cache. */ \
-+ mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
-+ mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
-+} while (0)
-+
-+#define flush_icache_page(vma,pg) do { } while (0)
-+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-+#define flush_cache_vmap(start, end) do { } while (0)
-+#define flush_cache_vunmap(start, end) do { } while (0)
-+
-+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-+ memcpy(dst, src, len)
-+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-+ memcpy(dst, src, len)
-+
-+/*
-+ * Cache handling for IP5000
-+ */
-+extern inline void mem_cache_invalidate_all(unsigned long cc)
-+{
-+ if (cc == DCCR_BASE)
-+ UBICOM32_LOCK(DCCR_LOCK_BIT);
-+ else
-+ UBICOM32_LOCK(ICCR_LOCK_BIT);
-+
-+ asm volatile (
-+ " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
-+ " nop \n\t"
-+ " bclr "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
-+ " pipe_flush 0 \n\t"
-+ :
-+ : "a"(cc)
-+ : "cc"
-+ );
-+
-+ if (cc == DCCR_BASE)
-+ UBICOM32_UNLOCK(DCCR_LOCK_BIT);
-+ else
-+ UBICOM32_UNLOCK(ICCR_LOCK_BIT);
-+
-+}
-+
-+static inline void __flush_cache_all(void)
-+{
-+ /*
-+ * Flush Icache
-+ */
-+ mem_cache_invalidate_all(ICCR_BASE);
-+
-+ /*
-+ * Flush Dcache
-+ */
-+ mem_cache_invalidate_all(DCCR_BASE);
-+}
-+
-+#endif /* _ASM_UBICOM32_CACHEFLUSH_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/cache.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cache.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/cache.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cache.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,40 @@
-+/*
-+ * arch/ubicom32/include/asm/cache.h
-+ * Cache line definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CACHE_H
-+#define _ASM_UBICOM32_CACHE_H
-+
-+/*
-+ * bytes per L1 cache line
-+ */
-+#define L1_CACHE_SHIFT 5
-+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-+
-+#define __cacheline_aligned
-+#define ____cacheline_aligned
-+
-+#endif /* _ASM_UBICOM32_CACHE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/checksum.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/checksum.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/checksum.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/checksum.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,149 @@
-+/*
-+ * arch/ubicom32/include/asm/checksum.h
-+ * Checksum utilities for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CHECKSUM_H
-+#define _ASM_UBICOM32_CHECKSUM_H
-+
-+#include <linux/in6.h>
-+
-+/*
-+ * computes the checksum of a memory block at buff, length len,
-+ * and adds in "sum" (32-bit)
-+ *
-+ * returns a 32-bit number suitable for feeding into itself
-+ * or csum_tcpudp_magic
-+ *
-+ * this function must be called with even lengths, except
-+ * for the last fragment, which may be odd
-+ *
-+ * it's best to have buff aligned on a 32-bit boundary
-+ */
-+__wsum csum_partial(const void *buff, int len, __wsum sum);
-+
-+/*
-+ * the same as csum_partial, but copies from src while it
-+ * checksums
-+ *
-+ * here even more important to align src and dst on a 32-bit (or even
-+ * better 64-bit) boundary
-+ */
-+
-+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-+ int len, __wsum sum);
-+
-+
-+/*
-+ * the same as csum_partial_copy, but copies from user space.
-+ *
-+ * here even more important to align src and dst on a 32-bit (or even
-+ * better 64-bit) boundary
-+ */
-+
-+extern __wsum csum_partial_copy_from_user(const void __user *src,
-+ void *dst, int len, __wsum sum, int *csum_err);
-+
-+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-+
-+/*
-+ * Fold a partial checksum
-+ */
-+
-+static inline __sum16 csum_fold(__wsum sum)
-+{
-+ asm volatile (
-+ " lsr.4 d15, %0, #16 \n\t"
-+ " bfextu %0, %0, #16 \n\t"
-+ " add.4 %0, d15, %0 \n\t"
-+ " lsr.4 d15, %0, #16 \n\t"
-+ " bfextu %0, %0, #16 \n\t"
-+ " add.4 %0, d15, %0 \n\t"
-+ : "=&d" (sum)
-+ : "0"(sum)
-+ : "d15"
-+ );
-+ return (__force __sum16)~sum;
-+}
-+
-+
-+/*
-+ * computes the checksum of the TCP/UDP pseudo-header
-+ * returns a 16-bit checksum, already complemented
-+ */
-+
-+static inline __wsum
-+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-+ unsigned short proto, __wsum sum)
-+{
-+ asm volatile (
-+ " add.4 %0, %2, %0 \n\t"
-+ " addc %0, %3, %0 \n\t"
-+ " addc %0, %4, %0 \n\t"
-+ " addc %0, %5, %0 \n\t"
-+ " addc %0, #0, %0 \n\t"
-+ : "=&d" (sum)
-+ : "0"(sum), "r" (saddr), "r" (daddr), "r" (len), "r"(proto)
-+ );
-+ return sum;
-+}
-+
-+static inline __sum16
-+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-+ unsigned short proto, __wsum sum)
-+{
-+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-+}
-+
-+/*
-+ * this routine is used for miscellaneous IP-like checksums, mainly
-+ * in icmp.c
-+ */
-+extern __sum16 ip_compute_csum(const void *buff, int len);
-+
-+#define _HAVE_ARCH_IPV6_CSUM
-+
-+static __inline__ __sum16
-+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-+ __u32 len, unsigned short proto, __wsum sum)
-+{
-+ asm volatile (
-+ " add.4 %0, 0(%2), %0 \n\t"
-+ " addc %0, 4(%2), %0 \n\t"
-+ " addc %0, 8(%2), %0 \n\t"
-+ " addc %0, 12(%2), %0 \n\t"
-+ " addc %0, 0(%3), %0 \n\t"
-+ " addc %0, 4(%3), %0 \n\t"
-+ " addc %0, 8(%3), %0 \n\t"
-+ " addc %0, 12(%3), %0 \n\t"
-+ " addc %0, %4, %0 \n\t"
-+ " addc %0, #0, %0 \n\t"
-+ : "=&d" (sum)
-+ : "0" (sum), "a" (saddr), "a" (daddr), "d" (len + proto)
-+ );
-+ return csum_fold(sum);
-+}
-+
-+#endif /* _ASM_UBICOM32_CHECKSUM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/cpu.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cpu.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/cpu.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cpu.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,45 @@
-+/*
-+ * arch/ubicom32/include/asm/cpu.h
-+ * CPU definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2004-2005 ARM Ltd.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CPU_H
-+#define _ASM_UBICOM32_CPU_H
-+
-+#include <linux/percpu.h>
-+
-+struct cpuinfo_ubicom32 {
-+ unsigned long tid; /* Hardware thread number */
-+
-+#ifdef CONFIG_SMP
-+ volatile unsigned long ipi_pending; /* Bit map of operations to execute */
-+ unsigned long ipi_count; /* Number of IPI(s) taken on this cpu */
-+#endif
-+};
-+
-+DECLARE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
-+
-+#endif /* _ASM_UBICOM32_CPU_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/cputime.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cputime.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/cputime.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/cputime.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/cputime.h
-+ * Generic cputime.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CPUTIME_H
-+#define _ASM_UBICOM32_CPUTIME_H
-+
-+#include <asm-generic/cputime.h>
-+
-+#endif /* _ASM_UBICOM32_CPUTIME_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/current.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/current.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/current.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/current.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,44 @@
-+/*
-+ * arch/ubicom32/include/asm/current.h
-+ * Definition of get_current() for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
-+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_CURRENT_H
-+#define _ASM_UBICOM32_CURRENT_H
-+
-+#include <linux/thread_info.h>
-+
-+struct task_struct;
-+
-+static inline struct task_struct *get_current(void)
-+{
-+ return(current_thread_info()->task);
-+}
-+
-+#define current get_current()
-+
-+#endif /* _ASM_UBICOM32_CURRENT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/delay.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/delay.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/delay.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/delay.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,75 @@
-+/*
-+ * arch/ubicom32/include/asm/delay.h
-+ * Definition of delay routines for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_DELAY_H
-+#define _ASM_UBICOM32_DELAY_H
-+
-+#include <asm/param.h>
-+#include <asm/ip5000.h>
-+
-+static inline void __delay(unsigned long loops)
-+{
-+ if (loops == 0) {
-+ return;
-+ }
-+
-+ asm volatile (
-+ "1: add.4 %0, #-1, %0 \n\t"
-+ " jmpne.t 1b \n\t"
-+ : "+d" (loops)
-+ );
-+}
-+
-+/*
-+ * Ubicom32 processor uses fixed 12MHz external OSC.
-+ * So we use that as reference to count 12 cycles/us
-+ */
-+
-+extern unsigned long loops_per_jiffy;
-+
-+static inline void _udelay(unsigned long usecs)
-+{
-+#if defined(CONFIG_UBICOM32_V4) || defined(CONFIG_UBICOM32_V3)
-+ asm volatile (
-+ " add.4 d15, 0(%0), %1 \n\t"
-+ " sub.4 #0, 0(%0), d15 \n\t"
-+ " jmpmi.w.f .-4 \n\t"
-+ :
-+ : "a"(TIMER_BASE + TIMER_MPTVAL), "d"(usecs * (12000000/1000000))
-+ : "d15"
-+ );
-+#else
-+ BUG();
-+#endif
-+}
-+
-+/*
-+ * Moved the udelay() function into library code, no longer inlined.
-+ */
-+extern void udelay(unsigned long usecs);
-+
-+#endif /* _ASM_UBICOM32_DELAY_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/device.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/device.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/device.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/device.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,35 @@
-+/*
-+ * arch/ubicom32/include/asm/device.h
-+ * Generic device.h for Ubicom32 architecture.
-+ *
-+ * Used for arch specific extensions to struct device
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_DEVICE_H
-+#define _ASM_UBICOM32_DEVICE_H
-+
-+#include <asm-generic/device.h>
-+
-+#endif /* _ASM_UBICOM32_DEVICE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/devtree.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/devtree.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/devtree.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/devtree.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,52 @@
-+/*
-+ * arch/ubicom32/include/asm/devtree.h
-+ * Device Tree Header File (Shared between ultra and the Host OS)
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_DEVTREE_H
-+#define _ASM_UBICOM32_DEVTREE_H
-+
-+#define DEVTREE_MAX_NAME 32
-+#define DEVTREE_IRQ_NONE 0xff
-+#define DEVTREE_IRQ_DONTCARE 0xff
-+#define DEVTREE_NODE_MAGIC 0x10203040
-+
-+struct devtree_node {
-+ struct devtree_node *next;
-+ unsigned char sendirq;
-+ unsigned char recvirq;
-+ char name[DEVTREE_MAX_NAME];
-+ unsigned int magic;
-+};
-+
-+extern struct devtree_node *devtree;
-+extern struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq);
-+extern struct devtree_node *devtree_find_node(const char *str);
-+extern struct devtree_node *devtree_find_next(struct devtree_node **cur);
-+extern int devtree_irq(struct devtree_node *dn, unsigned char *sendirq, unsigned char *recvirq);
-+extern void devtree_print(void);
-+
-+#endif /* _ASM_UBICOM32_DEVTREE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/div64.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/div64.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/div64.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/div64.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/div64.h
-+ * Generic div64.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_DIV64_H
-+#define _ASM_UBICOM32_DIV64_H
-+
-+#include <asm-generic/div64.h>
-+
-+#endif /* _ASM_UBICOM32_DIV64_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/dma.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/dma.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/dma.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/dma.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/include/asm/dma.h
-+ * DMA definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_DMA_H
-+#define _ASM_UBICOM32_DMA_H
-+
-+/* Nothing so far */
-+#define MAX_DMA_ADDRESS 0x00 /* This is quite suspicious */
-+
-+#endif /* _ASM_UBICOM32_DMA_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/dma-mapping.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/dma-mapping.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/dma-mapping.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/dma-mapping.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,328 @@
-+/*
-+ * arch/ubicom32/include/asm/dma-mapping.h
-+ * Generic dma-mapping.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_DMA_MAPPING_H
-+#define _ASM_UBICOM32_DMA_MAPPING_H
-+
-+#include <linux/scatterlist.h>
-+#ifdef CONFIG_PCI
-+
-+/* we implement the API below in terms of the existing PCI one,
-+ * so include it */
-+#include <linux/pci.h>
-+/* need struct page definitions */
-+#include <linux/mm.h>
-+
-+static inline int
-+dma_supported(struct device *dev, u64 mask)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ return pci_dma_supported(to_pci_dev(dev), mask);
-+}
-+
-+static inline int
-+dma_set_mask(struct device *dev, u64 dma_mask)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-+}
-+
-+static inline void *
-+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-+ gfp_t flag)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
-+}
-+
-+static inline void
-+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
-+ dma_addr_t dma_handle)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
-+}
-+
-+static inline dma_addr_t
-+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
-+}
-+
-+static inline void
-+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
-+}
-+
-+static inline dma_addr_t
-+dma_map_page(struct device *dev, struct page *page,
-+ unsigned long offset, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
-+}
-+
-+static inline void
-+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
-+}
-+
-+static inline int
-+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
-+}
-+
-+static inline void
-+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
-+}
-+
-+static inline void
-+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
-+ size, (int)direction);
-+}
-+
-+static inline void
-+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
-+ size, (int)direction);
-+}
-+
-+static inline void
-+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
-+}
-+
-+static inline void
-+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-+ enum dma_data_direction direction)
-+{
-+ BUG_ON(dev->bus != &pci_bus_type);
-+
-+ pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
-+}
-+
-+static inline int
-+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-+{
-+ return pci_dma_mapping_error(to_pci_dev(dev), dma_addr);
-+}
-+
-+
-+#else
-+
-+static inline int
-+dma_supported(struct device *dev, u64 mask)
-+{
-+ return 0;
-+}
-+
-+static inline int
-+dma_set_mask(struct device *dev, u64 dma_mask)
-+{
-+ BUG();
-+ return 0;
-+}
-+
-+static inline void *
-+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-+ gfp_t flag)
-+{
-+ BUG();
-+ return NULL;
-+}
-+
-+static inline void
-+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
-+ dma_addr_t dma_handle)
-+{
-+ BUG();
-+}
-+
-+static inline dma_addr_t
-+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+ return 0;
-+}
-+
-+static inline void
-+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline dma_addr_t
-+dma_map_page(struct device *dev, struct page *page,
-+ unsigned long offset, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+ return 0;
-+}
-+
-+static inline void
-+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline int
-+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+ return 0;
-+}
-+
-+static inline void
-+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline void
-+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline void
-+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline void
-+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline void
-+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-+ enum dma_data_direction direction)
-+{
-+ BUG();
-+}
-+
-+static inline int
-+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+#endif
-+
-+/* Now for the API extensions over the pci_ one */
-+
-+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-+#define dma_is_consistent(d, h) (1)
-+
-+static inline int
-+dma_get_cache_alignment(void)
-+{
-+ /* no easy way to get cache size on all processors, so return
-+ * the maximum possible, to be safe */
-+ return (1 << INTERNODE_CACHE_SHIFT);
-+}
-+
-+static inline void
-+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-+ unsigned long offset, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ /* just sync everything, that's all the pci API can do */
-+ dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
-+}
-+
-+static inline void
-+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-+ unsigned long offset, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ /* just sync everything, that's all the pci API can do */
-+ dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
-+}
-+
-+static inline void
-+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-+ enum dma_data_direction direction)
-+{
-+ /* could define this in terms of the dma_cache ... operations,
-+ * but if you get this on a platform, you should convert the platform
-+ * to using the generic device DMA API */
-+ BUG();
-+}
-+
-+#endif /* _ASM_UBICOM32_DMA_MAPPING_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/elf.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/elf.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/elf.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/elf.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,173 @@
-+/*
-+ * arch/ubicom32/include/asm/elf.h
-+ * Definitions for elf executable format for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_ELF_H
-+#define _ASM_UBICOM32_ELF_H
-+
-+/*
-+ * ELF register definitions..
-+ */
-+
-+#include <asm/ptrace.h>
-+#include <asm/user.h>
-+
-+/*
-+ * Processor specific flags for the ELF header e_flags field.
-+ */
-+#define EF_UBICOM32_V3 0x00000001 /* -fmarch=ubicom32v3 */
-+#define EF_UBICOM32_V4 0x00000002 /* -fmarch=ubicom32v4 */
-+#define EF_UBICOM32_PIC 0x80000000 /* -fpic */
-+#define EF_UBICOM32_FDPIC 0x40000000 /* -mfdpic */
-+
-+/*
-+ * Ubicom32 ELF relocation types
-+ */
-+#define R_UBICOM32_NONE 0
-+#define R_UBICOM32_16 1
-+#define R_UBICOM32_32 2
-+#define R_UBICOM32_LO16 3
-+#define R_UBICOM32_HI16 4
-+#define R_UBICOM32_21_PCREL 5
-+#define R_UBICOM32_24_PCREL 6
-+#define R_UBICOM32_HI24 7
-+#define R_UBICOM32_LO7_S 8
-+#define R_UBICOM32_LO7_2_S 9
-+#define R_UBICOM32_LO7_4_S 10
-+#define R_UBICOM32_LO7_D 11
-+#define R_UBICOM32_LO7_2_D 12
-+#define R_UBICOM32_LO7_4_D 13
-+#define R_UBICOM32_32_HARVARD 14
-+#define R_UBICOM32_LO7_CALLI 15
-+#define R_UBICOM32_LO16_CALLI 16
-+#define R_UBICOM32_GOT_HI24 17
-+#define R_UBICOM32_GOT_LO7_S 18
-+#define R_UBICOM32_GOT_LO7_2_S 19
-+#define R_UBICOM32_GOT_LO7_4_S 20
-+#define R_UBICOM32_GOT_LO7_D 21
-+#define R_UBICOM32_GOT_LO7_2_D 22
-+#define R_UBICOM32_GOT_LO7_4_D 23
-+#define R_UBICOM32_FUNCDESC_GOT_HI24 24
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_S 25
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_2_S 26
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_4_S 27
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_D 28
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_2_D 29
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_4_D 30
-+#define R_UBICOM32_GOT_LO7_CALLI 31
-+#define R_UBICOM32_FUNCDESC_GOT_LO7_CALLI 32
-+#define R_UBICOM32_FUNCDESC_VALUE 33
-+#define R_UBICOM32_FUNCDESC 34
-+#define R_UBICOM32_GOTOFFSET_LO 35
-+#define R_UBICOM32_GOTOFFSET_HI 36
-+#define R_UBICOM32_FUNCDESC_GOTOFFSET_LO 37
-+#define R_UBICOM32_FUNCDESC_GOTOFFSET_HI 38
-+#define R_UBICOM32_GNU_VTINHERIT 200
-+#define R_UBICOM32_GNU_VTENTRY 201
-+
-+typedef unsigned long elf_greg_t;
-+
-+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
-+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-+
-+typedef struct user_ubicom32fp_struct elf_fpregset_t;
-+
-+/*
-+ * This is used to ensure we don't load something for the wrong architecture.
-+ */
-+#define elf_check_arch(x) ((x)->e_machine == EM_UBICOM32)
-+
-+#define elf_check_fdpic(x) ((x)->e_flags & EF_UBICOM32_FDPIC)
-+
-+#define elf_check_const_displacement(x) ((x)->e_flags & EF_UBICOM32_PIC)
-+
-+/*
-+ * These are used to set parameters in the core dumps.
-+ */
-+#define ELF_CLASS ELFCLASS32
-+#define ELF_DATA ELFDATA2MSB
-+#define ELF_ARCH EM_UBICOM32
-+
-+/* For SVR4/m68k the function pointer to be registered with `atexit' is
-+ passed in %a1. Although my copy of the ABI has no such statement, it
-+ is actually used on ASV. */
-+#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-+
-+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, \
-+ _dynamic_addr) \
-+ do { \
-+ _regs->dn[1] = _exec_map_addr; \
-+ _regs->dn[2] = _interp_map_addr; \
-+ _regs->dn[3] = _dynamic_addr; \
-+ _regs->an[1] = 0; /* dl_fini will be set by ldso */ \
-+ } while (0)
-+
-+#define USE_ELF_CORE_DUMP
-+#define ELF_EXEC_PAGESIZE 4096
-+
-+#ifdef __KERNEL__
-+#ifdef CONFIG_UBICOM32_V4
-+#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V4)
-+#elif defined CONFIG_UBICOM32_V3
-+#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V3)
-+#else
-+#error Unknown/Unsupported ubicom32 architecture.
-+#endif
-+#endif
-+
-+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
-+ use of this is to invoke "./ld.so someprog" to test out a new version of
-+ the loader. We need to make sure that it is out of the way of the program
-+ that it will "exec", and that there is sufficient room for the brk. */
-+
-+#define ELF_ET_DYN_BASE 0xD0000000UL
-+
-+/*
-+ * For Ubicom32, the elf_gregset_t and struct pt_regs are the same size
-+ * data structure so a copy is performed instead of providing the
-+ * ELF_CORE_COPY_REGS macro.
-+ */
-+
-+/*
-+ * ELF_CORE_COPY_TASK_REGS is needed to dump register state from multi threaded user projects.
-+ */
-+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
-+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-+
-+/* This yields a mask that user programs can use to figure out what
-+ instruction set this cpu supports. */
-+
-+#define ELF_HWCAP (0)
-+
-+/* This yields a string that ld.so will use to load implementation
-+ specific libraries for optimization. This is more specific in
-+ intent than poking at uname or /proc/cpuinfo. */
-+
-+#define ELF_PLATFORM (NULL)
-+
-+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-+
-+#endif /* _ASM_UBICOM32_ELF_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/emergency-restart.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/emergency-restart.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/emergency-restart.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/emergency-restart.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/emergency-restart.h
-+ * Generic emergency-restart.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_EMERGENCY_RESTART_H
-+#define _ASM_UBICOM32_EMERGENCY_RESTART_H
-+
-+#include <asm-generic/emergency-restart.h>
-+
-+#endif /* _ASM_UBICOM32_EMERGENCY_RESTART_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/entry.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/entry.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/entry.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/entry.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/include/asm/entry.h
-+ * Entry register/stack definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_ENTRY_H
-+#define _ASM_UBICOM32_ENTRY_H
-+
-+#include <asm/setup.h>
-+#include <asm/page.h>
-+
-+#endif /* _ASM_UBICOM32_ENTRY_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/errno.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/errno.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/errno.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/errno.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/errno.h
-+ * Generic errno.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_ERRNO_H
-+#define _ASM_UBICOM32_ERRNO_H
-+
-+#include <asm-generic/errno.h>
-+
-+#endif /* _ASM_UBICOM32_ERRNO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/fb.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/fb.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/fb.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/fb.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,39 @@
-+/*
-+ * arch/ubicom32/include/asm/fb.h
-+ * Definition of fb_is_primary_device() for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_FB_H
-+#define _ASM_UBICOM32_FB_H
-+#include <linux/fb.h>
-+
-+#define fb_pgprotect(...) do {} while (0)
-+
-+static inline int fb_is_primary_device(struct fb_info *info)
-+{
-+ return 0;
-+}
-+
-+#endif /* _ASM_UBICOM32_FB_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/fcntl.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/fcntl.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/fcntl.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/fcntl.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/ubicom32/include/asm/fcntl.h
-+ * File control bit definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_FCNTL_H
-+#define _ASM_UBICOM32_FCNTL_H
-+
-+#define O_DIRECTORY 040000 /* must be a directory */
-+#define O_NOFOLLOW 0100000 /* don't follow links */
-+#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
-+#define O_LARGEFILE 0400000
-+
-+#include <asm-generic/fcntl.h>
-+
-+#endif /* _ASM_UBICOM32_FCNTL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/flat.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/flat.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/flat.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/flat.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,73 @@
-+/*
-+ * arch/ubicom32/include/asm/flat.h
-+ * Definitions to support flat-format executables.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_FLAT_H
-+#define _ASM_UBICOM32_FLAT_H
-+
-+#define ARCH_FLAT_ALIGN 0x80
-+#define ARCH_FLAT_ALIGN_TEXT 1
-+
-+#define R_UBICOM32_32 2
-+#define R_UBICOM32_HI24 7
-+#define R_UBICOM32_LO7_S 8
-+#define R_UBICOM32_LO7_2_S 9
-+#define R_UBICOM32_LO7_4_S 10
-+#define R_UBICOM32_LO7_D 11
-+#define R_UBICOM32_LO7_2_D 12
-+#define R_UBICOM32_LO7_4_D 13
-+#define R_UBICOM32_LO7_CALLI 15
-+#define R_UBICOM32_LO16_CALLI 16
-+
-+extern void ubicom32_flat_put_addr_at_rp(unsigned long *rp, u32_t val, u32_t rval, unsigned long *p);
-+extern unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp, u32_t relval, u32_t flags, unsigned long *p);
-+
-+#define flat_stack_align(sp) /* nothing needed */
-+#define flat_argvp_envp_on_stack() 1
-+#define flat_old_ram_flag(flags) (flags)
-+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-+#define flat_get_addr_from_rp(rp, relval, flags, p) (ubicom32_flat_get_addr_from_rp(rp, relval,flags, p))
-+#define flat_put_addr_at_rp(rp, val, relval) do {ubicom32_flat_put_addr_at_rp(rp, val, relval, &persistent);} while(0)
-+#define flat_get_relocate_addr(rel) ((persistent) ? (persistent & 0x07ffffff) : (rel & 0x07ffffff))
-+
-+static inline int flat_set_persistent(unsigned int relval, unsigned long *p)
-+{
-+ if (*p) {
-+ return 0;
-+ } else {
-+ if ((relval >> 27) != R_UBICOM32_32) {
-+ /*
-+ * Something other than UBICOM32_32. The next entry has the relocation.
-+ */
-+ *p = relval;
-+ return 1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+#endif /* _ASM_UBICOM32_FLAT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/fpu.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/fpu.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/fpu.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/fpu.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,37 @@
-+/*
-+ * arch/ubicom32/include/asm/fpu.h
-+ * Floating point state definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_FPU_H
-+#define _ASM_UBICOM32_FPU_H
-+
-+/*
-+ * MAX floating point unit state size (FSAVE/FRESTORE)
-+ */
-+/* No FP unit present then... */
-+#define FPSTATESIZE (2) /* dummy size */
-+
-+#endif /* _ASM_UBICOM32_FPU_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ftrace.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ftrace.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ftrace.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ftrace.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1 @@
-+/* empty */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/futex.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/futex.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/futex.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/futex.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/futex.h
-+ * Generic futex.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_FUTEX_H
-+#define _ASM_UBICOM32_FUTEX_H
-+
-+#include <asm-generic/futex.h>
-+
-+#endif /* _ASM_UBICOM32_FUTEX_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/.gitignore linux-2.6.30.10-ubi/arch/ubicom32/include/asm/.gitignore
---- linux-2.6.30.10/arch/ubicom32/include/asm/.gitignore 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/.gitignore 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1 @@
-+/ocm_size.h
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/gpio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/gpio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/gpio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/gpio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,453 @@
-+/*
-+ * arch/ubicom32/include/asm/gpio.h
-+ * Definitions for GPIO operations on Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_GPIO_H
-+#define _ASM_UBICOM32_GPIO_H
-+
-+#include <linux/compiler.h>
-+#include <asm/irq.h>
-+
-+#include <asm/ip5000.h>
-+
-+#define ARCH_NR_GPIOS 512
-+#define MAX_UBICOM_ONCHIP_GPIO (9 * 32)
-+
-+/*
-+ * Macros for manipulating GPIO numbers
-+ */
-+#define gpio_bit(gn) (1 << (gn & 0x1f))
-+#define gpio_bank(gn) (gn >> 5)
-+
-+#define gpio_pin_index(gn) (gn & 0x1f)
-+#define gpio_port_index(gn) (gn >> 5)
-+
-+#define GPIO_RA_0 ((32 * 0) + 0)
-+#define GPIO_RA_1 ((32 * 0) + 1)
-+#define GPIO_RA_2 ((32 * 0) + 2)
-+#define GPIO_RA_3 ((32 * 0) + 3)
-+#define GPIO_RA_4 ((32 * 0) + 4)
-+#define GPIO_RA_5 ((32 * 0) + 5)
-+#define GPIO_RA_6 ((32 * 0) + 6)
-+#define GPIO_RA_7 ((32 * 0) + 7)
-+
-+#define GPIO_RB_0 ((32 * 1) + 0)
-+#define GPIO_RB_1 ((32 * 1) + 1)
-+#define GPIO_RB_2 ((32 * 1) + 2)
-+#define GPIO_RB_3 ((32 * 1) + 3)
-+#define GPIO_RB_4 ((32 * 1) + 4)
-+#define GPIO_RB_5 ((32 * 1) + 5)
-+#define GPIO_RB_6 ((32 * 1) + 6)
-+#define GPIO_RB_7 ((32 * 1) + 7)
-+#define GPIO_RB_8 ((32 * 1) + 8)
-+#define GPIO_RB_9 ((32 * 1) + 9)
-+#define GPIO_RB_10 ((32 * 1) + 10)
-+#define GPIO_RB_11 ((32 * 1) + 11)
-+#define GPIO_RB_12 ((32 * 1) + 12)
-+#define GPIO_RB_13 ((32 * 1) + 13)
-+#define GPIO_RB_14 ((32 * 1) + 14)
-+#define GPIO_RB_15 ((32 * 1) + 15)
-+#define GPIO_RB_16 ((32 * 1) + 16)
-+#define GPIO_RB_17 ((32 * 1) + 17)
-+#define GPIO_RB_18 ((32 * 1) + 18)
-+#define GPIO_RB_19 ((32 * 1) + 19)
-+
-+#define GPIO_RC_0 ((32 * 2) + 0)
-+#define GPIO_RC_1 ((32 * 2) + 1)
-+#define GPIO_RC_2 ((32 * 2) + 2)
-+#define GPIO_RC_3 ((32 * 2) + 3)
-+#define GPIO_RC_4 ((32 * 2) + 4)
-+#define GPIO_RC_5 ((32 * 2) + 5)
-+#define GPIO_RC_6 ((32 * 2) + 6)
-+#define GPIO_RC_7 ((32 * 2) + 7)
-+#define GPIO_RC_8 ((32 * 2) + 8)
-+#define GPIO_RC_9 ((32 * 2) + 9)
-+#define GPIO_RC_10 ((32 * 2) + 10)
-+#define GPIO_RC_11 ((32 * 2) + 11)
-+#define GPIO_RC_12 ((32 * 2) + 12)
-+#define GPIO_RC_13 ((32 * 2) + 13)
-+#define GPIO_RC_14 ((32 * 2) + 14)
-+#define GPIO_RC_15 ((32 * 2) + 15)
-+#define GPIO_RC_16 ((32 * 2) + 16)
-+#define GPIO_RC_17 ((32 * 2) + 17)
-+#define GPIO_RC_18 ((32 * 2) + 18)
-+#define GPIO_RC_19 ((32 * 2) + 19)
-+#define GPIO_RC_20 ((32 * 2) + 20)
-+#define GPIO_RC_21 ((32 * 2) + 21)
-+#define GPIO_RC_22 ((32 * 2) + 22)
-+#define GPIO_RC_23 ((32 * 2) + 23)
-+#define GPIO_RC_24 ((32 * 2) + 24)
-+#define GPIO_RC_25 ((32 * 2) + 25)
-+#define GPIO_RC_26 ((32 * 2) + 26)
-+#define GPIO_RC_27 ((32 * 2) + 27)
-+#define GPIO_RC_28 ((32 * 2) + 28)
-+#define GPIO_RC_29 ((32 * 2) + 29)
-+#define GPIO_RC_30 ((32 * 2) + 30)
-+#define GPIO_RC_31 ((32 * 2) + 31)
-+
-+#define GPIO_RD_0 ((32 * 3) + 0)
-+#define GPIO_RD_1 ((32 * 3) + 1)
-+#define GPIO_RD_2 ((32 * 3) + 2)
-+#define GPIO_RD_3 ((32 * 3) + 3)
-+#define GPIO_RD_4 ((32 * 3) + 4)
-+#define GPIO_RD_5 ((32 * 3) + 5)
-+#define GPIO_RD_6 ((32 * 3) + 6)
-+#define GPIO_RD_7 ((32 * 3) + 7)
-+#define GPIO_RD_8 ((32 * 3) + 8)
-+#define GPIO_RD_9 ((32 * 3) + 9)
-+#define GPIO_RD_10 ((32 * 3) + 10)
-+#define GPIO_RD_11 ((32 * 3) + 11)
-+
-+#define GPIO_RE_0 ((32 * 4) + 0)
-+#define GPIO_RE_1 ((32 * 4) + 1)
-+#define GPIO_RE_2 ((32 * 4) + 2)
-+#define GPIO_RE_3 ((32 * 4) + 3)
-+#define GPIO_RE_4 ((32 * 4) + 4)
-+#define GPIO_RE_5 ((32 * 4) + 5)
-+#define GPIO_RE_6 ((32 * 4) + 6)
-+#define GPIO_RE_7 ((32 * 4) + 7)
-+
-+#define GPIO_RF_0 ((32 * 5) + 0)
-+#define GPIO_RF_1 ((32 * 5) + 1)
-+#define GPIO_RF_2 ((32 * 5) + 2)
-+#define GPIO_RF_3 ((32 * 5) + 3)
-+#define GPIO_RF_4 ((32 * 5) + 4)
-+#define GPIO_RF_5 ((32 * 5) + 5)
-+#define GPIO_RF_6 ((32 * 5) + 6)
-+#define GPIO_RF_7 ((32 * 5) + 7)
-+#define GPIO_RF_8 ((32 * 5) + 8)
-+#define GPIO_RF_9 ((32 * 5) + 9)
-+#define GPIO_RF_10 ((32 * 5) + 10)
-+#define GPIO_RF_11 ((32 * 5) + 11)
-+#define GPIO_RF_12 ((32 * 5) + 12)
-+#define GPIO_RF_13 ((32 * 5) + 13)
-+#define GPIO_RF_14 ((32 * 5) + 14)
-+#define GPIO_RF_15 ((32 * 5) + 15)
-+
-+#define GPIO_RG_0 ((32 * 6) + 0)
-+#define GPIO_RG_1 ((32 * 6) + 1)
-+#define GPIO_RG_2 ((32 * 6) + 2)
-+#define GPIO_RG_3 ((32 * 6) + 3)
-+#define GPIO_RG_4 ((32 * 6) + 4)
-+#define GPIO_RG_5 ((32 * 6) + 5)
-+#define GPIO_RG_6 ((32 * 6) + 6)
-+#define GPIO_RG_7 ((32 * 6) + 7)
-+#define GPIO_RG_8 ((32 * 6) + 8)
-+#define GPIO_RG_9 ((32 * 6) + 9)
-+#define GPIO_RG_10 ((32 * 6) + 10)
-+#define GPIO_RG_11 ((32 * 6) + 11)
-+#define GPIO_RG_12 ((32 * 6) + 12)
-+#define GPIO_RG_13 ((32 * 6) + 13)
-+#define GPIO_RG_14 ((32 * 6) + 14)
-+#define GPIO_RG_15 ((32 * 6) + 15)
-+#define GPIO_RG_16 ((32 * 6) + 16)
-+#define GPIO_RG_17 ((32 * 6) + 17)
-+#define GPIO_RG_18 ((32 * 6) + 18)
-+#define GPIO_RG_19 ((32 * 6) + 19)
-+#define GPIO_RG_20 ((32 * 6) + 20)
-+#define GPIO_RG_21 ((32 * 6) + 21)
-+#define GPIO_RG_22 ((32 * 6) + 22)
-+#define GPIO_RG_23 ((32 * 6) + 23)
-+#define GPIO_RG_24 ((32 * 6) + 24)
-+#define GPIO_RG_25 ((32 * 6) + 25)
-+#define GPIO_RG_26 ((32 * 6) + 26)
-+#define GPIO_RG_27 ((32 * 6) + 27)
-+#define GPIO_RG_28 ((32 * 6) + 28)
-+#define GPIO_RG_29 ((32 * 6) + 29)
-+#define GPIO_RG_30 ((32 * 6) + 30)
-+#define GPIO_RG_31 ((32 * 6) + 31)
-+
-+#define GPIO_RH_0 ((32 * 7) + 0)
-+#define GPIO_RH_1 ((32 * 7) + 1)
-+#define GPIO_RH_2 ((32 * 7) + 2)
-+#define GPIO_RH_3 ((32 * 7) + 3)
-+#define GPIO_RH_4 ((32 * 7) + 4)
-+#define GPIO_RH_5 ((32 * 7) + 5)
-+#define GPIO_RH_6 ((32 * 7) + 6)
-+#define GPIO_RH_7 ((32 * 7) + 7)
-+#define GPIO_RH_8 ((32 * 7) + 8)
-+#define GPIO_RH_9 ((32 * 7) + 9)
-+
-+#define GPIO_RI_0 ((32 * 8) + 0)
-+#define GPIO_RI_1 ((32 * 8) + 1)
-+#define GPIO_RI_2 ((32 * 8) + 2)
-+#define GPIO_RI_3 ((32 * 8) + 3)
-+#define GPIO_RI_4 ((32 * 8) + 4)
-+#define GPIO_RI_5 ((32 * 8) + 5)
-+#define GPIO_RI_6 ((32 * 8) + 6)
-+#define GPIO_RI_7 ((32 * 8) + 7)
-+#define GPIO_RI_8 ((32 * 8) + 8)
-+#define GPIO_RI_9 ((32 * 8) + 9)
-+#define GPIO_RI_10 ((32 * 8) + 10)
-+#define GPIO_RI_11 ((32 * 8) + 11)
-+#define GPIO_RI_12 ((32 * 8) + 12)
-+#define GPIO_RI_13 ((32 * 8) + 13)
-+#define GPIO_RI_14 ((32 * 8) + 14)
-+#define GPIO_RI_15 ((32 * 8) + 15)
-+
-+/*
-+ * The following section defines extra GPIO available to some boards.
-+ * These GPIO are generally external to the processor (i.e. SPI/I2C
-+ * expander chips).
-+ *
-+ * Note that these defines show all possible GPIO available, however,
-+ * depending on the actual board configuration, some GPIO are not
-+ * available for use.
-+ */
-+#ifdef CONFIG_IP7500MEDIA
-+/*
-+ * U15
-+ */
-+#define IP7500MEDIA_U15_BASE (32 * 10)
-+#define IP7500MEDIA_IO0 (IP7500MEDIA_U15_BASE + 0)
-+#define IP7500MEDIA_IO1 (IP7500MEDIA_U15_BASE + 1)
-+#define IP7500MEDIA_IO2 (IP7500MEDIA_U15_BASE + 2)
-+#define IP7500MEDIA_IO3 (IP7500MEDIA_U15_BASE + 3)
-+#define IP7500MEDIA_IO4 (IP7500MEDIA_U15_BASE + 4)
-+#define IP7500MEDIA_IO5 (IP7500MEDIA_U15_BASE + 5)
-+#define IP7500MEDIA_IO6 (IP7500MEDIA_U15_BASE + 6)
-+#define IP7500MEDIA_IO7 (IP7500MEDIA_U15_BASE + 7)
-+
-+/*
-+ * U16
-+ */
-+#define IP7500MEDIA_U16_BASE (32 * 11)
-+#define IP7500MEDIA_IO8 (IP7500MEDIA_U16_BASE + 0)
-+#define IP7500MEDIA_IO9 (IP7500MEDIA_U16_BASE + 1)
-+#define IP7500MEDIA_IO10 (IP7500MEDIA_U16_BASE + 2)
-+#define IP7500MEDIA_IO11 (IP7500MEDIA_U16_BASE + 3)
-+#define IP7500MEDIA_IO12 (IP7500MEDIA_U16_BASE + 4)
-+#define IP7500MEDIA_IO13 (IP7500MEDIA_U16_BASE + 5)
-+#define IP7500MEDIA_IO14 (IP7500MEDIA_U16_BASE + 6)
-+#define IP7500MEDIA_IO15 (IP7500MEDIA_U16_BASE + 7)
-+
-+/*
-+ * U17
-+ */
-+#define IP7500MEDIA_U17_BASE (32 * 12)
-+#define IP7500MEDIA_IO16 (IP7500MEDIA_U17_BASE + 0)
-+#define IP7500MEDIA_IO17 (IP7500MEDIA_U17_BASE + 1)
-+#define IP7500MEDIA_IO18 (IP7500MEDIA_U17_BASE + 2)
-+#define IP7500MEDIA_IO19 (IP7500MEDIA_U17_BASE + 3)
-+#define IP7500MEDIA_IO20 (IP7500MEDIA_U17_BASE + 4)
-+#define IP7500MEDIA_IO21 (IP7500MEDIA_U17_BASE + 5)
-+#define IP7500MEDIA_IO22 (IP7500MEDIA_U17_BASE + 6)
-+#define IP7500MEDIA_IO23 (IP7500MEDIA_U17_BASE + 7)
-+
-+/*
-+ * U18
-+ */
-+#define IP7500MEDIA_U18_BASE (32 * 13)
-+#define IP7500MEDIA_IO24 (IP7500MEDIA_U18_BASE + 0)
-+#define IP7500MEDIA_IO25 (IP7500MEDIA_U18_BASE + 1)
-+#define IP7500MEDIA_IO26 (IP7500MEDIA_U18_BASE + 2)
-+#define IP7500MEDIA_IO27 (IP7500MEDIA_U18_BASE + 3)
-+#define IP7500MEDIA_IO28 (IP7500MEDIA_U18_BASE + 4)
-+#define IP7500MEDIA_IO29 (IP7500MEDIA_U18_BASE + 5)
-+#define IP7500MEDIA_IO30 (IP7500MEDIA_U18_BASE + 6)
-+#define IP7500MEDIA_IO31 (IP7500MEDIA_U18_BASE + 7)
-+#endif
-+
-+#ifdef CONFIG_IP7145DPF
-+/*
-+ * U48
-+ */
-+#define IP7145DPF_U48_BASE (32 * 10)
-+#define IP7145DPF_IO0 (IP7145DPF_U48_BASE + 0)
-+#define IP7145DPF_IO1 (IP7145DPF_U48_BASE + 1)
-+#define IP7145DPF_IO2 (IP7145DPF_U48_BASE + 2)
-+#define IP7145DPF_IO3 (IP7145DPF_U48_BASE + 3)
-+#define IP7145DPF_IO4 (IP7145DPF_U48_BASE + 4)
-+#define IP7145DPF_IO5 (IP7145DPF_U48_BASE + 5)
-+#define IP7145DPF_IO6 (IP7145DPF_U48_BASE + 6)
-+#define IP7145DPF_IO7 (IP7145DPF_U48_BASE + 7)
-+
-+/*
-+ * U72
-+ */
-+#define IP7145DPF_U72_BASE (32 * 11)
-+#define IP7145DPF_IOB0 (IP7145DPF_U72_BASE + 0)
-+#define IP7145DPF_IOB1 (IP7145DPF_U72_BASE + 1)
-+#define IP7145DPF_IOB2 (IP7145DPF_U72_BASE + 2)
-+#define IP7145DPF_IOB3 (IP7145DPF_U72_BASE + 3)
-+#define IP7145DPF_IOB4 (IP7145DPF_U72_BASE + 4)
-+#define IP7145DPF_IOB5 (IP7145DPF_U72_BASE + 5)
-+#define IP7145DPF_IOB6 (IP7145DPF_U72_BASE + 6)
-+#define IP7145DPF_IOB7 (IP7145DPF_U72_BASE + 7)
-+#endif
-+
-+#include <asm-generic/gpio.h>
-+
-+/*
-+ * The following macros bypass gpiolib to generate direct references
-+ * to the port registers. These assume, minimally, that either
-+ * gpio_direction_input() or gpio_direction_output() have already been
-+ * called to setup the pin direction and to enable the pin function to
-+ * be gpio. These macros generate the hardware port address based on
-+ * the assumption that all ports are 32 bits wide (even though we know
-+ * they are not). This is so we can efficiently turn pin numbers into
-+ * port addresses without a lookup.
-+ *
-+ * These operations must be done in one instruction to prevent clobbering
-+ * other thread's accesses to the same port.
-+ */
-+#define UBICOM32_GPIO_ENABLE(pin) \
-+ do { \
-+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
-+ [mask] "d" (gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_DISABLE(pin) \
-+ do { \
-+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
-+ [mask] "d" (~gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_SET_PIN_INPUT(pin) \
-+ do { \
-+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
-+ [mask] "d" (~gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_SET_PIN_OUTPUT(pin) \
-+ do { \
-+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
-+ [mask] "d" (gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_SET_PIN_TOGGLE(pin) \
-+ do { \
-+ asm volatile ("xor.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
-+ [mask] "d" (gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_SET_PIN_HIGH(pin) \
-+ do { \
-+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
-+ [mask] "d" (gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_SET_PIN_LOW(pin) \
-+ do { \
-+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
-+ : \
-+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
-+ [mask] "d" (~gpio_bit(pin)) \
-+ : "cc", "memory" \
-+ ); \
-+ } while (0);
-+
-+#define UBICOM32_GPIO_SET_PIN(pin, val) \
-+ if ( val ) { \
-+ UBICOM32_GPIO_SET_PIN_HIGH(pin); \
-+ } else { \
-+ UBICOM32_GPIO_SET_PIN_LOW(pin); \
-+ }
-+
-+#define UBICOM32_GPIO_GET_PIN(pin) \
-+ (0 != (UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_in \
-+ & gpio_bit(pin)))
-+
-+
-+static inline int gpio_get_value(unsigned gpio)
-+{
-+ if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
-+ return UBICOM32_GPIO_GET_PIN(gpio);
-+ else
-+ return __gpio_get_value(gpio);
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value)
-+{
-+ if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
-+ {
-+ UBICOM32_GPIO_SET_PIN(gpio, value);
-+ }
-+ else
-+ {
-+ __gpio_set_value(gpio, value);
-+ }
-+}
-+
-+static inline int gpio_cansleep(unsigned gpio)
-+{
-+ return __gpio_cansleep(gpio);
-+}
-+
-+static inline int gpio_to_irq(unsigned gpio)
-+{
-+#if defined(IP5000) || defined(IP5000_REV2)
-+ if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
-+ return 25;
-+ else
-+ return -ENXIO;
-+
-+#elif defined(IP7000) || defined(IP7000_REV2)
-+ if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
-+ return 44 + (gpio - GPIO_RA_4);
-+ else
-+ return -ENXIO;
-+
-+#else
-+ return -ENXIO;
-+
-+#endif
-+}
-+
-+static inline int irq_to_gpio(unsigned gpio)
-+{
-+ return -ENXIO;
-+}
-+
-+extern struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio);
-+
-+extern int __init ubi_gpio_init(void);
-+
-+#endif /* _ASM_UBICOM32_GPIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/hardirq.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/hardirq.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/hardirq.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/hardirq.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,55 @@
-+/*
-+ * arch/ubicom32/include/asm/hardirq.h
-+ * Definition of ack_bad_irq() for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
-+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
-+ * Copyright (C) 2001 MIPS Technologies, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_HARDIRQ_H
-+#define _ASM_UBICOM32_HARDIRQ_H
-+
-+#include <linux/threads.h>
-+#include <linux/irq.h>
-+
-+/*
-+ * The hardirq mask has to be large enough to have space
-+ * for potentially all IRQ sources in the system nesting
-+ * on a single CPU. For Ubicom32, we have 64 IRQ sources.
-+ */
-+#define HARDIRQ_BITS 6
-+#if (1 << HARDIRQ_BITS) < NR_IRQS
-+# error HARDIRQ_BITS is too low!
-+#endif
-+
-+typedef struct {
-+ unsigned int __softirq_pending;
-+} ____cacheline_aligned irq_cpustat_t;
-+
-+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-+
-+extern void ack_bad_irq(unsigned int irq);
-+
-+#endif /* _ASM_UBICOM32_HARDIRQ_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/hw_irq.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/hw_irq.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/hw_irq.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/hw_irq.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,31 @@
-+/*
-+ * arch/ubicom32/include/asm/hw_irq.h
-+ * Ubicom32 architecture APIC support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_HW_IRQ_H
-+#define _ASM_UBICOM32_HW_IRQ_H
-+
-+#endif /* _ASM_UBICOM32_HW_IRQ_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ioctl.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ioctl.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ioctl.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ioctl.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/ioctl.h
-+ * Generic ioctl.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IOCTL_H
-+#define _ASM_UBICOM32_IOCTL_H
-+
-+#include <asm-generic/ioctl.h>
-+
-+#endif /* _ASM_UBICOM32_IOCTL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ioctls.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ioctls.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ioctls.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ioctls.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,111 @@
-+/*
-+ * arch/ubicom32/include/asm/ioctls.h
-+ * Definitions of ioctls for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IOCTLS_H
-+#define _ASM_UBICOM32_IOCTLS_H
-+
-+#include <asm/ioctl.h>
-+
-+/* 0x54 is just a magic number to make these relatively unique ('T') */
-+
-+#define TCGETS 0x5401
-+#define TCSETS 0x5402
-+#define TCSETSW 0x5403
-+#define TCSETSF 0x5404
-+#define TCGETA 0x5405
-+#define TCSETA 0x5406
-+#define TCSETAW 0x5407
-+#define TCSETAF 0x5408
-+#define TCSBRK 0x5409
-+#define TCXONC 0x540A
-+#define TCFLSH 0x540B
-+#define TIOCEXCL 0x540C
-+#define TIOCNXCL 0x540D
-+#define TIOCSCTTY 0x540E
-+#define TIOCGPGRP 0x540F
-+#define TIOCSPGRP 0x5410
-+#define TIOCOUTQ 0x5411
-+#define TIOCSTI 0x5412
-+#define TIOCGWINSZ 0x5413
-+#define TIOCSWINSZ 0x5414
-+#define TIOCMGET 0x5415
-+#define TIOCMBIS 0x5416
-+#define TIOCMBIC 0x5417
-+#define TIOCMSET 0x5418
-+#define TIOCGSOFTCAR 0x5419
-+#define TIOCSSOFTCAR 0x541A
-+#define FIONREAD 0x541B
-+#define TIOCINQ FIONREAD
-+#define TIOCLINUX 0x541C
-+#define TIOCCONS 0x541D
-+#define TIOCGSERIAL 0x541E
-+#define TIOCSSERIAL 0x541F
-+#define TIOCPKT 0x5420
-+#define FIONBIO 0x5421
-+#define TIOCNOTTY 0x5422
-+#define TIOCSETD 0x5423
-+#define TIOCGETD 0x5424
-+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-+#define TIOCSBRK 0x5427 /* BSD compatibility */
-+#define TIOCCBRK 0x5428 /* BSD compatibility */
-+#define TIOCGSID 0x5429 /* Return the session ID of FD */
-+#define TCGETS2 _IOR('T',0x2A, struct termios2)
-+#define TCSETS2 _IOW('T',0x2B, struct termios2)
-+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-+
-+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-+#define FIOCLEX 0x5451
-+#define FIOASYNC 0x5452
-+#define TIOCSERCONFIG 0x5453
-+#define TIOCSERGWILD 0x5454
-+#define TIOCSERSWILD 0x5455
-+#define TIOCGLCKTRMIOS 0x5456
-+#define TIOCSLCKTRMIOS 0x5457
-+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-+#define TIOCSERGETLSR 0x5459 /* Get line status register */
-+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-+
-+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-+#define FIOQSIZE 0x545E
-+
-+/* Used for packet mode */
-+#define TIOCPKT_DATA 0
-+#define TIOCPKT_FLUSHREAD 1
-+#define TIOCPKT_FLUSHWRITE 2
-+#define TIOCPKT_STOP 4
-+#define TIOCPKT_START 8
-+#define TIOCPKT_NOSTOP 16
-+#define TIOCPKT_DOSTOP 32
-+
-+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-+
-+#endif /* _ASM_UBICOM32_IOCTLS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/io.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/io.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/io.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/io.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,313 @@
-+/*
-+ * arch/ubicom32/include/asm/io.h
-+ * I/O memory accessor functions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IO_H
-+#define _ASM_UBICOM32_IO_H
-+
-+#ifdef __KERNEL__
-+#include <linux/string.h>
-+#include <linux/compiler.h>
-+
-+static inline unsigned short _swapw(volatile unsigned short v)
-+{
-+ return ((v << 8) | (v >> 8));
-+}
-+
-+static inline unsigned int _swapl(volatile unsigned long v)
-+{
-+ return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-+}
-+
-+#ifndef CONFIG_PCI
-+#define readb(addr) \
-+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-+#define readw(addr) \
-+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-+#define readl(addr) \
-+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-+
-+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-+#else /*CONFIG_PCI */
-+
-+#define PCI_CPU_REG_BASE (0x00000000UL) /* taking lower 2GB space */
-+#define PCI_DEV_REG_BASE (0x80000000UL)
-+
-+#if PCI_CPU_REG_BASE > PCI_DEV_REG_BASE
-+#define IS_PCI_ADDRESS(x) (((unsigned int)(x)&(PCI_CPU_REG_BASE)) == 0)
-+#else
-+#define IS_PCI_ADDRESS(x) ((unsigned int)(x)&(PCI_DEV_REG_BASE))
-+#endif
-+
-+extern unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr);
-+extern unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr);
-+extern unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr);
-+extern void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr);
-+extern void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr);
-+extern void ubi32_pci_write_u8(unsigned char val, const volatile void __iomem *addr);
-+
-+static inline unsigned char readb(const volatile void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ return ubi32_pci_read_u8(addr);
-+ else
-+ return (unsigned char)(*(volatile unsigned char *)addr);
-+}
-+static inline unsigned short readw(const volatile void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ return ubi32_pci_read_u16(addr);
-+ else
-+ return (unsigned short)(*(volatile unsigned short *)addr);
-+}
-+
-+static inline unsigned int readl(const volatile void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ return ubi32_pci_read_u32(addr);
-+ else
-+ return (unsigned int)(*(volatile unsigned int *)addr);
-+}
-+
-+static inline void writel(unsigned int val, volatile void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ ubi32_pci_write_u32(val, addr);
-+ else
-+ *(volatile unsigned int *)addr = val;
-+}
-+
-+static inline void writew(unsigned short val, volatile void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ ubi32_pci_write_u16(val, addr);
-+ else
-+ *(volatile unsigned short *)addr = val;
-+}
-+
-+static inline void writeb(unsigned char val, volatile void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ ubi32_pci_write_u8(val, addr);
-+ else
-+ *(volatile unsigned char *)addr = val;
-+}
-+#endif
-+
-+#define readb_relaxed(addr) readb(addr)
-+#define readw_relaxed(addr) readw(addr)
-+#define readl_relaxed(addr) readl(addr)
-+
-+
-+#define __raw_readb readb
-+#define __raw_readw readw
-+#define __raw_readl readl
-+#define __raw_writeb writeb
-+#define __raw_writew writew
-+#define __raw_writel writel
-+
-+static inline void io_outsb(unsigned int addr, const void *buf, int len)
-+{
-+ volatile unsigned char *ap = (volatile unsigned char *) addr;
-+ unsigned char *bp = (unsigned char *) buf;
-+ while (len--)
-+ *ap = *bp++;
-+}
-+
-+static inline void io_outsw(unsigned int addr, const void *buf, int len)
-+{
-+ volatile unsigned short *ap = (volatile unsigned short *) addr;
-+ unsigned short *bp = (unsigned short *) buf;
-+ while (len--)
-+ *ap = _swapw(*bp++);
-+}
-+
-+static inline void io_outsl(unsigned int addr, const void *buf, int len)
-+{
-+ volatile unsigned int *ap = (volatile unsigned int *) addr;
-+ unsigned int *bp = (unsigned int *) buf;
-+ while (len--)
-+ *ap = _swapl(*bp++);
-+}
-+
-+static inline void io_insb(unsigned int addr, void *buf, int len)
-+{
-+ volatile unsigned char *ap = (volatile unsigned char *) addr;
-+ unsigned char *bp = (unsigned char *) buf;
-+ while (len--)
-+ *bp++ = *ap;
-+}
-+
-+static inline void io_insw(unsigned int addr, void *buf, int len)
-+{
-+ volatile unsigned short *ap = (volatile unsigned short *) addr;
-+ unsigned short *bp = (unsigned short *) buf;
-+ while (len--)
-+ *bp++ = _swapw(*ap);
-+}
-+
-+static inline void io_insl(unsigned int addr, void *buf, int len)
-+{
-+ volatile unsigned int *ap = (volatile unsigned int *) addr;
-+ unsigned int *bp = (unsigned int *) buf;
-+ while (len--)
-+ *bp++ = _swapl(*ap);
-+}
-+
-+#define mmiowb()
-+
-+/*
-+ * make the short names macros so specific devices
-+ * can override them as required
-+ */
-+#ifndef CONFIG_PCI
-+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-+#else
-+extern void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len);
-+extern void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len);
-+extern void memset_io(volatile void __iomem *addr, int val, size_t count);
-+#endif
-+
-+#define inb(addr) readb(addr)
-+#define inw(addr) readw(addr)
-+#define inl(addr) readl(addr)
-+#define outb(x,addr) ((void) writeb(x,addr))
-+#define outw(x,addr) ((void) writew(x,addr))
-+#define outl(x,addr) ((void) writel(x,addr))
-+
-+#define inb_p(addr) inb(addr)
-+#define inw_p(addr) inw(addr)
-+#define inl_p(addr) inl(addr)
-+#define outb_p(x,addr) outb(x,addr)
-+#define outw_p(x,addr) outw(x,addr)
-+#define outl_p(x,addr) outl(x,addr)
-+
-+#define outsb(a,b,l) io_outsb(a,b,l)
-+#define outsw(a,b,l) io_outsw(a,b,l)
-+#define outsl(a,b,l) io_outsl(a,b,l)
-+
-+#define insb(a,b,l) io_insb(a,b,l)
-+#define insw(a,b,l) io_insw(a,b,l)
-+#define insl(a,b,l) io_insl(a,b,l)
-+
-+#ifndef CONFIG_PCI
-+#define ioread8_rep(a,d,c) insb(a,d,c)
-+#define ioread16_rep(a,d,c) insw(a,d,c)
-+#define ioread32_rep(a,d,c) insl(a,d,c)
-+#define iowrite8_rep(a,s,c) outsb(a,s,c)
-+#define iowrite16_rep(a,s,c) outsw(a,s,c)
-+#define iowrite32_rep(a,s,c) outsl(a,s,c)
-+#else
-+extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count);
-+extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count);
-+extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count);
-+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
-+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
-+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
-+#endif
-+
-+
-+#ifndef CONFIG_PCI
-+#define ioread8(X) readb(X)
-+#define ioread16(X) readw(X)
-+#define ioread32(X) readl(X)
-+#define iowrite8(val,X) writeb(val,X)
-+#define iowrite16(val,X) writew(val,X)
-+#define iowrite32(val,X) writel(val,X)
-+#else /*CONFIG_PCI */
-+extern unsigned char ioread8(void __iomem *addr);
-+extern unsigned short ioread16(void __iomem *addr);
-+extern unsigned int ioread32(void __iomem *addr);
-+extern void iowrite8(unsigned char val, void __iomem *addr);
-+extern void iowrite16(unsigned short val, void __iomem *addr);
-+extern void iowrite32(unsigned int val, void __iomem *addr);
-+#endif /* CONFIG_PCI */
-+
-+#define IO_SPACE_LIMIT 0xffff
-+
-+/* Values for nocacheflag and cmode */
-+#define IOMAP_FULL_CACHING 0
-+#define IOMAP_NOCACHE_SER 1
-+#define IOMAP_NOCACHE_NONSER 2
-+#define IOMAP_WRITETHROUGH 3
-+
-+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-+extern void __iounmap(void *addr, unsigned long size);
-+
-+static inline void *ioremap(unsigned long physaddr, unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-+}
-+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-+}
-+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-+}
-+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-+{
-+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-+}
-+
-+extern void iounmap(void *addr);
-+
-+#define ioport_map(port, nr) ((void __iomem*)(port))
-+#define ioport_unmap(addr)
-+
-+
-+/* Pages to physical address... */
-+#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-+#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-+
-+/*
-+ * Macros used for converting between virtual and physical mappings.
-+ */
-+#define phys_to_virt(vaddr) ((void *) (vaddr))
-+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-+
-+#define virt_to_bus virt_to_phys
-+#define bus_to_virt phys_to_virt
-+
-+/*
-+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
-+ * access
-+ */
-+#define xlate_dev_mem_ptr(p) __va(p)
-+
-+/*
-+ * Convert a virtual cached pointer to an uncached pointer
-+ */
-+#define xlate_dev_kmem_ptr(p) p
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_UBICOM32_IO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ip5000-asm.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ip5000-asm.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ip5000-asm.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ip5000-asm.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,156 @@
-+/*
-+ * arch/ubicom32/include/asm/ip5000-asm.h
-+ * Instruction macros for the IP5000.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_IP5000_ASM_H
-+#define _ASM_UBICOM32_IP5000_ASM_H
-+
-+#if !defined(__LINKER__)
-+
-+#if defined(__ASSEMBLY__)
-+.macro cycles quant
-+.if (\quant) == 1
-+ nop
-+.else
-+.if (((\quant) + 3) / 8) > 0
-+.rept (((\quant) + 3) / 8)
-+ jmpt.f .+4
-+.endr
-+.endif
-+.if ((((\quant) + 3) % 8) / 4) > 0
-+ jmpt.t .+4
-+.endif
-+.endif
-+.endm
-+#else
-+/*
-+ * Same macro as above just in C inline asm
-+ */
-+asm (" \n\
-+.macro cycles quant \n\
-+.if (\\quant) == 1 \n\
-+ nop \n\
-+.else \n\
-+.if (((\\quant) + 3) / 8) > 0 \n\
-+.rept (((\\quant) + 3) / 8) \n\
-+ jmpt.f .+4 \n\
-+.endr \n\
-+.endif \n\
-+.if ((((\\quant) + 3) % 8) / 4) > 0 \n\
-+ jmpt.t .+4 \n\
-+.endif \n\
-+.endif \n\
-+.endm \n\
-+");
-+#endif
-+
-+
-+#if defined(__ASSEMBLY__)
-+.macro pipe_flush cyc
-+ cycles 11 - (\cyc)
-+.endm
-+#else
-+/*
-+ * Same macro as above just in C inline asm
-+ */
-+asm (" \n\
-+.macro pipe_flush cyc \n\
-+ cycles 11 - (\\cyc) \n\
-+.endm \n\
-+");
-+
-+#endif
-+
-+#if defined(__ASSEMBLY__)
-+.macro setcsr_flush cyc
-+ cycles 5 - (\cyc)
-+.endm
-+#else
-+/*
-+ * Same macro as above just in C inline asm
-+ */
-+asm (" \n\
-+.macro setcsr_flush cyc \n\
-+ cycles 5 - (\\cyc) \n\
-+.endm \n\
-+");
-+#endif
-+
-+/*
-+ * Macros for prefetch (using miss-aligned memory write)
-+ */
-+#if defined(__ASSEMBLY__)
-+
-+.macro pre_fetch_macro thread_num, Ascratch, Aaddress length
-+ bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
-+ bset \Ascratch, \Aaddress, #0 ; force a miss-aligned address
-+ jmpt.t .+4 ; delay for both address setup and trap disable
-+ move.4 (\Ascratch), #0
-+ .if (\length > 32)
-+ move.4 32(\Ascratch), #0
-+ .endif
-+ .if (\length > 64)
-+ move.4 64(\Ascratch), #0
-+ .endif
-+ .if (\length > 96)
-+ move.4 96(\Ascratch), #0
-+ .endif
-+ .if (\length > 128)
-+ invalid_instruction ; maximum pre-fetch size is 4 cache lines
-+ .endif
-+ bset MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
-+.endm
-+
-+#else
-+/*
-+ * Same macro as above just in C inline asm
-+ */
-+asm (" \n\
-+.macro pre_fetch_macro thread_num, Ascratch, Aaddress length \n\
-+ bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) \n\
-+ bset \\Ascratch, \\Aaddress, #0 ; force a miss-aligned address \n\
-+ jmpt.t .+4 ; delay for both address setup and trap disable \n\
-+ move.4 (\\Ascratch), #0 \n\
-+ .if (\\length > 32) \n\
-+ move.4 32(\\Ascratch), #0 \n\
-+ .endif \n\
-+ .if (\\length > 64) \n\
-+ move.4 64(\\Ascratch), #0 \n\
-+ .endif \n\
-+ .if (\\length > 96) \n\
-+ move.4 96(\\Ascratch), #0 \n\
-+ .endif \n\
-+ .if (\\length > 128) \n\
-+ invalid_instruction ; maximum pre-fetch size is 4 cache lines \n\
-+ .endif \n\
-+ bset MT_TRAP_EN, MT_TRAP_EN, #(\\thread_num) \n\
-+.endm \n\
-+");
-+#endif
-+
-+#endif /* !defined(__LINKER__) */
-+#endif /* defined _ASM_UBICOM32_IP5000_ASM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ip5000.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ip5000.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ip5000.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ip5000.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,845 @@
-+/*
-+ * arch/ubicom32/include/asm/ip5000.h
-+ * Specific details for the Ubicom IP5000 processor.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_IP5000_H
-+#define _ASM_UBICOM32_IP5000_H
-+
-+#include <asm/memory_map.h>
-+
-+/*
-+ * Inline assembly define
-+ */
-+#define S(arg) #arg
-+#define D(arg) S(arg)
-+
-+/*
-+ * Assembler include file
-+ */
-+#include <asm/ip5000-asm.h>
-+
-+/*
-+ * Timing
-+ */
-+#define JMPT_PENALTY 3
-+#define JMPF_PENALTY 7
-+#define RET_PENALTY 7
-+
-+/*
-+ * Threads
-+ */
-+#if defined(IP5000) || defined(IP5000_REV2)
-+#define THREAD_COUNT 10
-+#elif defined(IP7000) || defined(IP7000_REV2)
-+#define THREAD_COUNT 12
-+#else
-+#error "Unknown IP5K silicon"
-+#endif
-+
-+/*
-+ * Arch
-+ */
-+#if defined(IP5000) || defined(IP5000_REV2)
-+#define UBICOM32_ARCH_VERSION 3
-+#elif defined(IP7000) || defined(IP7000_REV2)
-+#define UBICOM32_ARCH_VERSION 4
-+#else
-+#error "Unknown IP5K silicon"
-+#endif
-+
-+
-+/*
-+ * Registers
-+ */
-+#define ROSR_INT (1 << 0)
-+
-+/* Interrupts */
-+#define INT_CHIP(reg, bit) (((reg) << 5) | (bit))
-+#define INT_REG(interrupt) (((interrupt) >> 5) * 4)
-+#define INT_SET(interrupt) 0x0114 + INT_REG(interrupt)
-+#define INT_CLR(interrupt) 0x0124 + INT_REG(interrupt)
-+#define INT_STAT(interrupt) 0x0104 + INT_REG(interrupt)
-+#define INT_MASK(interrupt) 0x00C0 + INT_REG(interrupt)
-+#define INT_BIT(interrupt) ((interrupt) & 0x1F)
-+#define INT_BIT_MASK(interrupt) (1 << INT_BIT(interrupt))
-+
-+/*
-+ * The LOCK_INT and THREAD_INT are used to wake up corresponding thread. They are sharing
-+ * the same set of SW interrupt resource.
-+ *
-+ * LOCK_INT(n): One SW INT per NRT thread that can participate lock operation.
-+ * The threads that can participate lock are application threads and DSR thread.
-+ * (Lock locks - numbers are hard-coded in lock.h)
-+ * THREAD_INT(n): One SW INT per HRT thread for wake up trigger.
-+ */
-+#define LOCK_INT(thread) INT_CHIP(0, (thread))
-+#define THREAD_INT(thread) INT_CHIP(0, (thread))
-+
-+/*
-+ * The SYSTEM_INT and DSR_INT are sharing the same set of SW interrupt resource.
-+ *
-+ * SYSTEM_INT(n): One SW INT per NRT threads (application threads) as system queue interrupt,
-+ * and for DSR as self-trigger interrupt.
-+ * (The application threads include at least thread 0)
-+ * DSR_INT(n): One SW INT per HRT thread to request DSR service.
-+ */
-+#define SYSTEM_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
-+#define DSR_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
-+
-+/* GLOBAL_CTRL */
-+#define GLOBAL_CTRL_TRAP_RST_EN (1 << 9)
-+#define GLOBAL_CTRL_AERROR_RST_EN (1 << 8)
-+#define GLOBAL_CTRL_MT_MIN_DELAY(x) ((x) << 3)
-+#define GLOBAL_CTRL_HRT_BANK_SELECT (1 << 2)
-+#define GLOBAL_CTRL_INT_EN (1 << 0)
-+
-+/*
-+ * HRT Tables
-+ */
-+#define HRT_TABLE0_BASE 0x0800
-+#define HRT_TABLE1_BASE 0x0900
-+#define HRT_TABLE_SIZE 64
-+
-+/*
-+ * Break Point Trap Register
-+ */
-+#define ASYNCERROR_INT INT_CHIP(0, 31)
-+#define BREAKPOINT_INT INT_CHIP(1, 31)
-+
-+/*
-+ * Port interrupts
-+ * The non-existing FIFO INTs are mapped to INT2 for the ports.
-+ */
-+#define IO_PORT_PTR_TO_NUM(port) (((port) & 0x0000ffff) >> 12)
-+#define RX_FIFO_INT(port) \
-+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 26) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 24) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 27) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 16) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 21) : \
-+ INT_CHIP(1, 15))))))))))
-+#define TX_FIFO_INT(port) \
-+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 24) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 27) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 25) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 28) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 17) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 22) : \
-+ INT_CHIP(1, 15))))))))))
-+#define PORT_OTHER_INT(port) \
-+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 28) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 26) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 29) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 18) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
-+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 23) : \
-+ INT_CHIP(1, 15))))))))))
-+
-+/*
-+ * On Chip Peripherals Base.
-+ */
-+#define OCP_BASE 0x01000000
-+#define OCP_GENERAL 0x000
-+#define OCP_TIMERS 0x100
-+#define OCP_TRNG 0x200 /* True Random Number Generator Control Reigsters */
-+#define OCP_DEBUG 0x300
-+#define OCP_SECURITY 0x400
-+#define OCP_ICCR 0x500 /* I-Cache Control Registers */
-+#define OCP_DCCR 0x600 /* D-Cache Control Registers */
-+#define OCP_OCMC 0x700 /* On Chip Memory Control Registers */
-+#define OCP_STATISTICS 0x800 /* Statistics Counters */
-+#define OCP_MTEST 0x900 /* Memory Test Registers */
-+#define OCP_MCFG 0xa00 /* Memory Configuration Registers -- IP7000 only */
-+#define OCP_DEBUG_INST 0x000 /* Up to 16M */
-+
-+/*
-+ * General Configuration Registers (PLL)
-+ */
-+#define GENERAL_CFG_BASE (OCP_BASE + OCP_GENERAL)
-+#define GEN_CLK_CORE_CFG 0x00
-+#define GEN_CLK_IO_CFG 0x04
-+#define GEN_CLK_DDR_CFG 0x08
-+#define GEN_CLK_DDRDS_CFG 0x0c
-+#define GEN_CLK_SLIP_CLR 0x10
-+#define GEN_CLK_SLIP_START 0x14
-+#define GEN_CLK_SERDES_SEL 0x18 /* IP7000 only */
-+#define GEN_CLK_DDR_CFG2 0x1c /* IP7000 only */
-+#define GEN_DDR_CAL_CTRL 0x30 /* IP5000 only */
-+#define GEN_DDR_CAL_STAT 0x34 /* IP5000 only */
-+#define GEN_USB_DFT_CTRL 0x38 /* IP5000 only */
-+#define GEN_USB_DFT_STAT 0x3c /* IP5000 only */
-+#define GEN_USB_PHY_CFG 0x40 /* IP7000 only */
-+#define GEN_USB_PHY_TEST 0x44 /* IP7000 only */
-+#define GEN_USB_PHY_STAT 0x48 /* IP7000 only */
-+#define GEN_SW_RESET 0x80
-+#define GEN_RESET_REASON 0x84
-+#define GEN_BOND_CFG 0x88
-+#define GEN_IO_PU_CFG 0x8c
-+#define GEN_MEM_RM_CFG 0x90
-+#define GEN_IO_CONFIG 0x94
-+
-+#define GEN_CLK_PLL_SECURITY_BIT_NO 31
-+#define GEN_CLK_PLL_SECURITY (1 << GEN_CLK_PLL_SECURITY_BIT_NO)
-+#define GEN_CLK_PLL_ENSAT (1 << 30)
-+#define GEN_CLK_PLL_FASTEN (1 << 29)
-+#define GEN_CLK_PLL_NR(v) (((v) - 1) << 23)
-+#define GEN_CLK_PLL_NF(v) (((v) - 1) << 11)
-+#define GEN_CLK_PLL_OD(v) (((v) - 1) << 8)
-+#define GEN_CLK_PLL_RESET (1 << 7)
-+#define GEN_CLK_PLL_BYPASS (1 << 6)
-+#define GEN_CLK_PLL_POWERDOWN (1 << 5)
-+#define GEN_CLK_PLL_SELECT (1 << 4)
-+
-+#define GEN_GET_CLK_PLL_NR(v) ((((v) >> 23) & 0x003f) + 1)
-+#define GEN_GET_CLK_PLL_NF(v) ((((v) >> 11) & 0x0fff) + 1)
-+#define GEN_GET_CLK_PLL_OD(v) ((((v) >> 8) & 0x7) + 1)
-+
-+
-+#define RESET_FLAG_DST_MEM_ERROR (1 << 18)
-+#define RESET_FLAG_SRC1_MEM_ERROR (1 << 17)
-+#define RESET_FLAG_WRITE_ADDR (1 << 16)
-+#define RESET_FLAG_DST_SYNC_ERROR (1 << 15)
-+#define RESET_FLAG_SRC1_SYNC_ERROR (1 << 14)
-+#define RESET_FLAG_DST_ALGN_ERROR (1 << 13)
-+#define RESET_FLAG_SRC1_ALGN_ERROR (1 << 12)
-+#define RESET_FLAG_DST_ADDR_ERROR (1 << 11)
-+#define RESET_FLAG_SRC1_ADDR_ERROR (1 << 10)
-+#define RESET_FLAG_ILLEGAL_INST (1 << 9)
-+#define RESET_FLAG_INST_SYNC_ERROR (1 << 8)
-+#define RESET_FLAG_INST_ADDR_ERROR (1 << 7)
-+#define RESET_FLAG_DATA_PORT_ERROR (1 << 6)
-+#define RESET_FLAG_INST_PORT_ERROR (1 << 5)
-+#define RESET_FLAG_SW_RESET (1 << 4)
-+#define RESET_FLAG_DEBUG (1 << 3)
-+#define RESET_FLAG_WATCHDOG (1 << 2)
-+#define RESET_FLAG_POWER_ON (1 << 1)
-+#define RESET_FLAG_EXTERNAL (1 << 0)
-+
-+/*
-+ * Timer block
-+ */
-+#define TIMER_BASE (OCP_BASE + OCP_TIMERS)
-+#define TIMER_MPTVAL 0x00
-+#define TIMER_RTCOM 0x04
-+#define TIMER_TKEY 0x08
-+#define TIMER_WDCOM 0x0c
-+#define TIMER_WDCFG 0x10
-+#define TIMER_SYSVAL 0x14
-+#define TIMER_SYSCOM(tmr) (0x18 + (tmr) * 4)
-+#define TIMER_TRN_CFG 0x100
-+#define TIMER_TRN 0x104
-+
-+#define TIMER_COUNT 10
-+#define TIMER_INT(tmr) INT_CHIP(1, (tmr))
-+#define TIMER_TKEYVAL 0xa1b2c3d4
-+#define TIMER_WATCHDOG_DISABLE 0x4d3c2b1a
-+#define TIMER_TRN_CFG_ENABLE_OSC 0x00000007
-+
-+#ifndef __ASSEMBLY__
-+/*
-+ * ubicom32_io_timer
-+ */
-+struct ubicom32_io_timer {
-+ volatile u32_t mptval;
-+ volatile u32_t rtcom;
-+ volatile u32_t tkey;
-+ volatile u32_t wdcom;
-+ volatile u32_t wdcfg;
-+ volatile u32_t sysval;
-+ volatile u32_t syscom[TIMER_COUNT];
-+ volatile u32_t reserved[64 - 6 - TIMER_COUNT]; // skip all the way to OCP-TRNG section
-+ volatile u32_t rsgcfg;
-+ volatile u32_t trn;
-+};
-+
-+#define UBICOM32_IO_TIMER ((struct ubicom32_io_timer *)TIMER_BASE)
-+#endif
-+
-+#define UBICOM32_VECTOR_TO_TIMER_INDEX(vector) (vector - TIMER_INT(0))
-+
-+/*
-+ * OCP-Debug Module (Mailbox)
-+ */
-+#define ISD_MAILBOX_BASE (OCP_BASE + OCP_DEBUG)
-+#define ISD_MAILBOX_IN 0x00
-+#define ISD_MAILBOX_OUT 0x04
-+#define ISD_MAILBOX_STATUS 0x08
-+
-+#define ISD_MAILBOX_INT INT_CHIP(1, 30)
-+
-+#define ISD_MAILBOX_STATUS_IN_FULL (1 << 31)
-+#define ISD_MAILBOX_STATUS_IN_EMPTY (1 << 30)
-+#define ISD_MAILBOX_STATUS_OUT_FULL (1 << 29)
-+#define ISD_MAILBOX_STATUS_OUT_EMPTY (1 << 28)
-+
-+/*
-+ * OCP-Security
-+ */
-+#define SECURITY_BASE (OCP_BASE + OCP_SECURITY)
-+#define SECURITY_BASE_EFFECTIVE_ADDRESS (SECURITY_BASE >> 7) // To load the base address in a single instruction
-+#define SECURITY_CTRL 0x00
-+#define SECURITY_CTRL_BYTE_OFFSET(x) ((x) << 16)
-+#define SECURITY_CTRL_KEY_SIZE(x) ((x) << 8)
-+#define SECURITY_CTRL_HASH_ALG_NONE (0 << 4)
-+#define SECURITY_CTRL_HASH_ALG_MD5 (1 << 4)
-+#define SECURITY_CTRL_HASH_ALG_SHA1 (2 << 4)
-+#define SECURITY_CTRL_CBC (1 << 3)
-+#define SECURITY_CTRL_CIPHER_ALG_AES (0 << 1)
-+#define SECURITY_CTRL_CIPHER_ALG_NONE (1 << 1)
-+#define SECURITY_CTRL_CIPHER_ALG_DES (2 << 1)
-+#define SECURITY_CTRL_CIPHER_ALG_3DES (3 << 1)
-+#define SECURITY_CTRL_ENCIPHER (1 << 0)
-+#define SECURITY_CTRL_DECIPHER (0 << 0)
-+#define SECURITY_STAT 0x04
-+#define SECURITY_STAT_BUSY (1 << 0)
-+#define SECURITY_KEY_VALUE(x) (0x10 + (x) * 4)
-+#define SECURITY_KEY_IN(x) (0x30 + (x) * 4)
-+#define SECURITY_KEY_OUT(x) (0x50 + (x) * 4)
-+#define SECURITY_KEY_HASH(x) (0x70 + (x) * 4)
-+
-+/*
-+ * OCP-ICCR
-+ */
-+#define ICCR_BASE (OCP_BASE + OCP_ICCR)
-+#define ICACHE_TOTAL_SIZE 16384 /* in bytes */
-+
-+/*
-+ * OCP-DCCR
-+ */
-+#define DCCR_BASE (OCP_BASE + OCP_DCCR)
-+#if defined(IP5000) || defined(IP5000_REV2)
-+#define DCACHE_TOTAL_SIZE 8192 /* in bytes */
-+#elif defined(IP7000) || defined(IP7000_REV2)
-+#define DCACHE_TOTAL_SIZE 16384 /* in bytes */
-+#endif
-+
-+#if defined(IP5000) || defined(IP5000_REV2) || defined(IP7000) || defined(IP7000_REV2)
-+#define DCACHE_WRITE_QUEUE_LENGTH 6
-+#else
-+#error "Unknown IP5K silicon"
-+#endif
-+
-+#define CACHE_LINE_SIZE 32 /* in bytes */
-+
-+#define CCR_ADDR 0x00
-+#define CCR_RDD 0x04
-+#define CCR_WRD 0x08
-+#define CCR_STAT 0x0c
-+#define CCR_CTRL 0x10
-+
-+#define CCR_STAT_MCBE 0
-+#define CCR_STAT_WIDEL 1 /* D-cache only */
-+
-+#define CCR_CTRL_DONE 0
-+#define CCR_CTRL_RESET 2
-+#define CCR_CTRL_VALID 3
-+#define CCR_CTRL_RD_DATA (1 << 4)
-+#define CCR_CTRL_RD_TAG (2 << 4)
-+#define CCR_CTRL_WR_DATA (3 << 4)
-+#define CCR_CTRL_WR_TAG (4 << 4)
-+#define CCR_CTRL_INV_INDEX (5 << 4)
-+#define CCR_CTRL_INV_ADDR (6 << 4)
-+#define CCR_CTRL_FLUSH_INDEX (7 << 4) /* D-cache only */
-+#define CCR_CTRL_FLUSH_INV_INDEX (8 << 4) /* D-cache only */
-+#define CCR_CTRL_FLUSH_ADDR (9 << 4) /* D-cache only */
-+#define CCR_CTRL_FLUSH_INV_ADDR (10 << 4) /* D-cache only */
-+
-+/*
-+ * OCP-OCMC
-+ */
-+#define OCMC_BASE (OCP_BASE + OCP_OCMC)
-+#define OCMC_BANK_MASK 0x00
-+#define OCMC_BIST_CNTL 0x04 /* IP5000 only */
-+#define OCMC_BIST_STAT 0x08 /* IP5000 only */
-+
-+#define OCMC_BANK_PROG(n) ((1<<(n))-1)
-+
-+#define OCMC_BIST_WRCK (1 << 7)
-+#define OCMC_BIST_RESET (1 << 5)
-+#define OCMC_BIST_SMART (1 << 4)
-+#define OCMC_BIST_RUN (1 << 3)
-+#define OCMC_BIST_REPAIR (1 << 2)
-+
-+#define OCMC_BIST_READY (1 << 3)
-+#define OCMC_BIST_FAIL (1 << 2)
-+
-+/*
-+ * OCP-STATISTICS
-+ */
-+#define STATISTICS_BASE (OCP_BASE + OCP_STATISTICS)
-+#define STAT_COUNTER_CTRL(n) ((n)*8)
-+#define STAT_COUNTER(n) ((n)*8 + 4)
-+
-+#define STAT_EVENT_MP_INST 0
-+#define STAT_EVENT_OCM_ACCESS 4
-+#define STAT_EVENT_OCM_REQ 5
-+#define STAT_EVENT_IC_REQ_INVAL 13
-+#define STAT_EVENT_IC_MISS_INVAL 14
-+#define STAT_EVENT_IC_REQ_INVAL_NACK 15
-+#define STAT_EVENT_IC_REQ_VAL 16
-+#define STAT_EVENT_IC_MISS_VAL 17
-+#define STAT_EVENT_IC_REQ_VAL_NACK 18
-+#define STAT_EVENT_IC_MISS_Q 19
-+#define STAT_EVENT_DC_RD_REQ 20
-+#define STAT_EVENT_DC_RD_MISS 21
-+#define STAT_EVENT_DC_WR_REQ 22
-+#define STAT_EVENT_DC_WR_MISS 23
-+#define STAT_EVENT_DC_MISS_Q 24
-+#define STAT_EVENT_DC_WB_FULL 25
-+#define STAT_EVENT_DC_REQ_NACK 26
-+#define STAT_EVENT_DC_CORE_REQ 27
-+#define STAT_EVENT_DC_MISS 28
-+#define STAT_EVENT_DC_EVICT 29
-+#define STAT_EVENT_TRUE 30
-+#define STAT_EVENT_FALSE 31
-+
-+/*
-+ * OCP_MTEST
-+ */
-+#define MTEST_BASE (OCP_BASE + OCP_MTEST)
-+#define MTEST_ADDR 0x00
-+#define MTEST_WR 0x04
-+#define MTEST_RD 0x08
-+#define MTEST_CTRL 0x0c
-+
-+/*
-+ * OCP_MCFG (IP7000 only)
-+ */
-+#define MCFG_BASE (OCP_BASE + OCP_MCFG)
-+#define MCFG_CTRL 0x00
-+#define MCFG_WCFG 0x04
-+#define MCFG_RCFG 0x08
-+
-+/*
-+ * Port registers
-+ */
-+#define IO_BASE 0x02000000
-+#define RA (IO_BASE + 0x00000000)
-+#define RB (IO_BASE + 0x00001000)
-+#define RC (IO_BASE + 0x00002000)
-+#define RD (IO_BASE + 0x00003000)
-+#define RE (IO_BASE + 0x00004000)
-+#define RF (IO_BASE + 0x00005000)
-+#define RG (IO_BASE + 0x00006000)
-+#define RH (IO_BASE + 0x00007000)
-+#define RI (IO_BASE + 0x00008000)
-+#define RJ (IO_BASE + 0x00009000)
-+#define RLATCH (IO_BASE + 0x00ff0000) // For latched output only
-+#define IO_PORT_BR_OFFSET 0x00000800
-+
-+/*
-+ * General I/O Register Map (per port)
-+ */
-+#define IO_FUNC 0x00
-+#define IO_GPIO_CTL 0x04
-+#define IO_GPIO_OUT 0x08
-+#define IO_GPIO_IN 0x0C
-+#define IO_INT_STATUS 0x10
-+#define IO_INT_MASK 0x14
-+#define IO_INT_SET 0x18
-+#define IO_INT_CLR 0x1C
-+#define IO_TX_FIFO 0x20
-+#define IO_TX_FIFO_HI 0x24
-+#define IO_RX_FIFO 0x28
-+#define IO_RX_FIFO_HI 0x2c
-+#define IO_CTL0 0x30
-+#define IO_CTL1 0x34
-+#define IO_CTL2 0x38
-+#define IO_STATUS0 0x3c
-+#define IO_STATUS1 0x40
-+#define IO_STATUS2 0x44
-+#define IO_FIFO_WATER 0x48
-+#define IO_FIFO_LEVEL 0x4c
-+#define IO_GPIO_MASK 0x50
-+
-+#define IO_FUNC_FUNCTION_RESET(func) ((1 << ((func) - 1)) << 4) /* Function 0 doesn't need reset */
-+#define IO_FUNC_RX_FIFO (1 << 3)
-+#define IO_FUNC_SELECT(func) ((func) << 0)
-+
-+/*
-+ * External interrupt pins.
-+ */
-+#define EXT_INT_IO_BIT(pin) ((pin) + 5) // Interrupt pin number -> I/O INT bit
-+#define EXT_INT_RISING_EDGE(pin) (0x2 << (2*(pin) + 7))
-+#define EXT_INT_FALLING_EDGE(pin) (0x1 << (2*(pin) + 7))
-+
-+/*
-+ * Flash
-+ */
-+#define IO_XFL_BASE RA
-+
-+#define IO_XFL_INT_START (1 << 16)
-+#define IO_XFL_INT_ERR (1 << 8)
-+#define IO_XFL_INT_DONE (1 << 0)
-+
-+#define IO_XFL_CTL0_MASK (0xffe07fff)
-+#define IO_XFL_CTL0_RD_CMD(cmd) (((cmd) & 0xff) << 24)
-+#define IO_XFL_CTL0_RD_DUMMY(n) (((n) & 0x7) << 21)
-+#define IO_XFL_CTL0_CLK_WIDTH(core_cycles) ((((core_cycles) + 1) & 0x7e) << 8) /* must be even number */
-+#define IO_XFL_CTL0_CE_WAIT(spi_cycles) (((spi_cycles) & 0x3f) << 2)
-+#define IO_XFL_CTL0_MCB_LOCK (1 << 1)
-+#define IO_XFL_CTL0_ENABLE (1 << 0)
-+#define IO_XFL_CTL0_FAST_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(0xb) | IO_XFL_CTL0_RD_DUMMY(1) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
-+#define IO_XFL_CTL0_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(3) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
-+
-+#define IO_XFL_CTL1_MASK (0xc0003fff)
-+#define IO_XFL_CTL1_FC_INST(inst) (((inst) & 0x3) << 30)
-+#define IO_XFL_CTL1_FC_DATA(n) (((n) & 0x3ff) << 4)
-+#define IO_XFL_CTL1_FC_DUMMY(n) (((n) & 0x7) << 1)
-+#define IO_XFL_CTL1_FC_ADDR (1 << 0)
-+
-+#define IO_XFL_CTL2_FC_CMD(cmd) (((cmd) & 0xff) << 24)
-+#define IO_XFL_CTL2_FC_ADDR(addr) ((addr) & 0x00ffffff) /* Only up to 24 bits */
-+
-+#define IO_XFL_STATUS0_MCB_ACTIVE (1 << 0)
-+#define IO_XFL_STATUS0_IOPCS_ACTIVE (1 << 1)
-+
-+/*
-+ * SDRAM
-+ */
-+#define IO_SDRAM_DATA_BASE RG
-+#define IO_SDRAM_CNTL_BASE RH
-+
-+#define IO_SDRAM_CTRL0_EN_REF (1 << 0)
-+
-+/*
-+ * Port function code (common fucntion codes for all I/O ports)
-+ */
-+#define IO_PORTX_FUNC_GPIO 0x00
-+#define IO_PORTX_FUNC_XFL 0x01
-+#define IO_PORTX_FUNC_PCI 0x01
-+#define IO_PORTX_FUNC_SERDES 0x01
-+#define IO_PORTX_FUNC_GMII 0x01
-+#define IO_PORTX_FUNC_DDR 0x01
-+#define IO_PORTX_FUNC_PCIX 0x01
-+#define IO_PORTX_FUNC_USB2_0 0x01
-+#define IO_PORTX_FUNC_GPIO_INT_CLK 0x02
-+#define IO_PORTX_FUNC_PLIO 0x02
-+#define IO_PORTX_FUNC_GPIO_INT 0x03
-+#define IO_PORTX_FUNC_MII 0x03
-+
-+/*
-+ * Port 0
-+ */
-+#define IO_PORT0_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT0_FUNC_XFL_INT_CLK IO_PORTX_FUNC_XFL // Default mode after reset
-+#define IO_PORT0_FUNC_GPIO_INT_CLK IO_PORTX_FUNC_GPIO_INT_CLK
-+#define IO_PORT0_FUNC_GPIO_INT IO_PORTX_FUNC_GPIO_INT
-+
-+/*
-+ * Port 1
-+ */
-+#define IO_PORT1_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT1_FUNC_PCI IO_PORTX_FUNC_PCI // PCI control
-+#define IO_PORT1_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
-+
-+/*
-+ * Port 2
-+ */
-+#define IO_PORT2_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT2_FUNC_PCI IO_PORTX_FUNC_PCI // PCI data I/O
-+#define IO_PORT2_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
-+
-+/*
-+ * Port 3
-+ */
-+#define IO_PORT3_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT3_FUNC_SERDES IO_PORTX_FUNC_SERDES
-+#define IO_PORT3_FUNC_PLIO IO_PORTX_FUNC_PLIO
-+
-+/*
-+ * Port 4
-+ */
-+#define IO_PORT4_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT4_FUNC_SERDES IO_PORTX_FUNC_SERDES
-+#define IO_PORT4_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
-+#define IO_PORT4_FUNC_MII IO_PORTX_FUNC_MII
-+
-+/*
-+ * Port 5
-+ */
-+#define IO_PORT5_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT5_FUNC_GMII IO_PORTX_FUNC_GMII
-+
-+/*
-+ * Port 6
-+ */
-+#define IO_PORT6_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT6_FUNC_DDR IO_PORTX_FUNC_DDR
-+
-+/*
-+ * Port 7
-+ */
-+#define IO_PORT7_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT7_FUNC_DDR IO_PORTX_FUNC_DDR
-+
-+/*
-+ * Port 8
-+ */
-+#define IO_PORT8_FUNC_GPIO IO_PORTX_FUNC_GPIO
-+#define IO_PORT8_FUNC_PCIX IO_PORTX_FUNC_PCIX
-+#define IO_PORT8_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
-+#define IO_PORT8_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
-+
-+/*
-+ * Port 9
-+ */
-+#define IO_PORT9_FUNC_USB2_0 IO_PORTX_FUNC_USB2_0
-+
-+/*
-+ * FIFO
-+ */
-+#define IO_PORTX_INT_FIFO_TX_RESET (1 << 31)
-+#define IO_PORTX_INT_FIFO_RX_RESET (1 << 30)
-+#define IO_PORTX_INT_FIFO_TX_UF (1 << 15)
-+#define IO_PORTX_INT_FIFO_TX_WM (1 << 14)
-+#define IO_PORTX_INT_FIFO_RX_OF (1 << 13)
-+#define IO_PORTX_INT_FIFO_RX_WM (1 << 12)
-+
-+#define IO_PORTX_FUNC_FIFO_TX_WM(n) ((n) << 16)
-+#define IO_PORTX_FUNC_FIFO_RX_WM(n) ((n) << 0)
-+
-+/*
-+ * MII
-+ */
-+#define IO_PORTX_INT_MII_TX_ERR_SEND (1 << 18)
-+#define IO_PORTX_INT_MII_TX_HALT (1 << 17)
-+#define IO_PORTX_INT_MII_TX_START (1 << 16)
-+#define IO_PORTX_INT_MII_THRESHOLD (1 << 8)
-+#define IO_PORTX_INT_MII_RX_EOP (1 << 7)
-+#define IO_PORTX_INT_MII_RX_SFD (1 << 6)
-+#define IO_PORTX_INT_MII_RX_ERR (1 << 5)
-+#define IO_PORTX_INT_MII_TX_EOP (1 << 4)
-+#define IO_PORTX_INT_MII_COL (1 << 3)
-+#define IO_PORTX_INT_MII_CRS (1 << 2)
-+#define IO_PORTX_INT_MII_ODD_NIB_ERR (1 << 1)
-+#define IO_PORTX_INT_MII_FALSE_CARRIER (1 << 0)
-+
-+/*
-+ * SerDes
-+ */
-+#define IO_PORTX_INT_SERDES_TXBUF_VALID (1 << 16)
-+#define IO_PORTX_INT_SERDES_RXERR (1 << 7)
-+#define IO_PORTX_INT_SERDES_RXEOP (1 << 6)
-+#define IO_PORTX_INT_SERDES_SYND (1 << 5)
-+#define IO_PORTX_INT_SERDES_TXBE (1 << 4)
-+#define IO_PORTX_INT_SERDES_TXEOP (1 << 3)
-+#define IO_PORTX_INT_SERDES_SXLP (1 << 2)
-+#define IO_PORTX_INT_SERDES_RXBF (1 << 1)
-+#define IO_PORTX_INT_SERDES_RXCRS (1 << 0)
-+
-+#ifndef __ASSEMBLY__
-+struct ubicom32_io_port {
-+ volatile u32_t function;
-+ volatile u32_t gpio_ctl;
-+ volatile u32_t gpio_out;
-+ volatile u32_t gpio_in;
-+ volatile u32_t int_status;
-+ volatile u32_t int_mask;
-+ volatile u32_t int_set;
-+ volatile u32_t int_clr;
-+ volatile u32_t tx_fifo;
-+ volatile u32_t tx_fifo_hi;
-+ volatile u32_t rx_fifo;
-+ volatile u32_t rx_fifo_hi;
-+ volatile u32_t ctl0;
-+ volatile u32_t ctl1;
-+ volatile u32_t ctl2;
-+ volatile u32_t status0;
-+ volatile u32_t status1;
-+ volatile u32_t status2;
-+ volatile u32_t fifo_watermark;
-+ volatile u32_t fifo_level;
-+ volatile u32_t gpio_mask;
-+};
-+
-+#define UBICOM32_IO_PORT(port) ((struct ubicom32_io_port *)((port)))
-+#endif
-+
-+#ifndef __ASSEMBLY__
-+/*
-+ * ubicom32_set_interrupt()
-+ */
-+extern inline void ubicom32_set_interrupt(u8_t interrupt)
-+{
-+ u32_t ibit = INT_BIT_MASK(interrupt);
-+
-+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
-+ asm volatile (
-+ "move.4 "D(INT_SET(INT_CHIP(0, 0)))", %0\n\t"
-+ :
-+ : "r" (ibit)
-+ );
-+
-+ return;
-+ }
-+
-+ asm volatile (
-+ "move.4 "D(INT_SET(INT_CHIP(1, 0)))", %0\n\t"
-+ :
-+ : "r" (ibit)
-+ );
-+}
-+
-+/*
-+ * ubicom32_clear_interrupt()
-+ */
-+extern inline void ubicom32_clear_interrupt(u8_t interrupt)
-+{
-+ u32_t ibit = INT_BIT_MASK(interrupt);
-+
-+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
-+ asm volatile (
-+ "move.4 "D(INT_CLR(INT_CHIP(0, 0)))", %0\n\t"
-+ :
-+ : "r" (ibit)
-+ );
-+
-+ return;
-+ }
-+
-+ asm volatile (
-+ "move.4 "D(INT_CLR(INT_CHIP(1, 0)))", %0\n\t"
-+ :
-+ : "r" (ibit)
-+ );
-+}
-+
-+/*
-+ * ubicom32_enable_interrupt()
-+ */
-+extern inline void ubicom32_enable_interrupt(u8_t interrupt)
-+{
-+ u32_t ibit = INT_BIT_MASK(interrupt);
-+
-+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
-+ asm volatile (
-+ "or.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
-+ :
-+ : "d" (ibit)
-+ );
-+
-+ return;
-+ }
-+
-+ asm volatile (
-+ "or.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
-+ :
-+ : "d" (ibit)
-+ );
-+}
-+
-+/*
-+ * ubicom32_disable_interrupt()
-+ */
-+extern inline void ubicom32_disable_interrupt(u8_t interrupt)
-+{
-+ u32_t ibit = ~INT_BIT_MASK(interrupt);
-+
-+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
-+ asm volatile (
-+ "and.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
-+ :
-+ : "d" (ibit)
-+ );
-+
-+ return;
-+ }
-+
-+ asm volatile (
-+ "and.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
-+ :
-+ : "d" (ibit)
-+ );
-+}
-+
-+/*
-+ * ubicom32_enable_global_interrupts()
-+ */
-+extern inline void ubicom32_enable_global_interrupts(void)
-+{
-+ asm volatile(
-+ "bset GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
-+ );
-+}
-+
-+/*
-+ * ubicom32_disable_global_interrupts()
-+ */
-+extern inline void ubicom32_disable_global_interrupts(void)
-+{
-+ asm volatile(
-+ "bclr GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
-+ );
-+}
-+
-+/*
-+ * ubicom32_get_reset_reason()
-+ */
-+extern inline u32_t ubicom32_get_reset_reason(void)
-+{
-+ return *(u32_t *)(GENERAL_CFG_BASE + GEN_RESET_REASON);
-+}
-+
-+/*
-+ * ubicom32_read_reg()
-+ */
-+extern inline u32_t ubicom32_read_reg(volatile void *reg)
-+{
-+ u32_t v;
-+ asm volatile (
-+ "move.4 %[dest], %[src] \n\t"
-+ : [dest] "=r" (v)
-+ : [src] "m" (*(u32_t *)reg)
-+ );
-+ return v;
-+}
-+
-+/*
-+ * ubicom32_write_reg()
-+ */
-+extern inline void ubicom32_write_reg(volatile void *reg, u32_t v)
-+{
-+ asm volatile (
-+ "move.4 %[dest], %[src] \n\t"
-+ :
-+ : [src] "r" (v), [dest] "m" (*(u32_t *)reg)
-+ );
-+}
-+
-+#endif /* __ASSEMBLY__ */
-+#endif /* _ASM_UBICOM32_IP5000_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ipcbuf.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ipcbuf.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ipcbuf.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ipcbuf.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,55 @@
-+/*
-+ * arch/ubicom32/include/asm/ipcbuf.h
-+ * Definition of ipc64_perm struct for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IPCBUF_H
-+#define _ASM_UBICOM32_IPCBUF_H
-+
-+/*
-+ * The user_ipc_perm structure for m68k architecture.
-+ * Note extra padding because this structure is passed back and forth
-+ * between kernel and user space.
-+ *
-+ * Pad space is left for:
-+ * - 32-bit mode_t and seq
-+ * - 2 miscellaneous 32-bit values
-+ */
-+struct ipc64_perm
-+{
-+ __kernel_key_t key;
-+ __kernel_uid32_t uid;
-+ __kernel_gid32_t gid;
-+ __kernel_uid32_t cuid;
-+ __kernel_gid32_t cgid;
-+ __kernel_mode_t mode;
-+ unsigned short __pad1;
-+ unsigned short seq;
-+ unsigned short __pad2;
-+ unsigned long __unused1;
-+ unsigned long __unused2;
-+};
-+
-+#endif /* _ASM_UBICOM32_IPCBUF_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/irqflags.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/irqflags.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/irqflags.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/irqflags.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,96 @@
-+/*
-+ * arch/ubicom32/include/asm/irqflags.h
-+ * Raw implementation of local IRQ functions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IRQFLAGS_H
-+#define _ASM_UBICOM32_IRQFLAGS_H
-+
-+#include <linux/thread_info.h>
-+#include <asm/ubicom32-common.h>
-+#if defined(CONFIG_SMP)
-+#include <asm/smp.h>
-+#endif
-+#include <asm/ldsr.h>
-+
-+#if defined(CONFIG_PREEMPT)
-+#error Not supported by Ubicom32 irq handling, yet!
-+#endif
-+
-+/*
-+ * raw_local_irq_enable()
-+ * Enable interrupts for this thread.
-+ */
-+static inline void raw_local_irq_enable(void)
-+{
-+ ldsr_local_irq_enable();
-+}
-+
-+/*
-+ * raw_local_irq_disable()
-+ * Disable interrupts for this thread.
-+ */
-+static inline void raw_local_irq_disable(void)
-+{
-+ ldsr_local_irq_disable();
-+}
-+
-+/*
-+ * raw_local_save_flags()
-+ * Get the current IRQ state.
-+ */
-+#define raw_local_save_flags(flags) \
-+do { \
-+ (flags) = ldsr_local_irq_is_disabled(); \
-+} while (0)
-+
-+/*
-+ * raw_local_irq_save()
-+ * Save the current interrupt state and disable interrupts.
-+ */
-+#define raw_local_irq_save(flags) \
-+do { \
-+ (flags) = ldsr_local_irq_save(); \
-+} while (0)
-+
-+/*
-+ * raw_local_irq_restore()
-+ * Restore the IRQ state back to flags.
-+ */
-+static inline void raw_local_irq_restore(unsigned long flags)
-+{
-+ ldsr_local_irq_restore(flags);
-+}
-+
-+/*
-+ * raw_irqs_disabled_flags()
-+ * Return true if the flags indicate that IRQ(s) are disabled.
-+ */
-+static inline int raw_irqs_disabled_flags(unsigned long flags)
-+{
-+ return (flags);
-+}
-+
-+#endif /* _ASM_UBICOM32_IRQFLAGS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/irq.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/irq.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/irq.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/irq.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,45 @@
-+/*
-+ * arch/ubicom32/include/asm/irq.h
-+ * IRQ definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IRQ_H
-+#define _ASM_UBICOM32_IRQ_H
-+
-+#include <asm/irqflags.h>
-+
-+/*
-+ * We setup the IRQS to cover the full range of interrupt registers in
-+ * processor.
-+ */
-+#define NR_IRQS 64
-+
-+#define irq_canonicalize(irq) (irq)
-+
-+extern int irq_soft_alloc(unsigned int *soft);
-+extern void ack_bad_irq(unsigned int irq);
-+extern void do_IRQ(int irq, struct pt_regs *fp);
-+
-+#endif /* _ASM_UBICOM32_IRQ_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/irq_regs.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/irq_regs.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/irq_regs.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/irq_regs.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/irq_regs.h
-+ * Generic irq_regs.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_IRQ_REGS_H
-+#define _ASM_UBICOM32_IRQ_REGS_H
-+
-+#include <asm-generic/irq_regs.h>
-+
-+#endif /* _ASM_UBICOM32_IRQ_REGS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/Kbuild linux-2.6.30.10-ubi/arch/ubicom32/include/asm/Kbuild
---- linux-2.6.30.10/arch/ubicom32/include/asm/Kbuild 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/Kbuild 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1 @@
-+include include/asm-generic/Kbuild.asm
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/kdebug.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/kdebug.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/kdebug.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/kdebug.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/kdebug.h
-+ * Generic kdebug.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_KDEBUG_H
-+#define _ASM_UBICOM32_KDEBUG_H
-+
-+#include <asm-generic/kdebug.h>
-+
-+#endif /* _ASM_UBICOM32_KDEBUG_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/kmap_types.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/kmap_types.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/kmap_types.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/kmap_types.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,48 @@
-+/*
-+ * arch/ubicom32/include/asm/kmap_types.h
-+ * Definition of km_type's for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_KMAP_TYPES_H
-+#define _ASM_UBICOM32_KMAP_TYPES_H
-+
-+enum km_type {
-+ KM_BOUNCE_READ,
-+ KM_SKB_SUNRPC_DATA,
-+ KM_SKB_DATA_SOFTIRQ,
-+ KM_USER0,
-+ KM_USER1,
-+ KM_BIO_SRC_IRQ,
-+ KM_BIO_DST_IRQ,
-+ KM_PTE0,
-+ KM_PTE1,
-+ KM_IRQ0,
-+ KM_IRQ1,
-+ KM_SOFTIRQ0,
-+ KM_SOFTIRQ1,
-+ KM_TYPE_NR
-+};
-+
-+#endif /* _ASM_UBICOM32_KMAP_TYPES_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ldsr.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ldsr.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ldsr.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ldsr.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,186 @@
-+/*
-+ * arch/ubicom32/include/asm/ldsr.h
-+ * Ubicom32 LDSR interface definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_LDSR_H
-+#define _ASM_UBICOM32_LDSR_H
-+
-+#include <asm/ubicom32-common.h>
-+#include <asm/types.h>
-+#include <asm/thread.h>
-+
-+extern unsigned int ldsr_soft_irq_mask;
-+
-+/*
-+ * ldsr_local_irq_is_disabled()
-+ * Test if interrupts are disabled for this thread?
-+ */
-+static inline int ldsr_local_irq_is_disabled(void)
-+{
-+ int ret;
-+ thread_t self = thread_get_self();
-+ unsigned int mask = (1 << self);
-+
-+ asm volatile (
-+ " and.4 %0, scratchpad1, %1 \n\t"
-+ : "=r" (ret)
-+ : "d" (mask)
-+ : "cc"
-+ );
-+
-+ /*
-+ * We return a simple 1 == disabled, 0 == enabled
-+ * losing which tid this is for, because Linux
-+ * can restore interrupts on a different thread.
-+ */
-+ return ret >> self;
-+}
-+
-+/*
-+ * ldsr_local_irq_save()
-+ * Get the current interrupt state and disable interrupts.
-+ */
-+static inline unsigned int ldsr_local_irq_save(void)
-+{
-+ int ret;
-+ thread_t self = thread_get_self();
-+ unsigned int mask = (1 << self);
-+
-+ /*
-+ * Ensure the compiler can not optimize out the code
-+ * (volatile) and that it does not "cache" values around
-+ * the interrupt state change (memory). This ensures
-+ * that interrupt changes are treated as a critical
-+ * section.
-+ */
-+ asm volatile (
-+ " and.4 %0, scratchpad1, %1 \n\t"
-+ " or.4 scratchpad1, scratchpad1, %1 \n\t"
-+ : "=&r" (ret)
-+ : "d" (mask)
-+ : "cc", "memory"
-+ );
-+
-+ /*
-+ * We return a simple 1 == disabled, 0 == enabled
-+ * losing which tid this is for, because Linux
-+ * can restore interrupts on a different thread.
-+ */
-+ return ret >> self;
-+}
-+
-+/*
-+ * ldsr_local_irq_restore()
-+ * Restore this cpu's interrupt enable/disable state.
-+ *
-+ * Note: flags is either 0 or 1.
-+ */
-+static inline void ldsr_local_irq_restore(unsigned int flags)
-+{
-+ unsigned int temp;
-+ thread_t self = thread_get_self();
-+ unsigned int mask = (1 << self);
-+ flags = (flags << self);
-+
-+ /*
-+ * Ensure the compiler can not optimize out the code
-+ * (volatile) and that it does not "cache" values around
-+ * the interrupt state change (memory). This ensures
-+ * that interrupt changes are treated as a critical
-+ * section.
-+ *
-+ * Atomic change to our bit in scratchpad1 without
-+ * causing any temporary glitch in the value and
-+ * without effecting other values. Also this uses
-+ * no branches so no penalties.
-+ */
-+ asm volatile (
-+ " xor.4 %0, scratchpad1, %1 \n\t"
-+ " and.4 %0, %2, %0 \n\t"
-+ " xor.4 scratchpad1, scratchpad1, %0 \n\t"
-+ " move.4 int_set0, %3 \n\t"
-+ : "=&d"(temp)
-+ : "d"(flags), "r"(mask), "r"(ldsr_soft_irq_mask)
-+ : "cc", "memory"
-+ );
-+}
-+
-+/*
-+ * ldsr_local_irq_disable_interrupt()
-+ * Disable ints for this thread.
-+ */
-+static inline void ldsr_local_irq_disable(void)
-+{
-+ unsigned int mask = (1 << thread_get_self());
-+
-+ /*
-+ * Ensure the compiler can not optimize out the code
-+ * (volatile) and that it does not "cache" values around
-+ * the interrupt state change (memory). This ensures
-+ * that interrupt changes are treated as a critical
-+ * section.
-+ */
-+ asm volatile (
-+ " or.4 scratchpad1, scratchpad1, %0 \n\t"
-+ :
-+ : "d" (mask)
-+ : "cc", "memory"
-+ );
-+}
-+
-+/*
-+ * ldsr_local_irq_enable_interrupt
-+ * Enable ints for this thread.
-+ */
-+static inline void ldsr_local_irq_enable(void)
-+{
-+ unsigned int mask = (1 << thread_get_self());
-+
-+ /*
-+ * Ensure the compiler can not optimize out the code
-+ * (volatile) and that it does not "cache" values around
-+ * the interrupt state change (memory). This ensures
-+ * that interrupt changes are treated as a critical
-+ * section.
-+ */
-+ asm volatile (
-+ " and.4 scratchpad1, scratchpad1, %0 \n\t"
-+ " move.4 int_set0, %1 \n\t"
-+ :
-+ : "d" (~mask), "r" (ldsr_soft_irq_mask)
-+ : "cc", "memory"
-+ );
-+}
-+
-+extern void ldsr_init(void);
-+extern void ldsr_set_trap_irq(unsigned int irq);
-+extern void ldsr_mask_vector(unsigned int vector);
-+extern void ldsr_unmask_vector(unsigned int vector);
-+extern void ldsr_enable_vector(unsigned int vector);
-+extern void ldsr_disable_vector(unsigned int vector);
-+extern thread_t ldsr_get_threadid(void);
-+
-+#endif /* _ASM_UBICOM32_LDSR_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/linkage.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/linkage.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/linkage.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/linkage.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * arch/ubicom32/include/asm/linkage.h
-+ * Definition of Ubicom32 architecture specific linkage types.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_LINKAGE_H
-+#define _ASM_UBICOM32_LINKAGE_H
-+
-+#define __ocm_text __section(.ocm_text)
-+#define __ocm_data __section(.ocm_data)
-+
-+#endif /* _ASM_UBICOM32_LINKAGE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/local.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/local.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/local.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/local.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/local.h
-+ * Generic local.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_LOCAL_H
-+#define _ASM_UBICOM32_LOCAL_H
-+
-+#include <asm-generic/local.h>
-+
-+#endif /* _ASM_UBICOM32_LOCAL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/machdep.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/machdep.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/machdep.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/machdep.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,43 @@
-+/*
-+ * arch/ubicom32/include/asm/machdep.h
-+ * Machine dependent utility routines.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_MACHDEP_H
-+#define _ASM_UBICOM32_MACHDEP_H
-+
-+#include <linux/interrupt.h>
-+
-+/* Hardware clock functions */
-+extern unsigned long hw_timer_offset(void);
-+
-+/* machine dependent power off functions */
-+extern void (*mach_reset)(void);
-+extern void (*mach_halt)(void);
-+extern void (*mach_power_off)(void);
-+
-+extern void config_BSP(char *command, int len);
-+
-+#endif /* _ASM_UBICOM32_MACHDEP_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/mc146818rtc.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mc146818rtc.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/mc146818rtc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mc146818rtc.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/ubicom32/include/asm/mc146818rtc.h
-+ * Generic mc146818rtc.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ * Machine dependent access functions for RTC registers.
-+ */
-+#ifndef _ASM_UBICOM32_MC146818RTC_H
-+#define _ASM_UBICOM32_MC146818RTC_H
-+
-+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-+
-+#endif /* _ASM_UBICOM32_MC146818RTC_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/memory_map.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/memory_map.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/memory_map.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/memory_map.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,66 @@
-+/*
-+ * arch/ubicom32/include/asm/memory_map.h
-+ * Machine memory maps/
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_MEMORY_MAP_H
-+#define _ASM_UBICOM32_MEMORY_MAP_H
-+
-+/*
-+ * Memory Size
-+ */
-+#define OCM_SECTOR_SIZE 0x00008000 /* 32K */
-+
-+#if defined(CONFIG_UBICOM32_V3)
-+#define OCMSIZE 0x00030000 /* 192K on-chip RAM for both program and data */
-+#elif defined(CONFIG_UBICOM32_V4)
-+#define OCMSIZE 0x0003C000 /* 240K on-chip RAM for both program and data */
-+#else
-+#error "Unknown IP5K silicon"
-+#endif
-+
-+#define OCMSTART 0x3ffc0000 /* alias from 0x03000000 for easy
-+ * jump to/from SDRAM */
-+#define OCMEND (OCMSTART + OCMSIZE)
-+
-+#define SDRAMSTART 0x40000000
-+
-+#define KERNELSTART (SDRAMSTART + 0x00400000)
-+
-+#define FLASHSTART 0x60000000
-+
-+/*
-+ * CODELOADER / OS_SYSCALL OCM Reservations
-+ * Don't change these unless you know what you are doing.
-+ */
-+#define CODELOADER_SIZE 0x30
-+#define CODELOADER_BEGIN OCMSTART /* Must be OCM start for gdb to work. */
-+#define CODELOADER_END (CODELOADER_BEGIN + CODELOADER_SIZE)
-+
-+#define OS_SYSCALL_BEGIN CODELOADER_END /* system_call at this address */
-+#define OS_SYSCALL_SIZE (512 - CODELOADER_SIZE)
-+#define OS_SYSCALL_END (OS_SYSCALL_BEGIN + OS_SYSCALL_SIZE)
-+
-+#endif /* _ASM_UBICOM32_MEMORY_MAP_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/mman.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mman.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/mman.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mman.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,44 @@
-+/*
-+ * arch/ubicom32/include/asm/mman.h
-+ * Memory mapping definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_MMAN_H
-+#define _ASM_UBICOM32_MMAN_H
-+
-+#include <asm-generic/mman.h>
-+
-+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-+#define MAP_LOCKED 0x2000 /* pages are locked */
-+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-+
-+#define MCL_CURRENT 1 /* lock all current mappings */
-+#define MCL_FUTURE 2 /* lock all future mappings */
-+
-+#endif /* _ASM_UBICOM32_MMAN_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/mmu_context.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mmu_context.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/mmu_context.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mmu_context.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,60 @@
-+/*
-+ * arch/ubicom32/include/asm/mmu_context.h
-+ * MMU context definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_MMU_CONTEXT_H
-+#define _ASM_UBICOM32_MMU_CONTEXT_H
-+
-+#include <asm/setup.h>
-+#include <asm/page.h>
-+#include <asm/pgalloc.h>
-+
-+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-+{
-+}
-+
-+extern inline int
-+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-+{
-+ // mm->context = virt_to_phys(mm->pgd);
-+ return(0);
-+}
-+
-+#define destroy_context(mm) do { } while(0)
-+
-+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-+{
-+}
-+
-+#define deactivate_mm(tsk,mm) do { } while (0)
-+
-+extern inline void activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-+{
-+}
-+
-+#endif /* _ASM_UBICOM32_MMU_CONTEXT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/mmu.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mmu.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/mmu.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mmu.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,41 @@
-+/*
-+ * arch/ubicom32/include/asm/mmu.h
-+ * Definition of mm_context_t struct for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2002, David McCullough <davidm@snapgear.com>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_MMU_H
-+#define _ASM_UBICOM32_MMU_H
-+
-+typedef struct {
-+ struct vm_list_struct *vmlist;
-+ unsigned long end_brk;
-+#ifdef CONFIG_BINFMT_ELF_FDPIC
-+ unsigned long exec_fdpic_loadmap;
-+ unsigned long interp_fdpic_loadmap;
-+#endif
-+} mm_context_t;
-+
-+#endif /* _ASM_UBICOM32_MMU_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/module.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/module.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/module.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/module.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,48 @@
-+/*
-+ * arch/ubicom32/include/asm/module.h
-+ * Ubicom32 architecture specific module definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_MODULE_H
-+#define _ASM_UBICOM32_MODULE_H
-+
-+struct mod_arch_specific {
-+ void *ocm_inst;
-+ int ocm_inst_size;
-+};
-+
-+#define Elf_Shdr Elf32_Shdr
-+#define Elf_Sym Elf32_Sym
-+#define Elf_Ehdr Elf32_Ehdr
-+
-+#define ARCH_PROC_MODULES_EXTRA(m,mod) \
-+ seq_printf(m, " OCM(%d bytes @ 0x%p)", \
-+ (mod)->arch.ocm_inst_size, (mod)->arch.ocm_inst)
-+
-+#define ARCH_OOPS_MODULE_EXTRA(mod) \
-+ printk(KERN_INFO "%p %u OCM(%p %u)\n", \
-+ (mod)->module_core, (mod)->core_size, \
-+ (mod)->arch.ocm_inst, (mod)->arch.ocm_inst_size)
-+#endif /* _ASM_UBICOM32_MODULE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/msgbuf.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/msgbuf.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/msgbuf.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/msgbuf.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,58 @@
-+/*
-+ * arch/ubicom32/include/asm/msgbuf.h
-+ * Definition of msqid64_ds struct for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_MSGBUF_H
-+#define _ASM_UBICOM32_MSGBUF_H
-+
-+/*
-+ * The msqid64_ds structure for ubicom32 architecture.
-+ * Note extra padding because this structure is passed back and forth
-+ * between kernel and user space.
-+ *
-+ * Pad space is left for:
-+ * - 64-bit time_t to solve y2038 problem
-+ * - 2 miscellaneous 32-bit values
-+ */
-+
-+struct msqid64_ds {
-+ struct ipc64_perm msg_perm;
-+ __kernel_time_t msg_stime; /* last msgsnd time */
-+ unsigned long __unused1;
-+ __kernel_time_t msg_rtime; /* last msgrcv time */
-+ unsigned long __unused2;
-+ __kernel_time_t msg_ctime; /* last change time */
-+ unsigned long __unused3;
-+ unsigned long msg_cbytes; /* current number of bytes on queue */
-+ unsigned long msg_qnum; /* number of messages in queue */
-+ unsigned long msg_qbytes; /* max number of bytes on queue */
-+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
-+ __kernel_pid_t msg_lrpid; /* last receive pid */
-+ unsigned long __unused4;
-+ unsigned long __unused5;
-+};
-+
-+#endif /* _ASM_UBICOM32_MSGBUF_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/mutex.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mutex.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/mutex.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/mutex.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,41 @@
-+/*
-+ * arch/ubicom32/include/asm/mutex.h
-+ * Generic mutex.h for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ * Pull in the generic implementation for the mutex fastpath.
-+ *
-+ * TODO: implement optimized primitives instead, or leave the generic
-+ * implementation in place, or pick the atomic_xchg() based generic
-+ * implementation. (see asm-generic/mutex-xchg.h for details)
-+ */
-+
-+#ifndef _ASM_UBICOM32_MUTEX_H
-+#define _ASM_UBICOM32_MUTEX_H
-+
-+#include <asm-generic/mutex-dec.h>
-+
-+#endif /* _ASM_UBICOM32_MUTEX_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/namei.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/namei.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/namei.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/namei.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/ubicom32/include/asm/namei.h
-+ * Definition of __emul_prefix() for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_NAMEI_H
-+#define _ASM_UBICOM32_NAMEI_H
-+
-+/* This dummy routine maybe changed to something useful
-+ * for /usr/gnemul/ emulation stuff.
-+ * Look at asm-sparc/namei.h for details.
-+ */
-+
-+#define __emul_prefix() NULL
-+
-+#endif /* _ASM_UBICOM32_NAMEI_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ocm-alloc.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ocm-alloc.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ocm-alloc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ocm-alloc.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/ubicom32/include/asm/ocm-alloc.h
-+ * Ubicom32 architecture specific ocm definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_OCM_ALLOC_H
-+#define _ASM_UBICOM32_OCM_ALLOC_H
-+
-+
-+extern void *ocm_inst_alloc(size_t size, pid_t pid);
-+extern int ocm_free(const void *ptr);
-+extern int ocm_inst_free(const void *ptr);
-+
-+#endif /* _ASM_UBICOM32_OCM_ALLOC_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ocm_size.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ocm_size.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ocm_size.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ocm_size.h 2009-12-14 14:30:27.000000000 +0200
-@@ -0,0 +1,3 @@
-+#define APP_OCM_CODE_SIZE (0x3ffc2e00-0x3ffc0000)
-+#define APP_OCM_DATA_SIZE (0x3ffd3500-0x3ffc8000)
-+
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ocm_text.lds.inc linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ocm_text.lds.inc
---- linux-2.6.30.10/arch/ubicom32/include/asm/ocm_text.lds.inc 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ocm_text.lds.inc 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,175 @@
-+/*
-+ * arch/ubicom32/include/asm/ocm_text.lds.inc
-+ * <TODO: Replace with short file description>
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+*(.text.do_csum)
-+*(.text.tcp_packet)
-+*(.text.ipt_do_table)
-+*(.text.nf_conntrack_in)
-+*(.text.ip_forward)
-+*(.text.dev_queue_xmit)
-+*(.text.netif_receive_skb)
-+*(.text.ip_route_input)
-+*(.text.ip_finish_output)
-+*(.text.nf_iterate)
-+*(.text.__hash_conntrack)
-+*(.text.memset)
-+*(.text.memcpy)
-+*(.text.ip_rcv)
-+*(.text.__nf_conntrack_find)
-+*(.text.dev_hard_start_xmit)
-+*(.text.vlan_dev_hard_start_xmit)
-+*(.text.vlan_dev_hard_header)
-+*(.text.__nf_ct_refresh_acct)
-+*(.text.tcp_error)
-+*(.text.pfifo_fast_enqueue)
-+*(.text.ipv4_confirm)
-+*(.text.ip_output)
-+*(.text.neigh_connected_output)
-+*(.text.nf_hook_slow)
-+*(.text.nf_nat_packet)
-+*(.text.local_bh_enable)
-+*(.text.pfifo_fast_dequeue)
-+*(.text.ubi32_eth_receive)
-+*(.text.nf_nat_fn)
-+*(.text.skb_checksum)
-+*(.text.memmove)
-+*(.text.ubi32_eth_tx_done)
-+*(.text.eth_header)
-+*(.text.skb_release_data)
-+*(.text.nf_conntrack_find_get)
-+*(.text.process_backlog)
-+*(.text.vlan_skb_recv)
-+*(.text.ip_rcv_finish)
-+*(.text.__qdisc_run)
-+*(.text.skb_push)
-+*(.text.eth_type_trans)
-+*(.text.__alloc_skb)
-+*(.text.netif_rx)
-+*(.text.nf_ip_checksum)
-+*(.text.__skb_checksum_complete_head)
-+*(.text.ipv4_conntrack_defrag)
-+*(.text.tcp_pkt_to_tuple)
-+*(.text.kfree)
-+*(.text.tcp_manip_pkt)
-+*(.text.skb_put)
-+*(.text.nf_ct_get_tuple)
-+*(.text.__kmalloc)
-+*(.text.ubi32_eth_start_xmit)
-+*(.text.free_block)
-+*(.text.ipt_hook)
-+*(.text.kmem_cache_free)
-+*(.text.skb_pull_rcsum)
-+*(.text.cache_alloc_refill)
-+*(.text.skb_release_head_state)
-+*(.text.manip_pkt)
-+*(.text.ip_sabotage_in)
-+*(.text.ip_forward_finish)
-+*(.text.kmem_cache_alloc)
-+*(.text.local_bh_disable)
-+*(.text.ipv4_pkt_to_tuple)
-+*(.text.inet_proto_csum_replace4)
-+*(.text.__nf_ct_l4proto_find)
-+*(.text.csum_partial)
-+*(.text.neigh_resolve_output)
-+*(.text.__kfree_skb)
-+*(.text.kfree_skb)
-+*(.text.__find_vlan_dev)
-+*(.text.ldsr_ctxsw_thread)
-+*(.text.__do_IRQ)
-+*(.text.skb_pull)
-+*(.text.ipv4_invert_tuple)
-+*(.text.nf_ct_invert_tuplepr)
-+*(.text.skb_make_writable)
-+*(.text.ipv4_get_l4proto)
-+*(.text.handle_IRQ_event)
-+*(.text.net_rx_action)
-+*(.text.__do_softirq)
-+*(.text.nf_nat_in)
-+*(.text.note_interrupt)
-+*(.text.ipv4_conntrack_in)
-+*(.text.dst_release)
-+*(.text.tasklet_action)
-+*(.text.nf_nat_out)
-+*(.text.nf_ct_invert_tuple)
-+*(.text.do_IRQ)
-+*(.text.__tasklet_schedule)
-+*(.text.__skb_checksum_complete)
-+*(.text.ubi32_eth_interrupt)
-+*(.text.dev_kfree_skb_any)
-+*(.text.ret_from_interrupt_to_kernel)
-+*(.text.preemptive_context_save)
-+*(.text.irq_ack_vector)
-+*(.text.update_wall_time)
-+*(.text.ldsr_thread)
-+*(.text.irq_exit)
-+*(.text.ubi32_eth_do_tasklet)
-+*(.text.__napi_schedule)
-+*(.text.idle_cpu)
-+*(.text.run_timer_softirq)
-+*(.text.ldsr_mask_vector)
-+*(.text.irq_enter)
-+*(.text.ldsr_get_lsb)
-+*(.text.ldsr_unmask_vector)
-+*(.text.ip_fast_csum)
-+*(.text.hrtimer_run_queues)
-+*(.text.tcp_invert_tuple)
-+*(.text.T___705)
-+*(.text.run_posix_cpu_timers)
-+*(.text.free_hot_cold_page)
-+*(.text.lock_timer_base)
-+*(.text.calc_delta_mine)
-+*(.text.slab_destroy)
-+*(.text.rcu_pending)
-+*(.text.scheduler_tick)
-+*(.text.hrtimer_run_pending)
-+*(.text.do_softirq)
-+*(.text.del_timer)
-+*(.text.irq_end_vector)
-+*(.text.pci_read_u32)
-+*(.text.udivmodsi4)
-+*(.text.memcmp)
-+*(.text.memset)
-+*(.text.__slab_alloc)
-+*(.text.br_handle_frame)
-+*(.text.br_fdb_update)
-+*(.text.__br_fdb_get)
-+*(.text.br_forward)
-+*(.text.br_handle_frame_finish)
-+*(.text.pci_write_u32)
-+*(.text.kmem_freepages)
-+*(.text.br_dev_queue_push_xmit)
-+*(.text.ioread32)
-+*(.text.next_zones_zonelist)
-+*(.text.ubi32_pci_read_u32)
-+*(.text.zone_watermark_ok)
-+*(.text.__rmqueue_smallest)
-+*(.text.ubi32_eth_napi_poll)
-+*(.text.ubi32_pci_write_u32)
-+*(.text.ubi32_pci_read_u32)
-+*(.text._local_bh_enable)
-+*(.text._local_bh_disable)
-+*(.text.get_slab)
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/page.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/page.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/page.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/page.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,106 @@
-+/*
-+ * arch/ubicom32/include/asm/page.h
-+ * Memory page related operations and definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_PAGE_H
-+#define _ASM_UBICOM32_PAGE_H
-+
-+/* PAGE_SHIFT determines the page size */
-+
-+#define PAGE_SHIFT 12
-+#define PAGE_SIZE (1 << PAGE_SHIFT)
-+#define PAGE_MASK (~(PAGE_SIZE-1))
-+
-+#include <asm/setup.h>
-+
-+#ifndef __ASSEMBLY__
-+
-+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-+#define free_user_page(page, addr) free_page(addr)
-+
-+#define clear_page(page) memset((page), 0, PAGE_SIZE)
-+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-+
-+#define clear_user_page(page, vaddr, pg) clear_page(page)
-+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-+
-+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-+ alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-+
-+/*
-+ * These are used to make use of C type-checking..
-+ */
-+typedef struct { unsigned long pte; } pte_t;
-+typedef struct { unsigned long pmd[16]; } pmd_t;
-+typedef struct { unsigned long pgd; } pgd_t;
-+typedef struct { unsigned long pgprot; } pgprot_t;
-+typedef struct page *pgtable_t;
-+
-+#define pte_val(x) ((x).pte)
-+#define pmd_val(x) ((&x)->pmd[0])
-+#define pgd_val(x) ((x).pgd)
-+#define pgprot_val(x) ((x).pgprot)
-+
-+#define __pte(x) ((pte_t) { (x) } )
-+#define __pmd(x) ((pmd_t) { (x) } )
-+#define __pgd(x) ((pgd_t) { (x) } )
-+#define __pgprot(x) ((pgprot_t) { (x) } )
-+
-+extern unsigned long memory_start;
-+extern unsigned long memory_end;
-+
-+#endif /* !__ASSEMBLY__ */
-+
-+#include <asm/page_offset.h>
-+
-+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-+
-+#ifndef __ASSEMBLY__
-+
-+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
-+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
-+
-+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-+
-+#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-+#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-+
-+#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
-+#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
-+#define pfn_valid(pfn) ((pfn) < max_mapnr)
-+
-+#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
-+ ((void *)(kaddr) < (void *)memory_end))
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#ifdef __KERNEL__
-+#include <asm-generic/page.h>
-+#endif
-+
-+#endif /* _ASM_UBICOM32_PAGE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/page_offset.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/page_offset.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/page_offset.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/page_offset.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,35 @@
-+/*
-+ * arch/ubicom32/include/asm/page_offset.h
-+ * Definition of PAGE_OFFSET_RAW for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_PAGE_OFFSET_H
-+#define _ASM_UBICOM32_PAGE_OFFSET_H
-+
-+/* This handles the memory map.. */
-+#define PAGE_OFFSET_RAW 0x3ffc0000
-+
-+#endif /* _ASM_UBICOM32_PAGE_OFFSET_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/param.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/param.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/param.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/param.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,49 @@
-+/*
-+ * arch/ubicom32/include/asm/param.h
-+ * Definition of miscellaneous constants, including HZ.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_PARAM_H
-+#define _ASM_UBICOM32_PARAM_H
-+
-+#ifdef __KERNEL__
-+#define HZ CONFIG_HZ
-+#define USER_HZ HZ
-+#define CLOCKS_PER_SEC (USER_HZ)
-+#endif
-+
-+#ifndef HZ
-+#define HZ 100
-+#endif
-+
-+#define EXEC_PAGESIZE 4096
-+
-+#ifndef NOGROUP
-+#define NOGROUP (-1)
-+#endif
-+
-+#define MAXHOSTNAMELEN 64 /* max length of hostname */
-+
-+#endif /* _ASM_UBICOM32_PARAM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/pci.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pci.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/pci.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pci.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,210 @@
-+/*
-+ * arch/ubicom32/include/asm/pci.h
-+ * Definitions of PCI operations for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_PCI_H
-+#define _ASM_UBICOM32_PCI_H
-+
-+#include <asm/io.h>
-+
-+/* The PCI address space does equal the physical memory
-+ * address space. The networking and block device layers use
-+ * this boolean for bounce buffer decisions.
-+ */
-+#define PCI_DMA_BUS_IS_PHYS (1)
-+
-+
-+
-+/*
-+ * Perform a master read/write to the PCI bus.
-+ * These functions return a PCI_RESP_xxx code.
-+ */
-+extern u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data);
-+extern u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data);
-+extern u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data);
-+extern u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data);
-+extern u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data);
-+extern u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data);
-+
-+
-+#define PCIBIOS_MIN_IO 0x100
-+#define PCIBIOS_MIN_MEM 0x10000000
-+
-+#define pcibios_assign_all_busses() 0
-+#define pcibios_scan_all_fns(a, b) 0
-+extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-+ struct resource *res);
-+
-+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-+ struct pci_bus_region *region);
-+
-+struct pci_sys_data;
-+struct pci_bus;
-+
-+struct hw_pci {
-+ struct list_head buses;
-+ int nr_controllers;
-+ int (*setup)(int nr, struct pci_sys_data *);
-+ struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
-+ void (*preinit)(void);
-+ void (*postinit)(void);
-+ u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
-+ int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
-+};
-+
-+/*
-+ * Per-controller structure
-+ */
-+struct pci_sys_data {
-+ struct list_head node;
-+ int busnr; /* primary bus number */
-+ u64 mem_offset; /* bus->cpu memory mapping offset */
-+ unsigned long io_offset; /* bus->cpu IO mapping offset */
-+ struct pci_bus *bus; /* PCI bus */
-+ struct resource *resource[3]; /* Primary PCI bus resources */
-+ /* Bridge swizzling */
-+ u8 (*swizzle)(struct pci_dev *, u8 *);
-+ /* IRQ mapping */
-+ int (*map_irq)(struct pci_dev *, u8, u8);
-+ struct hw_pci *hw;
-+};
-+
-+static inline struct resource *
-+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-+{
-+ struct resource *root = NULL;
-+
-+ if (res->flags & IORESOURCE_IO)
-+ root = &ioport_resource;
-+ if (res->flags & IORESOURCE_MEM)
-+ root = &iomem_resource;
-+
-+ return root;
-+}
-+
-+static inline void pcibios_set_master(struct pci_dev *dev)
-+{
-+ /* No special bus mastering setup handling */
-+}
-+#define HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE 1
-+#define HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY 1
-+
-+#ifdef CONFIG_PCI
-+static inline void * pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-+ dma_addr_t *dma_handle)
-+{
-+ void *vaddr = kmalloc(size, GFP_KERNEL);
-+ if(vaddr != NULL) {
-+ *dma_handle = virt_to_phys(vaddr);
-+ }
-+ return vaddr;
-+}
-+
-+static inline int pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
-+{
-+ return 1;
-+}
-+
-+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-+ void *cpu_addr, dma_addr_t dma_handle)
-+{
-+ kfree(cpu_addr);
-+ return;
-+}
-+
-+static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
-+ size_t size, int direction)
-+{
-+ return virt_to_phys(ptr);
-+}
-+
-+static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
-+ size_t size, int direction)
-+{
-+ return;
-+}
-+
-+static inline dma_addr_t
-+pci_map_page(struct pci_dev *hwdev, struct page *page,
-+ unsigned long offset, size_t size, int direction)
-+{
-+ return pci_map_single(hwdev, page_address(page) + offset, size, (int)direction);
-+}
-+
-+static inline void
-+pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
-+ size_t size, int direction)
-+{
-+ pci_unmap_single(hwdev, dma_address, size, direction);
-+}
-+
-+static inline int
-+pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-+ int nents, int direction)
-+{
-+ return nents;
-+}
-+
-+static inline void
-+pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-+ int nents, int direction)
-+{
-+}
-+
-+static inline void
-+pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
-+ int nelems, int direction)
-+{
-+}
-+
-+static inline void
-+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
-+ int nelems, int direction)
-+{
-+}
-+
-+static inline void
-+pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
-+ size_t size, int direction)
-+{
-+}
-+
-+static inline void
-+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
-+ size_t size, int direction)
-+{
-+}
-+
-+static inline int
-+pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
-+{
-+ return dma_addr == 0;
-+}
-+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-+#endif
-+
-+#endif /* _ASM_UBICOM32_PCI_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/pcm_tio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pcm_tio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/pcm_tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pcm_tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,84 @@
-+/*
-+ * arch/ubicom32/include/asm/pcm_tio.h
-+ * Ubicom32 architecture PCM TIO definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_PCM_TIO_H
-+#define _ASM_UBICOM32_PCM_TIO_H
-+
-+#include <asm/devtree.h>
-+
-+#define PCM_TIO_REGS_VERSION 2
-+struct pcm_tio_regs {
-+ /*
-+ * set this value to 1 to reload the parameters and restart the HRT
-+ */
-+ u32_t reload;
-+
-+ /*
-+ * Pointers to the input and output buffers
-+ */
-+ void *input_buf;
-+ void *output_buf;
-+
-+ /*
-+ * Buffer size (see pcm_hrt.S for constraints)
-+ */
-+ u32_t buffer_size;
-+
-+ /*
-+ * Current cycle. This variable increases every time half the buffer
-+ * is consumed.
-+ */
-+ u32_t cycle;
-+
-+ /*
-+ * Fields below this line are not accessed by the HRT. They are purely
-+ * informational for the user of this TIO.
-+ */
-+
-+ /*
-+ * Version of this structure
-+ */
-+ u32_t version;
-+
-+ /*
-+ * Number of channels supported
-+ */
-+ u32_t channels;
-+
-+ /*
-+ * Maximum buffer size
-+ */
-+ u32_t max_buffer_size;
-+};
-+
-+/*
-+ * Our device node
-+ */
-+#define PCM_TIO_NODE_VERSION 1
-+struct pcm_tio_node {
-+ struct devtree_node dn;
-+ u32_t version;
-+ struct pcm_tio_regs *regs;
-+};
-+
-+#endif
-+
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/percpu.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/percpu.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/percpu.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/percpu.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/percpu.h
-+ * Generic percpu.h for the Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_PERCPU_H
-+#define _ASM_UBICOM32_PERCPU_H
-+
-+#include <asm-generic/percpu.h>
-+
-+#endif /* _ASM_UBICOM32_PERCPU_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/pgalloc.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pgalloc.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/pgalloc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pgalloc.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/ubicom32/include/asm/pgalloc.h
-+ * Page table allocation definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_PGALLOC_H
-+#define _ASM_UBICOM32_PGALLOC_H
-+
-+#include <linux/mm.h>
-+#include <asm/setup.h>
-+
-+#define check_pgt_cache() do { } while (0)
-+
-+#endif /* _ASM_UBICOM32_PGALLOC_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/pgtable.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pgtable.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/pgtable.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/pgtable.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,124 @@
-+/*
-+ * arch/ubicom32/include/asm/pgtable.h
-+ * Ubicom32 pseudo page table definitions and operations.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2004 Microtronix Datacom Ltd
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ * and various works, Alpha, ix86, M68K, Sparc, ...et al
-+ */
-+#ifndef _ASM_UBICOM32_PGTABLE_H
-+#define _ASM_UBICOM32_PGTABLE_H
-+
-+#include <asm-generic/4level-fixup.h>
-+
-+//vic - this bit copied from m68knommu version
-+#include <asm/setup.h>
-+#include <asm/io.h>
-+#include <linux/sched.h>
-+
-+typedef pte_t *pte_addr_t;
-+
-+#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
-+#define pgd_none(pgd) (0)
-+#define pgd_bad(pgd) (0)
-+#define pgd_clear(pgdp)
-+#define kern_addr_valid(addr) (1)
-+#define pmd_offset(a, b) ((void *)0)
-+
-+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
-+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
-+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
-+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
-+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
-+//vic - this bit copied from m68knommu version
-+
-+extern void paging_init(void);
-+#define swapper_pg_dir ((pgd_t *) 0)
-+
-+#define __swp_type(x) (0)
-+#define __swp_offset(x) (0)
-+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-+
-+/*
-+ * pgprot_noncached() is only for infiniband pci support, and a real
-+ * implementation for RAM would be more complicated.
-+ */
-+#define pgprot_noncached(prot) (prot)
-+
-+static inline int pte_file(pte_t pte) { return 0; }
-+
-+/*
-+ * ZERO_PAGE is a global shared page that is always zero: used
-+ * for zero-mapped memory areas etc..
-+ */
-+#define ZERO_PAGE(vaddr) (virt_to_page(0))
-+
-+extern unsigned int kobjsize(const void *objp);
-+extern int is_in_rom(unsigned long);
-+
-+/*
-+ * No page table caches to initialise
-+ */
-+#define pgtable_cache_init() do { } while (0)
-+
-+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
-+ remap_pfn_range(vma, vaddr, pfn, size, prot)
-+
-+extern inline void flush_cache_mm(struct mm_struct *mm)
-+{
-+}
-+
-+extern inline void flush_cache_range(struct mm_struct *mm,
-+ unsigned long start,
-+ unsigned long end)
-+{
-+}
-+
-+/* Push the page at kernel virtual address and clear the icache */
-+extern inline void flush_page_to_ram (unsigned long address)
-+{
-+}
-+
-+/* Push n pages at kernel virtual address and clear the icache */
-+extern inline void flush_pages_to_ram (unsigned long address, int n)
-+{
-+}
-+
-+/*
-+ * All 32bit addresses are effectively valid for vmalloc...
-+ * Sort of meaningless for non-VM targets.
-+ */
-+#define VMALLOC_START 0
-+#define VMALLOC_END 0xffffffff
-+
-+#define arch_enter_lazy_mmu_mode() do {} while (0)
-+#define arch_leave_lazy_mmu_mode() do {} while (0)
-+#define arch_flush_lazy_mmu_mode() do {} while (0)
-+#define arch_enter_lazy_cpu_mode() do {} while (0)
-+#define arch_leave_lazy_cpu_mode() do {} while (0)
-+#define arch_flush_lazy_cpu_mode() do {} while (0)
-+
-+#endif /* _ASM_UBICOM32_PGTABLE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/plio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/plio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/plio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/plio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,313 @@
-+/*
-+ * plio.h
-+ * PLIO defines.
-+ *
-+ * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All Rights Reserved.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can
-+ * redistribute it and/or modify it under the terms of the GNU General
-+ * Public License as published by the Free Software Foundation, either
-+ * version 2 of the License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+ * See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ * This file contains confidential information of Ubicom, Inc. and your use of
-+ * this file is subject to the Ubicom Software License Agreement distributed with
-+ * this file. If you are uncertain whether you are an authorized user or to report
-+ * any unauthorized use, please contact Ubicom, Inc. at +1-408-789-2200.
-+ * Unauthorized reproduction or distribution of this file is subject to civil and
-+ * criminal penalties.
-+ */
-+
-+#ifndef __PLIO__H__
-+#define __PLIO__H__
-+
-+#include <asm/ip5000.h>
-+#include <asm/thread.h>
-+
-+#define PLIO_PORT RD
-+#define PLIO_EXT_PORT RI
-+
-+#define TRANSMIT_FIFO_WATERMARK 8
-+
-+/*
-+ * PLIO non-blocking register definitions
-+ */
-+#define PLIO_FN 2
-+
-+typedef struct {
-+ unsigned : 10;
-+ unsigned rxfifo_thread_enable: 1; /* allowed rxfifo thread enable */
-+ unsigned : 1;
-+ unsigned rxfifo_thread: 4; /* allowed rxfifo thread access */
-+ unsigned : 4;
-+ unsigned br_thread: 4; /* allowed blocking region thread access */
-+ unsigned fn_reset: 4; /* function reset bit vector */
-+ unsigned rxfifo_sel: 1; /* select between RXFIFO 0 and 1 */
-+ unsigned fn_sel: 3; /* select port function */
-+} plio_io_function_t;
-+
-+typedef struct {
-+ unsigned : 24;
-+ unsigned pin:8;
-+} plio_gpio_t;
-+
-+typedef struct {
-+ unsigned : 16;
-+ unsigned txfifo_uf: 1; /* TXFIFO underflow */
-+ unsigned txfifo_wm: 1; /* TXFIFO watermark */
-+ unsigned rxfifo_of: 1; /* RXFIFO overflow */
-+ unsigned rxfifo_wm: 1; /* RXFIFO watermark */
-+ unsigned : 5;
-+ unsigned lreg_int_addr_rd: 1; /* read from specified LREG address */
-+ unsigned lreg_int_addr_wr: 1; /* write to specified LREG address */
-+ unsigned extctl_int: 4; /* synchronized external interrupts */
-+ unsigned pfsm_int: 1; /* state machine */
-+} plio_intstat_t;
-+
-+typedef struct {
-+ unsigned txfifo_reset: 1; /* TXFIFO reset for int_set only */
-+ unsigned rxfifo_reset: 1; /* RXFIFO reset for int_set only */
-+ unsigned : 11;
-+ unsigned idif_txfifo_flush: 1; /* flush TXFIFO and idif_txfifo */
-+ unsigned idif_rxfifo_flush: 1; /* flush RXFIFO and idif_rxfifo */
-+ unsigned pfsm_start: 1; /* input to fsm */
-+ unsigned txfifo_uf: 1; /* TXFIFO underflow */
-+ unsigned txfifo_wm: 1; /* TXFIFO watermark */
-+ unsigned rxfifo_of: 1; /* RXFIFO overflow */
-+ unsigned rxfifo_wm: 1; /* RXFIFO watermark */
-+ unsigned : 5;
-+ unsigned lreg_int_addr_rd: 1; /* read from specified LREG address */
-+ unsigned lreg_int_addr_wr: 1; /* write to specified LREG address */
-+ unsigned extctl_int: 4; /* synchronized external interrupts */
-+ unsigned pfsm_int: 1; /* state machine */
-+} plio_intset_t;
-+
-+typedef enum {
-+ PLIO_PORT_MODE_D,
-+ PLIO_PORT_MODE_DE,
-+ PLIO_PORT_MODE_DI,
-+ PLIO_PORT_MODE_DEI,
-+ PLIO_PORT_MODE_DC,
-+} plio_port_mode_t;
-+
-+typedef enum {
-+ PLIO_CLK_CORE, /* CORE CLK */
-+ PLIO_CLK_IO, /* IO CLK */
-+ PLIO_CLK_EXT, /* EXT CLK */
-+} plio_clk_src_t;
-+typedef struct {
-+ unsigned : 4;
-+ unsigned edif_iaena_sel: 1; /* Input Address Enable Select */
-+ unsigned edif_iaclk_sel: 1; /* Input Address Clock Select */
-+ unsigned edif_iald_inv: 1; /* Input Address Strobe Invert */
-+ unsigned edif_idclk_sel: 1; /* Input Data Clock Select */
-+ unsigned edif_idld_inv: 1; /* Input Data Strobe Invert */
-+ unsigned edif_ds: 3; /* specify IDR and ODR data shift */
-+ unsigned edif_cmp_mode: 1; /* configure IDR comparator output */
-+ unsigned edif_idena_sel: 1; /* Input Data Enable Select */
-+ unsigned ecif_extclk_ena: 1; /* plio_extctl output select */
-+ unsigned idif_tx_fifo_cmd_sel: 1; /* select pfsm_cmd data word position */
-+ unsigned ptif_porti_cfg: 2; /* select port I pin configuration */
-+ unsigned ptif_portd_cfg: 3; /* select port D pin configuration */
-+ plio_port_mode_t ptif_port_mode: 3; /* select other plio ports */
-+ unsigned icif_clk_plio_ext_inv: 1; /* invert external plio clock when set */
-+ unsigned icif_rst_plio: 1; /* reset plio function and io fifos */
-+ plio_clk_src_t icif_clk_src_sel: 2; /* select plio clock source */
-+ unsigned pfsm_prog: 1; /* enable pfsm programming */
-+ unsigned pfsm_cmd: 3; /* software input to pfsm */
-+} plio_fctl0_t;
-+
-+typedef struct {
-+ unsigned : 2;
-+ unsigned idif_byteswap_tx: 3; /* swap TXFIFO byte order */
-+ unsigned idif_byteswap_rx: 3; /* swap RXFIFO byte order */
-+ unsigned : 1;
-+ unsigned lreg_ena: 1; /* enable local register map */
-+ unsigned lreg_addr_fifo_cmp_ena: 1; /* enable a specific LREG address from/to TX/RX fifos */
-+ unsigned lreg_addr_fifo_cmp: 5; /* LREG address routed from/to TX/RX fifos */
-+ unsigned : 1;
-+ unsigned dcod_iald_idld_sel: 2; /* select address/data strobes */
-+ unsigned dcod_rw_src_sel: 1; /* select LREG strobe source */
-+ unsigned dcod_rd_sel: 5; /* select read strobe source */
-+ unsigned dcod_wr_sel: 5; /* select write strobe source */
-+ unsigned dcod_rd_lvl: 1; /* select active level of read strobe */
-+ unsigned dcod_wr_lvl: 1; /* select active level of read strobe */
-+} plio_fctl1_t;
-+
-+typedef struct {
-+ unsigned icif_eclk_div: 16; /* external plio clock divider */
-+ unsigned icif_iclk_div: 16; /* internal plio clock divider */
-+} plio_fctl2_t;
-+
-+typedef struct {
-+ unsigned : 27;
-+ unsigned pfsm_state: 5; /* current pfsm state */
-+} plio_stat_0_t;
-+
-+typedef struct {
-+ unsigned : 3;
-+ unsigned lreg_r_int_addr: 5;
-+ unsigned : 11;
-+ unsigned lreg_w_int_addr: 5;
-+ unsigned lreg_w_int_data: 8;
-+} plio_stat_1_t;
-+
-+typedef struct {
-+ unsigned : 32;
-+} plio_stat_2_t;
-+
-+typedef struct {
-+ unsigned tx: 16;
-+ unsigned rx: 16;
-+} plio_io_fifo_wm_t, plio_io_fifo_lvl_t;
-+
-+
-+/* plio blocking region register definitions
-+ */
-+typedef struct {
-+ unsigned ns1: 5;
-+ unsigned ic1: 7;
-+ unsigned ec1: 4;
-+ unsigned ns0: 5;
-+ unsigned ic0: 7;
-+ unsigned ec0: 4;
-+} plio_sram_t;
-+
-+typedef struct {
-+ unsigned : 2;
-+ unsigned s9: 3;
-+ unsigned s8: 3;
-+ unsigned s7: 3;
-+ unsigned s6: 3;
-+ unsigned s5: 3;
-+ unsigned s4: 3;
-+ unsigned s3: 3;
-+ unsigned s2: 3;
-+ unsigned s1: 3;
-+ unsigned s0: 3;
-+} plio_grpsel_t;
-+
-+typedef struct {
-+ unsigned s7: 4;
-+ unsigned s6: 4;
-+ unsigned s5: 4;
-+ unsigned s4: 4;
-+ unsigned s3: 4;
-+ unsigned s2: 4;
-+ unsigned s1: 4;
-+ unsigned s0: 4;
-+} plio_cs_lut_t;
-+
-+typedef struct {
-+ unsigned lut3: 8;
-+ unsigned lut2: 8;
-+ unsigned lut1: 8;
-+ unsigned lut0: 8;
-+} plio_extctl_t;
-+
-+typedef struct {
-+ plio_grpsel_t grpsel[4];
-+ u16_t cv[16];
-+ plio_cs_lut_t cs_lut[4];
-+ plio_extctl_t extctl_o_lut[8];
-+} plio_pfsm_t;
-+
-+typedef struct {
-+ u32_t odr_oe_sel;
-+ u32_t odr_oe;
-+ u32_t cmp;
-+ u32_t ncmp;
-+ u32_t cmp_mask;
-+} plio_edif_t;
-+
-+typedef enum {
-+ PLIO_ECIF_CLK_OUT = 9,
-+ PLIO_ECIF_IALD = 9,
-+ PLIO_ECIF_CLK_IN = 8,
-+ PLIO_ECIF_IDLD = 8,
-+ PLIO_ECIF_INT = 2,
-+} plio_ecif_output_t;
-+
-+typedef struct {
-+ u32_t bypass_sync;
-+ u32_t ift;
-+ u32_t output_type;
-+ u32_t output_ena;
-+ u32_t output_lvl;
-+} plio_ecif_t;
-+
-+typedef struct {
-+ u32_t idr_addr_pos_mask;
-+ u32_t reserved;
-+ u32_t lreg_bar;
-+} plio_dcod_t;
-+
-+typedef struct {
-+ u32_t addr_rd_ena;
-+ u32_t addr_wr_ena;
-+ u32_t addr_rd_int_ena;
-+ u32_t addr_wr_int_ena;
-+} plio_lcfg_t;
-+
-+
-+/*
-+ * PLIO configuration
-+ */
-+typedef struct {
-+ plio_fctl0_t fctl0;
-+ plio_fctl1_t fctl1;
-+ plio_fctl2_t fctl2;
-+} plio_fctl_t;
-+
-+typedef struct {
-+ plio_pfsm_t pfsm;
-+ plio_edif_t edif;
-+ plio_ecif_t ecif;
-+ plio_dcod_t dcod;
-+ plio_lcfg_t lcfg;
-+} plio_config_t;
-+
-+typedef struct {
-+ plio_io_function_t function;
-+ plio_gpio_t gpio_ctl;
-+ plio_gpio_t gpio_out;
-+ plio_gpio_t gpio_in;
-+ plio_intstat_t intstat;
-+ plio_intstat_t intmask;
-+ plio_intset_t intset;
-+ plio_intstat_t intclr;
-+ unsigned tx_lo;
-+ unsigned tx_hi;
-+ unsigned rx_lo;
-+ unsigned rx_hi;
-+ plio_fctl0_t fctl0;
-+ plio_fctl1_t fctl1;
-+ plio_fctl2_t fctl2;
-+ plio_stat_0_t stat0;
-+ plio_stat_1_t stat1;
-+ plio_stat_2_t stat2;
-+ plio_io_fifo_wm_t fifo_wm;
-+ plio_io_fifo_lvl_t fifo_lvl;
-+} plio_nbr_t;
-+
-+typedef struct {
-+ u32_t pfsm_sram[256];
-+ plio_config_t config;
-+} plio_br_t;
-+
-+#define PLIO_NBR ((plio_nbr_t *)(PLIO_PORT))
-+#define PLIO_BR ((plio_br_t *)((PLIO_PORT + IO_PORT_BR_OFFSET)))
-+#define PEXT_NBR ((plio_nbr_t *)(PLIO_EXT_PORT))
-+
-+extern void plio_init(const plio_fctl_t *plio_fctl, const plio_config_t *plio_config, const plio_sram_t plio_sram_cfg[], int sram_cfg_size);
-+
-+#endif // __PLIO__H__
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/poll.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/poll.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/poll.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/poll.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/ubicom32/include/asm/poll.h
-+ * Ubicom32 specific poll() related flags definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_POLL_H
-+#define _ASM_UBICOM32_POLL_H
-+
-+#define POLLWRNORM POLLOUT
-+#define POLLWRBAND 0x0100
-+
-+#include <asm-generic/poll.h>
-+
-+#endif /* _ASM_UBICOM32_POLL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/posix_types.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/posix_types.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/posix_types.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/posix_types.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,93 @@
-+/*
-+ * arch/ubicom32/include/asm/posix_types.h
-+ * Ubicom32 architecture posix types.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2004 Microtronix Datacom Ltd
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef __ARCH_UBICOM32_POSIX_TYPES_H
-+#define __ARCH_UBICOM32_POSIX_TYPES_H
-+
-+/*
-+ * This file is generally used by user-level software, so you need to
-+ * be a little careful about namespace pollution etc. Also, we cannot
-+ * assume GCC is being used.
-+ */
-+
-+typedef unsigned long __kernel_ino_t;
-+typedef unsigned short __kernel_mode_t;
-+typedef unsigned short __kernel_nlink_t;
-+typedef long __kernel_off_t;
-+typedef int __kernel_pid_t;
-+typedef unsigned short __kernel_ipc_pid_t;
-+typedef unsigned short __kernel_uid_t;
-+typedef unsigned short __kernel_gid_t;
-+typedef unsigned int __kernel_size_t;
-+typedef int __kernel_ssize_t;
-+typedef int __kernel_ptrdiff_t;
-+typedef long __kernel_time_t;
-+typedef long __kernel_suseconds_t;
-+typedef long __kernel_clock_t;
-+typedef int __kernel_timer_t;
-+typedef int __kernel_clockid_t;
-+typedef int __kernel_daddr_t;
-+typedef char * __kernel_caddr_t;
-+typedef unsigned short __kernel_uid16_t;
-+typedef unsigned short __kernel_gid16_t;
-+typedef unsigned int __kernel_uid32_t;
-+typedef unsigned int __kernel_gid32_t;
-+
-+typedef unsigned short __kernel_old_uid_t;
-+typedef unsigned short __kernel_old_gid_t;
-+typedef unsigned short __kernel_old_dev_t;
-+
-+#ifdef __GNUC__
-+typedef long long __kernel_loff_t;
-+#endif
-+
-+typedef struct {
-+#if defined(__KERNEL__) || defined(__USE_ALL)
-+ int val[2];
-+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-+ int __val[2];
-+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-+} __kernel_fsid_t;
-+
-+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-+
-+#undef __FD_SET
-+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-+
-+#undef __FD_CLR
-+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-+
-+#undef __FD_ISSET
-+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-+
-+#undef __FD_ZERO
-+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-+
-+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/processor.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/processor.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/processor.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/processor.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,163 @@
-+/*
-+ * arch/ubicom32/include/asm/processor.h
-+ * Thread related definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1995 Hamish Macdonald
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_PROCESSOR_H
-+#define _ASM_UBICOM32_PROCESSOR_H
-+
-+/*
-+ * Default implementation of macro that returns current
-+ * instruction pointer ("program counter").
-+ */
-+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-+
-+#include <linux/compiler.h>
-+#include <linux/threads.h>
-+#include <asm/types.h>
-+#include <asm/segment.h>
-+#include <asm/fpu.h>
-+#include <asm/ptrace.h>
-+#include <asm/current.h>
-+#include <asm/thread_info.h>
-+
-+#if defined(CONFIG_UBICOM32_V3)
-+ #define CPU "IP5K"
-+#endif
-+#if defined(CONFIG_UBICOM32_V4)
-+ #define CPU "IP7K"
-+#endif
-+#ifndef CPU
-+ #define CPU "UNKNOWN"
-+#endif
-+
-+/*
-+ * User space process size: 1st byte beyond user address space.
-+ */
-+extern unsigned long memory_end;
-+#define TASK_SIZE (memory_end)
-+
-+/*
-+ * This decides where the kernel will search for a free chunk of vm
-+ * space during mmap's. We won't be using it
-+ */
-+#define TASK_UNMAPPED_BASE 0
-+
-+/*
-+ * This is the structure where we are going to save callee-saved registers.
-+ * A5 is the return address, A7 is the stack pointer, A6 is the frame
-+ * pointer. This is the frame that is created because of switch_to. This
-+ * is not the frame due to interrupt preemption or because of syscall entry.
-+ */
-+
-+struct thread_struct {
-+ unsigned long d10; /* D10 */
-+ unsigned long d11; /* D11 */
-+ unsigned long d12; /* D12 */
-+ unsigned long d13; /* D13 */
-+ unsigned long a1; /* A1 */
-+ unsigned long a2; /* A2 */
-+ unsigned long a5; /* A5 return address. */
-+ unsigned long a6; /* A6 */
-+ unsigned long sp; /* A7 kernel stack pointer. */
-+};
-+
-+#define INIT_THREAD { \
-+ 0, 0, 0, 0, 0, 0, 0, 0, \
-+ sizeof(init_stack) + (unsigned long) init_stack - 8, \
-+}
-+
-+/*
-+ * Do necessary setup to start up a newly executed thread.
-+ *
-+ * pass the data segment into user programs if it exists,
-+ * it can't hurt anything as far as I can tell
-+ */
-+/*
-+ * Do necessary setup to start up a newly executed thread.
-+ */
-+#define start_thread(regs, new_pc, new_sp) \
-+ do { \
-+ regs->pc = new_pc & ~3; \
-+ regs->an[5] = new_pc & ~3; \
-+ regs->an[7] = new_sp; \
-+ regs->nesting_level = -1; \
-+ regs->frame_type = UBICOM32_FRAME_TYPE_NEW_THREAD; \
-+ regs->thread_type = NORMAL_THREAD; \
-+ } while(0)
-+
-+/* Forward declaration, a strange C thing */
-+struct task_struct;
-+
-+/* Free all resources held by a thread. */
-+static inline void release_thread(struct task_struct *dead_task)
-+{
-+}
-+
-+/* Prepare to copy thread state - unlazy all lazy status */
-+#define prepare_to_copy(tsk) do { } while (0)
-+
-+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-+
-+/*
-+ * Free current thread data structures etc..
-+ */
-+static inline void exit_thread(void)
-+{
-+}
-+
-+unsigned long thread_saved_pc(struct task_struct *tsk);
-+unsigned long get_wchan(struct task_struct *p);
-+
-+#define KSTK_EIP(tsk) (tsk->thread.a5)
-+#define KSTK_ESP(tsk) (tsk->thread.sp)
-+
-+#define cpu_relax() barrier()
-+
-+extern void processor_init(void);
-+extern unsigned int processor_timers(void);
-+extern unsigned int processor_threads(void);
-+extern unsigned int processor_frequency(void);
-+extern int processor_interrupts(unsigned int *int0, unsigned int *int1);
-+extern void processor_ocm(unsigned long *socm, unsigned long *eocm);
-+extern void processor_dram(unsigned long *sdram, unsigned long *edram);
-+
-+#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long))
-+#define KSTK_TOP(info) \
-+({ \
-+ unsigned long *__ptr = (unsigned long *)(info); \
-+ (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \
-+})
-+
-+#define task_pt_regs(task) \
-+({ \
-+ struct pt_regs *__regs__; \
-+ __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
-+ __regs__ - 1; \
-+})
-+
-+#endif /* _ASM_UBICOM32_PROCESSOR_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/profilesample.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/profilesample.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/profilesample.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/profilesample.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,44 @@
-+/*
-+ * arch/ubicom32/mach-common/profile.h
-+ * Private data for the profile module
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ */
-+
-+
-+#ifndef _PROFILESAMPLE_H_
-+#define _PROFILESAMPLE_H_
-+
-+/*
-+ * a sample taken by the ipProfile package for sending to the profilertool
-+ */
-+struct profile_sample {
-+ unsigned int pc; /* PC value */
-+ unsigned int a5; /* a5 contents for parent of leaf function */
-+ unsigned int parent; /* return address from stack, to find the caller */
-+ unsigned int latency; /* CPU clocks since the last message dispatch in this thread (thread 0 ony for now) */
-+ unsigned short active; /* which threads are active - for accurate counting */
-+ unsigned short d_blocked; /* which threads are blocked due to D cache misses */
-+ unsigned short i_blocked; /* which threads are blocked due to I cache misses */
-+ unsigned char cond_codes; /* for branch prediction */
-+ unsigned char thread; /* I-blocked, D-blocked, 4-bit thread number */
-+};
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ptrace.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ptrace.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ptrace.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ptrace.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,177 @@
-+/*
-+ * arch/ubicom32/include/asm/ptrace.h
-+ * Ubicom32 architecture ptrace support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_PTRACE_H
-+#define _ASM_UBICOM32_PTRACE_H
-+
-+#ifndef __ASSEMBLY__
-+
-+/*
-+ * We use hard coded constants because this is shared with user
-+ * space and the values are NOT allowed to change. Only fields
-+ * that are intended to be exposed get values.
-+ */
-+#define PT_D0 0
-+#define PT_D1 4
-+#define PT_D2 8
-+#define PT_D3 12
-+#define PT_D4 16
-+#define PT_D5 20
-+#define PT_D6 24
-+#define PT_D7 28
-+#define PT_D8 32
-+#define PT_D9 36
-+#define PT_D10 40
-+#define PT_D11 44
-+#define PT_D12 48
-+#define PT_D13 52
-+#define PT_D14 56
-+#define PT_D15 60
-+#define PT_A0 64
-+#define PT_A1 68
-+#define PT_A2 72
-+#define PT_A3 76
-+#define PT_A4 80
-+#define PT_A5 84
-+#define PT_A6 88
-+#define PT_A7 92
-+#define PT_SP 92
-+#define PT_ACC0HI 96
-+#define PT_ACC0LO 100
-+#define PT_MAC_RC16 104
-+#define PT_ACC1HI 108
-+#define PT_ACC1LO 112
-+#define PT_SOURCE3 116
-+#define PT_INST_CNT 120
-+#define PT_CSR 124
-+#define PT_DUMMY_UNUSED 128
-+#define PT_INT_MASK0 132
-+#define PT_INT_MASK1 136
-+#define PT_TRAP_CAUSE 140
-+#define PT_PC 144
-+#define PT_ORIGINAL_D0 148
-+#define PT_FRAME_TYPE 152
-+
-+/*
-+ * The following 'registers' are not registers at all but are used
-+ * locate the relocated sections.
-+ */
-+#define PT_TEXT_ADDR 200
-+#define PT_TEXT_END_ADDR 204
-+#define PT_DATA_ADDR 208
-+#define PT_EXEC_FDPIC_LOADMAP 212
-+#define PT_INTERP_FDPIC_LOADMAP 216
-+
-+/*
-+ * This struct defines the way the registers are stored on the
-+ * stack during a system call.
-+ */
-+enum thread_type {
-+ NORMAL_THREAD,
-+ KERNEL_THREAD,
-+};
-+
-+#define UBICOM32_FRAME_TYPE_SYSCALL -1 /* System call frame */
-+#define UBICOM32_FRAME_TYPE_INVALID 0 /* Invalid frame, no longer in use */
-+#define UBICOM32_FRAME_TYPE_INTERRUPT 1 /* Interrupt frame */
-+#define UBICOM32_FRAME_TYPE_TRAP 2 /* Trap frame */
-+#define UBICOM32_FRAME_TYPE_SIGTRAMP 3 /* Signal trampoline frame. */
-+#define UBICOM32_FRAME_TYPE_NEW_THREAD 4 /* New Thread. */
-+
-+struct pt_regs {
-+ /*
-+ * Data Registers
-+ */
-+ unsigned long dn[16];
-+
-+ /*
-+ * Address Registers
-+ */
-+ unsigned long an[8];
-+
-+ /*
-+ * Per thread misc registers.
-+ */
-+ unsigned long acc0[2];
-+ unsigned long mac_rc16;
-+ unsigned long acc1[2];
-+ unsigned long source3;
-+ unsigned long inst_cnt;
-+ unsigned long csr;
-+ unsigned long dummy_unused;
-+ unsigned long int_mask0;
-+ unsigned long int_mask1;
-+ unsigned long trap_cause;
-+ unsigned long pc;
-+ unsigned long original_dn_0;
-+
-+ /*
-+ * Frame type. Syscall frames are -1. For other types look above.
-+ */
-+ unsigned long frame_type;
-+
-+ /*
-+ * These fields are not exposed to ptrace.
-+ */
-+ unsigned long previous_pc;
-+ long nesting_level; /* When the kernel in in user space this
-+ * will be -1. */
-+ unsigned long thread_type; /* This indicates if this is a kernel
-+ * thread. */
-+};
-+
-+/*
-+ * This is the extended stack used by signal handlers and the context
-+ * switcher: it's pushed after the normal "struct pt_regs".
-+ */
-+struct switch_stack {
-+ unsigned long dummy;
-+};
-+
-+#ifdef __KERNEL__
-+
-+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-+#define PTRACE_GETREGS 12
-+#define PTRACE_SETREGS 13
-+
-+#ifndef PS_S
-+#define PS_S (0x2000)
-+#define PS_M (0x1000)
-+#endif
-+
-+extern int __user_mode(unsigned long sp);
-+
-+#define user_mode(regs) (__user_mode((regs->an[7])))
-+#define user_stack(regs) ((regs)->an[7])
-+#define instruction_pointer(regs) ((regs)->pc)
-+#define profile_pc(regs) instruction_pointer(regs)
-+extern void show_regs(struct pt_regs *);
-+#endif /* __KERNEL__ */
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _ASM_UBICOM32_PTRACE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/range-protect-asm.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/range-protect-asm.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/range-protect-asm.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/range-protect-asm.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,91 @@
-+/*
-+ * arch/ubicom32/include/asm/range-protect-asm.h
-+ * Assembly macros for enabling memory protection.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_RANGE_PROTECT_ASM_H
-+#define _ASM_UBICOM32_RANGE_PROTECT_ASM_H
-+
-+#if defined(__ASSEMBLY__)
-+
-+#include <asm/thread-asm.h>
-+
-+/*
-+ * You should only use the enable/disable ranges when you have the atomic lock,
-+ * if you do not there will be problems.
-+ */
-+
-+/*
-+ * enable_kernel_ranges
-+ * Enable the kernel ranges (disabling protection) for thread,
-+ * where thread == (1 << thread number)
-+ */
-+.macro enable_kernel_ranges thread
-+#ifdef CONFIG_PROTECT_KERNEL
-+ or.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Enable Range Register */
-+ or.4 D_RANGE0_EN, D_RANGE0_EN, \thread
-+ or.4 D_RANGE1_EN, D_RANGE1_EN, \thread
-+#endif
-+.endm
-+
-+/*
-+ * enable_kernel_ranges_for_current
-+ * Enable the kernel ranges (disabling protection) for this thread
-+ */
-+.macro enable_kernel_ranges_for_current scratch_reg
-+#ifdef CONFIG_PROTECT_KERNEL
-+ thread_get_self_mask \scratch_reg
-+ enable_kernel_ranges \scratch_reg
-+#endif
-+.endm
-+
-+/*
-+ * disable_kernel_ranges
-+ * Disables the kernel ranges (enabling protection) for thread
-+ * where thread == (1 << thread number)
-+ */
-+.macro disable_kernel_ranges thread
-+#ifdef CONFIG_PROTECT_KERNEL
-+ not.4 \thread, \thread
-+ and.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Disable Range Register */
-+ and.4 D_RANGE0_EN, D_RANGE0_EN, \thread
-+ and.4 D_RANGE1_EN, D_RANGE1_EN, \thread
-+#endif
-+.endm
-+
-+/*
-+ * disable_kernel_ranges_for_current
-+ * Disable kernel ranges (enabling protection) for this thread
-+ */
-+.macro disable_kernel_ranges_for_current scratch_reg
-+#ifdef CONFIG_PROTECT_KERNEL
-+ thread_get_self_mask \scratch_reg
-+ disable_kernel_ranges \scratch_reg
-+#endif
-+.endm
-+#endif
-+
-+#endif /* _ASM_UBICOM32_RANGE_PROTECT_ASM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/range-protect.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/range-protect.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/range-protect.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/range-protect.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * arch/ubicom32/include/asm/range-protect.h
-+ * Assembly macros declared in C for enabling memory protection.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_RANGE_PROTECT_H
-+#define _ASM_UBICOM32_RANGE_PROTECT_H
-+
-+#if !defined(__ASSEMBLY__)
-+#include <asm/thread.h>
-+/*
-+ * The following macros should be the identical to the ones in
-+ * range-protect-asm.h
-+ *
-+ * You should only use the enable/disable ranges when you have the atomic lock,
-+ * if you do not there will be problems.
-+ */
-+
-+/*
-+ * enable_kernel_ranges
-+ * Enable the kernel ranges (disabling protection) for thread,
-+ * where thread == (1 << thread number)
-+ */
-+asm (
-+ ".macro enable_kernel_ranges thread \n\t"
-+#ifdef CONFIG_PROTECT_KERNEL
-+ " or.4 I_RANGE0_EN, I_RANGE0_EN, \\thread \n\t" /* Enable Range Register */
-+ " or.4 D_RANGE0_EN, D_RANGE0_EN, \\thread \n\t"
-+ " or.4 D_RANGE1_EN, D_RANGE1_EN, \\thread \n\t"
-+#endif
-+ ".endm \n\t"
-+);
-+
-+#else /* __ASSEMBLY__ */
-+
-+#include <asm/range-protect-asm.h>
-+
-+#endif
-+#endif /* _ASM_UBICOM32_RANGE_PROTECT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/resource.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/resource.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/resource.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/resource.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/resource.h
-+ * Generic definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_RESOURCE_H
-+#define _ASM_UBICOM32_RESOURCE_H
-+
-+#include <asm-generic/resource.h>
-+
-+#endif /* _ASM_UBICOM32_RESOURCE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ring_tio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ring_tio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ring_tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ring_tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,42 @@
-+/*
-+ * arch/ubicom32/include/asm/ring_tio.h
-+ * Ubicom32 architecture Ring TIO definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_RING_TIO_H
-+#define _ASM_UBICOM32_RING_TIO_H
-+
-+#include <asm/devtree.h>
-+
-+#define RING_TIO_NODE_VERSION 2
-+
-+/*
-+ * Devtree node for ring
-+ */
-+struct ring_tio_node {
-+ struct devtree_node dn;
-+
-+ u32_t version;
-+ void *regs;
-+};
-+
-+extern void ring_tio_init(const char *node_name);
-+
-+#endif /* _ASM_UBICOM32_RING_TIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/scatterlist.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/scatterlist.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/scatterlist.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/scatterlist.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,49 @@
-+/*
-+ * arch/ubicom32/include/asm/scatterlist.h
-+ * Definitions of struct scatterlist for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SCATTERLIST_H
-+#define _ASM_UBICOM32_SCATTERLIST_H
-+
-+#include <linux/mm.h>
-+#include <asm/types.h>
-+
-+struct scatterlist {
-+#ifdef CONFIG_DEBUG_SG
-+ unsigned long sg_magic;
-+#endif
-+ unsigned long page_link;
-+ unsigned int offset;
-+ dma_addr_t dma_address;
-+ unsigned int length;
-+};
-+
-+#define sg_dma_address(sg) ((sg)->dma_address)
-+#define sg_dma_len(sg) ((sg)->length)
-+
-+#define ISA_DMA_THRESHOLD (0xffffffff)
-+
-+#endif /* _ASM_UBICOM32_SCATTERLIST_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/sd_tio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sd_tio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/sd_tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sd_tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/ubicom32/include/asm/sd_tio.h
-+ * SD TIO definitions
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_SD_TIO_H
-+#define _ASM_UBICOM32_SD_TIO_H
-+
-+#include <asm/devtree.h>
-+
-+/*
-+ * Devtree node for SD
-+ */
-+struct sd_tio_node {
-+ struct devtree_node dn;
-+ void *regs;
-+};
-+
-+#endif /* _ASM_UBICOM32_SD_TIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/sections.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sections.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/sections.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sections.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/sections.h
-+ * Generic sections.h definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SECTIONS_H
-+#define _ASM_UBICOM32_SECTIONS_H
-+
-+#include <asm-generic/sections.h>
-+
-+#endif /* _ASM_UBICOM32_SECTIONS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/segment.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/segment.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/segment.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/segment.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/ubicom32/include/asm/segment.h
-+ * Memory segment definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SEGMENT_H
-+#define _ASM_UBICOM32_SEGMENT_H
-+
-+/* define constants */
-+/* Address spaces (FC0-FC2) */
-+#define USER_DATA (1)
-+#ifndef __USER_DS
-+#define __USER_DS (USER_DATA)
-+#endif
-+#define USER_PROGRAM (2)
-+#define SUPER_DATA (5)
-+#ifndef __KERNEL_DS
-+#define __KERNEL_DS (SUPER_DATA)
-+#endif
-+#define SUPER_PROGRAM (6)
-+#define CPU_SPACE (7)
-+
-+#ifndef __ASSEMBLY__
-+
-+typedef struct {
-+ unsigned long seg;
-+} mm_segment_t;
-+
-+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-+#define USER_DS MAKE_MM_SEG(__USER_DS)
-+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-+
-+/*
-+ * Get/set the SFC/DFC registers for MOVES instructions
-+ */
-+
-+static inline mm_segment_t get_fs(void)
-+{
-+ return USER_DS;
-+}
-+
-+static inline mm_segment_t get_ds(void)
-+{
-+ /* return the supervisor data space code */
-+ return KERNEL_DS;
-+}
-+
-+static inline void set_fs(mm_segment_t val)
-+{
-+}
-+
-+#define segment_eq(a,b) ((a).seg == (b).seg)
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _ASM_UBICOM32_SEGMENT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/semaphore.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/semaphore.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/semaphore.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/semaphore.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,140 @@
-+/*
-+ * arch/ubicom32/include/asm/semaphore.h
-+ * Interrupt-safe semaphores for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * (C) Copyright 1996 Linus Torvalds
-+ * m68k version by Andreas Schwab
-+ * Copyright (C) 2004 Microtronix Datacom Ltd
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SEMAPHORE_H
-+#define _ASM_UBICOM32_SEMAPHORE_H
-+
-+#define RW_LOCK_BIAS 0x01000000
-+
-+#ifndef __ASSEMBLY__
-+
-+#include <linux/linkage.h>
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+#include <linux/rwsem.h>
-+
-+#include <asm/system.h>
-+#include <asm/atomic.h>
-+
-+struct semaphore {
-+ atomic_t count;
-+ atomic_t waking;
-+ wait_queue_head_t wait;
-+};
-+
-+#define __SEMAPHORE_INITIALIZER(name, n) \
-+{ \
-+ .count = ATOMIC_INIT(n), \
-+ .waking = ATOMIC_INIT(0), \
-+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-+}
-+
-+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
-+ struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-+
-+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
-+
-+static inline void sema_init (struct semaphore *sem, int val)
-+{
-+ *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
-+}
-+
-+static inline void init_MUTEX (struct semaphore *sem)
-+{
-+ sema_init(sem, 1);
-+}
-+
-+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-+{
-+ sema_init(sem, 0);
-+}
-+
-+asmlinkage void __down_failed(void /* special register calling convention */);
-+asmlinkage int __down_failed_interruptible(void /* params in registers */);
-+asmlinkage int __down_failed_trylock(void /* params in registers */);
-+asmlinkage void __up_wakeup(void /* special register calling convention */);
-+
-+asmlinkage void __down(struct semaphore * sem);
-+asmlinkage int __down_interruptible(struct semaphore * sem);
-+asmlinkage int __down_trylock(struct semaphore * sem);
-+asmlinkage void __up(struct semaphore * sem);
-+
-+extern spinlock_t semaphore_wake_lock;
-+
-+/*
-+ * This is ugly, but we want the default case to fall through.
-+ * "down_failed" is a special asm handler that calls the C
-+ * routine that actually waits.
-+ */
-+static inline void down(struct semaphore * sem)
-+{
-+ might_sleep();
-+
-+ if (atomic_dec_return(&sem->count) < 0)
-+ __down(sem);
-+}
-+
-+static inline int down_interruptible(struct semaphore * sem)
-+{
-+ int ret = 0;
-+
-+
-+ might_sleep();
-+
-+ if(atomic_dec_return(&sem->count) < 0)
-+ ret = __down_interruptible(sem);
-+ return ret;
-+}
-+
-+static inline int down_trylock(struct semaphore * sem)
-+{
-+ int ret = 0;
-+
-+ if (atomic_dec_return (&sem->count) < 0)
-+ ret = __down_trylock(sem);
-+ return ret;
-+}
-+
-+/*
-+ * Note! This is subtle. We jump to wake people up only if
-+ * the semaphore was negative (== somebody was waiting on it).
-+ * The default case (no contention) will result in NO
-+ * jumps for both down() and up().
-+ */
-+static inline void up(struct semaphore * sem)
-+{
-+ if (atomic_inc_return(&sem->count) <= 0)
-+ __up(sem);
-+}
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _ASM_UBICOM32_SEMAPHORE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/semaphore-helper.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/semaphore-helper.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/semaphore-helper.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/semaphore-helper.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/ubicom32/include/asm/semaphore-helper.h
-+ * Semaphore related definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SEMAPHORE_HELPER_H
-+#define _ASM_UBICOM32_SEMAPHORE_HELPER_H
-+
-+/*
-+ * SMP- and interrupt-safe semaphores helper functions.
-+ *
-+ * (C) Copyright 1996 Linus Torvalds
-+ *
-+ * m68k version by Andreas Schwab
-+ */
-+
-+
-+/*
-+ * These two _must_ execute atomically wrt each other.
-+ */
-+static inline void wake_one_more(struct semaphore * sem)
-+{
-+ atomic_inc(&sem->waking);
-+}
-+
-+static inline int waking_non_zero(struct semaphore *sem)
-+{
-+ int ret;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&semaphore_wake_lock, flags);
-+ ret = 0;
-+ if (atomic_read(&sem->waking) > 0) {
-+ atomic_dec(&sem->waking);
-+ ret = 1;
-+ }
-+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-+ return ret;
-+}
-+
-+/*
-+ * waking_non_zero_interruptible:
-+ * 1 got the lock
-+ * 0 go to sleep
-+ * -EINTR interrupted
-+ */
-+static inline int waking_non_zero_interruptible(struct semaphore *sem,
-+ struct task_struct *tsk)
-+{
-+ int ret;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&semaphore_wake_lock, flags);
-+ ret = 0;
-+ if (atomic_read(&sem->waking) > 0) {
-+ atomic_dec(&sem->waking);
-+ ret = 1;
-+ } else if (signal_pending(tsk)) {
-+ atomic_inc(&sem->count);
-+ ret = -EINTR;
-+ }
-+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-+ return ret;
-+}
-+
-+/*
-+ * waking_non_zero_trylock:
-+ * 1 failed to lock
-+ * 0 got the lock
-+ */
-+static inline int waking_non_zero_trylock(struct semaphore *sem)
-+{
-+ int ret;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&semaphore_wake_lock, flags);
-+ ret = 1;
-+ if (atomic_read(&sem->waking) > 0) {
-+ atomic_dec(&sem->waking);
-+ ret = 0;
-+ } else
-+ atomic_inc(&sem->count);
-+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-+ return ret;
-+}
-+
-+#endif /* _ASM_UBICOM32_SEMAPHORE_HELPER_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/sembuf.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sembuf.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/sembuf.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sembuf.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,52 @@
-+/*
-+ * arch/ubicom32/include/asm/sembuf.h
-+ * The semid64_ds structure for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SEMBUF_H
-+#define _ASM_UBICOM32_SEMBUF_H
-+
-+/*
-+ * The semid64_ds structure for ubicom32 architecture.
-+ * Note extra padding because this structure is passed back and forth
-+ * between kernel and user space.
-+ *
-+ * Pad space is left for:
-+ * - 64-bit time_t to solve y2038 problem
-+ * - 2 miscellaneous 32-bit values
-+ */
-+
-+struct semid64_ds {
-+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-+ __kernel_time_t sem_otime; /* last semop time */
-+ unsigned long __unused1;
-+ __kernel_time_t sem_ctime; /* last change time */
-+ unsigned long __unused2;
-+ unsigned long sem_nsems; /* no. of semaphores in array */
-+ unsigned long __unused3;
-+ unsigned long __unused4;
-+};
-+
-+#endif /* _ASM_UBICOM32_SEMBUF_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/setup.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/setup.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/setup.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/setup.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,35 @@
-+/*
-+ * arch/ubicom32/include/asm/setup.h
-+ * Kernel command line length definition.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_SETUP_H
-+#define _ASM_UBICOM32_SETUP_H
-+
-+#define COMMAND_LINE_SIZE 512
-+
-+#endif /* _ASM_UBICOM32_SETUP_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/shmbuf.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/shmbuf.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/shmbuf.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/shmbuf.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/ubicom32/include/asm/shmbuf.h
-+ * The shmid64_ds structure for the Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SHMBUF_H
-+#define _ASM_UBICOM32_SHMBUF_H
-+
-+/*
-+ * The shmid64_ds structure for m68k architecture.
-+ * Note extra padding because this structure is passed back and forth
-+ * between kernel and user space.
-+ *
-+ * Pad space is left for:
-+ * - 64-bit time_t to solve y2038 problem
-+ * - 2 miscellaneous 32-bit values
-+ */
-+
-+struct shmid64_ds {
-+ struct ipc64_perm shm_perm; /* operation perms */
-+ size_t shm_segsz; /* size of segment (bytes) */
-+ __kernel_time_t shm_atime; /* last attach time */
-+ unsigned long __unused1;
-+ __kernel_time_t shm_dtime; /* last detach time */
-+ unsigned long __unused2;
-+ __kernel_time_t shm_ctime; /* last change time */
-+ unsigned long __unused3;
-+ __kernel_pid_t shm_cpid; /* pid of creator */
-+ __kernel_pid_t shm_lpid; /* pid of last operator */
-+ unsigned long shm_nattch; /* no. of current attaches */
-+ unsigned long __unused4;
-+ unsigned long __unused5;
-+};
-+
-+struct shminfo64 {
-+ unsigned long shmmax;
-+ unsigned long shmmin;
-+ unsigned long shmmni;
-+ unsigned long shmseg;
-+ unsigned long shmall;
-+ unsigned long __unused1;
-+ unsigned long __unused2;
-+ unsigned long __unused3;
-+ unsigned long __unused4;
-+};
-+
-+#endif /* _ASM_UBICOM32_SHMBUF_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/shmparam.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/shmparam.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/shmparam.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/shmparam.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,35 @@
-+/*
-+ * arch/ubicom32/include/asm/shmparam.h
-+ * Shared memory definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2004 Microtronix Datacom Ltd
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ * Alpha, ix86, M68K, Sparc, ...et al
-+ */
-+#ifndef _ASM_UBICOM32_SHMPARAM_H
-+#define _ASM_UBICOM32_SHMPARAM_H
-+
-+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-+
-+#endif /* _ASM_UBICOM32_SHMPARAM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/sigcontext.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sigcontext.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/sigcontext.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sigcontext.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,37 @@
-+/*
-+ * arch/ubicom32/include/asm/sigcontext.h
-+ * Definition of sigcontext struct for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SIGCONTEXT_H
-+#define _ASM_UBICOM32_SIGCONTEXT_H
-+
-+#include <asm/ptrace.h>
-+
-+struct sigcontext {
-+ struct pt_regs sc_regs;
-+};
-+
-+#endif /* _ASM_UBICOM32_SIGCONTEXT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/siginfo.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/siginfo.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/siginfo.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/siginfo.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/siginfo.h
-+ * Generic siginfo.h definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SIGINFO_H
-+#define _ASM_UBICOM32_SIGINFO_H
-+
-+#include <asm-generic/siginfo.h>
-+
-+#endif /* _ASM_UBICOM32_SIGINFO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/signal.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/signal.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/signal.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/signal.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,180 @@
-+/*
-+ * arch/ubicom32/include/asm/signal.h
-+ * Signal related definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SIGNAL_H
-+#define _ASM_UBICOM32_SIGNAL_H
-+
-+#include <linux/types.h>
-+
-+/* Avoid too many header ordering problems. */
-+struct siginfo;
-+
-+#ifdef __KERNEL__
-+/* Most things should be clean enough to redefine this at will, if care
-+ is taken to make libc match. */
-+
-+#define _NSIG 64
-+#define _NSIG_BPW 32
-+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-+
-+typedef unsigned long old_sigset_t; /* at least 32 bits */
-+
-+typedef struct {
-+ unsigned long sig[_NSIG_WORDS];
-+} sigset_t;
-+
-+#endif /* __KERNEL__ */
-+
-+#define SIGHUP 1
-+#define SIGINT 2
-+#define SIGQUIT 3
-+#define SIGILL 4
-+#define SIGTRAP 5
-+#define SIGABRT 6
-+#define SIGIOT 6
-+#define SIGBUS 7
-+#define SIGFPE 8
-+#define SIGKILL 9
-+#define SIGUSR1 10
-+#define SIGSEGV 11
-+#define SIGUSR2 12
-+#define SIGPIPE 13
-+#define SIGALRM 14
-+#define SIGTERM 15
-+#define SIGSTKFLT 16
-+#define SIGCHLD 17
-+#define SIGCONT 18
-+#define SIGSTOP 19
-+#define SIGTSTP 20
-+#define SIGTTIN 21
-+#define SIGTTOU 22
-+#define SIGURG 23
-+#define SIGXCPU 24
-+#define SIGXFSZ 25
-+#define SIGVTALRM 26
-+#define SIGPROF 27
-+#define SIGWINCH 28
-+#define SIGIO 29
-+#define SIGPOLL SIGIO
-+/*
-+#define SIGLOST 29
-+*/
-+#define SIGPWR 30
-+#define SIGSYS 31
-+#define SIGUNUSED 31
-+
-+/* These should not be considered constants from userland. */
-+#define SIGRTMIN 32
-+#define SIGRTMAX _NSIG
-+
-+/*
-+ * SA_FLAGS values:
-+ *
-+ * SA_ONSTACK indicates that a registered stack_t will be used.
-+ * SA_RESTART flag to get restarting signals (which were the default long ago)
-+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
-+ * SA_RESETHAND clears the handler when the signal is delivered.
-+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
-+ * SA_NODEFER prevents the current signal from being masked in the handler.
-+ *
-+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
-+ * Unix names RESETHAND and NODEFER respectively.
-+ */
-+#define SA_NOCLDSTOP 0x00000001
-+#define SA_NOCLDWAIT 0x00000002
-+#define SA_SIGINFO 0x00000004
-+#define SA_ONSTACK 0x08000000
-+#define SA_RESTART 0x10000000
-+#define SA_NODEFER 0x40000000
-+#define SA_RESETHAND 0x80000000
-+
-+#define SA_NOMASK SA_NODEFER
-+#define SA_ONESHOT SA_RESETHAND
-+
-+/*
-+ * sigaltstack controls
-+ */
-+#define SS_ONSTACK 1
-+#define SS_DISABLE 2
-+
-+#define MINSIGSTKSZ 2048
-+#define SIGSTKSZ 8192
-+
-+#include <asm-generic/signal.h>
-+
-+#ifdef __KERNEL__
-+struct old_sigaction {
-+ __sighandler_t sa_handler;
-+ old_sigset_t sa_mask;
-+ unsigned long sa_flags;
-+ void (*sa_restorer)(void);
-+};
-+
-+struct sigaction {
-+ __sighandler_t sa_handler;
-+ unsigned long sa_flags;
-+ void (*sa_restorer)(void);
-+ sigset_t sa_mask; /* mask last for extensibility */
-+};
-+
-+struct k_sigaction {
-+ struct sigaction sa;
-+};
-+#else
-+/* Here we must cater to libcs that poke about in kernel headers. */
-+
-+struct sigaction {
-+ union {
-+ __sighandler_t _sa_handler;
-+ void (*_sa_sigaction)(int, struct siginfo *, void *);
-+ } _u;
-+ sigset_t sa_mask;
-+ unsigned long sa_flags;
-+ void (*sa_restorer)(void);
-+};
-+
-+#define sa_handler _u._sa_handler
-+#define sa_sigaction _u._sa_sigaction
-+
-+#endif /* __KERNEL__ */
-+
-+typedef struct sigaltstack {
-+ void *ss_sp;
-+ int ss_flags;
-+ size_t ss_size;
-+} stack_t;
-+
-+#ifdef __KERNEL__
-+
-+#include <asm/sigcontext.h>
-+#undef __HAVE_ARCH_SIG_BITOPS
-+
-+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_UBICOM32_SIGNAL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/smp.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/smp.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/smp.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/smp.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,87 @@
-+/*
-+ * arch/ubicom32/include/asm/smp.h
-+ * SMP definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SMP_H
-+#define _ASM_UBICOM32_SMP_H
-+
-+#ifndef CONFIG_SMP
-+#error you should not include smp.h if smp is off
-+#endif
-+
-+#ifndef ASSEMBLY
-+#include <linux/bitops.h>
-+#include <linux/threads.h>
-+#include <linux/cpumask.h>
-+#include <asm/ip5000.h>
-+
-+typedef unsigned long address_t;
-+extern unsigned int smp_ipi_irq;
-+
-+/*
-+ * This magic constant controls our willingness to transfer
-+ * a process across CPUs.
-+ *
-+ * Such a transfer incurs cache and tlb
-+ * misses. The current value is inherited from i386. Still needs
-+ * to be tuned for parisc.
-+ */
-+#define PROC_CHANGE_PENALTY 15 /* Schedule penalty */
-+#define NO_PROC_ID 0xFF /* No processor magic marker */
-+#define ANY_PROC_ID 0xFF /* Any processor magic marker */
-+
-+#ifdef CONFIG_SMP
-+#define raw_smp_processor_id() (current_thread_info()->cpu)
-+#endif /* CONFIG_SMP */
-+
-+static inline int __cpu_disable (void)
-+{
-+ return 0;
-+}
-+
-+static inline void __cpu_die (unsigned int cpu)
-+{
-+ while(1) {
-+ };
-+}
-+
-+extern int __cpu_up(unsigned int cpu);
-+extern void smp_send_timer_all(void);
-+extern void smp_timer_broadcast(const struct cpumask *mask);
-+extern void smp_set_affinity(unsigned int irq, const struct cpumask *dest);
-+extern void arch_send_call_function_single_ipi(int cpu);
-+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
-+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-+
-+/*
-+ * TODO: Once these are fully tested, we should turn them into
-+ * inline macros for performance.
-+ */
-+extern unsigned long smp_get_affinity(unsigned int irq, int *all);
-+extern void smp_reset_ipi(unsigned long mask);
-+
-+#endif /* !ASSEMBLY */
-+#endif /* _ASM_UBICOM32_SMP_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/socket.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/socket.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/socket.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/socket.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,87 @@
-+/*
-+ * arch/ubicom32/include/asm/socket.h
-+ * Socket options definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SOCKET_H
-+#define _ASM_UBICOM32_SOCKET_H
-+
-+#include <asm/sockios.h>
-+
-+/* For setsockopt(2) */
-+#define SOL_SOCKET 1
-+
-+#define SO_DEBUG 1
-+#define SO_REUSEADDR 2
-+#define SO_TYPE 3
-+#define SO_ERROR 4
-+#define SO_DONTROUTE 5
-+#define SO_BROADCAST 6
-+#define SO_SNDBUF 7
-+#define SO_RCVBUF 8
-+#define SO_SNDBUFFORCE 32
-+#define SO_RCVBUFFORCE 33
-+#define SO_KEEPALIVE 9
-+#define SO_OOBINLINE 10
-+#define SO_NO_CHECK 11
-+#define SO_PRIORITY 12
-+#define SO_LINGER 13
-+#define SO_BSDCOMPAT 14
-+/* To add :#define SO_REUSEPORT 15 */
-+#define SO_PASSCRED 16
-+#define SO_PEERCRED 17
-+#define SO_RCVLOWAT 18
-+#define SO_SNDLOWAT 19
-+#define SO_RCVTIMEO 20
-+#define SO_SNDTIMEO 21
-+
-+/* Security levels - as per NRL IPv6 - don't actually do anything */
-+#define SO_SECURITY_AUTHENTICATION 22
-+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-+#define SO_SECURITY_ENCRYPTION_NETWORK 24
-+
-+#define SO_BINDTODEVICE 25
-+
-+/* Socket filtering */
-+#define SO_ATTACH_FILTER 26
-+#define SO_DETACH_FILTER 27
-+
-+#define SO_PEERNAME 28
-+#define SO_TIMESTAMP 29
-+#define SCM_TIMESTAMP SO_TIMESTAMP
-+
-+#define SO_ACCEPTCONN 30
-+
-+#define SO_PEERSEC 31
-+#define SO_PASSSEC 34
-+#define SO_TIMESTAMPNS 35
-+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-+
-+#define SO_MARK 36
-+
-+#define SO_TIMESTAMPING 37
-+#define SCM_TIMESTAMPING SO_TIMESTAMPING
-+
-+#endif /* _ASM_UBICOM32_SOCKET_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/sockios.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sockios.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/sockios.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/sockios.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,40 @@
-+/*
-+ * arch/ubicom32/include/asm/sockios.h
-+ * Socket-level ioctl definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SOCKIOS_H
-+#define _ASM_UBICOM32_SOCKIOS_H
-+
-+/* Socket-level I/O control calls. */
-+#define FIOSETOWN 0x8901
-+#define SIOCSPGRP 0x8902
-+#define FIOGETOWN 0x8903
-+#define SIOCGPGRP 0x8904
-+#define SIOCATMARK 0x8905
-+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-+
-+#endif /* _ASM_UBICOM32_SOCKIOS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/spinlock.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/spinlock.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/spinlock.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/spinlock.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,296 @@
-+/*
-+ * arch/ubicom32/include/asm/spinlock.h
-+ * Spinlock related definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SPINLOCK_H
-+#define _ASM_UBICOM32_SPINLOCK_H
-+
-+#include <asm/system.h>
-+#include <asm/processor.h>
-+#include <asm/spinlock_types.h>
-+
-+/*
-+ * __raw_spin_lock()
-+ * Lock the lock.
-+ */
-+static inline void __raw_spin_lock(raw_spinlock_t *x)
-+{
-+ asm volatile (
-+ "1: bset %0, %0, #0 \n\t"
-+ " jmpne.f 1b \n\t"
-+ : "+U4" (x->lock)
-+ :
-+ : "memory", "cc"
-+ );
-+}
-+
-+/*
-+ * __raw_spin_unlock()
-+ * Unlock the lock.
-+ */
-+static inline void __raw_spin_unlock(raw_spinlock_t *x)
-+{
-+ asm volatile (
-+ " bclr %0, %0, #0 \n\t"
-+ : "+U4" (x->lock)
-+ :
-+ : "memory", "cc"
-+ );
-+}
-+
-+/*
-+ * __raw_spin_is_locked()
-+ * Test if the lock is locked.
-+ */
-+static inline int __raw_spin_is_locked(raw_spinlock_t *x)
-+{
-+ return x->lock;
-+}
-+
-+/*
-+ * __raw_spin_unlock_wait()
-+ * Wait for the lock to be unlocked.
-+ *
-+ * Note: the caller has not guarantee that the lock will not
-+ * be acquired before they get to it.
-+ */
-+static inline void __raw_spin_unlock_wait(raw_spinlock_t *x)
-+{
-+ do {
-+ cpu_relax();
-+ } while (__raw_spin_is_locked(x));
-+}
-+
-+/*
-+ * __raw_spin_trylock()
-+ * Try the lock, return 0 on failure, 1 on success.
-+ */
-+static inline int __raw_spin_trylock(raw_spinlock_t *x)
-+{
-+ int ret = 0;
-+
-+ asm volatile (
-+ " bset %1, %1, #0 \n\t"
-+ " jmpne.f 1f \n\t"
-+ " move.4 %0, #1 \n\t"
-+ "1: \n\t"
-+ : "+r" (ret), "+U4" (x->lock)
-+ :
-+ : "memory", "cc"
-+ );
-+
-+ return ret;
-+}
-+
-+/*
-+ * __raw_spin_lock_flags()
-+ * Spin waiting for the lock (enabling IRQ(s))
-+ */
-+static inline void __raw_spin_lock_flags(raw_spinlock_t *x, unsigned long flags)
-+{
-+ mb();
-+ while (!__raw_spin_trylock(x)) {
-+ /*
-+ * If the flags from the IRQ are set, interrupts are disabled and we
-+ * need to re-enable them.
-+ */
-+ if (!flags) {
-+ cpu_relax();
-+ } else {
-+ raw_local_irq_enable();
-+ cpu_relax();
-+ raw_local_irq_disable();
-+ }
-+ }
-+ mb();
-+}
-+
-+/*
-+ * Read-write spinlocks, allowing multiple readers but only one writer.
-+ * Linux rwlocks are unfair to writers; they can be starved for an indefinite
-+ * time by readers. With care, they can also be taken in interrupt context.
-+ *
-+ * In Ubicom32 architecture implementation, we have a spinlock and a counter.
-+ * Readers use the lock to serialise their access to the counter (which
-+ * records how many readers currently hold the lock).
-+ * Writers hold the spinlock, preventing any readers or other writers from
-+ * grabbing the rwlock.
-+ */
-+
-+/*
-+ * __raw_read_lock()
-+ * Increment the counter in the rwlock.
-+ *
-+ * Note that we have to ensure interrupts are disabled in case we're
-+ * interrupted by some other code that wants to grab the same read lock
-+ */
-+static inline void __raw_read_lock(raw_rwlock_t *rw)
-+{
-+ unsigned long flags;
-+ raw_local_irq_save(flags);
-+ __raw_spin_lock_flags(&rw->lock, flags);
-+ rw->counter++;
-+ __raw_spin_unlock(&rw->lock);
-+ raw_local_irq_restore(flags);
-+}
-+
-+/*
-+ * __raw_read_unlock()
-+ * Decrement the counter.
-+ *
-+ * Note that we have to ensure interrupts are disabled in case we're
-+ * interrupted by some other code that wants to grab the same read lock
-+ */
-+static inline void __raw_read_unlock(raw_rwlock_t *rw)
-+{
-+ unsigned long flags;
-+ raw_local_irq_save(flags);
-+ __raw_spin_lock_flags(&rw->lock, flags);
-+ rw->counter--;
-+ __raw_spin_unlock(&rw->lock);
-+ raw_local_irq_restore(flags);
-+}
-+
-+/*
-+ * __raw_read_trylock()
-+ * Increment the counter if we can.
-+ *
-+ * Note that we have to ensure interrupts are disabled in case we're
-+ * interrupted by some other code that wants to grab the same read lock
-+ */
-+static inline int __raw_read_trylock(raw_rwlock_t *rw)
-+{
-+ unsigned long flags;
-+ retry:
-+ raw_local_irq_save(flags);
-+ if (__raw_spin_trylock(&rw->lock)) {
-+ rw->counter++;
-+ __raw_spin_unlock(&rw->lock);
-+ raw_local_irq_restore(flags);
-+ return 1;
-+ }
-+
-+ raw_local_irq_restore(flags);
-+
-+ /*
-+ * If write-locked, we fail to acquire the lock
-+ */
-+ if (rw->counter < 0) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Wait until we have a realistic chance at the lock
-+ */
-+ while (__raw_spin_is_locked(&rw->lock) && rw->counter >= 0) {
-+ cpu_relax();
-+ }
-+
-+ goto retry;
-+}
-+
-+/*
-+ * __raw_write_lock()
-+ *
-+ * Note that we have to ensure interrupts are disabled in case we're
-+ * interrupted by some other code that wants to read_trylock() this lock
-+ */
-+static inline void __raw_write_lock(raw_rwlock_t *rw)
-+{
-+ unsigned long flags;
-+retry:
-+ raw_local_irq_save(flags);
-+ __raw_spin_lock_flags(&rw->lock, flags);
-+
-+ if (rw->counter != 0) {
-+ __raw_spin_unlock(&rw->lock);
-+ raw_local_irq_restore(flags);
-+
-+ while (rw->counter != 0)
-+ cpu_relax();
-+
-+ goto retry;
-+ }
-+
-+ rw->counter = -1; /* mark as write-locked */
-+ mb();
-+ raw_local_irq_restore(flags);
-+}
-+
-+static inline void __raw_write_unlock(raw_rwlock_t *rw)
-+{
-+ rw->counter = 0;
-+ __raw_spin_unlock(&rw->lock);
-+}
-+
-+/* Note that we have to ensure interrupts are disabled in case we're
-+ * interrupted by some other code that wants to read_trylock() this lock */
-+static inline int __raw_write_trylock(raw_rwlock_t *rw)
-+{
-+ unsigned long flags;
-+ int result = 0;
-+
-+ raw_local_irq_save(flags);
-+ if (__raw_spin_trylock(&rw->lock)) {
-+ if (rw->counter == 0) {
-+ rw->counter = -1;
-+ result = 1;
-+ } else {
-+ /* Read-locked. Oh well. */
-+ __raw_spin_unlock(&rw->lock);
-+ }
-+ }
-+ raw_local_irq_restore(flags);
-+
-+ return result;
-+}
-+
-+/*
-+ * read_can_lock - would read_trylock() succeed?
-+ * @lock: the rwlock in question.
-+ */
-+static inline int __raw_read_can_lock(raw_rwlock_t *rw)
-+{
-+ return rw->counter >= 0;
-+}
-+
-+/*
-+ * write_can_lock - would write_trylock() succeed?
-+ * @lock: the rwlock in question.
-+ */
-+static inline int __raw_write_can_lock(raw_rwlock_t *rw)
-+{
-+ return !rw->counter;
-+}
-+
-+#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
-+#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
-+
-+#define _raw_spin_relax(lock) cpu_relax()
-+#define _raw_read_relax(lock) cpu_relax()
-+#define _raw_write_relax(lock) cpu_relax()
-+
-+#endif /* _ASM_UBICOM32_SPINLOCK_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/spinlock_types.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/spinlock_types.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/spinlock_types.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/spinlock_types.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,43 @@
-+/*
-+ * arch/ubicom32/include/asm/spinlock_types.h
-+ * Spinlock related structure definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SPINLOCK_TYPES_H
-+#define _ASM_UBICOM32_SPINLOCK_TYPES_H
-+
-+typedef struct {
-+ volatile unsigned int lock;
-+} raw_spinlock_t;
-+
-+typedef struct {
-+ raw_spinlock_t lock;
-+ volatile int counter;
-+} raw_rwlock_t;
-+
-+#define __RAW_SPIN_LOCK_UNLOCKED { 0 }
-+#define __RAW_RW_LOCK_UNLOCKED { __RAW_SPIN_LOCK_UNLOCKED, 0 }
-+
-+#endif /* _ASM_UBICOM32_SPINLOCK_TYPES_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/stacktrace.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/stacktrace.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/stacktrace.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/stacktrace.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,72 @@
-+/*
-+ * arch/ubicom32/include/asm/stacktrace.h
-+ * Stacktrace functions for the Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_STACKTRACE_H
-+#define _ASM_UBICOM32_STACKTRACE_H
-+
-+#define between(a, b, c) (( \
-+ ((unsigned long) a) >= ((unsigned long) b)) && \
-+ (((unsigned long)a) <= ((unsigned long)c)))
-+
-+/*
-+ * These symbols are filled in by the linker.
-+ */
-+extern unsigned long _stext;
-+extern unsigned long _etext;
-+
-+/* OCM text goes from __ocm_text_run_begin to __data_begin */
-+extern unsigned long __ocm_text_run_begin;
-+extern unsigned long __data_begin;
-+
-+/* Account for OCM case - see stacktrace.c maybe combine(also trap.c) */
-+/*
-+ * ubicom32_is_kernel()
-+ *
-+ * Check to see if the given address belongs to the kernel.
-+ * NOMMU does not permit any other means.
-+ */
-+static inline int ubicom32_is_kernel(unsigned long addr)
-+{
-+ int is_kernel = between(addr, &_stext, &_etext) || \
-+ between(addr, &__ocm_text_run_begin, &__data_begin);
-+
-+#ifdef CONFIG_MODULES
-+ if (!is_kernel)
-+ is_kernel = is_module_address(addr);
-+#endif
-+ return is_kernel;
-+}
-+
-+extern unsigned long stacktrace_iterate(
-+ unsigned long **trace,
-+ unsigned long stext, unsigned long etext,
-+ unsigned long ocm_stext, unsigned long ocm_etext,
-+ unsigned long sstack, unsigned long estack);
-+#ifdef CONFIG_STACKTRACE
-+void stacktrace_save_entries(struct task_struct *tsk, struct stack_trace *trace, unsigned long sp);
-+#endif
-+#endif /* _ASM_UBICOM32_STACKTRACE_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/statfs.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/statfs.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/statfs.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/statfs.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/statfs.h
-+ * Generic statfs.h definitions
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_STATFS_H
-+#define _ASM_UBICOM32_STATFS_H
-+
-+#include <asm-generic/statfs.h>
-+
-+#endif /* _ASM_UBICOM32_STATFS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/stat.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/stat.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/stat.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/stat.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,104 @@
-+/*
-+ * arch/ubicom32/include/asm/stat.h
-+ * File status definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_STAT_H
-+#define _ASM_UBICOM32_STAT_H
-+
-+struct __old_kernel_stat {
-+ unsigned short st_dev;
-+ unsigned short st_ino;
-+ unsigned short st_mode;
-+ unsigned short st_nlink;
-+ unsigned short st_uid;
-+ unsigned short st_gid;
-+ unsigned short st_rdev;
-+ unsigned long st_size;
-+ unsigned long st_atime;
-+ unsigned long st_mtime;
-+ unsigned long st_ctime;
-+};
-+
-+struct stat {
-+ unsigned short st_dev;
-+ unsigned short __pad1;
-+ unsigned long st_ino;
-+ unsigned short st_mode;
-+ unsigned short st_nlink;
-+ unsigned short st_uid;
-+ unsigned short st_gid;
-+ unsigned short st_rdev;
-+ unsigned short __pad2;
-+ unsigned long st_size;
-+ unsigned long st_blksize;
-+ unsigned long st_blocks;
-+ unsigned long st_atime;
-+ unsigned long __unused1;
-+ unsigned long st_mtime;
-+ unsigned long __unused2;
-+ unsigned long st_ctime;
-+ unsigned long __unused3;
-+ unsigned long __unused4;
-+ unsigned long __unused5;
-+};
-+
-+/* This matches struct stat64 in glibc2.1, hence the absolutely
-+ * insane amounts of padding around dev_t's.
-+ */
-+struct stat64 {
-+ unsigned long long st_dev;
-+ unsigned char __pad1[2];
-+
-+#define STAT64_HAS_BROKEN_ST_INO 1
-+ unsigned long __st_ino;
-+
-+ unsigned int st_mode;
-+ unsigned int st_nlink;
-+
-+ unsigned long st_uid;
-+ unsigned long st_gid;
-+
-+ unsigned long long st_rdev;
-+ unsigned char __pad3[2];
-+
-+ long long st_size;
-+ unsigned long st_blksize;
-+
-+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
-+
-+ unsigned long st_atime;
-+ unsigned long st_atime_nsec;
-+
-+ unsigned long st_mtime;
-+ unsigned long st_mtime_nsec;
-+
-+ unsigned long st_ctime;
-+ unsigned long st_ctime_nsec;
-+
-+ unsigned long long st_ino;
-+};
-+
-+#endif /* _ASM_UBICOM32_STAT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/string.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/string.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/string.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/string.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,40 @@
-+/*
-+ * arch/ubicom32/include/asm/string.h
-+ * String operation definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_STRING_H
-+#define _ASM_UBICOM32_STRING_H
-+
-+#define __HAVE_ARCH_MEMSET
-+extern void *memset(void *b, int c, size_t len);
-+
-+#define __HAVE_ARCH_MEMCPY
-+extern void *memcpy(void *to, const void *from, size_t len);
-+
-+#define __HAVE_ARCH_MEMMOVE
-+extern void * memmove(void *to, const void *from, size_t len);
-+
-+#endif /* _ASM_UBICOM32_STRING_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/swab.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/swab.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/swab.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/swab.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,45 @@
-+/*
-+ * arch/ubicom32/include/asm/byteorder.h
-+ * Byte order swapping utility routines.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_BYTEORDER_H
-+#define _ASM_UBICOM32_BYTEORDER_H
-+
-+#include <linux/types.h>
-+
-+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-+# define __BYTEORDER_HAS_U64__
-+# define __SWAB_64_THRU_32__
-+#endif
-+
-+#if defined(IP7000) || defined(IP7000_REV2)
-+
-+#define __arch__swab16 __builtin_ubicom32_swapb_2
-+#define __arch__swab32 __builtin_ubicom32_swapb_4
-+
-+#endif /* IP7000 */
-+
-+#endif /* _ASM_UBICOM32_BYTEORDER_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/switch-dev.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/switch-dev.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/switch-dev.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/switch-dev.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,51 @@
-+/*
-+ * arch/ubicom32/include/asm/switch-dev.h
-+ * generic Ethernet switch platform data definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SWITCH_DEV_H
-+#define _ASM_UBICOM32_SWITCH_DEV_H
-+
-+#define SWITCH_DEV_FLAG_HW_RESET 0x01
-+#define SWITCH_DEV_FLAG_SW_RESET 0x02
-+
-+struct switch_core_platform_data {
-+ /*
-+ * See flags above
-+ */
-+ u32_t flags;
-+
-+ /*
-+ * GPIO to use for nReset
-+ */
-+ int pin_reset;
-+
-+ /*
-+ * Name of this switch
-+ */
-+ const char *name;
-+};
-+
-+#endif /* _ASM_UBICOM32_SWITCH_DEV_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/system.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/system.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/system.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/system.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,101 @@
-+/*
-+ * arch/ubicom32/include/asm/system.h
-+ * Low level switching definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_SYSTEM_H
-+#define _ASM_UBICOM32_SYSTEM_H
-+
-+#include <linux/irqflags.h>
-+#include <linux/linkage.h>
-+#include <asm/segment.h>
-+#include <asm/entry.h>
-+#include <asm/ldsr.h>
-+#include <asm/irq.h>
-+#include <asm/percpu.h>
-+#include <asm/ubicom32-common.h>
-+#include <asm/processor.h>
-+
-+/*
-+ * switch_to(n) should switch tasks to task ptr, first checking that
-+ * ptr isn't the current task, in which case it does nothing.
-+ */
-+asmlinkage void resume(void);
-+extern void *__switch_to(struct task_struct *prev,
-+ struct thread_struct *prev_switch,
-+ struct thread_struct *next_switch);
-+
-+/*
-+ * We will need a per linux thread sw_ksp for the switch_to macro to
-+ * track the kernel stack pointer for the current thread on that linux thread.
-+ */
-+#define switch_to(prev,next,last) \
-+({ \
-+ void *_last; \
-+ _last = (void *) \
-+ __switch_to(prev, &prev->thread, &next->thread); \
-+ (last) = _last; \
-+})
-+
-+/*
-+ * Force strict CPU ordering.
-+ * Not really required on ubicom32...
-+ */
-+#define nop() asm volatile ("nop"::)
-+#define mb() asm volatile ("" : : :"memory")
-+#define rmb() asm volatile ("" : : :"memory")
-+#define wmb() asm volatile ("" : : :"memory")
-+#define set_mb(var, value) ({ (var) = (value); wmb(); })
-+
-+#ifdef CONFIG_SMP
-+#define smp_mb() mb()
-+#define smp_rmb() rmb()
-+#define smp_wmb() wmb()
-+#define smp_read_barrier_depends() read_barrier_depends()
-+#else
-+#define smp_mb() mb()
-+#define smp_rmb() rmb()
-+#define smp_wmb() wmb()
-+#define smp_read_barrier_depends() do { } while(0)
-+#endif
-+
-+#define read_barrier_depends() ((void)0)
-+
-+/*
-+ * The following defines change how the scheduler calls the switch_to()
-+ * macro.
-+ *
-+ * 1) The first causes the runqueue to be unlocked on entry to
-+ * switch_to(). Since our ctx code does not play with the runqueue
-+ * we do not need it unlocked.
-+ *
-+ * 2) The later turns interrupts on during a ctxsw to reduce the latency of
-+ * interrupts during ctx. At this point in the port, we believe that this
-+ * latency is not a problem since we have very little code to perform a ctxsw.
-+ */
-+// #define __ARCH_WANT_UNLOCKED_CTXSW
-+// #define __ARCH_WANT_INTERRUPTS_ON_CTXSW
-+
-+#endif /* _ASM_UBICOM32_SYSTEM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/termbits.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/termbits.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/termbits.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/termbits.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,227 @@
-+/*
-+ * arch/ubicom32/include/asm/termbits.h
-+ * Terminal/serial port definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TERMBITS_H
-+#define _ASM_UBICOM32_TERMBITS_H
-+
-+#include <linux/posix_types.h>
-+
-+typedef unsigned char cc_t;
-+typedef unsigned int speed_t;
-+typedef unsigned int tcflag_t;
-+
-+#define NCCS 19
-+struct termios {
-+ tcflag_t c_iflag; /* input mode flags */
-+ tcflag_t c_oflag; /* output mode flags */
-+ tcflag_t c_cflag; /* control mode flags */
-+ tcflag_t c_lflag; /* local mode flags */
-+ cc_t c_line; /* line discipline */
-+ cc_t c_cc[NCCS]; /* control characters */
-+};
-+
-+struct termios2 {
-+ tcflag_t c_iflag; /* input mode flags */
-+ tcflag_t c_oflag; /* output mode flags */
-+ tcflag_t c_cflag; /* control mode flags */
-+ tcflag_t c_lflag; /* local mode flags */
-+ cc_t c_line; /* line discipline */
-+ cc_t c_cc[NCCS]; /* control characters */
-+ speed_t c_ispeed; /* input speed */
-+ speed_t c_ospeed; /* output speed */
-+};
-+
-+struct ktermios {
-+ tcflag_t c_iflag; /* input mode flags */
-+ tcflag_t c_oflag; /* output mode flags */
-+ tcflag_t c_cflag; /* control mode flags */
-+ tcflag_t c_lflag; /* local mode flags */
-+ cc_t c_line; /* line discipline */
-+ cc_t c_cc[NCCS]; /* control characters */
-+ speed_t c_ispeed; /* input speed */
-+ speed_t c_ospeed; /* output speed */
-+};
-+
-+/* c_cc characters */
-+#define VINTR 0
-+#define VQUIT 1
-+#define VERASE 2
-+#define VKILL 3
-+#define VEOF 4
-+#define VTIME 5
-+#define VMIN 6
-+#define VSWTC 7
-+#define VSTART 8
-+#define VSTOP 9
-+#define VSUSP 10
-+#define VEOL 11
-+#define VREPRINT 12
-+#define VDISCARD 13
-+#define VWERASE 14
-+#define VLNEXT 15
-+#define VEOL2 16
-+
-+
-+/* c_iflag bits */
-+#define IGNBRK 0000001
-+#define BRKINT 0000002
-+#define IGNPAR 0000004
-+#define PARMRK 0000010
-+#define INPCK 0000020
-+#define ISTRIP 0000040
-+#define INLCR 0000100
-+#define IGNCR 0000200
-+#define ICRNL 0000400
-+#define IUCLC 0001000
-+#define IXON 0002000
-+#define IXANY 0004000
-+#define IXOFF 0010000
-+#define IMAXBEL 0020000
-+#define IUTF8 0040000
-+
-+/* c_oflag bits */
-+#define OPOST 0000001
-+#define OLCUC 0000002
-+#define ONLCR 0000004
-+#define OCRNL 0000010
-+#define ONOCR 0000020
-+#define ONLRET 0000040
-+#define OFILL 0000100
-+#define OFDEL 0000200
-+#define NLDLY 0000400
-+#define NL0 0000000
-+#define NL1 0000400
-+#define CRDLY 0003000
-+#define CR0 0000000
-+#define CR1 0001000
-+#define CR2 0002000
-+#define CR3 0003000
-+#define TABDLY 0014000
-+#define TAB0 0000000
-+#define TAB1 0004000
-+#define TAB2 0010000
-+#define TAB3 0014000
-+#define XTABS 0014000
-+#define BSDLY 0020000
-+#define BS0 0000000
-+#define BS1 0020000
-+#define VTDLY 0040000
-+#define VT0 0000000
-+#define VT1 0040000
-+#define FFDLY 0100000
-+#define FF0 0000000
-+#define FF1 0100000
-+
-+/* c_cflag bit meaning */
-+#define CBAUD 0010017
-+#define B0 0000000 /* hang up */
-+#define B50 0000001
-+#define B75 0000002
-+#define B110 0000003
-+#define B134 0000004
-+#define B150 0000005
-+#define B200 0000006
-+#define B300 0000007
-+#define B600 0000010
-+#define B1200 0000011
-+#define B1800 0000012
-+#define B2400 0000013
-+#define B4800 0000014
-+#define B9600 0000015
-+#define B19200 0000016
-+#define B38400 0000017
-+#define EXTA B19200
-+#define EXTB B38400
-+#define CSIZE 0000060
-+#define CS5 0000000
-+#define CS6 0000020
-+#define CS7 0000040
-+#define CS8 0000060
-+#define CSTOPB 0000100
-+#define CREAD 0000200
-+#define PARENB 0000400
-+#define PARODD 0001000
-+#define HUPCL 0002000
-+#define CLOCAL 0004000
-+#define CBAUDEX 0010000
-+#define BOTHER 0010000
-+#define B57600 0010001
-+#define B115200 0010002
-+#define B230400 0010003
-+#define B460800 0010004
-+#define B500000 0010005
-+#define B576000 0010006
-+#define B921600 0010007
-+#define B1000000 0010010
-+#define B1152000 0010011
-+#define B1500000 0010012
-+#define B2000000 0010013
-+#define B2500000 0010014
-+#define B3000000 0010015
-+#define B3500000 0010016
-+#define B4000000 0010017
-+#define CIBAUD 002003600000 /* input baud rate */
-+#define CMSPAR 010000000000 /* mark or space (stick) parity */
-+#define CRTSCTS 020000000000 /* flow control */
-+
-+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-+
-+/* c_lflag bits */
-+#define ISIG 0000001
-+#define ICANON 0000002
-+#define XCASE 0000004
-+#define ECHO 0000010
-+#define ECHOE 0000020
-+#define ECHOK 0000040
-+#define ECHONL 0000100
-+#define NOFLSH 0000200
-+#define TOSTOP 0000400
-+#define ECHOCTL 0001000
-+#define ECHOPRT 0002000
-+#define ECHOKE 0004000
-+#define FLUSHO 0010000
-+#define PENDIN 0040000
-+#define IEXTEN 0100000
-+
-+
-+/* tcflow() and TCXONC use these */
-+#define TCOOFF 0
-+#define TCOON 1
-+#define TCIOFF 2
-+#define TCION 3
-+
-+/* tcflush() and TCFLSH use these */
-+#define TCIFLUSH 0
-+#define TCOFLUSH 1
-+#define TCIOFLUSH 2
-+
-+/* tcsetattr uses these */
-+#define TCSANOW 0
-+#define TCSADRAIN 1
-+#define TCSAFLUSH 2
-+
-+#endif /* _ASM_UBICOM32_TERMBITS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/termios.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/termios.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/termios.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/termios.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,119 @@
-+/*
-+ * arch/ubicom32/include/asm/termios.h
-+ * Ubicom32 termio definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TERMIOS_H
-+#define _ASM_UBICOM32_TERMIOS_H
-+
-+#include <asm/termbits.h>
-+#include <asm/ioctls.h>
-+
-+struct winsize {
-+ unsigned short ws_row;
-+ unsigned short ws_col;
-+ unsigned short ws_xpixel;
-+ unsigned short ws_ypixel;
-+};
-+
-+#define NCC 8
-+struct termio {
-+ unsigned short c_iflag; /* input mode flags */
-+ unsigned short c_oflag; /* output mode flags */
-+ unsigned short c_cflag; /* control mode flags */
-+ unsigned short c_lflag; /* local mode flags */
-+ unsigned char c_line; /* line discipline */
-+ unsigned char c_cc[NCC]; /* control characters */
-+};
-+
-+#ifdef __KERNEL__
-+/* intr=^C quit=^| erase=del kill=^U
-+ eof=^D vtime=\0 vmin=\1 sxtc=\0
-+ start=^Q stop=^S susp=^Z eol=\0
-+ reprint=^R discard=^U werase=^W lnext=^V
-+ eol2=\0
-+*/
-+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-+#endif
-+
-+/* modem lines */
-+#define TIOCM_LE 0x001
-+#define TIOCM_DTR 0x002
-+#define TIOCM_RTS 0x004
-+#define TIOCM_ST 0x008
-+#define TIOCM_SR 0x010
-+#define TIOCM_CTS 0x020
-+#define TIOCM_CAR 0x040
-+#define TIOCM_RNG 0x080
-+#define TIOCM_DSR 0x100
-+#define TIOCM_CD TIOCM_CAR
-+#define TIOCM_RI TIOCM_RNG
-+#define TIOCM_OUT1 0x2000
-+#define TIOCM_OUT2 0x4000
-+#define TIOCM_LOOP 0x8000
-+
-+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-+
-+#ifdef __KERNEL__
-+
-+/*
-+ * Translate a "termio" structure into a "termios". Ugh.
-+ */
-+#define user_termio_to_kernel_termios(termios, termio) \
-+({ \
-+ unsigned short tmp; \
-+ get_user(tmp, &(termio)->c_iflag); \
-+ (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-+ get_user(tmp, &(termio)->c_oflag); \
-+ (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-+ get_user(tmp, &(termio)->c_cflag); \
-+ (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-+ get_user(tmp, &(termio)->c_lflag); \
-+ (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-+ get_user((termios)->c_line, &(termio)->c_line); \
-+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-+})
-+
-+/*
-+ * Translate a "termios" structure into a "termio". Ugh.
-+ */
-+#define kernel_termios_to_user_termio(termio, termios) \
-+({ \
-+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
-+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
-+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
-+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
-+ put_user((termios)->c_line, &(termio)->c_line); \
-+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-+})
-+
-+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_UBICOM32_TERMIOS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/thread-asm.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/thread-asm.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/thread-asm.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/thread-asm.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,51 @@
-+/*
-+ * arch/ubicom32/include/asm/thread-asm.h
-+ * Ubicom32 architecture specific thread definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_THREAD_ASM_H
-+#define _ASM_UBICOM32_THREAD_ASM_H
-+
-+/*
-+ * thread_get_self
-+ * Read and shift the current thread into reg
-+ *
-+ * Note that we don't need to mask the result as bits 6 through 31 of the
-+ * ROSR are zeroes.
-+ */
-+.macro thread_get_self reg
-+ lsr.4 \reg, ROSR, #2
-+.endm
-+
-+/*
-+ * thread_get_self_mask
-+ * Read and shift the current thread mask into reg
-+ */
-+.macro thread_get_self_mask reg
-+ lsr.4 \reg, ROSR, #2
-+ lsl.4 \reg, #1, \reg /* Thread bit */
-+.endm
-+
-+#endif /* _ASM_UBICOM32_THREAD_ASM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/thread.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/thread.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/thread.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/thread.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,320 @@
-+/*
-+ * arch/ubicom32/include/asm/thread.h
-+ * Ubicom32 architecture specific thread definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_THREAD_H
-+#define _ASM_UBICOM32_THREAD_H
-+
-+#if !defined(__ASSEMBLY__)
-+
-+#include <asm/ptrace.h>
-+#include <asm/ubicom32-common.h>
-+
-+typedef int thread_t;
-+typedef unsigned char thread_type_t;
-+typedef void (*thread_exec_fn_t)(void *arg);
-+
-+#define THREAD_NULL 0x40
-+#define THREAD_TYPE_HRT (1 << 0)
-+#define THREAD_TYPE_SPECIAL 0
-+#define THREAD_TYPE_NORMAL 0
-+#define THREAD_TYPE_BACKGROUND (1 << 1)
-+
-+/*
-+ * This is the upper bound on the maximum hardware threads that one will find
-+ * on a Ubicom processor. It is used to size per hardware thread data structures.
-+ */
-+#define THREAD_ARCHITECTURAL_MAX 16
-+
-+/*
-+ * TODO: Rename this at some point to be thread_
-+ */
-+extern unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
-+
-+
-+/*
-+ * thread_get_self()
-+ */
-+static inline thread_t thread_get_self(void)
-+{
-+ thread_t result;
-+
-+ /*
-+ * Note that ROSR has zeroes in bits 6 through 31 and so we don't need
-+ * to do any additional bit masking here.
-+ */
-+ asm (
-+ "lsr.4 %0, ROSR, #2 \n\t"
-+ : "=d" (result)
-+ :
-+ : "cc"
-+ );
-+
-+ return result;
-+}
-+
-+/*
-+ * thread_suspend()
-+ */
-+static inline void thread_suspend(void)
-+{
-+ asm volatile (
-+ "suspend\n\t"
-+ :
-+ :
-+ );
-+}
-+
-+/*
-+ * thread_resume()
-+ */
-+static inline void thread_resume(thread_t thread)
-+{
-+ asm volatile (
-+ "move.4 MT_ACTIVE_SET, %0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ :
-+ : "d" (1 << thread)
-+ );
-+}
-+
-+
-+
-+/*
-+ * thread_enable_mask()
-+ * Enable all threads in the mask.
-+ *
-+ * All writes to MT_EN must be protected by the MT_EN_LOCK bit
-+ */
-+static inline void thread_enable_mask(unsigned int mask)
-+{
-+ /*
-+ * must flush the pipeline twice.
-+ * first pipe_flush is to ensure write to MT_EN is completed
-+ * second one is to ensure any new instructions from
-+ * the targeted thread (the one being disabled), that
-+ * are issued while the write to MT_EN is being executed,
-+ * are completed.
-+ */
-+ UBICOM32_LOCK(MT_EN_LOCK_BIT);
-+ asm volatile (
-+ "or.4 MT_EN, MT_EN, %0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ :
-+ : "d" (mask)
-+ : "cc"
-+ );
-+ UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
-+}
-+
-+/*
-+ * thread_enable()
-+ */
-+static inline void thread_enable(thread_t thread)
-+{
-+ thread_enable_mask(1 << thread);
-+}
-+
-+/*
-+ * thread_disable_mask()
-+ * Disable all threads in the mask.
-+ *
-+ * All writes to MT_EN must be protected by the MT_EN_LOCK bit
-+ */
-+static inline void thread_disable_mask(unsigned int mask)
-+{
-+ /*
-+ * must flush the pipeline twice.
-+ * first pipe_flush is to ensure write to MT_EN is completed
-+ * second one is to ensure any new instructions from
-+ * the targeted thread (the one being disabled), that
-+ * are issued while the write to MT_EN is being executed,
-+ * are completed.
-+ */
-+ UBICOM32_LOCK(MT_EN_LOCK_BIT);
-+ asm volatile (
-+ "and.4 MT_EN, MT_EN, %0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ :
-+ : "d" (~mask)
-+ : "cc"
-+ );
-+ UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
-+}
-+
-+/*
-+ * thread_disable()
-+ */
-+static inline void thread_disable(thread_t thread)
-+{
-+ thread_disable_mask(1 << thread);
-+}
-+
-+/*
-+ * thread_disable_others()
-+ * Disable all other threads
-+ */
-+static inline void thread_disable_others(void)
-+{
-+ thread_t self = thread_get_self();
-+ thread_disable_mask(~(1 << self));
-+}
-+
-+/*
-+ * thread_is_trapped()
-+ * Is the specified tid trapped?
-+ */
-+static inline int thread_is_trapped(thread_t tid)
-+{
-+ int thread_mask = (1 << tid);
-+ int trap_thread;
-+
-+ asm (
-+ "move.4 %0, MT_TRAP \n\t"
-+ : "=d" (trap_thread)
-+ :
-+ );
-+ return (trap_thread & thread_mask);
-+}
-+
-+/*
-+ * thread_is_enabled()
-+ * Is the specified tid enabled?
-+ */
-+static inline int thread_is_enabled(thread_t tid)
-+{
-+ int thread_mask = (1 << tid);
-+ int enabled_threads;
-+
-+ asm (
-+ "move.4 %0, MT_EN \n\t"
-+ : "=d" (enabled_threads)
-+ :
-+ );
-+ return (enabled_threads & thread_mask);
-+}
-+
-+/*
-+ * thread_get_instruction_count()
-+ */
-+static inline unsigned int thread_get_instruction_count(void)
-+{
-+ unsigned int result;
-+ asm (
-+ "move.4 %0, INST_CNT \n\t"
-+ : "=r" (result)
-+ );
-+ return result;
-+}
-+
-+/*
-+ * thread_get_pc()
-+ * pc could point to a speculative and cancelled instruction unless thread is disabled
-+ */
-+static inline void *thread_get_pc(thread_t thread)
-+{
-+ void *result;
-+ asm (
-+ "move.4 csr, %1 \n\t"
-+ "setcsr_flush 0 \n\t"
-+ "move.4 %0, pc \n\t"
-+ "move.4 csr, #0 \n\t"
-+ "setcsr_flush 0 \n\t"
-+ : "=r" (result)
-+ : "r" ((thread << 9) | (1 << 8))
-+ );
-+ return result;
-+}
-+
-+/*
-+ * thread_get_trap_cause()
-+ * This should be called only when the thread is not running
-+ */
-+static inline unsigned int thread_get_trap_cause(thread_t thread)
-+{
-+ unsigned int result;
-+ asm (
-+ "move.4 csr, %1 \n\t"
-+ "setcsr_flush 0 \n\t"
-+ "move.4 %0, trap_cause \n\t"
-+ "move.4 csr, #0 \n\t"
-+ "setcsr_flush 0 \n\t"
-+ : "=r" (result)
-+ : "r" ((thread << 9) | (1 << 8))
-+ );
-+ return result;
-+}
-+
-+/*
-+ * THREAD_STALL macro.
-+ */
-+#define THREAD_STALL \
-+ asm volatile ( \
-+ "move.4 mt_dbg_active_clr, #-1 \n\t" \
-+ "pipe_flush 0 \n\t" \
-+ : \
-+ : \
-+ )
-+
-+extern unsigned int thread_get_mainline(void);
-+extern void thread_set_mainline(thread_t tid);
-+extern thread_t thread_alloc(void);
-+extern thread_t thread_start(thread_t thread, thread_exec_fn_t exec, void *arg, unsigned int *sp_high, thread_type_t type);
-+
-+/*
-+ * asm macros
-+ */
-+asm (
-+/*
-+ * thread_get_self
-+ * Read and shift the current thread into reg
-+ *
-+ * Note that we don't need to mask the result as bits 6 through 31 of the
-+ * ROSR are zeroes.
-+ */
-+".macro thread_get_self reg \n\t"
-+" lsr.4 \\reg, ROSR, #2 \n\t"
-+".endm \n\t"
-+
-+/*
-+ * thread_get_self_mask
-+ * Read and shift the current thread mask into reg
-+ */
-+".macro thread_get_self_mask reg \n\t"
-+" lsr.4 \\reg, ROSR, #2 \n\t"
-+" lsl.4 \\reg, #1, \\reg \n\t" /* Thread bit */
-+".endm \n\t"
-+);
-+
-+#else /* __ASSEMBLY__ */
-+
-+#include <asm/thread-asm.h>
-+
-+#endif /* __ASSEMBLY__ */
-+#endif /* _ASM_UBICOM32_THREAD_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/thread_info.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/thread_info.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/thread_info.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/thread_info.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/ubicom32/include/asm/thread_info.h
-+ * Ubicom32 architecture low-level thread information.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
-+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
-+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_THREAD_INFO_H
-+#define _ASM_UBICOM32_THREAD_INFO_H
-+
-+#include <asm/page.h>
-+
-+/*
-+ * Size of kernel stack for each process. This must be a power of 2...
-+ */
-+#ifdef CONFIG_4KSTACKS
-+#define THREAD_SIZE_ORDER (0)
-+#else
-+#define THREAD_SIZE_ORDER (1)
-+#endif
-+
-+/*
-+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
-+ */
-+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-+
-+#ifdef __KERNEL__
-+
-+#ifndef __ASSEMBLY__
-+
-+/*
-+ * low level task data.
-+ */
-+struct thread_info {
-+ struct task_struct *task; /* main task structure */
-+ struct exec_domain *exec_domain; /* execution domain */
-+ unsigned long flags; /* low level flags */
-+ int cpu; /* cpu we're on */
-+ int preempt_count; /* 0 => preemptable, <0 => BUG */
-+ int interrupt_nesting; /* Interrupt nesting level. */
-+ struct restart_block restart_block;
-+};
-+
-+/*
-+ * macros/functions for gaining access to the thread information structure
-+ */
-+#define INIT_THREAD_INFO(tsk) \
-+{ \
-+ .task = &tsk, \
-+ .exec_domain = &default_exec_domain, \
-+ .flags = 0, \
-+ .cpu = 0, \
-+ .interrupt_nesting = 0, \
-+ .restart_block = { \
-+ .fn = do_no_restart_syscall, \
-+ }, \
-+}
-+
-+#define init_thread_info (init_thread_union.thread_info)
-+#define init_stack (init_thread_union.stack)
-+
-+
-+/* how to get the thread information struct from C */
-+static inline struct thread_info *current_thread_info(void)
-+{
-+ struct thread_info *ti;
-+
-+ asm (
-+ "and.4 %0, sp, %1\n\t"
-+ : "=&r" (ti)
-+ : "d" (~(THREAD_SIZE-1))
-+ : "cc"
-+ );
-+
-+ return ti;
-+}
-+
-+#define STACK_WARN (THREAD_SIZE / 8)
-+
-+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR 1
-+
-+/* thread information allocation */
-+#define alloc_thread_info(tsk) ((struct thread_info *) \
-+ __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-+#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
-+#endif /* __ASSEMBLY__ */
-+
-+#define PREEMPT_ACTIVE 0x4000000
-+
-+/*
-+ * thread information flag bit numbers
-+ */
-+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-+#define TIF_SIGPENDING 1 /* signal pending */
-+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-+#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
-+ TIF_NEED_RESCHED */
-+#define TIF_MEMDIE 4
-+
-+/* as above, but as bit values */
-+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-+
-+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_UBICOM32_THREAD_INFO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/timex.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/timex.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/timex.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/timex.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,56 @@
-+/*
-+ * arch/ubicom32/include/asm/timex.h
-+ * Ubicom32 architecture timex specifications.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TIMEX_H
-+#define _ASM_UBICOM32_TIMEX_H
-+
-+#define CLOCK_TICK_RATE 266000000
-+
-+// #define ARCH_HAS_READ_CURRENT_TIMER
-+
-+typedef unsigned long cycles_t;
-+
-+static inline cycles_t get_cycles(void)
-+{
-+ return 0;
-+}
-+
-+extern int timer_alloc(void);
-+extern void timer_set(int timervector, unsigned int cycles);
-+extern int timer_reset(int timervector, unsigned int cycles);
-+extern void timer_tick_init(void);
-+extern void timer_device_init(void);
-+
-+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-+extern void local_timer_interrupt(void);
-+#endif
-+
-+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-+extern int local_timer_setup(unsigned int cpu);
-+#endif
-+
-+#endif /* _ASM_UBICOM32_TIMEX_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/tlbflush.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/tlbflush.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/tlbflush.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/tlbflush.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,79 @@
-+/*
-+ * arch/ubicom32/include/asm/tlbflush.h
-+ * TLB operations for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
-+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TLB_FLUSH_H
-+#define _ASM_UBICOM32_TLB_FLUSH_H
-+
-+#include <asm/setup.h>
-+
-+/*
-+ * flush all user-space atc entries.
-+ */
-+static inline void __flush_tlb(void)
-+{
-+ BUG();
-+}
-+
-+static inline void __flush_tlb_one(unsigned long addr)
-+{
-+ BUG();
-+}
-+
-+#define flush_tlb() __flush_tlb()
-+
-+/*
-+ * flush all atc entries (both kernel and user-space entries).
-+ */
-+static inline void flush_tlb_all(void)
-+{
-+ BUG();
-+}
-+
-+static inline void flush_tlb_mm(struct mm_struct *mm)
-+{
-+ BUG();
-+}
-+
-+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-+{
-+ BUG();
-+}
-+
-+static inline void flush_tlb_range(struct mm_struct *mm,
-+ unsigned long start, unsigned long end)
-+{
-+ BUG();
-+}
-+
-+static inline void flush_tlb_kernel_page(unsigned long addr)
-+{
-+ BUG();
-+}
-+
-+#endif /* _ASM_UBICOM32_TLB_FLUSH_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/tlb.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/tlb.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/tlb.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/tlb.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,47 @@
-+/*
-+ * arch/ubicom32/include/asm/tlb.h
-+ * Ubicom32 architecture TLB operations.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TLB_H
-+#define _ASM_UBICOM32_TLB_H
-+
-+/*
-+ * ubicom32 doesn't need any special per-pte or
-+ * per-vma handling..
-+ */
-+#define tlb_start_vma(tlb, vma) do { } while (0)
-+#define tlb_end_vma(tlb, vma) do { } while (0)
-+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-+
-+/*
-+ * .. because we flush the whole mm when it
-+ * fills up.
-+ */
-+#define tlb_flush(tlb)
-+
-+#include <asm-generic/tlb.h>
-+
-+#endif /* _ASM_UBICOM32_TLB_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/topology.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/topology.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/topology.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/topology.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/topology.h
-+ * Generic topology.h definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TOPOLOGY_H
-+#define _ASM_UBICOM32_TOPOLOGY_H
-+
-+#include <asm-generic/topology.h>
-+
-+#endif /* _ASM_UBICOM32_TOPOLOGY_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/traps.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/traps.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/traps.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/traps.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,55 @@
-+/*
-+ * arch/ubicom32/include/asm/traps.h
-+ * Trap related definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_TRAPS_H
-+#define _ASM_UBICOM32_TRAPS_H
-+
-+/*
-+ * Trap causes passed from ultra to Host OS
-+ */
-+#define TRAP_CAUSE_TOTAL 13
-+#define TRAP_CAUSE_DST_RANGE_ERR 12
-+#define TRAP_CAUSE_SRC1_RANGE_ERR 11
-+#define TRAP_CAUSE_I_RANGE_ERR 10
-+#define TRAP_CAUSE_DCAPT 9
-+#define TRAP_CAUSE_DST_SERROR 8
-+#define TRAP_CAUSE_SRC1_SERROR 7
-+#define TRAP_CAUSE_DST_MISALIGNED 6
-+#define TRAP_CAUSE_SRC1_MISALIGNED 5
-+#define TRAP_CAUSE_DST_DECODE_ERR 4
-+#define TRAP_CAUSE_SRC1_DECODE_ERR 3
-+#define TRAP_CAUSE_ILLEGAL_INST 2
-+#define TRAP_CAUSE_I_SERROR 1
-+#define TRAP_CAUSE_I_DECODE_ERR 0
-+
-+extern void trap_handler(int irq, struct pt_regs *regs);
-+extern void trap_init_interrupt(void);
-+extern void unaligned_emulate(unsigned int thread);
-+extern int unaligned_only(unsigned int cause);
-+
-+#endif /* _ASM_UBICOM32_TRAPS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/types.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/types.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/types.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/types.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,75 @@
-+/*
-+ * arch/ubicom32/include/asm/types.h
-+ * Date type definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_TYPES_H
-+#define _ASM_UBICOM32_TYPES_H
-+
-+/*
-+ * This file is never included by application software unless
-+ * explicitly requested (e.g., via linux/types.h) in which case the
-+ * application is Linux specific so (user-) name space pollution is
-+ * not a major issue. However, for interoperability, libraries still
-+ * need to be careful to avoid a name clashes.
-+ */
-+
-+#include <asm-generic/int-ll64.h>
-+
-+#ifndef __ASSEMBLY__
-+
-+typedef unsigned short umode_t;
-+
-+#endif /* __ASSEMBLY__ */
-+
-+/*
-+ * These aren't exported outside the kernel to avoid name space clashes
-+ */
-+#ifdef __KERNEL__
-+
-+#define BITS_PER_LONG 32
-+
-+#ifndef __ASSEMBLY__
-+
-+/* DMA addresses are always 32-bits wide */
-+
-+typedef u32 dma_addr_t;
-+typedef u32 dma64_addr_t;
-+
-+/*
-+ * XXX These are "Ubicom style" typedefs. They should be removed in all files used by linux.
-+ */
-+typedef u32 u32_t;
-+typedef s32 s32_t;
-+typedef u16 u16_t;
-+typedef s16 s16_t;
-+typedef u8 u8_t;
-+typedef s8 s8_t;
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_UBICOM32_TYPES_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/uaccess.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/uaccess.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/uaccess.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/uaccess.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,347 @@
-+/*
-+ * arch/ubicom32/include/asm/uaccess.h
-+ * User space memory access functions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ * arch/alpha
-+ */
-+#ifndef _ASM_UBICOM32_UACCESS_H
-+#define _ASM_UBICOM32_UACCESS_H
-+
-+/*
-+ * User space memory access functions
-+ */
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+
-+#include <asm/segment.h>
-+
-+#define VERIFY_READ 0
-+#define VERIFY_WRITE 1
-+
-+/*
-+ * The exception table consists of pairs of addresses: the first is the
-+ * address of an instruction that is allowed to fault, and the second is
-+ * the address at which the program should continue. No registers are
-+ * modified, so it is entirely up to the continuation code to figure out
-+ * what to do.
-+ *
-+ * All the routines below use bits of fixup code that are out of line
-+ * with the main instruction path. This means when everything is well,
-+ * we don't even have to jump over them. Further, they do not intrude
-+ * on our cache or tlb entries.
-+ */
-+struct exception_table_entry
-+{
-+ unsigned long insn, fixup;
-+};
-+
-+/*
-+ * Ubicom32 does not currently support the exception table handling.
-+ */
-+extern unsigned long search_exception_table(unsigned long);
-+
-+
-+#if defined(CONFIG_ACCESS_OK_CHECKS_ENABLED)
-+extern int __access_ok(unsigned long addr, unsigned long size);
-+#else
-+static inline int __access_ok(unsigned long addr, unsigned long size)
-+{
-+ return 1;
-+}
-+#endif
-+#define access_ok(type, addr, size) \
-+ likely(__access_ok((unsigned long)(addr), (size)))
-+
-+/*
-+ * The following functions do not exist. They keep callers
-+ * of put_user and get_user from passing unsupported argument
-+ * types. They result in a link time error.
-+ */
-+extern int __put_user_bad(void);
-+extern int __get_user_bad(void);
-+
-+/*
-+ * __put_user_no_check()
-+ * Put the requested data into the user space verifying the address
-+ *
-+ * Careful to not
-+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
-+ * (b) require any knowledge of processes at this stage
-+ */
-+#define __put_user_no_check(x, ptr, size) \
-+({ \
-+ int __pu_err = 0; \
-+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
-+ switch (size) { \
-+ case 1: \
-+ case 2: \
-+ case 4: \
-+ case 8: \
-+ *__pu_addr = (__typeof__(*(ptr)))x; \
-+ break; \
-+ default: \
-+ __pu_err = __put_user_bad(); \
-+ break; \
-+ } \
-+ __pu_err; \
-+})
-+
-+/*
-+ * __put_user_check()
-+ * Put the requested data into the user space verifying the address
-+ *
-+ * Careful to not
-+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
-+ * (b) require any knowledge of processes at this stage
-+ *
-+ * If requested, access_ok() will verify that ptr is a valid user
-+ * pointer.
-+ */
-+#define __put_user_check(x, ptr, size) \
-+({ \
-+ int __pu_err = -EFAULT; \
-+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
-+ if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \
-+ __pu_err = 0; \
-+ switch (size) { \
-+ case 1: \
-+ case 2: \
-+ case 4: \
-+ case 8: \
-+ *__pu_addr = (__typeof__(*(ptr)))x; \
-+ break; \
-+ default: \
-+ __pu_err = __put_user_bad(); \
-+ break; \
-+ } \
-+ } \
-+ __pu_err; \
-+})
-+
-+/*
-+ * __get_user_no_check()
-+ * Read the value at ptr into x.
-+ *
-+ * If requested, access_ok() will verify that ptr is a valid user
-+ * pointer. If the caller passes a modifying argument for ptr (e.g. x++)
-+ * this macro will not work.
-+ */
-+#define __get_user_no_check(x, ptr, size) \
-+({ \
-+ int __gu_err = 0; \
-+ __typeof__((x)) __gu_val = 0; \
-+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
-+ switch (size) { \
-+ case 1: \
-+ case 2: \
-+ case 4: \
-+ case 8: \
-+ __gu_val = (__typeof__((x)))*(__gu_addr); \
-+ break; \
-+ default: \
-+ __gu_err = __get_user_bad(); \
-+ (x) = 0; \
-+ break; \
-+ } \
-+ (x) = __gu_val; \
-+ __gu_err; \
-+})
-+
-+/*
-+ * __get_user_check()
-+ * Read the value at ptr into x.
-+ *
-+ * If requested, access_ok() will verify that ptr is a valid user
-+ * pointer.
-+ */
-+#define __get_user_check(x, ptr, size) \
-+({ \
-+ int __gu_err = -EFAULT; \
-+ __typeof__(x) __gu_val = 0; \
-+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
-+ if (access_ok(VERIFY_READ, __gu_addr, size)) { \
-+ __gu_err = 0; \
-+ switch (size) { \
-+ case 1: \
-+ case 2: \
-+ case 4: \
-+ case 8: \
-+ __gu_val = (__typeof__((x)))*(__gu_addr); \
-+ break; \
-+ default: \
-+ __gu_err = __get_user_bad(); \
-+ (x) = 0; \
-+ break; \
-+ } \
-+ } \
-+ (x) = __gu_val; \
-+ __gu_err; \
-+})
-+
-+/*
-+ * The "xxx" versions are allowed to perform some amount of address
-+ * space checking. See access_ok().
-+ */
-+#define put_user(x,ptr) \
-+ __put_user_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
-+#define get_user(x,ptr) \
-+ __get_user_check((x), (ptr), sizeof(*(ptr)))
-+
-+/*
-+ * The "__xxx" versions do not do address space checking, useful when
-+ * doing multiple accesses to the same area (the programmer has to do the
-+ * checks by hand with "access_ok()")
-+ */
-+#define __put_user(x,ptr) \
-+ __put_user_no_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
-+#define __get_user(x,ptr) \
-+ __get_user_no_check((x), (ptr), sizeof(*(ptr)))
-+
-+/*
-+ * __copy_tofrom_user_no_check()
-+ * Copy the data either to or from user space.
-+ *
-+ * Return the number of bytes NOT copied.
-+ */
-+static inline unsigned long
-+__copy_tofrom_user_no_check(void *to, const void *from, unsigned long n)
-+{
-+ memcpy(to, from, n);
-+ return 0;
-+}
-+
-+/*
-+ * copy_to_user()
-+ * Copy the kernel data to user space.
-+ *
-+ * Return the number of bytes that were copied.
-+ */
-+static inline unsigned long
-+copy_to_user(void __user *to, const void *from, unsigned long n)
-+{
-+ if (!access_ok(VERIFY_WRITE, to, n)) {
-+ return n;
-+ }
-+ return __copy_tofrom_user_no_check((__force void *)to, from, n);
-+}
-+
-+/*
-+ * copy_from_user()
-+ * Copy the user data to kernel space.
-+ *
-+ * Return the number of bytes that were copied. On error, we zero
-+ * out the destination.
-+ */
-+static inline unsigned long
-+copy_from_user(void *to, const void __user *from, unsigned long n)
-+{
-+ if (!access_ok(VERIFY_READ, from, n)) {
-+ return n;
-+ }
-+ return __copy_tofrom_user_no_check(to, (__force void *)from, n);
-+}
-+
-+#define __copy_to_user(to, from, n) \
-+ __copy_tofrom_user_no_check((__force void *)to, from, n)
-+#define __copy_from_user(to, from, n) \
-+ __copy_tofrom_user_no_check(to, (__force void *)from, n)
-+#define __copy_to_user_inatomic(to, from, n) \
-+ __copy_tofrom_user_no_check((__force void *)to, from, n)
-+#define __copy_from_user_inatomic(to, from, n) \
-+ __copy_tofrom_user_no_check(to, (__force void *)from, n)
-+
-+#define copy_to_user_ret(to, from, n, retval) \
-+ ({ if (copy_to_user(to, from, n)) return retval; })
-+
-+#define copy_from_user_ret(to, from, n, retval) \
-+ ({ if (copy_from_user(to, from, n)) return retval; })
-+
-+/*
-+ * strncpy_from_user()
-+ * Copy a null terminated string from userspace.
-+ *
-+ * dst - Destination in kernel space. The buffer must be at least count.
-+ * src - Address of string in user space.
-+ * count - Maximum number of bytes to copy (including the trailing NULL).
-+ *
-+ * Returns the length of the string (not including the trailing NULL. If
-+ * count is smaller than the length of the string, we copy count bytes
-+ * and return count.
-+ *
-+ */
-+static inline long strncpy_from_user(char *dst, const __user char *src, long count)
-+{
-+ char *tmp;
-+ if (!access_ok(VERIFY_READ, src, 1)) {
-+ return -EFAULT;
-+ }
-+
-+ strncpy(dst, src, count);
-+ for (tmp = dst; *tmp && count > 0; tmp++, count--) {
-+ ;
-+ }
-+ return(tmp - dst);
-+}
-+
-+/*
-+ * strnlen_user()
-+ * Return the size of a string (including the ending 0)
-+ *
-+ * Return -EFAULT on exception, a value greater than <n> if too long
-+ */
-+static inline long strnlen_user(const __user char *src, long n)
-+{
-+ if (!access_ok(VERIFY_READ, src, 1)) {
-+ return -EFAULT;
-+ }
-+ return(strlen(src) + 1);
-+}
-+
-+#define strlen_user(str) strnlen_user(str, 32767)
-+
-+/*
-+ * __clear_user()
-+ * Zero Userspace
-+ */
-+static inline unsigned long __clear_user(__user void *to, unsigned long n)
-+{
-+ memset(to, 0, n);
-+ return 0;
-+}
-+
-+/*
-+ * clear_user()
-+ * Zero user space (check for valid addresses)
-+ */
-+static inline unsigned long clear_user(__user void *to, unsigned long n)
-+{
-+ if (!access_ok(VERIFY_WRITE, to, n)) {
-+ return -EFAULT;
-+ }
-+ return __clear_user(to, n);
-+}
-+
-+#endif /* _ASM_UBICOM32_UACCESS_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/uart_tio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/uart_tio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/uart_tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/uart_tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ * arch/ubicom32/include/asm/uart_tio.h
-+ * Ubicom32 architecture UART TIO definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_UART_TIO_H
-+#define _ASM_UBICOM32_UART_TIO_H
-+
-+#include <asm/devtree.h>
-+
-+#define UARTTIO_RX_FIFO_SIZE 16
-+#define UARTTIO_TX_FIFO_SIZE 16
-+
-+/*
-+ * Interrupt flags
-+ */
-+#define UARTTIO_UART_INT_RX 0x00000001 // set when a character has been recevied (TODO: add watermark)
-+#define UARTTIO_UART_INT_RXOVF 0x00000002 // set when the receive buffer has overflowed
-+#define UARTTIO_UART_INT_RXFRAME 0x00000004 // set when there has been a framing error
-+
-+#define UARTTIO_UART_INT_TX 0x00000100 // set every time a character is transmitted
-+#define UARTTIO_UART_INT_TXBE 0x00000200 // set when the transmit buffer is empty (TODO: add watermark)
-+
-+#define UARTTIO_UART_FLAG_ENABLED 0x80000000
-+#define UARTTIO_UART_FLAG_SET_RATE 0x00000001 // set to update baud rate
-+#define UARTTIO_UART_FLAG_RESET 0x00000002 // set to reset the port
-+struct uarttio_uart {
-+ volatile u32_t flags;
-+
-+ volatile u32_t baud_rate;
-+ volatile u32_t current_baud_rate;
-+ u32_t bit_time;
-+
-+ /*
-+ * Modem status register
-+ */
-+ volatile u32_t status;
-+
-+ /*
-+ * Interrupt registers
-+ */
-+ volatile u32_t int_mask;
-+ volatile u32_t int_flags;
-+
-+ /*
-+ * Ports and pins
-+ */
-+ u32_t rx_port;
-+ u32_t tx_port;
-+
-+ u8_t rx_pin;
-+ u8_t tx_pin;
-+
-+ /*
-+ * Configuration Data
-+ */
-+ u8_t rx_bits;
-+ u8_t rx_stop_bits;
-+ u8_t tx_bits;
-+ u8_t tx_stop_bits;
-+
-+ /*
-+ * RX state machine data
-+ */
-+ u32_t rx_timer;
-+ u32_t rx_bit_pos;
-+ u32_t rx_byte;
-+ u32_t rx_fifo_head;
-+ u32_t rx_fifo_tail;
-+ u32_t rx_fifo_size;
-+
-+ /*
-+ * TX state machine data
-+ */
-+ u32_t tx_timer;
-+ u32_t tx_bit_pos;
-+ u32_t tx_byte;
-+ u32_t tx_fifo_head;
-+ u32_t tx_fifo_tail;
-+ u32_t tx_fifo_size;
-+
-+ /*
-+ * FIFOs
-+ */
-+ u8_t rx_fifo[UARTTIO_RX_FIFO_SIZE];
-+ u8_t tx_fifo[UARTTIO_TX_FIFO_SIZE];
-+};
-+
-+#define UARTTIO_VP_VERSION 1
-+struct uarttio_regs {
-+ u32_t version;
-+
-+ u32_t thread;
-+
-+ u32_t max_uarts;
-+
-+ struct uarttio_uart uarts[0];
-+};
-+
-+#define UARTTIO_NODE_VERSION 1
-+struct uarttio_node {
-+ struct devtree_node dn;
-+
-+ u32_t version;
-+ struct uarttio_regs *regs;
-+ u32_t regs_sz;
-+};
-+
-+#endif /* _ASM_UBICOM32_UART_TIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubi32-cs4384.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubi32-cs4384.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubi32-cs4384.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubi32-cs4384.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,52 @@
-+/*
-+ * arch/ubicom32/include/asm/ubi32-cs4384.h
-+ * Ubicom32 architecture CS4384 driver platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_UBI32_CS4384_H
-+#define _ASM_UBICOM32_UBI32_CS4384_H
-+
-+enum ubi32_cs4384_mclk_source {
-+ UBI32_CS4384_MCLK_PWM_0,
-+ UBI32_CS4384_MCLK_PWM_1,
-+ UBI32_CS4384_MCLK_PWM_2,
-+ UBI32_CS4384_MCLK_CLKDIV_1,
-+ UBI32_CS4384_MCLK_OTHER,
-+};
-+
-+struct ubi32_cs4384_mclk_entry {
-+ /*
-+ * Rate, in Hz, of this entry
-+ */
-+ int rate;
-+
-+ /*
-+ * The divider to program to get the rate
-+ */
-+ int div;
-+};
-+
-+struct ubi32_cs4384_platform_data {
-+ enum ubi32_cs4384_mclk_source mclk_src;
-+
-+ int n_mclk;
-+ struct ubi32_cs4384_mclk_entry *mclk_entries;
-+};
-+#endif /* _ASM_UBICOM32_UBI32_CS4384_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubi32-pcm.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubi32-pcm.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubi32-pcm.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubi32-pcm.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * arch/ubicom32/include/asm/ubi32-pcm.h
-+ * Ubicom32 architecture PCM driver platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_UBI32_PCM_H
-+#define _ASM_UBICOM32_UBI32_PCM_H
-+
-+/*
-+ * This function is called when the sample rate has changed
-+ */
-+typedef int (*ubi32_pcm_set_rate_fn_t)(void *appdata, int rate);
-+
-+struct ubi32pcm_platform_data {
-+ /*
-+ * Name of the audio node/inst
-+ */
-+ const char *node_name;
-+ const char *inst_name;
-+ int inst_num;
-+
-+ /*
-+ * Application specific data provided when calling functions
-+ */
-+ void *appdata;
-+
-+ /*
-+ * Functions called when various things happen
-+ */
-+ ubi32_pcm_set_rate_fn_t set_rate;
-+
-+ /*
-+ * Pointer to optional upper layer data (i.e. DAC config, etc)
-+ */
-+ void *priv_data;
-+};
-+#endif /* _ASM_UBICOM32_UBI32_PCM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32bl.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32bl.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32bl.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32bl.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,84 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32bl.h
-+ * Ubicom32 architecture backlight driver platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_BL_H
-+#define _ASM_UBICOM32_UBICOM32_BL_H
-+
-+/*
-+ * Different backlight control mechanisms
-+ */
-+enum ubicom32bl_pwm_types {
-+ /*
-+ * PWM controlled backlight
-+ */
-+ UBICOM32BL_TYPE_PWM,
-+
-+ /*
-+ * HRT based PWM backlight
-+ */
-+ UBICOM32BL_TYPE_PWM_HRT,
-+
-+ /*
-+ * No dimming, just on or off
-+ */
-+ UBICOM32BL_TYPE_BINARY,
-+};
-+
-+struct ubicom32bl_platform_data {
-+ /*
-+ * Default intensity of the backlight 0-255
-+ */
-+ u8_t default_intensity;
-+
-+ /*
-+ * TRUE if the backlight sense is active low. (inverted)
-+ * FALSE if the backlight sense is active high.
-+ */
-+ bool invert;
-+
-+ /*
-+ * Type of the backlight
-+ */
-+ enum ubicom32bl_pwm_types type;
-+
-+ /*
-+ * GPIO of the backlight if UBICOM32BL_TYPE_PWM_HRT, UBICOM32BL_TYPE_BINARY
-+ */
-+ unsigned gpio;
-+
-+ /*
-+ * PWM channel and parameters of the backlight if UBICOM32BL_TYPE_PWM
-+ * pre_scaler: sets the rate at which the PWM timer is clocked. (clk_core / 2^pre_scaler)
-+ * period: sets the period of the timer in timer cycles
-+ * The duty cycle will be directly proportional to the brightness setting.
-+ */
-+ u32_t pwm_channel;
-+ u8_t pwm_prescale;
-+ u16_t pwm_period;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_BL_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-common-asm.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-common-asm.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-common-asm.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-common-asm.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,49 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32-common-asm.h
-+ * Ubicom32 atomic lock operations.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
-+#define _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
-+
-+/*
-+ * atomic_lock_acquire macro
-+ * Equivalent to __atomic_lock_acquire()
-+ */
-+.macro atomic_lock_acquire
-+ bset scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
-+ jmpne.f .-4
-+.endm
-+
-+/*
-+ * atomic_lock_release macro
-+ * Equivalent to __atomic_lock_release()
-+ */
-+.macro atomic_lock_release
-+ bclr scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
-+.endm
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_COMMON_ASM_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-common.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-common.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-common.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-common.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,128 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32-common.h
-+ * Ubicom32 atomic lock operations.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_UBICOM32_COMMON_H
-+#define _ASM_UBICOM32_UBICOM32_COMMON_H
-+
-+#define S(arg) #arg
-+#define D(arg) S(arg)
-+/*
-+ * scratchpad1 is owned by the LDSR.
-+ *
-+ * The upper bits provide 16 global spinlocks. Acquiring one of these
-+ * global spinlocks synchornizes across multiple threads and prevents
-+ * the LDSR from delivering any interrupts while the lock is held.
-+ * Use these locks only when absolutely required.
-+ *
-+ * The lower 16 bits of scratchpad1 are used as per thread interrupt
-+ * enable/disable bits. These bits will prevent a thread from receiving
-+ * any interrupts.
-+ *
-+ * Bit Usage:
-+ * - MT_EN_LOCK_BIT - Protects writes to MT_EN, so code can read current value
-+ * then write a new value atomically (profiler for example)
-+ * - ATOMIC_LOCK_BIT - Used to provide general purpose atomic handling.
-+ * - LDSR_LOCK_BIT - Used by the LDSR exclusively to provide protection.
-+ * - DCCR_LOCK_BIT - Used to limit access to the DCCR cache control peripheral
-+ * - ICCR_LOCK_BIT - Used to limit access to the ICCR cache control peripheral
-+ * - LSB 16 bits - Used by the LDSR to represent thread enable/disable bits.
-+ */
-+#define MT_EN_LOCK_BIT 31
-+#define ATOMIC_LOCK_BIT 30
-+#define LDSR_LOCK_BIT 29
-+#define PCI_LOCK_BIT 28
-+#define ICCR_LOCK_BIT 27
-+#define DCCR_LOCK_BIT 26
-+
-+#if !defined(__ASSEMBLY__)
-+
-+#define UBICOM32_TRYLOCK(bit) \
-+ asm volatile ( \
-+ " move.4 %0, #0 \n\t" \
-+ " bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
-+ " jmpne.f 1f \n\t" \
-+ " move.4 %0, #1 \n\t" \
-+ "1: \n\t" \
-+ : "=r" (ret) \
-+ : \
-+ : "cc", "memory" \
-+ ) \
-+
-+#define UBICOM32_UNLOCK(bit) \
-+ asm volatile ( \
-+ " bclr scratchpad1, scratchpad1, #"D(bit)" \n\t" \
-+ : \
-+ : \
-+ : "cc", "memory" \
-+ ) \
-+
-+#define UBICOM32_LOCK(bit) \
-+ asm volatile ( \
-+ "1: bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
-+ " jmpne.f 1b \n\t" \
-+ : \
-+ : \
-+ : "cc", "memory" \
-+ ) \
-+
-+/*
-+ * __atomic_lock_trylock()
-+ * Attempt to acquire the lock, return TRUE if acquired.
-+ */
-+static inline int __atomic_lock_trylock(void)
-+{
-+ int ret;
-+ UBICOM32_TRYLOCK(ATOMIC_LOCK_BIT);
-+ return ret;
-+}
-+
-+/*
-+ * __atomic_lock_release()
-+ * Release the global atomic lock.
-+ *
-+ * Note: no one is suspended waiting since this lock is a spinning lock.
-+ */
-+static inline void __atomic_lock_release(void)
-+{
-+ UBICOM32_UNLOCK(ATOMIC_LOCK_BIT);
-+}
-+
-+/*
-+ * __atomic_lock_acquire()
-+ * Acquire the global atomic lock, spin if not available.
-+ */
-+static inline void __atomic_lock_acquire(void)
-+{
-+ UBICOM32_LOCK(ATOMIC_LOCK_BIT);
-+}
-+#else /* __ASSEMBLY__ */
-+
-+#include <asm/ubicom32-common-asm.h>
-+
-+#endif /* __ASSEMBLY__ */
-+#endif /* _ASM_UBICOM32_UBICOM32_COMMON_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32fb.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32fb.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32fb.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32fb.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,56 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32fb.h
-+ * Ubicom32 architecture video frame buffer definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32FB_H
-+#define _ASM_UBICOM32_UBICOM32FB_H
-+
-+#include <linux/ioctl.h>
-+
-+/*
-+ * Set next frame
-+ */
-+#define UBICOM32FB_IOCTL_SET_NEXT_FRAME _IOW('r', 1, void *)
-+#define UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC _IOW('r', 2, void *)
-+
-+/*
-+ * Set Mode
-+ */
-+#define UBICOM32FB_IOCTL_SET_MODE _IOW('r', 3, void *)
-+struct ubicom32fb_mode {
-+ unsigned long width;
-+ unsigned long height;
-+ unsigned long flags;
-+ void *next_frame;
-+};
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER (1 << 8)
-+
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER (1 << 7)
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV (1 << 6)
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB (1 << 5)
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255 (1 << 4)
-+
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255 (1 << 3)
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1 (1 << 2)
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1 (1 << 1)
-+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE (1 << 0)
-+
-+#endif /* _ASM_UBICOM32_UBICOM32FB_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32hid.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32hid.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32hid.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32hid.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,133 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32hid.h
-+ * Ubicom32 architecture HID driver platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_HID_H
-+#define _ASM_UBICOM32_UBICOM32_HID_H
-+
-+enum ubicom32hid_bl_types {
-+ /*
-+ * On or off, using command SET_BL_EN, PB4
-+ */
-+ UBICOM32HID_BL_TYPE_BINARY,
-+
-+ /*
-+ * Dimmable, using command SET_PWM, PB3
-+ */
-+ UBICOM32HID_BL_TYPE_PWM,
-+};
-+
-+/*
-+ * IR code mapping to event code.
-+ * If there are no button mappings and no ir mappings
-+ * then no input driver will be registered.
-+ */
-+struct ubicom32hid_ir {
-+ /*
-+ * Input event code (KEY_*, SW_*, etc)
-+ */
-+ int code;
-+
-+ /*
-+ * Input event type (EV_KEY, EV_SW, etc)
-+ */
-+ int type;
-+
-+ /*
-+ * The IR code of this button.
-+ */
-+ uint32_t ir_code;
-+};
-+
-+/*
-+ * Button mapping to event code.
-+ * If there are no button mappings and no ir mappings
-+ * then no input driver will be registered.
-+ */
-+struct ubicom32hid_button {
-+ /*
-+ * Input event code (KEY_*, SW_*, etc)
-+ */
-+ int code;
-+
-+ /*
-+ * Input event type (EV_KEY, EV_SW, etc)
-+ */
-+ int type;
-+
-+ /*
-+ * Bit number of this button.
-+ */
-+ uint8_t bit;
-+};
-+
-+struct ubicom32hid_platform_data {
-+ /*
-+ * Default intensity of the backlight 0-255
-+ */
-+ u8_t default_intensity;
-+
-+ /*
-+ * GPIO number of the reset line and its polarity.
-+ */
-+ unsigned gpio_reset;
-+ int gpio_reset_polarity;
-+
-+ /*
-+ * TRUE if the backlight sense is active low. (inverted)
-+ * FALSE if the backlight sense is active high.
-+ */
-+ bool invert;
-+
-+ /*
-+ * Type of the backlight we are controlling
-+ */
-+ enum ubicom32hid_bl_types type;
-+
-+ /*
-+ * Optional polling rate for input, in ms, defaults to 100ms
-+ */
-+ int poll_interval;
-+
-+ /*
-+ * Optional name to register as input device
-+ */
-+ const char *input_name;
-+
-+ /*
-+ * Button mapping array
-+ */
-+ const struct ubicom32hid_button *buttons;
-+ int nbuttons;
-+
-+ /*
-+ * IR mapping array
-+ */
-+ const struct ubicom32hid_ir *ircodes;
-+ int nircodes;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_HID_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32input.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32input.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32input.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32input.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,76 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32input.h
-+ * Ubicom32 Input driver, based on gpio-keys
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * TODO: add groups for inputs which can be sampled together
-+ */
-+
-+#ifndef _ASM_UBICOM32_UBICOM32_INPUT_H
-+#define _ASM_UBICOM32_UBICOM32_INPUT_H
-+
-+struct ubicom32input_button {
-+ /*
-+ * Input event code (KEY_*, SW_*, etc)
-+ */
-+ int code;
-+
-+ /*
-+ * Input event type (EV_KEY, EV_SW, etc)
-+ */
-+ int type;
-+
-+ /*
-+ * GPIO to poll
-+ */
-+ int gpio;
-+
-+ /*
-+ * 1 for active low, 0 for active high
-+ */
-+ int active_low;
-+
-+ /*
-+ * Description, used for reserving GPIOs
-+ */
-+ const char *desc;
-+};
-+
-+struct ubicom32input_platform_data {
-+ struct ubicom32input_button *buttons;
-+ int nbuttons;
-+
-+ /*
-+ * Optional poll interval, in ms, defaults to 50ms
-+ */
-+ int poll_interval;
-+
-+ /*
-+ * Option Name of this driver
-+ */
-+ const char *name;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_INPUT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32input_i2c.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32input_i2c.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32input_i2c.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32input_i2c.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32input_i2c.h
-+ * Ubicom32 architecture Input driver over I2C platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * TODO: add groups for inputs which can be sampled together
-+ */
-+
-+#ifndef _ASM_UBICOM32_UBICOM32_INPUT_I2C_H
-+#define _ASM_UBICOM32_UBICOM32_INPUT_I2C_H
-+
-+struct ubicom32input_i2c_button {
-+ /*
-+ * Input event code (KEY_*, SW_*, etc)
-+ */
-+ int code;
-+
-+ /*
-+ * Input event type (EV_KEY, EV_SW, etc)
-+ */
-+ int type;
-+
-+ /*
-+ * Bit number of this button. (0 - ngpio)
-+ */
-+ int bit;
-+
-+ /*
-+ * 1 for active low, 0 for active high
-+ */
-+ int active_low;
-+};
-+
-+struct ubicom32input_i2c_platform_data {
-+ struct ubicom32input_i2c_button *buttons;
-+ int nbuttons;
-+
-+ /*
-+ * Optional poll interval, in ms, defaults to 100ms
-+ */
-+ int poll_interval;
-+
-+ /*
-+ * Option Name of this driver
-+ */
-+ const char *name;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_INPUT_I2C_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32lcd.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32lcd.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32lcd.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32lcd.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32lcd.h
-+ * Ubicom32 architecture LCD driver platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_LCD_H
-+#define _ASM_UBICOM32_UBICOM32_LCD_H
-+
-+#include <asm/ip5000.h>
-+
-+struct ubicom32lcd_platform_data {
-+ int pin_cs;
-+ int pin_rs;
-+ int pin_rd;
-+ int pin_wr;
-+ int pin_reset;
-+ int data_shift;
-+ struct ubicom32_io_port *port_data;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_LCD_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32lcdpower.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32lcdpower.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32lcdpower.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32lcdpower.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,39 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32lcdpower.h
-+ * Ubicom32 architecture LCD driver platform data definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_LCDPOWER_H
-+#define _ASM_UBICOM32_UBICOM32_LCDPOWER_H
-+
-+struct ubicom32lcdpower_platform_data {
-+ /*
-+ * GPIO and polarity for VGH signal. A FALSE polarity is active low, TRUE is active high.
-+ */
-+ int vgh_gpio;
-+ bool vgh_polarity;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_LCDPOWER_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32ring.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32ring.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32ring.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32ring.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,103 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32ring.h
-+ * Userspace I/O platform driver for Ubicom32 ring buffers
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _ASM_UBICOM32_UBICOM32RING_H
-+#define _ASM_UBICOM32_UBICOM32RING_H
-+
-+#define UIO_UBICOM32RING_REG_VERSION 2
-+
-+struct uio_ubicom32ring_desc {
-+ volatile unsigned int head;
-+ volatile unsigned int tail;
-+ unsigned int entries;
-+ volatile unsigned int ring[0];
-+};
-+
-+struct uio_ubicom32ring_regs {
-+ unsigned int version;
-+
-+ /*
-+ * Magic type used to identify the ring set. Each driver will
-+ * have a different magic value.
-+ */
-+ unsigned int magic;
-+
-+ /*
-+ * Registers defined by the driver
-+ */
-+ unsigned int regs_size;
-+ void *regs;
-+
-+ /*
-+ * The locations of the rings
-+ *
-+ * DO NOT ADD ANYTHING BELOW THIS LINE
-+ */
-+ unsigned int num_rings;
-+ struct uio_ubicom32ring_desc *rings[0];
-+};
-+
-+/*
-+ * ringtio_ring_flush
-+ */
-+static inline void ringtio_ring_flush(struct uio_ubicom32ring_desc *rd)
-+{
-+ rd->head = rd->tail = 0;
-+}
-+
-+/*
-+ * ringtio_ring_get
-+ */
-+static inline int ringtio_ring_get(struct uio_ubicom32ring_desc *rd, void **val)
-+{
-+ if (rd->head == rd->tail) {
-+ return 0;
-+ }
-+
-+ *val = (void *)rd->ring[rd->head++];
-+ if (rd->head == rd->entries) {
-+ rd->head = 0;
-+ }
-+ return 1;
-+}
-+
-+/*
-+ * ringtio_ring_put
-+ */
-+static inline int ringtio_ring_put(struct uio_ubicom32ring_desc *rd, void *val)
-+{
-+ unsigned int newtail = rd->tail + 1;
-+ if (newtail == rd->entries) {
-+ newtail = 0;
-+ }
-+
-+ if (newtail == rd->head) {
-+ return 0;
-+ }
-+
-+ rd->ring[rd->tail] = (unsigned int)val;
-+ rd->tail = newtail;
-+ return 1;
-+}
-+
-+#endif /* _ASM_UBICOM32_UBICOM32RING_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32sd.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32sd.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32sd.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32sd.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,45 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32sd.h
-+ * Ubicom32SD public include file
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_SD_H
-+#define _ASM_UBICOM32_UBICOM32_SD_H
-+
-+struct ubicom32sd_card {
-+ /*
-+ * GPIOs of PWR, WP and CD lines.
-+ * Polarity is 1 for active high and 0 for active low
-+ */
-+ int pin_pwr;
-+ bool pwr_polarity;
-+ int pin_wp;
-+ bool wp_polarity;
-+ int pin_cd;
-+ bool cd_polarity;
-+};
-+
-+struct ubicom32sd_platform_data {
-+ int ncards;
-+
-+ struct ubicom32sd_card *cards;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_SD_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-spi-gpio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-spi-gpio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-spi-gpio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-spi-gpio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32-spi-gpio.h
-+ * Platform driver data definitions for GPIO based SPI driver.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_SPI_GPIO_H
-+#define _ASM_UBICOM32_UBICOM32_SPI_GPIO_H
-+
-+struct ubicom32_spi_gpio_platform_data {
-+ /*
-+ * GPIO to use for MOSI, MISO, CLK
-+ */
-+ int pin_mosi;
-+ int pin_miso;
-+ int pin_clk;
-+
-+ /*
-+ * Default state of CLK line
-+ */
-+ int clk_default;
-+
-+ /*
-+ * Number of chip selects on this bus
-+ */
-+ int num_chipselect;
-+
-+ /*
-+ * The bus number of this chip
-+ */
-+ int bus_num;
-+};
-+
-+struct ubicom32_spi_gpio_controller_data {
-+ /*
-+ * GPIO to use for chip select
-+ */
-+ int pin_cs;
-+};
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_SPI_GPIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32suart.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32suart.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32suart.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32suart.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32suart.h
-+ * <TODO: Replace with short file description>
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_SUART_H
-+#define _ASM_UBICOM32_UBICOM32_SUART_H
-+
-+/*
-+ * Platform resource id for serdes uart clock parameter
-+ */
-+#define UBICOM32_SUART_IORESOURCE_CLOCK (1)
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_SUART_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-tio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-tio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ubicom32-tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ubicom32-tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,42 @@
-+/*
-+ * arch/ubicom32/include/asm/ubicom32-tio.h
-+ * Threaded I/O interface definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UBICOM32_TIO_H
-+#define _ASM_UBICOM32_UBICOM32_TIO_H
-+
-+extern u8_t usb_tio_read_u16(u32_t address, u16_t *data);
-+extern u8_t usb_tio_read_u8(u32_t address, u8_t *data);
-+
-+extern u8_t usb_tio_write_u16(u32_t address, u16_t data);
-+extern u8_t usb_tio_write_u8(u32_t address, u8_t data);
-+
-+extern u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes);
-+extern u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes);
-+extern u8_t usb_tio_write_fifo_sync(u32_t address, u32_t buffer, u32_t bytes);
-+extern void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx);
-+
-+#endif /* _ASM_UBICOM32_UBICOM32_TIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/ucontext.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ucontext.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/ucontext.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/ucontext.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,39 @@
-+/*
-+ * arch/ubicom32/include/asm/ucontext.h
-+ * Definition of ucontext structure for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UCONTEXT_H
-+#define _ASM_UBICOM32_UCONTEXT_H
-+
-+struct ucontext {
-+ unsigned long uc_flags;
-+ struct ucontext *uc_link;
-+ stack_t uc_stack;
-+ struct sigcontext uc_mcontext;
-+ sigset_t uc_sigmask; /* mask last for extensibility */
-+};
-+
-+#endif /* _ASM_UBICOM32_UCONTEXT_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/unaligned.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/unaligned.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/unaligned.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/unaligned.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,44 @@
-+/*
-+ * arch/ubicom32/include/asm/unaligned.h
-+ * Ubicom32 architecture unaligned memory access definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * TODO: This is a copy of arm unaligned handling that probably needs
-+ * to be optimized for UBICOM32, but it works for now.
-+ */
-+
-+#ifndef _ASM_UBICOM32_UNALIGNED_H
-+#define _ASM_UBICOM32_UNALIGNED_H
-+
-+#include <asm/types.h>
-+
-+#include <linux/unaligned/le_byteshift.h>
-+#include <linux/unaligned/be_byteshift.h>
-+#include <linux/unaligned/generic.h>
-+
-+#define get_unaligned __get_unaligned_be
-+#define put_unaligned __put_unaligned_be
-+
-+#endif /* _ASM_UBICOM32_UNALIGNED_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/unistd.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/unistd.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/unistd.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/unistd.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,400 @@
-+/*
-+ * arch/ubicom32/include/asm/unistd.h
-+ * Ubicom32 architecture syscall definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_UNISTD_H
-+#define _ASM_UBICOM32_UNISTD_H
-+
-+/*
-+ * This file contains the system call numbers.
-+ */
-+
-+#define __NR_restart_syscall 0
-+#define __NR_exit 1
-+#define __NR_fork 2
-+#define __NR_read 3
-+#define __NR_write 4
-+#define __NR_open 5
-+#define __NR_close 6
-+#define __NR_waitpid 7
-+#define __NR_creat 8
-+#define __NR_link 9
-+#define __NR_unlink 10
-+#define __NR_execve 11
-+#define __NR_chdir 12
-+#define __NR_time 13
-+#define __NR_mknod 14
-+#define __NR_chmod 15
-+#define __NR_chown 16
-+#define __NR_break 17
-+#define __NR_oldstat 18
-+#define __NR_lseek 19
-+#define __NR_getpid 20
-+#define __NR_mount 21
-+#define __NR_umount 22
-+#define __NR_setuid 23
-+#define __NR_getuid 24
-+#define __NR_stime 25
-+#define __NR_ptrace 26
-+#define __NR_alarm 27
-+#define __NR_oldfstat 28
-+#define __NR_pause 29
-+#define __NR_utime 30
-+#define __NR_stty 31
-+#define __NR_gtty 32
-+#define __NR_access 33
-+#define __NR_nice 34
-+#define __NR_ftime 35
-+#define __NR_sync 36
-+#define __NR_kill 37
-+#define __NR_rename 38
-+#define __NR_mkdir 39
-+#define __NR_rmdir 40
-+#define __NR_dup 41
-+#define __NR_pipe 42
-+#define __NR_times 43
-+#define __NR_prof 44
-+#define __NR_brk 45
-+#define __NR_setgid 46
-+#define __NR_getgid 47
-+#define __NR_signal 48
-+#define __NR_geteuid 49
-+#define __NR_getegid 50
-+#define __NR_acct 51
-+#define __NR_umount2 52
-+#define __NR_lock 53
-+#define __NR_ioctl 54
-+#define __NR_fcntl 55
-+#define __NR_mpx 56
-+#define __NR_setpgid 57
-+#define __NR_ulimit 58
-+#define __NR_oldolduname 59
-+#define __NR_umask 60
-+#define __NR_chroot 61
-+#define __NR_ustat 62
-+#define __NR_dup2 63
-+#define __NR_getppid 64
-+#define __NR_getpgrp 65
-+#define __NR_setsid 66
-+#define __NR_sigaction 67
-+#define __NR_sgetmask 68
-+#define __NR_ssetmask 69
-+#define __NR_setreuid 70
-+#define __NR_setregid 71
-+#define __NR_sigsuspend 72
-+#define __NR_sigpending 73
-+#define __NR_sethostname 74
-+#define __NR_setrlimit 75
-+#define __NR_getrlimit 76
-+#define __NR_getrusage 77
-+#define __NR_gettimeofday 78
-+#define __NR_settimeofday 79
-+#define __NR_getgroups 80
-+#define __NR_setgroups 81
-+#define __NR_select 82
-+#define __NR_symlink 83
-+#define __NR_oldlstat 84
-+#define __NR_readlink 85
-+#define __NR_uselib 86
-+#define __NR_swapon 87
-+#define __NR_reboot 88
-+#define __NR_readdir 89
-+#define __NR_mmap 90
-+#define __NR_munmap 91
-+#define __NR_truncate 92
-+#define __NR_ftruncate 93
-+#define __NR_fchmod 94
-+#define __NR_fchown 95
-+#define __NR_getpriority 96
-+#define __NR_setpriority 97
-+#define __NR_profil 98
-+#define __NR_statfs 99
-+#define __NR_fstatfs 100
-+#define __NR_ioperm 101
-+#define __NR_socketcall 102
-+#define __NR_syslog 103
-+#define __NR_setitimer 104
-+#define __NR_getitimer 105
-+#define __NR_stat 106
-+#define __NR_lstat 107
-+#define __NR_fstat 108
-+#define __NR_olduname 109
-+#define __NR_iopl /* 110 */ not supported
-+#define __NR_vhangup 111
-+#define __NR_idle /* 112 */ Obsolete
-+#define __NR_vm86 /* 113 */ not supported
-+#define __NR_wait4 114
-+#define __NR_swapoff 115
-+#define __NR_sysinfo 116
-+#define __NR_ipc 117
-+#define __NR_fsync 118
-+#define __NR_sigreturn 119
-+#define __NR_clone 120
-+#define __NR_setdomainname 121
-+#define __NR_uname 122
-+#define __NR_cacheflush 123
-+#define __NR_adjtimex 124
-+#define __NR_mprotect 125
-+#define __NR_sigprocmask 126
-+#define __NR_create_module 127
-+#define __NR_init_module 128
-+#define __NR_delete_module 129
-+#define __NR_get_kernel_syms 130
-+#define __NR_quotactl 131
-+#define __NR_getpgid 132
-+#define __NR_fchdir 133
-+#define __NR_bdflush 134
-+#define __NR_sysfs 135
-+#define __NR_personality 136
-+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-+#define __NR_setfsuid 138
-+#define __NR_setfsgid 139
-+#define __NR__llseek 140
-+#define __NR_getdents 141
-+#define __NR__newselect 142
-+#define __NR_flock 143
-+#define __NR_msync 144
-+#define __NR_readv 145
-+#define __NR_writev 146
-+#define __NR_getsid 147
-+#define __NR_fdatasync 148
-+#define __NR__sysctl 149
-+#define __NR_mlock 150
-+#define __NR_munlock 151
-+#define __NR_mlockall 152
-+#define __NR_munlockall 153
-+#define __NR_sched_setparam 154
-+#define __NR_sched_getparam 155
-+#define __NR_sched_setscheduler 156
-+#define __NR_sched_getscheduler 157
-+#define __NR_sched_yield 158
-+#define __NR_sched_get_priority_max 159
-+#define __NR_sched_get_priority_min 160
-+#define __NR_sched_rr_get_interval 161
-+#define __NR_nanosleep 162
-+#define __NR_mremap 163
-+#define __NR_setresuid 164
-+#define __NR_getresuid 165
-+#define __NR_getpagesize 166
-+#define __NR_query_module 167
-+#define __NR_poll 168
-+#define __NR_nfsservctl 169
-+#define __NR_setresgid 170
-+#define __NR_getresgid 171
-+#define __NR_prctl 172
-+#define __NR_rt_sigreturn 173
-+#define __NR_rt_sigaction 174
-+#define __NR_rt_sigprocmask 175
-+#define __NR_rt_sigpending 176
-+#define __NR_rt_sigtimedwait 177
-+#define __NR_rt_sigqueueinfo 178
-+#define __NR_rt_sigsuspend 179
-+#define __NR_pread64 180
-+#define __NR_pwrite64 181
-+#define __NR_lchown 182
-+#define __NR_getcwd 183
-+#define __NR_capget 184
-+#define __NR_capset 185
-+#define __NR_sigaltstack 186
-+#define __NR_sendfile 187
-+#define __NR_getpmsg 188 /* some people actually want streams */
-+#define __NR_putpmsg 189 /* some people actually want streams */
-+#define __NR_vfork 190
-+#define __NR_ugetrlimit 191
-+#define __NR_mmap2 192
-+#define __NR_truncate64 193
-+#define __NR_ftruncate64 194
-+#define __NR_stat64 195
-+#define __NR_lstat64 196
-+#define __NR_fstat64 197
-+#define __NR_chown32 198
-+#define __NR_getuid32 199
-+#define __NR_getgid32 200
-+#define __NR_geteuid32 201
-+#define __NR_getegid32 202
-+#define __NR_setreuid32 203
-+#define __NR_setregid32 204
-+#define __NR_getgroups32 205
-+#define __NR_setgroups32 206
-+#define __NR_fchown32 207
-+#define __NR_setresuid32 208
-+#define __NR_getresuid32 209
-+#define __NR_setresgid32 210
-+#define __NR_getresgid32 211
-+#define __NR_lchown32 212
-+#define __NR_setuid32 213
-+#define __NR_setgid32 214
-+#define __NR_setfsuid32 215
-+#define __NR_setfsgid32 216
-+#define __NR_pivot_root 217
-+#define __NR_getdents64 220
-+#define __NR_gettid 221
-+#define __NR_tkill 222
-+#define __NR_setxattr 223
-+#define __NR_lsetxattr 224
-+#define __NR_fsetxattr 225
-+#define __NR_getxattr 226
-+#define __NR_lgetxattr 227
-+#define __NR_fgetxattr 228
-+#define __NR_listxattr 229
-+#define __NR_llistxattr 230
-+#define __NR_flistxattr 231
-+#define __NR_removexattr 232
-+#define __NR_lremovexattr 233
-+#define __NR_fremovexattr 234
-+#define __NR_futex 235
-+#define __NR_sendfile64 236
-+#define __NR_mincore 237
-+#define __NR_madvise 238
-+#define __NR_fcntl64 239
-+#define __NR_readahead 240
-+#define __NR_io_setup 241
-+#define __NR_io_destroy 242
-+#define __NR_io_getevents 243
-+#define __NR_io_submit 244
-+#define __NR_io_cancel 245
-+#define __NR_fadvise64 246
-+#define __NR_exit_group 247
-+#define __NR_lookup_dcookie 248
-+#define __NR_epoll_create 249
-+#define __NR_epoll_ctl 250
-+#define __NR_epoll_wait 251
-+#define __NR_remap_file_pages 252
-+#define __NR_set_tid_address 253
-+#define __NR_timer_create 254
-+#define __NR_timer_settime 255
-+#define __NR_timer_gettime 256
-+#define __NR_timer_getoverrun 257
-+#define __NR_timer_delete 258
-+#define __NR_clock_settime 259
-+#define __NR_clock_gettime 260
-+#define __NR_clock_getres 261
-+#define __NR_clock_nanosleep 262
-+#define __NR_statfs64 263
-+#define __NR_fstatfs64 264
-+#define __NR_tgkill 265
-+#define __NR_utimes 266
-+#define __NR_fadvise64_64 267
-+#define __NR_mbind 268
-+#define __NR_get_mempolicy 269
-+#define __NR_set_mempolicy 270
-+#define __NR_mq_open 271
-+#define __NR_mq_unlink 272
-+#define __NR_mq_timedsend 273
-+#define __NR_mq_timedreceive 274
-+#define __NR_mq_notify 275
-+#define __NR_mq_getsetattr 276
-+#define __NR_waitid 277
-+#define __NR_vserver 278
-+#define __NR_add_key 279
-+#define __NR_request_key 280
-+#define __NR_keyctl 281
-+#define __NR_ioprio_set 282
-+#define __NR_ioprio_get 283
-+#define __NR_inotify_init 284
-+#define __NR_inotify_add_watch 285
-+#define __NR_inotify_rm_watch 286
-+#define __NR_migrate_pages 287
-+#define __NR_openat 288
-+#define __NR_mkdirat 289
-+#define __NR_mknodat 290
-+#define __NR_fchownat 291
-+#define __NR_futimesat 292
-+#define __NR_fstatat64 293
-+#define __NR_unlinkat 294
-+#define __NR_renameat 295
-+#define __NR_linkat 296
-+#define __NR_symlinkat 297
-+#define __NR_readlinkat 298
-+#define __NR_fchmodat 299
-+#define __NR_faccessat 300
-+#define __NR_pselect6 301
-+#define __NR_ppoll 302
-+#define __NR_unshare 303
-+#define __NR_set_robust_list 304
-+#define __NR_get_robust_list 305
-+#define __NR_splice 306
-+#define __NR_sync_file_range 307
-+#define __NR_tee 308
-+#define __NR_vmsplice 309
-+#define __NR_move_pages 310
-+#define __NR_sched_setaffinity 311
-+#define __NR_sched_getaffinity 312
-+#define __NR_kexec_load 313
-+#define __NR_getcpu 314
-+#define __NR_epoll_pwait 315
-+#define __NR_utimensat 316
-+#define __NR_signalfd 317
-+#define __NR_timerfd_create 318
-+#define __NR_eventfd 319
-+#define __NR_fallocate 320
-+#define __NR_timerfd_settime 321
-+#define __NR_timerfd_gettime 322
-+#define __NR_signalfd4 323
-+#define __NR_eventfd2 324
-+#define __NR_epoll_create1 325
-+#define __NR_dup3 326
-+#define __NR_pipe2 327
-+#define __NR_inotify_init1 328
-+
-+#ifdef __KERNEL__
-+
-+#define NR_syscalls 329
-+
-+#define __ARCH_WANT_IPC_PARSE_VERSION
-+#define __ARCH_WANT_OLD_READDIR
-+#define __ARCH_WANT_OLD_STAT
-+#define __ARCH_WANT_STAT64
-+#define __ARCH_WANT_SYS_ALARM
-+#define __ARCH_WANT_SYS_GETHOSTNAME
-+#define __ARCH_WANT_SYS_PAUSE
-+#define __ARCH_WANT_SYS_SGETMASK
-+#define __ARCH_WANT_SYS_SIGNAL
-+#define __ARCH_WANT_SYS_TIME
-+#define __ARCH_WANT_SYS_UTIME
-+#define __ARCH_WANT_SYS_WAITPID
-+#define __ARCH_WANT_SYS_SOCKETCALL
-+#define __ARCH_WANT_SYS_FADVISE64
-+#define __ARCH_WANT_SYS_GETPGRP
-+#define __ARCH_WANT_SYS_LLSEEK
-+#define __ARCH_WANT_SYS_NICE
-+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-+#define __ARCH_WANT_SYS_OLDUMOUNT
-+#define __ARCH_WANT_SYS_SIGPENDING
-+#define __ARCH_WANT_SYS_SIGPROCMASK
-+#define __ARCH_WANT_SYS_RT_SIGACTION
-+
-+/*
-+ * "Conditional" syscalls
-+ *
-+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
-+ * but it doesn't work on all toolchains, so we just do it by hand
-+ */
-+//#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-+#define cond_syscall(x) long x(void) __attribute__((weak,alias("sys_ni_syscall")))
-+#endif /* __KERNEL__ */
-+
-+#endif /* _ASM_UBICOM32_UNISTD_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/user.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/user.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/user.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/user.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,82 @@
-+/*
-+ * arch/ubicom32/include/asm/user.h
-+ * Ubicom32 architecture core file definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_USER_H
-+#define _ASM_UBICOM32_USER_H
-+
-+#include <asm/ptrace.h>
-+#include <asm/page.h>
-+/*
-+ * Adapted from <asm-powerpc/user.h>
-+ *
-+ * Core file format: The core file is written in such a way that gdb
-+ * can understand it and provide useful information to the user (under
-+ * linux we use the `trad-core' bfd, NOT the osf-core). The file contents
-+ * are as follows:
-+ *
-+ * upage: 1 page consisting of a user struct that tells gdb
-+ * what is present in the file. Directly after this is a
-+ * copy of the task_struct, which is currently not used by gdb,
-+ * but it may come in handy at some point. All of the registers
-+ * are stored as part of the upage. The upage should always be
-+ * only one page long.
-+ * data: The data segment follows next. We use current->end_text to
-+ * current->brk to pick up all of the user variables, plus any memory
-+ * that may have been sbrk'ed. No attempt is made to determine if a
-+ * page is demand-zero or if a page is totally unused, we just cover
-+ * the entire range. All of the addresses are rounded in such a way
-+ * that an integral number of pages is written.
-+ * stack: We need the stack information in order to get a meaningful
-+ * backtrace. We need to write the data from usp to
-+ * current->start_stack, so we round each of these in order to be able
-+ * to write an integer number of pages.
-+ */
-+
-+struct user_ubicom32fp_struct {
-+};
-+
-+struct user {
-+ struct pt_regs regs; /* entire machine state */
-+ size_t u_tsize; /* text size (pages) */
-+ size_t u_dsize; /* data size (pages) */
-+ size_t u_ssize; /* stack size (pages) */
-+ unsigned long start_code; /* text starting address */
-+ unsigned long start_data; /* data starting address */
-+ unsigned long start_stack; /* stack starting address */
-+ long int signal; /* signal causing core dump */
-+ unsigned long u_ar0; /* help gdb find registers */
-+ unsigned long magic; /* identifies a core file */
-+ char u_comm[32]; /* user command name */
-+};
-+
-+#define NBPG PAGE_SIZE
-+#define UPAGES 1
-+#define HOST_TEXT_START_ADDR (u.start_code)
-+#define HOST_DATA_START_ADDR (u.start_data)
-+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-+
-+#endif /* _ASM_UBICOM32_USER_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/vdc_tio.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/vdc_tio.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/vdc_tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/vdc_tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,129 @@
-+/*
-+ * arch/ubicom32/include/asm/vdc_tio.h
-+ * Ubicom32 architecture VDC TIO definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_VDC_TIO_H
-+#define _ASM_UBICOM32_VDC_TIO_H
-+
-+#include <asm/devtree.h>
-+
-+#define VDCTIO_VP_VERSION 5
-+
-+#define VDCTIO_SCALE_FLAG_VSUB (1 << 9)
-+#define VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER (1 << 8)
-+#define VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER (1 << 7)
-+#define VDCTIO_SCALE_FLAG_YUV (1 << 6)
-+#define VDCTIO_SCALE_FLAG_VRANGE_16_255 (1 << 5)
-+#define VDCTIO_SCALE_FLAG_VRANGE_0_255 (1 << 4)
-+#define VDCTIO_SCALE_FLAG_HSUB_2_1 (1 << 3)
-+#define VDCTIO_SCALE_FLAG_HSUB_1_1 (1 << 2)
-+#define VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER (1 << 1)
-+#define VDCTIO_SCALE_FLAG_ENABLE (1 << 0)
-+
-+#define VDCTIO_NEXT_FRAME_FLAG_YUV_BIT 0
-+#define VDCTIO_NEXT_FRAME_FLAG_YUV (1 << (VDCTIO_NEXT_FRAME_FLAG_YUV_BIT))
-+
-+#define VDCTIO_CAPS_SUPPORTS_SCALING (1 << 0)
-+
-+#define VDCTIO_COMMAND_START (1 << 3)
-+#define VDCTIO_COMMAND_SET_COEFF (1 << 2)
-+#define VDCTIO_COMMAND_SET_LUT (1 << 1)
-+#define VDCTIO_COMMAND_SET_SCALE_MODE (1 << 0)
-+
-+/*
-+ * Command / Data registers to access the VDC
-+ */
-+struct vdc_tio_vp_regs {
-+ /*
-+ * Version of this TIO register map
-+ */
-+ u32_t version;
-+
-+ volatile u32_t command;
-+
-+ /*
-+ * Next frame pointer, when the command VDCTIO_COMMAND_SET_FRAME_BUFFER is set,
-+ * the vdc will take the pointer here and display it.
-+ */
-+ void *next_frame;
-+ u32_t next_frame_flags;
-+
-+ /*
-+ * These map directly into the PIXP registers 0x20-0x80.
-+ * DO NOT change the order of these three variables.
-+ */
-+ u32_t red_lut[6];
-+ u32_t blue_lut[6];
-+ u32_t green_lut[13];
-+
-+ /*
-+ * These map directly into the PIXP registers 0x04, 0x08
-+ */
-+ u32_t coeff0;
-+ u32_t coeff1;
-+
-+ /*
-+ * There are used to set the scaling parameters
-+ */
-+ u32_t x_in;
-+ u32_t x_out;
-+ u32_t y_in;
-+ u32_t y_out;
-+ u32_t scale_flags;
-+
-+ /*
-+ * Current frame number, monotonically increasing number
-+ */
-+ u32_t frame_number;
-+
-+ /*
-+ * These variables tell the guest OS what the underlying hardware looks like
-+ */
-+ u32_t caps;
-+ u32_t xres;
-+ u32_t yres;
-+ u32_t fb_align;
-+ u8_t bpp;
-+ u8_t rbits;
-+ u8_t gbits;
-+ u8_t bbits;
-+ u8_t rshift;
-+ u8_t gshift;
-+ u8_t bshift;
-+};
-+
-+/*
-+ * Devtree node for VDC
-+ */
-+struct vdc_tio_node {
-+ struct devtree_node dn;
-+
-+ struct vdc_tio_vp_regs *regs;
-+};
-+
-+extern void vdc_tio_init(void);
-+
-+#endif /* _ASM_UBICOM32_VDC_TIO_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/vga.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/vga.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/vga.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/vga.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/ubicom32/include/asm/vga.h
-+ * Ubicom32 low level VGA/frame buffer definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * (c) 1998 Martin Mares <mj@ucw.cz>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#ifndef _ASM_UBICOM32_VGA_H
-+#define _ASM_UBICOM32_VGA_H
-+
-+#include <asm/byteorder.h>
-+
-+/*
-+ * On the PC, we can just recalculate addresses and then
-+ * access the videoram directly without any black magic.
-+ */
-+
-+#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x))
-+
-+#define vga_readb(x) (*(x))
-+#define vga_writeb(x, y) (*(y) = (x))
-+
-+#define VT_BUF_HAVE_RW
-+/*
-+ * These are only needed for supporting VGA or MDA text mode, which use little
-+ * endian byte ordering.
-+ * In other cases, we can optimize by using native byte ordering and
-+ * <linux/vt_buffer.h> has already done the right job for us.
-+ */
-+
-+#undef scr_writew
-+#undef scr_readw
-+
-+static inline void scr_writew(u16 val, volatile u16 *addr)
-+{
-+ *addr = cpu_to_le16(val);
-+}
-+
-+static inline u16 scr_readw(volatile const u16 *addr)
-+{
-+ return le16_to_cpu(*addr);
-+}
-+
-+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
-+#define scr_memmovew(d, s, c) memmove(d, s, c)
-+#define VT_BUF_HAVE_MEMCPYW
-+#define VT_BUF_HAVE_MEMMOVEW
-+
-+#endif /* _ASM_UBICOM32_VGA_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/include/asm/xor.h linux-2.6.30.10-ubi/arch/ubicom32/include/asm/xor.h
---- linux-2.6.30.10/arch/ubicom32/include/asm/xor.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/include/asm/xor.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * arch/ubicom32/include/asm/xor.h
-+ * Generic xor.h definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _ASM_UBICOM32_XOR_H
-+#define _ASM_UBICOM32_XOR_H
-+
-+#include <asm-generic/xor.h>
-+
-+#endif /* _ASM_UBICOM32_XOR_H */
-diff -ruN linux-2.6.30.10/arch/ubicom32/Kconfig linux-2.6.30.10-ubi/arch/ubicom32/Kconfig
---- linux-2.6.30.10/arch/ubicom32/Kconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/Kconfig 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,403 @@
-+#
-+# For a description of the syntax of this configuration file,
-+# see Documentation/kbuild/kconfig-language.txt.
-+#
-+
-+mainmenu "uClinux/ubicom32 (w/o MMU) Kernel Configuration"
-+
-+config UBICOM32
-+ bool
-+ select HAVE_OPROFILE
-+ default y
-+
-+config RAMKERNEL
-+ bool
-+ default y
-+
-+config CPU_BIG_ENDIAN
-+ bool
-+ default y
-+
-+config FORCE_MAX_ZONEORDER
-+ int
-+ default "14"
-+
-+config HAVE_CLK
-+ bool
-+ default y
-+
-+config MMU
-+ bool
-+ default n
-+
-+config FPU
-+ bool
-+ default n
-+
-+config ZONE_DMA
-+ bool
-+ default y
-+
-+config RWSEM_GENERIC_SPINLOCK
-+ bool
-+ default y
-+
-+config RWSEM_XCHGADD_ALGORITHM
-+ bool
-+ default n
-+
-+config ARCH_HAS_ILOG2_U32
-+ bool
-+ default n
-+
-+config ARCH_HAS_ILOG2_U64
-+ bool
-+ default n
-+
-+config GENERIC_FIND_NEXT_BIT
-+ bool
-+ default y
-+
-+config GENERIC_GPIO
-+ bool
-+ default y
-+
-+config GPIOLIB
-+ bool
-+ default y
-+
-+config GENERIC_HWEIGHT
-+ bool
-+ default y
-+
-+config GENERIC_HARDIRQS
-+ bool
-+ default y
-+
-+config STACKTRACE_SUPPORT
-+ bool
-+ default y
-+
-+config LOCKDEP_SUPPORT
-+ bool
-+ default y
-+
-+config GENERIC_CALIBRATE_DELAY
-+ bool
-+ default y
-+
-+config GENERIC_TIME
-+ bool
-+ default y
-+
-+config TIME_LOW_RES
-+ bool
-+ default y
-+
-+config GENERIC_CLOCKEVENTS
-+ bool
-+ default y
-+
-+config GENERIC_CLOCKEVENTS_BROADCAST
-+ bool
-+ depends on GENERIC_CLOCKEVENTS
-+ default y if SMP && !LOCAL_TIMERS
-+
-+config NO_IOPORT
-+ def_bool y
-+
-+config ARCH_SUPPORTS_AOUT
-+ def_bool y
-+
-+config IRQ_PER_CPU
-+ bool
-+ default y
-+
-+config SCHED_NO_NO_OMIT_FRAME_POINTER
-+ bool
-+ default y
-+
-+config UBICOM32_PLIO
-+ bool
-+ default n
-+
-+menu "Processor type and features"
-+
-+comment "Processor type will be selected by Board"
-+
-+config UBICOM32_V3
-+ bool
-+ help
-+ Ubicom IP5xxx series processor support.
-+
-+config UBICOM32_V4
-+ bool
-+ help
-+ Ubicom IP7xxx series processor support.
-+
-+comment "Board"
-+choice
-+ prompt "Board type"
-+ help
-+ Select your board.
-+
-+config NOBOARD
-+ bool "No board selected"
-+ help
-+ Default. Don't select any board specific config. Will not build unless you change!
-+
-+# Add your boards here
-+source "arch/ubicom32/mach-ip5k/Kconfig"
-+source "arch/ubicom32/mach-ip7k/Kconfig"
-+
-+endchoice
-+
-+comment "Kernel Options"
-+config SMP
-+ bool "Symmetric multi-processing support"
-+ select USE_GENERIC_SMP_HELPERS
-+ default n
-+ help
-+ Enables multithreading support. Enabling SMP support increases
-+ the size of system data structures. SMP support can have either
-+ positive or negative impact on performance depending on workloads.
-+
-+ If you do not know what to do here, say N.
-+config OLD_40400010_SYSTEM_CALL
-+ bool "Provide old system call interface at 0x40400010"
-+ default y
-+ help
-+ Provides the old system call interface, does not affect the
-+ new system_call interface.
-+
-+config NR_CPUS
-+ int "Number of configured CPUs"
-+ range 2 32
-+ default 2
-+ depends on SMP
-+ help
-+ Upper bound on the number of CPUs. Space is reserved
-+ at compile time for this many CPUs.
-+
-+config LOCAL_TIMERS
-+ bool "Use local timer interrupts"
-+ depends on SMP
-+ default y
-+ help
-+ Enable support for local timers on SMP platforms, rather then the
-+ legacy IPI broadcast method. Local timers allows the system
-+ accounting to be spread across the timer interval, preventing a
-+ "thundering herd" at every timer tick. A physical timer is allocated
-+ per cpu.
-+
-+config TIMER_EXTRA_ALLOC
-+ int "Number of additional physical timer events to create"
-+ depends on GENERIC_CLOCKEVENTS
-+ default 0
-+ help
-+ The Ubicom32 processor has a number of event timers that can be wrapped
-+ in Linux clock event structures (assuming that the timers are not being
-+ used for another purpose). Based on the value of LOCAL_TIMERS, either
-+ 2 timers will be used or a timer will be used for every CPU. This value
-+ allows the programmer to select additional timers over that amount.
-+
-+config IRQSTACKS
-+ bool "Create separate stacks for interrupt handling"
-+ default n
-+ help
-+ Selecting this causes interrupts to be created on a separate
-+ stack instead of nesting the interrupts on the kernel stack.
-+
-+config IRQSTACKS_USEOCM
-+ bool "Use OCM for interrupt stacks"
-+ default n
-+ depends on IRQSTACKS
-+ help
-+ Selecting this cause the interrupt stacks to be placed in OCM
-+ reducing cache misses at the expense of using the OCM for servicing
-+ interrupts.
-+
-+menu "OCM Instruction Heap"
-+
-+config OCM_MODULES_RESERVATION
-+ int "OCM Instruction heap reservation. 0-192 kB"
-+ range 0 192
-+ default "0"
-+ help
-+ The minimum amount of OCM memory to reserve for kernel loadable module
-+ code. If you are not using this memory it cannot be used for anything
-+ else. Leave it as 0 if you have prebuilt modules that are compiled with
-+ OCM support.
-+
-+config OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
-+ bool "Give all unused ocm code space to the ocm instruction heap."
-+ default n
-+ help
-+ Allow the OCM instruction heap allocation to consume any remaining
-+ unused OCM code space. The result of this is that you will not have
-+ and deterministic results, but you will not have any waste either.
-+
-+config OCM_MODULES_FALLBACK_TO_DDR
-+ bool "Loadable Modules requiring OCM may fallback to use DDR."
-+ default n
-+ help
-+ If a module cannot get the OCM code it requires allow DDR to
-+ be used instead.
-+endmenu
-+
-+config HZ
-+ int "Frequency of 'jiffies' (for polling)"
-+ default 1000
-+ help
-+ 100 is common for embedded systems, but 1000 allows
-+ you to do more drivers without actually having
-+ interrupts working properly.
-+
-+comment "RAM configuration"
-+
-+config MIN_RAMSIZE
-+ hex "Minimum Size of RAM (in bytes)"
-+ range 0x01000000 0x08000000
-+ default "0x02000000"
-+ help
-+ Define the minimum acceptable size of the system
-+ RAM. Must be at least 16MB (0x01000000)
-+
-+comment "Build options"
-+config LINKER_RELAXATION
-+ bool "Linker Relaxation"
-+ default y
-+ help
-+ Turns on linker relaxation that will produce smaller
-+ faster code. Increases link time.
-+
-+comment "Driver options"
-+menu "PCI Bus"
-+config PCI
-+ bool "PCI bus"
-+ default true
-+ help
-+ Enable/Disable PCI bus
-+ source "drivers/pci/Kconfig"
-+
-+
-+config PCI_DEV0_IDSEL
-+ hex "slot 0 address"
-+ depends on PCI
-+ default "0x01000000"
-+ help
-+ Slot 0 address. This address should correspond to the address line
-+ which the IDSEL bit for this slot is connected to.
-+
-+config PCI_DEV1_IDSEL
-+ hex "slot 1 address"
-+ depends on PCI
-+ default "0x02000000"
-+ help
-+ Slot 1 address. This address should correspond to the address line
-+ which the IDSEL bit for this slot is connected to.
-+endmenu
-+# End PCI
-+
-+menu "Input devices"
-+config UBICOM_INPUT
-+ bool "Ubicom polled GPIO input driver"
-+ select INPUT
-+ select INPUT_POLLDEV
-+ help
-+ Polling input driver, much like the GPIO input driver, except that it doesn't
-+ rely on interrupts. It will report events via the input subsystem.
-+ default n
-+
-+config UBICOM_INPUT_I2C
-+ bool "Ubicom polled GPIO input driver over I2C"
-+ select INPUT
-+ select INPUT_POLLDEV
-+ help
-+ Polling input driver, much like the PCA953x driver, it can support a variety of
-+ different I2C I/O expanders. This device polls the I2C I/O expander for events
-+ and reports them via the input subsystem.
-+ default n
-+endmenu
-+# Input devices
-+
-+source "arch/ubicom32/mach-common/Kconfig.switch"
-+
-+menu "Misc devices"
-+config UBICOM_HID
-+ bool "Ubicom HID driver"
-+ select INPUT
-+ select INPUT_POLLDEV
-+ select LCD_CLASS_DEVICE
-+ help
-+ Driver for HID chip found on some Ubicom reference designs. This chip handles
-+ PWM, button input, and IR remote control. It registers as an input device and
-+ a backlight device.
-+ default n
-+endmenu
-+# Misc devices
-+
-+config CMDLINE_BOOL
-+ bool "Built-in kernel command line"
-+ default n
-+ help
-+ Allow for specifying boot arguments to the kernel at
-+ build time. On some systems (e.g. embedded ones), it is
-+ necessary or convenient to provide some or all of the
-+ kernel boot arguments with the kernel itself (that is,
-+ to not rely on the boot loader to provide them.)
-+
-+ To compile command line arguments into the kernel,
-+ set this option to 'Y', then fill in the
-+ the boot arguments in CONFIG_CMDLINE.
-+
-+ Systems with fully functional boot loaders (i.e. non-embedded)
-+ should leave this option set to 'N'.
-+
-+config CMDLINE
-+ string "Built-in kernel command string"
-+ depends on CMDLINE_BOOL
-+ default ""
-+ help
-+ Enter arguments here that should be compiled into the kernel
-+ image and used at boot time. If the boot loader provides a
-+ command line at boot time, it is appended to this string to
-+ form the full kernel command line, when the system boots.
-+
-+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
-+ change this behavior.
-+
-+ In most cases, the command line (whether built-in or provided
-+ by the boot loader) should specify the device for the root
-+ file system.
-+
-+config CMDLINE_OVERRIDE
-+ bool "Built-in command line overrides boot loader arguments"
-+ default n
-+ depends on CMDLINE_BOOL
-+ help
-+ Set this option to 'Y' to have the kernel ignore the boot loader
-+ command line, and use ONLY the built-in command line.
-+
-+ This is used to work around broken boot loaders. This should
-+ be set to 'N' under normal conditions.
-+
-+endmenu
-+# End Processor type and features
-+
-+source "arch/ubicom32/Kconfig.debug"
-+
-+menu "Executable file formats"
-+source "fs/Kconfig.binfmt"
-+endmenu
-+
-+source "init/Kconfig"
-+source "kernel/Kconfig.preempt"
-+source "kernel/time/Kconfig"
-+source "mm/Kconfig"
-+source "net/Kconfig"
-+source "drivers/Kconfig"
-+source "fs/Kconfig"
-+source "security/Kconfig"
-+source "crypto/Kconfig"
-+source "lib/Kconfig"
-diff -ruN linux-2.6.30.10/arch/ubicom32/Kconfig.debug linux-2.6.30.10-ubi/arch/ubicom32/Kconfig.debug
---- linux-2.6.30.10/arch/ubicom32/Kconfig.debug 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/Kconfig.debug 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,129 @@
-+menu "Kernel hacking"
-+
-+config TRACE_IRQFLAGS_SUPPORT
-+ def_bool y
-+
-+config DEBUG_VERBOSE
-+ bool "Verbose fault messages"
-+ default y
-+ select PRINTK
-+ help
-+ When a program crashes due to an exception, or the kernel detects
-+ an internal error, the kernel can print a not so brief message
-+ explaining what the problem was. This debugging information is
-+ useful to developers and kernel hackers when tracking down problems,
-+ but mostly meaningless to other people. This is always helpful for
-+ debugging but serves no purpose on a production system.
-+ Most people should say N here.
-+
-+config PROTECT_KERNEL
-+ default y
-+ bool 'Enable Kernel range register Protection'
-+ help
-+ Adds code to enable/disable range registers to protect static
-+ kernel code/data from userspace. Currently the ranges covered
-+ do no protect kernel loadable modules or dynamically allocated
-+ kernel data.
-+
-+config NO_KERNEL_MSG
-+ bool "Suppress Kernel BUG Messages"
-+ help
-+ Do not output any debug BUG messages within the kernel.
-+
-+config EARLY_PRINTK
-+ bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)."
-+ default n
-+ help
-+ If you want to use the serdes driver (console=ttyUS0) for
-+ early printk, you must also supply an additional kernel boot
-+ parameter like this:
-+
-+ serdes=ioportaddr,irq,clockrate,baud
-+
-+ For an IP7160RGW eval board, you could use this:
-+
-+ serdes=0x2004000,61,250000000,57600
-+
-+ which will let you see early printk output at 57600 baud.
-+
-+config STOP_ON_TRAP
-+ bool "Enable stopping at the LDSR for all traps"
-+ default n
-+ help
-+ Cause the LDSR to stop all threads whenever a trap is about to be serviced
-+
-+config STOP_ON_BUG
-+ bool "Enable stopping on failed BUG_ON()"
-+ default n
-+ help
-+ Cause all BUG_ON failures to stop all threads
-+
-+config DEBUG_IRQMEASURE
-+ bool "Enable IRQ handler measurements"
-+ default n
-+ help
-+ When enabled each IRQ's min/avg/max times will be printed. If the handler
-+ re-enables interrupt, the times will show the full time including to service
-+ nested interrupts. See /proc/irq_measurements.
-+
-+config DEBUG_PCIMEASURE
-+ bool "Enable PCI transaction measurements"
-+ default n
-+ help
-+ When enabled the system will measure the min/avg/max timer for each PCI transactions.
-+ See /proc/pci_measurements.
-+
-+config ACCESS_OK_CHECKS_ENABLED
-+ bool "Enable user space access checks"
-+ default n
-+ help
-+ Enabling this check causes the kernel to verify that addresses passed
-+ to the kernel by the user space code are within the processes
-+ address space. On a no-mmu system, this is done by examining the
-+ processes memory data structures (adversly affecting performance) but
-+ ensuring that a process does not ask the kernel to violate another
-+ processes address space. Sadly, the kernel uses access_ok() for
-+ address that are in the kernel which results in a large volume of
-+ false positives.
-+
-+choice
-+ prompt "Unaligned Access Support"
-+ default UNALIGNED_ACCESS_ENABLED
-+ help
-+ Kernel / Userspace unaligned access handling.
-+
-+config UNALIGNED_ACCESS_ENABLED
-+ bool "Kernel and Userspace"
-+ help
-+
-+config UNALIGNED_ACCESS_USERSPACE_ONLY
-+ bool "Userspace Only"
-+ help
-+
-+config UNALIGNED_ACCESS_DISABLED
-+ bool "Disabled"
-+ help
-+
-+endchoice
-+
-+config DEBUG_STACKOVERFLOW
-+ bool "Check for stack overflows"
-+ default n
-+ depends on DEBUG_KERNEL
-+ help
-+ This option will cause messages to be printed if free kernel stack space
-+ drops below a certain limit (THREAD_SIZE /8).
-+
-+config DEBUG_STACK_USAGE
-+ bool "Stack utilization instrumentation"
-+ default n
-+ depends on DEBUG_KERNEL
-+ help
-+ Enables the display of the minimum amount of free kernel stack which each
-+ task has ever had available in the sysrq-T and sysrq-P debug output.
-+
-+ This option will slow down process creation somewhat.
-+
-+source "lib/Kconfig.debug"
-+
-+endmenu
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/asm-offsets.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/asm-offsets.c
---- linux-2.6.30.10/arch/ubicom32/kernel/asm-offsets.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/asm-offsets.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,161 @@
-+/*
-+ * arch/ubicom32/kernel/asm-offsets.c
-+ * Ubicom32 architecture definitions needed by assembly language modules.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ * This program is used to generate definitions needed by
-+ * assembly language modules.
-+ *
-+ * We use the technique used in the OSF Mach kernel code:
-+ * generate asm statements containing #defines,
-+ * compile this file to assembler, and then extract the
-+ * #defines from the assembly-language output.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/stddef.h>
-+#include <linux/sched.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/ptrace.h>
-+#include <linux/hardirq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/thread_info.h>
-+
-+#define DEFINE(sym, val) \
-+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-+
-+#define BLANK() asm volatile("\n->" : : )
-+
-+int main(void)
-+{
-+ /* offsets into the task struct */
-+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
-+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
-+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
-+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
-+ DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
-+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
-+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
-+
-+ /* offsets into the kernel_stat struct */
-+// DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-+
-+ /* offsets into the irq_cpustat_t struct */
-+ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
-+
-+ /* offsets into the thread struct */
-+ DEFINE(THREAD_D10, offsetof(struct thread_struct, d10));
-+ DEFINE(THREAD_D11, offsetof(struct thread_struct, d11));
-+ DEFINE(THREAD_D12, offsetof(struct thread_struct, d12));
-+ DEFINE(THREAD_D13, offsetof(struct thread_struct, d13));
-+ DEFINE(THREAD_A1, offsetof(struct thread_struct, a1));
-+ DEFINE(THREAD_A2, offsetof(struct thread_struct, a2));
-+ DEFINE(THREAD_A5, offsetof(struct thread_struct, a5));
-+ DEFINE(THREAD_A6, offsetof(struct thread_struct, a6));
-+ DEFINE(THREAD_SP, offsetof(struct thread_struct, sp));
-+
-+ /* offsets into the pt_regs */
-+ DEFINE(PT_D0, offsetof(struct pt_regs, dn[0]));
-+ DEFINE(PT_D1, offsetof(struct pt_regs, dn[1]));
-+ DEFINE(PT_D2, offsetof(struct pt_regs, dn[2]));
-+ DEFINE(PT_D3, offsetof(struct pt_regs, dn[3]));
-+ DEFINE(PT_D4, offsetof(struct pt_regs, dn[4]));
-+ DEFINE(PT_D5, offsetof(struct pt_regs, dn[5]));
-+ DEFINE(PT_D6, offsetof(struct pt_regs, dn[6]));
-+ DEFINE(PT_D7, offsetof(struct pt_regs, dn[7]));
-+ DEFINE(PT_D8, offsetof(struct pt_regs, dn[8]));
-+ DEFINE(PT_D9, offsetof(struct pt_regs, dn[9]));
-+ DEFINE(PT_D10, offsetof(struct pt_regs, dn[10]));
-+ DEFINE(PT_D11, offsetof(struct pt_regs, dn[11]));
-+ DEFINE(PT_D12, offsetof(struct pt_regs, dn[12]));
-+ DEFINE(PT_D13, offsetof(struct pt_regs, dn[13]));
-+ DEFINE(PT_D14, offsetof(struct pt_regs, dn[14]));
-+ DEFINE(PT_D15, offsetof(struct pt_regs, dn[15]));
-+ DEFINE(PT_A0, offsetof(struct pt_regs, an[0]));
-+ DEFINE(PT_A1, offsetof(struct pt_regs, an[1]));
-+ DEFINE(PT_A2, offsetof(struct pt_regs, an[2]));
-+ DEFINE(PT_A3, offsetof(struct pt_regs, an[3]));
-+ DEFINE(PT_A4, offsetof(struct pt_regs, an[4]));
-+ DEFINE(PT_A5, offsetof(struct pt_regs, an[5]));
-+ DEFINE(PT_A6, offsetof(struct pt_regs, an[6]));
-+ DEFINE(PT_A7, offsetof(struct pt_regs, an[7]));
-+ DEFINE(PT_SP, offsetof(struct pt_regs, an[7]));
-+
-+ DEFINE(PT_ACC0HI, offsetof(struct pt_regs, acc0[0]));
-+ DEFINE(PT_ACC0LO, offsetof(struct pt_regs, acc0[1]));
-+ DEFINE(PT_MAC_RC16, offsetof(struct pt_regs, mac_rc16));
-+
-+ DEFINE(PT_ACC1HI, offsetof(struct pt_regs, acc1[0]));
-+ DEFINE(PT_ACC1LO, offsetof(struct pt_regs, acc1[1]));
-+
-+ DEFINE(PT_SOURCE3, offsetof(struct pt_regs, source3));
-+ DEFINE(PT_INST_CNT, offsetof(struct pt_regs, inst_cnt));
-+ DEFINE(PT_CSR, offsetof(struct pt_regs, csr));
-+ DEFINE(PT_DUMMY_UNUSED, offsetof(struct pt_regs, dummy_unused));
-+
-+ DEFINE(PT_INT_MASK0, offsetof(struct pt_regs, int_mask0));
-+ DEFINE(PT_INT_MASK1, offsetof(struct pt_regs, int_mask1));
-+
-+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-+
-+ DEFINE(PT_TRAP_CAUSE, offsetof(struct pt_regs, trap_cause));
-+
-+ DEFINE(PT_SIZE, sizeof(struct pt_regs));
-+
-+ DEFINE(PT_FRAME_TYPE, offsetof(struct pt_regs, frame_type));
-+
-+ DEFINE(PT_ORIGINAL_D0, offsetof(struct pt_regs, original_dn_0));
-+ DEFINE(PT_PREVIOUS_PC, offsetof(struct pt_regs, previous_pc));
-+
-+ /* offsets into the kernel_stat struct */
-+// DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-+
-+ /* signal defines */
-+ DEFINE(SIGSEGV, SIGSEGV);
-+ //DEFINE(SEGV_MAPERR, SEGV_MAPERR);
-+ DEFINE(SIGTRAP, SIGTRAP);
-+ //DEFINE(TRAP_TRACE, TRAP_TRACE);
-+
-+ DEFINE(PT_PTRACED, PT_PTRACED);
-+ DEFINE(PT_DTRACE, PT_DTRACE);
-+
-+ DEFINE(ASM_THREAD_SIZE, THREAD_SIZE);
-+
-+ /* Offsets in thread_info structure */
-+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
-+ DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
-+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-+ DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
-+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-+ DEFINE(TI_INTR_NESTING, offsetof(struct thread_info, interrupt_nesting));
-+ DEFINE(ASM_TIF_NEED_RESCHED, TIF_NEED_RESCHED);
-+ DEFINE(ASM_TIF_SYSCALL_TRACE, TIF_SYSCALL_TRACE);
-+ DEFINE(ASM_TIF_SIGPENDING, TIF_SIGPENDING);
-+
-+ return 0;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/devtree.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/devtree.c
---- linux-2.6.30.10/arch/ubicom32/kernel/devtree.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/devtree.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,173 @@
-+/*
-+ * arch/ubicom32/kernel/devtree.c
-+ * Ubicom32 architecture device tree implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/errno.h>
-+#include <asm/devtree.h>
-+
-+/*
-+ * The device tree.
-+ */
-+struct devtree_node *devtree;
-+
-+/*
-+ * devtree_print()
-+ * Print the device tree.
-+ */
-+void devtree_print(void)
-+{
-+ struct devtree_node *p = devtree;
-+ printk(KERN_INFO "Device Tree:\n");
-+ while (p) {
-+ if (p->magic != DEVTREE_NODE_MAGIC) {
-+ printk(KERN_EMERG
-+ "device tree has improper node: %p\n", p);
-+ return;
-+ }
-+ printk(KERN_INFO "\t%p: sendirq=%03d, recvirq=%03d, "
-+ " name=%s\n", p, p->sendirq, p->recvirq, p->name);
-+ p = p->next;
-+ }
-+}
-+EXPORT_SYMBOL(devtree_print);
-+
-+/*
-+ * devtree_irq()
-+ * Return the IRQ(s) associated with devtree node.
-+ */
-+int devtree_irq(struct devtree_node *dn,
-+ unsigned char *sendirq,
-+ unsigned char *recvirq)
-+{
-+ if (dn->magic != DEVTREE_NODE_MAGIC) {
-+ printk(KERN_EMERG "improper node: %p\n", dn);
-+ if (sendirq) {
-+ *sendirq = DEVTREE_IRQ_NONE;
-+ }
-+ if (recvirq) {
-+ *recvirq = DEVTREE_IRQ_NONE;
-+ }
-+ return -EFAULT;
-+ }
-+
-+ /*
-+ * Copy the devtree irq(s) to the output parameters.
-+ */
-+ if (sendirq) {
-+ *sendirq = dn->sendirq;
-+ }
-+ if (recvirq) {
-+ *recvirq = dn->recvirq;
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(devtree_irq);
-+
-+/*
-+ * devtree_find_next()
-+ * Provide an iterator for walking the device tree.
-+ */
-+struct devtree_node *devtree_find_next(struct devtree_node **cur)
-+{
-+ struct devtree_node *p = *cur;
-+ if (!p) {
-+ *cur = devtree;
-+ return devtree;
-+ }
-+ p = p->next;
-+ *cur = p;
-+ return p;
-+}
-+
-+/*
-+ * devtree_find_by_irq()
-+ * Return the node associated with a given irq.
-+ */
-+struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq)
-+{
-+ struct devtree_node *p = devtree;
-+
-+ if (sendirq == recvirq) {
-+ printk(KERN_EMERG "identical request makes no sense sendirq = "
-+ "%d, recvirq= %d\n", sendirq, recvirq);
-+ return NULL;
-+ }
-+
-+ while (p) {
-+ if (p->magic != DEVTREE_NODE_MAGIC) {
-+ printk(KERN_EMERG
-+ "device tree has improper node: %p\n", p);
-+ return NULL;
-+ }
-+
-+ /*
-+ * See if we can find a match on the IRQ(s) specified.
-+ */
-+ if ((sendirq == p->sendirq) && (recvirq == p->recvirq)) {
-+ return p;
-+ }
-+
-+ if ((sendirq == DEVTREE_IRQ_DONTCARE) &&
-+ (p->recvirq == recvirq)) {
-+ return p;
-+ }
-+
-+ if ((recvirq == DEVTREE_IRQ_DONTCARE) &&
-+ (p->sendirq == sendirq)) {
-+ return p;
-+ }
-+
-+ p = p->next;
-+ }
-+ return NULL;
-+}
-+EXPORT_SYMBOL(devtree_find_by_irq);
-+
-+/*
-+ * devtree_find_node()
-+ * Find a node in the device tree by name.
-+ */
-+struct devtree_node *devtree_find_node(const char *str)
-+{
-+ struct devtree_node *p = devtree;
-+ while (p) {
-+ if (p->magic != DEVTREE_NODE_MAGIC) {
-+ printk(KERN_EMERG
-+ "device tree has improper node: %p\n", p);
-+ return NULL;
-+ }
-+ if (strcmp(p->name, str) == 0) {
-+ return p;
-+ }
-+ p = p->next;
-+ }
-+ return NULL;
-+}
-+EXPORT_SYMBOL(devtree_find_node);
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/dma.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/dma.c
---- linux-2.6.30.10/arch/ubicom32/kernel/dma.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/dma.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,60 @@
-+/*
-+ * arch/ubicom32/kernel/dma.c
-+ * Ubicom32 architecture dynamic DMA mapping support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * We never have any address translations to worry about, so this
-+ * is just alloc/free.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+
-+void *dma_alloc_coherent(struct device *dev, size_t size,
-+ dma_addr_t *dma_handle, int gfp)
-+{
-+ void *ret;
-+ /* ignore region specifiers */
-+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-+
-+ if (dev == NULL || (*dev->dma_mask < 0xffffffff))
-+ gfp |= GFP_DMA;
-+ ret = (void *)__get_free_pages(gfp, get_order(size));
-+
-+ if (ret != NULL) {
-+ memset(ret, 0, size);
-+ *dma_handle = virt_to_phys(ret);
-+ }
-+ return ret;
-+}
-+
-+void dma_free_coherent(struct device *dev, size_t size,
-+ void *vaddr, dma_addr_t dma_handle)
-+{
-+ free_pages((unsigned long)vaddr, get_order(size));
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/flat.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/flat.c
---- linux-2.6.30.10/arch/ubicom32/kernel/flat.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/flat.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,206 @@
-+/*
-+ * arch/ubicom32/kernel/flat.c
-+ * Ubicom32 architecture flat executable format support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/flat.h>
-+
-+unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp,
-+ u32_t relval,
-+ u32_t flags,
-+ unsigned long *persistent)
-+{
-+ u32_t relval_reloc_type = relval >> 27;
-+ u32_t insn = *rp;
-+
-+ if (*persistent) {
-+ /*
-+ * relval holds the relocation that has to be adjusted.
-+ */
-+ if (relval == 0) {
-+ *persistent = 0;
-+ }
-+
-+ return relval;
-+ }
-+
-+ if (relval_reloc_type == R_UBICOM32_32) {
-+ /*
-+ * insn holds the relocation
-+ */
-+ return insn;
-+ }
-+
-+ /*
-+ * We don't know this one.
-+ */
-+ return 0;
-+}
-+
-+void ubicom32_flat_put_addr_at_rp(unsigned long *rp,
-+ u32_t val,
-+ u32_t relval,
-+ unsigned long *persistent)
-+{
-+ u32_t reloc_type = (relval >> 27) & 0x1f;
-+ u32_t insn = *rp;
-+
-+ /*
-+ * If persistent is set then it contains the relocation type.
-+ */
-+ if (*persistent) {
-+ /*
-+ * If persistent is set then it contains the relocation type.
-+ */
-+ reloc_type = (*persistent >> 27) & 0x1f;
-+ }
-+
-+ switch (reloc_type) {
-+ case R_UBICOM32_32:
-+ /*
-+ * Store the 32 bits as is.
-+ */
-+ *rp = val;
-+ break;
-+ case R_UBICOM32_HI24:
-+ {
-+ /*
-+ * 24 bit relocation that is part of the MOVEAI
-+ * instruction. The 24 bits come from bits 7 - 30 of the
-+ * relocation. The 24 bits eventually get split into 2
-+ * fields in the instruction encoding.
-+ *
-+ * - Bits 7 - 27 of the relocation are encoded into bits
-+ * 0 - 20 of the instruction.
-+ *
-+ * - Bits 28 - 30 of the relocation are encoded into bit
-+ * 24 - 26 of the instruction.
-+ */
-+ u32_t mask = 0x1fffff | (0x7 << 24);
-+ u32_t valid24bits = (val >> 7) & 0xffffff;
-+ u32_t bot_21 = valid24bits & 0x1fffff;
-+ u32_t upper_3_bits = ((valid24bits & 0xe00000) << 3);
-+ insn &= ~mask;
-+
-+ insn |= bot_21;
-+ insn |= upper_3_bits;
-+ *rp = insn;
-+ }
-+ break;
-+ case R_UBICOM32_LO7_S:
-+ case R_UBICOM32_LO7_2_S:
-+ case R_UBICOM32_LO7_4_S:
-+ {
-+ /*
-+ * Bits 0 - 6 of the relocation are encoded into the
-+ * 7bit unsigned immediate fields of the SOURCE-1 field
-+ * of the instruction. The immediate value is left
-+ * shifted by (0, 1, 2) based on the operand size.
-+ */
-+ u32_t mask = 0x1f | (0x3 << 8);
-+ u32_t bottom, top;
-+ val &= 0x7f;
-+ if (reloc_type == R_UBICOM32_LO7_2_S) {
-+ val >>= 1;
-+ } else if (reloc_type == R_UBICOM32_LO7_4_S) {
-+ val >>= 2;
-+ }
-+
-+ bottom = val & 0x1f;
-+ top = val >> 5;
-+ insn &= ~mask;
-+ insn |= bottom;
-+ insn |= (top << 8);
-+ BUG_ON(*rp != insn);
-+ *rp = insn;
-+ break;
-+ }
-+ case R_UBICOM32_LO7_D:
-+ case R_UBICOM32_LO7_2_D:
-+ case R_UBICOM32_LO7_4_D:
-+ {
-+ /*
-+ * Bits 0 - 6 of the relocation are encoded into the
-+ * 7bit unsigned immediate fields of the DESTINATION
-+ * field of the instruction. The immediate value is
-+ * left shifted by (0, 1, 2) based on the operand size.
-+ */
-+ u32_t mask = (0x1f | (0x3 << 8)) << 16;
-+ u32_t bottom, top;
-+ val &= 0x7f;
-+ if (reloc_type == R_UBICOM32_LO7_2_D) {
-+ val >>= 1;
-+ } else if (reloc_type == R_UBICOM32_LO7_4_D) {
-+ val >>= 2;
-+ }
-+ bottom = (val & 0x1f) << 16;
-+ top = (val >> 5) << 16;
-+ insn &= ~mask;
-+ insn |= bottom;
-+ insn |= (top << 8);
-+ BUG_ON(*rp != insn);
-+ *rp = insn;
-+ break;
-+ }
-+ case R_UBICOM32_LO7_CALLI:
-+ case R_UBICOM32_LO16_CALLI:
-+ {
-+ /*
-+ * Extract the offset for a CALLI instruction. The
-+ * offsets can be either 7 bits or 18 bits. Since all
-+ * instructions in ubicom32 architecture are at work
-+ * aligned addresses the truncated offset is right
-+ * shifted by 2 before being encoded in the instruction.
-+ */
-+ if (reloc_type == R_UBICOM32_LO7_CALLI) {
-+ val &= 0x7f;
-+ } else {
-+ val &= 0x3ffff;
-+ }
-+
-+ val >>= 2;
-+
-+ insn &= ~0x071f071f;
-+ insn |= (val & 0x1f) << 0;
-+ val >>= 5;
-+ insn |= (val & 0x07) << 8;
-+ val >>= 3;
-+ insn |= (val & 0x1f) << 16;
-+ val >>= 5;
-+ insn |= (val & 0x07) << 24;
-+ if (reloc_type == R_UBICOM32_LO7_CALLI) {
-+ BUG_ON(*rp != insn);
-+ }
-+ *rp = insn;
-+ }
-+ break;
-+ }
-+
-+ if (*persistent) {
-+ *persistent = 0;
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/head.S linux-2.6.30.10-ubi/arch/ubicom32/kernel/head.S
---- linux-2.6.30.10/arch/ubicom32/kernel/head.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/head.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,273 @@
-+/*
-+ * arch/ubicom32/kernel/head.S
-+ * <TODO: Replace with short file description>
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/sys.h>
-+#include <linux/linkage.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/page_offset.h>
-+#define __ASM__
-+#include <asm/ip5000.h>
-+
-+
-+#define SRC_AN A3
-+#define DST_AN A4
-+
-+#define PARAM_DN D0
-+#define TMP_DN D15
-+#define TMP2_DN D14
-+
-+/*
-+ * The following code is placed at the start of the Linux section of memory.
-+ * This is the primary entry point for Linux.
-+ *
-+ * However, we also want the syscall entry/exit code to be at a fixed address.
-+ * So we take the primary entry point and reserve 16 bytes. That address is
-+ * where the system_call entry point exists. This 16 bytes basically allows
-+ * us to jump around the system_call entry point code to the actual startup
-+ * code.
-+ *
-+ * Linux Memory Map (see vlinux.lds.S):
-+ * 0x40400000 - Primary Entry Point for Linux (jump around code below).
-+ * 0x40400010 - Old syscall Entry Point.
-+ */
-+
-+ .sect .skip_syscall, "ax", @progbits
-+ .global __skip_syscall_section
-+__skip_syscall_section:
-+ moveai A3, #%hi(_start)
-+ lea.1 A3, %lo(_start)(A3)
-+ ret A3
-+/*
-+ * __os_node_offset contains the offset from KERNELBASE to the os_node, it is
-+ * not intended to be used by anything except the boot code.
-+ */
-+__os_node_offset:
-+.long (_os_node - KERNELSTART)
-+
-+.text
-+.global _start
-+
-+/*
-+ * start()
-+ * This is the start of the Linux kernel.
-+ */
-+_start:
-+ move.4 SCRATCHPAD1, #0
-+
-+
-+/*
-+ * Setup the range registers... the loader has setup a few, but we will go ahead
-+ * and correct them for our own limits. Note that once set these are never
-+ * changed again. The ranges are as follows
-+ *
-+ * D_RANGE0 - io block (set up by loaded)
-+ *
-+ * I_RANGE0 and D_RANGE1 - kernel/ultra loader address space bottom of ocm-> top
-+ * of ram typically 0x3ffc0000 - 0x440000000
-+ * I_RANGE1 - kernel / userspace transition area (aka syscalls, context switches)
-+ * typically 0x3FFC0030 - ~0x3FFC0200
-+ * I_RANGE2 / D_RANGE2 - slab area
-+ * typically 0x40A00000 - ~0x44000000
-+ * I_RANGE3
-+ * old system call interface if enabled.
-+ *
-+ * D_RANGE3, D_RANGE4 - unused.
-+ */
-+ moveai SRC_AN, #%hi(PAGE_OFFSET_RAW)
-+ lea.4 SRC_AN, %lo(PAGE_OFFSET_RAW)(SRC_AN)
-+ move.4 D_RANGE1_LO, SRC_AN
-+ move.4 I_RANGE0_LO, SRC_AN
-+
-+; don't try to calculate I_RANGE_HI, see below
-+; moveai SRC_AN, #%hi(___init_end-4)
-+; lea.4 SRC_AN, %lo(___init_end-4)(SRC_AN)
-+; move.4 I_RANGE0_HI, SRC_AN
-+
-+ moveai SRC_AN, #%hi(SDRAMSTART + CONFIG_MIN_RAMSIZE-4)
-+ lea.4 SRC_AN, %lo(SDRAMSTART + CONFIG_MIN_RAMSIZE-4)(SRC_AN)
-+ move.4 D_RANGE1_HI, SRC_AN
-+
-+; for now allow the whole ram to be executable as well so we don't run into problems
-+; once we load user more code.
-+ move.4 I_RANGE0_HI, SRC_AN
-+
-+#ifdef CONFIG_PROTECT_KERNEL
-+; when kernel protection is enabled, we only open up syscall and non kernel text
-+; for userspace apps, for now only irange registers registers 1 and 2 are used for userspace.
-+
-+ ;; syscall range
-+ moveai SRC_AN, #%hi(__syscall_text_run_begin)
-+ lea.4 SRC_AN, %lo(__syscall_text_run_begin)(SRC_AN)
-+ move.4 I_RANGE1_LO, SRC_AN
-+ moveai SRC_AN, #%hi(__syscall_text_run_end)
-+ lea.4 SRC_AN, %lo(__syscall_text_run_end)(SRC_AN)
-+ move.4 I_RANGE1_HI, SRC_AN
-+
-+ ;; slab instructions
-+ moveai SRC_AN, #%hi(_edata)
-+ lea.4 SRC_AN, %lo(_edata)(SRC_AN)
-+ move.4 I_RANGE2_LO, SRC_AN
-+ ;; End of DDR is already in range0 hi so just copy it.
-+ move.4 I_RANGE2_HI, I_RANGE0_HI
-+
-+#ifdef CONFIG_OLD_40400010_SYSTEM_CALL
-+ ;; create a small hole for old syscall location
-+ moveai SRC_AN, #%hi(0x40400000)
-+ lea.4 I_RANGE3_LO, 0x10(SRC_AN)
-+ lea.4 I_RANGE3_HI, 0x14(SRC_AN)
-+#endif
-+ ;; slab data (same as slab instructions but starting a little earlier).
-+ moveai SRC_AN, #%hi(_data_protection_end)
-+ lea.4 SRC_AN, %lo(_data_protection_end)(SRC_AN)
-+ move.4 D_RANGE2_LO, SRC_AN
-+ move.4 D_RANGE2_HI, I_RANGE0_HI
-+
-+;; enable ranges
-+ ;; skip I_RANGE0_EN
-+ move.4 I_RANGE1_EN, #-1
-+ move.4 I_RANGE2_EN, #-1
-+#ifdef CONFIG_OLD_40400010_SYSTEM_CALL
-+ move.4 I_RANGE3_EN, #-1
-+#else
-+ move.4 I_RANGE3_EN, #0
-+#endif
-+ ;; skip D_RANGE0_EN or D_RANGE1_EN
-+ move.4 D_RANGE2_EN, #-1
-+ move.4 D_RANGE3_EN, #0
-+ move.4 D_RANGE4_EN, #0
-+#endif
-+
-+;
-+; If __ocm_free_begin is smaller than __ocm_free_end the
-+; setup OCM text and data ram banks properly
-+;
-+ moveai DST_AN, #%hi(__ocm_free_begin)
-+ lea.4 TMP_DN, %lo(__ocm_free_begin)(DST_AN)
-+ moveai DST_AN, #%hi(__ocm_free_end)
-+ lea.4 TMP2_DN, %lo(__ocm_free_end)(DST_AN)
-+ sub.4 #0, TMP2_DN, TMP_DN
-+ jmple.f 2f
-+ moveai DST_AN, #%hi(__data_begin)
-+ lea.4 TMP_DN, %lo(__data_begin)(DST_AN)
-+ moveai DST_AN, #%hi(OCMSTART)
-+ lea.4 TMP2_DN, %lo(OCMSTART)(DST_AN)
-+ sub.4 TMP_DN, TMP_DN, TMP2_DN
-+ lsr.4 TMP_DN, TMP_DN, #15
-+ lsl.4 TMP_DN, #1, TMP_DN
-+ moveai DST_AN, #%hi(OCMC_BASE)
-+ add.4 OCMC_BANK_MASK(DST_AN), #-1, TMP_DN
-+ pipe_flush 0
-+2:
-+;
-+; Load .ocm_text
-+;
-+ moveai DST_AN, #%hi(__ocm_text_run_end)
-+ lea.4 TMP_DN, %lo(__ocm_text_run_end)(DST_AN)
-+ moveai DST_AN, #%hi(__ocm_text_run_begin)
-+ lea.4 DST_AN, %lo(__ocm_text_run_begin)(DST_AN)
-+ moveai SRC_AN, #%hi(__ocm_text_load_begin)
-+ lea.4 SRC_AN, %lo(__ocm_text_load_begin)(SRC_AN)
-+ jmpt.t 2f
-+
-+1: move.4 (DST_AN)4++, (SRC_AN)4++
-+
-+2: sub.4 #0, DST_AN, TMP_DN
-+ jmpne.t 1b
-+;
-+; Load .syscall_text
-+;
-+ moveai DST_AN, #%hi(__syscall_text_run_end)
-+ lea.4 TMP_DN, %lo(__syscall_text_run_end)(DST_AN)
-+ moveai DST_AN, #%hi(__syscall_text_run_begin)
-+ lea.4 DST_AN, %lo(__syscall_text_run_begin)(DST_AN)
-+ moveai SRC_AN, #%hi(__syscall_text_load_begin)
-+ lea.4 SRC_AN, %lo(__syscall_text_load_begin)(SRC_AN)
-+ jmpt.t 2f
-+
-+1: move.4 (DST_AN)4++, (SRC_AN)4++
-+
-+2: sub.4 #0, DST_AN, TMP_DN
-+ jmpne.t 1b
-+
-+;
-+; Load .ocm_data
-+;
-+ moveai DST_AN, #%hi(__ocm_data_run_end)
-+ lea.4 TMP_DN, %lo(__ocm_data_run_end)(DST_AN)
-+ moveai DST_AN, #%hi(__ocm_data_run_begin)
-+ lea.4 DST_AN, %lo(__ocm_data_run_begin)(DST_AN)
-+ moveai SRC_AN, #%hi(__ocm_data_load_begin)
-+ lea.4 SRC_AN, %lo(__ocm_data_load_begin)(SRC_AN)
-+ jmpt.t 2f
-+
-+1: move.4 (DST_AN)4++, (SRC_AN)4++
-+
-+2: sub.4 #0, DST_AN, TMP_DN
-+ jmpne.t 1b
-+
-+; Clear .bss
-+;
-+ moveai SRC_AN, #%hi(_ebss)
-+ lea.4 TMP_DN, %lo(_ebss)(SRC_AN)
-+ moveai DST_AN, #%hi(_sbss)
-+ lea.4 DST_AN, %lo(_sbss)(DST_AN)
-+ jmpt.t 2f
-+
-+1: move.4 (DST_AN)4++, #0
-+
-+2: sub.4 #0, DST_AN, TMP_DN
-+ jmpne.t 1b
-+
-+; save our parameter to devtree (after clearing .bss)
-+ moveai DST_AN, #%hi(devtree)
-+ lea.4 DST_AN, %lo(devtree)(DST_AN)
-+ move.4 (DST_AN), PARAM_DN
-+
-+ moveai sp, #%hi(init_thread_union)
-+ lea.4 sp, %lo(init_thread_union)(sp)
-+ movei TMP_DN, #ASM_THREAD_SIZE
-+ add.4 sp, sp, TMP_DN
-+ move.4 -4(sp)++, #0 ; nesting level = 0
-+ move.4 -4(sp)++, #1 ; KERNEL_THREAD
-+
-+;; ip3k-elf-gdb backend now sets scratchpad3 to 1 when either continue
-+;; or single step commands are issued. scratchpad3 is set to 0 when the
-+;; debugger detaches from the board.
-+ move.4 TMP_DN, scratchpad3
-+ lsl.4 TMP_DN, TMP_DN, #0x0
-+ jmpeq.f _jump_to_start_kernel
-+_ok_to_set_break_points_in_linux:
-+;; THREAD_STALL
-+ move.4 mt_dbg_active_clr,#-1
-+;; stalling the threads isn't instantaneous.. need to flush the pipe.
-+ pipe_flush 0
-+ pipe_flush 0
-+
-+_jump_to_start_kernel:
-+ moveai SRC_AN, #%hi(start_kernel)
-+ lea.4 SRC_AN, %lo(start_kernel)(SRC_AN)
-+ ret SRC_AN
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/init_task.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/init_task.c
---- linux-2.6.30.10/arch/ubicom32/kernel/init_task.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/init_task.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * arch/ubicom32/kernel/init_task.c
-+ * Ubicom32 architecture task initialization implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/init_task.h>
-+#include <linux/fs.h>
-+#include <linux/mqueue.h>
-+#include <linux/uaccess.h>
-+#include <asm/pgtable.h>
-+
-+///static struct fs_struct init_fs = INIT_FS;
-+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-+struct mm_struct init_mm = INIT_MM(init_mm);
-+EXPORT_SYMBOL(init_mm);
-+
-+/*
-+ * Initial task structure.
-+ *
-+ * All other task structs will be allocated on slabs in fork.c
-+ */
-+struct task_struct init_task = INIT_TASK(init_task);
-+
-+EXPORT_SYMBOL(init_task);
-+
-+/*
-+ * Initial thread structure.
-+ *
-+ * We need to make sure that this is 8192-byte aligned due to the
-+ * way process stacks are handled. This is done by having a special
-+ * "init_task" linker map entry..
-+ */
-+union thread_union init_thread_union
-+ __attribute__((__section__(".data.init_task"))) =
-+ { INIT_THREAD_INFO(init_task) };
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/irq.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/irq.c
---- linux-2.6.30.10/arch/ubicom32/kernel/irq.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/irq.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,597 @@
-+/*
-+ * arch/ubicom32/kernel/irq.c
-+ * Ubicom32 architecture IRQ support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/irq.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
-+#include <asm/system.h>
-+#include <asm/traps.h>
-+#include <asm/ldsr.h>
-+#include <asm/ip5000.h>
-+#include <asm/machdep.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/thread.h>
-+#include <asm/devtree.h>
-+
-+unsigned int irq_soft_avail;
-+static struct irqaction ubicom32_reserve_action[NR_IRQS];
-+
-+#if !defined(CONFIG_DEBUG_IRQMEASURE)
-+#define IRQ_DECLARE_MEASUREMENT
-+#define IRQ_MEASUREMENT_START()
-+#define IRQ_MEASUREMENT_END(irq)
-+#else
-+#define IRQ_DECLARE_MEASUREMENT \
-+ int __diff; \
-+ unsigned int __tstart;
-+
-+#define IRQ_MEASUREMENT_START() \
-+ __tstart = UBICOM32_IO_TIMER->sysval;
-+
-+#define IRQ_MEASUREMENT_END(irq) \
-+ __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \
-+ irq_measurement_update((irq), __diff);
-+
-+/*
-+ * We keep track of the time spent in both irq_enter()
-+ * and irq_exit().
-+ */
-+#define IRQ_WEIGHT 32
-+
-+struct irq_measurement {
-+ volatile unsigned int min;
-+ volatile unsigned int avg;
-+ volatile unsigned int max;
-+};
-+
-+static DEFINE_SPINLOCK(irq_measurement_lock);
-+
-+/*
-+ * Add 1 in for softirq (irq_exit());
-+ */
-+static struct irq_measurement irq_measurements[NR_IRQS + 1];
-+
-+/*
-+ * irq_measurement_update()
-+ * Update an entry in the measurement array for this irq.
-+ */
-+static void irq_measurement_update(int irq, int sample)
-+{
-+ struct irq_measurement *im = &irq_measurements[irq];
-+ spin_lock(&irq_measurement_lock);
-+ if ((im->min == 0) || (im->min > sample)) {
-+ im->min = sample;
-+ }
-+ if (im->max < sample) {
-+ im->max = sample;
-+ }
-+ im->avg = ((im->avg * (IRQ_WEIGHT - 1)) + sample) / IRQ_WEIGHT;
-+ spin_unlock(&irq_measurement_lock);
-+}
-+#endif
-+
-+/*
-+ * irq_kernel_stack_check()
-+ * See if the kernel stack is within STACK_WARN of the end.
-+ */
-+static void irq_kernel_stack_check(int irq, struct pt_regs *regs)
-+{
-+#ifdef CONFIG_DEBUG_STACKOVERFLOW
-+ unsigned long sp;
-+
-+ /*
-+ * Make sure that we are not close to the top of the stack and thus
-+ * can not really service this interrupt.
-+ */
-+ asm volatile (
-+ "and.4 %0, SP, %1 \n\t"
-+ : "=d" (sp)
-+ : "d" (THREAD_SIZE - 1)
-+ : "cc"
-+ );
-+
-+ if (sp < (sizeof(struct thread_info) + STACK_WARN)) {
-+ printk(KERN_WARNING
-+ "cpu[%d]: possible overflow detected sp remain: %p, "
-+ "irq: %d, regs: %p\n",
-+ thread_get_self(), (void *)sp, irq, regs);
-+ dump_stack();
-+ }
-+
-+ if (sp < (sizeof(struct thread_info) + 16)) {
-+ THREAD_STALL;
-+ }
-+#endif
-+}
-+
-+/*
-+ * irq_get_lsb()
-+ * Get the LSB set in value
-+ */
-+static int irq_get_lsb(unsigned int value)
-+{
-+ static unsigned char irq_bits[8] = {
-+ 3, 0, 1, 0, 2, 0, 1, 0
-+ };
-+ u32_t nextbit = 0;
-+
-+ value = (value >> nextbit) | (value << ((sizeof(value) * 8) - nextbit));
-+
-+ /*
-+ * It's unlikely that we find that we execute the body of this while
-+ * loop. 50% of the time we won't take this at all and then of the
-+ * cases where we do about 50% of those we only execute once.
-+ */
-+ if (!(value & 0xffff)) {
-+ nextbit += 0x10;
-+ value >>= 16;
-+ }
-+
-+ if (!(value & 0xff)) {
-+ nextbit += 0x08;
-+ value >>= 8;
-+ }
-+
-+ if (!(value & 0xf)) {
-+ nextbit += 0x04;
-+ value >>= 4;
-+ }
-+
-+ nextbit += irq_bits[value & 0x7];
-+ if (nextbit > 63) {
-+ panic("nextbit out of range: %d\n", nextbit);
-+ }
-+ return nextbit;
-+}
-+
-+/*
-+ * ubicom32_reserve_handler()
-+ * Bogus handler associated with pre-reserved IRQ(s).
-+ */
-+static irqreturn_t ubicom32_reserve_handler(int irq, void *dev_id)
-+{
-+ BUG();
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * __irq_disable_vector()
-+ * Disable the interrupt by clearing the appropriate bit in the
-+ * LDSR Mask Register.
-+ */
-+static void __irq_disable_vector(unsigned int irq)
-+{
-+ ldsr_disable_vector(irq);
-+}
-+
-+/*
-+ * __irq_ack_vector()
-+ * Acknowledge the specific interrupt by clearing the associate bit in
-+ * hardware
-+ */
-+static void __irq_ack_vector(unsigned int irq)
-+{
-+ if (irq < 32) {
-+ asm volatile ("move.4 INT_CLR0, %0" : : "d" (1 << irq));
-+ } else {
-+ asm volatile ("move.4 INT_CLR1, %0" : : "d" (1 << (irq - 32)));
-+ }
-+}
-+
-+/*
-+ * __irq_enable_vector()
-+ * Clean and then enable the interrupt by setting the appropriate bit in
-+ * the LDSR Mask Register.
-+ */
-+static void __irq_enable_vector(unsigned int irq)
-+{
-+ /*
-+ * Acknowledge, really clear the vector.
-+ */
-+ __irq_ack_vector(irq);
-+ ldsr_enable_vector(irq);
-+}
-+
-+/*
-+ * __irq_mask_vector()
-+ */
-+static void __irq_mask_vector(unsigned int irq)
-+{
-+ ldsr_mask_vector(irq);
-+}
-+
-+/*
-+ * __irq_unmask_vector()
-+ */
-+static void __irq_unmask_vector(unsigned int irq)
-+{
-+ ldsr_unmask_vector(irq);
-+}
-+
-+/*
-+ * __irq_end_vector()
-+ * Called once an interrupt is completed (reset the LDSR mask).
-+ */
-+static void __irq_end_vector(unsigned int irq)
-+{
-+ ldsr_unmask_vector(irq);
-+}
-+
-+#if defined(CONFIG_SMP)
-+/*
-+ * __irq_set_affinity()
-+ * Set the cpu affinity for this interrupt.
-+ * affinity container allocated at boot
-+ */
-+static void __irq_set_affinity(unsigned int irq, const struct cpumask *dest)
-+{
-+ smp_set_affinity(irq, dest);
-+ cpumask_copy(irq_desc[irq].affinity, dest);
-+}
-+#endif
-+
-+/*
-+ * On-Chip Generic Interrupt function handling.
-+ */
-+static struct irq_chip ubicom32_irq_chip = {
-+ .name = "Ubicom32",
-+ .startup = NULL,
-+ .shutdown = NULL,
-+ .enable = __irq_enable_vector,
-+ .disable = __irq_disable_vector,
-+ .ack = __irq_ack_vector,
-+ .mask = __irq_mask_vector,
-+ .unmask = __irq_unmask_vector,
-+ .end = __irq_end_vector,
-+#if defined(CONFIG_SMP)
-+ .set_affinity = __irq_set_affinity,
-+#endif
-+};
-+
-+/*
-+ * do_IRQ()
-+ * Primary interface for handling IRQ() requests.
-+ */
-+asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
-+{
-+ struct pt_regs *oldregs;
-+ struct thread_info *ti = current_thread_info();
-+
-+ IRQ_DECLARE_MEASUREMENT;
-+
-+ /*
-+ * Mark that we are inside of an interrupt and
-+ * that interrupts are disabled.
-+ */
-+ oldregs = set_irq_regs(regs);
-+ ti->interrupt_nesting++;
-+ trace_hardirqs_off();
-+ irq_kernel_stack_check(irq, regs);
-+
-+ /*
-+ * Start the interrupt sequence
-+ */
-+ irq_enter();
-+
-+ /*
-+ * Execute the IRQ handler and any pending SoftIRQ requests.
-+ */
-+ BUG_ON(!irqs_disabled());
-+ IRQ_MEASUREMENT_START();
-+ __do_IRQ(irq);
-+ IRQ_MEASUREMENT_END(irq);
-+ BUG_ON(!irqs_disabled());
-+
-+ /*
-+ * TODO: Since IRQ's are disabled when calling irq_exit()
-+ * modify Kconfig to set __ARCH_IRQ_EXIT_IRQS_DISABLED flag.
-+ * This will slightly improve performance by enabling
-+ * softirq handling to avoid disabling/disabled interrupts.
-+ */
-+ IRQ_MEASUREMENT_START();
-+ irq_exit();
-+ IRQ_MEASUREMENT_END(NR_IRQS);
-+ BUG_ON(!irqs_disabled());
-+
-+ /*
-+ * Outside of an interrupt (or nested exit).
-+ */
-+ set_irq_regs(oldregs);
-+ trace_hardirqs_on();
-+ ti->interrupt_nesting--;
-+}
-+
-+/*
-+ * irq_soft_alloc()
-+ * Allocate a soft IRQ.
-+ */
-+int irq_soft_alloc(unsigned int *soft)
-+{
-+ if (irq_soft_avail == 0) {
-+ printk(KERN_NOTICE "no soft irqs to allocate\n");
-+ return -EFAULT;
-+ }
-+
-+ *soft = irq_get_lsb(irq_soft_avail);
-+ irq_soft_avail &= ~(1 << *soft);
-+ return 0;
-+}
-+
-+/*
-+ * ack_bad_irq()
-+ * Called to handle an bad irq request.
-+ */
-+void ack_bad_irq(unsigned int irq)
-+{
-+ printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
-+ __irq_end_vector(irq);
-+}
-+
-+/*
-+ * show_interrupts()
-+ * Return a string that displays the state of each of the interrupts.
-+ */
-+int show_interrupts(struct seq_file *p, void *v)
-+{
-+ struct irqaction *ap;
-+ int irq = *((loff_t *) v);
-+ int j;
-+
-+ if (irq >= NR_IRQS) {
-+ return 0;
-+ }
-+
-+ if (irq == 0) {
-+ seq_puts(p, " ");
-+ for_each_online_cpu(j) {
-+ seq_printf(p, "CPU%d ", j);
-+ }
-+ seq_putc(p, '\n');
-+ }
-+
-+ ap = irq_desc[irq].action;
-+ if (ap) {
-+ seq_printf(p, "%3d: ", irq);
-+ for_each_online_cpu(j) {
-+ seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
-+ }
-+ seq_printf(p, "%14s ", irq_desc[irq].chip->name);
-+ seq_printf(p, "%s", ap->name);
-+ for (ap = ap->next; ap; ap = ap->next) {
-+ seq_printf(p, ", %s", ap->name);
-+ }
-+ seq_putc(p, '\n');
-+ }
-+ return 0;
-+}
-+
-+#if defined(CONFIG_DEBUG_IRQMEASURE)
-+static unsigned int irq_cycles_to_micro(unsigned int cycles, unsigned int frequency)
-+{
-+ unsigned int micro = (cycles / (frequency / 1000000));
-+ return micro;
-+}
-+
-+/*
-+ * irq_measurement_show()
-+ * Print out the min, avg, max values for each IRQ
-+ *
-+ * By request, the max value is reset after each dump.
-+ */
-+static int irq_measurement_show(struct seq_file *p, void *v)
-+{
-+ struct irqaction *ap;
-+ unsigned int freq = processor_frequency();
-+ int irq = *((loff_t *) v);
-+
-+
-+ if (irq == 0) {
-+ seq_puts(p, "\tmin\tavg\tmax\t(micro-seconds)\n");
-+ }
-+
-+ if (irq > NR_IRQS) {
-+ return 0;
-+ }
-+
-+ if (irq == NR_IRQS) {
-+ unsigned int min, avg, max;
-+ spin_lock(&irq_measurement_lock);
-+ min = irq_cycles_to_micro(irq_measurements[irq].min, freq);
-+ avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq);
-+ max = irq_cycles_to_micro(irq_measurements[irq].max, freq);
-+ irq_measurements[irq].max = 0;
-+ spin_unlock(&irq_measurement_lock);
-+ seq_printf(p, " \t%u\t%u\t%u\tsoftirq\n", min, avg, max);
-+ return 0;
-+ }
-+
-+ ap = irq_desc[irq].action;
-+ if (ap) {
-+ unsigned int min, avg, max;
-+ spin_lock(&irq_measurement_lock);
-+ min = irq_cycles_to_micro(irq_measurements[irq].min, freq);
-+ avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq);
-+ max = irq_cycles_to_micro(irq_measurements[irq].max, freq);
-+ irq_measurements[irq].max = 0;
-+ spin_unlock(&irq_measurement_lock);
-+ seq_printf(p, "%2u:\t%u\t%u\t%u\t%s\n", irq, min, avg, max, ap->name);
-+ }
-+ return 0;
-+}
-+
-+static void *irq_measurement_start(struct seq_file *f, loff_t *pos)
-+{
-+ return (*pos <= NR_IRQS) ? pos : NULL;
-+}
-+
-+static void *irq_measurement_next(struct seq_file *f, void *v, loff_t *pos)
-+{
-+ (*pos)++;
-+ if (*pos > NR_IRQS)
-+ return NULL;
-+ return pos;
-+}
-+
-+static void irq_measurement_stop(struct seq_file *f, void *v)
-+{
-+ /* Nothing to do */
-+}
-+
-+static const struct seq_operations irq_measurement_seq_ops = {
-+ .start = irq_measurement_start,
-+ .next = irq_measurement_next,
-+ .stop = irq_measurement_stop,
-+ .show = irq_measurement_show,
-+};
-+
-+static int irq_measurement_open(struct inode *inode, struct file *filp)
-+{
-+ return seq_open(filp, &irq_measurement_seq_ops);
-+}
-+
-+static const struct file_operations irq_measurement_fops = {
-+ .open = irq_measurement_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = seq_release,
-+};
-+
-+static int __init irq_measurement_init(void)
-+{
-+ proc_create("irq_measurements", 0, NULL, &irq_measurement_fops);
-+ return 0;
-+}
-+module_init(irq_measurement_init);
-+#endif
-+
-+/*
-+ * init_IRQ(void)
-+ * Initialize the on-chip IRQ subsystem.
-+ */
-+void __init init_IRQ(void)
-+{
-+ int irq;
-+ struct devtree_node *p = NULL;
-+ struct devtree_node *iter = NULL;
-+ unsigned int mask = 0;
-+ unsigned int reserved = 0;
-+
-+ /*
-+ * Pull out the list of software interrupts that are avialable to
-+ * Linux and provide an allocation function for them. The first
-+ * 24 interrupts of INT0 are software interrupts.
-+ */
-+ irq_soft_avail = 0;
-+ if (processor_interrupts(&irq_soft_avail, NULL) < 0) {
-+ printk(KERN_WARNING "No Soft IRQ(s) available\n");
-+ }
-+ irq_soft_avail &= ((1 << 24) - 1);
-+
-+ /*
-+ * Initialize all of the on-chip interrupt handling
-+ * to use a common set of interrupt functions.
-+ */
-+ for (irq = 0; irq < NR_IRQS; irq++) {
-+ irq_desc[irq].status = IRQ_DISABLED;
-+ irq_desc[irq].action = NULL;
-+ irq_desc[irq].depth = 1;
-+ set_irq_chip(irq, &ubicom32_irq_chip);
-+ }
-+
-+ /*
-+ * The sendirq of a devnode is not registered within Linux but instead
-+ * is used by the software I/O thread. These interrupts are reserved.
-+ * The recvirq is used by Linux and registered by a device driver, these
-+ * are not reserved.
-+ *
-+ * recvirq(s) that are in the software interrupt range are not supposed
-+ * to be marked as reserved. We track this while we scan the device
-+ * nodes.
-+ */
-+ p = devtree_find_next(&iter);
-+ while (p) {
-+ unsigned char sendirq, recvirq;
-+ devtree_irq(p, &sendirq, &recvirq);
-+
-+ /*
-+ * If the sendirq is valid, mark that irq as taken by the
-+ * devtree node.
-+ */
-+ if (sendirq < NR_IRQS) {
-+ ubicom32_reserve_action[sendirq].handler =
-+ ubicom32_reserve_handler;
-+ ubicom32_reserve_action[sendirq].name = p->name;
-+ irq_desc[sendirq].action =
-+ &ubicom32_reserve_action[sendirq];
-+ mask |= (1 << sendirq);
-+ }
-+
-+ /*
-+ * Track the relevant recieve IRQ(s)
-+ */
-+ if (recvirq < 24) {
-+ mask |= (1 << recvirq);
-+ }
-+
-+ /*
-+ * Move to the next node.
-+ */
-+ p = devtree_find_next(&iter);
-+ }
-+
-+ /*
-+ * Remove these bits from the irq_soft_avail list and then use the
-+ * result as the list of pre-reserved IRQ(s).
-+ */
-+ reserved = ~irq_soft_avail & ~mask;
-+ for (irq = 0; irq < 24; irq++) {
-+ if ((reserved & (1 << irq))) {
-+ ubicom32_reserve_action[irq].handler =
-+ ubicom32_reserve_handler;
-+ ubicom32_reserve_action[irq].name = "reserved";
-+ irq_desc[irq].action = &ubicom32_reserve_action[irq];
-+ }
-+ }
-+
-+ /*
-+ * Initialize the LDSR which is the Ubicom32 programmable
-+ * interrupt controller.
-+ */
-+ ldsr_init();
-+
-+ /*
-+ * The Ubicom trap code needs a 2nd init after IRQ(s) are setup.
-+ */
-+ trap_init_interrupt();
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/ldsr.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/ldsr.c
---- linux-2.6.30.10/arch/ubicom32/kernel/ldsr.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/ldsr.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,1185 @@
-+/*
-+ * arch/ubicom32/kernel/ldsr.c
-+ * Ubicom32 architecture Linux Device Services Driver Interface
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * NOTES:
-+ *
-+ * The LDSR is a programmable interrupt controller that is written in software.
-+ * It emulates the behavior of an pic by fielding the interrupts, choosing a
-+ * victim thread to take the interrupt and forcing that thread to take a context
-+ * switch to the appropriate interrupt handler.
-+ *
-+ * Because traps are treated as just a special class of interrupts, the LDSR
-+ * also handles the processing of traps.
-+ *
-+ * Because we compile Linux both UP and SMP, we need the LDSR to use
-+ * architectural locking that is not "compiled out" when compiling UP. For now,
-+ * we use the single atomic bit lock.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/profile.h>
-+#include <linux/clocksource.h>
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <linux/cpumask.h>
-+#include <linux/bug.h>
-+#include <linux/delay.h>
-+#include <asm/ip5000.h>
-+#include <asm/atomic.h>
-+#include <asm/machdep.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/traps.h>
-+#include <asm/thread.h>
-+#include <asm/range-protect.h>
-+
-+/*
-+ * One can not print from the LDSR so the best we can do is
-+ * check a condition and stall all of the threads.
-+ */
-+
-+// #define DEBUG_LDSR 1
-+#if defined(DEBUG_LDSR)
-+#define DEBUG_ASSERT(cond) \
-+ if (!(cond)) { \
-+ THREAD_STALL; \
-+ }
-+#else
-+#define DEBUG_ASSERT(cond)
-+#endif
-+
-+/*
-+ * Make global so that we can use it in the RFI code in assembly.
-+ */
-+unsigned int ldsr_soft_irq_mask;
-+EXPORT_SYMBOL(ldsr_soft_irq_mask);
-+
-+static unsigned int ldsr_suspend_mask;
-+static unsigned int ldsr_soft_irq;
-+static unsigned int ldsr_stack_space[1024];
-+
-+static struct ldsr_register_bank {
-+ volatile unsigned int enabled0;
-+ volatile unsigned int enabled1;
-+ volatile unsigned int mask0;
-+ volatile unsigned int mask1;
-+ unsigned int total;
-+ unsigned int retry;
-+ unsigned int backout;
-+} ldsr_interrupt;
-+
-+/*
-+ * Which thread/cpu are we?
-+ */
-+static int ldsr_tid = -1;
-+
-+#if defined(CONFIG_IRQSTACKS)
-+/*
-+ * per-CPU IRQ stacks (thread information and stack)
-+ *
-+ * NOTE: Do not use DEFINE_PER_CPU() as it makes it harder
-+ * to find the location of ctx from assembly language.
-+ */
-+union irq_ctx {
-+ struct thread_info tinfo;
-+ u32 stack[THREAD_SIZE/sizeof(u32)];
-+};
-+static union irq_ctx *percpu_irq_ctxs[NR_CPUS];
-+
-+/*
-+ * Storage for the interrupt stack.
-+ */
-+#if !defined(CONFIG_IRQSTACKS_USEOCM)
-+static char percpu_irq_stacks[(NR_CPUS * THREAD_SIZE) + (THREAD_SIZE - 1)];
-+#else
-+/*
-+ * For OCM, the linker will ensure that space is allocated for the stack
-+ * see (vmlinux.lds.S)
-+ */
-+static char percpu_irq_stacks[];
-+#endif
-+
-+#endif
-+
-+/*
-+ * Save trap IRQ because we need to un-suspend if it gets set.
-+ */
-+static unsigned int ldsr_trap_irq_mask;
-+static unsigned int ldsr_trap_irq;
-+
-+/*
-+ * ret_from_interrupt_to_kernel
-+ * Just restore the context and do nothing else.
-+ */
-+asmlinkage void ret_from_interrupt_to_kernel(void)__attribute__((naked));
-+
-+/*
-+ * ret_from_interrupt_to_user
-+ * Call scheduler if needed. Just restore the context.
-+ */
-+asmlinkage void ret_from_interrupt_to_user(void)__attribute__((naked));
-+
-+#ifdef DEBUG_LDSR
-+u32_t old_sp, old_pc, old_a0, old_a5, old_a3;
-+struct pt_regs copy_regs, *copy_save_area;
-+#endif
-+
-+int __user_mode(unsigned long sp)
-+{
-+
-+ u32_t saved_stack_base = sp & ~(ASM_THREAD_SIZE - 1);
-+#if defined(CONFIG_IRQSTACKS_USEOCM)
-+ if ((union irq_ctx *)saved_stack_base == percpu_irq_ctxs[smp_processor_id()]) {
-+ /*
-+ * On the interrupt stack.
-+ */
-+ return 0;
-+ }
-+#endif
-+
-+ if (!(u32_t)current) {
-+ return 0;
-+ }
-+ return saved_stack_base != ((u32_t)current->stack);
-+}
-+
-+/*
-+ * ldsr_lock_release()
-+ * Release the LDSR lock.
-+ */
-+static void ldsr_lock_release(void)
-+{
-+ UBICOM32_UNLOCK(LDSR_LOCK_BIT);
-+}
-+
-+/*
-+ * ldsr_lock_acquire()
-+ * Acquire the LDSR lock, spin if not available.
-+ */
-+static void ldsr_lock_acquire(void)
-+{
-+ UBICOM32_LOCK(LDSR_LOCK_BIT);
-+}
-+
-+/*
-+ * ldsr_thread_irq_disable()
-+ * Disable interrupts for the specified thread.
-+ */
-+static void ldsr_thread_irq_disable(unsigned int tid)
-+{
-+ unsigned int mask = (1 << tid);
-+
-+ asm volatile (
-+ " or.4 scratchpad1, scratchpad1, %0 \n\t"
-+ :
-+ : "d"(mask)
-+ : "cc"
-+ );
-+}
-+
-+/*
-+ * ldsr_thread_get_interrupts()
-+ * Get the interrupt state for all threads.
-+ */
-+static unsigned long ldsr_thread_get_interrupts(void)
-+{
-+ unsigned long ret = 0;
-+ asm volatile (
-+ " move.4 %0, scratchpad1 \n\t"
-+ : "=r" (ret)
-+ :
-+ );
-+ return ret;
-+}
-+
-+/*
-+ * ldsr_emulate_and_run()
-+ * Emulate the instruction and then set the thread to run.
-+ */
-+static void ldsr_emulate_and_run(unsigned int tid)
-+{
-+ unsigned int thread_mask = (1 << tid);
-+ u32_t write_csr = (tid << 15) | (1 << 14);
-+
-+ /*
-+ * Emulate the unaligned access.
-+ */
-+ unaligned_emulate(tid);
-+
-+ /*
-+ * Get the thread back in a running state.
-+ */
-+ asm volatile (
-+ " setcsr %0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 trap_cause, #0 \n\t" /* Clear the trap cause
-+ * register */
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 mt_dbg_active_set, %1 \n\t" /* Activate thread even if
-+ * in dbg/fault state */
-+ " move.4 mt_active_set, %1 \n\t" /* Restart target
-+ * thread. */
-+ :
-+ : "r" (write_csr), "d" (thread_mask)
-+ : "cc"
-+ );
-+ thread_enable_mask(thread_mask);
-+}
-+
-+/*
-+ * ldsr_preemptive_context_save()
-+ * save thread context from another hardware thread. The other thread must
-+ * be stalled.
-+ */
-+static inline void ldsr_preemptive_context_save(u32_t thread,
-+ struct pt_regs *regs)
-+{
-+ /*
-+ * Save the current state of the specified thread
-+ */
-+ asm volatile (
-+ " move.4 a3, %0 \n\t"
-+
-+ /* set src1 from the target thread */
-+ " move.4 csr, %1 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+
-+ /* copy state from the other thread */
-+ " move.4 "D(PT_D0)"(a3), d0 \n\t"
-+ " move.4 "D(PT_D1)"(a3), d1 \n\t"
-+ " move.4 "D(PT_D2)"(a3), d2 \n\t"
-+ " move.4 "D(PT_D3)"(a3), d3 \n\t"
-+ " move.4 "D(PT_D4)"(a3), d4 \n\t"
-+ " move.4 "D(PT_D5)"(a3), d5 \n\t"
-+ " move.4 "D(PT_D6)"(a3), d6 \n\t"
-+ " move.4 "D(PT_D7)"(a3), d7 \n\t"
-+ " move.4 "D(PT_D8)"(a3), d8 \n\t"
-+ " move.4 "D(PT_D9)"(a3), d9 \n\t"
-+ " move.4 "D(PT_D10)"(a3), d10 \n\t"
-+ " move.4 "D(PT_D11)"(a3), d11 \n\t"
-+ " move.4 "D(PT_D12)"(a3), d12 \n\t"
-+ " move.4 "D(PT_D13)"(a3), d13 \n\t"
-+ " move.4 "D(PT_D14)"(a3), d14 \n\t"
-+ " move.4 "D(PT_D15)"(a3), d15 \n\t"
-+ " move.4 "D(PT_A0)"(a3), a0 \n\t"
-+ " move.4 "D(PT_A1)"(a3), a1 \n\t"
-+ " move.4 "D(PT_A2)"(a3), a2 \n\t"
-+ " move.4 "D(PT_A3)"(a3), a3 \n\t"
-+ " move.4 "D(PT_A4)"(a3), a4 \n\t"
-+ " move.4 "D(PT_A5)"(a3), a5 \n\t"
-+ " move.4 "D(PT_A6)"(a3), a6 \n\t"
-+ " move.4 "D(PT_SP)"(a3), a7 \n\t"
-+ " move.4 "D(PT_ACC0HI)"(a3), acc0_hi \n\t"
-+ " move.4 "D(PT_ACC0LO)"(a3), acc0_lo \n\t"
-+ " move.4 "D(PT_MAC_RC16)"(a3), mac_rc16 \n\t"
-+ " move.4 "D(PT_ACC1HI)"(a3), acc1_hi \n\t"
-+ " move.4 "D(PT_ACC1LO)"(a3), acc1_lo \n\t"
-+ " move.4 "D(PT_SOURCE3)"(a3), source3 \n\t"
-+ " move.4 "D(PT_INST_CNT)"(a3), inst_cnt \n\t"
-+ " move.4 "D(PT_CSR)"(a3), csr \n\t"
-+ " move.4 "D(PT_DUMMY_UNUSED)"(a3), #0 \n\t"
-+ " move.4 "D(PT_INT_MASK0)"(a3), int_mask0 \n\t"
-+ " move.4 "D(PT_INT_MASK1)"(a3), int_mask1 \n\t"
-+ " move.4 "D(PT_TRAP_CAUSE)"(a3), trap_cause \n\t"
-+ " move.4 "D(PT_PC)"(a3), pc \n\t"
-+ " move.4 "D(PT_PREVIOUS_PC)"(a3), previous_pc \n\t"
-+ /* disable csr thread select */
-+ " movei csr, #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ :
-+ : "r" (regs->dn), "d" ((thread << 9) | (1 << 8))
-+ : "a3"
-+ );
-+}
-+
-+/*
-+ * ldsr_rotate_threads()
-+ * Simple round robin algorithm for choosing the next cpu
-+ */
-+static int ldsr_rotate_threads(unsigned long cpus)
-+{
-+ static unsigned char ldsr_bits[8] = {
-+ 3, 0, 1, 0, 2, 0, 1, 0
-+ };
-+
-+ static int nextbit;
-+ int thisbit;
-+
-+ /*
-+ * Move the interrupts down so that we consider interrupts from where
-+ * we left off, then take the interrupts we would lose and move them
-+ * to the top half of the interrupts value.
-+ */
-+ cpus = (cpus >> nextbit) | (cpus << ((sizeof(cpus) * 8) - nextbit));
-+
-+ /*
-+ * 50% of the time we won't take this at all and then of the cases where
-+ * we do about 50% of those we only execute once.
-+ */
-+ if (!(cpus & 0xffff)) {
-+ nextbit += 16;
-+ cpus >>= 16;
-+ }
-+
-+ if (!(cpus & 0xff)) {
-+ nextbit += 8;
-+ cpus >>= 8;
-+ }
-+
-+ if (!(cpus & 0xf)) {
-+ nextbit += 4;
-+ cpus >>= 4;
-+ }
-+
-+ nextbit += ldsr_bits[cpus & 0x7];
-+ thisbit = (nextbit & ((sizeof(cpus) * 8) - 1));
-+ nextbit = (thisbit + 1) & ((sizeof(cpus) * 8) - 1);
-+ DEBUG_ASSERT(thisbit < THREAD_ARCHITECTURAL_MAX);
-+ return thisbit;
-+}
-+
-+/*
-+ * ldsr_rotate_interrupts()
-+ * Get rotating next set bit value.
-+ */
-+static int ldsr_rotate_interrupts(unsigned long long interrupts)
-+{
-+ static unsigned char ldsr_bits[8] = {
-+ 3, 0, 1, 0, 2, 0, 1, 0
-+ };
-+
-+ static int nextbit;
-+ int thisbit;
-+
-+ /*
-+ * Move the interrupts down so that we consider interrupts from where
-+ * we left off, then take the interrupts we would lose and move them
-+ * to the top half of the interrupts value.
-+ */
-+ interrupts = (interrupts >> nextbit) |
-+ (interrupts << ((sizeof(interrupts) * 8) - nextbit));
-+
-+ /*
-+ * 50% of the time we won't take this at all and then of the cases where
-+ * we do about 50% of those we only execute once.
-+ */
-+ if (!(interrupts & 0xffffffff)) {
-+ nextbit += 32;
-+ interrupts >>= 32;
-+ }
-+
-+ if (!(interrupts & 0xffff)) {
-+ nextbit += 16;
-+ interrupts >>= 16;
-+ }
-+
-+ if (!(interrupts & 0xff)) {
-+ nextbit += 8;
-+ interrupts >>= 8;
-+ }
-+
-+ if (!(interrupts & 0xf)) {
-+ nextbit += 4;
-+ interrupts >>= 4;
-+ }
-+
-+ nextbit += ldsr_bits[interrupts & 0x7];
-+ thisbit = (nextbit & ((sizeof(interrupts) * 8) - 1));
-+ nextbit = (thisbit + 1) & ((sizeof(interrupts) * 8) - 1);
-+
-+ DEBUG_ASSERT(thisbit < (sizeof(interrupts) * 8));
-+ return thisbit;
-+}
-+
-+/*
-+ * ldsr_backout_or_irq()
-+ *
-+ * One way or the other this interrupt is not being
-+ * processed, make sure that it is reset. We are
-+ * not going to call irq_end_vector() so unmask the
-+ * interrupt.
-+ */
-+static void ldsr_backout_of_irq(int vector, unsigned long tid_mask)
-+{
-+#if defined(CONFIG_SMP)
-+ if (unlikely(vector == smp_ipi_irq)) {
-+ smp_reset_ipi(tid_mask);
-+ }
-+#endif
-+ ldsr_unmask_vector(vector);
-+ ldsr_interrupt.backout++;
-+}
-+
-+#if defined(CONFIG_IRQSTACKS)
-+/*
-+ * ldsr_choose_savearea_and_returnvec()
-+ * Test our current state (user, kernel, interrupt) and set things up.
-+ *
-+ * This version of the function uses 3 stacks and nests interrupts
-+ * on the interrupt stack.
-+ */
-+static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec)
-+{
-+ struct pt_regs *save_area;
-+ u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
-+ struct thread_info * ti= (struct thread_info *)sw_ksp[tid];
-+
-+#if defined(CONFIG_SMP)
-+ union irq_ctx *icp = percpu_irq_ctxs[tid];
-+#else
-+ union irq_ctx *icp = percpu_irq_ctxs[0];
-+#endif
-+
-+ if (masked_linux_sp == (u32_t)icp) {
-+ /*
-+ * Fault/Interrupt occurred while on the interrupt stack.
-+ */
-+ save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8);
-+ *pvec = (u32_t)(&ret_from_interrupt_to_kernel);
-+ } else {
-+ /*
-+ * Fault/Interrupt occurred while on user/kernel stack. This is a new
-+ * first use of the interrupt stack.
-+ */
-+ save_area = (struct pt_regs *) ((char *)icp + sizeof(icp->stack) - sizeof(struct pt_regs) - 8);
-+ if (masked_linux_sp == (u32_t)ti) {
-+ *pvec = (u32_t)(&ret_from_interrupt_to_kernel);
-+ } else {
-+ *pvec = (u32_t)(&ret_from_interrupt_to_user);
-+ }
-+
-+ /*
-+ * Because the softirq code will execute on the "interrupt" stack, we
-+ * need to maintain the knowledge of what "task" was executing on the
-+ * cpu. This is done by copying the thread_info->task from the cpu
-+ * we are about to context switch into the interrupt contexts thread_info
-+ * structure.
-+ */
-+ icp->tinfo.task = ti->task;
-+ icp->tinfo.preempt_count =
-+ (icp->tinfo.preempt_count & ~SOFTIRQ_MASK) |
-+ (ti->preempt_count & SOFTIRQ_MASK);
-+ icp->tinfo.interrupt_nesting = 0;
-+ }
-+ save_area->nesting_level = icp->tinfo.interrupt_nesting;
-+ return save_area;
-+}
-+
-+#else
-+/*
-+ * ldsr_choose_savearea_and_returnvec()
-+ * Test our current state (user, kernel, interrupt) and set things up.
-+ *
-+ * The version of the function uses just the user & kernel stack and
-+ * nests interrupts on the existing kernel stack.
-+ */
-+static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec)
-+{
-+ struct pt_regs *save_area;
-+ u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
-+ struct thread_info *ti = (struct thread_info *)sw_ksp[tid];
-+
-+ if (masked_linux_sp == (u32_t)ti) {
-+ /*
-+ * Fault/Interrupt occurred while on the kernel stack.
-+ */
-+ save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8);
-+ *pvec = (u32_t) (&ret_from_interrupt_to_kernel);
-+ } else {
-+ /*
-+ * Fault/Interrupt occurred while on user stack.
-+ */
-+ ti->interrupt_nesting = 0;
-+ save_area = (struct pt_regs *)((u32_t)ti + THREAD_SIZE - sizeof(struct pt_regs) - 8);
-+ *pvec = (u32_t) (&ret_from_interrupt_to_user);
-+ }
-+ save_area->nesting_level = ti->interrupt_nesting;
-+ return save_area;
-+}
-+#endif
-+
-+/*
-+ * ldsr_ctxsw_thread()
-+ * Context switch a mainline thread to execute do_IRQ() for the specified
-+ * vector.
-+ */
-+static void ldsr_ctxsw_thread(int vector, thread_t tid)
-+{
-+ u32_t linux_sp;
-+ u32_t return_vector;
-+ struct pt_regs *save_area, *regs;
-+ u32_t thread_mask = (1 << tid);
-+ u32_t read_csr = ((tid << 9) | (1 << 8));
-+ u32_t write_csr = (tid << 15) | (1 << 14);
-+ u32_t interrupt_vector = (u32_t)(&do_IRQ);
-+
-+ unsigned int frame_type = UBICOM32_FRAME_TYPE_INTERRUPT;
-+
-+
-+ DEBUG_ASSERT(!thread_is_enabled(tid));
-+
-+ /*
-+ * Acquire the necessary global and per thread locks for tid.
-+ * As a side effect, we ensure that the thread has not trapped
-+ * and return true if it has.
-+ */
-+ if (unlikely(thread_is_trapped(tid))) {
-+ /*
-+ * Read the trap cause, the sp and clear the MT_TRAP bits.
-+ */
-+ unsigned int cause;
-+ asm volatile (
-+ " setcsr %3 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 %0, TRAP_CAUSE \n\t"
-+ " move.4 %1, SP \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 MT_BREAK_CLR, %2\n\t"
-+ " move.4 MT_TRAP_CLR, %2 \n\t"
-+ : "=&r" (cause), "=&r" (linux_sp)
-+ : "r" (thread_mask), "m" (read_csr)
-+ );
-+
-+ ldsr_backout_of_irq(vector, (1 << tid));
-+
-+#if !defined(CONFIG_UNALIGNED_ACCESS_DISABLED)
-+ /*
-+ * See if the unaligned trap handler can deal with this.
-+ * If so, emulate the instruction and then just restart
-+ * the thread.
-+ */
-+ if (unaligned_only(cause)) {
-+#if defined(CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY)
-+ /*
-+ * Check if this is a kernel stack if so we will not
-+ * handle the trap
-+ */
-+ u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
-+ if ((masked_linux_sp != (u32_t)sw_ksp[tid]) &&
-+ unaligned_only(cause)) {
-+ ldsr_emulate_and_run(tid);
-+ return;
-+ }
-+#else
-+ ldsr_emulate_and_run(tid);
-+ return;
-+#endif
-+
-+ }
-+#endif
-+
-+ interrupt_vector = (u32_t)(&trap_handler);
-+ frame_type = UBICOM32_FRAME_TYPE_TRAP;
-+ } else {
-+ /*
-+ * Read the target thread's SP
-+ */
-+ asm volatile (
-+ " setcsr %1 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 %0, SP \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ : "=m" (linux_sp)
-+ : "m" (read_csr)
-+ );
-+ }
-+
-+ /*
-+ * We are delivering an interrupt, count it.
-+ */
-+ ldsr_interrupt.total++;
-+
-+ /*
-+ * At this point, we will definitely force this thread to
-+ * a new context, show its interrupts as disabled.
-+ */
-+ ldsr_thread_irq_disable(tid);
-+
-+ /*
-+ * Test our current state (user, kernel, interrupt). Save the
-+ * appropriate data and setup for the return.
-+ */
-+ save_area = ldsr_choose_savearea_and_returnvec(tid, linux_sp, &return_vector);
-+
-+ /*
-+ * The pt_regs (save_area) contains the type of thread that we are dealing
-+ * with (KERNEL/NORMAL) and is copied into each pt_regs area. We get this
-+ * from the current tasks kernel pt_regs area that always exists at the
-+ * top of the kernel stack.
-+ */
-+ regs = (struct pt_regs *)((u32_t)sw_ksp[tid] + THREAD_SIZE - sizeof(struct pt_regs) - 8);
-+ save_area->thread_type = regs->thread_type;
-+
-+ /*
-+ * Preserve the context of the Linux thread.
-+ */
-+ ldsr_preemptive_context_save(tid, save_area);
-+
-+ /*
-+ * Load the fram_type into the save_area.
-+ */
-+ save_area->frame_type = frame_type;
-+
-+#ifdef CONFIG_STOP_ON_TRAP
-+ /*
-+ * Before we get backtrace and showing stacks working well, it sometimes
-+ * helps to enter the debugger when a trap occurs before we change the
-+ * thread to handle the fault. This optional code causes all threads to
-+ * stop on every trap frame. One assumes that GDB connected via the
-+ * mailbox interface will be used to recover from this state.
-+ */
-+ if (frame_type == UBICOM32_FRAME_TYPE_TRAP) {
-+ THREAD_STALL;
-+ }
-+#endif
-+
-+#ifdef DEBUG_LDSR
-+ copy_regs = *save_area;
-+ copy_save_area = save_area;
-+
-+ old_a0 = save_area->an[0];
-+ old_a3 = save_area->an[3];
-+ old_sp = save_area->an[7];
-+ old_a5 = save_area->an[5];
-+ old_pc = save_area->pc;
-+#endif
-+
-+ /*
-+ * Now we have to switch the kernel thread to run do_IRQ function.
-+ * Set pc to do_IRQ
-+ * Set d0 to vector
-+ * Set d1 to save_area.
-+ * Set a5 to the proper return vector.
-+ */
-+ asm volatile (
-+ " setcsr %0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 d0, %5 \n\t" /* d0 = 0 vector # */
-+ " move.4 d1, %1 \n\t" /* d1 = save_area */
-+ " move.4 sp, %1 \n\t" /* sp = save_area */
-+ " move.4 a5, %2 \n\t" /* a5 = return_vector */
-+ " move.4 pc, %3 \n\t" /* pc = do_IRQ routine. */
-+ " move.4 trap_cause, #0 \n\t" /* Clear the trap cause
-+ * register */
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " enable_kernel_ranges %4 \n\t"
-+ " move.4 mt_dbg_active_set, %4 \n\t" /* Activate thread even if
-+ * in dbg/fault state */
-+ " move.4 mt_active_set, %4 \n\t" /* Restart target
-+ * thread. */
-+ :
-+ : "r" (write_csr), "r" (save_area),
-+ "r" (return_vector), "r" (interrupt_vector),
-+ "d" (thread_mask), "r" (vector)
-+ : "cc"
-+ );
-+ thread_enable_mask(thread_mask);
-+}
-+
-+/*
-+ * ldsr_deliver_interrupt()
-+ * Deliver the interrupt to one of the threads or all of the threads.
-+ */
-+static void ldsr_deliver_interrupt(int vector,
-+ unsigned long deliver_to,
-+ int all)
-+{
-+ unsigned long disabled_threads;
-+ unsigned long possible_threads;
-+ unsigned long trapped_threads;
-+ unsigned long global_locks;
-+
-+ /*
-+ * Disable all of the threads that we might want to send
-+ * this interrupt to.
-+ */
-+retry:
-+ DEBUG_ASSERT(deliver_to);
-+ thread_disable_mask(deliver_to);
-+
-+ /*
-+ * If any threads are in the trap state, we have to service the
-+ * trap for those threads first.
-+ */
-+ asm volatile (
-+ "move.4 %0, MT_TRAP \n\t"
-+ : "=r" (trapped_threads)
-+ :
-+ );
-+
-+ trapped_threads &= deliver_to;
-+ if (unlikely(trapped_threads)) {
-+ /*
-+ * all traps will be handled, so clear the trap bit before restarting any threads
-+ */
-+ ubicom32_clear_interrupt(ldsr_trap_irq);
-+
-+ /*
-+ * Let the remaining untrapped threads, continue.
-+ */
-+ deliver_to &= ~trapped_threads;
-+ if (deliver_to) {
-+ thread_enable_mask(deliver_to);
-+ }
-+
-+ /*
-+ * For the trapped threads force them to handle
-+ * a trap.
-+ */
-+ while (trapped_threads) {
-+ unsigned long which = ffz(~trapped_threads);
-+ trapped_threads &= ~(1 << which);
-+ ldsr_ctxsw_thread(vector, which);
-+ }
-+ return;
-+ }
-+
-+ /*
-+ * Can we deliver an interrupt to any of the threads?
-+ */
-+ disabled_threads = ldsr_thread_get_interrupts();
-+ possible_threads = deliver_to & ~disabled_threads;
-+ if (unlikely(!possible_threads)) {
-+#if defined(CONFIG_SMP)
-+ /*
-+ * In the SMP case, we can not wait because 1 cpu might be
-+ * sending an IPI to another cpu which is currently blocked.
-+ * The only way to ensure IPI delivery is to backout and
-+ * keep trying. For SMP, we don't sleep until the interrupts
-+ * are delivered.
-+ */
-+ thread_enable_mask(deliver_to);
-+ ldsr_backout_of_irq(vector, deliver_to);
-+ return;
-+#else
-+ /*
-+ * In the UP case, we have nothing to do so we should wait.
-+ *
-+ * Since the INT_MASK0 and INT_MASK1 are "re-loaded" before we
-+ * suspend in the outer loop, we do not need to save them here.
-+ *
-+ * We test that we were awakened for our specific interrupts
-+ * because the ldsr mask/unmask operations will force the ldsr
-+ * awake even if the interrupt on the mainline thread is not
-+ * completed.
-+ */
-+ unsigned int scratch = 0;
-+ thread_enable_mask(deliver_to);
-+ asm volatile (
-+ " move.4 INT_MASK0, %1 \n\t"
-+ " move.4 INT_MASK1, #0 \n\t"
-+
-+ "1: suspend \n\t"
-+ " move.4 %0, INT_STAT0 \n\t"
-+ " and.4 %0, %0, %1 \n\t"
-+ " jmpeq.f 1b \n\t"
-+
-+ " move.4 INT_CLR0, %2 \n\t"
-+ : "+r" (scratch)
-+ : "d" (ldsr_suspend_mask), "r" (ldsr_soft_irq_mask)
-+ : "cc"
-+ );
-+
-+ /*
-+ * This delay is sized to coincide with the time it takes a
-+ * thread to complete the exit (see return_from_interrupt).
-+ */
-+ ldsr_interrupt.retry++;
-+ __delay(10);
-+ goto retry;
-+#endif
-+ }
-+
-+ /*
-+ * If any of the global locks are held, we can not deliver any
-+ * interrupts, we spin delay(10) and then try again. If our
-+ * spinning becomes a bottle neck, we will need to suspend but for
-+ * now lets just spin.
-+ */
-+ asm volatile (
-+ "move.4 %0, scratchpad1 \n\t"
-+ : "=r" (global_locks)
-+ :
-+ );
-+ if (unlikely(global_locks & 0xffff0000)) {
-+ thread_enable_mask(deliver_to);
-+
-+ /*
-+ * This delay is sized to coincide with the average time it
-+ * takes a thread to release a global lock.
-+ */
-+ ldsr_interrupt.retry++;
-+ __delay(10);
-+ goto retry;
-+ }
-+
-+ /*
-+ * Deliver to one cpu.
-+ */
-+ if (!all) {
-+ /*
-+ * Find our victim and then enable everyone else.
-+ */
-+ unsigned long victim = ldsr_rotate_threads(possible_threads);
-+ DEBUG_ASSERT((deliver_to & (1 << victim)));
-+ DEBUG_ASSERT((possible_threads & (1 << victim)));
-+
-+ deliver_to &= ~(1 << victim);
-+ if (deliver_to) {
-+ thread_enable_mask(deliver_to);
-+ }
-+ ldsr_ctxsw_thread(vector, victim);
-+ return;
-+ }
-+
-+ /*
-+ * If we can't deliver to some threads, wake them
-+ * back up and reset things to deliver to them.
-+ */
-+ deliver_to &= ~possible_threads;
-+ if (unlikely(deliver_to)) {
-+ thread_enable_mask(deliver_to);
-+ ldsr_backout_of_irq(vector, deliver_to);
-+ }
-+
-+ /*
-+ * Deliver to all possible threads(s).
-+ */
-+ while (possible_threads) {
-+ unsigned long victim = ffz(~possible_threads);
-+ possible_threads &= ~(1 << victim);
-+ ldsr_ctxsw_thread(vector, victim);
-+ }
-+}
-+
-+/*
-+ * ldsr_thread()
-+ * This thread acts as the interrupt controller for Linux.
-+ */
-+static void ldsr_thread(void *arg)
-+{
-+ int stat0;
-+ int stat1;
-+ int interrupt0;
-+ int interrupt1;
-+ long long interrupts;
-+ unsigned long cpus;
-+
-+#if !defined(CONFIG_SMP)
-+ /*
-+ * In a non-smp configuration, we can not use the cpu(s) arrays because
-+ * there is not a 1-1 correspondence between cpus(s) and our threads.
-+ * Thus we must get a local idea of the mainline threads and use the
-+ * one and only 1 set as the victim. We do this once before the ldsr
-+ * loop.
-+ *
-+ * In the SMP case, we will use the cpu(s) map to determine which cpu(s)
-+ * are valid to send interrupts to.
-+ */
-+ int victim = 0;
-+ unsigned int mainline = thread_get_mainline();
-+ if (mainline == 0) {
-+ panic("no mainline Linux threads to interrupt");
-+ return;
-+ }
-+ victim = ffz(~mainline);
-+ cpus = (1 << victim);
-+#endif
-+
-+ while (1) {
-+ /*
-+ * If one changes this code not to reload the INT_MASK(s), you
-+ * need to know that code in the lock waiting above does not
-+ * reset the MASK registers back; so that code will need to be
-+ * changed.
-+ */
-+ ldsr_lock_acquire();
-+ asm volatile (
-+ " move.4 INT_MASK0, %0 \n\t"
-+ " move.4 INT_MASK1, %1 \n\t"
-+ :
-+ : "U4" (ldsr_interrupt.mask0), "U4" (ldsr_interrupt.mask1)
-+ );
-+ ldsr_lock_release();
-+ thread_suspend();
-+
-+ /*
-+ * Read the interrupt status registers
-+ */
-+ asm volatile (
-+ "move.4 %0, INT_STAT0 \n\t"
-+ "move.4 %1, INT_STAT1 \n\t"
-+ : "=r" (stat0), "=r" (stat1)
-+ :
-+ );
-+
-+ /*
-+ * We only care about interrupts that we have been told to care
-+ * about. The interrupt must be enabled, unmasked, and have
-+ * occurred in the hardware.
-+ */
-+ ldsr_lock_acquire();
-+ interrupt0 = ldsr_interrupt.enabled0 &
-+ ldsr_interrupt.mask0 & stat0;
-+ interrupt1 = ldsr_interrupt.enabled1 &
-+ ldsr_interrupt.mask1 & stat1;
-+ ldsr_lock_release();
-+
-+ /*
-+ * For each interrupt in the "snapshot" we will mask the
-+ * interrupt handle the interrupt (typically calling do_IRQ()).
-+ *
-+ * The interrupt is unmasked by desc->chip->end() function in
-+ * the per chip generic interrupt handling code
-+ * (arch/ubicom32/kernel/irq.c).8
-+ */
-+ interrupts = ((unsigned long long)interrupt1 << 32) |
-+ interrupt0;
-+ while (interrupts) {
-+ int all = 0;
-+ int vector = ldsr_rotate_interrupts(interrupts);
-+ interrupts &= ~((unsigned long long)1 << vector);
-+
-+ /*
-+ * Now mask off this vector so that the LDSR ignores
-+ * it until it is acknowledged.
-+ */
-+ ldsr_mask_vector(vector);
-+#if !defined(CONFIG_SMP)
-+ ldsr_deliver_interrupt(vector, cpus, all);
-+#else
-+ cpus = smp_get_affinity(vector, &all);
-+ if (!cpus) {
-+ /*
-+ * No CPU to deliver to so just leave
-+ * the interrupt unmasked and increase
-+ * the backout count. We will eventually
-+ * return and deliver it again.
-+ */
-+ ldsr_unmask_vector(vector);
-+ ldsr_interrupt.backout++;
-+ continue;
-+ }
-+ ldsr_deliver_interrupt(vector, cpus, all);
-+#endif
-+ }
-+ }
-+
-+ /* NOTREACHED */
-+}
-+
-+/*
-+ * ldsr_mask_vector()
-+ * Temporarily mask the interrupt vector, turn off the bit in the mask
-+ * register.
-+ */
-+void ldsr_mask_vector(unsigned int vector)
-+{
-+ unsigned int mask;
-+ if (vector < 32) {
-+ mask = ~(1 << vector);
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.mask0 &= mask;
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+ return;
-+ }
-+
-+ mask = ~(1 << (vector - 32));
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.mask1 &= mask;
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+}
-+
-+/*
-+ * ldsr_unmask_vector()
-+ * Unmask the interrupt vector so that it can be used, turn on the bit in
-+ * the mask register.
-+ *
-+ * Because it is legal for the interrupt path to disable an interrupt,
-+ * the unmasking code must ensure that disabled interrupts are not
-+ * unmasked.
-+ */
-+void ldsr_unmask_vector(unsigned int vector)
-+{
-+ unsigned int mask;
-+ if (vector < 32) {
-+ mask = (1 << vector);
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.mask0 |= (mask & ldsr_interrupt.enabled0);
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+ return;
-+ }
-+
-+ mask = (1 << (vector - 32));
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.mask1 |= (mask & ldsr_interrupt.enabled1);
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+}
-+
-+/*
-+ * ldsr_enable_vector()
-+ * The LDSR implements an interrupt controller and has a local (to the
-+ * LDSR) copy of its interrupt mask.
-+ */
-+void ldsr_enable_vector(unsigned int vector)
-+{
-+ unsigned int mask;
-+ if (vector < 32) {
-+ mask = (1 << vector);
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.enabled0 |= mask;
-+ ldsr_interrupt.mask0 |= mask;
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+ return;
-+ }
-+
-+ mask = (1 << (vector - 32));
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.enabled1 |= mask;
-+ ldsr_interrupt.mask1 |= mask;
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+}
-+
-+/*
-+ * ldsr_disable_vector()
-+ * The LDSR implements an interrupt controller and has a local (to the
-+ * LDSR) copy of its interrupt mask.
-+ */
-+void ldsr_disable_vector(unsigned int vector)
-+{
-+ unsigned int mask;
-+
-+ if (vector < 32) {
-+ mask = ~(1 << vector);
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.enabled0 &= mask;
-+ ldsr_interrupt.mask0 &= mask;
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+ return;
-+ }
-+
-+ mask = ~(1 << (vector - 32));
-+ ldsr_lock_acquire();
-+ ldsr_interrupt.enabled1 &= mask;
-+ ldsr_interrupt.mask1 &= mask;
-+ ldsr_lock_release();
-+ thread_resume(ldsr_tid);
-+}
-+
-+/*
-+ * ldsr_get_threadid()
-+ * Return the threadid of the LDSR thread.
-+ */
-+thread_t ldsr_get_threadid(void)
-+{
-+ return ldsr_tid;
-+}
-+
-+/*
-+ * ldsr_set_trap_irq()
-+ * Save away the trap Soft IRQ
-+ *
-+ * See the per thread lock suspend code above for an explination.
-+ */
-+void ldsr_set_trap_irq(unsigned int irq)
-+{
-+ ldsr_trap_irq = irq;
-+ ldsr_trap_irq_mask = (1 << irq);
-+ ldsr_suspend_mask |= ldsr_trap_irq_mask;
-+}
-+
-+/*
-+ * ldsr_init()
-+ * Initialize the LDSR (Interrupt Controller)
-+ */
-+void ldsr_init(void)
-+{
-+#if defined(CONFIG_IRQSTACKS)
-+ int i;
-+ union irq_ctx *icp;
-+#endif
-+
-+ void *stack_high = (void *)ldsr_stack_space;
-+ stack_high += sizeof(ldsr_stack_space);
-+ stack_high -= 8;
-+
-+
-+ /*
-+ * Obtain a soft IRQ to use
-+ */
-+ if (irq_soft_alloc(&ldsr_soft_irq) < 0) {
-+ panic("no software IRQ is available\n");
-+ return;
-+ }
-+ ldsr_soft_irq_mask |= (1 << ldsr_soft_irq);
-+ ldsr_suspend_mask |= ldsr_soft_irq_mask;
-+
-+ /*
-+ * Now allocate and start the LDSR thread.
-+ */
-+ ldsr_tid = thread_alloc();
-+ if (ldsr_tid < 0) {
-+ panic("no thread available to run LDSR");
-+ return;
-+ }
-+
-+#if defined(CONFIG_IRQSTACKS)
-+ /*
-+ * Initialize the per-cpu irq thread_info structure that
-+ * is at the top of each per-cpu irq stack.
-+ */
-+ icp = (union irq_ctx *)
-+ (((unsigned long)percpu_irq_stacks + (THREAD_SIZE - 1)) & ~(THREAD_SIZE - 1));
-+ for (i = 0; i < NR_CPUS; i++) {
-+ struct thread_info *ti = &(icp->tinfo);
-+ ti->task = NULL;
-+ ti->exec_domain = NULL;
-+ ti->cpu = i;
-+ ti->preempt_count = 0;
-+ ti->interrupt_nesting = 0;
-+ percpu_irq_ctxs[i] = icp++;
-+ }
-+#endif
-+ thread_start(ldsr_tid, ldsr_thread, NULL,
-+ stack_high, THREAD_TYPE_NORMAL);
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/Makefile linux-2.6.30.10-ubi/arch/ubicom32/kernel/Makefile
---- linux-2.6.30.10/arch/ubicom32/kernel/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,64 @@
-+#
-+# arch/ubicom32/kernel/Makefile
-+# Main Makefile for the Ubicom32 arch directory.
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+extra-y := head.o vmlinux.lds
-+
-+obj-y += \
-+ devtree.o \
-+ dma.o \
-+ flat.o \
-+ init_task.o \
-+ irq.o \
-+ ldsr.o \
-+ os_node.o \
-+ process.o \
-+ processor.o \
-+ ptrace.o \
-+ setup.o \
-+ signal.o \
-+ stacktrace.o \
-+ sys_ubicom32.o \
-+ syscalltable.o \
-+ thread.o \
-+ time.o \
-+ traps.o \
-+ ubicom32_context_switch.o \
-+ ubicom32_ksyms.o \
-+ ubicom32_syscall.o \
-+ unaligned_trap.o
-+
-+obj-$(CONFIG_MODULES) += module.o
-+obj-$(CONFIG_COMEMPCI) += comempci.o
-+obj-$(CONFIG_SMP) += smp.o topology.o
-+obj-$(CONFIG_ACCESS_OK_CHECKS_ENABLED) += uaccess.o
-+obj-$(CONFIG_GENERIC_CLOCKEVENTS) += timer_device.o
-+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer_broadcast.o
-+
-+ifndef CONFIG_GENERIC_CLOCKEVENTS
-+obj-y += timer_tick.o
-+endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/module.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/module.c
---- linux-2.6.30.10/arch/ubicom32/kernel/module.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/module.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,463 @@
-+/*
-+ * arch/ubicom32/kernel/module.c
-+ * Ubicom32 architecture loadable module support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/moduleloader.h>
-+#include <linux/bug.h>
-+#include <linux/elf.h>
-+#include <linux/vmalloc.h>
-+#include <linux/fs.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <asm/ocm-alloc.h>
-+
-+#if 0
-+#define DEBUGP printk
-+#else
-+#define DEBUGP(fmt...)
-+#endif
-+
-+static void _module_free_ocm(struct module *mod)
-+{
-+ printk(KERN_INFO "module arch cleanup %s: OCM instruction memory free "
-+ " of %d @%p\n", mod->name, mod->arch.ocm_inst_size,
-+ mod->arch.ocm_inst);
-+
-+ if (mod->arch.ocm_inst) {
-+ ocm_inst_free(mod->arch.ocm_inst);
-+ mod->arch.ocm_inst = 0;
-+ mod->arch.ocm_inst_size = 0;
-+ }
-+}
-+
-+void *module_alloc(unsigned long size)
-+{
-+ if (size == 0)
-+ return NULL;
-+ return vmalloc(size);
-+}
-+
-+
-+/* Free memory returned from module_alloc */
-+void module_free(struct module *mod, void *module_region)
-+{
-+ vfree(module_region);
-+ /* FIXME: If module_region == mod->init_region, trim exception
-+ table entries. */
-+
-+ /*
-+ * This is expected to be final module free, use this to prune the
-+ * ocm
-+ */
-+ if (module_region && module_region == mod->module_core)
-+ _module_free_ocm(mod);
-+
-+}
-+
-+/*
-+ * module_frob_arch_sections()
-+ * Called from kernel/module.c allowing arch specific handling of
-+ * sections/headers.
-+ */
-+int module_frob_arch_sections(Elf_Ehdr *hdr,
-+ Elf_Shdr *sechdrs,
-+ char *secstrings,
-+ struct module *mod)
-+{
-+ Elf_Shdr *s, *sechdrs_end;
-+ void *ocm_inst = NULL;
-+ int ocm_inst_size = 0;
-+
-+ /*
-+ * Ubicom32 v3 and v4 are almost binary compatible but not completely.
-+ * To be safe check that the module was compiled with the correct -march
-+ * which is flags.
-+ */
-+#ifdef CONFIG_UBICOM32_V4
-+ if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V4) {
-+ printk(KERN_WARNING "Module %s was not compiled for "
-+ "ubicom32v4, elf_flags:%x,\n",
-+ mod->name, hdr->e_flags);
-+ return -ENOEXEC;
-+ }
-+#elif defined CONFIG_UBICOM32_V3
-+ if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V3) {
-+ printk(KERN_WARNING "Module %s was not compiled for "
-+ "ubicom32v3, elf_flags:%x\n",
-+ mod->name, hdr->e_flags);
-+ return -ENOEXEC;
-+ }
-+#else
-+#error Unknown/Unsupported ubicom32 architecture.
-+#endif
-+
-+ /*
-+ * XXX: sechdrs are vmalloced in kernel/module.c
-+ * and would be vfreed just after module is loaded,
-+ * so we hack to keep the only information we needed
-+ * in mod->arch to correctly free L1 I/D sram later.
-+ * NOTE: this breaks the semantic of mod->arch structure.
-+ */
-+ sechdrs_end = sechdrs + hdr->e_shnum;
-+ for (s = sechdrs; s < sechdrs_end; ++s) {
-+ if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0)
-+ ocm_inst_size += s->sh_size;
-+ }
-+
-+ if (!ocm_inst_size)
-+ return 0;
-+
-+ ocm_inst = ocm_inst_alloc(ocm_inst_size, 0 /* internal */);
-+ if (ocm_inst == NULL) {
-+#ifdef CONFIG_OCM_MODULES_FALLBACK_TO_DDR
-+ printk(KERN_WARNING
-+ "module %s: OCM instruction memory allocation of %d"
-+ "failed, fallback to DDR\n", mod->name, ocm_inst_size);
-+ return 0;
-+#else
-+ printk(KERN_ERR
-+ "module %s: OCM instruction memory allocation of %d"
-+ "failed.\n", mod->name, ocm_inst_size);
-+ return -ENOMEM;
-+#endif
-+ }
-+
-+ mod->arch.ocm_inst = ocm_inst;
-+ mod->arch.ocm_inst_size = ocm_inst_size;
-+
-+ printk(KERN_INFO
-+ "module %s: OCM instruction memory allocation of %d @%p\n",
-+ mod->name, mod->arch.ocm_inst_size, mod->arch.ocm_inst);
-+
-+ for (s = sechdrs; s < sechdrs_end; ++s) {
-+ if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0) {
-+ memcpy(ocm_inst, (void *)s->sh_addr, s->sh_size);
-+ s->sh_flags &= ~SHF_ALLOC;
-+ s->sh_addr = (unsigned long)ocm_inst;
-+ ocm_inst += s->sh_size;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+int apply_relocate(Elf32_Shdr *sechdrs,
-+ const char *strtab,
-+ unsigned int symindex,
-+ unsigned int relsec,
-+ struct module *me)
-+{
-+ DEBUGP("Invalid Applying relocate section %u to %u\n", relsec,
-+ sechdrs[relsec].sh_info);
-+ return -EINVAL;
-+}
-+
-+int apply_relocate_add(Elf32_Shdr *sechdrs,
-+ const char *strtab,
-+ unsigned int symindex,
-+ unsigned int relsec,
-+ struct module *me)
-+{
-+ unsigned int i;
-+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
-+ Elf32_Sym *sym;
-+ uint32_t *location;
-+ uint32_t insn;
-+
-+ DEBUGP("Applying relocate_add section %u to %u\n", relsec,
-+ sechdrs[relsec].sh_info);
-+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-+ uint32_t v;
-+ const int elf32_rtype = ELF32_R_TYPE(rel[i].r_info);
-+
-+ /* This is where to make the change */
-+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-+ + rel[i].r_offset;
-+ /* This is the symbol it is referring to. Note that all
-+ undefined symbols have been resolved. */
-+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-+ + ELF32_R_SYM(rel[i].r_info);
-+
-+ v = rel[i].r_addend + sym->st_value;
-+
-+
-+ switch (elf32_rtype) {
-+ case R_UBICOM32_32:
-+ {
-+ /*
-+ * Store the 32 bit relocation as is.
-+ */
-+ *location = v;
-+ break;
-+ }
-+ case R_UBICOM32_HI24:
-+ {
-+ /*
-+ * 24 bit relocation that is part of the MOVEAI
-+ * instruction. The 24 bits come from bits 7 - 30 of the
-+ * relocation. Theses bits eventually get split into 2
-+ * fields in the instruction encoding.
-+ *
-+ * - Bits 7 - 27 of the relocation are encoded into bits
-+ * 0 - 20 of the instruction.
-+ *
-+ * - Bits 28 - 30 of the relocation are encoded into
-+ * bit 24 - 26 of the instruction.
-+ */
-+ uint32_t valid24 = (v >> 7) & 0xffffff;
-+ insn = *location;
-+
-+ insn &= ~(0x1fffff | (0x7 << 24));
-+ insn |= (valid24 & 0x1fffff);
-+ insn |= ((valid24 & 0xe00000) << 3);
-+ *location = insn;
-+ }
-+ break;
-+ case R_UBICOM32_LO7_S:
-+ case R_UBICOM32_LO7_2_S:
-+ case R_UBICOM32_LO7_4_S:
-+ {
-+ /*
-+ * Bits 0 - 6 of the relocation are encoded into the
-+ * 7bit unsigned immediate fields of the SOURCE-1 field
-+ * of the instruction. The immediate value is left
-+ * shifted by (0, 1, 2) based on the operand size.
-+ */
-+ uint32_t valid7 = v & 0x7f;
-+ insn = *location;
-+
-+ if (elf32_rtype == R_UBICOM32_LO7_2_S) {
-+ valid7 >>= 1;
-+ } else if (elf32_rtype == R_UBICOM32_LO7_4_S) {
-+ valid7 >>= 2;
-+ }
-+
-+ insn &= ~(0x1f | (0x3 << 8));
-+ insn |= (valid7 & 0x1f);
-+ insn |= ((valid7 & 0x60) << 3);
-+ *location = insn;
-+ }
-+ break;
-+ case R_UBICOM32_LO7_D:
-+ case R_UBICOM32_LO7_2_D:
-+ case R_UBICOM32_LO7_4_D:
-+ {
-+ /*
-+ * Bits 0 - 6 of the relocation are encoded into the
-+ * 7bit unsigned immediate fields of the DESTINATION
-+ * field of the instruction. The immediate value is
-+ * left shifted by (0, 1, 2) based on the operand size.
-+ */
-+ uint32_t valid7 = v & 0x7f;
-+ insn = *location;
-+
-+ if (elf32_rtype == R_UBICOM32_LO7_2_D) {
-+ valid7 >>= 1;
-+ } else if (elf32_rtype == R_UBICOM32_LO7_4_D) {
-+ valid7 >>= 2;
-+ }
-+
-+ insn &= ~((0x1f | (0x3 << 8)) << 16);
-+ insn |= ((valid7 & 0x1f) << 16);
-+ insn |= ((valid7 & 0x60) << 19);
-+ *location = insn;
-+ }
-+ break;
-+ case R_UBICOM32_LO7_CALLI:
-+ case R_UBICOM32_LO16_CALLI:
-+ {
-+ /*
-+ * Extract the offset for a CALLI instruction. The
-+ * offsets can be either 7 bits or 18 bits. Since all
-+ * instructions in ubicom32 architecture are at work
-+ * aligned addresses the truncated offset is right
-+ * shifted by 2 before being encoded in the instruction.
-+ */
-+ uint32_t val;
-+ if (elf32_rtype == R_UBICOM32_LO7_CALLI) {
-+ val = v & 0x7f;
-+ } else {
-+ val = v & 0x3ffff;
-+ }
-+
-+ val >>= 2;
-+
-+ insn = *location;
-+
-+ insn &= ~0x071f071f;
-+ insn |= (val & 0x1f) << 0;
-+ val >>= 5;
-+ insn |= (val & 0x07) << 8;
-+ val >>= 3;
-+ insn |= (val & 0x1f) << 16;
-+ val >>= 5;
-+ insn |= (val & 0x07) << 24;
-+ *location = insn;
-+ }
-+ break;
-+ case R_UBICOM32_24_PCREL:
-+ {
-+ /*
-+ * Extract 26 bit signed PC relative offset for CALL
-+ * instructions. Since instruction addresses are word
-+ * aligned the offset is right shited by 2 before
-+ * encoding into instruction.
-+ */
-+ int32_t val = v - (int32_t)location;
-+
-+ /*
-+ * Check that the top 7 bits are all equal to the sign
-+ * bit (26), i.e all 0's or all 1's. If they are not then
-+ * the absolute difference is greater than 25 bits.
-+ */
-+ if (((uint32_t)val & 0xFE000000) != 0xFE000000 &&
-+ ((uint32_t)val & 0xFE000000) != 0x0) {
-+ /*
-+ * The relocation is beyond our addressable
-+ * range with a 26 bit call.
-+ */
-+ printk(KERN_ERR "module %s: PC Relative "
-+ "relocation out of range: "
-+ "%u (%x->%x, %x)\n",
-+ me->name, elf32_rtype,
-+ v, (uint32_t) location, val);
-+ return -ENOEXEC;
-+ }
-+
-+ val = (val & 0x3ffffff) >> 2;
-+ insn = *location;
-+ insn = insn & 0xf8e00000;
-+
-+ insn |= (val >> 21) << 24;
-+ insn |= (val & 0x1fffff);
-+ *location = insn;
-+ }
-+ break;
-+ case R_UBICOM32_LO16:
-+ case R_UBICOM32_HI16:
-+ {
-+ /*
-+ * 16 bit immediate value that is encoded into bit 0 -
-+ * 15 of the instruction.
-+ */
-+ uint32_t val;
-+
-+ if (elf32_rtype == R_UBICOM32_LO16) {
-+ val = v & 0xffff;
-+ } else {
-+ val = (v >> 16) & 0xffff;
-+ }
-+
-+ insn = *location;
-+ insn &= 0xffff0000;
-+
-+ insn |= val;
-+ *location = insn;
-+ }
-+ break;
-+ case R_UBICOM32_21_PCREL:
-+ {
-+ /*
-+ * Extract 23 bit signed PC relative offset for JMP<cc>
-+ * instructions. Since instruction addresses are word
-+ * aligned the offset is right shited by 2 before
-+ * encoding into instruction.
-+ */
-+ int32_t val = v - (int32_t)location;
-+
-+ val = (val & 0x7fffff) >> 2;
-+ insn = *location;
-+ insn = insn & 0xffe00000;
-+
-+ insn |= (val >> 21) << 24;
-+ insn |= val;
-+ *location = insn;
-+ }
-+ break;
-+ default:
-+ BUG();
-+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-+ me->name, elf32_rtype);
-+ return -ENOEXEC;
-+ }
-+ }
-+ return 0;
-+}
-+
-+int module_finalize(const Elf_Ehdr *hdr,
-+ const Elf_Shdr *sechdrs,
-+ struct module *mod)
-+{
-+ unsigned int i, strindex = 0, symindex = 0;
-+ char *secstrings;
-+ int err;
-+
-+ err = module_bug_finalize(hdr, sechdrs, mod);
-+ if (err)
-+ return err;
-+
-+ if (!mod->arch.ocm_inst) {
-+ /*
-+ * No OCM code, so nothing more to do.
-+ */
-+ return 0;
-+ }
-+
-+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-+
-+ for (i = 1; i < hdr->e_shnum; i++) {
-+ /* Internal symbols and strings. */
-+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
-+ symindex = i;
-+ strindex = sechdrs[i].sh_link;
-+ }
-+ }
-+
-+ for (i = 1; i < hdr->e_shnum; i++) {
-+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
-+ unsigned int info = sechdrs[i].sh_info;
-+
-+ /* Not a valid relocation section? */
-+ if (info >= hdr->e_shnum)
-+ continue;
-+
-+ if ((sechdrs[i].sh_type == SHT_RELA) &&
-+ (strncmp(".rela.ocm_text",
-+ secstrings + sechdrs[i].sh_name, 5 + 9) == 0)) {
-+ err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
-+ symindex, i, mod);
-+ if (err)
-+ return err;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+void module_arch_cleanup(struct module *mod)
-+{
-+ module_bug_cleanup(mod);
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/os_node.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/os_node.c
---- linux-2.6.30.10/arch/ubicom32/kernel/os_node.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/os_node.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,88 @@
-+/*
-+ * arch/ubicom32/kernel/os_node.c
-+ * <TODO: Replace with short file description>
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ */
-+#include "linux/types.h"
-+#include "linux/linkage.h"
-+#include "linux/uts.h"
-+#include "linux/utsrelease.h"
-+#include "linux/version.h"
-+#include <asm/ocm_size.h>
-+#include <asm/devtree.h>
-+#include <asm/ip5000.h>
-+
-+extern asmlinkage void *_start;
-+
-+/*
-+ * This file provides static information to the boot code allowing it to decide
-+ * if the os is compatible. Thus hopefully enabling the boot code to prevent
-+ * accidentally booting a kernel that has no hope of running.
-+ */
-+struct os_node {
-+ struct devtree_node node;
-+ unsigned long version; /* Always 1 */
-+ unsigned long entry_point;
-+ const char os_name[32]; /* For diagnostic purposes only */
-+ const char os_version_str[32];
-+ unsigned long os_version_num;
-+ unsigned long expected_ocm_code_start;/* OS Code */
-+ unsigned long expected_ocm_data_end; /* OS Data */
-+ unsigned long expected_ram_start;
-+ unsigned long expected_ram_end;
-+ unsigned long arch_version;
-+ unsigned long expected_os_syscall_begin;
-+ unsigned long expected_os_syscall_end;
-+};
-+
-+
-+extern void __os_syscall_begin;
-+extern void __os_syscall_end;
-+/*
-+ * The os_node is only referenced by head.S and should never be modified at
-+ * run-time.
-+ */
-+asmlinkage const struct os_node _os_node = {
-+ .node = {
-+ .next = NULL,
-+ .name = { "OS" },
-+ .magic = 0x10203040,
-+ },
-+ .version = 0x10002,
-+ .entry_point = (unsigned long)&_start,
-+#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
-+ .expected_ocm_code_start = OCMSTART + APP_OCM_CODE_SIZE,
-+ .expected_ocm_data_end = OCMEND - APP_OCM_DATA_SIZE,
-+#else
-+ .expected_ocm_code_start = OCMEND,
-+ .expected_ocm_data_end = OCMEND,
-+#endif
-+ .os_name = { UTS_SYSNAME },
-+ .os_version_str = { UTS_RELEASE },
-+ .os_version_num = LINUX_VERSION_CODE,
-+ .expected_ram_start = KERNELSTART,
-+ .expected_ram_end = SDRAMSTART + CONFIG_MIN_RAMSIZE,
-+ .arch_version = UBICOM32_ARCH_VERSION,
-+ .expected_os_syscall_begin = (unsigned long)&__os_syscall_begin,
-+ .expected_os_syscall_end = (unsigned long)&__os_syscall_end,
-+
-+
-+};
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/process.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/process.c
---- linux-2.6.30.10/arch/ubicom32/kernel/process.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/process.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,634 @@
-+/*
-+ * arch/ubicom32/kernel/process.c
-+ * Ubicom32 architecture-dependent process handling.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1995 Hamish Macdonald
-+ *
-+ * 68060 fixes by Jesper Skov
-+ *
-+ * uClinux changes
-+ * Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+/*
-+ * This file handles the architecture-dependent parts of process handling..
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/mm.h>
-+#include <linux/smp.h>
-+#include <linux/smp_lock.h>
-+#include <linux/stddef.h>
-+#include <linux/unistd.h>
-+#include <linux/ptrace.h>
-+#include <linux/slab.h>
-+#include <linux/user.h>
-+#include <linux/a.out.h>
-+#include <linux/interrupt.h>
-+#include <linux/reboot.h>
-+#include <linux/fs.h>
-+#include <linux/pm.h>
-+
-+#include <linux/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/traps.h>
-+#include <asm/machdep.h>
-+#include <asm/setup.h>
-+#include <asm/pgtable.h>
-+#include <asm/ip5000.h>
-+#include <asm/range-protect.h>
-+
-+#define DUMP_RANGE_REGISTER(REG, IDX) asm volatile ( \
-+ " move.4 %0, "REG"_RANGE"IDX"_EN \n\t" \
-+ " move.4 %1, "REG"_RANGE"IDX"_LO \n\t" \
-+ " move.4 %2, "REG"_RANGE"IDX"_HI \n\t" \
-+ : "=d"(en), "=d"(lo), "=d"(hi) \
-+ ); \
-+ printk(KERN_NOTICE REG"Range"IDX": en:%08x, range: %08x-%08x\n", \
-+ (unsigned int)en, \
-+ (unsigned int)lo, \
-+ (unsigned int)hi)
-+
-+asmlinkage void ret_from_fork(void);
-+
-+void (*pm_power_off)(void) = machine_power_off;
-+EXPORT_SYMBOL(pm_power_off);
-+
-+/* machine-dependent / hardware-specific power functions */
-+void (*mach_reset)(void);
-+void (*mach_halt)(void);
-+void (*mach_power_off)(void);
-+
-+/*
-+ * cpu_idle()
-+ * The idle thread.
-+ *
-+ * Our idle loop suspends and is woken up by a timer interrupt.
-+ */
-+void cpu_idle(void)
-+{
-+ while (1) {
-+ local_irq_disable();
-+ while (!need_resched()) {
-+ local_irq_enable();
-+ thread_suspend();
-+ local_irq_disable();
-+ }
-+ local_irq_enable();
-+ preempt_enable_no_resched();
-+ schedule();
-+ preempt_disable();
-+ }
-+}
-+
-+/*
-+ * dump_fpu()
-+ *
-+ * Fill in the fpu structure for a core dump. (just a stub as we don't have
-+ * an fpu)
-+ */
-+int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
-+{
-+ return 1;
-+}
-+
-+/*
-+ * machine_restart()
-+ * Resets the system.
-+ */
-+void machine_restart(char *__unused)
-+{
-+ /*
-+ * Disable all threads except myself. We can do this
-+ * directly without needing to call smp_send_stop
-+ * because we have a unique architecture where
-+ * one thread can disable one or more other threads.
-+ */
-+ thread_disable_others();
-+
-+ /*
-+ * Call the hardware-specific machine reset function.
-+ */
-+ if (mach_reset) {
-+ mach_reset();
-+ }
-+
-+ printk(KERN_EMERG "System Restarting\n");
-+
-+ /*
-+ * Set watchdog to trigger (after 1ms delay) (12 Mhz is the fixed OSC)
-+ */
-+ UBICOM32_IO_TIMER->tkey = TIMER_TKEYVAL;
-+ UBICOM32_IO_TIMER->wdcom = UBICOM32_IO_TIMER->mptval +
-+ (12000000 / 1000);
-+ UBICOM32_IO_TIMER->wdcfg = 0;
-+ UBICOM32_IO_TIMER->tkey = 0;
-+
-+ /*
-+ * Wait for watchdog
-+ */
-+ asm volatile (
-+ " move.4 MT_EN, #0 \n\t"
-+ " pipe_flush 0 \n\t"
-+ );
-+
-+ local_irq_disable();
-+ for (;;) {
-+ thread_suspend();
-+ }
-+}
-+
-+/*
-+ * machine_halt()
-+ * Halt the machine.
-+ *
-+ * Similar to machine_power_off, but don't shut off power. Add code
-+ * here to freeze the system for e.g. post-mortem debug purpose when
-+ * possible. This halt has nothing to do with the idle halt.
-+ */
-+void machine_halt(void)
-+{
-+ /*
-+ * Disable all threads except myself. We can do this
-+ * directly without needing to call smp_send_stop
-+ * because we have a unique architecture where
-+ * one thread can disable one or more other threads.
-+ */
-+ thread_disable_others();
-+
-+ /*
-+ * Call the hardware-specific machine halt function.
-+ */
-+ if (mach_halt) {
-+ mach_halt();
-+ }
-+
-+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
-+ local_irq_disable();
-+ for (;;) {
-+ thread_suspend();
-+ }
-+}
-+
-+/*
-+ * machine_power_off()
-+ * Turn the power off, if a power off handler is defined, otherwise, spin
-+ * endlessly.
-+ */
-+void machine_power_off(void)
-+{
-+ /*
-+ * Disable all threads except myself. We can do this
-+ * directly without needing to call smp_send_stop
-+ * because we have a unique architecture where
-+ * one thread can disable one or more other threads.
-+ */
-+ thread_disable_others();
-+
-+ /*
-+ * Call the hardware-specific machine power off function.
-+ */
-+ if (mach_power_off) {
-+ mach_power_off();
-+ }
-+
-+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
-+ local_irq_disable();
-+ for (;;) {
-+ thread_suspend();
-+ }
-+}
-+
-+/*
-+ * address_is_valid()
-+ * check if an address is valid -- (for read access)
-+ */
-+static bool address_is_valid(const void *address)
-+{
-+ int addr = (int)address;
-+ unsigned long socm, eocm, sdram, edram;
-+
-+ if (addr & 3)
-+ return false;
-+
-+ processor_ocm(&socm, &eocm);
-+ processor_dram(&sdram, &edram);
-+ if (addr >= socm && addr < eocm)
-+ return true;
-+
-+ if (addr >= sdram && addr < edram)
-+ return true;
-+
-+ return false;
-+}
-+
-+/*
-+ * vma_path_name_is_valid()
-+ * check if path_name of a vma is a valid string
-+ */
-+static bool vma_path_name_is_valid(const char *str)
-+{
-+#define MAX_NAME_LEN 256
-+ int i = 0;
-+ if (!address_is_valid(str))
-+ return false;
-+
-+ for (; i < MAX_NAME_LEN; i++, str++) {
-+ if (*str == '\0')
-+ return true;
-+ }
-+
-+ return false;
-+}
-+
-+/*
-+ * show_vmas()
-+ * show vma info of a process
-+ */
-+void show_vmas(struct task_struct *task)
-+{
-+#ifdef CONFIG_DEBUG_VERBOSE
-+#define UBICOM32_MAX_VMA_COUNT 1024
-+
-+ struct vm_area_struct *vma;
-+ struct file *file;
-+ char *name = "";
-+ int flags, loop = 0;
-+
-+ printk(KERN_NOTICE "Start of vma list\n");
-+
-+ if (!address_is_valid(task) || !address_is_valid(task->mm))
-+ goto error;
-+
-+ vma = task->mm->mmap;
-+ while (vma) {
-+ if (!address_is_valid(vma))
-+ goto error;
-+
-+ flags = vma->vm_flags;
-+ file = vma->vm_file;
-+
-+ if (file) {
-+ /* seems better to use dentry op here, but sanity check is easier this way */
-+ if (!address_is_valid(file) || !address_is_valid(file->f_path.dentry) || !vma_path_name_is_valid(file->f_path.dentry->d_name.name))
-+ goto error;
-+
-+ name = (char *)file->f_path.dentry->d_name.name;
-+ }
-+
-+ /* Similar to /proc/pid/maps format */
-+ printk(KERN_NOTICE "%08lx-%08lx %c%c%c%c %08lx %s\n",
-+ vma->vm_start,
-+ vma->vm_end,
-+ flags & VM_READ ? 'r' : '-',
-+ flags & VM_WRITE ? 'w' : '-',
-+ flags & VM_EXEC ? 'x' : '-',
-+ flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
-+ vma->vm_pgoff << PAGE_SHIFT,
-+ name);
-+
-+ vma = vma->vm_next;
-+
-+ if (loop++ > UBICOM32_MAX_VMA_COUNT)
-+ goto error;
-+ }
-+
-+ printk(KERN_NOTICE "End of vma list\n");
-+ return;
-+
-+error:
-+ printk(KERN_NOTICE "\nCorrupted vma list, abort!\n");
-+#endif
-+}
-+
-+/*
-+ * show_regs()
-+ * Print out all of the registers.
-+ */
-+void show_regs(struct pt_regs *regs)
-+{
-+ unsigned int i;
-+ unsigned int en, lo, hi;
-+
-+ printk(KERN_NOTICE "regs: %p, tid: %d\n",
-+ (void *)regs,
-+ thread_get_self());
-+
-+ printk(KERN_NOTICE "pc: %08x, previous_pc: %08x\n\n",
-+ (unsigned int)regs->pc,
-+ (unsigned int)regs->previous_pc);
-+
-+ printk(KERN_NOTICE "Data registers\n");
-+ for (i = 0; i < 16; i++) {
-+ printk("D%02d: %08x, ", i, (unsigned int)regs->dn[i]);
-+ if ((i % 4) == 3) {
-+ printk("\n");
-+ }
-+ }
-+ printk("\n");
-+
-+ printk(KERN_NOTICE "Address registers\n");
-+ for (i = 0; i < 8; i++) {
-+ printk("A%02d: %08x, ", i, (unsigned int)regs->an[i]);
-+ if ((i % 4) == 3) {
-+ printk("\n");
-+ }
-+ }
-+ printk("\n");
-+
-+ printk(KERN_NOTICE "acc0: %08x-%08x, acc1: %08x-%08x\n",
-+ (unsigned int)regs->acc0[1],
-+ (unsigned int)regs->acc0[0],
-+ (unsigned int)regs->acc1[1],
-+ (unsigned int)regs->acc1[0]);
-+
-+ printk(KERN_NOTICE "mac_rc16: %08x, source3: %08x\n",
-+ (unsigned int)regs->mac_rc16,
-+ (unsigned int)regs->source3);
-+
-+ printk(KERN_NOTICE "inst_cnt: %08x, csr: %08x\n",
-+ (unsigned int)regs->inst_cnt,
-+ (unsigned int)regs->csr);
-+
-+ printk(KERN_NOTICE "int_mask0: %08x, int_mask1: %08x\n",
-+ (unsigned int)regs->int_mask0,
-+ (unsigned int)regs->int_mask1);
-+
-+ /*
-+ * Dump range registers
-+ */
-+ DUMP_RANGE_REGISTER("I", "0");
-+ DUMP_RANGE_REGISTER("I", "1");
-+ DUMP_RANGE_REGISTER("I", "2");
-+ DUMP_RANGE_REGISTER("I", "3");
-+ DUMP_RANGE_REGISTER("D", "0");
-+ DUMP_RANGE_REGISTER("D", "1");
-+ DUMP_RANGE_REGISTER("D", "2");
-+ DUMP_RANGE_REGISTER("D", "3");
-+ DUMP_RANGE_REGISTER("D", "4");
-+
-+ printk(KERN_NOTICE "frame_type: %d, nesting_level: %d, thread_type %d\n\n",
-+ (int)regs->frame_type,
-+ (int)regs->nesting_level,
-+ (int)regs->thread_type);
-+}
-+
-+/*
-+ * kernel_thread_helper()
-+ * On execution d0 will be 0, d1 will be the argument to be passed to the
-+ * kernel function. d2 contains the kernel function that needs to get
-+ * called. d3 will contain address to do_exit which need to get moved
-+ * into a5. On return from fork the child thread d0 will be 0. We call
-+ * this dummy function which in turn loads the argument
-+ */
-+asmlinkage void kernel_thread_helper(void);
-+
-+/*
-+ * kernel_thread()
-+ * Create a kernel thread
-+ */
-+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-+{
-+ struct pt_regs regs;
-+
-+ memset(®s, 0, sizeof(regs));
-+
-+ regs.dn[1] = (unsigned long)arg;
-+ regs.dn[2] = (unsigned long)fn;
-+ regs.dn[3] = (unsigned long)do_exit;
-+ regs.an[5] = (unsigned long)kernel_thread_helper;
-+ regs.pc = (unsigned long)kernel_thread_helper;
-+ regs.nesting_level = 0;
-+ regs.thread_type = KERNEL_THREAD;
-+
-+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED,
-+ 0, ®s, 0, NULL, NULL);
-+}
-+EXPORT_SYMBOL(kernel_thread);
-+
-+/*
-+ * flush_thread()
-+ * XXX todo
-+ */
-+void flush_thread(void)
-+{
-+ /* XXX todo */
-+}
-+
-+/*
-+ * sys_fork()
-+ * Not implemented on no-mmu.
-+ */
-+asmlinkage int sys_fork(struct pt_regs *regs)
-+{
-+ /* fork almost works, enough to trick you into looking elsewhere :-( */
-+ return -EINVAL;
-+}
-+
-+/*
-+ * sys_vfork()
-+ * By the time we get here, the non-volatile registers have also been saved
-+ * on the stack. We do some ugly pointer stuff here.. (see also copy_thread
-+ * which does context copy).
-+ */
-+asmlinkage int sys_vfork(struct pt_regs *regs)
-+{
-+ unsigned long old_sp = regs->an[7];
-+ unsigned long old_a5 = regs->an[5];
-+ unsigned long old_return_address;
-+ long do_fork_return;
-+
-+ /*
-+ * Read the old retrun address from the stack.
-+ */
-+ if (copy_from_user(&old_return_address,
-+ (void *)old_sp, sizeof(unsigned long))) {
-+ force_sig(SIGSEGV, current);
-+ return 0;
-+ }
-+
-+ /*
-+ * Pop the vfork call frame by setting a5 and pc to the old_return
-+ * address and incrementing the stack pointer by 4.
-+ */
-+ regs->an[5] = old_return_address;
-+ regs->pc = old_return_address;
-+ regs->an[7] += 4;
-+
-+ do_fork_return = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
-+ regs->an[7], regs, 0, NULL, NULL);
-+
-+ /*
-+ * Now we have to test if the return code is an error. If it is an error
-+ * then restore the frame and we will execute error processing in user
-+ * space. Other wise the child and the parent will return to the correct
-+ * places.
-+ */
-+ if ((unsigned long)(do_fork_return) >= (unsigned long)(-125)) {
-+ /*
-+ * Error case. We need to restore the frame.
-+ */
-+ regs->an[5] = old_a5;
-+ regs->pc = old_a5;
-+ regs->an[7] = old_sp;
-+ }
-+
-+ return do_fork_return;
-+}
-+
-+/*
-+ * sys_clone()
-+ * creates a child thread.
-+ */
-+asmlinkage int sys_clone(unsigned long clone_flags,
-+ unsigned long newsp,
-+ struct pt_regs *regs)
-+{
-+ if (!newsp)
-+ newsp = regs->an[7];
-+ return do_fork(clone_flags, newsp, regs, 0,
-+ NULL, NULL);
-+}
-+
-+/*
-+ * copy_thread()
-+ * low level thread copy, only used by do_fork in kernel/fork.c
-+ */
-+int copy_thread(unsigned long clone_flags,
-+ unsigned long usp, unsigned long topstk,
-+ struct task_struct *p, struct pt_regs *regs)
-+
-+{
-+ struct pt_regs *childregs;
-+
-+ childregs = (struct pt_regs *)
-+ (task_stack_page(p) + THREAD_SIZE - 8) - 1;
-+
-+ *childregs = *regs;
-+
-+ /*
-+ * Set return value for child to be 0.
-+ */
-+ childregs->dn[0] = 0;
-+
-+ if (usp)
-+ childregs->an[7] = usp;
-+ else
-+ childregs->an[7] = (unsigned long)task_stack_page(p) +
-+ THREAD_SIZE - 8;
-+
-+ /*
-+ * Set up the switch_to frame to return to "ret_from_fork"
-+ */
-+ p->thread.a5 = (unsigned long)ret_from_fork;
-+ p->thread.sp = (unsigned long)childregs;
-+
-+ return 0;
-+}
-+
-+/*
-+ * sys_execve()
-+ * executes a new program.
-+ */
-+asmlinkage int sys_execve(char *name, char **argv,
-+ char **envp, struct pt_regs *regs)
-+{
-+ int error;
-+ char *filename;
-+
-+ lock_kernel();
-+ filename = getname(name);
-+ error = PTR_ERR(filename);
-+ if (IS_ERR(filename))
-+ goto out;
-+ error = do_execve(filename, argv, envp, regs);
-+ putname(filename);
-+ asm (" .global sys_execve_complete\n"
-+ " sys_execve_complete:");
-+out:
-+ unlock_kernel();
-+ return error;
-+}
-+
-+/*
-+ * Return saved PC of a blocked thread.
-+ */
-+unsigned long thread_saved_pc(struct task_struct *tsk)
-+{
-+ return tsk->thread.a5;
-+}
-+
-+
-+unsigned long get_wchan(struct task_struct *p)
-+{
-+ unsigned long pc;
-+
-+ /*
-+ * If we don't have a process, or it is not the current
-+ * one or not RUNNING, it makes no sense to ask for a
-+ * wchan.
-+ */
-+ if (!p || p == current || p->state == TASK_RUNNING)
-+ return 0;
-+
-+ /*
-+ * TODO: If the process is in the middle of schedule, we
-+ * are supposed to do something different but for now we
-+ * will return the same thing in both situations.
-+ */
-+ pc = thread_saved_pc(p);
-+ if (in_sched_functions(pc))
-+ return pc;
-+ return pc;
-+}
-+
-+
-+/*
-+ * Infrequently used interface to dump task registers to core files.
-+ */
-+int dump_task_regs(struct task_struct *task, elf_gregset_t *elfregs)
-+{
-+ struct pt_regs *regs = task_pt_regs(task);
-+ *(struct pt_regs *)elfregs = *regs;
-+
-+ return 1;
-+}
-+
-+/*
-+ * __switch_to is the function that implements the contex save and
-+ * switch within the kernel. Since this is a function call very few
-+ * registers have to be saved to pull this off. d0 holds prev and we
-+ * want to preserve it. prev_switch is a pointer to task->thread
-+ * structure. This is where we will save the register state. next_switch
-+ * is pointer to the next task's thread structure that holds the
-+ * registers.
-+ */
-+asmlinkage void *__switch_to(struct task_struct *prev,
-+ struct thread_struct *prev_switch,
-+ struct thread_struct *next_switch)
-+ __attribute__((naked));
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/processor.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/processor.c
---- linux-2.6.30.10/arch/ubicom32/kernel/processor.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/processor.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,348 @@
-+/*
-+ * arch/ubicom32/kernel/processor.c
-+ * Ubicom32 architecture processor info implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/profile.h>
-+#include <linux/clocksource.h>
-+#include <linux/types.h>
-+#include <linux/seq_file.h>
-+#include <linux/delay.h>
-+#include <linux/cpu.h>
-+#include <asm/devtree.h>
-+#include <asm/processor.h>
-+#include <asm/cpu.h>
-+#include <asm/ocm_size.h>
-+
-+struct procnode {
-+ struct devtree_node dn;
-+ unsigned int threads;
-+ unsigned int timers;
-+ unsigned int frequency;
-+ unsigned int ddr_frequency;
-+ unsigned int interrupt0;
-+ unsigned int interrupt1;
-+ void *socm;
-+ void *eocm;
-+ void *sdram;
-+ void *edram;
-+ unsigned int arch_version;
-+ void *os_syscall_begin;
-+ void *os_syscall_end;
-+};
-+
-+struct procnode *pn;
-+
-+/*
-+ * show_processorinfo()
-+ * Print the actual processor information.
-+ */
-+static void show_processorinfo(struct seq_file *m)
-+{
-+ char *cpu, *mmu, *fpu;
-+ unsigned int clockfreq;
-+ unsigned int chipid;
-+
-+ cpu = CPU;
-+ mmu = "none";
-+ fpu = "none";
-+
-+ asm volatile (
-+ "move.4 %0, CHIP_ID \n\t"
-+ : "=r" (chipid)
-+ );
-+
-+ /*
-+ * General Processor Information.
-+ */
-+ seq_printf(m, "Vendor:\t\t%s\n", "Ubicom");
-+ seq_printf(m, "CPU:\t\t%s\n", cpu);
-+ seq_printf(m, "MMU:\t\t%s\n", mmu);
-+ seq_printf(m, "FPU:\t\t%s\n", fpu);
-+ seq_printf(m, "Arch:\t\t%hx\n", chipid >> 16);
-+ seq_printf(m, "Rev:\t\t%hx\n", (chipid & 0xffff));
-+
-+ /*
-+ * Now compute the clock frequency in Mhz.
-+ */
-+ clockfreq = processor_frequency();
-+ seq_printf(m, "Clock Freq:\t%u.0 MHz\n",
-+ clockfreq / 1000000);
-+ seq_printf(m, "DDR Freq:\t%u.0 MHz\n",
-+ pn ? pn->ddr_frequency / 1000000 : 0);
-+ seq_printf(m, "BogoMips:\t%lu.%02lu\n",
-+ (loops_per_jiffy * HZ) / 500000,
-+ ((loops_per_jiffy * HZ) / 5000) % 100);
-+ seq_printf(m, "Calibration:\t%lu loops\n", (loops_per_jiffy * HZ));
-+}
-+
-+/*
-+ * show_cpuinfo()
-+ * Get CPU information for use by the procfs.
-+ */
-+static int show_cpuinfo(struct seq_file *m, void *v)
-+{
-+ unsigned long n = (unsigned long)v - 1;
-+
-+#if defined(CONFIG_SMP)
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, n);
-+#endif
-+
-+ /*
-+ * Print the general processor information on the first
-+ * call.
-+ */
-+ if (n == 0) {
-+ show_processorinfo(m);
-+ }
-+
-+#if defined(CONFIG_SMP)
-+ /*
-+ * For each hwthread, print if this hwthread is running Linux
-+ * or is an I/O thread.
-+ */
-+ if (cpu_isset(n, cpu_online_map)) {
-+ seq_printf(m, "cpu[%02lu]:\tthread id - %lu\n", n, p->tid);
-+ } else {
-+ seq_printf(m, "cpu[%02lu]:\toff-line\n", n);
-+ }
-+#endif
-+ return 0;
-+
-+}
-+
-+static void *c_start(struct seq_file *m, loff_t *pos)
-+{
-+ unsigned long i = *pos;
-+
-+ return i < NR_CPUS ? (void *)(i + 1) : NULL;
-+}
-+
-+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-+{
-+ ++*pos;
-+ return c_start(m, pos);
-+}
-+
-+static void c_stop(struct seq_file *m, void *v)
-+{
-+}
-+
-+const struct seq_operations cpuinfo_op = {
-+ .start = c_start,
-+ .next = c_next,
-+ .stop = c_stop,
-+ .show = show_cpuinfo,
-+};
-+
-+/*
-+ * processor_timers()
-+ * Returns the timers available to Linux.
-+ */
-+unsigned int processor_timers(void)
-+{
-+ if (!pn) {
-+ return 0;
-+ }
-+ return pn->timers;
-+}
-+
-+/*
-+ * processor_threads()
-+ * Returns the threads available to Linux.
-+ */
-+unsigned int processor_threads(void)
-+{
-+ if (!pn) {
-+ return 0;
-+ }
-+ return pn->threads;
-+}
-+
-+/*
-+ * processor_frequency()
-+ * Returns the frequency of the system clock.
-+ */
-+unsigned int processor_frequency(void)
-+{
-+ if (!pn) {
-+ return 0;
-+ }
-+ return pn->frequency;
-+}
-+EXPORT_SYMBOL(processor_frequency);
-+
-+/*
-+ * processor_interrupts()
-+ * Return the interrupts that are setup at boot time.
-+ */
-+int processor_interrupts(unsigned int *int0, unsigned int *int1)
-+{
-+ if (!pn) {
-+ return -EFAULT;
-+ }
-+
-+ if (int0) {
-+ *int0 = pn->interrupt0;
-+ }
-+
-+ if (int1) {
-+ *int1 = pn->interrupt1;
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * processor_ocm()
-+ * Returns the start and end of OCM available to Linux.
-+ */
-+void processor_ocm(unsigned long *socm, unsigned long *eocm)
-+{
-+ *socm = (unsigned long)pn->socm;
-+ *eocm = (unsigned long)pn->eocm;
-+}
-+
-+/*
-+ * processor_dram()
-+ * Returns the start and end of dram available to Linux.
-+ */
-+void processor_dram(unsigned long *sdram, unsigned long *edram)
-+{
-+ *sdram = (unsigned long)pn->sdram;
-+ *edram = (unsigned long)pn->edram;
-+}
-+
-+/*
-+ * processor_validate_failed()
-+ * Returns the dram available to Linux.
-+ */
-+static noinline void processor_validate_failed(void)
-+{
-+ while (1)
-+ THREAD_STALL;
-+}
-+
-+/*
-+ * processor_validate()
-+ * Validates the procnode against limitations of this link/built.
-+ */
-+static void processor_validate(void)
-+{
-+ void *dram_start = (void *)(KERNELSTART);
-+ void *dram_end = (void *)(SDRAMSTART + CONFIG_MIN_RAMSIZE);
-+#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
-+ void *ocm_code_start = (void *)(OCMSTART + APP_OCM_CODE_SIZE);
-+ void *ocm_data_end = (void *)(OCMEND - APP_OCM_DATA_SIZE);
-+#endif
-+ extern void __os_syscall_begin;
-+ extern void __os_syscall_end;
-+ int proc_node_valid = 1;
-+
-+ if (!pn) {
-+ printk(KERN_ERR "ERROR: processor node not found\n");
-+ goto error;
-+ }
-+
-+
-+ if (dram_start < pn->sdram || dram_end > pn->edram) {
-+ printk(KERN_ERR "ERROR: processor dram mismatch %p-%p "
-+ "available but we are expecting %p-%p\n",
-+ pn->sdram, pn->edram, dram_start, dram_end);
-+ proc_node_valid = 0;
-+ } else {
-+ printk(KERN_ERR "processor dram %p-%p, expecting %p-%p\n",
-+ pn->sdram, pn->edram, dram_start, dram_end);
-+ }
-+ if (&__os_syscall_begin < pn->os_syscall_begin ||
-+ &__os_syscall_end > pn->os_syscall_end) {
-+ printk(KERN_ERR "ERROR: processor syscall area mismatch "
-+ "%p-%p available but we are expecting %p-%p\n",
-+ pn->os_syscall_begin, pn->os_syscall_end,
-+ &__os_syscall_begin, &__os_syscall_end);
-+ proc_node_valid = 0;
-+ } else {
-+ printk(KERN_ERR "processor dram %p-%p, expecting %p-%p\n",
-+ pn->sdram, pn->edram, dram_start, dram_end);
-+ }
-+#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
-+ if (ocm_code_start < pn->socm || ocm_data_end > pn->eocm) {
-+ printk(KERN_ERR "ERROR: processor ocm mismatch %p-%p "
-+ "available but we are expecting %p-%p\n",
-+ pn->socm, pn->eocm, ocm_code_start, ocm_data_end);
-+ proc_node_valid = 0;
-+ } else {
-+ printk(KERN_INFO "processor ocm %p-%p, expecting %p-%p\n",
-+ pn->socm, pn->eocm, ocm_code_start, ocm_data_end);
-+
-+ }
-+#endif
-+
-+ if (UBICOM32_ARCH_VERSION != pn->arch_version) {
-+ printk(KERN_ERR "ERROR: processor arch mismatch, kernel"
-+ "compiled for %d found %d\n",
-+ UBICOM32_ARCH_VERSION, pn->arch_version);
-+ proc_node_valid = 0;
-+ }
-+
-+ if (proc_node_valid)
-+ return;
-+error:
-+ processor_validate_failed();
-+}
-+
-+void __init processor_init(void)
-+{
-+ /*
-+ * If we do not have a trap node in the device tree, we leave the fault
-+ * handling to the underlying hardware.
-+ */
-+ pn = (struct procnode *)devtree_find_node("processor");
-+
-+ processor_validate();
-+
-+ /*
-+ * If necessary correct the initial range registers to cover the
-+ * complete physical space
-+ */
-+ if (pn->edram > (void *)(SDRAMSTART + CONFIG_MIN_RAMSIZE)) {
-+ printk(KERN_INFO "updating range registers for expanded dram\n");
-+ asm volatile (
-+ " move.4 D_RANGE1_HI, %0 \t\n"
-+ " move.4 I_RANGE0_HI, %0 \t\n"
-+#ifdef CONFIG_PROTECT_KERNEL
-+ " move.4 D_RANGE2_HI, %0 \t\n"
-+ " move.4 I_RANGE2_HI, %0 \t\n"
-+#endif
-+ : : "a"((unsigned long)pn->edram - 4)
-+ );
-+ }
-+
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/ptrace.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/ptrace.c
---- linux-2.6.30.10/arch/ubicom32/kernel/ptrace.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/ptrace.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,275 @@
-+/*
-+ * arch/ubicom32/kernel/ptrace.c
-+ * Ubicom32 architecture ptrace implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * (C) 1994 by Hamish Macdonald
-+ * Taken from linux/kernel/ptrace.c and modified for M680x0.
-+ * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/smp.h>
-+#include <linux/errno.h>
-+#include <linux/ptrace.h>
-+#include <linux/user.h>
-+#include <linux/signal.h>
-+#include <linux/uaccess.h>
-+
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <asm/cacheflush.h>
-+#include <asm/processor.h>
-+
-+/*
-+ * ptrace_getregs()
-+ *
-+ * Get all user integer registers.
-+ */
-+static inline int ptrace_getregs(struct task_struct *task, void __user *uregs)
-+{
-+ struct pt_regs *regs = task_pt_regs(task);
-+ return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-+}
-+
-+/*
-+ * ptrace_get_reg()
-+ *
-+ * Get contents of register REGNO in task TASK.
-+ */
-+static unsigned long ptrace_get_reg(struct task_struct *task, int regno)
-+{
-+ if (regno < sizeof(struct pt_regs)) {
-+ struct pt_regs *pt_regs = task_pt_regs(task);
-+ return *(unsigned long *)((long) pt_regs + regno);
-+ }
-+
-+ return -EIO;
-+}
-+
-+/*
-+ * ptrace_put_reg()
-+ * Write contents of register REGNO in task TASK.
-+ */
-+static int ptrace_put_reg(struct task_struct *task, int regno,
-+ unsigned long data)
-+{
-+ if (regno <= sizeof(struct pt_regs) && regno != PT_FRAME_TYPE) {
-+ struct pt_regs *pt_regs = task_pt_regs(task);
-+ *(unsigned long *)((long) pt_regs + regno) = data;
-+ return 0;
-+ }
-+ return -EIO;
-+}
-+
-+/*
-+ * ptrace_disable_single_step()
-+ * Disable Single Step
-+ */
-+static int ptrace_disable_single_step(struct task_struct *task)
-+{
-+ /*
-+ * Single Step not yet implemented, so must always be disabled
-+ */
-+ return 0;
-+}
-+
-+/*
-+ * ptrace_disable()
-+ * Make sure the single step bit is not set.
-+ * Called by kernel/ptrace.c when detaching..
-+ */
-+void ptrace_disable(struct task_struct *child)
-+{
-+ ptrace_disable_single_step(child);
-+}
-+
-+/*
-+ * arch_ptrace()
-+ * architecture specific ptrace routine.
-+ */
-+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-+{
-+ int ret;
-+ switch (request) {
-+ /* when I and D space are separate, these will need to be fixed. */
-+ case PTRACE_PEEKTEXT: /* read word at location addr. */
-+ case PTRACE_PEEKDATA:
-+ ret = generic_ptrace_peekdata(child, addr, data);
-+ break;
-+
-+ /* read the word at location addr in the USER area. */
-+ case PTRACE_PEEKUSR: {
-+ unsigned long tmp;
-+
-+ ret = -EIO;
-+ if (((unsigned long) addr > PT_INTERP_FDPIC_LOADMAP)
-+ || (addr & 3))
-+ break;
-+
-+ tmp = 0; /* Default return condition */
-+
-+ ret = -EIO;
-+ if (addr < sizeof(struct pt_regs)) {
-+ tmp = ptrace_get_reg(child, addr);
-+ } else if (addr == PT_TEXT_ADDR) {
-+ tmp = child->mm->start_code;
-+ } else if (addr == PT_TEXT_END_ADDR) {
-+ tmp = child->mm->end_code;
-+ } else if (addr == PT_DATA_ADDR) {
-+ tmp = child->mm->start_data;
-+ } else if (addr == PT_EXEC_FDPIC_LOADMAP) {
-+#ifdef CONFIG_BINFMT_ELF_FDPIC
-+ tmp = child->mm->context.exec_fdpic_loadmap;
-+#endif
-+ } else if (addr == PT_INTERP_FDPIC_LOADMAP) {
-+#ifdef CONFIG_BINFMT_ELF_FDPIC
-+ tmp = child->mm->context.interp_fdpic_loadmap;
-+#endif
-+ } else {
-+ break;
-+ }
-+
-+ ret = put_user(tmp, (unsigned long *)data);
-+ break;
-+ }
-+
-+ case PTRACE_POKETEXT: /* write the word at location addr. */
-+ case PTRACE_POKEDATA:
-+ ret = generic_ptrace_pokedata(child, addr, data);
-+
-+ /*
-+ * If we just changed some code so we need to
-+ * correct the caches
-+ */
-+ if (request == PTRACE_POKETEXT && ret == 0) {
-+ flush_icache_range(addr, addr + 4);
-+ }
-+ break;
-+
-+ case PTRACE_POKEUSR: /* write the word at location addr
-+ * in the USER area */
-+ ret = -EIO;
-+
-+ if (((unsigned long) addr > PT_DATA_ADDR) || (addr & 3))
-+ break;
-+
-+ if (addr < sizeof(struct pt_regs)) {
-+ ret = ptrace_put_reg(child, addr, data);
-+ }
-+ break;
-+
-+ case PTRACE_SYSCALL: /* continue and stop at next (return from)
-+ * syscall */
-+ case PTRACE_CONT: { /* restart after signal. */
-+
-+ ret = -EIO;
-+ if (!valid_signal(data))
-+ break;
-+ if (request == PTRACE_SYSCALL)
-+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-+ else
-+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-+ child->exit_code = data;
-+ /* make sure the single step bit is not set. */
-+ ptrace_disable_single_step(child);
-+ wake_up_process(child);
-+ ret = 0;
-+ break;
-+ }
-+
-+ /*
-+ * make the child exit. Best I can do is send it a sigkill.
-+ * perhaps it should be put in the status that it wants to exit.
-+ */
-+ case PTRACE_KILL: {
-+ ret = 0;
-+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-+ break;
-+ child->exit_code = SIGKILL;
-+ /* make sure the single step bit is not set. */
-+ ptrace_disable_single_step(child);
-+ wake_up_process(child);
-+ break;
-+ }
-+
-+ case PTRACE_DETACH: /* detach a process that was attached. */
-+ ret = ptrace_detach(child, data);
-+ break;
-+
-+ case PTRACE_GETREGS: /* Get all gp regs from the child. */
-+ ptrace_getregs(child, (unsigned long *)data);
-+ ret = 0;
-+ break;
-+
-+ case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-+ int i;
-+ unsigned long tmp;
-+ int count = sizeof(struct pt_regs) / sizeof(unsigned long);
-+ for (i = 0; i < count; i++) {
-+ if (get_user(tmp, (unsigned long *) data)) {
-+ ret = -EFAULT;
-+ break;
-+ }
-+ ptrace_put_reg(child, sizeof(unsigned long) * i, tmp);
-+ data += sizeof(long);
-+ }
-+ ret = 0;
-+ break;
-+ }
-+
-+ default:
-+ return ptrace_request(child, request, addr, data);
-+ break;
-+ }
-+ return ret;
-+}
-+/*
-+ * syscall_trace
-+ *
-+ * called by syscall enter/exit when the TIF_SYSCALL_TRACE bit is set.
-+ */
-+asmlinkage void syscall_trace(void)
-+{
-+ struct task_struct *cur = current;
-+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
-+ return;
-+ if (!(cur->ptrace & PT_PTRACED))
-+ return;
-+ ptrace_notify(SIGTRAP | ((cur->ptrace & PT_TRACESYSGOOD)
-+ ? 0x80 : 0));
-+ /*
-+ * this isn't the same as continuing with a signal, but it will do
-+ * for normal use. strace only continues with a signal if the
-+ * stopping signal is not SIGTRAP. -brl
-+ */
-+ if (cur->exit_code) {
-+ send_sig(cur->exit_code, current, 1);
-+ current->exit_code = 0;
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/semaphore.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/semaphore.c
---- linux-2.6.30.10/arch/ubicom32/kernel/semaphore.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/semaphore.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,159 @@
-+/*
-+ * arch/ubicom32/kernel/semaphore.c
-+ * Ubicom32 architecture semaphore implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ * Generic semaphore code. Buyer beware. Do your own
-+ * specific changes in <asm/semaphore-helper.h>
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <asm/semaphore-helper.h>
-+
-+#ifndef CONFIG_RMW_INSNS
-+spinlock_t semaphore_wake_lock;
-+#endif
-+
-+/*
-+ * Semaphores are implemented using a two-way counter:
-+ * The "count" variable is decremented for each process
-+ * that tries to sleep, while the "waking" variable is
-+ * incremented when the "up()" code goes to wake up waiting
-+ * processes.
-+ *
-+ * Notably, the inline "up()" and "down()" functions can
-+ * efficiently test if they need to do any extra work (up
-+ * needs to do something only if count was negative before
-+ * the increment operation.
-+ *
-+ * waking_non_zero() (from asm/semaphore.h) must execute
-+ * atomically.
-+ *
-+ * When __up() is called, the count was negative before
-+ * incrementing it, and we need to wake up somebody.
-+ *
-+ * This routine adds one to the count of processes that need to
-+ * wake up and exit. ALL waiting processes actually wake up but
-+ * only the one that gets to the "waking" field first will gate
-+ * through and acquire the semaphore. The others will go back
-+ * to sleep.
-+ *
-+ * Note that these functions are only called when there is
-+ * contention on the lock, and as such all this is the
-+ * "non-critical" part of the whole semaphore business. The
-+ * critical part is the inline stuff in <asm/semaphore.h>
-+ * where we want to avoid any extra jumps and calls.
-+ */
-+void __up(struct semaphore *sem)
-+{
-+ wake_one_more(sem);
-+ wake_up(&sem->wait);
-+}
-+
-+/*
-+ * Perform the "down" function. Return zero for semaphore acquired,
-+ * return negative for signalled out of the function.
-+ *
-+ * If called from __down, the return is ignored and the wait loop is
-+ * not interruptible. This means that a task waiting on a semaphore
-+ * using "down()" cannot be killed until someone does an "up()" on
-+ * the semaphore.
-+ *
-+ * If called from __down_interruptible, the return value gets checked
-+ * upon return. If the return value is negative then the task continues
-+ * with the negative value in the return register (it can be tested by
-+ * the caller).
-+ *
-+ * Either form may be used in conjunction with "up()".
-+ *
-+ */
-+
-+
-+#define DOWN_HEAD(task_state) \
-+ \
-+ \
-+ current->state = (task_state); \
-+ add_wait_queue(&sem->wait, &wait); \
-+ \
-+ /* \
-+ * Ok, we're set up. sem->count is known to be less than zero \
-+ * so we must wait. \
-+ * \
-+ * We can let go the lock for purposes of waiting. \
-+ * We re-acquire it after awaking so as to protect \
-+ * all semaphore operations. \
-+ * \
-+ * If "up()" is called before we call waking_non_zero() then \
-+ * we will catch it right away. If it is called later then \
-+ * we will have to go through a wakeup cycle to catch it. \
-+ * \
-+ * Multiple waiters contend for the semaphore lock to see \
-+ * who gets to gate through and who has to wait some more. \
-+ */ \
-+ for (;;) {
-+
-+#define DOWN_TAIL(task_state) \
-+ current->state = (task_state); \
-+ } \
-+ current->state = TASK_RUNNING; \
-+ remove_wait_queue(&sem->wait, &wait);
-+
-+void __sched __down(struct semaphore *sem)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+ DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-+ if (waking_non_zero(sem))
-+ break;
-+ schedule();
-+ DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-+}
-+
-+int __sched __down_interruptible(struct semaphore *sem)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+ int ret = 0;
-+
-+ DOWN_HEAD(TASK_INTERRUPTIBLE)
-+
-+ ret = waking_non_zero_interruptible(sem, current);
-+ if (ret) {
-+ if (ret == 1)
-+ /* ret != 0 only if we get interrupted -arca */
-+ ret = 0;
-+ break;
-+ }
-+ schedule();
-+ DOWN_TAIL(TASK_INTERRUPTIBLE)
-+ return ret;
-+}
-+
-+int __down_trylock(struct semaphore *sem)
-+{
-+ return waking_non_zero_trylock(sem);
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/setup.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/setup.c
---- linux-2.6.30.10/arch/ubicom32/kernel/setup.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/setup.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,194 @@
-+/*
-+ * arch/ubicom32/kernel/setup.c
-+ * Ubicom32 architecture-dependent parts of system setup.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com)
-+ * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uClinux.org>
-+ * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
-+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
-+ * Copyright (C) 1995 Hamish Macdonald
-+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
-+ * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
-+ * 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/fb.h>
-+#include <linux/module.h>
-+#include <linux/console.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/bootmem.h>
-+#include <linux/seq_file.h>
-+#include <linux/init.h>
-+
-+#include <asm/devtree.h>
-+#include <asm/setup.h>
-+#include <asm/irq.h>
-+#include <asm/machdep.h>
-+#include <asm/pgtable.h>
-+#include <asm/pgalloc.h>
-+#include <asm/ubicom32-common.h>
-+#include <asm/processor.h>
-+#include <asm/bootargs.h>
-+#include <asm/thread.h>
-+
-+unsigned long memory_start;
-+EXPORT_SYMBOL(memory_start);
-+
-+unsigned long memory_end;
-+EXPORT_SYMBOL(memory_end);
-+
-+static char __initdata command_line[COMMAND_LINE_SIZE];
-+#ifdef CONFIG_CMDLINE_BOOL
-+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-+#endif
-+
-+extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
-+
-+/*
-+ * setup_arch()
-+ * Setup the architecture dependent portions of the system.
-+ */
-+void __init setup_arch(char **cmdline_p)
-+{
-+ int bootmap_size;
-+ unsigned long ram_start;
-+
-+ processor_init();
-+ bootargs_init();
-+
-+ /*
-+ * Use the link for memory_start from the link and the processor
-+ * node for memory_end.
-+ */
-+ memory_start = PAGE_ALIGN(((unsigned long)&_end));
-+ processor_dram(&ram_start, &memory_end);
-+
-+ init_mm.start_code = (unsigned long) &_stext;
-+ init_mm.end_code = (unsigned long) &_etext;
-+ init_mm.end_data = (unsigned long) &_edata;
-+ init_mm.brk = (unsigned long) 0;
-+
-+ /*
-+ * bootexec copies the original default command line to end of memory.
-+ * u-boot can modify it there (i.e. to enable network boot) and the
-+ * kernel picks up the modified version.
-+ *
-+ * mainexec creates a `new default' command_line which is in the
-+ * bootargs devnode. It is updated on every firmware update but
-+ * not used at the moment.
-+ */
-+ strlcpy(boot_command_line, (char *)(memory_end - COMMAND_LINE_SIZE), COMMAND_LINE_SIZE);
-+
-+#ifdef CONFIG_CMDLINE_BOOL
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-+#else
-+ if (builtin_cmdline[0]) {
-+ /* append boot loader cmdline to builtin */
-+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
-+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-+ }
-+#endif
-+#endif
-+
-+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-+ *cmdline_p = command_line;
-+
-+ parse_early_param();
-+
-+ printk(KERN_INFO "%s Processor, Ubicom, Inc. <www.ubicom.com>\n", CPU);
-+
-+#if defined(DEBUG)
-+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-+ "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-+ (int) &_sdata, (int) &_edata,
-+ (int) &_sbss, (int) &_ebss);
-+ printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
-+ (int) &_ebss, (int) memory_start,
-+ (int) memory_start, (int) memory_end);
-+#endif
-+
-+#ifdef DEBUG
-+ if (strlen(*cmdline_p))
-+ printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-+#endif
-+
-+#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
-+ conswitchp = &dummy_con;
-+#endif
-+
-+ /*
-+ * If we have a device tree, see if we have the nodes we need.
-+ */
-+ if (devtree) {
-+ devtree_print();
-+ }
-+
-+ /*
-+ * From the arm initialization comment:
-+ *
-+ * This doesn't seem to be used by the Linux memory manager any
-+ * more, but is used by ll_rw_block. If we can get rid of it, we
-+ * also get rid of some of the stuff above as well.
-+ *
-+ * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
-+ * the system, not the maximum PFN.
-+ */
-+ max_pfn = max_low_pfn = (memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
-+
-+ /*
-+ * Give all the memory to the bootmap allocator, tell it to put the
-+ * boot mem_map at the start of memory.
-+ */
-+ bootmap_size = init_bootmem_node(
-+ NODE_DATA(0),
-+ memory_start >> PAGE_SHIFT, /* map goes here */
-+ PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
-+ memory_end >> PAGE_SHIFT);
-+ /*
-+ * Free the usable memory, we have to make sure we do not free
-+ * the bootmem bitmap so we then reserve it after freeing it :-)
-+ */
-+ free_bootmem(memory_start, memory_end - memory_start);
-+ reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
-+
-+ /*
-+ * Get kmalloc into gear.
-+ */
-+ paging_init();
-+
-+ /*
-+ * Fix up the thread_info structure, indicate this is a mainline Linux
-+ * thread and setup the sw_ksp().
-+ */
-+ sw_ksp[thread_get_self()] = (unsigned int) current_thread_info();
-+ thread_set_mainline(thread_get_self());
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/signal.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/signal.c
---- linux-2.6.30.10/arch/ubicom32/kernel/signal.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/signal.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,458 @@
-+/*
-+ * arch/ubicom32/kernel/signal.c
-+ * Ubicom32 architecture signal handling implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1991, 1992 Linus Torvalds
-+ * Linux/m68k support by Hamish Macdonald
-+ * 68060 fixes by Jesper Skov
-+ * 1997-12-01 Modified for POSIX.1b signals by Andreas Schwab
-+ * mathemu support by Roman Zippel
-+ * ++roman (07/09/96): implemented signal stacks
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * mathemu support by Roman Zippel
-+ * (Note: fpstate in the signal context is completely ignored for the emulator
-+ * and the internal floating point format is put on stack)
-+ *
-+ * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
-+ * Atari :-) Current limitation: Only one sigstack can be active at one time.
-+ * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
-+ * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
-+ * signal handlers!
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/signal.h>
-+#include <linux/syscalls.h>
-+#include <linux/errno.h>
-+#include <linux/wait.h>
-+#include <linux/ptrace.h>
-+#include <linux/unistd.h>
-+#include <linux/stddef.h>
-+#include <linux/highuid.h>
-+#include <linux/tty.h>
-+#include <linux/personality.h>
-+#include <linux/binfmts.h>
-+
-+#include <asm/setup.h>
-+#include <asm/uaccess.h>
-+#include <asm/pgtable.h>
-+#include <asm/traps.h>
-+#include <asm/ucontext.h>
-+
-+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-+
-+/*
-+ * asm signal return handlers.
-+ */
-+void ret_from_user_signal(void);
-+void ret_from_user_rt_signal(void);
-+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
-+
-+/*
-+ * Common signal suspend implementation
-+ */
-+static int signal_suspend(sigset_t *saveset, struct pt_regs *regs)
-+{
-+ regs->dn[0] = -EINTR;
-+ while (1) {
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule();
-+ if (!do_signal(saveset, regs)) {
-+ continue;
-+ }
-+ /*
-+ * If the current frame type is a signal trampoline we are
-+ * actually going to call the signal handler so we return the
-+ * desired d0 as the return value.
-+ */
-+ if (regs->frame_type == UBICOM32_FRAME_TYPE_SIGTRAMP) {
-+ return regs->dn[0];
-+ }
-+ return -EINTR;
-+ }
-+ /*
-+ * Should never get here
-+ */
-+ BUG();
-+ return 0;
-+}
-+
-+/*
-+ * Atomically swap in the new signal mask, and wait for a signal.
-+ */
-+asmlinkage int do_sigsuspend(struct pt_regs *regs)
-+{
-+ old_sigset_t mask = regs->dn[0];
-+ sigset_t saveset;
-+
-+ mask &= _BLOCKABLE;
-+ spin_lock_irq(¤t->sighand->siglock);
-+ saveset = current->blocked;
-+ siginitset(¤t->blocked, mask);
-+ recalc_sigpending();
-+ spin_unlock_irq(¤t->sighand->siglock);
-+
-+ /*
-+ * Call common handler
-+ */
-+ return signal_suspend(&saveset, regs);
-+}
-+
-+asmlinkage int
-+do_rt_sigsuspend(struct pt_regs *regs)
-+{
-+ sigset_t *unewset = (sigset_t *)regs->dn[0];
-+ size_t sigsetsize = (size_t)regs->dn[1];
-+ sigset_t saveset, newset;
-+
-+ /* XXX: Don't preclude handling different sized sigset_t's. */
-+ if (sigsetsize != sizeof(sigset_t))
-+ return -EINVAL;
-+
-+ if (copy_from_user(&newset, unewset, sizeof(newset)))
-+ return -EFAULT;
-+ sigdelsetmask(&newset, ~_BLOCKABLE);
-+
-+ spin_lock_irq(¤t->sighand->siglock);
-+ saveset = current->blocked;
-+ current->blocked = newset;
-+ recalc_sigpending();
-+ spin_unlock_irq(¤t->sighand->siglock);
-+
-+ /*
-+ * Call common handler
-+ */
-+ return signal_suspend(&saveset, regs);
-+}
-+
-+asmlinkage int
-+sys_sigaction(int sig, const struct old_sigaction *act,
-+ struct old_sigaction *oact)
-+{
-+ struct k_sigaction new_ka, old_ka;
-+ int ret;
-+
-+ if (act) {
-+ old_sigset_t mask;
-+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-+ return -EFAULT;
-+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-+ __get_user(mask, &act->sa_mask);
-+ siginitset(&new_ka.sa.sa_mask, mask);
-+ }
-+
-+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-+
-+ if (!ret && oact) {
-+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-+ return -EFAULT;
-+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-+ }
-+
-+ return ret;
-+}
-+
-+asmlinkage int
-+do_sys_sigaltstack(struct pt_regs *regs)
-+{
-+ const stack_t *uss = (stack_t *) regs->dn[0];
-+ stack_t *uoss = (stack_t *)regs->dn[1];
-+ return do_sigaltstack(uss, uoss, regs->an[7]);
-+}
-+
-+/*
-+ * fdpic_func_descriptor describes sa_handler when the application is FDPIC
-+ */
-+struct fdpic_func_descriptor {
-+ unsigned long text;
-+ unsigned long GOT;
-+};
-+
-+/*
-+ * rt_sigframe is stored on the user stack immediately before (above)
-+ * the signal handlers stack.
-+ */
-+struct rt_sigframe
-+{
-+ unsigned long syscall_number; /* This holds __NR_rt_sigreturn. */
-+ unsigned long restore_all_regs; /* This field gets set to 1 if the frame
-+ * type is TRAP or INTERRUPT. */
-+ siginfo_t *info;
-+ struct ucontext uc;
-+ int sig;
-+ void *pretcode;
-+};
-+
-+/*
-+ * Do a signal return; undo the signal stack.
-+ */
-+asmlinkage int do_sigreturn(unsigned long __unused)
-+{
-+ BUG();
-+ return 0;
-+}
-+
-+asmlinkage int do_rt_sigreturn(struct pt_regs *regs)
-+{
-+ unsigned long usp = regs->an[7];
-+ struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
-+ sigset_t set;
-+
-+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-+ goto badframe;
-+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-+ goto badframe;
-+
-+ sigdelsetmask(&set, ~_BLOCKABLE);
-+ spin_lock_irq(¤t->sighand->siglock);
-+ current->blocked = set;
-+ recalc_sigpending();
-+ spin_unlock_irq(¤t->sighand->siglock);
-+
-+ if (copy_from_user(regs, &frame->uc.uc_mcontext, sizeof(struct pt_regs)))
-+ goto badframe;
-+ return regs->dn[0];
-+
-+badframe:
-+ force_sig(SIGSEGV, current);
-+ return 0;
-+}
-+
-+static inline void *
-+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-+{
-+ unsigned long usp;
-+
-+ /* Default to using normal stack. */
-+ usp = regs->an[7];
-+
-+ /* This is the X/Open sanctioned signal stack switching. */
-+ if (ka->sa.sa_flags & SA_ONSTACK) {
-+ if (!sas_ss_flags(usp))
-+ usp = current->sas_ss_sp + current->sas_ss_size;
-+ }
-+ return (void *)((usp - frame_size) & ~0x3);
-+}
-+
-+/*
-+ * signal_trampoline: Defined in ubicom32_syscall.S
-+ */
-+asmlinkage void signal_trampoline(void)__attribute__((naked));
-+
-+static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
-+ sigset_t *set, struct pt_regs *regs)
-+{
-+ struct rt_sigframe *frame;
-+ int err = 0;
-+
-+ frame = (struct rt_sigframe *) get_sigframe(ka, regs, sizeof(*frame));
-+
-+ /*
-+ * The 'err |=' have been may criticized as bad code style, but I
-+ * strongly suspect that we want this code to be fast. So for
-+ * now it stays as is.
-+ */
-+ err |= __put_user( ( (current_thread_info()->exec_domain)
-+ && (current_thread_info()->exec_domain->signal_invmap)
-+ && (sig < 32) )
-+ ? current_thread_info()->exec_domain->signal_invmap[sig]
-+ : sig, &frame->sig);
-+ err |= __put_user(info, &frame->info);
-+
-+ /* Create the ucontext. */
-+ err |= __put_user(0, &frame->uc.uc_flags);
-+ err |= __put_user(0, &frame->uc.uc_link);
-+ err |= __put_user((void *)current->sas_ss_sp,
-+ &frame->uc.uc_stack.ss_sp);
-+ err |= __put_user(sas_ss_flags(regs->an[7]),
-+ &frame->uc.uc_stack.ss_flags);
-+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-+ err |= __put_user(__NR_rt_sigreturn, &frame->syscall_number);
-+ if ((regs->frame_type == UBICOM32_FRAME_TYPE_TRAP) ||
-+ (regs->frame_type == UBICOM32_FRAME_TYPE_INTERRUPT)) {
-+ err |= __put_user(1, &frame->restore_all_regs);
-+ } else {
-+ err |= __put_user(0, &frame->restore_all_regs);
-+ }
-+ err |= copy_to_user (&frame->uc.uc_mcontext.sc_regs, regs, sizeof(struct pt_regs));
-+ err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
-+
-+ if (err)
-+ goto give_sigsegv;
-+
-+ /*
-+ * Set up registers for signal handler NOTE: Do not modify dn[14], it
-+ * contains the userspace tls pointer, so it important that it carries
-+ * over to the signal handler.
-+ */
-+ regs->an[7] = (unsigned long)frame;
-+ regs->pc = (unsigned long) signal_trampoline;
-+ regs->an[5] = (unsigned long) signal_trampoline;
-+ regs->dn[0] = sig;
-+ regs->dn[1] = (unsigned long) frame->info;
-+ regs->dn[2] = (unsigned int) &frame->uc;
-+
-+ /*
-+ * If this is FDPIC then the signal handler is actually a function
-+ * descriptor.
-+ */
-+ if (current->personality & FDPIC_FUNCPTRS) {
-+ struct fdpic_func_descriptor __user *funcptr =
-+ (struct fdpic_func_descriptor *) ka->sa.sa_handler;
-+ err |= __get_user(regs->dn[3], &funcptr->text);
-+ err |= __get_user(regs->an[0], &funcptr->GOT);
-+ if (err)
-+ goto give_sigsegv;
-+
-+ /*
-+ * The funcdesc must be in a3 as this is required for the lazy
-+ * resolver in ld.so, if the application is not FDPIC a3 is not
-+ * used.
-+ */
-+ regs->an[3] = (unsigned long) funcptr;
-+
-+ } else {
-+ regs->dn[3] = (unsigned long)ka->sa.sa_handler;
-+ regs->an[0] = 0;
-+ }
-+
-+ regs->frame_type = UBICOM32_FRAME_TYPE_SIGTRAMP;
-+
-+ return;
-+
-+give_sigsegv:
-+ /* user space exception */
-+ force_sigsegv(sig, current);
-+}
-+
-+static inline void
-+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-+{
-+ switch (regs->dn[0]) {
-+ case -ERESTARTNOHAND:
-+ if (!has_handler)
-+ goto do_restart;
-+ regs->dn[0] = -EINTR;
-+ break;
-+
-+ case -ERESTARTSYS:
-+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
-+ regs->dn[0] = -EINTR;
-+ break;
-+ }
-+ /* fallthrough */
-+ case -ERESTARTNOINTR:
-+ do_restart:
-+ regs->dn[0] = regs->original_dn_0;
-+ regs->pc -= 8;
-+ regs->an[5] -= 8;
-+ break;
-+ }
-+}
-+
-+/*
-+ * OK, we're invoking a handler
-+ */
-+static void
-+handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-+ sigset_t *oldset, struct pt_regs *regs)
-+{
-+ /* are we from a system call? */
-+ if (regs->frame_type == -1)
-+ /* If so, check system call restarting.. */
-+ handle_restart(regs, ka, 1);
-+
-+ /* set up the stack frame */
-+ setup_rt_frame(sig, ka, info, oldset, regs);
-+
-+ if (ka->sa.sa_flags & SA_ONESHOT)
-+ ka->sa.sa_handler = SIG_DFL;
-+
-+ spin_lock_irq(¤t->sighand->siglock);
-+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
-+ if (!(ka->sa.sa_flags & SA_NODEFER))
-+ sigaddset(¤t->blocked,sig);
-+ recalc_sigpending();
-+ spin_unlock_irq(¤t->sighand->siglock);
-+}
-+
-+/*
-+ * Note that 'init' is a special process: it doesn't get signals it doesn't
-+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
-+ * mistake.
-+ */
-+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
-+{
-+ struct k_sigaction ka;
-+ siginfo_t info;
-+ int signr;
-+
-+ /*
-+ * We want the common case to go fast, which
-+ * is why we may in certain cases get here from
-+ * kernel mode. Just return without doing anything
-+ * if so.
-+ */
-+ if (!user_mode(regs))
-+ return 1;
-+
-+ if (!oldset)
-+ oldset = ¤t->blocked;
-+
-+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-+ if (signr > 0) {
-+ /* Whee! Actually deliver the signal. */
-+ handle_signal(signr, &ka, &info, oldset, regs);
-+ return 1;
-+ }
-+
-+ /* Did we come from a system call? */
-+ if (regs->frame_type == -1) {
-+ /* Restart the system call - no handlers present */
-+ handle_restart(regs, NULL, 0);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * sys_sigreturn()
-+ * Return handler for signal clean-up.
-+ *
-+ * NOTE: Ubicom32 does not use this syscall. Instead we rely
-+ * on do_rt_sigreturn().
-+ */
-+asmlinkage long sys_sigreturn(void)
-+{
-+ return -ENOSYS;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/smp.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/smp.c
---- linux-2.6.30.10/arch/ubicom32/kernel/smp.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/smp.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,806 @@
-+/*
-+ * arch/ubicom32/kernel/smp.c
-+ * SMP implementation for Ubicom32 processors.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
-+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
-+ * Copyright (C) 2001,2004 Grant Grundler <grundler@parisc-linux.org>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/bootmem.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/smp.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/mm.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/cpu.h>
-+#include <linux/profile.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/ptrace.h>
-+#include <linux/unistd.h>
-+#include <linux/irq.h>
-+
-+#include <asm/system.h>
-+#include <asm/atomic.h>
-+#include <asm/current.h>
-+#include <asm/tlbflush.h>
-+#include <asm/timex.h>
-+#include <asm/cpu.h>
-+#include <asm/irq.h>
-+#include <asm/processor.h>
-+#include <asm/thread.h>
-+#include <asm/sections.h>
-+#include <asm/ip5000.h>
-+
-+/*
-+ * Mask the debug printout for IPI because they are too verbose
-+ * for regular debugging.
-+ */
-+
-+// #define DEBUG_SMP 1
-+#if !defined(DEBUG_SMP)
-+#define smp_debug(lvl, ...)
-+#else
-+static unsigned int smp_debug_lvl = 50;
-+#define smp_debug(lvl, printargs...) \
-+ if (lvl >= smp_debug_lvl) { \
-+ printk(printargs); \
-+ }
-+#endif
-+
-+#if !defined(DEBUG_SMP)
-+#define DEBUG_ASSERT(cond)
-+#else
-+#define DEBUG_ASSERT(cond) \
-+ if (!(cond)) { \
-+ THREAD_STALL; \
-+ }
-+#endif
-+
-+/*
-+ * List of IPI Commands (more than one can be set at a time).
-+ */
-+enum ipi_message_type {
-+ IPI_NOP,
-+ IPI_RESCHEDULE,
-+ IPI_CALL_FUNC,
-+ IPI_CALL_FUNC_SINGLE,
-+ IPI_CPU_STOP,
-+ IPI_CPU_TIMER,
-+};
-+
-+/*
-+ * We maintain a hardware thread oriented view of online threads
-+ * and those involved or needing IPI.
-+ */
-+static volatile unsigned long smp_online_threads = 0;
-+static volatile unsigned long smp_needs_ipi = 0;
-+static volatile unsigned long smp_inside_ipi = 0;
-+static unsigned long smp_irq_affinity[NR_IRQS];
-+
-+/*
-+ * What do we need to track on a per cpu/thread basis?
-+ */
-+DEFINE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
-+
-+/*
-+ * Each thread cpuinfo IPI information is guarded by a lock
-+ * that is kept local to this file.
-+ */
-+DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED;
-+
-+/*
-+ * The IPI(s) are based on a software IRQ through the LDSR.
-+ */
-+unsigned int smp_ipi_irq;
-+
-+/*
-+ * Define a spinlock so that only one cpu is able to modify the
-+ * smp_needs_ipi and to set/clear the IRQ at a time.
-+ */
-+DEFINE_SPINLOCK(smp_ipi_lock);
-+
-+/*
-+ * smp_halt_processor()
-+ * Halt this hardware thread.
-+ */
-+static void smp_halt_processor(void)
-+{
-+ int cpuid = thread_get_self();
-+ cpu_clear(smp_processor_id(), cpu_online_map);
-+ local_irq_disable();
-+ printk(KERN_EMERG "cpu[%d] has halted. It is not OK to turn off power \
-+ until all cpu's are off.\n", cpuid);
-+ for (;;) {
-+ thread_suspend();
-+ }
-+}
-+
-+/*
-+ * ipi_interrupt()
-+ * Handle an Interprocessor Interrupt.
-+ */
-+static irqreturn_t ipi_interrupt(int irq, void *dev_id)
-+{
-+ int cpuid = smp_processor_id();
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
-+ unsigned long ops;
-+
-+ /*
-+ * Count this now; we may make a call that never returns.
-+ */
-+ p->ipi_count++;
-+
-+ /*
-+ * We are about to process all ops. If another cpu has stated
-+ * that we need an IPI, we will have already processed it. By
-+ * clearing our smp_needs_ipi, and processing all ops,
-+ * we reduce the number of IPI interrupts. However, this introduces
-+ * the possibility that smp_needs_ipi will be clear and the soft irq
-+ * will have gone off; so we need to make the get_affinity() path
-+ * tolerant of spurious interrupts.
-+ */
-+ spin_lock(&smp_ipi_lock);
-+ smp_needs_ipi &= ~(1 << p->tid);
-+ spin_unlock(&smp_ipi_lock);
-+
-+ for (;;) {
-+ /*
-+ * Read the set of IPI commands we should handle.
-+ */
-+ spinlock_t *lock = &per_cpu(ipi_lock, cpuid);
-+ spin_lock(lock);
-+ ops = p->ipi_pending;
-+ p->ipi_pending = 0;
-+ spin_unlock(lock);
-+
-+ /*
-+ * If we have no IPI commands to execute, break out.
-+ */
-+ if (!ops) {
-+ break;
-+ }
-+
-+ /*
-+ * Execute the set of commands in the ops word, one command
-+ * at a time in no particular order. Strip of each command
-+ * as we execute it.
-+ */
-+ while (ops) {
-+ unsigned long which = ffz(~ops);
-+ ops &= ~(1 << which);
-+
-+ BUG_ON(!irqs_disabled());
-+ switch (which) {
-+ case IPI_NOP:
-+ smp_debug(100, KERN_INFO "cpu[%d]: "
-+ "IPI_NOP\n", cpuid);
-+ break;
-+
-+ case IPI_RESCHEDULE:
-+ /*
-+ * Reschedule callback. Everything to be
-+ * done is done by the interrupt return path.
-+ */
-+ smp_debug(200, KERN_INFO "cpu[%d]: "
-+ "IPI_RESCHEDULE\n", cpuid);
-+ break;
-+
-+ case IPI_CALL_FUNC:
-+ smp_debug(100, KERN_INFO "cpu[%d]: "
-+ "IPI_CALL_FUNC\n", cpuid);
-+ generic_smp_call_function_interrupt();
-+ break;
-+
-+ case IPI_CALL_FUNC_SINGLE:
-+ smp_debug(100, KERN_INFO "cpu[%d]: "
-+ "IPI_CALL_FUNC_SINGLE\n", cpuid);
-+ generic_smp_call_function_single_interrupt();
-+ break;
-+
-+ case IPI_CPU_STOP:
-+ smp_debug(100, KERN_INFO "cpu[%d]: "
-+ "IPI_CPU_STOP\n", cpuid);
-+ smp_halt_processor();
-+ break;
-+
-+#if !defined(CONFIG_LOCAL_TIMERS)
-+ case IPI_CPU_TIMER:
-+ smp_debug(100, KERN_INFO "cpu[%d]: "
-+ "IPI_CPU_TIMER\n", cpuid);
-+#if defined(CONFIG_GENERIC_CLOCKEVENTS)
-+ local_timer_interrupt();
-+#else
-+ update_process_times(user_mode(get_irq_regs()));
-+ profile_tick(CPU_PROFILING);
-+#endif
-+#endif
-+ break;
-+
-+ default:
-+ printk(KERN_CRIT "cpu[%d]: "
-+ "Unknown IPI: %lu\n", cpuid, which);
-+
-+ return IRQ_NONE;
-+ }
-+
-+ /*
-+ * Let in any pending interrupts
-+ */
-+ BUG_ON(!irqs_disabled());
-+ local_irq_enable();
-+ local_irq_disable();
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * ipi_send()
-+ * Send an Interprocessor Interrupt.
-+ */
-+static void ipi_send(int cpu, enum ipi_message_type op)
-+{
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu);
-+ spinlock_t *lock = &per_cpu(ipi_lock, cpu);
-+ unsigned long flags;
-+
-+ /*
-+ * We protect the setting of the ipi_pending field and ensure
-+ * that the ipi delivery mechanism and interrupt are atomically
-+ * handled.
-+ */
-+ spin_lock_irqsave(lock, flags);
-+ p->ipi_pending |= 1 << op;
-+ spin_unlock_irqrestore(lock, flags);
-+
-+ spin_lock_irqsave(&smp_ipi_lock, flags);
-+ smp_needs_ipi |= (1 << p->tid);
-+ ubicom32_set_interrupt(smp_ipi_irq);
-+ spin_unlock_irqrestore(&smp_ipi_lock, flags);
-+ smp_debug(100, KERN_INFO "cpu[%d]: send: %d\n", cpu, op);
-+}
-+
-+/*
-+ * ipi_send_mask
-+ * Send an IPI to each cpu in mask.
-+ */
-+static inline void ipi_send_mask(unsigned int op, const struct cpumask mask)
-+{
-+ int cpu;
-+ for_each_cpu_mask(cpu, mask) {
-+ ipi_send(cpu, op);
-+ }
-+}
-+
-+/*
-+ * ipi_send_allbutself()
-+ * Send an IPI to all threads but ourselves.
-+ */
-+static inline void ipi_send_allbutself(unsigned int op)
-+{
-+ int self = smp_processor_id();
-+ struct cpumask result;
-+ cpumask_copy(&result, &cpu_online_map);
-+ cpu_clear(self, result);
-+ ipi_send_mask(op, result);
-+}
-+
-+/*
-+ * smp_enable_vector()
-+ */
-+static void smp_enable_vector(unsigned int irq)
-+{
-+ ubicom32_clear_interrupt(smp_ipi_irq);
-+ ldsr_enable_vector(irq);
-+}
-+
-+/*
-+ * smp_disable_vector()
-+ * Disable the interrupt by clearing the appropriate bit in the
-+ * LDSR Mask Register.
-+ */
-+static void smp_disable_vector(unsigned int irq)
-+{
-+ ldsr_disable_vector(irq);
-+}
-+
-+/*
-+ * smp_mask_vector()
-+ */
-+static void smp_mask_vector(unsigned int irq)
-+{
-+ ldsr_mask_vector(irq);
-+}
-+
-+/*
-+ * smp_unmask_vector()
-+ */
-+static void smp_unmask_vector(unsigned int irq)
-+{
-+ ldsr_unmask_vector(irq);
-+}
-+
-+/*
-+ * smp_end_vector()
-+ * Called once an interrupt is completed (reset the LDSR mask).
-+ */
-+static void smp_end_vector(unsigned int irq)
-+{
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, smp_processor_id());
-+ spin_lock(&smp_ipi_lock);
-+ smp_inside_ipi &= ~(1 << p->tid);
-+ if (smp_inside_ipi) {
-+ spin_unlock(&smp_ipi_lock);
-+ return;
-+ }
-+ spin_unlock(&smp_ipi_lock);
-+ ldsr_unmask_vector(irq);
-+ smp_debug(100, KERN_INFO "cpu[%d]: unamesk vector\n", smp_processor_id());
-+}
-+
-+/*
-+ * Special hanlder functions for SMP.
-+ */
-+static struct irq_chip ubicom32_smp_chip = {
-+ .name = "UbicoIPI",
-+ .startup = NULL,
-+ .shutdown = NULL,
-+ .enable = smp_enable_vector,
-+ .disable = smp_disable_vector,
-+ .ack = NULL,
-+ .mask = smp_mask_vector,
-+ .unmask = smp_unmask_vector,
-+ .end = smp_end_vector,
-+};
-+
-+/*
-+ * smp_reset_ipi()
-+ * None of these cpu(s) got their IPI, turn it back on.
-+ *
-+ * Note: This is called by the LDSR which is not a full
-+ * Linux cpu. Thus you must use the raw form of locks
-+ * because lock debugging will not work on the partial
-+ * cpu nature of the LDSR.
-+ */
-+void smp_reset_ipi(unsigned long mask)
-+{
-+ __raw_spin_lock(&smp_ipi_lock.raw_lock);
-+ smp_needs_ipi |= mask;
-+ smp_inside_ipi &= ~mask;
-+ ubicom32_set_interrupt(smp_ipi_irq);
-+ __raw_spin_unlock(&smp_ipi_lock.raw_lock);
-+ smp_debug(100, KERN_INFO "smp: reset IPIs for: 0x%x\n", mask);
-+}
-+
-+/*
-+ * smp_get_affinity()
-+ * Choose the thread affinity for this interrupt.
-+ *
-+ * Note: This is called by the LDSR which is not a full
-+ * Linux cpu. Thus you must use the raw form of locks
-+ * because lock debugging will not work on the partial
-+ * cpu nature of the LDSR.
-+ */
-+unsigned long smp_get_affinity(unsigned int irq, int *all)
-+{
-+ unsigned long mask = 0;
-+
-+ /*
-+ * Most IRQ(s) are delivered in a round robin fashion.
-+ */
-+ if (irq != smp_ipi_irq) {
-+ unsigned long result = smp_irq_affinity[irq] & smp_online_threads;
-+ DEBUG_ASSERT(result);
-+ *all = 0;
-+ return result;
-+ }
-+
-+ /*
-+ * This is an IPI request. Return all cpu(s) scheduled for an IPI.
-+ * We also track those cpu(s) that are going to be "receiving" IPI this
-+ * round. When all CPU(s) have called smp_end_vector(),
-+ * we will unmask the IPI interrupt.
-+ */
-+ __raw_spin_lock(&smp_ipi_lock.raw_lock);
-+ ubicom32_clear_interrupt(smp_ipi_irq);
-+ if (smp_needs_ipi) {
-+ mask = smp_needs_ipi;
-+ smp_inside_ipi |= smp_needs_ipi;
-+ smp_needs_ipi = 0;
-+ }
-+ __raw_spin_unlock(&smp_ipi_lock.raw_lock);
-+ *all = 1;
-+ return mask;
-+}
-+
-+/*
-+ * smp_set_affinity()
-+ * Set the affinity for this irq but store the value in tid(s).
-+ */
-+void smp_set_affinity(unsigned int irq, const struct cpumask *dest)
-+{
-+ int cpuid;
-+ unsigned long *paffinity = &smp_irq_affinity[irq];
-+
-+ /*
-+ * If none specified, all cpus are allowed.
-+ */
-+ if (cpus_empty(*dest)) {
-+ *paffinity = 0xffffffff;
-+ return;
-+ }
-+
-+ /*
-+ * Make sure to clear the old value before setting up the
-+ * list.
-+ */
-+ *paffinity = 0;
-+ for_each_cpu_mask(cpuid, *dest) {
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
-+ *paffinity |= (1 << p->tid);
-+ }
-+}
-+
-+/*
-+ * smp_send_stop()
-+ * Send a stop request to all CPU but this one.
-+ */
-+void smp_send_stop(void)
-+{
-+ ipi_send_allbutself(IPI_CPU_STOP);
-+}
-+
-+/*
-+ * smp_send_timer_all()
-+ * Send all cpu(s) but this one, a request to update times.
-+ */
-+void smp_send_timer_all(void)
-+{
-+ ipi_send_allbutself(IPI_CPU_TIMER);
-+}
-+
-+/*
-+ * smp_timer_broadcast()
-+ * Use an IPI to broadcast a timer message
-+ */
-+void smp_timer_broadcast(const struct cpumask *mask)
-+{
-+ ipi_send_mask(IPI_CPU_TIMER, *mask);
-+}
-+
-+/*
-+ * smp_send_reschedule()
-+ * Send a reschedule request to the specified cpu.
-+ */
-+void smp_send_reschedule(int cpu)
-+{
-+ ipi_send(cpu, IPI_RESCHEDULE);
-+}
-+
-+/*
-+ * arch_send_call_function_ipi()
-+ * Cause each cpu in the mask to call the generic function handler.
-+ */
-+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-+{
-+ int cpu;
-+ for_each_cpu_mask(cpu, *mask) {
-+ ipi_send(cpu, IPI_CALL_FUNC);
-+ }
-+}
-+
-+/*
-+ * arch_send_call_function_single_ipi()
-+ * Cause the specified cpu to call the generic function handler.
-+ */
-+void arch_send_call_function_single_ipi(int cpu)
-+{
-+ ipi_send(cpu, IPI_CALL_FUNC_SINGLE);
-+}
-+
-+/*
-+ * setup_profiling_timer()
-+ * Dummy function created to keep Oprofile happy in the SMP case.
-+ */
-+int setup_profiling_timer(unsigned int multiplier)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * smp_mainline_start()
-+ * Start a slave thread executing a mainline Linux context.
-+ */
-+static void __init smp_mainline_start(void *arg)
-+{
-+ int cpuid = smp_processor_id();
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
-+
-+ BUG_ON(p->tid != thread_get_self());
-+
-+ /*
-+ * Well, support 2.4 linux scheme as well.
-+ */
-+ if (cpu_test_and_set(cpuid, cpu_online_map)) {
-+ printk(KERN_CRIT "cpu[%d]: already initialized!\n", cpuid);
-+ smp_halt_processor();
-+ return;
-+ }
-+
-+ /*
-+ * Initialise the idle task for this CPU
-+ */
-+ atomic_inc(&init_mm.mm_count);
-+ current->active_mm = &init_mm;
-+ if (current->mm) {
-+ printk(KERN_CRIT "cpu[%d]: idle task already has memory "
-+ "management\n", cpuid);
-+ smp_halt_processor();
-+ return;
-+ }
-+
-+ /*
-+ * TODO: X86 does this prior to calling notify, try to understand why?
-+ */
-+ preempt_disable();
-+
-+#if defined(CONFIG_GENERIC_CLOCKEVENTS)
-+ /*
-+ * Setup a local timer event so that this cpu will get timer interrupts
-+ */
-+ if (local_timer_setup(cpuid) == -1) {
-+ printk(KERN_CRIT "cpu[%d]: timer alloc failed\n", cpuid);
-+ smp_halt_processor();
-+ return;
-+ }
-+#endif
-+
-+ /*
-+ * Notify those interested that we are up and alive. This must
-+ * be done before interrupts are enabled. It must also be completed
-+ * before the bootstrap cpu returns from __cpu_up() (see comment
-+ * above cpu_set() of the cpu_online_map).
-+ */
-+ notify_cpu_starting(cpuid);
-+
-+ /*
-+ * Indicate that this thread is now online and present. Setting
-+ * cpu_online_map has the side effect of allowing the bootstrap
-+ * cpu to continue along; so anything that MUST be done prior to the
-+ * bootstrap cpu returning from __cpu_up() needs to go above here.
-+ */
-+ cpu_set(cpuid, cpu_online_map);
-+ cpu_set(cpuid, cpu_present_map);
-+
-+ /*
-+ * Maintain a thread mapping in addition to the cpu mapping.
-+ */
-+ smp_online_threads |= (1 << p->tid);
-+
-+ /*
-+ * Enable interrupts for this thread.
-+ */
-+ local_irq_enable();
-+
-+ /*
-+ * Enter the idle loop and wait for a timer to schedule some work.
-+ */
-+ printk(KERN_INFO "cpu[%d]: entering cpu_idle()\n", cpuid);
-+ cpu_idle();
-+
-+ /* Not Reached */
-+}
-+
-+/*
-+ * smp_cpus_done()
-+ * Called once the kernel_init() has brought up all cpu(s).
-+ */
-+void smp_cpus_done(unsigned int cpu_max)
-+{
-+ /* Do Nothing */
-+}
-+
-+/*
-+ * __cpu_up()
-+ * Called to startup a sepcific cpu.
-+ */
-+int __cpuinit __cpu_up(unsigned int cpu)
-+{
-+ struct task_struct *idle;
-+ unsigned int *stack;
-+ long timeout;
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu);
-+
-+ /*
-+ * Create an idle task for this CPU.
-+ */
-+ idle = fork_idle(cpu);
-+ if (IS_ERR(idle)) {
-+ panic("cpu[%d]: fork failed\n", cpu);
-+ return -ENOSYS;
-+ }
-+ task_thread_info(idle)->cpu = cpu;
-+
-+ /*
-+ * Setup the sw_ksp[] to point to this new task.
-+ */
-+ sw_ksp[p->tid] = (unsigned int)idle->stack;
-+ stack = (unsigned int *)(sw_ksp[p->tid] + PAGE_SIZE - 8);
-+
-+ /*
-+ * Cause the specified thread to execute our smp_mainline_start
-+ * function as a TYPE_NORMAL thread.
-+ */
-+ printk(KERN_INFO "cpu[%d]: launching mainline Linux thread\n", cpu);
-+ if (thread_start(p->tid, smp_mainline_start, (void *)NULL, stack,
-+ THREAD_TYPE_NORMAL) == -1) {
-+ printk(KERN_WARNING "cpu[%d]: failed thread_start\n", cpu);
-+ return -ENOSYS;
-+ }
-+
-+ /*
-+ * Wait for the thread to start up. The thread will set
-+ * the online bit when it is running. Our caller execpts the
-+ * cpu to be online if we return 0.
-+ */
-+ for (timeout = 0; timeout < 10000; timeout++) {
-+ if (cpu_online(cpu)) {
-+ break;
-+ }
-+
-+ udelay(100);
-+ barrier();
-+ continue;
-+ }
-+
-+ if (!cpu_online(cpu)) {
-+ printk(KERN_CRIT "cpu[%d]: failed to live after %ld us\n",
-+ cpu, timeout * 100);
-+ return -ENOSYS;
-+ }
-+
-+ printk(KERN_INFO "cpu[%d]: came alive after %ld us\n",
-+ cpu, timeout * 100);
-+ return 0;
-+}
-+
-+/*
-+ * Data used by setup_irq for the IPI.
-+ */
-+static struct irqaction ipi_irq = {
-+ .name = "ipi",
-+ .flags = IRQF_DISABLED | IRQF_PERCPU,
-+ .handler = ipi_interrupt,
-+};
-+
-+/*
-+ * smp_prepare_cpus()
-+ * Mark threads that are available to Linux as possible cpus(s).
-+ */
-+void __init smp_prepare_cpus(unsigned int max_cpus)
-+{
-+ int i;
-+
-+ /*
-+ * We will need a software IRQ to send IPI(s). We will use
-+ * a single software IRQ for all IPI(s).
-+ */
-+ if (irq_soft_alloc(&smp_ipi_irq) < 0) {
-+ panic("no software IRQ is available\n");
-+ return;
-+ }
-+
-+ /*
-+ * For the IPI interrupt, we want to use our own chip definition.
-+ * This allows us to define what happens in SMP IPI without affecting
-+ * the performance of the other interrupts.
-+ *
-+ * Next, Register the IPI interrupt function against the soft IRQ.
-+ */
-+ set_irq_chip(smp_ipi_irq, &ubicom32_smp_chip);
-+ setup_irq(smp_ipi_irq, &ipi_irq);
-+
-+ /*
-+ * We use the device tree node to determine how many
-+ * free cpus we will have (up to NR_CPUS) and we indicate
-+ * that those cpus are present.
-+ *
-+ * We need to do this very early in the SMP case
-+ * because the Linux init code uses the cpu_present_map.
-+ */
-+ for_each_possible_cpu(i) {
-+ thread_t tid;
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, i);
-+
-+ /*
-+ * Skip the bootstrap cpu
-+ */
-+ if (i == 0) {
-+ continue;
-+ }
-+
-+ /*
-+ * If we have a free thread left in the mask,
-+ * indicate that the cpu is present.
-+ */
-+ tid = thread_alloc();
-+ if (tid == (thread_t)-1) {
-+ break;
-+ }
-+
-+ /*
-+ * Save the hardware thread id for this cpu.
-+ */
-+ p->tid = tid;
-+ cpu_set(i, cpu_present_map);
-+ printk(KERN_INFO "cpu[%d]: added to cpu_present_map - tid: %d\n", i, tid);
-+ }
-+}
-+
-+/*
-+ * smp_prepare_boot_cpu()
-+ * Copy the per_cpu data into the appropriate spot for the bootstrap cpu.
-+ *
-+ * The code in boot_cpu_init() has already set the boot cpu's
-+ * state in the possible, present, and online maps.
-+ */
-+void __devinit smp_prepare_boot_cpu(void)
-+{
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0);
-+
-+ smp_online_threads |= (1 << p->tid);
-+ printk(KERN_INFO "cpu[%d]: bootstrap CPU online - tid: %ld\n",
-+ current_thread_info()->cpu, p->tid);
-+}
-+
-+/*
-+ * smp_setup_processor_id()
-+ * Set the current_thread_info() structure cpu value.
-+ *
-+ * We set the value to the true hardware thread value that we are running on.
-+ * NOTE: this function overrides the weak alias function in main.c
-+ */
-+void __init smp_setup_processor_id(void)
-+{
-+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0);
-+ int i;
-+ for_each_cpu_mask(i, CPU_MASK_ALL)
-+ set_cpu_possible(i, true);
-+
-+ current_thread_info()->cpu = 0;
-+ p->tid = thread_get_self();
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/stacktrace.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/stacktrace.c
---- linux-2.6.30.10/arch/ubicom32/kernel/stacktrace.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/stacktrace.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,244 @@
-+/*
-+ * arch/ubicom32/kernel/stacktrace.c
-+ * Ubicom32 architecture stack back trace implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/sched.h>
-+#include <linux/stacktrace.h>
-+#include <linux/module.h>
-+#include <asm/stacktrace.h>
-+#include <asm/thread.h>
-+#include <asm/ip5000.h>
-+
-+/*
-+ * These symbols are filled in by the linker.
-+ */
-+extern unsigned long _stext;
-+extern unsigned long _etext;
-+
-+extern unsigned long __ocm_text_run_begin;
-+extern unsigned long __data_begin;
-+
-+/*
-+ * stacktrace_iterate()
-+ * Walk the stack looking for call and calli instructions on an aligned
-+ * boundary.
-+ *
-+ * Trace must point to the top of the current stack frame.
-+ */
-+unsigned long stacktrace_iterate(unsigned long **trace,
-+ unsigned long stext,
-+ unsigned long etext,
-+ unsigned long ocm_stext,
-+ unsigned long ocm_etext,
-+ unsigned long sstack,
-+ unsigned long estack)
-+{
-+ unsigned int thread_trap_en, instruction;
-+ unsigned long address;
-+ unsigned int limit = 0;
-+ unsigned long result = 0;
-+ unsigned long *sp = *trace;
-+
-+ /*
-+ * Exclude the current thread from being monitored for traps.
-+ */
-+ asm volatile(
-+ " thread_get_self_mask d15 \n\t"
-+ /* save current trap status */
-+ " and.4 %0, MT_TRAP_EN, d15 \n\t"
-+ " not.4 d15, d15 \n\t"
-+ /* disable trap */
-+ " and.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t"
-+ " pipe_flush 0 \n\t"
-+ : "=r" (thread_trap_en)
-+ :
-+ : "d15", "cc"
-+ );
-+
-+ while (limit++ < 256) {
-+ /*
-+ * See if we have a valid stack.
-+ */
-+ if (!between((unsigned long)sp, sstack, estack)) {
-+#ifdef TRAP_DEBUG_STACK_TRACE
-+ printk(KERN_EMERG "stack address is out of range - "
-+ "sp: %x, sstack: %x, estack: %x\n",
-+ (unsigned int)sp, (unsigned int)sstack,
-+ (unsigned int)estack);
-+#endif
-+ result = 0;
-+ *trace = 0;
-+ break;
-+ }
-+
-+ /*
-+ * Get the value off the stack and back up 4 bytes to what
-+ * should be the address of a call or calli.
-+ */
-+ address = (*sp++) - 4;
-+
-+ /*
-+ * If the address is not within the text segment, skip this
-+ * value.
-+ */
-+ if (!between(address, stext, etext) &&
-+ !between(address, ocm_stext, ocm_etext)) {
-+#ifdef TRAP_DEBUG_STACK_TRACE
-+ printk(KERN_EMERG "not a text address - "
-+ "address: %08x, stext: %08x, etext: %08x\n"
-+ "ocm_stext: %08x, ocm_etext: %08x\n",
-+ (unsigned int)address,
-+ (unsigned int)stext,
-+ (unsigned int)etext,
-+ (unsigned int)ocm_stext,
-+ (unsigned int)ocm_etext);
-+#endif
-+ continue;
-+
-+ }
-+
-+ /*
-+ * If the address is not on an aligned boundary it can not be a
-+ * return address.
-+ */
-+ if (address & 0x3) {
-+ continue;
-+ }
-+
-+ /*
-+ * Read the probable instruction.
-+ */
-+ instruction = *(unsigned int *)address;
-+
-+ /*
-+ * Is this a call instruction?
-+ */
-+ if ((instruction & 0xF8000000) == (u32_t)(0x1B << 27)) {
-+#ifdef TRAP_DEBUG_STACK_TRACE
-+ printk(KERN_EMERG "call inst. result: %x, "
-+ "test: %x\n", (unsigned int)address,
-+ (unsigned int)instruction);
-+#endif
-+ *trace = sp;
-+ result = address;
-+ break;
-+ }
-+
-+ /*
-+ * Is this a calli instruction?
-+ */
-+ if ((instruction & 0xF8000000) == (u32_t)(0x1E << 27)) {
-+#ifdef TRAP_DEBUG_STACK_TRACE
-+ printk(KERN_EMERG "calli inst. result: %x, "
-+ "test: %x\n", (unsigned int)address,
-+ (unsigned int)instruction);
-+#endif
-+ *trace = sp;
-+ result = address;
-+ break;
-+ }
-+ }
-+
-+ /*
-+ * Restore the current thread to be monitored for traps.
-+ */
-+ if (thread_trap_en) {
-+ asm volatile(
-+ " thread_get_self_mask d15 \n\t"
-+ " or.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t"
-+ :
-+ :
-+ : "d15", "cc"
-+ );
-+ }
-+ return result;
-+}
-+
-+#ifdef CONFIG_STACKTRACE
-+/*
-+ * stacktrace_save_entries()
-+ * Save stack back trace information into the provided trace structure.
-+ */
-+void stacktrace_save_entries(struct task_struct *tsk,
-+ struct stack_trace *trace,
-+ unsigned long sp)
-+{
-+ unsigned long code_start = (unsigned long)&_stext;
-+ unsigned long code_end = (unsigned long)&_etext;
-+ unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin;
-+ unsigned long ocm_code_end = (unsigned long)&__data_begin;
-+ unsigned long stack_end = (unsigned long)(tsk->stack + THREAD_SIZE - 8);
-+ unsigned long stack = (unsigned long)sp;
-+ unsigned int idx = 0;
-+ unsigned long *handle;
-+ int skip = trace->skip;
-+
-+ handle = (unsigned long *)stack;
-+ while (idx < trace->max_entries) {
-+ if (skip) {
-+ skip--;
-+ continue;
-+ }
-+ trace->entries[idx] = stacktrace_iterate(&handle,
-+ code_start, code_end,
-+ ocm_code_start, ocm_code_end,
-+ (unsigned long)stack, stack_end);
-+ if (trace->entries[idx] == 0) {
-+ break;
-+ }
-+ idx++;
-+ }
-+}
-+
-+/*
-+ * save_stack_trace()
-+ * Save the specified amount of the kernel stack trace information
-+ * for the current task.
-+ */
-+void save_stack_trace(struct stack_trace *trace)
-+{
-+ unsigned long sp = 0;
-+ asm volatile (
-+ " move.4 %0, SP \n\t"
-+ : "=r" (sp)
-+ );
-+ stacktrace_save_entries(current, trace, sp);
-+}
-+EXPORT_SYMBOL_GPL(save_stack_trace);
-+
-+/*
-+ * save_stack_trace_tsk()
-+ * Save the specified amount of the kernel stack trace information
-+ * for the specified task.
-+ *
-+ * Note: We assume the specified task is not currently running.
-+ */
-+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-+{
-+ stacktrace_save_entries(tsk, trace, tsk->thread.sp);
-+}
-+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
-+#endif /* CONFIG_STACKTRACE */
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/syscalltable.S linux-2.6.30.10-ubi/arch/ubicom32/kernel/syscalltable.S
---- linux-2.6.30.10/arch/ubicom32/kernel/syscalltable.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/syscalltable.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,376 @@
-+/*
-+ * arch/ubicom32/kernel/syscalltable.S
-+ * <TODO: Replace with short file description>
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ *
-+ * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
-+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>,
-+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
-+ * Copyright (C) 1991, 1992 Linus Torvalds
-+ */
-+
-+#include <linux/sys.h>
-+#include <linux/linkage.h>
-+#include <asm/unistd.h>
-+
-+.text
-+ALIGN
-+ .global sys_call_table
-+sys_call_table:
-+ .long sys_ni_syscall /* 0 - old "setup()" system call*/
-+ .long sys_exit
-+ .long sys_fork
-+ .long sys_read
-+ .long sys_write
-+ .long sys_open /* 5 */
-+ .long sys_close
-+ .long sys_waitpid
-+ .long sys_creat
-+ .long sys_link
-+ .long sys_unlink /* 10 */
-+ .long execve_intercept
-+ .long sys_chdir
-+ .long sys_time
-+ .long sys_mknod
-+ .long sys_chmod /* 15 */
-+ .long sys_chown16
-+ .long sys_ni_syscall /* old break syscall holder */
-+ .long sys_stat
-+ .long sys_lseek
-+ .long sys_getpid /* 20 */
-+ .long sys_mount
-+ .long sys_oldumount
-+ .long sys_setuid16
-+ .long sys_getuid16
-+ .long sys_stime /* 25 */
-+ .long sys_ptrace
-+ .long sys_alarm
-+ .long sys_fstat
-+ .long sys_pause
-+ .long sys_utime /* 30 */
-+ .long sys_ni_syscall /* old stty syscall holder */
-+ .long sys_ni_syscall /* old gtty syscall holder */
-+ .long sys_access
-+ .long sys_nice
-+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
-+ .long sys_sync
-+ .long sys_kill
-+ .long sys_rename
-+ .long sys_mkdir
-+ .long sys_rmdir /* 40 */
-+ .long sys_dup
-+ .long sys_pipe
-+ .long sys_times
-+ .long sys_ni_syscall /* old prof syscall holder */
-+ .long sys_brk /* 45 */
-+ .long sys_setgid16
-+ .long sys_getgid16
-+ .long sys_signal
-+ .long sys_geteuid16
-+ .long sys_getegid16 /* 50 */
-+ .long sys_acct
-+ .long sys_umount /* recycled never used phys() */
-+ .long sys_ni_syscall /* old lock syscall holder */
-+ .long sys_ioctl
-+ .long sys_fcntl /* 55 */
-+ .long sys_ni_syscall /* old mpx syscall holder */
-+ .long sys_setpgid
-+ .long sys_ni_syscall /* old ulimit syscall holder */
-+ .long sys_ni_syscall
-+ .long sys_umask /* 60 */
-+ .long sys_chroot
-+ .long sys_ustat
-+ .long sys_dup2
-+ .long sys_getppid
-+ .long sys_getpgrp /* 65 */
-+ .long sys_setsid
-+ .long sys_sigaction
-+ .long sys_sgetmask
-+ .long sys_ssetmask
-+ .long sys_setreuid16 /* 70 */
-+ .long sys_setregid16
-+ .long sys_sigsuspend
-+ .long sys_sigpending
-+ .long sys_sethostname
-+ .long sys_setrlimit /* 75 */
-+ .long sys_old_getrlimit
-+ .long sys_getrusage
-+ .long sys_gettimeofday
-+ .long sys_settimeofday
-+ .long sys_getgroups16 /* 80 */
-+ .long sys_setgroups16
-+ .long old_select
-+ .long sys_symlink
-+ .long sys_lstat
-+ .long sys_readlink /* 85 */
-+ .long sys_uselib
-+ .long sys_ni_syscall /* _sys_swapon */
-+ .long sys_reboot
-+ .long sys_old_readdir
-+ .long old_mmap /* 90 */
-+ .long sys_munmap
-+ .long sys_truncate
-+ .long sys_ftruncate
-+ .long sys_fchmod
-+ .long sys_fchown16 /* 95 */
-+ .long sys_getpriority
-+ .long sys_setpriority
-+ .long sys_ni_syscall /* old profil syscall holder */
-+ .long sys_statfs
-+ .long sys_fstatfs /* 100 */
-+ .long sys_ni_syscall /* ioperm for i386 */
-+ .long sys_socketcall
-+ .long sys_syslog
-+ .long sys_setitimer
-+ .long sys_getitimer /* 105 */
-+ .long sys_newstat
-+ .long sys_newlstat
-+ .long sys_newfstat
-+ .long sys_ni_syscall
-+ .long sys_ni_syscall /* iopl for i386 */ /* 110 */
-+ .long sys_vhangup
-+ .long sys_ni_syscall /* obsolete idle() syscall */
-+ .long sys_ni_syscall /* vm86old for i386 */
-+ .long sys_wait4
-+ .long sys_ni_syscall /* 115 */ /* _sys_swapoff */
-+ .long sys_sysinfo
-+ .long sys_ipc
-+ .long sys_fsync
-+ .long sys_sigreturn
-+ .long clone_intercept /* 120 */
-+ .long sys_setdomainname
-+ .long sys_newuname
-+ .long sys_cacheflush /* modify_ldt for i386 */
-+ .long sys_adjtimex
-+ .long sys_ni_syscall /* 125 */ /* _sys_mprotect */
-+ .long sys_sigprocmask
-+ .long sys_ni_syscall /* old "creat_module" */
-+ .long sys_init_module
-+ .long sys_delete_module
-+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
-+ .long sys_quotactl
-+ .long sys_getpgid
-+ .long sys_fchdir
-+ .long sys_bdflush
-+ .long sys_sysfs /* 135 */
-+ .long sys_personality
-+ .long sys_ni_syscall /* for afs_syscall */
-+ .long sys_setfsuid16
-+ .long sys_setfsgid16
-+ .long sys_llseek /* 140 */
-+ .long sys_getdents
-+ .long sys_select
-+ .long sys_flock
-+ .long sys_ni_syscall /* _sys_msync */
-+ .long sys_readv /* 145 */
-+ .long sys_writev
-+ .long sys_getsid
-+ .long sys_fdatasync
-+ .long sys_sysctl
-+ .long sys_ni_syscall /* 150 */ /* _sys_mlock */
-+ .long sys_ni_syscall /* _sys_munlock */
-+ .long sys_ni_syscall /* _sys_mlockall */
-+ .long sys_ni_syscall /* _sys_munlockall */
-+ .long sys_sched_setparam
-+ .long sys_sched_getparam /* 155 */
-+ .long sys_sched_setscheduler
-+ .long sys_sched_getscheduler
-+ .long sys_sched_yield
-+ .long sys_sched_get_priority_max
-+ .long sys_sched_get_priority_min /* 160 */
-+ .long sys_sched_rr_get_interval
-+ .long sys_nanosleep
-+ .long sys_ni_syscall /* _sys_mremap */
-+ .long sys_setresuid16
-+ .long sys_getresuid16 /* 165 */
-+ .long sys_getpagesize /* _sys_getpagesize */
-+ .long sys_ni_syscall /* old "query_module" */
-+ .long sys_poll
-+ .long sys_ni_syscall /* _sys_nfsservctl */
-+ .long sys_setresgid16 /* 170 */
-+ .long sys_getresgid16
-+ .long sys_prctl
-+ .long sys_rt_sigreturn
-+ .long sys_rt_sigaction
-+ .long sys_rt_sigprocmask /* 175 */
-+ .long sys_rt_sigpending
-+ .long sys_rt_sigtimedwait
-+ .long sys_rt_sigqueueinfo
-+ .long sys_rt_sigsuspend
-+ .long sys_pread64 /* 180 */
-+ .long sys_pwrite64
-+ .long sys_lchown16
-+ .long sys_getcwd
-+ .long sys_capget
-+ .long sys_capset /* 185 */
-+ .long sys_sigaltstack
-+ .long sys_sendfile
-+ .long sys_ni_syscall /* streams1 */
-+ .long sys_ni_syscall /* streams2 */
-+ .long vfork_intercept /* 190 */
-+ .long sys_getrlimit
-+ .long sys_mmap2
-+ .long sys_truncate64
-+ .long sys_ftruncate64
-+ .long sys_stat64 /* 195 */
-+ .long sys_lstat64
-+ .long sys_fstat64
-+ .long sys_chown
-+ .long sys_getuid
-+ .long sys_getgid /* 200 */
-+ .long sys_geteuid
-+ .long sys_getegid
-+ .long sys_setreuid
-+ .long sys_setregid
-+ .long sys_getgroups /* 205 */
-+ .long sys_setgroups
-+ .long sys_fchown
-+ .long sys_setresuid
-+ .long sys_getresuid
-+ .long sys_setresgid /* 210 */
-+ .long sys_getresgid
-+ .long sys_lchown
-+ .long sys_setuid
-+ .long sys_setgid
-+ .long sys_setfsuid /* 215 */
-+ .long sys_setfsgid
-+ .long sys_pivot_root
-+ .long sys_ni_syscall
-+ .long sys_ni_syscall
-+ .long sys_getdents64 /* 220 */
-+ .long sys_gettid
-+ .long sys_tkill
-+ .long sys_setxattr
-+ .long sys_lsetxattr
-+ .long sys_fsetxattr /* 225 */
-+ .long sys_getxattr
-+ .long sys_lgetxattr
-+ .long sys_fgetxattr
-+ .long sys_listxattr
-+ .long sys_llistxattr /* 230 */
-+ .long sys_flistxattr
-+ .long sys_removexattr
-+ .long sys_lremovexattr
-+ .long sys_fremovexattr
-+ .long sys_futex /* 235 */
-+ .long sys_sendfile64
-+ .long sys_ni_syscall /* _sys_mincore */
-+ .long sys_ni_syscall /* _sys_madvise */
-+ .long sys_fcntl64
-+ .long sys_readahead /* 240 */
-+ .long sys_io_setup
-+ .long sys_io_destroy
-+ .long sys_io_getevents
-+ .long sys_io_submit
-+ .long sys_io_cancel /* 245 */
-+ .long sys_fadvise64
-+ .long sys_exit_group
-+ .long sys_lookup_dcookie
-+ .long sys_epoll_create
-+ .long sys_epoll_ctl /* 250 */
-+ .long sys_epoll_wait
-+ .long sys_ni_syscall /* _sys_remap_file_pages */
-+ .long sys_set_tid_address
-+ .long sys_timer_create
-+ .long sys_timer_settime /* 255 */
-+ .long sys_timer_gettime
-+ .long sys_timer_getoverrun
-+ .long sys_timer_delete
-+ .long sys_clock_settime
-+ .long sys_clock_gettime /* 260 */
-+ .long sys_clock_getres
-+ .long sys_clock_nanosleep
-+ .long sys_statfs64
-+ .long sys_fstatfs64
-+ .long sys_tgkill /* 265 */
-+ .long sys_utimes
-+ .long sys_fadvise64_64
-+ .long sys_mbind
-+ .long sys_get_mempolicy
-+ .long sys_set_mempolicy /* 270 */
-+ .long sys_mq_open
-+ .long sys_mq_unlink
-+ .long sys_mq_timedsend
-+ .long sys_mq_timedreceive
-+ .long sys_mq_notify /* 275 */
-+ .long sys_mq_getsetattr
-+ .long sys_waitid
-+ .long sys_ni_syscall /* for _sys_vserver */
-+ .long sys_add_key
-+ .long sys_request_key /* 280 */
-+ .long sys_keyctl
-+ .long sys_ioprio_set
-+ .long sys_ioprio_get
-+ .long sys_inotify_init
-+ .long sys_inotify_add_watch /* 285 */
-+ .long sys_inotify_rm_watch
-+ .long sys_migrate_pages
-+ .long sys_openat
-+ .long sys_mkdirat
-+ .long sys_mknodat /* 290 */
-+ .long sys_fchownat
-+ .long sys_futimesat
-+ .long sys_fstatat64
-+ .long sys_unlinkat
-+ .long sys_renameat /* 295 */
-+ .long sys_linkat
-+ .long sys_symlinkat
-+ .long sys_readlinkat
-+ .long sys_fchmodat
-+ .long sys_faccessat /* 300 */
-+ .long sys_ni_syscall /* Reserved for pselect6 */
-+ .long sys_ni_syscall /* Reserved for ppoll */
-+ .long sys_unshare
-+ .long sys_set_robust_list
-+ .long sys_get_robust_list /* 305 */
-+ .long sys_splice
-+ .long sys_sync_file_range
-+ .long sys_tee
-+ .long sys_vmsplice
-+ .long sys_move_pages /* 310 */
-+ .long sys_sched_setaffinity
-+ .long sys_sched_getaffinity
-+ .long sys_kexec_load
-+ .long sys_getcpu
-+ .long sys_epoll_pwait /* 315 */
-+ .long sys_utimensat
-+ .long sys_signalfd
-+ .long sys_timerfd_create
-+ .long sys_eventfd
-+ .long sys_fallocate /* 320 */
-+ .long sys_timerfd_settime
-+ .long sys_timerfd_gettime
-+ .long sys_ni_syscall /* sys_signalfd4 */
-+ .long sys_ni_syscall /* sys_eventfd2 */
-+ .long sys_ni_syscall /* sys_epoll_create1 */
-+ /* 325 */
-+ .long sys_ni_syscall /* sys_dup3 */
-+ .long sys_ni_syscall /* sys_pipe2 */
-+ .long sys_ni_syscall /* sys_inotify_init1 */
-+ .rept NR_syscalls-(.-sys_call_table)/4
-+ .long sys_ni_syscall
-+ .endr
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/sys_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/sys_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/kernel/sys_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/sys_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,237 @@
-+/*
-+ * arch/ubicom32/kernel/sys_ubicom32.c
-+ * Ubicom32 architecture system call support implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * This file contains various random system calls that
-+ * have a non-standard calling sequence on the Linux/ubicom32
-+ * platform.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/smp.h>
-+#include <linux/sem.h>
-+#include <linux/msg.h>
-+#include <linux/shm.h>
-+#include <linux/stat.h>
-+#include <linux/syscalls.h>
-+#include <linux/mman.h>
-+#include <linux/file.h>
-+#include <linux/utsname.h>
-+#include <linux/ipc.h>
-+#include <linux/fs.h>
-+#include <linux/uaccess.h>
-+#include <linux/unistd.h>
-+
-+#include <asm/setup.h>
-+#include <asm/traps.h>
-+#include <asm/cacheflush.h>
-+
-+/* common code for old and new mmaps */
-+static inline long do_mmap2(
-+ unsigned long addr, unsigned long len,
-+ unsigned long prot, unsigned long flags,
-+ unsigned long fd, unsigned long pgoff)
-+{
-+ int error = -EBADF;
-+ struct file *file = NULL;
-+
-+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-+ if (!(flags & MAP_ANONYMOUS)) {
-+ file = fget(fd);
-+ if (!file)
-+ goto out;
-+ }
-+
-+ down_write(¤t->mm->mmap_sem);
-+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-+ up_write(¤t->mm->mmap_sem);
-+
-+ if (file)
-+ fput(file);
-+out:
-+ return error;
-+}
-+
-+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-+ unsigned long prot, unsigned long flags,
-+ unsigned long fd, unsigned long pgoff)
-+{
-+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
-+}
-+
-+/*
-+ * Perform the select(nd, in, out, ex, tv) and mmap() system
-+ * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
-+ * handle more than 4 system call parameters, so these system calls
-+ * used a memory block for parameter passing..
-+ */
-+
-+struct mmap_arg_struct {
-+ unsigned long addr;
-+ unsigned long len;
-+ unsigned long prot;
-+ unsigned long flags;
-+ unsigned long fd;
-+ unsigned long offset;
-+};
-+
-+asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-+{
-+ struct mmap_arg_struct a;
-+ int error = -EFAULT;
-+
-+ if (copy_from_user(&a, arg, sizeof(a)))
-+ goto out;
-+
-+ error = -EINVAL;
-+ if (a.offset & ~PAGE_MASK)
-+ goto out;
-+
-+ a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-+
-+ error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd,
-+ a.offset >> PAGE_SHIFT);
-+out:
-+ return error;
-+}
-+
-+struct sel_arg_struct {
-+ unsigned long n;
-+ fd_set *inp, *outp, *exp;
-+ struct timeval *tvp;
-+};
-+
-+asmlinkage int old_select(struct sel_arg_struct *arg)
-+{
-+ struct sel_arg_struct a;
-+
-+ if (copy_from_user(&a, arg, sizeof(a)))
-+ return -EFAULT;
-+ /* sys_select() does the appropriate kernel locking */
-+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-+}
-+
-+/*
-+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
-+ *
-+ * This is really horribly ugly.
-+ */
-+asmlinkage int sys_ipc(uint call, int first, int second,
-+ int third, void *ptr, long fifth)
-+{
-+ int version, ret;
-+
-+ version = call >> 16; /* hack for backward compatibility */
-+ call &= 0xffff;
-+
-+ if (call <= SEMCTL)
-+ switch (call) {
-+ case SEMOP:
-+ return sys_semop(first, (struct sembuf *)ptr, second);
-+ case SEMGET:
-+ return sys_semget(first, second, third);
-+ case SEMCTL: {
-+ union semun fourth;
-+ if (!ptr)
-+ return -EINVAL;
-+ if (get_user(fourth.__pad, (void **) ptr))
-+ return -EFAULT;
-+ return sys_semctl(first, second, third, fourth);
-+ }
-+ default:
-+ return -EINVAL;
-+ }
-+ if (call <= MSGCTL)
-+ switch (call) {
-+ case MSGSND:
-+ return sys_msgsnd(first, (struct msgbuf *) ptr,
-+ second, third);
-+ case MSGRCV:
-+ switch (version) {
-+ case 0: {
-+ struct ipc_kludge tmp;
-+ if (!ptr)
-+ return -EINVAL;
-+ if (copy_from_user(&tmp,
-+ (struct ipc_kludge *)ptr,
-+ sizeof(tmp)))
-+ return -EFAULT;
-+ return sys_msgrcv(first, tmp.msgp, second,
-+ tmp.msgtyp, third);
-+ }
-+ default:
-+ return sys_msgrcv(first,
-+ (struct msgbuf *) ptr,
-+ second, fifth, third);
-+ }
-+ case MSGGET:
-+ return sys_msgget((key_t) first, second);
-+ case MSGCTL:
-+ return sys_msgctl(first, second,
-+ (struct msqid_ds *) ptr);
-+ default:
-+ return -EINVAL;
-+ }
-+ if (call <= SHMCTL)
-+ switch (call) {
-+ case SHMAT:
-+ switch (version) {
-+ default: {
-+ ulong raddr;
-+ ret = do_shmat(first, ptr, second, &raddr);
-+ if (ret)
-+ return ret;
-+ return put_user(raddr, (ulong __user *) third);
-+ }
-+ }
-+ case SHMDT:
-+ return sys_shmdt(ptr);
-+ case SHMGET:
-+ return sys_shmget(first, second, third);
-+ case SHMCTL:
-+ return sys_shmctl(first, second, ptr);
-+ default:
-+ return -ENOSYS;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+/* sys_cacheflush -- flush (part of) the processor cache. */
-+asmlinkage int
-+sys_cacheflush(unsigned long addr, int scope, int cache, unsigned long len)
-+{
-+ flush_cache_all();
-+ return 0;
-+}
-+
-+asmlinkage int sys_getpagesize(void)
-+{
-+ return PAGE_SIZE;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/thread.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/thread.c
---- linux-2.6.30.10/arch/ubicom32/kernel/thread.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/thread.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,228 @@
-+/*
-+ * arch/ubicom32/kernel/thread.c
-+ * Ubicom32 architecture hardware thread support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/profile.h>
-+#include <linux/clocksource.h>
-+#include <linux/types.h>
-+#include <asm/ip5000.h>
-+#include <asm/machdep.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/thread.h>
-+
-+/*
-+ * TODO: At some point change the name here to be thread_ksp
-+ */
-+unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
-+
-+static unsigned int thread_mask = -1;
-+static unsigned int thread_mainline_mask;
-+
-+/*
-+ * thread_entry()
-+ * Returning from the called function will disable the thread.
-+ *
-+ * This could be a naked call to allow for hwthreads that do not have stacks.
-+ * However, with -O0, the code still writes to thex stack, and this was
-+ * corrupting memory just after the callers stack.
-+ */
-+static void thread_entry(void *arg, thread_exec_fn_t exec)
-+{
-+ /*
-+ * Call thread function
-+ */
-+ exec(arg);
-+
-+ /*
-+ * Complete => Disable self
-+ */
-+ thread_disable(thread_get_self());
-+}
-+
-+/*
-+ * thread_start()
-+ * Start the specified function on the specified hardware thread.
-+ */
-+thread_t thread_start(thread_t thread,
-+ thread_exec_fn_t exec,
-+ void *arg,
-+ unsigned int *sp_high,
-+ thread_type_t type)
-+{
-+ /*
-+ * Sanity check
-+ */
-+ unsigned int enabled, mask, csr;
-+ asm volatile (
-+ "move.4 %0, MT_EN\n\t"
-+ : "=m" (enabled)
-+ );
-+
-+ mask = 1 << thread;
-+ if (enabled & mask) {
-+ printk(KERN_WARNING "request to enable a previously enabled thread\n");
-+ return (thread_t)-1;
-+ }
-+
-+ /*
-+ * Update thread state
-+ */
-+ csr = (thread << 15) | (1 << 14);
-+ asm volatile (
-+ "setcsr %0 \n\t"
-+ "setcsr_flush 0 \n\t"
-+
-+ "move.4 A0, #0 \n\t"
-+ "move.4 A1, #0 \n\t"
-+ "move.4 A2, #0 \n\t"
-+ "move.4 A3, #0 \n\t"
-+ "move.4 A4, #0 \n\t"
-+ "move.4 A5, #0 \n\t"
-+ "move.4 A6, #0 \n\t"
-+ "move.4 SP, %4 \n\t" /* A7 is SP */
-+
-+ "move.4 D0, %3 \n\t"
-+ "move.4 D1, %2 \n\t"
-+ "move.4 D2, #0 \n\t"
-+ "move.4 D3, #0 \n\t"
-+ "move.4 D4, #0 \n\t"
-+ "move.4 D5, #0 \n\t"
-+ "move.4 D6, #0 \n\t"
-+ "move.4 D7, #0 \n\t"
-+ "move.4 D8, #0 \n\t"
-+ "move.4 D9, #0 \n\t"
-+ "move.4 D10, #0 \n\t"
-+ "move.4 D11, #0 \n\t"
-+ "move.4 D12, #0 \n\t"
-+ "move.4 D13, #0 \n\t"
-+ "move.4 D14, #0 \n\t"
-+ "move.4 D15, #0 \n\t"
-+
-+ "move.4 INT_MASK0, #0 \n\t"
-+ "move.4 INT_MASK1, #0 \n\t"
-+ "move.4 PC, %1 \n\t"
-+ "setcsr #0 \n\t"
-+ "setcsr_flush 0 \n\t"
-+ :
-+ : "r" (csr), "r" (thread_entry), "r" (exec),
-+ "r" (arg), "r" (sp_high)
-+ );
-+
-+ /*
-+ * Apply HRT state
-+ */
-+ if (type & THREAD_TYPE_HRT) {
-+ asm volatile (
-+ "or.4 MT_HRT, MT_HRT, %0\n\t"
-+ :
-+ : "d" (mask)
-+ : "cc"
-+ );
-+ } else {
-+ asm volatile (
-+ "and.4 MT_HRT, MT_HRT, %0\n\t"
-+ :
-+ : "d" (~mask)
-+ : "cc"
-+ );
-+ }
-+
-+ /*
-+ * Set priority
-+ */
-+ asm volatile (
-+ "or.4 MT_HPRI, MT_HPRI, %0\n\t"
-+ :
-+ : "d" (mask)
-+ : "cc"
-+ );
-+
-+ /*
-+ * Enable thread
-+ */
-+ asm volatile (
-+ "move.4 MT_ACTIVE_SET, %0 \n\t"
-+ :
-+ : "d" (mask)
-+ );
-+ thread_enable_mask(mask);
-+ return thread;
-+}
-+
-+/*
-+ * thread_get_mainline()
-+ * Return a mask of those threads that are Linux mainline threads.
-+ */
-+unsigned int thread_get_mainline(void)
-+{
-+ return thread_mainline_mask;
-+}
-+
-+/*
-+ * thread_set_mainline()
-+ * Indicate that the specified thread is a Linux mainline thread.
-+ */
-+void thread_set_mainline(thread_t tid)
-+{
-+ thread_mainline_mask |= (1 << tid);
-+}
-+
-+/*
-+ * thread_alloc()
-+ * Allocate an unused hardware thread.
-+ */
-+thread_t thread_alloc(void)
-+{
-+ thread_t tid;
-+
-+ /*
-+ * If this is the first time we are here get the list of unused
-+ * threads from the processor device tree node.
-+ */
-+ if (thread_mask == -1) {
-+ thread_mask = processor_threads();
-+ }
-+
-+ if (!thread_mask) {
-+ return (thread_t)-1;
-+ }
-+
-+ tid = ffs(thread_mask);
-+ if (tid != 0) {
-+ tid--;
-+ thread_mask &= ~(1 << tid);
-+ return tid;
-+ }
-+
-+ return (thread_t)-1;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/time.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/time.c
---- linux-2.6.30.10/arch/ubicom32/kernel/time.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/time.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,212 @@
-+/*
-+ * arch/ubicom32/kernel/time.c
-+ * Initialize the timer list and start the appropriate timers.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/profile.h>
-+#include <linux/smp.h>
-+#include <asm/ip5000.h>
-+#include <asm/machdep.h>
-+
-+/*
-+ * A bitmap of the timers on the processor indicates
-+ * that the timer is free or in-use.
-+ */
-+static unsigned int timers;
-+
-+/*
-+ * timer_set()
-+ * Init the specified compare register to go off <n> cycles from now.
-+ */
-+void timer_set(int timervector, unsigned int cycles)
-+{
-+ int idx = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector);
-+ UBICOM32_IO_TIMER->syscom[idx] =
-+ UBICOM32_IO_TIMER->sysval + cycles;
-+ ldsr_enable_vector(timervector);
-+}
-+
-+/*
-+ * timer_reset()
-+ * Set/reset the timer to go off again.
-+ *
-+ * Because sysval is a continuous timer, this function is able
-+ * to ensure that we do not have clock sku by using the previous
-+ * value in syscom to set the next value for syscom.
-+ *
-+ * Returns the number of ticks that transpired since the last event.
-+ */
-+int timer_reset(int timervector, unsigned int cycles)
-+{
-+ /*
-+ * Reset the timer in the LDSR thread to go off appropriately.
-+ *
-+ * Use the previous value of the timer to calculate the new stop
-+ * time. This allows us to account for it taking an
-+ * indeterminate amount of time to get here.
-+ */
-+ const int timer_index = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector);
-+ unsigned int prev = UBICOM32_IO_TIMER->syscom[timer_index];
-+ unsigned int next = prev + cycles;
-+ int scratchpad3;
-+ int diff;
-+ int ticks = 1;
-+
-+ /*
-+ * If the difference is negative, we have missed at least one
-+ * timer tick.
-+ *
-+ * TODO: Decide if we want to "ignore" time (as done below) or
-+ * if we want to process time (unevenly) by calling timer_tick()
-+ * lost_ticks times.
-+ */
-+ while (1) {
-+ /*
-+ * Set our future time first.
-+ */
-+ UBICOM32_IO_TIMER->syscom[timer_index] = next;
-+
-+ /*
-+ * Then check if we are really set time in the futrue.
-+ */
-+ diff = (int)next - (int)UBICOM32_IO_TIMER->sysval;
-+ if (diff >= 0) {
-+ break;
-+ }
-+
-+ /*
-+ * Oops, we are too slow. Playing catch up.
-+ *
-+ * If the debugger is connected the there is a good
-+ * chance that we lost time because we were in a
-+ * break-point, so in this case we do not print out
-+ * diagnostics.
-+ */
-+ asm volatile ("move.4 %0, scratchpad3"
-+ : "=r" (scratchpad3));
-+ if ((scratchpad3 & 0x1) == 0) {
-+ /*
-+ * No debugger attached, print to the console
-+ */
-+ printk(KERN_EMERG "diff: %d, timer has lost %u "
-+ "ticks [rounded up]\n",
-+ -diff,
-+ (unsigned int)((-diff + cycles - 1) / cycles));
-+ }
-+
-+ do {
-+ next += cycles;
-+ diff = (int)next - (int)UBICOM32_IO_TIMER->sysval;
-+ ticks++;
-+ } while (diff < 0);
-+ }
-+ return ticks;
-+}
-+
-+/*
-+ * sched_clock()
-+ * Returns current time in nano-second units.
-+ *
-+ * Notes:
-+ * 1) This is an override for the weak alias in
-+ * kernel/sched_clock.c.
-+ * 2) Do not use xtime_lock as this function is
-+ * sometimes called with xtime_lock held.
-+ * 3) We use a retry algorithm to ensure that
-+ * we get a consistent value.
-+ * 4) sched_clock must be overwritten if IRQ tracing
-+ * is enabled because the default implementation uses
-+ * the xtime_lock sequence while holding xtime_lock.
-+ */
-+unsigned long long sched_clock(void)
-+{
-+ unsigned long long my_jiffies;
-+ unsigned long jiffies_top;
-+ unsigned long jiffies_bottom;
-+
-+ do {
-+ jiffies_top = jiffies_64 >> 32;
-+ jiffies_bottom = jiffies_64 & 0xffffffff;
-+ } while (unlikely(jiffies_top != (unsigned long)(jiffies_64 >> 32)));
-+
-+ my_jiffies = ((unsigned long long)jiffies_top << 32) | (jiffies_bottom);
-+ return (my_jiffies - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
-+}
-+
-+/*
-+ * timer_free()
-+ * Free a hardware timer.
-+ */
-+void timer_free(int interrupt)
-+{
-+ unsigned int bit = interrupt - TIMER_INT(0);
-+
-+ /*
-+ * The timer had not been allocated.
-+ */
-+ BUG_ON(timers & (1 << bit));
-+ timers |= (1 << bit);
-+}
-+
-+/*
-+ * timer_alloc()
-+ * Allocate a hardware timer.
-+ */
-+int timer_alloc(void)
-+{
-+ unsigned int bit = find_first_bit((unsigned long *)&timers, 32);
-+ if (!bit) {
-+ printk(KERN_WARNING "no more free timers\n");
-+ return -1;
-+ }
-+
-+ timers &= ~(1 << bit);
-+ return bit + TIMER_INT(0);
-+}
-+
-+/*
-+ * time_init()
-+ * Time init function.
-+ */
-+void time_init(void)
-+{
-+ /*
-+ * Find the processor node and determine what timers are
-+ * available for us.
-+ */
-+ timers = processor_timers();
-+ if (timers == 0) {
-+ printk(KERN_WARNING "no timers are available for Linux\n");
-+ return;
-+ }
-+
-+#ifdef CONFIG_GENERIC_CLOCKEVENTS
-+ timer_device_init();
-+#else
-+ timer_tick_init();
-+#endif
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/timer_broadcast.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/timer_broadcast.c
---- linux-2.6.30.10/arch/ubicom32/kernel/timer_broadcast.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/timer_broadcast.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,102 @@
-+/*
-+ * arch/ubicom32/kernel/timer_broadcast.c
-+ * Implements a dummy clock event for each cpu.
-+ *
-+ * Copyright (C) 2008 Paul Mundt
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ * arch/arm
-+ * arch/sh
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/smp.h>
-+#include <linux/jiffies.h>
-+#include <linux/percpu.h>
-+#include <linux/clockchips.h>
-+#include <linux/irq.h>
-+
-+static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-+
-+/*
-+ * The broadcast trick only works when the timer will be used in a periodic mode.
-+ * If the user has configured either NO_HZ or HIGH_RES_TIMERS they must have
-+ * a per cpu timer.
-+ */
-+#if defined(CONFIG_NO_HZ) || defined(CONFIG_HIGH_RES_TIMERS)
-+#error "Tickless and High Resolution Timers require per-CPU local timers: CONFIG_LOCAL_TIMERS"
-+#endif
-+
-+/*
-+ * local_timer_interrupt()
-+ * Used on SMP for local timer interrupt sent via an IPI.
-+ */
-+void local_timer_interrupt(void)
-+{
-+ struct clock_event_device *dev = &__get_cpu_var(local_clockevent);
-+
-+ dev->event_handler(dev);
-+}
-+
-+/*
-+ * dummy_timer_set_next_event()
-+ * Cause the timer to go off "cycles" from now.
-+ */
-+static int dummy_timer_set_next_event(unsigned long cycles, struct clock_event_device *dev)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * dummy_timer_set_mode()
-+ * Do Nothing.
-+ */
-+static void dummy_timer_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *clk)
-+{
-+}
-+
-+/*
-+ * local_timer_setup()
-+ * Adds a clock event for the specified cpu.
-+ */
-+int __cpuinit local_timer_setup(unsigned int cpu)
-+{
-+ struct clock_event_device *dev = &per_cpu(local_clockevent, cpu);
-+
-+ dev->name = "timer-dummy";
-+ dev->features = CLOCK_EVT_FEAT_DUMMY;
-+ dev->rating = 200;
-+ dev->mult = 1;
-+ dev->set_mode = dummy_timer_set_mode;
-+ dev->set_next_event = dummy_timer_set_next_event;
-+ dev->broadcast = smp_timer_broadcast;
-+ dev->cpumask = cpumask_of_cpu(cpu);
-+ dev->irq = -1;
-+ printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
-+
-+ clockevents_register_device(dev);
-+ return 0;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/timer_device.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/timer_device.c
---- linux-2.6.30.10/arch/ubicom32/kernel/timer_device.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/timer_device.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,301 @@
-+/*
-+ * arch/ubicom32/kernel/timer_device.c
-+ * Implements a Ubicom32 clock device and event devices.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/types.h>
-+#include <linux/clockchips.h>
-+#include <linux/clocksource.h>
-+#include <linux/spinlock.h>
-+#include <asm/ip5000.h>
-+#include <asm/machdep.h>
-+
-+#if defined(CONFIG_SMP)
-+#include <asm/smp.h>
-+#endif
-+
-+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-+#define MAX_TIMERS (2 + CONFIG_TIMER_EXTRA_ALLOC)
-+#else
-+#define MAX_TIMERS (NR_CPUS + CONFIG_TIMER_EXTRA_ALLOC)
-+#endif
-+
-+#if (MAX_TIMERS > 10)
-+#error "Ubicom32 only has 10 timers"
-+#endif
-+
-+static unsigned int frequency;
-+static struct clock_event_device timer_device_devs[MAX_TIMERS];
-+static struct irqaction timer_device_irqs[MAX_TIMERS];
-+static int timer_device_next_timer = 0;
-+
-+DEFINE_SPINLOCK(timer_device_lock);
-+
-+/*
-+ * timer_device_set_next_event()
-+ * Cause the timer to go off "cycles" from now.
-+ */
-+static int timer_device_set_next_event(unsigned long cycles, struct clock_event_device *dev)
-+{
-+ timer_set(dev->irq, cycles);
-+ return 0;
-+}
-+
-+/*
-+ * timer_device_set_mode()
-+ * Handle the mode switch for a clock event device.
-+ */
-+static void timer_device_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-+{
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ /*
-+ * Make sure the vector is disabled
-+ * until the next event is set.
-+ */
-+ printk(KERN_NOTICE "timer[%d]: shutdown\n", dev->irq);
-+ ldsr_disable_vector(dev->irq);
-+ break;
-+
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ /*
-+ * Make sure the vector is disabled
-+ * until the next event is set.
-+ */
-+ printk(KERN_NOTICE "timer[%d]: oneshot\n", dev->irq);
-+ ldsr_disable_vector(dev->irq);
-+ break;
-+
-+ case CLOCK_EVT_MODE_PERIODIC:
-+ /*
-+ * The periodic request is 1 per jiffies
-+ */
-+ printk(KERN_NOTICE "timer[%d]: periodic: %d cycles\n",
-+ dev->irq, frequency / CONFIG_HZ);
-+ timer_set(dev->irq, frequency / CONFIG_HZ);
-+ break;
-+
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_RESUME:
-+ printk(KERN_WARNING "timer[%d]: unimplemented mode: %d\n",
-+ dev->irq, mode);
-+ break;
-+ };
-+}
-+
-+/*
-+ * timer_device_event()
-+ * Call the device's event handler.
-+ *
-+ * The pointer is initialized by the generic Linux code
-+ * to the function to be called.
-+ */
-+static irqreturn_t timer_device_event(int irq, void *dev_id)
-+{
-+ struct clock_event_device *dev = (struct clock_event_device *)dev_id;
-+
-+ if (dev->mode == CLOCK_EVT_MODE_PERIODIC) {
-+ /*
-+ * The periodic request is 1 per jiffies
-+ */
-+ timer_reset(dev->irq, frequency / CONFIG_HZ);
-+ } else {
-+ /*
-+ * The timer will go off again at the rollover
-+ * point. We must disable the IRQ to prevent
-+ * getting a spurious interrupt.
-+ */
-+ ldsr_disable_vector(dev->irq);
-+ }
-+
-+ if (!dev->event_handler) {
-+ printk(KERN_CRIT "no registered event handler\n");
-+ return IRQ_HANDLED;
-+ }
-+
-+ dev->event_handler(dev);
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * timer_device_clockbase_read()
-+ * Provide a primary clocksource around the sysval timer.
-+ */
-+static cycle_t timer_device_clockbase_read(void)
-+{
-+ return (cycle_t)UBICOM32_IO_TIMER->sysval;
-+}
-+
-+/*
-+ * Primary Clock Source Description
-+ *
-+ * We use 24 for the shift factor because we want
-+ * to ensure there are less than 2^24 clocks
-+ * in a jiffie of 10 ms.
-+ */
-+static struct clocksource timer_device_clockbase = {
-+ .name = "sysval",
-+ .rating = 400,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .shift = 24,
-+ .mult = 0,
-+ .read = timer_device_clockbase_read,
-+};
-+
-+/*
-+ * timer_device_alloc_event()
-+ * Allocate a timer device event.
-+ */
-+static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t *mask)
-+{
-+ struct clock_event_device *dev;
-+ struct irqaction *action;
-+
-+ /*
-+ * Are we out of configured timers?
-+ */
-+ spin_lock(&timer_device_lock);
-+ if (timer_device_next_timer >= MAX_TIMERS) {
-+ spin_unlock(&timer_device_lock);
-+ printk(KERN_WARNING "out of timer event entries\n");
-+ return -1;
-+ }
-+ dev = &timer_device_devs[timer_device_next_timer];
-+ action = &timer_device_irqs[timer_device_next_timer];
-+ timer_device_next_timer++;
-+ spin_unlock(&timer_device_lock);
-+
-+ /*
-+ * Now allocate a timer to ourselves.
-+ */
-+ dev->irq = timer_alloc();
-+ if (dev->irq == -1) {
-+ spin_lock(&timer_device_lock);
-+ timer_device_next_timer--;
-+ spin_unlock(&timer_device_lock);
-+ printk(KERN_WARNING "out of hardware timers\n");
-+ return -1;
-+ }
-+
-+ /*
-+ * Init the IRQ action structure. Make sure
-+ * this in place before you register the clock
-+ * event device.
-+ */
-+ action->name = name;
-+ action->flags = IRQF_DISABLED | IRQF_TIMER;
-+ action->handler = timer_device_event;
-+ cpumask_copy(&action->mask, mask);
-+ action->dev_id = dev;
-+ setup_irq(dev->irq, action);
-+ irq_set_affinity(dev->irq, mask);
-+ ldsr_disable_vector(dev->irq);
-+
-+ /*
-+ * init clock dev structure.
-+ *
-+ * The min_delta_ns is chosen to ensure that setting next
-+ * event will never be requested with too small of value.
-+ */
-+ dev->name = name;
-+ dev->rating = timer_device_clockbase.rating;
-+ dev->shift = timer_device_clockbase.shift;
-+ dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-+ dev->set_mode = timer_device_set_mode;
-+ dev->set_next_event = timer_device_set_next_event;
-+ dev->mult = div_sc(frequency, NSEC_PER_SEC, dev->shift);
-+ dev->max_delta_ns = clockevent_delta2ns(0xffffffff, dev);
-+ dev->min_delta_ns = clockevent_delta2ns(100, dev);
-+ dev->cpumask = mask;
-+ printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
-+
-+ /*
-+ * Now register the device.
-+ */
-+ clockevents_register_device(dev);
-+ return dev->irq;
-+}
-+
-+#if defined(CONFIG_LOCAL_TIMERS)
-+/*
-+ * local_timer_setup()
-+ * Allocation function for creating a per cpu local timer.
-+ */
-+int __cpuinit local_timer_setup(unsigned int cpu)
-+{
-+ return timer_device_alloc_event("timer-cpu", cpu, cpumask_of(cpu));
-+}
-+#endif
-+
-+/*
-+ * timer_device_init()
-+ * Create and init a generic clock driver for Ubicom32.
-+ */
-+void timer_device_init(void)
-+{
-+ int i;
-+
-+ /*
-+ * Get the frequency from the processor device tree node or use
-+ * the default if not available. We will store this as the frequency
-+ * of the timer to avoid future calculations.
-+ */
-+ frequency = processor_frequency();
-+ if (frequency == 0) {
-+ frequency = CLOCK_TICK_RATE;
-+ }
-+
-+ /*
-+ * Setup the primary clock source around sysval. Linux does not
-+ * supply a Mhz multiplier so convert down to khz.
-+ */
-+ timer_device_clockbase.mult =
-+ clocksource_khz2mult(frequency / 1000,
-+ timer_device_clockbase.shift);
-+ if (clocksource_register(&timer_device_clockbase)) {
-+ printk(KERN_ERR "timer: clocksource failed to register\n");
-+ return;
-+ }
-+
-+ /*
-+ * Always allocate a primary timer.
-+ */
-+ timer_device_alloc_event("timer-primary", -1, CPU_MASK_ALL_PTR);
-+
-+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-+ /*
-+ * If BROADCAST is selected we need to add a broadcast timer.
-+ */
-+ timer_device_alloc_event("timer-broadcast", -1, CPU_MASK_ALL_PTR);
-+#endif
-+
-+ /*
-+ * Allocate extra timers that are requested.
-+ */
-+ for (i = 0; i < CONFIG_TIMER_EXTRA_ALLOC; i++) {
-+ timer_device_alloc_event("timer-extra", -1, CPU_MASK_ALL_PTR);
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/timer_tick.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/timer_tick.c
---- linux-2.6.30.10/arch/ubicom32/kernel/timer_tick.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/timer_tick.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/ubicom32/kernel/timer_tick.c
-+ * Impelemets a perodic timer.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/profile.h>
-+
-+#include <asm/ip5000.h>
-+#include <asm/machdep.h>
-+#if defined(CONFIG_SMP)
-+#include <asm/smp.h>
-+#endif
-+
-+static unsigned int timervector;
-+static unsigned int frequency;
-+
-+/*
-+ * timer_tick()
-+ * Kernel system timer support. Needs to keep up the real-time clock,
-+ * as well as call the "do_timer()" routine every clocktick.
-+ */
-+static irqreturn_t timer_tick(int irq, void *dummy)
-+{
-+ int ticks;
-+
-+ BUG_ON(!irqs_disabled());
-+ ticks = timer_reset(timervector, frequency);
-+
-+ write_seqlock(&xtime_lock);
-+ do_timer(ticks);
-+ write_sequnlock(&xtime_lock);
-+
-+ update_process_times(user_mode(get_irq_regs()));
-+ profile_tick(CPU_PROFILING);
-+
-+#if defined(CONFIG_SMP)
-+ smp_send_timer_all();
-+#endif
-+ return(IRQ_HANDLED);
-+}
-+
-+/*
-+ * Data used by setup_irq for the timer.
-+ */
-+static struct irqaction timer_irq = {
-+ .name = "timer",
-+ .flags = IRQF_DISABLED | IRQF_TIMER,
-+ .handler = timer_tick,
-+};
-+
-+/*
-+ * timer_tick_init()
-+ * Implements a periodic timer
-+ *
-+ * This implementation directly calls the timer_tick() and move
-+ * the Linux kernel forward. This is used when the user has not
-+ * selected GENERIC_CLOCKEVENTS.
-+ */
-+void timer_tick_init(void)
-+{
-+ /*
-+ * Now allocate a timer to ourselves.
-+ */
-+ timervector = timer_alloc();
-+ if (timervector == -1) {
-+ printk(KERN_WARNING "where did the timer go?\n");
-+ return;
-+ }
-+
-+ setup_irq(timervector, &timer_irq);
-+
-+ /*
-+ * Get the frequency from the processor device tree node or use
-+ * the default if not available. We will store this as the frequency
-+ * of the timer to avoid future calculations.
-+ */
-+ frequency = processor_frequency();
-+ if (frequency == 0) {
-+ frequency = CLOCK_TICK_RATE;
-+ }
-+ frequency /= CONFIG_HZ;
-+
-+ printk(KERN_NOTICE "timer will interrupt every: %d cycles\n", frequency);
-+ timer_set(timervector, frequency);
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/topology.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/topology.c
---- linux-2.6.30.10/arch/ubicom32/kernel/topology.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/topology.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,47 @@
-+/*
-+ * arch/ubicom32/kernel/topology.c
-+ * Ubicom32 architecture sysfs topology information.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/smp.h>
-+#include <linux/cpu.h>
-+#include <linux/cache.h>
-+
-+static struct cpu cpu_devices[NR_CPUS] __read_mostly;
-+
-+static int __init topology_init(void)
-+{
-+ int num;
-+
-+ for_each_present_cpu(num) {
-+ cpu_devices[num].hotpluggable = 0;
-+ register_cpu(&cpu_devices[num], num);
-+ }
-+ return 0;
-+}
-+
-+subsys_initcall(topology_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/traps.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/traps.c
---- linux-2.6.30.10/arch/ubicom32/kernel/traps.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/traps.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,514 @@
-+/*
-+ * arch/ubicom32/kernel/traps.c
-+ * Ubicom32 architecture trap handling support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+/*
-+ * Sets up all exception vectors
-+ */
-+#include <linux/sched.h>
-+#include <linux/signal.h>
-+#include <linux/kernel.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/a.out.h>
-+#include <linux/user.h>
-+#include <linux/string.h>
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <linux/ptrace.h>
-+#include <linux/kallsyms.h>
-+#include <linux/compiler.h>
-+#include <linux/stacktrace.h>
-+#include <linux/personality.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/stacktrace.h>
-+#include <asm/devtree.h>
-+#include <asm/setup.h>
-+#include <asm/fpu.h>
-+#include <asm/system.h>
-+#include <asm/traps.h>
-+#include <asm/pgtable.h>
-+#include <asm/processor.h>
-+#include <asm/machdep.h>
-+#include <asm/siginfo.h>
-+#include <asm/ip5000.h>
-+#include <asm/thread.h>
-+
-+#define TRAP_MAX_STACK_DEPTH 20
-+
-+/*
-+ * These symbols are filled in by the linker.
-+ */
-+extern unsigned long _stext;
-+extern unsigned long _etext;
-+
-+extern unsigned long __ocm_text_run_begin;
-+extern unsigned long __data_begin;
-+
-+extern void show_vmas(struct task_struct *task);
-+
-+const char *trap_cause_strings[] = {
-+ /*0*/ "inst address decode error",
-+ /*1*/ "inst sync error",
-+ /*2*/ "inst illegal",
-+ /*3*/ "src1 address decode error",
-+ /*4*/ "dst address decode error",
-+ /*5*/ "src1 alignment error",
-+ /*6*/ "dst alignment error",
-+ /*7*/ "src1 sync error",
-+ /*8*/ "dst sync error",
-+ /*9*/ "DCAPT error",
-+ /*10*/ "inst range error",
-+ /*11*/ "src1 range error",
-+ /*12*/ "dst range error",
-+};
-+
-+/*
-+ * The device tree trap node definition.
-+ */
-+struct trapnode {
-+ struct devtree_node dn;
-+ unsigned int intthread;
-+};
-+
-+static struct trapnode *tn;;
-+
-+/*
-+ * trap_interrupt_handler()
-+ * Software Interrupt to ensure that a trap is serviced.
-+ */
-+static irqreturn_t trap_interrupt_handler(int irq, void *dummy)
-+{
-+ /* Do Nothing */
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Data used by setup_irq for the timer.
-+ */
-+static struct irqaction trap_irq = {
-+ .name = "trap",
-+ .flags = IRQF_DISABLED,
-+ .handler = trap_interrupt_handler,
-+};
-+
-+/*
-+ * trap_cause_to_str()
-+ * Convert a trap_cause into a series of printk
-+ */
-+static void trap_cause_to_str(long status)
-+{
-+ int bit;
-+
-+ if ((status & ((1 << TRAP_CAUSE_TOTAL) - 1)) == 0) {
-+ printk(KERN_NOTICE "decode: UNKNOWN CAUSES\n");
-+ return;
-+ }
-+
-+ for (bit = 0; bit < TRAP_CAUSE_TOTAL; bit++) {
-+ if (status & (1 << bit)) {
-+ printk(KERN_NOTICE "\tdecode: %08x %s\n",
-+ 1 << bit, trap_cause_strings[bit]);
-+ }
-+ }
-+}
-+
-+/*
-+ * trap_print_information()
-+ * Print the cause of the trap and additional info.
-+ */
-+static void trap_print_information(const char *str, struct pt_regs *regs)
-+{
-+ printk(KERN_WARNING "\n");
-+
-+ if (current) {
-+ printk(KERN_WARNING "Process %s (pid: %d)\n",
-+ current->comm, current->pid);
-+ }
-+
-+ if (current && current->mm) {
-+ printk(KERN_NOTICE "text = 0x%p-0x%p data = 0x%p-0x%p\n"
-+ KERN_NOTICE "bss = 0x%p-0x%p user-stack = 0x%p\n"
-+ KERN_NOTICE "\n",
-+ (void *)current->mm->start_code,
-+ (void *)current->mm->end_code,
-+ (void *)current->mm->start_data,
-+ (void *)current->mm->end_data,
-+ (void *)current->mm->end_data,
-+ (void *)current->mm->brk,
-+ (void *)current->mm->start_stack);
-+ }
-+
-+ printk(KERN_WARNING "%s: Causes: 0x%08x\n", str,
-+ (unsigned int)regs->trap_cause);
-+ trap_cause_to_str(regs->trap_cause);
-+ show_regs(regs);
-+ show_stack(NULL, (unsigned long *)regs->an[7]);
-+ printk(KERN_NOTICE "--- End Trap --- \n");
-+}
-+
-+/*
-+ * dump_stack()
-+ * Dump the stack of the current task.
-+ */
-+void dump_stack(void)
-+{
-+ show_stack(NULL, NULL);
-+}
-+EXPORT_SYMBOL(dump_stack);
-+
-+/*
-+ * show_stack()
-+ * Print out information from the current stack.
-+ */
-+void show_stack(struct task_struct *task, unsigned long *sp)
-+{
-+ /*
-+ * Allocate just enough entries on the stack.
-+ */
-+ unsigned int calls[TRAP_MAX_STACK_DEPTH];
-+ unsigned long code_start;
-+ unsigned long code_end;
-+ unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin;
-+ unsigned long ocm_code_end = (unsigned long)&__data_begin;
-+ unsigned long stack_end = (unsigned long)(current->stack + THREAD_SIZE - 8);
-+ unsigned long stack = (unsigned long)sp;
-+ int kernel_stack = 1;
-+
-+ processor_dram(&code_start, &code_end);
-+
-+ /*
-+ * Which task are we talking about.
-+ */
-+ if (!task) {
-+ task = current;
-+ }
-+
-+ /*
-+ * Find the stack for the task if one was not specified. Otherwise
-+ * use the specified stack.
-+ */
-+ if (!stack) {
-+ if (task != current) {
-+ stack = task->thread.sp;
-+ stack_end = (unsigned long)task->stack + THREAD_SIZE - 8;
-+ } else {
-+ asm volatile (
-+ "move.4 %0, SP \n\t"
-+ : "=r" (stack)
-+ );
-+ }
-+ }
-+
-+ printk(KERN_NOTICE "Starting backtrace: PID %d '%s'\n",
-+ task->pid, task->comm);
-+
-+ /*
-+ * We do 2 passes the first pass is Kernel stack is the second
-+ * User stack.
-+ */
-+ while (kernel_stack) {
-+ unsigned long *handle;
-+ unsigned int i, idx = 0;
-+ struct pt_regs *pt = task_pt_regs(task);
-+
-+ /*
-+ * If the task is in user mode, reset the start
-+ * and end values for text.
-+ */
-+ if (__user_mode(stack)) {
-+ if (!(task->personality & FDPIC_FUNCPTRS)) {
-+ printk(KERN_NOTICE " User Stack:\n");
-+ code_start = task->mm->start_code;
-+ code_end = task->mm->end_code;
-+ } else {
-+ printk(KERN_NOTICE " User Stack (fdpic):\n");
-+ show_vmas(task);
-+ }
-+ stack_end = task->mm->start_stack;
-+ ocm_code_end = ocm_code_start = 0;
-+ kernel_stack = 0;
-+ } else {
-+ printk(KERN_NOTICE " Kernel Stack:\n");
-+ }
-+
-+ /*
-+ * Collect the stack back trace information.
-+ */
-+ printk(" code[0x%lx-0x%lx]", code_start, code_end);
-+ if (ocm_code_start) {
-+ printk(" ocm_code[0x%lx-0x%lx]",
-+ ocm_code_start, ocm_code_end);
-+ }
-+ printk("\n stack[0x%lx-0x%lx]\n", stack, stack_end);
-+
-+ handle = (unsigned long*)stack;
-+ while (idx < TRAP_MAX_STACK_DEPTH) {
-+ calls[idx] = stacktrace_iterate(&handle,
-+ code_start, code_end,
-+ ocm_code_start, ocm_code_end,
-+ (unsigned long)stack, stack_end);
-+ if (calls[idx] == 0) {
-+ break;
-+ }
-+ idx++;
-+ }
-+
-+ /*
-+ * Now print out the data.
-+ */
-+ printk(KERN_NOTICE " CALL && CALLI on stack:");
-+ for (i = 0; i < idx; i++) {
-+ printk("%s0x%x, ", (i & 0x3) == 0 ? "\n " : "",
-+ calls[i]);
-+ }
-+ printk(idx == TRAP_MAX_STACK_DEPTH ? "...\n" : "\n");
-+
-+ /*
-+ * If we are doing user stack we are done
-+ */
-+ if (!kernel_stack) {
-+ break;
-+ }
-+
-+ /*
-+ * Does this kernel stack have a mm (i.e. is it user)
-+ */
-+ if (!task->mm) {
-+ printk("No mm for userspace stack.\n");
-+ break;
-+ }
-+ /*
-+ * Get the user-mode stack (if any)
-+ */
-+ stack = pt->an[7];
-+ printk(KERN_NOTICE "Userspace stack at 0x%lx frame type %d\n",
-+ stack, (int)pt->frame_type);
-+ if (!__user_mode(stack)) {
-+ break;
-+ }
-+ }
-+}
-+
-+/*
-+ * die_if_kernel()
-+ * Determine if we are in kernel mode and if so print stuff out and die.
-+ */
-+void die_if_kernel(char *str, struct pt_regs *regs, long trap_cause)
-+{
-+ unsigned int s3value;
-+
-+ if (user_mode(regs)) {
-+ return;
-+ }
-+
-+ console_verbose();
-+ trap_print_information(str, regs);
-+
-+ /*
-+ * If the debugger is attached via the hardware mailbox protocol,
-+ * go into an infinite loop and the debugger will figure things out.
-+ */
-+ asm volatile (
-+ "move.4 %0, scratchpad3"
-+ : "=r" (s3value)
-+ );
-+ if (s3value) {
-+ asm volatile("1: jmpt.t 1b");
-+ }
-+
-+ /*
-+ * Set the debug taint value.
-+ */
-+ add_taint(TAINT_DIE);
-+ do_exit(SIGSEGV);
-+}
-+
-+/*
-+ * trap_handler()
-+ * Handle traps.
-+ *
-+ * Traps are treated as interrupts and registered with the LDSR. When
-+ * the LDSR takes the interrupt, it will determine if a trap has occurred
-+ * and service the trap prior to servicing the interrupt.
-+ *
-+ * This function is directly called by the LDSR.
-+ */
-+void trap_handler(int irq, struct pt_regs *regs)
-+{
-+ int sig = SIGSEGV;
-+ siginfo_t info;
-+ unsigned int trap_cause = regs->trap_cause;
-+
-+ BUG_ON(!irqs_disabled());
-+
-+ /*
-+ * test if in kernel and die.
-+ */
-+ die_if_kernel("Kernel Trap", regs, trap_cause);
-+
-+ /*
-+ * User process problem, setup a signal for this process
-+ */
-+ if ((trap_cause & (1 << TRAP_CAUSE_DST_RANGE_ERR)) ||
-+ (trap_cause & (1 << TRAP_CAUSE_SRC1_RANGE_ERR)) ||
-+ (trap_cause & (1 << TRAP_CAUSE_I_RANGE_ERR))) {
-+ sig = SIGSEGV;
-+ info.si_code = SEGV_MAPERR;
-+ } else if ((trap_cause & (1 << TRAP_CAUSE_DST_MISALIGNED)) ||
-+ (trap_cause & (1 << TRAP_CAUSE_SRC1_MISALIGNED))) {
-+ sig = SIGBUS;
-+ info.si_code = BUS_ADRALN;
-+ } else if ((trap_cause & (1 << TRAP_CAUSE_DST_DECODE_ERR)) ||
-+ (trap_cause & (1 << TRAP_CAUSE_SRC1_DECODE_ERR))) {
-+ sig = SIGILL;
-+ info.si_code = ILL_ILLOPN;
-+ } else if ((trap_cause & (1 << TRAP_CAUSE_ILLEGAL_INST))) {
-+ /*
-+ * Check for software break point and if found signal trap
-+ * not illegal instruction.
-+ */
-+ unsigned long instruction;
-+ if (between(regs->pc, KERNELSTART, memory_end) &&
-+ (regs->pc & 3) == 0 &&
-+ get_user(instruction, (unsigned long *)regs->pc) == 0) {
-+
-+ /*
-+ * This used to be 0xaabbccdd but it turns out
-+ * that is now valid in ubicom32v4 isa so we
-+ * have switched to 0xfabbccdd
-+ */
-+ if ((instruction == 0xfabbccdd) ||
-+ (instruction == 0xaabbccdd)) {
-+ sig = SIGTRAP;
-+ info.si_code = TRAP_BRKPT;
-+ goto send_signal;
-+ }
-+ }
-+ sig = SIGILL;
-+ info.si_code = ILL_ILLOPC;
-+ } else if ((trap_cause & (1 << TRAP_CAUSE_I_DECODE_ERR))) {
-+ sig = SIGILL;
-+ info.si_code = ILL_ILLOPC;
-+ } else if ((trap_cause & (1 << TRAP_CAUSE_DCAPT))) {
-+ sig = SIGTRAP;
-+ info.si_code = TRAP_TRACE;
-+ }
-+
-+ /*
-+ * Print a trap information block to the console, do not
-+ * print this above the case because we don't want it
-+ * printed for software break points.
-+ */
-+ trap_print_information("User Trap", regs);
-+
-+send_signal:
-+
-+ force_sig_info(sig, &info, current);
-+
-+ /*
-+ * Interrupts are disabled, re-enable them now.
-+ */
-+ if (!irqs_disabled()) {
-+ printk(KERN_EMERG "interrupts enabled on exit, irq=%d, regs=%p",
-+ irq, regs);
-+ BUG();
-+ }
-+}
-+
-+/*
-+ * trap_init_interrupt()
-+ * We need a 2nd trap handling init that will occur after init_IRQ().
-+ */
-+void __init trap_init_interrupt(void)
-+{
-+ int err;
-+ unsigned char tirq;
-+ struct devtree_node *dn = (struct devtree_node *)tn;
-+
-+ /*
-+ * Now setup the Software IRQ so that if a trap occurs the LDSR
-+ * is started. The irq is there just to "force" the LDSR to run.
-+ */
-+ if (!tn) {
-+ printk(KERN_WARNING "trap_init_interrupt skipped.\n");
-+ return;
-+ }
-+
-+ err = devtree_irq(dn, NULL, &tirq);
-+ if (err) {
-+ printk(KERN_WARNING "error obtaining trap irq value: %d\n",
-+ err);
-+ return;
-+ }
-+
-+ if (tirq == DEVTREE_IRQ_NONE) {
-+ printk(KERN_WARNING "trap irq not available: %d\n", tirq);
-+ return;
-+ }
-+
-+ err = setup_irq(tirq, &trap_irq);
-+ if (err) {
-+ printk(KERN_WARNING "trap irq setup failed: %d\n", err);
-+ return;
-+ }
-+
-+ /*
-+ * Let ultra know which thread is handling the traps and
-+ * what the interrupt to use is.
-+ */
-+ tn->intthread = ldsr_get_threadid();
-+
-+ /*
-+ * Tell the LDSR about our IRQ so that it will unsuspend
-+ * if one occurs while waiting for the per thread lock.
-+ */
-+ ldsr_set_trap_irq(tirq);
-+}
-+
-+/*
-+ * trap_init()
-+ * init trap handling
-+ *
-+ * Trap handling is done through the ldsr. Every time an interrupt
-+ * occurs, the LDSR looks for threads that are listed in the TRAP
-+ * register and forces a call to the trap handler.
-+ */
-+void __init trap_init(void)
-+{
-+ /*
-+ * If we do not have a trap node in the device tree, we leave the fault
-+ * handling to the underlying hardware.
-+ */
-+ tn = (struct trapnode *)devtree_find_node("traps");
-+ if (!tn) {
-+ printk(KERN_WARNING "traps are not handled by linux\n");
-+ return;
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/uaccess.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/uaccess.c
---- linux-2.6.30.10/arch/ubicom32/kernel/uaccess.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/uaccess.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/ubicom32/include/asm/uaccess.c
-+ * User space memory access functions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/module.h>
-+
-+#include <asm/segment.h>
-+#include <asm/uaccess.h>
-+
-+extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
-+
-+/*
-+ * __access_ok()
-+ * Check that the address is in the current processes.
-+ *
-+ * NOTE: The kernel uses "pretend" user addresses that wind
-+ * up calling access_ok() so this approach has only marginal
-+ * value because you wind up with lots of false positives.
-+ */
-+int __access_ok(unsigned long addr, unsigned long size)
-+{
-+ // struct vm_area_struct *vma;
-+
-+ /*
-+ * Don't do anything if we are not a running system yet.
-+ */
-+ if (system_state != SYSTEM_RUNNING) {
-+ return 1;
-+ }
-+
-+ /*
-+ * It appears that Linux will call this function even when we are not
-+ * in the context of a user space application that has a VM address
-+ * space. So we must check that current and mm are valid before
-+ * performing the check.
-+ */
-+ if ((!current) || (!current->mm)) {
-+ return 1;
-+ }
-+
-+ /*
-+ * We perform some basic checks on the address to ensure that it
-+ * is at least within the range of DRAM.
-+ */
-+ if ((addr < (int)&_etext) || (addr > memory_end)) {
-+ printk(KERN_WARNING "pid=%d[%s]: range [%lx - %lx] not in memory area: [%lx - %lx]\n",
-+ current->pid, current->comm,
-+ addr, addr + size,
-+ memory_start, memory_end);
-+ return 0;
-+ }
-+
-+ /*
-+ * For nommu Linux we can check this by looking at the allowed
-+ * memory map for the process.
-+ *
-+ * TODO: Since the kernel passes addresses in it's own space as though
-+ * they were user address, we can not validate the addresses this way.
-+ */
-+#if 0
-+ if (!down_read_trylock(¤t->mm->mmap_sem)) {
-+ return 1;
-+ }
-+ vma = find_vma(current->mm, addr);
-+ if (!vma) {
-+ up_read(¤t->mm->mmap_sem);
-+ printk(KERN_WARNING "pid=%d[%s]: possible invalid acesss on range: [%lx - %lx]\n",
-+ current->pid, current->comm, addr, addr + size);
-+ return 1;
-+ }
-+ if ((addr + size) > vma->vm_end) {
-+ up_read(¤t->mm->mmap_sem);
-+ printk(KERN_WARNING "pid=%d[%s]: possible invalid length on range: [%lx - %lx]\n",
-+ current->pid, current->comm, addr, addr + size);
-+ return 1;
-+ }
-+ up_read(¤t->mm->mmap_sem);
-+#endif
-+ return 1;
-+}
-+
-+EXPORT_SYMBOL(__access_ok);
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/ubicom32_context_switch.S linux-2.6.30.10-ubi/arch/ubicom32/kernel/ubicom32_context_switch.S
---- linux-2.6.30.10/arch/ubicom32/kernel/ubicom32_context_switch.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/ubicom32_context_switch.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,359 @@
-+/*
-+ * arch/ubicom32/kernel/ubicom32_context_switch.S
-+ * Implements context switch and return functions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/sys.h>
-+#include <linux/linkage.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/ubicom32-common.h>
-+#include <asm/ip5000.h>
-+#include <asm/range-protect.h>
-+
-+/*
-+ * begin_restore_context()
-+ * Restore most of the context from sp (struct pt_reg *)
-+ *
-+ * This *can* be called without the global atomic lock. (because sp is
-+ * not restored!) Only d15 and a3 are allowed to be used after this
-+ * before calling complete_restore_context
-+ */
-+.macro begin_restore_context
-+ move.4 d0, PT_D0(sp)
-+ move.4 d1, PT_D1(sp)
-+ move.4 d2, PT_D2(sp)
-+ move.4 d3, PT_D3(sp)
-+ move.4 d4, PT_D4(sp)
-+ move.4 d5, PT_D5(sp)
-+ move.4 d6, PT_D6(sp)
-+ move.4 d7, PT_D7(sp)
-+ move.4 d8, PT_D8(sp)
-+ move.4 d9, PT_D9(sp)
-+ move.4 d10, PT_D10(sp)
-+ move.4 d11, PT_D11(sp)
-+ move.4 d12, PT_D12(sp)
-+ move.4 d13, PT_D13(sp)
-+ move.4 d14, PT_D14(sp)
-+;; move.4 d15, PT_D15(sp)
-+ move.4 a0, PT_A0(sp)
-+ move.4 a1, PT_A1(sp)
-+ move.4 a2, PT_A2(sp)
-+;; move.4 a3, PT_A3(sp)
-+ move.4 a4, PT_A4(sp)
-+ move.4 a5, PT_A5(sp)
-+ move.4 a6, PT_A6(sp)
-+ move.4 acc0_hi, PT_ACC0HI(sp)
-+ move.4 acc0_lo, PT_ACC0LO(sp)
-+ move.4 mac_rc16, PT_MAC_RC16(sp)
-+ move.4 acc1_hi, PT_ACC1HI(sp)
-+ move.4 acc1_lo, PT_ACC1LO(sp)
-+ move.4 source3, PT_SOURCE3(sp)
-+ move.4 int_mask0, PT_INT_MASK0(sp)
-+ move.4 int_mask1, PT_INT_MASK1(sp)
-+.endm
-+
-+/*
-+ * complete_restore_context()
-+ * Completely restore the context from sp (struct pt_reg *)
-+ *
-+ * Note: Recovered PC and CSR are saved on the stack and are to be
-+ * popped off before returning.
-+ */
-+.macro complete_restore_context
-+ move.4 a3, sp
-+ move.4 d15, PT_D15(sp)
-+ move.4 sp, PT_SP(a3) ; Recover Stack pointer from save area
-+ move.4 -4(sp)++, PT_PC(a3) ; Recover saved PC and save to stack
-+ move.4 -4(sp)++, PT_CSR(a3) ; Recover saved csr and save to stack
-+ move.4 a3, PT_A3(a3)
-+.endm
-+
-+/*
-+ * old restore_context macro
-+ */
-+.macro restore_context
-+ begin_restore_context
-+ complete_restore_context
-+.endm
-+
-+/*
-+ * ldsr_thread_enable_interrupts()
-+ * An assembly version of the enable interrupts function.
-+ *
-+ * The stack is fair game but all registers MUST be preserved.
-+ *
-+ */
-+.macro ldsr_thread_enable_interrupts
-+ move.4 -4(sp)++, d3 ; Push d3
-+ move.4 -4(sp)++, a3 ; Push a3
-+
-+ /*
-+ * Read the ROSR and obtain ~(1 << tid)
-+ */
-+ lsr.4 d3, rosr, #0x2 ; Move the thread portion of ROSR into d3
-+ lsl.4 d3, #1, d3 ; perform a (1 << tid)
-+ not.4 d3, d3 ; Negate the value of d3 == ~(1 << threadid)
-+
-+ /*
-+ * Get the value of the ldsr_soft_irq_mask
-+ */
-+ moveai a3, #%hi(ldsr_soft_irq_mask)
-+ move.4 a3, %lo(ldsr_soft_irq_mask)(a3)
-+
-+ /*
-+ * Now re-enable interrupts for this thread and then
-+ * wakeup the LDSR.
-+ */
-+ and.4 scratchpad1, scratchpad1, d3
-+ move.4 int_set0, a3
-+
-+ /*
-+ * Restore the registers.
-+ */
-+ move.4 a3, (sp)4++
-+ move.4 d3, (sp)4++
-+.endm
-+
-+/*
-+ * ret_from_interrupt_to_kernel()
-+ * RFI function that is where do_IRQ() returns to if the thread was
-+ * in kernel space.
-+ */
-+ .section .text.ret_from_interrupt_to_kernel, "ax", @progbits
-+ .global ret_from_interrupt_to_kernel
-+ret_from_interrupt_to_kernel:
-+ begin_restore_context ; Restore the thread context
-+ atomic_lock_acquire ; Enter critical section
-+ complete_restore_context ; Restore the thread context
-+ atomic_lock_release ; Leave critical section
-+ ldsr_thread_enable_interrupts ; enable the threads interrupts
-+ move.4 csr, (sp)4++ ; Restore csr from the stack
-+ ret (sp)4++
-+
-+/*
-+ * ret_from_interrupt_to_user()
-+ * RFI function that is where do_IRQ() returns to if the thread was
-+ * in user space.
-+ *
-+ * TODO: Do we really need the critical section handling in this code?
-+ *
-+ */
-+ .section .text.ret_from_interrupt_to_user, "ax", @progbits
-+ .global ret_from_interrupt_to_user
-+ret_from_interrupt_to_user:
-+ ldsr_thread_enable_interrupts ; enable the threads interrupts
-+ /*
-+ * Set a1 to the thread info pointer, no need to save it as we are
-+ * restoring userspace and will never return
-+ */
-+ movei d0, #(~(ASM_THREAD_SIZE-1))
-+ and.4 a1, sp, d0
-+
-+ /*
-+ * Test if the scheduler needs to be called.
-+ */
-+ btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED
-+ jmpeq.t 2f
-+ call a5, schedule ; Call the scheduler. I will come back here.
-+
-+ /*
-+ * See if we have pending signals and call do_signal
-+ * if needed.
-+ */
-+2:
-+ btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING ; Any signals needed?
-+ jmpeq.t 1f
-+
-+ /*
-+ * Now call do_signal()
-+ */
-+ move.4 d0, #0 ; oldset pointer is NULL
-+ move.4 d1, sp ; d1 is the regs pointer
-+ call a5, do_signal ; Call do_signal()
-+
-+ /*
-+ * Back from do_signal(), re-enter critical section.
-+ */
-+1:
-+ begin_restore_context ; Restore the thread context
-+ atomic_lock_acquire ; Enter critical section
-+ call a3, __complete_and_return_to_userspace ; jump to unprotected section
-+
-+/*
-+ * restore_all_registers()
-+ *
-+ * restore_all_registers will be the alternate exit route for
-+ * preempted processes that have called a signal handler
-+ * and are returning back to user space.
-+ */
-+ .section .text.restore_all_registers, "ax", @progbits
-+ .global restore_all_registers
-+restore_all_registers:
-+ begin_restore_context ; Restore the thread context
-+ atomic_lock_acquire ; Enter critical section
-+ call a3, __complete_and_return_to_userspace
-+
-+/*
-+ * __complete_and_return_to_userspace
-+ *
-+ * restores the second half of the context and returns
-+ * You must have the atomic lock when you call this function
-+ */
-+ .section .kernel_unprotected, "ax", @progbits
-+__complete_and_return_to_userspace:
-+ disable_kernel_ranges_for_current d15 ; disable kernel ranges
-+ complete_restore_context ; restore previous context
-+ atomic_lock_release ; Leave critical section
-+ move.4 csr, (sp)4++ ; Restore csr from the stack
-+ ret (sp)4++
-+
-+/*
-+ * ret_from_fork()
-+ * Called on the child's return from fork system call.
-+ */
-+ .section .text.ret_from_fork, "ax", @progbits
-+ .global ret_from_fork
-+ret_from_fork:
-+ ;;; d0 contains the arg for schedule_tail
-+ ;;; the others we don't care about as they are in PT_REGS (sp)
-+ call a5, schedule_tail
-+
-+ atomic_lock_acquire ; Enter critical section
-+
-+ move.4 a3, sp
-+ move.4 d0, PT_D0(a3) ; Restore D0
-+ move.4 d1, PT_D1(a3) ; Restore D1
-+ move.4 d2, PT_D2(a3) ; Restore D2
-+ move.4 d3, PT_D3(a3) ; Restore D3
-+ move.4 d10, PT_D10(a3) ; Restore D10
-+ move.4 d11, PT_D11(a3) ; Restore D11
-+ move.4 d12, PT_D12(a3) ; Restore D12
-+ move.4 d13, PT_D13(a3) ; Restore D13
-+ move.4 a1, PT_A1(a3) ; Restore A1
-+ move.4 a2, PT_A2(a3) ; Restore A2
-+ move.4 a5, PT_A5(a3) ; Restore A5
-+ move.4 a6, PT_A6(a3) ; Restore A6
-+ ;; I think atomic_lock_acquire could be moved here..
-+ move.4 sp, PT_SP(a3) ; Restore sp
-+ move.4 a4, PT_PC(a3) ; Restore pc in register a4
-+ move.4 PT_FRAME_TYPE(a3), #0 ; Clear frame_type to indicate it is invalid.
-+
-+#ifdef CONFIG_PROTECT_KERNEL
-+ call a3, __ret_from_fork_bottom_half
-+ .section .kernel_unprotected, "ax", @progbits
-+__ret_from_fork_bottom_half:
-+ disable_kernel_ranges_for_current d15
-+#endif
-+ atomic_lock_release ; Leave critical section
-+ calli a4, 0(a4) ; Return.
-+
-+/*
-+ * __switch_to()
-+ *
-+ * Call with:
-+ * void *__switch_to(struct task_struct *prev, struct thread_struct *prev_switch,
-+ * struct thread_struct *next_switch)
-+ */
-+ .section .text.__switch_to, "ax", @progbits
-+ .global __switch_to
-+__switch_to:
-+
-+ /*
-+ * Set up register a3 to point to save area.
-+ */
-+ movea a3, d1 ; a3 now holds prev_switch
-+ move.4 (a3)4++, d10
-+ move.4 (a3)4++, d11
-+ move.4 (a3)4++, d12
-+ move.4 (a3)4++, d13
-+ move.4 (a3)4++, a1
-+ move.4 (a3)4++, a2
-+ move.4 (a3)4++, a5
-+ move.4 (a3)4++, a6
-+ move.4 (a3)4++, a7
-+
-+ /*
-+ * Set up register a3 to point to restore area.
-+ */
-+ movea a3, d2 ; a3 now holds next_switch
-+ move.4 d10 , (a3)4++
-+ move.4 d11 , (a3)4++
-+ move.4 d12 , (a3)4++
-+ move.4 d13 , (a3)4++
-+ move.4 a1 , (a3)4++
-+ move.4 a2 , (a3)4++
-+ move.4 a5 , (a3)4++
-+ move.4 a6 , (a3)4++
-+ move.4 a7 , (a3)4++
-+
-+ /*
-+ * Load the sw_ksp with the proper thread_info pointer.
-+ */
-+ movei d15, #(~(ASM_THREAD_SIZE-1))
-+ and.4 a3, sp, d15 ; a3 now has the thread info pointer
-+ moveai a4, #%hi(sw_ksp)
-+ lea.1 a4, %lo(sw_ksp)(a4) ; a4 now has the base address of sw_ksp array
-+ lsr.4 d15, ROSR, #2 ; Thread number - bit's 6 through 31 are zeroes anyway.
-+ move.4 (a4, d15), a3 ; Load the thread info pointer into the hw_ksp array..
-+
-+ /*
-+ * We are done with context switch. Time to return..
-+ */
-+ calli a5, 0(a5)
-+ .size __switch_to, . - __switch_to
-+
-+/*
-+ * ubicom32_emulate_insn()
-+ * Emulates the instruction.
-+ *
-+ * Call with:
-+ * unsigned int ubicom32_emulate_insn(int source1, int source2, int source3, int *save_acc, int *save_csr);
-+ */
-+ .section .text.ubicom32_emulate_insn, "ax", @progbits
-+ .global ubicom32_emulate_insn
-+ .global trap_emulate
-+ubicom32_emulate_insn:
-+ movea a3, d3 ; a3 holds save_acc pointer
-+ movea a4, d4 ; a4 hods save_csr pointer
-+ move.4 source3, d2
-+ move.4 acc0_lo, (a3)
-+ move.4 acc0_hi, 4(a3)
-+ move.4 acc1_lo, 8(a3)
-+ move.4 acc1_hi, 12(a3)
-+ move.4 mac_rc16, 16(a3)
-+ move.4 CSR, (a4)
-+ setcsr_flush 0
-+
-+trap_emulate:
-+ move.4 d0, d1
-+ setcsr_flush 0
-+ move.4 (a4), CSR ; Save csr
-+ move.4 (a3), acc0_lo
-+ move.4 4(a3), acc0_hi
-+ move.4 8(a3), acc1_lo
-+ move.4 12(a3), acc1_hi
-+ move.4 16(a3), mac_rc16
-+ ret a5
-+ .size ubicom32_emulate_insn, . - ubicom32_emulate_insn
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/ubicom32_ksyms.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/ubicom32_ksyms.c
---- linux-2.6.30.10/arch/ubicom32/kernel/ubicom32_ksyms.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/ubicom32_ksyms.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,98 @@
-+/*
-+ * arch/ubicom32/kernel/ubicom32_ksyms.c
-+ * Ubicom32 architecture compiler support and misc symbols.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/linkage.h>
-+#include <linux/sched.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/user.h>
-+#include <linux/elfcore.h>
-+#include <linux/in6.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/semaphore.h>
-+
-+#include <asm/setup.h>
-+#include <asm/machdep.h>
-+#include <asm/pgalloc.h>
-+#include <asm/irq.h>
-+#include <asm/checksum.h>
-+#include <asm/current.h>
-+
-+/* platform dependent support */
-+
-+EXPORT_SYMBOL(__ioremap);
-+EXPORT_SYMBOL(iounmap);
-+
-+EXPORT_SYMBOL(ip_fast_csum);
-+
-+
-+/* Networking helper routines. */
-+EXPORT_SYMBOL(csum_partial_copy_nocheck);
-+
-+/* The following are special because they're not called
-+ explicitly (the C compiler generates them). Fortunately,
-+ their interface isn't gonna change any time soon now, so
-+ it's OK to leave it out of version control. */
-+EXPORT_SYMBOL(memcpy);
-+EXPORT_SYMBOL(memset);
-+EXPORT_SYMBOL(memmove);
-+
-+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 4) || __GNUC__ > 4
-+/*
-+ * libgcc functions - functions that are used internally by the
-+ * compiler... (prototypes are not correct though, but that
-+ * doesn't really matter since they're not versioned).
-+ */
-+extern void __ashldi3(void);
-+extern void __ashrdi3(void);
-+extern void __divsi3(void);
-+extern void __divdi3(void);
-+extern void __lshrdi3(void);
-+extern void __modsi3(void);
-+extern void __muldi3(void);
-+extern void __udivsi3(void);
-+extern void __umodsi3(void);
-+
-+/* gcc lib functions */
-+EXPORT_SYMBOL(__ashldi3);
-+EXPORT_SYMBOL(__ashrdi3);
-+EXPORT_SYMBOL(__divsi3);
-+EXPORT_SYMBOL(__divdi3);
-+EXPORT_SYMBOL(__lshrdi3);
-+EXPORT_SYMBOL(__modsi3);
-+EXPORT_SYMBOL(__muldi3);
-+EXPORT_SYMBOL(__udivsi3);
-+EXPORT_SYMBOL(__umodsi3);
-+#else
-+extern void __libgcc_udivmodsi(void);
-+extern void __libgcc_divmodsi(void);
-+
-+EXPORT_SYMBOL(__libgcc_udivmodsi);
-+EXPORT_SYMBOL(__libgcc_divmodsi);
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/ubicom32_syscall.S linux-2.6.30.10-ubi/arch/ubicom32/kernel/ubicom32_syscall.S
---- linux-2.6.30.10/arch/ubicom32/kernel/ubicom32_syscall.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/ubicom32_syscall.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,694 @@
-+/*
-+ * arch/ubicom32/kernel/ubicom32_syscall.S
-+ * <TODO: Replace with short file description>
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/sys.h>
-+#include <linux/linkage.h>
-+#include <linux/unistd.h>
-+
-+#include <asm/ubicom32-common.h>
-+#include <asm/thread_info.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/range-protect.h>
-+
-+/*
-+ * __old_system_call()
-+ */
-+ .section .old_syscall_entry.text, "ax", @progbits
-+#ifdef CONFIG_OLD_40400010_SYSTEM_CALL
-+__old_system_call:
-+ call a3, system_call
-+ .size __old_system_call, . - __old_system_call ;
-+#else
-+ /*
-+ * something that will crash the userspace application, but
-+ * should not take down the kernel, if protection is enabled
-+ * this will never even get executed.
-+ */
-+ .long 0xFABBCCDE ; illegal instruction
-+ bkpt #-1 ; we will never get here
-+#endif
-+
-+/*
-+ * system_call()
-+ */
-+ .section .syscall_entry.text, "ax", @progbits
-+ .global system_call
-+system_call:
-+ /*
-+ * Regular ABI rules for function calls apply for syscall. d8 holds
-+ * the syscall number. We will use that to index into the syscall table.
-+ * d0 - d5 hold the parameters.
-+ *
-+ * First we get the current thread_info and swap to the kernel stack.
-+ * This is done by reading the current thread and looking up the ksp
-+ * from the sw_ksp array and storing it in a3.
-+ *
-+ * Then we reserve space for the syscall context a struct pt_regs and
-+ * save it using a4 initially and later as sp.
-+ * Once sp is set to the kernel sp we can leave the critical section.
-+ *
-+ * For the user case the kernel stack will have the following layout.
-+ *
-+ * a3 ksp[0] +-----------------------+
-+ * | Thread info area |
-+ * | struct thread_info |
-+ * +-----------------------+
-+ * : :
-+ * | Kernel Stack Area |
-+ * | |
-+ * a4 / sp >>> +-----------------------+
-+ * | Context save area |
-+ * | struct pt_reg |
-+ * ksp[THREAD_SIZE-8] +-----------------------+
-+ * | 8 Byte Buffer Zone |
-+ * ksp[THREAD_SIZE] +-----------------------+
-+
-+ *
-+ * For kernel syscalls the layout is as follows.
-+ *
-+ * a3 ksp[0] +-----------------------+
-+ * | Thread info area |
-+ * | struct thread_info |
-+ * +-----------------------+
-+ * : :
-+ * | Kernel Stack Area |
-+ * | |
-+ * a4 / sp >>> +-----------------------+
-+ * | Context save area |
-+ * | struct pt_reg |
-+ * sp at syscall entry +-----------------------+
-+ * | Callers Kernel Stack |
-+ * : :
-+ *
-+ * Once the context is saved we optionally call syscall_trace and setup
-+ * the exit routine and jump to the syscall.
-+ */
-+
-+ /*
-+ * load the base address for sw_ksp into a3
-+ * Note.. we cannot access it just yet as protection is still on.
-+ */
-+ moveai a3, #%hi(sw_ksp)
-+ lea.1 a3, %lo(sw_ksp)(a3)
-+
-+ /*
-+ * Enter critical section .
-+ *
-+ * The 'critical' aspects here are the switching the to the ksp and
-+ * changing the protection registers, these both use per thread
-+ * information so we need to protect from a context switch. For now this
-+ * is done using the global atomic lock.
-+ */
-+ atomic_lock_acquire
-+
-+ thread_get_self d15 ; Load current thread number
-+#ifdef CONFIG_PROTECT_KERNEL
-+ lsl.4 d9, #1, d15 ; Convert to thread bit
-+ enable_kernel_ranges d9
-+#endif
-+ /*
-+ * in order to reduce the size of code in the syscall section we get
-+ * out of it right now
-+ */
-+ call a4, __system_call_bottom_half
-+ .size system_call, . - system_call
-+
-+ .section .text.__system_call_bottom_half, "ax", @progbits
-+__system_call_bottom_half:
-+
-+ /*
-+ * We need to Determine if this is a kernel syscall or user syscall.
-+ * Start by loading the pointer for the thread_info structure for the
-+ * current process in to a3.
-+ */
-+ move.4 a3, (a3, d15) ; a3 = sw_ksp[d15]
-+
-+ /*
-+ * Now if this is a kernel thread the same value can be a acheived by
-+ * masking off the lower bits on the current stack pointer.
-+ */
-+ movei d9, #(~(ASM_THREAD_SIZE-1)) ; load mask
-+ and.4 d9, sp, d9 ; apply mask
-+
-+ /*
-+ * d9 now has the masked version of the sp. If this is identical to
-+ * what is in a3 then don't switch to ksp as we are already in the
-+ * kernel.
-+ */
-+ sub.4 #0, a3, d9
-+
-+ /*
-+ * if d9 and a3 are not equal. We are usespace and have to shift to
-+ * ksp.
-+ */
-+ jmpne.t 1f
-+
-+ /*
-+ * Kernel Syscall.
-+ *
-+ * The kernel has called this routine. We have to pdec space for pt_regs
-+ * from sp.
-+ */
-+ pdec a4, PT_SIZE(sp) ; a4 = ksp - PT_SIZE
-+ jmpt.t 2f
-+
-+ /*
-+ * Userspace Syscall.
-+ *
-+ * Add THREAD_SIZE and subtract PT_SIZE to create the proper ksp
-+ */
-+1: movei d15, #(ASM_THREAD_SIZE - 8 - PT_SIZE)
-+ lea.1 a4, (a3, d15) ; a4 = ksp + d15
-+
-+ /*
-+ * Replace user stack pointer with kernel stack pointer (a4)
-+ * Load -1 into frame_type in save area to indicate this is system call
-+ * frame.
-+ */
-+2: move.4 PT_A7(a4), a7 ; Save old sp/A7 on kernel stack
-+ move.4 PT_FRAME_TYPE(a4), #-1 ; Set the frame type.
-+ move.4 sp, a4 ; Change to ksp.
-+ /*
-+ * We are now officially back in the kernel!
-+ */
-+
-+ /*
-+ * Now that we are on the ksp we can leave the critical section
-+ */
-+ atomic_lock_release
-+
-+ /*
-+ * We need to save a0 because we need to be able to restore it in
-+ * the event that we need to handle a signal. It's not generally
-+ * a callee-saved register but is the GOT pointer.
-+ */
-+ move.4 PT_A0(sp), a0 ; Save A0 on kernel stack
-+
-+ /*
-+ * We still need to save d10-d13, a1, a2, a5, a6 in the kernel frame
-+ * for this process, we also save the system call params in the case of
-+ * syscall restart. (note a7 was saved above)
-+ */
-+ move.4 PT_A1(sp), a1 ; Save A1 on kernel stack
-+ move.4 PT_A2(sp), a2 ; Save A2 on kernel stack
-+ move.4 PT_A5(sp), a5 ; Save A5 on kernel stack
-+ move.4 PT_A6(sp), a6 ; Save A6 on kernel stack
-+ move.4 PT_PC(sp), a5 ; Save A5 at the PC location
-+ move.4 PT_D10(sp), d10 ; Save D10 on kernel stack
-+ move.4 PT_D11(sp), d11 ; Save D11 on kernel stack
-+ move.4 PT_D12(sp), d12 ; Save D12 on kernel stack
-+ move.4 PT_D13(sp), d13 ; Save D13 on kernel stack
-+
-+ /*
-+ * Now save the syscall parameters
-+ */
-+ move.4 PT_D0(sp), d0 ; Save d0 on kernel stack
-+ move.4 PT_ORIGINAL_D0(sp), d0 ; Save d0 on kernel stack
-+ move.4 PT_D1(sp), d1 ; Save d1 on kernel stack
-+ move.4 PT_D2(sp), d2 ; Save d2 on kernel stack
-+ move.4 PT_D3(sp), d3 ; Save d3 on kernel stack
-+ move.4 PT_D4(sp), d4 ; Save d4 on kernel stack
-+ move.4 PT_D5(sp), d5 ; Save d5 on kernel stack
-+ move.4 PT_D8(sp), d8 ; Save d8 on kernel stack
-+
-+ /*
-+ * Test if syscalls are being traced and if they are jump to syscall
-+ * trace (it will comeback here)
-+ */
-+ btst TI_FLAGS(a3), #ASM_TIF_SYSCALL_TRACE
-+ jmpne.f .Lsystem_call__trace
-+.Lsystem_call__trace_complete:
-+ /*
-+ * Check for a valid call number [ 0 <= syscall_number < NR_syscalls ]
-+ */
-+ cmpi d8, #0
-+ jmplt.f 3f
-+ cmpi d8, #NR_syscalls
-+ jmplt.t 4f
-+
-+ /*
-+ * They have passed an invalid number. Call sys_ni_syscall staring by
-+ * load a4 with the base address of sys_ni_syscall
-+ */
-+3: moveai a4, #%hi(sys_ni_syscall)
-+ lea.1 a4, %lo(sys_ni_syscall)(a4)
-+ jmpt.t 5f ; Jump to regular processing
-+
-+ /*
-+ * Validated syscall, load the syscall table base address into a3 and
-+ * read the syscall ptr out.
-+ */
-+4: moveai a3, #%hi(sys_call_table)
-+ lea.1 a3, %lo(sys_call_table)(a3) ; a3 = sys_call_table
-+ move.4 a4, (a3, d8) ; a4 = sys_call_table[d8]
-+
-+ /*
-+ * Before calling the syscall, setup a5 so that syscall_exit is called
-+ * on return from syscall
-+ */
-+5: moveai a5, #%hi(syscall_exit) ; Setup return address
-+ lea.1 a5, %lo(syscall_exit)(a5) ; from system call
-+
-+ /*
-+ * If the syscall is __NR_rt_rigreturn then we have to test d1 to
-+ * figure out if we have to change change the return routine to restore
-+ * all registers.
-+ */
-+ cmpi d8, #__NR_rt_sigreturn
-+ jmpeq.f 6f
-+
-+ /*
-+ * Launch system call (it will return through a5 - syscall_exit)
-+ */
-+ calli a3, 0(a4)
-+
-+ /*
-+ * System call is rt_sigreturn. Test d1. If it is 1 we have to
-+ * change the return address to restore_all_registers
-+ */
-+6: cmpi d1, #1
-+ jmpne.t 7f
-+
-+ moveai a5, #%hi(restore_all_registers) ; Setup return address
-+ lea.1 a5, %lo(restore_all_registers)(a5) ; to restore_all_registers.
-+
-+ /*
-+ * Launch system call (it will return through a5)
-+ */
-+7: calli a3, 0(a4) ; Launch system call
-+
-+.Lsystem_call__trace:
-+ /*
-+ * Syscalls are being traced.
-+ * Call syscall_trace, (return here)
-+ */
-+ call a5, syscall_trace
-+
-+ /*
-+ * Restore syscall state (it would have been discarded during the
-+ * syscall trace)
-+ */
-+ move.4 d0, PT_D0(sp) ; Restore d0 from kernel stack
-+ move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack
-+ move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack
-+ move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack
-+ move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack
-+ move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack
-+ /* add this back if we ever have a syscall with 7 args */
-+ move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack
-+
-+ /*
-+ * return to syscall
-+ */
-+ jmpt.t .Lsystem_call__trace_complete
-+ .size __system_call_bottom_half, . - __system_call_bottom_half
-+
-+/*
-+ * syscall_exit()
-+ */
-+ .section .text.syscall_exit
-+ .global syscall_exit
-+syscall_exit:
-+ /*
-+ * d0 contains the return value. We should move that into the kernel
-+ * stack d0 location. We will be transitioning from kernel to user
-+ * mode. Test the flags and see if we have to call schedule. If we are
-+ * going to truly exit then all that has to be done is that from the
-+ * kernel stack we have to restore d0, a0, a1, a2, a5, a6 and sp (a7)bb
-+ * and then return via a5.
-+ */
-+
-+ /*
-+ * Save d0 to pt_regs
-+ */
-+ move.4 PT_D0(sp), d0 ; Save d0 into the kernel stack
-+
-+ /*
-+ * load the thread_info structure by masking off the THREAD_SIZE
-+ * bits.
-+ *
-+ * Note: we used to push a1, but now we don't as we are going
-+ * to eventually restore it to the userspace a1.
-+ */
-+ movei d9, #(~(ASM_THREAD_SIZE-1))
-+ and.4 a1, sp, d9
-+
-+ /*
-+ * Are any interesting bits set on TI flags, if there are jump
-+ * aside to post_processing.
-+ */
-+ move.4 d9, #(_TIF_SYSCALL_TRACE | _TIF_NEED_RESCHED | _TIF_SIGPENDING)
-+ and.4 #0, TI_FLAGS(a1), d9
-+ jmpne.f .Lsyscall_exit__post_processing ; jump to handler
-+.Lsyscall_exit__post_processing_complete:
-+
-+ move.4 d0, PT_D0(sp) ; Restore D0 from kernel stack
-+ move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack
-+ move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack
-+ move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack
-+ move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack
-+ move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack
-+ move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack
-+ move.4 d10, PT_D10(sp) ; Restore d10 from kernel stack
-+ move.4 d11, PT_D11(sp) ; Restore d11 from kernel stack
-+ move.4 d12, PT_D12(sp) ; Restore d12 from kernel stack
-+ move.4 d13, PT_D13(sp) ; Restore d13 from kernel stack
-+ move.4 a1, PT_A1(sp) ; Restore A1 from kernel stack
-+ move.4 a2, PT_A2(sp) ; Restore A2 from kernel stack
-+ move.4 a5, PT_A5(sp) ; Restore A5 from kernel stack
-+ move.4 a6, PT_A6(sp) ; Restore A6 from kernel stack
-+ move.4 a0, PT_A0(sp) ; Restore A6 from kernel stack
-+
-+ /*
-+ * this is only for debug, and could be removed for production builds
-+ */
-+ move.4 PT_FRAME_TYPE(sp), #0 ; invalidate frame_type
-+
-+#ifdef CONFIG_PROTECT_KERNEL
-+
-+ call a4, __syscall_exit_bottom_half
-+
-+ .section .kernel_unprotected, "ax", @progbits
-+__syscall_exit_bottom_half:
-+ /*
-+ * Enter critical section
-+ */
-+ atomic_lock_acquire
-+ disable_kernel_ranges_for_current d15
-+#endif
-+ /*
-+ * Lastly restore userspace stack ptr
-+ *
-+ * Note: that when protection is on we need to hold the lock around the
-+ * stack swap as well because otherwise the protection could get
-+ * inadvertently disabled again at the end of a context switch.
-+ */
-+ move.4 a7, PT_A7(sp) ; Restore A7 from kernel stack
-+
-+ /*
-+ * We are now officially back in userspace!
-+ */
-+
-+#ifdef CONFIG_PROTECT_KERNEL
-+ /*
-+ * Leave critical section and return to user space.
-+ */
-+ atomic_lock_release
-+#endif
-+ calli a5, 0(a5) ; Back to userspace code.
-+
-+ bkpt #-1 ; we will never get here
-+
-+ /*
-+ * Post syscall processing. (unlikely part of syscall_exit)
-+ *
-+ * Are we tracing syscalls. If TIF_SYSCALL_TRACE is set, call
-+ * syscall_trace routine and return here.
-+ */
-+ .section .text.syscall_exit, "ax", @progbits
-+.Lsyscall_exit__post_processing:
-+ btst TI_FLAGS(a1), #ASM_TIF_SYSCALL_TRACE
-+ jmpeq.t 1f
-+ call a5, syscall_trace
-+
-+ /*
-+ * Do we need to resched ie call schedule. If TIF_NEED_RESCHED is set,
-+ * call the scheduler, it will come back here.
-+ */
-+1: btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED
-+ jmpeq.t 2f
-+ call a5, schedule
-+
-+ /*
-+ * Do we need to post a signal, if TIF_SIGPENDING is set call the
-+ * do_signal.
-+ */
-+2: btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING
-+ jmpeq.t .Lsyscall_exit__post_processing_complete
-+
-+ /*
-+ * setup the do signal call
-+ */
-+ move.4 d0, #0 ; oldset pointer is NULL
-+ lea.1 d1, (sp) ; d1 is the regs pointer.
-+ call a5, do_signal
-+
-+ jmpt.t .Lsyscall_exit__post_processing_complete
-+
-+/* .size syscall_exit, . - syscall_exit */
-+
-+/*
-+ * kernel_execve()
-+ * kernel_execv is called when we the kernel is starting a
-+ * userspace application.
-+ */
-+ .section .kernel_unprotected, "ax", @progbits
-+ .global kernel_execve
-+kernel_execve:
-+ move.4 -4(sp)++, a5 ; Save return address
-+ /*
-+ * Call execve
-+ */
-+ movei d8, #__NR_execve ; call execve
-+ call a5, system_call
-+ move.4 a5, (sp)4++
-+
-+ /*
-+ * protection was enabled again at syscall exit, but we want
-+ * to return to kernel so we enable it again.
-+ */
-+#ifdef CONFIG_PROTECT_KERNEL
-+ /*
-+ * We are entering the kernel so we need to disable the protection.
-+ * Enter critical section, disable ranges and leave critical section.
-+ */
-+ call a3, __enable_kernel_ranges ; and jump back to kernel
-+#else
-+ ret a5 ; jump back to the kernel
-+#endif
-+
-+ .size kernel_execve, . - kernel_execve
-+
-+/*
-+ * signal_trampoline()
-+ *
-+ * Deals with transitioning from to userspace signal handlers and returning
-+ * to userspace, only called from the kernel.
-+ *
-+ */
-+ .section .kernel_unprotected, "ax", @progbits
-+ .global signal_trampoline
-+signal_trampoline:
-+ /*
-+ * signal_trampoline is called when we are jumping from the kernel to
-+ * the userspace signal handler.
-+ *
-+ * The following registers are relevant. (set setup_rt_frame)
-+ * sp is the user space stack not the kernel stack
-+ * d0 = signal number
-+ * d1 = siginfo_t *
-+ * d2 = ucontext *
-+ * d3 = the user space signal handler
-+ * a0 is set to the GOT if userspace application is FDPIC, otherwise 0
-+ * a3 is set to the FD for the signal if userspace application is FDPIC
-+ */
-+#ifdef CONFIG_PROTECT_KERNEL
-+ /*
-+ * We are leaving the kernel so we need to enable the protection.
-+ * Enter critical section, disable ranges and leave critical section.
-+ */
-+ atomic_lock_acquire ; Enter critical section
-+ disable_kernel_ranges_for_current d15 ; disable kernel ranges
-+ atomic_lock_release ; Leave critical section
-+#endif
-+ /*
-+ * The signal handler pointer is in register d3 so tranfer it to a4 and
-+ * call it
-+ */
-+ movea a4, d3 ; signal handler
-+ calli a5, 0(a4)
-+
-+ /*
-+ * Return to userspace through rt_syscall which is stored on top of the
-+ * stack d1 contains ret_via_interrupt status.
-+ */
-+ move.4 d8, (sp) ; d8 (syscall #) = rt_syscall
-+ move.4 d1, 4(sp) ; d1 = ret_via_interrupt
-+ call a5, system_call ; as we are 'in' the kernel
-+ ; we can call kernel_syscall
-+
-+ bkpt #-1 ; will never get here.
-+ .size signal_trampoline, . - signal_trampoline
-+
-+/*
-+ * kernel_thread_helper()
-+ *
-+ * Entry point for kernel threads (only referenced by kernel_thread()).
-+ *
-+ * On execution d0 will be 0, d1 will be the argument to be passed to the
-+ * kernel function.
-+ * d2 contains the kernel function that needs to get called.
-+ * d3 will contain address to do_exit which needs to get moved into a5.
-+ *
-+ * On return from fork the child thread d0 will be 0. We call this dummy
-+ * function which in turn loads the argument
-+ */
-+ .section .kernel_unprotected, "ax", @progbits
-+ .global kernel_thread_helper
-+kernel_thread_helper:
-+ /*
-+ * Create a kernel thread. This is called from ret_from_vfork (a
-+ * userspace return routine) so we need to put it in an unprotected
-+ * section and re-enable protection before calling the vector in d2.
-+ */
-+
-+#ifdef CONFIG_PROTECT_KERNEL
-+ /*
-+ * We are entering the kernel so we need to disable the protection.
-+ * Enter critical section, disable ranges and leave critical section.
-+ */
-+ call a5, __enable_kernel_ranges
-+#endif
-+ /*
-+ * Move argument for kernel function into d0, and set a5 return address
-+ * (a5) to do_exit and return through a2
-+ */
-+ move.4 d0, d1 ; d0 = arg
-+ move.4 a5, d3 ; a5 = do_exit
-+ ret d2 ; call function ptr in d2
-+ .size kernel_thread_helper, . - kernel_thread_helper
-+
-+#ifdef CONFIG_PROTECT_KERNEL
-+ .section .kernel_unprotected, "ax", @progbits
-+__enable_kernel_ranges:
-+ atomic_lock_acquire ; Enter critical section
-+ enable_kernel_ranges_for_current d15
-+ atomic_lock_release ; Leave critical section
-+ calli a5, 0(a5)
-+ .size __enable_kernel_ranges, . - __enable_kernel_ranges
-+
-+#endif
-+
-+/*
-+ * The following system call intercept functions where we setup the
-+ * input to the real system call. In all cases these are just taking
-+ * the current sp which is pointing to pt_regs and pushing it into the
-+ * last arg of the system call.
-+ *
-+ * i.e. the public definition of sys_execv is
-+ * sys_execve( char *name,
-+ * char **argv,
-+ * char **envp )
-+ * but process.c defines it as
-+ * sys_execve( char *name,
-+ * char **argv,
-+ * char **envp,
-+ * struct pt_regs *regs )
-+ *
-+ * so execve_intercept needs to populate the 4th arg with pt_regs*,
-+ * which is the stack pointer as we know we must be coming out of
-+ * system_call
-+ *
-+ * The intercept vectors are referenced by syscalltable.S
-+ */
-+
-+/*
-+ * execve_intercept()
-+ */
-+ .section .text.execve_intercept, "ax", @progbits
-+ .global execve_intercept
-+execve_intercept:
-+ move.4 d3, sp ; Save pt_regs address
-+ call a3, sys_execve
-+
-+ .size execve_intercept, . - execve_intercept
-+
-+/*
-+ * vfork_intercept()
-+ */
-+ .section .text.vfork_intercept, "ax", @progbits
-+ .global vfork_intercept
-+vfork_intercept:
-+ move.4 d0, sp ; Save pt_regs address
-+ call a3, sys_vfork
-+
-+ .size vfork_intercept, . - vfork_intercept
-+
-+/*
-+ * clone_intercept()
-+ */
-+ .section .text.clone_intercept, "ax", @progbits
-+ .global clone_intercept
-+clone_intercept:
-+ move.4 d2, sp ; Save pt_regs address
-+ call a3, sys_clone
-+
-+ .size clone_intercept, . - clone_intercept
-+
-+/*
-+ * sys_sigsuspend()
-+ */
-+ .section .text.sigclone_intercept, "ax", @progbits
-+ .global sys_sigsuspend
-+sys_sigsuspend:
-+ move.4 d0, sp ; Pass pointer to pt_regs in d0
-+ call a3, do_sigsuspend
-+
-+ .size sys_sigsuspend, . - sys_sigsuspend
-+
-+/*
-+ * sys_rt_sigsuspend()
-+ */
-+ .section .text.sys_rt_sigsuspend, "ax", @progbits
-+ .global sys_rt_sigsuspend
-+sys_rt_sigsuspend:
-+ move.4 d0, sp ; Pass pointer to pt_regs in d0
-+ call a3, do_rt_sigsuspend
-+
-+ .size sys_rt_sigsuspend, . - sys_rt_sigsuspend
-+
-+/*
-+ * sys_rt_sigreturn()
-+ */
-+ .section .text.sys_rt_sigreturn, "ax", @progbits
-+ .global sys_rt_sigreturn
-+sys_rt_sigreturn:
-+ move.4 d0, sp ; Pass pointer to pt_regs in d0
-+ call a3, do_rt_sigreturn
-+
-+ .size sys_rt_sigreturn, . - sys_rt_sigreturn
-+
-+/*
-+ * sys_sigaltstack()
-+ */
-+ .section .text.sys_sigaltstack, "ax", @progbits
-+ .global sys_sigaltstack
-+sys_sigaltstack:
-+ move.4 d0, sp ; Pass pointer to pt_regs in d0
-+ call a3, do_sys_sigaltstack
-+
-+ .size sys_sigaltstack, . - sys_sigaltstack
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/unaligned_trap.c linux-2.6.30.10-ubi/arch/ubicom32/kernel/unaligned_trap.c
---- linux-2.6.30.10/arch/ubicom32/kernel/unaligned_trap.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/unaligned_trap.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,698 @@
-+/*
-+ * arch/ubicom32/kernel/unaligned_trap.c
-+ * Handle unaligned traps in both user or kernel space.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/cacheflush.h>
-+#include <asm/traps.h>
-+
-+#define FALSE 0
-+#define TRUE 1
-+
-+/* no possible trap */
-+#define UNUSED 0
-+/* possible source operand trap */
-+#define SRC 1
-+#define SRC_2 2
-+/* possible destination operand trap */
-+#define DEST 3
-+#define DEST_2 4
-+/* can be either source or destination or both */
-+#define TWO_OP 5
-+#define TWO_OP_2 6
-+
-+/* TODO: What is the real value here, put something in to make it compile for
-+ * now */
-+#define MOVE_2 0x0d
-+#define LSL_2 0x11
-+#define LSR_2 0x13
-+#define MOVEI 0x19
-+#define CMPI 0x18
-+
-+static int op_format[32] =
-+{
-+ TWO_OP, /* 0x00 */
-+ UNUSED,
-+ SRC,
-+ UNUSED,
-+ TWO_OP, /* 0x04 */
-+ TWO_OP,
-+ SRC,
-+ UNUSED,
-+ TWO_OP_2, /* 0x08 */
-+ TWO_OP,
-+ TWO_OP_2,
-+ TWO_OP,
-+ TWO_OP_2, /* 0x0C */
-+ TWO_OP,
-+ TWO_OP_2,
-+ TWO_OP,
-+ TWO_OP, /* 0x10 */
-+ TWO_OP_2,
-+ TWO_OP,
-+ TWO_OP,
-+ UNUSED, /* 0x14 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ SRC_2, /* 0x18 */
-+ DEST_2,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x1C */
-+ UNUSED,
-+ UNUSED, /* unaligned CALLI will not be fixed. */
-+ UNUSED
-+};
-+
-+static int op_0_format[32] =
-+{
-+ UNUSED, /* 0x00 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x04 - ret don't fix - bad ret is always wrong */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x08 */
-+ UNUSED,
-+ TWO_OP,
-+ TWO_OP_2,
-+ TWO_OP, /* 0x0c */
-+ TWO_OP_2,
-+ TWO_OP,
-+ UNUSED, /* .1 can't trap */
-+ UNUSED, /* 0x10 */
-+ UNUSED,
-+ SRC,
-+ UNUSED,
-+ UNUSED, /* 0x14 */
-+ TWO_OP_2,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x18 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ DEST, /* 0x1c */
-+ DEST,
-+ DEST,
-+ DEST, /* all lea have 32-bit destination */
-+};
-+
-+static int op_2_format[32] =
-+{
-+ UNUSED, /* 0x00 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x04 */
-+ UNUSED,
-+ SRC,
-+ UNUSED,
-+ UNUSED, /* 0x08 crcgen is .1 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x0c */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ SRC, /* 0x10 */
-+ SRC_2,
-+ SRC,
-+ SRC_2,
-+ SRC, /* 0x14 */
-+ SRC_2,
-+ SRC,
-+ UNUSED,
-+ UNUSED, /* 0x18 */
-+ UNUSED,
-+ SRC,
-+ UNUSED,
-+ SRC, /* 0x1c */
-+ UNUSED,
-+ SRC_2,
-+ UNUSED,
-+};
-+
-+static int op_6_format[32] =
-+{
-+ SRC_2, /* 0x00 */
-+ SRC_2,
-+ SRC_2,
-+ SRC_2,
-+ SRC_2, /* 0x04 */
-+ SRC_2,
-+ UNUSED,
-+ SRC_2,
-+ SRC, /* 0x08 MULS.4 */
-+ SRC_2,
-+ SRC,
-+ UNUSED,
-+ UNUSED, /* 0x0c */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ SRC, /* 0x10 */
-+ SRC_2,
-+ SRC,
-+ SRC_2,
-+ UNUSED, /* 0x14 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x18 */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+ UNUSED, /* 0x1c */
-+ UNUSED,
-+ UNUSED,
-+ UNUSED,
-+};
-+
-+/*
-+ * unaligned_get_address()
-+ * get an address using save_an and save_dn registers, and updates save_an
-+ * with side effects
-+ */
-+unsigned char *unaligned_get_address(int thread, int specifier, int four_byte,
-+ unsigned int save_an[],
-+ unsigned int save_dn[], int *write_back_an)
-+{
-+ unsigned char *address;
-+
-+ int areg = (specifier >> 5) & 7;
-+ if ((specifier >> 8) == 2) {
-+ int offset = specifier & 0xf;
-+ offset = ((offset << 28) >> 28);
-+ if (likely(four_byte)) {
-+ offset <<= 2;
-+ } else {
-+ offset <<= 1;
-+ }
-+ if (specifier & 0x10) {
-+ address = (unsigned char *)(save_an[areg] + offset);
-+ } else {
-+ address = (unsigned char *)save_an[areg];
-+ }
-+ save_an[areg] = save_an[areg] + offset;
-+
-+ /*
-+ * Let caller know An registers have been modified.
-+ */
-+ *write_back_an = 1;
-+ } else if ((specifier >> 8) == 3) {
-+ int dreg = specifier & 0xf;
-+ if (likely(four_byte)) {
-+ address = (unsigned char *)(save_an[areg] +
-+ (save_dn[dreg] << 2));
-+ } else {
-+ address = (unsigned char *)(save_an[areg] +
-+ (save_dn[dreg] << 1));
-+ }
-+ } else {
-+ int offset = ((specifier >> 3) & 0x60) | (specifier & 0x1f);
-+ if (likely(four_byte)) {
-+ address = (unsigned char *)(save_an[areg] +
-+ (offset << 2));
-+ } else {
-+ address = (unsigned char *)(save_an[areg] +
-+ (offset << 1));
-+ }
-+ }
-+
-+ return address;
-+}
-+
-+static int save_dn[16];
-+static int save_an[8];
-+static int save_acc[5];
-+
-+/*
-+ * unaligned_emulate()
-+ * emulate the instruction at thread's pc that has taken an unaligned data
-+ * trap.
-+ *
-+ * source or destination or both might be unaligned
-+ * the instruction must have a memory source or destination or both
-+ * the emulated instruction is copied and executed in this thread
-+ *
-+ * TODO: Protection is handled outside of this function
-+ * TODO: handling simultaneous unaligned and memory protection traps
-+ *
-+ * Get thread state
-+ * the PC and instruction (and local copy, emulate_inst), and An
-+ * and Dn registers
-+ * All implicit soruce state (source3, CSR, accumulators)
-+
-+ * if the instruction has a memory source
-+ * Use the instruction, An and Dn registers to form src_address
-+ * get unaligned source data from src_address (usually sign
-+ * extended)
-+ * (2 bytes, with or without sign extension, or 4 bytes)
-+ * modify emulate_inst to use d0 as source
-+ * else
-+ * get the soure operand from one of thread's registers
-+ * if instruction has a memory destination
-+ * Use the instruction, An and Dn registers to form dest_address
-+ * modify emulate_inst to use d0 as destination
-+ * if there was a memory source
-+ * put the source data in thread's d0
-+ * get the source-2 Dn operand and source 3 operand from thread
-+ * execute modified inst
-+ * (save it, flush caches, set up local values for implicit
-+ * sources, execute, save explicit and implicit results)
-+ * if inst has destination address
-+ * copy result to dest_address, possibly unaligned, 1, 2, or 4
-+ * bytes
-+ * restore thread's implicit results (modified address registers, CSR,
-+ * accumulators) add 4 to thread's pc
-+ */
-+void unaligned_emulate(unsigned int thread)
-+{
-+ unsigned int pc;
-+ unsigned int inst;
-+ unsigned int op;
-+ unsigned int subop;
-+ int format;
-+ unsigned int emulate_inst;
-+ int four_byte;
-+ int src_operand, dest_operand;
-+ int save_csr;
-+ int source3;
-+ unsigned int source1;
-+ unsigned int source_data;
-+ unsigned char *dest_address = NULL;
-+ int source2 = 0;
-+ unsigned int result;
-+ unsigned int write_back_an = 0;
-+ unsigned int chip_id_copy;
-+
-+ extern unsigned int trap_emulate;
-+ extern unsigned int ubicom32_emulate_insn(int source1, int source2,
-+ int source3, int *save_acc,
-+ int *save_csr);
-+
-+ /*
-+ * get the chip_id
-+ */
-+ asm volatile (
-+ " move.4 %0, chip_id \n\t" /* get chip_id. */
-+ : "=r"(chip_id_copy)
-+ :
-+ );
-+
-+ /*
-+ * get the pc
-+ */
-+ asm volatile (
-+ " move.4 CSR, %1 \n\t" /* set source thread in
-+ * CSR */
-+ " setcsr_flush 0 \n\t"
-+ " move.4 %0, pc \n\t"
-+ " move.4 CSR, #0 \n\t" /* restore CSR */
-+ " setcsr_flush 0 \n\t"
-+ : "=a"(pc)
-+ : "d" ((1 << 8) | (thread << 9))
-+ : "cc"
-+ );
-+
-+ inst = *((unsigned int *)pc);
-+ op = inst >> 27;
-+ if (unlikely(op == 2 || op == 6)) {
-+ subop = (inst >> 21) & 0x1f;
-+ } else {
-+ subop = (inst >> 11) & 0x1f;
-+ }
-+ format = op_format[op];
-+ emulate_inst = inst;
-+
-+ if (op == 0) {
-+ format = op_0_format[subop];
-+ } else if (op == 2) {
-+ format = op_2_format[subop];
-+ } else if (op == 6) {
-+ format = op_6_format[subop];
-+ }
-+
-+ if (unlikely(format == UNUSED)) {
-+ /*
-+ * We are not going to emulate this. Bump PC by 4 and move on.
-+ */
-+ asm volatile (
-+ " move.4 CSR, %0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 pc, %1 \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ :
-+ : "d"((1 << 14) | (thread << 15)), "d"(pc + 4)
-+ : "cc"
-+ );
-+ return;
-+ }
-+
-+ four_byte = (format == TWO_OP || format == DEST || format == SRC);
-+
-+ /*
-+ * source or destination memory operand needs emulation
-+ */
-+ src_operand = (format == SRC ||
-+ format == SRC_2 ||
-+ format == TWO_OP ||
-+ format == TWO_OP_2) &&
-+ ((inst >> 8) & 7) > 1;
-+
-+ dest_operand = (format == DEST ||
-+ format == DEST_2 ||
-+ format == TWO_OP ||
-+ format == TWO_OP_2) &&
-+ ((inst >> 24) & 7) > 1;
-+
-+ /*
-+ * get thread's implicit sources (not covered by source context select).
-+ * data and address registers and CSR (for flag bits) and src3 and
-+ * accumulators
-+ */
-+ asm volatile (
-+ " move.4 CSR, %2 \n\t" /* set source thread in
-+ * CSR */
-+ " setcsr_flush 0 \n\t"
-+ " move.4 (%3), d0 \n\t" /* get dn registers */
-+ " move.4 4(%3), d1 \n\t"
-+ " move.4 8(%3), d2 \n\t"
-+ " move.4 12(%3), d3 \n\t"
-+ " move.4 16(%3), d4 \n\t"
-+ " move.4 20(%3), d5 \n\t"
-+ " move.4 24(%3), d6 \n\t"
-+ " move.4 28(%3), d7 \n\t"
-+ " move.4 32(%3), d8 \n\t"
-+ " move.4 36(%3), d9 \n\t"
-+ " move.4 40(%3), d10 \n\t"
-+ " move.4 44(%3), d11 \n\t"
-+ " move.4 48(%3), d12 \n\t"
-+ " move.4 52(%3), d13 \n\t"
-+ " move.4 56(%3), d14 \n\t"
-+ " move.4 60(%3), d15 \n\t"
-+ " move.4 (%4), a0 \n\t" /* get an registers */
-+ " move.4 4(%4), a1 \n\t"
-+ " move.4 8(%4), a2 \n\t"
-+ " move.4 12(%4), a3 \n\t"
-+ " move.4 16(%4), a4 \n\t"
-+ " move.4 20(%4), a5 \n\t"
-+ " move.4 24(%4), a6 \n\t"
-+ " move.4 28(%4), a7 \n\t"
-+ " move.4 %0, CSR \n\t" /* get csr and source3
-+ * implicit operands */
-+ " move.4 %1, source3 \n\t"
-+ " move.4 (%5), acc0_lo \n\t" /* get accumulators */
-+ " move.4 4(%5), acc0_hi \n\t"
-+ " move.4 8(%5), acc1_lo \n\t"
-+ " move.4 12(%5), acc1_hi \n\t"
-+ " move.4 16(%5), mac_rc16 \n\t"
-+ " move.4 CSR, #0 \n\t" /* restore CSR */
-+ " setcsr_flush 0 \n\t"
-+ : "=m"(save_csr), "=m"(source3)
-+ : "d"((1 << 8) | (thread << 9)),
-+ "a"(save_dn), "a"(save_an), "a"(save_acc)
-+ : "cc"
-+ );
-+
-+ /*
-+ * turn off thread select bits if they were on
-+ */
-+ BUG_ON((save_csr & 0x04100) != 0);
-+ if (unlikely(save_csr & 0x04100)) {
-+ /*
-+ * Things are in funny state as thread select bits are on in
-+ * csr. PANIC.
-+ */
-+ panic("In unaligned trap handler. Trap thread CSR has thread "
-+ "select bits on.\n");
-+ }
-+
-+ save_csr = save_csr & 0x1000ff;
-+
-+ /*
-+ * get the source1 operand
-+ */
-+ source1 = 0;
-+ if (src_operand) {
-+ unsigned char *src_address;
-+
-+ /*
-+ * source1 comes from memory
-+ */
-+ BUG_ON(!(format == TWO_OP || format == TWO_OP_2 ||
-+ format == SRC || format == SRC_2));
-+ src_address = unaligned_get_address(thread, inst & 0x7ff,
-+ four_byte, save_an,
-+ save_dn, &write_back_an);
-+
-+ /*
-+ * get data (possibly unaligned)
-+ */
-+ if (likely(four_byte)) {
-+ source_data = (*src_address << 24) |
-+ (*(src_address + 1) << 16) |
-+ (*(src_address + 2) << 8) |
-+ *(src_address + 3);
-+ source1 = source_data;
-+ } else {
-+ source1 = *src_address << 8 |
-+ *(src_address + 1);
-+
-+ /*
-+ * Source is not extended if the instrution is MOVE.2 or
-+ * if the cpu CHIP_ID >= 0x30000 and the instruction is
-+ * either LSL.2 or LSR.2. All other cases have to be
-+ * sign extended.
-+ */
-+ if ((!(op == 2 && subop == MOVE_2)) &&
-+ (!((chip_id_copy >= 0x30000) &&
-+ (subop == LSL_2 || subop == LSR_2)))) {
-+ /*
-+ * Have to sign extend the .2 entry.
-+ */
-+ source1 = ((unsigned int)
-+ ((signed int)
-+ ((signed short) source1)));
-+ }
-+ }
-+ } else if (likely(op != MOVEI)) {
-+ /*
-+ * source1 comes from a register, using move.4 d0, src1
-+ * unaligned_emulate_get_source is pointer to code to insert remulated instruction
-+ */
-+ extern unsigned int unaligned_emulate_get_src;
-+ *((int *)&unaligned_emulate_get_src) &= ~(0x7ff);
-+ *((int *)&unaligned_emulate_get_src) |= (inst & 0x7ff);
-+ flush_dcache_range((unsigned long)(&unaligned_emulate_get_src),
-+ (unsigned long)(&unaligned_emulate_get_src) + 4);
-+
-+ asm volatile (
-+ /* source1 uses thread's registers */
-+ " move.4 CSR, %1 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ "unaligned_emulate_get_src: \n\t"
-+ " move.4 %0, #0 \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ : "=d" (source1)
-+ : "d" ((1 << 8) | (thread << 9))
-+ : "cc"
-+ );
-+ }
-+
-+ /*
-+ * get the destination address
-+ */
-+ if (dest_operand) {
-+ BUG_ON(!(format == TWO_OP || format == TWO_OP_2 ||
-+ format == DEST || format == DEST_2));
-+ dest_address = unaligned_get_address(thread,
-+ ((inst >> 16) & 0x7ff),
-+ four_byte, save_an,
-+ save_dn, &write_back_an);
-+ }
-+
-+ if (write_back_an) {
-+ /*
-+ * restore any modified An registers
-+ */
-+ asm volatile (
-+ " move.4 CSR, %0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 a0, (%1) \n\t"
-+ " move.4 a1, 4(%1) \n\t"
-+ " move.4 a2, 8(%1) \n\t"
-+ " move.4 a3, 12(%1) \n\t"
-+ " move.4 a4, 16(%1) \n\t"
-+ " move.4 a5, 20(%1) \n\t"
-+ " move.4 a6, 24(%1) \n\t"
-+ " move.4 a7, 28(%1) \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ :
-+ : "d" ((1 << 14) | (thread << 15)), "a" (save_an)
-+ : "cc"
-+ );
-+ }
-+
-+ /*
-+ * get source 2 register if needed, and modify inst to use d1 for
-+ * source-2 source-2 will come from this thread, not the trapping thread
-+ */
-+ source2 = 0;
-+ if ((op >= 8 && op <= 0x17) ||
-+ ((op == 2 || op == 6) && (inst & 0x4000000))) {
-+ int src_dn = (inst >> 11) & 0xf;
-+ source2 = save_dn[src_dn];
-+ /*
-+ * force the emulated instruction to use d1 for source2 operand
-+ */
-+ emulate_inst = (emulate_inst & 0xffff07ff) | 0x800;
-+ }
-+
-+ if (likely(op != MOVEI)) {
-+ /*
-+ * change emulated instruction source1 to d0
-+ */
-+ emulate_inst &= ~0x7ff;
-+ emulate_inst |= 1 << 8;
-+ }
-+
-+ if (unlikely(op == 6 || op == 2)) {
-+ /*
-+ * Set destination to d0
-+ */
-+ emulate_inst &= ~(0xf << 16);
-+ } else if (likely(op != CMPI)) {
-+ /*
-+ * Set general destination field to d0.
-+ */
-+ emulate_inst &= ~(0x7ff << 16);
-+ emulate_inst |= 1 << 24;
-+ }
-+
-+ /*
-+ * execute emulated instruction d0, to d0, no memory access
-+ * source2 if needed will be in d1
-+ * source3, CSR, and accumulators are set up before execution
-+ */
-+ *((unsigned int *)&trap_emulate) = emulate_inst;
-+ flush_dcache_range((unsigned long)(&trap_emulate),
-+ (unsigned long)(&trap_emulate) + 4);
-+
-+ result = ubicom32_emulate_insn(source1, source2, source3,
-+ save_acc, &save_csr);
-+
-+ /*
-+ * set the result value
-+ */
-+ if (dest_operand) {
-+ /*
-+ * copy result to memory
-+ */
-+ if (four_byte) {
-+ *dest_address++ =
-+ (unsigned char)((result >> 24) & 0xff);
-+ *dest_address++ =
-+ (unsigned char)((result >> 16) & 0xff);
-+ }
-+ *dest_address++ = (unsigned char)((result >> 8) & 0xff);
-+ *dest_address = (unsigned char)(result & 0xff);
-+ } else if (likely(op != CMPI)) {
-+ /*
-+ * copy result to a register, using move.4 dest, result
-+ */
-+ extern unsigned int unaligned_trap_set_result;
-+ *((unsigned int *)&unaligned_trap_set_result) &= ~0x7ff0000;
-+
-+ if (op == 2 || op == 6) {
-+ *((unsigned int *)&unaligned_trap_set_result) |=
-+ ((inst & 0x000f0000) | 0x01000000);
-+ } else {
-+ *((unsigned int *)&unaligned_trap_set_result) |=
-+ (inst & 0x7ff0000);
-+ }
-+ flush_dcache_range((unsigned long)&unaligned_trap_set_result,
-+ ((unsigned long)(&unaligned_trap_set_result) + 4));
-+
-+ asm volatile (
-+ /* result uses thread's registers */
-+ " move.4 CSR, %1 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ "unaligned_trap_set_result: \n\t"
-+ " move.4 #0, %0 \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ :
-+ : "d"(result), "d" ((1 << 14) | (thread << 15))
-+ : "cc"
-+ );
-+ }
-+
-+ /*
-+ * bump PC in thread and restore implicit register changes
-+ */
-+ asm volatile (
-+ " move.4 CSR, %0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ " move.4 pc, %1 \n\t"
-+ " move.4 acc0_lo, (%3) \n\t"
-+ " move.4 acc0_hi, 4(%3) \n\t"
-+ " move.4 acc1_lo, 8(%3) \n\t"
-+ " move.4 acc1_hi, 12(%3) \n\t"
-+ " move.4 mac_rc16, 16(%3) \n\t"
-+ " move.4 CSR, %2 \n\t"
-+ " setcsr #0 \n\t"
-+ " setcsr_flush 0 \n\t"
-+ :
-+ : "d"((1 << 14) | (thread << 15)),
-+ "d"(pc + 4), "d"(save_csr), "a"(save_acc)
-+ : "cc"
-+ );
-+}
-+
-+/*
-+ * unaligned_only()
-+ * Return true if either of the unaligned causes are set (and no others).
-+ */
-+int unaligned_only(unsigned int cause)
-+{
-+ unsigned int unaligned_cause_mask =
-+ (1 << TRAP_CAUSE_DST_MISALIGNED) |
-+ (1 << TRAP_CAUSE_SRC1_MISALIGNED);
-+
-+ BUG_ON(cause == 0);
-+ return (cause & unaligned_cause_mask) == cause;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/kernel/vmlinux.lds.S linux-2.6.30.10-ubi/arch/ubicom32/kernel/vmlinux.lds.S
---- linux-2.6.30.10/arch/ubicom32/kernel/vmlinux.lds.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/kernel/vmlinux.lds.S 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,370 @@
-+/*
-+ * arch/ubicom32/kernel/vmlinux.lds.S
-+ * vmlinux primary linker script
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <asm-generic/vmlinux.lds.h>
-+#include <asm/ocm_size.h>
-+#include <asm/memory_map.h>
-+#include <asm/thread_info.h>
-+#include <linux/threads.h>
-+
-+/*
-+ * Sanity checks to prevent errors later on that are much harder to understand
-+ */
-+#if !defined APP_OCM_CODE_SIZE
-+#error APP_OCM_CODE_SIZE has not been defined in ocm_size.h
-+#endif
-+
-+#if !defined APP_OCM_DATA_SIZE
-+#error APP_OCM_DATA_SIZE has not been defined in ocm_size.h
-+#endif
-+
-+/*
-+ * The `free' ocm area that ultra does not use.
-+ */
-+#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
-+#define OCM_FREE_START (OCMSTART + APP_OCM_CODE_SIZE)
-+#define OCM_FREE_LENGTH (OCMSIZE - APP_OCM_CODE_SIZE - APP_OCM_DATA_SIZE)
-+#else
-+#define OCM_FREE_START OCMEND
-+#define OCM_FREE_LENGTH 0
-+#endif
-+
-+/*
-+ * If you want to limit OCM use for text/data or completely disable it
-+ * you can change these values.
-+ */
-+#define OCM_TEXT_LENGTH OCM_FREE_LENGTH
-+#define OCM_DATA_LENGTH OCM_FREE_LENGTH
-+
-+#define RAM_START KERNELSTART
-+#define RAM_LENGTH ((SDRAMSTART + CONFIG_MIN_RAMSIZE) - RAM_START)
-+#define TEXT ram
-+#define DATA ram
-+#define INIT ram
-+#define BSS ram
-+
-+#ifndef DATA_ADDR
-+#define DATA_ADDR
-+#endif
-+
-+#include <asm-generic/vmlinux.lds.h>
-+
-+OUTPUT_ARCH(ubicom32)
-+ENTRY(_start)
-+
-+MEMORY {
-+ ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
-+ syscall : ORIGIN = OS_SYSCALL_BEGIN, LENGTH = (OS_SYSCALL_END - OS_SYSCALL_BEGIN)
-+ ocm : ORIGIN = OCM_FREE_START, LENGTH = OCM_FREE_LENGTH
-+}
-+
-+jiffies = jiffies_64 + 4;
-+
-+/*
-+ * Fixed locations required by gdb coredumps.
-+ *
-+ * Note that the names are what gdb is expecting so renaming will break
-+ * the toolchain.
-+ */
-+__ocm_begin = OCMSTART;
-+__ocm_limit = __ocm_begin + OCMSIZE;
-+__sdram_begin = SDRAMSTART;
-+__sdram_limit = __sdram_begin + CONFIG_MIN_RAMSIZE;
-+__filemedia_begin_addr = FLASHSTART;
-+__filemedia_end_addr = __filemedia_begin_addr + 0x00800000;
-+
-+/*
-+ * For internal diagnostics
-+ */
-+__os_syscall_begin = OS_SYSCALL_BEGIN;
-+__os_syscall_end = OS_SYSCALL_END;
-+
-+SECTIONS {
-+
-+ .fixed_text : {
-+ _begin = .;
-+ *(.skip_syscall)
-+ *(.old_syscall_entry.text)
-+ __fixed_text_end = .;
-+ } > TEXT
-+ . = _begin + SIZEOF(.fixed_text) ;
-+
-+ /*
-+ * System call text in lower ocm (fixed location, can never change)
-+ */
-+ __syscall_text_load_begin = .;
-+ __syscall_text_run_begin = OS_SYSCALL_BEGIN;
-+
-+ .syscall_text __syscall_text_run_begin : AT(__syscall_text_load_begin) {
-+ *(.syscall_entry.text) /* Must be at OS_SYSCALL_BEGIN 0x3ffc0040 */
-+ *(.kernel_unprotected)
-+ . = ALIGN(4);
-+ __syscall_text_run_end = .;
-+ } > syscall /* .syscall_text */
-+ . = __syscall_text_load_begin + __syscall_text_run_end - __syscall_text_run_begin ;
-+ __ocm_text_load_begin = .;
-+ __ocm_text_run_begin = OCM_FREE_START ;
-+ .ocm_text __ocm_text_run_begin : AT(__ocm_text_load_begin) {
-+#if OCM_TEXT_LENGTH
-+ *(.ocm_text)
-+ *(.sched.text)
-+ *(.spinlock.text)
-+#include <asm/ocm_text.lds.inc>
-+ . = ALIGN(4);
-+#endif
-+ __ocm_text_run_end = .;
-+ __data_begin = ALIGN(OCM_SECTOR_SIZE);
-+ } > ocm /* .ocm_text */
-+
-+ .ocm_module_text __ocm_text_run_end (NOLOAD) : AT(__ocm_text_run_end) {
-+ __ocm_inst_heap_begin = .;
-+ /* Reserve the min requested */
-+ . += (CONFIG_OCM_MODULES_RESERVATION) * 1024;
-+#ifdef CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
-+ /* Round up to OCM sector size (we cannot use it for data) */
-+ . = ALIGN(OCM_SECTOR_SIZE);
-+#endif
-+ __ocm_inst_heap_end = .;
-+ /* update __data_begin */
-+ __data_begin = ALIGN(OCM_SECTOR_SIZE);
-+ } > ocm /* .ocm_module_text */
-+
-+ . = __ocm_text_load_begin + __ocm_text_run_end - __ocm_text_run_begin ;
-+ __ocm_text_load_end = .;
-+
-+ __ocm_data_load_begin = .;
-+ __ocm_data_run_begin = __data_begin ;
-+#if OCM_DATA_LENGTH
-+ .ocm_data __ocm_data_run_begin : AT(__ocm_data_load_begin) {
-+#if defined(CONFIG_IRQSTACKS_USEOCM)
-+ percpu_irq_stacks = .;
-+ . += NR_CPUS * THREAD_SIZE;
-+#endif
-+ *(.ocm_data)
-+ . = ALIGN(4) ;
-+ __ocm_data_run_end = .;
-+ } > ocm
-+ . = __ocm_data_load_begin + __ocm_data_run_end - __ocm_data_run_begin ;
-+#else
-+ __ocm_data_run_end = __ocm_data_run_begin;
-+#endif
-+ __ocm_data_load_end = .;
-+
-+ __ocm_free_begin = __ocm_data_run_end;
-+ __ocm_free_end = OCM_FREE_START + OCM_FREE_LENGTH;
-+
-+ .text __ocm_data_load_end : AT(__ocm_data_load_end) {
-+ . = ALIGN(4);
-+ _stext = .;
-+ _text = .;
-+ TEXT_TEXT
-+ SCHED_TEXT
-+ LOCK_TEXT
-+ *(.text.lock)
-+ *(.text.__libgcc_udivmodsi)
-+ *(.text.__libgcc_divmodsi)
-+ *(.text.__libgcc_muldi3)
-+ *(.text.__libgcc_udivmoddi)
-+ *(.text.__libgcc_divmoddi)
-+ *(.text.*)
-+#if OCM_TEXT_LENGTH == 0
-+ *(.ocm_text)
-+ *(.sched.text)
-+ *(.spinlock.text)
-+#endif
-+ . = ALIGN(16); /* Exception table */
-+ __start___ex_table = .;
-+ *(__ex_table)
-+ __stop___ex_table = .;
-+
-+ *(.rodata) *(.rodata.*)
-+ *(__vermagic) /* Kernel version magic */
-+ *(__markers_strings)
-+ *(.rodata1)
-+ *(.rodata.str1.1)
-+ *(__tracepoints_strings)
-+
-+ /* PCI quirks */
-+ __start_pci_fixups_early = . ;
-+ *(.pci_fixup_early)
-+ __end_pci_fixups_early = . ;
-+ __start_pci_fixups_header = . ;
-+ *(.pci_fixup_header)
-+ __end_pci_fixups_header = . ;
-+ __start_pci_fixups_final = . ;
-+ *(.pci_fixup_final)
-+ __end_pci_fixups_final = . ;
-+ __start_pci_fixups_enable = . ;
-+ *(.pci_fixup_enable)
-+ __end_pci_fixups_enable = . ;
-+ __start_pci_fixups_resume = . ;
-+ *(.pci_fixup_resume)
-+ __end_pci_fixups_resume = . ;
-+ __start_pci_fixups_resume_early = . ;
-+ *(.pci_fixup_resume_early)
-+ __end_pci_fixups_resume_early = . ;
-+ __start_pci_fixups_suspend = . ;
-+ *(.pci_fixup_suspend)
-+ __end_pci_fixups_suspend = . ;
-+
-+ __start_builtin_fw = . ;
-+ *(.builtin_fw)
-+ __end_builtin_fw = . ;
-+
-+
-+ /* Kernel symbol table: Normal symbols */
-+ . = ALIGN(4);
-+ __start___ksymtab = .;
-+ *(__ksymtab)
-+ __stop___ksymtab = .;
-+
-+ /* Kernel symbol table: GPL-only symbols */
-+ __start___ksymtab_gpl = .;
-+ *(__ksymtab_gpl)
-+ __stop___ksymtab_gpl = .;
-+
-+ /* Kernel symbol table: Normal unused symbols */
-+ __start___ksymtab_unused = .;
-+ *(__ksymtab_unused)
-+ __stop___ksymtab_unused = .;
-+
-+ /* Kernel symbol table: GPL-only unused symbols */
-+ __start___ksymtab_unused_gpl = .;
-+ *(__ksymtab_unused_gpl)
-+ __stop___ksymtab_unused_gpl = .;
-+
-+ /* Kernel symbol table: GPL-future symbols */
-+ __start___ksymtab_gpl_future = .;
-+ *(__ksymtab_gpl_future)
-+ __stop___ksymtab_gpl_future = .;
-+
-+ /* Kernel symbol table: Normal symbols */
-+ __start___kcrctab = .;
-+ *(__kcrctab)
-+ __stop___kcrctab = .;
-+
-+ /* Kernel symbol table: GPL-only symbols */
-+ __start___kcrctab_gpl = .;
-+ *(__kcrctab_gpl)
-+ __stop___kcrctab_gpl = .;
-+
-+ /* Kernel symbol table: GPL-future symbols */
-+ __start___kcrctab_gpl_future = .;
-+ *(__kcrctab_gpl_future)
-+ __stop___kcrctab_gpl_future = .;
-+
-+ /* Kernel symbol table: strings */
-+ *(__ksymtab_strings)
-+
-+ /* Built-in module parameters */
-+ . = ALIGN(4) ;
-+ __start___param = .;
-+ *(__param)
-+ __stop___param = .;
-+
-+ . = ALIGN(4) ;
-+ _etext = . ;
-+ } > TEXT
-+
-+ .data DATA_ADDR : {
-+ . = ALIGN(4);
-+ _sdata = . ;
-+ DATA_DATA
-+#if OCM_DATA_LENGTH == 0
-+ *(.ocm_data)
-+#endif
-+ . = ALIGN(8192) ;
-+ _data_protection_end = .;
-+ *(.data.init_task)
-+ . = ALIGN(4);
-+ _edata = . ;
-+ } > DATA
-+
-+ .init : {
-+ . = ALIGN(4096);
-+ __init_begin = .;
-+ _sinittext = .;
-+ INIT_TEXT
-+ _einittext = .;
-+ *(.init.rodata)
-+ INIT_DATA
-+ . = ALIGN(16);
-+ __setup_start = .;
-+ *(.init.setup)
-+ __setup_end = .;
-+ __initcall_start = .;
-+ INITCALLS
-+ __initcall_end = .;
-+ __con_initcall_start = .;
-+ *(.con_initcall.init)
-+ __con_initcall_end = .;
-+ ___security_initcall_start = .;
-+ *(.security_initcall.init)
-+ ___security_initcall_end = .;
-+#ifdef CONFIG_BLK_DEV_INITRD
-+ . = ALIGN(4);
-+ __initramfs_start = .;
-+ *(.init.ramfs)
-+ __initramfs_end = .;
-+#endif
-+ . = ALIGN(4096);
-+ __per_cpu_start = .;
-+ *(.data.percpu)
-+ *(.data.percpu.shared_aligned)
-+ __per_cpu_end = .;
-+
-+ . = ALIGN(4096);
-+ __init_end = .;
-+ } > INIT
-+
-+ .eh_frame :
-+ {
-+ PROVIDE (___eh_frame_begin = .);
-+ *(.eh_frame)
-+ LONG (0);
-+ PROVIDE (___eh_frame_end = .);
-+ } > INIT
-+
-+ /DISCARD/ : {
-+ EXIT_TEXT
-+ EXIT_DATA
-+ *(.exitcall.exit)
-+ }
-+
-+ .bss : {
-+ . = ALIGN(4);
-+ _sbss = . ;
-+ *(.bss)
-+ *(COMMON)
-+ . = ALIGN(4) ;
-+ _ebss = . ;
-+ _end = . ;
-+ } > BSS
-+
-+ NOTES > BSS
-+
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/lib/checksum.c linux-2.6.30.10-ubi/arch/ubicom32/lib/checksum.c
---- linux-2.6.30.10/arch/ubicom32/lib/checksum.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/lib/checksum.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,250 @@
-+/*
-+ * arch/ubicom32/lib/checksum.c
-+ * Optimized checksum utilities for IP.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ * INET An implementation of the TCP/IP protocol suite for the LINUX
-+ * operating system. INET is implemented using the BSD Socket
-+ * interface as the means of communication with the user level.
-+ *
-+ * IP/TCP/UDP checksumming routines
-+ *
-+ * Authors: Jorge Cwik, <jorge@laser.satlink.net>
-+ * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
-+ * Tom May, <ftom@netcom.com>
-+ * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
-+ * Lots of code moved from tcp.c and ip.c; see those files
-+ * for more names.
-+ *
-+ * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
-+ * Fixed some nasty bugs, causing some horrible crashes.
-+ * A: At some points, the sum (%0) was used as
-+ * length-counter instead of the length counter
-+ * (%1). Thanks to Roman Hodek for pointing this out.
-+ * B: GCC seems to mess up if one uses too many
-+ * data-registers to hold input values and one tries to
-+ * specify d0 and d1 as scratch registers. Letting gcc choose these
-+ * registers itself solves the problem.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
-+ of the assembly has to go. */
-+
-+#include <linux/module.h>
-+#include <net/checksum.h>
-+
-+static unsigned long do_csum(const unsigned char * buff, int len)
-+{
-+ int count;
-+ unsigned long result = 0;
-+
-+ /*
-+ * The following optimized assembly code cannot handle data length less than 7 bytes!
-+ */
-+ if (likely(len >= 7)) {
-+ len -= (4 - (int)buff) & 3;
-+ count = len >> 2;
-+ asm (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
-+
-+ " bfextu d14, %0, #2 \n\t" // test 2 LSB of buff
-+ " jmpne.w.f 100f \n\t"
-+ " add.4 %1, #0, %1 \n\t" // clear C
-+ " moveai a3, #%%hi(1f) \n\t" // table jump
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "100: sub.4 %0, %0, d14 \n\t"
-+ " sub.4 d14, #4, d14 \n\t"
-+ " lsl.4 d14, d14, #3 \n\t"
-+ " add.4 %1, #0, %1 \n\t" // clear C
-+ " moveai a3, #%%hi(1f) \n\t" // table jump
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+ " bfextu %1, (%0)4++, d14 \n\t" // read first partial word
-+ " calli a3, 0(a3) \n\t"
-+#if 1
-+ "200: lsl.4 %3, %3, #3 \n\t"
-+ " bfrvrs d15, (%0), #0 \n\t" // read last word (partial)
-+ " bfextu d15, d15, %3 \n\t"
-+ " bfrvrs d15, d15, #0 \n\t"
-+ " add.4 %1, d15, %1 \n\t"
-+ " addc %1, #0, %1 \n\t" // sample C again
-+ " jmpt.w.t 2f \n\t"
-+#else
-+ "200: move.1 d15, 0(%0) \n\t"
-+ " lsl.4 d15, d15, #8 \n\t"
-+ " add.4 %1, d15, %1 \n\t"
-+ " addc %1, #0, %1 \n\t" // sample C again
-+ " add.4 %3, #-1, %3 \n\t"
-+ " jmpeq.w.t 2f \n\t"
-+
-+ " move.1 d15, 1(%0) \n\t"
-+ " add.4 %1, d15, %1 \n\t"
-+ " addc %1, #0, %1 \n\t" // sample C again
-+ " add.4 %3, #-1, %3 \n\t"
-+ " jmpeq.w.t 2f \n\t"
-+
-+ " move.1 d15, 2(%0) \n\t"
-+ " lsl.4 d15, d15, #8 \n\t"
-+ " add.4 %1, d15, %1 \n\t"
-+ " addc %1, #0, %1 \n\t" // sample C again
-+ " jmpt.w.t 2f \n\t"
-+#endif
-+#if defined(IP7000) || defined(IP7000_REV2)
-+ "300: swapb.2 %1, %1 \n\t"
-+#else
-+ "300: shmrg.2 %1, %1, %1 \n\t"
-+ " lsr.4 %1, %1, #8 \n\t"
-+ " bfextu %1, %1, #16 \n\t"
-+#endif
-+ " jmpt.w.t 3f \n\t"
-+
-+ "1: add.4 %1, (%0)4++, %1 \n\t" // first add without C
-+ " .rept 31 \n\t"
-+ " addc %1, (%0)4++, %1 \n\t"
-+ " .endr \n\t"
-+ " addc %1, #0, %1 \n\t" // sample C again
-+ " add.4 %2, #-32, %2 \n\t"
-+ " jmpgt.w.t 1b \n\t"
-+
-+ " and.4 %3, #3, %3 \n\t" // check n
-+ " jmpne.w.f 200b \n\t"
-+
-+ "2: .rept 2 \n\t"
-+ " lsr.4 d15, %1, #16 \n\t"
-+ " bfextu %1, %1, #16 \n\t"
-+ " add.4 %1, d15, %1 \n\t"
-+ " .endr \n\t"
-+ " btst d14, #3 \n\t" // start from odd address (<< 3)?
-+ " jmpne.w.f 300b \n\t"
-+ "3: \n\t"
-+
-+ : "+a"(buff), "+d"(result), "+d"(count), "+d"(len)
-+ :
-+ : "d15", "d14", "a3", "cc"
-+ );
-+
-+ return result;
-+ }
-+
-+ /*
-+ * handle a few bytes and fold result into 16-bit
-+ */
-+ while (len-- > 0) {
-+ result += (*buff++ << 8);
-+ if (len) {
-+ result += *buff++;
-+ len--;
-+ }
-+ }
-+ asm (
-+ " .rept 2 \n\t"
-+ " lsr.4 d15, %0, #16 \n\t"
-+ " bfextu %0, %0, #16 \n\t"
-+ " add.4 %0, d15, %0 \n\t"
-+ " .endr \n\t"
-+ : "+d" (result)
-+ :
-+ : "d15", "cc"
-+ );
-+
-+ return result;
-+}
-+
-+/*
-+ * This is a version of ip_compute_csum() optimized for IP headers,
-+ * which always checksum on 4 octet boundaries.
-+ */
-+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-+{
-+ return (__force __sum16)~do_csum(iph,ihl*4);
-+}
-+
-+/*
-+ * computes the checksum of a memory block at buff, length len,
-+ * and adds in "sum" (32-bit)
-+ *
-+ * returns a 32-bit number suitable for feeding into itself
-+ * or csum_tcpudp_magic
-+ *
-+ * this function must be called with even lengths, except
-+ * for the last fragment, which may be odd
-+ *
-+ * it's best to have buff aligned on a 32-bit boundary
-+ */
-+__wsum csum_partial(const void *buff, int len, __wsum sum)
-+{
-+ unsigned int result = do_csum(buff, len);
-+
-+ /* add in old sum, and carry.. */
-+ result += (__force u32)sum;
-+ if ((__force u32)sum > result)
-+ result += 1;
-+ return (__force __wsum)result;
-+}
-+
-+EXPORT_SYMBOL(csum_partial);
-+
-+/*
-+ * this routine is used for miscellaneous IP-like checksums, mainly
-+ * in icmp.c
-+ */
-+__sum16 ip_compute_csum(const void *buff, int len)
-+{
-+ return (__force __sum16)~do_csum(buff,len);
-+}
-+
-+/*
-+ * copy from fs while checksumming, otherwise like csum_partial
-+ */
-+
-+__wsum
-+csum_partial_copy_from_user(const void __user *src, void *dst,
-+ int len, __wsum sum, int *csum_err)
-+{
-+ if (csum_err) *csum_err = 0;
-+ memcpy(dst, (__force const void *)src, len);
-+ return csum_partial(dst, len, sum);
-+}
-+
-+/*
-+ * copy from ds while checksumming, otherwise like csum_partial
-+ */
-+
-+__wsum
-+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-+{
-+ memcpy(dst, src, len);
-+ return csum_partial(dst, len, sum);
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/lib/delay.c linux-2.6.30.10-ubi/arch/ubicom32/lib/delay.c
---- linux-2.6.30.10/arch/ubicom32/lib/delay.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/lib/delay.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,49 @@
-+/*
-+ * arch/ubicom32/lib/delay.c
-+ * Ubicom32 implementation of udelay()
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <asm/param.h>
-+#include <asm/delay.h>
-+#include <asm/ip5000.h>
-+
-+/*
-+ * read_current_timer()
-+ * Return the current value of sysval.
-+ */
-+int __devinit read_current_timer(unsigned long *timer_val)
-+{
-+ *timer_val = (long)(UBICOM32_IO_TIMER->sysval);
-+ return 0;
-+}
-+
-+
-+void udelay(unsigned long usecs)
-+{
-+ _udelay(usecs);
-+}
-+EXPORT_SYMBOL(udelay);
-diff -ruN linux-2.6.30.10/arch/ubicom32/lib/Makefile linux-2.6.30.10-ubi/arch/ubicom32/lib/Makefile
---- linux-2.6.30.10/arch/ubicom32/lib/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/lib/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,32 @@
-+#
-+# arch/ubicom32/lib/Makefile
-+# <TODO: Replace with short file description>
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+#
-+# Makefile for m68knommu specific library files..
-+#
-+
-+lib-y := checksum.o delay.o mem_ubicom32.o
-diff -ruN linux-2.6.30.10/arch/ubicom32/lib/mem_ubicom32.c linux-2.6.30.10-ubi/arch/ubicom32/lib/mem_ubicom32.c
---- linux-2.6.30.10/arch/ubicom32/lib/mem_ubicom32.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/lib/mem_ubicom32.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,343 @@
-+/*
-+ * arch/ubicom32/lib/mem_ubicom32.c
-+ * String functions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/compiler.h>
-+
-+#define LIKELY likely
-+#define UNLIKELY unlikely
-+
-+typedef u32_t addr_t;
-+
-+/*
-+ * memcpy()
-+ */
-+void *memcpy(void *dest, const void *src, size_t n)
-+{
-+ void *dest_ret = dest;
-+
-+ if (LIKELY((((addr_t)dest ^ (addr_t)src) & 3) == 0) && LIKELY(n > 6)) {
-+ size_t m;
-+ n -= (4 - (addr_t)dest) & 0x03;
-+ m = n >> 2;
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+
-+ " bfextu d15, %0, #2 \n\t" // d15 = (dest & 3)
-+ " jmpne.w.f 100f \n\t"
-+ " calli a3, 0(a3) \n\t" // 4-byte alignment
-+
-+ "100: cmpi d15, #2 \n\t"
-+ " jmpne.s.f 101f \n\t"
-+ " move.2 (%0)2++, (%1)2++ \n\t"
-+ " calli a3, 0(a3) \n\t" // 2-byte alignment
-+
-+ "101: move.1 (%0)1++, (%1)1++ \n\t"
-+ " jmpgt.s.f 102f \n\t" // 3-byte alignment
-+ " move.2 (%0)2++, (%1)2++ \n\t" // 1-byte alignment
-+ "102: calli a3, 0(a3) \n\t"
-+
-+ "200: cmpi %3, #2 \n\t"
-+ " jmplt.s.f 201f \n\t"
-+ " move.2 (%0)2++, (%1)2++ \n\t"
-+ " jmpeq.s.t 2f \n\t"
-+ "201: move.1 (%0)1++, (%1)1++ \n\t"
-+ " jmpt.w.t 2f \n\t"
-+
-+ "1: .rept 25 \n\t"
-+ " movea (%0)4++, (%1)4++ \n\t"
-+ " .endr \n\t"
-+ " .rept 7 \n\t"
-+ " move.4 (%0)4++, (%1)4++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-32, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+
-+ " and.4 %3, #3, %3 \n\t" // check n
-+ " jmpne.w.f 200b \n\t"
-+ "2: \n\t"
-+ : "+a" (dest), "+a" (src), "+d" (m), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+
-+ return dest_ret;
-+ }
-+
-+ if (LIKELY((((addr_t)dest ^ (addr_t)src) & 1) == 0) && LIKELY(n > 2)) {
-+ size_t m;
-+ n -= (addr_t)dest & 0x01;
-+ m = n >> 1;
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+
-+ " btst %0, #0 \n\t" // check bit 0
-+ " jmpne.w.f 100f \n\t"
-+ " calli a3, 0(a3) \n\t" // 4-byte alignment
-+
-+ "100: move.1 (%0)1++, (%1)1++ \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "200: move.1 (%0)1++, (%1)1++ \n\t"
-+ " jmpt.w.t 2f \n\t"
-+
-+ "1: .rept 32 \n\t"
-+ " move.2 (%0)2++, (%1)2++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-32, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+
-+ " and.4 %3, #1, %3 \n\t" // check n
-+ " jmpne.w.f 200b \n\t"
-+ "2: \n\t"
-+
-+ : "+a" (dest), "+a" (src), "+d" (m), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+
-+ return dest_ret;
-+ }
-+
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t"
-+ " jmpeq.w.f 2f \n\t"
-+ " and.4 d15, #(16-1), d15 \n\t" // d15 = (-n) & (16 - 1)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "1: .rept 16 \n\t"
-+ " move.1 (%0)1++, (%1)1++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-16, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+ "2: \n\t"
-+
-+ : "+a" (dest), "+a" (src), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+
-+ return dest_ret;
-+}
-+
-+/*
-+ * memset()
-+ */
-+void *memset(void *s, int c, size_t n)
-+{
-+ void *s_ret = s;
-+
-+ if (LIKELY(n > 6)) {
-+ size_t m;
-+ n -= (4 - (addr_t)s) & 0x03;
-+ m = n >> 2;
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
-+ " shmrg.1 %1, %1, %1 \n\t"
-+ " shmrg.2 %1, %1, %1 \n\t" // %1 = (c<<24)|(c<<16)|(c<<8)|c
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+
-+ " bfextu d15, %0, #2 \n\t" // d15 = (s & 3)
-+ " jmpne.w.f 100f \n\t"
-+ " calli a3, 0(a3) \n\t" // 4-byte alignment
-+
-+ "100: cmpi d15, #2 \n\t"
-+ " jmpne.s.f 101f \n\t"
-+ " move.2 (%0)2++, %1 \n\t"
-+ " calli a3, 0(a3) \n\t" // 2-byte alignment
-+
-+ "101: move.1 (%0)1++, %1 \n\t"
-+ " jmpgt.s.f 102f \n\t" // 3-byte alignment
-+ " move.2 (%0)2++, %1 \n\t" // 1-byte alignment
-+ "102: calli a3, 0(a3) \n\t"
-+
-+ "200: cmpi %3, #2 \n\t"
-+ " jmplt.s.f 201f \n\t"
-+ " move.2 (%0)2++, %1 \n\t"
-+ " jmpeq.s.t 2f \n\t"
-+ "201: move.1 (%0)1++, %1 \n\t"
-+ " jmpt.w.t 2f \n\t"
-+
-+ "1: .rept 25 \n\t"
-+ " movea (%0)4++, %1 \n\t"
-+ " .endr \n\t"
-+ " .rept 7 \n\t"
-+ " move.4 (%0)4++, %1 \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-32, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+
-+ " and.4 %3, #3, %3 \n\t" // test bit 1 of n
-+ " jmpne.w.f 200b \n\t"
-+ "2: \n\t"
-+
-+ : "+a" (s), "+d" (c), "+d" (m), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+
-+ return s_ret;
-+ }
-+
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t"
-+ " jmpeq.w.f 2f \n\t"
-+ " and.4 d15, #(8-1), d15 \n\t" // d15 = (-%2) & (16 - 1)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "1: .rept 8 \n\t"
-+ " move.1 (%0)1++, %1 \n\t"
-+ " .endr \n\t"
-+ "2: \n\t"
-+
-+ : "+a" (s), "+d" (c), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+
-+ return s_ret;
-+}
-+
-+void *memmove(void *dest, const void *src, size_t n)
-+{
-+ char *tmp;
-+ const char *s;
-+
-+ if (n == 0)
-+ return dest;
-+
-+ tmp = dest;
-+ s = src;
-+
-+ /*
-+ * Will perform 16-bit move if possible
-+ */
-+ if (likely((((u32)dest | (u32)src | n) & 1) == 0)) {
-+ if (dest <= src) {
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(32-2), d15 \n\t" // d15 = (- count) & (32 - 2)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.2 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "1: .rept 16 \n\t"
-+ " move.2 (%0)2++, (%1)2++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-32, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+
-+ : "+a" (tmp), "+a" (s), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+ } else {
-+ tmp += n;
-+ s += n;
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(32-2), d15 \n\t" // d15 = (- count) & (32 - 2)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.2 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "1: .rept 16 \n\t"
-+ " move.2 -2(%0)++, -2(%1)++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-32, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+
-+ : "+a" (tmp), "+a" (s), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+ }
-+ return dest;
-+ }
-+
-+ if (dest <= src) {
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(16-1), d15 \n\t" // d15 = (- count) & (16 - 1)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "1: .rept 16 \n\t"
-+ " move.1 (%0)1++, (%1)1++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-16, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+ : "+a" (tmp), "+a" (s), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+ } else {
-+ tmp += n;
-+ s += n;
-+ asm volatile (
-+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
-+ " and.4 d15, #(16-1), d15 \n\t" // d15 = (- count) & (16 - 1)
-+ " moveai a3, #%%hi(1f) \n\t"
-+ " lea.1 a3, %%lo(1f)(a3) \n\t"
-+ " lea.4 a3, (a3,d15) \n\t"
-+ " calli a3, 0(a3) \n\t"
-+
-+ "1: .rept 16 \n\t"
-+ " move.1 -1(%0)++, -1(%1)++ \n\t"
-+ " .endr \n\t"
-+ " add.4 %2, #-16, %2 \n\t"
-+ " jmpgt.w.f 1b \n\t"
-+ : "+a" (tmp), "+a" (s), "+d" (n)
-+ :
-+ : "d15", "a3", "memory", "cc"
-+ );
-+ }
-+ return dest;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/audio.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/audio.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/audio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/audio.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/ubicom32/mach-common/audio.c
-+ * Generic initialization for Ubicom32 Audio
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+
-+#include <asm/devtree.h>
-+#include <asm/audio.h>
-+#include <asm/ubi32-pcm.h>
-+
-+/*
-+ * The number of audio devices currently allocated, used for .id
-+ */
-+static int __initdata audio_device_count;
-+
-+/*
-+ * The maximum number of resources (cards) that the audio will have.
-+ * Currently 3, a register space, and up to 2 interrupts.
-+ */
-+#define AUDIO_MAX_RESOURCES 3
-+
-+/*
-+ * audio_device_alloc
-+ * Checks the device tree and allocates a platform_device if found
-+ */
-+struct platform_device * __init audio_device_alloc(const char *driver_name,
-+ const char *node_name, const char *inst_name, int priv_bytes)
-+{
-+ struct platform_device *pdev;
-+ struct resource *res;
-+ struct audio_node *audio_node;
-+ struct ubi32pcm_platform_data *pdata;
-+ struct audio_dev_regs *adr;
-+ int idx;
-+
-+ /*
-+ * Check the device tree for the audio node
-+ */
-+ audio_node = (struct audio_node *)devtree_find_node(node_name);
-+ if (!audio_node) {
-+ printk(KERN_WARNING "audio device '%s' not found\n", node_name);
-+ return NULL;
-+ }
-+
-+ if (audio_node->version != AUDIONODE_VERSION) {
-+ printk(KERN_WARNING "audio node not compatible\n");
-+ return NULL;
-+ }
-+
-+ /*
-+ * Find the instance in this node
-+ */
-+ adr = audio_node->regs->adr;
-+ for (idx = 0; idx < audio_node->regs->max_devs; idx++) {
-+ if ((adr->version == AUDIO_DEV_REGS_VERSION) &&
-+ (strcmp(adr->name, inst_name) == 0)) {
-+ break;
-+ }
-+ adr++;
-+ }
-+ if (idx == audio_node->regs->max_devs) {
-+ printk(KERN_WARNING "audio inst '%s' not found in device '%s'\n", inst_name, node_name);
-+ return NULL;
-+ }
-+
-+ /*
-+ * Dynamically create the platform_device structure and resources
-+ */
-+ pdev = kzalloc(sizeof(struct platform_device) +
-+ sizeof(struct ubi32pcm_platform_data) +
-+ priv_bytes , GFP_KERNEL);
-+ if (!pdev) {
-+ printk(KERN_WARNING "audio could not alloc pdev\n");
-+ return NULL;
-+ }
-+
-+ res = kzalloc(sizeof(struct resource) * AUDIO_MAX_RESOURCES,
-+ GFP_KERNEL);
-+ if (!res) {
-+ kfree(pdev);
-+ printk(KERN_WARNING "audio could not alloc res\n");
-+ return NULL;
-+ }
-+
-+ pdev->name = driver_name;
-+ pdev->id = audio_device_count++;
-+ pdev->resource = res;
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ res[0].start = (u32_t)(audio_node->regs);
-+ res[0].end = (u32_t)(audio_node->regs);
-+ res[0].flags = IORESOURCE_MEM;
-+ res[1 + AUDIO_TX_IRQ_RESOURCE].start = audio_node->dn.sendirq;
-+ res[1 + AUDIO_TX_IRQ_RESOURCE].flags = IORESOURCE_IRQ;
-+ res[1 + AUDIO_RX_IRQ_RESOURCE].start = audio_node->dn.recvirq;
-+ res[1 + AUDIO_RX_IRQ_RESOURCE].flags = IORESOURCE_IRQ;
-+ pdev->num_resources = 3;
-+
-+ printk(KERN_INFO "Audio.%d '%s':'%s' found irq=%d/%d.%d regs=%p pdev=%p/%p\n",
-+ pdev->id, node_name, inst_name, audio_node->dn.sendirq,
-+ audio_node->dn.recvirq, idx, audio_node->regs, pdev, res);
-+ pdata = (struct ubi32pcm_platform_data *)(pdev + 1);
-+ pdev->dev.platform_data = pdata;
-+ pdata->node_name = node_name;
-+ pdata->inst_name = inst_name;
-+ pdata->inst_num = idx;
-+ if (priv_bytes) {
-+ pdata->priv_data = pdata + 1;
-+ }
-+
-+ return pdev;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/board.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/board.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/board.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/board.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/ubicom32/mach-common/board.c
-+ * Board init and support code.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/cpu.h>
-+#include <asm/devtree.h>
-+
-+struct boardnode {
-+ struct devtree_node dn;
-+ const char *revision;
-+};
-+
-+static const struct boardnode *bn;
-+
-+/*
-+ * board_get_revision()
-+ * Returns revision string of the board.
-+ */
-+const char *board_get_revision(void)
-+{
-+ if (!bn) {
-+ return "NULL";
-+ }
-+
-+ return bn->revision;
-+}
-+
-+/*
-+ * board_init
-+ */
-+void __init board_init(void)
-+{
-+ bn = (struct boardnode *)devtree_find_node("board");
-+ if (!bn) {
-+ printk(KERN_WARNING "board node not found\n");
-+ return;
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/bootargs.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/bootargs.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/bootargs.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/bootargs.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/ubicom32/mach-common/bootargs.c
-+ * Board init and support code.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/cpu.h>
-+#include <asm/devtree.h>
-+
-+struct bootargsnode {
-+ struct devtree_node dn;
-+ const char cmdline[512];
-+};
-+
-+static const struct bootargsnode *ban;
-+
-+/*
-+ * bootargs_get_cmdline()
-+ * Returns kernel boot arguments set by the bootloader.
-+ */
-+const char *bootargs_get_cmdline(void)
-+{
-+ if (!ban) {
-+ return "";
-+ }
-+
-+ return ban->cmdline;
-+}
-+
-+/*
-+ * bootargs_init
-+ */
-+void __init bootargs_init(void)
-+{
-+ ban = (struct bootargsnode *)devtree_find_node("bootargs");
-+ if (!ban) {
-+ printk(KERN_WARNING "bootargs node not found\n");
-+ return;
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/cachectl.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/cachectl.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/cachectl.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/cachectl.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,136 @@
-+/*
-+ * arch/ubicom32/mach-common/cachectl.c
-+ * Architecture cache control support
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <asm/cachectl.h>
-+
-+/*
-+ * The write queue flush procedure in mem_cache_control needs to make
-+ * DCACHE_WRITE_QUEUE_LENGTH writes to DDR (not OCM). Here we reserve some
-+ * memory for this operation.
-+ * Allocate array of cache lines of least DCACHE_WRITE_QUEUE_LENGTH + 1 words in
-+ * length rounded up to the nearest cache line.
-+ */
-+#define CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE \
-+ ALIGN(sizeof(int) * (DCACHE_WRITE_QUEUE_LENGTH + 1), CACHE_LINE_SIZE)
-+
-+static char cache_write_queue_flush_area[CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE]
-+ __attribute__((aligned(CACHE_LINE_SIZE)));
-+
-+/*
-+ * ONE_CCR_ADDR_OP is a helper macro that executes a single CCR operation.
-+ */
-+#define ONE_CCR_ADDR_OP(cc, op_addr, op) \
-+ do { \
-+ asm volatile ( \
-+ " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \
-+ " jmpne.f .-4 \n\t" \
-+ " move.4 "D(CCR_ADDR)"(%0), %1 \n\t" \
-+ " move.1 "D(CCR_CTRL+3)"(%0), %2 \n\t" \
-+ " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \
-+ " cycles 2 \n\t" \
-+ " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_DONE)" \n\t" \
-+ " jmpeq.f .-4 \n\t" \
-+ : \
-+ : "a"(cc), "r"(op_addr), "r"(op & 0xff) \
-+ : "cc" \
-+ ); \
-+ } while (0)
-+
-+/*
-+ * mem_cache_control()
-+ * Special cache control operation
-+ */
-+void mem_cache_control(unsigned long cc, unsigned long begin_addr,
-+ unsigned long end_addr, unsigned long op)
-+{
-+ unsigned long op_addr;
-+ int dccr = cc == DCCR_BASE;
-+ if (dccr && op == CCR_CTRL_FLUSH_ADDR) {
-+ /*
-+ * We ensure all previous writes have left the data cache write
-+ * queue by sending DCACHE_WRITE_QUEUE_LENGTH writes (to
-+ * different words) down the queue. If this is not done it's
-+ * possible that the data we are trying to flush hasn't even
-+ * entered the data cache.
-+ * The +1 ensure that the final 'flush' is actually a flush.
-+ */
-+ int *flush_area = (int *)cache_write_queue_flush_area;
-+ asm volatile(
-+ " .rept "D(DCACHE_WRITE_QUEUE_LENGTH + 1)" \n\t"
-+ " move.4 (%0)4++, d0 \n\t"
-+ " .endr \n\t"
-+ : "+a"(flush_area)
-+ );
-+ }
-+
-+ if (dccr)
-+ UBICOM32_LOCK(DCCR_LOCK_BIT);
-+ else
-+ UBICOM32_LOCK(ICCR_LOCK_BIT);
-+
-+ /*
-+ * Calculate the cache lines we need to operate on that include
-+ * begin_addr though end_addr.
-+ */
-+ begin_addr = begin_addr & ~(CACHE_LINE_SIZE - 1);
-+ end_addr = (end_addr + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
-+ op_addr = begin_addr;
-+
-+ do {
-+ ONE_CCR_ADDR_OP(cc, op_addr, op);
-+ op_addr += CACHE_LINE_SIZE;
-+ } while (likely(op_addr < end_addr));
-+
-+ if (dccr && op == CCR_CTRL_FLUSH_ADDR) {
-+ /*
-+ * It turns out that when flushing the data cache the last flush
-+ * isn't actually complete at this point. This is because there
-+ * is another write buffer on the DDR side of the cache that is
-+ * arbitrated with the I-Cache.
-+ *
-+ * The only foolproof method that ensures that the last data
-+ * cache flush *actually* completed is to do another flush on a
-+ * dirty cache line. This flush will block until the DDR write
-+ * buffer is empty.
-+ *
-+ * Rather than creating a another dirty cache line, we use the
-+ * flush_area above as we know that it is dirty from previous
-+ * writes.
-+ */
-+ ONE_CCR_ADDR_OP(cc, cache_write_queue_flush_area, op);
-+ }
-+
-+ if (dccr)
-+ UBICOM32_UNLOCK(DCCR_LOCK_BIT);
-+ else
-+ UBICOM32_UNLOCK(ICCR_LOCK_BIT);
-+
-+}
-+EXPORT_SYMBOL(mem_cache_control);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/common.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/common.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/common.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/common.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,64 @@
-+/*
-+ * arch/ubicom32/mach-common/common.c
-+ * Common platform support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/errno.h>
-+#include <linux/err.h>
-+#include <linux/string.h>
-+#include <linux/clk.h>
-+#include <linux/mutex.h>
-+#include <linux/platform_device.h>
-+
-+
-+/* Minimum CLK support */
-+
-+struct clk *clk_get(struct device *dev, const char *id)
-+{
-+ return ERR_PTR(-ENOENT);
-+}
-+EXPORT_SYMBOL(clk_get);
-+
-+void clk_put(struct clk *clk)
-+{
-+}
-+EXPORT_SYMBOL(clk_put);
-+
-+int clk_enable(struct clk *clk)
-+{
-+ return 0;
-+}
-+EXPORT_SYMBOL(clk_enable);
-+
-+
-+void clk_disable(struct clk *clk)
-+{
-+}
-+EXPORT_SYMBOL(clk_disable);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/io.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/io.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/io.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/io.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,250 @@
-+/*
-+ * arch/ubicom32/mach-common/io.c
-+ * PCI I/O memory read/write support functions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/io.h>
-+
-+#ifdef CONFIG_PCI
-+unsigned char ioread8(void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ return ubi32_pci_read_u8(addr);
-+ else
-+ return (unsigned char)(*(volatile unsigned char *)addr);
-+}
-+EXPORT_SYMBOL(ioread8);
-+
-+unsigned short ioread16(void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ return ubi32_pci_read_u16(addr);
-+ else
-+ return (unsigned short)(*(volatile unsigned short *)addr);
-+}
-+EXPORT_SYMBOL(ioread16);
-+
-+unsigned int ioread32(void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ return ubi32_pci_read_u32(addr);
-+ else
-+ return (unsigned int)(*(volatile unsigned int *)addr);
-+}
-+EXPORT_SYMBOL(ioread32);
-+
-+void iowrite32(unsigned int val, void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ ubi32_pci_write_u32(val, addr);
-+ else
-+ *(volatile unsigned int *)addr = val;
-+}
-+EXPORT_SYMBOL(iowrite32);
-+
-+void iowrite16(unsigned short val, void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ ubi32_pci_write_u16(val, addr);
-+ else
-+ *(volatile unsigned short *)addr = val;
-+}
-+EXPORT_SYMBOL(iowrite16);
-+
-+void iowrite8(unsigned char val, void __iomem *addr)
-+{
-+ if (IS_PCI_ADDRESS(addr))
-+ ubi32_pci_write_u8(val, addr);
-+ else
-+ *(volatile unsigned char *)addr = val;
-+}
-+EXPORT_SYMBOL(iowrite8);
-+
-+void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
-+{
-+ if (IS_PCI_ADDRESS(from)) {
-+ if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) {
-+ while ((int)len >= 4) {
-+ *(u32_t *)to = ubi32_pci_read_u32(from);
-+ to += 4;
-+ from += 4;
-+ len -= 4;
-+ }
-+ } else if ((((u32_t)from & 0x1) == 0) &&
-+ (((u32_t)to & 0x1) == 0)) {
-+ while ((int)len >= 2) {
-+ *(u16_t *)to = ubi32_pci_read_u16(from);
-+ to += 2;
-+ from += 2;
-+ len -= 2;
-+ }
-+ }
-+
-+ while (len) {
-+ *(u8_t *)to = ubi32_pci_read_u8(from);
-+ to++;
-+ from++;
-+ len--;
-+ }
-+ } else
-+ memcpy(to, (void *)from, len);
-+}
-+EXPORT_SYMBOL(memcpy_fromio);
-+
-+void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
-+{
-+ if (IS_PCI_ADDRESS(to)) {
-+ if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) {
-+ while ((int)len >= 4) {
-+ ubi32_pci_write_u32(*(u32_t *)from, to);
-+ to += 4;
-+ from += 4;
-+ len -= 4;
-+ }
-+ } else if ((((u32_t)from & 0x1) == 0) &&
-+ (((u32_t)to & 0x1) == 0)) {
-+ while ((int)len >= 2) {
-+ ubi32_pci_write_u16(*(u16_t *)from, to);
-+ to += 2;
-+ from += 2;
-+ len -= 2;
-+ }
-+ }
-+
-+ while (len) {
-+ ubi32_pci_write_u8(*(u8_t *)from, to);
-+ from++;
-+ to++;
-+ len--;
-+ }
-+ } else
-+ memcpy((void *)to, from, len);
-+
-+}
-+EXPORT_SYMBOL(memcpy_toio);
-+
-+void memset_io(volatile void __iomem *addr, int val, size_t len)
-+{
-+ if (IS_PCI_ADDRESS(addr)) {
-+ while (len) {
-+ ubi32_pci_write_u8((unsigned char)val, addr);
-+ addr++;
-+ len--;
-+ }
-+ } else
-+ memset((void *)addr, val, len);
-+
-+}
-+EXPORT_SYMBOL(memset_io);
-+
-+void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
-+{
-+ if (IS_PCI_ADDRESS(port)) {
-+ while (count) {
-+ *(u8_t *)buf = ioread8(port);
-+ buf++;
-+ count--;
-+ }
-+ } else {
-+ insb((unsigned int)port, buf, count);
-+ }
-+
-+}
-+EXPORT_SYMBOL(ioread8_rep);
-+
-+void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
-+{
-+ if (IS_PCI_ADDRESS(port)) {
-+ while (count) {
-+ *(u16_t *)buf = ioread16(port);
-+ buf += 2;
-+ count--;
-+ }
-+ } else {
-+ insw((unsigned int)port, buf, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread16_rep);
-+
-+void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
-+{
-+ if (IS_PCI_ADDRESS(port)) {
-+ while (count) {
-+ *(u32_t *)buf = ioread32(port);
-+ buf += 4;
-+ count--;
-+ }
-+ } else {
-+ insl((unsigned int)port, buf, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread32_rep);
-+
-+void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
-+{
-+ if (IS_PCI_ADDRESS(port)) {
-+ while (count) {
-+ iowrite8(*(u8_t *)buf, port);
-+ buf++;
-+ count--;
-+ }
-+ } else {
-+ outsb((unsigned int)port, buf, count);
-+ }
-+
-+}
-+EXPORT_SYMBOL(iowrite8_rep);
-+
-+void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
-+{
-+ if (IS_PCI_ADDRESS(port)) {
-+ while (count) {
-+ iowrite16(*(u16_t *)buf, port);
-+ buf += 2;
-+ count--;
-+ }
-+ } else {
-+ outsw((unsigned int)port, buf, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite16_rep);
-+
-+void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
-+{
-+ if (IS_PCI_ADDRESS(port)) {
-+ while (count) {
-+ iowrite32(*(u32_t *)buf, port);
-+ buf += 4;
-+ count--;
-+ }
-+ } else {
-+ outsl((unsigned int)port, buf, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite32_rep);
-+
-+#endif /* CONFIG_PCI */
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/Kconfig.switch linux-2.6.30.10-ubi/arch/ubicom32/mach-common/Kconfig.switch
---- linux-2.6.30.10/arch/ubicom32/mach-common/Kconfig.switch 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/Kconfig.switch 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,12 @@
-+menuconfig UBICOM_SWITCH
-+ tristate "Switch devices"
-+ help
-+ This option provides Ethernet switch management options via proc fs
-+
-+if UBICOM_SWITCH
-+config UBICOM_SWITCH_BCM539X
-+ tristate "Broadcom BCM539X series (SPI)"
-+ depends on SPI_MASTER
-+ help
-+ Supports Broadcom BCM539X Gigabit Ethernet Switches over SPI
-+endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/Makefile linux-2.6.30.10-ubi/arch/ubicom32/mach-common/Makefile
---- linux-2.6.30.10/arch/ubicom32/mach-common/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,41 @@
-+#
-+# arch/ubicom32/mach-common/Makefile
-+# Makefile for Ubicom32 generic drivers/code.
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+obj-y += cachectl.o common.o usb_tio.o usb.o ubi32-gpio.o board.o bootargs.o profile.o
-+obj-$(CONFIG_PCI) += pci.o io.o
-+
-+obj-$(CONFIG_FB_UBICOM32) += vdc_tio.o
-+obj-$(CONFIG_UBICOM_HID) += ubicom32hid.o
-+obj-$(CONFIG_UBICOM_INPUT) += ubicom32input.o
-+obj-$(CONFIG_UBICOM_INPUT_I2C) += ubicom32input_i2c.o
-+obj-$(CONFIG_UBICOM_SWITCH) += switch-core.o
-+obj-$(CONFIG_UBICOM_SWITCH_BCM539X) += switch-bcm539x.o
-+obj-$(CONFIG_UIO_UBICOM32RING) += ring_tio.o
-+obj-$(CONFIG_SND_UBI32) += audio.o
-+obj-$(CONFIG_UBICOM32_PLIO) += plio.o
-+
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/pci.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/pci.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/pci.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/pci.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,1157 @@
-+/*
-+ * arch/ubicom32/mach-common/pci.c
-+ * PCI interface management.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/devtree.h>
-+#include <asm/ip5000.h>
-+#include <asm/ubicom32-common.h>
-+
-+static int debug_pci = 1 ;
-+
-+/* #define PCI_USE_INTERNAL_LOCK 1 */
-+
-+#ifdef PCI_USE_INTERNAL_LOCK
-+#define PCI_LOCK(lock, irqflag) pci_lock_acquire(irqflag)
-+#define PCI_UNLOCK(lock, irqflag) pci_lock_release(irqflag)
-+#elif defined(CONFIG_SMP)
-+static DEFINE_SPINLOCK(pci_master_lock);
-+#define PCI_LOCK(lock, irqflag) spin_lock_irqsave(lock, irqflag)
-+#define PCI_UNLOCK(lock, irqflag) spin_unlock_irqrestore(lock, irqflag)
-+#else
-+#define PCI_LOCK(lock, irqflag) local_irq_save(irqflag)
-+#define PCI_UNLOCK(lock, irqflag) local_irq_restore(irqflag)
-+#endif
-+
-+#define PCI_DEV0_IDSEL CONFIG_PCI_DEV0_IDSEL
-+#define PCI_DEV1_IDSEL CONFIG_PCI_DEV1_IDSEL
-+
-+/*
-+ * PCI commands
-+ */
-+#define PCI_CMD_INT_ACK 0x00 /* not supported */
-+#define PCI_CMD_SPECIAL 0x01 /* not supported */
-+#define PCI_CMD_IO_READ 0x02
-+#define PCI_CMD_IO_WRITE 0x03
-+#define PCI_CMD_MEM_READ 0x06
-+#define PCI_CMD_MEM_WRITE 0x07
-+#define PCI_CMD_CFG_READ 0x0a
-+#define PCI_CMD_CFG_WRITE 0x0b
-+#define PCI_CMD_MEM_READ_MULT 0x0c /* not supported */
-+#define PCI_CMD_DUAL_ADDR 0x0d /* not supported */
-+#define PCI_CMD_MEM_READ_LINE 0x0e /* not supported */
-+#define PCI_CMD_MEM_WRITE_INVAL 0x0f /* not supported */
-+/*
-+ * Status codes, returned by pci_read_u32() and pci_write_u32()
-+ */
-+#define PCI_RESP_IN_PROGRESS 0xff /* request still in queue */
-+#define PCI_RESP_OK 0
-+/*
-+ * The following codes indicate that the request has completed
-+ */
-+#define PCI_RESP_NO_DEVSEL 1 /* timeout before target asserted
-+ * DEVSEL! */
-+#define PCI_RESP_LOST_DEVSEL 2 /* had DEVSEL, but went away before
-+ * transfer completed! */
-+#define PCI_RESP_BAD_TRDY 3 /* target asserted TRDY without
-+ * DEVSEL! */
-+#define PCI_RESP_NO_TRDY 4 /* timeout before target asserted
-+ * TRDY! */
-+#define PCI_RESP_BAD_STOP 5 /* target asserted STOP and TRDY
-+ * without DEVSEL! */
-+#define PCI_RESP_TARGET_ABORT 6
-+#define PCI_RESP_TARGET_RETRY 7
-+#define PCI_RESP_TARGET_DISCONNECT 8
-+#define PCI_RESP_MISMATCH 9 /* data read back doesn't match data
-+ * written - debug only, the core PCI
-+ * routines never return this */
-+#define PCI_RESP_DET_SERR 10
-+#define PCI_RESP_DET_PERR 11
-+#define PCI_RESP_MALFORMED_REQ 12 /* Could be due to misaligned
-+ * requests or invalid address */
-+#define PCI_RESP_NO_RESOURCE 13 /* Could be memory or other resourse
-+ * like queue space */
-+#define PCI_RESP_ERROR 14 /* All emcompassing error */
-+
-+/* registers in PCI config space */
-+#define PCI_DEVICE_VENDOR_ID_REG 0x00
-+#define PCI_STATUS_COMMAND_REG 0x04
-+#define PCI_CLASS_REVISION_REG 0x08
-+#define PCI_BHLC_REG 0x0c /* BIST, Header type, Latency
-+ * timer, Cache line size */
-+#define PCI_BASE_ADDR_REG 0x10
-+#define PCI_BASE_REG_COUNT 6
-+#define CARDBUS_CIS_PTR_REG 0x28
-+#define PCI_SUB_SYSTEM_ID_REG 0x2c
-+#define PCI_EXP_ROM_ADDR_REG 0x30
-+#define PCI_CAP_PTR_REG 0x34
-+#define PCI_LGPL_REG 0x3C /* max Latency, min Gnt, interrupt
-+ * Pin, interrupt Line */
-+
-+struct pci_master_request {
-+ volatile u32_t pci_address; /* must be 4-byte aligned */
-+ volatile u32_t data; /* must be 4-byte aligned */
-+ volatile u8_t cmd;
-+ volatile u8_t byte_valid;
-+ volatile u8_t status;
-+};
-+
-+struct pci_devnode {
-+ struct devtree_node dn;
-+ u32_t pci_idsel_0;
-+ u32_t pci_idsel_1;
-+ u32_t pci_cpu_address;
-+ struct pci_master_request volatile *volatile req;
-+};
-+
-+static struct pci_master_request req; /* globally used for faster master write
-+ * (discarding result when possible) */
-+static struct pci_devnode *pci_node;
-+
-+#if !defined(CONFIG_DEBUG_PCIMEASURE)
-+#define PCI_DECLARE_MEASUREMENT
-+#define PCI_MEASUREMENT_START()
-+#define PCI_MEASUREMENT_END(idx)
-+#else
-+#define PCI_DECLARE_MEASUREMENT \
-+ int __diff; \
-+ unsigned int __tstart;
-+
-+#define PCI_MEASUREMENT_START() \
-+ __tstart = UBICOM32_IO_TIMER->sysval;
-+
-+#define PCI_MEASUREMENT_END(idx) \
-+ __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \
-+ pci_measurement_update((idx), __diff);
-+
-+#define PCI_WEIGHT 32
-+
-+struct pci_measurement {
-+ volatile unsigned int min;
-+ volatile unsigned int avg;
-+ volatile unsigned int max;
-+};
-+
-+enum pci_measurement_list {
-+ PCI_MEASUREMENT_READ32,
-+ PCI_MEASUREMENT_WRITE32,
-+ PCI_MEASUREMENT_READ16,
-+ PCI_MEASUREMENT_WRITE16,
-+ PCI_MEASUREMENT_READ8,
-+ PCI_MEASUREMENT_WRITE8,
-+ PCI_MEASUREMENT_LAST,
-+};
-+
-+static const char *pci_measurement_name_list[PCI_MEASUREMENT_LAST] = {
-+ "READ32",
-+ "WRITE32",
-+ "READ16",
-+ "WRITE16",
-+ "READ8",
-+ "WRITE8"
-+};
-+static struct pci_measurement pci_measurements[PCI_MEASUREMENT_LAST];
-+
-+/*
-+ * pci_measurement_update()
-+ * Update an entry in the measurement array for this idx.
-+ */
-+static void pci_measurement_update(int idx, int sample)
-+{
-+ struct pci_measurement *pm = &pci_measurements[idx];
-+ if ((pm->min == 0) || (pm->min > sample)) {
-+ pm->min = sample;
-+ }
-+ if (pm->max < sample) {
-+ pm->max = sample;
-+ }
-+ pm->avg = ((pm->avg * (PCI_WEIGHT - 1)) + sample) / PCI_WEIGHT;
-+}
-+#endif
-+
-+#if defined(PCI_USE_INTERNAL_LOCK)
-+/*
-+ * pci_lock_release()
-+ * Release the PCI lock.
-+ */
-+static void pci_lock_release(unsigned long irqflag)
-+{
-+ UBICOM32_UNLOCK(PCI_LOCK_BIT);
-+}
-+
-+/*
-+ * pci_lock_acquire()
-+ * Acquire the PCI lock, spin if not available.
-+ */
-+static void pci_lock_acquire(unsigned long irqflag)
-+{
-+ UBICOM32_LOCK(PCI_LOCK_BIT);
-+}
-+#endif
-+
-+/*
-+ * pci_set_hrt_interrupt()
-+ */
-+static inline void pci_set_hrt_interrupt(struct pci_devnode *pci_node)
-+{
-+ ubicom32_set_interrupt(pci_node->dn.sendirq);
-+}
-+
-+/*
-+ * pci_read_u32()
-+ * Synchronously read 32 bits from PCI space.
-+ */
-+u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data)
-+{
-+ u8 status;
-+ unsigned long irqflag;
-+
-+
-+ /*
-+ * Fill in the request.
-+ */
-+ volatile struct pci_master_request lreq;
-+ PCI_DECLARE_MEASUREMENT;
-+
-+ lreq.pci_address = address;
-+ lreq.cmd = pci_cmd;
-+ lreq.byte_valid = 0xf; /* enable all bytes */
-+
-+ /*
-+ * Wait for any previous request to complete and then make this request.
-+ */
-+ PCI_MEASUREMENT_START();
-+ PCI_LOCK(&pci_master_lock, irqflag);
-+ while (unlikely(pci_node->req == &req))
-+ ;
-+ pci_node->req = &lreq;
-+ pci_set_hrt_interrupt(pci_node);
-+ PCI_UNLOCK(&pci_master_lock, irqflag);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ while (unlikely(pci_node->req == &lreq))
-+ ;
-+ status = lreq.status;
-+ if (likely(status == PCI_RESP_OK))
-+ *data = le32_to_cpu(lreq.data);
-+ else
-+ *data = 0;
-+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ32);
-+ return status;
-+}
-+
-+/*
-+ * pci_write_u32()
-+ * Asyncrhnously or synchronously write 32 bits to PCI master space.
-+ */
-+u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data)
-+{
-+ unsigned long irqflag;
-+ PCI_DECLARE_MEASUREMENT;
-+
-+ /*
-+ * Wait for any previous write or pending read to complete.
-+ *
-+ * We use a global data block because once we write the request
-+ * we do not wait for it to complete before exiting.
-+ */
-+ PCI_MEASUREMENT_START();
-+ PCI_LOCK(&pci_master_lock, irqflag);
-+ while (unlikely(pci_node->req == &req))
-+ ;
-+ req.pci_address = address;
-+ req.data = cpu_to_le32(data);
-+ req.cmd = pci_cmd;
-+ req.byte_valid = 0xf; /* enable all bytes */
-+ pci_node->req = &req;
-+ pci_set_hrt_interrupt(pci_node);
-+ PCI_UNLOCK(&pci_master_lock, irqflag);
-+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE32);
-+ return PCI_RESP_OK;
-+}
-+
-+/*
-+ * pci_read_u16()
-+ * Synchronously read 16 bits from PCI space.
-+ */
-+u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data)
-+{
-+ u8 status;
-+ unsigned long irqflag;
-+
-+ /*
-+ * Fill in the request.
-+ */
-+ volatile struct pci_master_request lreq;
-+ PCI_DECLARE_MEASUREMENT;
-+
-+ lreq.pci_address = address & ~2;
-+ lreq.cmd = pci_cmd;
-+ lreq.byte_valid = (address & 2) ? 0xc : 0x3;
-+
-+ /*
-+ * Wait for any previous request to complete and then make this request.
-+ */
-+ PCI_MEASUREMENT_START();
-+ PCI_LOCK(&pci_master_lock, irqflag);
-+ while (unlikely(pci_node->req == &req))
-+ ;
-+ pci_node->req = &lreq;
-+ pci_set_hrt_interrupt(pci_node);
-+ PCI_UNLOCK(&pci_master_lock, irqflag);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ while (unlikely(pci_node->req == &lreq))
-+ ;
-+ status = lreq.status;
-+ if (likely(status == PCI_RESP_OK)) {
-+ lreq.data = le32_to_cpu(lreq.data);
-+ *data = (u16)((address & 2) ? (lreq.data >> 16) : lreq.data);
-+ } else
-+ *data = 0;
-+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ16);
-+ return status;
-+}
-+
-+/*
-+ * pci_write_u16()
-+ * Asyncrhnously or synchronously write 16 bits to PCI master space.
-+ */
-+u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data)
-+{
-+ unsigned long irqflag;
-+ PCI_DECLARE_MEASUREMENT;
-+
-+ /*
-+ * Wait for any previous write or pending read to complete.
-+ *
-+ * We use a global data block because once we write the request
-+ * we do not wait for it to complete before exiting.
-+ */
-+ PCI_MEASUREMENT_START();
-+ PCI_LOCK(&pci_master_lock, irqflag);
-+ while (unlikely(pci_node->req == &req))
-+ ;
-+ req.pci_address = address & ~2;
-+ req.data = (u32)data;
-+ req.data = cpu_to_le32((address & 2) ? (req.data << 16) : req.data);
-+ req.cmd = pci_cmd;
-+ req.byte_valid = (address & 2) ? 0xc : 0x3;
-+ pci_node->req = &req;
-+ pci_set_hrt_interrupt(pci_node);
-+ PCI_UNLOCK(&pci_master_lock, irqflag);
-+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE16);
-+ return PCI_RESP_OK;
-+}
-+
-+/*
-+ * pci_read_u8()
-+ * Synchronously read 8 bits from PCI space.
-+ */
-+u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data)
-+{
-+ u8 status;
-+ unsigned long irqflag;
-+
-+ /*
-+ * Fill in the request.
-+ */
-+ volatile struct pci_master_request lreq;
-+ PCI_DECLARE_MEASUREMENT;
-+
-+ lreq.pci_address = address & ~3;
-+ lreq.cmd = pci_cmd;
-+ lreq.byte_valid = 1 << (address & 0x3);
-+
-+ /*
-+ * Wait for any previous request to complete and then make this request.
-+ */
-+ PCI_MEASUREMENT_START();
-+ PCI_LOCK(&pci_master_lock, irqflag);
-+ while (unlikely(pci_node->req == &req))
-+ ;
-+ pci_node->req = &lreq;
-+ pci_set_hrt_interrupt(pci_node);
-+ PCI_UNLOCK(&pci_master_lock, irqflag);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ while (unlikely(pci_node->req == &lreq))
-+ ;
-+ status = lreq.status;
-+ if (likely(status == PCI_RESP_OK)) {
-+ *data = (u8)(lreq.data >> (24 - ((address & 0x3) << 3)));
-+ } else
-+ *data = 0;
-+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ8);
-+ return status;
-+}
-+
-+/*
-+ * pci_write_u8()
-+ * Asyncrhnously or synchronously write 8 bits to PCI master space.
-+ */
-+u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data)
-+{
-+ unsigned long irqflag;
-+ PCI_DECLARE_MEASUREMENT;
-+
-+ /*
-+ * Wait for any previous write or pending read to complete.
-+ *
-+ * We use a global data block because once we write the request
-+ * we do not wait for it to complete before exiting.
-+ */
-+ PCI_MEASUREMENT_START();
-+ PCI_LOCK(&pci_master_lock, irqflag);
-+ while (unlikely(pci_node->req == &req))
-+ ;
-+ req.pci_address = address & ~3;
-+ req.data = ((u32)data << (24 - ((address & 0x3) << 3)));
-+ req.cmd = pci_cmd;
-+ req.byte_valid = 1 << (address & 0x3);
-+ pci_node->req = &req;
-+ pci_set_hrt_interrupt(pci_node);
-+ PCI_UNLOCK(&pci_master_lock, irqflag);
-+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE8);
-+ return PCI_RESP_OK;
-+}
-+
-+unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr)
-+{
-+ unsigned int data;
-+ pci_read_u32(PCI_CMD_MEM_READ, (u32)addr, &data);
-+ return data;
-+}
-+EXPORT_SYMBOL(ubi32_pci_read_u32);
-+
-+unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr)
-+{
-+ unsigned short data;
-+ pci_read_u16(PCI_CMD_MEM_READ, (u32)addr, &data);
-+ return data;
-+}
-+EXPORT_SYMBOL(ubi32_pci_read_u16);
-+
-+unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr)
-+{
-+ unsigned char data;
-+ pci_read_u8(PCI_CMD_MEM_READ, (u32)addr, &data);
-+ return data;
-+}
-+EXPORT_SYMBOL(ubi32_pci_read_u8);
-+
-+void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr)
-+{
-+ pci_write_u32(PCI_CMD_MEM_WRITE, (u32)addr, val);
-+}
-+EXPORT_SYMBOL(ubi32_pci_write_u32);
-+
-+void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr)
-+{
-+ pci_write_u16(PCI_CMD_MEM_WRITE, (u32)addr, val);
-+}
-+EXPORT_SYMBOL(ubi32_pci_write_u16);
-+
-+void ubi32_pci_write_u8(unsigned char val, const void volatile __iomem *addr)
-+{
-+ pci_write_u8(PCI_CMD_MEM_WRITE, (u32)addr, val);
-+}
-+EXPORT_SYMBOL(ubi32_pci_write_u8);
-+
-+#if defined(CONFIG_DEBUG_PCIMEASURE)
-+static unsigned int pci_cycles_to_nano(unsigned int cycles, unsigned int frequency)
-+{
-+ unsigned int nano = ((cycles * 1000) / (frequency / 1000000));
-+ return nano;
-+}
-+
-+/*
-+ * pci_measurement_show()
-+ * Print out the min, avg, max values for each PCI transaction type.
-+ *
-+ * By request, the max value is reset after each dump.
-+ */
-+static int pci_measurement_show(struct seq_file *p, void *v)
-+{
-+ unsigned int min, avg, max;
-+ unsigned int freq = processor_frequency();
-+ int trans = *((loff_t *) v);
-+
-+ if (trans == 0) {
-+ seq_puts(p, "min\tavg\tmax\t(nano-seconds)\n");
-+ }
-+
-+ if (trans >= PCI_MEASUREMENT_LAST) {
-+ return 0;
-+ }
-+
-+ min = pci_cycles_to_nano(pci_measurements[trans].min, freq);
-+ avg = pci_cycles_to_nano(pci_measurements[trans].avg, freq);
-+ max = pci_cycles_to_nano(pci_measurements[trans].max, freq);
-+ pci_measurements[trans].max = 0;
-+ seq_printf(p, "%u\t%u\t%u\t%s\n", min, avg, max, pci_measurement_name_list[trans]);
-+ return 0;
-+}
-+
-+static void *pci_measurement_start(struct seq_file *f, loff_t *pos)
-+{
-+ return (*pos < PCI_MEASUREMENT_LAST) ? pos : NULL;
-+}
-+
-+static void *pci_measurement_next(struct seq_file *f, void *v, loff_t *pos)
-+{
-+ (*pos)++;
-+ if (*pos >= PCI_MEASUREMENT_LAST)
-+ return NULL;
-+ return pos;
-+}
-+
-+static void pci_measurement_stop(struct seq_file *f, void *v)
-+{
-+ /* Nothing to do */
-+}
-+
-+static const struct seq_operations pci_measurement_seq_ops = {
-+ .start = pci_measurement_start,
-+ .next = pci_measurement_next,
-+ .stop = pci_measurement_stop,
-+ .show = pci_measurement_show,
-+};
-+
-+static int pci_measurement_open(struct inode *inode, struct file *filp)
-+{
-+ return seq_open(filp, &pci_measurement_seq_ops);
-+}
-+
-+static const struct file_operations pci_measurement_fops = {
-+ .open = pci_measurement_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = seq_release,
-+};
-+
-+static int __init pci_measurement_init(void)
-+{
-+ proc_create("pci_measurements", 0, NULL, &pci_measurement_fops);
-+ return 0;
-+}
-+module_init(pci_measurement_init);
-+#endif
-+
-+static int ubi32_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *value)
-+{
-+ u8 cmd;
-+ u32 addr;
-+ u8 data8;
-+ u16 data16;
-+
-+ u8 slot = PCI_SLOT(devfn);
-+ u8 fn = PCI_FUNC(devfn);
-+
-+ if (slot > 1) {
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ } else if (slot == 0) {
-+ addr = PCI_DEV0_IDSEL + where;
-+ } else {
-+ addr = PCI_DEV1_IDSEL + where;
-+ }
-+
-+ addr += (fn << 8);
-+
-+ cmd = PCI_CMD_CFG_READ;
-+ if (size == 1) {
-+ pci_read_u8(cmd, addr, &data8);
-+ *value = (u32)data8;
-+ } else if (size == 2) {
-+ pci_read_u16(cmd, addr, &data16);
-+ *value = (u32)data16;
-+ } else {
-+ pci_read_u32(cmd, addr, value);
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int ubi32_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 value)
-+{
-+ u8 cmd;
-+ u32 addr;
-+ u8 slot = PCI_SLOT(devfn);
-+ u8 fn = PCI_FUNC(devfn);
-+
-+ if (slot > 1) {
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ } else if (slot == 0) {
-+ addr = PCI_DEV0_IDSEL + where;
-+ } else {
-+ addr = PCI_DEV1_IDSEL + where;
-+ }
-+
-+ addr += (fn << 8);
-+
-+ cmd = PCI_CMD_CFG_WRITE;
-+ if (size == 1) {
-+ pci_write_u8(cmd, addr, (u8)value);
-+ } else if (size == 2) {
-+ pci_write_u16(cmd, addr, (u16)value);
-+ } else {
-+ pci_write_u32(cmd, addr, value);
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
-+{
-+ return -EIO;
-+}
-+EXPORT_SYMBOL(pci_set_dma_max_seg_size);
-+
-+int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
-+{
-+ return -EIO;
-+}
-+EXPORT_SYMBOL(pci_set_dma_seg_boundary);
-+
-+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
-+{
-+ resource_size_t start = pci_resource_start(dev, bar);
-+ resource_size_t len = pci_resource_len(dev, bar);
-+ unsigned long flags = pci_resource_flags(dev, bar);
-+
-+ if (!len || !start) {
-+ return NULL;
-+ }
-+
-+ if (maxlen && len > maxlen) {
-+ len = maxlen;
-+ }
-+
-+ if (flags & IORESOURCE_IO) {
-+ return ioport_map(start, len);
-+ }
-+
-+ if (flags & IORESOURCE_MEM) {
-+ if (flags & IORESOURCE_CACHEABLE) {
-+ return ioremap(start, len);
-+ }
-+ return ioremap_nocache(start, len);
-+ }
-+ return NULL;
-+}
-+EXPORT_SYMBOL(pci_iomap);
-+
-+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-+{
-+ if ((unsigned long)addr >= VMALLOC_START &&
-+ (unsigned long)addr < VMALLOC_END) {
-+ iounmap(addr);
-+ }
-+}
-+EXPORT_SYMBOL(pci_iounmap);
-+
-+/*
-+ * From arch/arm/kernel/bios32.c
-+ *
-+ * PCI bios-type initialisation for PCI machines
-+ *
-+ * Bits taken from various places.
-+ */
-+static void __init pcibios_init_hw(struct hw_pci *hw)
-+{
-+ struct pci_sys_data *sys = NULL;
-+ int ret;
-+ int nr, busnr;
-+
-+ for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
-+ sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
-+ if (!sys)
-+ panic("PCI: unable to allocate sys data!");
-+
-+ sys->hw = hw;
-+ sys->busnr = busnr;
-+ sys->map_irq = hw->map_irq;
-+ sys->resource[0] = &ioport_resource;
-+ sys->resource[1] = &iomem_resource;
-+
-+ ret = hw->setup(nr, sys);
-+
-+ if (ret > 0) {
-+ sys->bus = hw->scan(nr, sys);
-+
-+ if (!sys->bus)
-+ panic("PCI: unable to scan bus!");
-+
-+ busnr = sys->bus->subordinate + 1;
-+
-+ list_add(&sys->node, &hw->buses);
-+ } else {
-+ kfree(sys);
-+ if (ret < 0)
-+ break;
-+ }
-+ }
-+}
-+
-+/*
-+ * Swizzle the device pin each time we cross a bridge.
-+ * This might update pin and returns the slot number.
-+ */
-+static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
-+{
-+ struct pci_sys_data *sys = dev->sysdata;
-+ int slot = 0, oldpin = *pin;
-+
-+ if (sys->swizzle)
-+ slot = sys->swizzle(dev, pin);
-+
-+ if (debug_pci)
-+ printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
-+ pci_name(dev), oldpin, *pin, slot);
-+ return slot;
-+}
-+
-+/*
-+ * Map a slot/pin to an IRQ.
-+ */
-+static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ struct pci_sys_data *sys = dev->sysdata;
-+ int irq = -1;
-+
-+ if (sys->map_irq)
-+ irq = sys->map_irq(dev, slot, pin);
-+
-+ if (debug_pci)
-+ printk("PCI: %s mapping slot %d pin %d => irq %d\n",
-+ pci_name(dev), slot, pin, irq);
-+
-+ return irq;
-+}
-+
-+void __init pci_common_init(struct hw_pci *hw)
-+{
-+ struct pci_sys_data *sys;
-+
-+ INIT_LIST_HEAD(&hw->buses);
-+
-+ if (hw->preinit)
-+ hw->preinit();
-+ pcibios_init_hw(hw);
-+ if (hw->postinit)
-+ hw->postinit();
-+
-+ pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
-+ list_for_each_entry(sys, &hw->buses, node) {
-+ struct pci_bus *bus = sys->bus;
-+ /*
-+ * Size the bridge windows.
-+ */
-+ pci_bus_size_bridges(bus);
-+ /*
-+ * Assign resources.
-+ */
-+ pci_bus_assign_resources(bus);
-+
-+ /*
-+ * Tell drivers about devices found.
-+ */
-+ pci_bus_add_devices(bus);
-+ }
-+}
-+
-+char * __init pcibios_setup(char *str)
-+{
-+ if (!strcmp(str, "debug")) {
-+ debug_pci = 1;
-+ return NULL;
-+ }
-+ return str;
-+}
-+
-+/*
-+ * From arch/i386/kernel/pci-i386.c:
-+ *
-+ * We need to avoid collisions with `mirrored' VGA ports
-+ * and other strange ISA hardware, so we always want the
-+ * addresses to be allocated in the 0x000-0x0ff region
-+ * modulo 0x400.
-+ *
-+ * Why? Because some silly external IO cards only decode
-+ * the low 10 bits of the IO address. The 0x00-0xff region
-+ * is reserved for motherboard devices that decode all 16
-+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
-+ * but we want to try to avoid allocating at 0x2900-0x2bff
-+ * which might be mirrored at 0x0100-0x03ff..
-+ */
-+void pcibios_align_resource(void *data, struct resource *res,
-+ resource_size_t size, resource_size_t align)
-+{
-+ resource_size_t start = res->start;
-+
-+ if (res->flags & IORESOURCE_IO && start & 0x300)
-+ start = (start + 0x3ff) & ~0x3ff;
-+
-+ res->start = (start + align - 1) & ~(align - 1);
-+}
-+
-+
-+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-+{
-+ if (debug_pci)
-+ printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev));
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-+}
-+
-+/*
-+ * If the bus contains any of these devices, then we must not turn on
-+ * parity checking of any kind. Currently this is CyberPro 20x0 only.
-+ */
-+static inline int pdev_bad_for_parity(struct pci_dev *dev)
-+{
-+ return (dev->vendor == PCI_VENDOR_ID_INTERG &&
-+ (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
-+ dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
-+ (dev->vendor == PCI_VENDOR_ID_ITE &&
-+ dev->device == PCI_DEVICE_ID_ITE_8152);
-+
-+}
-+
-+/*
-+ * Adjust the device resources from bus-centric to Linux-centric.
-+ */
-+static void __devinit
-+pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev)
-+{
-+ resource_size_t offset;
-+ int i;
-+
-+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-+ if (dev->resource[i].start == 0)
-+ continue;
-+ if (dev->resource[i].flags & IORESOURCE_MEM)
-+ offset = root->mem_offset;
-+ else
-+ offset = root->io_offset;
-+
-+ dev->resource[i].start += offset;
-+ dev->resource[i].end += offset;
-+ }
-+}
-+
-+static void __devinit
-+pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
-+{
-+ struct pci_dev *dev = bus->self;
-+ int i;
-+
-+ if (!dev) {
-+ /*
-+ * Assign root bus resources.
-+ */
-+ for (i = 0; i < 3; i++)
-+ bus->resource[i] = root->resource[i];
-+ }
-+}
-+
-+/*
-+ * pcibios_fixup_bus - Called after each bus is probed,
-+ * but before its children are examined.
-+ */
-+void pcibios_fixup_bus(struct pci_bus *bus)
-+{
-+ struct pci_sys_data *root = bus->sysdata;
-+ struct pci_dev *dev;
-+ u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
-+ PCI_COMMAND_FAST_BACK;
-+
-+ pbus_assign_bus_resources(bus, root);
-+
-+ /*
-+ * Walk the devices on this bus, working out what we can
-+ * and can't support.
-+ */
-+ list_for_each_entry(dev, &bus->devices, bus_list) {
-+ u16 status;
-+
-+ pdev_fixup_device_resources(root, dev);
-+
-+ pci_read_config_word(dev, PCI_STATUS, &status);
-+
-+ /*
-+ * If any device on this bus does not support fast back
-+ * to back transfers, then the bus as a whole is not able
-+ * to support them. Having fast back to back transfers
-+ * on saves us one PCI cycle per transaction.
-+ */
-+ if (!(status & PCI_STATUS_FAST_BACK))
-+ features &= ~PCI_COMMAND_FAST_BACK;
-+
-+ if (pdev_bad_for_parity(dev))
-+ features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
-+
-+ switch (dev->class >> 8) {
-+ case PCI_CLASS_BRIDGE_PCI:
-+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
-+ status |= PCI_BRIDGE_CTL_PARITY |
-+ PCI_BRIDGE_CTL_MASTER_ABORT;
-+ status &= ~(PCI_BRIDGE_CTL_BUS_RESET |
-+ PCI_BRIDGE_CTL_FAST_BACK);
-+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
-+ break;
-+
-+ case PCI_CLASS_BRIDGE_CARDBUS:
-+ pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-+ &status);
-+ status |= PCI_CB_BRIDGE_CTL_PARITY |
-+ PCI_CB_BRIDGE_CTL_MASTER_ABORT;
-+ pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-+ status);
-+ break;
-+ }
-+ }
-+
-+ /*
-+ * Now walk the devices again, this time setting them up.
-+ */
-+ list_for_each_entry(dev, &bus->devices, bus_list) {
-+ u16 cmd;
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd |= features;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-+ L1_CACHE_BYTES >> 2);
-+ }
-+
-+ /*
-+ * Propagate the flags to the PCI bridge.
-+ */
-+ if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-+ if (features & PCI_COMMAND_FAST_BACK)
-+ bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
-+ if (features & PCI_COMMAND_PARITY)
-+ bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
-+ }
-+
-+ /*
-+ * Report what we did for this bus
-+ */
-+ printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
-+ bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-+}
-+/*
-+ * Convert from Linux-centric to bus-centric addresses for bridge devices.
-+ */
-+void
-+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-+ struct resource *res)
-+{
-+ struct pci_sys_data *root = dev->sysdata;
-+ unsigned long offset = 0;
-+
-+ if (res->flags & IORESOURCE_IO)
-+ offset = root->io_offset;
-+ if (res->flags & IORESOURCE_MEM)
-+ offset = root->mem_offset;
-+
-+ region->start = res->start - offset;
-+ region->end = res->end - offset;
-+}
-+
-+void __devinit
-+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-+ struct pci_bus_region *region)
-+{
-+ struct pci_sys_data *root = dev->sysdata;
-+ unsigned long offset = 0;
-+
-+ if (res->flags & IORESOURCE_IO)
-+ offset = root->io_offset;
-+ if (res->flags & IORESOURCE_MEM)
-+ offset = root->mem_offset;
-+
-+ res->start = region->start + offset;
-+ res->end = region->end + offset;
-+}
-+
-+#ifdef CONFIG_HOTPLUG
-+EXPORT_SYMBOL(pcibios_fixup_bus);
-+EXPORT_SYMBOL(pcibios_resource_to_bus);
-+EXPORT_SYMBOL(pcibios_bus_to_resource);
-+#endif
-+
-+/**
-+ * pcibios_enable_device - Enable I/O and memory.
-+ * @dev: PCI device to be enabled
-+ */
-+int pcibios_enable_device(struct pci_dev *dev, int mask)
-+{
-+ u16 cmd, old_cmd;
-+ int idx;
-+ struct resource *r;
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ old_cmd = cmd;
-+ for (idx = 0; idx < 6; idx++) {
-+ /* Only set up the requested stuff */
-+ if (!(mask & (1 << idx)))
-+ continue;
-+
-+ r = dev->resource + idx;
-+ if (!r->start && r->end) {
-+ printk(KERN_ERR "PCI: Device %s not available because"
-+ " of resource collisions\n", pci_name(dev));
-+ return -EINVAL;
-+ }
-+ if (r->flags & IORESOURCE_IO)
-+ cmd |= PCI_COMMAND_IO;
-+ if (r->flags & IORESOURCE_MEM)
-+ cmd |= PCI_COMMAND_MEMORY;
-+ }
-+
-+ /*
-+ * Bridges (eg, cardbus bridges) need to be fully enabled
-+ */
-+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-+ cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-+
-+ if (cmd != old_cmd) {
-+ printk("PCI: enabling device %s (%04x -> %04x)\n",
-+ pci_name(dev), old_cmd, cmd);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ }
-+ return 0;
-+}
-+
-+
-+struct pci_ops ubi32_pci_ops = {
-+ .read = ubi32_pci_read_config,
-+ .write = ubi32_pci_write_config,
-+};
-+
-+static struct pci_bus *ubi32_pci_scan_bus(int nr, struct pci_sys_data *sys)
-+{
-+ return pci_scan_bus(sys->busnr, &ubi32_pci_ops, sys);
-+}
-+
-+#define UBI32_PCI_MEM_BASE PCI_DEV_REG_BASE
-+#define UBI32_PCI_MEM_LEN 0x80000000
-+
-+#define UBI32_PCI_IO_BASE 0x0
-+#define UBI32_PCI_IO_END 0x0
-+
-+static struct resource ubi32_pci_mem = {
-+ .name = "PCI memory space",
-+ .start = UBI32_PCI_MEM_BASE,
-+ .end = UBI32_PCI_MEM_BASE + UBI32_PCI_MEM_LEN - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource ubi32_pci_io = {
-+ .name = "PCI IO space",
-+ .start = UBI32_PCI_IO_BASE,
-+ .end = UBI32_PCI_IO_END,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static int __init ubi32_pci_setup(int nr, struct pci_sys_data *sys)
-+{
-+ if (nr > 0)
-+ return 0;
-+
-+ request_resource(&iomem_resource, &ubi32_pci_mem);
-+ request_resource(&ioport_resource, &ubi32_pci_io);
-+
-+ sys->resource[0] = &ubi32_pci_io;
-+ sys->resource[1] = &ubi32_pci_mem;
-+ sys->resource[2] = NULL;
-+
-+ return 1;
-+}
-+
-+static void __init ubi32_pci_preinit(void)
-+{
-+}
-+
-+static int __init ubi32_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return pci_node->dn.recvirq;
-+}
-+
-+struct hw_pci ubi32_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = ubi32_pci_preinit,
-+ .setup = ubi32_pci_setup,
-+ .scan = ubi32_pci_scan_bus,
-+ .map_irq = ubi32_pci_map_irq,
-+};
-+
-+static int __init ubi32_pci_init(void)
-+{
-+ pci_node = (struct pci_devnode *)devtree_find_node("pci");
-+ if (pci_node == NULL) {
-+ printk(KERN_WARNING "PCI init failed\n");
-+ return -ENOSYS;
-+ }
-+ pci_common_init(&ubi32_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(ubi32_pci_init);
-+
-+/*
-+ * workaround for dual PCI card interrupt
-+ */
-+#define PCI_COMMON_INT_BIT (1 << 19)
-+void ubi32_pci_int_wr(void)
-+{
-+ volatile unsigned int pci_int_line;
-+ pci_int_line = UBICOM32_IO_PORT(RB)->gpio_in;
-+ if (!(pci_int_line & PCI_COMMON_INT_BIT))
-+ {
-+ ubicom32_set_interrupt(pci_node->dn.recvirq);
-+ }
-+}
-+EXPORT_SYMBOL(ubi32_pci_int_wr);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/plio.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/plio.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/plio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/plio.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,92 @@
-+/*
-+ * plio.c
-+ * PLIO state machine support functions
-+ *
-+ * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All rights reserved.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can
-+ * redistribute it and/or modify it under the terms of the GNU General
-+ * Public License as published by the Free Software Foundation, either
-+ * version 2 of the License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+ * See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/delay.h>
-+#include <asm/plio.h>
-+
-+/*
-+ * plio_reset
-+ * Select and reset PLIO function
-+ */
-+static void plio_reset(const plio_fctl_t *plio_fctl) {
-+ plio_io_function_t plio_function = {
-+ .fn_sel = PLIO_FN,
-+ .fn_reset = 1,
-+ };
-+
-+ /*
-+ * enable extension port
-+ */
-+ PEXT_NBR->function = plio_function;
-+
-+ /*
-+ * program clock dividers
-+ */
-+ PLIO_NBR->fctl2 = plio_fctl->fctl2;
-+
-+ /*
-+ * select plio function and assert function reset
-+ */
-+ plio_function.br_thread = thread_get_self();
-+ plio_function.fn_reset = 1;
-+ PLIO_NBR->function = plio_function;
-+
-+ /*
-+ * program plio controls
-+ */
-+ PLIO_NBR->fctl0 = plio_fctl->fctl0;
-+ PLIO_NBR->fctl1 = plio_fctl->fctl1;
-+
-+ /*
-+ * deassert function reset
-+ */
-+ plio_function.fn_reset = 0;
-+ PLIO_NBR->function = plio_function;
-+}
-+
-+/*
-+ * plio_init
-+ * configure and initialize PLIO.
-+ */
-+void plio_init(const plio_fctl_t *plio_fctl, const plio_config_t *plio_config, const plio_sram_t plio_sram_cfg[], int sram_cfg_size){
-+ /*
-+ * first reset to start plio clock
-+ */
-+ plio_reset(plio_fctl);
-+
-+ udelay(1);
-+
-+ /*
-+ * configure pfsm
-+ */
-+ PLIO_NBR->fctl0.pfsm_prog = 1;
-+ memcpy(PLIO_BR->pfsm_sram, plio_sram_cfg, sram_cfg_size);
-+ PLIO_NBR->fctl0.pfsm_prog = 0;
-+
-+ /*
-+ * program rest of plio
-+ */
-+ memcpy(&PLIO_BR->config, plio_config, sizeof(plio_config_t));
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/profile.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/profile.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/profile.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/profile.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,549 @@
-+/*
-+ * arch/ubicom32/mach-common/profile.c
-+ * Implementation for Ubicom32 Profiler
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include "profile.h"
-+#include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
-+#include <linux/mm.h>
-+#include <linux/mmzone.h>
-+#include <linux/fs.h>
-+#include <linux/page-flags.h>
-+#include <asm/uaccess.h>
-+#include <asm/devtree.h>
-+#include <asm/profilesample.h>
-+#include <asm/memory_map.h>
-+#include <asm/page.h>
-+#include <asm/ip5000.h>
-+
-+/*
-+ * spacs for all memory blocks so we can hold locks for short time when walking tables
-+ */
-+#define PROFILE_NUM_MAPS 5000
-+static struct profile_map profile_pm[PROFILE_NUM_MAPS];
-+
-+static struct profilenode *node = NULL;
-+static int profile_first_packet = 1;
-+
-+static int profile_open(struct inode *inode, struct file *filp)
-+{
-+ if (!node) {
-+ return -ENOENT;
-+ }
-+ node->busy = 1;
-+ if (!node->enabled) {
-+ node->enabled = 1;
-+ node->busy = 0;
-+ profile_first_packet = 1;
-+ return 0;
-+ }
-+ node->busy = 0;
-+ return -EBUSY;
-+}
-+
-+static int profile_sequence_num;
-+
-+/*
-+ * make a packet full of sample data
-+ */
-+static int profile_make_data_packet(char *buf, int count)
-+{
-+ int samples; /* number of samples requested */
-+ int i;
-+ struct profile_header ph;
-+ char *ptr;
-+
-+ if (count < sizeof(struct profile_header) + sizeof(struct profile_sample)) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * fill in the packet header
-+ */
-+ memset(&ph, 0, sizeof(struct profile_header));
-+ ph.magic = PROF_MAGIC + PROFILE_VERSION;
-+ ph.header_size = sizeof(struct profile_header);
-+ ph.clocks = node->clocks;
-+ for (i = 0; i < PROFILE_MAX_THREADS; ++i) {
-+ ph.instruction_count[i] = node->inst_count[i];
-+ }
-+ ph.profile_instructions = 0;
-+ ph.enabled = node->enabled_threads;
-+ ph.hrt = node->hrt;
-+ ph.high = 0;
-+ ph.profiler_thread = node->profiler_thread;
-+ ph.clock_freq = node->clock_freq;
-+ ph.seq_num = profile_sequence_num++;
-+ ph.cpu_id = node->cpu_id;
-+ ph.perf_counters[0] = node->stats[0];
-+ ph.perf_counters[1] = node->stats[1];
-+ ph.perf_counters[2] = node->stats[2];
-+ ph.perf_counters[3] = node->stats[3];
-+ ph.ddr_freq = node->ddr_freq;
-+
-+ ptr = buf + sizeof(struct profile_header);
-+
-+ samples = (count - sizeof(struct profile_header)) / sizeof(struct profile_sample);
-+ for (i = 0; i < samples && node->count; ++i) {
-+ if (copy_to_user(ptr, &node->samples[node->tail], sizeof(struct profile_sample)) != 0) {
-+ return -EFAULT;
-+ }
-+ node->count--;
-+ node->tail++;
-+ if (node->tail >= node->max_samples) {
-+ node->tail = 0;
-+ }
-+ ptr += sizeof(struct profile_sample);
-+ }
-+ ph.sample_count = i;
-+ if (copy_to_user(buf, &ph, sizeof(struct profile_header)) != 0) {
-+ return -EFAULT;
-+ }
-+ if (ph.sample_count == 0)
-+ return 0;
-+ else
-+ return sizeof(struct profile_header) + ph.sample_count * sizeof(struct profile_sample);
-+}
-+
-+static void profile_get_memory_stats(unsigned int *total_free, unsigned int *max_free)
-+{
-+ struct list_head *p;
-+ struct zone *zone;
-+ unsigned int size;
-+
-+ *total_free = 0;
-+ *max_free = 0;
-+
-+ /*
-+ * get all the free regions. In each zone, the array of free_area lists contains the first page of each frame of size 1 << order
-+ */
-+ for_each_zone(zone) {
-+ unsigned long order, flags, i;
-+
-+ if (!populated_zone(zone))
-+ continue;
-+
-+ if (!is_normal(zone))
-+ continue;
-+
-+ spin_lock_irqsave(&zone->lock, flags);
-+ for_each_migratetype_order(order, i) {
-+ size = ((1 << order) << PAGE_SHIFT) >> 10;
-+ list_for_each(p, &(zone->free_area[order].free_list[i])) {
-+ if (size > *max_free) {
-+ *max_free = size;
-+ }
-+ *total_free += size;
-+ }
-+ }
-+ spin_unlock_irqrestore(&zone->lock, flags);
-+ }
-+}
-+
-+struct profile_counter_pkt profile_builtin_stats[] =
-+{
-+ {
-+ "Free memory(KB)", 0
-+ },
-+ {
-+ "Max free Block(KB)", 0
-+ }
-+};
-+
-+/*
-+ * make a packet full of performance counters
-+ */
-+static char prof_pkt[PROFILE_MAX_PACKET_SIZE];
-+static int profile_make_stats_packet(char *buf, int count)
-+{
-+ char *ptr = prof_pkt;
-+ struct profile_header_counters hdr;
-+ int stat_count = 0;
-+ int i;
-+ unsigned int total_free, max_free;
-+ int builtin_count = sizeof(profile_builtin_stats) / sizeof(struct profile_counter_pkt);
-+
-+ if (count > PROFILE_MAX_PACKET_SIZE) {
-+ count = PROFILE_MAX_PACKET_SIZE;
-+ }
-+ stat_count = (count - sizeof(struct profile_header_counters)) / sizeof (struct profile_counter_pkt);
-+ stat_count -= builtin_count;
-+
-+ if (stat_count <= 0) {
-+ return 0;
-+ }
-+
-+ if (stat_count > node->num_counters) {
-+ stat_count = node->num_counters;
-+ }
-+
-+ hdr.magic = PROF_MAGIC_COUNTERS;
-+ hdr.ultra_sample_time = node->clocks;
-+ hdr.ultra_count = stat_count;
-+ hdr.linux_sample_time = UBICOM32_IO_TIMER->sysval;
-+ hdr.linux_count = builtin_count;
-+ memcpy(ptr, (void *)&hdr, sizeof(struct profile_header_counters));
-+ ptr += sizeof(struct profile_header_counters);
-+
-+
-+ for (i = 0; i < stat_count; ++i) {
-+ memcpy(ptr, (void *)(&(node->counters[i])), sizeof(struct profile_counter));
-+ ptr += sizeof(struct profile_counter);
-+ }
-+
-+ /*
-+ * built in statistics
-+ */
-+ profile_get_memory_stats(&total_free, &max_free);
-+ profile_builtin_stats[0].value = total_free;
-+ profile_builtin_stats[1].value = max_free;
-+ memcpy(ptr, (void *)profile_builtin_stats, sizeof(profile_builtin_stats));
-+ ptr += sizeof(profile_builtin_stats);
-+
-+ if (copy_to_user(buf, prof_pkt, ptr - prof_pkt) != 0) {
-+ return -EFAULT;
-+ }
-+ return ptr - prof_pkt;
-+}
-+
-+/*
-+ * return a udp packet ready to send to the profiler tool
-+ * when there are no packets left to make, return 0
-+ */
-+static int profile_read(struct file *filp, char *buf, size_t count, loff_t *f_pos)
-+{
-+ int result = 0;
-+ if (!node) {
-+ return -ENOENT;
-+ }
-+ node->busy = 1;
-+ if (!node->enabled) {
-+ node->busy = 0;
-+ return -EPERM;
-+ }
-+ if (!node->samples) {
-+ node->busy = 0;
-+ return -ENOMEM;
-+ }
-+
-+ if (profile_first_packet) {
-+ result = profile_make_stats_packet(buf, count);
-+ profile_first_packet = 0;
-+ }
-+ if (result == 0) {
-+ result = profile_make_data_packet(buf, count);
-+ if (result == 0) {
-+ profile_first_packet = 1;
-+ }
-+ }
-+ node->busy = 0;
-+ return result;
-+
-+}
-+
-+static int profile_release(struct inode *inode, struct file *filp)
-+{
-+ if (!node) {
-+ return -ENOENT;
-+ }
-+ node->busy = 1;
-+ if (node->enabled) {
-+ node->enabled = 0;
-+ node->count = 0;
-+ node->tail = node->head;
-+ node->busy = 0;
-+ return 0;
-+ }
-+ node->busy = 0;
-+ profile_first_packet = 1;
-+ return -EBADF;
-+}
-+
-+static const struct file_operations profile_fops = {
-+ .open = profile_open,
-+ .read = profile_read,
-+ .release = profile_release,
-+};
-+
-+static int page_aligned(void *x)
-+{
-+ return !((unsigned int)x & ((1 << PAGE_SHIFT) - 1));
-+}
-+
-+static int profile_maps_open(struct inode *inode, struct file *filp)
-+{
-+ struct rb_node *rb;
-+ int num = 0;
-+ int slab_start;
-+ struct vm_area_struct *vma;
-+ int type = PROFILE_MAP_TYPE_UNKNOWN;
-+ int flags, i;
-+ struct list_head *p;
-+ struct zone *zone;
-+
-+ /*
-+ * get the slab data (first so dups will show up as vmas)
-+ */
-+ slab_start = num;
-+ num += kmem_cache_block_info("size-512", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("size-1024", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("size-2048", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("size-4096", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("size-8192", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+
-+ for (i = slab_start; i < num; ++i) {
-+ profile_pm[i].type_size |= PROFILE_MAP_TYPE_SMALL << PROFILE_MAP_TYPE_SHIFT;
-+ }
-+
-+ slab_start = num;
-+ num += kmem_cache_block_info("dentry", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("inode_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("sysfs_dir_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+ num += kmem_cache_block_info("proc_inode_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num);
-+
-+ for (i = slab_start; i < num; ++i) {
-+ profile_pm[i].type_size |= PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT;
-+ }
-+
-+ /*
-+ * get all the vma regions (allocated by mmap, most likely
-+ */
-+#if 0
-+ down_read(&nommu_vma_sem);
-+ for (rb = rb_first(&nommu_vma_tree); rb && num < PROFILE_NUM_MAPS; rb = rb_next(rb)) {
-+ vma = rb_entry(rb, struct vm_area_struct, vm_rb);
-+ profile_pm[num].start = (vma->vm_start - SDRAMSTART) >> PAGE_SHIFT;
-+ profile_pm[num].type_size = (vma->vm_end - vma->vm_start + (1 << PAGE_SHIFT) - 1) >> PAGE_SHIFT;
-+ flags = vma->vm_flags & 0xf;
-+ if (flags == (VM_READ | VM_EXEC)) {
-+ type = PROFILE_MAP_TYPE_TEXT;
-+ } else if (flags == (VM_READ | VM_WRITE | VM_EXEC)) {
-+ type = PROFILE_MAP_TYPE_STACK;
-+ } else if (flags == (VM_READ | VM_WRITE)) {
-+ type = PROFILE_MAP_TYPE_APP_DATA;
-+ }
-+ profile_pm[num].type_size |= type << PROFILE_MAP_TYPE_SHIFT;
-+ num++;
-+ }
-+ up_read(&nommu_vma_sem);
-+ if (rb) {
-+ return -ENOMEM;
-+ }
-+#endif
-+
-+ /*
-+ * get all the free regions. In each zone, the array of free_area lists contains the first page of each frame of size 1 << order
-+ */
-+ for_each_zone(zone) {
-+ unsigned long order, flags, i;
-+ struct page *page;
-+
-+ if (!populated_zone(zone))
-+ continue;
-+
-+ if (!is_normal(zone))
-+ continue;
-+
-+ spin_lock_irqsave(&zone->lock, flags);
-+ for_each_migratetype_order(order, i) {
-+ list_for_each(p, &(zone->free_area[order].free_list[i])) {
-+ page = list_entry(p, struct page, lru);
-+ profile_pm[num].start = ((page_to_phys(page) - SDRAMSTART) >> PAGE_SHIFT) - 0x40;
-+ profile_pm[num].type_size = (PROFILE_MAP_TYPE_FREE << PROFILE_MAP_TYPE_SHIFT) | order;
-+ num++;
-+ if (num >= PROFILE_NUM_MAPS) {
-+ spin_unlock_irqrestore(&zone->lock, flags);
-+ return -ENOMEM;
-+ }
-+ }
-+ }
-+ spin_unlock_irqrestore(&zone->lock, flags);
-+ }
-+
-+ /*
-+ * get the filesystem inodes
-+ */
-+ list_for_each(p, &(super_blocks)) {
-+ struct super_block *sb;
-+ struct list_head *q;
-+ if (num >= PROFILE_NUM_MAPS)
-+ break;
-+ sb = list_entry(p, struct super_block, s_list);
-+ if (page_aligned(sb)) {
-+ profile_pm[num].start = ((unsigned int)sb - SDRAMSTART) >> PAGE_SHIFT;
-+ profile_pm[num].type_size = (PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT);
-+ num++;
-+ }
-+ list_for_each(q, &(sb->s_inodes)) {
-+ struct inode *in;
-+ if (num >= PROFILE_NUM_MAPS)
-+ break;
-+ in = list_entry(q, struct inode, i_sb_list);
-+ if (page_aligned(in)) {
-+ profile_pm[num].start = ((unsigned int)in - SDRAMSTART) >> PAGE_SHIFT;
-+ profile_pm[num].type_size = (PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT);
-+ num++;
-+ }
-+ }
-+ }
-+
-+ /*
-+ * get the buffer cache pages
-+ */
-+ for (i = 0; i < num_physpages && num < PROFILE_NUM_MAPS; ++i) {
-+ if ((mem_map + i)->flags & (1 << PG_lru)) {
-+ int start = i;
-+ while ((mem_map + i)->flags & (1 << PG_lru) && i < num_physpages)
-+ i++;
-+ profile_pm[num].start = start;
-+ profile_pm[num].type_size = (i - start) | (PROFILE_MAP_TYPE_CACHE << PROFILE_MAP_TYPE_SHIFT);
-+ num++;
-+ }
-+ }
-+
-+ filp->private_data = (void *)num;
-+ return 0;
-+}
-+
-+/*
-+ * return one packet of map data, or 0 if all maps have been returned already
-+ */
-+static int profile_maps_read(struct file *filp, char *buf, size_t count, loff_t *f_pos)
-+{
-+ struct profile_header_maps header;
-+ char *p = buf + sizeof(header);
-+ int total = (int)filp->private_data;
-+
-+ header.count = (count - sizeof(header)) / sizeof(struct profile_map);
-+ if (header.count > PROFILE_MAX_MAPS) {
-+ header.count = PROFILE_MAX_MAPS;;
-+ }
-+ if (header.count > total - *f_pos) {
-+ header.count = total - *f_pos;
-+ }
-+
-+ if (header.count == 0) {
-+ return 0;
-+ }
-+
-+ header.magic = PROF_MAGIC_MAPS;
-+ header.page_shift = PAGE_SHIFT;
-+
-+ if (copy_to_user(buf, &header, sizeof(header)) != 0) {
-+ return -EFAULT;
-+ }
-+ if (copy_to_user(p, (void *)&profile_pm[*f_pos], sizeof(struct profile_map) * header.count) != 0) {
-+ return -EFAULT;
-+ }
-+ *f_pos += header.count;
-+
-+ return sizeof(header) + sizeof(struct profile_map) * header.count;
-+}
-+
-+static int profile_maps_release(struct inode *inode, struct file *filp)
-+{
-+ return 0;
-+}
-+
-+static const struct file_operations profile_maps_fops = {
-+ .open = profile_maps_open,
-+ .read = profile_maps_read,
-+ .release = profile_maps_release,
-+};
-+
-+static int profile_rate_show(struct seq_file *m, void *v)
-+{
-+ if (node) {
-+ seq_printf(m, "%d samples per second. %d virtual counters.\n", node->rate, node->num_counters);
-+ } else {
-+ seq_printf(m, "Profiler is not initialized.\n");
-+ }
-+ return 0;
-+}
-+
-+static int profile_rate_open(struct inode *inode, struct file *filp)
-+{
-+ return single_open(filp, profile_rate_show, NULL);
-+}
-+
-+static int profile_rate_write(struct file *filp, const char *buf, size_t len, loff_t *off)
-+{
-+ *off = 0;
-+ return 0;
-+}
-+
-+static const struct file_operations profile_rate_fops = {
-+ .open = profile_rate_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+ .write = profile_rate_write,
-+};
-+
-+int ubi32_profile_init_module(void)
-+{
-+ struct proc_dir_entry *pdir;
-+
-+ /*
-+ * find the device
-+ */
-+ node = (struct profilenode *)devtree_find_node("profiler");
-+ if (!node) {
-+ printk(KERN_INFO "Profiler does not exist.\n");
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * allocate the sample buffer
-+ */
-+ node->max_samples = PROFILE_MAX_SAMPLES;
-+ node->samples = kmalloc(node->max_samples * sizeof(struct profile_sample), GFP_KERNEL);
-+ if (!node->samples) {
-+ printk(KERN_INFO "Profiler sample buffer kmalloc failed.\n");
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * connect to the file system
-+ */
-+ pdir = proc_mkdir("profile", NULL);
-+ if (!pdir) {
-+ return -ENOMEM;
-+ }
-+ if (!proc_create("data", 0, pdir, &profile_fops)) {
-+ return -ENOMEM;
-+ }
-+ if (!proc_create("rate", 0, pdir, &profile_rate_fops)) {
-+ return -ENOMEM;
-+ }
-+ if (!proc_create("maps", 0, pdir, &profile_maps_fops)) {
-+ return -ENOMEM;
-+ }
-+ return 0;
-+}
-+
-+
-+module_init(ubi32_profile_init_module);
-+
-+MODULE_AUTHOR("David Fotland");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/profile.h linux-2.6.30.10-ubi/arch/ubicom32/mach-common/profile.h
---- linux-2.6.30.10/arch/ubicom32/mach-common/profile.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/profile.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,82 @@
-+/*
-+ * arch/ubicom32/mach-common/profile.h
-+ * Private data for the profile module
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/types.h>
-+#include <asm/devtree.h>
-+#include "profpkt.h"
-+
-+#ifndef _PROFILE_H_
-+#define _PROFILE_H_
-+
-+#define PROFILE_MAX_THREADS 16
-+#define PROFILE_MAX_SAMPLES 1024
-+
-+struct profile_sample;
-+struct oprofile_sample;
-+
-+/*
-+ * values chosen so all counter values fit in a single UDP packet
-+ */
-+#define PROFILE_NODE_MAX_COUNTERS 32
-+
-+struct profile_counter {
-+ char name[PROFILE_COUNTER_NAME_LENGTH];
-+ unsigned int value;
-+};
-+
-+struct profilenode {
-+ struct devtree_node dn;
-+ volatile u32_t enabled; /* Is the profiler enabled to take samples? */
-+ volatile u32_t busy; /* set when the samples are being read by the driver */
-+ volatile u32_t rate; /* What is the sampling rate? */
-+ volatile u32_t enabled_threads; /* which threads were enabled at the last sample time */
-+ volatile u32_t hrt; /* HRT threads */
-+ volatile u32_t profiler_thread; /* thread running the profile sampler */
-+ volatile u32_t clocks; /* system clock timer at last sample */
-+ volatile u32_t clock_freq; /* clock frequency in Hz */
-+ volatile u32_t ddr_freq; /* memory frequency */
-+ volatile u32_t cpu_id; /* chip_id register */
-+ volatile u32_t inst_count[PROFILE_MAX_THREADS]; /* sampled instruction counts at most recent sample */
-+ volatile u32_t stats[4]; /* contents of the cache statistics counters */
-+ volatile u16_t head; /* sample taker puts samples here */
-+ volatile u16_t tail; /* packet filler takes samples here */
-+ volatile u16_t count; /* number of valid samples */
-+ volatile u16_t max_samples; /* how many samples can be in the samples array */
-+ struct profile_sample *samples; /* samples array allocated by the linux driver */
-+ volatile u32_t num_counters; /* how many registered performance counters */
-+ volatile struct profile_counter counters[PROFILE_NODE_MAX_COUNTERS];
-+
-+ /* unimplemented interface for future oprofile work */
-+ volatile u16_t oprofile_head; /* sample taker puts samples here */
-+ volatile u16_t oprofile_tail; /* packet filler takes samples here */
-+ volatile u16_t oprofile_count; /* how many oprofile sampels are are in use */
-+ volatile u16_t oprofile_max_samples; /* samples array size for oprofile samples */
-+ struct oprofile_sample *oprofile_samples; /* oprofile sample buffer */
-+};
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/profpkt.h linux-2.6.30.10-ubi/arch/ubicom32/mach-common/profpkt.h
---- linux-2.6.30.10/arch/ubicom32/mach-common/profpkt.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/profpkt.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,158 @@
-+
-+/*
-+ * arch/ubicom32/mach-common/profpkt.c
-+ * Ubicom32 Profiler packet formats for communication between the linux proc driver and the profiler display tool
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#define PROFILE_PORT 51080
-+#define PROFILE_POSIX_NAME_LENGTH 32
-+
-+/*
-+ * profile UDP packet format for communicating between ip3k and host
-+ *
-+ * every packet starts with a header, followed by samples.
-+ * samples are only taken for non-hrt threads that are
-+ * active
-+ */
-+#define PROF_MAGIC 0x3ea0
-+#define PROF_MAGIC_COUNTERS 0x9ea0
-+#define PROF_MAGIC_MAPS 0xaea0
-+
-+/*
-+ * Versions (31 max):
-+ * 1 to 4 were before 6.0 release, development versions
-+ * 5 was forward compatible version, shipped with 6.0 and 6.1
-+ * 6 adds heap packets, and clock_freq to header, shipped with 6.2
-+ * 7 adds a sequence numbers to check for dropped packets, shipped with 6.3.5
-+ * 8 adds mqueue timing information, shipped with 6.3.5
-+ * 9 adds sdram heap size information, shipped with 6.4
-+ * 10 adds heapmem heap callers and long latency stack traces. shipped with 6.4
-+ * 11 adds support for Mars (IP5K). shipped with 6.10
-+ * 12 adds more support for Mars. Shipped with 7.0
-+ * 13 adds per sample latency measurement. Shipped with 7.2
-+ * 14 changes the heap format and adds a string packet. Shipped with 7.4
-+ * 15 adds dsr stats and posix. shipped with 7.6
-+ * 16 corrects maximum packet count for Ares. ships with 7.9
-+ * 17 adds a5 register value to sample
-+ */
-+
-+#define PROFILE_VERSION 17
-+#define PROFILE_MAX_PACKET_SIZE 1440
-+
-+#define PROFILE_MAX_THREADS 16
-+
-+/*
-+ * each packet starts with a profile_header, then sample_count samples
-+ * samples are gprof samples of pc, the return address, condition codes, and
-+ * active threads
-+ */
-+struct profile_header {
-+ u16_t magic; /* magic number and version */
-+ u8_t header_size; /* number of bytes in profile header */
-+ u8_t sample_count; /* number of samples in the packet */
-+ u32_t clocks; /* clock counter value */
-+ u32_t instruction_count[PROFILE_MAX_THREADS];
-+ /* instructions executed per thread */
-+ u32_t profile_instructions; /* instructions executed by profiler mainline */
-+ u16_t enabled; /* which threads are enabled */
-+ u16_t hrt; /* which threads are hrt */
-+ u16_t high; /* which threads are high priority */
-+ u16_t profiler_thread; /* which thread runs the profiler */
-+ u32_t heap_free; /* current free on-cihp heap space in bytes */
-+ u32_t heap_low_water; /* on-chip heap low water mark */
-+ u32_t netpage_free; /* number of free on-chip net pages */
-+ u32_t netpage_low_water; /* low water mark on free on-chip netpages */
-+ u32_t min_sp[PROFILE_MAX_THREADS];
-+ /* stack pointer values per thread */
-+ u32_t clock_freq; /* clock frequency (Hz) of system being analyzed */
-+ u32_t seq_num; /* to detect dropped profiler packets */
-+ u32_t timing_sequence; /* sample number since boot */
-+ u32_t timing_interval; /* second per sample timing interval */
-+ u32_t timing_worst_time; /* duration of longest finction called, in core clocks */
-+ u32_t timing_function; /* address of longest function */
-+ u32_t timing_average; /* average time of all functions in last interval */
-+ u32_t timing_count; /* number of functions called in last interval */
-+ u32_t extheap_free; /* current free extmem heap space in bytes */
-+ u32_t extheap_low_water; /* extmem heap low water mark */
-+ u32_t cpu_id; /* CHIP_ID register contents */
-+ u32_t perf_counters[4]; /* contents of the CPU performance counters */
-+ u8_t perf_config[4]; /* what is being counted */
-+ u32_t ddr_freq; /* DDR clock frequency */
-+ u32_t extnetpage_free; /* number of free off chip net pages */
-+ u32_t extnetpage_low_water; /* low water mark on off-chip free netpages */
-+ u32_t dsr_max_latency; /* max time to process a dsr interrupt, in clocks, since last packet */
-+ u32_t dsr_ave_latency; /* average dsr latency over last DSR_STATS_RECENT_COUNT interrupts */
-+ u32_t dsr_count; /* number of dsr interrupts since last packet */
-+};
-+
-+struct profile_header_counters {
-+ u16_t magic;
-+ u16_t ultra_count; /* how many ultra counters follow this */
-+ u32_t ultra_sample_time; /* in chip clocks */
-+ u32_t linux_count; /* how many linux counters follow this */
-+ u32_t linux_sample_time;
-+};
-+
-+/*
-+ * values chosen so all counter values fit in a single 1400 byte UDP packet
-+ */
-+#define PROFILE_COUNTER_NAME_LENGTH 20
-+#define PROFILE_MAX_COUNTERS ((PROFILE_MAX_PACKET_SIZE - sizeof(struct profile_header_counters)) / (PROFILE_COUNTER_NAME_LENGTH + 4))
-+
-+struct profile_counter_pkt {
-+ char name[PROFILE_COUNTER_NAME_LENGTH];
-+ unsigned int value;
-+};
-+
-+/*
-+ * send memory maps from linux to profiler tool
-+ */
-+
-+struct profile_header_maps {
-+ u16_t magic;
-+ u16_t count;
-+ u32_t page_shift;
-+};
-+
-+#define PROFILE_MAP_NUM_TYPES 32
-+
-+/* types 0-15: size field is order. True size is 2^order */
-+#define PROFILE_MAP_TYPE_UNKNOWN 0
-+#define PROFILE_MAP_TYPE_FREE 1
-+#define PROFILE_MAP_TYPE_SMALL 2
-+#define PROFILE_MAP_TYPE_FS 3
-+/* types 16-31: size field is pages. True size is (1 << PAGE_SHIFT) * size */
-+#define PROFILE_MAP_SIZE_TYPE 16
-+#define PROFILE_MAP_TYPE_TEXT 16
-+#define PROFILE_MAP_TYPE_STACK 17
-+#define PROFILE_MAP_TYPE_APP_DATA 18
-+#define PROFILE_MAP_TYPE_CACHE 19
-+#define PROFILE_MAP_RESERVED 24
-+
-+#define PROFILE_MAP_TYPE_SHIFT 11
-+#define PROFILE_MAP_SIZE_MASK 0x7ff
-+
-+struct profile_map {
-+ u16_t start; /* start page number of segment, relative to start of DRAM */
-+ u16_t type_size; /* type (4 bits) of the segment and size in pages (12 bits) */
-+};
-+
-+#define PROFILE_MAX_MAPS (PROFILE_MAX_PACKET_SIZE - sizeof(struct profile_header_maps)) / sizeof(struct profile_map)
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/ring_tio.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ring_tio.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/ring_tio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ring_tio.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,123 @@
-+/*
-+ * arch/ubicom32/mach-common/ring_tio.c
-+ * Generic initialization for UIO Ubicom32 Ring
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+
-+#include <asm/devtree.h>
-+#include <asm/ring_tio.h>
-+
-+static const char *ring_tio_driver_name = "uio_ubicom32ring";
-+
-+/*
-+ * The number of ring_tio's currently allocated, used for .id
-+ */
-+static int __initdata ring_tio_count;
-+
-+/*
-+ * The maximum number of resources that the ring_tio will have.
-+ * Currently 3, a register space, and up to 2 interrupts.
-+ */
-+#define RING_TIO_MAX_RESOURCES 3
-+
-+/*
-+ * ring_tio_init
-+ * Checks the device tree and instantiates the driver if found
-+ */
-+void __init ring_tio_init(const char *node_name)
-+{
-+ struct platform_device *pdev;
-+ struct resource *res;
-+ int resource_idx = 0;
-+ struct ring_tio_node *ring_node;
-+
-+ /*
-+ * Check the device tree for the ring_tio
-+ */
-+ ring_node = (struct ring_tio_node *)devtree_find_node(node_name);
-+ if (!ring_node) {
-+ printk(KERN_WARNING "Ring TIO '%s' not found\n", node_name);
-+ return;
-+ }
-+
-+ if (ring_node->version != RING_TIO_NODE_VERSION) {
-+ printk(KERN_WARNING "ring_tio not compatible\n");
-+ return;
-+ }
-+
-+ /*
-+ * Dynamically create the platform_device structure and resources
-+ */
-+ pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
-+ if (!pdev) {
-+ printk(KERN_WARNING "ring_tio could not alloc pdev\n");
-+ return;
-+ }
-+
-+ res = kzalloc(sizeof(struct resource) * RING_TIO_MAX_RESOURCES,
-+ GFP_KERNEL);
-+ if (!res) {
-+ kfree(pdev);
-+ printk(KERN_WARNING "ring_tio could not alloc res\n");
-+ return;
-+ }
-+
-+ pdev->name = ring_tio_driver_name;
-+ pdev->id = ring_tio_count++;
-+ pdev->resource = res;
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ res[resource_idx].start = (u32_t)(ring_node->regs);
-+ res[resource_idx].end = (u32_t)(ring_node->regs);
-+ res[resource_idx].flags = IORESOURCE_MEM;
-+ resource_idx++;
-+
-+ if (ring_node->dn.sendirq != 0xFF) {
-+ res[resource_idx].start = ring_node->dn.sendirq;
-+ res[resource_idx].flags = IORESOURCE_IRQ;
-+ resource_idx++;
-+ }
-+
-+ if (ring_node->dn.recvirq != 0xFF) {
-+ res[resource_idx].start = ring_node->dn.recvirq;
-+ res[resource_idx].flags = IORESOURCE_IRQ;
-+ resource_idx++;
-+ }
-+ pdev->num_resources = resource_idx;
-+
-+ printk(KERN_INFO "RingTIO.%d '%s' found irq=%d/%d regs=%p pdev=%p/%p\n",
-+ ring_tio_count - 1, node_name, ring_node->dn.sendirq,
-+ ring_node->dn.recvirq, ring_node->regs, pdev, res);
-+
-+ /*
-+ * Try to get the device registered
-+ */
-+ pdev->dev.platform_data = (void *)node_name;
-+ if (platform_device_register(pdev) < 0) {
-+ printk(KERN_WARNING "Ring failed to register\n");
-+ kfree(pdev);
-+ kfree(res);
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/switch-bcm539x.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-bcm539x.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/switch-bcm539x.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-bcm539x.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,1195 @@
-+/*
-+ * arch/ubicom32/mach-common/switch-bcm539x.c
-+ * BCM539X switch driver, SPI mode
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio.h>
-+#include <linux/delay.h>
-+#include <linux/mii.h>
-+
-+#include <asm/switch-dev.h>
-+#include <asm/ubicom32-spi-gpio.h>
-+#include "switch-core.h"
-+#include "switch-bcm539x-reg.h"
-+
-+#define DRIVER_NAME "bcm539x-spi"
-+#define DRIVER_VERSION "1.0"
-+
-+#undef BCM539X_DEBUG
-+#define BCM539X_SPI_RETRIES 100
-+
-+struct bcm539x_data {
-+ struct switch_device *switch_dev;
-+
-+ /*
-+ * Our private data
-+ */
-+ struct spi_device *spi;
-+ struct switch_core_platform_data *pdata;
-+
-+ /*
-+ * Last page we accessed
-+ */
-+ u8_t last_page;
-+
-+ /*
-+ * 539x Device ID
-+ */
-+ u8_t device_id;
-+};
-+
-+/*
-+ * bcm539x_wait_status
-+ * Waits for the specified bit in the status register to be set/cleared.
-+ */
-+static int bcm539x_wait_status(struct bcm539x_data *bd, u8_t mask, int set)
-+{
-+ u8_t txbuf[2];
-+ u8_t rxbuf;
-+ int i;
-+ int ret;
-+
-+ txbuf[0] = BCM539X_CMD_READ;
-+ txbuf[1] = BCM539X_GLOBAL_SPI_STATUS;
-+ for (i = 0; i < BCM539X_SPI_RETRIES; i++) {
-+ ret = spi_write_then_read(bd->spi, txbuf, 2, &rxbuf, 1);
-+ rxbuf &= mask;
-+ if ((set && rxbuf) || (!set && !rxbuf)) {
-+ return 0;
-+ }
-+ udelay(1);
-+ }
-+
-+ return -EIO;
-+}
-+
-+/*
-+ * bcm539x_set_page
-+ * Sets the register page for access (only if necessary)
-+ */
-+static int bcm539x_set_page(struct bcm539x_data *bd, u8_t page)
-+{
-+ u8_t txbuf[3];
-+
-+ if (page == bd->last_page) {
-+ return 0;
-+ }
-+
-+ bd->last_page = page;
-+
-+ txbuf[0] = BCM539X_CMD_WRITE;
-+ txbuf[1] = BCM539X_GLOBAL_PAGE;
-+ txbuf[2] = page;
-+
-+ return spi_write(bd->spi, txbuf, 3);
-+}
-+
-+/*
-+ * bcm539x_write_bytes
-+ * Writes a number of bytes to a given page and register
-+ */
-+static int bcm539x_write_bytes(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, void *buf, u8_t len)
-+{
-+ int ret;
-+ u8_t *txbuf;
-+
-+ txbuf = kmalloc(2 + len, GFP_KERNEL);
-+ if (!txbuf) {
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Make sure the chip has finished processing our previous request
-+ */
-+ ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_SPIF, 0);
-+ if (ret) {
-+ goto done;
-+ }
-+
-+ /*
-+ * Set the page
-+ */
-+ ret = bcm539x_set_page(bd, page);
-+ if (ret) {
-+ goto done;
-+ }
-+
-+ /*
-+ * Read the data
-+ */
-+ txbuf[0] = BCM539X_CMD_WRITE;
-+ txbuf[1] = reg;
-+ memcpy(&txbuf[2], buf, len);
-+
-+#ifdef BCM539X_DEBUG
-+ {
-+ int i;
-+ printk("write page %02x reg %02x len=%d buf=", page, reg, len);
-+ for (i = 0; i < len + 2; i++) {
-+ printk("%02x ", txbuf[i]);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+
-+ ret = spi_write(bd->spi, txbuf, 2 + len);
-+
-+done:
-+ kfree(txbuf);
-+ return ret;
-+}
-+
-+/*
-+ * bcm539x_write_32
-+ * Writes 32 bits of data to the given page and register
-+ */
-+static inline int bcm539x_write_32(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, u32_t data)
-+{
-+ data = cpu_to_le32(data);
-+ return bcm539x_write_bytes(bd, page, reg, &data, 4);
-+}
-+
-+/*
-+ * bcm539x_write_16
-+ * Writes 16 bits of data to the given page and register
-+ */
-+static inline int bcm539x_write_16(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, u16_t data)
-+{
-+ data = cpu_to_le16(data);
-+ return bcm539x_write_bytes(bd, page, reg, &data, 2);
-+}
-+
-+/*
-+ * bcm539x_write_8
-+ * Writes 8 bits of data to the given page and register
-+ */
-+static inline int bcm539x_write_8(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, u8_t data)
-+{
-+ return bcm539x_write_bytes(bd, page, reg, &data, 1);
-+}
-+
-+/*
-+ * bcm539x_read_bytes
-+ * Reads a number of bytes from a given page and register
-+ */
-+static int bcm539x_read_bytes(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, void *buf, u8_t len)
-+{
-+ u8_t txbuf[2];
-+ int ret;
-+
-+ /*
-+ * (1) Make sure the chip has finished processing our previous request
-+ */
-+ ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_SPIF, 0);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * (2) Set the page
-+ */
-+ ret = bcm539x_set_page(bd, page);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * (3) Kick off the register read
-+ */
-+ txbuf[0] = BCM539X_CMD_READ;
-+ txbuf[1] = reg;
-+ ret = spi_write_then_read(bd->spi, txbuf, 2, txbuf, 1);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * (4) Wait for RACK
-+ */
-+ ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_RACK, 1);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * (5) Read the data
-+ */
-+ txbuf[0] = BCM539X_CMD_READ;
-+ txbuf[1] = BCM539X_GLOBAL_SPI_DATA0;
-+
-+ ret = spi_write_then_read(bd->spi, txbuf, 2, buf, len);
-+
-+#ifdef BCM539X_DEBUG
-+ {
-+ int i;
-+ printk("read page %02x reg %02x len=%d rxbuf=",
-+ page, reg, len);
-+ for (i = 0; i < len; i++) {
-+ printk("%02x ", ((u8_t *)buf)[i]);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+
-+ return ret;
-+}
-+
-+/*
-+ * bcm539x_read_32
-+ * Reads an 32 bit number from a given page and register
-+ */
-+static int bcm539x_read_32(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, u32_t *buf)
-+{
-+ int ret = bcm539x_read_bytes(bd, page, reg, buf, 4);
-+ *buf = le32_to_cpu(*buf);
-+ return ret;
-+}
-+
-+/*
-+ * bcm539x_read_16
-+ * Reads an 16 bit number from a given page and register
-+ */
-+static int bcm539x_read_16(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, u16_t *buf)
-+{
-+ int ret = bcm539x_read_bytes(bd, page, reg, buf, 2);
-+ *buf = le16_to_cpu(*buf);
-+ return ret;
-+}
-+
-+/*
-+ * bcm539x_read_8
-+ * Reads an 8 bit number from a given page and register
-+ */
-+static int bcm539x_read_8(struct bcm539x_data *bd, u8_t page,
-+ u8_t reg, u8_t *buf)
-+{
-+ return bcm539x_read_bytes(bd, page, reg, buf, 1);
-+}
-+
-+/*
-+ * bcm539x_set_mode
-+ */
-+static int bcm539x_set_mode(struct bcm539x_data *bd, int state)
-+{
-+ u8_t buf;
-+ int ret;
-+
-+ ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, &buf);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ buf &= ~(1 << 1);
-+ buf |= state ? (1 << 1) : 0;
-+
-+ ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, buf);
-+ return ret;
-+}
-+
-+/*
-+ * bcm539x_handle_reset
-+ */
-+static int bcm539x_handle_reset(struct switch_device *dev, char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int ret;
-+
-+ ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_SRST,
-+ (1 << 7) | (1 << 4));
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ udelay(20);
-+
-+ ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_SRST, 0);
-+ return ret;
-+}
-+
-+/*
-+ * bcm539x_handle_vlan_ports_read
-+ */
-+static int bcm539x_handle_vlan_ports_read(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int j;
-+ int len = 0;
-+ u8_t rxbuf8;
-+ u32_t rxbuf32;
-+ int ret;
-+
-+ ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, inst);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
-+ (1 << 7) | 1);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Wait for completion
-+ */
-+ for (j = 0; j < BCM539X_SPI_RETRIES; j++) {
-+ ret = bcm539x_read_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
-+ &rxbuf8);
-+ if (ret) {
-+ return ret;
-+ }
-+ if (!(rxbuf8 & (1 << 7))) {
-+ break;
-+ }
-+ }
-+
-+ if (j == BCM539X_SPI_RETRIES) {
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Read the table entry
-+ */
-+ ret = bcm539x_read_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, &rxbuf32);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ for (j = 0; j < 9; j++) {
-+ if (rxbuf32 & (1 << j)) {
-+ u16_t rxbuf16;
-+ len += sprintf(buf + len, "%d", j);
-+ if (rxbuf32 & (1 << (j + 9))) {
-+ buf[len++] = 'u';
-+ } else {
-+ buf[len++] = 't';
-+ }
-+ ret = bcm539x_read_16(bd, PAGE_VLAN,
-+ REG_VLAN_PTAG0 + (j << 1),
-+ &rxbuf16);
-+ if (ret) {
-+ return ret;
-+ }
-+ if (rxbuf16 == inst) {
-+ buf[len++] = '*';
-+ }
-+ buf[len++] = '\t';
-+ }
-+ }
-+
-+ len += sprintf(buf + len, "\n");
-+ buf[len] = '\0';
-+
-+ return len;
-+}
-+
-+/*
-+ * bcm539x_handle_vlan_ports_write
-+ */
-+static int bcm539x_handle_vlan_ports_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int j;
-+ u32_t untag;
-+ u32_t ports;
-+ u32_t def;
-+
-+ u8_t rxbuf8;
-+ u16_t rxbuf16;
-+ int ret;
-+
-+ switch_parse_vlan_ports(dev, buf, &untag, &ports, &def);
-+
-+#ifdef BCM539X_DEBUG
-+ printk(KERN_DEBUG "'%s' inst=%d untag=%08x ports=%08x def=%08x\n",
-+ buf, inst, untag, ports, def);
-+#endif
-+
-+ if (!ports) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Change default vlan tag
-+ */
-+ for (j = 0; j < 9; j++) {
-+ if ((untag | def) & (1 << j)) {
-+ ret = bcm539x_write_16(bd, PAGE_VLAN,
-+ REG_VLAN_PTAG0 + (j << 1),
-+ inst);
-+ if (ret) {
-+ return ret;
-+ }
-+ continue;
-+ }
-+
-+ if (!(dev->port_mask[0] & (1 << j))) {
-+ continue;
-+ }
-+
-+ /*
-+ * Remove any ports which are not listed anymore as members of
-+ * this vlan
-+ */
-+ ret = bcm539x_read_16(bd, PAGE_VLAN,
-+ REG_VLAN_PTAG0 + (j << 1), &rxbuf16);
-+ if (ret) {
-+ return ret;
-+ }
-+ if (rxbuf16 == inst) {
-+ ret = bcm539x_write_16(bd, PAGE_VLAN,
-+ REG_VLAN_PTAG0 + (j << 1), 0);
-+ if (ret) {
-+ return ret;
-+ }
-+ }
-+ }
-+
-+ /*
-+ * Write the VLAN table
-+ */
-+ ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, inst);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ ret = bcm539x_write_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395,
-+ (untag << 9) | ports);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
-+ (1 << 7) | 0);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Wait for completion
-+ */
-+ for (j = 0; j < BCM539X_SPI_RETRIES; j++) {
-+ ret = bcm539x_read_bytes(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
-+ &rxbuf8, 1);
-+ if (ret) {
-+ return ret;
-+ }
-+ if (!(rxbuf8 & (1 << 7))) {
-+ break;
-+ }
-+ }
-+
-+ return (j < BCM539X_SPI_RETRIES) ? 0 : -EIO;
-+}
-+
-+/*
-+ * Handlers for <this_driver>/vlan/<vlan_id>
-+ */
-+static const struct switch_handler bcm539x_switch_handlers_vlan_dir[] = {
-+ {
-+ .name = "ports",
-+ .read = bcm539x_handle_vlan_ports_read,
-+ .write = bcm539x_handle_vlan_ports_write,
-+ },
-+ {
-+ },
-+};
-+
-+/*
-+ * bcm539x_handle_vlan_delete_write
-+ */
-+static int bcm539x_handle_vlan_delete_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int vid;
-+ u8_t rxbuf8;
-+ u32_t txbuf;
-+ int j;
-+ int ret;
-+
-+ vid = simple_strtoul(buf, NULL, 0);
-+ if (!vid) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Disable this VLAN
-+ *
-+ * Go through the port-based vlan registers and clear the appropriate
-+ * ones out
-+ */
-+ for (j = 0; j < 9; j++) {
-+ u16_t rxbuf16;
-+ ret = bcm539x_read_16(bd, PAGE_VLAN, REG_VLAN_PTAG0 + (j << 1),
-+ &rxbuf16);
-+ if (ret) {
-+ return ret;
-+ }
-+ if (rxbuf16 == vid) {
-+ txbuf = 0;
-+ ret = bcm539x_write_16(bd, PAGE_VLAN,
-+ REG_VLAN_PTAG0 + (j << 1),
-+ txbuf);
-+ if (ret) {
-+ return ret;
-+ }
-+ }
-+ }
-+
-+ /*
-+ * Write the VLAN table
-+ */
-+ txbuf = vid;
-+ ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, txbuf);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ txbuf = 0;
-+ ret = bcm539x_write_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, txbuf);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ txbuf = (1 << 7) | (0);
-+ ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, txbuf);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Wait for completion
-+ */
-+ for (j = 0; j < BCM539X_SPI_RETRIES; j++) {
-+ ret = bcm539x_read_bytes(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395,
-+ &rxbuf8, 1);
-+ if (ret) {
-+ return ret;
-+ }
-+ if (!(rxbuf8 & (1 << 7))) {
-+ break;
-+ }
-+ }
-+
-+ if (j == BCM539X_SPI_RETRIES) {
-+ return -EIO;
-+ }
-+
-+ return switch_remove_vlan_dir(dev, vid);
-+}
-+
-+/*
-+ * bcm539x_handle_vlan_create_write
-+ */
-+static int bcm539x_handle_vlan_create_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ int vid;
-+
-+ vid = simple_strtoul(buf, NULL, 0);
-+ if (!vid) {
-+ return -EINVAL;
-+ }
-+
-+ return switch_create_vlan_dir(dev, vid,
-+ bcm539x_switch_handlers_vlan_dir);
-+}
-+
-+/*
-+ * bcm539x_handle_enable_read
-+ */
-+static int bcm539x_handle_enable_read(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ u8_t rxbuf;
-+ int ret;
-+
-+ ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, &rxbuf);
-+ if (ret) {
-+ return ret;
-+ }
-+ rxbuf = (rxbuf & (1 << 1)) ? 1 : 0;
-+
-+ return sprintf(buf, "%d\n", rxbuf);
-+}
-+
-+/*
-+ * bcm539x_handle_enable_write
-+ */
-+static int bcm539x_handle_enable_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+
-+ return bcm539x_set_mode(bd, buf[0] == '1');
-+}
-+
-+/*
-+ * bcm539x_handle_enable_vlan_read
-+ */
-+static int bcm539x_handle_enable_vlan_read(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ u8_t rxbuf;
-+ int ret;
-+
-+ ret = bcm539x_read_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, &rxbuf);
-+ if (ret) {
-+ return ret;
-+ }
-+ rxbuf = (rxbuf & (1 << 7)) ? 1 : 0;
-+
-+ return sprintf(buf, "%d\n", rxbuf);
-+}
-+
-+/*
-+ * bcm539x_handle_enable_vlan_write
-+ */
-+static int bcm539x_handle_enable_vlan_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int ret;
-+
-+ /*
-+ * disable 802.1Q VLANs
-+ */
-+ if (buf[0] != '1') {
-+ ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, 0);
-+ return ret;
-+ }
-+
-+ /*
-+ * enable 802.1Q VLANs
-+ *
-+ * Enable 802.1Q | IVL learning
-+ */
-+ ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL0,
-+ (1 << 7) | (3 << 5));
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * RSV multicast fwd | RSV multicast chk
-+ */
-+ ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL1,
-+ (1 << 2) | (1 << 3));
-+ if (ret) {
-+ return ret;
-+ }
-+#if 0
-+ /*
-+ * Drop invalid VID
-+ */
-+ ret = bcm539x_write_16(bd, PAGE_VLAN, REG_VLAN_CTRL3, 0x00FF);
-+ if (ret) {
-+ return ret;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+/*
-+ * bcm539x_handle_port_enable_read
-+ */
-+static int bcm539x_handle_port_enable_read(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ return sprintf(buf, "%d\n", 1);
-+}
-+
-+/*
-+ * bcm539x_handle_port_enable_write
-+ */
-+static int bcm539x_handle_port_enable_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ /*
-+ * validate port
-+ */
-+ if (!(dev->port_mask[0] & (1 << inst))) {
-+ return -EIO;
-+ }
-+
-+ if (buf[0] != '1') {
-+ printk(KERN_WARNING "switch port[%d] disabling is not supported\n", inst);
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * bcm539x_handle_port_state_read
-+ */
-+static int bcm539x_handle_port_state_read(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int ret;
-+ u16_t link;
-+
-+ /*
-+ * validate port
-+ */
-+ if (!(dev->port_mask[0] & (1 << inst))) {
-+ return -EIO;
-+ }
-+
-+ /*
-+ * check PHY link state - CPU port (port 8) is always up
-+ */
-+ ret = bcm539x_read_16(bd, PAGE_STATUS, REG_LINK_STATUS, &link);
-+ if (ret) {
-+ return ret;
-+ }
-+ link |= (1 << 8);
-+
-+ return sprintf(buf, "%d\n", (link & (1 << inst)) ? 1 : 0);
-+}
-+
-+/*
-+ * bcm539x_handle_port_media_read
-+ */
-+static int bcm539x_handle_port_media_read(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int ret;
-+ u16_t link, duplex;
-+ u32_t speed;
-+
-+ /*
-+ * validate port
-+ */
-+ if (!(dev->port_mask[0] & (1 << inst))) {
-+ return -EIO;
-+ }
-+
-+ /*
-+ * check PHY link state first - CPU port (port 8) is always up
-+ */
-+ ret = bcm539x_read_16(bd, PAGE_STATUS, REG_LINK_STATUS, &link);
-+ if (ret) {
-+ return ret;
-+ }
-+ link |= (1 << 8);
-+
-+ if (!(link & (1 << inst))) {
-+ return sprintf(buf, "UNKNOWN\n");
-+ }
-+
-+ /*
-+ * get link speeda dn duplex - CPU port (port 8) is 1000/full
-+ */
-+ ret = bcm539x_read_32(bd, PAGE_STATUS, 4, &speed);
-+ if (ret) {
-+ return ret;
-+ }
-+ speed |= (2 << 16);
-+ speed = (speed >> (2 * inst)) & 3;
-+
-+ ret = bcm539x_read_16(bd, PAGE_STATUS, 8, &duplex);
-+ if (ret) {
-+ return ret;
-+ }
-+ duplex |= (1 << 8);
-+ duplex = (duplex >> inst) & 1;
-+
-+ return sprintf(buf, "%d%cD\n",
-+ (speed == 0) ? 10 : ((speed == 1) ? 100 : 1000),
-+ duplex ? 'F' : 'H');
-+}
-+
-+/*
-+ * bcm539x_handle_port_meida_write
-+ */
-+static int bcm539x_handle_port_meida_write(struct switch_device *dev,
-+ char *buf, int inst)
-+{
-+ struct bcm539x_data *bd =
-+ (struct bcm539x_data *)switch_get_drvdata(dev);
-+ int ret;
-+ u16_t ctrl_word, local_cap, local_giga_cap;
-+
-+ /*
-+ * validate port (not for CPU port)
-+ */
-+ if (!(dev->port_mask[0] & (1 << inst) & ~(1 << 8))) {
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Get the maximum capability from status
-+ * SPI reg[0x00] = PHY[0x0] --- MII control
-+ * SPI reg[0x08] = PHY[0x4] --- MII local capability
-+ * SPI reg[0x12] = PHY[0x9] --- GMII control
-+ */
-+ ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_ADVERTISE << 1), &local_cap);
-+ if (ret) {
-+ return ret;
-+ }
-+ ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_CTRL1000 << 1), &local_giga_cap);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /* Configure to the requested speed */
-+ if (strncmp(buf, "1000FD", 6) == 0) {
-+ /* speed */
-+ local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ local_giga_cap |= (ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ /* duplex */
-+ } else if (strncmp(buf, "100FD", 5) == 0) {
-+ /* speed */
-+ local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ /* duplex */
-+ local_cap &= ~(ADVERTISE_100HALF);
-+ } else if (strncmp(buf, "100HD", 5) == 0) {
-+ /* speed */
-+ local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ /* duplex */
-+ local_cap &= ~(ADVERTISE_100FULL);
-+ } else if (strncmp(buf, "10FD", 4) == 0) {
-+ /* speed */
-+ local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ /* duplex */
-+ local_cap &= ~(ADVERTISE_10HALF);
-+ } else if (strncmp(buf, "10HD", 4) == 0) {
-+ /* speed */
-+ local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ /* duplex */
-+ local_cap &= ~(ADVERTISE_10FULL);
-+ } else if (strncmp(buf, "AUTO", 4) == 0) {
-+ /* speed */
-+ local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ local_giga_cap |= (ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ } else {
-+ return -EINVAL;
-+ }
-+
-+ /* Active PHY with the requested speed for auto-negotiation */
-+ ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_ADVERTISE << 1), local_cap);
-+ if (ret) {
-+ return ret;
-+ }
-+ ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_CTRL1000 << 1), local_giga_cap);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_BMCR << 1), &ctrl_word);
-+ if (ret) {
-+ return ret;
-+ }
-+ ctrl_word |= (BMCR_ANENABLE | BMCR_ANRESTART);
-+ ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_BMCR << 1), ctrl_word);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * proc_fs entries for this switch
-+ */
-+static const struct switch_handler bcm539x_switch_handlers[] = {
-+ {
-+ .name = "enable",
-+ .read = bcm539x_handle_enable_read,
-+ .write = bcm539x_handle_enable_write,
-+ },
-+ {
-+ .name = "enable_vlan",
-+ .read = bcm539x_handle_enable_vlan_read,
-+ .write = bcm539x_handle_enable_vlan_write,
-+ },
-+ {
-+ .name = "reset",
-+ .write = bcm539x_handle_reset,
-+ },
-+ {
-+ },
-+};
-+
-+/*
-+ * Handlers for <this_driver>/vlan
-+ */
-+static const struct switch_handler bcm539x_switch_handlers_vlan[] = {
-+ {
-+ .name = "delete",
-+ .write = bcm539x_handle_vlan_delete_write,
-+ },
-+ {
-+ .name = "create",
-+ .write = bcm539x_handle_vlan_create_write,
-+ },
-+ {
-+ },
-+};
-+
-+/*
-+ * Handlers for <this_driver>/port/<port number>
-+ */
-+static const struct switch_handler bcm539x_switch_handlers_port[] = {
-+ {
-+ .name = "enable",
-+ .read = bcm539x_handle_port_enable_read,
-+ .write = bcm539x_handle_port_enable_write,
-+ },
-+ {
-+ .name = "state",
-+ .read = bcm539x_handle_port_state_read,
-+ },
-+ {
-+ .name = "media",
-+ .read = bcm539x_handle_port_media_read,
-+ .write = bcm539x_handle_port_meida_write,
-+ },
-+ {
-+ },
-+};
-+
-+/*
-+ * bcm539x_probe
-+ */
-+static int __devinit bcm539x_probe(struct spi_device *spi)
-+{
-+ struct bcm539x_data *bd;
-+ struct switch_core_platform_data *pdata;
-+ struct switch_device *switch_dev = NULL;
-+ int i, ret;
-+ u8_t txbuf[2];
-+
-+ pdata = spi->dev.platform_data;
-+ if (!pdata) {
-+ return -EINVAL;
-+ }
-+
-+ ret = spi_setup(spi);
-+ if (ret < 0) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Reset the chip if requested
-+ */
-+ if (pdata->flags & SWITCH_DEV_FLAG_HW_RESET) {
-+ ret = gpio_request(pdata->pin_reset, "switch-bcm539x-reset");
-+ if (ret) {
-+ printk(KERN_WARNING "Could not request reset\n");
-+ return -EINVAL;
-+ }
-+
-+ gpio_direction_output(pdata->pin_reset, 0);
-+ udelay(10);
-+ gpio_set_value(pdata->pin_reset, 1);
-+ udelay(20);
-+ }
-+
-+ /*
-+ * Allocate our private data structure
-+ */
-+ bd = kzalloc(sizeof(struct bcm539x_data), GFP_KERNEL);
-+ if (!bd) {
-+ return -ENOMEM;
-+ }
-+
-+ dev_set_drvdata(&spi->dev, bd);
-+ bd->pdata = pdata;
-+ bd->spi = spi;
-+ bd->last_page = 0xFF;
-+
-+ /*
-+ * First perform SW reset if needed
-+ */
-+ if (pdata->flags & SWITCH_DEV_FLAG_SW_RESET) {
-+ txbuf[0] = (1 << 7) | (1 << 4);
-+ ret = bcm539x_write_bytes(bd, PAGE_PORT_TC,
-+ REG_CTRL_SRST, txbuf, 1);
-+ if (ret) {
-+ goto fail;
-+ }
-+
-+ udelay(20);
-+
-+ txbuf[0] = 0;
-+ ret = bcm539x_write_bytes(bd, PAGE_PORT_TC,
-+ REG_CTRL_SRST, txbuf, 1);
-+ if (ret) {
-+ goto fail;
-+ }
-+ }
-+
-+ /*
-+ * See if we can see the chip
-+ */
-+ for (i = 0; i < 10; i++) {
-+ ret = bcm539x_read_bytes(bd, PAGE_MMR, REG_DEVICE_ID,
-+ &bd->device_id, 1);
-+ if (!ret) {
-+ break;
-+ }
-+ }
-+ if (ret) {
-+ goto fail;
-+ }
-+
-+ /*
-+ * We only support 5395, 5397, 5398
-+ */
-+ if ((bd->device_id != 0x95) && (bd->device_id != 0x97) &&
-+ (bd->device_id != 0x98)) {
-+ ret = -ENODEV;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Override CPU port config: fixed link @1000 with flow control
-+ */
-+ ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MIIPO, txbuf);
-+ bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_MIIPO, 0xbb); // Override IMP port config
-+ printk("Broadcom SW CPU port setting: 0x%x -> 0xbb\n", txbuf[0]);
-+
-+ /*
-+ * Setup the switch driver structure
-+ */
-+ switch_dev = switch_alloc();
-+ if (!switch_dev) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+ switch_dev->name = pdata->name;
-+
-+ switch_dev->ports = (bd->device_id == 0x98) ? 9 : 6;
-+ switch_dev->port_mask[0] = (bd->device_id == 0x98) ? 0x1FF : 0x11F;
-+ switch_dev->driver_handlers = bcm539x_switch_handlers;
-+ switch_dev->reg_handlers = NULL;
-+ switch_dev->vlan_handlers = bcm539x_switch_handlers_vlan;
-+ switch_dev->port_handlers = bcm539x_switch_handlers_port;
-+
-+ bd->switch_dev = switch_dev;
-+ switch_set_drvdata(switch_dev, (void *)bd);
-+
-+ ret = switch_register(bd->switch_dev);
-+ if (ret < 0) {
-+ goto fail;
-+ }
-+
-+ printk(KERN_INFO "bcm53%02x switch chip initialized\n", bd->device_id);
-+
-+ return ret;
-+
-+fail:
-+ if (switch_dev) {
-+ switch_release(switch_dev);
-+ }
-+ dev_set_drvdata(&spi->dev, NULL);
-+ kfree(bd);
-+ return ret;
-+}
-+
-+static int __attribute__((unused)) bcm539x_remove(struct spi_device *spi)
-+{
-+ struct bcm539x_data *bd;
-+
-+ bd = dev_get_drvdata(&spi->dev);
-+
-+ if (bd->pdata->flags & SWITCH_DEV_FLAG_HW_RESET) {
-+ gpio_free(bd->pdata->pin_reset);
-+ }
-+
-+ if (bd->switch_dev) {
-+ switch_unregister(bd->switch_dev);
-+ switch_release(bd->switch_dev);
-+ }
-+
-+ dev_set_drvdata(&spi->dev, NULL);
-+
-+ kfree(bd);
-+
-+ return 0;
-+}
-+
-+static struct spi_driver bcm539x_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = bcm539x_probe,
-+ .remove = __devexit_p(bcm539x_remove),
-+};
-+
-+static int __init bcm539x_init(void)
-+{
-+ return spi_register_driver(&bcm539x_driver);
-+}
-+
-+module_init(bcm539x_init);
-+
-+static void __exit bcm539x_exit(void)
-+{
-+ spi_unregister_driver(&bcm539x_driver);
-+}
-+module_exit(bcm539x_exit);
-+
-+MODULE_AUTHOR("Pat Tjin");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("bcm539x SPI switch chip driver");
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/switch-bcm539x-reg.h linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-bcm539x-reg.h
---- linux-2.6.30.10/arch/ubicom32/mach-common/switch-bcm539x-reg.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-bcm539x-reg.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,221 @@
-+/*
-+ * arch/ubicom32/mach-common/switch-bcm539x-reg.h
-+ * Broadcom switch definitions for Ubicom32 architecture.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+/*
-+ * Broadcom 53xx RoboSwitch device driver.
-+ *
-+ * Copyright 2007, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _SWITCH_BCM539X_REG_H_
-+#define _SWITCH_BCM539X_REG_H_
-+
-+#define BCM539X_CMD_READ 0x60
-+#define BCM539X_CMD_WRITE 0x61
-+
-+#define BCM539X_GLOBAL_SPI_DATA0 0xf0
-+
-+#define BCM539X_GLOBAL_SPI_STATUS 0xfe
-+#define BCM539X_GLOBAL_SPI_ST_SPIF (1<<7)
-+#define BCM539X_GLOBAL_SPI_ST_RACK (1<<5)
-+
-+#define BCM539X_GLOBAL_PAGE 0xff
-+
-+#define PAGE_PORT_TC 0x00 // Port Traffic Control Register
-+
-+#define PAGE_QOS_CTL 0x30 // QoS Global Control Register
-+#define PAGE_QOS_TAG 0x34 // Default IEEE 802.1Q TAG Register
-+
-+#define PAGE_MII_CTL_PORT0 0x10 // Internal PHY MII Register
-+#define PAGE_MII_CTL_PORT1 0x11
-+#define PAGE_MII_CTL_PORT2 0x12
-+#define PAGE_MII_CTL_PORT3 0x13
-+#define PAGE_MII_CTL_PORT4 0x14
-+
-+#define PAGE_STATUS 0x01 // Status Register Page
-+#define PAGE_RATE_CONTROL 0x41 // Broadcast Storm Suppression Register
-+
-+#define REG_GRATE_CONTROL 0x00
-+
-+#define REG_LED_POWER 0x12
-+
-+// Ingress Rate Control
-+#define REG_IRATE_CONTROLP0 0x10
-+#define REG_IRATE_CONTROLP1 0x14
-+#define REG_IRATE_CONTROLP2 0x18
-+#define REG_IRATE_CONTROLP3 0x1C
-+#define REG_IRATE_CONTROLP4 0x20
-+#define REG_IRATE_CONTROLP7 0x2C
-+#define REG_IRATE_CONTROLPI 0x30
-+
-+// Egress Rate Control
-+#define REG_ERATE_CONTROLP0 0x80
-+#define REG_ERATE_CONTROLP1 0x82
-+#define REG_ERATE_CONTROLP2 0x84
-+#define REG_ERATE_CONTROLP3 0x86
-+#define REG_ERATE_CONTROLP4 0x88
-+#define REG_ERATE_CONTROLP5 0x8A
-+#define REG_ERATE_CONTROLP6 0x8C
-+#define REG_ERATE_CONTROLP7 0x8E
-+#define REG_ERATE_CONTROLPI 0x90
-+
-+#define REG_LINK_STATUS 0x00
-+
-+#define REG_TC_PORT0 0x00
-+#define REG_TC_PORT1 0x01
-+#define REG_TC_PORT2 0x02
-+#define REG_TC_PORT3 0x03
-+#define REG_TC_PORT4 0x04
-+#define REG_TC_PORT5 0x05
-+
-+#define REG_SPEED_CTL 0x00
-+#define REG_SPEED_ADV100 0x08
-+#define REG_SPEED_ADV1000 0x12
-+
-+#define REG_QOS_EN 0x00
-+#define REG_QOS_TAG_PORT1 0x12 // Default IEEE 802.1Q TAG, PORT 1
-+#define REG_QOS_TAG_PORT2 0x14 // Default IEEE 802.1Q TAG, PORT 2
-+#define REG_QOS_TAG_PORT3 0x16 // Default IEEE 802.1Q TAG, PORT 3
-+#define REG_QOS_TAG_PORT4 0x18 // Default IEEE 802.1Q TAG, PORT 4
-+#define REG_QOS_PID_PORT1 0x52 // Ingress Port Priority ID MAP, PORT 1
-+#define REG_QOS_PID_PORT2 0x54 // Ingress Port Priority ID MAP, PORT 2
-+#define REG_QOS_PID_PORT3 0x56 // Ingress Port Priority ID MAP, PORT 3
-+#define REG_QOS_PID_PORT4 0x58 // Ingress Port Priority ID MAP, PORT 4
-+#define REG_QOS_TXQ_CTL 0x80 // Tx Queue Control Register
-+#define REG_QOS_TXQ_WHTQ0 0x81 // Tx Queue Weight Register Queue 0
-+#define REG_QOS_TXQ_WHTQ1 0x82 // Tx Queue Weight Register Queue 1
-+#define REG_QOS_TXQ_WHTQ2 0x83 // Tx Queue Weight Register Queue 2
-+#define REG_QOS_TXQ_WHTQ3 0x84 // Tx Queue Weight Register Queue 3
-+
-+#define REG_CTRL_PPSEL 0x24 /* 5397: Protected port select register */
-+
-+#define RATE_CONTROL_ENABLED (1 << 22)
-+#define RATE_CONTROL_BSIZE ((1 << 10) | (1 << 9) | (1 << 8))
-+
-+#define RATE_CONTROL_HIGH ((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4))
-+#define RATE_CONTROL_HIGH_N ~((1 << 3) | (1 << 2) | (1 << 1) | (1 << 0))
-+
-+#define RATE_CONTROL_MEDIUM ((1 << 6) | (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0))
-+#define RATE_CONTROL_MEDIUM_N ~((1 << 7))
-+
-+#define RATE_CONTROL_NORMAL ((1 << 5) | (1 << 2) | (1 << 0))
-+#define RATE_CONTROL_NORMAL_N ~((1 << 7) | (1 << 6) | (1 << 4) | (1 << 3) | (1 << 1))
-+
-+#define RATE_CONTROL_LOW ((1 << 4) | (1 << 3) | (1 << 0))
-+#define RATE_CONTROL_LOW_N ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2) | (1 << 1))
-+
-+// --- Gemtek, Configure the switch to support Ethernet Port QoS
-+
-+/* MII access registers */
-+#define PSEUDO_PHYAD 0x1E /* MII Pseudo PHY address */
-+#define REG_MII_PAGE 0x10 /* MII Page register */
-+#define REG_MII_ADDR 0x11 /* MII Address register */
-+#define REG_MII_DATA0 0x18 /* MII Data register 0 */
-+#define REG_MII_DATA1 0x19 /* MII Data register 1 */
-+#define REG_MII_DATA2 0x1a /* MII Data register 2 */
-+#define REG_MII_DATA3 0x1b /* MII Data register 3 */
-+
-+/* Page numbers */
-+#define PAGE_CTRL 0x00 /* Control page */
-+#define PAGE_MMR 0x02 /* 5397 Management/Mirroring page */
-+#define PAGE_VTBL 0x05 /* ARL/VLAN Table access page */
-+#define PAGE_VLAN 0x34 /* VLAN page */
-+
-+/* Control page registers */
-+#define REG_CTRL_PORT0 0x00 /* Port 0 traffic control register */
-+#define REG_CTRL_PORT1 0x01 /* Port 1 traffic control register */
-+#define REG_CTRL_PORT2 0x02 /* Port 2 traffic control register */
-+#define REG_CTRL_PORT3 0x03 /* Port 3 traffic control register */
-+#define REG_CTRL_PORT4 0x04 /* Port 4 traffic control register */
-+#define REG_CTRL_PORT5 0x05 /* Port 5 traffic control register */
-+#define REG_CTRL_PORT6 0x06 /* Port 6 traffic control register */
-+#define REG_CTRL_PORT7 0x07 /* Port 7 traffic control register */
-+#define REG_CTRL_MODE 0x0B /* Switch Mode register */
-+#define REG_CTRL_MIIPO 0x0E /* 5325: MII Port Override register */
-+#define REG_CTRL_SRST 0x79 /* Software reset control register */
-+
-+#define REG_DEVICE_ID 0x30 /* 539x Device id: */
-+#define DEVID5395 0x95 /* 5395 */
-+#define DEVID5397 0x97 /* 5397 */
-+#define DEVID5398 0x98 /* 5398 */
-+#define REG_REVISION_ID 0x40 /* 539x Revision id: */
-+
-+/* VLAN page registers */
-+#define REG_VLAN_CTRL0 0x00 /* VLAN Control 0 register */
-+#define REG_VLAN_CTRL1 0x01 /* VLAN Control 1 register */
-+#define REG_VLAN_CTRL2 0x02 /* VLAN Control 2 register */
-+#define REG_VLAN_CTRL3 0x03 /* VLAN Control 3 register */
-+#define REG_VLAN_CTRL4 0x04 /* VLAN Control 4 register */
-+#define REG_VLAN_CTRL5 0x05 /* VLAN Control 5 register */
-+#define REG_VLAN_ACCESS 0x06 /* VLAN Table Access register */
-+#define REG_VLAN_WRITE 0x08 /* VLAN Write register */
-+#define REG_VLAN_READ 0x0C /* VLAN Read register */
-+#define REG_VLAN_PTAG0 0x10 /* VLAN Default Port Tag register - port 0 */
-+#define REG_VLAN_PTAG1 0x12 /* VLAN Default Port Tag register - port 1 */
-+#define REG_VLAN_PTAG2 0x14 /* VLAN Default Port Tag register - port 2 */
-+#define REG_VLAN_PTAG3 0x16 /* VLAN Default Port Tag register - port 3 */
-+#define REG_VLAN_PTAG4 0x18 /* VLAN Default Port Tag register - port 4 */
-+#define REG_VLAN_PTAG5 0x1a /* VLAN Default Port Tag register - port 5 */
-+#define REG_VLAN_PTAG6 0x1c /* VLAN Default Port Tag register - port 6 */
-+#define REG_VLAN_PTAG7 0x1e /* VLAN Default Port Tag register - port 7 */
-+#define REG_VLAN_PTAG8 0x20 /* 539x: VLAN Default Port Tag register - IMP port */
-+#define REG_VLAN_PMAP 0x20 /* 5325: VLAN Priority Re-map register */
-+
-+/* ARL/VLAN Table Access page registers */
-+#define REG_VTBL_CTRL 0x00 /* ARL Read/Write Control */
-+#define REG_VTBL_MINDX 0x02 /* MAC Address Index */
-+#define REG_VTBL_VINDX 0x08 /* VID Table Index */
-+#define REG_VTBL_ARL_E0 0x10 /* ARL Entry 0 */
-+#define REG_VTBL_ARL_E1 0x18 /* ARL Entry 1 */
-+#define REG_VTBL_DAT_E0 0x18 /* ARL Table Data Entry 0 */
-+#define REG_VTBL_SCTRL 0x20 /* ARL Search Control */
-+#define REG_VTBL_SADDR 0x22 /* ARL Search Address */
-+#define REG_VTBL_SRES 0x24 /* ARL Search Result */
-+#define REG_VTBL_SREXT 0x2c /* ARL Search Result */
-+#define REG_VTBL_VID_E0 0x30 /* VID Entry 0 */
-+#define REG_VTBL_VID_E1 0x32 /* VID Entry 1 */
-+#define REG_VTBL_PREG 0xFF /* Page Register */
-+#define REG_VTBL_ACCESS 0x60 /* VLAN table access register */
-+#define REG_VTBL_INDX 0x61 /* VLAN table address index register */
-+#define REG_VTBL_ENTRY 0x63 /* VLAN table entry register */
-+#define REG_VTBL_ACCESS_5395 0x80 /* VLAN table access register */
-+#define REG_VTBL_INDX_5395 0x81 /* VLAN table address index register */
-+#define REG_VTBL_ENTRY_5395 0x83 /* VLAN table entry register */
-+
-+/* SPI registers */
-+#define REG_SPI_PAGE 0xff /* SPI Page register */
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/switch-core.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-core.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/switch-core.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-core.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,737 @@
-+/*
-+ * arch/ubicom32/mach-common/switch-core.c
-+ * Ubicom32 architecture switch and /proc/switch/... implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ * Basic doc of driver's /proc interface:
-+ * /proc/switch/<interface>/
-+ * registers: read-only
-+ * counters: read-only
-+ * reset: write causes hardware reset
-+ * enable: "0", "1"
-+ * enable_vlan: "0", "1"
-+ * port/<port-number>/
-+ * enabled: "0", "1"
-+ * link state: read-only
-+ * media: "AUTO", "1000FD", "100FD", "100HD", "10FD", "10HD"
-+ * vlan/<port-number>/
-+ * ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*")
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/uaccess.h>
-+#include <linux/ctype.h>
-+#include <linux/proc_fs.h>
-+#include <linux/list.h>
-+#include <linux/rwsem.h>
-+#include <linux/device.h>
-+
-+#include "switch-core.h"
-+
-+/*
-+ * Pointer to the root of our filesystem
-+ */
-+static struct proc_dir_entry *switch_root;
-+
-+/*
-+ * Lock used to manage access to the switch list
-+ */
-+DECLARE_RWSEM(switch_list_lock);
-+EXPORT_SYMBOL_GPL(switch_list_lock);
-+
-+/*
-+ * List of switches we are managing
-+ */
-+LIST_HEAD(switch_list);
-+EXPORT_SYMBOL_GPL(switch_list);
-+
-+/*
-+ * List of handlers we have
-+ */
-+LIST_HEAD(switch_handler_list);
-+EXPORT_SYMBOL_GPL(switch_handler_list);
-+
-+/*
-+ * Keep track of all the handlers we added
-+ */
-+struct switch_handler_entry {
-+ struct list_head node;
-+ struct proc_dir_entry *parent;
-+ struct switch_device *dev;
-+ const struct switch_handler *handler;
-+ int inst;
-+};
-+
-+/*
-+ * Keep track of all VLAN dirs we created
-+ */
-+struct switch_vlan_entry {
-+ struct list_head node;
-+ struct proc_dir_entry *pde;
-+ int vlan_id;
-+ const struct switch_handler *handlers;
-+};
-+
-+/*
-+ * switch_parse_vlan_ports
-+ * Parse the vlan properties written to <driver>/vlan/<vlan_id>/ports
-+ */
-+void switch_parse_vlan_ports(struct switch_device *switch_dev,
-+ char *buf, u32_t *untag,
-+ u32_t *ports, u32_t *def)
-+{
-+ u32_t tag = 0;
-+ *untag = 0;
-+ *ports = 0;
-+ *def = 0;
-+
-+
-+ /*
-+ * Skip any leading spaces
-+ */
-+ while (isspace(*buf)) {
-+ buf++;
-+ }
-+
-+ /*
-+ * Parse out the string
-+ */
-+ while (*buf) {
-+ u32_t port = simple_strtoul(buf, &buf, 10);
-+ u32_t mask = (1 << port);
-+
-+ /*
-+ * Parse out any flags
-+ */
-+ while (*buf && !isspace(*buf)) {
-+ switch (*buf++) {
-+ case 't':
-+ tag |= mask;
-+ break;
-+ case '*':
-+ *def |= mask;
-+ break;
-+ }
-+ }
-+ *ports |= mask;
-+
-+ /*
-+ * Skip any spaces
-+ */
-+ while (isspace(*buf)) {
-+ buf++;
-+ }
-+ }
-+
-+ *untag = ~tag & *ports;
-+}
-+
-+/*
-+ * switch_proc_read
-+ * Handle reads from the procfs, dispatches the driver specific handler
-+ */
-+static ssize_t switch_proc_read(struct file *file, char *buf, size_t count,
-+ loff_t *ppos)
-+{
-+ struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
-+ char *page;
-+ int len = 0;
-+
-+ page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL);
-+ if (!page) {
-+ return -ENOBUFS;
-+ }
-+
-+ if (pde->data != NULL) {
-+ struct switch_handler_entry *she =
-+ (struct switch_handler_entry *)pde->data;
-+ if (she->handler->read) {
-+ len += she->handler->read(she->dev, page + len,
-+ she->inst);
-+ }
-+ }
-+ len += 1;
-+
-+ if (*ppos < len) {
-+ len = min_t(int, len - *ppos, count);
-+ if (copy_to_user(buf, (page + *ppos), len)) {
-+ kfree(page);
-+ return -EFAULT;
-+ }
-+ *ppos += len;
-+ } else {
-+ len = 0;
-+ }
-+
-+ kfree(page);
-+
-+ return len;
-+}
-+
-+/*
-+ * switch_proc_write
-+ * Handle writes from the procfs, dispatches the driver specific handler
-+ */
-+static ssize_t switch_proc_write(struct file *file, const char *buf,
-+ size_t count, loff_t *data)
-+{
-+ struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
-+ char *page;
-+ int ret = -EINVAL;
-+
-+ page = kmalloc(count + 1, GFP_KERNEL);
-+ if (page == NULL)
-+ return -ENOBUFS;
-+
-+ if (copy_from_user(page, buf, count)) {
-+ kfree(page);
-+ return -EINVAL;
-+ }
-+ page[count] = 0;
-+
-+ if (pde->data != NULL) {
-+ struct switch_handler_entry *she =
-+ (struct switch_handler_entry *)pde->data;
-+ if (she->handler->write) {
-+ ret = she->handler->write(she->dev, page, she->inst);
-+ if (ret >= 0) {
-+ ret = count;
-+ }
-+ }
-+ }
-+
-+ kfree(page);
-+ return ret;
-+}
-+
-+/*
-+ * File operations for the proc_fs, we must cast here since proc_fs' definitions
-+ * differ from file_operations definitions.
-+ */
-+static struct file_operations switch_proc_fops = {
-+ .read = (ssize_t (*) (struct file *, char __user *,
-+ size_t, loff_t *))switch_proc_read,
-+ .write = (ssize_t (*) (struct file *, const char __user *,
-+ size_t, loff_t *))switch_proc_write,
-+};
-+
-+/*
-+ * switch_add_handler
-+ */
-+static int switch_add_handler(struct switch_device *switch_dev,
-+ struct proc_dir_entry *parent,
-+ const struct switch_handler *handler,
-+ int inst)
-+{
-+ struct switch_handler_entry *she;
-+ struct proc_dir_entry *pde;
-+ int mode;
-+
-+ she = (struct switch_handler_entry *)
-+ kzalloc(sizeof(struct switch_handler_entry), GFP_KERNEL);
-+ if (!she) {
-+ return -ENOMEM;
-+ }
-+
-+ INIT_LIST_HEAD(&she->node);
-+ she->parent = parent;
-+ she->dev = switch_dev;
-+ she->inst = inst;
-+ she->handler = handler;
-+ list_add(&she->node, &switch_dev->handlers);
-+
-+ mode = 0;
-+ if (handler->read != NULL) {
-+ mode |= S_IRUSR;
-+ }
-+ if (handler->write != NULL) {
-+ mode |= S_IWUSR;
-+ }
-+
-+ pde = create_proc_entry(handler->name, mode, parent);
-+ if (!pde) {
-+ kfree(she);
-+ printk("Failed to create node '%s' in parent %p\n",
-+ handler->name, parent);
-+ return -ENOMEM;
-+ }
-+ pde->data = (void *)she;
-+ pde->proc_fops = &switch_proc_fops;
-+
-+ return 0;
-+}
-+
-+/*
-+ * switch_add_handlers
-+ */
-+static int switch_add_handlers(struct switch_device *switch_dev,
-+ struct proc_dir_entry *parent,
-+ const struct switch_handler *handlers,
-+ int inst)
-+{
-+ while (handlers->name) {
-+ int ret = switch_add_handler(switch_dev,
-+ parent, handlers, inst);
-+ if (ret) {
-+ return ret;
-+ }
-+ handlers++;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * switch_remove_vlan_dirs
-+ * Removes all vlan directories
-+ *
-+ * Assumes all vlan directories are empty, should be called after
-+ * switch_remove_handlers
-+ */
-+static void switch_remove_vlan_dirs(struct switch_device *switch_dev)
-+{
-+ struct list_head *pos;
-+ struct list_head *tmp;
-+ struct switch_vlan_entry *sve;
-+
-+ list_for_each_safe(pos, tmp, &switch_dev->vlan_dirs) {
-+ sve = list_entry(pos, struct switch_vlan_entry, node);
-+ list_del(pos);
-+ remove_proc_entry(sve->pde->name, switch_dev->vlan_dir);
-+ kfree(sve);
-+ }
-+}
-+
-+/*
-+ * switch_remove_handlers
-+ * Removes all handlers registered to the given switch_device
-+ */
-+static void switch_remove_handlers(struct switch_device *switch_dev)
-+{
-+ struct list_head *pos;
-+ struct list_head *tmp;
-+ struct switch_handler_entry *she;
-+
-+ list_for_each_safe(pos, tmp, &switch_dev->handlers) {
-+ she = list_entry(pos, struct switch_handler_entry, node);
-+ list_del(pos);
-+ remove_proc_entry(she->handler->name, she->parent);
-+ kfree(she);
-+ }
-+}
-+
-+/*
-+ * switch_unregister_proc_nodes
-+ * Unregisters all proc nodes related to switch_dev
-+ */
-+void switch_unregister_proc_nodes(struct switch_device *switch_dev)
-+{
-+ switch_remove_handlers(switch_dev);
-+
-+ if (switch_dev->port_dirs) {
-+ int i;
-+
-+ for (i = 0; i < switch_dev->ports; i++) {
-+ if (switch_dev->port_dirs[i]) {
-+ remove_proc_entry(
-+ switch_dev->port_dirs[i]->name,
-+ switch_dev->port_dir);
-+ }
-+ }
-+ }
-+
-+ if (switch_dev->port_dir) {
-+ remove_proc_entry("port", switch_dev->driver_dir);
-+ switch_dev->port_dir = NULL;
-+ }
-+
-+ if (switch_dev->reg_dir) {
-+ remove_proc_entry("reg", switch_dev->reg_dir);
-+ switch_dev->reg_dir = NULL;
-+ }
-+
-+ if (switch_dev->vlan_dir) {
-+ switch_remove_vlan_dirs(switch_dev);
-+ remove_proc_entry("vlan", switch_dev->driver_dir);
-+ switch_dev->vlan_dir = NULL;
-+ }
-+
-+ if (switch_dev->driver_dir) {
-+ remove_proc_entry(switch_dev->name, switch_root);
-+ switch_dev->driver_dir = NULL;
-+ }
-+}
-+
-+/*
-+ * switch_remove_vlan_dir
-+ * Removes vlan dir in switch/<switch_driver>/vlan/<vlan_id>
-+ */
-+int switch_remove_vlan_dir(struct switch_device *switch_dev, int vlan_id)
-+{
-+ struct list_head *pos;
-+ struct switch_vlan_entry *sve = NULL;
-+
-+ list_for_each(pos, &switch_dev->vlan_dirs) {
-+ struct switch_vlan_entry *tmp =
-+ list_entry(pos, struct switch_vlan_entry, node);
-+ if (tmp->vlan_id == vlan_id) {
-+ sve = tmp;
-+ break;
-+ }
-+ }
-+
-+ if (!sve) {
-+ return -ENOENT;
-+ }
-+
-+ /*
-+ * Remove it from the list
-+ */
-+ list_del(pos);
-+
-+ /*
-+ * Remove the handlers
-+ */
-+ while (sve->handlers->name) {
-+ remove_proc_entry(sve->handlers->name, sve->pde);
-+ sve->handlers++;
-+ }
-+
-+ /*
-+ * Remove the proc entry for the <vlan_id> dir
-+ */
-+ remove_proc_entry(sve->pde->name, switch_dev->vlan_dir);
-+
-+ kfree(sve);
-+
-+ return 0;
-+}
-+
-+/*
-+ * switch_create_vlan_dir
-+ * Creates vlan dir in switch/<switch_driver>/vlan/<vlan_id>
-+ */
-+int switch_create_vlan_dir(struct switch_device *switch_dev,
-+ int vlan_id, const struct switch_handler *handlers)
-+{
-+ char s[14];
-+ struct proc_dir_entry *pde = NULL;
-+ struct switch_vlan_entry *sve = NULL;
-+ int ret;
-+ struct list_head *pos;
-+
-+ /*
-+ * Check to see if it exists already
-+ */
-+ list_for_each(pos, &switch_dev->vlan_dirs) {
-+ sve = list_entry(pos, struct switch_vlan_entry, node);
-+ if (sve->vlan_id == vlan_id) {
-+ return -EEXIST;
-+ }
-+ }
-+ sve = NULL;
-+
-+ /*
-+ * Create the vlan directory if we didn't have it before
-+ */
-+ if (!switch_dev->vlan_dir) {
-+ switch_dev->vlan_dir = proc_mkdir("vlan",
-+ switch_dev->driver_dir);
-+ if (!switch_dev->vlan_dir) {
-+ goto fail;
-+ }
-+ if (switch_dev->vlan_handlers) {
-+ ret = switch_add_handlers(switch_dev,
-+ switch_dev->vlan_dir,
-+ switch_dev->vlan_handlers, 0);
-+ if (ret) {
-+ goto fail;
-+ }
-+ }
-+ }
-+
-+ /*
-+ * Create the vlan_id directory
-+ */
-+ snprintf(s, 14, "%d", vlan_id);
-+ pde = proc_mkdir(s, switch_dev->vlan_dir);
-+ if (!pde) {
-+ goto fail;
-+ }
-+
-+ /*
-+ * Create the handlers for this vlan
-+ */
-+ if (handlers) {
-+ ret = switch_add_handlers(switch_dev, pde, handlers, vlan_id);
-+ if (ret) {
-+ goto fail;
-+ }
-+ }
-+
-+ /*
-+ * Keep track of all the switch vlan entries created
-+ */
-+ sve = (struct switch_vlan_entry *)
-+ kzalloc(sizeof(struct switch_vlan_entry), GFP_KERNEL);
-+ if (!sve) {
-+ goto fail;
-+ }
-+ INIT_LIST_HEAD(&sve->node);
-+ sve->handlers = handlers;
-+ sve->vlan_id = vlan_id;
-+ sve->pde = pde;
-+ list_add(&sve->node, &switch_dev->vlan_dirs);
-+
-+ return 0;
-+
-+fail:
-+ if (sve) {
-+ kfree(sve);
-+ }
-+
-+ if (pde) {
-+ /*
-+ * Remove any proc entries we might have created
-+ */
-+ while (handlers->name) {
-+ remove_proc_entry(handlers->name, pde);
-+ handlers++;
-+ }
-+
-+ remove_proc_entry(s, switch_dev->driver_dir);
-+ }
-+
-+ return -ENOMEM;
-+}
-+
-+/*
-+ * switch_register_proc_nodes
-+ */
-+int switch_register_proc_nodes(struct switch_device *switch_dev)
-+{
-+ int i;
-+ int n;
-+
-+ switch_dev->port_dirs = kzalloc(switch_dev->ports *
-+ sizeof(struct proc_dir_entry *),
-+ GFP_KERNEL);
-+ if (!switch_dev->port_dirs) {
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Create a new proc entry for this switch
-+ */
-+ switch_dev->driver_dir = proc_mkdir(switch_dev->name, switch_root);
-+ if (!switch_dev->driver_dir) {
-+ goto fail;
-+ }
-+ if (switch_dev->driver_handlers) {
-+ switch_add_handlers(switch_dev,
-+ switch_dev->driver_dir,
-+ switch_dev->driver_handlers,
-+ 0);
-+ }
-+
-+ /*
-+ * Create the ports
-+ */
-+ switch_dev->port_dir = proc_mkdir("port", switch_dev->driver_dir);
-+ if (!switch_dev->port_dir) {
-+ goto fail;
-+ }
-+ for (n = 0, i = 0; i < (SWITCH_PORT_MASK_SIZE * 32); i++) {
-+ if (switch_dev->port_mask[i / 32] & (1 << i % 32)) {
-+ char s[14];
-+
-+ snprintf(s, 14, "%d", i);
-+ switch_dev->port_dirs[n] =
-+ proc_mkdir(s, switch_dev->port_dir);
-+ if (!switch_dev->port_dirs[n]) {
-+ goto fail;
-+ }
-+ if (switch_dev->port_handlers) {
-+ switch_add_handlers(switch_dev,
-+ switch_dev->port_dirs[n],
-+ switch_dev->port_handlers,
-+ i);
-+ }
-+ n++;
-+ }
-+ }
-+
-+ /*
-+ * Create the register directory for switch register access.
-+ */
-+ if (switch_dev->reg_handlers) {
-+ switch_dev->reg_dir = proc_mkdir("reg", switch_dev->driver_dir);
-+ if (!switch_dev->reg_dir) {
-+ goto fail;
-+ }
-+
-+ switch_add_handlers(switch_dev,
-+ switch_dev->reg_dir,
-+ switch_dev->reg_handlers,
-+ 0);
-+ }
-+
-+ /*
-+ * Create the vlan directory
-+ */
-+ if (switch_dev->vlan_handlers) {
-+ switch_dev->vlan_dir = proc_mkdir("vlan",
-+ switch_dev->driver_dir);
-+ if (!switch_dev->vlan_dir) {
-+ goto fail;
-+ }
-+ if (switch_dev->vlan_handlers) {
-+ switch_add_handlers(switch_dev,
-+ switch_dev->vlan_dir,
-+ switch_dev->vlan_handlers,
-+ 0);
-+ }
-+ }
-+
-+ return 0;
-+
-+fail:
-+ switch_unregister_proc_nodes(switch_dev);
-+ return -ENOMEM;
-+}
-+
-+/*
-+ * switch_release
-+ */
-+void switch_release(struct switch_device *switch_dev)
-+{
-+ kfree(switch_dev);
-+}
-+
-+/*
-+ * switch_alloc
-+ */
-+struct switch_device *switch_alloc(void)
-+{
-+ struct switch_device *switch_dev =
-+ kzalloc(sizeof(struct switch_device),
-+ GFP_KERNEL);
-+ INIT_LIST_HEAD(&switch_dev->node);
-+ INIT_LIST_HEAD(&switch_dev->vlan_dirs);
-+ INIT_LIST_HEAD(&switch_dev->handlers);
-+ return switch_dev;
-+}
-+
-+/*
-+ * switch_register
-+ */
-+int switch_register(struct switch_device *switch_dev)
-+{
-+ int ret;
-+ int i;
-+
-+ /*
-+ * Make sure that the number of ports and the port mask make sense
-+ */
-+ for (ret = 0, i = 0; i < (SWITCH_PORT_MASK_SIZE * 32); i++) {
-+ if (switch_dev->port_mask[i / 32] & (1 << i % 32)) {
-+ ret++;
-+ }
-+ }
-+ if (ret > switch_dev->ports) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Create the /proc entries
-+ */
-+ ret = switch_register_proc_nodes(switch_dev);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Add it to the list of switches
-+ */
-+ down_write(&switch_list_lock);
-+ list_add_tail(&switch_dev->node, &switch_list);
-+ up_write(&switch_list_lock);
-+
-+ printk(KERN_INFO "Registered switch device: %s\n", switch_dev->name);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(switch_register);
-+
-+/*
-+ * switch_unregister
-+ * Unregisters a previously registered switch_device object
-+ */
-+void switch_unregister(struct switch_device *switch_dev)
-+{
-+ /*
-+ * remove the proc entries
-+ */
-+ switch_unregister_proc_nodes(switch_dev);
-+
-+ /*
-+ * Remove it from the list of switches
-+ */
-+ down_write(&switch_list_lock);
-+ list_del(&switch_dev->node);
-+ up_write(&switch_list_lock);
-+
-+ printk(KERN_INFO "Unregistered switch device: %s\n", switch_dev->name);
-+}
-+EXPORT_SYMBOL_GPL(switch_unregister);
-+
-+/*
-+ * switch_init
-+ */
-+static int __init switch_init(void)
-+{
-+ switch_root = proc_mkdir("switch", NULL);
-+ if (!switch_root) {
-+ printk(KERN_WARNING "Failed to make root switch node\n");
-+ return -ENODEV;
-+ }
-+ return 0;
-+}
-+module_init(switch_init);
-+
-+/*
-+ * switch_exit
-+ */
-+static void __exit switch_exit(void)
-+{
-+ remove_proc_entry("switch", NULL);
-+}
-+module_exit(switch_exit);
-+
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Ethernet Switch Class Interface");
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/switch-core.h linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-core.h
---- linux-2.6.30.10/arch/ubicom32/mach-common/switch-core.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/switch-core.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,92 @@
-+/*
-+ * arch/ubicom32/mach-common/switch-core.h
-+ * Private data for the switch module
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _SWITCH_CORE_H_
-+#define _SWITCH_CORE_H_
-+
-+struct switch_handler_entry;
-+struct switch_vlan_entry;
-+
-+#define SWITCH_PORT_MASK_SIZE 2
-+
-+struct switch_device {
-+ struct list_head node;
-+
-+ const char *name;
-+ void *drvdata;
-+
-+ u8_t ports;
-+
-+ struct proc_dir_entry *driver_dir;
-+ const struct switch_handler *driver_handlers;
-+
-+ struct proc_dir_entry *port_dir;
-+ struct proc_dir_entry **port_dirs;
-+ const struct switch_handler *port_handlers;
-+
-+ struct proc_dir_entry *reg_dir;
-+ const struct switch_handler *reg_handlers;
-+
-+ struct proc_dir_entry *vlan_dir;
-+ const struct switch_handler *vlan_handlers;
-+ struct list_head vlan_dirs;
-+
-+ struct list_head handlers;
-+
-+ u32_t port_mask[SWITCH_PORT_MASK_SIZE];
-+};
-+
-+typedef int (*switch_handler_fn)(struct switch_device *, char *buf, int nr);
-+struct switch_handler {
-+ const char *name;
-+
-+ switch_handler_fn read;
-+ switch_handler_fn write;
-+};
-+
-+#define SWITCH_MAX_BUFSZ 4096
-+
-+static inline void switch_set_drvdata(struct switch_device *switch_dev, void *drvdata)
-+{
-+ switch_dev->drvdata = drvdata;
-+}
-+
-+static inline void *switch_get_drvdata(struct switch_device *switch_dev)
-+{
-+ return switch_dev->drvdata;
-+}
-+
-+extern int switch_create_vlan_dir(struct switch_device *switch_dev, int vlan_id, const struct switch_handler *handlers);
-+extern int switch_remove_vlan_dir(struct switch_device *switch_dev, int vlan_id);
-+extern void switch_parse_vlan_ports(struct switch_device *switch_dev, char *buf, u32_t *untag, u32_t *ports, u32_t *def);
-+
-+extern void switch_release(struct switch_device *switch_dev);
-+extern struct switch_device *switch_alloc(void);
-+extern int switch_register(struct switch_device *switch_dev);
-+extern void switch_unregister(struct switch_device *switch_dev);
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/ubi32-gpio.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubi32-gpio.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/ubi32-gpio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubi32-gpio.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,411 @@
-+/*
-+ * arch/ubicom32/mach-common/ubi32-gpio.c
-+ * Ubicom gpio driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/irq.h>
-+#include <linux/version.h>
-+
-+#if defined(CONFIG_PROC_FS)
-+#include <linux/proc_fs.h>
-+#endif
-+
-+#include <linux/io.h>
-+#include <asm/ip5000.h>
-+#include <linux/gpio.h>
-+
-+#define UBI_GPIO_CHECK_RANGE 0 /* !0 enables range checking */
-+
-+
-+/*
-+ * Each I/O port can be configured to operate in one of several
-+ * functional modes. One of these modes is GPIO, which causes the
-+ * entire port to function as a GPIO port. Since the various port
-+ * registers serve the system with other important functions, such as
-+ * ethernet, serial, USB, etc., it isn't advantageous to set any of
-+ * the ports to be entirely dedicated for GPIO use. The processor
-+ * alternatively allows individual bits of a port to be assigned to be
-+ * used as GPIO independently from the overall port function. This
-+ * bit-by-bit assignment is selected by setting the corresponding bit
-+ * in the port's gpio_mask register. When set, the selected bit is
-+ * then enabled as a GPIO. If the corresponding bit is set in the
-+ * gpio_ctl register of the port, the bit is configured as a GPIO
-+ * output. Otherwise, it is an input.
-+ *
-+ * NOTE: This driver uses the bit-by-bit GPIO function assignment
-+ * exclusively and *never* sets the port function registers to the
-+ * GPIO function.
-+ *
-+ * GPIO is not the main function of any of the I/O ports. The port
-+ * bit widths are variable from one port to the next, determined by
-+ * the more common I/O functions of the ports. For simplicity, this
-+ * driver assumes all the ports are 32 bits wide regardless of the
-+ * real bit width of the port. GPIO bits are numbered from zero to
-+ * MAX_UBICOM_GPIOS. Within a port, the least significant bit is
-+ * numbered bit zero, the most significant is bit 31. Since the ports
-+ * are considered logically contiguous, GPIO #32 is the zeroth bit in
-+ * port #1, and so on. Due to the hardware definition, there are
-+ * large gaps in the GPIO numbers representing real pins.
-+ *
-+ * NOTE: It is up to the programmer to refer to the processor data
-+ * sheet to determine which bits in which ports can be accessed and
-+ * used for GPIO.
-+ *
-+ */
-+
-+
-+/* There are 9 ports, A through I. Not all 32 bits in each
-+ * port can be a GPIO, but we pretend they are. Its up to the
-+ * programmer to refer to the processor data sheet.
-+ */
-+#define MAX_UBICOM_GPIOS (9 * 32) /* ARCH_NR_GPIOS */
-+#define NUM_GPIO_PORTS (gpio_bank(MAX_UBICOM_GPIOS))
-+
-+
-+/* GPIO reservation bit map array */
-+static int reserved_gpio_map[NUM_GPIO_PORTS];
-+
-+
-+/* Array of hardware io_port addresses */
-+static struct ubicom32_io_port *gpio_bank_addr[NUM_GPIO_PORTS] =
-+{
-+ UBICOM32_IO_PORT(RA),
-+ UBICOM32_IO_PORT(RB),
-+ UBICOM32_IO_PORT(RC),
-+ UBICOM32_IO_PORT(RD),
-+ UBICOM32_IO_PORT(RE),
-+ UBICOM32_IO_PORT(RF),
-+ UBICOM32_IO_PORT(RG),
-+ UBICOM32_IO_PORT(RH),
-+ UBICOM32_IO_PORT(RI)
-+};
-+
-+
-+struct ubi_gpio_chip {
-+ /*
-+ * Right now, nothing else lives here.
-+ */
-+ struct gpio_chip gpio_chip;
-+};
-+
-+
-+#if UBI_GPIO_CHECK_RANGE
-+inline int check_gpio(unsigned gpio)
-+{
-+ if (gpio >= MAX_UBICOM_GPIOS)
-+ return -EINVAL;
-+ return 0;
-+}
-+#else
-+#define check_gpio(n) (0)
-+#endif
-+
-+/*
-+ * ubi_gpio_get_port
-+ * Get the IO port associated with a certain gpio
-+ */
-+struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio)
-+{
-+ if (gpio_bank(gpio) > NUM_GPIO_PORTS) {
-+ return NULL;
-+ }
-+ return gpio_bank_addr[gpio_bank(gpio)];
-+}
-+
-+/*
-+ * ubi_gpio_error()
-+ */
-+static void ubi_gpio_error(unsigned gpio)
-+{
-+ printk(KERN_ERR "ubicom-gpio: GPIO %d wasn't requested!\n", gpio);
-+}
-+
-+/*
-+ * ubi_port_setup()
-+ */
-+static void ubi_port_setup(unsigned gpio, unsigned short usage)
-+{
-+ if (!check_gpio(gpio)) {
-+ if (usage) {
-+ UBICOM32_GPIO_ENABLE(gpio);
-+ } else {
-+ UBICOM32_GPIO_DISABLE(gpio);
-+ }
-+ }
-+}
-+
-+/*
-+ * ubi_gpio_request()
-+ */
-+static int ubi_gpio_request(struct gpio_chip *chip, unsigned gpio)
-+{
-+ unsigned long flags;
-+
-+ if (check_gpio(gpio) < 0)
-+ return -EINVAL;
-+
-+ local_irq_save(flags);
-+
-+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-+ printk(KERN_ERR "ubi-gpio: GPIO %d is already reserved!\n",
-+ gpio);
-+ local_irq_restore(flags);
-+ return -EBUSY;
-+ }
-+
-+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-+
-+ ubi_port_setup(gpio, 1);
-+
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi_gpio_free()
-+ */
-+static void ubi_gpio_free(struct gpio_chip *chip, unsigned gpio)
-+{
-+ unsigned long flags;
-+
-+ if (check_gpio(gpio) < 0)
-+ return;
-+
-+ local_irq_save(flags);
-+
-+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
-+ ubi_gpio_error(gpio);
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ /* Assert the pin is no longer claimed */
-+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-+
-+ /* Revert port bit to use specified by port->function */
-+ ubi_port_setup(gpio, 0);
-+
-+ local_irq_restore(flags);
-+}
-+
-+/*
-+ * ubi_gpio_direction_input()
-+ */
-+static int ubi_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+{
-+ unsigned long flags;
-+
-+ if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-+ ubi_gpio_error(gpio);
-+ return -EINVAL;
-+ }
-+
-+ local_irq_save(flags);
-+
-+ /* Configure pin as gpio */
-+ ubi_port_setup(gpio, 1);
-+
-+ /* Assert pin is an input */
-+ UBICOM32_GPIO_SET_PIN_INPUT(gpio);
-+
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * ubi_gpio_direction_output()
-+ */
-+static int ubi_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned gpio, int value)
-+{
-+ unsigned long flags;
-+
-+ if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-+ ubi_gpio_error(gpio);
-+ return -EINVAL;
-+ }
-+
-+ local_irq_save(flags);
-+
-+ /* Configure pin as gpio and set initial value in gpio_out register
-+ * so that when we enable it as an output, it will have the correct
-+ * initial value.
-+ */
-+ ubi_port_setup(gpio, 1);
-+ if (value) {
-+ UBICOM32_GPIO_SET_PIN_HIGH(gpio);
-+ } else {
-+ UBICOM32_GPIO_SET_PIN_LOW(gpio);
-+ }
-+
-+ /* Enable the pin as an output */
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(gpio);
-+
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * ubi_gpio_get_value()
-+ */
-+static int ubi_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-+{
-+ return 0 != (gpio_bank_addr[gpio_bank(gpio)]->gpio_in & gpio_bit(gpio));
-+}
-+
-+
-+/*
-+ * ubi_gpio_set_value()
-+ */
-+static void ubi_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
-+ int arg)
-+{
-+ unsigned long flags;
-+ local_irq_save(flags);
-+
-+ if (arg) {
-+ UBICOM32_GPIO_SET_PIN_HIGH(gpio);
-+ } else {
-+ UBICOM32_GPIO_SET_PIN_LOW(gpio);
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+
-+/*
-+ * ubi_gpio_to_irq()
-+ */
-+static int ubi_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+ return gpio_to_irq(gpio);
-+}
-+
-+
-+/*
-+ * ubi_gpio_init()
-+ */
-+int __init ubi_gpio_init(void)
-+{
-+ int k;
-+ int status;
-+ struct ubi_gpio_chip *chip;
-+ struct gpio_chip *gc;
-+
-+ printk(KERN_INFO "Ubicom GPIO Controller\n");
-+
-+ chip = kzalloc(sizeof(struct ubi_gpio_chip), GFP_KERNEL);
-+ if (chip == NULL)
-+ return -ENOMEM;
-+
-+ gc = &chip->gpio_chip;
-+ gc->request = ubi_gpio_request;
-+ gc->free = ubi_gpio_free;
-+ gc->to_irq = ubi_gpio_to_irq;
-+ gc->direction_input = ubi_gpio_direction_input;
-+ gc->direction_output = ubi_gpio_direction_output;
-+ gc->get = ubi_gpio_get_value;
-+ gc->set = ubi_gpio_set_value;
-+ gc->can_sleep = 0;
-+ gc->base = 0;
-+ gc->ngpio = MAX_UBICOM_GPIOS; /* ARCH_NR_GPIOS - 1 */
-+ gc->label = "ubi_gpio";
-+
-+ status = gpiochip_add(gc);
-+ if (status != 0) {
-+ kfree(chip);
-+ return status;
-+ }
-+
-+ /* Assert all pins are free */
-+ for (k = 0; k < NUM_GPIO_PORTS; k++) {
-+ reserved_gpio_map[k] = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+#if defined(CONFIG_PROC_FS)
-+/*
-+ * ubi_get_gpio_dir()
-+ */
-+static int ubi_get_gpio_dir(unsigned gpio)
-+{
-+ if (gpio_bank_addr[gpio_bank(gpio)]->gpio_ctl & gpio_bit(gpio))
-+ return 1;
-+ else
-+ return 0;
-+}
-+
-+/*
-+ * gpio_proc_read()
-+ */
-+static int ubi_gpio_proc_read(char *buf, char **start, off_t offset,
-+ int len, int *unused_i, void *unused_v)
-+{
-+ int c, outlen = 0;
-+
-+ for (c = 0; c < MAX_UBICOM_GPIOS; c++) {
-+ if (!check_gpio(c) &&
-+ (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) {
-+ len = sprintf(buf, "GPIO_%d:\t\tGPIO %s\n", c,
-+ ubi_get_gpio_dir(c) ? "OUTPUT" : "INPUT");
-+ } else {
-+ continue;
-+ }
-+
-+ buf += len;
-+ outlen += len;
-+ }
-+ return outlen;
-+}
-+
-+/*
-+ * ubi_gpio_register_proc()
-+ */
-+static __init int ubi_gpio_register_proc(void)
-+{
-+ struct proc_dir_entry *proc_gpio;
-+
-+ proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL);
-+ if (proc_gpio)
-+ proc_gpio->read_proc = ubi_gpio_proc_read;
-+
-+ return proc_gpio != NULL;
-+}
-+device_initcall(ubi_gpio_register_proc);
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/ubicom32hid.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubicom32hid.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/ubicom32hid.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubicom32hid.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,557 @@
-+/*
-+ * arch/ubicom32/mach-common/ubicom32hid.c
-+ * I2C driver for HID coprocessor found on some DPF implementations.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/gpio.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/i2c.h>
-+#include <linux/backlight.h>
-+#include <linux/fb.h>
-+#include <linux/input.h>
-+#include <linux/input-polldev.h>
-+
-+#include <asm/ubicom32hid.h>
-+
-+#define DRIVER_NAME "ubicom32hid"
-+
-+#ifdef DEBUG
-+static int ubicom32hid_debug;
-+#endif
-+
-+static const struct i2c_device_id ubicom32hid_id[] = {
-+ { DRIVER_NAME, },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, ubicom32hid_id);
-+
-+/*
-+ * Define this to make IR checking strict, in general, it's not needed
-+ */
-+#undef UBICOM32HID_STRICT_IR_CHECK
-+
-+#define UBICOM32HID_CMD_SET_PWM 0x01
-+#define UBICOM32HID_CMD_SET_BL_EN 0x02
-+#define UBICOM32HID_BL_EN_LOW 0x00
-+#define UBICOM32HID_BL_EN_HIZ 0x01
-+#define UBICOM32HID_BL_EN_HI 0x02
-+#define UBICOM32HID_CMD_FLUSH 0x99
-+#define UBICOM32HID_CMD_RESET 0x99
-+#define UBICOM32HID_CMD_GET_IR_SWITCH 0xC0
-+#define UBICOM32HID_CMD_GET_REVISION 0xfd
-+#define UBICOM32HID_CMD_GET_DEVICE_ID 0xfe
-+#define UBICOM32HID_CMD_GET_VERSION 0xff
-+#define UBICOM32HID_DEVICE_ID 0x49
-+
-+#define UBICOM32HID_MAX_BRIGHTNESS_PWM 255
-+
-+/*
-+ * Data structure returned by the HID device
-+ */
-+struct ubicom32hid_input_data {
-+ uint32_t ircmd;
-+ uint8_t sw_state;
-+ uint8_t sw_changed;
-+};
-+
-+/*
-+ * Our private data
-+ */
-+struct ubicom32hid_data {
-+ /*
-+ * Pointer to the platform data structure, we need the settings.
-+ */
-+ const struct ubicom32hid_platform_data *pdata;
-+
-+ /*
-+ * Backlight device
-+ */
-+ struct backlight_device *bldev;
-+
-+ /*
-+ * I2C client, for sending messages to the HID device
-+ */
-+ struct i2c_client *client;
-+
-+ /*
-+ * Current intensity, used for get_intensity.
-+ */
-+ int cur_intensity;
-+
-+ /*
-+ * Input subsystem
-+ * We won't register an input subsystem if there are no mappings.
-+ */
-+ struct input_polled_dev *poll_dev;
-+};
-+
-+
-+/*
-+ * ubicom32hid_set_intensity
-+ */
-+static int ubicom32hid_set_intensity(struct backlight_device *bd)
-+{
-+ struct ubicom32hid_data *ud =
-+ (struct ubicom32hid_data *)bl_get_data(bd);
-+ int intensity = bd->props.brightness;
-+ int reg;
-+ u8_t val;
-+ int ret;
-+
-+ /*
-+ * If we're blanked the the intensity doesn't matter.
-+ */
-+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
-+ (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
-+ intensity = 0;
-+ }
-+
-+ /*
-+ * Set the brightness based on the type of backlight
-+ */
-+ if (ud->pdata->type == UBICOM32HID_BL_TYPE_BINARY) {
-+ reg = UBICOM32HID_CMD_SET_BL_EN;
-+ if (intensity) {
-+ val = ud->pdata->invert
-+ ? UBICOM32HID_BL_EN_LOW : UBICOM32HID_BL_EN_HI;
-+ } else {
-+ val = ud->pdata->invert
-+ ? UBICOM32HID_BL_EN_HI : UBICOM32HID_BL_EN_LOW;
-+ }
-+ } else {
-+ reg = UBICOM32HID_CMD_SET_PWM;
-+ val = ud->pdata->invert
-+ ? (UBICOM32HID_MAX_BRIGHTNESS_PWM - intensity) :
-+ intensity;
-+ }
-+
-+ /*
-+ * Send the command
-+ */
-+ ret = i2c_smbus_write_byte_data(ud->client, reg, val);
-+ if (ret < 0) {
-+ dev_warn(&ud->client->dev, "Unable to write backlight err=%d\n",
-+ ret);
-+ return ret;
-+ }
-+
-+ ud->cur_intensity = intensity;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32hid_get_intensity
-+ * Return the current intensity of the backlight.
-+ */
-+static int ubicom32hid_get_intensity(struct backlight_device *bd)
-+{
-+ struct ubicom32hid_data *ud =
-+ (struct ubicom32hid_data *)bl_get_data(bd);
-+
-+ return ud->cur_intensity;
-+}
-+
-+/*
-+ * ubicom32hid_verify_data
-+ * Verify the data to see if there is any action to be taken
-+ *
-+ * Returns 0 if no action is to be taken, non-zero otherwise
-+ */
-+static int ubicom32hid_verify_data(struct ubicom32hid_data *ud,
-+ struct ubicom32hid_input_data *data)
-+{
-+ uint8_t *ircmd = (uint8_t *)&(data->ircmd);
-+
-+ /*
-+ * ircmd == DEADBEEF means ir queue is empty. Since this is a
-+ * meaningful code, that means the rest of the message is most likely
-+ * correct, so only process the data if the switch state has changed.
-+ */
-+ if (data->ircmd == 0xDEADBEEF) {
-+ return data->sw_changed != 0;
-+ }
-+
-+ /*
-+ * We have an ircmd which is not empty:
-+ * Data[1] should be the complement of Data[0]
-+ */
-+ if (ircmd[0] != (u8_t)~ircmd[1]) {
-+ return 0;
-+ }
-+
-+#ifdef UBICOM32HID_STRICT_IR_CHECK
-+ /*
-+ * It seems that some remote controls don't follow the NEC protocol
-+ * properly, so only do this check if the remote does indeed follow the
-+ * spec. Data[3] should be the complement of Data[2]
-+ */
-+ if (ircmd[2] == (u8_t)~ircmd[3]) {
-+ return 1;
-+ }
-+
-+ /*
-+ * For non-compliant remotes, check the system code according to what
-+ * they send.
-+ */
-+ if ((ircmd[2] != UBICOM32HID_IR_SYSTEM_CODE_CHECK) ||
-+ (ircmd[3] != UBICOM32HID_IR_SYSTEM_CODE)) {
-+ return 0;
-+ }
-+#endif
-+
-+ /*
-+ * Data checks out, process
-+ */
-+ return 1;
-+}
-+
-+/*
-+ * ubicom32hid_poll_input
-+ * Poll the input from the HID device.
-+ */
-+static void ubicom32hid_poll_input(struct input_polled_dev *dev)
-+{
-+ struct ubicom32hid_data *ud = (struct ubicom32hid_data *)dev->private;
-+ const struct ubicom32hid_platform_data *pdata = ud->pdata;
-+ struct ubicom32hid_input_data data;
-+ struct input_dev *id = dev->input;
-+ int i;
-+ int sync_needed = 0;
-+ uint8_t cmd;
-+ int ret;
-+
-+ /*
-+ * Flush the queue
-+ */
-+ cmd = UBICOM32HID_CMD_FLUSH;
-+ ret = i2c_master_send(ud->client, &cmd, 1);
-+ if (ret < 0) {
-+ return;
-+ }
-+
-+ ret = i2c_smbus_read_i2c_block_data(
-+ ud->client, UBICOM32HID_CMD_GET_IR_SWITCH, 6, (void *)&data);
-+ if (ret < 0) {
-+ return;
-+ }
-+
-+ /*
-+ * Verify the data to see if there is any action to be taken
-+ */
-+ if (!ubicom32hid_verify_data(ud, &data)) {
-+ return;
-+ }
-+
-+#ifdef DEBUG
-+ if (ubicom32hid_debug) {
-+ printk("Polled ircmd=%8x swstate=%2x swchanged=%2x\n",
-+ data.ircmd, data.sw_state, data.sw_changed);
-+ }
-+#endif
-+
-+ /*
-+ * Process changed switches
-+ */
-+ if (data.sw_changed) {
-+ const struct ubicom32hid_button *ub = pdata->buttons;
-+ for (i = 0; i < pdata->nbuttons; i++, ub++) {
-+ uint8_t mask = (1 << ub->bit);
-+ if (!(data.sw_changed & mask)) {
-+ continue;
-+ }
-+
-+ sync_needed = 1;
-+ input_event(id, ub->type, ub->code,
-+ (data.sw_state & mask) ? 1 : 0);
-+ }
-+ }
-+ if (sync_needed) {
-+ input_sync(id);
-+ }
-+
-+ /*
-+ * Process ir codes
-+ */
-+ if (data.ircmd != 0xDEADBEEF) {
-+ const struct ubicom32hid_ir *ui = pdata->ircodes;
-+ for (i = 0; i < pdata->nircodes; i++, ui++) {
-+ if (ui->ir_code == data.ircmd) {
-+ /*
-+ * Simulate a up/down event
-+ */
-+ input_event(id, ui->type, ui->code, 1);
-+ input_sync(id);
-+ input_event(id, ui->type, ui->code, 0);
-+ input_sync(id);
-+ }
-+ }
-+ }
-+}
-+
-+
-+/*
-+ * Backlight ops
-+ */
-+static struct backlight_ops ubicom32hid_blops = {
-+ .get_brightness = ubicom32hid_get_intensity,
-+ .update_status = ubicom32hid_set_intensity,
-+};
-+
-+/*
-+ * ubicom32hid_probe
-+ */
-+static int ubicom32hid_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct ubicom32hid_platform_data *pdata;
-+ struct ubicom32hid_data *ud;
-+ int ret;
-+ int i;
-+ u8 version[2];
-+ char buf[1];
-+
-+ pdata = client->dev.platform_data;
-+ if (pdata == NULL) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * See if we even have a device available before allocating memory.
-+ *
-+ * Hard reset the device
-+ */
-+ ret = gpio_request(pdata->gpio_reset, "ubicom32hid-reset");
-+ if (ret < 0) {
-+ return ret;
-+ }
-+ gpio_direction_output(pdata->gpio_reset, pdata->gpio_reset_polarity);
-+ udelay(100);
-+ gpio_set_value(pdata->gpio_reset, !pdata->gpio_reset_polarity);
-+ udelay(100);
-+
-+ /*
-+ * soft reset the device. It sometimes takes a while to do this.
-+ */
-+ for (i = 0; i < 50; i++) {
-+ buf[0] = UBICOM32HID_CMD_RESET;
-+ ret = i2c_master_send(client, buf, 1);
-+ if (ret > 0) {
-+ break;
-+ }
-+ udelay(10000);
-+ }
-+ if (i == 50) {
-+ dev_warn(&client->dev, "Unable to reset device\n");
-+ goto fail;
-+ }
-+
-+ ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_DEVICE_ID);
-+ if (ret != UBICOM32HID_DEVICE_ID) {
-+ dev_warn(&client->dev, "Incorrect device id %02x\n", buf[0]);
-+ ret = -ENODEV;
-+ goto fail;
-+ }
-+
-+ ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_VERSION);
-+ if (ret < 0) {
-+ dev_warn(&client->dev, "Unable to get version\n");
-+ goto fail;
-+ }
-+ version[0] = ret;
-+
-+ ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_REVISION);
-+ if (ret < 0) {
-+ dev_warn(&client->dev, "Unable to get revision\n");
-+ goto fail;
-+ }
-+ version[1] = ret;
-+
-+ /*
-+ * Allocate our private data
-+ */
-+ ud = kzalloc(sizeof(struct ubicom32hid_data), GFP_KERNEL);
-+ if (!ud) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+ ud->pdata = pdata;
-+ ud->client = client;
-+
-+ /*
-+ * Register our backlight device
-+ */
-+ ud->bldev = backlight_device_register(DRIVER_NAME, &client->dev,
-+ ud, &ubicom32hid_blops);
-+ if (IS_ERR(ud->bldev)) {
-+ ret = PTR_ERR(ud->bldev);
-+ goto fail2;
-+ }
-+ platform_set_drvdata(client, ud);
-+
-+ /*
-+ * Start up the backlight with the requested intensity
-+ */
-+ ud->bldev->props.power = FB_BLANK_UNBLANK;
-+ ud->bldev->props.max_brightness =
-+ (pdata->type == UBICOM32HID_BL_TYPE_PWM) ?
-+ UBICOM32HID_MAX_BRIGHTNESS_PWM : 1;
-+ if (pdata->default_intensity < ud->bldev->props.max_brightness) {
-+ ud->bldev->props.brightness = pdata->default_intensity;
-+ } else {
-+ dev_warn(&client->dev, "Default brightness out of range, "
-+ "setting to max\n");
-+ ud->bldev->props.brightness = ud->bldev->props.max_brightness;
-+ }
-+
-+ ubicom32hid_set_intensity(ud->bldev);
-+
-+ /*
-+ * Check to see if we have any inputs
-+ */
-+ if (!pdata->nbuttons && !pdata->nircodes) {
-+ goto done;
-+ }
-+
-+ /*
-+ * We have buttons or codes, we must register an input device
-+ */
-+ ud->poll_dev = input_allocate_polled_device();
-+ if (!ud->poll_dev) {
-+ ret = -ENOMEM;
-+ goto fail3;
-+ }
-+
-+ /*
-+ * Setup the polling to default to 100ms
-+ */
-+ ud->poll_dev->poll = ubicom32hid_poll_input;
-+ ud->poll_dev->poll_interval =
-+ pdata->poll_interval ? pdata->poll_interval : 100;
-+ ud->poll_dev->private = ud;
-+
-+ ud->poll_dev->input->name =
-+ pdata->input_name ? pdata->input_name : "Ubicom32HID";
-+ ud->poll_dev->input->phys = "ubicom32hid/input0";
-+ ud->poll_dev->input->dev.parent = &client->dev;
-+ ud->poll_dev->input->id.bustype = BUS_I2C;
-+
-+ /*
-+ * Set the capabilities by running through the buttons and ir codes
-+ */
-+ for (i = 0; i < pdata->nbuttons; i++) {
-+ const struct ubicom32hid_button *ub = &pdata->buttons[i];
-+
-+ input_set_capability(ud->poll_dev->input,
-+ ub->type ? ub->type : EV_KEY, ub->code);
-+ }
-+
-+ for (i = 0; i < pdata->nircodes; i++) {
-+ const struct ubicom32hid_ir *ui = &pdata->ircodes[i];
-+
-+ input_set_capability(ud->poll_dev->input,
-+ ui->type ? ui->type : EV_KEY, ui->code);
-+ }
-+
-+ ret = input_register_polled_device(ud->poll_dev);
-+ if (ret) {
-+ goto fail3;
-+ }
-+
-+done:
-+ printk(KERN_INFO DRIVER_NAME ": enabled, version=%02x.%02x\n",
-+ version[0], version[1]);
-+
-+ return 0;
-+
-+fail3:
-+ gpio_free(ud->pdata->gpio_reset);
-+ backlight_device_unregister(ud->bldev);
-+fail2:
-+ kfree(ud);
-+fail:
-+ gpio_free(pdata->gpio_reset);
-+ return ret;
-+}
-+
-+/*
-+ * ubicom32hid_remove
-+ */
-+static int ubicom32hid_remove(struct i2c_client *client)
-+{
-+ struct ubicom32hid_data *ud =
-+ (struct ubicom32hid_data *)platform_get_drvdata(client);
-+
-+ gpio_free(ud->pdata->gpio_reset);
-+
-+ backlight_device_unregister(ud->bldev);
-+
-+ if (ud->poll_dev) {
-+ input_unregister_polled_device(ud->poll_dev);
-+ input_free_polled_device(ud->poll_dev);
-+ }
-+
-+ platform_set_drvdata(client, NULL);
-+
-+ kfree(ud);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver ubicom32hid_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ubicom32hid_probe,
-+ .remove = __exit_p(ubicom32hid_remove),
-+ .id_table = ubicom32hid_id,
-+};
-+
-+/*
-+ * ubicom32hid_init
-+ */
-+static int __init ubicom32hid_init(void)
-+{
-+ return i2c_add_driver(&ubicom32hid_driver);
-+}
-+module_init(ubicom32hid_init);
-+
-+/*
-+ * ubicom32hid_exit
-+ */
-+static void __exit ubicom32hid_exit(void)
-+{
-+ i2c_del_driver(&ubicom32hid_driver);
-+}
-+module_exit(ubicom32hid_exit);
-+
-+MODULE_AUTHOR("Pat Tjin <@ubicom.com>")
-+MODULE_DESCRIPTION("Ubicom HID driver");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/ubicom32input.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubicom32input.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/ubicom32input.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubicom32input.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,265 @@
-+/*
-+ * arch/ubicom32/mach-common/ubicom32input.c
-+ * Ubicom32 Input driver
-+ *
-+ * based on gpio-keys
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ *
-+ *
-+ * TODO: add groups for inputs which can be sampled together (i.e. I2C)
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/input.h>
-+#include <linux/input-polldev.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+
-+#include <asm/ubicom32input.h>
-+
-+struct ubicom32input_data {
-+ struct ubicom32input_platform_data *pdata;
-+
-+ struct input_polled_dev *poll_dev;
-+
-+ /*
-+ * collection of previous states for buttons
-+ */
-+ u8 prev_state[0];
-+};
-+
-+/*
-+ * ubicom32input_poll
-+ */
-+static void ubicom32input_poll(struct input_polled_dev *dev)
-+{
-+ struct ubicom32input_data *ud =
-+ (struct ubicom32input_data *)dev->private;
-+ struct ubicom32input_platform_data *pdata = ud->pdata;
-+ struct input_dev *id = dev->input;
-+ int i;
-+ int sync_needed = 0;
-+
-+ for (i = 0; i < pdata->nbuttons; i++) {
-+ const struct ubicom32input_button *ub = &pdata->buttons[i];
-+ int state = 0;
-+
-+ int val = gpio_get_value(ub->gpio);
-+
-+ /*
-+ * Check to see if the state changed from the last time we
-+ * looked
-+ */
-+ if (val == ud->prev_state[i]) {
-+ continue;
-+ }
-+
-+ /*
-+ * The state has changed, determine if we are "up" or "down"
-+ */
-+ ud->prev_state[i] = val;
-+
-+ if ((!val && ub->active_low) || (val && !ub->active_low)) {
-+ state = 1;
-+ }
-+
-+ input_event(id, ub->type, ub->code, state);
-+ sync_needed = 1;
-+ }
-+
-+ if (sync_needed) {
-+ input_sync(id);
-+ }
-+}
-+
-+/*
-+ * ubicom32input_probe
-+ */
-+static int __devinit ubicom32input_probe(struct platform_device *pdev)
-+{
-+ int i;
-+ struct ubicom32input_data *ud;
-+ struct input_polled_dev *poll_dev;
-+ struct input_dev *input_dev;
-+ struct ubicom32input_platform_data *pdata;
-+ int ret;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata) {
-+ return -EINVAL;
-+ }
-+
-+ ud = kzalloc(sizeof(struct ubicom32input_data) +
-+ pdata->nbuttons, GFP_KERNEL);
-+ if (!ud) {
-+ return -ENOMEM;
-+ }
-+ ud->pdata = pdata;
-+
-+ poll_dev = input_allocate_polled_device();
-+ if (!poll_dev) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ platform_set_drvdata(pdev, ud);
-+
-+ ud->poll_dev = poll_dev;
-+ poll_dev->private = ud;
-+ poll_dev->poll = ubicom32input_poll;
-+
-+ /*
-+ * Set the poll interval requested, default to 50 msec
-+ */
-+ if (pdata->poll_interval) {
-+ poll_dev->poll_interval = pdata->poll_interval;
-+ } else {
-+ poll_dev->poll_interval = 50;
-+ }
-+
-+ /*
-+ * Setup the input device
-+ */
-+ input_dev = poll_dev->input;
-+ input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input";
-+ input_dev->phys = "ubicom32input/input0";
-+ input_dev->dev.parent = &pdev->dev;
-+ input_dev->id.bustype = BUS_HOST;
-+
-+ /*
-+ * Reserve the GPIOs
-+ */
-+ for (i = 0; i < pdata->nbuttons; i++) {
-+ const struct ubicom32input_button *ub = &pdata->buttons[i];
-+
-+ ret = gpio_request(ub->gpio,
-+ ub->desc ? ub->desc : "ubicom32input");
-+ if (ret < 0) {
-+ pr_err("ubicom32input: failed to request "
-+ "GPIO %d ret=%d\n", ub->gpio, ret);
-+ goto fail2;
-+ }
-+
-+ ret = gpio_direction_input(ub->gpio);
-+ if (ret < 0) {
-+ pr_err("ubicom32input: failed to set "
-+ "GPIO %d to input ret=%d\n", ub->gpio, ret);
-+ goto fail2;
-+ }
-+
-+ /*
-+ * Set the previous state to the non-active stae
-+ */
-+ ud->prev_state[i] = ub->active_low;
-+
-+ input_set_capability(input_dev,
-+ ub->type ? ub->type : EV_KEY, ub->code);
-+ }
-+
-+ /*
-+ * Register
-+ */
-+ ret = input_register_polled_device(ud->poll_dev);
-+ if (ret) {
-+ goto fail2;
-+ }
-+
-+ return 0;
-+
-+fail2:
-+ /*
-+ * release the GPIOs we have already requested.
-+ */
-+ while (--i >= 0) {
-+ gpio_free(pdata->buttons[i].gpio);
-+ }
-+
-+fail:
-+ printk(KERN_ERR "Ubicom32Input: Failed to register driver %d", ret);
-+ platform_set_drvdata(pdev, NULL);
-+ input_free_polled_device(poll_dev);
-+ kfree(ud);
-+ return ret;
-+}
-+
-+/*
-+ * ubicom32input_remove
-+ */
-+static int __devexit ubicom32input_remove(struct platform_device *dev)
-+{
-+ struct ubicom32input_data *ud =
-+ (struct ubicom32input_data *)platform_get_drvdata(dev);
-+ int i;
-+
-+ /*
-+ * Free the GPIOs
-+ */
-+ for (i = 0; i < ud->pdata->nbuttons; i++) {
-+ gpio_free(ud->pdata->buttons[i].gpio);
-+ }
-+
-+ platform_set_drvdata(dev, NULL);
-+ input_unregister_polled_device(ud->poll_dev);
-+ input_free_polled_device(ud->poll_dev);
-+
-+ kfree(ud);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubicom32input_driver = {
-+ .driver = {
-+ .name = "ubicom32input",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ubicom32input_probe,
-+ .remove = __devexit_p(ubicom32input_remove),
-+};
-+
-+/*
-+ * ubicom32input_init
-+ */
-+static int __devinit ubicom32input_init(void)
-+{
-+ return platform_driver_register(&ubicom32input_driver);
-+}
-+
-+/*
-+ * ubicom32input_exit
-+ */
-+static void __exit ubicom32input_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32input_driver);
-+}
-+
-+module_init(ubicom32input_init);
-+module_exit(ubicom32input_exit);
-+
-+MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom32 Input Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:ubicom32-input");
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/ubicom32input_i2c.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubicom32input_i2c.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/ubicom32input_i2c.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/ubicom32input_i2c.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,325 @@
-+/*
-+ * arch/ubicom32/mach-common/ubicom32input_i2c.c
-+ * Ubicom32 Input driver for I2C
-+ * Supports PCA953x and family
-+ *
-+ * We hog the I2C device, turning it all to input.
-+ *
-+ * Based on gpio-keys, pca953x
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/input.h>
-+#include <linux/input-polldev.h>
-+#include <linux/i2c.h>
-+
-+#include <asm/ubicom32input_i2c.h>
-+
-+#define UBICOM32INPUT_I2C_REG_INPUT 0
-+#define UBICOM32INPUT_I2C_REG_OUTPUT 1
-+#define UBICOM32INPUT_I2C_REG_INVERT 2
-+#define UBICOM32INPUT_I2C_REG_DIRECTION 3
-+
-+static const struct i2c_device_id ubicom32input_i2c_id[] = {
-+ { "ubicom32in_pca9534", 8, },
-+ { "ubicom32in_pca9535", 16, },
-+ { "ubicom32in_pca9536", 4, },
-+ { "ubicom32in_pca9537", 4, },
-+ { "ubicom32in_pca9538", 8, },
-+ { "ubicom32in_pca9539", 16, },
-+ { "ubicom32in_pca9554", 8, },
-+ { "ubicom32in_pca9555", 16, },
-+ { "ubicom32in_pca9557", 8, },
-+ { "ubicom32in_max7310", 8, },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, ubicom32input_i2c_id);
-+
-+struct ubicom32input_i2c_data {
-+ struct ubicom32input_i2c_platform_data *pdata;
-+
-+ struct i2c_client *client;
-+
-+ struct input_polled_dev *poll_dev;
-+
-+ /*
-+ * collection of previous states for buttons
-+ */
-+ uint16_t prev_state;
-+
-+ uint8_t ngpios;
-+};
-+
-+/*
-+ * ubicom32input_i2c_write_reg
-+ * writes a register to the I2C device.
-+ */
-+static int ubicom32input_i2c_write_reg(struct ubicom32input_i2c_data *ud,
-+ int reg, uint16_t val)
-+{
-+ int ret;
-+
-+ if (ud->ngpios <= 8) {
-+ ret = i2c_smbus_write_byte_data(ud->client, reg, val);
-+ } else {
-+ ret = i2c_smbus_write_word_data(ud->client, reg << 1, val);
-+ }
-+
-+ if (ret < 0) {
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32input_i2c_read_reg
-+ * reads a register from the I2C device.
-+ */
-+static int ubicom32input_i2c_read_reg(struct ubicom32input_i2c_data *ud,
-+ int reg, uint16_t *val)
-+{
-+ int ret;
-+
-+ if (ud->ngpios <= 8) {
-+ ret = i2c_smbus_read_byte_data(ud->client, reg);
-+ } else {
-+ ret = i2c_smbus_read_word_data(ud->client, reg);
-+ }
-+
-+ if (ret < 0) {
-+ return ret;
-+ }
-+
-+ *val = (uint16_t)ret;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32input_i2c_poll
-+ */
-+static void ubicom32input_i2c_poll(struct input_polled_dev *dev)
-+{
-+ struct ubicom32input_i2c_data *ud =
-+ (struct ubicom32input_i2c_data *)dev->private;
-+ struct ubicom32input_i2c_platform_data *pdata = ud->pdata;
-+ struct input_dev *id = dev->input;
-+ int i;
-+ int sync_needed = 0;
-+ uint16_t val;
-+ uint16_t change_mask;
-+
-+ /*
-+ * Try to get the input status, if we fail, bail out, maybe we can do it
-+ * next time.
-+ */
-+ if (ubicom32input_i2c_read_reg(ud, UBICOM32INPUT_I2C_REG_INPUT, &val)) {
-+ return;
-+ }
-+
-+ /*
-+ * see if anything changed by using XOR
-+ */
-+ change_mask = ud->prev_state ^ val;
-+ ud->prev_state = val;
-+
-+ for (i = 0; i < pdata->nbuttons; i++) {
-+ const struct ubicom32input_i2c_button *ub = &pdata->buttons[i];
-+ uint16_t mask = 1 << ub->bit;
-+ int state = val & mask;
-+
-+ /*
-+ * Check to see if the state changed from the last time we
-+ * looked
-+ */
-+ if (!(change_mask & mask)) {
-+ continue;
-+ }
-+ input_event(id, ub->type, ub->code, state);
-+ sync_needed = 1;
-+ }
-+
-+ if (sync_needed) {
-+ input_sync(id);
-+ }
-+}
-+
-+/*
-+ * ubicom32input_i2c_probe
-+ */
-+static int __devinit ubicom32input_i2c_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ int i;
-+ struct ubicom32input_i2c_data *ud;
-+ struct input_polled_dev *poll_dev;
-+ struct input_dev *input_dev;
-+ struct ubicom32input_i2c_platform_data *pdata;
-+ int ret;
-+ uint16_t invert_mask = 0;
-+
-+ pdata = client->dev.platform_data;
-+ if (!pdata) {
-+ return -EINVAL;
-+ }
-+
-+ ud = kzalloc(sizeof(struct ubicom32input_i2c_data), GFP_KERNEL);
-+ if (!ud) {
-+ return -ENOMEM;
-+ }
-+ ud->pdata = pdata;
-+ ud->client = client;
-+ ud->ngpios = id->driver_data;
-+
-+ poll_dev = input_allocate_polled_device();
-+ if (!poll_dev) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ ud->poll_dev = poll_dev;
-+ poll_dev->private = ud;
-+ poll_dev->poll = ubicom32input_i2c_poll;
-+
-+ /*
-+ * Set the poll interval requested, default to 100 msec
-+ */
-+ if (pdata->poll_interval) {
-+ poll_dev->poll_interval = pdata->poll_interval;
-+ } else {
-+ poll_dev->poll_interval = 100;
-+ }
-+
-+ /*
-+ * Setup the input device
-+ */
-+ input_dev = poll_dev->input;
-+ input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input I2C";
-+ input_dev->phys = "ubicom32input_i2c/input0";
-+ input_dev->dev.parent = &client->dev;
-+ input_dev->id.bustype = BUS_I2C;
-+
-+ /*
-+ * Set the capabilities
-+ */
-+ for (i = 0; i < pdata->nbuttons; i++) {
-+ const struct ubicom32input_i2c_button *ub = &pdata->buttons[i];
-+
-+ if (ub->active_low) {
-+ invert_mask |= (1 << ub->bit);
-+ }
-+
-+ input_set_capability(input_dev,
-+ ub->type ? ub->type : EV_KEY, ub->code);
-+ }
-+
-+ /*
-+ * Setup the device (all inputs)
-+ */
-+ ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_DIRECTION,
-+ 0xFFFF);
-+ if (ret < 0) {
-+ goto fail;
-+ }
-+
-+ ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_INVERT,
-+ invert_mask);
-+ if (ret < 0) {
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register
-+ */
-+ ret = input_register_polled_device(ud->poll_dev);
-+ if (ret) {
-+ goto fail;
-+ }
-+
-+ i2c_set_clientdata(client, ud);
-+
-+ return 0;
-+
-+fail:
-+ printk(KERN_ERR "ubicom32input_i2c: Failed to register driver %d\n",
-+ ret);
-+ input_free_polled_device(poll_dev);
-+ kfree(ud);
-+ return ret;
-+}
-+
-+/*
-+ * ubicom32input_i2c_remove
-+ */
-+static int __devexit ubicom32input_i2c_remove(struct i2c_client *client)
-+{
-+ struct ubicom32input_i2c_data *ud =
-+ (struct ubicom32input_i2c_data *)i2c_get_clientdata(client);
-+
-+ i2c_set_clientdata(client, NULL);
-+ input_unregister_polled_device(ud->poll_dev);
-+ input_free_polled_device(ud->poll_dev);
-+
-+ kfree(ud);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver ubicom32input_i2c_driver = {
-+ .driver = {
-+ .name = "ubicom32input_i2c",
-+ .owner = THIS_MODULE,
-+ },
-+ .remove = __devexit_p(ubicom32input_i2c_remove),
-+ .id_table = ubicom32input_i2c_id,
-+ .probe = ubicom32input_i2c_probe,
-+};
-+
-+/*
-+ * ubicom32input_i2c_init
-+ */
-+static int __devinit ubicom32input_i2c_init(void)
-+{
-+ return i2c_add_driver(&ubicom32input_i2c_driver);
-+}
-+
-+/*
-+ * ubicom32input_i2c_exit
-+ */
-+static void __exit ubicom32input_i2c_exit(void)
-+{
-+ i2c_del_driver(&ubicom32input_i2c_driver);
-+}
-+
-+module_init(ubicom32input_i2c_init);
-+module_exit(ubicom32input_i2c_exit);
-+
-+MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom32 Input Driver I2C");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:ubicom32-input");
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/usb.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/usb.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/usb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/usb.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,132 @@
-+/*
-+ * arch/ubicom32/mach-common/ip5k_usb.c
-+ * Ubicom32 architecture usb support.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
-+ * Author: Kevin Hilman
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can
-+ * redistribute it and/or modify it under the terms of the GNU General
-+ * Public License as published by the Free Software Foundation, either
-+ * version 2 of the License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+ * See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/usb/musb.h>
-+#include <asm/devtree.h>
-+#include <asm/ip5000.h>
-+#include "usb_tio.h"
-+
-+struct usbtionode *unode = NULL;
-+
-+static struct resource usb_resources[] = {
-+ [0] = {
-+ .start = RJ + 0x800,
-+ .end = RJ + 0x1000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* general IRQ */
-+ .start = 1, /* this is a dummy value, the real irq number is passed from kernel_setup_param */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+
-+static struct musb_hdrc_eps_bits musb_eps[] = {
-+ { "ep1_tx", 4, },
-+ { "ep1_rx", 4, },
-+ { "ep2_tx", 10, },
-+ { "ep2_rx", 10, },
-+ { "ep3_tx", 9, },
-+ { "ep3_rx", 9, },
-+ { "ep4_tx", 9, },
-+ { "ep4_rx", 9, },
-+ { "ep5_tx", 6, },
-+ { "ep5_rx", 6, },
-+};
-+
-+static struct musb_hdrc_config musb_config = {
-+ .multipoint = true,
-+ .dyn_fifo = false,
-+ .soft_con = true,
-+ .dma = false,
-+
-+ .num_eps = 6,
-+ .dma_channels = 0,
-+ .ram_bits = 0,
-+ .eps_bits = musb_eps,
-+};
-+
-+static struct musb_hdrc_platform_data usb_data = {
-+#ifdef CONFIG_USB_MUSB_OTG
-+ .mode = MUSB_OTG,
-+#else
-+#ifdef CONFIG_USB_MUSB_HDRC_HCD
-+ .mode = MUSB_HOST,
-+#else
-+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-+ .mode = MUSB_PERIPHERAL,
-+#endif
-+#endif
-+#endif
-+ .clock = NULL,
-+ .set_clock = NULL,
-+ .config = &musb_config,
-+};
-+
-+static struct platform_device musb_device = {
-+ .name = "musb_hdrc",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usb_data,
-+ .dma_mask = NULL,
-+ .coherent_dma_mask = 0,
-+ },
-+ .resource = usb_resources,
-+ .num_resources = ARRAY_SIZE(usb_resources),
-+};
-+
-+struct usbtio_node *usb_node = NULL;
-+void ubi32_usb_init(void)
-+{
-+ /*
-+ * See if the usbtio is in the device tree.
-+ */
-+ usb_node = (struct usbtio_node *)devtree_find_node("usbtio");
-+ if (!usb_node) {
-+ printk(KERN_WARNING "usb init failed\n");
-+ return;
-+ }
-+
-+ usb_resources[1].start = usb_node->dn.recvirq;
-+ if (platform_device_register(&musb_device) < 0) {
-+ printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
-+ return;
-+ }
-+}
-+
-+void ubi32_usb_int_clr(void)
-+{
-+ UBICOM32_IO_PORT(RJ)->int_clr = (1 << 3);
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/usb_tio.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/usb_tio.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/usb_tio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/usb_tio.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,356 @@
-+/*
-+ * arch/ubicom32/mach-common/usb_tio.c
-+ * Linux side Ubicom USB TIO driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <asm/devtree.h>
-+#include "usb_tio.h"
-+
-+#ifdef CONFIG_SMP
-+static DEFINE_SPINLOCK(tio_lock);
-+#define USB_TIO_LOCK(lock, flag) spin_lock_irqsave(lock, flag)
-+#define USB_TIO_UNLOCK(lock, flag) spin_unlock_irqrestore(lock, flag)
-+#define USB_TIO_LOCK_ISLOCKED(lock) spin_try_lock(lock)
-+#else
-+#define USB_TIO_LOCK(lock, flag) local_irq_save(flag)
-+#define USB_TIO_UNLOCK(lock, flag) local_irq_restore(flag)
-+#endif
-+
-+spinlock_t usb_tio_lock;
-+
-+/*
-+ * usb_tio_set_hrt_interrupt()
-+ */
-+static inline void usb_tio_set_hrt_interrupt(void)
-+{
-+ ubicom32_set_interrupt(usb_node->dn.sendirq);
-+}
-+
-+static inline void usb_tio_wait_hrt(void)
-+{
-+ while (unlikely(usb_node->pdesc));
-+}
-+
-+#if defined(USB_TIO_DEBUG)
-+static void usb_tio_request_verify_magic(volatile struct usb_tio_request *req)
-+{
-+ BUG_ON(req->magic != USB_TIO_REQUEST_MAGIC2);
-+}
-+
-+static void usb_tio_request_clear_magic(volatile struct usb_tio_request *req)
-+{
-+ req->magic = 0;
-+}
-+#endif
-+
-+static void usb_tio_request_set_magic(volatile struct usb_tio_request *req)
-+{
-+ req->magic = USB_TIO_REQUEST_MAGIC1;
-+}
-+
-+/*
-+ * usb_tio_commit_request()
-+ */
-+static inline void usb_tio_commit_request(volatile struct usb_tio_request *request)
-+{
-+ wmb();
-+ usb_node->pdesc = request;
-+
-+ /*
-+ * next thing to do is alway checking if (usb_node->pdesc == NULL)
-+ * to see if the request is done, so add a mb() here
-+ */
-+ mb();
-+ usb_tio_set_hrt_interrupt();
-+}
-+
-+/*
-+ * usb_tio_read_u16()
-+ * Synchronously read 16 bits.
-+ */
-+u8_t usb_tio_read_u16(u32_t address, u16_t *data)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ /*
-+ * Wait for any previous request to complete and then make this request.
-+ */
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ /*
-+ * Fill in the request.
-+ */
-+ tio_req->address = address;
-+ tio_req->cmd = USB_TIO_READ16_SYNC;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+ usb_tio_commit_request(tio_req);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ usb_tio_wait_hrt();
-+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
-+ *data = (u16_t)tio_req->data;
-+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_read_u8()
-+ * Synchronously read 16 bits.
-+ */
-+u8_t usb_tio_read_u8(u32_t address, u8_t *data)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ /*
-+ * Wait for any previous request to complete and then make this request.
-+ */
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ /*
-+ * Fill in the request.
-+ */
-+ tio_req->address = address;
-+ tio_req->cmd = USB_TIO_READ8_SYNC;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+
-+ /*
-+ * commit the request
-+ */
-+ usb_tio_commit_request(tio_req);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ usb_tio_wait_hrt();
-+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
-+ *data = (u8_t)tio_req->data;
-+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_write_u16()
-+ * Asynchronously write 16 bits.
-+ */
-+u8_t usb_tio_write_u16(u32_t address, u16_t data)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ /*
-+ * Wait for any previous write or pending read to complete.
-+ */
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ tio_req->address = address;
-+ tio_req->data = data;
-+ tio_req->cmd = USB_TIO_WRITE16_ASYNC;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+
-+ /*
-+ * commit the request
-+ */
-+ usb_tio_commit_request(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_write_u8()
-+ * Asynchronously write 8 bits.
-+ */
-+u8_t usb_tio_write_u8(u32_t address, u8_t data)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ /*
-+ * Wait for any previous write or pending read to complete.
-+ */
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ tio_req->address = address;
-+ tio_req->data = data;
-+ tio_req->cmd = USB_TIO_WRITE8_ASYNC;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+
-+ /*
-+ * commit the request
-+ */
-+ usb_tio_commit_request(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_read_fifo()
-+ * Synchronously read FIFO.
-+ */
-+u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ /*
-+ * Wait for any previous request to complete and then make this request.
-+ */
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ /*
-+ * Fill in the request.
-+ */
-+ tio_req->address = address;
-+ tio_req->cmd = USB_TIO_READ_FIFO_SYNC;
-+ tio_req->buffer = buffer;
-+ tio_req->transfer_length = bytes;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+
-+ /*
-+ * commit the request
-+ */
-+ usb_tio_commit_request(tio_req);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ usb_tio_wait_hrt();
-+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
-+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_write_fifo()
-+ * Synchronously write 32 bits.
-+ */
-+u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ tio_req->address = address;
-+ tio_req->buffer = buffer;
-+ tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC;
-+ tio_req->transfer_length = bytes;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+ /*
-+ * commit the request
-+ */
-+ usb_tio_commit_request(tio_req);
-+
-+ /*
-+ * Wait for the result to show up.
-+ */
-+ usb_tio_wait_hrt();
-+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
-+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_write_fifo_async()
-+ * Asynchronously write 32 bits.
-+ */
-+u8_t usb_tio_write_fifo_async(u32_t address, u32_t buffer, u32_t bytes)
-+{
-+ volatile struct usb_tio_request *tio_req = &usb_node->request;
-+ unsigned long flag;
-+
-+ USB_TIO_LOCK(&tio_lock, flag);
-+ usb_tio_wait_hrt();
-+
-+ tio_req->address = address;
-+
-+ /*
-+ * Is it necessary to make a local copy of the buffer? Any chance the URB is aborted before TIO finished the FIFO write?
-+ */
-+ tio_req->buffer = buffer;
-+ tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC;
-+ tio_req->transfer_length = bytes;
-+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
-+ /*
-+ * commit the request
-+ */
-+ usb_tio_commit_request(tio_req);
-+ USB_TIO_UNLOCK(&tio_lock, flag);
-+ return USB_TIO_OK;
-+}
-+
-+/*
-+ * usb_tio_read_int_status()
-+ * read and clear the interrupt status registers
-+ */
-+void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
-+{
-+
-+ /*
-+ * clear the interrupt must be syncronized with the TIO thread to prevent the racing condiiton
-+ * that TIO thread try to set it at same time
-+ */
-+ asm volatile (
-+ "1: bset (%0), (%0), #0 \n\t" \
-+ " jmpne.f 1b \n\t" \
-+ :
-+ : "a" (&usb_node->usb_vp_control)
-+ : "memory", "cc"
-+ );
-+
-+ *int_usb = usb_node->usb_vp_hw_int_usb;
-+ *int_tx = cpu_to_le16(usb_node->usb_vp_hw_int_tx);
-+ *int_rx = cpu_to_le16(usb_node->usb_vp_hw_int_rx);
-+
-+ //printk(KERN_INFO "int read %x, %x, %x\n", *int_usb, *int_tx, *int_rx);
-+
-+ /*
-+ * The interrupt status register is read-clean, so clear it now
-+ */
-+ usb_node->usb_vp_hw_int_usb = 0;
-+ usb_node->usb_vp_hw_int_tx = 0;
-+ usb_node->usb_vp_hw_int_rx = 0;
-+
-+ /*
-+ * release the lock bit
-+ */
-+ usb_node->usb_vp_control &= 0xfffe;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/usb_tio.h linux-2.6.30.10-ubi/arch/ubicom32/mach-common/usb_tio.h
---- linux-2.6.30.10/arch/ubicom32/mach-common/usb_tio.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/usb_tio.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,111 @@
-+/*
-+ * arch/ubicom32/mach-common/usb_tio.h
-+ * Definitions for usb_tio.c
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/err.h>
-+#include <asm/devtree.h>
-+#include <asm/ip5000.h>
-+
-+#ifndef _USB_TIO_H
-+#define _USB_TIO_H
-+
-+#undef USB_TIO_DEBUG
-+
-+#define USB_TIO_REQUEST_MAGIC1 0x2307
-+#define USB_TIO_REQUEST_MAGIC2 0x0789
-+#if defined(USB_TIO_DEBUG)
-+#define USB_TIO_REQUEST_VERIFY_MAGIC(req) usb_tio_request_verify_magic(req)
-+#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req)
-+#define USB_TIO_REQUEST_CLEAR_MAGIC(req) usb_tio_request_clear_magic(req)
-+#else
-+#define USB_TIO_REQUEST_VERIFY_MAGIC(req)
-+#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req)
-+#define USB_TIO_REQUEST_CLEAR_MAGIC(req)
-+#endif
-+
-+enum USB_TIO_status {
-+ USB_TIO_OK,
-+ USB_TIO_ERROR,
-+ USB_TIO_ERROR_COMMIT,
-+};
-+
-+enum USB_TIO_cmds {
-+ USB_TIO_READ16_SYNC,
-+ USB_TIO_READ8_SYNC,
-+ USB_TIO_READ_FIFO_SYNC,
-+
-+ USB_TIO_WRITE16_ASYNC,
-+ USB_TIO_WRITE8_ASYNC,
-+ USB_TIO_WRITE_FIFO_ASYNC,
-+
-+ USB_TIO_WRITE16_SYNC,
-+ USB_TIO_WRITE8_SYNC,
-+ USB_TIO_WRITE_FIFO_SYNC,
-+
-+};
-+
-+enum USB_TIO_state {
-+ USB_TIO_NORMAL,
-+ USB_TIO_DMA_SETUP,
-+};
-+
-+struct usb_tio_request {
-+ volatile u32_t address;
-+ union {
-+ volatile u32_t data;
-+ volatile u32_t buffer;
-+ };
-+ volatile u16_t cmd;
-+ const volatile u16_t status;
-+ volatile u32_t transfer_length;
-+ volatile u32_t thread_mask;
-+ volatile u16_t magic;
-+};
-+
-+struct usbtio_node {
-+ struct devtree_node dn;
-+ volatile struct usb_tio_request * volatile pdesc;
-+ struct usb_tio_request request;
-+ volatile u32_t usb_vp_config;
-+ volatile u32_t usb_vp_control;
-+ const volatile u32_t usb_vp_status;
-+ volatile u16_t usb_vp_hw_int_tx;
-+ volatile u16_t usb_vp_hw_int_rx;
-+ volatile u8_t usb_vp_hw_int_usb;
-+ volatile u8_t usb_vp_hw_int_mask_usb;
-+ volatile u16_t usb_vp_hw_int_mask_tx;
-+ volatile u16_t usb_vp_hw_int_mask_rx;
-+
-+};
-+
-+extern struct usbtio_node *usb_node;
-+extern void ubi32_usb_init(void);
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-common/vdc_tio.c linux-2.6.30.10-ubi/arch/ubicom32/mach-common/vdc_tio.c
---- linux-2.6.30.10/arch/ubicom32/mach-common/vdc_tio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-common/vdc_tio.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,111 @@
-+/*
-+ * arch/ubicom32/mach-common/vdc_tio.c
-+ * Generic initialization for VDC
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+
-+#include <asm/devtree.h>
-+#include <asm/vdc_tio.h>
-+
-+/*
-+ * Resources that this driver uses
-+ */
-+static struct resource vdc_tio_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ (optional)
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+/*
-+ * The platform_device structure which is passed to the driver
-+ */
-+static struct platform_device vdc_tio_platform_device = {
-+ .name = "ubicom32fb",
-+ .id = -1,
-+ .resource = vdc_tio_resources,
-+ .num_resources = ARRAY_SIZE(vdc_tio_resources),
-+};
-+
-+/*
-+ * vdc_tio_init
-+ * Checks the device tree and instantiates the driver if found
-+ */
-+void __init vdc_tio_init(void)
-+{
-+ /*
-+ * Check the device tree for the vdc_tio
-+ */
-+ struct vdc_tio_node *vdc_node =
-+ (struct vdc_tio_node *)devtree_find_node("vdctio");
-+ if (!vdc_node) {
-+ printk(KERN_WARNING "No vdc_tio found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ vdc_tio_resources[0].start = vdc_node->dn.sendirq;
-+ vdc_tio_resources[1].start = vdc_node->dn.recvirq;
-+ vdc_tio_resources[2].start = (u32_t)vdc_node->regs;
-+ vdc_tio_resources[2].end = (u32_t)vdc_node->regs +
-+ sizeof(struct vdc_tio_vp_regs);
-+
-+ /*
-+ * Try to get the device registered
-+ */
-+ if (platform_device_register(&vdc_tio_platform_device) < 0) {
-+ printk(KERN_WARNING "VDC failed to register\n");
-+ }
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip5k/board-ip5160dev.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/board-ip5160dev.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip5k/board-ip5160dev.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/board-ip5160dev.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/ubicom32/mach-ip5k/board-ip5160dev.c
-+ * Platform initialization for ip5160dev board.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+#include <asm/ubicom32suart.h>
-+#endif
-+
-+/*
-+ * Factory Default Button on the board at PXn
-+ * TODO: This is just a placeholder and it needs to include proper header files
-+ */
-+struct ubicom32fdb_platform_data {
-+ int fdb_gpio;
-+ bool fdb_polarity;
-+};
-+
-+static struct ubicom32fdb_platform_data ip5160dev_fdb_data = {
-+ .fdb_gpio = 0,
-+ .fdb_polarity = true,
-+};
-+
-+static struct platform_device ip5160dev_fdb_device = {
-+ .name = "ubicom32fdb",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip5160dev_fdb_data,
-+ },
-+};
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+static struct resource ip5160dev_ubicom32_suart_resources[] = {
-+ {
-+ .start = RD,
-+ .end = RD,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = PORT_OTHER_INT(RD),
-+ .end = PORT_OTHER_INT(RD),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = 240000000,
-+ .end = 240000000,
-+ .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
-+ },
-+};
-+
-+static struct platform_device ip5160dev_ubicom32_suart_device = {
-+ .name = "ubicom32suart",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(ip5160dev_ubicom32_suart_resources),
-+ .resource = ip5160dev_ubicom32_suart_resources,
-+};
-+#endif
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip5160dev_devices[] __initdata = {
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+ &ip5160dev_ubicom32_suart_device,
-+#endif
-+ &ip5160dev_fdb_device,
-+};
-+
-+/*
-+ * ip5160dev_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip5160dev_init(void)
-+{
-+ ubi_gpio_init();
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip5160dev_devices, ARRAY_SIZE(ip5160dev_devices));
-+ return 0;
-+}
-+
-+arch_initcall(ip5160dev_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip5k/board-ip5160rgw.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/board-ip5160rgw.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip5k/board-ip5160rgw.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/board-ip5160rgw.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,75 @@
-+/*
-+ * arch/ubicom32/mach-ip5k/board-ip5160rgw.c
-+ * Platform initialization for ip5160rgw board.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+
-+/*
-+ * Factory Default Button on the board at PXn
-+ * TODO: This is just a placeholder and it needs to include proper header files
-+ */
-+struct ubicom32fdb_platform_data {
-+ int fdb_gpio;
-+ bool fdb_polarity;
-+};
-+
-+static struct ubicom32fdb_platform_data ip5160rgw_fdb_data = {
-+ .fdb_gpio = 0,
-+ .fdb_polarity = true,
-+};
-+
-+static struct platform_device ip5160rgw_fdb_device = {
-+ .name = "ubicom32fdb",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip5160rgw_fdb_data,
-+ },
-+};
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip5160rgw_devices[] __initdata = {
-+ &ip5160rgw_fdb_device,
-+};
-+
-+/*
-+ * ip5160rgw_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip5160rgw_init(void)
-+{
-+ ubi_gpio_init();
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip5160rgw_devices, ARRAY_SIZE(ip5160rgw_devices));
-+ return 0;
-+}
-+
-+arch_initcall(ip5160rgw_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip5k/board-ip5170dpf.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/board-ip5170dpf.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip5k/board-ip5170dpf.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/board-ip5170dpf.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,279 @@
-+/*
-+ * arch/ubicom32/mach-ip5k/board-ip5170dpf.c
-+ * Platform initialization for ip5160dpf board.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <linux/leds.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+
-+#include <linux/input.h>
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ubicom32hid.h>
-+#include <asm/vdc_tio.h>
-+
-+/*
-+ * LEDs
-+ *
-+ * WLAN PD9 (Note this is shared with MISO, but we don't use it)
-+ * WPS PD8
-+ *
-+ * TODO: check triggers, are they generic?
-+ */
-+static struct gpio_led ip5170dpf_gpio_leds[] = {
-+ {
-+ .name = "d31:green:WLAN1",
-+ .default_trigger = "WLAN1",
-+ .gpio = GPIO_RD_9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "d30:green:WPS",
-+ .default_trigger = "WPS",
-+ .gpio = GPIO_RD_8,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data ip5170dpf_gpio_led_platform_data = {
-+ .num_leds = 2,
-+ .leds = ip5170dpf_gpio_leds,
-+};
-+
-+static struct platform_device ip5170dpf_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip5170dpf_gpio_led_platform_data,
-+ },
-+};
-+
-+/*
-+ * Backlight on the board PD0, hardware PWM
-+ */
-+static const struct ubicom32hid_button ip5170dpf_ubicom32hid_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_UP,
-+ .bit = 0,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_LEFT,
-+ .bit = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_RIGHT,
-+ .bit = 2,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_DOWN,
-+ .bit = 3,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ENTER,
-+ .bit = 4,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MENU,
-+ .bit = 5,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ESC,
-+ .bit = 7,
-+ },
-+};
-+
-+static const struct ubicom32hid_ir ip5170dpf_ubicom32hid_ircodes[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_UP,
-+ .ir_code = 0xF807916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_DOWN,
-+ .ir_code = 0xF20D916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_LEFT,
-+ .ir_code = 0xF609916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_RIGHT,
-+ .ir_code = 0xF40B916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ENTER,
-+ .ir_code = 0xF50A916E
-+ },
-+ { /* rotate */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F1,
-+ .ir_code = 0xF906916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MENU,
-+ .ir_code = 0xF708916E
-+ },
-+ { /* font size */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F2,
-+ .ir_code = 0xF30C916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ESC,
-+ .ir_code = 0xF10E916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_VOLUMEUP,
-+ .ir_code = 0xF00F916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_VOLUMEDOWN,
-+ .ir_code = 0xED12916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MUTE,
-+ .ir_code = 0xEA15916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_INFO,
-+ .ir_code = 0xEF10916E
-+ },
-+ { /* Like */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F3,
-+ .ir_code = 0xEE11916E
-+ },
-+ { /* Dislike */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F4,
-+ .ir_code = 0xEB14916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_POWER,
-+ .ir_code = 0xFD02916E
-+ },
-+};
-+
-+static struct ubicom32hid_platform_data ip5170dpf_ubicom32hid_platform_data = {
-+ .gpio_reset = GPIO_RA_4,
-+ .gpio_reset_polarity = 0,
-+ .type = UBICOM32HID_BL_TYPE_BINARY,
-+ .invert = 0,
-+ .default_intensity = 1,
-+ .buttons = ip5170dpf_ubicom32hid_buttons,
-+ .nbuttons = ARRAY_SIZE(ip5170dpf_ubicom32hid_buttons),
-+ .ircodes = ip5170dpf_ubicom32hid_ircodes,
-+ .nircodes = ARRAY_SIZE(ip5170dpf_ubicom32hid_ircodes),
-+};
-+
-+/*
-+ * Devices on the I2C bus
-+ */
-+static struct i2c_board_info __initdata ip5170dpf_i2c_board_info[] = {
-+ /*
-+ * U24, ubicom32hid
-+ */
-+ {
-+ .type = "ubicom32hid",
-+ .addr = 0x08,
-+ .platform_data = &ip5170dpf_ubicom32hid_platform_data,
-+ },
-+
-+ /*
-+ * U14, CS4350 DAC, address 0x4B
-+ */
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PF13, SCL PF14
-+ */
-+static struct i2c_gpio_platform_data ip5170dpf_i2c_data = {
-+ .sda_pin = GPIO_RF_13,
-+ .scl_pin = GPIO_RF_14,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .scl_is_output_only = 1,
-+ .udelay = 5,
-+};
-+
-+static struct platform_device ip5170dpf_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip5170dpf_i2c_data,
-+ },
-+};
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip5170dpf_devices[] __initdata = {
-+ &ip5170dpf_i2c_device,
-+ &ip5170dpf_gpio_leds_device,
-+};
-+
-+/*
-+ * ip5170dpf_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip5170dpf_init(void)
-+{
-+ ubi_gpio_init();
-+
-+ vdc_tio_init();
-+
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip5170dpf_devices, ARRAY_SIZE(ip5170dpf_devices));
-+
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip5170dpf_i2c_board_info, ARRAY_SIZE(ip5170dpf_i2c_board_info));
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip5170dpf_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip5k/Kconfig linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/Kconfig
---- linux-2.6.30.10/arch/ubicom32/mach-ip5k/Kconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/Kconfig 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,28 @@
-+
-+config IP5170DPF
-+ bool "IP5170DPF"
-+ select UBICOM32_V3
-+ select I2C
-+ select I2C_GPIO
-+ select FB
-+ select FB_UBICOM32
-+ select BACKLIGHT_LCD_SUPPORT
-+ select BACKLIGHT_CLASS_DEVICE
-+ select UBICOM_HID
-+ select NEW_LEDS
-+ select LEDS_CLASS
-+ select LEDS_GPIO
-+ help
-+ IP5170 Digital Picture Frame board, 8005-1113, IP5K-BEV-0011-13 v1.3
-+
-+config IP5160DEV
-+ bool "IP5160Dev_Ver1Dot1"
-+ select UBICOM32_V3
-+ help
-+ Ubicom StreamEngine 5000 Development Board, IP5K-BDV-0004-11 v1.1
-+
-+config IP5160EVAL
-+ bool "IP5160RGWEval_Ver2Rev2"
-+ select UBICOM32_V3
-+ help
-+ Ubicom StreamEngine 5000 RGW Evaluation Board, IP5K-RGW-0004-11 v2.2
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip5k/Makefile linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/Makefile
---- linux-2.6.30.10/arch/ubicom32/mach-ip5k/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip5k/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,31 @@
-+#
-+# arch/ubicom32/mach-ip5k/Makefile
-+# Makefile for boards which have an ip5k on them.
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+obj-$(CONFIG_IP5170DPF) += board-ip5170dpf.o
-+obj-$(CONFIG_IP5160DEV) += board-ip5160dev.o
-+obj-$(CONFIG_IP5160EVAL) += board-ip5160rgw.o
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7145dpf.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7145dpf.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7145dpf.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7145dpf.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,715 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7145dpf.c
-+ * Board file for IP7145DPF, rev 1.0, P/N 8007-0410
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#include <linux/input.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/i2c/pca953x.h>
-+
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ubicom32input.h>
-+#include <asm/ubicom32input_i2c.h>
-+#include <asm/ubicom32bl.h>
-+#include <asm/ubicom32lcdpower.h>
-+#include <asm/vdc_tio.h>
-+
-+#include <asm/ubicom32sd.h>
-+#include <asm/sd_tio.h>
-+#include <asm/devtree.h>
-+#include <asm/audio.h>
-+
-+#include <asm/ring_tio.h>
-+
-+/******************************************************************************
-+ * SD/IO Port F (Slot 1) platform data
-+ */
-+static struct resource ip7145dpf_portf_sd_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct ubicom32sd_card ip7145dpf_portf_sd_cards[] = {
-+ [0] = {
-+ .pin_wp = IP7145DPF_IOB0,
-+ .wp_polarity = 1,
-+ .pin_pwr = IP7145DPF_IOB4,
-+ .pin_cd = GPIO_RA_4,
-+ },
-+ [1] = {
-+ .pin_wp = IP7145DPF_IOB1,
-+ .wp_polarity = 1,
-+ .pin_pwr = IP7145DPF_IOB5,
-+ .pin_cd = GPIO_RA_6,
-+ },
-+};
-+
-+static struct ubicom32sd_platform_data ip7145dpf_portf_sd_platform_data = {
-+ .ncards = 2,
-+ .cards = ip7145dpf_portf_sd_cards,
-+};
-+
-+static struct platform_device ip7145dpf_portf_sd_device = {
-+ .name = "ubicom32sd",
-+ .id = 0,
-+ .resource = ip7145dpf_portf_sd_resources,
-+ .num_resources = ARRAY_SIZE(ip7145dpf_portf_sd_resources),
-+ .dev = {
-+ .platform_data = &ip7145dpf_portf_sd_platform_data,
-+ },
-+
-+};
-+
-+/*
-+ * ip7145dpf_portf_sd_init
-+ */
-+static void ip7145dpf_portf_sd_init(void)
-+{
-+ /*
-+ * Check the device tree for the sd_tio
-+ */
-+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
-+ if (!sd_node) {
-+ printk(KERN_INFO "PortF SDTIO not found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ ip7145dpf_portf_sd_resources[0].start = sd_node->dn.sendirq;
-+ ip7145dpf_portf_sd_resources[1].start = sd_node->dn.recvirq;
-+ ip7145dpf_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
-+ ip7145dpf_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-+
-+ platform_device_register(&ip7145dpf_portf_sd_device);
-+}
-+
-+/******************************************************************************
-+ * SD/IO Port B (Slot 2) platform data
-+ */
-+static struct resource ip7145dpf_portb_sd_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct ubicom32sd_card ip7145dpf_portb_sd_cards[] = {
-+ [0] = {
-+ .pin_wp = IP7145DPF_IOB2,
-+ .wp_polarity = 1,
-+ .pin_pwr = IP7145DPF_IOB6,
-+ .pin_cd = IP7145DPF_IOB3,
-+ },
-+};
-+
-+static struct ubicom32sd_platform_data ip7145dpf_portb_sd_platform_data = {
-+ .ncards = 1,
-+ .cards = ip7145dpf_portb_sd_cards,
-+};
-+
-+static struct platform_device ip7145dpf_portb_sd_device = {
-+ .name = "ubicom32sd",
-+ .id = 1,
-+ .resource = ip7145dpf_portb_sd_resources,
-+ .num_resources = ARRAY_SIZE(ip7145dpf_portb_sd_resources),
-+ .dev = {
-+ .platform_data = &ip7145dpf_portb_sd_platform_data,
-+ },
-+
-+};
-+
-+/*
-+ * ip7145dpf_portb_sd_init
-+ */
-+static void ip7145dpf_portb_sd_init(void)
-+{
-+ /*
-+ * Check the device tree for the sd_tio
-+ */
-+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
-+ if (!sd_node) {
-+ printk(KERN_INFO "PortB SDTIO not found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ ip7145dpf_portb_sd_resources[0].start = sd_node->dn.sendirq;
-+ ip7145dpf_portb_sd_resources[1].start = sd_node->dn.recvirq;
-+ ip7145dpf_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
-+ ip7145dpf_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-+
-+ platform_device_register(&ip7145dpf_portb_sd_device);
-+}
-+
-+
-+#ifdef IP7145DPF_USE_MMC_SPI
-+/******************************************************************************
-+ * SPI over GPIO (MMC_SPI)
-+ */
-+#include <linux/spi/spi.h>
-+#include <linux/spi/mmc_spi.h>
-+#include <linux/mmc/host.h>
-+#include <asm/ubicom32-spi-gpio.h>
-+
-+#define MMC_CS GPIO_RF_5 // PF5 D3
-+#define MMC_CD GPIO_RA_4 // PA4 CD
-+#define MMC_WP IP7145DPF_IOB0 // IOB0 WP
-+#define MMC_PWR IP7145DPF_IOB4 // IOB4 PWR
-+
-+/*
-+ * SPI bus over GPIO (for SD card)
-+ */
-+static struct ubicom32_spi_gpio_platform_data ip7145dpf_spi_gpio_data = {
-+ .pin_mosi = GPIO_RF_0, // PF0 CMD
-+ .pin_miso = GPIO_RF_2, // PF2 D0
-+ .pin_clk = GPIO_RF_1, // PF1 CLK
-+ .bus_num = 0, // We'll call this SPI bus 0
-+ .num_chipselect = 1, // only one device on this SPI bus
-+};
-+
-+static struct platform_device ip7145dpf_spi_gpio_device = {
-+ .name = "ubicom32-spi-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7145dpf_spi_gpio_data,
-+ },
-+};
-+
-+/*
-+ * ip7145dpf_mmc_spi_setpower_slot_a
-+ * Set the power state for slot A
-+ */
-+static void ip7145dpf_mmc_spi_setpower_slot_a(struct device *dev, unsigned int vdd)
-+{
-+ struct mmc_spi_platform_data *pd = dev->platform_data;
-+
-+ /*
-+ * Power is inverted, we could tell the IOB to do it, but it's cleaner this way.
-+ */
-+ if ((1 << vdd) & pd->ocr_mask) {
-+ gpio_set_value(MMC_PWR, 0);
-+ return;
-+ }
-+ gpio_set_value(MMC_PWR, 1);
-+}
-+
-+/*
-+ * ip7145dpf_mmc_spi_get_cd_slot_a
-+ * Get the CD bit for slot A
-+ */
-+static int ip7145dpf_mmc_spi_get_cd_slot_a(struct device *dev)
-+{
-+ /*
-+ * Note that the sense of the GPIO is inverted
-+ */
-+ return !gpio_get_value(MMC_CD);
-+}
-+
-+/*
-+ * ip7145dpf_mmc_spi_get_ro_slot_a
-+ * Get the WP bit for slot A
-+ */
-+static int ip7145dpf_mmc_spi_get_ro_slot_a(struct device *dev)
-+{
-+ /*
-+ * Note that the sense of the GPIO is inverted, we could tell the IOB to do it, but
-+ * it's clearer this way.
-+ */
-+ return !gpio_get_value(MMC_WP);
-+}
-+
-+/*
-+ * ip7145dpf_mmc_spi_exit_slot_a
-+ * Free the appropriate GPIOs for slot A SD slot.
-+ */
-+static void ip7145dpf_mmc_spi_exit_slot_a(struct device *dev, void *appdata)
-+{
-+ gpio_free(MMC_CD);
-+ gpio_free(MMC_CS);
-+ gpio_free(MMC_WP);
-+ gpio_free(MMC_PWR);
-+ platform_device_unregister(&ip7145dpf_spi_gpio_device);
-+}
-+
-+/*
-+ * ip7145dpf_mmc_spi_init_slot_a
-+ * Allocate the appropriate GPIOs for slot A SD slot.
-+ * WP is on IOB0, CD is PA4, CS is on PF5
-+ * TODO: make CD an interrupt
-+ */
-+static int ip7145dpf_mmc_spi_init_slot_a(void)
-+{
-+ int ret = gpio_request(MMC_CD, "mmc-a-cd");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request mmc-a-cd pin\n", __FUNCTION__);
-+ return -ENOSYS;
-+ }
-+ gpio_direction_input(MMC_CD);
-+
-+ ret = gpio_request(MMC_CS, "mmc-a-cs");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request mmc-a-cs pin\n", __FUNCTION__);
-+ goto no_cs;
-+ }
-+ gpio_direction_output(MMC_CS, 0);
-+
-+ ret = gpio_request(MMC_WP, "mmc-a-wp");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request mmc-a-wp pin\n", __FUNCTION__);
-+ goto no_wp;
-+ }
-+ gpio_direction_input(MMC_WP);
-+
-+ /*
-+ * Start off with power off
-+ */
-+ ret = gpio_request(MMC_PWR, "mmc-a-pwr");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request mmc-a-pwr pin\n", __FUNCTION__);
-+ goto no_pwr;
-+ }
-+ ret = gpio_direction_output(MMC_PWR, 1);
-+
-+ return 0;
-+
-+no_pwr:
-+ gpio_free(MMC_WP);
-+
-+no_wp:
-+ gpio_free(MMC_CS);
-+
-+no_cs:
-+ gpio_free(MMC_CD);
-+ return -ENOSYS;
-+}
-+
-+/*
-+ * MMC_SPI driver (currently bitbang)
-+ */
-+static struct mmc_spi_platform_data ip7145dpf_mmc_platform_data = {
-+ .ocr_mask = MMC_VDD_33_34,
-+ .exit = ip7145dpf_mmc_spi_exit_slot_a,
-+ .get_ro = ip7145dpf_mmc_spi_get_ro_slot_a,
-+ .get_cd = ip7145dpf_mmc_spi_get_cd_slot_a,
-+
-+ .setpower = ip7145dpf_mmc_spi_setpower_slot_a,
-+ .powerup_msecs = 500,
-+
-+ .detect_delay = 100,
-+
-+ .caps = MMC_CAP_NEEDS_POLL,
-+};
-+
-+static struct ubicom32_spi_gpio_controller_data ip7145dpf_mmc_controller_data = {
-+ .pin_cs = MMC_CS,
-+};
-+
-+static struct spi_board_info ip7145dpf_spi_board_info[] = {
-+ {
-+ .modalias = "mmc_spi",
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .max_speed_hz = 2000000,
-+ .platform_data = &ip7145dpf_mmc_platform_data,
-+ .controller_data = &ip7145dpf_mmc_controller_data,
-+ }
-+};
-+#endif /* IP7145DPF_USE_MMC_SPI */
-+
-+/*
-+ * ip7145dpf_u72_setup
-+ * Called by I2C to tell us that u72 is setup.
-+ *
-+ * This function is called by I2C to tell us that u72 has been setup. All
-+ * devices which rely on this chip being initialized (or even present) need to
-+ * be initialized in this function otherwise they may get initialized too early.
-+ *
-+ * Currently the only device depending on u72 is the SPI
-+ */
-+static int __init ip7145dpf_u72_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context)
-+{
-+#ifdef IP7145DPF_USE_MMC_SPI
-+ if (ip7145dpf_mmc_spi_init_slot_a()) {
-+ printk(KERN_ERR "%s: could not request mmc resources\n", __FUNCTION__);
-+ } else {
-+ printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__);
-+ spi_register_board_info(ip7145dpf_spi_board_info, ARRAY_SIZE(ip7145dpf_spi_board_info));
-+ platform_device_register(&ip7145dpf_spi_gpio_device);
-+ }
-+#else
-+ /*
-+ * Initialize the Port F/Port B SD slots
-+ */
-+ ip7145dpf_portf_sd_init();
-+ ip7145dpf_portb_sd_init();
-+#endif
-+ return 0;
-+}
-+
-+/******************************************************************************
-+ * LCD VGH on the board at PE6
-+ */
-+static struct ubicom32lcdpower_platform_data ip7145dpf_lcdpower_data = {
-+ .vgh_gpio = GPIO_RE_6,
-+ .vgh_polarity = true,
-+};
-+
-+static struct platform_device ip7145dpf_lcdpower_device = {
-+ .name = "ubicom32lcdpower",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7145dpf_lcdpower_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Backlight on the board PD0, hardware PWM
-+ */
-+static struct ubicom32bl_platform_data ip7145dpf_backlight_data = {
-+ .type = UBICOM32BL_TYPE_PWM,
-+ .pwm_channel = 2,
-+ .pwm_prescale = 15,
-+ .pwm_period = 60,
-+ .default_intensity = 0x80,
-+};
-+
-+static struct platform_device ip7145dpf_backlight_device = {
-+ .name = "ubicom32bl",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7145dpf_backlight_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Ubicom32Input on I2C, U48 MAX7310, address 0x18, 8 bits
-+ */
-+static struct ubicom32input_i2c_button ip7145dpf_ubicom32input_i2c_u48_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_UP,
-+ .bit = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_LEFT,
-+ .bit = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_RIGHT,
-+ .bit = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_DOWN,
-+ .bit = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ENTER,
-+ .bit = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MENU,
-+ .bit = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ESC,
-+ .bit = 6,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct ubicom32input_i2c_platform_data ip7145dpf_ubicom32input_i2c_u48_platform_data = {
-+ .buttons = ip7145dpf_ubicom32input_i2c_u48_buttons,
-+ .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_i2c_u48_buttons),
-+ .name = "Ubicom32 Input I2C U48",
-+};
-+
-+/******************************************************************************
-+ * Additional GPIO chips
-+ */
-+static struct pca953x_platform_data ip7145dpf_gpio_u72_platform_data = {
-+ .gpio_base = IP7145DPF_U72_BASE,
-+ .setup = ip7145dpf_u72_setup,
-+};
-+
-+/******************************************************************************
-+ * Devices on the I2C bus
-+ */
-+static struct i2c_board_info __initdata ip7145dpf_i2c_board_info[] = {
-+ /*
-+ * U51, S35390A RTC, address 0x30
-+ */
-+ {
-+ .type = "s35390a",
-+ .addr = 0x30,
-+ },
-+
-+ /*
-+ * U48, MAX7310 IO expander, 8 bits, address 0x18
-+ */
-+ {
-+ .type = "ubicom32in_max7310",
-+ .addr = 0x18,
-+ .platform_data = &ip7145dpf_ubicom32input_i2c_u48_platform_data,
-+ },
-+
-+ /*
-+ * U72, MAX7310 IOB expander, 8 bits, address 0x19
-+ */
-+ {
-+ .type = "max7310",
-+ .addr = 0x19,
-+ .platform_data = &ip7145dpf_gpio_u72_platform_data,
-+ },
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PE1, SCL PE2
-+ */
-+static struct i2c_gpio_platform_data ip7145dpf_i2c_data = {
-+ .sda_pin = GPIO_RE_1,
-+ .scl_pin = GPIO_RE_2,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device ip7145dpf_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7145dpf_i2c_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Use ubicom32input driver to monitor the various pushbuttons on this board.
-+ *
-+ * WPS PF12
-+ * FACT_DEFAULT PF13
-+ * POWER PE4
-+ *
-+ * Not sutable for the keypad buttons since those run on I2C GPIO. The polling
-+ * of ubicom32input would seem to be excessive for this.
-+ *
-+ * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
-+ */
-+static struct ubicom32input_button ip7145dpf_ubicom32input_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_FN_F1,
-+ .gpio = GPIO_RF_12,
-+ .desc = "WPS",
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_FN_F2,
-+ .gpio = GPIO_RF_13,
-+ .desc = "Factory Default",
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_POWER,
-+ .gpio = GPIO_RE_4,
-+ .desc = "Power",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct ubicom32input_platform_data ip7145dpf_ubicom32input_data = {
-+ .buttons = ip7145dpf_ubicom32input_buttons,
-+ .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_buttons),
-+};
-+
-+static struct platform_device ip7145dpf_ubicom32input_device = {
-+ .name = "ubicom32input",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7145dpf_ubicom32input_data,
-+ },
-+};
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip7145dpf_devices[] __initdata = {
-+ &ip7145dpf_i2c_device,
-+ &ip7145dpf_lcdpower_device,
-+ &ip7145dpf_backlight_device,
-+ &ip7145dpf_ubicom32input_device,
-+};
-+
-+/*
-+ * ip7145dpf_power_off
-+ * Called to turn the power off for this board
-+ */
-+static void ip7145dpf_power_off(void)
-+{
-+ gpio_set_value(GPIO_RE_5, 0);
-+}
-+
-+/*
-+ * ip7145dpf_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7145dpf_init(void)
-+{
-+ int ret;
-+ struct platform_device *audio_dev;
-+
-+ ubi_gpio_init();
-+
-+#ifdef CONFIG_UIO_UBICOM32RING
-+ ring_tio_init("decoder_ring");
-+#endif
-+
-+ /*
-+ * Start up the video driver first
-+ */
-+ vdc_tio_init();
-+
-+ /*
-+ * Take over holding of the power from the system
-+ */
-+ ret = gpio_request(GPIO_RE_5, "power_hold");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request power hold GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RE_5, 1);
-+ mach_power_off = ip7145dpf_power_off;
-+
-+ /*
-+ * USB SEL_HOST_USB line
-+ */
-+ ret = gpio_request(GPIO_RF_11, "SEL_HOST_USB");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RF_11, 0);
-+
-+ /*
-+ * Setup audio
-+ */
-+ audio_dev = audio_device_alloc("snd-ubi32-generic", "audio", "audio-i2sout", 0);
-+ if (audio_dev) {
-+ platform_device_register(audio_dev);
-+ }
-+
-+ /*
-+ * Register all of the devices we have on this board
-+ */
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip7145dpf_devices, ARRAY_SIZE(ip7145dpf_devices));
-+
-+ /*
-+ * Register all of the devices which sit on the I2C bus
-+ */
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7145dpf_i2c_board_info, ARRAY_SIZE(ip7145dpf_i2c_board_info));
-+
-+ /*
-+ * We have to initialize the SPI after the I2C IOB gets setup. SPI is initialized in
-+ * ip7145dpf_u72_setup
-+ */
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7145dpf_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7160bringup.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7160bringup.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7160bringup.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7160bringup.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7160bringup.c
-+ * Support for the IP7160 bringup board.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <linux/leds.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ubicom32input.h>
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+#include <asm/ubicom32suart.h>
-+#endif
-+
-+/*
-+ * Use ubicom32input driver to monitor the various pushbuttons on this board.
-+ *
-+ * WPS PD5
-+ * FACT_DEFAULT PD6
-+ *
-+ * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
-+ */
-+static struct ubicom32input_button ip7160bringup_ubicom32input_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_FN_F1,
-+ .gpio = GPIO_RD_5,
-+ .desc = "WPS",
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_FN_F2,
-+ .gpio = GPIO_RD_6,
-+ .desc = "Factory Default",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct ubicom32input_platform_data ip7160bringup_ubicom32input_data = {
-+ .buttons = ip7160bringup_ubicom32input_buttons,
-+ .nbuttons = ARRAY_SIZE(ip7160bringup_ubicom32input_buttons),
-+};
-+
-+static struct platform_device ip7160bringup_ubicom32input_device = {
-+ .name = "ubicom32input",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7160bringup_ubicom32input_data,
-+ },
-+};
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+static struct resource ip7160bringup_ubicom32_suart_resources[] = {
-+ {
-+ .start = RE,
-+ .end = RE,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = PORT_OTHER_INT(RE),
-+ .end = PORT_OTHER_INT(RE),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = 250000000,
-+ .end = 250000000,
-+ .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
-+ },
-+};
-+
-+static struct platform_device ip7160bringup_ubicom32_suart_device = {
-+ .name = "ubicom32suart",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(ip7160bringup_ubicom32_suart_resources),
-+ .resource = ip7160bringup_ubicom32_suart_resources,
-+};
-+#endif
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip7160bringup_devices[] __initdata = {
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+ &ip7160bringup_ubicom32_suart_device,
-+#endif
-+ &ip7160bringup_ubicom32input_device,
-+};
-+
-+/*
-+ * ip7160bringup_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7160bringup_init(void)
-+{
-+ board_init();
-+
-+ ubi_gpio_init();
-+
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip7160bringup_devices, ARRAY_SIZE(ip7160bringup_devices));
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7160bringup_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7160dpf.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7160dpf.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7160dpf.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7160dpf.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,326 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7160dpf.c
-+ * Platform initialization for ip7160dpf board.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+
-+#include <linux/input.h>
-+
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ubicom32hid.h>
-+#include <asm/vdc_tio.h>
-+#include <asm/audio.h>
-+
-+/*
-+ * Backlight on the board PD0, hardware PWM
-+ */
-+static const struct ubicom32hid_button ip7160dpf_ubicom32hid_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_UP,
-+ .bit = 0,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_LEFT,
-+ .bit = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_RIGHT,
-+ .bit = 2,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_DOWN,
-+ .bit = 3,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ENTER,
-+ .bit = 4,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MENU,
-+ .bit = 5,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ESC,
-+ .bit = 7,
-+ },
-+};
-+
-+static const struct ubicom32hid_ir ip7160dpf_ubicom32hid_ircodes[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_UP,
-+ .ir_code = 0xF807916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_DOWN,
-+ .ir_code = 0xF20D916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_LEFT,
-+ .ir_code = 0xF609916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_RIGHT,
-+ .ir_code = 0xF40B916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ENTER,
-+ .ir_code = 0xF50A916E
-+ },
-+ { /* rotate */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F1,
-+ .ir_code = 0xF906916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MENU,
-+ .ir_code = 0xF708916E
-+ },
-+ { /* font size */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F2,
-+ .ir_code = 0xF30C916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ESC,
-+ .ir_code = 0xF10E916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_VOLUMEUP,
-+ .ir_code = 0xF00F916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_VOLUMEDOWN,
-+ .ir_code = 0xED12916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MUTE,
-+ .ir_code = 0xEA15916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_INFO,
-+ .ir_code = 0xEF10916E
-+ },
-+ { /* Like */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F3,
-+ .ir_code = 0xEE11916E
-+ },
-+ { /* Dislike */
-+ .type = EV_KEY,
-+ .code = KEY_FN_F4,
-+ .ir_code = 0xEB14916E
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_POWER,
-+ .ir_code = 0xFD02916E
-+ },
-+};
-+
-+static struct ubicom32hid_platform_data ip7160dpf_ubicom32hid_platform_data = {
-+ .gpio_reset = GPIO_RI_5,
-+ .gpio_reset_polarity = 0,
-+ .type = UBICOM32HID_BL_TYPE_PWM,
-+ .invert = 0,
-+ .default_intensity = 128,
-+ .buttons = ip7160dpf_ubicom32hid_buttons,
-+ .nbuttons = ARRAY_SIZE(ip7160dpf_ubicom32hid_buttons),
-+ .ircodes = ip7160dpf_ubicom32hid_ircodes,
-+ .nircodes = ARRAY_SIZE(ip7160dpf_ubicom32hid_ircodes),
-+};
-+
-+/*
-+ * Devices on the I2C bus
-+ * This board has a "bus 2" which is isolated from the main bus by U47
-+ * and pin RI0. It should be safe to always enable bus 2 by setting
-+ * RI0 to low, however, it should be noted that on all existing configurations
-+ * of this board, U49 and U51 are not populated.
-+ */
-+static struct i2c_board_info __initdata ip7160dpf_i2c_board_info[] = {
-+ /*
-+ * U37, CS4350 DAC, address 0x4B, bus 2
-+ * THIS ENTRY MUST BE FIRST
-+ */
-+ {
-+ .type = "cs4350",
-+ .addr = 0x4B,
-+ }
-+
-+ /*
-+ * U24, ubicom32hid
-+ */
-+ {
-+ .type = "ubicom32hid",
-+ .addr = 0x08,
-+ .platform_data = &ip7160dpf_ubicom32hid_platform_data,
-+ },
-+
-+ /*
-+ * U49, ISL29001 Ambient Light Sensor, address 0x44, bus 2 (may not be stuffed)
-+ */
-+
-+ /*
-+ * U51, S35390A RTC, address 0x30, bus 2 (may not be stuffed)
-+ */
-+#ifdef CONFIG_RTC_DRV_S35390A
-+ {
-+ .type = "s35390a",
-+ .addr = 0x30,
-+ },
-+#endif
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PI1, SCL PI2
-+ */
-+static struct i2c_gpio_platform_data ip7160dpf_i2c_data = {
-+ .sda_pin = GPIO_RI_1,
-+ .scl_pin = GPIO_RI_2,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .scl_is_output_only = 1,
-+ .udelay = 6,
-+};
-+
-+static struct platform_device ip7160dpf_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7160dpf_i2c_data,
-+ },
-+};
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip7160dpf_devices[] __initdata = {
-+ &ip7160dpf_i2c_device,
-+};
-+
-+/*
-+ * ip7160dpf_power_off
-+ * Called to turn the power off for this board
-+ */
-+static void ip7160dpf_power_off(void)
-+{
-+ gpio_set_value(GPIO_RF_14, 0);
-+}
-+
-+/*
-+ * ip7160dpf_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7160dpf_init(void)
-+{
-+ int ret;
-+ struct platform_device *audio_dev;
-+
-+ ubi_gpio_init();
-+
-+ /*
-+ * Hold the POWER_HOLD line
-+ */
-+ ret = gpio_request(GPIO_RF_14, "POWER_HOLD");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RF_14, 1);
-+ mach_power_off = ip7160dpf_power_off;
-+
-+ /*
-+ * USB SEL_HOST_USB line
-+ */
-+ ret = gpio_request(GPIO_RI_13, "SEL_HOST_USB");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RI_13, 0);
-+
-+ /*
-+ * USB/DAC nRESET line
-+ */
-+ ret = gpio_request(GPIO_RI_3, "USB_DAC_nRESET");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request USB_DAC_nRESET GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RI_3, 0);
-+ udelay(1);
-+ gpio_direction_output(GPIO_RI_3, 1);
-+
-+ /*
-+ * I2C BUS2 Disable line
-+ */
-+ ret = gpio_request(GPIO_RI_0, "DISABLE_BUS2");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request DISABLE_BUS2 GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RI_0, 0);
-+
-+ vdc_tio_init();
-+
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip7160dpf_devices, ARRAY_SIZE(ip7160dpf_devices));
-+
-+ /*
-+ * Allocate the audio driver if we can
-+ */
-+ audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio-i2sout", 0);
-+ if (audio_dev) {
-+ ip7160dpf_i2c_board_info[0].platform_data = audio_dev;
-+ }
-+
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7160dpf_i2c_board_info, ARRAY_SIZE(ip7160dpf_i2c_board_info));
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7160dpf_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7160rgw.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7160rgw.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7160rgw.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7160rgw.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,355 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7160rgw.c
-+ * Platform initialization for ip7160rgw board.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <linux/leds.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ubicom32input.h>
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+#include <asm/ubicom32suart.h>
-+#endif
-+
-+#include <asm/ubicom32-spi-gpio.h>
-+#include <asm/switch-dev.h>
-+
-+#ifdef CONFIG_IP7160RGWLCD
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+/*
-+ * LCD Adapter board 8007-092x support
-+ *
-+ * Touch controller
-+ *
-+ * Connected via I2C bus, interrupt on PA6
-+ */
-+#include <linux/i2c/tsc2007.h>
-+
-+/*
-+ * ip7160rgwlcd_tsc2007_exit_platform_hw
-+ */
-+static void ip7160rgwlcd_tsc2007_exit_platform_hw(void)
-+{
-+ UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 17);
-+ gpio_free(GPIO_RA_5);
-+}
-+
-+/*
-+ * ip7160rgwlcd_tsc2007_init_platform_hw
-+ */
-+static int ip7160rgwlcd_tsc2007_init_platform_hw(void)
-+{
-+ int res = gpio_request(GPIO_RA_5, "TSC2007_IRQ");
-+ if (res) {
-+ return res;
-+ }
-+
-+ UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 17);
-+ UBICOM32_IO_PORT(RA)->ctl0 |= (0x02 << 17);
-+ return 0;
-+}
-+
-+/*
-+ * ip7160rgwlcd_tsc2007_get_pendown_state
-+ */
-+static int ip7160rgwlcd_tsc2007_get_pendown_state(void)
-+{
-+ return !gpio_get_value(GPIO_RA_5);
-+}
-+
-+static struct tsc2007_platform_data ip7160rgwlcd_tsc2007_data = {
-+ .model = 2007,
-+ .x_plate_ohms = 350,
-+ .get_pendown_state = ip7160rgwlcd_tsc2007_get_pendown_state,
-+ .init_platform_hw = ip7160rgwlcd_tsc2007_init_platform_hw,
-+ .exit_platform_hw = ip7160rgwlcd_tsc2007_exit_platform_hw,
-+};
-+
-+/******************************************************************************
-+ * I2C bus on the board, SDA PI14, SCL PI13
-+ */
-+static struct i2c_gpio_platform_data ip7160rgwlcd_i2c_data = {
-+ .sda_pin = GPIO_RI_14,
-+ .scl_pin = GPIO_RI_13,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .udelay = 50,
-+};
-+
-+static struct platform_device ip7160rgwlcd_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7160rgwlcd_i2c_data,
-+ },
-+};
-+
-+static struct i2c_board_info __initdata ip7160rgwlcd_i2c_board_info[] = {
-+ {
-+ .type = "tsc2007",
-+ .addr = 0x48,
-+ .irq = 45, // RA5
-+ .platform_data = &ip7160rgwlcd_tsc2007_data,
-+ },
-+};
-+
-+#endif
-+
-+/*
-+ * SPI bus over GPIO for Gigabit Ethernet Switch
-+ * U58:
-+ * MOSI PE0
-+ * MISO PE1
-+ * CLK PE3
-+ * CS PE2
-+ */
-+static struct ubicom32_spi_gpio_platform_data ip7160rgw_spi_gpio_data = {
-+ .pin_mosi = GPIO_RE_0,
-+ .pin_miso = GPIO_RE_1,
-+ .pin_clk = GPIO_RE_3,
-+ .bus_num = 0, // We'll call this SPI bus 0
-+ .num_chipselect = 1, // only one device on this SPI bus
-+ .clk_default = 1,
-+};
-+
-+static struct platform_device ip7160rgw_spi_gpio_device = {
-+ .name = "ubicom32-spi-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7160rgw_spi_gpio_data,
-+ },
-+};
-+
-+static struct ubicom32_spi_gpio_controller_data ip7160rgw_bcm539x_controller_data = {
-+ .pin_cs = GPIO_RE_2,
-+};
-+
-+static struct switch_core_platform_data ip7160rgw_bcm539x_platform_data = {
-+ .flags = SWITCH_DEV_FLAG_HW_RESET,
-+ .pin_reset = GPIO_RE_4,
-+ .name = "bcm539x",
-+};
-+
-+static struct spi_board_info ip7160rgw_spi_board_info[] = {
-+ {
-+ .modalias = "bcm539x-spi",
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .max_speed_hz = 2000000,
-+ .platform_data = &ip7160rgw_bcm539x_platform_data,
-+ .controller_data = &ip7160rgw_bcm539x_controller_data,
-+ .mode = SPI_MODE_3,
-+ }
-+};
-+
-+/*
-+ * LEDs
-+ *
-+ * WLAN1 PD0 (PWM capable)
-+ * WLAN2 PD1
-+ * USB2.0 PD2
-+ * Status PD3
-+ * WPS PD4
-+ *
-+ * TODO: check triggers, are they generic?
-+ */
-+static struct gpio_led ip7160rgw_gpio_leds[] = {
-+ {
-+ .name = "d53:green:WLAN1",
-+ .default_trigger = "WLAN1",
-+ .gpio = GPIO_RD_0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "d54:green:WLAN2",
-+ .default_trigger = "WLAN2",
-+ .gpio = GPIO_RD_1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "d55:green:USB",
-+ .default_trigger = "USB",
-+ .gpio = GPIO_RD_2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "d56:green:Status",
-+ .default_trigger = "Status",
-+ .gpio = GPIO_RD_3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "d57:green:WPS",
-+ .default_trigger = "WPS",
-+ .gpio = GPIO_RD_4,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data ip7160rgw_gpio_led_platform_data = {
-+ .num_leds = 5,
-+ .leds = ip7160rgw_gpio_leds,
-+};
-+
-+static struct platform_device ip7160rgw_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7160rgw_gpio_led_platform_data,
-+ },
-+};
-+
-+/*
-+ * Use ubicom32input driver to monitor the various pushbuttons on this board.
-+ *
-+ * WPS PD5
-+ * FACT_DEFAULT PD6
-+ *
-+ * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
-+ */
-+static struct ubicom32input_button ip7160rgw_ubicom32input_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_FN_F1,
-+ .gpio = GPIO_RD_5,
-+ .desc = "WPS",
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_FN_F2,
-+ .gpio = GPIO_RD_6,
-+ .desc = "Factory Default",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct ubicom32input_platform_data ip7160rgw_ubicom32input_data = {
-+ .buttons = ip7160rgw_ubicom32input_buttons,
-+ .nbuttons = ARRAY_SIZE(ip7160rgw_ubicom32input_buttons),
-+};
-+
-+static struct platform_device ip7160rgw_ubicom32input_device = {
-+ .name = "ubicom32input",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7160rgw_ubicom32input_data,
-+ },
-+};
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+static struct resource ip7160rgw_ubicom32_suart_resources[] = {
-+ {
-+ .start = RE,
-+ .end = RE,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = PORT_OTHER_INT(RE),
-+ .end = PORT_OTHER_INT(RE),
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = 250000000,
-+ .end = 250000000,
-+ .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
-+ },
-+};
-+
-+static struct platform_device ip7160rgw_ubicom32_suart_device = {
-+ .name = "ubicom32suart",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(ip7160rgw_ubicom32_suart_resources),
-+ .resource = ip7160rgw_ubicom32_suart_resources,
-+};
-+#endif
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip7160rgw_devices[] __initdata = {
-+#ifdef CONFIG_SERIAL_UBI32_SERDES
-+ &ip7160rgw_ubicom32_suart_device,
-+#endif
-+ &ip7160rgw_ubicom32input_device,
-+ &ip7160rgw_gpio_leds_device,
-+ &ip7160rgw_spi_gpio_device,
-+#ifdef CONFIG_IP7160RGWLCD
-+ &ip7160rgwlcd_i2c_device,
-+#endif
-+};
-+
-+/*
-+ * ip7160rgw_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7160rgw_init(void)
-+{
-+ board_init();
-+
-+ /*
-+ * Rev 1.2 boards have spi in a different place than 1.1/1.0
-+ */
-+ if (strcmp(board_get_revision(), "1.2") == 0) {
-+ ip7160rgw_spi_gpio_data.pin_mosi = GPIO_RD_7;
-+ }
-+
-+ ubi_gpio_init();
-+
-+ /*
-+ * Reserve switch SPI CS on behalf on switch driver
-+ */
-+ if (gpio_request(ip7160rgw_bcm539x_controller_data.pin_cs, "switch-bcm539x-cs")) {
-+ printk(KERN_WARNING "Could not request cs of switch SPI I/F\n");
-+ return -EIO;
-+ }
-+ gpio_direction_output(ip7160rgw_bcm539x_controller_data.pin_cs, 1);
-+
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip7160rgw_devices, ARRAY_SIZE(ip7160rgw_devices));
-+
-+ printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__);
-+ spi_register_board_info(ip7160rgw_spi_board_info, ARRAY_SIZE(ip7160rgw_spi_board_info));
-+
-+#ifdef CONFIG_IP7160RGWLCD
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7160rgwlcd_i2c_board_info, ARRAY_SIZE(ip7160rgwlcd_i2c_board_info));
-+ printk(KERN_INFO "IP7160 RGW + LCD\n");
-+#else
-+ printk(KERN_INFO "IP7160 RGW\n");
-+#endif
-+ return 0;
-+}
-+
-+arch_initcall(ip7160rgw_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500av.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500av.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500av.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500av.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,273 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7500av.c
-+ * Support for IP7500 Audio Video Board + CPU module board.
-+ *
-+ * This file supports the IP7500 Audio Video Board:
-+ * 8007-0810 Rev 1.0
-+ * with one of the following CPU module boards:
-+ * 8007-0510 Rev 1.0
-+ * 8007-0510A Rev 1.0 (with ethernet)
-+ *
-+ * DIP Switch SW2 configuration: (*) default
-+ * POS 1: on(*) = PCI enabled, off = PCI disabled
-+ * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12
-+ * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15
-+ * POS 4: unused
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/device.h>
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/delay.h>
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ring_tio.h>
-+#include <asm/vdc_tio.h>
-+#include <asm/audio.h>
-+#include <asm/ubi32-pcm.h>
-+#include <asm/ubi32-cs4384.h>
-+
-+/******************************************************************************
-+ * Devices on the I2C bus
-+ *
-+ * BEWARE of changing the order of things in this array as we depend on
-+ * certain things to be in certain places.
-+ */
-+static struct i2c_board_info __initdata ip7500av_i2c_board_info[] = {
-+ /*
-+ * U6, CS4384 DAC, address 0x19
-+ */
-+ {
-+ .type = "cs4384",
-+ .addr = 0x19,
-+ },
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PD1, SCL PD2
-+ */
-+static struct i2c_gpio_platform_data ip7500av_i2c_data = {
-+ .sda_pin = GPIO_RD_6,
-+ .scl_pin = GPIO_RD_3,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .udelay = 50,
-+};
-+
-+static struct platform_device ip7500av_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7500av_i2c_data,
-+ },
-+};
-+
-+/*
-+ * List of possible mclks we can generate. This depends on the CPU frequency.
-+ */
-+static struct ubi32_cs4384_mclk_entry ip7500av_cs4384_mclk_entries[] = {
-+ {
-+ .rate = 12288000,
-+ .div = 44,
-+ },
-+ {
-+ .rate = 11289600,
-+ .div = 48,
-+ },
-+};
-+
-+/*
-+ * List of all devices in our system
-+ */
-+static struct platform_device *ip7500av_devices[] __initdata = {
-+ &ip7500av_i2c_device,
-+};
-+
-+/*
-+ * ip7500av_vdac_write
-+ */
-+static int __init ip7500av_vdac_write(int reg, int val)
-+{
-+ struct i2c_adapter *adap;
-+ struct i2c_msg msg[1];
-+ unsigned char data[2];
-+ int err;
-+
-+ adap = i2c_get_adapter(0);
-+ if (!adap) {
-+ printk(KERN_WARNING "%s: failed to get i2c adapter\n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+ msg->addr = 0x2B;
-+ msg->flags = 0;
-+ msg->len = 2;
-+ msg->buf = data;
-+ data[0] = reg;
-+ data[1] = val;
-+ err = i2c_transfer(adap, msg, 1);
-+ i2c_put_adapter(adap);
-+ if (err >= 0) {
-+ return 0;
-+ }
-+ return err;
-+}
-+
-+/*
-+ * ip7500av_vdac_init
-+ * Initializes the video DAC via I2C
-+ *
-+ * Equivalent mode line: 720x480p = 27 Mhz, 720 736 800 858 480 484 492 525
-+ */
-+static int __init ip7500av_vdac_init(void)
-+{
-+ int err;
-+
-+ printk(KERN_INFO "Initializing ADV7393 DAC\n");
-+
-+ /*
-+ * Reset the VDAC
-+ */
-+ if (gpio_request(GPIO_RF_6, "VDAC Reset")) {
-+ printk(KERN_WARNING "%s: failed to allocate VDAC Reset\n", __FUNCTION__);
-+ return -EBUSY;
-+ }
-+ gpio_direction_output(GPIO_RF_6, 0);
-+ udelay(1);
-+ gpio_set_value(GPIO_RF_6, 1);
-+
-+ /*
-+ * See table 100 of ADV7393 data sheet: 16-bit 525p YCrCb In, YPbPr Out
-+ */
-+ err = ip7500av_vdac_write(0x17, 0x02);
-+ if (err) {
-+ printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
-+ return err;
-+ }
-+ err = ip7500av_vdac_write(0x00, 0x1c);
-+ if (err) {
-+ printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
-+ return err;
-+ }
-+ err = ip7500av_vdac_write(0x01, 0x10);
-+ if (err) {
-+ printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
-+ return err;
-+ }
-+ err = ip7500av_vdac_write(0x31, 0x01);
-+ if (err) {
-+ printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
-+ return err;
-+ }
-+#ifdef IP7500AV_VDAC_SWAP_PBPR
-+ err = ip7500av_vdac_write(0x35, 0x08);
-+ if (err) {
-+ printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
-+ return err;
-+ }
-+#endif
-+#ifdef IP7500AV_VDAC_FULL_RANGE
-+ err = ip7500av_vdac_write(0x30, 0x02);
-+ if (err) {
-+ printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__);
-+ return err;
-+ }
-+#endif
-+ return 0;
-+}
-+late_initcall(ip7500av_vdac_init);
-+
-+/*
-+ * ip7500av_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7500av_init(void)
-+{
-+ struct platform_device *audio_dev;
-+ struct platform_device *audio_dev2;
-+ struct ubi32_cs4384_platform_data *cs4384_pd;
-+
-+ board_init();
-+
-+ ubi_gpio_init();
-+
-+ vdc_tio_init();
-+
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_add_devices(ip7500av_devices, ARRAY_SIZE(ip7500av_devices));
-+
-+ /*
-+ * CS4384 DAC
-+ */
-+ audio_dev = audio_device_alloc("snd-ubi32-cs4384", "audio", "audio-i2sout",
-+ sizeof(struct ubi32_cs4384_platform_data));
-+ if (audio_dev) {
-+ /*
-+ * Attempt to figure out a good divisor. This will only work
-+ * assuming the core frequency is compatible.
-+ */
-+ int i;
-+ unsigned int freq = processor_frequency();
-+ for (i = 0; i < ARRAY_SIZE(ip7500av_cs4384_mclk_entries); i++) {
-+ unsigned int div;
-+ unsigned int rate = ip7500av_cs4384_mclk_entries[i].rate / 1000;
-+ div = ((freq / rate) + 500) / 1000;
-+ ip7500av_cs4384_mclk_entries[i].div = div;
-+ printk("CS4384 mclk %d rate %u000Hz div %u act %u\n", i, rate, div, freq / div);
-+ }
-+
-+ cs4384_pd = audio_device_priv(audio_dev);
-+ cs4384_pd->mclk_src = UBI32_CS4384_MCLK_PWM_0;
-+ cs4384_pd->n_mclk = ARRAY_SIZE(ip7500av_cs4384_mclk_entries);
-+ cs4384_pd->mclk_entries = ip7500av_cs4384_mclk_entries;
-+ ip7500av_i2c_board_info[0].platform_data = audio_dev;
-+
-+ /*
-+ * Reset the DAC
-+ */
-+ if (gpio_request(GPIO_RF_4, "DAC Reset") == 0) {
-+ gpio_direction_output(GPIO_RF_4, 0);
-+ udelay(1);
-+ gpio_direction_output(GPIO_RF_4, 1);
-+ } else {
-+ printk("Unable to request DAC reset GPIO\n");
-+ }
-+ }
-+
-+ /*
-+ * SPDIF port
-+ */
-+ audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
-+ if (audio_dev2) {
-+ platform_device_register(audio_dev2);
-+ }
-+
-+ /*
-+ * Register all of the devices which sit on the I2C bus
-+ */
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7500av_i2c_board_info, ARRAY_SIZE(ip7500av_i2c_board_info));
-+
-+ printk(KERN_INFO "IP7500 Audio/Video Board\n");
-+ return 0;
-+}
-+arch_initcall(ip7500av_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500iap.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500iap.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500iap.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500iap.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,414 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7500iap.c
-+ * Support for IP7500 Internet Audio Player
-+ *
-+ * This file supports the IP7500 Internet Audio Player:
-+ * 8007-1110 Rev 1.0
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#include <linux/device.h>
-+#include <linux/gpio.h>
-+#include <asm/board.h>
-+
-+#include <linux/delay.h>
-+
-+#include <linux/platform_device.h>
-+#include <asm/audio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+
-+#include <asm/ubicom32sd.h>
-+#include <asm/sd_tio.h>
-+
-+#include <asm/ubicom32bl.h>
-+
-+#include <asm/machdep.h>
-+
-+/******************************************************************************
-+ * SD/IO Port F (Slot 1) platform data
-+ */
-+static struct resource ip7500iap_portf_sd_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct ubicom32sd_card ip7500iap_portf_sd_cards[] = {
-+ [0] = {
-+ .pin_wp = GPIO_RF_7,
-+ .wp_polarity = 1,
-+ .pin_pwr = GPIO_RF_8,
-+ .pin_cd = GPIO_RF_6,
-+ },
-+};
-+
-+static struct ubicom32sd_platform_data ip7500iap_portf_sd_platform_data = {
-+ .ncards = 1,
-+ .cards = ip7500iap_portf_sd_cards,
-+};
-+
-+static struct platform_device ip7500iap_portf_sd_device = {
-+ .name = "ubicom32sd",
-+ .id = 0,
-+ .resource = ip7500iap_portf_sd_resources,
-+ .num_resources = ARRAY_SIZE(ip7500iap_portf_sd_resources),
-+ .dev = {
-+ .platform_data = &ip7500iap_portf_sd_platform_data,
-+ },
-+
-+};
-+
-+/*
-+ * ip7500iap_portf_sd_init
-+ */
-+static void ip7500iap_portf_sd_init(void)
-+{
-+ /*
-+ * Check the device tree for the sd_tio
-+ */
-+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
-+ if (!sd_node) {
-+ printk(KERN_INFO "PortF SDTIO not found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ ip7500iap_portf_sd_resources[0].start = sd_node->dn.sendirq;
-+ ip7500iap_portf_sd_resources[1].start = sd_node->dn.recvirq;
-+ ip7500iap_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
-+ ip7500iap_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-+
-+ platform_device_register(&ip7500iap_portf_sd_device);
-+}
-+
-+/******************************************************************************
-+ * SD/IO Port B (Slot 2) platform data
-+ */
-+static struct resource ip7500iap_portb_sd_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct ubicom32sd_card ip7500iap_portb_sd_cards[] = {
-+ [0] = {
-+ .pin_wp = GPIO_RB_13,
-+ .wp_polarity = 1,
-+ .pin_pwr = GPIO_RB_11,
-+ .pin_cd = GPIO_RB_12,
-+ },
-+};
-+
-+static struct ubicom32sd_platform_data ip7500iap_portb_sd_platform_data = {
-+ .ncards = 1,
-+ .cards = ip7500iap_portb_sd_cards,
-+};
-+
-+static struct platform_device ip7500iap_portb_sd_device = {
-+ .name = "ubicom32sd",
-+ .id = 1,
-+ .resource = ip7500iap_portb_sd_resources,
-+ .num_resources = ARRAY_SIZE(ip7500iap_portb_sd_resources),
-+ .dev = {
-+ .platform_data = &ip7500iap_portb_sd_platform_data,
-+ },
-+
-+};
-+
-+/*
-+ * ip7500iap_portb_sd_init
-+ */
-+static void ip7500iap_portb_sd_init(void)
-+{
-+ /*
-+ * Check the device tree for the sd_tio
-+ */
-+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
-+ if (!sd_node) {
-+ printk(KERN_INFO "PortB SDTIO not found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ ip7500iap_portb_sd_resources[0].start = sd_node->dn.sendirq;
-+ ip7500iap_portb_sd_resources[1].start = sd_node->dn.recvirq;
-+ ip7500iap_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
-+ ip7500iap_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-+
-+ platform_device_register(&ip7500iap_portb_sd_device);
-+}
-+
-+/******************************************************************************
-+ * Touch controller
-+ *
-+ * Connected via I2C bus, interrupt on PA6
-+ */
-+#include <linux/i2c/tsc2007.h>
-+
-+/*
-+ * ip7500iap_tsc2007_exit_platform_hw
-+ */
-+static void ip7500iap_tsc2007_exit_platform_hw(void)
-+{
-+ UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 19);
-+ gpio_free(GPIO_RA_6);
-+}
-+
-+/*
-+ * ip7500iap_tsc2007_init_platform_hw
-+ */
-+static int ip7500iap_tsc2007_init_platform_hw(void)
-+{
-+ int res = gpio_request(GPIO_RA_6, "TSC2007_IRQ");
-+ if (res) {
-+ return res;
-+ }
-+
-+ UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 19);
-+ UBICOM32_IO_PORT(RA)->ctl0 |= (0x02 << 19);
-+ return 0;
-+}
-+
-+/*
-+ * ip7500iap_tsc2007_get_pendown_state
-+ */
-+static int ip7500iap_tsc2007_get_pendown_state(void)
-+{
-+ return !gpio_get_value(GPIO_RA_6);
-+}
-+
-+static struct tsc2007_platform_data ip7500iap_tsc2007_data = {
-+ .model = 2007,
-+ .x_plate_ohms = 350,
-+ .get_pendown_state = ip7500iap_tsc2007_get_pendown_state,
-+ .init_platform_hw = ip7500iap_tsc2007_init_platform_hw,
-+ .exit_platform_hw = ip7500iap_tsc2007_exit_platform_hw,
-+};
-+
-+/******************************************************************************
-+ * i2c devices
-+ *
-+ * DO NOT CHANGE THE ORDER HERE unless you know how this works. There
-+ * are hardcoded indicies which refer to the order of drivers listed here.
-+ */
-+static struct i2c_board_info __initdata ip7500iap_i2c_board_info[] = {
-+ /*
-+ * U6, CS4350 DAC, address 0x4B
-+ */
-+ {
-+ .type = "cs4350",
-+ .addr = 0x4B,
-+ },
-+
-+ /*
-+ * U20, S35390A RTC, address 0x30
-+ */
-+ {
-+ .type = "s35390a",
-+ .addr = 0x30,
-+ },
-+
-+ /*
-+ * U9, TSC2007 Touch screen controller, address 0x49, irq RA6
-+ */
-+ {
-+ .type = "tsc2007",
-+ .addr = 0x49,
-+ .irq = 46,
-+ .platform_data = &ip7500iap_tsc2007_data,
-+ },
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PE4, SCL PE5
-+ */
-+static struct i2c_gpio_platform_data ip7500iap_i2c_data = {
-+ .sda_pin = GPIO_RF_14,
-+ .scl_pin = GPIO_RF_13,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .udelay = 50,
-+};
-+
-+static struct platform_device ip7500iap_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7500iap_i2c_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Backlight on the board PD0, hardware PWM
-+ */
-+static struct ubicom32bl_platform_data ip7500iap_backlight_data = {
-+ .type = UBICOM32BL_TYPE_PWM,
-+ .pwm_channel = 2,
-+ .pwm_prescale = 15,
-+ .pwm_period = 60,
-+ .default_intensity = 0x80,
-+};
-+
-+static struct platform_device ip7500iap_backlight_device = {
-+ .name = "ubicom32bl",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7500iap_backlight_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Devices on this board
-+ */
-+static struct platform_device *ip7500iap_devices[] __initdata = {
-+ &ip7500iap_i2c_device,
-+ &ip7500iap_backlight_device,
-+};
-+
-+/*
-+ * ip7500iap_power_off
-+ * Called to turn the power off for this board
-+ */
-+static void ip7500iap_power_off(void)
-+{
-+ gpio_set_value(GPIO_RF_11, 0);
-+}
-+
-+/*
-+ * ip7500iap_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7500iap_init(void)
-+{
-+ struct platform_device *audio_dev;
-+ struct platform_device *audio_dev2;
-+ int ret;
-+
-+ board_init();
-+
-+ ubi_gpio_init();
-+
-+ /*
-+ * Hold the POWER_HOLD line
-+ */
-+ ret = gpio_request(GPIO_RF_11, "POWER_HOLD");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RF_11, 1);
-+ mach_power_off = ip7500iap_power_off;
-+
-+ /*
-+ * DAC nRESET line
-+ */
-+ ret = gpio_request(GPIO_RE_7, "DAC_nRESET");
-+ if (ret) {
-+ printk(KERN_ERR "%s: could not request DAC_nRESET GPIO\n", __FUNCTION__);
-+ }
-+ gpio_direction_output(GPIO_RE_7, 0);
-+ udelay(1);
-+ gpio_set_value(GPIO_RE_7, 1);
-+
-+ /*
-+ * Bring up any SDIO slots
-+ */
-+ ip7500iap_portb_sd_init();
-+ ip7500iap_portf_sd_init();
-+
-+ /*
-+ * Bring up audio devices
-+ */
-+ platform_add_devices(ip7500iap_devices, ARRAY_SIZE(ip7500iap_devices));
-+
-+ audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0);
-+ if (audio_dev) {
-+ ip7500iap_i2c_board_info[0].platform_data = audio_dev;
-+ }
-+
-+ audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
-+ if (audio_dev2) {
-+ platform_device_register(audio_dev2);
-+ }
-+
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7500iap_i2c_board_info, ARRAY_SIZE(ip7500iap_i2c_board_info));
-+
-+ printk(KERN_INFO "IP7500 Internet Audio Player\n");
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7500iap_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500media.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500media.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500media.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500media.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,732 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7500media.c
-+ * Board file for IP7500 media board.
-+ *
-+ * Supports the following configuration
-+ * CPU Module:
-+ * P/N 8007-0510 rev 1.0 NOPHY
-+ * P/N 8007-0511 rev 1.1 NOPHY
-+ * DIP Switch SW2 configuration:
-+ * POS 1: on = PCI enabled
-+ * POS 2: off = TTYX => PF12
-+ * POS 3: off = TTYY => PF15
-+ * POS 4: unused
-+ * Media Board:
-+ * P/N 8007-0610 rev 1.0
-+ *
-+ * LCD Adapter Board: (optional)
-+ * P/N 8007-0920 rev 2.0
-+ * P/N 8007-0921 rev 2.1
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#include <linux/input.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/i2c/pca953x.h>
-+
-+#include <asm/board.h>
-+#include <asm/machdep.h>
-+#include <asm/ubicom32input_i2c.h>
-+#include <asm/ubicom32bl.h>
-+#include <asm/ubicom32lcdpower.h>
-+#include <asm/vdc_tio.h>
-+
-+#include <asm/ubicom32sd.h>
-+#include <asm/sd_tio.h>
-+#include <asm/devtree.h>
-+#include <asm/audio.h>
-+
-+#include <asm/ring_tio.h>
-+
-+/******************************************************************************
-+ * SD/IO Port F (Slot 1) platform data
-+ */
-+static struct resource ip7500media_portf_sd_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct ubicom32sd_card ip7500media_portf_sd_cards[] = {
-+ [0] = {
-+ .pin_wp = IP7500MEDIA_IO16,
-+ .wp_polarity = 1,
-+ .pin_pwr = IP7500MEDIA_IO20,
-+ .pin_cd = IP7500MEDIA_IO23,
-+ },
-+ [1] = {
-+ .pin_wp = IP7500MEDIA_IO17,
-+ .wp_polarity = 1,
-+ .pin_pwr = IP7500MEDIA_IO21,
-+ .pin_cd = IP7500MEDIA_IO24,
-+ },
-+};
-+
-+static struct ubicom32sd_platform_data ip7500media_portf_sd_platform_data = {
-+ .ncards = 2,
-+ .cards = ip7500media_portf_sd_cards,
-+};
-+
-+static struct platform_device ip7500media_portf_sd_device = {
-+ .name = "ubicom32sd",
-+ .id = 0,
-+ .resource = ip7500media_portf_sd_resources,
-+ .num_resources = ARRAY_SIZE(ip7500media_portf_sd_resources),
-+ .dev = {
-+ .platform_data = &ip7500media_portf_sd_platform_data,
-+ },
-+
-+};
-+
-+/*
-+ * ip7500media_portf_sd_init
-+ */
-+static void ip7500media_portf_sd_init(void)
-+{
-+ /*
-+ * Check the device tree for the sd_tio
-+ */
-+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
-+ if (!sd_node) {
-+ printk(KERN_INFO "PortF SDTIO not found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ ip7500media_portf_sd_resources[0].start = sd_node->dn.sendirq;
-+ ip7500media_portf_sd_resources[1].start = sd_node->dn.recvirq;
-+ ip7500media_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
-+ ip7500media_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-+
-+ platform_device_register(&ip7500media_portf_sd_device);
-+}
-+
-+/******************************************************************************
-+ * SD/IO Port B (Slot 2) platform data
-+ */
-+static struct resource ip7500media_portb_sd_resources[] = {
-+ /*
-+ * Send IRQ
-+ */
-+ [0] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Receive IRQ
-+ */
-+ [1] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+
-+ /*
-+ * Memory Mapped Registers
-+ */
-+ [2] = {
-+ /*
-+ * The init routine will query the devtree and fill this in
-+ */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct ubicom32sd_card ip7500media_portb_sd_cards[] = {
-+ [0] = {
-+ .pin_wp = IP7500MEDIA_IO19,
-+ .wp_polarity = 1,
-+ .pin_pwr = IP7500MEDIA_IO22,
-+ .pin_cd = IP7500MEDIA_IO18,
-+ },
-+};
-+
-+static struct ubicom32sd_platform_data ip7500media_portb_sd_platform_data = {
-+ .ncards = 1,
-+ .cards = ip7500media_portb_sd_cards,
-+};
-+
-+static struct platform_device ip7500media_portb_sd_device = {
-+ .name = "ubicom32sd",
-+ .id = 1,
-+ .resource = ip7500media_portb_sd_resources,
-+ .num_resources = ARRAY_SIZE(ip7500media_portb_sd_resources),
-+ .dev = {
-+ .platform_data = &ip7500media_portb_sd_platform_data,
-+ },
-+
-+};
-+
-+/*
-+ * ip7500media_portb_sd_init
-+ */
-+static void ip7500media_portb_sd_init(void)
-+{
-+ /*
-+ * Check the device tree for the sd_tio
-+ */
-+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
-+ if (!sd_node) {
-+ printk(KERN_INFO "PortB SDTIO not found\n");
-+ return;
-+ }
-+
-+ /*
-+ * Fill in the resources and platform data from devtree information
-+ */
-+ ip7500media_portb_sd_resources[0].start = sd_node->dn.sendirq;
-+ ip7500media_portb_sd_resources[1].start = sd_node->dn.recvirq;
-+ ip7500media_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
-+ ip7500media_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
-+
-+ platform_device_register(&ip7500media_portb_sd_device);
-+}
-+
-+/*
-+ * ip7500media_u17_setup
-+ * Called by I2C to tell us that u17 is setup.
-+ *
-+ * This function is called by I2C to tell us that u17 has been setup. All
-+ * devices which rely on this chip being initialized (or even present) need to
-+ * be initialized in this function otherwise they may get initialized too early.
-+ *
-+ * Currently the only device depending on u17 is the SDIO
-+ */
-+static int __init ip7500media_u17_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context)
-+{
-+ /*
-+ * Initialize the Port F/Port B SD slots (only the enabled ports will init)
-+ */
-+ ip7500media_portf_sd_init();
-+ ip7500media_portb_sd_init();
-+
-+ return 0;
-+}
-+
-+/******************************************************************************
-+ * LCD VGH on the board at PE6
-+ */
-+static struct ubicom32lcdpower_platform_data ip7500media_lcdpower_data = {
-+ .vgh_gpio = GPIO_RE_7,
-+ .vgh_polarity = true,
-+};
-+
-+static struct platform_device ip7500media_lcdpower_device = {
-+ .name = "ubicom32lcdpower",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7500media_lcdpower_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Backlight on the board PD0, hardware PWM
-+ */
-+static struct ubicom32bl_platform_data ip7500media_backlight_data = {
-+ .type = UBICOM32BL_TYPE_PWM,
-+ .pwm_channel = 2,
-+ .pwm_prescale = 15,
-+ .pwm_period = 60,
-+ .default_intensity = 0x80,
-+};
-+
-+static struct platform_device ip7500media_backlight_device = {
-+ .name = "ubicom32bl",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &ip7500media_backlight_data,
-+ },
-+};
-+
-+/******************************************************************************
-+ * Ubicom32Input on I2C, U15 MAX7310, address 0x18, 8 bits
-+ */
-+static struct ubicom32input_i2c_button ip7500media_ubicom32input_i2c_u15_buttons[] = {
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_LEFT,
-+ .bit = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_RIGHT,
-+ .bit = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_UP,
-+ .bit = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_DOWN,
-+ .bit = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ENTER,
-+ .bit = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_MENU,
-+ .bit = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .type = EV_KEY,
-+ .code = KEY_ESC,
-+ .bit = 6,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct ubicom32input_i2c_platform_data ip7500media_ubicom32input_i2c_u15_platform_data = {
-+ .buttons = ip7500media_ubicom32input_i2c_u15_buttons,
-+ .nbuttons = ARRAY_SIZE(ip7500media_ubicom32input_i2c_u15_buttons),
-+ .name = "Ubicom32 Input I2C U15",
-+};
-+
-+/******************************************************************************
-+ * Additional GPIO chips
-+ */
-+static struct pca953x_platform_data ip7500media_gpio_u16_platform_data = {
-+ .gpio_base = IP7500MEDIA_U16_BASE,
-+};
-+
-+static struct pca953x_platform_data ip7500media_gpio_u17_platform_data = {
-+ .gpio_base = IP7500MEDIA_U17_BASE,
-+ .setup = ip7500media_u17_setup,
-+};
-+
-+static struct pca953x_platform_data ip7500media_gpio_u18_platform_data = {
-+ .gpio_base = IP7500MEDIA_U18_BASE,
-+};
-+
-+
-+/******************************************************************************
-+ * Touch controller present on LCD Adapter board
-+ *
-+ * Connected via I2C bus, interrupt on PD1
-+ */
-+#include <linux/i2c/tsc2007.h>
-+
-+/*
-+ * ip7500media_tsc2007_exit_platform_hw
-+ */
-+static void ip7500media_tsc2007_exit_platform_hw(void)
-+{
-+ UBICOM32_IO_PORT(RD)->int_mask &= ~(1 << 11);
-+ UBICOM32_IO_PORT(RD)->ctl2 &= ~(0x03 << 16);
-+ gpio_free(GPIO_RD_1);
-+}
-+
-+/*
-+ * ip7500media_tsc2007_init_platform_hw
-+ */
-+static int ip7500media_tsc2007_init_platform_hw(void)
-+{
-+ int res = gpio_request(GPIO_RD_1, "TSC2007_IRQ");
-+ if (res) {
-+ return res;
-+ }
-+ UBICOM32_IO_PORT(RD)->function = 0;
-+ UBICOM32_IO_PORT(RD)->int_mask = (1 << 11);
-+ UBICOM32_IO_PORT(RD)->ctl2 &= ~(0x03 << 16);
-+ UBICOM32_IO_PORT(RD)->ctl2 |= (0x02 << 16);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ip7500media_tsc2007_clear_penirq
-+ */
-+static void ip7500media_tsc2007_clear_penirq(void)
-+{
-+ UBICOM32_IO_PORT(RD)->int_clr = (1 << 11);
-+}
-+
-+/*
-+ * ip7500media_tsc2007_get_pendown_state
-+ */
-+static int ip7500media_tsc2007_get_pendown_state(void)
-+{
-+ return !gpio_get_value(GPIO_RD_1);
-+}
-+
-+static struct tsc2007_platform_data ip7500media_tsc2007_data = {
-+ .model = 2007,
-+ .x_plate_ohms = 350,
-+ .get_pendown_state = ip7500media_tsc2007_get_pendown_state,
-+ .init_platform_hw = ip7500media_tsc2007_init_platform_hw,
-+ .exit_platform_hw = ip7500media_tsc2007_exit_platform_hw,
-+ .clear_penirq = ip7500media_tsc2007_clear_penirq,
-+};
-+
-+/******************************************************************************
-+ * Devices on the I2C bus
-+ *
-+ * BEWARE of changing the order of things in this array as we depend on
-+ * certain things to be in certain places.
-+ */
-+static struct i2c_board_info __initdata ip7500media_i2c_board_info[] = {
-+ /*
-+ * U6, CS4350 DAC, address 0x4B
-+ */
-+ {
-+ .type = "cs4350",
-+ .addr = 0x4B,
-+ },
-+
-+ /*
-+ * U14, S35390A RTC, address 0x30
-+ */
-+ {
-+ .type = "s35390a",
-+ .addr = 0x30,
-+ },
-+
-+ /*
-+ * U15, MAX7310 IO expander, 8 bits, address 0x18
-+ * IO0: User I/O (J16-1) (Left) IO4: User I/O (J16-5) (Enter)
-+ * IO1: User I/O (J16-2) (Right) IO5: User I/O (J16-6) (Menu)
-+ * IO2: User I/O (J16-3) (Up) IO6: User I/O (J16-7) (Back)
-+ * IO3: User I/O (J16-4) (Down) IO7: User I/O (J16-8)
-+ */
-+ {
-+ .type = "ubicom32in_max7310",
-+ .addr = 0x18,
-+ .platform_data = &ip7500media_ubicom32input_i2c_u15_platform_data,
-+ },
-+
-+ /*
-+ * U16, MAX7310 IO expander, 8 bits, address 0x1C
-+ * IO8 : User I/O (J16-9) IO12: User I/O (J16-17)
-+ * IO9 : User I/O (J16-10) IO13: User I/O (J16-18)
-+ * IO10: User I/O (J16-15) IO14: User I/O (J16-19)
-+ * IO11: User I/O (J16-16) IO15: User I/O (J16-20)
-+ */
-+ {
-+ .type = "max7310",
-+ .addr = 0x1C,
-+ .platform_data = &ip7500media_gpio_u16_platform_data,
-+ },
-+
-+ /*
-+ * U17, MAX7310 IO expander, 8 bits, address 0x1A
-+ * IO16: SDIO1A_WP IO20: SD1A_PWREN
-+ * IO17: SDIO1B_WP IO21: SD1B_PWREN
-+ * IO18: SDIO2_CD IO22: SD2_PWREN
-+ * IO19: SDIO2_WP IO23: SDIO1A_CD
-+ *
-+ */
-+ {
-+ .type = "max7310",
-+ .addr = 0x1A,
-+ .platform_data = &ip7500media_gpio_u17_platform_data,
-+ },
-+
-+ /*
-+ * U18, MAX7310 IOB expander, 8 bits, address 0x1E
-+ * IO24: SDIO1B_CD IO28: User I/O TP6
-+ * IO25: User I/O TP9 IO29: User I/O TP5
-+ * IO26: User I/O TP8 IO30: User I/O TP4
-+ * IO27: User I/O TP7 IO31: User I/O TP3
-+ */
-+ {
-+ .type = "max7310",
-+ .addr = 0x1E,
-+ .platform_data = &ip7500media_gpio_u18_platform_data,
-+ },
-+};
-+
-+/*
-+ * Additional I2C devices to add when a LCD adapter board is present
-+ */
-+static struct i2c_board_info __initdata ip7500media_lcd_adapter_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("tsc2007", 0x48),
-+ .irq = PORT_OTHER_INT(RD),
-+ .platform_data = &ip7500media_tsc2007_data,
-+ },
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PE4, SCL PE5
-+ */
-+static struct i2c_gpio_platform_data ip7500media_i2c_data = {
-+ .sda_pin = GPIO_RE_4,
-+ .scl_pin = GPIO_RE_5,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .udelay = 50,
-+};
-+
-+static struct platform_device ip7500media_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7500media_i2c_data,
-+ },
-+};
-+
-+/*
-+ * Virtual Frame Buffer device for use with LCD Adapter
-+ */
-+static struct platform_device ip7500media_vfb_device = {
-+ .name = "ubicom32vfb",
-+ .id = -1,
-+};
-+
-+/*
-+ * vdc_override:
-+ * 0: no override (auto-detect)
-+ * 1: force vdc usage
-+ * 2: force lcd adapter usage
-+ */
-+static int __initdata vdc_override = 0;
-+
-+/*
-+ * ip7500media_set_forcevdc
-+ * Called when forcevdc is present on the kernel boot line
-+ */
-+static int __init ip7500media_set_forcevdc(char *str)
-+{
-+ if (str[0] == '1') {
-+ vdc_override = 1;
-+ } else {
-+ vdc_override = 2;
-+ }
-+ return 1;
-+}
-+
-+/*
-+ * ip7500media_video_init
-+ * Called late to determine what kind of video we have on this board
-+ */
-+static int __init ip7500media_video_init(void)
-+{
-+ struct i2c_adapter *adap;
-+ struct i2c_msg msg[1];
-+ unsigned char *data;
-+ unsigned char checksum;
-+ int err;
-+ int i;
-+
-+ if (vdc_override == 1) {
-+ printk(KERN_INFO "Force VDCTIO mode\n");
-+ goto no_adapter;
-+ }
-+ if (vdc_override == 2) {
-+ printk(KERN_INFO "Force LCD Adapter Board mode\n");
-+ return 0;
-+ }
-+
-+ /*
-+ * Check to see if there is an EEPROM out there. If we see an
-+ * EEPROM then we will assume a LCD Adapter Board (8007-092x)
-+ * exists.
-+ */
-+ data = kmalloc(256, GFP_KERNEL);
-+ if (!data) {
-+ printk(KERN_WARNING "%s: Failed to allocate memory\n", __FUNCTION__);
-+ return -ENOMEM;
-+ }
-+
-+ adap = i2c_get_adapter(0);
-+ if (!adap) {
-+ printk(KERN_WARNING "%s: Failed to get i2c adapter\n", __FUNCTION__);
-+ kfree(data);
-+ return -ENODEV;
-+ }
-+ data[0] = 0;
-+ msg->addr = 0x50;
-+ msg->flags = 0;
-+ msg->len = 1;
-+ msg->buf = data;
-+ err = i2c_transfer(adap, msg, 1);
-+ if (err < 0) {
-+ goto no_adapter;
-+ }
-+
-+ msg->addr = 0x50;
-+ msg->flags = I2C_M_RD;
-+ msg->len = 256;
-+ msg->buf = data;
-+ err = i2c_transfer(adap, msg, 1);
-+ if (err < 0) {
-+ goto no_adapter;
-+ }
-+
-+ i2c_put_adapter(adap);
-+
-+ /*
-+ * Verify the checksum
-+ */
-+ checksum = 0xff;
-+ for (i = 0; i < 255; i++) {
-+ checksum ^= data[i];
-+ }
-+ if (checksum != data[255]) {
-+ printk(KERN_WARNING "%s: Checksum mismatch\n", __FUNCTION__);
-+ }
-+
-+ kfree(data);
-+
-+ /*
-+ * Bring up VFB
-+ */
-+ platform_device_register(&ip7500media_vfb_device);
-+
-+ /*
-+ * Add the i2c devices on the LCD Adapter board. (We have to use i2c_new_device
-+ * since it's late in the boot process.)
-+ */
-+ printk(KERN_INFO "%s: registering LCD Adapter board i2c resources\n", __FUNCTION__);
-+ for (i = 0; i < ARRAY_SIZE(ip7500media_lcd_adapter_i2c_board_info); i++) {
-+ i2c_new_device(adap, &ip7500media_lcd_adapter_i2c_board_info[i]);
-+ }
-+
-+ i2c_put_adapter(adap);
-+
-+ return 0;
-+
-+ /*
-+ * No LCD Adapter board, bring up VDC
-+ */
-+no_adapter:
-+ vdc_tio_init();
-+ return 0;
-+}
-+late_initcall(ip7500media_video_init);
-+__setup("forcevdc=", ip7500media_set_forcevdc);
-+
-+/*
-+ * ip7500media_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7500media_init(void)
-+{
-+ struct platform_device *audio_dev;
-+ int have_ethernet = (devtree_find_node("eth_lan") != 0);
-+
-+ board_init();
-+
-+ ubi_gpio_init();
-+
-+#ifdef CONFIG_UIO_UBICOM32RING
-+ ring_tio_init("decoder_ring");
-+#endif
-+
-+ /*
-+ * Register all of the devices we have on this board
-+ */
-+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
-+ platform_device_register(&ip7500media_i2c_device);
-+ platform_device_register(&ip7500media_backlight_device);
-+
-+ /*
-+ * If ethernet doesn't exist then we can init the lcdpower
-+ */
-+ if (!have_ethernet) {
-+ platform_device_register(&ip7500media_lcdpower_device);
-+ }
-+
-+ /*
-+ * Allocate the audio drivers. SPDIF not supported on boards with ethernet.
-+ */
-+ audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0);
-+ if (audio_dev) {
-+ ip7500media_i2c_board_info[0].platform_data = audio_dev;
-+ }
-+
-+ if (!have_ethernet) {
-+ struct platform_device *audio_dev2;
-+
-+ audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
-+ if (audio_dev2) {
-+ platform_device_register(audio_dev2);
-+ }
-+ }
-+
-+ /*
-+ * Register all of the devices which sit on the I2C bus
-+ */
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7500media_i2c_board_info, ARRAY_SIZE(ip7500media_i2c_board_info));
-+
-+ /*
-+ * We have to initialize the SDIO after the I2C IOB gets setup. SDIO is initialized in
-+ * ip7500media_u17_setup
-+ */
-+
-+ printk("IP7500 Media Board\n");
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7500media_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500module.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500module.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500module.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500module.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,55 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7500module.c
-+ * Support for IP7500 CPU module board.
-+ *
-+ * This file supports the IP7500 CPU module board:
-+ * 8007-0510 Rev 1.0
-+ * 8007-0510A Rev 1.0 (with ethernet)
-+ *
-+ * DIP Switch SW2 configuration: (*) default
-+ * POS 1: on(*) = PCI enabled, off = PCI disabled
-+ * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12
-+ * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15
-+ * POS 4: unused
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/device.h>
-+#include <linux/gpio.h>
-+#include <asm/board.h>
-+
-+/*
-+ * ip7500module_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7500module_init(void)
-+{
-+ board_init();
-+
-+ ubi_gpio_init();
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7500module_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,101 @@
-+/*
-+ * arch/ubicom32/mach-ip7k/board-ip7500wspkr.c
-+ * Support for IP7500 Wireless Speaker board.
-+ *
-+ * This file supports the IP7500 Wireless Speaker board:
-+ * 8007-1210 Rev 1.0
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#include <linux/device.h>
-+#include <linux/gpio.h>
-+#include <asm/board.h>
-+
-+#include <linux/platform_device.h>
-+#include <asm/audio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+
-+static struct i2c_board_info __initdata ip7500wspkr_i2c_board_info[] = {
-+ /*
-+ * U6, CS4350 DAC, address 0x4B
-+ */
-+ {
-+ .type = "cs4350",
-+ .addr = 0x4B,
-+ },
-+};
-+
-+/*
-+ * I2C bus on the board, SDA PE4, SCL PE5
-+ */
-+static struct i2c_gpio_platform_data ip7500wspkr_i2c_data = {
-+ .sda_pin = GPIO_RD_5,
-+ .scl_pin = GPIO_RD_6,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+ .udelay = 50,
-+};
-+
-+static struct platform_device ip7500wspkr_i2c_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ip7500wspkr_i2c_data,
-+ },
-+};
-+
-+static struct platform_device *ip7500wspkr_devices[] __initdata = {
-+ &ip7500wspkr_i2c_device,
-+};
-+
-+/*
-+ * ip7500wspkr_init
-+ * Called to add the devices which we have on this board
-+ */
-+static int __init ip7500wspkr_init(void)
-+{
-+ struct platform_device *audio_dev;
-+ struct platform_device *audio_dev2;
-+
-+ board_init();
-+
-+ ubi_gpio_init();
-+
-+ platform_add_devices(ip7500wspkr_devices, ARRAY_SIZE(ip7500wspkr_devices));
-+
-+ audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0);
-+ if (audio_dev) {
-+ ip7500wspkr_i2c_board_info[0].platform_data = audio_dev;
-+ }
-+
-+ audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0);
-+ if (audio_dev2) {
-+ platform_device_register(audio_dev2);
-+ }
-+
-+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
-+ i2c_register_board_info(0, ip7500wspkr_i2c_board_info, ARRAY_SIZE(ip7500wspkr_i2c_board_info));
-+
-+ printk(KERN_INFO "IP7500 Wireless Speaker Board\n");
-+
-+ return 0;
-+}
-+
-+arch_initcall(ip7500wspkr_init);
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/Kconfig linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/Kconfig
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/Kconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/Kconfig 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,205 @@
-+config IP7145DPF
-+ bool "IP7145DPF"
-+ select UBICOM32_V4
-+ select UBICOM_INPUT
-+ select UBICOM_INPUT_I2C
-+ select RTC_CLASS
-+ select RTC_DRV_S35390A
-+ select I2C
-+ select I2C_GPIO
-+ select GPIO_PCA953X
-+ select FB
-+ select FB_UBICOM32
-+ select LCD_CLASS_DEVICE
-+ select LCD_UBICOM32POWER
-+ select BACKLIGHT_LCD_SUPPORT
-+ select BACKLIGHT_CLASS_DEVICE
-+ select BACKLIGHT_UBICOM32
-+ select SND_UBI32
-+ select MMC_UBICOM32
-+ select MMC
-+ select MMC_BLOCK
-+ help
-+ IP7145 Digital Picture Frame reference design, supports:
-+ 8007-0410 v1.0
-+
-+config IP7160RGW
-+ bool "IP7160RGW"
-+ select UBICOM32_V4
-+ select UBICOM_INPUT
-+ select NEW_LEDS
-+ select LEDS_CLASS
-+ select LEDS_GPIO
-+ select SPI
-+ select SPI_UBICOM32_GPIO
-+ select VLAN_8021Q
-+ select UBICOM_SWITCH
-+ select UBICOM_SWITCH_BCM539X
-+ help
-+ Ubicom IP7160 RGW Eval, supports:
-+ 8007-0110 v1.0
-+ 8007-0111 v1.1
-+ 8007-0112 v1.2
-+
-+config IP7160RGWLCD
-+ bool "IP7160RGWLCD"
-+ select UBICOM32_V4
-+ select UBICOM_INPUT
-+ select NEW_LEDS
-+ select LEDS_CLASS
-+ select LEDS_GPIO
-+ select SPI
-+ select SPI_UBICOM32_GPIO
-+ select VLAN_8021Q
-+ select UBICOM_SWITCH
-+ select UBICOM_SWITCH_BCM539X
-+ select INPUT_TOUCHSCREEN
-+ select TOUCHSCREEN_TSC2007
-+ select FB
-+ select FB_UBICOM32_VIRTUAL
-+ select I2C
-+ select I2C_GPIO
-+ help
-+ Ubicom IP7160 RGW Eval, supports:
-+ 8007-0112 v1.2 + 8007-1410 v1.0
-+
-+ With Ubicom LCD Adapter
-+ 8007-0920 v2.0
-+ 8007-0921 v2.1
-+
-+
-+config IP7160BRINGUP
-+ bool "IP7160BRINGUP"
-+ select UBICOM32_V4
-+ select NEW_LEDS
-+ select LEDS_CLASS
-+ select LEDS_GPIO
-+ help
-+ Ubicom IP7160 Bringup, supports:
-+ 8007-0010 v1.0
-+
-+config IP7160DPF
-+ bool "IP7160DPF"
-+ select UBICOM32_V4
-+ select I2C
-+ select I2C_GPIO
-+ select FB
-+ select FB_UBICOM32
-+ select BACKLIGHT_LCD_SUPPORT
-+ select BACKLIGHT_CLASS_DEVICE
-+ select SND_UBI32
-+ select SND_UBI32_AUDIO_CS4350
-+ select UBICOM_HID
-+ help
-+ IP7160 Digital Picture Frame board, supports:
-+ 8007-0211 Rev 1.1
-+
-+config IP7500MODULE
-+ bool "IP7500MODULE"
-+ select UBICOM32_V4
-+ help
-+ Ubicom IP7500 CPU Module board, supports:
-+ 8007-0510 v1.0
-+ 8007-0510A v1.0
-+
-+ Please see ip7500module.c for more details.
-+
-+config IP7500AV
-+ bool "IP7500AV"
-+ select UBICOM32_V4
-+ select I2C
-+ select I2C_GPIO
-+ select SND_UBI32
-+ select SND_UBI32_AUDIO_CS4384
-+ select FB
-+ select FB_UBICOM32
-+ help
-+ Ubicom IP7500 Audio Video board, supports:
-+ 8007-0810 v1.0
-+
-+ With Ubicom IP7500 CPU Module board:
-+ 8007-0510 v1.0 -or-
-+ 8007-0510A v1.0
-+
-+ Please see ip7500av.c for more details.
-+
-+config IP7500MEDIA
-+ bool "IP7500MEDIA"
-+ select UBICOM32_V4
-+ select UBICOM_INPUT_I2C
-+ select RTC_CLASS
-+ select RTC_DRV_S35390A
-+ select I2C
-+ select I2C_GPIO
-+ select GPIO_PCA953X
-+ select FB
-+ select FB_UBICOM32
-+ select FB_UBICOM32_VIRTUAL
-+ select FB_UBICOM32_VIRTUAL_NOAUTO
-+ select LCD_CLASS_DEVICE
-+ select LCD_UBICOM32POWER
-+ select BACKLIGHT_LCD_SUPPORT
-+ select BACKLIGHT_CLASS_DEVICE
-+ select BACKLIGHT_UBICOM32
-+ select INPUT_TOUCHSCREEN
-+ select TOUCHSCREEN_TSC2007
-+ select SOUND
-+ select SND
-+ select SND_UBI32
-+ select SND_UBI32_AUDIO_CS4350
-+ select MMC_UBICOM32
-+ select MMC
-+ select MMC_BLOCK
-+ help
-+ IP7500 Media Board w/ IP7500 CPU Module board, supports:
-+ 8007-0610 v1.0 w/ 8007-0510 v1.0
-+ 8007-0610 v1.0 w/ 8007-0510 v1.0 NOPHY
-+ 8007-0610 v1.0 w/ 8007-0511 v1.1 NOPHY
-+
-+ Also supports optional LCD Adapter board:
-+ 8006-0920 v2.0
-+ 8006-0921 v2.1
-+
-+ Please see ip7500media.c for more details.
-+
-+config IP7500WSPKR
-+ bool "IP7500WSPKR"
-+ select UBICOM32_V4
-+ select I2C
-+ select I2C_GPIO
-+ select SOUND
-+ select SND
-+ select SND_UBI32
-+ select SND_UBI32_AUDIO_CS4350
-+ help
-+ IP7500 Wireless Speaker Board, supports:
-+ 8007-1210 v1.0
-+
-+ Please see ip7500wspkr.c for more details.
-+
-+config IP7500IAP
-+ bool "IP7500IAP"
-+ select UBICOM32_V4
-+ select I2C
-+ select I2C_GPIO
-+ select FB
-+ select FB_UBICOM32_VIRTUAL
-+ select SOUND
-+ select SND
-+ select SND_UBI32
-+ select SND_UBI32_AUDIO_CS4350
-+ select RTC_CLASS
-+ select RTC_DRV_S35390A
-+ select INPUT_TOUCHSCREEN
-+ select TOUCHSCREEN_TSC2007
-+ select BACKLIGHT_LCD_SUPPORT
-+ select BACKLIGHT_CLASS_DEVICE
-+ select BACKLIGHT_UBICOM32
-+ help
-+ IP7500 Internet Audio Player, supports:
-+ 8007-1110 v1.0
-+
-+ Please see ip7500iap.c for more details.
-+
-+
-+ Please see ip7500media.c for more details.
-diff -ruN linux-2.6.30.10/arch/ubicom32/mach-ip7k/Makefile linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/Makefile
---- linux-2.6.30.10/arch/ubicom32/mach-ip7k/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mach-ip7k/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,38 @@
-+#
-+# arch/ubicom32/mach-ip7k/Makefile
-+# Makefile for ip7k based boards.
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+obj-$(CONFIG_IP7145DPF) += board-ip7145dpf.o
-+obj-$(CONFIG_IP7160RGW) += board-ip7160rgw.o
-+obj-$(CONFIG_IP7160RGWLCD) += board-ip7160rgw.o
-+obj-$(CONFIG_IP7160BRINGUP) += board-ip7160bringup.o
-+obj-$(CONFIG_IP7160DPF) += board-ip7160dpf.o
-+obj-$(CONFIG_IP7500MODULE) += board-ip7500module.o
-+obj-$(CONFIG_IP7500MEDIA) += board-ip7500media.o
-+obj-$(CONFIG_IP7500AV) += board-ip7500av.o
-+obj-$(CONFIG_IP7500WSPKR) += board-ip7500wspkr.o
-+obj-$(CONFIG_IP7500IAP) += board-ip7500iap.o
-diff -ruN linux-2.6.30.10/arch/ubicom32/Makefile linux-2.6.30.10-ubi/arch/ubicom32/Makefile
---- linux-2.6.30.10/arch/ubicom32/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,104 @@
-+#
-+# arch/ubicom32/Makefile
-+# <TODO: Replace with short file description>
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+KBUILD_DEFCONFIG :=
-+
-+# setup the machine name and machine dependent settings
-+machine-$(CONFIG_UBICOM32_V3) := ip5k
-+machine-$(CONFIG_UBICOM32_V4) := ip7k
-+MACHINE := $(machine-y)
-+export MACHINE
-+
-+model-$(CONFIG_RAMKERNEL) := ram
-+model-$(CONFIG_ROMKERNEL) := rom
-+MODEL := $(model-y)
-+export MODEL
-+
-+CPUCLASS := $(cpuclass-y)
-+
-+export CPUCLASS
-+
-+#
-+# We want the core kernel built using the fastcall ABI but modules need
-+# to be built using the slower calling convention because they could be
-+# loaded out of range for fast calls.
-+#
-+CFLAGS_KERNEL += -mfastcall
-+CFLAGS_MODULE += -mno-fastcall
-+
-+#
-+# Some CFLAG additions based on specific CPU type.
-+#
-+cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000
-+cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000
-+
-+ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
-+LDFLAGS_vmlinux := $(ldflags-y)
-+
-+GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
-+GCC_LIBS := $(GCCLIBDIR)/libgcc.a
-+
-+KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
-+KBUILD_AFLAGS += $(cflags-y)
-+
-+KBUILD_CFLAGS += -D__linux__ -Dlinux
-+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-+
-+# include any machine specific directory
-+ifneq ($(machine-y),)
-+core-y += arch/$(ARCH)/mach-$(MACHINE)/
-+endif
-+
-+head-y := arch/$(ARCH)/kernel/head.o
-+
-+core-y += arch/$(ARCH)/kernel/ \
-+ arch/$(ARCH)/mm/ \
-+ arch/$(ARCH)/crypto/ \
-+ arch/$(ARCH)/mach-common/
-+
-+drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
-+
-+libs-y += arch/$(ARCH)/lib/
-+libs-y += $(GCC_LIBS)
-+
-+archclean:
-+
-+# make sure developer has selected a valid board
-+ifeq ($(CONFIG_NOBOARD),y)
-+# $(error have to select a valid board file $(CONFIG_NOBOARD), please run kernel config again)
-+_all: config_board_error
-+endif
-+
-+config_board_error:
-+ @echo "*************************************************"
-+ @echo "You have not selected a proper board."
-+ @echo "Please run menuconfig (or config) against your"
-+ @echo "kernel and choose your board under Processor"
-+ @echo "options"
-+ @echo "*************************************************"
-+ @exit 1
-diff -ruN linux-2.6.30.10/arch/ubicom32/mm/fault.c linux-2.6.30.10-ubi/arch/ubicom32/mm/fault.c
---- linux-2.6.30.10/arch/ubicom32/mm/fault.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mm/fault.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,80 @@
-+/*
-+ * arch/ubicom32/mm/fault.c
-+ * Ubicom32 architecture page fault implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
-+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
-+ *
-+ * Based on:
-+ *
-+ * linux/arch/m68k/mm/fault.c
-+ *
-+ * Copyright (C) 1995 Hamish Macdonald
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/mman.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/ptrace.h>
-+
-+#include <asm/system.h>
-+#include <asm/pgtable.h>
-+
-+extern void die_if_kernel(char *, struct pt_regs *, long);
-+
-+/*
-+ * This routine handles page faults. It determines the problem, and
-+ * then passes it off to one of the appropriate routines.
-+ *
-+ * error_code:
-+ * bit 0 == 0 means no page found, 1 means protection fault
-+ * bit 1 == 0 means read, 1 means write
-+ *
-+ * If this routine detects a bad access, it returns 1, otherwise it
-+ * returns 0.
-+ */
-+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-+ unsigned long error_code)
-+{
-+#ifdef DEBUG
-+ printk (KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
-+ regs->sr, regs->pc, address, error_code);
-+#endif
-+
-+ /*
-+ * Oops. The kernel tried to access some bad page. We'll have to
-+ * terminate things with extreme prejudice.
-+ */
-+ if ((unsigned long) address < PAGE_SIZE) {
-+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-+ } else
-+ printk(KERN_ALERT "Unable to handle kernel access");
-+ printk(KERN_ALERT " at virtual address %08lx\n",address);
-+ die_if_kernel("Oops", regs, error_code);
-+ do_exit(SIGKILL);
-+
-+ return 1;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mm/init.c linux-2.6.30.10-ubi/arch/ubicom32/mm/init.c
---- linux-2.6.30.10/arch/ubicom32/mm/init.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mm/init.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,262 @@
-+/*
-+ * arch/ubicom32/mm/init.c
-+ * Ubicom32 architecture virtual memory initialization.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
-+ * Kenneth Albanowski <kjahds@kjahds.com>,
-+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
-+ *
-+ * Based on:
-+ *
-+ * linux/arch/m68k/mm/init.c
-+ *
-+ * Copyright (C) 1995 Hamish Macdonald
-+ *
-+ * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
-+ * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/ptrace.h>
-+#include <linux/mman.h>
-+#include <linux/mm.h>
-+#include <linux/swap.h>
-+#include <linux/init.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <linux/bootmem.h>
-+#include <linux/slab.h>
-+
-+#include <asm/setup.h>
-+#include <asm/segment.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+#include <asm/machdep.h>
-+#include <asm/ocm-alloc.h>
-+#include <asm/processor.h>
-+
-+#undef DEBUG
-+
-+extern void die_if_kernel(char *,struct pt_regs *,long);
-+extern void free_initmem(void);
-+
-+/*
-+ * BAD_PAGE is the page that is used for page faults when linux
-+ * is out-of-memory. Older versions of linux just did a
-+ * do_exit(), but using this instead means there is less risk
-+ * for a process dying in kernel mode, possibly leaving a inode
-+ * unused etc..
-+ *
-+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
-+ * to point to BAD_PAGE entries.
-+ *
-+ * ZERO_PAGE is a special page that is used for zero-initialized
-+ * data and COW.
-+ */
-+static unsigned long empty_bad_page_table;
-+
-+static unsigned long empty_bad_page;
-+
-+unsigned long empty_zero_page;
-+
-+void show_mem(void)
-+{
-+ unsigned long i;
-+ int free = 0, total = 0, reserved = 0, shared = 0;
-+ int cached = 0;
-+
-+ printk(KERN_INFO "\nMem-info:\n");
-+ show_free_areas();
-+ i = max_mapnr;
-+ while (i-- > 0) {
-+ total++;
-+ if (PageReserved(mem_map+i))
-+ reserved++;
-+ else if (PageSwapCache(mem_map+i))
-+ cached++;
-+ else if (!page_count(mem_map+i))
-+ free++;
-+ else
-+ shared += page_count(mem_map+i) - 1;
-+ }
-+ printk(KERN_INFO "%d pages of RAM\n",total);
-+ printk(KERN_INFO "%d free pages\n",free);
-+ printk(KERN_INFO "%d reserved pages\n",reserved);
-+ printk(KERN_INFO "%d pages shared\n",shared);
-+ printk(KERN_INFO "%d pages swap cached\n",cached);
-+}
-+
-+extern unsigned long memory_start;
-+extern unsigned long memory_end;
-+extern char __ocm_free_begin;
-+extern char __ocm_free_end;
-+
-+/*
-+ * paging_init() continues the virtual memory environment setup which
-+ * was begun by the code in arch/head.S.
-+ * The parameters are pointers to where to stick the starting and ending
-+ * addresses of available kernel virtual memory.
-+ */
-+void __init paging_init(void)
-+{
-+ /*
-+ * Make sure start_mem is page aligned, otherwise bootmem and
-+ * page_alloc get different views of the world.
-+ */
-+#ifdef DEBUG
-+ unsigned long start_mem = PAGE_ALIGN(memory_start);
-+#endif
-+ unsigned long end_mem = memory_end & PAGE_MASK;
-+
-+#ifdef DEBUG
-+ printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n",
-+ start_mem, end_mem);
-+#endif
-+
-+ /*
-+ * Initialize the bad page table and bad page to point
-+ * to a couple of allocated pages.
-+ */
-+ empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-+ empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
-+
-+ /*
-+ * TODO: enable setting up for user memory management interface.
-+ */
-+
-+#ifdef DEBUG
-+ printk (KERN_DEBUG "before free_area_init\n");
-+
-+ printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
-+ start_mem, end_mem);
-+#endif
-+
-+ {
-+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
-+#ifdef CONFIG_ZONE_DMA
-+ zones_size[ZONE_DMA] = OCMSIZE >> PAGE_SHIFT;
-+#endif
-+ zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-+#ifdef CONFIG_HIGHMEM
-+ zones_size[ZONE_HIGHMEM] = 0;
-+#endif
-+ free_area_init(zones_size);
-+ }
-+}
-+
-+void __init mem_init(void)
-+{
-+ int codek = 0, datak = 0, initk = 0;
-+ unsigned long tmp, ram_start, ram_end, len;
-+ extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
-+
-+ unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
-+ unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */
-+ processor_dram(&ram_start, &ram_end);
-+ len = (ram_end - ram_start) + OCMSIZE;
-+#ifdef DEBUG
-+ printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-+#endif
-+
-+ end_mem &= PAGE_MASK;
-+ high_memory = (void *) end_mem;
-+
-+ start_mem = PAGE_ALIGN(start_mem);
-+ max_mapnr = num_physpages = (((unsigned long) high_memory) - PAGE_OFFSET) >> PAGE_SHIFT;
-+
-+ /* this will put all memory onto the freelists */
-+#ifdef CONFIG_ZONE_DMA
-+ {
-+ unsigned long ocm_free_begin = (unsigned long)&__ocm_free_begin;
-+ unsigned long ocm_free_end = (unsigned long)&__ocm_free_end;
-+ unsigned long zone_dma_begin = (ocm_free_begin + PAGE_SIZE - 1) & PAGE_MASK;
-+ unsigned long zone_dma_end = ocm_free_end & PAGE_MASK;
-+ if (zone_dma_end > zone_dma_begin)
-+ free_bootmem(zone_dma_begin, zone_dma_end-zone_dma_begin);
-+ }
-+#endif
-+ totalram_pages = free_all_bootmem();
-+
-+ codek = (&_etext - &_stext) >> 10;
-+ datak = (&_ebss - &_sdata) >> 10;
-+ initk = (&__init_begin - &__init_end) >> 10;
-+
-+ tmp = nr_free_pages() << PAGE_SHIFT;
-+ printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n",
-+ tmp >> 10,
-+ len >> 10,
-+ codek,
-+ datak
-+ );
-+
-+}
-+
-+#ifdef CONFIG_BLK_DEV_INITRD
-+void free_initrd_mem(unsigned long start, unsigned long end)
-+{
-+ int pages = 0;
-+ for (; start < end; start += PAGE_SIZE) {
-+ ClearPageReserved(virt_to_page(start));
-+ init_page_count(virt_to_page(start));
-+ free_page(start);
-+ totalram_pages++;
-+ pages++;
-+ }
-+ printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
-+}
-+#endif
-+
-+void
-+free_initmem()
-+{
-+#ifdef CONFIG_RAMKERNEL
-+ unsigned long addr;
-+ extern char __init_begin, __init_end;
-+ /*
-+ * The following code should be cool even if these sections
-+ * are not page aligned.
-+ */
-+ addr = PAGE_ALIGN((unsigned long)(&__init_begin));
-+ /* next to check that the page we free is not a partial page */
-+ for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
-+ ClearPageReserved(virt_to_page(addr));
-+ init_page_count(virt_to_page(addr));
-+ free_page(addr);
-+ totalram_pages++;
-+ }
-+ printk(KERN_NOTICE "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
-+ (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
-+ (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
-+ (int)(addr - PAGE_SIZE));
-+#endif
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mm/kmap.c linux-2.6.30.10-ubi/arch/ubicom32/mm/kmap.c
---- linux-2.6.30.10/arch/ubicom32/mm/kmap.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mm/kmap.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,79 @@
-+/*
-+ * arch/ubicom32/mm/kmap.c
-+ * Ubicom32 architecture non-mmu ioremap and friends implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2000 Lineo, <davidm@snapgear.com>
-+ * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+
-+#include <asm/setup.h>
-+#include <asm/segment.h>
-+#include <asm/page.h>
-+#include <asm/pgalloc.h>
-+#include <asm/io.h>
-+#include <asm/system.h>
-+
-+#undef DEBUG
-+
-+/*
-+ * Map some physical address range into the kernel address space.
-+ */
-+void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-+{
-+ return (void *)physaddr;
-+}
-+
-+/*
-+ * Unmap a ioremap()ed region again.
-+ */
-+void iounmap(void *addr)
-+{
-+}
-+
-+/*
-+ * __iounmap unmaps nearly everything, so be careful
-+ * it doesn't free currently pointer/page tables anymore but it
-+ * wans't used anyway and might be added later.
-+ */
-+void __iounmap(void *addr, unsigned long size)
-+{
-+}
-+
-+/*
-+ * Set new cache mode for some kernel address space.
-+ * The caller must push data for that range itself, if such data may already
-+ * be in the cache.
-+ */
-+void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
-+{
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mm/Makefile linux-2.6.30.10-ubi/arch/ubicom32/mm/Makefile
---- linux-2.6.30.10/arch/ubicom32/mm/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mm/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,32 @@
-+#
-+# arch/ubicom32/mm/Makefile
-+# <TODO: Replace with short file description>
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+#
-+# Makefile for the linux m68knommu specific parts of the memory manager.
-+#
-+
-+obj-y += init.o fault.o memory.o kmap.o ocm-alloc.o
-diff -ruN linux-2.6.30.10/arch/ubicom32/mm/memory.c linux-2.6.30.10-ubi/arch/ubicom32/mm/memory.c
---- linux-2.6.30.10/arch/ubicom32/mm/memory.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mm/memory.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,58 @@
-+/*
-+ * arch/ubicom32/mm/memory.c
-+ * Ubicom32 architecture kernel_map() implementation.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
-+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
-+ *
-+ * Based on:
-+ *
-+ * linux/arch/m68k/mm/memory.c
-+ *
-+ * Copyright (C) 1995 Hamish Macdonald
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+
-+#include <asm/segment.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-+#include <asm/system.h>
-+
-+/*
-+ * Map some physical address range into the kernel address space.
-+ * The code is copied and adapted from map_chunk().
-+ */
-+
-+unsigned long kernel_map(unsigned long paddr, unsigned long size,
-+ int nocacheflag, unsigned long *memavailp )
-+{
-+ return paddr;
-+}
-diff -ruN linux-2.6.30.10/arch/ubicom32/mm/ocm-alloc.c linux-2.6.30.10-ubi/arch/ubicom32/mm/ocm-alloc.c
---- linux-2.6.30.10/arch/ubicom32/mm/ocm-alloc.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/mm/ocm-alloc.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,487 @@
-+/*
-+ * arch/ubicom32/mm/ocm-alloc.c
-+ * OCM allocator for Uibcom32 On-Chip memory
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright 2004-2008 Analog Devices Inc.
-+ *
-+ * Based on:
-+ *
-+ * arch/blackfin/mm/sram-alloc.c
-+ *
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/ioport.h>
-+#include <linux/fcntl.h>
-+#include <linux/init.h>
-+#include <linux/poll.h>
-+#include <linux/proc_fs.h>
-+#include <linux/mutex.h>
-+#include <linux/rtc.h>
-+#include <asm/ocm-alloc.h>
-+
-+#if 0
-+#define DEBUGP printk
-+#else
-+#define DEBUGP(fmt, a...)
-+#endif
-+/*
-+ * the data structure for OCM heap pieces
-+ */
-+struct ocm_piece {
-+ void *paddr;
-+ int size;
-+ pid_t pid;
-+ struct ocm_piece *next;
-+};
-+
-+/*
-+ * struct ocm_heap
-+ */
-+struct ocm_heap {
-+ struct ocm_piece free_head;
-+ struct ocm_piece used_head;
-+ struct mutex lock;
-+};
-+
-+static struct ocm_heap ocm_inst_heap;
-+int ubi32_ocm_skbuf_max = 21, ubi32_ocm_skbuf, ubi32_ddr_skbuf;
-+
-+/*
-+ * OCM area for storing code
-+ */
-+extern asmlinkage void *__ocm_free_begin;
-+extern asmlinkage void *__ocm_free_end;
-+extern asmlinkage void *__ocm_inst_heap_begin;
-+extern asmlinkage void *__ocm_inst_heap_end;
-+#define OCM_INST_HEAP_BEGIN ((unsigned int)&__ocm_inst_heap_begin)
-+#define OCM_INST_HEAP_END ((unsigned int)&__ocm_inst_heap_end)
-+#define OCM_INST_HEAP_LENGTH (OCM_INST_HEAP_END - OCM_INST_HEAP_BEGIN)
-+
-+static struct kmem_cache *ocm_piece_cache;
-+
-+/*
-+ * _ocm_heap_init()
-+ */
-+static int __init _ocm_heap_init(struct ocm_heap *ocmh,
-+ unsigned int start,
-+ unsigned int size)
-+{
-+ ocmh->free_head.next = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL);
-+
-+ if (!ocmh->free_head.next)
-+ return -1;
-+
-+ ocmh->free_head.next->paddr = (void *)start;
-+ ocmh->free_head.next->size = size;
-+ ocmh->free_head.next->pid = 0;
-+ ocmh->free_head.next->next = 0;
-+
-+ ocmh->used_head.next = NULL;
-+
-+ /* mutex initialize */
-+ mutex_init(&ocmh->lock);
-+
-+ return 0;
-+}
-+
-+/*
-+ * _ocm_alloc_init()
-+ *
-+ * starts the ocm heap(s)
-+ */
-+static int __init _ocm_alloc_init(void)
-+{
-+ if (OCM_INST_HEAP_LENGTH) {
-+ ocm_piece_cache = kmem_cache_create("ocm_piece_cache",
-+ sizeof(struct ocm_piece),
-+ 0, SLAB_PANIC, NULL);
-+
-+ if (_ocm_heap_init(&ocm_inst_heap,
-+ OCM_INST_HEAP_BEGIN,
-+ OCM_INST_HEAP_LENGTH) == 0)
-+ printk(KERN_INFO "OCM Instruction Heap %d KB\n",
-+ OCM_INST_HEAP_LENGTH >> 10);
-+ else
-+ printk(KERN_INFO "Failed to initialize OCM "
-+ "Instruction Heap\n");
-+
-+ } else
-+ printk(KERN_INFO "No space available for OCM "
-+ "Instruction Heap\n");
-+
-+ return 0;
-+}
-+pure_initcall(_ocm_alloc_init);
-+
-+/*
-+ * _ocm_alloc()
-+ * generic alloc a block in the ocm heap, if successful
-+ * returns the pointer.
-+ */
-+static void *_ocm_alloc(size_t size, pid_t pid, struct ocm_heap *ocmheap)
-+{
-+ struct ocm_piece *pslot, *plast, *pavail;
-+ struct ocm_piece *pfree_head = &ocmheap->free_head;
-+ struct ocm_piece *pused_head = &ocmheap->used_head;
-+
-+ if (size <= 0 || !pfree_head || !pused_head)
-+ return NULL;
-+
-+ /* Align the size */
-+ size = (size + 3) & ~3;
-+
-+ pslot = pfree_head->next;
-+ plast = pfree_head;
-+
-+ /*
-+ * search an available piece slot
-+ */
-+ while (pslot != NULL && size > pslot->size) {
-+ plast = pslot;
-+ pslot = pslot->next;
-+ }
-+
-+ if (!pslot)
-+ return NULL;
-+
-+ if (pslot->size == size) {
-+ /*
-+ * Unlink this block from the list
-+ */
-+ plast->next = pslot->next;
-+ pavail = pslot;
-+ } else {
-+ /*
-+ * Split this block in two.
-+ */
-+ pavail = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL);
-+
-+ if (!pavail)
-+ return NULL;
-+
-+ pavail->paddr = pslot->paddr;
-+ pavail->size = size;
-+ pslot->paddr += size;
-+ pslot->size -= size;
-+ }
-+
-+ pavail->pid = pid;
-+
-+ pslot = pused_head->next;
-+ plast = pused_head;
-+
-+ /*
-+ * insert new piece into used piece list !!!
-+ */
-+ while (pslot != NULL && pavail->paddr < pslot->paddr) {
-+ plast = pslot;
-+ pslot = pslot->next;
-+ }
-+
-+ pavail->next = pslot;
-+ plast->next = pavail;
-+
-+ DEBUGP("_ocm_alloc %d bytes at %p from in %p",
-+ size, pavail->paddr, ocmheap);
-+
-+ return pavail->paddr;
-+}
-+
-+#if 0
-+/* Allocate the largest available block. */
-+static void *_ocm_alloc_max(struct ocm_heap *ocmheap,
-+ unsigned long *psize)
-+{
-+ struct ocm_piece *pfree_head = &ocmheap->free_head;
-+ struct ocm_piece *pslot, *pmax;
-+
-+ pmax = pslot = pfree_head->next;
-+
-+ /* search an available piece slot */
-+ while (pslot != NULL) {
-+ if (pslot->size > pmax->size)
-+ pmax = pslot;
-+ pslot = pslot->next;
-+ }
-+
-+ if (!pmax)
-+ return NULL;
-+
-+ *psize = pmax->size;
-+
-+ return _ocm_alloc(*psize, ocmheap);
-+}
-+#endif
-+
-+/*
-+ * _ocm_free()
-+ * generic free a block in the ocm heap, if successful
-+ */
-+static int _ocm_free(const void *addr,
-+ struct ocm_heap *ocmheap)
-+{
-+ struct ocm_piece *pslot, *plast, *pavail;
-+ struct ocm_piece *pfree_head = &ocmheap->free_head;
-+ struct ocm_piece *pused_head = &ocmheap->used_head;
-+
-+ /* search the relevant memory slot */
-+ pslot = pused_head->next;
-+ plast = pused_head;
-+
-+ /* search an available piece slot */
-+ while (pslot != NULL && pslot->paddr != addr) {
-+ plast = pslot;
-+ pslot = pslot->next;
-+ }
-+
-+ if (!pslot) {
-+ DEBUGP("_ocm_free %p not found in %p", addr, ocmheap);
-+ return -1;
-+ }
-+ DEBUGP("_ocm_free %p from in %p", addr, ocmheap);
-+
-+ plast->next = pslot->next;
-+ pavail = pslot;
-+ pavail->pid = 0;
-+
-+ /* insert free pieces back to the free list */
-+ pslot = pfree_head->next;
-+ plast = pfree_head;
-+
-+ while (pslot != NULL && addr > pslot->paddr) {
-+ plast = pslot;
-+ pslot = pslot->next;
-+ }
-+
-+ if (plast != pfree_head &&
-+ plast->paddr + plast->size == pavail->paddr) {
-+ plast->size += pavail->size;
-+ kmem_cache_free(ocm_piece_cache, pavail);
-+ } else {
-+ pavail->next = plast->next;
-+ plast->next = pavail;
-+ plast = pavail;
-+ }
-+
-+ if (pslot && plast->paddr + plast->size == pslot->paddr) {
-+ plast->size += pslot->size;
-+ plast->next = pslot->next;
-+ kmem_cache_free(ocm_piece_cache, pslot);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ocm_inst_alloc()
-+ *
-+ * allocates a block of size in the ocm instrction heap, if
-+ * successful returns address allocated.
-+ */
-+void *ocm_inst_alloc(size_t size, pid_t pid)
-+{
-+ void *addr;
-+
-+ if (!OCM_INST_HEAP_LENGTH)
-+ return NULL;
-+
-+
-+ mutex_lock(&ocm_inst_heap.lock);
-+
-+ addr = _ocm_alloc(size, pid, &ocm_inst_heap);
-+
-+ mutex_unlock(&ocm_inst_heap.lock);
-+
-+ return addr;
-+}
-+EXPORT_SYMBOL(ocm_inst_alloc);
-+
-+/*
-+ * ocm_inst_free()
-+ * free a block in the ocm instrction heap, returns 0 if successful.
-+ */
-+int ocm_inst_free(const void *addr)
-+{
-+ int ret;
-+
-+ if (!OCM_INST_HEAP_LENGTH)
-+ return -1;
-+
-+ mutex_lock(&ocm_inst_heap.lock);
-+
-+ ret = _ocm_free(addr, &ocm_inst_heap);
-+
-+ mutex_unlock(&ocm_inst_heap.lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(ocm_inst_free);
-+
-+/*
-+ * ocm_free()
-+ * free a block in one of the ocm heaps, returns 0 if successful.
-+ */
-+int ocm_free(const void *addr)
-+{
-+ if (addr >= (void *)OCM_INST_HEAP_BEGIN
-+ && addr < (void *)(OCM_INST_HEAP_END))
-+ return ocm_inst_free(addr);
-+ else
-+ return -1;
-+}
-+EXPORT_SYMBOL(ocm_free);
-+
-+
-+#ifdef CONFIG_PROC_FS
-+/* Need to keep line of output the same. Currently, that is 46 bytes
-+ * (including newline).
-+ */
-+static int _ocm_proc_read(char *buf, int *len, int count, const char *desc,
-+ struct ocm_heap *ocmheap)
-+{
-+ struct ocm_piece *pslot;
-+ struct ocm_piece *pfree_head = &ocmheap->free_head;
-+ struct ocm_piece *pused_head = &ocmheap->used_head;
-+
-+ /* The format is the following
-+ * --- OCM 123456789012345 Size PID State \n
-+ * 12345678-12345678 1234567890 12345 1234567890\n
-+ */
-+ int l;
-+ l = sprintf(&buf[*len], "--- OCM %-15s Size PID State \n",
-+ desc);
-+
-+ *len += l;
-+ count -= l;
-+
-+ mutex_lock(&ocm_inst_heap.lock);
-+
-+ /*
-+ * search the relevant memory slot
-+ */
-+ pslot = pused_head->next;
-+
-+ while (pslot != NULL && count > 46) {
-+ l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
-+ pslot->paddr, pslot->paddr + pslot->size,
-+ pslot->size, pslot->pid, "ALLOCATED");
-+
-+ *len += l;
-+ count -= l;
-+ pslot = pslot->next;
-+ }
-+
-+ pslot = pfree_head->next;
-+
-+ while (pslot != NULL && count > 46) {
-+ l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
-+ pslot->paddr, pslot->paddr + pslot->size,
-+ pslot->size, pslot->pid, "FREE");
-+
-+ *len += l;
-+ count -= l;
-+ pslot = pslot->next;
-+ }
-+
-+ mutex_unlock(&ocm_inst_heap.lock);
-+
-+ return 0;
-+}
-+
-+static int ocm_proc_read(char *buf, char **start, off_t offset, int count,
-+ int *eof, void *data)
-+{
-+ int len = 0;
-+
-+ len = sprintf(&buf[len], "--- OCM SKB usage (max RX buf %d)\n"
-+ "(SKB in OCM) %d - (SKB in DDR) %d\n",
-+ ubi32_ocm_skbuf_max,
-+ ubi32_ocm_skbuf,
-+ ubi32_ddr_skbuf);
-+
-+ len += sprintf(&buf[len], "--- OCM Data Heap Size\n"
-+ "%p-%p %10i\n",
-+ ((void *)&__ocm_free_begin),
-+ ((void *)&__ocm_free_end),
-+ ((unsigned int)&__ocm_free_end) -
-+ ((unsigned int)&__ocm_free_begin));
-+
-+ if (_ocm_proc_read(buf, &len, count - len, "Inst Heap",
-+ &ocm_inst_heap))
-+ goto not_done;
-+ *eof = 1;
-+ not_done:
-+ return len;
-+}
-+
-+static int ocm_proc_write(struct file *file, const char __user *buffer,
-+ unsigned long count, void *data)
-+{
-+ int n, v;
-+ char in[8];
-+
-+ if (count > sizeof(in))
-+ return -EINVAL;
-+
-+ if (copy_from_user(in, buffer, count))
-+ return -EFAULT;
-+ in[count-1] = 0;
-+
-+ printk(KERN_INFO "OCM skb alloc max = %s\n", in);
-+
-+ n = 0;
-+ v = 0;
-+ while ((in[n] >= '0') && (in[n] <= '9')) {
-+ v = v * 10 + (int)(in[n] - '0');
-+ n++;
-+ }
-+
-+ if (v == 0)
-+ return -EINVAL;
-+
-+ ubi32_ocm_skbuf_max = v;
-+ ubi32_ocm_skbuf = ubi32_ddr_skbuf = 0;
-+
-+ return count;
-+}
-+
-+static int __init sram_proc_init(void)
-+{
-+ struct proc_dir_entry *ptr;
-+ ptr = create_proc_entry("ocm", S_IFREG | S_IRUGO, NULL);
-+ if (!ptr) {
-+ printk(KERN_WARNING "unable to create /proc/ocm\n");
-+ return -1;
-+ }
-+ ptr->read_proc = ocm_proc_read;
-+ ptr->write_proc = ocm_proc_write;
-+ return 0;
-+}
-+late_initcall(sram_proc_init);
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/oprofile/ipProf.h linux-2.6.30.10-ubi/arch/ubicom32/oprofile/ipProf.h
---- linux-2.6.30.10/arch/ubicom32/oprofile/ipProf.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/oprofile/ipProf.h 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,39 @@
-+#ifndef __IP_PROF_H__
-+#define __IP_PROF_H__
-+
-+/* This number MUST match what is used in the ultra configuration! */
-+#define IPPROFILETIO_MAX_SAMPLES 600
-+
-+/* Move to .h file used in both; avoid special types */
-+struct profile_sample {
-+ unsigned int pc; /* PC value */
-+ unsigned int parent; /* a5 contents, to find the caller */
-+ unsigned char cond_codes; /* for branch prediction */
-+ unsigned char thread; /* I-blocked, D-blocked,
-+ 4-bit thread number */
-+ unsigned short active; /* which threads are active -
-+ for accurate counting */
-+ unsigned short blocked; /* which threads are blocked due to
-+ I or D cache misses */
-+ unsigned int latency; /* CPU clocks since the last message
-+ dispatch in this thread
-+ (thread 0 only for now) */
-+};
-+
-+
-+struct profilenode {
-+ struct devtree_node dn;
-+ volatile unsigned char enabled; /* Is the tio enabled to
-+ take samples? */
-+ volatile unsigned char busy; /* set when the samples
-+ are being read */
-+ volatile unsigned int mask; /* Threads that change the MT_EN flag */
-+ volatile unsigned short rate; /* What is the sampling rate? */
-+ volatile unsigned short head; /* sample taker puts samples here */
-+ volatile unsigned short tail; /* packet filler takes samples here */
-+ volatile unsigned short count; /* number of valid samples */
-+ volatile unsigned short total; /* Total samples */
-+ struct profile_sample samples[IPPROFILETIO_MAX_SAMPLES];
-+};
-+
-+#endif
-diff -ruN linux-2.6.30.10/arch/ubicom32/oprofile/Makefile linux-2.6.30.10-ubi/arch/ubicom32/oprofile/Makefile
---- linux-2.6.30.10/arch/ubicom32/oprofile/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/oprofile/Makefile 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,37 @@
-+#
-+# arch/ubicom32/Makefile
-+# Makefile for Oprofile support on Ubicom32
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+obj-$(CONFIG_OPROFILE) += oprofile.o
-+
-+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-+ oprof.o cpu_buffer.o buffer_sync.o \
-+ event_buffer.o oprofile_files.o \
-+ oprofilefs.o oprofile_stats.o \
-+ timer_int.o )
-+
-+oprofile-y := $(DRIVER_OBJS) profile.o
-diff -ruN linux-2.6.30.10/arch/ubicom32/oprofile/profile.c linux-2.6.30.10-ubi/arch/ubicom32/oprofile/profile.c
---- linux-2.6.30.10/arch/ubicom32/oprofile/profile.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/arch/ubicom32/oprofile/profile.c 2009-12-11 11:45:11.000000000 +0200
-@@ -0,0 +1,221 @@
-+/*
-+ * arch/ubicom32/oprofile/profile.c
-+ * Oprofile support for arch Ubicom32
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option)
-+ * any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it will
-+ * be useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not, see
-+ * <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+/**
-+ * @file profile.c
-+ *
-+ * @remark Copyright 2002 OProfile authors
-+ * @remark Read the file COPYING
-+ *
-+ * @author Hunyue Yau <hy@hy-research.com>
-+ */
-+
-+#include <linux/oprofile.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/devtree.h>
-+#include <asm/thread.h>
-+
-+/* For identifying userland vs kernel address */
-+#include <asm/stacktrace.h>
-+#include "ipProf.h"
-+
-+/* For communications with the backend */
-+static struct profilenode *profile_node;
-+
-+/* Bitmask containing all Linux threads - as seen by the ROSR reg */
-+static unsigned long th_all_mask;
-+
-+/* Lookup table to translate a hardware thread into a CPU identifier
-+ * Table is indexed by the ROSR value which is assumed to be
-+ * relatively small (0...15).
-+ */
-+unsigned int cpu_map[THREAD_ARCHITECTURAL_MAX];
-+
-+static struct pt_regs regs;
-+
-+/*
-+ * For each sample returned, checked to see if they are relevant to
-+ * us. This is necessary as the ubicom32 architecture has other software
-+ * running outside of Linux. Only then, put the sample into the relevant
-+ * cpu bins.
-+ *
-+ * To minimize overhead, a global mask with all possible threads of in
-+ * interest to us is used as a first check. Then a second mask identifying
-+ * the thread is used to obtain an identifier for that "CPU".
-+ */
-+
-+/*
-+ * ubicom32_build_cpu_th_mask()
-+ *
-+ * Build a lookup table for translation between hardware thread
-+ * "ROSR" values and Linux CPU ids
-+ *
-+ * *** This gets executed on all CPUs at once! ***
-+ */
-+static void ubicom32_build_cpu_th_mask(void *mask)
-+{
-+ thread_t self = thread_get_self();
-+ unsigned long *th_m = mask;
-+
-+ BUG_ON(self <= 0 || self >= THREAD_ARCHITECTURAL_MAX);
-+ cpu_map[self] = smp_processor_id();
-+
-+ set_bit(self, th_m);
-+}
-+
-+/*
-+ * profile_interrupt()
-+ *
-+ * Process samples returned from the profiler backend. The backend
-+ * may return samples that are irrelevant to us or may even return
-+ * multiple samples for the same CPU. Note that the sames may be
-+ * for ANY cpu. At this time, this is unique and to support this requires
-+ * Oprofile to expose an interface to accept the CPU that the same came
-+ * frome.
-+ */
-+static irqreturn_t profile_interrupt(int irq, void *arg)
-+{
-+ int i, buf_entry;
-+ int is_kernel;
-+ unsigned int bit_th;
-+ unsigned int th;
-+
-+ if (!(profile_node->enabled) || profile_node->count < 0) {
-+ printk(KERN_WARNING
-+ "Unexpected interrupt, no samples or not enabled!\n");
-+ return IRQ_HANDLED;
-+ }
-+
-+ profile_node->busy = 1; /* Keep backend out */
-+
-+ for (i = 0; i < profile_node->count; i++) {
-+ buf_entry = profile_node->tail;
-+ profile_node->tail++;
-+ profile_node->tail %= IPPROFILETIO_MAX_SAMPLES;
-+
-+ /* Note - the "thread" ID is only the lower 4 bits */
-+ th = (0x0f & profile_node->samples[buf_entry].thread);
-+ bit_th = (1 << th);
-+
-+ if ((bit_th & th_all_mask) == 0)
-+ continue;
-+
-+ regs.pc = profile_node->samples[buf_entry].pc;
-+
-+ is_kernel = ubicom32_is_kernel(regs.pc);
-+
-+ oprofile_add_ext_sample_cpu(regs.pc, ®s, 0, is_kernel,
-+ cpu_map[th]);
-+ }
-+ profile_node->count = 0;
-+ profile_node->busy = 0;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * profile_start()
-+ *
-+ * Notification from oprofile to start the profiler
-+ */
-+static int profile_start(void)
-+{
-+ if (!profile_node)
-+ return -1;
-+
-+ profile_node->enabled = 1;
-+
-+ return 0;
-+}
-+
-+/*
-+ * profile_stop()
-+ *
-+ * Notification from oprofile to stop the profiler
-+ */
-+static void profile_stop(void)
-+{
-+ if (profile_node)
-+ profile_node->enabled = 0;
-+}
-+
-+/*
-+ * oprofile_arch_init()
-+ *
-+ * Attach to Oprofile after qualify the availability of the backend
-+ * profiler support.
-+ */
-+int __init oprofile_arch_init(struct oprofile_operations *ops)
-+{
-+ int r = -ENODEV;
-+
-+ profile_node = (struct profilenode *)devtree_find_node("profiler");
-+
-+ if (profile_node == NULL) {
-+ printk(KERN_WARNING "Cannot find profiler node\n");
-+ return r;
-+ }
-+
-+ r = request_irq(profile_node->dn.recvirq, profile_interrupt,
-+ IRQF_DISABLED, "profiler", NULL);
-+
-+ if (r < 0) {
-+ profile_node = NULL;
-+ printk(KERN_WARNING "Cannot get profiler IRQ\n");
-+ return r;
-+ }
-+
-+ ops->start = profile_start;
-+ ops->stop = profile_stop;
-+ ops->cpu_type = "timer";
-+
-+ memset(cpu_map, 0, sizeof(cpu_map));
-+
-+ on_each_cpu(ubicom32_build_cpu_th_mask, &th_all_mask, 1);
-+
-+ memset(®s, 0, sizeof(regs));
-+
-+ return r;
-+}
-+
-+/*
-+ * oprofile_arch_exit()
-+ *
-+ * External call to take outselves out.
-+ * Make sure backend is not running.
-+ */
-+void oprofile_arch_exit(void)
-+{
-+ BUG_ON(profile_node->enabled);
-+}
-diff -ruN linux-2.6.30.10/drivers/char/hw_random/Kconfig linux-2.6.30.10-ubi/drivers/char/hw_random/Kconfig
---- linux-2.6.30.10/drivers/char/hw_random/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/char/hw_random/Kconfig 2009-12-11 11:45:13.000000000 +0200
-@@ -148,3 +148,16 @@
-
- To compile this driver as a module, choose M here: the
- module will be called virtio-rng. If unsure, say N.
-+
-+config HW_RANDOM_UBICOM32
-+ tristate "Ubicom32 HW Random Number Generator support"
-+ depends on HW_RANDOM && UBICOM32
-+ default HW_RANDOM
-+ ---help---
-+ This driver provides kernel-side support for the Random Number
-+ Generator hardware found on Ubicom32 processors.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called pasemi-rng.
-+
-+ If unsure, say Y.
-diff -ruN linux-2.6.30.10/drivers/char/hw_random/Makefile linux-2.6.30.10-ubi/drivers/char/hw_random/Makefile
---- linux-2.6.30.10/drivers/char/hw_random/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/char/hw_random/Makefile 2009-12-11 11:45:13.000000000 +0200
-@@ -15,3 +15,4 @@
- obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
- obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
- obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
-+obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
-diff -ruN linux-2.6.30.10/drivers/char/hw_random/ubicom32-rng.c linux-2.6.30.10-ubi/drivers/char/hw_random/ubicom32-rng.c
---- linux-2.6.30.10/drivers/char/hw_random/ubicom32-rng.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/char/hw_random/ubicom32-rng.c 2009-12-11 11:45:13.000000000 +0200
-@@ -0,0 +1,105 @@
-+/*
-+ * drivers/net/ubi32-eth.c
-+ * Ubicom32 hardware random number generator driver.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/hw_random.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/ip5000.h>
-+
-+#define MODULE_NAME "ubicom32_rng"
-+
-+static int ubicom32_rng_data_present(struct hwrng *rng, int wait)
-+{
-+ int data, i;
-+
-+ for (i = 0; i < 20; i++) {
-+ data = *(int *)(TIMER_BASE + TIMER_TRN);
-+ if (data || !wait)
-+ break;
-+ udelay(10);
-+ }
-+ return data;
-+}
-+
-+static int ubicom32_rng_data_read(struct hwrng *rng, u32 *data)
-+{
-+ *data = *(int *)(TIMER_BASE + TIMER_TRN);
-+ return 4;
-+}
-+
-+static int ubicom32_rng_init(struct hwrng *rng)
-+{
-+ printk(KERN_INFO "ubicom32 rng init\n");
-+ *(int *)(TIMER_BASE + TIMER_TRN_CFG) = TIMER_TRN_CFG_ENABLE_OSC;
-+ return 0;
-+}
-+
-+static void ubicom32_rng_cleanup(struct hwrng *rng)
-+{
-+ printk(KERN_INFO "ubicom32 rng cleanup\n");
-+ *(int *)(TIMER_BASE + TIMER_TRN_CFG) = 0;
-+}
-+
-+static struct hwrng ubicom32_rng = {
-+ .name = MODULE_NAME,
-+ .init = ubicom32_rng_init,
-+ .cleanup = ubicom32_rng_cleanup,
-+ .data_present = ubicom32_rng_data_present,
-+ .data_read = ubicom32_rng_data_read,
-+ .priv = 0,
-+};
-+
-+static int __init mod_init(void)
-+{
-+ int err;
-+
-+ printk(KERN_INFO "ubicom32 rng started\n");
-+ err = hwrng_register(&ubicom32_rng);
-+ if (err) {
-+ printk(KERN_ERR "ubicom32 rng register failed (%d)\n",
-+ err);
-+ }
-+
-+ return err;
-+}
-+
-+static void __exit mod_exit(void)
-+{
-+ printk(KERN_INFO "ubicom32 rng stopped\n");
-+ hwrng_unregister(&ubicom32_rng);
-+}
-+
-+module_init(mod_init);
-+module_exit(mod_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ubicom, Inc.");
-+MODULE_DESCRIPTION("H/W rng driver for ubicom32 processor");
-+MODULE_VERSION("1:1.0.a");
-diff -ruN linux-2.6.30.10/drivers/crypto/Kconfig linux-2.6.30.10-ubi/drivers/crypto/Kconfig
---- linux-2.6.30.10/drivers/crypto/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/crypto/Kconfig 2009-12-11 11:45:13.000000000 +0200
-@@ -61,6 +61,40 @@
- To compile this driver as a module, choose M here: the module
- will be called geode-aes.
-
-+config CRYPTO_UBICOM32
-+ bool "Ubicom32 Security Module"
-+ depends on UBICOM32
-+ help
-+ This is the ubicom32 hardware acceleration common code.
-+
-+config CRYPTO_AES_UBICOM32
-+ tristate "Ubicom32 AES implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware AES implementation.
-+
-+config CRYPTO_DES_UBICOM32
-+ tristate "Ubicom32 DES implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware DES and 3DES implementation.
-+
-+config CRYPTO_SHA1_UBICOM32
-+ tristate "Ubicom32 SHA1 implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware SHA1 implementation.
-+
-+config CRYPTO_MD5_UBICOM32
-+ tristate "Ubicom32 MD5 implementation"
-+ depends on CRYPTO_UBICOM32
-+ select CRYPTO_ALGAPI
-+ help
-+ This is the ubicom32 hardware MD5 implementation.
-+
- config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- depends on S390
-diff -ruN linux-2.6.30.10/drivers/mmc/host/Kconfig linux-2.6.30.10-ubi/drivers/mmc/host/Kconfig
---- linux-2.6.30.10/drivers/mmc/host/Kconfig 2009-12-14 11:15:33.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mmc/host/Kconfig 2009-12-14 11:15:31.000000000 +0200
-@@ -266,3 +266,10 @@
- help
- This option automatically enables configfs support for gpiommc
- if configfs is available.
-+
-+config MMC_UBICOM32
-+ tristate "Ubicom32 MMC/SD host controller"
-+ depends on UBICOM32
-+ help
-+ This provides support for the SD/MMC hardware found on Ubicom32
-+ IP7K processors
-diff -ruN linux-2.6.30.10/drivers/mmc/host/Makefile linux-2.6.30.10-ubi/drivers/mmc/host/Makefile
---- linux-2.6.30.10/drivers/mmc/host/Makefile 2009-12-14 11:37:36.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mmc/host/Makefile 2009-12-14 11:37:35.000000000 +0200
-@@ -30,4 +30,5 @@
- obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
- obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
- obj-$(CONFIG_GPIOMMC) += gpiommc.o
-+obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
-
-diff -ruN linux-2.6.30.10/drivers/mmc/host/ubicom32sd.c linux-2.6.30.10-ubi/drivers/mmc/host/ubicom32sd.c
---- linux-2.6.30.10/drivers/mmc/host/ubicom32sd.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mmc/host/ubicom32sd.c 2009-12-11 11:45:16.000000000 +0200
-@@ -0,0 +1,773 @@
-+/*
-+ * drivers/mmc/host/ubicom32sd.c
-+ * Ubicom32 Secure Digital Host Controller Interface driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/scatterlist.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include <linux/mmc/host.h>
-+
-+#include <asm/ubicom32sd.h>
-+
-+#define DRIVER_NAME "ubicom32sd"
-+
-+#define sd_printk(...)
-+//#define sd_printk printk
-+
-+#define SDTIO_VP_VERSION 3
-+
-+#define SDTIO_MAX_SG_BLOCKS 16
-+
-+enum sdtio_commands {
-+ SDTIO_COMMAND_NOP,
-+ SDTIO_COMMAND_SETUP,
-+ SDTIO_COMMAND_SETUP_SDIO,
-+ SDTIO_COMMAND_EXECUTE,
-+ SDTIO_COMMAND_RESET,
-+};
-+
-+#define SDTIO_COMMAND_SHIFT 24
-+#define SDTIO_COMMAND_FLAG_STOP_RSP_CRC (1 << 10)
-+#define SDTIO_COMMAND_FLAG_STOP_RSP_136 (1 << 9)
-+#define SDTIO_COMMAND_FLAG_STOP_RSP (1 << 8)
-+#define SDTIO_COMMAND_FLAG_STOP_CMD (1 << 7)
-+#define SDTIO_COMMAND_FLAG_DATA_STREAM (1 << 6)
-+#define SDTIO_COMMAND_FLAG_DATA_RD (1 << 5)
-+#define SDTIO_COMMAND_FLAG_DATA_WR (1 << 4)
-+#define SDTIO_COMMAND_FLAG_CMD_RSP_CRC (1 << 3)
-+#define SDTIO_COMMAND_FLAG_CMD_RSP_136 (1 << 2)
-+#define SDTIO_COMMAND_FLAG_CMD_RSP (1 << 1)
-+#define SDTIO_COMMAND_FLAG_CMD (1 << 0)
-+
-+/*
-+ * SDTIO_COMMAND_SETUP_SDIO
-+ */
-+#define SDTIO_COMMAND_FLAG_SDIO_INT_EN (1 << 0)
-+
-+/*
-+ * SDTIO_COMMAND_SETUP
-+ * clock speed in arg
-+ */
-+#define SDTIO_COMMAND_FLAG_4BIT (1 << 3)
-+#define SDTIO_COMMAND_FLAG_1BIT (1 << 2)
-+#define SDTIO_COMMAND_FLAG_SET_CLOCK (1 << 1)
-+#define SDTIO_COMMAND_FLAG_SET_WIDTH (1 << 0)
-+
-+#define SDTIO_COMMAND_FLAG_CMD_RSP_MASK (SDTIO_COMMAND_FLAG_CMD_RSP | SDTIO_COMMAND_FLAG_CMD_RSP_136)
-+#define SDTIO_COMMAND_FLAG_STOP_RSP_MASK (SDTIO_COMMAND_FLAG_STOP_RSP | SDTIO_COMMAND_FLAG_STOP_RSP_136)
-+#define SDTIO_COMMAND_FLAG_RSP_MASK (SDTIO_COMMAND_FLAG_CMD_RSP_MASK | SDTIO_COMMAND_FLAG_STOP_RSP_MASK)
-+
-+struct sdtio_vp_sg {
-+ volatile void *addr;
-+ volatile u32_t len;
-+};
-+
-+#define SDTIO_VP_INT_STATUS_DONE (1 << 31)
-+#define SDTIO_VP_INT_STATUS_SDIO_INT (1 << 10)
-+#define SDTIO_VP_INT_STATUS_DATA_CRC_ERR (1 << 9)
-+#define SDTIO_VP_INT_STATUS_DATA_PROG_ERR (1 << 8)
-+#define SDTIO_VP_INT_STATUS_DATA_TIMEOUT (1 << 7)
-+#define SDTIO_VP_INT_STATUS_STOP_RSP_CRC (1 << 6)
-+#define SDTIO_VP_INT_STATUS_STOP_RSP_TIMEOUT (1 << 5)
-+#define SDTIO_VP_INT_STATUS_CMD_RSP_CRC (1 << 4)
-+#define SDTIO_VP_INT_STATUS_CMD_RSP_TIMEOUT (1 << 3)
-+#define SDTIO_VP_INT_STATUS_CMD_TIMEOUT (1 << 2)
-+#define SDTIO_VP_INT_STATUS_CARD1_INSERT (1 << 1)
-+#define SDTIO_VP_INT_STATUS_CARD0_INSERT (1 << 0)
-+
-+struct sdtio_vp_regs {
-+ u32_t version;
-+ u32_t f_max;
-+ u32_t f_min;
-+
-+ volatile u32_t int_status;
-+
-+ volatile u32_t command;
-+ volatile u32_t arg;
-+
-+ volatile u32_t cmd_opcode;
-+ volatile u32_t cmd_arg;
-+ volatile u32_t cmd_rsp0;
-+ volatile u32_t cmd_rsp1;
-+ volatile u32_t cmd_rsp2;
-+ volatile u32_t cmd_rsp3;
-+
-+ volatile u32_t stop_opcode;
-+ volatile u32_t stop_arg;
-+ volatile u32_t stop_rsp0;
-+ volatile u32_t stop_rsp1;
-+ volatile u32_t stop_rsp2;
-+ volatile u32_t stop_rsp3;
-+
-+ volatile u32_t data_timeout_ns;
-+ volatile u16_t data_blksz;
-+ volatile u16_t data_blkct;
-+ volatile u32_t data_bytes_transferred;
-+ volatile u32_t sg_len;
-+ struct sdtio_vp_sg sg[SDTIO_MAX_SG_BLOCKS];
-+};
-+
-+struct ubicom32sd_data {
-+ const struct ubicom32sd_platform_data *pdata;
-+
-+ struct mmc_host *mmc;
-+
-+ /*
-+ * Lock used to protect the data structure
-+ spinlock_t lock;
-+ */
-+ int int_en;
-+ int int_pend;
-+
-+ /*
-+ * Receive and transmit interrupts used for communicating
-+ * with hardware
-+ */
-+ int irq_tx;
-+ int irq_rx;
-+
-+ /*
-+ * Current outstanding mmc request
-+ */
-+ struct mmc_request *mrq;
-+
-+ /*
-+ * Hardware registers
-+ */
-+ struct sdtio_vp_regs *regs;
-+};
-+
-+/*****************************************************************************\
-+ * *
-+ * Suspend/resume *
-+ * *
-+\*****************************************************************************/
-+
-+#if 0//def CONFIG_PM
-+
-+int ubicom32sd_suspend_host(struct ubicom32sd_host *host, pm_message_t state)
-+{
-+ int ret;
-+
-+ ret = mmc_suspend_host(host->mmc, state);
-+ if (ret)
-+ return ret;
-+
-+ free_irq(host->irq, host);
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL_GPL(ubicom32sd_suspend_host);
-+
-+int ubicom32sd_resume_host(struct ubicom32sd_host *host)
-+{
-+ int ret;
-+
-+ if (host->flags & UBICOM32SD_USE_DMA) {
-+ if (host->ops->enable_dma)
-+ host->ops->enable_dma(host);
-+ }
-+
-+ ret = request_irq(host->irq, ubicom32sd_irq, IRQF_SHARED,
-+ mmc_hostname(host->mmc), host);
-+ if (ret)
-+ return ret;
-+
-+ ubicom32sd_init(host);
-+ mmiowb();
-+
-+ ret = mmc_resume_host(host->mmc);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL_GPL(ubicom32sd_resume_host);
-+
-+#endif /* CONFIG_PM */
-+
-+/*
-+ * ubicom32sd_send_command_sync
-+ */
-+static void ubicom32sd_send_command_sync(struct ubicom32sd_data *ud, u32_t command, u32_t arg)
-+{
-+ ud->regs->command = command;
-+ ud->regs->arg = arg;
-+ ubicom32_set_interrupt(ud->irq_tx);
-+ while (ud->regs->command) {
-+ ndelay(100);
-+ }
-+}
-+
-+/*
-+ * ubicom32sd_send_command
-+ */
-+static void ubicom32sd_send_command(struct ubicom32sd_data *ud, u32_t command, u32_t arg)
-+{
-+ ud->regs->command = command;
-+ ud->regs->arg = arg;
-+ ubicom32_set_interrupt(ud->irq_tx);
-+}
-+
-+/*
-+ * ubicom32sd_reset
-+ */
-+static void ubicom32sd_reset(struct ubicom32sd_data *ud)
-+{
-+ ubicom32sd_send_command_sync(ud, SDTIO_COMMAND_RESET << SDTIO_COMMAND_SHIFT, 0);
-+ ud->regs->int_status = 0;
-+}
-+
-+/*
-+ * ubicom32sd_mmc_request
-+ */
-+static void ubicom32sd_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+ u32_t command = SDTIO_COMMAND_EXECUTE << SDTIO_COMMAND_SHIFT;
-+ int ret = 0;
-+
-+ WARN(ud->mrq != NULL, "ud->mrq still set to %p\n", ud->mrq);
-+ //pr_debug("send cmd %08x arg %08x flags %08x\n", cmd->opcode, cmd->arg, cmd->flags);
-+
-+ if (mrq->cmd) {
-+ struct mmc_command *cmd = mrq->cmd;
-+
-+ sd_printk("%s:\t\t\tsetup cmd %02d arg %08x flags %08x\n", mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags);
-+
-+ ud->regs->cmd_opcode = cmd->opcode;
-+ ud->regs->cmd_arg = cmd->arg;
-+
-+ command |= SDTIO_COMMAND_FLAG_CMD;
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ command |= SDTIO_COMMAND_FLAG_CMD_RSP;
-+ }
-+
-+ if (cmd->flags & MMC_RSP_136) {
-+ command |= SDTIO_COMMAND_FLAG_CMD_RSP_136;
-+ }
-+
-+ if (cmd->flags & MMC_RSP_CRC) {
-+ command |= SDTIO_COMMAND_FLAG_CMD_RSP_CRC;
-+ }
-+ }
-+
-+ if (mrq->data) {
-+ struct mmc_data *data = mrq->data;
-+ struct scatterlist *sg = data->sg;
-+ int i;
-+
-+printk("%s:\t\t\tsetup data blksz %d num %d sglen=%d fl=%08x Tns=%u\n", mmc_hostname(mmc), data->blksz, data->blocks, data->sg_len, data->flags, data->timeout_ns);
-+
-+ sd_printk("%s:\t\t\tsetup data blksz %d num %d sglen=%d fl=%08x Tns=%u\n",
-+ mmc_hostname(mmc), data->blksz, data->blocks, data->sg_len,
-+ data->flags, data->timeout_ns);
-+
-+ if (data->sg_len > SDTIO_MAX_SG_BLOCKS) {
-+ ret = -EINVAL;
-+ data->error = -EINVAL;
-+ goto fail;
-+ }
-+
-+ ud->regs->data_timeout_ns = data->timeout_ns;
-+ ud->regs->data_blksz = data->blksz;
-+ ud->regs->data_blkct = data->blocks;
-+ ud->regs->sg_len = data->sg_len;
-+
-+ /*
-+ * Load all of our sg list into the driver sg buffer
-+ */
-+ for (i = 0; i < data->sg_len; i++) {
-+ sd_printk("%s: sg %d = %p %d\n", mmc_hostname(mmc), i, sg_virt(sg), sg->length);
-+ ud->regs->sg[i].addr = sg_virt(sg);
-+ ud->regs->sg[i].len = sg->length;
-+ if (((u32_t)ud->regs->sg[i].addr & 0x03) || (sg->length & 0x03)) {
-+ sd_printk("%s: Need aligned buffers\n", mmc_hostname(mmc));
-+ ret = -EINVAL;
-+ data->error = -EINVAL;
-+ goto fail;
-+ }
-+ sg++;
-+ }
-+ if (data->flags & MMC_DATA_READ) {
-+ command |= SDTIO_COMMAND_FLAG_DATA_RD;
-+ } else if (data->flags & MMC_DATA_WRITE) {
-+ command |= SDTIO_COMMAND_FLAG_DATA_WR;
-+ } else if (data->flags & MMC_DATA_STREAM) {
-+ command |= SDTIO_COMMAND_FLAG_DATA_STREAM;
-+ }
-+ }
-+
-+ if (mrq->stop) {
-+ struct mmc_command *stop = mrq->stop;
-+ sd_printk("%s: \t\t\tsetup stop %02d arg %08x flags %08x\n", mmc_hostname(mmc), stop->opcode, stop->arg, stop->flags);
-+
-+ ud->regs->stop_opcode = stop->opcode;
-+ ud->regs->stop_arg = stop->arg;
-+
-+ command |= SDTIO_COMMAND_FLAG_STOP_CMD;
-+
-+ if (stop->flags & MMC_RSP_PRESENT) {
-+ command |= SDTIO_COMMAND_FLAG_STOP_RSP;
-+ }
-+
-+ if (stop->flags & MMC_RSP_136) {
-+ command |= SDTIO_COMMAND_FLAG_STOP_RSP_136;
-+ }
-+
-+ if (stop->flags & MMC_RSP_CRC) {
-+ command |= SDTIO_COMMAND_FLAG_STOP_RSP_CRC;
-+ }
-+ }
-+
-+ ud->mrq = mrq;
-+
-+ sd_printk("%s: Sending command %08x\n", mmc_hostname(mmc), command);
-+
-+ ubicom32sd_send_command(ud, command, 0);
-+
-+ return;
-+fail:
-+ sd_printk("%s: mmcreq ret = %d\n", mmc_hostname(mmc), ret);
-+ mrq->cmd->error = ret;
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+/*
-+ * ubicom32sd_mmc_set_ios
-+ */
-+static void ubicom32sd_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+ u32_t command = SDTIO_COMMAND_SETUP << SDTIO_COMMAND_SHIFT;
-+ u32_t arg = 0;
-+ sd_printk("%s: ios call bw:%u pm:%u clk:%u\n", mmc_hostname(mmc), 1 << ios->bus_width, ios->power_mode, ios->clock);
-+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ command |= SDTIO_COMMAND_FLAG_SET_WIDTH | SDTIO_COMMAND_FLAG_1BIT;
-+ break;
-+
-+ case MMC_BUS_WIDTH_4:
-+ command |= SDTIO_COMMAND_FLAG_SET_WIDTH | SDTIO_COMMAND_FLAG_4BIT;
-+ break;
-+ }
-+
-+ if (ios->clock) {
-+ arg = ios->clock;
-+ command |= SDTIO_COMMAND_FLAG_SET_CLOCK;
-+ }
-+
-+ switch (ios->power_mode) {
-+
-+ /*
-+ * Turn off the SD bus (power + clock)
-+ */
-+ case MMC_POWER_OFF:
-+ gpio_set_value(ud->pdata->cards[0].pin_pwr, !ud->pdata->cards[0].pwr_polarity);
-+ command |= SDTIO_COMMAND_FLAG_SET_CLOCK;
-+ break;
-+
-+ /*
-+ * Turn on the power to the SD bus
-+ */
-+ case MMC_POWER_ON:
-+ gpio_set_value(ud->pdata->cards[0].pin_pwr, ud->pdata->cards[0].pwr_polarity);
-+ break;
-+
-+ /*
-+ * Turn on the clock to the SD bus
-+ */
-+ case MMC_POWER_UP:
-+ /*
-+ * Done above
-+ */
-+ break;
-+ }
-+
-+ ubicom32sd_send_command_sync(ud, command, arg);
-+
-+ /*
-+ * Let the power settle down
-+ */
-+ udelay(500);
-+}
-+
-+/*
-+ * ubicom32sd_mmc_get_cd
-+ */
-+static int ubicom32sd_mmc_get_cd(struct mmc_host *mmc)
-+{
-+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+ sd_printk("%s: get cd %u %u\n", mmc_hostname(mmc), ud->pdata->cards[0].pin_cd, gpio_get_value(ud->pdata->cards[0].pin_cd));
-+
-+ return gpio_get_value(ud->pdata->cards[0].pin_cd) ?
-+ ud->pdata->cards[0].cd_polarity :
-+ !ud->pdata->cards[0].cd_polarity;
-+}
-+
-+/*
-+ * ubicom32sd_mmc_get_ro
-+ */
-+static int ubicom32sd_mmc_get_ro(struct mmc_host *mmc)
-+{
-+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+ sd_printk("%s: get ro %u %u\n", mmc_hostname(mmc), ud->pdata->cards[0].pin_wp, gpio_get_value(ud->pdata->cards[0].pin_wp));
-+
-+ return gpio_get_value(ud->pdata->cards[0].pin_wp) ?
-+ ud->pdata->cards[0].wp_polarity :
-+ !ud->pdata->cards[0].wp_polarity;
-+}
-+
-+/*
-+ * ubicom32sd_mmc_enable_sdio_irq
-+ */
-+static void ubicom32sd_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
-+{
-+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+
-+ ud->int_en = enable;
-+ if (enable && ud->int_pend) {
-+ ud->int_pend = 0;
-+ mmc_signal_sdio_irq(mmc);
-+ }
-+}
-+
-+/*
-+ * ubicom32sd_interrupt
-+ */
-+static irqreturn_t ubicom32sd_interrupt(int irq, void *dev)
-+{
-+ struct mmc_host *mmc = (struct mmc_host *)dev;
-+ struct mmc_request *mrq;
-+ struct ubicom32sd_data *ud;
-+ u32_t int_status;
-+
-+ if (!mmc) {
-+ return IRQ_HANDLED;
-+ }
-+
-+ ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+ if (!ud) {
-+ return IRQ_HANDLED;
-+ }
-+
-+ int_status = ud->regs->int_status;
-+ ud->regs->int_status &= ~int_status;
-+
-+ if (int_status & SDTIO_VP_INT_STATUS_SDIO_INT) {
-+ if (ud->int_en) {
-+ ud->int_pend = 0;
-+ mmc_signal_sdio_irq(mmc);
-+ } else {
-+ ud->int_pend++;
-+ }
-+ }
-+
-+ if (!(int_status & SDTIO_VP_INT_STATUS_DONE)) {
-+ return IRQ_HANDLED;
-+ }
-+
-+ mrq = ud->mrq;
-+ if (!mrq) {
-+ sd_printk("%s: Spurious interrupt", mmc_hostname(mmc));
-+ return IRQ_HANDLED;
-+ }
-+ ud->mrq = NULL;
-+
-+ /*
-+ * SDTIO_VP_INT_DONE
-+ */
-+ if (mrq->cmd->flags & MMC_RSP_PRESENT) {
-+ struct mmc_command *cmd = mrq->cmd;
-+ cmd->error = 0;
-+
-+ if ((cmd->flags & MMC_RSP_CRC) && (int_status & SDTIO_VP_INT_STATUS_CMD_RSP_CRC)) {
-+ cmd->error = -EILSEQ;
-+ } else if (int_status & SDTIO_VP_INT_STATUS_CMD_RSP_TIMEOUT) {
-+ cmd->error = -ETIMEDOUT;
-+ goto done;
-+ } else if (cmd->flags & MMC_RSP_136) {
-+ cmd->resp[0] = ud->regs->cmd_rsp0;
-+ cmd->resp[1] = ud->regs->cmd_rsp1;
-+ cmd->resp[2] = ud->regs->cmd_rsp2;
-+ cmd->resp[3] = ud->regs->cmd_rsp3;
-+ } else {
-+ cmd->resp[0] = ud->regs->cmd_rsp0;
-+ }
-+ sd_printk("%s:\t\t\tResponse %08x %08x %08x %08x err=%d\n", mmc_hostname(mmc), cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error);
-+ }
-+
-+ if (mrq->data) {
-+ struct mmc_data *data = mrq->data;
-+
-+ if (int_status & SDTIO_VP_INT_STATUS_DATA_TIMEOUT) {
-+ data->error = -ETIMEDOUT;
-+ sd_printk("%s:\t\t\tData Timeout\n", mmc_hostname(mmc));
-+ goto done;
-+ } else if (int_status & SDTIO_VP_INT_STATUS_DATA_CRC_ERR) {
-+ data->error = -EILSEQ;
-+ sd_printk("%s:\t\t\tData CRC\n", mmc_hostname(mmc));
-+ goto done;
-+ } else if (int_status & SDTIO_VP_INT_STATUS_DATA_PROG_ERR) {
-+ data->error = -EILSEQ;
-+ sd_printk("%s:\t\t\tData Program Error\n", mmc_hostname(mmc));
-+ goto done;
-+ } else {
-+ data->error = 0;
-+ data->bytes_xfered = ud->regs->data_bytes_transferred;
-+ }
-+ }
-+
-+ if (mrq->stop && (mrq->stop->flags & MMC_RSP_PRESENT)) {
-+ struct mmc_command *stop = mrq->stop;
-+ stop->error = 0;
-+
-+ if ((stop->flags & MMC_RSP_CRC) && (int_status & SDTIO_VP_INT_STATUS_STOP_RSP_CRC)) {
-+ stop->error = -EILSEQ;
-+ } else if (int_status & SDTIO_VP_INT_STATUS_STOP_RSP_TIMEOUT) {
-+ stop->error = -ETIMEDOUT;
-+ goto done;
-+ } else if (stop->flags & MMC_RSP_136) {
-+ stop->resp[0] = ud->regs->stop_rsp0;
-+ stop->resp[1] = ud->regs->stop_rsp1;
-+ stop->resp[2] = ud->regs->stop_rsp2;
-+ stop->resp[3] = ud->regs->stop_rsp3;
-+ } else {
-+ stop->resp[0] = ud->regs->stop_rsp0;
-+ }
-+ sd_printk("%s:\t\t\tStop Response %08x %08x %08x %08x err=%d\n", mmc_hostname(mmc), stop->resp[0], stop->resp[1], stop->resp[2], stop->resp[3], stop->error);
-+ }
-+
-+done:
-+ mmc_request_done(mmc, mrq);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct mmc_host_ops ubicom32sd_ops = {
-+ .request = ubicom32sd_mmc_request,
-+ .set_ios = ubicom32sd_mmc_set_ios,
-+ .get_ro = ubicom32sd_mmc_get_ro,
-+ .get_cd = ubicom32sd_mmc_get_cd,
-+ .enable_sdio_irq = ubicom32sd_mmc_enable_sdio_irq,
-+};
-+
-+/*
-+ * ubicom32sd_probe
-+ */
-+static int __devinit ubicom32sd_probe(struct platform_device *pdev)
-+{
-+ struct ubicom32sd_platform_data *pdata = (struct ubicom32sd_platform_data *)pdev->dev.platform_data;
-+ struct mmc_host *mmc;
-+ struct ubicom32sd_data *ud;
-+ struct resource *res_regs;
-+ struct resource *res_irq_tx;
-+ struct resource *res_irq_rx;
-+ int ret;
-+
-+ /*
-+ * Get our resources, regs is the hardware driver base address
-+ * and the tx and rx irqs are used to communicate with the
-+ * hardware driver.
-+ */
-+ res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-+ if (!res_regs || !res_irq_tx || !res_irq_rx) {
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Reserve any gpios we need
-+ */
-+ ret = gpio_request(pdata->cards[0].pin_wp, "sd-wp");
-+ if (ret) {
-+ goto fail;
-+ }
-+ gpio_direction_input(pdata->cards[0].pin_wp);
-+
-+ ret = gpio_request(pdata->cards[0].pin_cd, "sd-cd");
-+ if (ret) {
-+ goto fail_cd;
-+ }
-+ gpio_direction_input(pdata->cards[0].pin_cd);
-+
-+ /*
-+ * HACK: for the dual port controller on port F, we don't support the second port right now
-+ */
-+ if (pdata->ncards > 1) {
-+ ret = gpio_request(pdata->cards[1].pin_pwr, "sd-pwr");
-+ gpio_direction_output(pdata->cards[1].pin_pwr, !pdata->cards[1].pwr_polarity);
-+ gpio_direction_output(pdata->cards[1].pin_pwr, pdata->cards[1].pwr_polarity);
-+ }
-+
-+ ret = gpio_request(pdata->cards[0].pin_pwr, "sd-pwr");
-+ if (ret) {
-+ goto fail_pwr;
-+ }
-+ gpio_direction_output(pdata->cards[0].pin_pwr, !pdata->cards[0].pwr_polarity);
-+
-+ /*
-+ * Allocate the MMC driver, it includes memory for our data.
-+ */
-+ mmc = mmc_alloc_host(sizeof(struct ubicom32sd_data), &pdev->dev);
-+ if (!mmc) {
-+ ret = -ENOMEM;
-+ goto fail_mmc;
-+ }
-+ ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+ ud->mmc = mmc;
-+ ud->pdata = pdata;
-+ ud->regs = (struct sdtio_vp_regs *)res_regs->start;
-+ ud->irq_tx = res_irq_tx->start;
-+ ud->irq_rx = res_irq_rx->start;
-+ platform_set_drvdata(pdev, mmc);
-+
-+ ret = request_irq(ud->irq_rx, ubicom32sd_interrupt, IRQF_DISABLED, mmc_hostname(mmc), mmc);
-+ if (ret) {
-+ goto fail_mmc;
-+ }
-+
-+ /*
-+ * Fill in the mmc structure
-+ */
-+ mmc->ops = &ubicom32sd_ops;
-+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ |
-+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
-+
-+ mmc->f_min = ud->regs->f_min;
-+ mmc->f_max = ud->regs->f_max;
-+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+
-+ /*
-+ * Setup some restrictions on transfers
-+ *
-+ * We allow up to SDTIO_MAX_SG_BLOCKS of data to DMA into, there are
-+ * not really any "max_seg_size", "max_req_size", or "max_blk_count"
-+ * restrictions (must be less than U32_MAX though), pick
-+ * something large?!...
-+ *
-+ * The hardware can do up to 4095 bytes per block, since the spec
-+ * only requires 2048, we'll set it to that and not worry about
-+ * potential weird blk lengths.
-+ */
-+ mmc->max_hw_segs = SDTIO_MAX_SG_BLOCKS;
-+ mmc->max_phys_segs = SDTIO_MAX_SG_BLOCKS;
-+ mmc->max_seg_size = 1024 * 1024;
-+ mmc->max_req_size = 1024 * 1024;
-+ mmc->max_blk_count = 1024;
-+
-+ mmc->max_blk_size = 2048;
-+
-+ ubicom32sd_reset(ud);
-+
-+ /*
-+ * enable interrupts
-+ */
-+ ud->int_en = 0;
-+ ubicom32sd_send_command_sync(ud, SDTIO_COMMAND_SETUP_SDIO << SDTIO_COMMAND_SHIFT | SDTIO_COMMAND_FLAG_SDIO_INT_EN, 0);
-+
-+ mmc_add_host(mmc);
-+
-+ printk(KERN_INFO "%s at %p, irq %d/%d\n", mmc_hostname(mmc),
-+ ud->regs, ud->irq_tx, ud->irq_rx);
-+ return 0;
-+
-+fail_mmc:
-+ gpio_free(pdata->cards[0].pin_pwr);
-+fail_pwr:
-+ gpio_free(pdata->cards[0].pin_cd);
-+fail_cd:
-+ gpio_free(pdata->cards[0].pin_wp);
-+fail:
-+ return ret;
-+}
-+
-+/*
-+ * ubicom32sd_remove
-+ */
-+static int __devexit ubicom32sd_remove(struct platform_device *pdev)
-+{
-+ struct mmc_host *mmc = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (mmc) {
-+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
-+
-+ gpio_free(ud->pdata->cards[0].pin_pwr);
-+ gpio_free(ud->pdata->cards[0].pin_cd);
-+ gpio_free(ud->pdata->cards[0].pin_wp);
-+
-+ mmc_remove_host(mmc);
-+ mmc_free_host(mmc);
-+ }
-+
-+ /*
-+ * Note that our data is allocated as part of the mmc structure
-+ * so we don't need to free it.
-+ */
-+ return 0;
-+}
-+
-+static struct platform_driver ubicom32sd_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ubicom32sd_probe,
-+ .remove = __devexit_p(ubicom32sd_remove),
-+#if 0
-+ .suspend = ubicom32sd_suspend,
-+ .resume = ubicom32sd_resume,
-+#endif
-+};
-+
-+/*
-+ * ubicom32sd_init
-+ */
-+static int __init ubicom32sd_init(void)
-+{
-+ return platform_driver_register(&ubicom32sd_driver);
-+}
-+module_init(ubicom32sd_init);
-+
-+/*
-+ * ubicom32sd_exit
-+ */
-+static void __exit ubicom32sd_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32sd_driver);
-+}
-+module_exit(ubicom32sd_exit);
-+
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("Ubicom32 Secure Digital Host Controller Interface driver");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/drivers/mtd/devices/Kconfig linux-2.6.30.10-ubi/drivers/mtd/devices/Kconfig
---- linux-2.6.30.10/drivers/mtd/devices/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mtd/devices/Kconfig 2009-12-11 11:45:16.000000000 +0200
-@@ -104,6 +104,31 @@
- help
- This option enables FAST_READ access supported by ST M25Pxx.
-
-+config MTD_UBI32_NAND_SPI_ER
-+ tristate "UBI32_NAND SPI-ER support"
-+ help
-+ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
-+ using the built in flash controller on the Ubicom32 architecture.
-+ Partial page writes are not supported by this driver.
-+
-+config MTD_NAND_SPI_ER
-+ tristate "NAND SPI-ER support"
-+ help
-+ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
-+ using a generic SPI bus. Partial page writes are supported
-+ by this driver.
-+
-+config MTD_UBI32_M25P80
-+ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
-+ depends on UBICOM32
-+ default y
-+ help
-+ This enables access to most modern SPI flash chips, used for
-+ program and data storage. Series supported include Atmel AT26DF,
-+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
-+ are supported as well. See the driver source for the current list,
-+ or to add other chips.
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
-diff -ruN linux-2.6.30.10/drivers/mtd/devices/Makefile linux-2.6.30.10-ubi/drivers/mtd/devices/Makefile
---- linux-2.6.30.10/drivers/mtd/devices/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mtd/devices/Makefile 2009-12-11 11:45:16.000000000 +0200
-@@ -16,3 +16,6 @@
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
-+obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o
-+obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o
-diff -ruN linux-2.6.30.10/drivers/mtd/devices/nand-spi-er.c linux-2.6.30.10-ubi/drivers/mtd/devices/nand-spi-er.c
---- linux-2.6.30.10/drivers/mtd/devices/nand-spi-er.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mtd/devices/nand-spi-er.c 2009-12-11 11:45:16.000000000 +0200
-@@ -0,0 +1,1017 @@
-+/*
-+ * Micron SPI-ER NAND Flash Memory
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+*/
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/mutex.h>
-+#include <linux/err.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define NAND_SPI_ER_BLOCK_FROM_ROW(row) (row >> 6)
-+
-+#define NAND_SPI_ER_STATUS_P_FAIL (1 << 3)
-+#define NAND_SPI_ER_STATUS_E_FAIL (1 << 2)
-+#define NAND_SPI_ER_STATUS_OIP (1 << 0)
-+
-+#define NAND_SPI_ER_LAST_ROW_INVALID 0xFFFFFFFF
-+#define NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET 0x08
-+
-+struct nand_spi_er_device {
-+ const char *name;
-+
-+ uint8_t id0;
-+ uint8_t id1;
-+
-+ unsigned int blocks;
-+ unsigned int pages_per_block;
-+ unsigned int page_size;
-+ unsigned int write_size;
-+ unsigned int erase_size;
-+};
-+
-+struct nand_spi_er {
-+ char name[24];
-+
-+ const struct nand_spi_er_device *device;
-+
-+ struct mutex lock;
-+ struct spi_device *spi;
-+
-+ struct mtd_info mtd;
-+
-+ unsigned int last_row; /* the last row we fetched */
-+
-+ /*
-+ * Bad block table (MUST be last in strcuture)
-+ */
-+ unsigned long nbb;
-+ unsigned long bbt[0];
-+};
-+
-+const struct nand_spi_er_device nand_spi_er_devices[] = {
-+ {
-+ name: "MT29F1G01ZDC",
-+ id0: 0x2C,
-+ id1: 0x12,
-+ blocks: 1024,
-+ pages_per_block: 64,
-+ page_size: 2048,
-+ write_size: 512,
-+ erase_size: 64 * 2048,
-+ },
-+ {
-+ name: "MT29F1G01ZDC",
-+ id0: 0x2C,
-+ id1: 0x13,
-+ blocks: 1024,
-+ pages_per_block: 64,
-+ page_size: 2048,
-+ write_size: 512,
-+ erase_size: 64 * 2048,
-+ },
-+};
-+
-+static int read_only = 0;
-+module_param(read_only, int, 0);
-+MODULE_PARM_DESC(read_only, "Leave device locked");
-+
-+/*
-+ * nand_spi_er_get_feature
-+ * Get Feature register
-+ */
-+static int nand_spi_er_get_feature(struct nand_spi_er *chip, int reg, uint8_t *data)
-+{
-+ uint8_t txbuf[2];
-+ uint8_t rxbuf[1];
-+ int res;
-+
-+ txbuf[0] = 0x0F;
-+ txbuf[1] = reg;
-+ res = spi_write_then_read(chip->spi, txbuf, 2, rxbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed get feature res=%d\n", chip->name, res);
-+ return res;
-+ }
-+ *data = rxbuf[0];
-+ return 0;
-+}
-+
-+/*
-+ * nand_spi_er_busywait
-+ * Wait until the chip is not busy
-+ */
-+static int nand_spi_er_busywait(struct nand_spi_er *chip, uint8_t *data)
-+{
-+ int i;
-+
-+ for (i = 0; i < 100; i++) {
-+ int res = nand_spi_er_get_feature(chip, 0xC0, data);
-+ if (res) {
-+ return res;
-+ }
-+ if (!(*data & NAND_SPI_ER_STATUS_OIP)) {
-+ break;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * nand_spi_er_erase
-+ * Erase a block, parameters must be block aligned
-+ */
-+static int nand_spi_er_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct nand_spi_er *chip = mtd->priv;
-+ struct spi_device *spi = chip->spi;
-+ uint8_t txbuf[4];
-+ int res;
-+
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: erase addr:%x len:%x\n", chip->name, instr->addr, instr->len);
-+
-+ if ((instr->addr + instr->len) > mtd->size) {
-+ return -EINVAL;
-+ }
-+
-+ if (instr->addr & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: erase address is not aligned %x\n", chip->name, instr->addr);
-+ return -EINVAL;
-+ }
-+
-+ if (instr->len & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: erase len is not aligned %x\n", chip->name, instr->len);
-+ return -EINVAL;
-+ }
-+
-+ mutex_lock(&chip->lock);
-+ chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ while (instr->len) {
-+ uint32_t block = instr->addr >> 17;
-+ uint32_t row = block << 6;
-+ uint8_t stat;
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: block erase row:%x block:%x addr:%x rem:%x\n", chip->name, row, block, instr->addr, instr->len);
-+
-+ /*
-+ * Write enable
-+ */
-+ txbuf[0] = 0x06;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write enable res=%d\n", chip->name, res);
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+
-+ /*
-+ * Test for bad block
-+ */
-+ if (test_bit(block, chip->bbt)) {
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ res = -EBADMSG;
-+ goto done;
-+ }
-+
-+ /*
-+ * Block erase
-+ */
-+ txbuf[0] = 0xD8;
-+ txbuf[1] = 0x00;
-+ txbuf[2] = row >> 8;
-+ txbuf[3] = row & 0xFF;
-+ res = spi_write(spi, txbuf, 4);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed block erase res=%d\n", chip->name, res);
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ goto done;
-+ }
-+
-+ /*
-+ * Wait
-+ */
-+ res = nand_spi_er_busywait(chip, &stat);
-+ if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
-+ if (res) {
-+ goto done;
-+ }
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ res = -EIO;
-+ goto done;
-+ }
-+
-+ /*
-+ * Check the status register
-+ */
-+ if (stat & NAND_SPI_ER_STATUS_E_FAIL) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: E_FAIL signalled (%02x)\n", chip->name, stat);
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ goto done;
-+ }
-+
-+ /*
-+ * Next
-+ */
-+ block++;
-+ instr->len -= chip->device->erase_size;
-+ instr->addr += chip->device->erase_size;
-+ }
-+
-+ instr->state = MTD_ERASE_DONE;
-+
-+ mutex_unlock(&chip->lock);
-+ return 0;
-+
-+done:
-+ /*
-+ * Write disable
-+ */
-+ txbuf[0] = 0x04;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write disable res=%d\n", chip->name, res);
-+ }
-+
-+ mutex_unlock(&chip->lock);
-+
-+ mtd_erase_callback(instr);
-+ return 0;
-+}
-+
-+/*
-+ * nand_spi_er_read
-+ *
-+ * return -EUCLEAN: ecc error recovered
-+ * return -EBADMSG: ecc error not recovered
-+*/
-+static int nand_spi_er_read(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
-+{
-+ struct nand_spi_er *chip = mtd->priv;
-+ struct spi_device *spi = chip->spi;
-+
-+ uint32_t row;
-+ uint32_t column;
-+ int retval = 0;
-+
-+ *retlen = 0;
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: read block from %llx len %d into %p\n", chip->name, from, len, buf);
-+
-+ /*
-+ * Zero length reads, nothing to do
-+ */
-+ if (len == 0) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Reject reads which go over the end of the flash
-+ */
-+ if ((from + len) > mtd->size) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Get the row and column address to start at
-+ */
-+ row = from >> 11;
-+ column = from & 0x7FF;
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: row=%x %d column=%x %d last_row=%x %d\n", chip->name, row, row, column, column, chip->last_row, chip->last_row);
-+
-+ /*
-+ * Read the data from the chip
-+ */
-+ mutex_lock(&chip->lock);
-+ while (len) {
-+ uint8_t stat;
-+ uint8_t txbuf[4];
-+ struct spi_message message;
-+ struct spi_transfer x[2];
-+ int res;
-+ size_t toread;
-+
-+ /*
-+ * Figure out how much to read
-+ *
-+ * If we are reading from the middle of a page then the most we
-+ * can read is to the end of the page
-+ */
-+ toread = len;
-+ if (toread > (chip->device->page_size - column)) {
-+ toread = chip->device->page_size - column;
-+ }
-+
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: buf=%p toread=%x row=%x column=%x last_row=%x\n", chip->name, buf, toread, row, column, chip->last_row);
-+
-+ if (chip->last_row != row) {
-+ /*
-+ * Check if the block is bad
-+ */
-+ if (test_bit(NAND_SPI_ER_BLOCK_FROM_ROW(row), chip->bbt)) {
-+ mutex_unlock(&chip->lock);
-+ return -EBADMSG;
-+ }
-+
-+ /*
-+ * Load the appropriate page
-+ */
-+ txbuf[0] = 0x13;
-+ txbuf[1] = 0x00;
-+ txbuf[2] = row >> 8;
-+ txbuf[3] = row & 0xFF;
-+ res = spi_write(spi, txbuf, 4);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed page load res=%d\n", chip->name, res);
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+
-+ /*
-+ * Wait
-+ */
-+ res = nand_spi_er_busywait(chip, &stat);
-+ if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
-+ if (res) {
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ mutex_unlock(&chip->lock);
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check the ECC bits
-+ */
-+ stat >>= 4;
-+ if (stat == 1) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: ECC recovered, row=%x\n", chip->name, row);
-+ retval = -EUCLEAN;
-+ }
-+ if (stat == 2) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: failed ECC, row=%x\n", chip->name, row);
-+ chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-+ mutex_unlock(&chip->lock);
-+ return -EBADMSG;
-+ }
-+
-+ }
-+
-+ chip->last_row = row;
-+
-+ /*
-+ * Read out the data
-+ */
-+ spi_message_init(&message);
-+ memset(x, 0, sizeof(x));
-+
-+ txbuf[0] = 0x03;
-+ txbuf[1] = column >> 8;
-+ txbuf[2] = column & 0xFF;
-+ txbuf[3] = 0;
-+ x[0].tx_buf = txbuf;
-+ x[0].len = 4;
-+ spi_message_add_tail(&x[0], &message);
-+
-+ x[1].rx_buf = buf;
-+ x[1].len = toread;
-+ spi_message_add_tail(&x[1], &message);
-+
-+ res = spi_sync(spi, &message);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed data read res=%d\n", chip->name, res);
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+ buf += toread;
-+ len -= toread;
-+ *retlen += toread;
-+
-+ /*
-+ * For the next page, increment the row and always start at column 0
-+ */
-+ column = 0;
-+ row++;
-+ }
-+
-+ mutex_unlock(&chip->lock);
-+ return retval;
-+}
-+
-+/*
-+ * nand_spi_er_write
-+ */
-+#define NOT_ALIGNED(x) ((x & (device->write_size - 1)) != 0)
-+static int nand_spi_er_write(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const u_char *buf)
-+{
-+ struct nand_spi_er *chip = mtd->priv;
-+ struct spi_device *spi = chip->spi;
-+ const struct nand_spi_er_device *device = chip->device;
-+ uint32_t row;
-+ uint32_t col;
-+ uint8_t txbuf[4];
-+ int res;
-+ size_t towrite;
-+
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: write block to %llx len %d from %p\n", chip->name, to, len, buf);
-+
-+ *retlen = 0;
-+
-+ /*
-+ * nothing to write
-+ */
-+ if (!len) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Reject writes which go over the end of the flash
-+ */
-+ if ((to + len) > mtd->size) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Check to see if everything is page aligned
-+ */
-+ if (NOT_ALIGNED(to) || NOT_ALIGNED(len)) {
-+ printk(KERN_NOTICE "nand_spi_er_write: Attempt to write non page aligned data\n");
-+ return -EINVAL;
-+ }
-+
-+ mutex_lock(&chip->lock);
-+ chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ /*
-+ * If the first write is a partial write then write at most the number of
-+ * bytes to get us page aligned and then the remainder will be
-+ * page aligned. The last bit may be a partial page as well.
-+ */
-+ col = to & (device->page_size - 1);
-+ towrite = device->page_size - col;
-+ if (towrite > len) {
-+ towrite = len;
-+ }
-+
-+ /*
-+ * Write the data
-+ */
-+ row = to >> 11;
-+ while (len) {
-+ struct spi_message message;
-+ struct spi_transfer x[2];
-+ uint8_t stat;
-+
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: write %p to row:%x col:%x len:%x rem:%x\n", chip->name, buf, row, col, towrite, len);
-+
-+ /*
-+ * Write enable
-+ */
-+ txbuf[0] = 0x06;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write enable res=%d\n", chip->name, res);
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+
-+ /*
-+ * Write the data into the cache
-+ */
-+ spi_message_init(&message);
-+ memset(x, 0, sizeof(x));
-+ txbuf[0] = 0x02;
-+ txbuf[1] = col >> 8;
-+ txbuf[2] = col & 0xFF;
-+ x[0].tx_buf = txbuf;
-+ x[0].len = 3;
-+ spi_message_add_tail(&x[0], &message);
-+ x[1].tx_buf = buf;
-+ x[1].len = towrite;
-+ spi_message_add_tail(&x[1], &message);
-+ res = spi_sync(spi, &message);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed cache write res=%d\n", chip->name, res);
-+ goto done;
-+ }
-+
-+ /*
-+ * Program execute
-+ */
-+ txbuf[0] = 0x10;
-+ txbuf[1] = 0x00;
-+ txbuf[2] = row >> 8;
-+ txbuf[3] = row & 0xFF;
-+ res = spi_write(spi, txbuf, 4);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed prog execute res=%d\n", chip->name, res);
-+ goto done;
-+ }
-+
-+ /*
-+ * Wait
-+ */
-+ res = nand_spi_er_busywait(chip, &stat);
-+ if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
-+ if (res) {
-+ goto done;
-+ }
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ res = -EIO;
-+ goto done;
-+ }
-+
-+ if (stat & (1 << 3)) {
-+ res = -EBADMSG;
-+ goto done;
-+ }
-+
-+ row++;
-+ buf += towrite;
-+ len -= towrite;
-+ *retlen += towrite;
-+
-+ /*
-+ * At this point, we are always page aligned so start at column 0.
-+ * Note we may not have a full page to write at the end, hence the
-+ * check if towrite > len.
-+ */
-+ col = 0;
-+ towrite = device->page_size;
-+ if (towrite > len) {
-+ towrite = len;
-+ }
-+ }
-+
-+ mutex_unlock(&chip->lock);
-+ return res;
-+
-+done:
-+ /*
-+ * Write disable
-+ */
-+ txbuf[0] = 0x04;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write disable res=%d\n", chip->name, res);
-+ }
-+
-+ mutex_unlock(&chip->lock);
-+
-+ return res;
-+}
-+
-+/*
-+ * nand_spi_er_isbad
-+ */
-+static int nand_spi_er_isbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_spi_er *chip = mtd->priv;
-+ uint32_t block;
-+
-+ if (ofs & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
-+ return -EINVAL;
-+ }
-+
-+ block = ofs >> 17;
-+
-+ return test_bit(block, chip->bbt);
-+}
-+
-+/*
-+ * nand_spi_er_markbad
-+ */
-+static int nand_spi_er_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_spi_er *chip = mtd->priv;
-+ struct spi_device *spi = chip->spi;
-+ uint32_t block;
-+ uint32_t row;
-+ uint8_t txbuf[7];
-+ int res;
-+ uint8_t stat;
-+
-+ if (ofs & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
-+ return -EINVAL;
-+ }
-+
-+ block = ofs >> 17;
-+
-+ /*
-+ * If it's already marked bad, no need to mark it
-+ */
-+ if (test_bit(block, chip->bbt)) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Mark it in our cache
-+ */
-+ __set_bit(block, chip->bbt);
-+
-+ /*
-+ * Write the user bad block mark. If it fails, then we really
-+ * can't do anything about it.
-+ */
-+ mutex_lock(&chip->lock);
-+ chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ /*
-+ * Write enable
-+ */
-+ txbuf[0] = 0x06;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write enable res=%d\n", chip->name, res);
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+
-+ /*
-+ * Write the mark
-+ */
-+ txbuf[0] = 0x84;
-+ txbuf[1] = 0x08;
-+ txbuf[2] = NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET;
-+ txbuf[3] = 0xde;
-+ txbuf[4] = 0xad;
-+ txbuf[5] = 0xbe;
-+ txbuf[6] = 0xef;
-+ res = spi_write(spi, txbuf, 7);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write mark res=%d\n", chip->name, res);
-+ goto done;
-+ }
-+
-+ /*
-+ * Program execute
-+ */
-+ row = ofs >> 11;
-+ txbuf[0] = 0x10;
-+ txbuf[1] = 0x00;
-+ txbuf[2] = row >> 8;
-+ txbuf[3] = row & 0xFF;
-+ res = spi_write(spi, txbuf, 4);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed program execute res=%d\n", chip->name, res);
-+ goto done;
-+ }
-+
-+ /*
-+ * Wait
-+ */
-+ res = nand_spi_er_busywait(chip, &stat);
-+ if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
-+ if (res) {
-+ goto done;
-+ }
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ res = -EIO;
-+ goto done;
-+ }
-+
-+ if (stat & (1 << 3)) {
-+ res = -EBADMSG;
-+ }
-+
-+done:
-+ /*
-+ * Write disable
-+ */
-+ txbuf[0] = 0x04;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed write disable res=%d\n", chip->name, res);
-+ }
-+
-+ mutex_unlock(&chip->lock);
-+
-+ return res;
-+}
-+
-+/*
-+ * nand_spi_er_read_bbt
-+ */
-+static int nand_spi_er_read_bbt(struct nand_spi_er *chip)
-+{
-+ int j;
-+ for (j = 0; j < chip->device->blocks; j++) {
-+ uint8_t txbuf[4];
-+ uint8_t rxbuf[16];
-+ uint32_t bbmark;
-+ int res;
-+ unsigned short row = j << 6;
-+ uint8_t stat;
-+
-+ /*
-+ * Read Page
-+ */
-+ txbuf[0] = 0x13;
-+ txbuf[1] = 0x00;
-+ txbuf[2] = row >> 8;
-+ txbuf[3] = row & 0xFF;
-+ res = spi_write(chip->spi, txbuf, 4);
-+ if (res) {
-+ return res;
-+ }
-+
-+ /*
-+ * Wait
-+ */
-+ res = nand_spi_er_busywait(chip, &stat);
-+ if (res || (stat & NAND_SPI_ER_STATUS_OIP)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive res=%d stat=%02x\n", chip->name, res, stat);
-+ if (res) {
-+ return res;
-+ }
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check factory bad block mark
-+ */
-+ txbuf[0] = 0x03;
-+ txbuf[1] = 0x08;
-+ txbuf[2] = 0x00;
-+ txbuf[3] = 0x00;
-+ res = spi_write_then_read(chip->spi, txbuf, 4, rxbuf, 16);
-+ if (res) {
-+ return res;
-+ }
-+ if (rxbuf[0] != 0xFF) {
-+ chip->nbb++;
-+ __set_bit(j, chip->bbt);
-+ continue;
-+ }
-+
-+ memcpy(&bbmark, &rxbuf[8], 4);
-+ if (bbmark == 0xdeadbeef) {
-+ chip->nbb++;
-+ __set_bit(j, chip->bbt);
-+ }
-+ }
-+
-+#if defined(CONFIG_MTD_DEBUG) && (MTD_DEBUG_LEVEL3 <= CONFIG_MTD_DEBUG_VERBOSE)
-+ printk("%s: Bad Block Table:", chip->name);
-+ for (j = 0; j < chip->device->blocks; j++) {
-+ if ((j % 64) == 0) {
-+ printk("\n%s: block %03x: ", chip->name, j);
-+ }
-+ printk("%c", test_bit(j, chip->bbt) ? 'X' : '.');
-+ }
-+ printk("\n%s: Bad Block Numbers: ", chip->name);
-+ for (j = 0; j < chip->device->blocks; j++) {
-+ if (test_bit(j, chip->bbt)) {
-+ printk("%x ", j);
-+ }
-+ }
-+ printk("\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+#ifndef MODULE
-+/*
-+ * Called at boot time:
-+ *
-+ * nand_spi_er=read_only
-+ * if read_only specified then do not unlock device
-+ */
-+static int __init nand_spi_er_setup(char *str)
-+{
-+ if (str && (strncasecmp(str, "read_only", 9) == 0)) {
-+ read_only = 1;
-+ }
-+ return 0;
-+}
-+
-+__setup("nand_spi_er=", nand_spi_er_setup);
-+#endif
-+
-+/*
-+ * nand_spi_er_probe
-+ * Detect and initialize nand_spi_er device.
-+ */
-+static int __devinit nand_spi_er_probe(struct spi_device *spi)
-+{
-+ uint8_t txbuf[3];
-+ uint8_t rxbuf[2];
-+ int i;
-+ int res;
-+ size_t bbt_bytes;
-+ struct nand_spi_er *chip;
-+ const struct nand_spi_er_device *device;
-+
-+ res = spi_setup(spi);
-+ if (res) {
-+ return res;
-+ }
-+
-+ /*
-+ * Reset
-+ */
-+ for (i = 0; i < 2; i++) {
-+ txbuf[0] = 0xFF;
-+ res = spi_write(spi, txbuf, 1);
-+ if (res) {
-+ return res;
-+ }
-+ udelay(250);
-+ }
-+ udelay(1000);
-+
-+ /*
-+ * Read ID
-+ */
-+ txbuf[0] = 0x9F;
-+ txbuf[1] = 0x00;
-+ res = spi_write_then_read(spi, txbuf, 2, rxbuf, 2);
-+ if (res) {
-+ return res;
-+ }
-+
-+ device = nand_spi_er_devices;
-+ for (i = 0; i < ARRAY_SIZE(nand_spi_er_devices); i++) {
-+ if ((device->id0 == rxbuf[0]) && (device->id1 == rxbuf[1])) {
-+ break;
-+ }
-+ device++;
-+ }
-+ if (i == ARRAY_SIZE(nand_spi_er_devices)) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Initialize our chip structure
-+ */
-+ bbt_bytes = DIV_ROUND_UP(device->blocks, BITS_PER_BYTE);
-+ chip = kzalloc(sizeof(struct nand_spi_er) + bbt_bytes, GFP_KERNEL);
-+ if (!chip) {
-+ return -ENOMEM;
-+ }
-+ snprintf(chip->name, sizeof(chip->name), "%s.%d.%d", device->name, spi->master->bus_num, spi->chip_select);
-+
-+ chip->spi = spi;
-+ chip->device = device;
-+ chip->last_row = NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ mutex_init(&chip->lock);
-+
-+ chip->mtd.type = MTD_NANDFLASH;
-+ chip->mtd.flags = MTD_WRITEABLE;
-+
-+ /*
-+ * #blocks * block size * n blocks
-+ */
-+ chip->mtd.size = device->blocks * device->pages_per_block * device->page_size;
-+ chip->mtd.erasesize = device->erase_size;
-+
-+ /*
-+ * 1 page, optionally we can support partial write (512)
-+ */
-+ chip->mtd.writesize = device->write_size;
-+ chip->mtd.name = device->name;
-+ chip->mtd.erase = nand_spi_er_erase;
-+ chip->mtd.read = nand_spi_er_read;
-+ chip->mtd.write = nand_spi_er_write;
-+ chip->mtd.block_isbad = nand_spi_er_isbad;
-+ chip->mtd.block_markbad = nand_spi_er_markbad;
-+ chip->mtd.priv = chip;
-+
-+ /*
-+ * Cache the bad block table
-+ */
-+ res = nand_spi_er_read_bbt(chip);
-+ if (res) {
-+ kfree(chip);
-+ return res;
-+ }
-+
-+ /*
-+ * Un/lock the chip
-+ */
-+ txbuf[0] = 0x1F;
-+ txbuf[1] = 0xA0;
-+ if (read_only) {
-+ txbuf[2] = 0x38;
-+ } else {
-+ txbuf[2] = 0x00;
-+ }
-+ res = spi_write(spi, txbuf, 3);
-+ if (res) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: failed lock operation res=%d\n", chip->name, res);
-+ mutex_unlock(&chip->lock);
-+ return res;
-+ }
-+
-+ spi_set_drvdata(spi, chip);
-+
-+ printk(KERN_INFO "%s: added device %s size: %u KBytes %u bad blocks %s\n", spi->dev.bus_id, chip->mtd.name, DIV_ROUND_UP(chip->mtd.size, 1024), chip->nbb, read_only ? "[read only]" : "");
-+ return add_mtd_device(&chip->mtd);
-+}
-+
-+/*
-+ * nand_spi_er_remove
-+ */
-+static int __devexit nand_spi_er_remove(struct spi_device *spi)
-+{
-+ struct nand_spi_er *chip = spi_get_drvdata(spi);
-+ int status = 0;
-+
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", spi->dev.bus_id);
-+ status = del_mtd_device(&chip->mtd);
-+ if (status == 0)
-+ kfree(chip);
-+ return status;
-+}
-+
-+static struct spi_driver nand_spi_er_driver = {
-+ .driver = {
-+ .name = "nand-spi-er",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .probe = nand_spi_er_probe,
-+ .remove = __devexit_p(nand_spi_er_remove),
-+
-+ /* FIXME: investigate suspend and resume... */
-+};
-+
-+/*
-+ * nand_spi_er_init
-+ */
-+static int __init nand_spi_er_init(void)
-+{
-+ return spi_register_driver(&nand_spi_er_driver);
-+}
-+module_init(nand_spi_er_init);
-+
-+/*
-+ * nand_spi_er_exit
-+ */
-+static void __exit nand_spi_er_exit(void)
-+{
-+ spi_unregister_driver(&nand_spi_er_driver);
-+}
-+module_exit(nand_spi_er_exit);
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("MTD nand_spi_er driver");
-diff -ruN linux-2.6.30.10/drivers/mtd/devices/ubi32-m25p80.c linux-2.6.30.10-ubi/drivers/mtd/devices/ubi32-m25p80.c
---- linux-2.6.30.10/drivers/mtd/devices/ubi32-m25p80.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mtd/devices/ubi32-m25p80.c 2009-12-11 11:45:16.000000000 +0200
-@@ -0,0 +1,1066 @@
-+/*
-+ * drivers/mtd/devices/ubi32-m25p80.c
-+ * NOR flash driver, Ubicom processor internal SPI flash interface.
-+ *
-+ * This code instantiates the serial flash that contains the
-+ * original bootcode. The serial flash start at address 0x60000000
-+ * in both Ubicom32V3 and Ubicom32V4 ISAs.
-+ *
-+ * This piece of flash is made to appear as a Memory Technology
-+ * Device (MTD) with this driver to allow Read/Write/Erase operations.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/types.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/mutex.h>
-+
-+#include <asm/ip5000.h>
-+#include <asm/devtree.h>
-+
-+#define UBICOM32_FLASH_BASE 0x60000000
-+#define UBICOM32_FLASH_MAX_SIZE 0x01000000
-+#define UBICOM32_FLASH_START 0x00000000
-+#define UBICOM32_KERNEL_OFFSET 0x00010000 /* The kernel starts after Ubicom
-+ * .protect section. */
-+
-+static struct mtd_partition ubicom32_flash_partitions[] = {
-+ {
-+ .name = "Bootloader", /* Protected Section
-+ * Partition */
-+ .size = 0x10000,
-+ .offset = UBICOM32_FLASH_START,
-+// .mask_flags = MTD_WRITEABLE /* Mark Read-only */
-+ },
-+ {
-+ .name = "Kernel", /* Kernel Partition. */
-+ .size = 0, /* this will be set up during
-+ * probe stage. At that time we
-+ * will know end of linux image
-+ * in flash. */
-+ .offset = MTDPART_OFS_APPEND, /* Starts right after Protected
-+ * section. */
-+// .mask_flags = MTD_WRITEABLE /* Mark Read-only */
-+ },
-+ {
-+ .name = "Rest", /* Rest of the flash. */
-+ .size = 0x200000, /* Use up what remains in the
-+ * flash. */
-+ .offset = MTDPART_OFS_NXTBLK, /* Starts right after Protected
-+ * section. */
-+ }
-+};
-+
-+static struct flash_platform_data ubicom32_flash_data = {
-+ .name = "ubicom32_boot_flash",
-+ .parts = ubicom32_flash_partitions,
-+ .nr_parts = ARRAY_SIZE(ubicom32_flash_partitions),
-+};
-+
-+static struct resource ubicom32_flash_resource[] = {
-+ {
-+ .start = UBICOM32_FLASH_BASE,
-+ .end = UBICOM32_FLASH_BASE +
-+ UBICOM32_FLASH_MAX_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device ubicom32_flash_device = {
-+ .name = "ubicom32flashdriver",
-+ .id = 0, /* Bus number */
-+ .num_resources = ARRAY_SIZE(ubicom32_flash_resource),
-+ .resource = ubicom32_flash_resource,
-+ .dev = {
-+ .platform_data = &ubicom32_flash_data,
-+ },
-+};
-+
-+static struct platform_device *ubicom32_flash_devices[] = {
-+ &ubicom32_flash_device,
-+};
-+
-+static int __init ubicom32_flash_init(void)
-+{
-+ printk(KERN_INFO "%s(): registering device resources\n",
-+ __FUNCTION__);
-+ platform_add_devices(ubicom32_flash_devices,
-+ ARRAY_SIZE(ubicom32_flash_devices));
-+ return 0;
-+}
-+
-+arch_initcall(ubicom32_flash_init);
-+
-+/*
-+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips through
-+ * Ubicom32 SPI controller.
-+ *
-+ * Author: Mike Lavender, mike@steroidmicros.com
-+ *
-+ * Copyright (c) 2005, Intec Automation Inc.
-+ *
-+ * Some parts are based on lart.c by Abraham Van Der Merwe
-+ *
-+ * Cleaned up and generalized based on mtd_dataflash.c
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#define FLASH_PAGESIZE 256
-+
-+/* Flash opcodes. */
-+#define OPCODE_WREN 0x06 /* Write enable */
-+#define OPCODE_RDSR 0x05 /* Read status register */
-+#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
-+#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
-+#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
-+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
-+#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
-+#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
-+#define OPCODE_RDID 0x9f /* Read JEDEC ID */
-+
-+/* Status Register bits. */
-+#define SR_WIP 1 /* Write in progress */
-+#define SR_WEL 2 /* Write enable latch */
-+/* meaning of other SR_* bits may differ between vendors */
-+#define SR_BP0 4 /* Block protect 0 */
-+#define SR_BP1 8 /* Block protect 1 */
-+#define SR_BP2 0x10 /* Block protect 2 */
-+#define SR_SRWD 0x80 /* SR write protect */
-+
-+/* Define max times to check status register before we give up. */
-+#define MAX_READY_WAIT_COUNT 100000
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#define mtd_has_partitions() (1)
-+#else
-+#define mtd_has_partitions() (0)
-+#endif
-+
-+/*
-+ * Ubicom32 FLASH Command Set
-+ */
-+#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */
-+#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */
-+#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */
-+
-+#define ALIGN_DOWN(v, a) ((v) & ~((a) - 1))
-+#define ALIGN_UP(v, a) (((v) + ((a) - 1)) & ~((a) - 1))
-+
-+#define FLASH_COMMAND_KICK_OFF(io) \
-+ asm volatile( \
-+ " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
-+ " jmpt.t .+4 \n\t" \
-+ " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \
-+ : \
-+ : "a" (io) \
-+ : "memory", "cc" \
-+ );
-+
-+#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \
-+ asm volatile( \
-+ " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
-+ " jmpeq.f .-4 \n\t" \
-+ : \
-+ : "a" (io) \
-+ : "memory", "cc" \
-+ );
-+
-+#define FLASH_COMMAND_EXEC(io) \
-+ FLASH_COMMAND_KICK_OFF(io) \
-+ FLASH_COMMAND_WAIT_FOR_COMPLETION(io)
-+
-+
-+#define OSC1_FREQ 12000000
-+#define TEN_MICRO_SECONDS (OSC1_FREQ * 10 / 1000000)
-+
-+/*
-+ * We will have to eventually replace this null definition with the real thing.
-+ */
-+#define WATCHDOG_RESET()
-+
-+#define EXTFLASH_WRITE_FIFO_SIZE 32
-+#define EXTFLASH_WRITE_BLOCK_SIZE EXTFLASH_WRITE_FIFO_SIZE /* limit the size to
-+ * FIFO capacity, so
-+ * the thread can be
-+ * suspended. */
-+
-+#define JFFS2_FILESYSTEM_SIZE 0x100000
-+
-+/****************************************************************************/
-+
-+struct m25p {
-+ struct platform_device *plt_dev;
-+ struct mutex lock;
-+ struct mtd_info mtd;
-+ unsigned partitioned:1;
-+ u8 erase_opcode;
-+ u8 command[4];
-+};
-+
-+static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-+{
-+ return container_of(mtd, struct m25p, mtd);
-+}
-+
-+/****************************************************************************/
-+
-+/*
-+ * Internal helper functions
-+ */
-+
-+/*
-+ * Read the status register, returning its value in the location
-+ * Return the status register value.
-+ * Returns negative if error occurred.
-+ */
-+static int read_sr(struct m25p *flash)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-+
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
-+ IO_XFL_CTL1_FC_DATA(1);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ return io->status1 & 0xff;
-+}
-+
-+/*
-+ * mem_flash_io_read_u32()
-+ */
-+static u32 mem_flash_io_read_u32(u32 addr)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
-+ IO_XFL_CTL1_FC_DATA(4) | IO_XFL_CTL1_FC_DUMMY(1) |
-+ IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_FAST_READ) |
-+ IO_XFL_CTL2_FC_ADDR(addr);
-+ FLASH_COMMAND_EXEC(io);
-+ return io->status1;
-+}
-+
-+/*
-+ * mem_flash_read_u8()
-+ */
-+static u8 mem_flash_read_u8(u32 addr)
-+{
-+ u32 tmp_addr = ALIGN_DOWN(addr, 4);
-+ u32 tmp_data = mem_flash_io_read_u32(tmp_addr);
-+ u8 *ptr = (u8 *)&tmp_data;
-+ return ptr[addr & 0x3];
-+}
-+
-+/*
-+ * mem_flash_read()
-+ * No need to lock as read is implemented with ireads (same as normal flash
-+ * execution).
-+ */
-+static void mem_flash_read(u32 addr, void *dst, size_t length)
-+{
-+ /*
-+ * Range check
-+ */
-+ /*
-+ * Fix source alignment.
-+ */
-+ while (addr & 0x03) {
-+ if (length == 0) {
-+ return;
-+ }
-+ *((u8 *)dst) = mem_flash_read_u8(addr++);
-+ dst++;
-+ length--;
-+ }
-+
-+ while (length >= 4) {
-+ u32 tmp_data = mem_flash_io_read_u32(addr);
-+ addr += 4;
-+ length -= 4;
-+
-+ /*
-+ * Send the data to the destination.
-+ */
-+ memcpy((void *)dst, (void *)&tmp_data, 4);
-+ dst += 4;
-+ }
-+
-+ while (length--) {
-+ *((u8 *)dst) = mem_flash_read_u8(addr++);
-+ dst++;
-+ }
-+}
-+
-+/*
-+ * mem_flash_wait_until_complete()
-+ */
-+static void mem_flash_wait_until_complete(void)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-+
-+ do {
-+ /*
-+ * Put a delay here to deal with flash programming problem.
-+ */
-+ u32 mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS;
-+ while (UBICOM32_IO_TIMER->mptval < mptval)
-+ ;
-+
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
-+ IO_XFL_CTL1_FC_DATA(1);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR);
-+ FLASH_COMMAND_EXEC(io);
-+ } while (io->status1 & SR_WIP);
-+}
-+
-+/*
-+ * mem_flash_write_next()
-+ */
-+static size_t mem_flash_write_next(u32 addr, u8 *buf, size_t length)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-+ u32 data_start = addr;
-+ u32 data_end = addr + length;
-+ size_t count;
-+ u32 i, j;
-+
-+ /*
-+ * Top limit address.
-+ */
-+ u32 block_start = ALIGN_DOWN(data_start, 4);
-+ u32 block_end = block_start + EXTFLASH_WRITE_BLOCK_SIZE;
-+
-+ union {
-+ u8 byte[EXTFLASH_WRITE_BLOCK_SIZE];
-+ u32 word[EXTFLASH_WRITE_BLOCK_SIZE / 4];
-+ } write_buf;
-+
-+ u32 *flash_addr = (u32 *)block_start;
-+
-+ /*
-+ * The write block must be limited by FLASH internal buffer.
-+ */
-+ u32 block_end_align = ALIGN_DOWN(block_end, 256);
-+ bool write_needed;
-+
-+ block_end = (block_end_align > block_start)
-+ ? block_end_align : block_end;
-+ data_end = (data_end <= block_end) ? data_end : block_end;
-+ block_end = ALIGN_UP(data_end, 4);
-+ count = data_end - data_start;
-+
-+ /*
-+ * Transfer data to a buffer.
-+ */
-+ for (i = 0; i < (block_end - block_start) / 4; i++) {
-+ /*
-+ * The FLASH read can hold D-cache for a long time.
-+ * Use I/O operation to read FLASH to avoid starving other
-+ * threads, especially HRT. (Do this for application only)
-+ */
-+ write_buf.word[i] = mem_flash_io_read_u32(
-+ (u32)(&flash_addr[i]));
-+ }
-+
-+ write_needed = false;
-+ for (i = 0, j = (data_start - block_start);
-+ i < (data_end - data_start); i++, j++) {
-+ write_needed = write_needed || (write_buf.byte[j] != buf[i]);
-+ write_buf.byte[j] &= buf[i];
-+ }
-+
-+
-+ /*
-+ * If the data in FLASH is identical to what to be written. Then skip
-+ * it.
-+ */
-+ if (write_needed) {
-+ /*
-+ * Write to flash.
-+ */
-+ void *tmp __attribute__((unused));
-+ s32 extra_words;
-+
-+ asm volatile(
-+ " move.4 %0, %2 \n\t"
-+ " bset "D(IO_INT_SET)"(%1), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
-+ " pipe_flush 0 \n\t"
-+ " .rept "D(EXTFLASH_WRITE_FIFO_SIZE / 4)" \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t"
-+ " .endr \n\t"
-+ : "=&a" (tmp)
-+ : "a" (io), "r" (&write_buf.word[0])
-+ : "memory", "cc"
-+ );
-+
-+ /* Lock FLASH for write access. */
-+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-+
-+ /* Command: WREN */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ /* Command: BYTE PROGRAM */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) |
-+ IO_XFL_CTL1_FC_DATA(block_end - block_start) |
-+ IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_PP) |
-+ IO_XFL_CTL2_FC_ADDR(block_start);
-+ FLASH_COMMAND_KICK_OFF(io);
-+
-+ extra_words = (s32)(block_end - block_start -
-+ EXTFLASH_WRITE_FIFO_SIZE) / 4;
-+ if (extra_words > 0) {
-+ asm volatile(
-+ " move.4 %0, %3 \n\t"
-+ "1: cmpi "D(IO_FIFO_LEVEL)"(%1), #4 \n\t"
-+ " jmpgt.s.t 1b \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t"
-+ " add.4 %2, #-1, %2 \n\t"
-+ " jmpgt.t 1b \n\t"
-+ : "=&a" (tmp)
-+ : "a" (io), "d" (extra_words),
-+ "r" (&write_buf.word[EXTFLASH_WRITE_FIFO_SIZE / 4])
-+ : "memory", "cc"
-+ );
-+ }
-+ FLASH_COMMAND_WAIT_FOR_COMPLETION(io);
-+
-+ mem_flash_wait_until_complete();
-+
-+
-+ /* Unlock FLASH for cache access. */
-+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-+ }
-+
-+ /*
-+ * Complete.
-+ */
-+ return count;
-+}
-+
-+/*
-+ * mem_flash_write()
-+ */
-+static void mem_flash_write(u32 addr, const void *src, size_t length)
-+{
-+ /*
-+ * Write data
-+ */
-+ u8_t *ptr = (u8_t *)src;
-+ while (length) {
-+ size_t count = mem_flash_write_next(addr, ptr, length);
-+ addr += count;
-+ ptr += count;
-+ length -= count;
-+ }
-+}
-+
-+/*
-+ * Service routine to read status register until ready, or timeout occurs.
-+ * Returns non-zero if error.
-+ */
-+static int wait_till_ready(struct m25p *flash)
-+{
-+ int count;
-+ int sr;
-+
-+ /* one chip guarantees max 5 msec wait here after page writes,
-+ * but potentially three seconds (!) after page erase.
-+ */
-+ for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
-+ u32 mptval;
-+ sr = read_sr(flash);
-+ if (sr < 0)
-+ break;
-+ else if (!(sr & SR_WIP))
-+ return 0;
-+
-+ /*
-+ * Put a 10us delay here to deal with flash programming problem.
-+ */
-+ mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS;
-+ while ((s32)(mptval - UBICOM32_IO_TIMER->mptval) > 0) {
-+ WATCHDOG_RESET();
-+ }
-+ /* REVISIT sometimes sleeping would be best */
-+ }
-+
-+ return 1;
-+}
-+
-+/*
-+ * mem_flash_erase_page()
-+ */
-+static void mem_flash_erase_page(u32 addr)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-+
-+ /* Lock FLASH for write access. */
-+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-+
-+ /* Command: WREN */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ /* Command: ERASE */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) |
-+ IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_SE) |
-+ IO_XFL_CTL2_FC_ADDR(addr);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ mem_flash_wait_until_complete();
-+
-+ /* Unlock FLASH for cache access. */
-+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-+}
-+
-+/*
-+ * mem_flash_erase()
-+ */
-+static u32 mem_flash_erase(u32 addr, u32 length)
-+{
-+ /*
-+ * Calculate the endaddress to be the first address of the page
-+ * just beyond this erase section of pages.
-+ */
-+ u32 endaddr = addr + length;
-+
-+ /*
-+ * Erase.
-+ */
-+ while (addr < endaddr) {
-+ u32 test_addr = addr;
-+ mem_flash_erase_page(addr);
-+
-+ /*
-+ * Test how much was erased as actual flash page at this address
-+ * may be smaller than the expected page size.
-+ */
-+ while (test_addr < endaddr) {
-+ /*
-+ * The FLASH read can hold D-cache for a long time. Use
-+ * I/O operation to read FLASH to avoid starving other
-+ * threads, especially HRT. (Do this for application
-+ * only)
-+ */
-+ if (mem_flash_io_read_u32(test_addr) != 0xFFFFFFFF) {
-+ break;
-+ }
-+ test_addr += 4;
-+ }
-+ if (test_addr == addr) {
-+ printk("erase failed at address 0x%x, skipping",
-+ test_addr);
-+ test_addr += 4;
-+ return 1;
-+ }
-+ addr = test_addr;
-+ }
-+ return 0;
-+}
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * MTD implementation
-+ */
-+
-+/*
-+ * Erase an address range on the flash chip. The address range may extend
-+ * one or more erase sectors. Return an error is there is a problem erasing.
-+ */
-+static int ubicom32_flash_driver_erase(struct mtd_info *mtd,
-+ struct erase_info *instr)
-+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ u32 addr, len;
-+
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %lld\n",
-+ dev_name(&flash->plt_dev->dev), __FUNCTION__, "at",
-+ (u32)instr->addr, instr->len);
-+
-+ /* sanity checks */
-+ if (instr->addr + instr->len > flash->mtd.size)
-+ return -EINVAL;
-+ if ((instr->addr % mtd->erasesize) != 0
-+ || (instr->len % mtd->erasesize) != 0) {
-+ return -EINVAL;
-+ }
-+
-+ addr = instr->addr + UBICOM32_FLASH_BASE;
-+ len = instr->len;
-+
-+ mutex_lock(&flash->lock);
-+
-+ /* REVISIT in some cases we could speed up erasing large regions
-+ * by using OPCODE_SE instead of OPCODE_BE_4K
-+ */
-+
-+ /* now erase those sectors */
-+ if (mem_flash_erase(addr, len)) {
-+ instr->state = MTD_ERASE_FAILED;
-+ mutex_unlock(&flash->lock);
-+ return -EIO;
-+ }
-+
-+ mutex_unlock(&flash->lock);
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+ return 0;
-+}
-+
-+/*
-+ * Read an address range from the flash chip. The address range
-+ * may be any size provided it is within the physical boundaries.
-+ */
-+static int ubicom32_flash_driver_read(struct mtd_info *mtd, loff_t from,
-+ size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ u32 base_addr = UBICOM32_FLASH_BASE + from;
-+
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
-+ dev_name(&flash->plt_dev->dev), __FUNCTION__, "from",
-+ (u32)from, len);
-+
-+ /* sanity checks */
-+ if (!len)
-+ return 0;
-+
-+ if (from + len > flash->mtd.size)
-+ return -EINVAL;
-+
-+ /* Byte count starts at zero. */
-+ if (retlen)
-+ *retlen = 0;
-+
-+ mutex_lock(&flash->lock);
-+
-+ /* Wait till previous write/erase is done. */
-+ if (wait_till_ready(flash)) {
-+ /* REVISIT status return?? */
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ mem_flash_read(base_addr, (void *)buf, len);
-+
-+ if (retlen)
-+ *retlen = len;
-+
-+ mutex_unlock(&flash->lock);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Write an address range to the flash chip. Data must be written in
-+ * FLASH_PAGESIZE chunks. The address range may be any size provided
-+ * it is within the physical boundaries.
-+ */
-+static int ubicom32_flash_driver_write(struct mtd_info *mtd, loff_t to,
-+ size_t len, size_t *retlen,
-+ const u_char *buf)
-+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ u32 base_addr = UBICOM32_FLASH_BASE + to;
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
-+ dev_name(&flash->plt_dev->dev), __FUNCTION__, "to",
-+ (u32)to, len);
-+
-+ if (retlen)
-+ *retlen = 0;
-+
-+ /* sanity checks */
-+ if (!len)
-+ return 0;
-+
-+ if (to + len > flash->mtd.size)
-+ return -EINVAL;
-+
-+ mutex_lock(&flash->lock);
-+
-+ mem_flash_write(base_addr, (void *) buf, len);
-+
-+ /* Wait until finished previous write command. */
-+ if (wait_till_ready(flash)) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ if (retlen)
-+ *retlen = len;
-+
-+ mutex_unlock(&flash->lock);
-+ return 0;
-+}
-+
-+
-+/****************************************************************************/
-+
-+/*
-+ * SPI device driver setup and teardown
-+ */
-+
-+struct flash_info {
-+ char *name;
-+
-+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
-+ * a high byte of zero plus three data bytes: the manufacturer id,
-+ * then a two byte device id.
-+ */
-+ u32 jedec_id;
-+
-+ /* The size listed here is what works with OPCODE_SE, which isn't
-+ * necessarily called a "sector" by the vendor.
-+ */
-+ unsigned sector_size;
-+ u16 n_sectors;
-+
-+ u16 flags;
-+#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
-+};
-+
-+
-+/* NOTE: double check command sets and memory organization when you add
-+ * more flash chips. This current list focusses on newer chips, which
-+ * have been converging on command sets which including JEDEC ID.
-+ */
-+static struct flash_info __devinitdata m25p_data[] = {
-+
-+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
-+ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
-+ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
-+
-+ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
-+
-+ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
-+ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
-+ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
-+ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
-+
-+ /* Spansion -- single (large) sector size only, at least
-+ * for the chips listed here (without boot sectors).
-+ */
-+ { "s25sl004a", 0x010212, 64 * 1024, 8, },
-+ { "s25sl008a", 0x010213, 64 * 1024, 16, },
-+ { "s25sl016a", 0x010214, 64 * 1024, 32, },
-+ { "s25sl032a", 0x010215, 64 * 1024, 64, },
-+ { "s25sl064a", 0x010216, 64 * 1024, 128, },
-+
-+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
-+ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
-+ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
-+ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
-+ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
-+
-+ /* ST Microelectronics -- newer production may have feature updates */
-+ { "m25p05", 0x202010, 32 * 1024, 2, },
-+ { "m25p10", 0x202011, 32 * 1024, 4, },
-+ { "m25p20", 0x202012, 64 * 1024, 4, },
-+ { "m25p40", 0x202013, 64 * 1024, 8, },
-+ { "m25p80", 0, 64 * 1024, 16, },
-+ { "m25p16", 0x202015, 64 * 1024, 32, },
-+ { "m25p32", 0x202016, 64 * 1024, 64, },
-+ { "m25p64", 0x202017, 64 * 1024, 128, },
-+ { "m25p128", 0x202018, 256 * 1024, 64, },
-+
-+ { "m45pe80", 0x204014, 64 * 1024, 16, },
-+ { "m45pe16", 0x204015, 64 * 1024, 32, },
-+
-+ { "m25pe80", 0x208014, 64 * 1024, 16, },
-+ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
-+
-+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-+ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
-+ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
-+ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
-+ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
-+ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
-+ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
-+ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
-+
-+ /* Macronix -- mx25lxxx */
-+ { "mx25l32", 0xc22016, 64 * 1024, 64, },
-+ { "mx25l64", 0xc22017, 64 * 1024, 128, },
-+ { "mx25l128", 0xc22018, 64 * 1024, 256, },
-+
-+};
-+
-+struct flash_info *__devinit jedec_probe(struct platform_device *spi)
-+{
-+ int tmp;
-+ u32 jedec;
-+ struct flash_info *info;
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
-+
-+ /*
-+ * Setup and run RDID command on the flash.
-+ */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
-+ IO_XFL_CTL1_FC_DATA(3);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDID);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ jedec = io->status1 & 0x00ffffff;
-+
-+ for (tmp = 0, info = m25p_data;
-+ tmp < ARRAY_SIZE(m25p_data);
-+ tmp++, info++) {
-+ if (info->jedec_id == jedec)
-+ return info;
-+ }
-+ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
-+ return NULL;
-+}
-+
-+
-+/*
-+ * board specific setup should have ensured the SPI clock used here
-+ * matches what the READ command supports, at least until this driver
-+ * understands FAST_READ (for clocks over 25 MHz).
-+ */
-+static int __devinit ubicom32_flash_probe(struct platform_device *spi)
-+{
-+ struct flash_platform_data *data;
-+ struct m25p *flash;
-+ struct flash_info *info;
-+ unsigned i;
-+
-+ /* Platform data helps sort out which chip type we have, as
-+ * well as how this board partitions it. If we don't have
-+ * a chip ID, try the JEDEC id commands; they'll work for most
-+ * newer chips, even if we don't recognize the particular chip.
-+ */
-+ data = spi->dev.platform_data;
-+ if (data && data->type) {
-+ for (i = 0, info = m25p_data;
-+ i < ARRAY_SIZE(m25p_data);
-+ i++, info++) {
-+ if (strcmp(data->type, info->name) == 0)
-+ break;
-+ }
-+
-+ /* unrecognized chip? */
-+ if (i == ARRAY_SIZE(m25p_data)) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
-+ dev_name(&spi->dev), data->type);
-+ info = NULL;
-+
-+ /* recognized; is that chip really what's there? */
-+ } else if (info->jedec_id) {
-+ struct flash_info *chip = jedec_probe(spi);
-+
-+ if (!chip || chip != info) {
-+ dev_warn(&spi->dev, "found %s, expected %s\n",
-+ chip ? chip->name : "UNKNOWN",
-+ info->name);
-+ info = NULL;
-+ }
-+ }
-+ } else
-+ info = jedec_probe(spi);
-+
-+ if (!info)
-+ return -ENODEV;
-+
-+ flash = kzalloc(sizeof *flash, GFP_KERNEL);
-+ if (!flash)
-+ return -ENOMEM;
-+
-+ flash->plt_dev = spi;
-+ mutex_init(&flash->lock);
-+ dev_set_drvdata(&spi->dev, flash);
-+
-+ if (data && data->name)
-+ flash->mtd.name = data->name;
-+ else
-+ flash->mtd.name = dev_name(&spi->dev);
-+
-+ flash->mtd.type = MTD_NORFLASH;
-+ flash->mtd.writesize = 1;
-+ flash->mtd.flags = MTD_CAP_NORFLASH;
-+ flash->mtd.size = info->sector_size * info->n_sectors;
-+ flash->mtd.erase = ubicom32_flash_driver_erase;
-+ flash->mtd.read = ubicom32_flash_driver_read;
-+ flash->mtd.write = ubicom32_flash_driver_write;
-+
-+ /* prefer "small sector" erase if possible */
-+ /*
-+ * The Ubicom erase code does not use the opcode for smaller sectors,
-+ * so disable that functionality and keep erasesize == sector_size
-+ * so that the test in ubicom32_flash_driver_erase works properly.
-+ *
-+ * This was: `if (info->flags & SECT_4K) {' instead of `if (0) {'
-+ */
-+ if (0) {
-+ flash->erase_opcode = OPCODE_BE_4K;
-+ flash->mtd.erasesize = 4096;
-+ } else {
-+ flash->erase_opcode = OPCODE_SE;
-+ flash->mtd.erasesize = info->sector_size;
-+ }
-+
-+ dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name,
-+ flash->mtd.size / 1024);
-+
-+ DEBUG(MTD_DEBUG_LEVEL2,
-+ "mtd .name = %s, .size = 0x%.8llx (%lluMiB) "
-+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
-+ flash->mtd.name,
-+ flash->mtd.size, flash->mtd.size / (1024*1024),
-+ flash->mtd.erasesize, flash->mtd.erasesize / 1024,
-+ flash->mtd.numeraseregions);
-+
-+ if (flash->mtd.numeraseregions)
-+ for (i = 0; i < flash->mtd.numeraseregions; i++)
-+ DEBUG(MTD_DEBUG_LEVEL2,
-+ "mtd.eraseregions[%d] = { .offset = 0x%.8llx, "
-+ ".erasesize = 0x%.8x (%uKiB), "
-+ ".numblocks = %d }\n",
-+ i, flash->mtd.eraseregions[i].offset,
-+ flash->mtd.eraseregions[i].erasesize,
-+ flash->mtd.eraseregions[i].erasesize / 1024,
-+ flash->mtd.eraseregions[i].numblocks);
-+
-+
-+ /* partitions should match sector boundaries; and it may be good to
-+ * use readonly partitions for writeprotected sectors (BP2..BP0).
-+ */
-+ if (mtd_has_partitions()) {
-+ struct mtd_partition *parts = NULL;
-+ int nr_parts = 0;
-+
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+ nr_parts = parse_mtd_partitions(&flash->mtd,
-+ part_probes, &parts, 0);
-+#endif
-+
-+ if (nr_parts <= 0 && data && data->parts) {
-+ parts = data->parts;
-+ nr_parts = data->nr_parts;
-+ if (nr_parts >= 2) {
-+ /*
-+ * Set last partition size to be 1M.
-+ */
-+ parts[1].size = flash->mtd.size -
-+ parts[0].size - JFFS2_FILESYSTEM_SIZE;
-+ parts[2].size = JFFS2_FILESYSTEM_SIZE;
-+ }
-+ }
-+
-+ if (nr_parts > 0) {
-+ for (i = 0; i < nr_parts; i++) {
-+ DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
-+ "{.name = %s, .offset = 0x%.8llx, "
-+ ".size = 0x%.8llx (%lluKiB) }\n",
-+ i, parts[i].name,
-+ parts[i].offset,
-+ parts[i].size,
-+ parts[i].size / 1024);
-+ }
-+ flash->partitioned = 1;
-+ return add_mtd_partitions(&flash->mtd, parts, nr_parts);
-+ }
-+ } else if (data->nr_parts)
-+ dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
-+ data->nr_parts, data->name);
-+
-+ return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0;
-+}
-+
-+
-+static int __devexit ubicom32_flash_remove(struct spi_device *spi)
-+{
-+ struct m25p *flash = dev_get_drvdata(&spi->dev);
-+ int status;
-+
-+ /* Clean up MTD stuff. */
-+ if (mtd_has_partitions() && flash->partitioned)
-+ status = del_mtd_partitions(&flash->mtd);
-+ else
-+ status = del_mtd_device(&flash->mtd);
-+ if (status == 0)
-+ kfree(flash);
-+ return 0;
-+}
-+
-+static struct platform_driver ubicom32_flash_driver = {
-+ .driver = {
-+ .name = "ubicom32flashdriver",
-+ .bus = &platform_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ubicom32_flash_probe,
-+ .remove = NULL,
-+};
-+
-+static int ubicom32_flash_driver_init(void)
-+{
-+ return platform_driver_register(&ubicom32_flash_driver);
-+}
-+
-+
-+static void ubicom32_flash_driver_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32_flash_driver);
-+}
-+
-+
-+module_init(ubicom32_flash_driver_init);
-+module_exit(ubicom32_flash_driver_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Mike Lavender");
-+MODULE_DESCRIPTION("Ubicom32 MTD SPI driver for ST M25Pxx flash chips");
-diff -ruN linux-2.6.30.10/drivers/mtd/devices/ubi32-nand-spi-er.c linux-2.6.30.10-ubi/drivers/mtd/devices/ubi32-nand-spi-er.c
---- linux-2.6.30.10/drivers/mtd/devices/ubi32-nand-spi-er.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/mtd/devices/ubi32-nand-spi-er.c 2009-12-11 11:45:16.000000000 +0200
-@@ -0,0 +1,1188 @@
-+/*
-+ * Micron SPI-ER NAND Flash Memory
-+ * This code uses the built in Ubicom flash controller
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+*/
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/err.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define DRIVER_NAME "ubi32-nand-spi-er"
-+#define UBI32_NAND_SPI_ER_BLOCK_FROM_ROW(row) (row >> 6)
-+
-+#define UBI32_NAND_SPI_ER_STATUS_P_FAIL (1 << 3)
-+#define UBI32_NAND_SPI_ER_STATUS_E_FAIL (1 << 2)
-+#define UBI32_NAND_SPI_ER_STATUS_OIP (1 << 0)
-+
-+#define UBI32_NAND_SPI_ER_LAST_ROW_INVALID 0xFFFFFFFF
-+#define UBI32_NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET 0x08
-+
-+struct ubi32_nand_spi_er_device {
-+ const char *name;
-+
-+ uint16_t id;
-+
-+ unsigned int blocks;
-+ unsigned int pages_per_block;
-+ unsigned int page_size;
-+ unsigned int write_size;
-+ unsigned int erase_size;
-+};
-+
-+struct ubi32_nand_spi_er {
-+ char name[24];
-+
-+ const struct ubi32_nand_spi_er_device *device;
-+
-+ struct mutex lock;
-+ struct platform_device *pdev;
-+
-+ struct mtd_info mtd;
-+
-+ unsigned int last_row; /* the last row we fetched */
-+
-+ /*
-+ * Bad block table (MUST be last in strcuture)
-+ */
-+ unsigned long nbb;
-+ unsigned long bbt[0];
-+};
-+
-+/*
-+ * Chip supports a write_size of 512, but we cannot do partial
-+ * page with command 0x84.
-+ *
-+ * We need to use command 0x84 because we cannot fill the FIFO fast
-+ * enough to transfer the whole 512 bytes at a time. (maybe through
-+ * OCM?)
-+ */
-+const struct ubi32_nand_spi_er_device ubi32_nand_spi_er_devices[] = {
-+ {
-+ name: "MT29F1G01ZDC",
-+ id: 0x2C12,
-+ blocks: 1024,
-+ pages_per_block: 64,
-+ page_size: 2048,
-+ write_size: 2048,
-+ erase_size: 64 * 2048,
-+ },
-+ {
-+ name: "MT29F1G01ZDC",
-+ id: 0x2C13,
-+ blocks: 1024,
-+ pages_per_block: 64,
-+ page_size: 2048,
-+ write_size: 2048,
-+ erase_size: 64 * 2048,
-+ },
-+};
-+
-+static int read_only = 0;
-+module_param(read_only, int, 0);
-+MODULE_PARM_DESC(read_only, "Leave device locked");
-+
-+/*
-+ * Ubicom32 FLASH Command Set
-+ */
-+#define FLASH_PORT RA
-+
-+#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */
-+#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */
-+#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */
-+
-+#define FLASH_COMMAND_KICK_OFF(io) \
-+ asm volatile( \
-+ " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
-+ " jmpt.t .+4 \n\t" \
-+ " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \
-+ : \
-+ : "a" (io) \
-+ : "cc" \
-+ );
-+
-+#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \
-+ asm volatile( \
-+ " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
-+ " jmpeq.f .-4 \n\t" \
-+ : \
-+ : "a" (io) \
-+ : "cc" \
-+ );
-+
-+#define FLASH_COMMAND_EXEC(io) \
-+ FLASH_COMMAND_KICK_OFF(io) \
-+ FLASH_COMMAND_WAIT_FOR_COMPLETION(io)
-+
-+/*
-+ * ubi32_nand_spi_er_get_feature
-+ * Get Feature register
-+ */
-+static uint8_t ubi32_nand_spi_er_get_feature(uint32_t reg)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ /*
-+ * Note that this will produce the sequence:
-+ * SI [0F][REG][00][00]
-+ * SO ---------[SR][SR][SR]
-+ * Since the flash controller can only output 24 bits of address, this is
-+ * ok for this command since the data will just repeat as long as the CS
-+ * is asserted and the clock is running.
-+ */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | IO_XFL_CTL1_FC_DATA(1) |
-+ IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x0F) | IO_XFL_CTL2_FC_ADDR(reg << 16);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ return io->status1 & 0xFF;
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_write_buf
-+ * writes a buffer to the bus
-+ *
-+ * Writes 511 + 1 bytes to the bus, we have to stuff one data byte into the address.
-+ */
-+static void ubi32_nand_spi_er_write_buf(const uint8_t *buf, uint32_t col)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+ uint32_t tmp;
-+
-+ asm volatile (
-+ " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
-+ " pipe_flush 0 \n\t"
-+ :
-+ : [port] "a" (FLASH_PORT)
-+ : "cc"
-+ );
-+
-+ /*
-+ * Write the data into the cache
-+ */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+#ifdef SUPPORT_512_FIFO
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(511) |
-+#endif
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(31) |
-+ IO_XFL_CTL1_FC_ADDR;
-+
-+ /*
-+ * Construct the address with the first byte of data
-+ */
-+ tmp = (col << 8) | *buf++;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x84) | IO_XFL_CTL2_FC_ADDR(tmp);
-+
-+ asm volatile (
-+
-+ /*
-+ * Move 32 bytes
-+ *
-+ * The first word needs to be [11][22][33][33] to work around a flash
-+ * controller bug.
-+ */
-+ " move.2 %[tmp], (%[data])2++ \n\t"
-+ " shmrg.1 %[tmp], (%[data]), %[tmp] \n\t"
-+ " shmrg.1 %[tmp], (%[data])1++, %[tmp] \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), %[tmp] \n\t"
-+
-+ /*
-+ * We're aligned again!
-+ */
-+ " .rept 7 \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
-+ " .endr \n\t"
-+
-+ /*
-+ * Kick off the flash command
-+ */
-+ " bset "D(IO_INT_CLR)"(%[port]), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t"
-+ " jmpt.t .+4 \n\t"
-+ " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_XFL_INT_START)") \n\t"
-+
-+#ifdef SUPPORT_512_FIFO
-+ /*
-+ * Fill the remaining 120 words as space becomes available
-+ */
-+ "1: \n\t"
-+ " cmpi "D(IO_FIFO_LEVEL)"(%[port]), #4 \n\t"
-+ " jmpgt.s.t 1b \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), (%[data])4++ \n\t"
-+ " add.4 %[cnt], #-4, %[cnt] \n\t"
-+ " jmpgt.t 1b \n\t"
-+#endif
-+ /*
-+ * Wait for the transaction to finish
-+ */
-+ " btst "D(IO_INT_STATUS)"(%[port]), #%%bit("D(IO_XFL_INT_DONE)") \n\t"
-+ " jmpeq.f .-4 \n\t"
-+
-+ : [tmp] "=&d" (tmp),
-+ [data] "+&a" (buf)
-+ : [column] "d" (col),
-+ [port] "a" (FLASH_PORT),
-+ [cnt] "d" (120) // see above comment
-+ : "cc"
-+ );
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_send_rd_addr
-+ * perform FC_RD: CMD + address
-+ */
-+static void ubi32_nand_spi_er_send_rd_addr(uint8_t command, uint32_t address)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | IO_XFL_CTL1_FC_DATA(4) |
-+ IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(command) | IO_XFL_CTL2_FC_ADDR(address);
-+ FLASH_COMMAND_EXEC(io);
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_send_cmd_addr
-+ * perform FC_(xxx): CMD + address
-+ */
-+static void ubi32_nand_spi_er_send_cmd_addr(uint8_t command, uint32_t address)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) | IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(command) | IO_XFL_CTL2_FC_ADDR(address);
-+ FLASH_COMMAND_EXEC(io);
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_write_disable
-+ * clear the write enable bit
-+ */
-+static void ubi32_nand_spi_er_write_disable(void)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x04);
-+ FLASH_COMMAND_EXEC(io);
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_write_enable
-+ * set the write enable bit
-+ */
-+static void ubi32_nand_spi_er_write_enable(void)
-+{
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x06);
-+ FLASH_COMMAND_EXEC(io);
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_busywait
-+ * Wait until the chip is not busy
-+ */
-+static uint8_t ubi32_nand_spi_er_busywait(void)
-+{
-+ int i;
-+ uint8_t data;
-+
-+ /*
-+ * tRD is 100us, so don't delay too long, however, tERS is
-+ * 10ms so you'd better loop enough.
-+ */
-+ for (i = 0; i < 200; i++) {
-+ data = ubi32_nand_spi_er_get_feature(0xC0);
-+ if (!(data & UBI32_NAND_SPI_ER_STATUS_OIP)) {
-+ break;
-+ }
-+
-+ udelay(50);
-+ }
-+
-+ return data;
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_erase
-+ * Erase a block, parameters must be block aligned
-+ */
-+static int ubi32_nand_spi_er_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct ubi32_nand_spi_er *chip = mtd->priv;
-+ int res;
-+
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: erase addr:%x len:%x\n", chip->name, instr->addr, instr->len);
-+
-+ if ((instr->addr + instr->len) > mtd->size) {
-+ return -EINVAL;
-+ }
-+
-+ if (instr->addr & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: erase address is not aligned %x\n", chip->name, instr->addr);
-+ return -EINVAL;
-+ }
-+
-+ if (instr->len & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: erase len is not aligned %x\n", chip->name, instr->len);
-+ return -EINVAL;
-+ }
-+
-+ mutex_lock(&chip->lock);
-+ chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ while (instr->len) {
-+ uint32_t block = instr->addr >> 17;
-+ uint32_t row = block << 6;
-+ uint8_t stat;
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: block erase row:%x block:%x addr:%x rem:%x\n", chip->name, row, block, instr->addr, instr->len);
-+
-+ /*
-+ * Test for bad block
-+ */
-+ if (test_bit(block, chip->bbt)) {
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ res = -EBADMSG;
-+ goto done;
-+ }
-+
-+ ubi32_nand_spi_er_write_enable();
-+
-+ /*
-+ * Block erase
-+ */
-+ ubi32_nand_spi_er_send_cmd_addr(0xD8, row);
-+
-+ /*
-+ * Wait
-+ */
-+ stat = ubi32_nand_spi_er_busywait();
-+ if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ res = -EIO;
-+ goto done;
-+ }
-+
-+ /*
-+ * Check the status register
-+ */
-+ if (stat & UBI32_NAND_SPI_ER_STATUS_E_FAIL) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: E_FAIL signalled (%02x)\n", chip->name, stat);
-+ instr->fail_addr = block << 17;
-+ instr->state = MTD_ERASE_FAILED;
-+ goto done;
-+ }
-+
-+ /*
-+ * Next
-+ */
-+ block++;
-+ instr->len -= chip->device->erase_size;
-+ instr->addr += chip->device->erase_size;
-+ }
-+
-+ instr->state = MTD_ERASE_DONE;
-+
-+ mutex_unlock(&chip->lock);
-+ return 0;
-+
-+done:
-+ ubi32_nand_spi_er_write_disable();
-+
-+ mutex_unlock(&chip->lock);
-+
-+ mtd_erase_callback(instr);
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_read
-+ *
-+ * return -EUCLEAN: ecc error recovered
-+ * return -EBADMSG: ecc error not recovered
-+*/
-+static int ubi32_nand_spi_er_read(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
-+{
-+ struct ubi32_nand_spi_er *chip = mtd->priv;
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ uint32_t row;
-+ uint32_t column;
-+ int retval = 0;
-+ uint32_t *pbuf = (uint32_t *)buf;
-+
-+ *retlen = 0;
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: read block from %llx len %d into %p\n", chip->name, from, len, buf);
-+
-+ /*
-+ * buf should be aligned
-+ */
-+ if ((uint32_t)buf & 0x03) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Zero length reads, nothing to do
-+ */
-+ if (len == 0) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Reject reads which go over the end of the flash
-+ */
-+ if ((from + len) > mtd->size) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Get the row and column address to start at
-+ */
-+ row = from >> 11;
-+ column = from & 0x7FF;
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: row=%x %d column=%x %d last_row=%x %d\n", chip->name, row, row, column, column, chip->last_row, chip->last_row);
-+
-+ /*
-+ * Read the data from the chip
-+ */
-+ mutex_lock(&chip->lock);
-+ while (len) {
-+ uint8_t stat;
-+ size_t toread;
-+ int i;
-+ int tmp;
-+
-+ /*
-+ * Figure out how much to read
-+ *
-+ * If we are reading from the middle of a page then the most we
-+ * can read is to the end of the page
-+ */
-+ toread = len;
-+ if (toread > (chip->device->page_size - column)) {
-+ toread = chip->device->page_size - column;
-+ }
-+
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: buf=%p toread=%x row=%x column=%x last_row=%x\n", chip->name, pbuf, toread, row, column, chip->last_row);
-+
-+ if (chip->last_row != row) {
-+ /*
-+ * Check if the block is bad
-+ */
-+ if (test_bit(UBI32_NAND_SPI_ER_BLOCK_FROM_ROW(row), chip->bbt)) {
-+ mutex_unlock(&chip->lock);
-+ return -EBADMSG;
-+ }
-+
-+ /*
-+ * Load the appropriate page
-+ */
-+ ubi32_nand_spi_er_send_cmd_addr(0x13, row);
-+
-+ /*
-+ * Wait
-+ */
-+ stat = ubi32_nand_spi_er_busywait();
-+ if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ mutex_unlock(&chip->lock);
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check the ECC bits
-+ */
-+ stat >>= 4;
-+ if (stat == 1) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: ECC recovered, row=%x\n", chip->name, row);
-+ retval = -EUCLEAN;
-+ }
-+ if (stat == 2) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: failed ECC, row=%x\n", chip->name, row);
-+ chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-+ mutex_unlock(&chip->lock);
-+ return -EBADMSG;
-+ }
-+
-+ }
-+
-+ chip->last_row = row;
-+
-+ /*
-+ * Read out the data:
-+ * We can always read a little too much since there is the
-+ * OOB after byte addr 2047. The most we'll overread is 3 bytes.
-+ */
-+ if (((uint32_t)pbuf & 0x03) == 0) {
-+ /*
-+ * Aligned read
-+ */
-+ tmp = toread & (~0x03);
-+ for (i = 0; i < tmp; i += 4) {
-+ ubi32_nand_spi_er_send_rd_addr(0x03, column << 8);
-+ *pbuf++ = io->status1;
-+ column += 4;
-+ }
-+ } else {
-+ /*
-+ * Unaligned read
-+ */
-+ tmp = toread & (~0x03);
-+ for (i = 0; i < tmp; i += 4) {
-+ ubi32_nand_spi_er_send_rd_addr(0x03, column << 8);
-+ memcpy(pbuf, &io->status1, 4);
-+ column += 4;
-+ }
-+ }
-+
-+ /*
-+ * Fill in any single bytes
-+ */
-+ tmp = toread & 0x03;
-+ if (tmp) {
-+ uint8_t *bbuf = pbuf;
-+ uint32_t val;
-+ ubi32_nand_spi_er_send_rd_addr(0x03, column << 8);
-+ val = io->status1;
-+ for (i = 0; i < tmp; i++) {
-+ *bbuf++ = val >> 24;
-+ val <<= 8;
-+ }
-+ }
-+
-+ len -= toread;
-+ *retlen += toread;
-+
-+ /*
-+ * For the next page, increment the row and always start at column 0
-+ */
-+ column = 0;
-+ row++;
-+ }
-+
-+ mutex_unlock(&chip->lock);
-+ return retval;
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_write
-+ */
-+#define WRITE_NOT_ALIGNED(x) ((x & (device->write_size - 1)) != 0)
-+static int ubi32_nand_spi_er_write(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const u_char *buf)
-+{
-+ struct ubi32_nand_spi_er *chip = mtd->priv;
-+ const struct ubi32_nand_spi_er_device *device = chip->device;
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+ uint32_t row;
-+ uint32_t col;
-+ int res = 0;
-+ size_t towrite;
-+
-+ DEBUG(MTD_DEBUG_LEVEL2, "%s: write block to %llx len %d from %p\n", chip->name, to, len, buf);
-+
-+ *retlen = 0;
-+
-+ /*
-+ * nothing to write
-+ */
-+ if (!len) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Reject writes which go over the end of the flash
-+ */
-+ if ((to + len) > mtd->size) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * buf should be aligned to 16 bits
-+ */
-+ if ((uint32_t)buf & 0x01) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Check to see if everything is page aligned
-+ */
-+ if (WRITE_NOT_ALIGNED(to) || WRITE_NOT_ALIGNED(len)) {
-+ printk(KERN_NOTICE "ubi32_nand_spi_er_write: Attempt to write non page aligned data\n");
-+ return -EINVAL;
-+ }
-+
-+ mutex_lock(&chip->lock);
-+
-+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-+
-+ chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ /*
-+ * If the first write is a partial write then write at most the number of
-+ * bytes to get us page aligned and then the remainder will be
-+ * page aligned. The last bit may be a partial page as well.
-+ */
-+ col = to & (device->page_size - 1);
-+ towrite = device->page_size - col;
-+ if (towrite > len) {
-+ towrite = len;
-+ }
-+
-+ /*
-+ * Write the data
-+ */
-+ row = to >> 11;
-+ while (len) {
-+ uint8_t stat;
-+ uint32_t my_towrite;
-+
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: write %p to row:%x col:%x len:%x rem:%x\n", chip->name, buf, row, col, towrite, len);
-+
-+ ubi32_nand_spi_er_write_enable();
-+
-+ /*
-+ * Move the data into the cache
-+ */
-+ my_towrite = towrite;
-+ while (my_towrite) {
-+ uint32_t len = my_towrite;
-+ if (len > 32) {
-+ len = 32;
-+ }
-+
-+ ubi32_nand_spi_er_write_buf(buf, col);
-+ buf += len;
-+ col += len;
-+ my_towrite -= len;
-+ }
-+
-+ /*
-+ * Program execute
-+ */
-+ ubi32_nand_spi_er_send_cmd_addr(0x10, row);
-+
-+ /*
-+ * Wait
-+ */
-+ stat = ubi32_nand_spi_er_busywait();
-+ if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ res = -EIO;
-+ goto done;
-+ }
-+
-+ if (stat & (1 << 3)) {
-+ res = -EBADMSG;
-+ goto done;
-+ }
-+
-+ row++;
-+ len -= towrite;
-+ *retlen += towrite;
-+
-+ /*
-+ * At this point, we are always page aligned so start at column 0.
-+ * Note we may not have a full page to write at the end, hence the
-+ * check if towrite > len.
-+ */
-+ col = 0;
-+ towrite = device->page_size;
-+ if (towrite > len) {
-+ towrite = len;
-+ }
-+ }
-+
-+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-+
-+ mutex_unlock(&chip->lock);
-+ return res;
-+
-+done:
-+ ubi32_nand_spi_er_write_disable();
-+
-+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-+
-+ mutex_unlock(&chip->lock);
-+
-+ return res;
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_isbad
-+ */
-+static int ubi32_nand_spi_er_isbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct ubi32_nand_spi_er *chip = mtd->priv;
-+ uint32_t block;
-+
-+ if (ofs & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
-+ return -EINVAL;
-+ }
-+
-+ block = ofs >> 17;
-+
-+ return test_bit(block, chip->bbt);
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_markbad
-+ */
-+static int ubi32_nand_spi_er_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct ubi32_nand_spi_er *chip = mtd->priv;
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+ uint32_t block;
-+ uint32_t row;
-+ int res = 0;
-+ uint8_t stat;
-+
-+ if (ofs & (chip->device->erase_size - 1)) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: address not aligned %llx\n", chip->name, ofs);
-+ return -EINVAL;
-+ }
-+
-+ block = ofs >> 17;
-+
-+ /*
-+ * If it's already marked bad, no need to mark it
-+ */
-+ if (test_bit(block, chip->bbt)) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Mark it in our cache
-+ */
-+ __set_bit(block, chip->bbt);
-+
-+ /*
-+ * Write the user bad block mark. If it fails, then we really
-+ * can't do anything about it.
-+ */
-+ mutex_lock(&chip->lock);
-+ chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ ubi32_nand_spi_er_write_enable();
-+
-+ /*
-+ * Write the mark
-+ */
-+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(6);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x84);
-+
-+ asm volatile (
-+ " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
-+ " pipe_flush 0 \n\t"
-+
-+ /*
-+ * Move the data into the FIFO
-+ */
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), %[word1] \n\t"
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), %[word2] \n\t"
-+
-+ /*
-+ * Kick off the flash command
-+ */
-+ " bset "D(IO_INT_CLR)"(%[port]), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t"
-+ " jmpt.t .+4 \n\t"
-+ " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_XFL_INT_START)") \n\t"
-+
-+ /*
-+ * Wait for the transaction to finish
-+ */
-+ " btst "D(IO_INT_STATUS)"(%[port]), #%%bit("D(IO_XFL_INT_DONE)") \n\t"
-+ " jmpeq.f .-4 \n\t"
-+
-+ :
-+ : [word1] "d" (0x0800dead | (UBI32_NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET << 16)),
-+ [word2] "d" (0xbeef0000),
-+ [port] "a" (FLASH_PORT)
-+ : "cc"
-+ );
-+
-+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-+
-+ /*
-+ * Program execute
-+ */
-+ row = block << 6;
-+ ubi32_nand_spi_er_send_cmd_addr(0x10, row);
-+
-+ /*
-+ * Wait
-+ */
-+ stat = ubi32_nand_spi_er_busywait();
-+ if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ res = -EIO;
-+ goto done;
-+ }
-+
-+ if (stat & (1 << 3)) {
-+ res = -EBADMSG;
-+ }
-+
-+done:
-+ ubi32_nand_spi_er_write_disable();
-+
-+ mutex_unlock(&chip->lock);
-+
-+ return res;
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_read_bbt
-+ */
-+static int ubi32_nand_spi_er_read_bbt(struct ubi32_nand_spi_er *chip)
-+{
-+ int j;
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ for (j = 0; j < chip->device->blocks; j++) {
-+ unsigned short row = j << 6;
-+ uint8_t stat;
-+
-+ /*
-+ * Read Page
-+ */
-+ ubi32_nand_spi_er_send_cmd_addr(0x13, row);
-+
-+ /*
-+ * Wait
-+ */
-+ stat = ubi32_nand_spi_er_busywait();
-+ if (stat & UBI32_NAND_SPI_ER_STATUS_OIP) {
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: chip is busy or nonresponsive stat=%02x\n", chip->name, stat);
-+
-+ /*
-+ * Chip is stuck?
-+ */
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check factory bad block mark
-+ */
-+ ubi32_nand_spi_er_send_rd_addr(0x03, 0x080000);
-+
-+ if ((io->status1 >> 24) != 0xFF) {
-+ chip->nbb++;
-+ __set_bit(j, chip->bbt);
-+ continue;
-+ }
-+
-+ ubi32_nand_spi_er_send_rd_addr(0x03, 0x080000 | (UBI32_NAND_SPI_ER_BAD_BLOCK_MARK_OFFSET << 8));
-+ if (io->status1 == 0xdeadbeef) {
-+ chip->nbb++;
-+ __set_bit(j, chip->bbt);
-+ }
-+ }
-+
-+#if defined(CONFIG_MTD_DEBUG) && (MTD_DEBUG_LEVEL3 <= CONFIG_MTD_DEBUG_VERBOSE)
-+ printk("%s: Bad Block Table:", chip->name);
-+ for (j = 0; j < chip->device->blocks; j++) {
-+ if ((j % 64) == 0) {
-+ printk("\n%s: block %03x: ", chip->name, j);
-+ }
-+ printk("%c", test_bit(j, chip->bbt) ? 'X' : '.');
-+ }
-+ printk("\n%s: Bad Block Numbers: ", chip->name);
-+ for (j = 0; j < chip->device->blocks; j++) {
-+ if (test_bit(j, chip->bbt)) {
-+ printk("%x ", j);
-+ }
-+ }
-+ printk("\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+#ifndef MODULE
-+/*
-+ * Called at boot time:
-+ *
-+ * ubi32_nand_spi_er=read_only
-+ * if read_only specified then do not unlock device
-+ */
-+static int __init ubi32_nand_spi_er_setup(char *str)
-+{
-+ if (str && (strncasecmp(str, "read_only", 9) == 0)) {
-+ read_only = 1;
-+ }
-+ return 0;
-+}
-+
-+__setup("ubi32_nand_spi_er=", ubi32_nand_spi_er_setup);
-+#endif
-+
-+/*
-+ * ubi32_nand_spi_er_probe
-+ * Detect and initialize ubi32_nand_spi_er device.
-+ */
-+static int __devinit ubi32_nand_spi_er_probe(struct platform_device *pdev)
-+{
-+ uint32_t i;
-+ uint32_t id;
-+ int res;
-+ size_t bbt_bytes;
-+ struct ubi32_nand_spi_er *chip;
-+ const struct ubi32_nand_spi_er_device *device;
-+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)FLASH_PORT;
-+
-+ /*
-+ * Reset
-+ */
-+ for (i = 0; i < 2; i++) {
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0xFF);
-+ FLASH_COMMAND_EXEC(io);
-+ udelay(250);
-+ }
-+ udelay(1000);
-+
-+ /*
-+ * Read out ID
-+ */
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | IO_XFL_CTL1_FC_DATA(2) |
-+ IO_XFL_CTL1_FC_ADDR;
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x9F);
-+ FLASH_COMMAND_EXEC(io);
-+
-+ id = io->status1 >> 16;
-+ device = ubi32_nand_spi_er_devices;
-+ for (i = 0; i < ARRAY_SIZE(ubi32_nand_spi_er_devices); i++) {
-+ if (device->id == id) {
-+ break;
-+ }
-+ device++;
-+ }
-+ if (i == ARRAY_SIZE(ubi32_nand_spi_er_devices)) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Initialize our chip structure
-+ */
-+ bbt_bytes = DIV_ROUND_UP(device->blocks, BITS_PER_BYTE);
-+ chip = kzalloc(sizeof(struct ubi32_nand_spi_er) + bbt_bytes, GFP_KERNEL);
-+ if (!chip) {
-+ return -ENOMEM;
-+ }
-+ snprintf(chip->name, sizeof(chip->name), "%s", device->name);
-+
-+ chip->device = device;
-+ chip->last_row = UBI32_NAND_SPI_ER_LAST_ROW_INVALID;
-+
-+ mutex_init(&chip->lock);
-+
-+ chip->mtd.type = MTD_NANDFLASH;
-+ chip->mtd.flags = MTD_WRITEABLE;
-+
-+ /*
-+ * #blocks * block size * n blocks
-+ */
-+ chip->mtd.size = device->blocks * device->pages_per_block * device->page_size;
-+ chip->mtd.erasesize = device->erase_size;
-+
-+ /*
-+ * 1 page, optionally we can support partial write (512)
-+ */
-+ chip->mtd.writesize = device->write_size;
-+ chip->mtd.name = device->name;
-+ chip->mtd.erase = ubi32_nand_spi_er_erase;
-+ chip->mtd.read = ubi32_nand_spi_er_read;
-+ chip->mtd.write = ubi32_nand_spi_er_write;
-+ chip->mtd.block_isbad = ubi32_nand_spi_er_isbad;
-+ chip->mtd.block_markbad = ubi32_nand_spi_er_markbad;
-+ chip->mtd.priv = chip;
-+
-+ /*
-+ * Cache the bad block table
-+ */
-+ res = ubi32_nand_spi_er_read_bbt(chip);
-+ if (res) {
-+ kfree(chip);
-+ return res;
-+ }
-+
-+ /*
-+ * Un/lock the chip
-+ */
-+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
-+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
-+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | IO_XFL_CTL1_FC_DATA(2);
-+ io->ctl2 = IO_XFL_CTL2_FC_CMD(0x1F);
-+
-+ if (read_only) {
-+ i = 0xa0380000;
-+ } else {
-+ i = 0xa0000000;
-+ }
-+ asm volatile (
-+ " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
-+ " pipe_flush 0 \n\t"
-+
-+ /*
-+ * Move the data into the FIFO
-+ */
-+ " move.4 "D(IO_TX_FIFO)"(%[port]), %[word1] \n\t"
-+
-+ /*
-+ * Kick off the flash command
-+ */
-+ " bset "D(IO_INT_CLR)"(%[port]), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t"
-+ " jmpt.t .+4 \n\t"
-+ " bset "D(IO_INT_SET)"(%[port]), #0, #%%bit("D(IO_XFL_INT_START)") \n\t"
-+
-+ /*
-+ * Wait for the transaction to finish
-+ */
-+ " btst "D(IO_INT_STATUS)"(%[port]), #%%bit("D(IO_XFL_INT_DONE)") \n\t"
-+ " jmpeq.f .-4 \n\t"
-+
-+ :
-+ : [word1] "d" (i),
-+ [port] "a" (FLASH_PORT)
-+ : "cc"
-+ );
-+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
-+
-+ dev_set_drvdata(&pdev->dev, chip);
-+
-+ printk(KERN_INFO "%s: added device size: %u KBytes %lu bad blocks %s\n", chip->mtd.name, DIV_ROUND_UP(chip->mtd.size, 1024), chip->nbb, read_only ? "[read only]" : "");
-+ return add_mtd_device(&chip->mtd);
-+}
-+
-+/*
-+ * ubi32_nand_spi_er_remove
-+ */
-+static int __devexit ubi32_nand_spi_er_remove(struct platform_device *pdev)
-+{
-+ struct ubi32_nand_spi_er *chip = dev_get_drvdata(&pdev->dev);
-+ int status;
-+
-+ DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", chip->name);
-+
-+ status = del_mtd_device(&chip->mtd);
-+ if (status == 0) {
-+ kfree(chip);
-+ }
-+
-+ dev_set_drvdata(&pdev->dev, NULL);
-+ return status;
-+}
-+
-+static struct platform_device *ubi32_nand_spi_er_device;
-+
-+static struct platform_driver ubi32_nand_spi_er_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .probe = ubi32_nand_spi_er_probe,
-+ .remove = ubi32_nand_spi_er_remove,
-+};
-+
-+/*
-+ * ubi32_nand_spi_er_init
-+ */
-+static int __init ubi32_nand_spi_er_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&ubi32_nand_spi_er_driver);
-+
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ ubi32_nand_spi_er_device = platform_device_alloc(DRIVER_NAME, 0);
-+ if (!ubi32_nand_spi_er_device) {
-+ return -ENOMEM;
-+ }
-+
-+ ret = platform_device_add(ubi32_nand_spi_er_device);
-+ if (ret) {
-+ platform_device_put(ubi32_nand_spi_er_device);
-+ platform_driver_unregister(&ubi32_nand_spi_er_driver);
-+ }
-+
-+ return ret;
-+}
-+module_init(ubi32_nand_spi_er_init);
-+
-+/*
-+ * ubi32_nand_spi_er_exit
-+ */
-+static void __exit ubi32_nand_spi_er_exit(void)
-+{
-+ platform_device_unregister(ubi32_nand_spi_er_device);
-+ platform_driver_unregister(&ubi32_nand_spi_er_driver);
-+}
-+module_exit(ubi32_nand_spi_er_exit);
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("MTD ubi32_nand_spi_er driver for ubicom32 SPI flash controller.");
-diff -ruN linux-2.6.30.10/drivers/net/Kconfig linux-2.6.30.10-ubi/drivers/net/Kconfig
---- linux-2.6.30.10/drivers/net/Kconfig 2009-12-14 11:47:19.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/net/Kconfig 2009-12-14 11:47:17.000000000 +0200
-@@ -2540,6 +2540,19 @@
- To compile this driver as a module, choose M here. The module
- will be called jme.
-
-+config UBICOM32_GMAC
-+ tristate "Ubicom Gigabit Ethernet support"
-+ depends on UBICOM32
-+ help
-+ Gigabit Ethernet support for ubicom32 processors
-+
-+config UBICOM32_OCM_FOR_SKB
-+ bool "USE OCM for SKB (EXPERIMENTAL)"
-+ depends on UBICOM32_GMAC
-+ default n
-+ help
-+ Allocate skb from OCM for Ethernet Receive when possible
-+
- endif # NETDEV_1000
-
- #
-diff -ruN linux-2.6.30.10/drivers/net/Makefile linux-2.6.30.10-ubi/drivers/net/Makefile
---- linux-2.6.30.10/drivers/net/Makefile 2009-12-14 11:48:38.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/net/Makefile 2009-12-14 11:48:40.000000000 +0200
-@@ -272,3 +272,5 @@
- obj-$(CONFIG_SFC) += sfc/
-
- obj-$(CONFIG_WIMAX) += wimax/
-+
-+obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
-diff -ruN linux-2.6.30.10/drivers/net/ubi32-eth.c linux-2.6.30.10-ubi/drivers/net/ubi32-eth.c
---- linux-2.6.30.10/drivers/net/ubi32-eth.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/net/ubi32-eth.c 2009-12-11 11:45:18.000000000 +0200
-@@ -0,0 +1,760 @@
-+/*
-+ * drivers/net/ubi32-eth.c
-+ * Ubicom32 ethernet TIO interface driver.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+/*
-+ * ubi32_eth.c
-+ * Ethernet driver for Ip5k/Ip7K
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/moduleparam.h>
-+
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+
-+#include <linux/in.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/mii.h>
-+#include <linux/if_vlan.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/skbuff.h>
-+#include <asm/checksum.h>
-+#include <asm/ip5000.h>
-+#include <asm/devtree.h>
-+#include <asm/system.h>
-+
-+#define UBICOM32_USE_NAPI /* define this to use NAPI instead of tasklet */
-+//#define UBICOM32_USE_POLLING /* define this to use polling instead of interrupt */
-+#include "ubi32-eth.h"
-+
-+/*
-+ * TODO:
-+ * mac address from flash
-+ * multicast filter
-+ * ethtool support
-+ * sysfs support
-+ * skb->nrfrag support
-+ * ioctl
-+ * monitor phy status
-+ */
-+
-+extern int ubi32_ocm_skbuf_max, ubi32_ocm_skbuf, ubi32_ddr_skbuf;
-+static const char *eth_if_name[UBI32_ETH_NUM_OF_DEVICES] =
-+ {"eth_lan", "eth_wan"};
-+static struct net_device *ubi32_eth_devices[UBI32_ETH_NUM_OF_DEVICES] =
-+ {NULL, NULL};
-+static u8_t mac_addr[UBI32_ETH_NUM_OF_DEVICES][ETH_ALEN] = {
-+ {0x00, 0x03, 0x64, 'l', 'a', 'n'},
-+ {0x00, 0x03, 0x64, 'w', 'a', 'n'}};
-+
-+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
-+static inline struct sk_buff *ubi32_alloc_skb_ocm(struct net_device *dev, unsigned int length)
-+{
-+ return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
-+}
-+#endif
-+
-+static inline struct sk_buff *ubi32_alloc_skb(struct net_device *dev, unsigned int length)
-+{
-+ return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN);
-+}
-+
-+static void ubi32_eth_vp_rxtx_enable(struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ priv->regs->command = UBI32_ETH_VP_CMD_RX_ENABLE | UBI32_ETH_VP_CMD_TX_ENABLE;
-+ priv->regs->int_mask = (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
-+ ubicom32_set_interrupt(priv->vp_int_bit);
-+}
-+
-+static void ubi32_eth_vp_rxtx_stop(struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ priv->regs->command = 0;
-+ priv->regs->int_mask = 0;
-+ ubicom32_set_interrupt(priv->vp_int_bit);
-+
-+ /* Wait for graceful shutdown */
-+ while (priv->regs->status & (UBI32_ETH_VP_STATUS_RX_STATE | UBI32_ETH_VP_STATUS_TX_STATE));
-+}
-+
-+/*
-+ * ubi32_eth_tx_done()
-+ */
-+static int ubi32_eth_tx_done(struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv;
-+ struct sk_buff *skb;
-+ volatile void *pdata;
-+ struct ubi32_eth_dma_desc *desc;
-+ u32_t count = 0;
-+
-+ priv = netdev_priv(dev);
-+
-+ priv->regs->int_status &= ~UBI32_ETH_VP_INT_TX;
-+ while (priv->tx_tail != priv->regs->tx_out) {
-+ pdata = priv->regs->tx_dma_ring[priv->tx_tail];
-+ BUG_ON(pdata == NULL);
-+
-+ skb = container_of((void *)pdata, struct sk_buff, cb);
-+ desc = (struct ubi32_eth_dma_desc *)pdata;
-+ if (unlikely(!(desc->status & UBI32_ETH_VP_TX_OK))) {
-+ dev->stats.tx_errors++;
-+ } else {
-+ dev->stats.tx_packets++;
-+ dev->stats.tx_bytes += skb->len;
-+ }
-+ dev_kfree_skb_any(skb);
-+ priv->regs->tx_dma_ring[priv->tx_tail] = NULL;
-+ priv->tx_tail = (priv->tx_tail + 1) & TX_DMA_RING_MASK;
-+ count++;
-+ }
-+
-+ if (unlikely(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
-+ spin_lock(&priv->lock);
-+ if (priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL) {
-+ priv->regs->status &= ~UBI32_ETH_VP_STATUS_TX_Q_FULL;
-+ netif_wake_queue(dev);
-+ }
-+ spin_unlock(&priv->lock);
-+ }
-+ return count;
-+}
-+
-+/*
-+ * ubi32_eth_receive()
-+ * To avoid locking overhead, this is called only
-+ * by tasklet when not using NAPI, or
-+ * by NAPI poll when using NAPI.
-+ * return number of frames processed
-+ */
-+static int ubi32_eth_receive(struct net_device *dev, int quota)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ unsigned short rx_in = priv->regs->rx_in;
-+ struct sk_buff *skb;
-+ struct ubi32_eth_dma_desc *desc = NULL;
-+ volatile void *pdata;
-+
-+ int extra_reserve_adj;
-+ int extra_alloc = UBI32_ETH_RESERVE_SPACE + UBI32_ETH_TRASHED_MEMORY;
-+ int replenish_cnt, count = 0;
-+ int replenish_max = RX_DMA_MAX_QUEUE_SIZE;
-+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
-+ if (likely(dev == ubi32_eth_devices[0]))
-+ replenish_max = min(ubi32_ocm_skbuf_max, RX_DMA_MAX_QUEUE_SIZE);;
-+#endif
-+
-+ if (unlikely(rx_in == priv->regs->rx_out))
-+ priv->vp_stats.rx_q_full_cnt++;
-+
-+ priv->regs->int_status &= ~UBI32_ETH_VP_INT_RX;
-+ while (priv->rx_tail != priv->regs->rx_out) {
-+ if (unlikely(count == quota)) {
-+ /* There is still frame pending to be processed */
-+ priv->vp_stats.rx_throttle++;
-+ break;
-+ }
-+
-+ pdata = priv->regs->rx_dma_ring[priv->rx_tail];
-+ BUG_ON(pdata == NULL);
-+
-+ desc = (struct ubi32_eth_dma_desc *)pdata;
-+ skb = container_of((void *)pdata, struct sk_buff, cb);
-+ count++;
-+ priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
-+ priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
-+
-+ /*
-+ * Check only RX_OK bit here.
-+ * The rest of status word is used as timestamp
-+ */
-+ if (unlikely(!(desc->status & UBI32_ETH_VP_RX_OK))) {
-+ dev->stats.rx_errors++;
-+ dev_kfree_skb_any(skb);
-+ continue;
-+ }
-+
-+ skb_put(skb, desc->data_len);
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ skb->ip_summed = CHECKSUM_NONE;
-+ dev->stats.rx_bytes += skb->len;
-+ dev->stats.rx_packets++;
-+#ifndef UBICOM32_USE_NAPI
-+ netif_rx(skb);
-+#else
-+ netif_receive_skb(skb);
-+#endif
-+ }
-+
-+ /* fill in more descripor for VP*/
-+ replenish_cnt = replenish_max -
-+ ((RX_DMA_RING_SIZE + rx_in - priv->rx_tail) & RX_DMA_RING_MASK);
-+ if (replenish_cnt > 0) {
-+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
-+ /*
-+ * black magic for perforamnce:
-+ * Try to allocate skb from OCM only for first Ethernet I/F.
-+ * Also limit number of RX buffers to 21 due to limited OCM.
-+ */
-+ if (likely(dev == ubi32_eth_devices[0])) {
-+ do {
-+ skb = ubi32_alloc_skb_ocm(dev, RX_BUF_SIZE + extra_alloc);
-+ if (!skb) {
-+ break;
-+ }
-+ /* set up dma descriptor */
-+ ubi32_ocm_skbuf++;
-+ desc = (struct ubi32_eth_dma_desc *)skb->cb;
-+ extra_reserve_adj =
-+ ((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) &
-+ (CACHE_LINE_SIZE - 1);
-+ skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj);
-+ desc->data_pointer = skb->data;
-+ desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
-+ desc->data_len = 0;
-+ desc->status = 0;
-+ priv->regs->rx_dma_ring[rx_in] = desc;
-+ rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
-+ } while (--replenish_cnt > 0);
-+ }
-+#endif
-+
-+ while (replenish_cnt-- > 0) {
-+ skb = ubi32_alloc_skb(dev, RX_BUF_SIZE + extra_alloc);
-+ if (!skb) {
-+ priv->vp_stats.rx_alloc_err++;
-+ break;
-+ }
-+ /* set up dma descriptor */
-+ ubi32_ddr_skbuf++;
-+ desc = (struct ubi32_eth_dma_desc *)skb->cb;
-+ extra_reserve_adj =
-+ ((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) &
-+ (CACHE_LINE_SIZE - 1);
-+ skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj);
-+ desc->data_pointer = skb->data;
-+ desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
-+ desc->data_len = 0;
-+ desc->status = 0;
-+ priv->regs->rx_dma_ring[rx_in] = desc;
-+ rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
-+ }
-+
-+ wmb();
-+ priv->regs->rx_in = rx_in;
-+ ubicom32_set_interrupt(priv->vp_int_bit);
-+ }
-+
-+ if (likely(count > 0)) {
-+ dev->last_rx = jiffies;
-+ }
-+ return count;
-+}
-+
-+#ifdef UBICOM32_USE_NAPI
-+static int ubi32_eth_napi_poll(struct napi_struct *napi, int budget)
-+{
-+ struct ubi32_eth_private *priv = container_of(napi, struct ubi32_eth_private, napi);
-+ struct net_device *dev = priv->dev;
-+ u32_t count;
-+
-+ if (priv->tx_tail != priv->regs->tx_out) {
-+ ubi32_eth_tx_done(dev);
-+ }
-+
-+ count = ubi32_eth_receive(dev, budget);
-+
-+ if (count < budget) {
-+ napi_complete(napi);
-+ priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
-+ if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
-+ if (napi_reschedule(napi)) {
-+ priv->regs->int_mask = 0;
-+ }
-+ }
-+ }
-+ return count;
-+}
-+
-+#else
-+static void ubi32_eth_do_tasklet(unsigned long arg)
-+{
-+ struct net_device *dev = (struct net_device *)arg;
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+
-+ if (priv->tx_tail != priv->regs->tx_out) {
-+ ubi32_eth_tx_done(dev);
-+ }
-+
-+ /* always call receive to process new RX frame as well as replenish RX buffers */
-+ ubi32_eth_receive(dev, UBI32_RX_BOUND);
-+
-+ priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
-+ if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
-+ priv->regs->int_mask = 0;
-+ tasklet_schedule(&priv->tsk);
-+ }
-+}
-+#endif
-+
-+#if defined(UBICOM32_USE_POLLING)
-+static struct timer_list eth_poll_timer;
-+
-+static void ubi32_eth_poll(unsigned long arg)
-+{
-+ struct net_device *dev;
-+ struct ubi32_eth_private *priv;
-+ int i;
-+
-+ for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
-+ dev = ubi32_eth_devices[i];
-+ if (dev && (dev->flags & IFF_UP)) {
-+ priv = netdev_priv(dev);
-+#ifdef UBICOM32_USE_NAPI
-+ napi_schedule(&priv->napi);
-+#else
-+ tasklet_schedule(&priv->tsk);
-+#endif
-+ }
-+ }
-+
-+ eth_poll_timer.expires = jiffies + 2;
-+ add_timer(ð_poll_timer);
-+}
-+
-+#else
-+static irqreturn_t ubi32_eth_interrupt(int irq, void *dev_id)
-+{
-+ struct ubi32_eth_private *priv;
-+
-+ struct net_device *dev = (struct net_device *)dev_id;
-+ BUG_ON(irq != dev->irq);
-+
-+ priv = netdev_priv(dev);
-+ if (unlikely(!(priv->regs->int_status & priv->regs->int_mask))) {
-+ return IRQ_NONE;
-+ }
-+
-+ /*
-+ * Disable port interrupt
-+ */
-+#ifdef UBICOM32_USE_NAPI
-+ if (napi_schedule_prep(&priv->napi)) {
-+ priv->regs->int_mask = 0;
-+ __napi_schedule(&priv->napi);
-+ }
-+#else
-+ priv->regs->int_mask = 0;
-+ tasklet_schedule(&priv->tsk);
-+#endif
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+/*
-+ * ubi32_eth_open
-+ */
-+static int ubi32_eth_open(struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ int err;
-+
-+ printk(KERN_INFO "eth open %s\n",dev->name);
-+#ifndef UBICOM32_USE_POLLING
-+ /* request_region() */
-+ err = request_irq(dev->irq, ubi32_eth_interrupt, IRQF_DISABLED, dev->name, dev);
-+ if (err) {
-+ printk(KERN_WARNING "fail to request_irq %d\n",err);
-+ return -ENODEV;
-+ }
-+#endif
-+#ifdef UBICOM32_USE_NAPI
-+ napi_enable(&priv->napi);
-+#else
-+ tasklet_init(&priv->tsk, ubi32_eth_do_tasklet, (unsigned long)dev);
-+#endif
-+
-+ /* call receive to supply RX buffers */
-+ ubi32_eth_receive(dev, RX_DMA_MAX_QUEUE_SIZE);
-+
-+ /* check phy status and call netif_carrier_on */
-+ ubi32_eth_vp_rxtx_enable(dev);
-+ netif_start_queue(dev);
-+ return 0;
-+}
-+
-+static int ubi32_eth_close(struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ volatile void *pdata;
-+ struct sk_buff *skb;
-+
-+#ifndef UBICOM32_USE_POLLING
-+ free_irq(dev->irq, dev);
-+#endif
-+ netif_stop_queue(dev); /* can't transmit any more */
-+#ifdef UBICOM32_USE_NAPI
-+ napi_disable(&priv->napi);
-+#else
-+ tasklet_kill(&priv->tsk);
-+#endif
-+ ubi32_eth_vp_rxtx_stop(dev);
-+
-+ /*
-+ * RX clean up
-+ */
-+ while (priv->rx_tail != priv->regs->rx_in) {
-+ pdata = priv->regs->rx_dma_ring[priv->rx_tail];
-+ skb = container_of((void *)pdata, struct sk_buff, cb);
-+ priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
-+ dev_kfree_skb_any(skb);
-+ priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
-+ }
-+ priv->regs->rx_in = 0;
-+ priv->regs->rx_out = priv->regs->rx_in;
-+ priv->rx_tail = priv->regs->rx_in;
-+
-+ /*
-+ * TX clean up
-+ */
-+ BUG_ON(priv->regs->tx_out != priv->regs->tx_in);
-+ ubi32_eth_tx_done(dev);
-+ BUG_ON(priv->tx_tail != priv->regs->tx_in);
-+ priv->regs->tx_in = 0;
-+ priv->regs->tx_out = priv->regs->tx_in;
-+ priv->tx_tail = priv->regs->tx_in;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_eth_set_config
-+ */
-+static int ubi32_eth_set_config(struct net_device *dev, struct ifmap *map)
-+{
-+ /* if must to down to config it */
-+ printk(KERN_INFO "set_config %x\n", dev->flags);
-+ if (dev->flags & IFF_UP)
-+ return -EBUSY;
-+
-+ /* I/O and IRQ can not be changed */
-+ if (map->base_addr != dev->base_addr) {
-+ printk(KERN_WARNING "%s: Can't change I/O address\n", dev->name);
-+ return -EOPNOTSUPP;
-+ }
-+
-+#ifndef UBICOM32_USE_POLLING
-+ if (map->irq != dev->irq) {
-+ printk(KERN_WARNING "%s: Can't change IRQ\n", dev->name);
-+ return -EOPNOTSUPP;
-+ }
-+#endif
-+
-+ /* ignore other fields */
-+ return 0;
-+}
-+
-+static int ubi32_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ struct ubi32_eth_dma_desc *desc = NULL;
-+ unsigned short space, tx_in;
-+
-+ tx_in = priv->regs->tx_in;
-+
-+ dev->trans_start = jiffies; /* save the timestamp */
-+ space = TX_DMA_RING_MASK - ((TX_DMA_RING_SIZE + tx_in - priv->tx_tail) & TX_DMA_RING_MASK);
-+
-+ if (unlikely(space == 0)) {
-+ if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
-+ spin_lock(&priv->lock);
-+ if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
-+ priv->regs->status |= UBI32_ETH_VP_STATUS_TX_Q_FULL;
-+ priv->vp_stats.tx_q_full_cnt++;
-+ netif_stop_queue(dev);
-+ }
-+ spin_unlock(&priv->lock);
-+ }
-+
-+ /* give both HW and this driver an extra trigger */
-+ priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
-+#ifndef UBICOM32_USE_POLLING
-+ ubicom32_set_interrupt(dev->irq);
-+#endif
-+ ubicom32_set_interrupt(priv->vp_int_bit);
-+
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ /*still have room */
-+ desc = (struct ubi32_eth_dma_desc *)skb->cb;
-+ desc->data_pointer = skb->data;
-+ desc->data_len = skb->len;
-+ priv->regs->tx_dma_ring[tx_in] = desc;
-+ tx_in = ((tx_in + 1) & TX_DMA_RING_MASK);
-+ wmb();
-+ priv->regs->tx_in = tx_in;
-+ /* kick the HRT */
-+ ubicom32_set_interrupt(priv->vp_int_bit);
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+/*
-+ * Deal with a transmit timeout.
-+ */
-+static void ubi32_eth_tx_timeout (struct net_device *dev)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ dev->stats.tx_errors++;
-+ priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
-+#ifndef UBICOM32_USE_POLLING
-+ ubicom32_set_interrupt(dev->irq);
-+#endif
-+ ubicom32_set_interrupt(priv->vp_int_bit);
-+}
-+
-+static int ubi32_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ struct mii_ioctl_data *data = if_mii(rq);
-+
-+ printk(KERN_INFO "ioctl %s, %d\n", dev->name, cmd);
-+ switch (cmd) {
-+ case SIOCGMIIPHY:
-+ data->phy_id = 0;
-+ break;
-+
-+ case SIOCGMIIREG:
-+ if ((data->reg_num & 0x1F) == MII_BMCR) {
-+ /* Make up MII control register value from what we know */
-+ data->val_out = 0x0000
-+ | ((priv->regs->status & UBI32_ETH_VP_STATUS_DUPLEX)
-+ ? BMCR_FULLDPLX : 0)
-+ | ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED100)
-+ ? BMCR_SPEED100 : 0)
-+ | ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED1000)
-+ ? BMCR_SPEED1000 : 0);
-+ } else if ((data->reg_num & 0x1F) == MII_BMSR) {
-+ /* Make up MII status register value from what we know */
-+ data->val_out =
-+ (BMSR_100FULL|BMSR_100HALF|BMSR_10FULL|BMSR_10HALF)
-+ | ((priv->regs->status & UBI32_ETH_VP_STATUS_LINK)
-+ ? BMSR_LSTATUS : 0);
-+ } else {
-+ return -EIO;
-+ }
-+ break;
-+
-+ case SIOCSMIIREG:
-+ return -EOPNOTSUPP;
-+ break;
-+
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * Return statistics to the caller
-+ */
-+static struct net_device_stats *ubi32_eth_get_stats(struct net_device *dev)
-+{
-+ return &dev->stats;
-+}
-+
-+
-+static int ubi32_eth_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ struct ubi32_eth_private *priv = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ if ((new_mtu < 68) || (new_mtu > 1500))
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ dev->mtu = new_mtu;
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+ printk(KERN_INFO "set mtu to %d", new_mtu);
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_eth_cleanup: unload the module
-+ */
-+void ubi32_eth_cleanup(void)
-+{
-+ struct ubi32_eth_private *priv;
-+ struct net_device *dev;
-+ int i;
-+
-+ for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
-+ dev = ubi32_eth_devices[i];
-+ if (dev) {
-+ priv = netdev_priv(dev);
-+ kfree(priv->regs->tx_dma_ring);
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ ubi32_eth_devices[i] = NULL;
-+ }
-+ }
-+}
-+
-+int ubi32_eth_init_module(void)
-+{
-+ struct ethtionode *eth_node;
-+ struct net_device *dev;
-+ struct ubi32_eth_private *priv;
-+ int i, err;
-+
-+ /*
-+ * Device allocation.
-+ */
-+ err = 0;
-+ for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
-+ /*
-+ * See if the eth_vp is in the device tree.
-+ */
-+ eth_node = (struct ethtionode *)devtree_find_node(eth_if_name[i]);
-+ if (!eth_node) {
-+ printk(KERN_INFO "%s does not exist\n", eth_if_name[i]);
-+ continue;
-+ }
-+
-+ eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
-+ sizeof(struct ubi32_eth_dma_desc *) *
-+ (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE),
-+ GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
-+
-+ if (eth_node->tx_dma_ring == NULL) {
-+ eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
-+ sizeof(struct ubi32_eth_dma_desc *) *
-+ (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), GFP_KERNEL);
-+ printk(KERN_INFO "fail to allocate from OCM\n");
-+ }
-+
-+ if (!eth_node->tx_dma_ring) {
-+ err = -ENOMEM;
-+ break;
-+ }
-+ eth_node->rx_dma_ring = eth_node->tx_dma_ring + TX_DMA_RING_SIZE;
-+ eth_node->tx_sz = TX_DMA_RING_SIZE - 1;
-+ eth_node->rx_sz = RX_DMA_RING_SIZE - 1;
-+
-+ dev = alloc_etherdev(sizeof(struct ubi32_eth_private));
-+ if (!dev) {
-+ kfree(eth_node->tx_dma_ring);
-+ err = -ENOMEM;
-+ break;
-+ }
-+ priv = netdev_priv(dev);
-+ priv->dev = dev;
-+
-+ /*
-+ * This just fill in some default Ubicom MAC address
-+ */
-+ memcpy(dev->dev_addr, mac_addr[i], ETH_ALEN);
-+ memset(dev->broadcast, 0xff, ETH_ALEN);
-+
-+ priv->regs = eth_node;
-+ priv->regs->command = 0;
-+ priv->regs->int_mask = 0;
-+ priv->regs->int_status = 0;
-+ priv->regs->tx_out = 0;
-+ priv->regs->rx_out = 0;
-+ priv->regs->tx_in = 0;
-+ priv->regs->rx_in = 0;
-+ priv->rx_tail = 0;
-+ priv->tx_tail = 0;
-+
-+ priv->vp_int_bit = eth_node->dn.sendirq;
-+ dev->irq = eth_node->dn.recvirq;
-+
-+ spin_lock_init(&priv->lock);
-+
-+ dev->open = ubi32_eth_open;
-+ dev->stop = ubi32_eth_close;
-+ dev->hard_start_xmit = ubi32_eth_start_xmit;
-+ dev->tx_timeout = ubi32_eth_tx_timeout;
-+ dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT;
-+
-+ dev->set_config = ubi32_eth_set_config;
-+ dev->do_ioctl = ubi32_eth_ioctl;
-+ dev->get_stats = ubi32_eth_get_stats;
-+ dev->change_mtu = ubi32_eth_change_mtu;
-+#ifdef UBICOM32_USE_NAPI
-+ netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT);
-+#endif
-+ err = register_netdev(dev);
-+ if (err) {
-+ printk(KERN_WARNING "Failed to register netdev %s\n", eth_if_name[i]);
-+ //release_region();
-+ free_netdev(dev);
-+ kfree(eth_node->tx_dma_ring);
-+ break;
-+ }
-+
-+ ubi32_eth_devices[i] = dev;
-+ printk(KERN_INFO "%s vp_base:0x%p, tio_int:%d irq:%d feature:0x%lx\n",
-+ dev->name, priv->regs, eth_node->dn.sendirq, dev->irq, dev->features);
-+ }
-+
-+ if (err) {
-+ ubi32_eth_cleanup();
-+ return err;
-+ }
-+
-+ if (!ubi32_eth_devices[0] && !ubi32_eth_devices[1]) {
-+ return -ENODEV;
-+ }
-+
-+#if defined(UBICOM32_USE_POLLING)
-+ init_timer(ð_poll_timer);
-+ eth_poll_timer.function = ubi32_eth_poll;
-+ eth_poll_timer.data = (unsigned long)0;
-+ eth_poll_timer.expires = jiffies + 2;
-+ add_timer(ð_poll_timer);
-+#endif
-+
-+ return 0;
-+}
-+
-+module_init(ubi32_eth_init_module);
-+module_exit(ubi32_eth_cleanup);
-+
-+MODULE_AUTHOR("Kan Yan, Greg Ren");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/drivers/net/ubi32-eth.h linux-2.6.30.10-ubi/drivers/net/ubi32-eth.h
---- linux-2.6.30.10/drivers/net/ubi32-eth.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/net/ubi32-eth.h 2009-12-11 11:45:18.000000000 +0200
-@@ -0,0 +1,132 @@
-+/*
-+ * drivers/net/ubi32-eth.h
-+ * Ubicom32 ethernet TIO interface driver definitions.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#ifndef _UBI32_ETH_H
-+#define _UBI32_ETH_H
-+
-+#include <asm/devtree.h>
-+
-+#define UBI32_ETH_NUM_OF_DEVICES 2
-+
-+/*
-+ * Number of bytes trashed beyond the packet data.
-+ */
-+#define UBI32_ETH_TRASHED_MEMORY (CACHE_LINE_SIZE + ETH_HLEN - 1)
-+
-+/*
-+ * Linux already reserves NET_SKB_PAD bytes of headroom in each sk_buff.
-+ * We want to be able to reserve at least one cache line to align Ethernet
-+ * and IP header to cache line.
-+ * Note that the TIO expects a CACHE_LINE_SIZE - ETH_HLEN aligned Ethernet
-+ * header, while satisfies NET_IP_ALIGN (= 2) automatically.
-+ * (NET_SKB_PAD is 16, NET_IP_ALIGN is 2, CACHE_LINE_SIZE is 32).
-+ * You can add more space by making UBI32_ETH_RESERVE_EXTRA != 0.
-+ */
-+#define UBI32_ETH_RESERVE_EXTRA (1 * CACHE_LINE_SIZE)
-+#define UBI32_ETH_RESERVE_SPACE (UBI32_ETH_RESERVE_EXTRA + CACHE_LINE_SIZE)
-+
-+struct ubi32_eth_dma_desc {
-+ volatile void *data_pointer; /* pointer to the buffer */
-+ volatile u16 buffer_len; /* the buffer size */
-+ volatile u16 data_len; /* actual frame length */
-+ volatile u32 status; /* bit0: status to be update by VP; bit[31:1] time stamp */
-+};
-+
-+#define TX_DMA_RING_SIZE (1<<8)
-+#define TX_DMA_RING_MASK (TX_DMA_RING_SIZE - 1)
-+#define RX_DMA_RING_SIZE (1<<8)
-+#define RX_DMA_RING_MASK (RX_DMA_RING_SIZE - 1)
-+
-+#define RX_DMA_MAX_QUEUE_SIZE (RX_DMA_RING_SIZE - 1) /* no more than (RX_DMA_RING_SIZE - 1) */
-+#define RX_MAX_PKT_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN)
-+#define RX_MIN_PKT_SIZE ETH_ZLEN
-+#define RX_BUF_SIZE (RX_MAX_PKT_SIZE + VLAN_HLEN) /* allow double VLAN tag */
-+
-+#define UBI32_ETH_VP_TX_TIMEOUT (10*HZ)
-+
-+struct ubi32_eth_vp_stats {
-+ u32 rx_alloc_err;
-+ u32 tx_q_full_cnt;
-+ u32 rx_q_full_cnt;
-+ u32 rx_throttle;
-+};
-+
-+struct ubi32_eth_private {
-+ struct net_device *dev;
-+ struct ubi32_eth_vp_stats vp_stats;
-+ spinlock_t lock;
-+#ifdef UBICOM32_USE_NAPI
-+ struct napi_struct napi;
-+#else
-+ struct tasklet_struct tsk;
-+#endif
-+ struct ethtionode *regs;
-+ u16 rx_tail;
-+ u16 tx_tail;
-+ u32 vp_int_bit;
-+};
-+
-+struct ethtionode {
-+ struct devtree_node dn;
-+ volatile u16 command;
-+ volatile u16 status;
-+ volatile u16 int_mask; /* interrupt mask */
-+ volatile u16 int_status; /* interrupt mask */
-+ volatile u16 tx_in; /* owned by driver */
-+ volatile u16 tx_out; /* owned by vp */
-+ volatile u16 rx_in; /* owned by driver */
-+ volatile u16 rx_out; /* owned by vp */
-+ u16 tx_sz; /* owned by driver */
-+ u16 rx_sz; /* owned by driver */
-+ struct ubi32_eth_dma_desc **tx_dma_ring;
-+ struct ubi32_eth_dma_desc **rx_dma_ring;
-+};
-+
-+#define UBI32_ETH_VP_STATUS_LINK (1<<0)
-+#define UBI32_ETH_VP_STATUS_SPEED100 (0x1<<1)
-+#define UBI32_ETH_VP_STATUS_SPEED1000 (0x1<<2)
-+#define UBI32_ETH_VP_STATUS_DUPLEX (0x1<<3)
-+#define UBI32_ETH_VP_STATUS_FLOW_CTRL (0x1<<4)
-+
-+#define UBI32_ETH_VP_STATUS_RX_STATE (0x1<<5)
-+#define UBI32_ETH_VP_STATUS_TX_STATE (0x1<<6)
-+
-+#define UBI32_ETH_VP_STATUS_TX_Q_FULL (1<<8)
-+
-+#define UBI32_ETH_VP_INT_RX (1<<0)
-+#define UBI32_ETH_VP_INT_TX (1<<1)
-+
-+#define UBI32_ETH_VP_CMD_RX_ENABLE (1<<0)
-+#define UBI32_ETH_VP_CMD_TX_ENABLE (1<<1)
-+
-+#define UBI32_ETH_VP_RX_OK (1<<0)
-+#define UBI32_ETH_VP_TX_OK (1<<1)
-+
-+#define UBI32_TX_BOUND TX_DMA_RING_SIZE
-+#define UBI32_RX_BOUND 64
-+#define UBI32_ETH_NAPI_WEIGHT 64 /* for GigE */
-+#endif
-diff -ruN linux-2.6.30.10/drivers/net/usb/asix.c linux-2.6.30.10-ubi/drivers/net/usb/asix.c
---- linux-2.6.30.10/drivers/net/usb/asix.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/net/usb/asix.c 2009-12-11 11:45:18.000000000 +0200
-@@ -319,14 +319,33 @@
- /* get the packet length */
- size = (u16) (header & 0x0000ffff);
-
-- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
-+ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
-+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
-+ if (((u32)packet & 0x02) == 0) {
-+ memmove(packet - 2, packet, size);
-+ skb->data -= 2;
-+ skb->tail -= 2;
-+ }
-+#endif
- return 2;
-+ }
-+
- if (size > ETH_FRAME_LEN) {
- deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
- return 0;
- }
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (ax_skb) {
-+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
-+ if (((u32)packet & 0x02) == 0) {
-+ memmove(packet - 2, packet, size);
-+ ax_skb->data = packet - 2;
-+ } else {
-+ ax_skb->data = packet;
-+ }
-+#else
-+ ax_skb->data = packet;
-+#endif
- ax_skb->len = size;
- ax_skb->data = packet;
- skb_set_tail_pointer(ax_skb, size);
-@@ -1125,13 +1144,19 @@
- mode = AX88178_MEDIUM_DEFAULT;
-
- if (ecmd.speed == SPEED_1000)
-+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
- mode |= AX_MEDIUM_GM;
-+#else
-+ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
-+#endif
- else if (ecmd.speed == SPEED_100)
- mode |= AX_MEDIUM_PS;
- else
- mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
-
-+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
- mode |= AX_MEDIUM_ENCK;
-+#endif
-
- if (ecmd.duplex == DUPLEX_FULL)
- mode |= AX_MEDIUM_FD;
-diff -ruN linux-2.6.30.10/drivers/oprofile/cpu_buffer.c linux-2.6.30.10-ubi/drivers/oprofile/cpu_buffer.c
---- linux-2.6.30.10/drivers/oprofile/cpu_buffer.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/oprofile/cpu_buffer.c 2009-12-11 11:45:18.000000000 +0200
-@@ -328,10 +328,10 @@
- }
-
- static inline void
--__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-- unsigned long event, int is_kernel)
-+__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
-+ unsigned long event, int is_kernel, int cpu)
- {
-- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
-+ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
- unsigned long backtrace = oprofile_backtrace_depth;
-
- /*
-@@ -353,7 +353,8 @@
- void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel)
- {
-- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
-+ __oprofile_add_ext_sample_cpu(pc, regs, event,
-+ is_kernel, smp_processor_id());
- }
-
- void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
-@@ -361,7 +362,8 @@
- int is_kernel = !user_mode(regs);
- unsigned long pc = profile_pc(regs);
-
-- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
-+ __oprofile_add_ext_sample_cpu(pc, regs, event,
-+ is_kernel, smp_processor_id());
- }
-
- /*
-diff -ruN linux-2.6.30.10/drivers/pci/Makefile linux-2.6.30.10-ubi/drivers/pci/Makefile
---- linux-2.6.30.10/drivers/pci/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/pci/Makefile 2009-12-11 11:45:18.000000000 +0200
-@@ -44,8 +44,8 @@
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
- obj-$(CONFIG_MN10300) += setup-bus.o
-+obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
-
--#
- # ACPI Related PCI FW Functions
- #
- obj-$(CONFIG_ACPI) += pci-acpi.o
-diff -ruN linux-2.6.30.10/drivers/serial/Kconfig linux-2.6.30.10-ubi/drivers/serial/Kconfig
---- linux-2.6.30.10/drivers/serial/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/serial/Kconfig 2009-12-11 11:45:19.000000000 +0200
-@@ -871,6 +871,57 @@
- console (the system console is the device which receives all kernel
- messages and warnings and which allows logins in single user mode).
-
-+config SERIAL_UBI32_UARTTIO
-+ tristate "Ubicom UARTTIO support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default y
-+ help
-+ Add support for the Ubicom virtual peripherial serial interface.
-+
-+config SERIAL_UBI32_UARTTIO_NR_UARTS
-+ int "Maximum number of UARTTIO virtual serial ports"
-+ depends on SERIAL_UBI32_UARTTIO
-+ default "4"
-+ help
-+ Set this to the maximum number of serial ports you want the driver to support.
-+
-+config SERIAL_UBI32_UARTTIO_CONSOLE
-+ tristate "Ubicom UARTTIO console support"
-+ depends on SERIAL_UBI32_UARTTIO=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+ help
-+ Add support for console on the Ubicom virtual peripherial serial interface.
-+
-+config SERIAL_UBI32_SERDES
-+ bool "Ubicom serial port support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default y
-+ help
-+ Add support for the Ubicom serial interface.
-+
-+config SERIAL_UBI32_SERDES_CONSOLE
-+ bool "Ubicom serial console support"
-+ depends on SERIAL_UBI32_SERDES=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+
-+config SERIAL_UBI32_MAILBOX
-+ bool "Ubicom mailbox support"
-+ depends on UBICOM32=y
-+ select SERIAL_CORE
-+ default n
-+ help
-+ Add support for the Ubicom mailbox interface.
-+
-+config SERIAL_UBI32_MAILBOX_CONSOLE
-+ bool "Ubicom mailbox console support"
-+ depends on SERIAL_UBI32_MAILBOX=y
-+ select SERIAL_CORE_CONSOLE
-+ default y
-+
- config SERIAL_SUNCORE
- bool
- depends on SPARC
-diff -ruN linux-2.6.30.10/drivers/serial/Makefile linux-2.6.30.10-ubi/drivers/serial/Makefile
---- linux-2.6.30.10/drivers/serial/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/serial/Makefile 2009-12-11 11:45:19.000000000 +0200
-@@ -77,3 +77,6 @@
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
-+obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
-+obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
-diff -ruN linux-2.6.30.10/drivers/serial/ubi32_mailbox.c linux-2.6.30.10-ubi/drivers/serial/ubi32_mailbox.c
---- linux-2.6.30.10/drivers/serial/ubi32_mailbox.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/serial/ubi32_mailbox.c 2009-12-11 11:45:19.000000000 +0200
-@@ -0,0 +1,928 @@
-+/*
-+ * drivers/serial/ubi32_mailbox.c
-+ * Ubicom32 On-Chip Mailbox Driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+#include <linux/platform_device.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/ip5000.h>
-+
-+#define SERIAL_UBICOM_BAUDRATE 115200
-+#define SERIAL_UBICOM_DATA_BIT 8 /* Fixed parameter - do not change */
-+#define SERIAL_UBICOM_PAR_BIT 0 /* Fixed parameter - do not change */
-+#define SERIAL_UBICOM_STOP_BIT 1 /* Fixed parameter - do not change */
-+
-+/* UART name and device definitions */
-+#define UBI32_MAILBOX_NAME "ttyUM" // XXX
-+#define UBI32_MAILBOX_MAJOR 207 // XXX
-+#define UBI32_MAILBOX_MINOR 64
-+
-+#define PORT_UBI32_MAILBOX 1235
-+#define NR_PORTS 1
-+
-+#define get_sclk() 0
-+
-+struct ubi32_mailbox_port {
-+ struct uart_port port;
-+ /*
-+ * NOTE (rkeller):
-+ * the uart port is wrapped in another structure in case we need to hold more state than
-+ * what we can hold in the uart_port.
-+ * Not sure if we need this, I took over the concept from the blackfin driver.
-+ */
-+} ubi32_mailbox_ports[NR_PORTS];
-+
-+struct ubi32_mailbox_resource {
-+ int uart_base_addr;
-+ int uart_irq;
-+} ubi32_mailbox_resource[NR_PORTS] = {
-+ /*
-+ * uart_base_addr has to be non-NULL because it is put in the uart_port membase.
-+ * If membase if null the kernel skips the configuration and our port_type never gets set.
-+ */
-+ {ISD_MAILBOX_BASE, ISD_MAILBOX_INT}
-+};
-+
-+static volatile struct ubicom32_isd_mailbox {
-+ volatile u32_t in;
-+ volatile u32_t out;
-+ volatile u32_t status;
-+} *ubi32_mailbox = (struct ubicom32_isd_mailbox *)ISD_MAILBOX_BASE;
-+
-+static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart);
-+
-+static void ubi32_mailbox_mctrl_check(struct ubi32_mailbox_port *uart);
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+static int mailbox_console_flg = TRUE;
-+static int num_timeouts = 0;
-+
-+/*
-+ * dummy functions and defined to be able to compile the Blackfin code
-+ */
-+#define UART_GET_LSR(port) (1)
-+#define UART_PUT_LSR(port, bits)
-+#define UART_CLEAR_LSR(port) (1)
-+#define TEMT 1
-+#define TFI 1
-+#define BI 1
-+#define PE 1
-+#define OE 1
-+#define FE 1
-+#define THRE 1
-+#define DR 1
-+#define UART_GET_LCR(port) (1)
-+#define UART_PUT_LCR(port, bits)
-+#define SB 1
-+#define STB 1
-+#define PEN 1
-+#define EPS 1
-+#define STP 1
-+#define WLS(n) 0
-+#define UART_GET_IER(port) (1)
-+#define UART_SET_IER(port, bits)
-+#define UART_CLEAR_IER(port, bits)
-+#define ETBEI 0
-+#define ERBFI 0
-+#define UART_GET_CHAR(port) ubi32_mailbox_get_char()
-+#define UART_PUT_CHAR(port, ch) ubi32_mailbox_put_char(ch)
-+#define SSYNC()
-+#define UART_GET_DLL(port) 0
-+#define UART_PUT_DLL(port, ch)
-+#define UART_GET_DLH(port) 0
-+#define UART_PUT_DLH(port, ch)
-+#define UART_GET_GCTL(port) (0)
-+#define UART_PUT_GCTL(port, ch)
-+#define UCEN 1
-+
-+/*
-+ * ubi32_mailbox_get_char_avail()
-+ */
-+static int ubi32_mailbox_get_char_avail(void)
-+{
-+ return !(ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY);
-+}
-+
-+/*
-+ * ubi32_mailbox_get_char()
-+ */
-+static u32_t ubi32_mailbox_get_char(void)
-+{
-+ if (mailbox_console_flg == TRUE) {
-+ /*
-+ * Mailbox console is connected.
-+ */
-+ while (ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY);
-+ return ubi32_mailbox->in & 0xff;
-+ }
-+
-+ /*
-+ * Mailbox console was not connected.
-+ */
-+ if (ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY) {
-+ return 0xff;
-+ }
-+
-+ /*
-+ * Mailbox console is connecting.
-+ */
-+ mailbox_console_flg = TRUE;
-+ num_timeouts = 0;
-+ return ubi32_mailbox->in & 0xff;
-+}
-+
-+#define MAILBOX_MAX_ATTEMPTS 1000000
-+#define MAILBOX_MAX_TIMEOUTS 5
-+/*
-+ * ubi32_mailbox_put_char()
-+ */
-+static void ubi32_mailbox_put_char(u32_t v)
-+{
-+ /*
-+ * Wait to be able to output.
-+ */
-+ u32_t num_attempts = 0;
-+
-+ if(mailbox_console_flg == TRUE) {
-+ while(num_attempts++ < MAILBOX_MAX_ATTEMPTS) {
-+ if(ubi32_mailbox->status & ISD_MAILBOX_STATUS_OUT_EMPTY) {
-+ break;
-+ }
-+ }
-+
-+ /*
-+ * If timed out more than 5 times on send, mailbox console is disconnected now.
-+ */
-+ if (num_attempts > MAILBOX_MAX_ATTEMPTS) {
-+ if (num_timeouts++ > MAILBOX_MAX_TIMEOUTS) {
-+ mailbox_console_flg = FALSE;
-+ }
-+ }
-+ }
-+
-+ asm volatile(
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ "pipe_flush 0 \n\t"
-+ );
-+
-+ ubi32_mailbox->out = v & 0xff;
-+}
-+
-+static void ubi32_mailbox_hw_init(struct ubi32_mailbox_port *uart)
-+{
-+// NOTE: It does not do any good to do these here because we are running on the linux hardware thread,
-+// and these have to be called on the ldsr thread.
-+// ubicom32_clear_interrupt(ISD_MAILBOX_INT);
-+// ubicom32_enable_interrupt(ISD_MAILBOX_INT);
-+}
-+
-+/*
-+ * interrupts are disabled on entry
-+ */
-+static void ubi32_mailbox_stop_tx(struct uart_port *port)
-+{
-+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+// struct circ_buf *xmit = &uart->port.info->xmit;
-+
-+ while (!(UART_GET_LSR(uart) & TEMT))
-+ cpu_relax();
-+
-+ /* Clear TFI bit */
-+ UART_PUT_LSR(uart, TFI);
-+ UART_CLEAR_IER(uart, ETBEI);
-+}
-+
-+/*
-+ * port is locked and interrupts are disabled
-+ */
-+static void ubi32_mailbox_start_tx(struct uart_port *port)
-+{
-+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+
-+ UART_SET_IER(uart, ETBEI);
-+
-+ ubi32_mailbox_tx_chars(uart);
-+}
-+
-+/*
-+ * Interrupts are enabled
-+ */
-+static void ubi32_mailbox_stop_rx(struct uart_port *port)
-+{
-+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+ UART_CLEAR_IER(uart, ERBFI);
-+}
-+
-+/*
-+ * Set the modem control timer to fire immediately.
-+ */
-+static void ubi32_mailbox_enable_ms(struct uart_port *port)
-+{
-+}
-+
-+static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
-+{
-+ struct uart_info *info = uart->port.info;
-+ struct tty_struct *tty = info->port.tty;
-+ unsigned int status, ch, flg;
-+
-+ status = 0; // XXX? UART_GET_LSR(uart);
-+ UART_CLEAR_LSR(uart);
-+
-+ ch = UART_GET_CHAR(uart);
-+
-+ if(ch == 0xff)
-+ return;
-+
-+ uart->port.icount.rx++;
-+
-+ if (status & BI) {
-+ uart->port.icount.brk++;
-+ if (uart_handle_break(&uart->port))
-+ goto ignore_char;
-+ status &= ~(PE | FE);
-+ }
-+ if (status & PE)
-+ uart->port.icount.parity++;
-+ if (status & OE)
-+ uart->port.icount.overrun++;
-+ if (status & FE)
-+ uart->port.icount.frame++;
-+
-+ status &= uart->port.read_status_mask;
-+
-+ if (status & BI)
-+ flg = TTY_BREAK;
-+ else if (status & PE)
-+ flg = TTY_PARITY;
-+ else if (status & FE)
-+ flg = TTY_FRAME;
-+ else
-+ flg = TTY_NORMAL;
-+
-+ if (uart_handle_sysrq_char(&uart->port, ch))
-+ goto ignore_char;
-+
-+ uart_insert_char(&uart->port, status, OE, ch, flg);
-+
-+ ignore_char:
-+ tty_flip_buffer_push(tty);
-+}
-+
-+static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart)
-+{
-+ struct circ_buf *xmit = &uart->port.info->xmit;
-+
-+ if (uart->port.x_char) {
-+ UART_PUT_CHAR(uart, uart->port.x_char);
-+ uart->port.icount.tx++;
-+ uart->port.x_char = 0;
-+ }
-+ /*
-+ * Check the modem control lines before
-+ * transmitting anything.
-+ */
-+ ubi32_mailbox_mctrl_check(uart);
-+
-+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-+ ubi32_mailbox_stop_tx(&uart->port);
-+ return;
-+ }
-+
-+ while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
-+ UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+ uart->port.icount.tx++;
-+ SSYNC();
-+ }
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(&uart->port);
-+
-+ if (uart_circ_empty(xmit))
-+ ubi32_mailbox_stop_tx(&uart->port);
-+}
-+
-+static irqreturn_t ubi32_mailbox_isr(int irq, void *dev_id)
-+{
-+ struct ubi32_mailbox_port *uart = dev_id;
-+
-+ spin_lock(&uart->port.lock);
-+
-+ //XXX?while (UART_GET_LSR(uart) & DR)
-+
-+ /*
-+ * RX process
-+ */
-+ while (ubi32_mailbox_get_char_avail()) {
-+ ubi32_mailbox_rx_chars(uart);
-+ }
-+
-+#if 0
-+ /*
-+ * TX process
-+ */
-+ if (this_uart.tx_in == this_uart.tx_out) {
-+ UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_mask &= ~IO_PORTX_INT_SERDES_TXBE;
-+ } else if (UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_status & IO_PORTX_INT_SERDES_TXBE) {
-+ uart_ubicom32_send(this_uart.tx_buf[this_uart.tx_out & (SERIAL_UBICOM_BUF_SIZE - 1)]);
-+ this_uart.tx_out++;
-+ UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_mask |= IO_PORTX_INT_SERDES_TXBE;
-+ }
-+#endif
-+
-+ spin_unlock(&uart->port.lock);
-+
-+ return IRQ_HANDLED;
-+}
-+#if 0
-+static irqreturn_t ubi32_mailbox_tx_int(int irq, void *dev_id)
-+{
-+ struct ubi32_mailbox_port *uart = dev_id;
-+
-+ spin_lock(&uart->port.lock);
-+ if (UART_GET_LSR(uart) & THRE)
-+ ubi32_mailbox_tx_chars(uart);
-+ spin_unlock(&uart->port.lock);
-+
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+/*
-+ * Return TIOCSER_TEMT when transmitter is not busy.
-+ */
-+static unsigned int ubi32_mailbox_tx_empty(struct uart_port *port)
-+{
-+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+ unsigned short lsr;
-+
-+ lsr = UART_GET_LSR(uart);
-+ if (lsr & TEMT)
-+ return TIOCSER_TEMT;
-+ else
-+ return 0;
-+}
-+
-+static unsigned int ubi32_mailbox_get_mctrl(struct uart_port *port)
-+{
-+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-+}
-+
-+static void ubi32_mailbox_set_mctrl(struct uart_port *port, unsigned int mctrl)
-+{
-+}
-+
-+/*
-+ * Handle any change of modem status signal since we were last called.
-+ */
-+static void ubi32_mailbox_mctrl_check(struct ubi32_mailbox_port *uart)
-+{
-+}
-+
-+/*
-+ * Interrupts are always disabled.
-+ */
-+static void ubi32_mailbox_break_ctl(struct uart_port *port, int break_state)
-+{
-+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+ u16 lcr = UART_GET_LCR(uart);
-+ if (break_state)
-+ lcr |= SB;
-+ else
-+ lcr &= ~SB;
-+ UART_PUT_LCR(uart, lcr);
-+ SSYNC();
-+}
-+
-+static int ubi32_mailbox_startup(struct uart_port *port)
-+{
-+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+
-+ if (request_irq(uart->port.irq, ubi32_mailbox_isr, IRQF_DISABLED,
-+ "UBI32_MAILBOX", uart)) {
-+ printk(KERN_NOTICE "Unable to attach Ubicom32 SERDES interrupt\n");
-+ return -EBUSY;
-+ }
-+
-+ UART_SET_IER(uart, ERBFI);
-+ return 0;
-+}
-+
-+static void ubi32_mailbox_shutdown(struct uart_port *port)
-+{
-+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+
-+ free_irq(uart->port.irq, uart);
-+}
-+
-+static void
-+ubi32_mailbox_set_termios(struct uart_port *port, struct ktermios *termios,
-+ struct ktermios *old)
-+{
-+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+ unsigned long flags;
-+ unsigned int baud, quot;
-+ unsigned short val, ier, lsr, lcr = 0;
-+
-+ switch (termios->c_cflag & CSIZE) {
-+ case CS8:
-+ lcr = WLS(8);
-+ break;
-+ case CS7:
-+ lcr = WLS(7);
-+ break;
-+ case CS6:
-+ lcr = WLS(6);
-+ break;
-+ case CS5:
-+ lcr = WLS(5);
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: word lengh not supported\n",
-+ __FUNCTION__);
-+ }
-+
-+ if (termios->c_cflag & CSTOPB)
-+ lcr |= STB;
-+ if (termios->c_cflag & PARENB)
-+ lcr |= PEN;
-+ if (!(termios->c_cflag & PARODD))
-+ lcr |= EPS;
-+ if (termios->c_cflag & CMSPAR)
-+ lcr |= STP;
-+
-+ port->read_status_mask = OE;
-+ if (termios->c_iflag & INPCK)
-+ port->read_status_mask |= (FE | PE);
-+ if (termios->c_iflag & (BRKINT | PARMRK))
-+ port->read_status_mask |= BI;
-+
-+ /*
-+ * Characters to ignore
-+ */
-+ port->ignore_status_mask = 0;
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= FE | PE;
-+ if (termios->c_iflag & IGNBRK) {
-+ port->ignore_status_mask |= BI;
-+ /*
-+ * If we're ignoring parity and break indicators,
-+ * ignore overruns too (for real raw support).
-+ */
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= OE;
-+ }
-+
-+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+ quot = uart_get_divisor(port, baud);
-+ spin_lock_irqsave(&uart->port.lock, flags);
-+
-+ do {
-+ lsr = UART_GET_LSR(uart);
-+ } while (!(lsr & TEMT));
-+
-+ /* Disable UART */
-+ ier = UART_GET_IER(uart);
-+ UART_CLEAR_IER(uart, 0xF);
-+
-+ UART_PUT_DLL(uart, quot & 0xFF);
-+ SSYNC();
-+ UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
-+ SSYNC();
-+
-+ UART_PUT_LCR(uart, lcr);
-+
-+ /* Enable UART */
-+ UART_SET_IER(uart, ier);
-+
-+ val = UART_GET_GCTL(uart);
-+ val |= UCEN;
-+ UART_PUT_GCTL(uart, val);
-+
-+ spin_unlock_irqrestore(&uart->port.lock, flags);
-+}
-+
-+static const char *ubi32_mailbox_type(struct uart_port *port)
-+{
-+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+
-+ return uart->port.type == PORT_UBI32_MAILBOX ? "UBI32_MAILBOX" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'.
-+ */
-+static void ubi32_mailbox_release_port(struct uart_port *port)
-+{
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'.
-+ */
-+static int ubi32_mailbox_request_port(struct uart_port *port)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void ubi32_mailbox_config_port(struct uart_port *port, int flags)
-+{
-+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+
-+ if (flags & UART_CONFIG_TYPE && ubi32_mailbox_request_port(&uart->port) == 0)
-+ uart->port.type = PORT_UBI32_MAILBOX;
-+}
-+
-+/*
-+ * Verify the new serial_struct (for TIOCSSERIAL).
-+ * The only change we allow are to the flags and type, and
-+ * even then only between PORT_UBI32_MAILBOX and PORT_UNKNOWN
-+ */
-+static int
-+ubi32_mailbox_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ return 0;
-+}
-+
-+static struct uart_ops ubi32_mailbox_pops = {
-+ .tx_empty = ubi32_mailbox_tx_empty,
-+ .set_mctrl = ubi32_mailbox_set_mctrl,
-+ .get_mctrl = ubi32_mailbox_get_mctrl,
-+ .stop_tx = ubi32_mailbox_stop_tx,
-+ .start_tx = ubi32_mailbox_start_tx,
-+ .stop_rx = ubi32_mailbox_stop_rx,
-+ .enable_ms = ubi32_mailbox_enable_ms,
-+ .break_ctl = ubi32_mailbox_break_ctl,
-+ .startup = ubi32_mailbox_startup,
-+ .shutdown = ubi32_mailbox_shutdown,
-+ .set_termios = ubi32_mailbox_set_termios,
-+ .type = ubi32_mailbox_type,
-+ .release_port = ubi32_mailbox_release_port,
-+ .request_port = ubi32_mailbox_request_port,
-+ .config_port = ubi32_mailbox_config_port,
-+ .verify_port = ubi32_mailbox_verify_port,
-+};
-+
-+static void __init ubi32_mailbox_init_ports(void)
-+{
-+ static int first = 1;
-+ int i;
-+
-+ if (!first)
-+ return;
-+ first = 0;
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ ubi32_mailbox_ports[i].port.uartclk = get_sclk();
-+ ubi32_mailbox_ports[i].port.ops = &ubi32_mailbox_pops;
-+ ubi32_mailbox_ports[i].port.line = i;
-+ ubi32_mailbox_ports[i].port.iotype = UPIO_MEM;
-+ ubi32_mailbox_ports[i].port.membase =
-+ (void __iomem *)ubi32_mailbox_resource[i].uart_base_addr;
-+ ubi32_mailbox_ports[i].port.mapbase =
-+ ubi32_mailbox_resource[i].uart_base_addr;
-+ ubi32_mailbox_ports[i].port.irq =
-+ ubi32_mailbox_resource[i].uart_irq;
-+ ubi32_mailbox_ports[i].port.flags = UPF_BOOT_AUTOCONF;
-+ spin_lock_init(&ubi32_mailbox_ports[i].port.lock);
-+
-+ ubi32_mailbox_hw_init(&ubi32_mailbox_ports[i]);
-+ }
-+
-+}
-+
-+#ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
-+/*
-+ * If the port was already initialised (eg, by a boot loader),
-+ * try to determine the current setup.
-+ */
-+static void __init
-+ubi32_mailbox_console_get_options(struct ubi32_mailbox_port *uart, int *baud,
-+ int *parity, int *bits)
-+{
-+ unsigned short status;
-+
-+ status = UART_GET_IER(uart) & (ERBFI | ETBEI);
-+ if (status == (ERBFI | ETBEI)) {
-+ /* ok, the port was enabled */
-+ unsigned short lcr;
-+ unsigned short dlh, dll;
-+
-+ lcr = UART_GET_LCR(uart);
-+
-+ *parity = 'n';
-+ if (lcr & PEN) {
-+ if (lcr & EPS)
-+ *parity = 'e';
-+ else
-+ *parity = 'o';
-+ }
-+ switch (lcr & 0x03) {
-+ case 0: *bits = 5; break;
-+ case 1: *bits = 6; break;
-+ case 2: *bits = 7; break;
-+ case 3: *bits = 8; break;
-+ }
-+
-+ dll = UART_GET_DLL(uart);
-+ dlh = UART_GET_DLH(uart);
-+
-+ *baud = get_sclk() / (16*(dll | dlh << 8));
-+ }
-+ pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
-+}
-+#endif
-+
-+#if defined(CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-+static struct uart_driver ubi32_mailbox_reg;
-+
-+static int __init
-+ubi32_mailbox_console_setup(struct console *co, char *options)
-+{
-+ struct ubi32_mailbox_port *uart;
-+# ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
-+ int baud = SERIAL_UBICOM_BAUDRATE;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow = 'n';
-+# endif
-+
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ if (co->index == -1 || co->index >= NR_PORTS)
-+ co->index = 0;
-+ uart = &ubi32_mailbox_ports[co->index];
-+
-+# ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
-+ if (options)
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ else
-+ ubi32_mailbox_console_get_options(uart, &baud, &parity, &bits);
-+
-+ //JB return uart_set_options(&uart->port, co, baud, parity, bits, flow);
-+ return 0;
-+# else
-+ return 0;
-+# endif
-+}
-+#endif /* defined (CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE) ||
-+ defined (CONFIG_EARLY_PRINTK) */
-+
-+#ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
-+static void ubi32_mailbox_console_putchar(struct uart_port *port, int ch)
-+{
-+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
-+ while (!(UART_GET_LSR(uart) & THRE))
-+ barrier();
-+ UART_PUT_CHAR(uart, ch);
-+ SSYNC();
-+}
-+
-+/*
-+ * Interrupts are disabled on entering
-+ */
-+static void
-+ubi32_mailbox_console_write(struct console *co, const char *s, unsigned int count)
-+{
-+ struct ubi32_mailbox_port *uart = &ubi32_mailbox_ports[co->index];
-+ unsigned long flags = 0;
-+
-+ spin_lock_irqsave(&uart->port.lock, flags);
-+ uart_console_write(&uart->port, s, count, ubi32_mailbox_console_putchar);
-+ spin_unlock_irqrestore(&uart->port.lock, flags);
-+
-+}
-+
-+static struct console ubi32_mailbox_console = {
-+ .name = UBI32_MAILBOX_NAME,
-+ .write = ubi32_mailbox_console_write,
-+ .device = uart_console_device,
-+ .setup = ubi32_mailbox_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &ubi32_mailbox_reg,
-+};
-+
-+static int __init ubi32_mailbox_console_init(void)
-+{
-+ ubi32_mailbox_init_ports();
-+ register_console(&ubi32_mailbox_console);
-+ return 0;
-+}
-+console_initcall(ubi32_mailbox_console_init);
-+
-+#define UBI32_MAILBOX_CONSOLE &ubi32_mailbox_console
-+#else
-+#define UBI32_MAILBOX_CONSOLE NULL
-+#endif /* CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE */
-+
-+
-+#ifdef CONFIG_EARLY_PRINTK
-+static __init void ubi32_mailbox_early_putc(struct uart_port *port, int ch)
-+{
-+ UART_PUT_CHAR(uart, ch);
-+}
-+
-+static __init void ubi32_mailbox_early_write(struct console *con, const char *s,
-+ unsigned int n)
-+{
-+ struct ubi32_mailbox_port *uart = &ubi32_mailbox_ports[con->index];
-+ unsigned int i;
-+
-+ for (i = 0; i < n; i++, s++) {
-+ if (*s == '\n')
-+ ubi32_mailbox_early_putc(&uart->port, '\r');
-+ ubi32_mailbox_early_putc(&uart->port, *s);
-+ }
-+}
-+
-+static struct __init console ubi32_mailbox_early_console = {
-+ .name = "early_UM",
-+ .write = ubi32_mailbox_early_write,
-+ .device = uart_console_device,
-+ .flags = CON_PRINTBUFFER,
-+ .setup = ubi32_mailbox_console_setup,
-+ .index = -1,
-+ .data = &ubi32_mailbox_reg,
-+};
-+
-+/*
-+ * XXX Unused in our driver. Need to find out what the termios initialization is good/needed for.
-+ */
-+struct console __init *ubi32_mailbox_early_init(unsigned int port,
-+ unsigned int cflag)
-+{
-+ struct ubi32_mailbox_port *uart;
-+ struct ktermios t;
-+
-+ if (port == -1 || port >= NR_PORTS)
-+ port = 0;
-+ ubi32_mailbox_init_ports();
-+ ubi32_mailbox_early_console.index = port;
-+ uart = &ubi32_mailbox_ports[port];
-+ t.c_cflag = cflag;
-+ t.c_iflag = 0;
-+ t.c_oflag = 0;
-+ t.c_lflag = ICANON;
-+ t.c_line = port;
-+ ubi32_mailbox_set_termios(&uart->port, &t, &t);
-+ return &ubi32_mailbox_early_console;
-+}
-+
-+#endif /* CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE */
-+
-+static struct uart_driver ubi32_mailbox_reg = {
-+ .owner = THIS_MODULE,
-+ .driver_name = "ubi32_mailbox",
-+ .dev_name = UBI32_MAILBOX_NAME,
-+ .major = UBI32_MAILBOX_MAJOR,
-+ .minor = UBI32_MAILBOX_MINOR,
-+ .nr = NR_PORTS,
-+ .cons = UBI32_MAILBOX_CONSOLE,
-+};
-+
-+static int ubi32_mailbox_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct ubi32_mailbox_port *uart = platform_get_drvdata(dev);
-+
-+ if (uart)
-+ uart_suspend_port(&ubi32_mailbox_reg, &uart->port);
-+
-+ return 0;
-+}
-+
-+static int ubi32_mailbox_resume(struct platform_device *dev)
-+{
-+ struct ubi32_mailbox_port *uart = platform_get_drvdata(dev);
-+
-+ if (uart)
-+ uart_resume_port(&ubi32_mailbox_reg, &uart->port);
-+
-+ return 0;
-+}
-+
-+static int ubi32_mailbox_probe(struct platform_device *dev)
-+{
-+ struct resource *res = dev->resource;
-+ int i;
-+
-+ for (i = 0; i < dev->num_resources; i++, res++)
-+ if (res->flags & IORESOURCE_MEM)
-+ break;
-+
-+ if (i < dev->num_resources) {
-+ for (i = 0; i < NR_PORTS; i++, res++) {
-+ if (ubi32_mailbox_ports[i].port.mapbase != res->start)
-+ continue;
-+ ubi32_mailbox_ports[i].port.dev = &dev->dev;
-+ uart_add_one_port(&ubi32_mailbox_reg, &ubi32_mailbox_ports[i].port);
-+ platform_set_drvdata(dev, &ubi32_mailbox_ports[i]);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int ubi32_mailbox_remove(struct platform_device *pdev)
-+{
-+ struct ubi32_mailbox_port *uart = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (uart)
-+ uart_remove_one_port(&ubi32_mailbox_reg, &uart->port);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubi32_mailbox_driver = {
-+ .probe = ubi32_mailbox_probe,
-+ .remove = ubi32_mailbox_remove,
-+ .suspend = ubi32_mailbox_suspend,
-+ .resume = ubi32_mailbox_resume,
-+ .driver = {
-+ .name = "ubi32-mbox",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ubi32_mailbox_init(void)
-+{
-+ int ret;
-+
-+ pr_info("Serial: Ubicom32 mailbox serial driver.\n");
-+
-+ mailbox_console_flg = TRUE;
-+ num_timeouts = 0;
-+ ubi32_mailbox_init_ports();
-+
-+ ret = uart_register_driver(&ubi32_mailbox_reg);
-+ if (ret == 0) {
-+ ret = platform_driver_register(&ubi32_mailbox_driver);
-+ if (ret) {
-+ pr_debug("uart register failed\n");
-+ uart_unregister_driver(&ubi32_mailbox_reg);
-+ }
-+ }
-+
-+ /*
-+ * XXX HACK: currently probe does not get called, but the port needs to be added to work.
-+ */
-+ uart_add_one_port(&ubi32_mailbox_reg, &ubi32_mailbox_ports[0].port);
-+ return ret;
-+}
-+
-+static void __exit ubi32_mailbox_exit(void)
-+{
-+ platform_driver_unregister(&ubi32_mailbox_driver);
-+ uart_unregister_driver(&ubi32_mailbox_reg);
-+}
-+
-+module_init(ubi32_mailbox_init);
-+module_exit(ubi32_mailbox_exit);
-+
-+MODULE_ALIAS_CHARDEV_MAJOR(UBI32_MAILBOX_MAJOR);
-+MODULE_ALIAS("platform:ubi32_mailbox");
-diff -ruN linux-2.6.30.10/drivers/serial/ubi32_serdes.c linux-2.6.30.10-ubi/drivers/serial/ubi32_serdes.c
---- linux-2.6.30.10/drivers/serial/ubi32_serdes.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/serial/ubi32_serdes.c 2009-12-11 11:45:19.000000000 +0200
-@@ -0,0 +1,817 @@
-+/*
-+ * drivers/serial/ubi32_serdes.c
-+ * Ubicom32 On-Chip Serial Driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+#include <linux/platform_device.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/ip5000.h>
-+#include <asm/ubicom32suart.h>
-+
-+
-+#define SERIAL_UBICOM_PIN_RXD (1 << 0)
-+#define SERIAL_UBICOM_PIN_TXD (1 << 6)
-+#define SERIAL_UBICOM_CTL0 0x8b300000
-+#define SERIAL_UBICOM_CTL1 0x00000009
-+
-+#define SERIAL_UBICOM_DATA_BIT 8 /* Fixed parameter - do not change */
-+#define SERIAL_UBICOM_PAR_BIT 0 /* Fixed parameter - do not change */
-+#define SERIAL_UBICOM_STOP_BIT 1 /* Fixed parameter - do not change */
-+
-+/* UART name and device definitions */
-+#define UBI32_SERDES_NAME "ttyUS" // XXX
-+#define UBI32_SERDES_MAJOR 206 // XXX
-+#define UBI32_SERDES_MINOR 64 // XXX
-+
-+#define PORT_UBI32_SERDES 1234
-+#define NR_PORTS 1
-+
-+struct uart_port ubi32_serdes_ports[NR_PORTS];
-+
-+struct ubi32_serdes_resource {
-+ void *uart_base_addr;
-+ int uart_irq;
-+ int uart_clock;
-+} ubi32_serdes_resource[NR_PORTS] = {
-+ /*
-+ * Get params from kernel command line (required for early printk)
-+ * or from platform resources.
-+ */
-+ {0, 0, 0}
-+};
-+
-+/*
-+ * Can get overridden by 'serdes=' kernel command line.
-+ */
-+static int ubi32_serdes_default_baud_rate = 115200;
-+
-+
-+#define IO_PORT(port) ((struct ubicom32_io_port *)port->membase)
-+#define IO_PORT_INT_STATUS(port) (IO_PORT(port)->int_status)
-+#define IO_PORT_INT_MASK(port) (IO_PORT(port)->int_mask)
-+#define IO_PORT_INT_CLR(port) (IO_PORT(port)->int_clr)
-+
-+
-+/*
-+ * ubi32_serdes_get_char()
-+ */
-+static u8_t ubi32_serdes_get_char(struct ubicom32_io_port *io_port)
-+{
-+ /*
-+ * Read from hardware (forced 32-bit atomic read).
-+ */
-+ u32_t data = 0;
-+
-+ if ( io_port ) {
-+ io_port->int_clr = IO_PORTX_INT_SERDES_RXBF;
-+ asm volatile (
-+ "move.4 %0, %1 \n\t"
-+ : "=r" (data)
-+ : "m" (*(u32_t *)&(io_port->rx_fifo))
-+ );
-+ }
-+
-+ return (u8_t)(data & 0x000000ff);
-+}
-+
-+/*
-+ * ubi32_serdes_put_char()
-+ */
-+static void ubi32_serdes_put_char(struct ubicom32_io_port *io_port, u8_t c)
-+{
-+ u32_t data = 0x0000fe00 | (c << 1);
-+
-+ if ( io_port ) {
-+ /*
-+ * Fixed data format:
-+ * [LSB]1 start bit - 8 data bits - no parity - 1 stop bit[MSB]
-+ */
-+ io_port->int_clr = IO_PORTX_INT_SERDES_TXBE;
-+ io_port->ctl2 = data;
-+ io_port->int_set = IO_PORTX_INT_SERDES_TXBUF_VALID;
-+ }
-+}
-+
-+static void ubi32_serdes_hw_init(struct uart_port *port, int baud)
-+{
-+ struct ubicom32_io_port *io_port = IO_PORT(port);
-+
-+ if ( io_port ) {
-+ /*
-+ * Put port functions 1-4 into reset state.
-+ * Function 0 (GPIO) does not need or have a reset bit.
-+ *
-+ * Select SERDES function for restart below.
-+ */
-+ io_port->function =
-+ IO_FUNC_FUNCTION_RESET(1) | IO_FUNC_FUNCTION_RESET(2) |
-+ IO_FUNC_FUNCTION_RESET(3) | IO_FUNC_FUNCTION_RESET(4) |
-+ IO_PORTX_FUNC_SERDES;
-+
-+ /*
-+ * Configure SERDES baudrate
-+ */
-+ if ( baud == 0 ) {
-+ baud = ubi32_serdes_default_baud_rate;
-+ }
-+
-+ io_port->ctl0 =
-+ SERIAL_UBICOM_CTL0 |
-+ ((port->uartclk / (16 * baud)) - 1);
-+
-+ io_port->ctl1 =
-+ SERIAL_UBICOM_CTL1;
-+
-+ /*
-+ * don't interrupt until startup and start_tx
-+ */
-+ io_port->int_mask = 0;
-+
-+ /*
-+ * Set TXD pin output, RXD input and prevent GPIO
-+ * override on the TXD & RXD pins
-+ */
-+ io_port->gpio_ctl &= ~SERIAL_UBICOM_PIN_RXD;
-+ io_port->gpio_ctl |= SERIAL_UBICOM_PIN_TXD;
-+ io_port->gpio_mask &= ~(SERIAL_UBICOM_PIN_RXD | SERIAL_UBICOM_PIN_TXD);
-+
-+ /*
-+ * Restart (un-reset) the port's SERDES function.
-+ */
-+ io_port->function &= ~(IO_FUNC_FUNCTION_RESET(IO_PORTX_FUNC_SERDES));
-+ }
-+}
-+
-+#define ULITE_STATUS_RXVALID IO_PORTX_INT_SERDES_RXBF
-+#define ULITE_STATUS_OVERRUN 0
-+#define ULITE_STATUS_FRAME 0
-+#define ULITE_STATUS_PARITY 0
-+#define ULITE_STATUS_TXEMPTY IO_PORTX_INT_SERDES_TXBE
-+#define ULITE_STATUS_TXFULL 0
-+
-+static int ubi32_serdes_receive(struct uart_port *port, int stat)
-+{
-+ struct tty_struct *tty = port->info->port.tty;
-+ unsigned char ch = 0;
-+ char flag = TTY_NORMAL;
-+
-+ if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
-+ | ULITE_STATUS_FRAME)) == 0)
-+ return 0;
-+
-+ /* stats */
-+ if (stat & ULITE_STATUS_RXVALID) {
-+ port->icount.rx++;
-+ ch = ubi32_serdes_get_char((struct ubicom32_io_port *)port->membase);
-+
-+ if (stat & ULITE_STATUS_PARITY)
-+ port->icount.parity++;
-+ }
-+
-+ if (stat & ULITE_STATUS_OVERRUN)
-+ port->icount.overrun++;
-+
-+ if (stat & ULITE_STATUS_FRAME)
-+ port->icount.frame++;
-+
-+
-+ /* drop byte with parity error if IGNPAR specificed */
-+ if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
-+ stat &= ~ULITE_STATUS_RXVALID;
-+
-+ stat &= port->read_status_mask;
-+
-+ if (stat & ULITE_STATUS_PARITY)
-+ flag = TTY_PARITY;
-+
-+ stat &= ~port->ignore_status_mask;
-+
-+ if (stat & ULITE_STATUS_RXVALID)
-+ tty_insert_flip_char(tty, ch, flag);
-+
-+ if (stat & ULITE_STATUS_FRAME)
-+ tty_insert_flip_char(tty, 0, TTY_FRAME);
-+
-+ if (stat & ULITE_STATUS_OVERRUN)
-+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-+
-+ return 1;
-+}
-+
-+/*
-+ * interrupts are disabled on entry
-+ */
-+static void ubi32_serdes_stop_tx(struct uart_port *port)
-+{
-+ IO_PORT_INT_MASK(port) = IO_PORT_INT_MASK(port) & ~IO_PORTX_INT_SERDES_TXBE;
-+}
-+
-+static int ubi32_serdes_transmit(struct uart_port *port, int stat)
-+{
-+ struct circ_buf *xmit = &port->info->xmit;
-+
-+ if (!(stat & IO_PORTX_INT_SERDES_TXBE))
-+ return 0;
-+
-+ if (port->x_char) {
-+ ubi32_serdes_put_char(IO_PORT(port), port->x_char);
-+ port->x_char = 0;
-+ port->icount.tx++;
-+ return 1;
-+ }
-+
-+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+ ubi32_serdes_stop_tx(port);
-+ return 0;
-+ }
-+
-+ ubi32_serdes_put_char(IO_PORT(port), xmit->buf[xmit->tail]);
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
-+ port->icount.tx++;
-+
-+ /* wake up */
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+
-+ if (uart_circ_empty(xmit))
-+ ubi32_serdes_stop_tx(port);
-+
-+ return 1;
-+}
-+
-+/*
-+ * port is locked and interrupts are disabled
-+ */
-+static void ubi32_serdes_start_tx(struct uart_port *port)
-+{
-+ IO_PORT_INT_MASK(port) = IO_PORT_INT_MASK(port) | IO_PORTX_INT_SERDES_TXBE;
-+ ubi32_serdes_transmit(port, IO_PORT_INT_STATUS(port));
-+}
-+
-+/*
-+ * Interrupts are enabled
-+ */
-+static void ubi32_serdes_stop_rx(struct uart_port *port)
-+{
-+ /* don't forward any more data (like !CREAD) */
-+ port->ignore_status_mask = IO_PORTX_INT_SERDES_RXBF;
-+}
-+
-+/*
-+ * Set the modem control timer to fire immediately.
-+ */
-+static void ubi32_serdes_enable_ms(struct uart_port *port)
-+{
-+ /* N/A */
-+}
-+
-+static irqreturn_t ubi32_serdes_isr(int irq, void *dev_id)
-+{
-+ struct uart_port *port = dev_id;
-+ int busy;
-+
-+ spin_lock(&port->lock);
-+
-+ do {
-+ int stat = IO_PORT_INT_STATUS(port);
-+ busy = ubi32_serdes_receive(port, stat);
-+ busy |= ubi32_serdes_transmit(port, stat);
-+ } while (busy);
-+
-+ tty_flip_buffer_push(port->info->port.tty);
-+
-+ spin_unlock(&port->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Return TIOCSER_TEMT when transmitter is not busy.
-+ */
-+static unsigned int ubi32_serdes_tx_empty(struct uart_port *port)
-+{
-+ unsigned long flags;
-+ unsigned int ret;
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+ ret = IO_PORT_INT_STATUS(port);
-+ spin_unlock_irqrestore(&port->lock, flags);
-+
-+ return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
-+}
-+
-+static unsigned int ubi32_serdes_get_mctrl(struct uart_port *port)
-+{
-+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-+}
-+
-+static void ubi32_serdes_set_mctrl(struct uart_port *port, unsigned int mctrl)
-+{
-+ /* N/A */
-+}
-+
-+/*
-+ * Interrupts are always disabled.
-+ */
-+static void ubi32_serdes_break_ctl(struct uart_port *port, int break_state)
-+{
-+ /* N/A */
-+}
-+
-+static int ubi32_serdes_startup(struct uart_port *port)
-+{
-+ if (request_irq(port->irq, ubi32_serdes_isr, IRQF_DISABLED,
-+ "UBI32_SERDES", port)) {
-+ printk(KERN_NOTICE "Unable to attach port interrupt\n");
-+ return -EBUSY;
-+ }
-+
-+ IO_PORT_INT_CLR(port) = IO_PORTX_INT_SERDES_RXBF;
-+ IO_PORT_INT_MASK(port) = IO_PORTX_INT_SERDES_RXBF;
-+ return 0;
-+}
-+
-+static void ubi32_serdes_shutdown(struct uart_port *port)
-+{
-+ struct ubi32_serdes_port *uart = (struct ubi32_serdes_port *)port;
-+
-+ IO_PORT_INT_MASK(port) = 0;
-+ free_irq(port->irq, uart);
-+}
-+
-+static void
-+ubi32_serdes_set_termios(struct uart_port *port, struct ktermios *termios,
-+ struct ktermios *old)
-+{
-+ unsigned long flags;
-+ unsigned int baud;
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+
-+ port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
-+ | ULITE_STATUS_TXFULL;
-+
-+ if (termios->c_iflag & INPCK)
-+ port->read_status_mask |=
-+ ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
-+
-+ port->ignore_status_mask = 0;
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= ULITE_STATUS_PARITY
-+ | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
-+
-+ /* ignore all characters if CREAD is not set */
-+ if ((termios->c_cflag & CREAD) == 0)
-+ port->ignore_status_mask |=
-+ ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
-+ | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
-+
-+ /* update timeout */
-+ baud = uart_get_baud_rate(port, termios, old, 0, 460800);
-+ uart_update_timeout(port, termios->c_cflag, baud);
-+
-+ IO_PORT(port)->ctl0 = SERIAL_UBICOM_CTL0 |
-+ ((port->uartclk / (16 * baud)) - 1);
-+
-+ spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+static const char *ubi32_serdes_type(struct uart_port *port)
-+{
-+ return port->type == PORT_UBI32_SERDES ? "UBI32_SERDES" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'.
-+ */
-+static void ubi32_serdes_release_port(struct uart_port *port)
-+{
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'.
-+ */
-+static int ubi32_serdes_request_port(struct uart_port *port)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void ubi32_serdes_config_port(struct uart_port *port, int flags)
-+{
-+ if (flags & UART_CONFIG_TYPE &&
-+ ubi32_serdes_request_port(port) == 0)
-+ port->type = PORT_UBI32_SERDES;
-+}
-+
-+/*
-+ * Verify the new serial_struct (for TIOCSSERIAL).
-+ * The only change we allow are to the flags and type, and
-+ * even then only between PORT_UBI32_SERDES and PORT_UNKNOWN
-+ */
-+static int
-+ubi32_serdes_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ return 0;
-+}
-+
-+static struct uart_ops ubi32_serdes_pops = {
-+ .tx_empty = ubi32_serdes_tx_empty,
-+ .set_mctrl = ubi32_serdes_set_mctrl,
-+ .get_mctrl = ubi32_serdes_get_mctrl,
-+ .stop_tx = ubi32_serdes_stop_tx,
-+ .start_tx = ubi32_serdes_start_tx,
-+ .stop_rx = ubi32_serdes_stop_rx,
-+ .enable_ms = ubi32_serdes_enable_ms,
-+ .break_ctl = ubi32_serdes_break_ctl,
-+ .startup = ubi32_serdes_startup,
-+ .shutdown = ubi32_serdes_shutdown,
-+ .set_termios = ubi32_serdes_set_termios,
-+ .type = ubi32_serdes_type,
-+ .release_port = ubi32_serdes_release_port,
-+ .request_port = ubi32_serdes_request_port,
-+ .config_port = ubi32_serdes_config_port,
-+ .verify_port = ubi32_serdes_verify_port,
-+};
-+
-+static void __init ubi32_serdes_init_ports(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ ubi32_serdes_ports[i].uartclk = ubi32_serdes_resource[i].uart_clock;
-+ ubi32_serdes_ports[i].ops = &ubi32_serdes_pops;
-+ ubi32_serdes_ports[i].line = i;
-+ ubi32_serdes_ports[i].iotype = UPIO_MEM;
-+ ubi32_serdes_ports[i].membase =
-+ (void __iomem *)ubi32_serdes_resource[i].uart_base_addr;
-+ ubi32_serdes_ports[i].mapbase =
-+ (resource_size_t)ubi32_serdes_resource[i].uart_base_addr;
-+ ubi32_serdes_ports[i].irq =
-+ ubi32_serdes_resource[i].uart_irq;
-+ ubi32_serdes_ports[i].flags = UPF_BOOT_AUTOCONF;
-+
-+ ubi32_serdes_hw_init(&ubi32_serdes_ports[i], 0);
-+ }
-+
-+}
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
-+/*
-+ * If the port was already initialised (eg, by a boot loader),
-+ * try to determine the current setup.
-+ */
-+static void __init
-+ubi32_serdes_console_get_options(struct uart_port *port, int *baud)
-+{
-+ u32 round_to = 1200;
-+ u32 real_baud;
-+
-+ /*
-+ * We might get called before platform init and with no
-+ * kernel command line options, so port might be NULL.
-+ */
-+ *baud = ubi32_serdes_default_baud_rate;;
-+ if ( IO_PORT(port) == 0 )
-+ return;
-+
-+ real_baud = port->uartclk
-+ / (16 * ((IO_PORT(port)->ctl0 & ~SERIAL_UBICOM_CTL0) + 1));
-+
-+ *baud = ((real_baud + round_to - 1) / round_to) * round_to;
-+
-+ pr_debug("%s:baud = %d, real_baud = %d\n", __FUNCTION__, *baud, real_baud);
-+}
-+#endif
-+
-+#if defined(CONFIG_SERIAL_UBI32_SERDES_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-+static struct uart_driver ubi32_serdes_reg;
-+
-+static int __init
-+ubi32_serdes_console_setup(struct console *co, char *options)
-+{
-+ struct uart_port *port;
-+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
-+ int baud = ubi32_serdes_default_baud_rate;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow = 'n';
-+#endif
-+
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ if (co->index == -1 || co->index >= NR_PORTS)
-+ co->index = 0;
-+ port = &ubi32_serdes_ports[co->index];
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
-+ if (options) {
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ ubi32_serdes_hw_init(port, baud);
-+ }
-+ else
-+ ubi32_serdes_console_get_options(port, &baud);
-+
-+ return uart_set_options(port, co, baud, parity, bits, flow);
-+#else
-+ return 0;
-+#endif
-+}
-+#endif /* defined (CONFIG_SERIAL_UBI32_SERDES_CONSOLE) ||
-+ defined (CONFIG_EARLY_PRINTK) */
-+
-+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
-+static void
-+ubi32_serdes_console_putchar(struct uart_port *port, int ch)
-+{
-+ if ( IO_PORT(port) ) {
-+ while (!(IO_PORT_INT_STATUS(port) & IO_PORTX_INT_SERDES_TXBE))
-+ barrier();
-+ ubi32_serdes_put_char(IO_PORT(port), ch);
-+ }
-+}
-+
-+/*
-+ * Interrupts are disabled on entering
-+ */
-+static void
-+ubi32_serdes_console_write(struct console *co, const char *s, unsigned int count)
-+{
-+ struct uart_port *port = &ubi32_serdes_ports[co->index];
-+ unsigned long flags = 0;
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+ uart_console_write(port, s, count, ubi32_serdes_console_putchar);
-+ spin_unlock_irqrestore(&port->lock, flags);
-+
-+}
-+
-+static struct console ubi32_serdes_console = {
-+ .name = UBI32_SERDES_NAME,
-+ .write = ubi32_serdes_console_write,
-+ .device = uart_console_device,
-+ .setup = ubi32_serdes_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &ubi32_serdes_reg,
-+};
-+
-+static int __init ubi32_serdes_console_init(void)
-+{
-+ ubi32_serdes_init_ports();
-+ register_console(&ubi32_serdes_console);
-+ return 0;
-+}
-+console_initcall(ubi32_serdes_console_init);
-+
-+#define UBI32_SERDES_CONSOLE &ubi32_serdes_console
-+#else
-+#define UBI32_SERDES_CONSOLE NULL
-+#endif /* CONFIG_SERIAL_UBI32_SERDES_CONSOLE */
-+
-+
-+#ifdef CONFIG_EARLY_PRINTK
-+static __init void ubi32_serdes_early_putc(struct uart_port *port, int ch)
-+{
-+ unsigned timeout = 0xffff;
-+
-+ while ((!(IO_PORT_INT_STATUS(port) & IO_PORTX_INT_SERDES_TXBE)) && --timeout)
-+ cpu_relax();
-+ ubi32_serdes_put_char(IO_PORT(port), ch);
-+}
-+
-+static __init void ubi32_serdes_early_write(struct console *con, const char *s,
-+ unsigned int n)
-+{
-+ struct uart_port *port = &ubi32_serdes_ports[con->index];
-+ unsigned int i;
-+
-+ for (i = 0; i < n; i++, s++) {
-+ if (*s == '\n')
-+ ubi32_serdes_early_putc(port, '\r');
-+ ubi32_serdes_early_putc(port, *s);
-+ }
-+}
-+
-+static struct __init console ubi32_serdes_early_console = {
-+ .name = "early_US",
-+ .write = ubi32_serdes_early_write,
-+ .device = uart_console_device,
-+ .flags = CON_PRINTBUFFER,
-+ .setup = ubi32_serdes_console_setup,
-+ .index = -1,
-+ .data = &ubi32_serdes_reg,
-+};
-+
-+/*
-+ * XXX Unused in our driver. Need to find out what the termios initialization is good/needed for.
-+ */
-+struct console __init *ubi32_serdes_early_init(unsigned int port_index,
-+ unsigned int cflag)
-+{
-+ struct uart_port *uart;
-+ struct ktermios t;
-+
-+ if (port_index == -1 || port_index >= NR_PORTS)
-+ port_index = 0;
-+ ubi32_serdes_init_ports();
-+ ubi32_serdes_early_console.index = port_index;
-+ uart = &ubi32_serdes_ports[port_index];
-+ t.c_cflag = cflag;
-+ t.c_iflag = 0;
-+ t.c_oflag = 0;
-+ t.c_lflag = ICANON;
-+ t.c_line = port_index;
-+ ubi32_serdes_set_termios(uart, &t, &t);
-+ return &ubi32_serdes_early_console;
-+}
-+
-+#endif /* CONFIG_SERIAL_UBI32_SERDES_CONSOLE */
-+
-+static struct uart_driver ubi32_serdes_reg = {
-+ .owner = THIS_MODULE,
-+ .driver_name = "ubi32_serdes",
-+ .dev_name = UBI32_SERDES_NAME,
-+ .major = UBI32_SERDES_MAJOR,
-+ .minor = UBI32_SERDES_MINOR,
-+ .nr = NR_PORTS,
-+ .cons = UBI32_SERDES_CONSOLE,
-+};
-+
-+static int ubi32_serdes_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct uart_port *port = platform_get_drvdata(dev);
-+
-+ if (port)
-+ uart_suspend_port(&ubi32_serdes_reg, port);
-+
-+ return 0;
-+}
-+
-+static int ubi32_serdes_resume(struct platform_device *dev)
-+{
-+ struct uart_port *port = platform_get_drvdata(dev);
-+
-+ if (port)
-+ uart_resume_port(&ubi32_serdes_reg, port);
-+
-+ return 0;
-+}
-+
-+static int ubi32_serdes_probe(struct platform_device *dev)
-+{
-+ struct resource *res = dev->resource;
-+ int i;
-+
-+ for (i = 0; i < dev->num_resources; i++, res++) {
-+ if (res->flags & IORESOURCE_MEM) {
-+ ubi32_serdes_resource[0].uart_base_addr = (void *) res->start;
-+ }
-+ else if (res->flags & IORESOURCE_IRQ) {
-+ ubi32_serdes_resource[0].uart_irq = res->start;
-+ }
-+ else if (res->flags & UBICOM32_SUART_IORESOURCE_CLOCK) {
-+ ubi32_serdes_resource[0].uart_clock = res->start;
-+ }
-+ }
-+
-+ ubi32_serdes_init_ports();
-+
-+ return 0;
-+}
-+
-+static int ubi32_serdes_remove(struct platform_device *pdev)
-+{
-+ struct uart_port *port = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (port)
-+ uart_remove_one_port(&ubi32_serdes_reg, port);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubi32_serdes_driver = {
-+ .remove = ubi32_serdes_remove,
-+ .suspend = ubi32_serdes_suspend,
-+ .resume = ubi32_serdes_resume,
-+ .driver = {
-+ .name = "ubicom32suart",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+#ifndef MODULE
-+/*
-+ * Called at boot time.
-+ *
-+ * You can specify IO base, IRQ, and clock for the serdes serial port
-+ * using kernel command line "serdes=0xiobase,irq,clock". Values
-+ * specified will be overwritten by platform device data, if present.
-+ */
-+static int __init ubi32_serdes_setup(char *str)
-+{
-+#define N_PARMS (4+1)
-+ int ints[N_PARMS];
-+ int i;
-+
-+ str = get_options(str, ARRAY_SIZE(ints), ints);
-+
-+ for (i = 0; i < N_PARMS; i++) {
-+ if (i < ints[0]) {
-+ if (i == 0) {
-+ ubi32_serdes_resource[0].uart_base_addr = (void *) ints[i+1];
-+ }
-+ else if (i == 1) {
-+ ubi32_serdes_resource[0].uart_irq = ints[i+1];
-+ }
-+ else if (i == 2) {
-+ ubi32_serdes_resource[0].uart_clock = ints[i+1];
-+ }
-+ else if (i == 3) {
-+ ubi32_serdes_default_baud_rate = ints[i+1];
-+ }
-+ }
-+ }
-+ return 1;
-+}
-+
-+__setup("serdes=", ubi32_serdes_setup);
-+#endif
-+
-+static int __init ubi32_serdes_init(void)
-+{
-+ int ret;
-+
-+ pr_info("Serial: Ubicom32 serdes uart serial driver\n");
-+
-+ ret = platform_driver_probe(&ubi32_serdes_driver, ubi32_serdes_probe);
-+ if (ret != 0) {
-+ printk(KERN_INFO "serdes platform_driver_probe() failed: %d\n", ret);
-+ return ret;
-+ }
-+
-+ ubi32_serdes_init_ports();
-+
-+ ret = uart_register_driver(&ubi32_serdes_reg);
-+ if ( ret == 0 ) {
-+ ret = uart_add_one_port(&ubi32_serdes_reg, &ubi32_serdes_ports[0]);
-+ if ( ret != 0 ) {
-+ uart_unregister_driver(&ubi32_serdes_reg);
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static void __exit ubi32_serdes_exit(void)
-+{
-+ platform_driver_unregister(&ubi32_serdes_driver);
-+ uart_unregister_driver(&ubi32_serdes_reg);
-+}
-+
-+module_init(ubi32_serdes_init);
-+module_exit(ubi32_serdes_exit);
-+
-+MODULE_AUTHOR("Rainer Keller <rkeller@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom generic serial port driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_CHARDEV_MAJOR(UBI32_SERDES_MAJOR);
-+MODULE_ALIAS("platform:ubi32_serdes");
-diff -ruN linux-2.6.30.10/drivers/serial/ubi32_uarttio.c linux-2.6.30.10-ubi/drivers/serial/ubi32_uarttio.c
---- linux-2.6.30.10/drivers/serial/ubi32_uarttio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/serial/ubi32_uarttio.c 2009-12-11 11:45:19.000000000 +0200
-@@ -0,0 +1,1172 @@
-+/*
-+ * drivers/serial/ubi32_uarttio.c
-+ * Ubicom32 Serial Virtual Peripherial Driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+#include <linux/platform_device.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/ip5000.h>
-+#include <asm/gpio.h>
-+#include <asm/thread.h>
-+#include <asm/uart_tio.h>
-+
-+#define DRIVER_NAME "ubi32_uarttio"
-+
-+/*
-+ * For storing the module parameters.
-+ */
-+#define UBI32_UARTTIO_MAX_PARAM_LEN 80
-+static char utio_ports_param[UBI32_UARTTIO_MAX_PARAM_LEN];
-+
-+/*
-+ * UART name and device definitions
-+ */
-+#define UBI32_UARTTIO_NAME "ttyUV" // XXX
-+#define UBI32_UARTTIO_MAJOR 206 // XXX
-+#define UBI32_UARTTIO_MINOR 64 // XXX
-+
-+/*
-+ * The following structures are allocated statically because the
-+ * memory allocation subsystem is not initialized this early on
-+ */
-+
-+/*
-+ * Per port structure
-+ */
-+struct ubi32_uarttio_port {
-+ struct uarttio_uart *uart;
-+ unsigned int tx_pin;
-+ unsigned int rx_pin;
-+
-+ struct uart_port port;
-+
-+ u8_t added;
-+
-+ /*
-+ * If this value is set, the port has had its direction set already
-+ */
-+ u8_t port_init;
-+};
-+static struct ubi32_uarttio_port uarttio_ports[CONFIG_SERIAL_UBI32_UARTTIO_NR_UARTS];
-+
-+/*
-+ * Number of ports currently initialized
-+ */
-+static int uarttio_nports;
-+
-+/*
-+ * Per device structure
-+ */
-+struct ubi32_uarttio_instance {
-+ struct uarttio_regs *regs;
-+ struct ubi32_uarttio_port *ports;
-+
-+ u8_t irq_requested;
-+ u8_t driver_registered;
-+ u8_t irq;
-+};
-+static struct ubi32_uarttio_instance uarttio_inst;
-+
-+#ifdef CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE
-+static struct console ubi32_uarttio_console;
-+#define UBI32_UARTTIO_CONSOLE &ubi32_uarttio_console
-+#else
-+#define UBI32_UARTTIO_CONSOLE NULL
-+#endif
-+
-+static struct uart_driver ubi32_uarttio_uart_driver = {
-+ .owner = THIS_MODULE,
-+ .driver_name = DRIVER_NAME,
-+ .dev_name = UBI32_UARTTIO_NAME,
-+ .major = UBI32_UARTTIO_MAJOR,
-+ .minor = UBI32_UARTTIO_MINOR,
-+ .cons = UBI32_UARTTIO_CONSOLE,
-+};
-+
-+#ifdef UBI32_UARTTIO_UNUSED
-+/*
-+ * ubi32_uarttio_get_send_space
-+ */
-+static int ubi32_uarttio_get_send_space(struct uarttio_uart *uart)
-+{
-+ int count = uart->tx_fifo_head - uart->tx_fifo_tail;
-+ if (count < 0) {
-+ count += uart->tx_fifo_size;
-+ }
-+ return uart->tx_fifo_size - count;
-+}
-+#endif
-+
-+/*
-+ * ubi32_uarttio_get_recv_ready
-+ */
-+static int ubi32_uarttio_get_recv_ready(struct uarttio_uart *uart)
-+{
-+ int count = uart->rx_fifo_head - uart->rx_fifo_tail;
-+ if (count < 0) {
-+ count += uart->rx_fifo_size;
-+ }
-+ return count;
-+}
-+
-+/*
-+ * ubi32_uarttio_get_char()
-+ */
-+static u8_t ubi32_uarttio_get_char(struct uarttio_uart *uart)
-+{
-+ /*
-+ * Retrieve byte
-+ */
-+ u32_t tail = uart->rx_fifo_tail;
-+ u8_t data = uart->rx_fifo[tail];
-+
-+ if (++tail == uart->rx_fifo_size) {
-+ tail = 0;
-+ }
-+ uart->rx_fifo_tail = tail;
-+
-+ return data;
-+}
-+
-+/*
-+ * ubi32_uarttio_put_char()
-+ */
-+static int ubi32_uarttio_put_char(struct uarttio_uart *uart, u8_t c)
-+{
-+ u32_t head = uart->tx_fifo_head;
-+ u32_t prev = head;
-+
-+ /*
-+ * Wrap
-+ */
-+ if (++head == uart->tx_fifo_size) {
-+ head = 0;
-+ }
-+
-+ /*
-+ * If there isn't any space, return EBUSY
-+ */
-+ if (head == uart->tx_fifo_tail) {
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Put the character in the queue
-+ */
-+ uart->tx_fifo[prev] = c;
-+ uart->tx_fifo_head = head;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_uarttio_set_baud
-+ */
-+static int ubi32_uarttio_set_baud(struct ubi32_uarttio_port *uup, unsigned int baud)
-+{
-+ if (uup->uart->current_baud_rate == baud) {
-+ return 0;
-+ }
-+
-+ uup->uart->baud_rate = baud;
-+ uup->uart->flags |= UARTTIO_UART_FLAG_SET_RATE;
-+ while (uup->uart->flags & UARTTIO_UART_FLAG_SET_RATE) {
-+ cpu_relax();
-+ }
-+
-+ if (uup->uart->current_baud_rate != baud) {
-+ /*
-+ * Failed to set baud rate
-+ */
-+ printk(KERN_WARNING "Invalid baud rate %u, running at %u\n", baud, uup->uart->current_baud_rate);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_uarttio_handle_receive
-+ */
-+static void ubi32_uarttio_handle_receive(struct ubi32_uarttio_port *uup, int stat)
-+{
-+ struct uarttio_uart *uart = uup->uart;
-+ struct uart_port *port = &uup->port;
-+ struct tty_struct *tty = port->info->port.tty;
-+ unsigned char ch = 0;
-+ char flag = TTY_NORMAL;
-+ int count;
-+
-+ if ((stat & (UARTTIO_UART_INT_RX | UARTTIO_UART_INT_RXFRAME | UARTTIO_UART_INT_RXOVF)) == 0) {
-+ return;
-+ }
-+
-+ if (stat & UARTTIO_UART_INT_RX) {
-+ count = ubi32_uarttio_get_recv_ready(uart);
-+ port->icount.rx += count;
-+ }
-+
-+ if (stat & UARTTIO_UART_INT_RXOVF) {
-+ port->icount.overrun++;
-+ }
-+
-+ if (stat & UARTTIO_UART_INT_RXFRAME) {
-+ port->icount.frame++;
-+ }
-+
-+ stat &= ~port->ignore_status_mask;
-+
-+ if (stat & UARTTIO_UART_INT_RX) {
-+ int i;
-+ for (i = 0; i < count; i++) {
-+ ch = ubi32_uarttio_get_char(uart);
-+ tty_insert_flip_char(tty, ch, flag);
-+ }
-+ }
-+
-+ if (stat & UARTTIO_UART_INT_RXFRAME) {
-+ tty_insert_flip_char(tty, 0, TTY_FRAME);
-+ }
-+
-+ if (stat & UARTTIO_UART_INT_RXOVF) {
-+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-+ }
-+}
-+
-+/*
-+ * ubi32_uarttio_stop_tx
-+ * interrupts are disabled on entry
-+ */
-+static void ubi32_uarttio_stop_tx(struct uart_port *port)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+
-+ uup->uart->int_mask &= ~UARTTIO_UART_INT_TXBE;
-+}
-+
-+/*
-+ * ubi32_uarttio_handle_transmit
-+ */
-+static void ubi32_uarttio_handle_transmit(struct ubi32_uarttio_port *uup, int stat)
-+{
-+ struct uarttio_uart *uart = uup->uart;
-+ struct uart_port *port = &uup->port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+
-+ if (!(stat & UARTTIO_UART_INT_TXBE)) {
-+ return;
-+ }
-+
-+ if (port->x_char) {
-+ if (ubi32_uarttio_put_char(uart, port->x_char)) {
-+ return;
-+ }
-+ port->x_char = 0;
-+ port->icount.tx++;
-+ return;
-+ }
-+
-+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+ ubi32_uarttio_stop_tx(port);
-+ return;
-+ }
-+
-+ /*
-+ * Send as many characters as we can
-+ */
-+ while (ubi32_uarttio_put_char(uart, xmit->buf[xmit->tail]) == 0) {
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+ port->icount.tx++;
-+ if (uart_circ_empty(xmit)) {
-+ break;
-+ }
-+ }
-+
-+ /* wake up */
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
-+ uart_write_wakeup(port);
-+ }
-+
-+ if (uart_circ_empty(xmit)) {
-+ ubi32_uarttio_stop_tx(port);
-+ }
-+}
-+
-+/*
-+ * ubi32_uarttio_start_tx
-+ * port is locked and interrupts are disabled
-+ */
-+static void ubi32_uarttio_start_tx(struct uart_port *port)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+ struct uarttio_uart *uart = uup->uart;
-+
-+ uart->int_mask |= UARTTIO_UART_INT_TXBE;
-+}
-+
-+/*
-+ * ubi32_uarttio_stop_rx
-+ * Interrupts are enabled
-+ */
-+static void ubi32_uarttio_stop_rx(struct uart_port *port)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+ struct uarttio_uart *uart = uup->uart;
-+
-+ /*
-+ * don't forward any more data (like !CREAD)
-+ */
-+ uart->int_mask &= ~UARTTIO_UART_INT_RX;
-+ port->ignore_status_mask = UARTTIO_UART_INT_RX;
-+}
-+
-+/*
-+ * ubi32_uarttio_enable_ms
-+ * Set the modem control timer to fire immediately.
-+ */
-+static void ubi32_uarttio_enable_ms(struct uart_port *port)
-+{
-+ /* N/A */
-+}
-+
-+/*
-+ * ubi32_uarttio_isr
-+ */
-+static irqreturn_t ubi32_uarttio_isr(int irq, void *appdata)
-+{
-+ struct ubi32_uarttio_port *uup = uarttio_ports;
-+ int i;
-+
-+ /*
-+ * Service all of the ports
-+ */
-+ for (i = 0; i < uarttio_nports; i++) {
-+ unsigned int flags;
-+
-+ if (!(uup->uart->flags & UARTTIO_UART_FLAG_ENABLED)) {
-+ uup++;
-+ continue;
-+ }
-+
-+ spin_lock(&uup->port.lock);
-+
-+ flags = uup->uart->int_flags;
-+
-+ uup->uart->int_flags = 0;
-+
-+ ubi32_uarttio_handle_receive(uup, flags);
-+ ubi32_uarttio_handle_transmit(uup, flags);
-+
-+ tty_flip_buffer_push(uup->port.info->port.tty);
-+
-+ spin_unlock(&uup->port.lock);
-+
-+ uup++;
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * ubi32_uarttio_tx_empty
-+ * Return TIOCSER_TEMT when transmitter is not busy.
-+ */
-+static unsigned int ubi32_uarttio_tx_empty(struct uart_port *port)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+
-+ if (uup->uart->tx_fifo_head == uup->uart->tx_fifo_tail) {
-+ return TIOCSER_TEMT;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_uarttio_get_mctrl
-+ */
-+static unsigned int ubi32_uarttio_get_mctrl(struct uart_port *port)
-+{
-+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-+}
-+
-+/*
-+ * ubi32_uarttio_set_mctrl
-+ */
-+static void ubi32_uarttio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-+{
-+ /* N/A */
-+}
-+
-+/*
-+ * ubi32_uarttio_break_ctl
-+ */
-+static void ubi32_uarttio_break_ctl(struct uart_port *port, int break_state)
-+{
-+ /* N/A */
-+}
-+
-+/*
-+ * ubi32_uarttio_startup
-+ */
-+static int ubi32_uarttio_startup(struct uart_port *port)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+ struct uarttio_uart *uart = uup->uart;
-+
-+ uart->flags |= UARTTIO_UART_FLAG_ENABLED;
-+
-+ uart->int_mask |= UARTTIO_UART_INT_TXBE | UARTTIO_UART_INT_RX;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_uarttio_shutdown
-+ */
-+static void ubi32_uarttio_shutdown(struct uart_port *port)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+ struct uarttio_uart *uart = uup->uart;
-+
-+ uart->int_mask = 0;
-+ uart->flags &= ~UARTTIO_UART_FLAG_ENABLED;
-+}
-+
-+/*
-+ * ubi32_uarttio_set_termios
-+ */
-+static void ubi32_uarttio_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+ unsigned long flags;
-+ unsigned int baud;
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+
-+#if 0
-+ port->read_status_mask = UBI32_UARTTIO_RX | UBI32_UARTTIO_RXOVF | UBI32_UARTTIO_TXOVF;
-+
-+ if (termios->c_iflag & INPCK) {
-+ port->read_status_mask |= UBI32_UARTTIO_RXFRAME;
-+ }
-+#endif
-+
-+ port->ignore_status_mask = 0;
-+ if (termios->c_iflag & IGNPAR) {
-+ port->ignore_status_mask |= UARTTIO_UART_INT_RXFRAME |
-+ UARTTIO_UART_INT_RXOVF;
-+ }
-+
-+ /*
-+ * ignore all characters if CREAD is not set
-+ */
-+ if ((termios->c_cflag & CREAD) == 0) {
-+ port->ignore_status_mask |= UARTTIO_UART_INT_RX |
-+ UARTTIO_UART_INT_RXFRAME |
-+ UARTTIO_UART_INT_RXOVF;
-+ }
-+
-+ /* update timeout */
-+ baud = uart_get_baud_rate(port, termios, old, 0, 460800);
-+ uart_update_timeout(port, termios->c_cflag, baud);
-+
-+ ubi32_uarttio_set_baud(uup, baud);
-+ spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+/*
-+ * ubi32_uarttio_type
-+ */
-+static const char *ubi32_uarttio_type(struct uart_port *port)
-+{
-+ return (port->type == PORT_UBI32_UARTTIO) ? "UBI32_UARTTIO" : NULL;
-+}
-+
-+/*
-+ * ubi32_uarttio_release_port
-+ * Release the memory region(s) being used by 'port'.
-+ */
-+static void ubi32_uarttio_release_port(struct uart_port *port)
-+{
-+}
-+
-+/*
-+ * ubi32_uarttio_request_port
-+ * Request the memory region(s) being used by 'port'.
-+ */
-+static int ubi32_uarttio_request_port(struct uart_port *port)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_uarttio_config_port
-+ * Configure/autoconfigure the port.
-+ */
-+static void ubi32_uarttio_config_port(struct uart_port *port, int flags)
-+{
-+ if ((flags & UART_CONFIG_TYPE) && (ubi32_uarttio_request_port(port) == 0)) {
-+ port->type = PORT_UBI32_UARTTIO;
-+ }
-+}
-+
-+/*
-+ * ubi32_uarttio_verify_port
-+ * Verify the new serial_struct (for TIOCSSERIAL).
-+ *
-+ * The only change we allow are to the flags and type, and
-+ * even then only between PORT_UBI32_UARTTIO and PORT_UNKNOWN
-+ */
-+static int ubi32_uarttio_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ return 0;
-+}
-+
-+static struct uart_ops ubi32_uarttio_pops = {
-+ .tx_empty = ubi32_uarttio_tx_empty,
-+ .set_mctrl = ubi32_uarttio_set_mctrl,
-+ .get_mctrl = ubi32_uarttio_get_mctrl,
-+ .stop_tx = ubi32_uarttio_stop_tx,
-+ .start_tx = ubi32_uarttio_start_tx,
-+ .stop_rx = ubi32_uarttio_stop_rx,
-+ .enable_ms = ubi32_uarttio_enable_ms,
-+ .break_ctl = ubi32_uarttio_break_ctl,
-+ .startup = ubi32_uarttio_startup,
-+ .shutdown = ubi32_uarttio_shutdown,
-+ .set_termios = ubi32_uarttio_set_termios,
-+ .type = ubi32_uarttio_type,
-+ .release_port = ubi32_uarttio_release_port,
-+ .request_port = ubi32_uarttio_request_port,
-+ .config_port = ubi32_uarttio_config_port,
-+ .verify_port = ubi32_uarttio_verify_port,
-+};
-+
-+/*
-+ * ubi32_uarttio_add_ports
-+ */
-+static int __init ubi32_uarttio_add_ports(void)
-+{
-+ int res = 0;
-+ struct ubi32_uarttio_port *uup = uarttio_ports;
-+ int i = 0;
-+
-+ for (i = 0; i < uarttio_nports; i++) {
-+ /*
-+ * Setup the GPIOs
-+ */
-+ res = gpio_request(uup->tx_pin, "ubi32_uarttio_tx");
-+ if (res) {
-+ printk(KERN_WARNING "Failed to request GPIO %d\n", uup->tx_pin);
-+ res = -EBUSY;
-+ goto next;
-+ }
-+
-+ res = gpio_request(uup->rx_pin, "ubi32_uarttio_rx");
-+ if (res) {
-+ gpio_free(uup->tx_pin);
-+ printk(KERN_WARNING "Failed to request GPIO %d\n", uup->rx_pin);
-+ res = -EBUSY;
-+ goto next;
-+ }
-+
-+ res = uart_add_one_port(&ubi32_uarttio_uart_driver, &uup->port);
-+ if (res) {
-+ gpio_free(uup->rx_pin);
-+ gpio_free(uup->tx_pin);
-+ res = -ENODEV;
-+ printk(KERN_WARNING "Failed to add port %d,%d\n", uup->tx_pin, uup->rx_pin);
-+ goto next;
-+ }
-+ uup->added = 1;
-+
-+ /*
-+ * Set the direction of the ports now, after we're sure that everything is ok
-+ */
-+ if (!uup->port_init) {
-+ gpio_direction_output(uup->tx_pin, 1);
-+ gpio_direction_input(uup->rx_pin);
-+ }
-+
-+next:
-+ uup++;
-+ }
-+ return res;
-+}
-+
-+/*
-+ * ubi32_uarttio_cleanup
-+ */
-+static void ubi32_uarttio_cleanup(void)
-+{
-+ struct ubi32_uarttio_port *uup;
-+ int i;
-+
-+ /*
-+ * Stop the hardware thread
-+ */
-+ if (uarttio_inst.regs) {
-+ thread_disable(uarttio_inst.regs->thread);
-+ }
-+ if (uarttio_inst.irq_requested) {
-+ free_irq(uarttio_inst.irq, NULL);
-+ }
-+
-+ /*
-+ * Get rid of the ports
-+ */
-+ uup = uarttio_inst.ports;
-+ for (i = 0; i < uarttio_nports; i++) {
-+ gpio_free(uup->tx_pin);
-+ gpio_free(uup->rx_pin);
-+ if (uup->added) {
-+ uart_remove_one_port(&ubi32_uarttio_uart_driver, &uup->port);
-+ }
-+ uup++;
-+ }
-+
-+ if (uarttio_inst.driver_registered) {
-+ uart_unregister_driver(&ubi32_uarttio_uart_driver);
-+ }
-+}
-+
-+/*
-+ * ubi32_uarttio_setup_port
-+ * Setup a port in the TIO registers
-+ */
-+static int ubi32_uarttio_setup_port(int index,
-+ struct uarttio_uart *uart,
-+ unsigned int baud, unsigned int tx_pin,
-+ unsigned int rx_pin)
-+{
-+ struct ubi32_uarttio_port *uup = &uarttio_ports[index];
-+ void *tx_port = ubi_gpio_get_port(tx_pin);
-+ void *rx_port = ubi_gpio_get_port(rx_pin);
-+
-+ /*
-+ * Verify the ports are on chip
-+ */
-+ if (!tx_port || !rx_port) {
-+ printk(KERN_WARNING "Invalid port(s) specified: %u or %u\n", tx_pin, rx_pin);
-+ return -EINVAL;
-+ }
-+
-+ uup->tx_pin = tx_pin;
-+ uup->rx_pin = rx_pin;
-+ uup->uart = uart;
-+
-+ /*
-+ * Setup the port structure
-+ */
-+ uup->port.ops = &ubi32_uarttio_pops;
-+ uup->port.line = index;
-+ uup->port.iotype = UPIO_MEM;
-+ uup->port.flags = UPF_BOOT_AUTOCONF;
-+ uup->port.fifosize = uup->uart->tx_fifo_size;
-+ uup->port.private_data = uup;
-+
-+ /*
-+ * We share this IRQ across all ports
-+ */
-+ uup->port.irq = uarttio_inst.irq;
-+
-+ /*
-+ * We really don't have a mem/map base but without these variables
-+ * set, the serial_core won't startup.
-+ */
-+ uup->port.membase = (void __iomem *)uup;
-+ uup->port.mapbase = (resource_size_t)uup;
-+ spin_lock_init(&uup->port.lock);
-+
-+ /*
-+ * Set up the hardware
-+ */
-+ uart->flags = UARTTIO_UART_FLAG_SET_RATE | UARTTIO_UART_FLAG_RESET;
-+
-+ uart->tx_port = (unsigned int)tx_port;
-+ uart->tx_pin = gpio_pin_index(tx_pin);
-+ uart->tx_bits = 8;
-+ uart->tx_stop_bits = 1;
-+
-+ uart->rx_port = (unsigned int)rx_port;
-+ uart->rx_pin = gpio_pin_index(rx_pin);
-+ uart->rx_bits = 8;
-+ uart->rx_stop_bits = 1;
-+
-+ uart->baud_rate = baud;
-+
-+ return 0;
-+}
-+
-+enum ubi32_uarttio_parse_states {
-+ UBI32_UARTTIO_PARSE_STATE_BAUD,
-+ UBI32_UARTTIO_PARSE_STATE_TX_PIN,
-+ UBI32_UARTTIO_PARSE_STATE_RX_PIN,
-+ UBI32_UARTTIO_PARSE_STATE_HS,
-+ UBI32_UARTTIO_PARSE_STATE_CTS_PIN,
-+ UBI32_UARTTIO_PARSE_STATE_RTS_PIN,
-+};
-+
-+/*
-+ * ubi32_uarttio_parse_param
-+ */
-+static int ubi32_uarttio_parse_param(char *str)
-+{
-+ int res;
-+ int i;
-+ int baud = 0;
-+ int tx_pin = 0;
-+ int rx_pin = 0;
-+ int hs = 0;
-+ int cts_pin = 0;
-+ int rts_pin = 0;
-+ int nfound = 0;
-+ enum ubi32_uarttio_parse_states state = UBI32_UARTTIO_PARSE_STATE_BAUD;
-+ struct uarttio_uart *uart = uarttio_inst.regs->uarts;
-+
-+ /*
-+ * Run though the options and generate the proper structures
-+ */
-+ res = get_option(&str, &i);
-+ while ((res == 2) || (res == 1)) {
-+ switch (state) {
-+ case UBI32_UARTTIO_PARSE_STATE_BAUD:
-+ /*
-+ * If we are here and nfound > 0 then create the port
-+ * based on the previous input
-+ */
-+ if (nfound) {
-+ /*
-+ * Create the port
-+ */
-+ if (ubi32_uarttio_setup_port(nfound - 1, uart, baud, tx_pin, rx_pin)) {
-+ /*
-+ * Port was invalid
-+ */
-+ goto fail;
-+ } else {
-+ printk(KERN_INFO "Serial port %d: tx=%d:rx=%d @ %d\n", nfound, tx_pin, rx_pin, baud);
-+ uart++;
-+ }
-+ }
-+
-+ /*
-+ * Reset the variables and go to the next state
-+ */
-+ hs = 0;
-+ baud = i;
-+ state = UBI32_UARTTIO_PARSE_STATE_TX_PIN;
-+ break;
-+
-+ case UBI32_UARTTIO_PARSE_STATE_TX_PIN:
-+ tx_pin = i;
-+ state = UBI32_UARTTIO_PARSE_STATE_RX_PIN;
-+ break;
-+
-+ case UBI32_UARTTIO_PARSE_STATE_RX_PIN:
-+ rx_pin = i;
-+ state = UBI32_UARTTIO_PARSE_STATE_HS;
-+ break;
-+
-+ case UBI32_UARTTIO_PARSE_STATE_HS:
-+ hs = i;
-+ if (hs) {
-+ state = UBI32_UARTTIO_PARSE_STATE_CTS_PIN;
-+ break;
-+ }
-+
-+ if (nfound == uarttio_inst.regs->max_uarts) {
-+ printk(KERN_WARNING "Maximum number of serial ports reached\n");
-+ goto done;
-+ }
-+ nfound++;
-+ state = UBI32_UARTTIO_PARSE_STATE_BAUD;
-+ break;
-+
-+ case UBI32_UARTTIO_PARSE_STATE_CTS_PIN:
-+ cts_pin = i;
-+ state = UBI32_UARTTIO_PARSE_STATE_RTS_PIN;
-+ break;
-+
-+ case UBI32_UARTTIO_PARSE_STATE_RTS_PIN:
-+ rts_pin = i;
-+
-+ if (nfound == uarttio_inst.regs->max_uarts) {
-+ printk(KERN_WARNING "Maximum number of serial ports reached\n");
-+ goto done;
-+ }
-+ nfound++;
-+ state = UBI32_UARTTIO_PARSE_STATE_BAUD;
-+ break;
-+ }
-+ res = get_option(&str, &i);
-+ }
-+
-+ if ((res > 2) || state != UBI32_UARTTIO_PARSE_STATE_BAUD) {
-+ printk(KERN_WARNING "Parameter syntax error.\n");
-+ res = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Create the final port
-+ */
-+ if (ubi32_uarttio_setup_port(nfound - 1, uart, baud, tx_pin, rx_pin)) {
-+ goto fail;
-+ }
-+ printk(KERN_INFO "Serial port %d: tx=%d:rx=%d @ %d\n", nfound, tx_pin, rx_pin, baud);
-+
-+done:
-+ uarttio_nports = nfound;
-+
-+ return nfound ? 0 : -ENODEV;
-+
-+fail:
-+ /*
-+ * Reset the ports
-+ */
-+ uart = uarttio_inst.regs->uarts;
-+ for (i = 0; i < uarttio_inst.regs->max_uarts; i++) {
-+ uart->flags = 0;
-+ uart++;
-+ }
-+
-+ return res;
-+}
-+
-+/*
-+ * ubi32_uarttio_probe
-+ */
-+static int ubi32_uarttio_probe(void)
-+{
-+ int ret;
-+ struct uarttio_node *uart_node;
-+ char *str = utio_ports_param;
-+ static int probed;
-+ static int probe_result;
-+
-+ /*
-+ * We only want to be probed once, we could be probed twice
-+ * for example if we are used as a console
-+ */
-+ if (probed) {
-+ return probe_result;
-+ }
-+ probed = 1;
-+
-+ /*
-+ * Extract the TIO name from the setup string
-+ */
-+ while (*str) {
-+ if (*str == ',') {
-+ *str++ = 0;
-+ break;
-+ }
-+ str++;
-+ }
-+
-+ if (!*str) {
-+ probe_result = -EINVAL;
-+ return -EINVAL;
-+ }
-+
-+ uart_node = (struct uarttio_node *)devtree_find_node(utio_ports_param);
-+ if (!uart_node) {
-+ probe_result = -ENODEV;
-+ return -ENODEV;
-+ }
-+
-+ uarttio_inst.irq = uart_node->dn.recvirq;
-+ uarttio_inst.regs = uart_node->regs;
-+
-+ /*
-+ * Parse module parameters.
-+ */
-+ ret = ubi32_uarttio_parse_param(str);
-+ if (ret != 0) {
-+ ubi32_uarttio_cleanup();
-+ probe_result = ret;
-+ return ret;
-+ }
-+
-+ ubi32_uarttio_uart_driver.nr = uarttio_nports;
-+
-+ return 0;
-+}
-+
-+#if defined(CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE)
-+/*
-+ * ubi32_uarttio_console_setup
-+ */
-+static int __init ubi32_uarttio_console_setup(struct console *co, char *options)
-+{
-+ int baud;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow = 'n';
-+ struct ubi32_uarttio_port *uup;
-+
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ if (co->index == -1 || co->index >= uarttio_nports) {
-+ co->index = 0;
-+ }
-+ uup = &uarttio_ports[co->index];
-+ baud = uup->uart->baud_rate;
-+ uup->uart->flags |= UARTTIO_UART_FLAG_ENABLED;
-+
-+ /*
-+ * Setup the GPIOs
-+ * We have to use the direct interface because the gpio
-+ * subsystem is not available at this point.
-+ */
-+ uup->port_init = 1;
-+ UBICOM32_GPIO_SET_PIN_HIGH(uup->tx_pin);
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(uup->tx_pin);
-+ UBICOM32_GPIO_SET_PIN_INPUT(uup->rx_pin);
-+
-+ /*
-+ * Start the thread
-+ */
-+ thread_enable(uarttio_inst.regs->thread);
-+
-+ /*
-+ * Process options
-+ */
-+ if (options) {
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ if (ubi32_uarttio_set_baud(uup, baud)) {
-+ baud = uup->uart->current_baud_rate;
-+ }
-+ }
-+
-+ return uart_set_options(&uup->port, co, baud, 'n', 8, 'n');
-+}
-+
-+/*
-+ * ubi32_uarttio_console_putchar
-+ */
-+static void ubi32_uarttio_console_putchar(struct uart_port *port, int ch)
-+{
-+ struct ubi32_uarttio_port *uup = port->private_data;
-+
-+ while (ubi32_uarttio_put_char(uup->uart, ch)) {
-+ cpu_relax();
-+ }
-+}
-+
-+/*
-+ * ubi32_uarttio_console_write
-+ * Interrupts are disabled on entering
-+ */
-+static void ubi32_uarttio_console_write(struct console *co, const char *s, unsigned int count)
-+{
-+ struct uart_port *port = &(uarttio_ports[co->index].port);
-+ unsigned long flags = 0;
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+ uart_console_write(port, s, count, ubi32_uarttio_console_putchar);
-+ spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+static struct console ubi32_uarttio_console = {
-+ .name = UBI32_UARTTIO_NAME,
-+ .write = ubi32_uarttio_console_write,
-+ .device = uart_console_device,
-+ .setup = ubi32_uarttio_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &ubi32_uarttio_uart_driver,
-+};
-+
-+static int __init ubi32_uarttio_console_init(void)
-+{
-+ int res;
-+
-+ res = ubi32_uarttio_probe();
-+ if (res) {
-+ return res;
-+ }
-+
-+ register_console(&ubi32_uarttio_console);
-+ return 0;
-+}
-+console_initcall(ubi32_uarttio_console_init);
-+#endif /* CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE */
-+
-+/*
-+ * ubi32_serial_suspend
-+ */
-+static int ubi32_uarttio_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ int i;
-+ for (i = 0; i < uarttio_nports; i++) {
-+ uart_suspend_port(&ubi32_uarttio_uart_driver, &uarttio_ports[i].port);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_serial_resume
-+ */
-+static int ubi32_uarttio_resume(struct platform_device *pdev)
-+{
-+ int i;
-+ for (i = 0; i < uarttio_nports; i++) {
-+ uart_resume_port(&ubi32_uarttio_uart_driver, &uarttio_ports[i].port);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_uarttio_remove
-+ */
-+static int __devexit ubi32_uarttio_remove(struct platform_device *pdev)
-+{
-+ ubi32_uarttio_cleanup();
-+
-+ uart_unregister_driver(&ubi32_uarttio_uart_driver);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubi32_uarttio_platform_driver = {
-+ .remove = __devexit_p(ubi32_uarttio_remove),
-+ .suspend = ubi32_uarttio_suspend,
-+ .resume = ubi32_uarttio_resume,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+#ifndef MODULE
-+/*
-+ * Called at boot time.
-+ *
-+ * uarttio=TIONAME,(baud,tx_pin,rx_pin,handshake[,cts_pin,rts_pin],...)
-+ * TIONAME is the name of the devtree node which describes the UARTTIO
-+ * pin is the index of the pin, i.e. PA4 is 5 [(port * 32) + pin]
-+ * handshake = 1 to enable handshaking, provide cts_pin, rts_pin (UNSUPPORTED)
-+ * handshake = 0 to disable handshaking, do not provide cts_pin, rts_pin
-+ * Ex: uarttio=UARTTIO,57600,7,6,0,9600,8,9,0
-+ */
-+static int __init ubi32_uarttio_setup(char *str)
-+{
-+ strncpy(utio_ports_param, str, UBI32_UARTTIO_MAX_PARAM_LEN);
-+ utio_ports_param[UBI32_UARTTIO_MAX_PARAM_LEN - 1] = 0;
-+ return 1;
-+}
-+__setup("uarttio=", ubi32_uarttio_setup);
-+#endif
-+
-+/*
-+ * ubi32_uarttio_init
-+ */
-+static int __init ubi32_uarttio_init(void)
-+{
-+ int ret;
-+ int i;
-+
-+ ret = ubi32_uarttio_probe();
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Request the IRQ (do it here since many ports share the same IRQ)
-+ */
-+ ret = request_irq(uarttio_inst.irq, ubi32_uarttio_isr, IRQF_DISABLED, DRIVER_NAME, NULL);
-+ if (ret != 0) {
-+ printk(KERN_WARNING "Could not request IRQ %d\n", uarttio_inst.irq);
-+ goto fail;
-+ }
-+ uarttio_inst.irq_requested = 1;
-+
-+ /*
-+ * Register the UART driver and add the ports
-+ */
-+ ret = uart_register_driver(&ubi32_uarttio_uart_driver);
-+ if (ret != 0) {
-+ goto fail;
-+ }
-+ uarttio_inst.driver_registered = 1;
-+
-+ ret = ubi32_uarttio_add_ports();
-+ if (ret != 0) {
-+ ubi32_uarttio_cleanup();
-+ return ret;
-+ }
-+
-+ /*
-+ * Start the thread
-+ */
-+ thread_enable(uarttio_inst.regs->thread);
-+
-+ for (i = 0; i < uarttio_nports; i++) {
-+ pr_info("Serial: Ubicom32 uarttio #%d: tx:%d rx:%d baud:%d\n",
-+ i, uarttio_ports[i].tx_pin, uarttio_ports[i].rx_pin,
-+ uarttio_ports[i].uart->current_baud_rate);
-+ }
-+ pr_info("Serial: Ubicom32 uarttio started on thread:%d irq:%d\n", uarttio_inst.regs->thread, uarttio_inst.irq);
-+
-+ return ret;
-+
-+fail:
-+ ubi32_uarttio_cleanup();
-+ return ret;
-+}
-+module_init(ubi32_uarttio_init);
-+
-+/*
-+ * ubi32_uarttio_exit
-+ */
-+static void __exit ubi32_uarttio_exit(void)
-+{
-+ platform_driver_unregister(&ubi32_uarttio_platform_driver);
-+}
-+module_exit(ubi32_uarttio_exit);
-+
-+module_param_string(ports, utio_ports_param, sizeof(utio_ports_param), 0444);
-+MODULE_PARM_DESC(ports, "Sets the ports to allocate: ports=TIONAME,(baud,txpin,rxpin,handshake[,ctspin,rtspin],...)\n"
-+ " TIONAME is the name of the devtree node which describes the UARTTIO\n"
-+ " pin is the index of the pin, i.e. PA4 is 5 [(port * 32) + pin]\n"
-+ " handshake = 1 to enable handshaking, provide ctspin, rtspin (UNSUPPORTED)\n"
-+ " handshake = 0 to disable handshaking, do not provide ctspin, rtspin\n"
-+ " Ex: ports=UARTTIO,57600,7,6,0,9600,8,9,0\n");
-+MODULE_AUTHOR("Patrick Tjin <pat.tjin@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom serial virtual peripherial driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_CHARDEV_MAJOR(UBI32_UARTTIO_MAJOR);
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-diff -ruN linux-2.6.30.10/drivers/spi/Kconfig linux-2.6.30.10-ubi/drivers/spi/Kconfig
---- linux-2.6.30.10/drivers/spi/Kconfig 2009-12-14 11:54:29.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/spi/Kconfig 2009-12-14 11:54:27.000000000 +0200
-@@ -196,6 +196,15 @@
- help
- SPI driver for Samsung S3C24XX series ARM SoCs
-
-+config SPI_UBICOM32_GPIO
-+ tristate "Ubicom32 SPI over GPIO"
-+ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
-+ select SPI_BITBANG
-+ select HAS_DMA
-+ help
-+ SPI driver for the Ubicom32 architecture using
-+ GPIO lines to provide the SPI bus.
-+
- config SPI_S3C24XX_GPIO
- tristate "Samsung S3C24XX series SPI by GPIO"
- depends on ARCH_S3C2410 && EXPERIMENTAL
-diff -ruN linux-2.6.30.10/drivers/spi/Makefile linux-2.6.30.10-ubi/drivers/spi/Makefile
---- linux-2.6.30.10/drivers/spi/Makefile 2009-12-14 11:55:29.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/spi/Makefile 2009-12-14 11:55:25.000000000 +0200
-@@ -27,6 +27,7 @@
- obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
- obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
-+obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
-diff -ruN linux-2.6.30.10/drivers/spi/spi_ubicom32_gpio.c linux-2.6.30.10-ubi/drivers/spi/spi_ubicom32_gpio.c
---- linux-2.6.30.10/drivers/spi/spi_ubicom32_gpio.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/spi/spi_ubicom32_gpio.c 2009-12-11 11:45:19.000000000 +0200
-@@ -0,0 +1,267 @@
-+/*
-+ * drivers/spi_spi_ubicom32_gpio.c
-+ * Ubicom32 GPIO based SPI driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <linux/gpio.h>
-+
-+#include <asm/ubicom32-spi-gpio.h>
-+
-+#define DRIVER_NAME "ubicom32-spi-gpio"
-+
-+struct ubicom32_spi_gpio {
-+ struct spi_bitbang bitbang;
-+
-+ struct ubicom32_spi_gpio_platform_data *pdata;
-+
-+ struct platform_device *dev;
-+};
-+
-+/*
-+ * The following 4 functions are used by EXPAND_BITBANG_TXRX to bitbang the data out.
-+ */
-+static inline void setsck(struct spi_device *dev, int on)
-+{
-+ struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
-+ gpio_set_value(usg->pdata->pin_clk, on ? 1 : 0);
-+}
-+
-+static inline void setmosi(struct spi_device *dev, int on)
-+{
-+ struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
-+ gpio_set_value(usg->pdata->pin_mosi, on ? 1 : 0);
-+}
-+
-+static inline u32 getmiso(struct spi_device *dev)
-+{
-+ struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
-+ return gpio_get_value(usg->pdata->pin_miso) ? 1 : 0;
-+}
-+
-+#define spidelay(x) ndelay(x)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+/*
-+ * ubicom32_spi_gpio_txrx_mode0
-+ */
-+static u32 ubicom32_spi_gpio_txrx_mode0(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_txrx_mode1
-+ */
-+static u32 ubicom32_spi_gpio_txrx_mode1(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_txrx_mode2
-+ */
-+static u32 ubicom32_spi_gpio_txrx_mode2(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_txrx_mode3
-+ */
-+static u32 ubicom32_spi_gpio_txrx_mode3(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_chipselect
-+ */
-+static void ubicom32_spi_gpio_chipselect(struct spi_device *dev, int value)
-+{
-+ struct ubicom32_spi_gpio_controller_data *cd = (struct ubicom32_spi_gpio_controller_data *)dev->controller_data;
-+ unsigned int cs_polarity = dev->mode & SPI_CS_HIGH ? 1 : 0;
-+
-+ if (value == BITBANG_CS_ACTIVE) {
-+ gpio_set_value(cd->pin_cs, cs_polarity);
-+ return;
-+ }
-+ gpio_set_value(cd->pin_cs, !cs_polarity);
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_probe
-+ */
-+static int ubicom32_spi_gpio_probe(struct platform_device *dev)
-+{
-+ struct ubicom32_spi_gpio_platform_data *pdata;
-+ struct spi_master *master;
-+ struct ubicom32_spi_gpio *usg;
-+ int ret;
-+
-+ master = spi_alloc_master(&dev->dev, sizeof(struct ubicom32_spi_gpio));
-+ if (master == NULL) {
-+ dev_err(&dev->dev, "failed to allocate spi master\n");
-+ ret = -ENOMEM;
-+ goto err;
-+ }
-+
-+ usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(master);
-+
-+ platform_set_drvdata(dev, usg);
-+
-+ /*
-+ * Copy in the platform data
-+ */
-+ pdata = dev->dev.platform_data;
-+ usg->pdata = dev->dev.platform_data;
-+
-+ /*
-+ * Request the GPIO lines
-+ */
-+ ret = gpio_request(pdata->pin_mosi, "spi-mosi");
-+ if (ret) {
-+ dev_err(&dev->dev, "Failed to allocate spi-mosi GPIO\n");
-+ goto err;
-+ }
-+
-+ ret = gpio_request(pdata->pin_miso, "spi-miso");
-+ if (ret) {
-+ dev_err(&dev->dev, "Failed to allocate spi-miso GPIO\n");
-+ goto err_nomiso;
-+ }
-+
-+ ret = gpio_request(pdata->pin_clk, "spi-clk");
-+ if (ret) {
-+ dev_err(&dev->dev, "Failed to allocate spi-clk GPIO\n");
-+ goto err_noclk;
-+ }
-+
-+ /*
-+ * Setup spi-bitbang adaptor
-+ */
-+ usg->bitbang.flags |= SPI_CS_HIGH;
-+ usg->bitbang.master = spi_master_get(master);
-+ usg->bitbang.master->bus_num = pdata->bus_num;
-+ usg->bitbang.master->num_chipselect = pdata->num_chipselect;
-+ usg->bitbang.chipselect = ubicom32_spi_gpio_chipselect;
-+
-+ usg->bitbang.txrx_word[SPI_MODE_0] = ubicom32_spi_gpio_txrx_mode0;
-+ usg->bitbang.txrx_word[SPI_MODE_1] = ubicom32_spi_gpio_txrx_mode1;
-+ usg->bitbang.txrx_word[SPI_MODE_2] = ubicom32_spi_gpio_txrx_mode2;
-+ usg->bitbang.txrx_word[SPI_MODE_3] = ubicom32_spi_gpio_txrx_mode3;
-+
-+ /*
-+ * Setup the GPIO pins
-+ */
-+ gpio_direction_output(pdata->pin_clk, pdata->clk_default);
-+ gpio_direction_output(pdata->pin_mosi, 0);
-+ gpio_direction_input(pdata->pin_miso);
-+
-+ /*
-+ * Ready to go
-+ */
-+ ret = spi_bitbang_start(&usg->bitbang);
-+ if (ret) {
-+ goto err_no_bitbang;
-+ }
-+
-+ return 0;
-+
-+err_no_bitbang:
-+ spi_master_put(usg->bitbang.master);
-+
-+ gpio_free(pdata->pin_clk);
-+
-+err_noclk:
-+ gpio_free(pdata->pin_miso);
-+
-+err_nomiso:
-+ gpio_free(pdata->pin_mosi);
-+
-+err:
-+ return ret;
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_remove
-+ */
-+static int ubicom32_spi_gpio_remove(struct platform_device *dev)
-+{
-+ struct ubicom32_spi_gpio *sp = platform_get_drvdata(dev);
-+
-+ spi_bitbang_stop(&sp->bitbang);
-+ spi_master_put(sp->bitbang.master);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Work with hotplug and coldplug
-+ */
-+MODULE_ALIAS("platform:ubicom32_spi_gpio");
-+
-+static struct platform_driver ubicom32_spi_gpio_drv = {
-+ .probe = ubicom32_spi_gpio_probe,
-+ .remove = ubicom32_spi_gpio_remove,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*
-+ * ubicom32_spi_gpio_init
-+ */
-+static int __init ubicom32_spi_gpio_init(void)
-+{
-+ return platform_driver_register(&ubicom32_spi_gpio_drv);
-+}
-+
-+/*
-+ * ubicom32_spi_gpio_exit
-+ */
-+static void __exit ubicom32_spi_gpio_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32_spi_gpio_drv);
-+}
-+
-+module_init(ubicom32_spi_gpio_init);
-+module_exit(ubicom32_spi_gpio_exit);
-+
-+MODULE_DESCRIPTION("Ubicom32 SPI-GPIO Driver");
-+MODULE_AUTHOR("Pat Tjin, <@ubicom.com>");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/drivers/uio/Kconfig linux-2.6.30.10-ubi/drivers/uio/Kconfig
---- linux-2.6.30.10/drivers/uio/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/uio/Kconfig 2009-12-11 11:45:20.000000000 +0200
-@@ -89,4 +89,12 @@
-
- If you compile this as a module, it will be called uio_sercos3.
-
-+config UIO_UBICOM32RING
-+ tristate "Ubicom32 Ring Buffer driver"
-+ default n
-+ help
-+ Userspace I/O interface for a Ubicom32 Ring Buffer.
-+
-+ If you compile this as a module, it will be called uio_ubicom32ring
-+
- endif
-diff -ruN linux-2.6.30.10/drivers/uio/Makefile linux-2.6.30.10-ubi/drivers/uio/Makefile
---- linux-2.6.30.10/drivers/uio/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/uio/Makefile 2009-12-11 11:45:20.000000000 +0200
-@@ -5,3 +5,4 @@
- obj-$(CONFIG_UIO_SMX) += uio_smx.o
- obj-$(CONFIG_UIO_AEC) += uio_aec.o
- obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
-+obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
-diff -ruN linux-2.6.30.10/drivers/uio/uio_ubicom32ring.c linux-2.6.30.10-ubi/drivers/uio/uio_ubicom32ring.c
---- linux-2.6.30.10/drivers/uio/uio_ubicom32ring.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/uio/uio_ubicom32ring.c 2009-12-11 11:45:20.000000000 +0200
-@@ -0,0 +1,288 @@
-+/*
-+ * drivers/uio/uio_ubicom32ring.c
-+ *
-+ * Userspace I/O platform driver for Ubicom32 ring buffers
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * Based on uio_ubicom32ring.c by Magnus Damm
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/uio_driver.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/interrupt.h>
-+#include <linux/stringify.h>
-+
-+#include <asm/ip5000.h>
-+#include <asm/ubicom32ring.h>
-+
-+#define DRIVER_NAME "uio_ubicom32ring"
-+
-+struct uio_ubicom32ring_data {
-+ struct uio_info *uioinfo;
-+
-+ struct uio_ubicom32ring_regs *regs;
-+
-+ /*
-+ * IRQ used to kick the ring buffer
-+ */
-+ int irq_tx;
-+ int irq_rx;
-+
-+ spinlock_t lock;
-+
-+ unsigned long flags;
-+
-+ char name[0];
-+};
-+
-+static irqreturn_t uio_ubicom32ring_handler(int irq, struct uio_info *dev_info)
-+{
-+ struct uio_ubicom32ring_data *priv = dev_info->priv;
-+
-+ /* Just disable the interrupt in the interrupt controller, and
-+ * remember the state so we can allow user space to enable it later.
-+ */
-+
-+ if (!test_and_set_bit(0, &priv->flags))
-+ disable_irq_nosync(irq);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int uio_ubicom32ring_irqcontrol(struct uio_info *dev_info, s32 irq_on)
-+{
-+ struct uio_ubicom32ring_data *priv = dev_info->priv;
-+ unsigned long flags;
-+
-+ /* Allow user space to enable and disable the interrupt
-+ * in the interrupt controller, but keep track of the
-+ * state to prevent per-irq depth damage.
-+ *
-+ * Serialize this operation to support multiple tasks.
-+ */
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+
-+ if (irq_on & 2) {
-+ /*
-+ * Kick the ring buffer (if we can)
-+ */
-+ if (priv->irq_tx != 0xFF) {
-+ ubicom32_set_interrupt(priv->irq_tx);
-+ }
-+ }
-+
-+ if (priv->irq_rx != 0xFF) {
-+ if (irq_on & 1) {
-+ if (test_and_clear_bit(0, &priv->flags))
-+ enable_irq(dev_info->irq);
-+ } else {
-+ if (!test_and_set_bit(0, &priv->flags))
-+ disable_irq(dev_info->irq);
-+ }
-+ }
-+
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int uio_ubicom32ring_probe(struct platform_device *pdev)
-+{
-+ struct uio_info *uioinfo;
-+ struct uio_mem *uiomem;
-+ struct uio_ubicom32ring_data *priv;
-+ struct uio_ubicom32ring_regs *regs;
-+ struct resource *mem_resource;
-+ struct resource *irqtx_resource;
-+ struct resource *irqrx_resource;
-+ int ret = -EINVAL;
-+ int i;
-+
-+ uioinfo = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
-+ if (!uioinfo) {
-+ dev_err(&pdev->dev, "unable to kmalloc\n");
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Allocate private data with some string space after
-+ */
-+ i = sizeof(DRIVER_NAME) + 1;
-+ i += pdev->dev.platform_data ? strlen(pdev->dev.platform_data) : 0;
-+ priv = kzalloc(sizeof(struct uio_ubicom32ring_data) + i, GFP_KERNEL);
-+ if (!priv) {
-+ dev_err(&pdev->dev, "unable to kmalloc\n");
-+ kfree(uioinfo);
-+ return -ENOMEM;
-+ }
-+
-+ strcpy(priv->name, DRIVER_NAME ":");
-+ if (pdev->dev.platform_data) {
-+ strcat(priv->name, pdev->dev.platform_data);
-+ }
-+ uioinfo->priv = priv;
-+ uioinfo->name = priv->name;
-+ uioinfo->version = "0.1";
-+
-+ priv->uioinfo = uioinfo;
-+ spin_lock_init(&priv->lock);
-+ priv->flags = 0; /* interrupt is enabled to begin with */
-+
-+ /*
-+ * Get our resources, the IRQ_TX and IRQ_RX are optional.
-+ */
-+ priv->irq_tx = 0xFF;
-+ irqtx_resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (irqtx_resource) {
-+ priv->irq_tx = irqtx_resource->start;
-+ }
-+
-+ uioinfo->irq = -1;
-+ priv->irq_rx = 0xFF;
-+ irqrx_resource = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-+ if (irqrx_resource) {
-+ priv->irq_rx = irqrx_resource->start;
-+ uioinfo->irq = priv->irq_rx;
-+ uioinfo->handler = uio_ubicom32ring_handler;
-+ }
-+
-+ mem_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!mem_resource || !mem_resource->start) {
-+ dev_err(&pdev->dev, "No valid memory resource found\n");
-+ ret = -ENODEV;
-+ goto fail;
-+ }
-+ regs = (struct uio_ubicom32ring_regs *)mem_resource->start;
-+ priv->regs = regs;
-+
-+ if (regs->version != UIO_UBICOM32RING_REG_VERSION) {
-+ dev_err(&pdev->dev, "version %d not supported\n", regs->version);
-+ ret = -ENODEV;
-+ goto fail;
-+ }
-+
-+ /*
-+ * First range is the shared register space, if we have any
-+ */
-+ uiomem = &uioinfo->mem[0];
-+ if (regs->regs_size) {
-+ uiomem->memtype = UIO_MEM_PHYS;
-+ uiomem->addr = (u32_t)regs->regs;
-+ uiomem->size = regs->regs_size;
-+ ++uiomem;
-+ dev_info(&pdev->dev, "regs:%p (%u) / rings: %d found\n", regs->regs, regs->regs_size, regs->num_rings);
-+ } else {
-+ dev_info(&pdev->dev, "rings: %d found\n", regs->num_rings);
-+ }
-+
-+ /*
-+ * The rest of the range correspond to the rings
-+ */
-+ for (i = 0; i < regs->num_rings; i++) {
-+ dev_info(&pdev->dev, "\t%d: entries:%d ring:%p\n",
-+ i, regs->rings[i]->entries, &(regs->rings[i]->ring));
-+ if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
-+ dev_warn(&pdev->dev, "device has more than "
-+ __stringify(MAX_UIO_MAPS)
-+ " I/O memory resources.\n");
-+ break;
-+ }
-+
-+ uiomem->memtype = UIO_MEM_PHYS;
-+ uiomem->addr = (u32_t)&(regs->rings[i]->head);
-+ uiomem->size = (regs->rings[i]->entries * sizeof(u32_t)) +
-+ sizeof(struct uio_ubicom32ring_desc);
-+ ++uiomem;
-+ }
-+
-+ while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
-+ uiomem->size = 0;
-+ ++uiomem;
-+ }
-+
-+ /* This driver requires no hardware specific kernel code to handle
-+ * interrupts. Instead, the interrupt handler simply disables the
-+ * interrupt in the interrupt controller. User space is responsible
-+ * for performing hardware specific acknowledge and re-enabling of
-+ * the interrupt in the interrupt controller.
-+ *
-+ * Interrupt sharing is not supported.
-+ */
-+ uioinfo->irq_flags = IRQF_DISABLED;
-+ uioinfo->irqcontrol = uio_ubicom32ring_irqcontrol;
-+
-+ ret = uio_register_device(&pdev->dev, priv->uioinfo);
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to register uio device\n");
-+ goto fail;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ dev_info(&pdev->dev, "'%s' using irq: rx %d tx %d, regs %p\n",
-+ priv->name, priv->irq_rx, priv->irq_tx, priv->regs);
-+
-+ return 0;
-+
-+fail:
-+ kfree(uioinfo);
-+ kfree(priv);
-+ return ret;
-+}
-+
-+static int uio_ubicom32ring_remove(struct platform_device *pdev)
-+{
-+ struct uio_ubicom32ring_data *priv = platform_get_drvdata(pdev);
-+
-+ uio_unregister_device(priv->uioinfo);
-+ kfree(priv->uioinfo);
-+ kfree(priv);
-+ return 0;
-+}
-+
-+static struct platform_driver uio_ubicom32ring = {
-+ .probe = uio_ubicom32ring_probe,
-+ .remove = uio_ubicom32ring_remove,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init uio_ubicom32ring_init(void)
-+{
-+ return platform_driver_register(&uio_ubicom32ring);
-+}
-+
-+static void __exit uio_ubicom32ring_exit(void)
-+{
-+ platform_driver_unregister(&uio_ubicom32ring);
-+}
-+
-+module_init(uio_ubicom32ring_init);
-+module_exit(uio_ubicom32ring_exit);
-+
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("Userspace I/O driver for Ubicom32 ring buffers");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-diff -ruN linux-2.6.30.10/drivers/usb/gadget/epautoconf.c linux-2.6.30.10-ubi/drivers/usb/gadget/epautoconf.c
---- linux-2.6.30.10/drivers/usb/gadget/epautoconf.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/gadget/epautoconf.c 2009-12-11 11:45:20.000000000 +0200
-@@ -154,6 +154,10 @@
- /* configure your hardware with enough buffering!! */
- }
- break;
-+
-+ case USB_ENDPOINT_XFER_BULK:
-+ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
-+ return 0;
- }
-
- /* MATCH!! */
-diff -ruN linux-2.6.30.10/drivers/usb/Kconfig linux-2.6.30.10-ubi/drivers/usb/Kconfig
---- linux-2.6.30.10/drivers/usb/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/Kconfig 2009-12-11 11:45:20.000000000 +0200
-@@ -22,6 +22,7 @@
- default y if PCMCIA && !M32R # sl811_cs
- default y if ARM # SL-811
- default y if SUPERH # r8a66597-hcd
-+ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
- default PCI
-
- # many non-PCI SOC chips embed OHCI
-diff -ruN linux-2.6.30.10/drivers/usb/musb/Kconfig linux-2.6.30.10-ubi/drivers/usb/musb/Kconfig
---- linux-2.6.30.10/drivers/usb/musb/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/Kconfig 2009-12-11 11:45:20.000000000 +0200
-@@ -12,7 +12,7 @@
- depends on !SUPERH
- select TWL4030_USB if MACH_OMAP_3430SDP
- select USB_OTG_UTILS
-- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
-+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)'
- help
- Say Y here if your system has a dual role high speed USB
- controller based on the Mentor Graphics silicon IP. Then
-diff -ruN linux-2.6.30.10/drivers/usb/musb/Makefile linux-2.6.30.10-ubi/drivers/usb/musb/Makefile
---- linux-2.6.30.10/drivers/usb/musb/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/Makefile 2009-12-11 11:45:20.000000000 +0200
-@@ -30,6 +30,10 @@
- musb_hdrc-objs += blackfin.o
- endif
-
-+ifeq ($(CONFIG_UBICOM32), y)
-+ musb_hdrc-objs += ubi32_usb.o
-+endif
-+
- ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
- musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
- endif
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_core.c linux-2.6.30.10-ubi/drivers/usb/musb/musb_core.c
---- linux-2.6.30.10/drivers/usb/musb/musb_core.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_core.c 2009-12-11 11:45:20.000000000 +0200
-@@ -105,6 +105,13 @@
- #include <asm/mach-types.h>
- #endif
-
-+#ifdef CONFIG_UBICOM32
-+#include <asm/ip5000.h>
-+#include <asm/ubicom32-tio.h>
-+extern void ubi32_usb_init(void);
-+extern void ubi32_usb_int_clr(void);
-+#endif
-+
- #include "musb_core.h"
-
-
-@@ -147,8 +154,37 @@
- }
-
- /*-------------------------------------------------------------------------*/
-+#if defined(CONFIG_UBICOM32)
-+
-+/*
-+ * Load an endpoint's FIFO
-+ */
-+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
-+{
-+ void __iomem *fifo = hw_ep->fifo;
-+
-+ prefetch((u8 *)pSource);
-+
-+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-+ 'T', hw_ep->epnum, fifo, wCount, pSource);
-+
-+ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
-+
-+}
-+
-+/*
-+ * Unload an endpoint's FIFO
-+ */
-+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
-+{
-+
-+ void __iomem *fifo = hw_ep->fifo;
-+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-+ 'R', hw_ep->epnum, fifo, wCount, pDest);
-+ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
-+}
-
--#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
-+#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
-
- /*
- * Load an endpoint's FIFO
-@@ -227,8 +263,7 @@
- readsb(fifo, dst, len);
- }
- }
--
--#endif /* normal PIO */
-+#endif /* !T6010 && !BLACKFIN */
-
-
- /*-------------------------------------------------------------------------*/
-@@ -874,12 +909,19 @@
- musb_writeb(regs, MUSB_TESTMODE, 0);
-
- /* put into basic highspeed mode and start session */
-+#ifndef CONFIG_UBICOM32
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_SOFTCONN
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
-+#else
-+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
-+ /* ENSUSPEND wedges tusb */
-+ /* | MUSB_POWER_ENSUSPEND */
-+ );
-+#endif
-
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
-@@ -1081,6 +1123,7 @@
- };
-
-
-+#ifndef CONFIG_UBICOM32
- /*
- * configure a fifo; for non-shared endpoints, this may be called
- * once for a tx fifo and once for an rx fifo.
-@@ -1240,7 +1283,7 @@
-
- return 0;
- }
--
-+#endif /* CONFIG_UBICOM32 */
-
- /*
- * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
-@@ -1256,6 +1299,11 @@
- DBG(2, "<== static silicon ep config\n");
-
- /* FIXME pick up ep0 maxpacket size */
-+#ifdef CONFIG_UBICOM32
-+ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
-+ hw_ep = musb->endpoints;
-+ hw_ep->is_shared_fifo = true;
-+#endif
-
- for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
- musb_ep_select(mbase, epnum);
-@@ -1276,14 +1324,27 @@
- /* REVISIT: this algorithm is lazy, we should at least
- * try to pick a double buffered endpoint.
- */
-+#ifndef CONFIG_UBICOM32
- if (musb->bulk_ep)
- continue;
- musb->bulk_ep = hw_ep;
-+#else
-+ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
-+ continue;
-+ /* Save theEP with 1024 Bytes FIFO for ISO */
-+ if(hw_ep->max_packet_sz_tx == 512) {
-+ if (!musb->bulk_ep_in) {
-+ musb->bulk_ep_in = hw_ep;
-+ } else if (!musb->bulk_ep_out) {
-+ musb->bulk_ep_out = hw_ep;
-+ }
-+ }
-+#endif /* CONFIG_UBICOM32 */
- #endif
- }
-
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
-- if (!musb->bulk_ep) {
-+ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
- pr_debug("%s: missing bulk\n", musb_driver_name);
- return -EINVAL;
- }
-@@ -1393,12 +1454,16 @@
- musb->epmask = 1;
-
- if (reg & MUSB_CONFIGDATA_DYNFIFO) {
-+#ifndef CONFIG_UBICOM32
- if (musb->config->dyn_fifo)
- status = ep_config_from_table(musb);
-- else {
-+ else
-+#endif
-+ {
- ERR("reconfigure software for Dynamic FIFOs\n");
- status = -ENODEV;
- }
-+
- } else {
- if (!musb->config->dyn_fifo)
- status = ep_config_from_hw(musb);
-@@ -1462,8 +1527,8 @@
-
- /*-------------------------------------------------------------------------*/
-
--#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
--
-+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
-+static u32_t musb_int_count = 0;
- static irqreturn_t generic_interrupt(int irq, void *__hci)
- {
- unsigned long flags;
-@@ -1472,10 +1537,17 @@
-
- spin_lock_irqsave(&musb->lock, flags);
-
-+#ifndef CONFIG_UBICOM32
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-+#else
-+ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
-+ //ubi32_usb_int_clr();
-+ musb_int_count++;
-+#endif
-
-+ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
- if (musb->int_usb || musb->int_tx || musb->int_rx)
- retval = musb_interrupt(musb);
-
-@@ -2210,6 +2282,10 @@
-
- static int __init musb_init(void)
- {
-+#ifdef CONFIG_UBICOM32
-+ ubi32_usb_init();
-+#endif
-+
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (usb_disabled())
- return 0;
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_core.h linux-2.6.30.10-ubi/drivers/usb/musb/musb_core.h
---- linux-2.6.30.10/drivers/usb/musb/musb_core.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_core.h 2009-12-11 11:45:20.000000000 +0200
-@@ -326,7 +326,12 @@
- * queue until it completes or NAKs too much; then we try the next
- * endpoint.
- */
-+#ifdef CONFIG_UBICOM32
-+ struct musb_hw_ep *bulk_ep_in;
-+ struct musb_hw_ep *bulk_ep_out;
-+#else
- struct musb_hw_ep *bulk_ep;
-+#endif
-
- struct list_head control; /* of musb_qh */
- struct list_head in_bulk; /* of musb_qh */
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_gadget.c linux-2.6.30.10-ubi/drivers/usb/musb/musb_gadget.c
---- linux-2.6.30.10/drivers/usb/musb/musb_gadget.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_gadget.c 2009-12-11 11:45:20.000000000 +0200
-@@ -432,7 +432,7 @@
- * probably rates reporting as a host error
- */
- if (csr & MUSB_TXCSR_P_SENTSTALL) {
-- csr |= MUSB_TXCSR_P_WZC_BITS;
-+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
- csr &= ~MUSB_TXCSR_P_SENTSTALL;
- musb_writew(epio, MUSB_TXCSR, csr);
- if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-@@ -448,7 +448,7 @@
-
- if (csr & MUSB_TXCSR_P_UNDERRUN) {
- /* we NAKed, no big deal ... little reason to care */
-- csr |= MUSB_TXCSR_P_WZC_BITS;
-+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
- csr &= ~(MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
- musb_writew(epio, MUSB_TXCSR, csr);
-@@ -584,10 +584,16 @@
- u16 csr = 0;
- const u8 epnum = req->epnum;
- struct usb_request *request = &req->request;
-- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
-+ struct musb_ep *musb_ep = NULL;
- void __iomem *epio = musb->endpoints[epnum].regs;
-- unsigned fifo_count = 0;
-- u16 len = musb_ep->packet_sz;
-+ u16 fifo_count = 0;
-+ u16 len = 0;
-+
-+ if (musb->endpoints[epnum].is_shared_fifo)
-+ musb_ep = &musb->endpoints[epnum].ep_in;
-+ else
-+ musb_ep = &musb->endpoints[epnum].ep_out;
-+ len = musb_ep->packet_sz;
-
- csr = musb_readw(epio, MUSB_RXCSR);
-
-@@ -726,7 +732,7 @@
- */
-
- /* ack the read! */
-- csr |= MUSB_RXCSR_P_WZC_BITS;
-+ csr &= ~MUSB_RXCSR_P_WZC_BITS;
- csr &= ~MUSB_RXCSR_RXPKTRDY;
- musb_writew(epio, MUSB_RXCSR, csr);
- }
-@@ -745,10 +751,15 @@
- u16 csr;
- struct usb_request *request;
- void __iomem *mbase = musb->mregs;
-- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
-+ struct musb_ep *musb_ep = NULL;
- void __iomem *epio = musb->endpoints[epnum].regs;
- struct dma_channel *dma;
-
-+ if (musb->endpoints[epnum].is_shared_fifo)
-+ musb_ep = &musb->endpoints[epnum].ep_in;
-+ else
-+ musb_ep = &musb->endpoints[epnum].ep_out;
-+
- musb_ep_select(mbase, epnum);
-
- request = next_request(musb_ep);
-@@ -1769,7 +1780,9 @@
- }
- }
- }
--
-+#ifndef CONFIG_USB_MUSB_OTG
-+ musb_pullup(musb, 1);
-+#endif
- return retval;
- }
- EXPORT_SYMBOL(usb_gadget_register_driver);
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_gadget_ep0.c linux-2.6.30.10-ubi/drivers/usb/musb/musb_gadget_ep0.c
---- linux-2.6.30.10/drivers/usb/musb/musb_gadget_ep0.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_gadget_ep0.c 2009-12-11 11:45:20.000000000 +0200
-@@ -240,14 +240,14 @@
- case USB_REQ_SET_ADDRESS:
- /* change it after the status stage */
- musb->set_address = true;
-- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
-+ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
- handled = 1;
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- switch (recip) {
- case USB_RECIP_DEVICE:
-- if (ctrlrequest->wValue
-+ if (le16_to_cpu(ctrlrequest->wValue)
- != USB_DEVICE_REMOTE_WAKEUP)
- break;
- musb->may_wakeup = 0;
-@@ -261,8 +261,8 @@
-
- if (num == 0
- || num >= MUSB_C_NUM_EPS
-- || ctrlrequest->wValue
-- != USB_ENDPOINT_HALT)
-+ || le16_to_cpu(ctrlrequest->wValue
-+ != USB_ENDPOINT_HALT))
- break;
-
- if (ctrlrequest->wIndex & USB_DIR_IN)
-@@ -292,7 +292,7 @@
- switch (recip) {
- case USB_RECIP_DEVICE:
- handled = 1;
-- switch (ctrlrequest->wValue) {
-+ switch (le16_to_cpu(ctrlrequest->wValue)) {
- case USB_DEVICE_REMOTE_WAKEUP:
- musb->may_wakeup = 1;
- break;
-@@ -374,8 +374,8 @@
-
- if (epnum == 0
- || epnum >= MUSB_C_NUM_EPS
-- || ctrlrequest->wValue
-- != USB_ENDPOINT_HALT)
-+ || le16_to_cpu(ctrlrequest->wValue
-+ != USB_ENDPOINT_HALT))
- break;
-
- ep = musb->endpoints + epnum;
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_host.c linux-2.6.30.10-ubi/drivers/usb/musb/musb_host.c
---- linux-2.6.30.10/drivers/usb/musb/musb_host.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_host.c 2009-12-11 11:45:20.000000000 +0200
-@@ -160,7 +160,11 @@
- /* NOTE: no locks here; caller should lock and select EP */
- if (ep->epnum) {
- txcsr = musb_readw(ep->regs, MUSB_TXCSR);
-+#ifndef CONFIG_UBICOM32
- txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
-+#else
-+ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
-+#endif
- musb_writew(ep->regs, MUSB_TXCSR, txcsr);
- } else {
- txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
-@@ -223,6 +227,8 @@
- break;
- default: /* bulk, interrupt */
- /* actual_length may be nonzero on retry paths */
-+ if (urb->actual_length)
-+ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
- buf = urb->transfer_buffer + urb->actual_length;
- len = urb->transfer_buffer_length - urb->actual_length;
- }
-@@ -342,13 +348,13 @@
- if (!is_in) {
- csr = musb_readw(epio, MUSB_TXCSR);
- usb_settoggle(udev, qh->epnum, 1,
-- (csr & MUSB_TXCSR_H_DATATOGGLE)
-- ? 1 : 0);
-+ ((csr & MUSB_TXCSR_H_DATATOGGLE)
-+ ? 1 : 0));
- } else {
- csr = musb_readw(epio, MUSB_RXCSR);
- usb_settoggle(udev, qh->epnum, 0,
-- (csr & MUSB_RXCSR_H_DATATOGGLE)
-- ? 1 : 0);
-+ ((csr & MUSB_RXCSR_H_DATATOGGLE)
-+ ? 1 : 0));
- }
- }
-
-@@ -556,7 +562,11 @@
- musb_read_fifo(hw_ep, length, buf);
-
- csr = musb_readw(epio, MUSB_RXCSR);
-+#ifndef CONFIG_UBICOM32
- csr |= MUSB_RXCSR_H_WZC_BITS;
-+#else
-+ csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+#endif
- if (unlikely(do_flush))
- musb_h_flush_rxfifo(hw_ep, csr);
- else {
-@@ -590,6 +600,7 @@
-
- /* if programmed for Tx, put it in RX mode */
- if (ep->is_shared_fifo) {
-+#ifndef CONFIG_UBICOM32
- csr = musb_readw(ep->regs, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_MODE) {
- musb_h_tx_flush_fifo(ep);
-@@ -604,7 +615,18 @@
- */
- if (csr & MUSB_TXCSR_DMAMODE)
- musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
-+
-+#else
-+ /* clear mode (and everything else) to enable Rx */
- musb_writew(ep->regs, MUSB_TXCSR, 0);
-+ /* scrub all previous state, clearing toggle */
-+ csr = musb_readw(ep->regs, MUSB_RXCSR);
-+ if (csr & MUSB_RXCSR_RXPKTRDY)
-+ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
-+ musb_readw(ep->regs, MUSB_RXCOUNT));
-+
-+ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
-+#endif
-
- /* scrub all previous state, clearing toggle */
- } else {
-@@ -1138,8 +1160,18 @@
- void __iomem *mbase = musb->mregs;
- struct dma_channel *dma;
-
-+#ifdef CONFIG_UBICOM32
-+ if (hw_ep->is_shared_fifo) {
-+ qh = hw_ep->in_qh;
-+ }
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
-+ dma ? ", dma" : "");
-+#endif
-+#endif
- urb = next_urb(qh);
-
-+
- musb_ep_select(mbase, epnum);
- tx_csr = musb_readw(epio, MUSB_TXCSR);
-
-@@ -1180,9 +1212,14 @@
- * we have a candidate... NAKing is *NOT* an error
- */
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS
- | MUSB_TXCSR_TXPKTRDY);
-+#else
-+ musb_writew(epio, MUSB_TXCSR,
-+ MUSB_TXCSR_TXPKTRDY);
-+#endif
- return;
- }
-
-@@ -1353,8 +1390,14 @@
- qh->segsize = length;
-
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
-+ musb_writew(epio, MUSB_TXCSR,
-+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-+#else
- musb_writew(epio, MUSB_TXCSR,
-- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-+ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
-+#endif
-+
- }
-
-
-@@ -1414,7 +1457,11 @@
-
- /* clear nak timeout bit */
- rx_csr = musb_readw(epio, MUSB_RXCSR);
-+#ifndef CONFIG_UBICOM32
- rx_csr |= MUSB_RXCSR_H_WZC_BITS;
-+#else
-+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+#endif
- rx_csr &= ~MUSB_RXCSR_DATAERROR;
- musb_writew(epio, MUSB_RXCSR, rx_csr);
-
-@@ -1483,6 +1530,13 @@
-
- pipe = urb->pipe;
-
-+#ifdef CONFIG_UBICOM32
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
-+ xfer_len, dma ? ", dma" : "");
-+#endif
-+#endif
-+
- DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
- epnum, rx_csr, urb->actual_length,
- dma ? dma->actual_len : 0);
-@@ -1521,8 +1575,15 @@
- return;
- }
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- rx_csr |= MUSB_RXCSR_H_WZC_BITS;
- rx_csr &= ~MUSB_RXCSR_DATAERROR;
-+#else
-+ /* NEED TO EVALUATE CHANGE */
-+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
-+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
-+// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
-+#endif
- musb_writew(epio, MUSB_RXCSR, rx_csr);
-
- goto finish;
-@@ -1579,8 +1640,13 @@
- rx_csr &= ~MUSB_RXCSR_H_REQPKT;
-
- musb_ep_select(mbase, epnum);
-+#ifndef CONFIG_UBICOM32
- musb_writew(epio, MUSB_RXCSR,
- MUSB_RXCSR_H_WZC_BITS | rx_csr);
-+#else
-+ musb_writew(epio, MUSB_RXCSR,
-+ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
-+#endif
- }
- #endif
- if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
-@@ -1610,7 +1676,7 @@
- else
- done = false;
-
-- } else {
-+ } else {
- /* done if urb buffer is full or short packet is recd */
- done = (urb->actual_length + xfer_len >=
- urb->transfer_buffer_length
-@@ -1823,7 +1889,11 @@
- } else if (hw_ep->out_qh != NULL)
- continue;
-
-+#ifndef CONFIG_UBICOM32
- if (hw_ep == musb->bulk_ep)
-+#else
-+ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
-+#endif
- continue;
-
- if (is_in)
-@@ -1836,7 +1906,14 @@
- best_end = epnum;
- }
- }
-+
-+#ifdef CONFIG_UBICOM32
-+ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
-+ best_end = -1;
-+#endif
-+
- /* use bulk reserved ep1 if no other ep is free */
-+#ifndef CONFIG_UBICOM32
- if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
- hw_ep = musb->bulk_ep;
- if (is_in)
-@@ -1858,6 +1935,22 @@
- } else if (best_end < 0) {
- return -ENOSPC;
- }
-+#else
-+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
-+ /* hw_ep = musb->bulk_ep; */
-+ if (is_in) {
-+ head = &musb->in_bulk;
-+ hw_ep = musb->bulk_ep_in; /* UBICOM */
-+ }
-+ else {
-+ head = &musb->out_bulk;
-+ hw_ep = musb->bulk_ep_out; /* UBICOM */
-+ }
-+ goto success;
-+ } else if (best_end < 0) {
-+ return -ENOSPC;
-+ }
-+#endif
-
- idle = 1;
- qh->mux = 0;
-@@ -1869,6 +1962,13 @@
- list_add_tail(&qh->ring, head);
- qh->mux = 1;
- }
-+ /*
-+ * It's not make sense to set NAK timeout when qh->mux = 0,
-+ * There is nothing else to schedule
-+ */
-+ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
-+ qh->intv_reg = 0;
-+
- qh->hw_ep = hw_ep;
- qh->hep->hcpriv = qh;
- if (idle)
-@@ -1975,6 +2075,15 @@
- /* ISO always uses logarithmic encoding */
- interval = min_t(u8, epd->bInterval, 16);
- break;
-+#ifdef COMFIG_UBICOM32
-+ case USB_ENDPOINT_XFER_BULK:
-+ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-+ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
-+ else
-+ interval = 0;
-+ break;
-+#endif
-+
- default:
- /* REVISIT we actually want to use NAK limits, hinting to the
- * transfer scheduling logic to try some other qh, e.g. try
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_io.h linux-2.6.30.10-ubi/drivers/usb/musb/musb_io.h
---- linux-2.6.30.10/drivers/usb/musb/musb_io.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_io.h 2009-12-11 11:45:20.000000000 +0200
-@@ -58,6 +58,7 @@
-
- #ifndef CONFIG_BLACKFIN
-
-+#ifndef CONFIG_UBICOM32
- /* NOTE: these offsets are all in bytes */
-
- static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-@@ -72,7 +73,37 @@
-
- static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
- { __raw_writel(data, addr + offset); }
-+#else
-+#include <asm/ubicom32-tio.h>
-+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-+{
-+ u16 data;
-+ usb_tio_read_u16((u32)(addr + offset), &data);
-+ return data;
-+}
-
-+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
-+{
-+ u8 data;
-+ usb_tio_read_u8((u32)(addr + offset), &data);
-+ return data;
-+}
-+
-+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
-+{
-+ usb_tio_write_u16((u32)(addr + offset), data);
-+}
-+
-+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
-+{
-+ usb_tio_write_u8((u32)(addr + offset), data);
-+}
-+
-+static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
-+{
-+ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
-+}
-+#endif /* CONFIG_UBICOM32 */
-
- #ifdef CONFIG_USB_TUSB6010
-
-@@ -106,7 +137,7 @@
- __raw_writew(tmp, addr + (offset & ~1));
- }
-
--#else
-+#elif !defined(CONFIG_UBICOM32)
-
- static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
- { return __raw_readb(addr + offset); }
-diff -ruN linux-2.6.30.10/drivers/usb/musb/musb_regs.h linux-2.6.30.10-ubi/drivers/usb/musb/musb_regs.h
---- linux-2.6.30.10/drivers/usb/musb/musb_regs.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/musb_regs.h 2009-12-11 11:45:20.000000000 +0200
-@@ -167,6 +167,7 @@
- (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
- | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
-
-+
- /* RXCSR in Peripheral and Host mode */
- #define MUSB_RXCSR_AUTOCLEAR 0x8000
- #define MUSB_RXCSR_DMAENAB 0x2000
-diff -ruN linux-2.6.30.10/drivers/usb/musb/ubi32_usb.c linux-2.6.30.10-ubi/drivers/usb/musb/ubi32_usb.c
---- linux-2.6.30.10/drivers/usb/musb/ubi32_usb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/usb/musb/ubi32_usb.c 2009-12-11 11:45:20.000000000 +0200
-@@ -0,0 +1,156 @@
-+/*
-+ * drivers/usb/musb/ubi32_usb.c
-+ * Ubicom32 usb controller driver.
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ * Copyright (C) 2005-2006 by Texas Instruments
-+ *
-+ * Derived from the Texas Instruments Inventra Controller Driver for Linux.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+
-+#include <asm/io.h>
-+#include <asm/ip5000.h>
-+#include "musb_core.h"
-+
-+void musb_platform_enable(struct musb *musb)
-+{
-+}
-+void musb_platform_disable(struct musb *musb)
-+{
-+}
-+
-+int musb_platform_set_mode(struct musb *musb, u8 musb_mode) {
-+ return 0;
-+}
-+
-+static void ip5k_usb_hcd_vbus_power(struct musb *musb, int is_on, int sleeping)
-+{
-+}
-+
-+static void ip5k_usb_hcd_set_vbus(struct musb *musb, int is_on)
-+{
-+ u8 devctl;
-+ /* HDRC controls CPEN, but beware current surges during device
-+ * connect. They can trigger transient overcurrent conditions
-+ * that must be ignored.
-+ */
-+
-+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-+
-+ if (is_on) {
-+ musb->is_active = 1;
-+ musb->xceiv.default_a = 1;
-+ musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
-+ devctl |= MUSB_DEVCTL_SESSION;
-+
-+ MUSB_HST_MODE(musb);
-+ } else {
-+ musb->is_active = 0;
-+
-+ /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
-+ * jumping right to B_IDLE...
-+ */
-+
-+ musb->xceiv.default_a = 0;
-+ musb->xceiv.state = OTG_STATE_B_IDLE;
-+ devctl &= ~MUSB_DEVCTL_SESSION;
-+
-+ MUSB_DEV_MODE(musb);
-+ }
-+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
-+
-+ DBG(1, "VBUS %s, devctl %02x "
-+ /* otg %3x conf %08x prcm %08x */ "\n",
-+ otg_state_string(musb),
-+ musb_readb(musb->mregs, MUSB_DEVCTL));
-+}
-+static int ip5k_usb_hcd_set_power(struct otg_transceiver *x, unsigned mA)
-+{
-+ return 0;
-+}
-+
-+static int musb_platform_resume(struct musb *musb);
-+
-+int __init musb_platform_init(struct musb *musb)
-+{
-+
-+#ifdef CONFIG_UBICOM32_V4
-+ u32_t chip_id;
-+ asm volatile (
-+ "move.4 %0, CHIP_ID \n\t"
-+ : "=r" (chip_id)
-+ );
-+ if (chip_id == 0x30001) {
-+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 30);
-+ udelay(1);
-+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 31);
-+ } else {
-+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 17);
-+ udelay(1);
-+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 14);
-+ }
-+#endif
-+
-+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_CFG)) |= ((1 << 14) | (1 <<15));
-+
-+ /* The i-clk is AUTO gated. Hence there is no need
-+ * to disable it until the driver is shutdown */
-+
-+ clk_enable(musb->clock);
-+ musb_platform_resume(musb);
-+
-+ ip5k_usb_hcd_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
-+
-+ if (is_host_enabled(musb))
-+ musb->board_set_vbus = ip5k_usb_hcd_set_vbus;
-+ if (is_peripheral_enabled(musb))
-+ musb->xceiv.set_power = ip5k_usb_hcd_set_power;
-+
-+ return 0;
-+}
-+
-+
-+int musb_platform_suspend(struct musb *musb)
-+{
-+ return 0;
-+}
-+int musb_platform_resume(struct musb *musb)
-+{
-+ return 0;
-+}
-+
-+int musb_platform_exit(struct musb *musb)
-+{
-+ ip5k_usb_hcd_vbus_power(musb, 0 /*off*/, 1);
-+ musb_platform_suspend(musb);
-+ return 0;
-+}
-diff -ruN linux-2.6.30.10/drivers/video/backlight/Kconfig linux-2.6.30.10-ubi/drivers/video/backlight/Kconfig
---- linux-2.6.30.10/drivers/video/backlight/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/backlight/Kconfig 2009-12-11 11:45:20.000000000 +0200
-@@ -93,6 +93,63 @@
- If you have an HP Jornada 700 series handheld (710/720/728)
- say Y to enable LCD control driver.
-
-+config LCD_UBICOM32POWER
-+ tristate "Ubicom LCD power Driver"
-+ depends on LCD_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ If you have a Ubicom32 based system with an LCD panel that requires
-+ power control, say Y to enable the power control driver for it.
-+
-+config LCD_UBICOM32
-+ tristate "Ubicom Backlight Driver"
-+ depends on LCD_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ This driver takes care of initialization of LCD panels with
-+ built in controllers.
-+
-+menu "Ubicom32 LCD Panel Support"
-+ depends on UBICOM32 && LCD_UBICOM32
-+
-+config LCD_UBICOM32_TFT2N0369E_P
-+ bool "TFT2N0369E (Portrait)"
-+ default n
-+ help
-+ Support for TFT2N0369 in portrait mode
-+
-+config LCD_UBICOM32_TFT2N0369E_L
-+ bool "TFT2N0369E (Landscape)"
-+ default n
-+ help
-+ Support for TFT2N0369 in landscape mode
-+
-+config LCD_UBICOM32_CFAF240320KTTS
-+ bool "CFAF240320KTTS"
-+ default n
-+ help
-+ Support for CFAF240320KTTS
-+
-+config LCD_UBICOM32_CFAF240320KTTS_180
-+ bool "CFAF240320KTTS (180 rotation)"
-+ default n
-+ help
-+ Support for CFAF240320KTTS rotated 180 degrees
-+
-+config LCD_UBICOM32_CFAF240320D
-+ bool "CFAF240320D"
-+ default n
-+ help
-+ Support for CFAF240320D
-+
-+config LCD_UBICOM32_CFAF320240F
-+ bool "CFAF320240F"
-+ default n
-+ help
-+ Support for CFAF320240F
-+
-+endmenu
-+
- #
- # Backlight
- #
-@@ -229,3 +286,11 @@
- help
- If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
- backlight driver.
-+
-+config BACKLIGHT_UBICOM32
-+ tristate "Ubicom Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
-+ default n
-+ help
-+ If you have a Ubicom32 based system with a backlight say Y to enable the
-+ backlight driver.
-diff -ruN linux-2.6.30.10/drivers/video/backlight/Makefile linux-2.6.30.10-ubi/drivers/video/backlight/Makefile
---- linux-2.6.30.10/drivers/video/backlight/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/backlight/Makefile 2009-12-11 11:45:20.000000000 +0200
-@@ -9,6 +9,9 @@
- obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
- obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
- obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-+obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o
-+obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
-
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
-@@ -24,4 +27,4 @@
- obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
- obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
- obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
--
-+obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
-diff -ruN linux-2.6.30.10/drivers/video/backlight/ubicom32bl.c linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32bl.c
---- linux-2.6.30.10/drivers/video/backlight/ubicom32bl.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32bl.c 2009-12-11 11:45:20.000000000 +0200
-@@ -0,0 +1,399 @@
-+/*
-+ * drivers/video/backlight/ubicom32bl.c
-+ * Backlight driver for the Ubicom32 platform
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/backlight.h>
-+#include <linux/fb.h>
-+
-+#include <asm/ubicom32bl.h>
-+#include <asm/ip5000.h>
-+
-+#define DRIVER_NAME "ubicom32bl"
-+#define UBICOM32BL_MAX_BRIGHTNESS 255
-+
-+struct ubicom32bl_data {
-+ /*
-+ * Pointer to the platform data structure. Keep this around since we need values
-+ * from it to set the backlight intensity.
-+ */
-+ const struct ubicom32bl_platform_data *pdata;
-+
-+ /*
-+ * Backlight device, we have to save this for use when we remove ourselves.
-+ */
-+ struct backlight_device *bldev;
-+
-+ /*
-+ * Current intensity, used for get_intensity.
-+ */
-+ int cur_intensity;
-+
-+ /*
-+ * Init function for PWM
-+ */
-+ int (*init_fn)(struct ubicom32bl_data *);
-+
-+ /*
-+ * Set intensity function depending on the backlight type
-+ */
-+ int (*set_intensity_fn)(struct ubicom32bl_data *, int);
-+};
-+
-+/*
-+ * ubicom32bl_set_intensity_gpio
-+ */
-+static int ubicom32bl_set_intensity_gpio(struct ubicom32bl_data *ud, int intensity)
-+{
-+ ud->cur_intensity = intensity ? 255 : 0;
-+
-+ if (intensity) {
-+ // set gpio
-+ return 0;
-+ }
-+
-+ // clear gpio
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32bl_set_intensity_hw
-+ */
-+static int ubicom32bl_set_intensity_hw(struct ubicom32bl_data *ud, int intensity)
-+{
-+ u16_t period = ud->pdata->pwm_period;
-+ u16_t duty;
-+
-+ /*
-+ * Calculate the new duty cycle
-+ */
-+ duty = (period * intensity) / (UBICOM32BL_MAX_BRIGHTNESS + 1);
-+
-+ /*
-+ * Set the new duty cycle
-+ */
-+ switch (ud->pdata->pwm_channel) {
-+ case 0:
-+ /*
-+ * Channel 0 is in the lower half of PORT C ctl0 and ctl1
-+ */
-+ UBICOM32_IO_PORT(RC)->ctl1 = (ud->pdata->pwm_period << 16) | duty;
-+ break;
-+
-+ case 1:
-+ /*
-+ * Channel 1 is in the upper half of PORT C ctl0 and ctl2
-+ */
-+ UBICOM32_IO_PORT(RC)->ctl2 = (ud->pdata->pwm_period << 16) | duty;
-+ break;
-+
-+ case 2:
-+ /*
-+ * Channel 2 is in PORT H ctl0 and ctl1
-+ */
-+ UBICOM32_IO_PORT(RH)->ctl1 = (ud->pdata->pwm_period << 16) | duty;
-+ break;
-+ }
-+
-+ ud->cur_intensity = intensity;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32bl_set_intensity
-+ */
-+static int ubicom32bl_set_intensity(struct backlight_device *bd)
-+{
-+ struct ubicom32bl_data *ud = (struct ubicom32bl_data *)bl_get_data(bd);
-+ int intensity = bd->props.brightness;
-+
-+ /*
-+ * If we're blanked the the intensity doesn't matter.
-+ */
-+ if ((bd->props.power != FB_BLANK_UNBLANK) || (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
-+ intensity = 0;
-+ }
-+
-+ /*
-+ * Check for inverted backlight.
-+ */
-+ if (ud->pdata->invert) {
-+ intensity = UBICOM32BL_MAX_BRIGHTNESS - intensity;
-+ }
-+
-+ if (ud->set_intensity_fn) {
-+ return ud->set_intensity_fn(ud, intensity);
-+ }
-+
-+ return -ENXIO;
-+}
-+
-+/*
-+ * ubicom32bl_get_intensity
-+ * Return the current intensity of the backlight.
-+ */
-+static int ubicom32bl_get_intensity(struct backlight_device *bd)
-+{
-+ struct ubicom32bl_data *ud = (struct ubicom32bl_data *)bl_get_data(bd);
-+
-+ return ud->cur_intensity;
-+}
-+
-+/*
-+ * ubicom32bl_init_hw_pwm
-+ * Set the appropriate PWM registers
-+ */
-+static int ubicom32bl_init_hw_pwm(struct ubicom32bl_data *ud)
-+{
-+ /*
-+ * bit 13: enable
-+ */
-+ u16_t pwm_cfg = (1 << 13) | (ud->pdata->pwm_prescale << 8) ;
-+
-+ switch (ud->pdata->pwm_channel) {
-+ case 0:
-+ /*
-+ * Channel 0 is in the lower half of PORT C ctl0 and ctl1 (PA5)
-+ */
-+ UBICOM32_IO_PORT(RC)->ctl0 &= ~0xFFFF;
-+ UBICOM32_IO_PORT(RC)->ctl0 |= pwm_cfg;
-+ UBICOM32_IO_PORT(RC)->ctl1 = ud->pdata->pwm_period << 16;
-+
-+ /*
-+ * If the port function is not set, set it to GPIO/PWM
-+ */
-+ if (!UBICOM32_IO_PORT(RA)->function) {
-+ UBICOM32_IO_PORT(RA)->function = 3;
-+ }
-+ break;
-+
-+ case 1:
-+ /*
-+ * Channel 1 is in the upper half of PORT C ctl0 and ctl2 (PE4)
-+ */
-+ UBICOM32_IO_PORT(RC)->ctl0 &= ~0xFFFF0000;
-+ UBICOM32_IO_PORT(RC)->ctl0 |= (pwm_cfg << 16);
-+ UBICOM32_IO_PORT(RC)->ctl2 = ud->pdata->pwm_period << 16;
-+
-+ /*
-+ * If the port function is not set, set it to GPIO/ExtIOInt
-+ */
-+ if (!UBICOM32_IO_PORT(RE)->function) {
-+ UBICOM32_IO_PORT(RE)->function = 3;
-+ }
-+ break;
-+
-+ case 2:
-+ /*
-+ * Channel 2 is in PORT H ctl0 and ctl1 (PD0)
-+ */
-+ UBICOM32_IO_PORT(RH)->ctl0 &= ~0xFFFF0000;
-+ UBICOM32_IO_PORT(RH)->ctl0 = pwm_cfg;
-+ UBICOM32_IO_PORT(RH)->ctl1 = ud->pdata->pwm_period << 16;
-+
-+ /*
-+ * If the port function is not set, set it to GPIO
-+ */
-+ if (!UBICOM32_IO_PORT(RD)->function) {
-+ UBICOM32_IO_PORT(RD)->function = 3;
-+ }
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32bl_init_gpio
-+ * Allocate the appropriate GPIO
-+ */
-+static int ubicom32bl_init_gpio(struct ubicom32bl_data *ud)
-+{
-+ return 0;
-+}
-+
-+static struct backlight_ops ubicom32bl_ops = {
-+ .get_brightness = ubicom32bl_get_intensity,
-+ .update_status = ubicom32bl_set_intensity,
-+};
-+
-+/*
-+ * ubicom32bl_probe
-+ */
-+static int ubicom32bl_probe(struct platform_device *pdev)
-+{
-+ const struct ubicom32bl_platform_data *pdata = pdev->dev.platform_data;
-+ struct ubicom32bl_data *ud;
-+ struct backlight_device *bldev;
-+ int retval;
-+
-+ /*
-+ * Check to see if we have any platform data, if we don't then the backlight is not
-+ * configured on this device.
-+ */
-+ if (!pdata) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Allocate our private data
-+ */
-+ ud = kzalloc(sizeof(struct ubicom32bl_data), GFP_KERNEL);
-+ if (!ud) {
-+ return -ENOMEM;
-+ }
-+
-+ ud->pdata = pdata;
-+
-+ /*
-+ * Check to see that the platform data is valid for this driver
-+ */
-+ switch (pdata->type) {
-+ case UBICOM32BL_TYPE_PWM:
-+ {
-+ /*
-+ * Make sure we have a PWM peripheral
-+ */
-+ u32_t chipid;
-+ asm volatile (
-+ "move.4 %0, CHIP_ID \n\t"
-+ : "=r" (chipid)
-+ );
-+ if (chipid != 0x00030001) {
-+ retval = -ENODEV;
-+ goto fail;
-+ }
-+
-+ if (pdata->pwm_channel > 3) {
-+ retval = -ENODEV;
-+ goto fail;
-+ }
-+ if (pdata->pwm_prescale > 16) {
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ ud->init_fn = ubicom32bl_init_hw_pwm;
-+ ud->set_intensity_fn = ubicom32bl_set_intensity_hw;
-+ break;
-+ }
-+
-+ case UBICOM32BL_TYPE_PWM_HRT:
-+ // For now, PWM HRT devices are treated as binary lights.
-+
-+ case UBICOM32BL_TYPE_BINARY:
-+ ud->init_fn = ubicom32bl_init_gpio;
-+ ud->set_intensity_fn = ubicom32bl_set_intensity_gpio;
-+ break;
-+ }
-+
-+ /*
-+ * Register our backlight device
-+ */
-+ bldev = backlight_device_register(DRIVER_NAME, &pdev->dev, ud, &ubicom32bl_ops);
-+ if (IS_ERR(bldev)) {
-+ retval = PTR_ERR(bldev);
-+ goto fail;
-+ }
-+
-+ ud->bldev = bldev;
-+ ud->cur_intensity = pdata->default_intensity;
-+ platform_set_drvdata(pdev, ud);
-+
-+ /*
-+ * Start up the backlight at the prescribed default intensity
-+ */
-+ bldev->props.power = FB_BLANK_UNBLANK;
-+ bldev->props.max_brightness = UBICOM32BL_MAX_BRIGHTNESS;
-+ bldev->props.brightness = pdata->default_intensity;
-+
-+ if (ud->init_fn) {
-+ if (ud->init_fn(ud) != 0) {
-+ retval = -ENODEV;
-+ backlight_device_unregister(ud->bldev);
-+ goto fail;
-+ }
-+ }
-+ ubicom32bl_set_intensity(bldev);
-+
-+ printk(KERN_INFO DRIVER_NAME ": Backlight driver started\n");
-+
-+ return 0;
-+
-+fail:
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(ud);
-+ return retval;
-+}
-+
-+/*
-+ * ubicom32bl_remove
-+ */
-+static int __exit ubicom32bl_remove(struct platform_device *pdev)
-+{
-+ struct ubicom32bl_data *ud = platform_get_drvdata(pdev);
-+
-+ backlight_device_unregister(ud->bldev);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(ud);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubicom32bl_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .remove = __exit_p(ubicom32bl_remove),
-+};
-+
-+/*
-+ * ubicom32bl_init
-+ */
-+static int __init ubicom32bl_init(void)
-+{
-+ return platform_driver_probe(&ubicom32bl_driver, ubicom32bl_probe);
-+}
-+module_init(ubicom32bl_init);
-+
-+/*
-+ * ubicom32bl_exit
-+ */
-+static void __exit ubicom32bl_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32bl_driver);
-+}
-+module_exit(ubicom32bl_exit);
-+
-+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom32 backlight driver");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/drivers/video/backlight/ubicom32lcd.c linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32lcd.c
---- linux-2.6.30.10/drivers/video/backlight/ubicom32lcd.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32lcd.c 2009-12-11 11:45:20.000000000 +0200
-@@ -0,0 +1,372 @@
-+/*
-+ * drivers/video/ubicom32lcd.c
-+ * LCD initilization code
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/ip5000.h>
-+#include <asm/gpio.h>
-+#include <asm/ubicom32lcd.h>
-+
-+#include "ubicom32lcd.h"
-+
-+#define DRIVER_NAME "ubicom32lcd"
-+
-+struct ubicom32lcd_data {
-+ const struct ubicom32lcd_panel *panel;
-+
-+ int pin_cs;
-+ int pin_rd;
-+ int pin_rs;
-+ int pin_wr;
-+ int pin_reset;
-+ struct ubicom32_io_port *port_data;
-+ int data_shift;
-+};
-+
-+/*
-+ * ubicom32lcd_write
-+ * Performs a write cycle on the bus (assumes CS asserted, RD & WR set)
-+ */
-+static void ubicom32lcd_write(struct ubicom32lcd_data *ud, int command, u16 data)
-+{
-+ if (command) {
-+ UBICOM32_GPIO_SET_PIN_LOW(ud->pin_rs);
-+ } else {
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-+ }
-+
-+ asm volatile (
-+ "or.4 4(%[port]), 4(%[port]), %[mask] \n\t"
-+ "not.4 %[mask], %[mask] \n\t"
-+ "and.4 8(%[port]), 8(%[port]), %[mask] \n\t"
-+ "or.4 8(%[port]), 8(%[port]), %[cmd] \n\t"
-+ :
-+ : [port] "a" (ud->port_data),
-+ [mask] "d" (0xFFFF << ud->data_shift),
-+ [cmd] "d" (data << ud->data_shift)
-+ : "cc"
-+ );
-+
-+ UBICOM32_GPIO_SET_PIN_LOW(ud->pin_wr);
-+
-+ //ndelay(50);
-+ udelay(1);
-+
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-+
-+ udelay(1);
-+ //ndelay(50);
-+}
-+
-+/*
-+ * ubicom32lcd_read_data
-+ * Performs a read cycle on the bus (assumes CS asserted, RD & WR set)
-+ */
-+static u16 ubicom32lcd_read_data(struct ubicom32lcd_data *ud)
-+{
-+ u32_t data;
-+
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-+
-+ asm volatile (
-+ "and.4 4(%[port]), 4(%[port]), %[mask]\n\t"
-+ :
-+ : [port] "a" (ud->port_data),
-+ [mask] "d" (~(0xFFFF << ud->data_shift))
-+ : "cc"
-+ );
-+
-+ UBICOM32_GPIO_SET_PIN_LOW(ud->pin_rd);
-+
-+ ndelay(300);
-+
-+ asm volatile (
-+ "lsr.4 %[data], 12(%[port]), %[shamt] \n\t"
-+ "and.4 %[data], %[data], %[mask] \n\t"
-+ : [data] "=d" (data)
-+ : [port] "a" (ud->port_data),
-+ [mask] "d" (0xFFFF),
-+ [shamt] "d" (ud->data_shift)
-+ : "cc"
-+ );
-+
-+ ndelay(200);
-+
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-+
-+ ndelay(500);
-+
-+ return data;
-+}
-+
-+/*
-+ * ubicom32lcd_execute
-+ * Executes a script for performing operations on the LCD (assumes CS set)
-+ */
-+static void ubicom32lcd_execute(struct ubicom32lcd_data *ud, const struct ubicom32lcd_step *script)
-+{
-+ while (1) {
-+ switch (script->op) {
-+ case LCD_STEP_CMD:
-+ ubicom32lcd_write(ud, 1, script->cmd);
-+ break;
-+
-+ case LCD_STEP_DATA:
-+ ubicom32lcd_write(ud, 0, script->data);
-+ break;
-+
-+ case LCD_STEP_CMD_DATA:
-+ ubicom32lcd_write(ud, 1, script->cmd);
-+ ubicom32lcd_write(ud, 0, script->data);
-+ break;
-+
-+ case LCD_STEP_SLEEP:
-+ udelay(script->data);
-+ break;
-+
-+ case LCD_STEP_DONE:
-+ return;
-+ }
-+ script++;
-+ }
-+}
-+
-+/*
-+ * ubicom32lcd_goto
-+ * Places the gram pointer at a specific X, Y address
-+ */
-+static void ubicom32lcd_goto(struct ubicom32lcd_data *ud, int x, int y)
-+{
-+ ubicom32lcd_write(ud, 1, ud->panel->horz_reg);
-+ ubicom32lcd_write(ud, 0, x);
-+ ubicom32lcd_write(ud, 1, ud->panel->vert_reg);
-+ ubicom32lcd_write(ud, 0, y);
-+ ubicom32lcd_write(ud, 1, ud->panel->gram_reg);
-+}
-+
-+/*
-+ * ubicom32lcd_panel_init
-+ * Initializes the lcd panel.
-+ */
-+static int ubicom32lcd_panel_init(struct ubicom32lcd_data *ud)
-+{
-+ u16 id;
-+
-+ UBICOM32_GPIO_SET_PIN_LOW(ud->pin_reset);
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_reset);
-+ UBICOM32_GPIO_ENABLE(ud->pin_reset);
-+
-+ asm volatile (
-+ "or.4 0x50(%[port]), 0x50(%[port]), %[mask] \n\t"
-+ "not.4 %[mask], %[mask] \n\t"
-+ "and.4 0x04(%[port]), 0x04(%[port]), %[mask] \n\t"
-+ :
-+ : [port] "a" (ud->port_data),
-+ [mask] "d" (0xFFFF << ud->data_shift)
-+ : "cc"
-+ );
-+
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-+
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_rs);
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_rd);
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_wr);
-+ UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_cs);
-+
-+ UBICOM32_GPIO_ENABLE(ud->pin_rs);
-+ UBICOM32_GPIO_ENABLE(ud->pin_rd);
-+ UBICOM32_GPIO_ENABLE(ud->pin_wr);
-+ UBICOM32_GPIO_ENABLE(ud->pin_cs);
-+
-+ udelay(20);
-+
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_reset);
-+
-+ udelay(20);
-+
-+ UBICOM32_GPIO_SET_PIN_LOW(ud->pin_cs);
-+
-+ id = ubicom32lcd_read_data(ud);
-+
-+ /*
-+ * We will try to figure out what kind of panel we have if we were not told.
-+ */
-+ if (!ud->panel) {
-+ const struct ubicom32lcd_panel **p = ubicom32lcd_panels;
-+ while (*p) {
-+ if ((*p)->id && ((*p)->id == id)) {
-+ break;
-+ }
-+ p++;
-+ }
-+ if (!*p) {
-+ printk(KERN_WARNING DRIVER_NAME ":Could not find compatible panel, id=%x\n", id);
-+ return -ENODEV;
-+ }
-+ ud->panel = *p;
-+ }
-+
-+ /*
-+ * Make sure panel ID matches if we were supplied a panel type
-+ */
-+ if (ud->panel->id && (ud->panel->id != id)) {
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-+
-+ return -ENODEV;
-+ }
-+
-+ ubicom32lcd_execute(ud, ud->panel->init_seq);
-+
-+ ubicom32lcd_goto(ud, 0, 0);
-+
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-+ UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-+
-+ printk(KERN_INFO DRIVER_NAME ": Initialized panel %s\n", ud->panel->desc);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32lcd_probe
-+ */
-+static int ubicom32lcd_probe(struct platform_device *pdev)
-+{
-+ const struct ubicom32lcd_platform_data *pdata = pdev->dev.platform_data;
-+ struct ubicom32lcd_data *ud;
-+ int retval;
-+
-+ /*
-+ * Allocate our private data
-+ */
-+ ud = kzalloc(sizeof(struct ubicom32lcd_data), GFP_KERNEL);
-+ if (!ud) {
-+ return -ENOMEM;
-+ }
-+
-+ if (pdata) {
-+ ud->pin_cs = pdata->pin_cs;
-+ ud->pin_rd = pdata->pin_rd;
-+ ud->pin_wr = pdata->pin_wr;
-+ ud->pin_rs = pdata->pin_rs;
-+ ud->pin_reset = pdata->pin_reset;
-+ ud->port_data = pdata->port_data;
-+ ud->data_shift = pdata->data_shift;
-+ } else {
-+ /*
-+ * Defaults
-+ */
-+ ud->pin_cs = GPIO_RD_4;
-+ ud->pin_rd = GPIO_RD_5;
-+ ud->pin_rs = GPIO_RD_3;
-+ ud->pin_wr = GPIO_RD_2;
-+ ud->pin_reset = GPIO_RD_7;
-+ ud->port_data = (struct ubicom32_io_port *)RI;
-+ ud->data_shift = 0;
-+ }
-+
-+ /*
-+ * Initialize the display
-+ */
-+ retval = ubicom32lcd_panel_init(ud);
-+ if (retval) {
-+ kfree(ud);
-+ return retval;
-+ }
-+
-+ printk(KERN_INFO DRIVER_NAME ": LCD initialized\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32lcd_remove
-+ */
-+static int __exit ubicom32lcd_remove(struct platform_device *pdev)
-+{
-+ struct ubicom32lcd_data *ud = platform_get_drvdata(pdev);
-+
-+ kfree(ud);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubicom32lcd_driver = {
-+ .probe = ubicom32lcd_probe,
-+ .remove = ubicom32lcd_remove,
-+
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .remove = __exit_p(ubicom32lcd_remove),
-+};
-+
-+static struct platform_device *ubicom32lcd_device;
-+
-+/*
-+ * ubicom32lcd_init
-+ */
-+static int __init ubicom32lcd_init(void)
-+{
-+ int res;
-+
-+ res = platform_driver_register(&ubicom32lcd_driver);
-+ if (res == 0) {
-+ ubicom32lcd_device = platform_device_alloc(DRIVER_NAME, 0);
-+ if (ubicom32lcd_device) {
-+ res = platform_device_add(ubicom32lcd_device);
-+ } else {
-+ res = -ENOMEM;
-+ }
-+ if (res) {
-+ platform_device_put(ubicom32lcd_device);
-+ platform_driver_unregister(&ubicom32lcd_driver);
-+ }
-+ }
-+ return res;
-+}
-+module_init(ubicom32lcd_init);
-+
-+/*
-+ * ubicom32lcd_exit
-+ */
-+static void __exit ubicom32lcd_exit(void)
-+{
-+ platform_device_unregister(ubicom32lcd_device);
-+ platform_driver_unregister(&ubicom32lcd_driver);
-+}
-+module_exit(ubicom32lcd_exit);
-+
-+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom32 LCD driver");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/drivers/video/backlight/ubicom32lcd.h linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32lcd.h
---- linux-2.6.30.10/drivers/video/backlight/ubicom32lcd.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32lcd.h 2009-12-11 11:45:20.000000000 +0200
-@@ -0,0 +1,546 @@
-+/*
-+ * ubicom32lcd.h
-+ * Ubicom32 lcd panel drivers
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * This Ubicom32 library is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This Ubicom32 library is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _UBICOM32LCD_H_
-+#define _UBICOM32LCD_H_
-+
-+enum ubicom32lcd_op {
-+ /*
-+ * Sleep for (data) ms
-+ */
-+ LCD_STEP_SLEEP,
-+
-+ /*
-+ * Execute write of command
-+ */
-+ LCD_STEP_CMD,
-+
-+ /*
-+ * Execute write of data
-+ */
-+ LCD_STEP_DATA,
-+
-+ /*
-+ * Execute write of command/data
-+ */
-+ LCD_STEP_CMD_DATA,
-+
-+ /*
-+ * Script done
-+ */
-+ LCD_STEP_DONE,
-+};
-+
-+struct ubicom32lcd_step {
-+ enum ubicom32lcd_op op;
-+ u16 cmd;
-+ u16 data;
-+};
-+
-+struct ubicom32lcd_panel {
-+ const struct ubicom32lcd_step *init_seq;
-+ const char *desc;
-+
-+ u32 xres;
-+ u32 yres;
-+ u32 stride;
-+ u32 flags;
-+
-+ u16 id;
-+ u16 horz_reg;
-+ u16 vert_reg;
-+ u16 gram_reg;
-+};
-+
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240320KTTS
-+static const struct ubicom32lcd_step cfaf240320ktts_init_0[] = {
-+ {LCD_STEP_CMD_DATA, 0x0001, 0x0000,}, // Driver Output Control Register (R01h) Page 14, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0002, 0x0700,}, // LCD Driving Waveform Control (R02h) Page 15, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0003, 0x50A0,}, // Entry Mode (R03h) 0 degrees
-+ {LCD_STEP_CMD_DATA, 0x0004, 0x0000,}, // Scaling Control register (R04h) Page 16, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0008, 0x0207,}, // Display Control 2 (R08h) Page 17, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0009, 0x0000,}, // Display Control 3 (R09h) Page 18, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000A, 0x0000,}, // Frame Cycle Control (R0Ah) Page 19, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000C, 0x0000,}, // External Display Interface Control 1 (R0Ch) Page 20, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000D, 0x0000,}, // Frame Maker Position (R0Dh) Page 21, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000F, 0x0000,}, // External Display Interface Control 2 (R0Fh) Page 21, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x0000,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0012, 0x0000,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0013, 0x0000,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
-+ {LCD_STEP_SLEEP, 0, 200},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0101,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x12B0,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0012, 0x01BB,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0013, 0x1300,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0029, 0x0010,}, // NVM read data 2 (R29h) Page 30, SPFD5408B Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0030, 0x000A,}, // Gamma Control 1 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0031, 0x1326,}, // Gamma Control 2 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0032, 0x0A29,}, // Gamma Control 3 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0033, 0x290A,}, // Gamma Control 4 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0034, 0x2613,}, // Gamma Control 5 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0035, 0x0A0A,}, // Gamma Control 6 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0036, 0x1E03,}, // Gamma Control 7 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0037, 0x031E,}, // Gamma Control 8 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0038, 0x0706,}, // Gamma Control 9 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0039, 0x0303,}, // Gamma Control 10 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003A, 0x0E04,}, // Gamma Control 11 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003B, 0x0E01,}, // Gamma Control 12 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003C, 0x010E,}, // Gamma Control 13 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003D, 0x040E,}, // Gamma Control 14 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003E, 0x0303,}, // Gamma Control 15 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003F, 0x0607,}, // Gamma Control 16 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0050, 0x0000,}, // Window Horizontal RAM Address Start (R50h) Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0051, 0x00EF,}, // Window Horizontal RAM Address End (R51h) Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0052, 0x0000,}, // Window Vertical RAM Address Start (R52h) Page 33, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0053, 0x013F,}, // Window Vertical RAM Address End (R53h) Page 33, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0060, 0x2700,}, // Driver Output Control (R60h) Page 33, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0061, 0x0001,}, // Driver Output Control (R61h) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x006A, 0x0000,}, // Vertical Scroll Control (R6Ah) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0080, 0x0000,}, // Display Position - Partial Display 1 (R80h) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0081, 0x0000,}, // RAM Address Start - Partial Display 1 (R81h) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0082, 0x0000,}, // RAM Address End - Partial Display 1 (R82h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0083, 0x0000,}, // Display Position - Partial Display 2 (R83h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0084, 0x0000,}, // RAM Address Start - Partial Display 2 (R84h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0085, 0x0000,}, // RAM Address End - Partial Display 2 (R85h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0090, 0x0010,}, // Panel Interface Control 1 (R90h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0092, 0x0000,}, // Panel Interface Control 2 (R92h) Page 37, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0093, 0x0103,}, // Panel Interface control 3 (R93h) Page 38, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0095, 0x0210,}, // Panel Interface control 4 (R95h) Page 38, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0097, 0x0000,}, // Panel Interface Control 5 (R97h) Page 40, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0098, 0x0000,}, // Panel Interface Control 6 (R98h) Page 41, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0173,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
-+ {LCD_STEP_DONE, 0, 0},
-+};
-+
-+const struct ubicom32lcd_panel cfaf240320ktts_0 = {
-+ .desc = "CFAF240320KTTS",
-+ .init_seq = cfaf240320ktts_init_0,
-+ .horz_reg = 0x20,
-+ .vert_reg = 0x21,
-+ .gram_reg = 0x22,
-+ .xres = 240,
-+ .yres = 320,
-+ .stride = 240,
-+ .id = 0x5408,
-+};
-+#endif
-+
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240320KTTS_180
-+static const struct ubicom32lcd_step cfaf240320ktts_init_180[] = {
-+ {LCD_STEP_CMD_DATA, 0x0001, 0x0000,}, // Driver Output Control Register (R01h) Page 14, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0002, 0x0700,}, // LCD Driving Waveform Control (R02h) Page 15, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0003, 0x5000,}, // Entry Mode (R03h) 180 degrees
-+ {LCD_STEP_CMD_DATA, 0x0004, 0x0000,}, // Scaling Control register (R04h) Page 16, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0008, 0x0207,}, // Display Control 2 (R08h) Page 17, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0009, 0x0000,}, // Display Control 3 (R09h) Page 18, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000A, 0x0000,}, // Frame Cycle Control (R0Ah) Page 19, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000C, 0x0000,}, // External Display Interface Control 1 (R0Ch) Page 20, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000D, 0x0000,}, // Frame Maker Position (R0Dh) Page 21, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000F, 0x0000,}, // External Display Interface Control 2 (R0Fh) Page 21, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x0000,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0012, 0x0000,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0013, 0x0000,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
-+ {LCD_STEP_SLEEP, 0, 200},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0101,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x12B0,}, // Power Control 1 (R10h) Page 22, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x0007,}, // Power Control 2 (R11h) Page 23, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0012, 0x01BB,}, // Power Control 3 (R12h) Page 24, SPFD5408B Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0013, 0x1300,}, // Power Control 4 (R13h) Page 25, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0029, 0x0010,}, // NVM read data 2 (R29h) Page 30, SPFD5408B Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0030, 0x000A,}, // Gamma Control 1 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0031, 0x1326,}, // Gamma Control 2 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0032, 0x0A29,}, // Gamma Control 3 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0033, 0x290A,}, // Gamma Control 4 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0034, 0x2613,}, // Gamma Control 5 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0035, 0x0A0A,}, // Gamma Control 6 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0036, 0x1E03,}, // Gamma Control 7 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0037, 0x031E,}, // Gamma Control 8 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0038, 0x0706,}, // Gamma Control 9 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0039, 0x0303,}, // Gamma Control 10 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003A, 0x0E04,}, // Gamma Control 11 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003B, 0x0E01,}, // Gamma Control 12 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003C, 0x010E,}, // Gamma Control 13 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003D, 0x040E,}, // Gamma Control 14 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003E, 0x0303,}, // Gamma Control 15 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x003F, 0x0607,}, // Gamma Control 16 Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0050, 0x0000,}, // Window Horizontal RAM Address Start (R50h) Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0051, 0x00EF,}, // Window Horizontal RAM Address End (R51h) Page 32, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0052, 0x0000,}, // Window Vertical RAM Address Start (R52h) Page 33, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0053, 0x013F,}, // Window Vertical RAM Address End (R53h) Page 33, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0060, 0x2700,}, // Driver Output Control (R60h) Page 33, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0061, 0x0001,}, // Driver Output Control (R61h) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x006A, 0x0000,}, // Vertical Scroll Control (R6Ah) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0080, 0x0000,}, // Display Position - Partial Display 1 (R80h) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0081, 0x0000,}, // RAM Address Start - Partial Display 1 (R81h) Page 35, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0082, 0x0000,}, // RAM Address End - Partial Display 1 (R82h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0083, 0x0000,}, // Display Position - Partial Display 2 (R83h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0084, 0x0000,}, // RAM Address Start - Partial Display 2 (R84h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0085, 0x0000,}, // RAM Address End - Partial Display 2 (R85h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0090, 0x0010,}, // Panel Interface Control 1 (R90h) Page 36, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0092, 0x0000,}, // Panel Interface Control 2 (R92h) Page 37, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0093, 0x0103,}, // Panel Interface control 3 (R93h) Page 38, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0095, 0x0210,}, // Panel Interface control 4 (R95h) Page 38, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0097, 0x0000,}, // Panel Interface Control 5 (R97h) Page 40, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0098, 0x0000,}, // Panel Interface Control 6 (R98h) Page 41, SPFD5408B Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0173,}, // Display Control (R07h) Page 16, SPFD5408B Datasheet
-+ {LCD_STEP_DONE, 0, 0},
-+};
-+
-+const struct ubicom32lcd_panel cfaf240320ktts_180 = {
-+ .desc = "CFAF240320KTTS 180",
-+ .init_seq = cfaf240320ktts_init_180,
-+ .horz_reg = 0x20,
-+ .vert_reg = 0x21,
-+ .gram_reg = 0x22,
-+ .xres = 240,
-+ .yres = 320,
-+ .stride = 240,
-+ .id = 0x5408,
-+};
-+#endif
-+
-+#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_P
-+static const struct ubicom32lcd_step tft2n0369ep_init[] = {
-+ {LCD_STEP_CMD_DATA, 0x0028, 0x0006},
-+ {LCD_STEP_CMD_DATA, 0x0000, 0x0001},
-+ {LCD_STEP_SLEEP, 0, 15},
-+ {LCD_STEP_CMD_DATA, 0x002B, 0x9532},
-+ {LCD_STEP_CMD_DATA, 0x0003, 0xAAAC},
-+ {LCD_STEP_CMD_DATA, 0x000C, 0x0002},
-+ {LCD_STEP_CMD_DATA, 0x000D, 0x000A},
-+ {LCD_STEP_CMD_DATA, 0x000E, 0x2C00},
-+ {LCD_STEP_CMD_DATA, 0x001E, 0x00AA},
-+ {LCD_STEP_CMD_DATA, 0x0025, 0x8000},
-+ {LCD_STEP_SLEEP, 0, 15},
-+ {LCD_STEP_CMD_DATA, 0x0001, 0x2B3F},
-+ {LCD_STEP_CMD_DATA, 0x0002, 0x0600},
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x6030},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0005, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0006, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0016, 0xEF1C},
-+ {LCD_STEP_CMD_DATA, 0x0017, 0x0003},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0233},
-+ {LCD_STEP_CMD_DATA, 0x000B, 0x5312},
-+ {LCD_STEP_CMD_DATA, 0x000F, 0x0000},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0041, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0042, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0048, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0049, 0x013F},
-+ {LCD_STEP_CMD_DATA, 0x0044, 0xEF00},
-+ {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0046, 0x013F},
-+ {LCD_STEP_CMD_DATA, 0x004A, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x004B, 0x0000},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0030, 0x0707},
-+ {LCD_STEP_CMD_DATA, 0x0031, 0x0704},
-+ {LCD_STEP_CMD_DATA, 0x0032, 0x0204},
-+ {LCD_STEP_CMD_DATA, 0x0033, 0x0201},
-+ {LCD_STEP_CMD_DATA, 0x0034, 0x0203},
-+ {LCD_STEP_CMD_DATA, 0x0035, 0x0204},
-+ {LCD_STEP_CMD_DATA, 0x0036, 0x0204},
-+ {LCD_STEP_CMD_DATA, 0x0037, 0x0502},
-+ {LCD_STEP_CMD_DATA, 0x003A, 0x0302},
-+ {LCD_STEP_CMD_DATA, 0x003B, 0x0500},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0044, 239 << 8 | 0},
-+ {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0046, 319},
-+ {LCD_STEP_DONE, 0, 0},
-+};
-+
-+const struct ubicom32lcd_panel tft2n0369ep = {
-+ .desc = "TFT2N0369E-Portrait",
-+ .init_seq = tft2n0369ep_init,
-+ .horz_reg = 0x4e,
-+ .vert_reg = 0x4f,
-+ .gram_reg = 0x22,
-+ .xres = 240,
-+ .yres = 320,
-+ .stride = 240,
-+ .id = 0x8989,
-+};
-+#endif
-+
-+#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_L
-+static const struct ubicom32lcd_step tft2n0369e_init[] = {
-+ {LCD_STEP_CMD_DATA, 0x0028, 0x0006},
-+ {LCD_STEP_CMD_DATA, 0x0000, 0x0001},
-+ {LCD_STEP_SLEEP, 0, 15},
-+ {LCD_STEP_CMD_DATA, 0x002B, 0x9532},
-+ {LCD_STEP_CMD_DATA, 0x0003, 0xAAAC},
-+ {LCD_STEP_CMD_DATA, 0x000C, 0x0002},
-+ {LCD_STEP_CMD_DATA, 0x000D, 0x000A},
-+ {LCD_STEP_CMD_DATA, 0x000E, 0x2C00},
-+ {LCD_STEP_CMD_DATA, 0x001E, 0x00AA},
-+ {LCD_STEP_CMD_DATA, 0x0025, 0x8000},
-+ {LCD_STEP_SLEEP, 0, 15},
-+ {LCD_STEP_CMD_DATA, 0x0001, 0x2B3F},
-+ {LCD_STEP_CMD_DATA, 0x0002, 0x0600},
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x60A8},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0005, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0006, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0016, 0xEF1C},
-+ {LCD_STEP_CMD_DATA, 0x0017, 0x0003},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0233},
-+ {LCD_STEP_CMD_DATA, 0x000B, 0x5312},
-+ {LCD_STEP_CMD_DATA, 0x000F, 0x0000},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0041, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0042, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0048, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0049, 0x013F},
-+ {LCD_STEP_CMD_DATA, 0x0044, 0xEF00},
-+ {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0046, 0x013F},
-+ {LCD_STEP_CMD_DATA, 0x004A, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x004B, 0x0000},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0030, 0x0707},
-+ {LCD_STEP_CMD_DATA, 0x0031, 0x0704},
-+ {LCD_STEP_CMD_DATA, 0x0032, 0x0204},
-+ {LCD_STEP_CMD_DATA, 0x0033, 0x0201},
-+ {LCD_STEP_CMD_DATA, 0x0034, 0x0203},
-+ {LCD_STEP_CMD_DATA, 0x0035, 0x0204},
-+ {LCD_STEP_CMD_DATA, 0x0036, 0x0204},
-+ {LCD_STEP_CMD_DATA, 0x0037, 0x0502},
-+ {LCD_STEP_CMD_DATA, 0x003A, 0x0302},
-+ {LCD_STEP_CMD_DATA, 0x003B, 0x0500},
-+ {LCD_STEP_SLEEP, 0, 20},
-+ {LCD_STEP_CMD_DATA, 0x0044, 239 << 8 | 0},
-+ {LCD_STEP_CMD_DATA, 0x0045, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0046, 319},
-+ {LCD_STEP_DONE, 0, 0},
-+};
-+
-+const struct ubicom32lcd_panel tft2n0369e = {
-+ .desc = "TFT2N0369E-Landscape",
-+ .init_seq = tft2n0369e_init,
-+ .horz_reg = 0x4e,
-+ .vert_reg = 0x4f,
-+ .gram_reg = 0x22,
-+ .xres = 320,
-+ .yres = 240,
-+ .stride = 320,
-+ .id = 0x8989,
-+};
-+#endif
-+
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240400D
-+static const struct ubicom32lcd_step cfaf240400d_init[] = {
-+ {LCD_STEP_CMD_DATA, 0x0606, 0x0000}, // Pin Control (R606h) // Page 41 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0001}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0110, 0x0001}, // Power Control 6(R110h) // Page 30 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0100, 0x17B0}, // Power Control 1 (R100h) // Page 26 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0101, 0x0147}, // Power Control 2 (R101h) // Page 27 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0102, 0x019D}, // Power Control 3 (R102h) // Page 28 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0103, 0x3600}, // Power Control 4 (R103h) // Page 29 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0281, 0x0010}, // NVM read data 2 (R281h) // Page 34 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0102, 0x01BD}, // Power Control 3 (R102h) // Page 28 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+
-+ //--------------- Power control 1~6 ---------------//
-+ {LCD_STEP_CMD_DATA, 0x0100, 0x16B0}, // Power Control 1 (R100h) // Page 26 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0101, 0x0147}, // Power Control 2 (R101h) // Page 27 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0102, 0x01BD}, // Power Control 3 (R102h) // Page 28 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0103, 0x2d00}, // Power Control 4 (R103h) // Page 29 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0107, 0x0000}, // Power Control 5 (R107h) // Page 30 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0110, 0x0001}, // Power Control 6(R110h) // Page 30 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0280, 0x0000}, // NVM read data 1 (R280h) // Page 33 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0281, 0x0006}, // NVM read data 2 (R281h) // Page 34 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0282, 0x0000}, // NVM read data 3 (R282h) // Page 34 of SPFD5420A Datasheet
-+
-+ //------- Gamma 2.2 control (R300h to R30Fh) ------//
-+ {LCD_STEP_CMD_DATA, 0x0300, 0x0101},
-+ {LCD_STEP_CMD_DATA, 0x0301, 0x0b27},
-+ {LCD_STEP_CMD_DATA, 0x0302, 0x132a},
-+ {LCD_STEP_CMD_DATA, 0x0303, 0x2a13},
-+ {LCD_STEP_CMD_DATA, 0x0304, 0x270b},
-+ {LCD_STEP_CMD_DATA, 0x0305, 0x0101},
-+ {LCD_STEP_CMD_DATA, 0x0306, 0x1205},
-+ {LCD_STEP_CMD_DATA, 0x0307, 0x0512},
-+ {LCD_STEP_CMD_DATA, 0x0308, 0x0005},
-+ {LCD_STEP_CMD_DATA, 0x0309, 0x0003},
-+ {LCD_STEP_CMD_DATA, 0x030A, 0x0f04},
-+ {LCD_STEP_CMD_DATA, 0x030B, 0x0f00},
-+ {LCD_STEP_CMD_DATA, 0x030C, 0x000f},
-+ {LCD_STEP_CMD_DATA, 0x030D, 0x040f},
-+ {LCD_STEP_CMD_DATA, 0x030E, 0x0300},
-+ {LCD_STEP_CMD_DATA, 0x030F, 0x0500},
-+
-+ {LCD_STEP_CMD_DATA, 0x0400, 0x3500}, // Base Image Number of Line (R400h) // Page 36 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0401, 0x0001}, // Base Image Display Control (R401h) // Page 39 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0404, 0x0000}, // Based Image Vertical Scroll Control (R404h) // Page 40 of SPFD5420A Datasheet
-+
-+ //--------------- Normal set ---------------//
-+ {LCD_STEP_CMD_DATA, 0x0000, 0x0000}, // ID Read Register (R000h) // Page 13 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0001, 0x0100}, // Driver Output Control Register (R001h) // Page 14 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0002, 0x0100}, // LCD Driving Waveform Control (R002h) // Page 14 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0003, 0x1030}, // Entry Mode (R003h) // Page 15 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0006, 0x0000}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0008, 0x0808}, // Display Control 2 (R008h) // Page 17 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0009, 0x0001}, // Display Control 3 (R009h) // Page 18 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000B, 0x0010}, // Low Power Control (R00Bh) // Page 19 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000C, 0x0000}, // External Display Interface Control 1 (R00Ch) // Page 19 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x000F, 0x0000}, // External Display Interface Control 2 (R00Fh) // Page 20 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0001}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-+
-+ //--------------- Panel interface control 1~6 ---------------//
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x0012}, // Panel Interface Control 1 (R010h) // Page 20 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x0202}, // Panel Interface Control 2 (R011h) // Page 21 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0012, 0x0300}, // Panel Interface control 3 (R012h) // Page 22 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0020, 0x021E}, // Panel Interface control 4 (R020h) // Page 22 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0021, 0x0202}, // Panel Interface Control 5 (021Rh) // Page 24 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0022, 0x0100}, // Panel Interface Control 6 (R022h) // Page 25 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0090, 0x8000}, // Frame Marker Control (R090h) // Page 25 of SPFD5420A Datasheet
-+
-+ //--------------- Partial display ---------------//
-+ {LCD_STEP_CMD_DATA, 0x0210, 0x0000}, // Window Horizontal RAM Address Start (R210h) // Page 35 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0211, 0x00EF}, // Window Horziontal RAM Address End (R211h) // Page 35 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0212, 0x0000}, // Window Vertical RAM Address Start (R212h) // Page 35 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0213, 0x018F}, // Window Vertical RAM Address End (R213h) // Page 35 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0500, 0x0000}, // Display Position - Partial Display 1 (R500h) // Page 40 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0501, 0x0000}, // RAM Address Start - Partial Display 1 (R501h)// Page 40 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0502, 0x0000}, // RAM Address End - Partail Display 1 (R502h) // Page 40 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0503, 0x0000}, // Display Position - Partial Display 2 (R503h) // Page 40 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0504, 0x0000}, // RAM Address Start . Partial Display 2 (R504h)// Page 41 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0505, 0x0000}, // RAM Address End . Partial Display 2 (R505h) // Page 41 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0606, 0x0000}, // Pin Control (R606h) // Page 41 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x06F0, 0x0000}, // NVM Access Control (R6F0h) // Page 41 of SPFD5420A Datasheet
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0173}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 50},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0171}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-+ {LCD_STEP_SLEEP, 0, 10},
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0173}, // Display Control 1 (R007h) // Page 16 of SPFD5420A Datasheet
-+ {LCD_STEP_DONE, 0, 0},
-+};
-+
-+const struct ubicom32lcd_panel cfaf240400d = {
-+ .desc = "CFAF240400D",
-+ .init_seq = cfaf240400d_init,
-+ .horz_reg = 0x0200,
-+ .vert_reg = 0x0201,
-+ .gram_reg = 0x0202,
-+ .xres = 240,
-+ .yres = 400,
-+ .stride = 240,
-+ .id = 0x5420,
-+};
-+#endif
-+
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240400F
-+static const struct ubicom32lcd_step cfaf320240f_init[] = {
-+ {LCD_STEP_CMD_DATA, 0x0028, 0x0006}, // VCOM OTP Page 55-56 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0000, 0x0001}, // start Oscillator Page 36 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0010, 0x0000}, // Sleep mode Page 49 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0001, 0x32EF}, // Driver Output Control Page 36-39 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0002, 0x0600}, // LCD Driving Waveform Control Page 40-42 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0003, 0x6A38}, // Power Control 1 Page 43-44 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0011, 0x6870}, // Entry Mode Page 50-52 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0X000F, 0x0000}, // Gate Scan Position Page 49 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0X000B, 0x5308}, // Frame Cycle Control Page 45 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x000C, 0x0003}, // Power Control 2 Page 47 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x000D, 0x000A}, // Power Control 3 Page 48 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x000E, 0x2E00}, // Power Control 4 Page 48 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x001E, 0x00BE}, // Power Control 5 Page 53 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0025, 0x8000}, // Frame Frequency Control Page 53 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0026, 0x7800}, // Analog setting Page 54 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x004E, 0x0000}, // Ram Address Set Page 58 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x004F, 0x0000}, // Ram Address Set Page 58 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0012, 0x08D9}, // Sleep mode Page 49 of SSD2119 datasheet
-+
-+ // Gamma Control (R30h to R3Bh) -- Page 56 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0030, 0x0000},
-+ {LCD_STEP_CMD_DATA, 0x0031, 0x0104},
-+ {LCD_STEP_CMD_DATA, 0x0032, 0x0100},
-+ {LCD_STEP_CMD_DATA, 0x0033, 0x0305},
-+ {LCD_STEP_CMD_DATA, 0x0034, 0x0505},
-+ {LCD_STEP_CMD_DATA, 0x0035, 0x0305},
-+ {LCD_STEP_CMD_DATA, 0x0036, 0x0707},
-+ {LCD_STEP_CMD_DATA, 0x0037, 0x0300},
-+ {LCD_STEP_CMD_DATA, 0x003A, 0x1200},
-+ {LCD_STEP_CMD_DATA, 0x003B, 0x0800},
-+
-+ {LCD_STEP_CMD_DATA, 0x0007, 0x0033}, // Display Control Page 45 of SSD2119 datasheet
-+
-+ {LCD_STEP_CMD_DATA, 0x0044, 0xEF00}, // Vertical RAM address position Page 57 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0045, 0x0000}, // Horizontal RAM address position Page 57 of SSD2119 datasheet
-+ {LCD_STEP_CMD_DATA, 0x0046, 0x013F}, // Horizontal RAM address position Page 57 of SSD2119 datasheet
-+
-+ {LCD_STEP_SLEEP, 0, 150},
-+
-+ {LCD_STEP_DONE, 0, 0},
-+};
-+
-+const struct ubicom32lcd_panel cfaf320240f = {
-+ .desc = "CFAF320240F",
-+ .init_seq = cfaf320240f_init,
-+ .horz_reg = 0x4e,
-+ .vert_reg = 0x4f,
-+ .gram_reg = 0x22,
-+ .xres = 320,
-+ .yres = 240,
-+ .stride = 320,
-+ .id = 0x9919,
-+};
-+#endif
-+
-+const struct ubicom32lcd_panel *ubicom32lcd_panels[] = {
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240400KTTS_180
-+ &cfaf240320ktts_180,
-+#endif
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240400KTTS
-+ &cfaf240320ktts_0,
-+#endif
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240400D
-+ &cfaf240400d,
-+#endif
-+#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_P
-+ &tft2n0369ep,
-+#endif
-+#ifdef CONFIG_LCD_UBICOM32_TFT2N0369E_L
-+ &tft2n0369e,
-+#endif
-+#ifdef CONFIG_LCD_UBICOM32_CFAF240400F
-+ &cfaf320240f,
-+#endif
-+ NULL,
-+};
-+
-+#endif
-diff -ruN linux-2.6.30.10/drivers/video/backlight/ubicom32lcdpower.c linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32lcdpower.c
---- linux-2.6.30.10/drivers/video/backlight/ubicom32lcdpower.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/backlight/ubicom32lcdpower.c 2009-12-11 11:45:20.000000000 +0200
-@@ -0,0 +1,194 @@
-+/*
-+ * drivers/video/backlight/ubicom32lcdpowerpower.c
-+ * LCD power driver for the Ubicom32 platform
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/lcd.h>
-+#include <linux/fb.h>
-+#include <linux/gpio.h>
-+
-+#include <asm/ubicom32lcdpower.h>
-+#include <asm/ip5000.h>
-+
-+#define DRIVER_NAME "ubicom32lcdpower"
-+
-+struct ubicom32lcdpower_data {
-+ /*
-+ * Pointer to the platform data structure. Keep this around since we need values
-+ * from it to set the backlight intensity.
-+ */
-+ const struct ubicom32lcdpower_platform_data *pdata;
-+
-+ /*
-+ * LCD device, we have to save this for use when we remove ourselves.
-+ */
-+ struct lcd_device *lcddev;
-+};
-+
-+/*
-+ * ubicom32lcdpower_set_power
-+ */
-+static int ubicom32lcdpower_set_power(struct lcd_device *ld, int power)
-+{
-+ struct ubicom32lcdpower_data *ud = (struct ubicom32lcdpower_data *)lcd_get_data(ld);
-+ if (power == FB_BLANK_UNBLANK) {
-+ gpio_direction_output(ud->pdata->vgh_gpio, ud->pdata->vgh_polarity);
-+ return 0;
-+ }
-+
-+ gpio_direction_output(ud->pdata->vgh_gpio, !ud->pdata->vgh_polarity);
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32lcdpower_get_power
-+ */
-+static int ubicom32lcdpower_get_power(struct lcd_device *ld)
-+{
-+ struct ubicom32lcdpower_data *ud = (struct ubicom32lcdpower_data *)lcd_get_data(ld);
-+ int vgh = gpio_get_value(ud->pdata->vgh_gpio);
-+ if ((vgh && ud->pdata->vgh_polarity) || (!vgh && !ud->pdata->vgh_polarity)) {
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct lcd_ops ubicom32lcdpower_ops = {
-+ .get_power = ubicom32lcdpower_get_power,
-+ .set_power = ubicom32lcdpower_set_power,
-+};
-+
-+/*
-+ * ubicom32lcdpower_probe
-+ */
-+static int ubicom32lcdpower_probe(struct platform_device *pdev)
-+{
-+ const struct ubicom32lcdpower_platform_data *pdata = pdev->dev.platform_data;
-+ struct ubicom32lcdpower_data *ud;
-+ struct lcd_device *lcddev;
-+ int retval;
-+
-+ /*
-+ * Check to see if we have any platform data, if we don't have a LCD to control
-+ */
-+ if (!pdata) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Allocate our private data
-+ */
-+ ud = kzalloc(sizeof(struct ubicom32lcdpower_data), GFP_KERNEL);
-+ if (!ud) {
-+ return -ENOMEM;
-+ }
-+
-+ ud->pdata = pdata;
-+
-+ /*
-+ * Request our GPIOs
-+ */
-+ retval = gpio_request(pdata->vgh_gpio, "vgh");
-+ if (retval) {
-+ dev_err(&pdev->dev, "Failed to allocate vgh GPIO\n");
-+ goto fail_gpio;
-+ }
-+
-+ /*
-+ * Register our lcd device
-+ */
-+ lcddev = lcd_device_register(DRIVER_NAME, &pdev->dev, ud, &ubicom32lcdpower_ops);
-+ if (IS_ERR(lcddev)) {
-+ retval = PTR_ERR(lcddev);
-+ goto fail;
-+ }
-+
-+ ud->lcddev = lcddev;
-+ platform_set_drvdata(pdev, ud);
-+
-+ ubicom32lcdpower_set_power(lcddev, FB_BLANK_UNBLANK);
-+
-+ printk(KERN_INFO DRIVER_NAME ": LCD driver started\n");
-+
-+ return 0;
-+
-+fail:
-+ gpio_free(pdata->vgh_gpio);
-+
-+fail_gpio:
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(ud);
-+ return retval;
-+}
-+
-+/*
-+ * ubicom32lcdpower_remove
-+ */
-+static int __exit ubicom32lcdpower_remove(struct platform_device *pdev)
-+{
-+ struct ubicom32lcdpower_data *ud = platform_get_drvdata(pdev);
-+
-+ lcd_device_unregister(ud->lcddev);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(ud);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ubicom32lcdpower_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .remove = __exit_p(ubicom32lcdpower_remove),
-+};
-+
-+/*
-+ * ubicom32lcdpower_init
-+ */
-+static int __init ubicom32lcdpower_init(void)
-+{
-+ return platform_driver_probe(&ubicom32lcdpower_driver, ubicom32lcdpower_probe);
-+}
-+module_init(ubicom32lcdpower_init);
-+
-+/*
-+ * ubicom32lcdpower_exit
-+ */
-+static void __exit ubicom32lcdpower_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32lcdpower_driver);
-+}
-+module_exit(ubicom32lcdpower_exit);
-+
-+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom32 lcd power driver");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/drivers/video/Kconfig linux-2.6.30.10-ubi/drivers/video/Kconfig
---- linux-2.6.30.10/drivers/video/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/Kconfig 2009-12-11 11:45:20.000000000 +0200
-@@ -609,6 +609,50 @@
- This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
- It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-+config FB_UBICOM32
-+ tristate "Ubicom32 Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ help
-+ This is the framebuffer device driver for the Ubicom32 architecture.
-+ You can configure video memory by using kernel command line parameters, for example:
-+ video=ubicomfb:vram_size=512,init_value=0xffff
-+
-+config FB_UBICOM32_PLIO80
-+ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ select UBICOM32_PLIO
-+ help
-+ This is a framebuffer device driver for the Ubicom32 architecture.
-+ You can configure the xres, yres and vram size (in kilobytes) by using
-+ kernel command line parameters, for example:
-+ video=ubicom32vfb:xres=320,yres=240,vram_size=512
-+
-+config FB_UBICOM32_VIRTUAL
-+ tristate "Ubicom32 Virtual Frame Buffer driver"
-+ depends on FB && UBICOM32
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
-+ help
-+ This is a virtual framebuffer device driver for the Ubicom32 architecture.
-+ You can configure the xres, yres and vram size (in kilobytes) by using
-+ kernel command line parameters, for example:
-+ video=ubicom32vfb:xres=320,yres=240,vram_size=512
-+
-+config FB_UBICOM32_VIRTUAL_NOAUTO
-+ bool "Do not automatically load"
-+ depends on FB_UBICOM32_VIRTUAL
-+ help
-+ Select this option to prevent the VFB from automatically loading at boot.
-
- config FB_STI
- tristate "HP STI frame buffer device support"
-diff -ruN linux-2.6.30.10/drivers/video/Makefile linux-2.6.30.10-ubi/drivers/video/Makefile
---- linux-2.6.30.10/drivers/video/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/Makefile 2009-12-11 11:45:20.000000000 +0200
-@@ -136,6 +136,10 @@
- obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
- obj-$(CONFIG_FB_MX3) += mx3fb.o
-
-+obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
-+obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o
-+obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o
-+
- # the test framebuffer is last
- obj-$(CONFIG_FB_VIRTUAL) += vfb.o
-
-diff -ruN linux-2.6.30.10/drivers/video/ubicom32fb.c linux-2.6.30.10-ubi/drivers/video/ubicom32fb.c
---- linux-2.6.30.10/drivers/video/ubicom32fb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/ubicom32fb.c 2009-12-11 11:45:21.000000000 +0200
-@@ -0,0 +1,779 @@
-+/*
-+ * drivers/video/ubicom32fb.c
-+ * Ubicom32 frame buffer driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+/*
-+ * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
-+ * Geert Uytterhoeven.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include <linux/device.h>
-+#include <linux/uaccess.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/io.h>
-+#include <asm/ip5000.h>
-+#include <asm/vdc_tio.h>
-+#include <asm/ubicom32fb.h>
-+
-+#define DRIVER_NAME "ubicom32fb"
-+#define DRIVER_DESCRIPTION "Ubicom32 frame buffer driver"
-+
-+#define PALETTE_ENTRIES_NO 16
-+
-+/*
-+ * Option variables
-+ *
-+ * vram_size: VRAM size in kilobytes, subject to alignment
-+ */
-+static int vram_size = 0;
-+module_param(vram_size, int, 0);
-+MODULE_PARM_DESC(vram, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
-+static int init_value = 0;
-+module_param(init_value, int, 0);
-+MODULE_PARM_DESC(init, "Initial value of the framebuffer (16-bit number).");
-+
-+/*
-+ * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
-+ */
-+static struct fb_fix_screeninfo ubicom32fb_fix = {
-+ .id = "Ubicom32",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .accel = FB_ACCEL_UBICOM32,
-+};
-+
-+/*
-+ * Filled in at probe time when we find out what the hardware supports
-+ */
-+static struct fb_var_screeninfo ubicom32fb_var;
-+
-+/*
-+ * Private data structure
-+ */
-+struct ubicom32fb_drvdata {
-+ struct fb_info *fbinfo;
-+ bool cmap_alloc;
-+
-+ /*
-+ * The address of the framebuffer in memory
-+ */
-+ void *fb;
-+ void *fb_aligned;
-+
-+ /*
-+ * Total size of vram including alignment allowance
-+ */
-+ u32 total_vram_size;
-+
-+ /*
-+ * Interrupt to set when changing registers
-+ */
-+ u32 vp_int;
-+
-+ /*
-+ * Optional: Interrupt used by TIO to signal us
-+ */
-+ u32 rx_int;
-+
-+ /*
-+ * Base address of the regs for VDC_TIO
-+ */
-+ volatile struct vdc_tio_vp_regs *regs;
-+
-+ /*
-+ * non-zero if we are in yuv mode
-+ */
-+ u8_t is_yuv;
-+
-+ /*
-+ * Fake palette of 16 colors
-+ */
-+ u32 pseudo_palette[PALETTE_ENTRIES_NO];
-+
-+ /*
-+ * Wait queue and lock used to block when we need to wait
-+ * for something to happen.
-+ */
-+ wait_queue_head_t waitq;
-+ struct mutex lock;
-+
-+};
-+
-+/*
-+ * ubicom32fb_set_next_frame
-+ * Sets the next frame buffer to display
-+ *
-+ * if sync is TRUE then this function will block until the hardware
-+ * acknowledges the change
-+ */
-+static inline void ubicom32fb_set_next_frame(struct ubicom32fb_drvdata *ud, void *fb, u8_t sync)
-+{
-+ ud->regs->next_frame_flags = ud->is_yuv ? VDCTIO_NEXT_FRAME_FLAG_YUV : 0;
-+ ud->regs->next_frame = (void *)((u32_t)fb | 1);
-+
-+ /*
-+ * If we have interrupts, then we can wait on it
-+ */
-+ if (ud->rx_int != -1) {
-+ DEFINE_WAIT(wait);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ud->lock, flags);
-+ prepare_to_wait(&ud->waitq, &wait, TASK_INTERRUPTIBLE);
-+ spin_unlock_irqrestore(&ud->lock, flags);
-+ schedule();
-+ finish_wait(&ud->waitq, &wait);
-+ return;
-+ }
-+
-+ /*
-+ * No interrupt, we will just spin here
-+ */
-+ while (sync && ((u32_t)ud->regs->next_frame & 1));
-+}
-+
-+/*
-+ * ubicom32fb_send_command
-+ * Sends a command/data pair to the VDC
-+ */
-+static inline void ubicom32fb_send_command(struct ubicom32fb_drvdata *ud, u16 command, u8_t block)
-+{
-+ ud->regs->command = command;
-+ ubicom32_set_interrupt(ud->vp_int);
-+ while (block && ud->regs->command);
-+}
-+
-+/*
-+ * ubicom32fb_ioctl
-+ * Handles any ioctls sent to us
-+ */
-+static int ubicom32fb_ioctl(struct fb_info *fbi, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)fbi->par;
-+ void __user *argp = (void __user *)arg;
-+ int retval = -EFAULT;
-+
-+ switch (cmd) {
-+ case UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC:
-+ // check alignment, return -EINVAL if necessary
-+ ubicom32fb_set_next_frame(ud, argp, 1);
-+ retval = 0;
-+ break;
-+
-+ case UBICOM32FB_IOCTL_SET_NEXT_FRAME:
-+ // check alignment, return -EINVAL if necessary
-+ ubicom32fb_set_next_frame(ud, argp, 0);
-+ retval = 0;
-+ break;
-+
-+ case UBICOM32FB_IOCTL_SET_MODE:
-+ if (!(ud->regs->caps & VDCTIO_CAPS_SUPPORTS_SCALING)) {
-+ break;
-+ } else {
-+ struct ubicom32fb_mode mode;
-+ volatile struct vdc_tio_vp_regs *regs = ud->regs;
-+ u32_t flags = 0;
-+
-+ if (copy_from_user(&mode, argp, sizeof(mode))) {
-+ break;
-+ }
-+
-+ regs->x_in = mode.width;
-+ regs->y_in = mode.height;
-+ regs->x_out = regs->xres;
-+ regs->y_out = regs->yres;
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER) {
-+ flags |= VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER) {
-+ flags |= VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER;
-+ }
-+ ud->is_yuv = mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV;
-+ if (ud->is_yuv) {
-+ flags |= VDCTIO_SCALE_FLAG_YUV;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255) {
-+ flags |= VDCTIO_SCALE_FLAG_VRANGE_16_255;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255) {
-+ flags |= VDCTIO_SCALE_FLAG_VRANGE_0_255;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB) {
-+ flags |= VDCTIO_SCALE_FLAG_VSUB;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1) {
-+ flags |= VDCTIO_SCALE_FLAG_HSUB_2_1;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1) {
-+ flags |= VDCTIO_SCALE_FLAG_HSUB_1_1;
-+ }
-+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE) {
-+ flags |= VDCTIO_SCALE_FLAG_ENABLE;
-+ }
-+ if (mode.next_frame) {
-+ flags |= VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER;
-+ regs->next_frame = mode.next_frame;
-+ }
-+
-+ regs->scale_flags = flags;
-+ ubicom32fb_send_command(ud, VDCTIO_COMMAND_SET_SCALE_MODE, 1);
-+ retval = 0;
-+ break;
-+ }
-+
-+ default:
-+ retval = -ENOIOCTLCMD;
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+/*
-+ * ubicom32fb_interrupt
-+ * Called by the OS when the TIO has set the rx_int
-+ */
-+static irqreturn_t ubicom32fb_interrupt(int vec, void *appdata)
-+{
-+ struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)appdata;
-+
-+ spin_lock(&ud->lock);
-+ if (waitqueue_active(&ud->waitq)) {
-+ wake_up(&ud->waitq);
-+ }
-+ spin_unlock(&ud->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * ubicom32fb_pan_display
-+ * Pans the display to a given location. Supports only y direction panning.
-+ */
-+static int ubicom32fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
-+{
-+ struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)fbi->par;
-+ void *new_addr;
-+
-+ /*
-+ * Get the last y line that would be displayed. Since we don't support YWRAP,
-+ * it must be less than our virtual y size.
-+ */
-+ u32 lasty = var->yoffset + var->yres;
-+ if (lasty > fbi->var.yres_virtual) {
-+ /*
-+ * We would fall off the end of our frame buffer if we panned here.
-+ */
-+ return -EINVAL;
-+ }
-+
-+ if (var->xoffset) {
-+ /*
-+ * We don't support panning in the x direction
-+ */
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Everything looks sane, go ahead and pan
-+ *
-+ * We have to calculate a new address for the VDC to look at
-+ */
-+ new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
-+
-+ /*
-+ * Send down the command. The buffer will switch at the next vertical blank
-+ */
-+ ubicom32fb_set_next_frame(ud, (void *)new_addr, 0);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32fb_setcolreg
-+ * Sets a color in our virtual palette
-+ */
-+static int ubicom32fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
-+{
-+ u32 *palette = fbi->pseudo_palette;
-+
-+ if (regno >= PALETTE_ENTRIES_NO) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * We only use 8 bits from each color
-+ */
-+ red >>= 8;
-+ green >>= 8;
-+ blue >>= 8;
-+
-+ /*
-+ * Convert any grayscale values
-+ */
-+ if (fbi->var.grayscale) {
-+ u16 gray = red + green + blue;
-+ gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
-+ gray >>= 2;
-+ if (gray > 255) {
-+ gray = 255;
-+ }
-+ red = gray;
-+ blue = gray;
-+ green = gray;
-+ }
-+
-+ palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
-+ (blue << fbi->var.blue.offset);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32fb_mmap
-+ */
-+static int ubicom32fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ struct ubicom32fb_drvdata *drvdata = (struct ubicom32fb_drvdata *)info->par;
-+
-+ vma->vm_start = (unsigned long)(drvdata->fb_aligned);
-+
-+ vma->vm_end = vma->vm_start + info->fix.smem_len;
-+
-+ /* For those who don't understand how mmap works, go read
-+ * Documentation/nommu-mmap.txt.
-+ * For those that do, you will know that the VM_MAYSHARE flag
-+ * must be set in the vma->vm_flags structure on noMMU
-+ * Other flags can be set, and are documented in
-+ * include/linux/mm.h
-+ */
-+
-+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32fb_blank
-+ */
-+static int ubicom32fb_blank(int blank_mode, struct fb_info *fbi)
-+{
-+ return 0;
-+#if 0
-+ struct ubicom32fb_drvdata *drvdata = to_ubicom32fb_drvdata(fbi);
-+
-+ switch (blank_mode) {
-+ case FB_BLANK_UNBLANK:
-+ /* turn on panel */
-+ ubicom32fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
-+ break;
-+
-+ case FB_BLANK_NORMAL:
-+ case FB_BLANK_VSYNC_SUSPEND:
-+ case FB_BLANK_HSYNC_SUSPEND:
-+ case FB_BLANK_POWERDOWN:
-+ /* turn off panel */
-+ ubicom32fb_out_be32(drvdata, REG_CTRL, 0);
-+ default:
-+ break;
-+
-+ }
-+ return 0; /* success */
-+#endif
-+}
-+
-+static struct fb_ops ubicom32fb_ops =
-+{
-+ .owner = THIS_MODULE,
-+ .fb_pan_display = ubicom32fb_pan_display,
-+ .fb_setcolreg = ubicom32fb_setcolreg,
-+ .fb_blank = ubicom32fb_blank,
-+ .fb_mmap = ubicom32fb_mmap,
-+ .fb_ioctl = ubicom32fb_ioctl,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+/*
-+ * ubicom32fb_release
-+ */
-+static int ubicom32fb_release(struct device *dev)
-+{
-+ struct ubicom32fb_drvdata *ud = dev_get_drvdata(dev);
-+
-+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
-+ //ubicom32fb_blank(VESA_POWERDOWN, &drvdata->info);
-+#endif
-+
-+ unregister_framebuffer(ud->fbinfo);
-+
-+ if (ud->cmap_alloc) {
-+ fb_dealloc_cmap(&ud->fbinfo->cmap);
-+ }
-+
-+ if (ud->fb) {
-+ kfree(ud->fb);
-+ }
-+
-+ if (ud->rx_int != -1) {
-+ free_irq(ud->rx_int, ud);
-+ }
-+
-+ /*
-+ * Turn off the display
-+ */
-+ //ubicom32fb_out_be32(drvdata, REG_CTRL, 0);
-+ //iounmap(drvdata->regs);
-+
-+ framebuffer_release(ud->fbinfo);
-+ dev_set_drvdata(dev, NULL);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32fb_platform_probe
-+ */
-+static int __init ubicom32fb_platform_probe(struct platform_device *pdev)
-+{
-+ struct ubicom32fb_drvdata *ud;
-+ struct resource *irq_resource_rx;
-+ struct resource *irq_resource_tx;
-+ struct resource *mem_resource;
-+ struct fb_info *fbinfo;
-+ int rc;
-+ size_t fbsize;
-+ struct device *dev = &pdev->dev;
-+ int offset;
-+ struct vdc_tio_vp_regs *regs;
-+
-+ /*
-+ * Get our resources
-+ */
-+ irq_resource_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!irq_resource_tx) {
-+ dev_err(dev, "No tx IRQ resource assigned\n");
-+ return -ENODEV;
-+ }
-+
-+ irq_resource_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-+ if (!irq_resource_rx) {
-+ dev_err(dev, "No rx IRQ resource assigned\n");
-+ return -ENODEV;
-+ }
-+
-+ mem_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!mem_resource || !mem_resource->start) {
-+ dev_err(dev, "No mem resource assigned\n");
-+ return -ENODEV;
-+ }
-+ regs = (struct vdc_tio_vp_regs *)mem_resource->start;
-+ if (regs->version != VDCTIO_VP_VERSION) {
-+ dev_err(dev, "VDCTIO is not compatible with this driver tio:%x drv:%x\n",
-+ regs->version, VDCTIO_VP_VERSION);
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * This is the minimum VRAM size
-+ */
-+ fbsize = regs->xres * regs->yres * (regs->bpp / 8);
-+ if (!vram_size) {
-+ vram_size = (fbsize + 1023) / 1024;
-+ } else {
-+ if (fbsize > (vram_size * 1024)) {
-+ dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
-+ return -ENOMEM; // should be ebadparam?
-+ }
-+ }
-+
-+ /*
-+ * Allocate the framebuffer instance + our private data
-+ */
-+ fbinfo = framebuffer_alloc(sizeof(struct ubicom32fb_drvdata), &pdev->dev);
-+ if (!fbinfo) {
-+ dev_err(dev, "Not enough memory to allocate instance.\n");
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Fill in our private data.
-+ */
-+ ud = (struct ubicom32fb_drvdata *)fbinfo->par;
-+ ud->fbinfo = fbinfo;
-+ ud->regs = (struct vdc_tio_vp_regs *)(mem_resource->start);
-+ dev_set_drvdata(dev, ud);
-+
-+ ud->vp_int = irq_resource_tx->start;
-+
-+ /*
-+ * If we were provided an rx_irq then we need to init the appropriate
-+ * queues, locks, and functions.
-+ */
-+ ud->rx_int = -1;
-+ if (irq_resource_rx->start != DEVTREE_IRQ_NONE) {
-+ init_waitqueue_head(&ud->waitq);
-+ mutex_init(&ud->lock);
-+ if (request_irq(ud->rx_int, ubicom32fb_interrupt, IRQF_SHARED, "ubicom32fb_rx", ud)) {
-+ dev_err(dev, "Couldn't request rx IRQ\n");
-+ rc = -ENOMEM;
-+ goto fail;
-+ }
-+ ud->rx_int = irq_resource_rx->start;
-+ }
-+
-+ /*
-+ * Allocate and align the requested amount of VRAM
-+ */
-+ ud->total_vram_size = (vram_size * 1024) + regs->fb_align;
-+ ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
-+ if (ud->fb == NULL) {
-+ dev_err(dev, "Couldn't allocate VRAM\n");
-+ rc = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ offset = (u32_t)ud->fb & (regs->fb_align - 1);
-+ if (!offset) {
-+ ud->fb_aligned = ud->fb;
-+ } else {
-+ offset = regs->fb_align - offset;
-+ ud->fb_aligned = ud->fb + offset;
-+ }
-+
-+ /*
-+ * Clear the entire frame buffer
-+ */
-+ if (!init_value) {
-+ memset(ud->fb_aligned, 0, vram_size * 1024);
-+ } else {
-+ unsigned short *p = ud->fb_aligned;
-+ int i;
-+ for (i = 0; i < ((vram_size * 1024) / sizeof(u16_t)); i++) {
-+ *p++ = init_value;
-+ }
-+ }
-+
-+ /*
-+ * Fill in the fb_var_screeninfo structure
-+ */
-+ memset(&ubicom32fb_var, 0, sizeof(ubicom32fb_var));
-+ ubicom32fb_var.bits_per_pixel = regs->bpp;
-+ ubicom32fb_var.red.offset = regs->rshift;
-+ ubicom32fb_var.green.offset = regs->gshift;
-+ ubicom32fb_var.blue.offset = regs->bshift;
-+ ubicom32fb_var.red.length = regs->rbits;
-+ ubicom32fb_var.green.length = regs->gbits;
-+ ubicom32fb_var.blue.length = regs->bbits;
-+ ubicom32fb_var.activate = FB_ACTIVATE_NOW;
-+
-+#if 0
-+ /*
-+ * Turn on the display
-+ */
-+ ud->reg_ctrl_default = REG_CTRL_ENABLE;
-+ if (regs->rotate_screen)
-+ ud->reg_ctrl_default |= REG_CTRL_ROTATE;
-+ ubicom32fb_out_be32(ud, REG_CTRL, ud->reg_ctrl_default);
-+#endif
-+
-+ /*
-+ * Fill in the fb_info structure
-+ */
-+ ud->fbinfo->device = dev;
-+ ud->fbinfo->screen_base = (void *)ud->fb_aligned;
-+ ud->fbinfo->fbops = &ubicom32fb_ops;
-+ ud->fbinfo->fix = ubicom32fb_fix;
-+ ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
-+ ud->fbinfo->fix.smem_len = vram_size * 1024;
-+ ud->fbinfo->fix.line_length = regs->xres * (regs->bpp / 8);
-+ ud->fbinfo->fix.mmio_start = (u32)regs;
-+ ud->fbinfo->fix.mmio_len = sizeof(struct vdc_tio_vp_regs);
-+
-+ /*
-+ * We support panning in the y direction only
-+ */
-+ ud->fbinfo->fix.xpanstep = 0;
-+ ud->fbinfo->fix.ypanstep = 1;
-+
-+ ud->fbinfo->pseudo_palette = ud->pseudo_palette;
-+ ud->fbinfo->flags = FBINFO_DEFAULT;
-+ ud->fbinfo->var = ubicom32fb_var;
-+ ud->fbinfo->var.xres = regs->xres;
-+ ud->fbinfo->var.yres = regs->yres;
-+
-+ /*
-+ * We cannot pan in the X direction, so xres_virtual is regs->xres
-+ * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
-+ */
-+ ud->fbinfo->var.xres_virtual = regs->xres;
-+ ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
-+
-+ //ud->fbinfo->var.height = regs->height_mm;
-+ //ud->fbinfo->var.width = regs->width_mm;
-+
-+ /*
-+ * Allocate a color map
-+ */
-+ rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
-+ if (rc) {
-+ dev_err(dev, "Fail to allocate colormap (%d entries)\n",
-+ PALETTE_ENTRIES_NO);
-+ goto fail;
-+ }
-+ ud->cmap_alloc = true;
-+
-+ /*
-+ * Register new frame buffer
-+ */
-+ rc = register_framebuffer(ud->fbinfo);
-+ if (rc) {
-+ dev_err(dev, "Could not register frame buffer\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Start up the VDC
-+ */
-+ ud->regs->next_frame = ud->fb;
-+ ubicom32fb_send_command(ud, VDCTIO_COMMAND_START, 0);
-+
-+ /*
-+ * Tell the log we are here
-+ */
-+ dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u), regs=%p irqtx=%u irqrx=%u\n",
-+ ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
-+ ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual, ud->regs,
-+ irq_resource_tx->start, irq_resource_rx->start);
-+
-+ /*
-+ * Success
-+ */
-+ return 0;
-+
-+fail:
-+ ubicom32fb_release(dev);
-+ return rc;
-+}
-+
-+/*
-+ * ubicom32fb_platform_remove
-+ */
-+static int ubicom32fb_platform_remove(struct platform_device *pdev)
-+{
-+ dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
-+ return ubicom32fb_release(&pdev->dev);
-+}
-+
-+static struct platform_driver ubicom32fb_platform_driver = {
-+ .probe = ubicom32fb_platform_probe,
-+ .remove = ubicom32fb_platform_remove,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+#ifndef MODULE
-+/*
-+ * ubicom32fb_setup
-+ * Process kernel boot options
-+ */
-+static int __init ubicom32fb_setup(char *options)
-+{
-+ char *this_opt;
-+
-+ if (!options || !*options) {
-+ return 0;
-+ }
-+
-+ while ((this_opt = strsep(&options, ",")) != NULL) {
-+ if (!*this_opt) {
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "init_value=", 10)) {
-+ init_value = simple_strtoul(this_opt + 11, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "vram_size=", 10)) {
-+ vram_size = simple_strtoul(this_opt + 10, NULL, 0);
-+ continue;
-+ }
-+ }
-+ return 0;
-+}
-+#endif /* MODULE */
-+
-+/*
-+ * ubicom32fb_init
-+ */
-+static int __devinit ubicom32fb_init(void)
-+{
-+#ifndef MODULE
-+ /*
-+ * Get kernel boot options (in 'video=ubicom32fb:<options>')
-+ */
-+ char *option = NULL;
-+
-+ if (fb_get_options(DRIVER_NAME, &option)) {
-+ return -ENODEV;
-+ }
-+ ubicom32fb_setup(option);
-+#endif /* MODULE */
-+
-+ return platform_driver_register(&ubicom32fb_platform_driver);
-+}
-+module_init(ubicom32fb_init);
-+
-+/*
-+ * ubicom32fb_exit
-+ */
-+static void __exit ubicom32fb_exit(void)
-+{
-+ platform_driver_unregister(&ubicom32fb_platform_driver);
-+}
-+module_exit(ubicom32fb_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
-diff -ruN linux-2.6.30.10/drivers/video/ubicom32plio80.c linux-2.6.30.10-ubi/drivers/video/ubicom32plio80.c
---- linux-2.6.30.10/drivers/video/ubicom32plio80.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/ubicom32plio80.c 2009-12-11 11:45:21.000000000 +0200
-@@ -0,0 +1,780 @@
-+/*
-+ * drivers/video/ubicom32plio80.c
-+ * Ubicom32 80 bus PLIO buffer driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+/*
-+ * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
-+ * Geert Uytterhoeven.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include <linux/device.h>
-+#include <linux/uaccess.h>
-+#include <asm/plio.h>
-+
-+#define DRIVER_NAME "ubicom32plio80"
-+#define DRIVER_DESCRIPTION "Ubicom32 80 bus PLIO frame buffer driver"
-+
-+#define PALETTE_ENTRIES_NO 16
-+
-+/*
-+ * Option variables
-+ *
-+ * vram_size: VRAM size in kilobytes, subject to alignment
-+ */
-+static int vram_size = 0;
-+module_param(vram_size, int, 0);
-+MODULE_PARM_DESC(vram_size, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
-+
-+static int xres = 240;
-+module_param(xres, int, 0);
-+MODULE_PARM_DESC(xres, "x (horizontal) resolution");
-+
-+static int yres = 320;
-+module_param(yres, int, 0);
-+MODULE_PARM_DESC(yres, "y (vertical) resolution");
-+
-+static int bgr = 0;
-+module_param(bgr, int, 0);
-+MODULE_PARM_DESC(bgr, "display is BGR (Blue is MSB)");
-+
-+#define BITS_PER_PIXEL 16
-+
-+/*
-+ * Buffer alignment, must not be 0
-+ */
-+#define UBICOM32PLIO80_ALIGNMENT 4
-+
-+/*
-+ * PLIO FSM
-+ * 16-bit data bus on port I
-+ * CS on EXTCTL[6]
-+ * WR on EXTCTL[4]
-+ */
-+static const plio_fctl_t plio_fctl = {
-+ .fctl0 = {
-+ .ptif_port_mode = PLIO_PORT_MODE_DI,
-+ .ptif_portd_cfg = 0,
-+ .ptif_porti_cfg = 3,
-+ .edif_ds = 6,
-+ .edif_cmp_mode = 1,
-+ .ecif_extclk_ena = 0, // enable clock output on PD7 table 2.65/p111 says extctl[0]?
-+ .icif_clk_src_sel = PLIO_CLK_IO,
-+ },
-+ .fctl2 = {
-+ .icif_eclk_div = 10,
-+ .icif_iclk_div = 10,
-+ },
-+
-+ };
-+
-+ static const plio_config_t plio_config = {
-+ .pfsm = {
-+ /*
-+ * Table 12.63
-+ */
-+ .grpsel[0] = {1,1,1,1,1,1,1,1,1,1},
-+
-+ /*
-+ * Table 12.66 Counter load value
-+ */
-+ .cs_lut[0] = {0,0,0,0,0,0,0,0},
-+
-+ /*
-+ * Table 2.75 PLIO PFSM Configuration Registers
-+ */
-+ // 3 2 1 0
-+ .extctl_o_lut[0] = {0x3f, 0x2f, 0x3f, 0x3f},
-+ // 7 6 5 4
-+ .extctl_o_lut[1] = {0x3f, 0x3f, 0x3f, 0x2f},
-+ },
-+ .edif = {
-+ .odr_oe = 0xffff,
-+ },
-+ .ecif = {
-+ .output_ena = (1 << 6) | (1 << 4),
-+ },
-+};
-+
-+static const u32_t ubicom32plio80_plio_fsm[] = {
-+ // 0-F
-+ 0x00070007, 0x00070007,
-+ 0x00070007, 0x00070007,
-+ 0x00070007, 0x00070007,
-+ 0x00070007, 0x00070007,
-+
-+ 0x16260806, 0x16260806,
-+ 0x16260806, 0x16260806,
-+ 0x16260806, 0x16260806,
-+ 0x16260806, 0x16260806,
-+
-+ // 10 - 1f
-+ 0x22061806, 0x22061806,
-+ 0x22061806, 0x22061806,
-+ 0x22061806, 0x22061806,
-+ 0x22061806, 0x22061806,
-+
-+ 0x22061806, 0x22061806,
-+ 0x22061806, 0x22061806,
-+ 0x22061806, 0x22061806,
-+ 0x22061806, 0x22061806,
-+
-+ // 20 - 2f
-+ 0x00070806, 0x00070806,
-+ 0x00070806, 0x00070806,
-+ 0x00070806, 0x00070806,
-+ 0x00070806, 0x00070806,
-+
-+ 0x00070806, 0x00070806,
-+ 0x00070806, 0x00070806,
-+ 0x00070806, 0x00070806,
-+ 0x00070806, 0x00070806,
-+};
-+
-+/*
-+ * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
-+ */
-+static struct fb_fix_screeninfo ubicom32plio80_fix = {
-+ .id = "Ubicom32",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .accel = FB_ACCEL_UBICOM32_PLIO80,
-+};
-+
-+/*
-+ * Filled in at probe time when we find out what the hardware supports
-+ */
-+static struct fb_var_screeninfo ubicom32plio80_var;
-+
-+/*
-+ * Private data structure
-+ */
-+struct ubicom32plio80_drvdata {
-+ struct fb_info *fbinfo;
-+ bool cmap_alloc;
-+
-+ /*
-+ * The address of the framebuffer in memory
-+ */
-+ void *fb;
-+ void *fb_aligned;
-+
-+ /*
-+ * Total size of vram including alignment allowance
-+ */
-+ u32 total_vram_size;
-+
-+ /*
-+ * Fake palette of 16 colors
-+ */
-+ u32 pseudo_palette[PALETTE_ENTRIES_NO];
-+
-+ int irq_req;
-+
-+ /*
-+ * Current pointer and bytes left to transfer with the PLIO
-+ */
-+ void *xfer_ptr;
-+ u32 bytes_to_xfer;
-+ u32 busy;
-+};
-+
-+static struct platform_device *ubicom32plio80_platform_device;
-+
-+/*
-+ * ubicom32plio80_isr
-+ */
-+static int ubicom32plio80_isr(int irq, void *appdata)
-+{
-+ struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)appdata;
-+
-+ if (!ud->bytes_to_xfer) {
-+ ubicom32_disable_interrupt(TX_FIFO_INT(PLIO_PORT));
-+ PLIO_NBR->intmask.txfifo_wm = 0;
-+ ud->busy = 0;
-+ return IRQ_HANDLED;
-+ }
-+
-+ asm volatile (
-+ ".rept 8 \n\t"
-+ "move.4 (%[fifo]), (%[data])4++ \n\t"
-+ ".endr \n\t"
-+ : [data] "+a" (ud->xfer_ptr)
-+ : [fifo] "a" (&PLIO_NBR->tx_lo)
-+ );
-+
-+ ud->bytes_to_xfer -= 32;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * ubicom32plio80_update
-+ */
-+static void ubicom32plio80_update(struct ubicom32plio80_drvdata *ud, u32 *fb)
-+{
-+ struct ubicom32_io_port *ri = (struct ubicom32_io_port *)RI;
-+ struct ubicom32_io_port *rd = (struct ubicom32_io_port *)RD;
-+
-+ ud->xfer_ptr = fb;
-+ ud->bytes_to_xfer = (xres * yres * 2) - 64;
-+ ud->busy = 1;
-+
-+ ri->gpio_mask = 0;
-+ rd->gpio_mask &= ~((1 << 4) | (1 << 2));
-+
-+ *(u32 *)(&PLIO_NBR->intclr) = ~0;
-+ PLIO_NBR->intmask.txfifo_wm = 1;
-+ PLIO_NBR->fifo_wm.tx = 8;
-+ ubicom32_enable_interrupt(TX_FIFO_INT(PLIO_PORT));
-+
-+ asm volatile (
-+ ".rept 16 \n\t"
-+ "move.4 (%[fifo]), (%[data])4++ \n\t"
-+ ".endr \n\t"
-+ : [data] "+a" (ud->xfer_ptr)
-+ : [fifo] "a" (&PLIO_NBR->tx_lo)
-+ );
-+}
-+
-+/*
-+ * ubicom32plio80_pan_display
-+ * Pans the display to a given location. Supports only y direction panning.
-+ */
-+static int ubicom32plio80_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
-+{
-+ struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)fbi->par;
-+ void *new_addr;
-+
-+ /*
-+ * Get the last y line that would be displayed. Since we don't support YWRAP,
-+ * it must be less than our virtual y size.
-+ */
-+ u32 lasty = var->yoffset + var->yres;
-+ if (lasty > fbi->var.yres_virtual) {
-+ /*
-+ * We would fall off the end of our frame buffer if we panned here.
-+ */
-+ return -EINVAL;
-+ }
-+
-+ if (var->xoffset) {
-+ /*
-+ * We don't support panning in the x direction
-+ */
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Everything looks sane, go ahead and pan
-+ *
-+ * We have to calculate a new address for the VDC to look at
-+ */
-+ new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32plio80_setcolreg
-+ * Sets a color in our virtual palette
-+ */
-+static int ubicom32plio80_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
-+{
-+ u32 *palette = fbi->pseudo_palette;
-+
-+ if (regno >= PALETTE_ENTRIES_NO) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * We only use 8 bits from each color
-+ */
-+ red >>= 8;
-+ green >>= 8;
-+ blue >>= 8;
-+
-+ /*
-+ * Convert any grayscale values
-+ */
-+ if (fbi->var.grayscale) {
-+ u16 gray = red + green + blue;
-+ gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
-+ gray >>= 2;
-+ if (gray > 255) {
-+ gray = 255;
-+ }
-+ red = gray;
-+ blue = gray;
-+ green = gray;
-+ }
-+
-+ palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
-+ (blue << fbi->var.blue.offset);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32plio80_mmap
-+ */
-+static int ubicom32plio80_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)info->par;
-+
-+ vma->vm_start = (unsigned long)(ud->fb_aligned);
-+
-+ vma->vm_end = vma->vm_start + info->fix.smem_len;
-+
-+ /* For those who don't understand how mmap works, go read
-+ * Documentation/nommu-mmap.txt.
-+ * For those that do, you will know that the VM_MAYSHARE flag
-+ * must be set in the vma->vm_flags structure on noMMU
-+ * Other flags can be set, and are documented in
-+ * include/linux/mm.h
-+ */
-+
-+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32plio80_check_var
-+ * Check the var, tweak it but don't change operational parameters.
-+ */
-+static int ubicom32plio80_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+ struct ubicom32plio80_drvdata *ud = (struct ubicom32plio80_drvdata *)info->par;
-+ u32 line_size = var->xres * (BITS_PER_PIXEL / 8);
-+
-+ /*
-+ * See if we can handle this bpp
-+ */
-+ if (var->bits_per_pixel > BITS_PER_PIXEL) {
-+ return -EINVAL;
-+ }
-+ var->bits_per_pixel = BITS_PER_PIXEL;
-+
-+ /*
-+ * See if we have enough memory to handle this resolution
-+ */
-+ if ((line_size * var->yres * BITS_PER_PIXEL / 8) > ud->total_vram_size) {
-+ return -EINVAL;
-+ }
-+
-+ var->xres_virtual = var->xres;
-+ var->yres_virtual = ud->total_vram_size / line_size;
-+
-+ var->red.length = 5;
-+ var->green.length = 6;
-+ var->green.offset = 5;
-+ var->blue.length = 5;
-+ var->transp.offset = var->transp.length = 0;
-+
-+ if (bgr) {
-+ var->red.offset = 0;
-+ var->blue.offset = 11;
-+ } else {
-+ var->red.offset = 11;
-+ var->blue.offset = 0;
-+ }
-+
-+ var->nonstd = 0;
-+ var->height = -1;
-+ var->width = -1;
-+ var->vmode = FB_VMODE_NONINTERLACED;
-+ var->sync = 0;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32plio80_set_par
-+ * Set the video mode according to info->var
-+ */
-+static int ubicom32plio80_set_par(struct fb_info *info)
-+{
-+ /*
-+ * Anything changed?
-+ */
-+ if ((xres == info->var.xres) && (yres == info->var.yres)) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Implement changes
-+ */
-+ xres = info->var.xres;
-+ yres = info->var.yres;
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+ info->fix.xpanstep = 0;
-+ info->fix.ypanstep = 1;
-+ info->fix.line_length = xres * (BITS_PER_PIXEL / 8);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32plio80_ops
-+ * List of supported operations
-+ */
-+static struct fb_ops ubicom32plio80_ops =
-+{
-+ .owner = THIS_MODULE,
-+ .fb_pan_display = ubicom32plio80_pan_display,
-+ .fb_setcolreg = ubicom32plio80_setcolreg,
-+ .fb_mmap = ubicom32plio80_mmap,
-+ .fb_check_var = ubicom32plio80_check_var,
-+ .fb_set_par = ubicom32plio80_set_par,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+/*
-+ * ubicom32plio80_release
-+ */
-+static int ubicom32plio80_release(struct device *dev)
-+{
-+ struct ubicom32plio80_drvdata *ud = dev_get_drvdata(dev);
-+
-+ unregister_framebuffer(ud->fbinfo);
-+
-+ if (ud->irq_req) {
-+ free_irq(TX_FIFO_INT(PLIO_PORT), ud);
-+ }
-+ if (ud->cmap_alloc) {
-+ fb_dealloc_cmap(&ud->fbinfo->cmap);
-+ }
-+
-+ if (ud->fb) {
-+ kfree(ud->fb);
-+ }
-+
-+ framebuffer_release(ud->fbinfo);
-+ dev_set_drvdata(dev, NULL);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32plio80_platform_probe
-+ */
-+static int __init ubicom32plio80_platform_probe(struct platform_device *pdev)
-+{
-+ struct ubicom32plio80_drvdata *ud;
-+ struct fb_info *fbinfo;
-+ int rc;
-+ size_t fbsize;
-+ struct device *dev = &pdev->dev;
-+ int offset;
-+
-+ /*
-+ * This is the minimum VRAM size
-+ */
-+ fbsize = xres * yres * 2;
-+ if (!vram_size) {
-+ vram_size = (fbsize + 1023) / 1024;
-+ } else {
-+ if (fbsize > (vram_size * 1024)) {
-+ dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
-+ return -ENOMEM; // should be ebadparam?
-+ }
-+ }
-+
-+ /*
-+ * Allocate the framebuffer instance + our private data
-+ */
-+ fbinfo = framebuffer_alloc(sizeof(struct ubicom32plio80_drvdata), &pdev->dev);
-+ if (!fbinfo) {
-+ dev_err(dev, "Not enough memory to allocate instance.\n");
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Fill in our private data.
-+ */
-+ ud = (struct ubicom32plio80_drvdata *)fbinfo->par;
-+ ud->fbinfo = fbinfo;
-+ dev_set_drvdata(dev, ud);
-+
-+ /*
-+ * Allocate and align the requested amount of VRAM
-+ */
-+ ud->total_vram_size = (vram_size * 1024) + UBICOM32PLIO80_ALIGNMENT;
-+ ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
-+ if (ud->fb == NULL) {
-+ dev_err(dev, "Couldn't allocate VRAM\n");
-+ rc = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ offset = (u32_t)ud->fb & (UBICOM32PLIO80_ALIGNMENT - 1);
-+ if (!offset) {
-+ ud->fb_aligned = ud->fb;
-+ } else {
-+ offset = UBICOM32PLIO80_ALIGNMENT - offset;
-+ ud->fb_aligned = ud->fb + offset;
-+ }
-+
-+ /*
-+ * Clear the entire frame buffer
-+ */
-+ memset(ud->fb_aligned, 0, vram_size * 1024);
-+
-+ /*
-+ * Fill in the fb_var_screeninfo structure
-+ */
-+ memset(&ubicom32plio80_var, 0, sizeof(ubicom32plio80_var));
-+ ubicom32plio80_var.bits_per_pixel = BITS_PER_PIXEL;
-+ ubicom32plio80_var.red.length = 5;
-+ ubicom32plio80_var.green.length = 6;
-+ ubicom32plio80_var.green.offset = 5;
-+ ubicom32plio80_var.blue.length = 5;
-+ ubicom32plio80_var.activate = FB_ACTIVATE_NOW;
-+
-+ if (bgr) {
-+ ubicom32plio80_var.red.offset = 0;
-+ ubicom32plio80_var.blue.offset = 11;
-+ } else {
-+ ubicom32plio80_var.red.offset = 11;
-+ ubicom32plio80_var.blue.offset = 0;
-+ }
-+
-+ /*
-+ * Fill in the fb_info structure
-+ */
-+ ud->fbinfo->device = dev;
-+ ud->fbinfo->screen_base = (void *)ud->fb_aligned;
-+ ud->fbinfo->fbops = &ubicom32plio80_ops;
-+ ud->fbinfo->fix = ubicom32plio80_fix;
-+ ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
-+ ud->fbinfo->fix.smem_len = vram_size * 1024;
-+ ud->fbinfo->fix.line_length = xres * 2;
-+ ud->fbinfo->fix.mmio_start = (u32)ud;
-+ ud->fbinfo->fix.mmio_len = sizeof(struct ubicom32plio80_drvdata);
-+
-+ /*
-+ * We support panning in the y direction only
-+ */
-+ ud->fbinfo->fix.xpanstep = 0;
-+ ud->fbinfo->fix.ypanstep = 1;
-+
-+ ud->fbinfo->pseudo_palette = ud->pseudo_palette;
-+ ud->fbinfo->flags = FBINFO_DEFAULT;
-+ ud->fbinfo->var = ubicom32plio80_var;
-+ ud->fbinfo->var.xres = xres;
-+ ud->fbinfo->var.yres = yres;
-+
-+ /*
-+ * We cannot pan in the X direction, so xres_virtual is xres
-+ * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
-+ */
-+ ud->fbinfo->var.xres_virtual = xres;
-+ ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
-+
-+ /*
-+ * Allocate a color map
-+ */
-+ rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
-+ if (rc) {
-+ dev_err(dev, "Fail to allocate colormap (%d entries)\n",
-+ PALETTE_ENTRIES_NO);
-+ goto fail;
-+ }
-+ ud->cmap_alloc = true;
-+
-+ /*
-+ * Register new frame buffer
-+ */
-+ rc = register_framebuffer(ud->fbinfo);
-+ if (rc) {
-+ dev_err(dev, "Could not register frame buffer\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * request the PLIO IRQ
-+ */
-+ rc = request_irq(TX_FIFO_INT(PLIO_PORT), ubicom32plio80_isr, IRQF_DISABLED, "ubicom32plio80", ud);
-+ if (rc) {
-+ dev_err(dev, "Could not request IRQ\n");
-+ goto fail;
-+ }
-+ ud->irq_req = 1;
-+
-+ /*
-+ * Clear any garbage out of the TX FIFOs (idif_txfifo_flush)
-+ *
-+ * cast through ubicom32_io_port to make sure the compiler does a word write
-+ */
-+ ((struct ubicom32_io_port *)PLIO_NBR)->int_set = (1 << 18);
-+
-+ /*
-+ * Start up the state machine
-+ */
-+ plio_init(&plio_fctl, &plio_config, (plio_sram_t *)ubicom32plio80_plio_fsm, sizeof(ubicom32plio80_plio_fsm));
-+ PLIO_NBR->fctl0.pfsm_cmd = 0;
-+
-+ ubicom32plio80_update(ud, ud->fb_aligned);
-+
-+ /*
-+ * Tell the log we are here
-+ */
-+ dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u)\n",
-+ ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
-+ ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual);
-+
-+ /*
-+ * Success
-+ */
-+ return 0;
-+
-+fail:
-+ ubicom32plio80_release(dev);
-+ return rc;
-+}
-+
-+/*
-+ * ubicom32plio80_platform_remove
-+ */
-+static int ubicom32plio80_platform_remove(struct platform_device *pdev)
-+{
-+ dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
-+ return ubicom32plio80_release(&pdev->dev);
-+}
-+
-+static struct platform_driver ubicom32plio80_platform_driver = {
-+ .probe = ubicom32plio80_platform_probe,
-+ .remove = ubicom32plio80_platform_remove,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+#ifndef MODULE
-+/*
-+ * ubicom32plio80_setup
-+ * Process kernel boot options
-+ */
-+static int __init ubicom32plio80_setup(char *options)
-+{
-+ char *this_opt;
-+
-+ if (!options || !*options) {
-+ return 0;
-+ }
-+
-+ while ((this_opt = strsep(&options, ",")) != NULL) {
-+ if (!*this_opt) {
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "vram_size=", 10)) {
-+ vram_size = simple_strtoul(this_opt + 10, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "bgr=", 4)) {
-+ bgr = simple_strtoul(this_opt + 4, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "xres=", 5)) {
-+ xres = simple_strtoul(this_opt + 5, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "yres=", 5)) {
-+ yres = simple_strtoul(this_opt + 5, NULL, 0);
-+ continue;
-+ }
-+ }
-+ return 0;
-+}
-+#endif /* MODULE */
-+
-+/*
-+ * ubicom32plio80_init
-+ */
-+static int __devinit ubicom32plio80_init(void)
-+{
-+ int ret;
-+
-+#ifndef MODULE
-+ /*
-+ * Get kernel boot options (in 'video=ubicom32plio80:<options>')
-+ */
-+ char *option = NULL;
-+
-+ if (fb_get_options(DRIVER_NAME, &option)) {
-+ return -ENODEV;
-+ }
-+ ubicom32plio80_setup(option);
-+#endif /* MODULE */
-+
-+ ret = platform_driver_register(&ubicom32plio80_platform_driver);
-+
-+ if (!ret) {
-+ ubicom32plio80_platform_device = platform_device_alloc(DRIVER_NAME, 0);
-+
-+ if (ubicom32plio80_platform_device)
-+ ret = platform_device_add(ubicom32plio80_platform_device);
-+ else
-+ ret = -ENOMEM;
-+
-+ if (ret) {
-+ platform_device_put(ubicom32plio80_platform_device);
-+ platform_driver_unregister(&ubicom32plio80_platform_driver);
-+ }
-+ }
-+
-+ return ret;
-+}
-+module_init(ubicom32plio80_init);
-+
-+/*
-+ * ubicom32plio80_exit
-+ */
-+static void __exit ubicom32plio80_exit(void)
-+{
-+ platform_device_unregister(ubicom32plio80_platform_device);
-+ platform_driver_unregister(&ubicom32plio80_platform_driver);
-+}
-+module_exit(ubicom32plio80_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
-diff -ruN linux-2.6.30.10/drivers/video/ubicom32vfb.c linux-2.6.30.10-ubi/drivers/video/ubicom32vfb.c
---- linux-2.6.30.10/drivers/video/ubicom32vfb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/video/ubicom32vfb.c 2009-12-11 11:45:21.000000000 +0200
-@@ -0,0 +1,603 @@
-+/*
-+ * drivers/video/ubicom32vfb.c
-+ * Ubicom32 virtual frame buffer driver
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+/*
-+ * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
-+ * Geert Uytterhoeven.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include <linux/device.h>
-+#include <linux/uaccess.h>
-+
-+#define DRIVER_NAME "ubicom32vfb"
-+#define DRIVER_DESCRIPTION "Ubicom32 virtual frame buffer driver"
-+
-+#define PALETTE_ENTRIES_NO 16
-+
-+/*
-+ * Option variables
-+ *
-+ * vram_size: VRAM size in kilobytes, subject to alignment
-+ */
-+static int vram_size = 0;
-+module_param(vram_size, int, 0);
-+MODULE_PARM_DESC(vram_size, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
-+
-+static int xres = 320;
-+module_param(xres, int, 0);
-+MODULE_PARM_DESC(xres, "x (horizontal) resolution");
-+
-+static int yres = 240;
-+module_param(yres, int, 0);
-+MODULE_PARM_DESC(yres, "y (vertical) resolution");
-+
-+static int bgr = 0;
-+module_param(bgr, int, 0);
-+MODULE_PARM_DESC(bgr, "display is BGR (Blue is MSB)");
-+
-+#define BITS_PER_PIXEL 16
-+
-+/*
-+ * Buffer alignment, must not be 0
-+ */
-+#define UBICOM32VFB_ALIGNMENT 4
-+
-+/*
-+ * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
-+ */
-+static struct fb_fix_screeninfo ubicom32vfb_fix = {
-+ .id = "Ubicom32",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .accel = FB_ACCEL_UBICOM32_VFB,
-+};
-+
-+/*
-+ * Filled in at probe time when we find out what the hardware supports
-+ */
-+static struct fb_var_screeninfo ubicom32vfb_var;
-+
-+/*
-+ * Private data structure
-+ */
-+struct ubicom32vfb_drvdata {
-+ struct fb_info *fbinfo;
-+ bool cmap_alloc;
-+
-+ /*
-+ * The address of the framebuffer in memory
-+ */
-+ void *fb;
-+ void *fb_aligned;
-+
-+ /*
-+ * Total size of vram including alignment allowance
-+ */
-+ u32 total_vram_size;
-+
-+ /*
-+ * Fake palette of 16 colors
-+ */
-+ u32 pseudo_palette[PALETTE_ENTRIES_NO];
-+};
-+
-+static struct platform_device *ubicom32vfb_platform_device;
-+
-+/*
-+ * ubicom32vfb_pan_display
-+ * Pans the display to a given location. Supports only y direction panning.
-+ */
-+static int ubicom32vfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
-+{
-+ struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)fbi->par;
-+ void *new_addr;
-+
-+ /*
-+ * Get the last y line that would be displayed. Since we don't support YWRAP,
-+ * it must be less than our virtual y size.
-+ */
-+ u32 lasty = var->yoffset + var->yres;
-+ if (lasty > fbi->var.yres_virtual) {
-+ /*
-+ * We would fall off the end of our frame buffer if we panned here.
-+ */
-+ return -EINVAL;
-+ }
-+
-+ if (var->xoffset) {
-+ /*
-+ * We don't support panning in the x direction
-+ */
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Everything looks sane, go ahead and pan
-+ *
-+ * We have to calculate a new address for the VDC to look at
-+ */
-+ new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32vfb_setcolreg
-+ * Sets a color in our virtual palette
-+ */
-+static int ubicom32vfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
-+{
-+ u32 *palette = fbi->pseudo_palette;
-+
-+ if (regno >= PALETTE_ENTRIES_NO) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * We only use 8 bits from each color
-+ */
-+ red >>= 8;
-+ green >>= 8;
-+ blue >>= 8;
-+
-+ /*
-+ * Convert any grayscale values
-+ */
-+ if (fbi->var.grayscale) {
-+ u16 gray = red + green + blue;
-+ gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
-+ gray >>= 2;
-+ if (gray > 255) {
-+ gray = 255;
-+ }
-+ red = gray;
-+ blue = gray;
-+ green = gray;
-+ }
-+
-+ palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
-+ (blue << fbi->var.blue.offset);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32vfb_mmap
-+ */
-+static int ubicom32vfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)info->par;
-+
-+ vma->vm_start = (unsigned long)(ud->fb_aligned);
-+
-+ vma->vm_end = vma->vm_start + info->fix.smem_len;
-+
-+ /* For those who don't understand how mmap works, go read
-+ * Documentation/nommu-mmap.txt.
-+ * For those that do, you will know that the VM_MAYSHARE flag
-+ * must be set in the vma->vm_flags structure on noMMU
-+ * Other flags can be set, and are documented in
-+ * include/linux/mm.h
-+ */
-+
-+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32vfb_check_var
-+ * Check the var, tweak it but don't change operational parameters.
-+ */
-+static int ubicom32vfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+ struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)info->par;
-+ u32 line_size = var->xres * (BITS_PER_PIXEL / 8);
-+
-+ /*
-+ * See if we can handle this bpp
-+ */
-+ if (var->bits_per_pixel > BITS_PER_PIXEL) {
-+ return -EINVAL;
-+ }
-+ var->bits_per_pixel = BITS_PER_PIXEL;
-+
-+ /*
-+ * See if we have enough memory to handle this resolution
-+ */
-+ if ((line_size * var->yres * BITS_PER_PIXEL / 8) > ud->total_vram_size) {
-+ return -EINVAL;
-+ }
-+
-+ var->xres_virtual = var->xres;
-+ var->yres_virtual = ud->total_vram_size / line_size;
-+
-+ var->red.length = 5;
-+ var->green.length = 6;
-+ var->green.offset = 5;
-+ var->blue.length = 5;
-+ var->transp.offset = var->transp.length = 0;
-+
-+ if (bgr) {
-+ var->red.offset = 0;
-+ var->blue.offset = 11;
-+ } else {
-+ var->red.offset = 11;
-+ var->blue.offset = 0;
-+ }
-+
-+ var->nonstd = 0;
-+ var->height = -1;
-+ var->width = -1;
-+ var->vmode = FB_VMODE_NONINTERLACED;
-+ var->sync = 0;
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32vfb_set_par
-+ * Set the video mode according to info->var
-+ */
-+static int ubicom32vfb_set_par(struct fb_info *info)
-+{
-+ /*
-+ * Anything changed?
-+ */
-+ if ((xres == info->var.xres) && (yres == info->var.yres)) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Implement changes
-+ */
-+ xres = info->var.xres;
-+ yres = info->var.yres;
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+ info->fix.xpanstep = 0;
-+ info->fix.ypanstep = 1;
-+ info->fix.line_length = xres * (BITS_PER_PIXEL / 8);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32vfb_ops
-+ * List of supported operations
-+ */
-+static struct fb_ops ubicom32vfb_ops =
-+{
-+ .owner = THIS_MODULE,
-+ .fb_pan_display = ubicom32vfb_pan_display,
-+ .fb_setcolreg = ubicom32vfb_setcolreg,
-+ .fb_mmap = ubicom32vfb_mmap,
-+ .fb_check_var = ubicom32vfb_check_var,
-+ .fb_set_par = ubicom32vfb_set_par,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+/*
-+ * ubicom32vfb_release
-+ */
-+static int ubicom32vfb_release(struct device *dev)
-+{
-+ struct ubicom32vfb_drvdata *ud = dev_get_drvdata(dev);
-+
-+ unregister_framebuffer(ud->fbinfo);
-+
-+ if (ud->cmap_alloc) {
-+ fb_dealloc_cmap(&ud->fbinfo->cmap);
-+ }
-+
-+ if (ud->fb) {
-+ kfree(ud->fb);
-+ }
-+
-+ framebuffer_release(ud->fbinfo);
-+ dev_set_drvdata(dev, NULL);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubicom32vfb_platform_probe
-+ */
-+static int __init ubicom32vfb_platform_probe(struct platform_device *pdev)
-+{
-+ struct ubicom32vfb_drvdata *ud;
-+ struct fb_info *fbinfo;
-+ int rc;
-+ size_t fbsize;
-+ struct device *dev = &pdev->dev;
-+ int offset;
-+
-+ /*
-+ * This is the minimum VRAM size
-+ */
-+ fbsize = xres * yres * 2;
-+ if (!vram_size) {
-+ vram_size = (fbsize + 1023) / 1024;
-+ } else {
-+ if (fbsize > (vram_size * 1024)) {
-+ dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
-+ return -ENOMEM; // should be ebadparam?
-+ }
-+ }
-+
-+ /*
-+ * Allocate the framebuffer instance + our private data
-+ */
-+ fbinfo = framebuffer_alloc(sizeof(struct ubicom32vfb_drvdata), &pdev->dev);
-+ if (!fbinfo) {
-+ dev_err(dev, "Not enough memory to allocate instance.\n");
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Fill in our private data.
-+ */
-+ ud = (struct ubicom32vfb_drvdata *)fbinfo->par;
-+ ud->fbinfo = fbinfo;
-+ dev_set_drvdata(dev, ud);
-+
-+ /*
-+ * Allocate and align the requested amount of VRAM
-+ */
-+ ud->total_vram_size = (vram_size * 1024) + UBICOM32VFB_ALIGNMENT;
-+ ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
-+ if (ud->fb == NULL) {
-+ dev_err(dev, "Couldn't allocate VRAM\n");
-+ rc = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ offset = (u32_t)ud->fb & (UBICOM32VFB_ALIGNMENT - 1);
-+ if (!offset) {
-+ ud->fb_aligned = ud->fb;
-+ } else {
-+ offset = UBICOM32VFB_ALIGNMENT - offset;
-+ ud->fb_aligned = ud->fb + offset;
-+ }
-+
-+ /*
-+ * Clear the entire frame buffer
-+ */
-+ memset(ud->fb_aligned, 0, vram_size * 1024);
-+
-+ /*
-+ * Fill in the fb_var_screeninfo structure
-+ */
-+ memset(&ubicom32vfb_var, 0, sizeof(ubicom32vfb_var));
-+ ubicom32vfb_var.bits_per_pixel = BITS_PER_PIXEL;
-+ ubicom32vfb_var.red.length = 5;
-+ ubicom32vfb_var.green.length = 6;
-+ ubicom32vfb_var.green.offset = 5;
-+ ubicom32vfb_var.blue.length = 5;
-+ ubicom32vfb_var.activate = FB_ACTIVATE_NOW;
-+
-+ if (bgr) {
-+ ubicom32vfb_var.red.offset = 0;
-+ ubicom32vfb_var.blue.offset = 11;
-+ } else {
-+ ubicom32vfb_var.red.offset = 11;
-+ ubicom32vfb_var.blue.offset = 0;
-+ }
-+
-+ /*
-+ * Fill in the fb_info structure
-+ */
-+ ud->fbinfo->device = dev;
-+ ud->fbinfo->screen_base = (void *)ud->fb_aligned;
-+ ud->fbinfo->fbops = &ubicom32vfb_ops;
-+ ud->fbinfo->fix = ubicom32vfb_fix;
-+ ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
-+ ud->fbinfo->fix.smem_len = vram_size * 1024;
-+ ud->fbinfo->fix.line_length = xres * 2;
-+ ud->fbinfo->fix.mmio_start = (u32)ud;
-+ ud->fbinfo->fix.mmio_len = sizeof(struct ubicom32vfb_drvdata);
-+
-+ /*
-+ * We support panning in the y direction only
-+ */
-+ ud->fbinfo->fix.xpanstep = 0;
-+ ud->fbinfo->fix.ypanstep = 1;
-+
-+ ud->fbinfo->pseudo_palette = ud->pseudo_palette;
-+ ud->fbinfo->flags = FBINFO_DEFAULT;
-+ ud->fbinfo->var = ubicom32vfb_var;
-+ ud->fbinfo->var.xres = xres;
-+ ud->fbinfo->var.yres = yres;
-+
-+ /*
-+ * We cannot pan in the X direction, so xres_virtual is xres
-+ * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
-+ */
-+ ud->fbinfo->var.xres_virtual = xres;
-+ ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
-+
-+ /*
-+ * Allocate a color map
-+ */
-+ rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
-+ if (rc) {
-+ dev_err(dev, "Fail to allocate colormap (%d entries)\n",
-+ PALETTE_ENTRIES_NO);
-+ goto fail;
-+ }
-+ ud->cmap_alloc = true;
-+
-+ /*
-+ * Register new frame buffer
-+ */
-+ rc = register_framebuffer(ud->fbinfo);
-+ if (rc) {
-+ dev_err(dev, "Could not register frame buffer\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Tell the log we are here
-+ */
-+ dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u)\n",
-+ ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
-+ ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual);
-+
-+ /*
-+ * Success
-+ */
-+ return 0;
-+
-+fail:
-+ ubicom32vfb_release(dev);
-+ return rc;
-+}
-+
-+/*
-+ * ubicom32vfb_platform_remove
-+ */
-+static int ubicom32vfb_platform_remove(struct platform_device *pdev)
-+{
-+ dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
-+ return ubicom32vfb_release(&pdev->dev);
-+}
-+
-+static struct platform_driver ubicom32vfb_platform_driver = {
-+ .probe = ubicom32vfb_platform_probe,
-+ .remove = ubicom32vfb_platform_remove,
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+#ifndef MODULE
-+/*
-+ * ubicom32vfb_setup
-+ * Process kernel boot options
-+ */
-+static int __init ubicom32vfb_setup(char *options)
-+{
-+ char *this_opt;
-+
-+ if (!options || !*options) {
-+ return 0;
-+ }
-+
-+ while ((this_opt = strsep(&options, ",")) != NULL) {
-+ if (!*this_opt) {
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "vram_size=", 10)) {
-+ vram_size = simple_strtoul(this_opt + 10, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "bgr=", 4)) {
-+ bgr = simple_strtoul(this_opt + 4, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "xres=", 5)) {
-+ xres = simple_strtoul(this_opt + 5, NULL, 0);
-+ continue;
-+ }
-+
-+ if (!strncmp(this_opt, "yres=", 5)) {
-+ yres = simple_strtoul(this_opt + 5, NULL, 0);
-+ continue;
-+ }
-+ }
-+ return 0;
-+}
-+#endif /* MODULE */
-+
-+/*
-+ * ubicom32vfb_init
-+ */
-+static int __devinit ubicom32vfb_init(void)
-+{
-+ int ret;
-+
-+#ifndef MODULE
-+ /*
-+ * Get kernel boot options (in 'video=ubicom32vfb:<options>')
-+ */
-+ char *option = NULL;
-+
-+ if (fb_get_options(DRIVER_NAME, &option)) {
-+ return -ENODEV;
-+ }
-+ ubicom32vfb_setup(option);
-+#endif /* MODULE */
-+
-+ ret = platform_driver_register(&ubicom32vfb_platform_driver);
-+
-+#ifdef CONFIG_FB_UBICOM32_VIRTUAL_NOAUTO
-+ return ret;
-+#else
-+ if (!ret) {
-+ ubicom32vfb_platform_device = platform_device_alloc(DRIVER_NAME, 0);
-+
-+ if (ubicom32vfb_platform_device)
-+ ret = platform_device_add(ubicom32vfb_platform_device);
-+ else
-+ ret = -ENOMEM;
-+
-+ if (ret) {
-+ platform_device_put(ubicom32vfb_platform_device);
-+ platform_driver_unregister(&ubicom32vfb_platform_driver);
-+ }
-+ }
-+
-+ return ret;
-+#endif
-+}
-+module_init(ubicom32vfb_init);
-+
-+/*
-+ * ubicom32vfb_exit
-+ */
-+static void __exit ubicom32vfb_exit(void)
-+{
-+ platform_device_unregister(ubicom32vfb_platform_device);
-+ platform_driver_unregister(&ubicom32vfb_platform_driver);
-+}
-+module_exit(ubicom32vfb_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
-diff -ruN linux-2.6.30.10/drivers/watchdog/Kconfig linux-2.6.30.10-ubi/drivers/watchdog/Kconfig
---- linux-2.6.30.10/drivers/watchdog/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/watchdog/Kconfig 2009-12-11 11:45:21.000000000 +0200
-@@ -887,6 +887,19 @@
- machines. The watchdog timeout period is normally one minute but
- can be changed with a boot-time parameter.
-
-+# Ubicom32
-+
-+config UBI32_WDT
-+ tristate "Ubicom32 Hardware Watchdog support"
-+ depends on UBICOM32
-+ ---help---
-+ If you say yes here you will get support for the Ubicom32 On-Chip
-+ Watchdog Timer. If you have one of these processors and wish to
-+ have watchdog support enabled, say Y, otherwise say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called ubi32_wdt.
-+
- # XTENSA Architecture
-
- #
-diff -ruN linux-2.6.30.10/drivers/watchdog/Makefile linux-2.6.30.10-ubi/drivers/watchdog/Makefile
---- linux-2.6.30.10/drivers/watchdog/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/watchdog/Makefile 2009-12-11 11:45:21.000000000 +0200
-@@ -131,6 +131,9 @@
- obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
- obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
-
-+# Ubicom32 Architecture
-+obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
-+
- # XTENSA Architecture
-
- # Architecture Independant
-diff -ruN linux-2.6.30.10/drivers/watchdog/ubi32_wdt.c linux-2.6.30.10-ubi/drivers/watchdog/ubi32_wdt.c
---- linux-2.6.30.10/drivers/watchdog/ubi32_wdt.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/drivers/watchdog/ubi32_wdt.c 2009-12-11 11:45:21.000000000 +0200
-@@ -0,0 +1,630 @@
-+/*
-+ * drivers/watchdog/ubi32_wdt.c
-+ * Ubicom32 Watchdog Driver
-+ *
-+ * Originally based on softdog.c
-+ * Copyright 2006-2007 Analog Devices Inc.
-+ * Copyright 2006-2007 Michele d'Amico
-+ * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/timer.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/uaccess.h>
-+#include <asm/ip5000.h>
-+
-+#define WATCHDOG_NAME "ubi32-wdt"
-+#define PFX WATCHDOG_NAME ": "
-+
-+#define OSC1_FREQ 12000000
-+#define WATCHDOG_SEC_TO_CYC(x) (OSC1_FREQ * (x))
-+#define WATCHDOG_MAX_SEC (0xffffffff / OSC1_FREQ)
-+
-+#define MIN_PROCESSOR_ADDRESS 0x03000000
-+
-+static DEFINE_SPINLOCK(ubi32_wdt_spinlock);
-+
-+#define WATCHDOG_TIMEOUT 20
-+
-+#if defined(CONFIG_WATCHDOG_NOWAYOUT)
-+#define WATCHDOG_NOWAYOUT 1
-+#else
-+#define WATCHDOG_NOWAYOUT 0
-+#endif
-+
-+static unsigned int timeout = WATCHDOG_TIMEOUT;
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+static struct watchdog_info ubi32_wdt_info;
-+static unsigned long open_check;
-+static char expect_close;
-+
-+#if !defined(CONFIG_SMP)
-+#define UBI32_WDT_LOCK(lock, flags) local_irq_save(flags)
-+#define UBI32_WDT_UNLOCK(lock, flags) local_irq_restore(flags)
-+#define UBI32_WDT_LOCK_CHECK()
-+#else
-+#define UBI32_WDT_LOCK(lock, flags) spin_lock_irqsave((lock), (flags));
-+#define UBI32_WDT_UNLOCK(lock, flags) spin_unlock_irqrestore((lock), (flags));
-+#define UBI32_WDT_LOCK_CHECK() BUG_ON(!spin_is_locked(&ubi32_wdt_spinlock));
-+#endif
-+
-+/*
-+ * ubi32_wdt_remaining()
-+ * Return the approximate number of seconds remaining
-+ */
-+static int ubi32_wdt_remaining(void)
-+{
-+ int compare;
-+ int curr;
-+
-+ UBI32_WDT_LOCK_CHECK();
-+
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
-+ compare = ubicom32_read_reg(&UBICOM32_IO_TIMER->wdcom);
-+ curr = ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval);
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
-+ return (compare - curr) / OSC1_FREQ;
-+
-+}
-+
-+/*
-+ * ubi32_wdt_keepalive()
-+ * Keep the Userspace Watchdog Alive
-+ *
-+ * The Userspace watchdog got a KeepAlive: schedule the next timeout.
-+ */
-+static int ubi32_wdt_keepalive(void)
-+{
-+ UBI32_WDT_LOCK_CHECK();
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcom,
-+ ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval)
-+ + WATCHDOG_SEC_TO_CYC(timeout));
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_stop()
-+ * Stop the on-chip Watchdog
-+ */
-+static int ubi32_wdt_stop(void)
-+{
-+ UBI32_WDT_LOCK_CHECK();
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcfg, TIMER_WATCHDOG_DISABLE);
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_start()
-+ * Start the on-chip Watchdog
-+ */
-+static int ubi32_wdt_start(void)
-+{
-+ UBI32_WDT_LOCK_CHECK();
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcom,
-+ ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval)
-+ + WATCHDOG_SEC_TO_CYC(timeout));
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcfg, ~TIMER_WATCHDOG_DISABLE);
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_running()
-+ * Return true if the watchdog is configured
-+ */
-+static int ubi32_wdt_running(void)
-+{
-+ int enabled;
-+
-+ UBI32_WDT_LOCK_CHECK();
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
-+ enabled = ubicom32_read_reg(&UBICOM32_IO_TIMER->wdcfg) == ~TIMER_WATCHDOG_DISABLE;
-+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
-+ return enabled;
-+}
-+
-+/*
-+ * ubi32_wdt_set_timeout()
-+ * Set the Userspace Watchdog timeout
-+ *
-+ * - @t: new timeout value (in seconds)
-+ */
-+static int ubi32_wdt_set_timeout(unsigned long t)
-+{
-+ UBI32_WDT_LOCK_CHECK();
-+
-+ if (t > WATCHDOG_MAX_SEC) {
-+ printk(KERN_WARNING PFX "request to large: %ld [1-%d] sec)\n", t, WATCHDOG_MAX_SEC);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * If we are running, then reset the time value so
-+ * that the new value has an immediate effect.
-+ */
-+ timeout = t;
-+ if (ubi32_wdt_running()) {
-+ ubi32_wdt_keepalive();
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_open()
-+ * Open the Device
-+ */
-+static int ubi32_wdt_open(struct inode *inode, struct file *file)
-+{
-+ unsigned long flags;
-+
-+ if (test_and_set_bit(0, &open_check))
-+ return -EBUSY;
-+
-+ if (nowayout)
-+ __module_get(THIS_MODULE);
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_start();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * ubi32_wdt_close()
-+ * Close the Device
-+ */
-+static int ubi32_wdt_release(struct inode *inode, struct file *file)
-+{
-+ unsigned long flags;
-+
-+ /*
-+ * If we don't expect a close, then the watchdog continues
-+ * even though the device is closed. The caller will have
-+ * a full timeout value to reopen the device and continue
-+ * stroking it.
-+ */
-+ if (expect_close != 42) {
-+ printk(KERN_CRIT PFX
-+ "Unexpected close, not stopping watchdog!\n");
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_keepalive();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ } else {
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_stop();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ }
-+
-+ expect_close = 0;
-+ clear_bit(0, &open_check);
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_write()
-+ * Write to Device
-+ *
-+ * If the user writes nothing, nothing happens.
-+ * If the user writes a V, then we expect a close and allow a release.
-+ * If the user writes anything else, it is ignored.
-+ */
-+static ssize_t ubi32_wdt_write(struct file *file, const char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ size_t i;
-+ unsigned long flags;
-+
-+ /*
-+ * Every write resets the expect_close. The last write
-+ * must be a V to allow shutdown on close.
-+ */
-+ expect_close = 0;
-+
-+ /*
-+ * Empty writes still ping.
-+ */
-+ if (!len) {
-+ goto ping;
-+ }
-+
-+ /*
-+ * If nowayout is set, it does not matter if the caller
-+ * is trying to send the magic 'V' we will not allow a
-+ * close to stop us.
-+ */
-+ if (nowayout) {
-+ goto ping;
-+ }
-+
-+ /*
-+ * See if the program wrote a 'V' and if so disable
-+ * the watchdog on release.
-+ */
-+ for (i = 0; i < len; i++) {
-+ char c;
-+ if (get_user(c, data + i)) {
-+ return -EFAULT;
-+ }
-+
-+ if (c == 'V') {
-+ expect_close = 42;
-+ }
-+ }
-+
-+ping:
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_keepalive();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ return len;
-+}
-+
-+/*
-+ * ubi32_wdt_ioctl()
-+ * Query the watchdog device.
-+ *
-+ * Query basic information from the device or ping it, as outlined by the
-+ * watchdog API.
-+ */
-+static long ubi32_wdt_ioctl(struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ if (copy_to_user(argp, &ubi32_wdt_info, sizeof(ubi32_wdt_info))) {
-+ return -EFAULT;
-+ }
-+ return 0;
-+
-+ case WDIOC_GETSTATUS: {
-+ unsigned long flags;
-+ int running;
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ running = ubi32_wdt_running();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ return running;
-+ }
-+
-+ case WDIOC_GETBOOTSTATUS:
-+ return ubicom32_get_reset_reason();
-+
-+ case WDIOC_SETOPTIONS: {
-+ unsigned long flags;
-+ int options, ret = -EINVAL;
-+
-+ /*
-+ * The sample application does not pass a pointer
-+ * but directly passes a value of 1 or 2; however
-+ * all of the implementations (and thus probably
-+ * the real applications) pass a pointer to a value.
-+ *
-+ * It should be noted that WDIOC_SETOPTIONS is defined as
-+ * _IOR(WATCHDOG_IOCTL_BASE, 4, int), which means
-+ * that it should be an int and NOT a pointer.
-+ *
-+ * TODO: Examine this code for future chips.
-+ * TODO: Report the sample code defect.
-+ */
-+ if ((int)p < MIN_PROCESSOR_ADDRESS) {
-+ options = (int)p;
-+ } else {
-+ if (get_user(options, p))
-+ return -EFAULT;
-+ }
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ if (options & WDIOS_DISABLECARD) {
-+ ubi32_wdt_stop();
-+ ret = 0;
-+ }
-+ if (options & WDIOS_ENABLECARD) {
-+ ubi32_wdt_start();
-+ ret = 0;
-+ }
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ return ret;
-+ }
-+
-+ case WDIOC_KEEPALIVE: {
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_keepalive();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ return 0;
-+ }
-+
-+ case WDIOC_SETTIMEOUT: {
-+ int new_timeout;
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ if (get_user(new_timeout, p))
-+ return -EFAULT;
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ret = ubi32_wdt_set_timeout(new_timeout);
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ return ret;
-+
-+ }
-+
-+ case WDIOC_GETTIMEOUT:
-+ return put_user(timeout, p);
-+
-+ case WDIOC_GETTIMELEFT: {
-+ unsigned long flags;
-+ int remaining = 0;
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ remaining = ubi32_wdt_remaining();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ return put_user(remaining, p);
-+ }
-+
-+ default:
-+ return -ENOTTY;
-+ }
-+}
-+
-+/*
-+ * ubi32_wdt_notify_sys()
-+ * Notification callback function for system events.
-+ *
-+ * Turn off the watchdog during a SYS_DOWN or SYS_HALT.
-+ */
-+static int ubi32_wdt_notify_sys(struct notifier_block *this,
-+ unsigned long code, void *unused)
-+{
-+ if (code == SYS_DOWN || code == SYS_HALT) {
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_stop();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ }
-+
-+ return NOTIFY_DONE;
-+}
-+
-+#ifdef CONFIG_PM
-+static int state_before_suspend;
-+
-+/*
-+ * ubi32_wdt_suspend()
-+ * suspend the watchdog
-+ *
-+ * Remember if the watchdog was running and stop it.
-+ */
-+static int ubi32_wdt_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ unsigned long flags;
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ state_before_suspend = ubi32_wdt_running();
-+ ubi32_wdt_stop();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_resume()
-+ * Resume the watchdog
-+ *
-+ * If the watchdog was running, turn it back on.
-+ */
-+static int ubi32_wdt_resume(struct platform_device *pdev)
-+{
-+ if (state_before_suspend) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ubi32_wdt_set_timeout(timeout);
-+ ubi32_wdt_start();
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ }
-+
-+ return 0;
-+}
-+#else
-+# define ubi32_wdt_suspend NULL
-+# define ubi32_wdt_resume NULL
-+#endif
-+
-+static const struct file_operations ubi32_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = ubi32_wdt_write,
-+ .unlocked_ioctl = ubi32_wdt_ioctl,
-+ .open = ubi32_wdt_open,
-+ .release = ubi32_wdt_release,
-+};
-+
-+static struct miscdevice ubi32_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &ubi32_wdt_fops,
-+};
-+
-+static struct watchdog_info ubi32_wdt_info = {
-+ .identity = "Ubicom32 Watchdog",
-+ .options = WDIOF_SETTIMEOUT |
-+ WDIOF_KEEPALIVEPING |
-+ WDIOF_MAGICCLOSE,
-+};
-+
-+static struct notifier_block ubi32_wdt_notifier = {
-+ .notifier_call = ubi32_wdt_notify_sys,
-+};
-+
-+/*
-+ * ubi32_wdt_probe()
-+ * Probe/register the watchdog module
-+ *
-+ * Registers the misc device and notifier handler. Actual device
-+ * initialization is handled by ubi32_wdt_open().
-+ */
-+static int __devinit ubi32_wdt_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = register_reboot_notifier(&ubi32_wdt_notifier);
-+ if (ret) {
-+ printk(KERN_ERR PFX
-+ "cannot register reboot notifier (err=%d)\n", ret);
-+ return ret;
-+ }
-+
-+ ret = misc_register(&ubi32_wdt_miscdev);
-+ if (ret) {
-+ printk(KERN_ERR PFX
-+ "cannot register miscdev on minor=%d (err=%d)\n",
-+ WATCHDOG_MINOR, ret);
-+ unregister_reboot_notifier(&ubi32_wdt_notifier);
-+ return ret;
-+ }
-+
-+ printk(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
-+ timeout, nowayout);
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_remove()
-+ * Uninstall the module
-+ *
-+ * Unregisters the misc device and notifier handler. Actual device
-+ * deinitialization is handled by ubi32_wdt_close().
-+ */
-+static int __devexit ubi32_wdt_remove(struct platform_device *pdev)
-+{
-+ misc_deregister(&ubi32_wdt_miscdev);
-+ unregister_reboot_notifier(&ubi32_wdt_notifier);
-+ return 0;
-+}
-+
-+static struct platform_device *ubi32_wdt_device;
-+
-+static struct platform_driver ubi32_wdt_driver = {
-+ .probe = ubi32_wdt_probe,
-+ .remove = __devexit_p(ubi32_wdt_remove),
-+ .suspend = ubi32_wdt_suspend,
-+ .resume = ubi32_wdt_resume,
-+ .driver = {
-+ .name = WATCHDOG_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*
-+ * ubi32_wdt_init()
-+ * Initialize the watchdog.
-+ *
-+ * Checks the module params and registers the platform device & driver.
-+ * Real work is in the platform probe function.
-+ */
-+static int __init ubi32_wdt_init(void)
-+{
-+ unsigned long flags;
-+ int ret;
-+
-+ /*
-+ * Check that the timeout value is within range
-+ */
-+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
-+ ret = ubi32_wdt_set_timeout(timeout);
-+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
-+ if (ret) {
-+ return ret;
-+ }
-+
-+ /*
-+ * Since this is an on-chip device and needs no board-specific
-+ * resources, we'll handle all the platform device stuff here.
-+ */
-+ ret = platform_driver_register(&ubi32_wdt_driver);
-+ if (ret) {
-+ printk(KERN_ERR PFX "unable to register driver\n");
-+ return ret;
-+ }
-+
-+ ubi32_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
-+ if (IS_ERR(ubi32_wdt_device)) {
-+ printk(KERN_ERR PFX "unable to register device\n");
-+ platform_driver_unregister(&ubi32_wdt_driver);
-+ return PTR_ERR(ubi32_wdt_device);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * ubi32_wdt_exit()
-+ * Deinitialize module
-+ *
-+ * Back out the platform device & driver steps. Real work is in the
-+ * platform remove function.
-+ */
-+static void __exit ubi32_wdt_exit(void)
-+{
-+ platform_device_unregister(ubi32_wdt_device);
-+ platform_driver_unregister(&ubi32_wdt_driver);
-+}
-+
-+module_init(ubi32_wdt_init);
-+module_exit(ubi32_wdt_exit);
-+
-+MODULE_AUTHOR("Sol Kavy<sol@ubicom.com>");
-+MODULE_DESCRIPTION("Ubicom32 Watchdog Device Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+
-+module_param(timeout, uint, 0);
-+MODULE_PARM_DESC(timeout,
-+ "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default="
-+ __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
-+
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout,
-+ "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-diff -ruN linux-2.6.30.10/fs/binfmt_flat.c linux-2.6.30.10-ubi/fs/binfmt_flat.c
---- linux-2.6.30.10/fs/binfmt_flat.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/fs/binfmt_flat.c 2009-12-11 11:45:21.000000000 +0200
-@@ -67,6 +67,11 @@
- #define FLAT_DATA_ALIGN (sizeof(void *))
- #endif
-
-+#ifndef ARCH_FLAT_ALIGN
-+#undef FLAT_DATA_ALIGN
-+#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN
-+#endif
-+
- #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
- #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
-
-@@ -436,6 +441,7 @@
- loff_t fpos;
- unsigned long start_code, end_code;
- int ret;
-+ int flush_happened = 0;
-
- hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
- inode = bprm->file->f_path.dentry->d_inode;
-@@ -521,6 +527,7 @@
-
- /* OK, This is the point of no return */
- set_personality(PER_LINUX_32BIT);
-+ flush_happened = 1;
- }
-
- /*
-@@ -535,6 +542,12 @@
- * it all together.
- */
- if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
-+
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ printk("Unable to mmap rom with ARCH alignment requirements\n");
-+ ret = -ENOEXEC;
-+ goto err;
-+#endif
- /*
- * this should give us a ROM ptr, but if it doesn't we don't
- * really care
-@@ -553,7 +566,7 @@
- goto err;
- }
-
-- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
-+ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
- len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- realdatastart = do_mmap(0, 0, len,
-@@ -572,6 +585,7 @@
- datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
- FLAT_DATA_ALIGN);
-+ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
-
- DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
- (int)(data_len + bss_len + stack_len), (int)datapos);
-@@ -600,7 +614,11 @@
- memp_size = len;
- } else {
-
-- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
-+ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ /* Reserve space for the text alignment. */
-+ len += FLAT_DATA_ALIGN;
-+#endif
- len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- textpos = do_mmap(0, 0, len,
-@@ -616,10 +634,17 @@
- goto err;
- }
-
-+ memp = textpos;
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr);
-+#endif
- realdatastart = textpos + ntohl(hdr->data_start);
- datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
- FLAT_DATA_ALIGN);
-+// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
-+// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
-+// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
-
- reloc = (unsigned long *)
- (datapos + (ntohl(hdr->reloc_start) - text_len));
-@@ -659,7 +684,7 @@
- }
- if (result >= (unsigned long)-4096) {
- printk("Unable to read code+data+bss, errno %d\n",(int)-result);
-- do_munmap(current->mm, textpos, text_len + data_len + extra +
-+ do_munmap(current->mm, memp, text_len + data_len + extra +
- MAX_SHARED_LIBS * sizeof(unsigned long));
- ret = result;
- goto err;
-@@ -672,6 +697,9 @@
-
- /* The main program needs a little extra setup in the task structure */
- start_code = textpos + sizeof (struct flat_hdr);
-+#ifdef ARCH_FLAT_ALIGN_TEXT
-+ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code);
-+#endif
- end_code = textpos + text_len;
- if (id == 0) {
- current->mm->start_code = start_code;
-@@ -800,6 +828,13 @@
-
- return 0;
- err:
-+ if (flush_happened) {
-+ /*
-+ * The parent process has already started running. We cannot allow the child to return back to user space
-+ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
-+ */
-+ do_exit(SIGTERM);
-+ }
- return ret;
- }
-
-diff -ruN linux-2.6.30.10/fs/Kconfig.binfmt linux-2.6.30.10-ubi/fs/Kconfig.binfmt
---- linux-2.6.30.10/fs/Kconfig.binfmt 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/fs/Kconfig.binfmt 2009-12-11 11:45:21.000000000 +0200
-@@ -30,7 +30,7 @@
- config BINFMT_ELF_FDPIC
- bool "Kernel support for FDPIC ELF binaries"
- default y
-- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
-+ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
- help
- ELF FDPIC binaries are based on ELF, but allow the individual load
- segments of a binary to be located in memory independently of each
-diff -ruN linux-2.6.30.10/include/asm-generic/resource.h linux-2.6.30.10-ubi/include/asm-generic/resource.h
---- linux-2.6.30.10/include/asm-generic/resource.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/asm-generic/resource.h 2009-12-11 11:45:23.000000000 +0200
-@@ -69,13 +69,16 @@
- /*
- * boot-time rlimit defaults for the init task:
- */
-+#ifndef CONFIG_ELF_CORE
-+#define CONFIG_USER_ELF_CORE_SIZE 0
-+#endif
- #define INIT_RLIMITS \
- { \
- [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \
-- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \
-+ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \
- [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \
- [RLIMIT_NPROC] = { 0, 0 }, \
- [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \
-diff -ruN linux-2.6.30.10/include/linux/elf-em.h linux-2.6.30.10-ubi/include/linux/elf-em.h
---- linux-2.6.30.10/include/linux/elf-em.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/linux/elf-em.h 2009-12-11 11:45:23.000000000 +0200
-@@ -41,6 +41,7 @@
- * up with a final number.
- */
- #define EM_ALPHA 0x9026
-+#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
-
- /* Bogus old v850 magic number, used by old tools. */
- #define EM_CYGNUS_V850 0x9080
-diff -ruN linux-2.6.30.10/include/linux/fb.h linux-2.6.30.10-ubi/include/linux/fb.h
---- linux-2.6.30.10/include/linux/fb.h 2009-12-14 12:16:53.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/linux/fb.h 2009-12-14 12:16:56.000000000 +0200
-@@ -151,6 +151,10 @@
- #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
- #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
-
-+#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */
-+#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */
-+#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */
-+
- struct fb_fix_screeninfo {
- char id[16]; /* identification string eg "TT Builtin" */
- unsigned long smem_start; /* Start of frame buffer mem */
-diff -ruN linux-2.6.30.10/include/linux/if_ppp.h linux-2.6.30.10-ubi/include/linux/if_ppp.h
---- linux-2.6.30.10/include/linux/if_ppp.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/linux/if_ppp.h 2009-12-11 11:45:23.000000000 +0200
-@@ -114,14 +114,14 @@
- __u16 tunnel_id; /* redundant */
- __u16 session_id; /* if zero, get tunnel stats */
- __u32 using_ipsec:1; /* valid only for session_id == 0 */
-- aligned_u64 tx_packets;
-- aligned_u64 tx_bytes;
-- aligned_u64 tx_errors;
-- aligned_u64 rx_packets;
-- aligned_u64 rx_bytes;
-- aligned_u64 rx_seq_discards;
-- aligned_u64 rx_oos_packets;
-- aligned_u64 rx_errors;
-+ __u64 tx_packets;
-+ __u64 tx_bytes;
-+ __u64 tx_errors;
-+ __u64 rx_packets;
-+ __u64 rx_bytes;
-+ __u64 rx_seq_discards;
-+ __u64 rx_oos_packets;
-+ __u64 rx_errors;
- };
-
- #define ifr__name b.ifr_ifrn.ifrn_name
-diff -ruN linux-2.6.30.10/include/linux/oprofile.h linux-2.6.30.10-ubi/include/linux/oprofile.h
---- linux-2.6.30.10/include/linux/oprofile.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/linux/oprofile.h 2009-12-11 11:45:23.000000000 +0200
-@@ -99,6 +99,8 @@
- */
- void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel);
-+void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
-+ unsigned long event, int is_kernel, int cpu);
-
- /* Use this instead when the PC value is not from the regs. Doesn't
- * backtrace. */
-diff -ruN linux-2.6.30.10/include/linux/serial_core.h linux-2.6.30.10-ubi/include/linux/serial_core.h
---- linux-2.6.30.10/include/linux/serial_core.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/linux/serial_core.h 2009-12-11 11:45:23.000000000 +0200
-@@ -167,6 +167,9 @@
- /* MAX3100 */
- #define PORT_MAX3100 86
-
-+/* Ubicom32 */
-+#define PORT_UBI32_UARTTIO 87
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
-diff -ruN linux-2.6.30.10/include/linux/slab.h linux-2.6.30.10-ubi/include/linux/slab.h
---- linux-2.6.30.10/include/linux/slab.h 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/include/linux/slab.h 2009-12-11 11:45:23.000000000 +0200
-@@ -317,4 +317,14 @@
- return kmalloc_node(size, flags | __GFP_ZERO, node);
- }
-
-+struct kmem_cache_size_info {
-+ unsigned short page;
-+ unsigned short order;
-+};
-+
-+/*
-+ * get info on all the memory allocated by slab for this named cache
-+ */
-+extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data);
-+
- #endif /* _LINUX_SLAB_H */
-diff -ruN linux-2.6.30.10/init/Kconfig linux-2.6.30.10-ubi/init/Kconfig
---- linux-2.6.30.10/init/Kconfig 2009-12-14 13:00:08.000000000 +0200
-+++ linux-2.6.30.10-ubi/init/Kconfig 2009-12-14 13:00:11.000000000 +0200
-@@ -865,6 +865,12 @@
- help
- Enable support for generating core dumps. Disabling saves about 4k.
-
-+config USER_ELF_CORE_SIZE
-+ int "user core dump size (10MB to 32MB)"
-+ range 10485760 33554432
-+ default 16777216
-+ depends on ELF_CORE
-+
- config PCSPKR_PLATFORM
- bool "Enable PC-Speaker support" if EMBEDDED
- depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
-diff -ruN linux-2.6.30.10/kernel/module.c linux-2.6.30.10-ubi/kernel/module.c
---- linux-2.6.30.10/kernel/module.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/kernel/module.c 2009-12-11 11:45:24.000000000 +0200
-@@ -2688,6 +2688,9 @@
- /* Used by oprofile and other similar tools. */
- seq_printf(m, " 0x%p", mod->module_core);
-
-+#ifdef ARCH_PROC_MODULES_EXTRA
-+ ARCH_PROC_MODULES_EXTRA(m, mod);
-+#endif
- /* Taints info */
- if (mod->taints)
- seq_printf(m, " %s", module_flags(mod, buf));
-@@ -2840,8 +2843,12 @@
- printk("Modules linked in:");
- /* Most callers should already have preempt disabled, but make sure */
- preempt_disable();
-- list_for_each_entry_rcu(mod, &modules, list)
-+ list_for_each_entry_rcu(mod, &modules, list) {
- printk(" %s%s", mod->name, module_flags(mod, buf));
-+#ifdef ARCH_OOPS_MODULE_EXTRA
-+ ARCH_OOPS_MODULE_EXTRA(mod);
-+#endif
-+ }
- preempt_enable();
- if (last_unloaded_module[0])
- printk(" [last unloaded: %s]", last_unloaded_module);
-diff -ruN linux-2.6.30.10/kernel/sched_clock.c linux-2.6.30.10-ubi/kernel/sched_clock.c
---- linux-2.6.30.10/kernel/sched_clock.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/kernel/sched_clock.c 2009-12-11 11:45:24.000000000 +0200
-@@ -38,8 +38,7 @@
- */
- unsigned long long __attribute__((weak)) sched_clock(void)
- {
-- return (unsigned long long)(jiffies - INITIAL_JIFFIES)
-- * (NSEC_PER_SEC / HZ);
-+ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
- }
-
- static __read_mostly int sched_clock_running;
-diff -ruN linux-2.6.30.10/lib/Kconfig.debug linux-2.6.30.10-ubi/lib/Kconfig.debug
---- linux-2.6.30.10/lib/Kconfig.debug 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/lib/Kconfig.debug 2009-12-11 11:45:24.000000000 +0200
-@@ -621,7 +621,7 @@
- bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || M68KNOMMU || FRV || UML || \
-- AVR32 || SUPERH || BLACKFIN || MN10300) || \
-+ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \
- ARCH_WANT_FRAME_POINTERS
- default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
- help
-diff -ruN linux-2.6.30.10/mm/Makefile linux-2.6.30.10-ubi/mm/Makefile
---- linux-2.6.30.10/mm/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/mm/Makefile 2009-12-11 11:45:24.000000000 +0200
-@@ -38,3 +38,5 @@
- endif
- obj-$(CONFIG_QUICKLIST) += quicklist.o
- obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
-+
-+CFLAGS_slab.o := $(PROFILING) -O2
-diff -ruN linux-2.6.30.10/mm/slab.c linux-2.6.30.10-ubi/mm/slab.c
---- linux-2.6.30.10/mm/slab.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/mm/slab.c 2009-12-11 11:45:24.000000000 +0200
-@@ -4100,6 +4100,68 @@
-
- #ifdef CONFIG_SLABINFO
-
-+
-+/*
-+ * get info on all the memory allocated by slab for this named cache
-+ */
-+int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data)
-+{
-+ int res = 0;
-+ int found = 0;
-+ int node;
-+ struct kmem_cache *cachep;
-+ struct kmem_list3 *l3;
-+ struct slab *slabp;
-+
-+ /* Find the cache in the chain of caches. */
-+ mutex_lock(&cache_chain_mutex);
-+ list_for_each_entry(cachep, &cache_chain, next) {
-+ if (strcmp(cachep->name, name) == 0) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ mutex_unlock(&cache_chain_mutex);
-+ if (!found) {
-+ return 0;
-+ }
-+ for_each_online_node(node) {
-+ l3 = cachep->nodelists[node];
-+ if (!l3)
-+ continue;
-+ if (res >= max_data)
-+ break;
-+ check_irq_on();
-+ spin_lock_irq(&l3->list_lock);
-+
-+ list_for_each_entry(slabp, &l3->slabs_full, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+ list_for_each_entry(slabp, &l3->slabs_partial, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+ list_for_each_entry(slabp, &l3->slabs_free, list) {
-+ if (res >= max_data)
-+ break;
-+ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
-+ data[res].order = cachep->gfporder;
-+ res++;
-+ }
-+
-+ spin_unlock_irq(&l3->list_lock);
-+ }
-+
-+ return res;
-+}
-+
- static void print_slabinfo_header(struct seq_file *m)
- {
- /*
-diff -ruN linux-2.6.30.10/scripts/mod/file2alias.c linux-2.6.30.10-ubi/scripts/mod/file2alias.c
---- linux-2.6.30.10/scripts/mod/file2alias.c 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/scripts/mod/file2alias.c 2009-12-11 11:45:24.000000000 +0200
-@@ -774,6 +774,15 @@
- + sym->st_value;
- }
-
-+ /*
-+ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
-+ * and 0 size will break do_table since it adjust size to (size - id_size)
-+ * this is to make sure st_size fall in range.
-+ */
-+ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
-+ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
-+ }
-+
- if (sym_is(symname, "__mod_pci_device_table"))
- do_table(symval, sym->st_size,
- sizeof(struct pci_device_id), "pci",
-diff -ruN linux-2.6.30.10/sound/Kconfig linux-2.6.30.10-ubi/sound/Kconfig
---- linux-2.6.30.10/sound/Kconfig 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/Kconfig 2009-12-11 11:45:24.000000000 +0200
-@@ -82,6 +82,8 @@
-
- source "sound/soc/Kconfig"
-
-+source "sound/ubicom32/Kconfig"
-+
- endif # SND
-
- menuconfig SOUND_PRIME
-diff -ruN linux-2.6.30.10/sound/Makefile linux-2.6.30.10-ubi/sound/Makefile
---- linux-2.6.30.10/sound/Makefile 2009-12-04 08:00:07.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/Makefile 2009-12-11 11:45:24.000000000 +0200
-@@ -6,7 +6,7 @@
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
-diff -ruN linux-2.6.30.10/sound/ubicom32/Kconfig linux-2.6.30.10-ubi/sound/ubicom32/Kconfig
---- linux-2.6.30.10/sound/ubicom32/Kconfig 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/Kconfig 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,42 @@
-+# ALSA Ubicom32 drivers
-+
-+menuconfig SND_UBI32
-+ tristate "Ubicom32 sound devices"
-+ select SND_PCM
-+ default n
-+ help
-+ Say Y here to include support for audio on the Ubicom32 platform.
-+ To compile this driver as a module, say M here: the module will be
-+ called snd_ubi32.
-+
-+if SND_UBI32
-+
-+config SND_UBI32_AUDIO_GENERIC_CAPTURE
-+ bool "Generic Capture Support"
-+ default n
-+ help
-+ Use this option to support ADCs which don't require special drivers.
-+
-+config SND_UBI32_AUDIO_GENERIC
-+ bool "Generic Playback Support"
-+ default n
-+ help
-+ Use this option to support DACs which don't require special drivers.
-+
-+comment "I2C Based Codecs"
-+
-+config SND_UBI32_AUDIO_CS4350
-+ bool "Cirrus Logic CS4350 DAC"
-+ depends on I2C
-+ default n
-+ help
-+ Support for the Cirrus Logic CS4350 DAC.
-+
-+config SND_UBI32_AUDIO_CS4384
-+ bool "Cirrus Logic CS4384 DAC"
-+ depends on I2C
-+ default n
-+ help
-+ Support for the Cirrus Logic CS4384 DAC.
-+
-+endif #SND_UBI32
-diff -ruN linux-2.6.30.10/sound/ubicom32/Makefile linux-2.6.30.10-ubi/sound/ubicom32/Makefile
---- linux-2.6.30.10/sound/ubicom32/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/Makefile 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,41 @@
-+#
-+# sound/ubicom32/Makefile
-+# Makefile for ALSA
-+#
-+# (C) Copyright 2009, Ubicom, Inc.
-+#
-+# This file is part of the Ubicom32 Linux Kernel Port.
-+#
-+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+# it and/or modify it under the terms of the GNU General Public License
-+# as published by the Free Software Foundation, either version 2 of the
-+# License, or (at your option) any later version.
-+#
-+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+# the GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with the Ubicom32 Linux Kernel Port. If not,
-+# see <http://www.gnu.org/licenses/>.
-+#
-+# Ubicom32 implementation derived from (with many thanks):
-+# arch/m68knommu
-+# arch/blackfin
-+# arch/parisc
-+#
-+
-+CFLAGS_ubi32.o += -O2
-+snd-ubi32-pcm-objs := ubi32-pcm.o
-+snd-ubi32-generic-objs := ubi32-generic.o
-+snd-ubi32-generic-capture-objs := ubi32-generic-capture.o
-+snd-ubi32-cs4350-objs := ubi32-cs4350.o
-+snd-ubi32-cs4384-objs := ubi32-cs4384.o
-+
-+# Toplevel Module Dependency
-+obj-$(CONFIG_SND_UBI32) += snd-ubi32-pcm.o
-+obj-$(CONFIG_SND_UBI32_AUDIO_GENERIC) += snd-ubi32-generic.o
-+obj-$(CONFIG_SND_UBI32_AUDIO_GENERIC_CAPTURE) += snd-ubi32-generic-capture.o
-+obj-$(CONFIG_SND_UBI32_AUDIO_CS4350) += snd-ubi32-cs4350.o
-+obj-$(CONFIG_SND_UBI32_AUDIO_CS4384) += snd-ubi32-cs4384.o
-diff -ruN linux-2.6.30.10/sound/ubicom32/ubi32-cs4350.c linux-2.6.30.10-ubi/sound/ubicom32/ubi32-cs4350.c
---- linux-2.6.30.10/sound/ubicom32/ubi32-cs4350.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/ubi32-cs4350.c 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,583 @@
-+/*
-+ * sound/ubicom32/ubi32-cs4350.c
-+ * Interface to ubicom32 virtual audio peripheral - using CS4350 DAC
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/i2c.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <sound/core.h>
-+#include <sound/tlv.h>
-+#include <sound/control.h>
-+#include <sound/pcm.h>
-+#include <sound/initval.h>
-+#include "ubi32.h"
-+
-+#define DRIVER_NAME "snd-ubi32-cs4350"
-+
-+/*
-+ * Module properties
-+ */
-+static const struct i2c_device_id snd_ubi32_cs4350_id[] = {
-+ {"cs4350", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, ubicom32audio_id);
-+
-+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-+
-+/*
-+ * The dB scale for the Cirrus Logic cs4350. The output range is from
-+ * -127.5 dB to 0 dB.
-+ */
-+static const DECLARE_TLV_DB_SCALE(snd_ubi32_cs4350_db, -12750, 50, 0);
-+
-+#define ubi32_cs4350_mute_info snd_ctl_boolean_stereo_info
-+
-+/*
-+ * Private data for cs4350 chip
-+ */
-+struct ubi32_cs4350_priv {
-+ /*
-+ * The current volume settings
-+ */
-+ uint8_t volume[2];
-+
-+ /*
-+ * Bitmask of mutes MSB (unused, ..., unused, right_ch, left_ch) LSB
-+ */
-+ uint8_t mute;
-+
-+ /*
-+ * Lock to protect this struct because callbacks are not atomic.
-+ */
-+ spinlock_t lock;
-+};
-+
-+/*
-+ * The info for the cs4350. The volume currently has one channel,
-+ * and 255 possible settings.
-+ */
-+static int ubi32_cs4350_volume_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 255; // 8 bits in cirrus logic cs4350 volume register
-+ return 0;
-+}
-+
-+static int ubi32_cs4350_volume_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
-+ struct ubi32_cs4350_priv *cs4350_priv;
-+ unsigned long flags;
-+
-+ cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-+
-+ spin_lock_irqsave(&cs4350_priv->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = cs4350_priv->volume[0];
-+ ucontrol->value.integer.value[1] = cs4350_priv->volume[1];
-+
-+ spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ubi32_cs4350_volume_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
-+ struct i2c_client *client = (struct i2c_client *)ubi32_priv->client;
-+ struct ubi32_cs4350_priv *cs4350_priv;
-+ unsigned long flags;
-+ int ret, changed;
-+ char send[2];
-+ uint8_t volume_reg_value_left, volume_reg_value_right;
-+
-+ changed = 0;
-+
-+ cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-+ volume_reg_value_left = 255 - (ucontrol->value.integer.value[0] & 0xFF);
-+ volume_reg_value_right = 255 - (ucontrol->value.integer.value[1] & 0xFF);
-+
-+#if SND_UBI32_DEBUG
-+ snd_printk(KERN_INFO "Setting volume: writing %d,%d to CS4350 volume registers\n", volume_reg_value_left, volume_reg_value_right);
-+#endif
-+ spin_lock_irqsave(&cs4350_priv->lock, flags);
-+
-+ if (cs4350_priv->volume[0] != ucontrol->value.integer.value[0]) {
-+ send[0] = 0x05; // left channel
-+ send[1] = volume_reg_value_left;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
-+ return changed;
-+ }
-+ cs4350_priv->volume[0] = ucontrol->value.integer.value[0];
-+ changed = 1;
-+ }
-+
-+ if (cs4350_priv->volume[1] != ucontrol->value.integer.value[1]) {
-+ send[0] = 0x06; // right channel
-+ send[1] = volume_reg_value_right;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set channel B volume on CS4350\n");
-+ return changed;
-+ }
-+ cs4350_priv->volume[1] = ucontrol->value.integer.value[1];
-+ changed = 1;
-+ }
-+
-+ spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-+
-+ return changed;
-+}
-+
-+static struct snd_kcontrol_new ubi32_cs4350_volume __devinitdata = {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "PCM Playback Volume",
-+ .info = ubi32_cs4350_volume_info,
-+ .get = ubi32_cs4350_volume_get,
-+ .put = ubi32_cs4350_volume_put,
-+ .tlv.p = snd_ubi32_cs4350_db,
-+};
-+
-+static int ubi32_cs4350_mute_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
-+ struct ubi32_cs4350_priv *cs4350_priv;
-+ unsigned long flags;
-+
-+ cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-+
-+ spin_lock_irqsave(&cs4350_priv->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = cs4350_priv->mute & 1;
-+ ucontrol->value.integer.value[1] = (cs4350_priv->mute & (1 << 1)) ? 1 : 0;
-+
-+ spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ubi32_cs4350_mute_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *ubi32_priv = snd_kcontrol_chip(kcontrol);
-+ struct i2c_client *client = (struct i2c_client *)ubi32_priv->client;
-+ struct ubi32_cs4350_priv *cs4350_priv;
-+ unsigned long flags;
-+ int ret, changed;
-+ char send[2];
-+ char recv[1];
-+ uint8_t mute;
-+
-+ changed = 0;
-+
-+ cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-+
-+ spin_lock_irqsave(&cs4350_priv->lock, flags);
-+
-+ if ((cs4350_priv->mute & 1) != ucontrol->value.integer.value[0]) {
-+ send[0] = 0x04;
-+ ret = i2c_master_send(client, send, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed to write to mute register: channel 0\n");
-+ return changed;
-+ }
-+
-+ ret = i2c_master_recv(client, recv, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed to read mute register: channel 0\n");
-+ return changed;
-+ }
-+
-+ mute = recv[0];
-+
-+ if (ucontrol->value.integer.value[0]) {
-+ cs4350_priv->mute |= 1;
-+ mute &= ~(1 << 4);
-+#if SND_UBI32_DEBUG
-+ snd_printk(KERN_INFO "Unmuted channel A\n");
-+#endif
-+ } else {
-+ cs4350_priv->mute &= ~1;
-+ mute |= (1 << 4);
-+#if SND_UBI32_DEBUG
-+ snd_printk(KERN_INFO "Muted channel A\n");
-+#endif
-+ }
-+
-+ send[0] = 0x04;
-+ send[1] = mute;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set channel A mute on CS4350\n");
-+ return changed;
-+ }
-+ changed = 1;
-+ }
-+
-+ if (((cs4350_priv->mute & 2) >> 1) != ucontrol->value.integer.value[1]) {
-+ send[0] = 0x04;
-+ ret = i2c_master_send(client, send, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed to write to mute register: channel 1\n");
-+ return changed;
-+ }
-+
-+ ret = i2c_master_recv(client, recv, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed to read mute register: channel 1\n");
-+ return changed;
-+ }
-+
-+ mute = recv[0];
-+
-+ if (ucontrol->value.integer.value[1]) {
-+ cs4350_priv->mute |= (1 << 1);
-+ mute &= ~(1 << 3);
-+#if SND_UBI32_DEBUG
-+ snd_printk(KERN_INFO "Unmuted channel B\n");
-+#endif
-+ } else {
-+ cs4350_priv->mute &= ~(1 << 1);
-+ mute |= (1 << 3);
-+#if SND_UBI32_DEBUG
-+ snd_printk(KERN_INFO "Muted channel B\n");
-+#endif
-+ }
-+
-+ send[0] = 0x04;
-+ send[1] = mute;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set channel A mute on CS4350\n");
-+ return changed;
-+ }
-+ changed = 1;
-+ }
-+
-+ spin_unlock_irqrestore(&cs4350_priv->lock, flags);
-+
-+ return changed;
-+}
-+
-+static struct snd_kcontrol_new ubi32_cs4350_mute __devinitdata = {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
-+ .name = "PCM Playback Switch",
-+ .info = ubi32_cs4350_mute_info,
-+ .get = ubi32_cs4350_mute_get,
-+ .put = ubi32_cs4350_mute_put,
-+};
-+
-+/*
-+ * snd_ubi32_cs4350_free
-+ * Card private data free function
-+ */
-+void snd_ubi32_cs4350_free(struct snd_card *card)
-+{
-+ struct ubi32_snd_priv *ubi32_priv;
-+ struct ubi32_cs4350_priv *cs4350_priv;
-+
-+ ubi32_priv = card->private_data;
-+ cs4350_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-+ if (cs4350_priv) {
-+ kfree(cs4350_priv);
-+ }
-+}
-+
-+/*
-+ * snd_ubi32_cs4350_dac_init
-+ */
-+static int snd_ubi32_cs4350_dac_init(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+ int ret;
-+ char send[2];
-+ char recv[8];
-+
-+ /*
-+ * Initialize the CS4350 DAC over the I2C interface
-+ */
-+ snd_printk(KERN_INFO "Initializing CS4350 DAC\n");
-+
-+ /*
-+ * Register 0x01: device/revid
-+ */
-+ send[0] = 0x01;
-+ ret = i2c_master_send(client, send, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed 1st attempt to write to CS4350 register 0x01\n");
-+ goto fail;
-+ }
-+ ret = i2c_master_recv(client, recv, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed initial read of CS4350 registers\n");
-+ goto fail;
-+ }
-+ snd_printk(KERN_INFO "CS4350 DAC Device/Rev: %08x\n", recv[0]);
-+
-+ /*
-+ * Register 0x02: Mode control
-+ * I2S DIF[2:0] = 001, no De-Emphasis, Auto speed mode
-+ */
-+ send[0] = 0x02;
-+ send[1] = 0x10;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set CS4350 to I2S mode\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register 0x05/0x06: Volume control
-+ * Channel A volume set to 0 dB
-+ * Channel B volume set to 0 dB
-+ */
-+ send[0] = 0x05;
-+ send[1] = 0x00;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
-+ goto fail;
-+ }
-+
-+ send[0] = 0x06;
-+ send[1] = 0x00;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Make sure the changes took place, this helps verify we are talking to
-+ * the correct chip.
-+ */
-+ send[0] = 0x81;
-+ ret = i2c_master_send(client, send, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed to initiate readback\n");
-+ goto fail;
-+ }
-+
-+ ret = i2c_master_recv(client, recv, 8);
-+ if (ret != 8) {
-+ snd_printk(KERN_ERR "Failed second read of CS4350 registers\n");
-+ goto fail;
-+ }
-+
-+ if ((recv[1] != 0x10) || (recv[4] != 0x00) || (recv[5] != 0x00)) {
-+ snd_printk(KERN_ERR "Failed to initialize CS4350 DAC\n");
-+ goto fail;
-+ }
-+
-+ snd_printk(KERN_INFO "CS4350 DAC Initialized\n");
-+ return 0;
-+
-+fail:
-+ return -ENODEV;
-+}
-+
-+/*
-+ * snd_ubi32_cs4350_i2c_probe
-+ */
-+static int snd_ubi32_cs4350_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+ struct ubi32_cs4350_priv *cs4350_priv;
-+ int err, ret;
-+ struct platform_device *pdev;
-+
-+ pdev = client->dev.platform_data;
-+ if (!pdev) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Initialize the CS4350 DAC
-+ */
-+ ret = snd_ubi32_cs4350_dac_init(client, id);
-+ if (ret < 0) {
-+ /*
-+ * Initialization failed. Propagate the error.
-+ */
-+ return ret;
-+ }
-+
-+ /*
-+ * Create a snd_card structure
-+ */
-+ card = snd_card_new(index, "Ubi32-CS4350", THIS_MODULE, sizeof(struct ubi32_snd_priv));
-+ if (card == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ card->private_free = snd_ubi32_cs4350_free; /* Not sure if correct */
-+ ubi32_priv = card->private_data;
-+
-+ /*
-+ * CS4350 DAC has a minimum sample rate of 30khz and an
-+ * upper limit of 216khz for it's auto-detect.
-+ */
-+ ubi32_priv->min_sample_rate = 30000;
-+ ubi32_priv->max_sample_rate = 216000;
-+
-+ /*
-+ * Initialize the snd_card's private data structure
-+ */
-+ ubi32_priv->card = card;
-+ ubi32_priv->client = client;
-+
-+ /*
-+ * Create our private data structure
-+ */
-+ cs4350_priv = kzalloc(sizeof(struct ubi32_cs4350_priv), GFP_KERNEL);
-+ if (!cs4350_priv) {
-+ snd_card_free(card);
-+ return -ENOMEM;
-+ }
-+ snd_ubi32_priv_set_drv(ubi32_priv, cs4350_priv);
-+ spin_lock_init(&cs4350_priv->lock);
-+
-+ /*
-+ * Initial volume is set to max by probe function
-+ */
-+ cs4350_priv->volume[0] = 0xFF;
-+ cs4350_priv->volume[1] = 0xFF;
-+
-+ /*
-+ * The CS4350 starts off unmuted (bit set = not muted)
-+ */
-+ cs4350_priv->mute = 3;
-+
-+ /*
-+ * Create the new PCM instance
-+ */
-+ err = snd_ubi32_pcm_probe(ubi32_priv, pdev);
-+ if (err < 0) {
-+ snd_card_free(card);
-+ return err; /* What is err? Need to include correct file */
-+ }
-+
-+ strcpy(card->driver, "Ubi32-CS4350");
-+ strcpy(card->shortname, "Ubi32-CS4350");
-+ snprintf(card->longname, sizeof(card->longname),
-+ "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
-+ card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
-+ ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-+
-+ snd_card_set_dev(card, &client->dev);
-+
-+ /*
-+ * Set up the mixer components
-+ */
-+ err = snd_ctl_add(card, snd_ctl_new1(&ubi32_cs4350_volume, ubi32_priv));
-+ if (err) {
-+ snd_printk(KERN_WARNING "Failed to add volume mixer control\n");
-+ }
-+ err = snd_ctl_add(card, snd_ctl_new1(&ubi32_cs4350_mute, ubi32_priv));
-+ if (err) {
-+ snd_printk(KERN_WARNING "Failed to add mute mixer control\n");
-+ }
-+
-+ /*
-+ * Register the sound card
-+ */
-+ if ((err = snd_card_register(card)) != 0) {
-+ snd_printk(KERN_WARNING "snd_card_register error\n");
-+ }
-+
-+ /*
-+ * Store card for access from other methods
-+ */
-+ i2c_set_clientdata(client, card);
-+
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4350_i2c_remove
-+ */
-+static int __devexit snd_ubi32_cs4350_i2c_remove(struct i2c_client *client)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+
-+ card = i2c_get_clientdata(client);
-+
-+ ubi32_priv = card->private_data;
-+ snd_ubi32_pcm_remove(ubi32_priv);
-+
-+ snd_card_free(i2c_get_clientdata(client));
-+ i2c_set_clientdata(client, NULL);
-+
-+ return 0;
-+}
-+
-+/*
-+ * I2C driver description
-+ */
-+static struct i2c_driver snd_ubi32_cs4350_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .id_table = snd_ubi32_cs4350_id,
-+ .probe = snd_ubi32_cs4350_i2c_probe,
-+ .remove = __devexit_p(snd_ubi32_cs4350_i2c_remove),
-+};
-+
-+/*
-+ * Driver init
-+ */
-+static int __init snd_ubi32_cs4350_init(void)
-+{
-+ return i2c_add_driver(&snd_ubi32_cs4350_driver);
-+}
-+module_init(snd_ubi32_cs4350_init);
-+
-+/*
-+ * snd_ubi32_cs4350_exit
-+ */
-+static void __exit snd_ubi32_cs4350_exit(void)
-+{
-+ i2c_del_driver(&snd_ubi32_cs4350_driver);
-+}
-+module_exit(snd_ubi32_cs4350_exit);
-+
-+/*
-+ * Module properties
-+ */
-+MODULE_ALIAS("i2c:" DRIVER_NAME);
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices CS4350");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/sound/ubicom32/ubi32-cs4384.c linux-2.6.30.10-ubi/sound/ubicom32/ubi32-cs4384.c
---- linux-2.6.30.10/sound/ubicom32/ubi32-cs4384.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/ubi32-cs4384.c 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,996 @@
-+/*
-+ * sound/ubicom32/ubi32-cs4384.c
-+ * Interface to ubicom32 virtual audio peripheral - using CS4384 DAC
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/i2c.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <sound/core.h>
-+#include <sound/tlv.h>
-+#include <sound/control.h>
-+#include <sound/pcm.h>
-+#include <sound/initval.h>
-+#include <asm/ip5000.h>
-+#include <asm/gpio.h>
-+#include <asm/audio.h>
-+#include <asm/ubi32-cs4384.h>
-+#include "ubi32.h"
-+
-+#define DRIVER_NAME "snd-ubi32-cs4384"
-+
-+/*
-+ * Module properties
-+ */
-+static const struct i2c_device_id snd_ubi32_cs4384_id[] = {
-+ {"cs4384", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, ubicom32audio_id);
-+
-+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-+
-+/*
-+ * Mixer properties
-+ */
-+enum {
-+ /*
-+ * Be careful of changing the order of these IDs, they
-+ * are used to index the volume array.
-+ */
-+ SND_UBI32_CS4384_FRONT_ID,
-+ SND_UBI32_CS4384_SURROUND_ID,
-+ SND_UBI32_CS4384_CENTER_ID,
-+ SND_UBI32_CS4384_LFE_ID,
-+ SND_UBI32_CS4384_REAR_ID,
-+
-+ /*
-+ * This should be the last ID
-+ */
-+ SND_UBI32_CS4384_LAST_ID,
-+};
-+static const u8_t snd_ubi32_cs4384_ch_ofs[] = {0, 2, 4, 5, 6};
-+
-+static const DECLARE_TLV_DB_SCALE(snd_ubi32_cs4384_db, -12750, 50, 0);
-+
-+#define snd_ubi32_cs4384_info_mute snd_ctl_boolean_stereo_info
-+#define snd_ubi32_cs4384_info_mute_mono snd_ctl_boolean_mono_info
-+
-+/*
-+ * Mixer controls
-+ */
-+static int snd_ubi32_cs4384_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo);
-+static int snd_ubi32_cs4384_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-+static int snd_ubi32_cs4384_put_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-+static int snd_ubi32_cs4384_get_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-+static int snd_ubi32_cs4384_put_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-+
-+/*
-+ * Make sure to update these if the structure below is changed
-+ */
-+#define SND_UBI32_MUTE_CTL_START 5
-+#define SND_UBI32_MUTE_CTL_END 9
-+static struct snd_kcontrol_new snd_ubi32_cs4384_controls[] __devinitdata = {
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Front Playback Volume",
-+ .info = snd_ubi32_cs4384_info_volume,
-+ .get = snd_ubi32_cs4384_get_volume,
-+ .put = snd_ubi32_cs4384_put_volume,
-+ .private_value = SND_UBI32_CS4384_FRONT_ID,
-+ .tlv = {
-+ .p = snd_ubi32_cs4384_db,
-+ },
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Surround Playback Volume",
-+ .info = snd_ubi32_cs4384_info_volume,
-+ .get = snd_ubi32_cs4384_get_volume,
-+ .put = snd_ubi32_cs4384_put_volume,
-+ .private_value = SND_UBI32_CS4384_SURROUND_ID,
-+ .tlv = {
-+ .p = snd_ubi32_cs4384_db,
-+ },
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Center Playback Volume",
-+ .info = snd_ubi32_cs4384_info_volume,
-+ .get = snd_ubi32_cs4384_get_volume,
-+ .put = snd_ubi32_cs4384_put_volume,
-+ .private_value = SND_UBI32_CS4384_CENTER_ID,
-+ .tlv = {
-+ .p = snd_ubi32_cs4384_db,
-+ },
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "LFE Playback Volume",
-+ .info = snd_ubi32_cs4384_info_volume,
-+ .get = snd_ubi32_cs4384_get_volume,
-+ .put = snd_ubi32_cs4384_put_volume,
-+ .private_value = SND_UBI32_CS4384_LFE_ID,
-+ .tlv = {
-+ .p = snd_ubi32_cs4384_db,
-+ },
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Rear Playback Volume",
-+ .info = snd_ubi32_cs4384_info_volume,
-+ .get = snd_ubi32_cs4384_get_volume,
-+ .put = snd_ubi32_cs4384_put_volume,
-+ .private_value = SND_UBI32_CS4384_REAR_ID,
-+ .tlv = {
-+ .p = snd_ubi32_cs4384_db,
-+ },
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Front Playback Switch",
-+ .info = snd_ubi32_cs4384_info_mute,
-+ .get = snd_ubi32_cs4384_get_mute,
-+ .put = snd_ubi32_cs4384_put_mute,
-+ .private_value = SND_UBI32_CS4384_FRONT_ID,
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Surround Playback Switch",
-+ .info = snd_ubi32_cs4384_info_mute,
-+ .get = snd_ubi32_cs4384_get_mute,
-+ .put = snd_ubi32_cs4384_put_mute,
-+ .private_value = SND_UBI32_CS4384_SURROUND_ID,
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Center Playback Switch",
-+ .info = snd_ubi32_cs4384_info_mute_mono,
-+ .get = snd_ubi32_cs4384_get_mute,
-+ .put = snd_ubi32_cs4384_put_mute,
-+ .private_value = SND_UBI32_CS4384_CENTER_ID,
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "LFE Playback Switch",
-+ .info = snd_ubi32_cs4384_info_mute_mono,
-+ .get = snd_ubi32_cs4384_get_mute,
-+ .put = snd_ubi32_cs4384_put_mute,
-+ .private_value = SND_UBI32_CS4384_LFE_ID,
-+ },
-+ {
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
-+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-+ .name = "Rear Playback Switch",
-+ .info = snd_ubi32_cs4384_info_mute,
-+ .get = snd_ubi32_cs4384_get_mute,
-+ .put = snd_ubi32_cs4384_put_mute,
-+ .private_value = SND_UBI32_CS4384_REAR_ID,
-+ },
-+};
-+
-+/*
-+ * Our private data
-+ */
-+struct snd_ubi32_cs4384_priv {
-+ /*
-+ * Array of current volumes
-+ * (L, R, SL, SR, C, LFE, RL, RR)
-+ */
-+ uint8_t volume[8];
-+
-+ /*
-+ * Bitmask of mutes
-+ * MSB (RR, RL, LFE, C, SR, SL, R, L) LSB
-+ */
-+ uint8_t mute;
-+
-+ /*
-+ * Array of controls
-+ */
-+ struct snd_kcontrol *kctls[ARRAY_SIZE(snd_ubi32_cs4384_controls)];
-+
-+ /*
-+ * Lock to protect our card
-+ */
-+ spinlock_t lock;
-+};
-+
-+/*
-+ * snd_ubi32_cs4384_info_volume
-+ */
-+static int snd_ubi32_cs4384_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
-+{
-+ unsigned int id = (unsigned int)kcontrol->private_value;
-+
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ if ((id != SND_UBI32_CS4384_LFE_ID) &&
-+ (id != SND_UBI32_CS4384_CENTER_ID)) {
-+ uinfo->count = 2;
-+ }
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 255;
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_get_volume
-+ */
-+static int snd_ubi32_cs4384_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ unsigned int id = (unsigned int)kcontrol->private_value;
-+ int ch = snd_ubi32_cs4384_ch_ofs[id];
-+ unsigned long flags;
-+
-+ if (id >= SND_UBI32_CS4384_LAST_ID) {
-+ return -EINVAL;
-+ }
-+
-+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
-+
-+ spin_lock_irqsave(&cs4384_priv->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = cs4384_priv->volume[ch];
-+ if ((id != SND_UBI32_CS4384_LFE_ID) &&
-+ (id != SND_UBI32_CS4384_CENTER_ID)) {
-+ ch++;
-+ ucontrol->value.integer.value[1] = cs4384_priv->volume[ch];
-+ }
-+
-+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-+
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_put_volume
-+ */
-+static int snd_ubi32_cs4384_put_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
-+ struct i2c_client *client = (struct i2c_client *)priv->client;
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ unsigned int id = (unsigned int)kcontrol->private_value;
-+ int ch = snd_ubi32_cs4384_ch_ofs[id];
-+ unsigned long flags;
-+ unsigned char send[3];
-+ int nch;
-+ int ret = -EINVAL;
-+
-+ if (id >= SND_UBI32_CS4384_LAST_ID) {
-+ return -EINVAL;
-+ }
-+
-+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
-+
-+ spin_lock_irqsave(&cs4384_priv->lock, flags);
-+
-+ send[0] = 0;
-+ switch (id) {
-+ case SND_UBI32_CS4384_REAR_ID:
-+ send[0] = 0x06;
-+
-+ /*
-+ * Fall through
-+ */
-+
-+ case SND_UBI32_CS4384_SURROUND_ID:
-+ send[0] += 0x03;
-+
-+ /*
-+ * Fall through
-+ */
-+
-+ case SND_UBI32_CS4384_FRONT_ID:
-+ send[0] += 0x8B;
-+ nch = 2;
-+ send[1] = 255 - (ucontrol->value.integer.value[0] & 0xFF);
-+ send[2] = 255 - (ucontrol->value.integer.value[1] & 0xFF);
-+ cs4384_priv->volume[ch++] = send[1];
-+ cs4384_priv->volume[ch] = send[2];
-+ break;
-+
-+ case SND_UBI32_CS4384_LFE_ID:
-+ send[0] = 0x81;
-+
-+ /*
-+ * Fall through
-+ */
-+
-+ case SND_UBI32_CS4384_CENTER_ID:
-+ send[0] += 0x11;
-+ nch = 1;
-+ send[1] = 255 - (ucontrol->value.integer.value[0] & 0xFF);
-+ cs4384_priv->volume[ch] = send[1];
-+ break;
-+
-+ default:
-+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-+ goto done;
-+
-+ }
-+
-+ /*
-+ * Send the volume to the chip
-+ */
-+ nch++;
-+ ret = i2c_master_send(client, send, nch);
-+ if (ret != nch) {
-+ snd_printk(KERN_ERR "Failed to set volume on CS4384\n");
-+ }
-+
-+done:
-+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-+
-+ return ret;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_get_mute
-+ */
-+static int snd_ubi32_cs4384_get_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ unsigned int id = (unsigned int)kcontrol->private_value;
-+ int ch = snd_ubi32_cs4384_ch_ofs[id];
-+ unsigned long flags;
-+
-+ if (id >= SND_UBI32_CS4384_LAST_ID) {
-+ return -EINVAL;
-+ }
-+
-+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
-+
-+ spin_lock_irqsave(&cs4384_priv->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = !(cs4384_priv->mute & (1 << ch));
-+
-+ if ((id != SND_UBI32_CS4384_LFE_ID) &&
-+ (id != SND_UBI32_CS4384_CENTER_ID)) {
-+ ch++;
-+ ucontrol->value.integer.value[1] = !(cs4384_priv->mute & (1 << ch));
-+ }
-+
-+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-+
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_put_mute
-+ */
-+static int snd_ubi32_cs4384_put_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
-+ struct i2c_client *client = (struct i2c_client *)priv->client;
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ unsigned int id = (unsigned int)kcontrol->private_value;
-+ int ch = snd_ubi32_cs4384_ch_ofs[id];
-+ unsigned long flags;
-+ unsigned char send[2];
-+ int ret = -EINVAL;
-+
-+ if (id >= SND_UBI32_CS4384_LAST_ID) {
-+ return -EINVAL;
-+ }
-+
-+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
-+
-+ spin_lock_irqsave(&cs4384_priv->lock, flags);
-+
-+ if (ucontrol->value.integer.value[0]) {
-+ cs4384_priv->mute &= ~(1 << ch);
-+ } else {
-+ cs4384_priv->mute |= (1 << ch);
-+ }
-+
-+ if ((id != SND_UBI32_CS4384_LFE_ID) && (id != SND_UBI32_CS4384_CENTER_ID)) {
-+ ch++;
-+ if (ucontrol->value.integer.value[1]) {
-+ cs4384_priv->mute &= ~(1 << ch);
-+ } else {
-+ cs4384_priv->mute |= (1 << ch);
-+ }
-+ }
-+
-+ /*
-+ * Update the chip's mute reigster
-+ */
-+ send[0] = 0x09;
-+ send[1] = cs4384_priv->mute;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set mute on CS4384\n");
-+ }
-+
-+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-+
-+ return ret;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_mixer
-+ * Setup the mixer controls
-+ */
-+static int __devinit snd_ubi32_cs4384_mixer(struct ubi32_snd_priv *priv)
-+{
-+ struct snd_card *card = priv->card;
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ int i;
-+
-+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
-+ for (i = 0; i < ARRAY_SIZE(snd_ubi32_cs4384_controls); i++) {
-+ int err;
-+
-+ cs4384_priv->kctls[i] = snd_ctl_new1(&snd_ubi32_cs4384_controls[i], priv);
-+ err = snd_ctl_add(card, cs4384_priv->kctls[i]);
-+ if (err) {
-+ snd_printk(KERN_WARNING "Failed to add control %d\n", i);
-+ return err;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_free
-+ * Card private data free function
-+ */
-+void snd_ubi32_cs4384_free(struct snd_card *card)
-+{
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ struct ubi32_snd_priv *ubi32_priv;
-+
-+ ubi32_priv = card->private_data;
-+ cs4384_priv = snd_ubi32_priv_get_drv(ubi32_priv);
-+ if (cs4384_priv) {
-+ kfree(cs4384_priv);
-+ }
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_setup_mclk
-+ */
-+static int snd_ubi32_cs4384_setup_mclk(struct ubi32_cs4384_platform_data *pdata)
-+{
-+ struct ubicom32_io_port *ioa = (struct ubicom32_io_port *)RA;
-+ struct ubicom32_io_port *ioc = (struct ubicom32_io_port *)RC;
-+ struct ubicom32_io_port *iod = (struct ubicom32_io_port *)RD;
-+ struct ubicom32_io_port *ioe = (struct ubicom32_io_port *)RE;
-+ struct ubicom32_io_port *ioh = (struct ubicom32_io_port *)RH;
-+ unsigned int ctl0;
-+ unsigned int ctlx;
-+ unsigned int div;
-+
-+ div = pdata->mclk_entries[0].div;
-+
-+ ctl0 = (1 << 13);
-+ ctlx = ((div - 1) << 16) | (div / 2);
-+
-+ switch (pdata->mclk_src) {
-+ case UBI32_CS4384_MCLK_PWM_0:
-+ ioc->function |= 2;
-+ ioc->ctl0 |= ctl0;
-+ ioc->ctl1 = ctlx;
-+ if (!ioa->function) {
-+ ioa->function = 3;
-+ }
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_PWM_1:
-+ ioc->function |= 2;
-+ ioc->ctl0 |= ctl0 << 16;
-+ ioc->ctl2 = ctlx;
-+ if (!ioe->function) {
-+ ioe->function = 3;
-+ }
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_PWM_2:
-+ ioh->ctl0 |= ctl0;
-+ ioh->ctl1 = ctlx;
-+ if (!iod->function) {
-+ iod->function = 3;
-+ }
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_CLKDIV_1:
-+ ioa->gpio_mask &= (1 << 7);
-+ ioa->ctl1 &= ~(0x7F << 14);
-+ ioa->ctl1 |= ((div - 1) << 14);
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_OTHER:
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_set_rate
-+ */
-+static int snd_ubi32_cs4384_set_rate(struct ubi32_snd_priv *priv, int rate)
-+{
-+ struct ubi32_cs4384_platform_data *cpd = priv->pdata->priv_data;
-+ struct ubicom32_io_port *ioa = (struct ubicom32_io_port *)RA;
-+ struct ubicom32_io_port *ioc = (struct ubicom32_io_port *)RC;
-+ struct ubicom32_io_port *ioh = (struct ubicom32_io_port *)RH;
-+ unsigned int ctl;
-+ unsigned int div = 0;
-+ const u16_t mult[] = {64, 96, 128, 192, 256, 384, 512, 768, 1024};
-+ int i;
-+ int j;
-+
-+
-+ for (i = 0; i < sizeof(mult) / sizeof(u16_t); i++) {
-+ for (j = 0; j < cpd->n_mclk; j++) {
-+ if (((unsigned int)rate * (unsigned int)mult[i]) ==
-+ cpd->mclk_entries[j].rate) {
-+ div = cpd->mclk_entries[j].div;
-+ break;
-+ }
-+ }
-+ }
-+
-+ ctl = ((div - 1) << 16) | (div / 2);
-+
-+ switch (cpd->mclk_src) {
-+ case UBI32_CS4384_MCLK_PWM_0:
-+ ioc->ctl1 = ctl;
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_PWM_1:
-+ ioc->ctl2 = ctl;
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_PWM_2:
-+ ioh->ctl1 = ctl;
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_CLKDIV_1:
-+ ioa->ctl1 &= ~(0x7F << 14);
-+ ioa->ctl1 |= ((div - 1) << 14);
-+ return 0;
-+
-+ case UBI32_CS4384_MCLK_OTHER:
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_set_channels
-+ * Mute unused channels
-+ */
-+static int snd_ubi32_cs4384_set_channels(struct ubi32_snd_priv *priv, int channels)
-+{
-+ struct i2c_client *client = (struct i2c_client *)priv->client;
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+ unsigned char send[2];
-+ int ret;
-+ int i;
-+ unsigned long flags;
-+
-+ /*
-+ * Only support 0, 2, 4, 6, 8 channels
-+ */
-+ if ((channels > 8) || (channels & 1)) {
-+ return -EINVAL;
-+ }
-+
-+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
-+ spin_lock_irqsave(&cs4384_priv->lock, flags);
-+
-+ /*
-+ * Address 09h, Mute control
-+ */
-+ send[0] = 0x09;
-+ send[1] = (unsigned char)(0xFF << channels);
-+
-+ ret = i2c_master_send(client, send, 2);
-+
-+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
-+
-+ /*
-+ * Notify the system that we changed the mutes
-+ */
-+ cs4384_priv->mute = (unsigned char)(0xFF << channels);
-+
-+ for (i = SND_UBI32_MUTE_CTL_START; i < SND_UBI32_MUTE_CTL_END; i++) {
-+ snd_ctl_notify(priv->card, SNDRV_CTL_EVENT_MASK_VALUE,
-+ &cs4384_priv->kctls[i]->id);
-+ }
-+
-+ if (ret != 2) {
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_dac_init
-+ */
-+static int snd_ubi32_cs4384_dac_init(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+ int ret;
-+ unsigned char send[2];
-+ unsigned char recv[2];
-+
-+ /*
-+ * Initialize the CS4384 DAC over the I2C interface
-+ */
-+ snd_printk(KERN_INFO "Initializing CS4384 DAC\n");
-+
-+ /*
-+ * Register 0x01: device/revid
-+ */
-+ send[0] = 0x01;
-+ ret = i2c_master_send(client, send, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed 1st attempt to write to CS4384 register 0x01\n");
-+ goto fail;
-+ }
-+ ret = i2c_master_recv(client, recv, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed initial read of CS4384 registers\n");
-+ goto fail;
-+ }
-+ snd_printk(KERN_INFO "CS4384 DAC Device/Rev: %08x\n", recv[0]);
-+
-+ /*
-+ * Register 0x02: Mode Control 1
-+ * Control Port Enable, PCM, All DACs enabled, Power Down
-+ */
-+ send[0] = 0x02;
-+ send[1] = 0x81;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set CPEN CS4384\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register 0x08: Ramp and Mute
-+ * RMP_UP, RMP_DN, PAMUTE, DAMUTE
-+ */
-+ send[0] = 0x08;
-+ send[1] = 0xBC;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set CPEN CS4384\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register 0x03: PCM Control
-+ * I2S DIF[3:0] = 0001, no De-Emphasis, Auto speed mode
-+ */
-+ send[0] = 0x03;
-+ send[1] = 0x13;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to set CS4384 to I2S mode\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register 0x0B/0x0C: Volume control A1/B1
-+ * Register 0x0E/0x0F: Volume control A2/B2
-+ * Register 0x11/0x12: Volume control A3/B3
-+ * Register 0x14/0x15: Volume control A4/B4
-+ */
-+ send[0] = 0x80 | 0x0B;
-+ send[1] = 0x00;
-+ send[2] = 0x00;
-+ ret = i2c_master_send(client, send, 3);
-+ if (ret != 3) {
-+ snd_printk(KERN_ERR "Failed to set ch1 volume on CS4384\n");
-+ goto fail;
-+ }
-+
-+ send[0] = 0x80 | 0x0E;
-+ send[1] = 0x00;
-+ send[2] = 0x00;
-+ ret = i2c_master_send(client, send, 3);
-+ if (ret != 3) {
-+ snd_printk(KERN_ERR "Failed to set ch2 volume on CS4384\n");
-+ goto fail;
-+ }
-+
-+ send[0] = 0x80 | 0x11;
-+ send[1] = 0x00;
-+ send[2] = 0x00;
-+ ret = i2c_master_send(client, send, 3);
-+ if (ret != 3) {
-+ snd_printk(KERN_ERR "Failed to set ch3 volume on CS4384\n");
-+ goto fail;
-+ }
-+
-+ send[0] = 0x80 | 0x14;
-+ send[1] = 0x00;
-+ send[2] = 0x00;
-+ ret = i2c_master_send(client, send, 3);
-+ if (ret != 3) {
-+ snd_printk(KERN_ERR "Failed to set ch4 volume on CS4384\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register 09h: Mute control
-+ * Mute all (we will unmute channels as needed)
-+ */
-+ send[0] = 0x09;
-+ send[1] = 0xFF;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to power up CS4384\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Register 0x02: Mode Control 1
-+ * Control Port Enable, PCM, All DACs enabled, Power Up
-+ */
-+ send[0] = 0x02;
-+ send[1] = 0x80;
-+ ret = i2c_master_send(client, send, 2);
-+ if (ret != 2) {
-+ snd_printk(KERN_ERR "Failed to power up CS4384\n");
-+ goto fail;
-+ }
-+
-+ /*
-+ * Make sure the changes took place, this helps verify we are talking to
-+ * the correct chip.
-+ */
-+ send[0] = 0x80 | 0x03;
-+ ret = i2c_master_send(client, send, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed to initiate readback\n");
-+ goto fail;
-+ }
-+
-+ ret = i2c_master_recv(client, recv, 1);
-+ if (ret != 1) {
-+ snd_printk(KERN_ERR "Failed second read of CS4384 registers\n");
-+ goto fail;
-+ }
-+
-+ if (recv[0] != 0x13) {
-+ snd_printk(KERN_ERR "Failed to initialize CS4384 DAC\n");
-+ goto fail;
-+ }
-+
-+ snd_printk(KERN_INFO "CS4384 DAC Initialized\n");
-+ return 0;
-+
-+fail:
-+ return -ENODEV;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_i2c_probe
-+ */
-+static int snd_ubi32_cs4384_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+ int err, ret;
-+ struct platform_device *pdev;
-+ struct ubi32_cs4384_platform_data *pdata;
-+ struct snd_ubi32_cs4384_priv *cs4384_priv;
-+
-+ /*
-+ * pdev is audio device
-+ */
-+ pdev = client->dev.platform_data;
-+ if (!pdev) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * pdev->dev.platform_data is ubi32-pcm platform_data
-+ */
-+ pdata = audio_device_priv(pdev);
-+ if (!pdata) {
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Initialize the CS4384 DAC
-+ */
-+ ret = snd_ubi32_cs4384_dac_init(client, id);
-+ if (ret < 0) {
-+ /*
-+ * Initialization failed. Propagate the error.
-+ */
-+ return ret;
-+ }
-+
-+ if (snd_ubi32_cs4384_setup_mclk(pdata)) {
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Create a snd_card structure
-+ */
-+ card = snd_card_new(index, "Ubi32-CS4384", THIS_MODULE, sizeof(struct ubi32_snd_priv));
-+ if (card == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ card->private_free = snd_ubi32_cs4384_free;
-+ ubi32_priv = card->private_data;
-+
-+ /*
-+ * Initialize the snd_card's private data structure
-+ */
-+ ubi32_priv->card = card;
-+ ubi32_priv->client = client;
-+ ubi32_priv->set_channels = snd_ubi32_cs4384_set_channels;
-+ ubi32_priv->set_rate = snd_ubi32_cs4384_set_rate;
-+
-+ /*
-+ * CS4384 DAC has a minimum sample rate of 4khz and an
-+ * upper limit of 216khz for it's auto-detect.
-+ */
-+ ubi32_priv->min_sample_rate = 4000;
-+ ubi32_priv->max_sample_rate = 216000;
-+
-+ /*
-+ * Create our private data (to manage volume, etc)
-+ */
-+ cs4384_priv = kzalloc(sizeof(struct snd_ubi32_cs4384_priv), GFP_KERNEL);
-+ if (!cs4384_priv) {
-+ snd_card_free(card);
-+ return -ENOMEM;
-+ }
-+ snd_ubi32_priv_set_drv(ubi32_priv, cs4384_priv);
-+ spin_lock_init(&cs4384_priv->lock);
-+
-+ /*
-+ * We start off all muted and max volume
-+ */
-+ cs4384_priv->mute = 0xFF;
-+ memset(cs4384_priv->volume, 0xFF, 8);
-+
-+ /*
-+ * Create the new PCM instance
-+ */
-+ err = snd_ubi32_pcm_probe(ubi32_priv, pdev);
-+ if (err < 0) {
-+ snd_card_free(card);
-+ return err; /* What is err? Need to include correct file */
-+ }
-+
-+ strcpy(card->driver, "Ubi32-CS4384");
-+ strcpy(card->shortname, "Ubi32-CS4384");
-+ snprintf(card->longname, sizeof(card->longname),
-+ "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
-+ card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
-+ ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-+
-+ snd_card_set_dev(card, &client->dev);
-+
-+ /*
-+ * Set up the mixer
-+ */
-+ snd_ubi32_cs4384_mixer(ubi32_priv);
-+
-+ /*
-+ * Register the sound card
-+ */
-+ if ((err = snd_card_register(card)) != 0) {
-+ snd_printk(KERN_INFO "snd_card_register error\n");
-+ }
-+
-+ /*
-+ * Store card for access from other methods
-+ */
-+ i2c_set_clientdata(client, card);
-+
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_cs4384_i2c_remove
-+ */
-+static int __devexit snd_ubi32_cs4384_i2c_remove(struct i2c_client *client)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+
-+ card = i2c_get_clientdata(client);
-+
-+ ubi32_priv = card->private_data;
-+ snd_ubi32_pcm_remove(ubi32_priv);
-+
-+ snd_card_free(i2c_get_clientdata(client));
-+ i2c_set_clientdata(client, NULL);
-+
-+ return 0;
-+}
-+
-+/*
-+ * I2C driver description
-+ */
-+static struct i2c_driver snd_ubi32_cs4384_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .id_table = snd_ubi32_cs4384_id,
-+ .probe = snd_ubi32_cs4384_i2c_probe,
-+ .remove = __devexit_p(snd_ubi32_cs4384_i2c_remove),
-+};
-+
-+/*
-+ * Driver init
-+ */
-+static int __init snd_ubi32_cs4384_init(void)
-+{
-+ return i2c_add_driver(&snd_ubi32_cs4384_driver);
-+}
-+module_init(snd_ubi32_cs4384_init);
-+
-+/*
-+ * snd_ubi32_cs4384_exit
-+ */
-+static void __exit snd_ubi32_cs4384_exit(void)
-+{
-+ i2c_del_driver(&snd_ubi32_cs4384_driver);
-+}
-+module_exit(snd_ubi32_cs4384_exit);
-+
-+/*
-+ * Module properties
-+ */
-+MODULE_ALIAS("i2c:" DRIVER_NAME);
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices CS4384");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/sound/ubicom32/ubi32-generic.c linux-2.6.30.10-ubi/sound/ubicom32/ubi32-generic.c
---- linux-2.6.30.10/sound/ubicom32/ubi32-generic.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/ubi32-generic.c 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,166 @@
-+/*
-+ * sound/ubicom32/ubi32-generic.c
-+ * Interface to ubicom32 virtual audio peripheral
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/initval.h>
-+#include "ubi32.h"
-+
-+#define DRIVER_NAME "snd-ubi32-generic"
-+
-+/*
-+ * Module properties
-+ */
-+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-+
-+/*
-+ * Card private data free function
-+ */
-+void snd_ubi32_generic_free(struct snd_card *card)
-+{
-+ /*
-+ * Free all the fields in the snd_ubi32_priv struct
-+ */
-+ // Nothing to free at this time because ubi32_priv just maintains pointers
-+}
-+
-+/*
-+ * Ubicom audio driver probe() method. Args change depending on whether we use
-+ * platform_device or i2c_device.
-+ */
-+static int snd_ubi32_generic_probe(struct platform_device *dev)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+ int err;
-+
-+ /*
-+ * Create a snd_card structure
-+ */
-+ card = snd_card_new(index, "Ubi32-Generic", THIS_MODULE, sizeof(struct ubi32_snd_priv));
-+
-+ if (card == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ card->private_free = snd_ubi32_generic_free; /* Not sure if correct */
-+ ubi32_priv = card->private_data;
-+
-+ /*
-+ * Initialize the snd_card's private data structure
-+ */
-+ ubi32_priv->card = card;
-+
-+ /*
-+ * Create the new PCM instance
-+ */
-+ err = snd_ubi32_pcm_probe(ubi32_priv, dev);
-+ if (err < 0) {
-+ snd_card_free(card);
-+ return err;
-+ }
-+
-+ strcpy(card->driver, "Ubi32-Generic");
-+ strcpy(card->shortname, "Ubi32-Generic");
-+ snprintf(card->longname, sizeof(card->longname),
-+ "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
-+ card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
-+ ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-+
-+ snd_card_set_dev(card, &dev->dev);
-+
-+ /* Register the sound card */
-+ if ((err = snd_card_register(card)) != 0) {
-+ snd_printk(KERN_INFO "snd_card_register error\n");
-+ }
-+
-+ /* Store card for access from other methods */
-+ platform_set_drvdata(dev, card);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Ubicom audio driver remove() method
-+ */
-+static int __devexit snd_ubi32_generic_remove(struct platform_device *dev)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+
-+ card = platform_get_drvdata(dev);
-+ ubi32_priv = card->private_data;
-+ snd_ubi32_pcm_remove(ubi32_priv);
-+
-+ snd_card_free(platform_get_drvdata(dev));
-+ platform_set_drvdata(dev, NULL);
-+ return 0;
-+}
-+
-+/*
-+ * Platform driver definition
-+ */
-+static struct platform_driver snd_ubi32_generic_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = snd_ubi32_generic_probe,
-+ .remove = __devexit_p(snd_ubi32_generic_remove),
-+};
-+
-+/*
-+ * snd_ubi32_generic_init
-+ */
-+static int __init snd_ubi32_generic_init(void)
-+{
-+ return platform_driver_register(&snd_ubi32_generic_driver);
-+}
-+module_init(snd_ubi32_generic_init);
-+
-+/*
-+ * snd_ubi32_generic_exit
-+ */
-+static void __exit snd_ubi32_generic_exit(void)
-+{
-+ platform_driver_unregister(&snd_ubi32_generic_driver);
-+}
-+module_exit(snd_ubi32_generic_exit);
-+
-+/*
-+ * Module properties
-+ */
-+//#if defined(CONFIG_SND_UBI32_AUDIO_I2C)
-+//MODULE_ALIAS("i2c:snd-ubi32");
-+//#endif
-+MODULE_AUTHOR("Aaron Jow, Patrick Tjin");
-+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/sound/ubicom32/ubi32-generic-capture.c linux-2.6.30.10-ubi/sound/ubicom32/ubi32-generic-capture.c
---- linux-2.6.30.10/sound/ubicom32/ubi32-generic-capture.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/ubi32-generic-capture.c 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,167 @@
-+/*
-+ * sound/ubicom32/ubi32-generic-capture.c
-+ * Interface to ubicom32 virtual audio peripheral
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/initval.h>
-+#include "ubi32.h"
-+
-+#define DRIVER_NAME "snd-ubi32-generic-capture"
-+
-+/*
-+ * Module properties
-+ */
-+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
-+
-+/*
-+ * Card private data free function
-+ */
-+void snd_ubi32_generic_capture_free(struct snd_card *card)
-+{
-+ /*
-+ * Free all the fields in the snd_ubi32_priv struct
-+ */
-+ // Nothing to free at this time because ubi32_priv just maintains pointers
-+}
-+
-+/*
-+ * Ubicom audio driver probe() method. Args change depending on whether we use
-+ * platform_device or i2c_device.
-+ */
-+static int snd_ubi32_generic_capture_probe(struct platform_device *dev)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+ int err;
-+
-+ /*
-+ * Create a snd_card structure
-+ */
-+ card = snd_card_new(index, "Ubi32-Generic-C", THIS_MODULE, sizeof(struct ubi32_snd_priv));
-+
-+ if (card == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ card->private_free = snd_ubi32_generic_capture_free; /* Not sure if correct */
-+ ubi32_priv = card->private_data;
-+
-+ /*
-+ * Initialize the snd_card's private data structure
-+ */
-+ ubi32_priv->card = card;
-+ ubi32_priv->is_capture = 1;
-+
-+ /*
-+ * Create the new PCM instance
-+ */
-+ err = snd_ubi32_pcm_probe(ubi32_priv, dev);
-+ if (err < 0) {
-+ snd_card_free(card);
-+ return err;
-+ }
-+
-+ strcpy(card->driver, "Ubi32-Generic-C");
-+ strcpy(card->shortname, "Ubi32-Generic-C");
-+ snprintf(card->longname, sizeof(card->longname),
-+ "%s at sendirq=%d.%d recvirq=%d.%d regs=%p",
-+ card->shortname, ubi32_priv->tx_irq, ubi32_priv->irq_idx,
-+ ubi32_priv->rx_irq, ubi32_priv->irq_idx, ubi32_priv->adr);
-+
-+ snd_card_set_dev(card, &dev->dev);
-+
-+ /* Register the sound card */
-+ if ((err = snd_card_register(card)) != 0) {
-+ snd_printk(KERN_INFO "snd_card_register error\n");
-+ }
-+
-+ /* Store card for access from other methods */
-+ platform_set_drvdata(dev, card);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Ubicom audio driver remove() method
-+ */
-+static int __devexit snd_ubi32_generic_capture_remove(struct platform_device *dev)
-+{
-+ struct snd_card *card;
-+ struct ubi32_snd_priv *ubi32_priv;
-+
-+ card = platform_get_drvdata(dev);
-+ ubi32_priv = card->private_data;
-+ snd_ubi32_pcm_remove(ubi32_priv);
-+
-+ snd_card_free(platform_get_drvdata(dev));
-+ platform_set_drvdata(dev, NULL);
-+ return 0;
-+}
-+
-+/*
-+ * Platform driver definition
-+ */
-+static struct platform_driver snd_ubi32_generic_capture_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = snd_ubi32_generic_capture_probe,
-+ .remove = __devexit_p(snd_ubi32_generic_capture_remove),
-+};
-+
-+/*
-+ * snd_ubi32_generic_capture_init
-+ */
-+static int __init snd_ubi32_generic_capture_init(void)
-+{
-+ return platform_driver_register(&snd_ubi32_generic_capture_driver);
-+}
-+module_init(snd_ubi32_generic_capture_init);
-+
-+/*
-+ * snd_ubi32_generic_capture_exit
-+ */
-+static void __exit snd_ubi32_generic_capture_exit(void)
-+{
-+ platform_driver_unregister(&snd_ubi32_generic_capture_driver);
-+}
-+module_exit(snd_ubi32_generic_capture_exit);
-+
-+/*
-+ * Module properties
-+ */
-+//#if defined(CONFIG_SND_UBI32_AUDIO_I2C)
-+//MODULE_ALIAS("i2c:snd-ubi32");
-+//#endif
-+MODULE_AUTHOR("Patrick Tjin");
-+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices");
-+MODULE_LICENSE("GPL");
-diff -ruN linux-2.6.30.10/sound/ubicom32/ubi32.h linux-2.6.30.10-ubi/sound/ubicom32/ubi32.h
---- linux-2.6.30.10/sound/ubicom32/ubi32.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/ubi32.h 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,102 @@
-+/*
-+ * sound/ubicom32/ubi32.h
-+ * Common header file for all ubi32- sound drivers
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef _UBI32_H
-+#define _UBI32_H
-+
-+#define SND_UBI32_DEBUG 0 // Debug flag
-+
-+#include <linux/platform_device.h>
-+#include <asm/devtree.h>
-+#include <asm/audio.h>
-+#include <asm/ubi32-pcm.h>
-+
-+struct ubi32_snd_priv;
-+
-+typedef int (*set_channels_t)(struct ubi32_snd_priv *priv, int channels);
-+typedef int (*set_rate_t)(struct ubi32_snd_priv *priv, int rate);
-+
-+struct ubi32_snd_priv {
-+ /*
-+ * Any variables that are needed locally here but NOT in
-+ * the VP itself should go in here.
-+ */
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+
-+ /*
-+ * capture (1) or playback (0)
-+ */
-+ int is_capture;
-+ /*
-+ * DAC parameters. These are the parameters for the specific
-+ * DAC we are driving. The I2S component can run at a range
-+ * of frequencies, but the DAC may be limited. We may want
-+ * to make this an array of some sort in the future?
-+ *
-+ * min/max_sample_rate if set to 0 are ignored.
-+ */
-+ int max_sample_rate;
-+ int min_sample_rate;
-+
-+ /*
-+ * The size a period (group) of audio samples. The VP does
-+ * not need to know this; each DMA transfer is made to be
-+ * one period.
-+ */
-+ u32_t period_size;
-+
-+ spinlock_t ubi32_lock;
-+
-+ struct audio_regs *ar;
-+ struct audio_dev_regs *adr;
-+ u32 irq_idx;
-+ u8 tx_irq;
-+ u8 rx_irq;
-+
-+ void *client;
-+
-+ /*
-+ * Operations which the base DAC driver can implement
-+ */
-+ set_channels_t set_channels;
-+ set_rate_t set_rate;
-+
-+ /*
-+ * platform data
-+ */
-+ struct ubi32pcm_platform_data *pdata;
-+
++ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
++ /* hw_ep = musb->bulk_ep; */
++ if (is_in) {
++ head = &musb->in_bulk;
++ hw_ep = musb->bulk_ep_in; /* UBICOM */
++ }
++ else {
++ head = &musb->out_bulk;
++ hw_ep = musb->bulk_ep_out; /* UBICOM */
++ }
++ goto success;
++ } else if (best_end < 0) {
++ return -ENOSPC;
++ }
++#endif
+
+ idle = 1;
+ qh->mux = 0;
+@@ -1869,6 +1962,13 @@ success:
+ list_add_tail(&qh->ring, head);
+ qh->mux = 1;
+ }
+ /*
-+ * Private driver data (used for DAC driver control, etc)
++ * It's not make sense to set NAK timeout when qh->mux = 0,
++ * There is nothing else to schedule
+ */
-+ void *drvdata;
-+};
-+
-+#define snd_ubi32_priv_get_drv(priv) ((priv)->drvdata)
-+#define snd_ubi32_priv_set_drv(priv, data) (((priv)->drvdata) = (void *)(data))
-+
-+extern int snd_ubi32_pcm_probe(struct ubi32_snd_priv *ubi32_priv, struct platform_device *pdev);
-+extern void snd_ubi32_pcm_remove(struct ubi32_snd_priv *ubi32_priv);
++ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
++ qh->intv_reg = 0;
+
+ qh->hw_ep = hw_ep;
+ qh->hep->hcpriv = qh;
+ if (idle)
+@@ -1975,6 +2075,15 @@ static int musb_urb_enqueue(
+ /* ISO always uses logarithmic encoding */
+ interval = min_t(u8, epd->bInterval, 16);
+ break;
++#ifdef COMFIG_UBICOM32
++ case USB_ENDPOINT_XFER_BULK:
++ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
++ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
++ else
++ interval = 0;
++ break;
+#endif
-diff -ruN linux-2.6.30.10/sound/ubicom32/ubi32-pcm.c linux-2.6.30.10-ubi/sound/ubicom32/ubi32-pcm.c
---- linux-2.6.30.10/sound/ubicom32/ubi32-pcm.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6.30.10-ubi/sound/ubicom32/ubi32-pcm.c 2009-12-11 11:45:25.000000000 +0200
-@@ -0,0 +1,711 @@
-+/*
-+ * sound/ubicom32/ubi32-pcm.c
-+ * Interface to ubicom32 virtual audio peripheral
-+ *
-+ * (C) Copyright 2009, Ubicom, Inc.
-+ *
-+ * This file is part of the Ubicom32 Linux Kernel Port.
-+ *
-+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
-+ * it and/or modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation, either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
-+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
-+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-+ * the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with the Ubicom32 Linux Kernel Port. If not,
-+ * see <http://www.gnu.org/licenses/>.
-+ *
-+ * Ubicom32 implementation derived from (with many thanks):
-+ * arch/m68knommu
-+ * arch/blackfin
-+ * arch/parisc
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <asm/ip5000.h>
-+#include <asm/ubi32-pcm.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/delay.h>
-+#include "ubi32.h"
+
-+struct ubi32_snd_runtime_data {
-+ dma_addr_t dma_buffer; /* Physical address of DMA buffer */
-+ dma_addr_t dma_buffer_end; /* First address beyond end of DMA buffer */
-+ size_t period_size;
-+ dma_addr_t period_ptr; /* Physical address of next period */
-+ unsigned int flags;
-+};
-+
-+static void snd_ubi32_vp_int_set(struct snd_pcm *pcm)
+ default:
+ /* REVISIT we actually want to use NAK limits, hinting to the
+ * transfer scheduling logic to try some other qh, e.g. try
+--- a/drivers/usb/musb/musb_io.h
++++ b/drivers/usb/musb/musb_io.h
+@@ -58,6 +58,7 @@ static inline void writesb(const void __
+
+ #ifndef CONFIG_BLACKFIN
+
++#ifndef CONFIG_UBICOM32
+ /* NOTE: these offsets are all in bytes */
+
+ static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+@@ -72,7 +73,37 @@ static inline void musb_writew(void __io
+
+ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+ { __raw_writel(data, addr + offset); }
++#else
++#include <asm/ubicom32-tio.h>
++static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+{
-+ struct ubi32_snd_priv *ubi32_priv = pcm->private_data;
-+ ubi32_priv->ar->int_req |= (1 << ubi32_priv->irq_idx);
-+ ubicom32_set_interrupt(ubi32_priv->tx_irq);
++ u16 data;
++ usb_tio_read_u16((u32)(addr + offset), &data);
++ return data;
+}
-+
-+static snd_pcm_uframes_t snd_ubi32_pcm_pointer(struct snd_pcm_substream *substream)
+
++static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
-+
-+ struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
-+ struct audio_dev_regs *adr = ubi32_priv->adr;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
-+
-+ dma_addr_t read_pos;
-+
-+ snd_pcm_uframes_t frames;
-+ if (!adr->primary_os_buffer_ptr) {
-+ /*
-+ * If primary_os_buffer_ptr is NULL (e.g. right after the HW is started or
-+ * when the HW is stopped), then handle this case separately.
-+ */
-+ return 0;
-+ }
-+
-+ read_pos = (dma_addr_t)adr->primary_os_buffer_ptr;
-+ frames = bytes_to_frames(runtime, read_pos - ubi32_rd->dma_buffer);
-+ if (frames == runtime->buffer_size) {
-+ frames = 0;
-+ }
-+ return frames;
++ u8 data;
++ usb_tio_read_u8((u32)(addr + offset), &data);
++ return data;
+}
+
-+/*
-+ * Audio trigger
-+ */
-+static int snd_ubi32_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
++static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+{
-+ struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
-+ struct audio_dev_regs *adr = ubi32_priv->adr;
-+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
-+ int ret = 0;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_trigger cmd=%d=", cmd);
-+#endif
-+
-+ if (adr->command != AUDIO_CMD_NONE) {
-+ snd_printk(KERN_WARNING "Can't send command to audio device at this time\n");
-+ // Set a timer to call this function back later. How to do this?
-+ return 0;
-+ }
-+
-+ /*
-+ * Set interrupt flag to indicate that we interrupted audio device
-+ * to send a command
-+ */
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "START\n");
-+#endif
-+ /*
-+ * Ready the DMA transfer
-+ */
-+ ubi32_rd->period_ptr = ubi32_rd->dma_buffer;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "trigger period_ptr=%lx\n", (unsigned long)ubi32_rd->period_ptr);
-+#endif
-+ adr->dma_xfer_requests[0].ptr = (void *)ubi32_rd->period_ptr;
-+ adr->dma_xfer_requests[0].ctr = ubi32_rd->period_size;
-+ adr->dma_xfer_requests[0].active = 1;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "xfer_request 0 ptr=0x%x ctr=%u\n", ubi32_rd->period_ptr, ubi32_rd->period_size);
-+#endif
-+
-+ ubi32_rd->period_ptr += ubi32_rd->period_size;
-+ adr->dma_xfer_requests[1].ptr = (void *)ubi32_rd->period_ptr;
-+ adr->dma_xfer_requests[1].ctr = ubi32_rd->period_size;
-+ adr->dma_xfer_requests[1].active = 1;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "xfer_request 1 ptr=0x%x ctr=%u\n", ubi32_rd->period_ptr, ubi32_rd->period_size);
-+#endif
-+
-+ /*
-+ * Tell the VP that we want to begin playback by filling in the
-+ * command field and then interrupting the audio VP
-+ */
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ adr->command = AUDIO_CMD_START;
-+ snd_ubi32_vp_int_set(substream->pcm);
-+ break;
-+
-+ case SNDRV_PCM_TRIGGER_STOP:
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "STOP\n");
-+#endif
-+
-+ /*
-+ * Tell the VP that we want to stop playback by filling in the
-+ * command field and then interrupting the audio VP
-+ */
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ adr->command = AUDIO_CMD_STOP;
-+ snd_ubi32_vp_int_set(substream->pcm);
-+ break;
-+
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "PAUSE_PUSH\n");
-+#endif
-+
-+ /*
-+ * Tell the VP that we want to pause playback by filling in the
-+ * command field and then interrupting the audio VP
-+ */
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ adr->command = AUDIO_CMD_PAUSE;
-+ snd_ubi32_vp_int_set(substream->pcm);
-+ break;
-+
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "PAUSE_RELEASE\n");
-+#endif
-+ /*
-+ * Tell the VP that we want to resume paused playback by filling
-+ * in the command field and then interrupting the audio VP
-+ */
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ adr->command = AUDIO_CMD_RESUME;
-+ snd_ubi32_vp_int_set(substream->pcm);
-+ break;
-+
-+ default:
-+ snd_printk(KERN_WARNING "Unhandled trigger\n");
-+ ret = -EINVAL;
-+ break;
-+ }
++ usb_tio_write_u16((u32)(addr + offset), data);
++}
+
-+ return ret;
++static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
++{
++ usb_tio_write_u8((u32)(addr + offset), data);
+}
+
-+/*
-+ * Prepare to transfer an audio stream to the codec
-+ */
-+static int snd_ubi32_pcm_prepare(struct snd_pcm_substream *substream)
++static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
+{
-+ /*
-+ * Configure registers and setup the runtime instance for DMA transfers
-+ */
-+ struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
-+ struct audio_dev_regs *adr = ubi32_priv->adr;
++ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
++}
++#endif /* CONFIG_UBICOM32 */
+
+ #ifdef CONFIG_USB_TUSB6010
+
+@@ -106,7 +137,7 @@ static inline void musb_writeb(void __io
+ __raw_writew(tmp, addr + (offset & ~1));
+ }
+
+-#else
++#elif !defined(CONFIG_UBICOM32)
+
+ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+ { return __raw_readb(addr + offset); }
+--- a/drivers/usb/musb/musb_regs.h
++++ b/drivers/usb/musb/musb_regs.h
+@@ -167,6 +167,7 @@
+ (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+ | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_prepare: sending STOP command to audio device\n");
-+#endif
+ /* RXCSR in Peripheral and Host mode */
+ #define MUSB_RXCSR_AUTOCLEAR 0x8000
+ #define MUSB_RXCSR_DMAENAB 0x2000
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -93,6 +93,63 @@ config LCD_HP700
+ If you have an HP Jornada 700 series handheld (710/720/728)
+ say Y to enable LCD control driver.
+
++config LCD_UBICOM32POWER
++ tristate "Ubicom LCD power Driver"
++ depends on LCD_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ If you have a Ubicom32 based system with an LCD panel that requires
++ power control, say Y to enable the power control driver for it.
+
-+ /*
-+ * Make sure the audio device is stopped
-+ */
++config LCD_UBICOM32
++ tristate "Ubicom Backlight Driver"
++ depends on LCD_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ This driver takes care of initialization of LCD panels with
++ built in controllers.
+
-+ /*
-+ * Set interrupt flag to indicate that we interrupted audio device
-+ * to send a command
-+ */
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ adr->command = AUDIO_CMD_STOP;
-+ snd_ubi32_vp_int_set(substream->pcm);
++menu "Ubicom32 LCD Panel Support"
++ depends on UBICOM32 && LCD_UBICOM32
+
-+ return 0;
-+}
++config LCD_UBICOM32_TFT2N0369E_P
++ bool "TFT2N0369E (Portrait)"
++ default n
++ help
++ Support for TFT2N0369 in portrait mode
+
-+/*
-+ * Allocate DMA buffers from preallocated memory.
-+ * Preallocation was done in snd_ubi32_pcm_new()
-+ */
-+static int snd_ubi32_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
-+ struct audio_dev_regs *adr = ubi32_priv->adr;
-+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
++config LCD_UBICOM32_TFT2N0369E_L
++ bool "TFT2N0369E (Landscape)"
++ default n
++ help
++ Support for TFT2N0369 in landscape mode
+
-+ /*
-+ * Use pre-allocated memory from ubi32_snd_pcm_new() to satisfy
-+ * this memory request.
-+ */
-+ int ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
-+ if (ret < 0) {
-+ return ret;
-+ }
++config LCD_UBICOM32_CFAF240320KTTS
++ bool "CFAF240320KTTS"
++ default n
++ help
++ Support for CFAF240320KTTS
+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_hw_params\n");
-+#endif
++config LCD_UBICOM32_CFAF240320KTTS_180
++ bool "CFAF240320KTTS (180 rotation)"
++ default n
++ help
++ Support for CFAF240320KTTS rotated 180 degrees
+
-+ if (!(adr->channel_mask & (1 << params_channels(hw_params)))) {
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_hw_params unsupported number of channels %d mask %08x\n", params_channels(hw_params), adr->channel_mask);
-+ return -EINVAL;
-+ }
++config LCD_UBICOM32_CFAF240320D
++ bool "CFAF240320D"
++ default n
++ help
++ Support for CFAF240320D
+
-+ if (ubi32_priv->set_channels) {
-+ int ret = ubi32_priv->set_channels(ubi32_priv, params_channels(hw_params));
-+ if (ret) {
-+ snd_printk(KERN_WARNING "Unable to set channels to %d, ret=%d\n", params_channels(hw_params), ret);
-+ return ret;
-+ }
-+ }
++config LCD_UBICOM32_CFAF320240F
++ bool "CFAF320240F"
++ default n
++ help
++ Support for CFAF320240F
+
-+ if (ubi32_priv->set_rate) {
-+ int ret = ubi32_priv->set_rate(ubi32_priv, params_rate(hw_params));
-+ if (ret) {
-+ snd_printk(KERN_WARNING "Unable to set rate to %d, ret=%d\n", params_rate(hw_params), ret);
-+ return ret;
-+ }
-+ }
++endmenu
+
-+ if (ubi32_priv->pdata->set_rate) {
-+ int ret = ubi32_priv->pdata->set_rate(ubi32_priv->pdata->appdata, params_rate(hw_params));
-+ if (ret) {
-+ snd_printk(KERN_WARNING "Unable to set rate to %d, ret=%d\n", params_rate(hw_params), ret);
-+ return ret;
-+ }
-+ }
+ #
+ # Backlight
+ #
+@@ -229,3 +286,11 @@ config BACKLIGHT_SAHARA
+ help
+ If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
+ backlight driver.
++
++config BACKLIGHT_UBICOM32
++ tristate "Ubicom Backlight Driver"
++ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ If you have a Ubicom32 based system with a backlight say Y to enable the
++ backlight driver.
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -9,6 +9,9 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor
+ obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
+ obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
+ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o
++obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
+
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
+@@ -24,4 +27,4 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x
+ obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
+ obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
+ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+-
++obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -609,6 +609,50 @@ config FB_BFIN_T350MCQB
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
++config FB_UBICOM32
++ tristate "Ubicom32 Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ help
++ This is the framebuffer device driver for the Ubicom32 architecture.
++ You can configure video memory by using kernel command line parameters, for example:
++ video=ubicomfb:vram_size=512,init_value=0xffff
+
-+ if (adr->command != AUDIO_CMD_NONE) {
-+ snd_printk(KERN_WARNING "snd_ubi32_pcm_hw_params: tio busy\n");
-+ return -EAGAIN;
-+ }
++config FB_UBICOM32_PLIO80
++ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ select UBICOM32_PLIO
++ help
++ This is a framebuffer device driver for the Ubicom32 architecture.
++ You can configure the xres, yres and vram size (in kilobytes) by using
++ kernel command line parameters, for example:
++ video=ubicom32vfb:xres=320,yres=240,vram_size=512
+
-+ if (params_format(hw_params) == SNDRV_PCM_FORMAT_S16_LE) {
-+ adr->flags |= CMD_START_FLAG_LE;
-+ } else {
-+ adr->flags &= ~CMD_START_FLAG_LE;
-+ }
-+ adr->channels = params_channels(hw_params);
-+ adr->sample_rate = params_rate(hw_params);
-+ adr->command = AUDIO_CMD_SETUP;
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ snd_ubi32_vp_int_set(substream->pcm);
++config FB_UBICOM32_VIRTUAL
++ tristate "Ubicom32 Virtual Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ help
++ This is a virtual framebuffer device driver for the Ubicom32 architecture.
++ You can configure the xres, yres and vram size (in kilobytes) by using
++ kernel command line parameters, for example:
++ video=ubicom32vfb:xres=320,yres=240,vram_size=512
+
-+ /*
-+ * Wait for the command to complete
-+ */
-+ while (adr->command != AUDIO_CMD_NONE) {
-+ udelay(1);
-+ }
++config FB_UBICOM32_VIRTUAL_NOAUTO
++ bool "Do not automatically load"
++ depends on FB_UBICOM32_VIRTUAL
++ help
++ Select this option to prevent the VFB from automatically loading at boot.
+
+ config FB_STI
+ tristate "HP STI frame buffer device support"
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -136,6 +136,10 @@ obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-
+ obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
+ obj-$(CONFIG_FB_MX3) += mx3fb.o
+
++obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
++obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o
++obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o
+
-+ /*
-+ * Put the DMA info into the DMA descriptor that we will
-+ * use to do transfers to our audio VP "hardware"
-+ */
+ # the test framebuffer is last
+ obj-$(CONFIG_FB_VIRTUAL) += vfb.o
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -887,6 +887,19 @@ config WATCHDOG_RIO
+ machines. The watchdog timeout period is normally one minute but
+ can be changed with a boot-time parameter.
+
++# Ubicom32
+
-+ /*
-+ * Mark both DMA transfers as not ready/inactive
-+ */
-+ adr->dma_xfer_requests[0].active = 0;
-+ adr->dma_xfer_requests[1].active = 0;
++config UBI32_WDT
++ tristate "Ubicom32 Hardware Watchdog support"
++ depends on UBICOM32
++ ---help---
++ If you say yes here you will get support for the Ubicom32 On-Chip
++ Watchdog Timer. If you have one of these processors and wish to
++ have watchdog support enabled, say Y, otherwise say N.
+
-+ /*
-+ * Put the location of the buffer into the runtime data instance
-+ */
-+ ubi32_rd->dma_buffer = (dma_addr_t)runtime->dma_area;
-+ ubi32_rd->dma_buffer_end = (dma_addr_t)(runtime->dma_area + runtime->dma_bytes);
++ To compile this driver as a module, choose M here: the
++ module will be called ubi32_wdt.
+
-+ /*
-+ * Get the period size
-+ */
-+ ubi32_rd->period_size = params_period_bytes(hw_params);
+ # XTENSA Architecture
+
+ #
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -131,6 +131,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
+ obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
+ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
+
++# Ubicom32 Architecture
++obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "DMA for ubi32 audio initialized dma_area=0x%x dma_bytes=%d, period_size=%d\n", (unsigned int)runtime->dma_area, (unsigned int)runtime->dma_bytes, ubi32_rd->period_size);
-+ snd_printk(KERN_INFO "Private buffer ubi32_rd: dma_buffer=0x%x dma_buffer_end=0x%x ret=%d\n", ubi32_rd->dma_buffer, ubi32_rd->dma_buffer_end, ret);
+ # XTENSA Architecture
+
+ # Architecture Independant
+--- a/fs/binfmt_flat.c
++++ b/fs/binfmt_flat.c
+@@ -67,6 +67,11 @@
+ #define FLAT_DATA_ALIGN (sizeof(void *))
+ #endif
+
++#ifndef ARCH_FLAT_ALIGN
++#undef FLAT_DATA_ALIGN
++#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN
+#endif
+
-+ return ret;
-+}
+ #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
+ #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
+
+@@ -436,6 +441,7 @@ static int load_flat_file(struct linux_b
+ loff_t fpos;
+ unsigned long start_code, end_code;
+ int ret;
++ int flush_happened = 0;
+
+ hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
+ inode = bprm->file->f_path.dentry->d_inode;
+@@ -521,6 +527,7 @@ static int load_flat_file(struct linux_b
+
+ /* OK, This is the point of no return */
+ set_personality(PER_LINUX_32BIT);
++ flush_happened = 1;
+ }
+
+ /*
+@@ -535,6 +542,12 @@ static int load_flat_file(struct linux_b
+ * it all together.
+ */
+ if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
+
-+/*
-+ * This is the reverse of snd_ubi32_pcm_hw_params
-+ */
-+static int snd_ubi32_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_hw_free\n");
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ printk("Unable to mmap rom with ARCH alignment requirements\n");
++ ret = -ENOEXEC;
++ goto err;
+#endif
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+/*
-+ * Audio virtual peripheral capabilities (capture and playback are identical)
-+ */
-+static struct snd_pcm_hardware snd_ubi32_pcm_hw =
-+{
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-+ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
-+ .buffer_bytes_max = (64*1024),
-+ .period_bytes_min = 64,
-+ .period_bytes_max = 8184,//8184,//8176,
-+ .periods_min = 2,
-+ .periods_max = 255,
-+ .fifo_size = 0, // THIS IS IGNORED BY ALSA
-+};
-+
-+/*
-+ * We fill this in later
-+ */
-+static struct snd_pcm_hw_constraint_list ubi32_pcm_rates;
-+
-+/*
-+ * snd_ubi32_pcm_close
-+ */
-+static int snd_ubi32_pcm_close(struct snd_pcm_substream *substream)
-+{
-+ /* Disable codec, stop DMA, free private data structures */
-+ //struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
-+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_close\n");
+ /*
+ * this should give us a ROM ptr, but if it doesn't we don't
+ * really care
+@@ -553,7 +566,7 @@ static int load_flat_file(struct linux_b
+ goto err;
+ }
+
+- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
++ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
+ len = PAGE_ALIGN(len);
+ down_write(¤t->mm->mmap_sem);
+ realdatastart = do_mmap(0, 0, len,
+@@ -572,6 +585,7 @@ static int load_flat_file(struct linux_b
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
++ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
+
+ DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
+ (int)(data_len + bss_len + stack_len), (int)datapos);
+@@ -600,7 +614,11 @@ static int load_flat_file(struct linux_b
+ memp_size = len;
+ } else {
+
+- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
++ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ /* Reserve space for the text alignment. */
++ len += FLAT_DATA_ALIGN;
+#endif
-+
-+ substream->runtime->private_data = NULL;
-+
-+ kfree(ubi32_rd);
-+
-+ return 0;
-+}
-+
-+/*
-+ * snd_ubi32_pcm_open
-+ */
-+static int snd_ubi32_pcm_open(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct ubi32_snd_runtime_data *ubi32_rd;
-+ int ret = 0;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "ubi32 pcm open\n");
+ len = PAGE_ALIGN(len);
+ down_write(¤t->mm->mmap_sem);
+ textpos = do_mmap(0, 0, len,
+@@ -616,10 +634,17 @@ static int load_flat_file(struct linux_b
+ goto err;
+ }
+
++ memp = textpos;
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr);
+#endif
-+
-+ /* Associate capabilities with component */
-+ runtime->hw = snd_ubi32_pcm_hw;
-+
-+ /*
-+ * Inform ALSA about constraints of the audio device
-+ */
-+ ret = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &ubi32_pcm_rates);
-+ if (ret < 0) {
-+ snd_printk(KERN_INFO "invalid rate\n");
-+ goto out;
-+ }
-+
-+ /* Force the buffer size to be an integer multiple of period size */
-+ ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
-+ if (ret < 0) {
-+ snd_printk(KERN_INFO "invalid period\n");
-+ goto out;
-+ }
-+ /* Initialize structures/registers */
-+ ubi32_rd = kzalloc(sizeof(struct ubi32_snd_runtime_data), GFP_KERNEL);
-+ if (ubi32_rd == NULL) {
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ runtime->private_data = ubi32_rd;
-+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_open returned 0\n");
+ realdatastart = textpos + ntohl(hdr->data_start);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
++// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
++// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
++// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
+@@ -659,7 +684,7 @@ static int load_flat_file(struct linux_b
+ }
+ if (result >= (unsigned long)-4096) {
+ printk("Unable to read code+data+bss, errno %d\n",(int)-result);
+- do_munmap(current->mm, textpos, text_len + data_len + extra +
++ do_munmap(current->mm, memp, text_len + data_len + extra +
+ MAX_SHARED_LIBS * sizeof(unsigned long));
+ ret = result;
+ goto err;
+@@ -672,6 +697,9 @@ static int load_flat_file(struct linux_b
+
+ /* The main program needs a little extra setup in the task structure */
+ start_code = textpos + sizeof (struct flat_hdr);
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code);
+#endif
-+
-+ return 0;
-+out:
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "snd_ubi32_pcm_open returned %d\n", ret);
+ end_code = textpos + text_len;
+ if (id == 0) {
+ current->mm->start_code = start_code;
+@@ -800,6 +828,13 @@ static int load_flat_file(struct linux_b
+
+ return 0;
+ err:
++ if (flush_happened) {
++ /*
++ * The parent process has already started running. We cannot allow the child to return back to user space
++ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
++ */
++ do_exit(SIGTERM);
++ }
+ return ret;
+ }
+
+--- a/fs/Kconfig.binfmt
++++ b/fs/Kconfig.binfmt
+@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
+ config BINFMT_ELF_FDPIC
+ bool "Kernel support for FDPIC ELF binaries"
+ default y
+- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
++ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
+ help
+ ELF FDPIC binaries are based on ELF, but allow the individual load
+ segments of a binary to be located in memory independently of each
+--- a/include/asm-generic/resource.h
++++ b/include/asm-generic/resource.h
+@@ -69,13 +69,16 @@
+ /*
+ * boot-time rlimit defaults for the init task:
+ */
++#ifndef CONFIG_ELF_CORE
++#define CONFIG_USER_ELF_CORE_SIZE 0
+#endif
+ #define INIT_RLIMITS \
+ { \
+ [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \
+- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \
++ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \
+ [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_NPROC] = { 0, 0 }, \
+ [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \
+--- a/include/linux/elf-em.h
++++ b/include/linux/elf-em.h
+@@ -41,6 +41,7 @@
+ * up with a final number.
+ */
+ #define EM_ALPHA 0x9026
++#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
+
+ /* Bogus old v850 magic number, used by old tools. */
+ #define EM_CYGNUS_V850 0x9080
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -151,6 +151,10 @@ struct dentry;
+ #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
+ #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
+
++#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */
++#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */
++#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */
+
-+ return ret;
-+}
+ struct fb_fix_screeninfo {
+ char id[16]; /* identification string eg "TT Builtin" */
+ unsigned long smem_start; /* Start of frame buffer mem */
+--- a/include/linux/if_ppp.h
++++ b/include/linux/if_ppp.h
+@@ -114,14 +114,14 @@ struct pppol2tp_ioc_stats {
+ __u16 tunnel_id; /* redundant */
+ __u16 session_id; /* if zero, get tunnel stats */
+ __u32 using_ipsec:1; /* valid only for session_id == 0 */
+- aligned_u64 tx_packets;
+- aligned_u64 tx_bytes;
+- aligned_u64 tx_errors;
+- aligned_u64 rx_packets;
+- aligned_u64 rx_bytes;
+- aligned_u64 rx_seq_discards;
+- aligned_u64 rx_oos_packets;
+- aligned_u64 rx_errors;
++ __u64 tx_packets;
++ __u64 tx_bytes;
++ __u64 tx_errors;
++ __u64 rx_packets;
++ __u64 rx_bytes;
++ __u64 rx_seq_discards;
++ __u64 rx_oos_packets;
++ __u64 rx_errors;
+ };
+
+ #define ifr__name b.ifr_ifrn.ifrn_name
+--- a/include/linux/oprofile.h
++++ b/include/linux/oprofile.h
+@@ -99,6 +99,8 @@ void oprofile_add_sample(struct pt_regs
+ */
+ void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel);
++void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
++ unsigned long event, int is_kernel, int cpu);
+
+ /* Use this instead when the PC value is not from the regs. Doesn't
+ * backtrace. */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -167,6 +167,9 @@
+ /* MAX3100 */
+ #define PORT_MAX3100 86
+
++/* Ubicom32 */
++#define PORT_UBI32_UARTTIO 87
+
-+static struct snd_pcm_ops snd_ubi32_pcm_ops = {
-+ .open = snd_ubi32_pcm_open, /* Open */
-+ .close = snd_ubi32_pcm_close, /* Close */
-+ .ioctl = snd_pcm_lib_ioctl, /* Generic IOCTL handler */
-+ .hw_params = snd_ubi32_pcm_hw_params, /* Hardware parameters/capabilities */
-+ .hw_free = snd_ubi32_pcm_hw_free, /* Free function for hw_params */
-+ .prepare = snd_ubi32_pcm_prepare,
-+ .trigger = snd_ubi32_pcm_trigger,
-+ .pointer = snd_ubi32_pcm_pointer,
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -317,4 +317,14 @@ static inline void *kzalloc_node(size_t
+ return kmalloc_node(size, flags | __GFP_ZERO, node);
+ }
+
++struct kmem_cache_size_info {
++ unsigned short page;
++ unsigned short order;
+};
+
+/*
-+ * Interrupt handler that gets called when the audio device
-+ * interrupts Linux
++ * get info on all the memory allocated by slab for this named cache
+ */
-+static irqreturn_t snd_ubi32_pcm_interrupt(int irq, void *appdata)
-+{
-+ struct snd_pcm *pcm = (struct snd_pcm *)appdata;
-+ struct ubi32_snd_priv *ubi32_priv = pcm->private_data;
-+ struct audio_dev_regs *adr = ubi32_priv->adr;
-+ struct snd_pcm_substream *substream;
-+ struct ubi32_snd_runtime_data *ubi32_rd;
-+ int dma_to_fill = 0;
-+
-+ /*
-+ * Check to see if the interrupt is for us
-+ */
-+ if (!(ubi32_priv->ar->int_status & (1 << ubi32_priv->irq_idx))) {
-+ return IRQ_NONE;
-+ }
-+
-+ /*
-+ * Clear the interrupt
-+ */
-+ ubi32_priv->ar->int_status &= ~(1 << ubi32_priv->irq_idx);
-+
-+ /*
-+ * We only have one stream since we don't mix. Therefore
-+ * we don't need to search through substreams.
-+ */
-+ if (ubi32_priv->is_capture) {
-+ substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
-+ } else {
-+ substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
-+ }
-+
-+ if (!substream->runtime) {
-+ snd_printk(KERN_WARNING "No runtime data\n");
-+ return IRQ_NONE;
-+ }
++extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data);
+
-+ ubi32_rd = substream->runtime->private_data;
+ #endif /* _LINUX_SLAB_H */
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -865,6 +865,12 @@ config ELF_CORE
+ help
+ Enable support for generating core dumps. Disabling saves about 4k.
+
++config USER_ELF_CORE_SIZE
++ int "user core dump size (10MB to 32MB)"
++ range 10485760 33554432
++ default 16777216
++ depends on ELF_CORE
+
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "Ubi32 ALSA interrupt\n");
+ config PCSPKR_PLATFORM
+ bool "Enable PC-Speaker support" if EMBEDDED
+ depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -2688,6 +2688,9 @@ static int m_show(struct seq_file *m, vo
+ /* Used by oprofile and other similar tools. */
+ seq_printf(m, " 0x%p", mod->module_core);
+
++#ifdef ARCH_PROC_MODULES_EXTRA
++ ARCH_PROC_MODULES_EXTRA(m, mod);
+#endif
-+
-+ if (ubi32_rd == NULL) {
-+ snd_printk(KERN_WARNING "No private data\n");
-+ return IRQ_NONE;
-+ }
-+
-+ // Check interrupt cause
-+ if (0) {
-+ // Handle the underflow case
-+ } else if ((adr->status & AUDIO_STATUS_PLAY_DMA0_REQUEST) ||
-+ (adr->status & AUDIO_STATUS_PLAY_DMA1_REQUEST)) {
-+ if (adr->status & AUDIO_STATUS_PLAY_DMA0_REQUEST) {
-+ dma_to_fill = 0;
-+ adr->status &= ~AUDIO_STATUS_PLAY_DMA0_REQUEST;
-+ } else if (adr->status & AUDIO_STATUS_PLAY_DMA1_REQUEST) {
-+ dma_to_fill = 1;
-+ adr->status &= ~AUDIO_STATUS_PLAY_DMA1_REQUEST;
-+ }
-+ ubi32_rd->period_ptr += ubi32_rd->period_size;
-+ if (ubi32_rd->period_ptr >= ubi32_rd->dma_buffer_end) {
-+ ubi32_rd->period_ptr = ubi32_rd->dma_buffer;
-+ }
-+ adr->dma_xfer_requests[dma_to_fill].ptr = (void *)ubi32_rd->period_ptr;
-+ adr->dma_xfer_requests[dma_to_fill].ctr = ubi32_rd->period_size;
-+ adr->dma_xfer_requests[dma_to_fill].active = 1;
-+#ifdef CONFIG_SND_DEBUG
-+ snd_printk(KERN_INFO "xfer_request %d ptr=0x%x ctr=%u\n", dma_to_fill, ubi32_rd->period_ptr, ubi32_rd->period_size);
+ /* Taints info */
+ if (mod->taints)
+ seq_printf(m, " %s", module_flags(mod, buf));
+@@ -2840,8 +2843,12 @@ void print_modules(void)
+ printk("Modules linked in:");
+ /* Most callers should already have preempt disabled, but make sure */
+ preempt_disable();
+- list_for_each_entry_rcu(mod, &modules, list)
++ list_for_each_entry_rcu(mod, &modules, list) {
+ printk(" %s%s", mod->name, module_flags(mod, buf));
++#ifdef ARCH_OOPS_MODULE_EXTRA
++ ARCH_OOPS_MODULE_EXTRA(mod);
+#endif
-+ adr->int_flags |= AUDIO_INT_FLAG_MORE_SAMPLES;
-+ snd_ubi32_vp_int_set(substream->pcm);
+ }
-+ // If we are interrupted by the VP, that means we completed
-+ // processing one period of audio. We need to inform the upper
-+ // layers of ALSA of this.
-+ snd_pcm_period_elapsed(substream);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+void __devexit snd_ubi32_pcm_remove(struct ubi32_snd_priv *ubi32_priv)
-+{
-+ struct snd_pcm *pcm = ubi32_priv->pcm;
-+ free_irq(ubi32_priv->rx_irq, pcm);
-+}
+ preempt_enable();
+ if (last_unloaded_module[0])
+ printk(" [last unloaded: %s]", last_unloaded_module);
+--- a/kernel/sched_clock.c
++++ b/kernel/sched_clock.c
+@@ -38,8 +38,7 @@
+ */
+ unsigned long long __attribute__((weak)) sched_clock(void)
+ {
+- return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+- * (NSEC_PER_SEC / HZ);
++ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
+ }
+
+ static __read_mostly int sched_clock_running;
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -621,7 +621,7 @@ config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ depends on DEBUG_KERNEL && \
+ (CRIS || M68K || M68KNOMMU || FRV || UML || \
+- AVR32 || SUPERH || BLACKFIN || MN10300) || \
++ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \
+ ARCH_WANT_FRAME_POINTERS
+ default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
+ help
+--- a/mm/Makefile
++++ b/mm/Makefile
+@@ -38,3 +38,5 @@ obj-$(CONFIG_SMP) += allocpercpu.o
+ endif
+ obj-$(CONFIG_QUICKLIST) += quicklist.o
+ obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
+
-+#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
-+#error "Change this table to match pcm.h"
-+#endif
-+static unsigned int rates[] __initdata = {5512, 8000, 11025, 16000, 22050,
-+ 32000, 44100, 48000, 64000, 88200,
-+ 96000, 176400, 192000};
++CFLAGS_slab.o := $(PROFILING) -O2
+--- a/mm/slab.c
++++ b/mm/slab.c
+@@ -4100,6 +4100,68 @@ out:
+
+ #ifdef CONFIG_SLABINFO
+
+
+/*
-+ * snd_ubi32_pcm_probe
++ * get info on all the memory allocated by slab for this named cache
+ */
-+int __devinit snd_ubi32_pcm_probe(struct ubi32_snd_priv *ubi32_priv, struct platform_device *pdev)
++int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data)
+{
-+ struct snd_pcm *pcm;
-+ int ret, err;
-+ int i;
-+ int j;
-+ int nrates;
-+ unsigned int rate_max = 0;
-+ unsigned int rate_min = 0xFFFFFFFF;
-+ unsigned int rate_mask = 0;
-+ struct audio_dev_regs *adr;
-+ struct resource *res_adr;
-+ struct resource *res_irq_tx;
-+ struct resource *res_irq_rx;
-+ struct ubi32pcm_platform_data *pdata;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata) {
-+ return -ENODEV;
-+ }
++ int res = 0;
++ int found = 0;
++ int node;
++ struct kmem_cache *cachep;
++ struct kmem_list3 *l3;
++ struct slab *slabp;
+
-+ /*
-+ * Get our resources, adr is the hardware driver base address
-+ * and the tx and rx irqs are used to communicate with the
-+ * hardware driver.
-+ */
-+ res_adr = platform_get_resource(pdev, IORESOURCE_MEM, AUDIO_MEM_RESOURCE);
-+ res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, AUDIO_TX_IRQ_RESOURCE);
-+ res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, AUDIO_RX_IRQ_RESOURCE);
-+ if (!res_adr || !res_irq_tx || !res_irq_rx) {
-+ snd_printk(KERN_WARNING "Could not get resources");
-+ return -ENODEV;
++ /* Find the cache in the chain of caches. */
++ mutex_lock(&cache_chain_mutex);
++ list_for_each_entry(cachep, &cache_chain, next) {
++ if (strcmp(cachep->name, name) == 0) {
++ found = 1;
++ break;
++ }
+ }
-+
-+ ubi32_priv->ar = (struct audio_regs *)res_adr->start;
-+ ubi32_priv->tx_irq = res_irq_tx->start;
-+ ubi32_priv->rx_irq = res_irq_rx->start;
-+ ubi32_priv->irq_idx = pdata->inst_num;
-+ ubi32_priv->adr = &(ubi32_priv->ar->adr[pdata->inst_num]);
-+
-+ /*
-+ * Check the version
-+ */
-+ adr = ubi32_priv->adr;
-+ if (adr->version != AUDIO_DEV_REGS_VERSION) {
-+ snd_printk(KERN_WARNING "This audio_dev_reg is not compatible with this driver\n");
-+ return -ENODEV;
++ mutex_unlock(&cache_chain_mutex);
++ if (!found) {
++ return 0;
+ }
++ for_each_online_node(node) {
++ l3 = cachep->nodelists[node];
++ if (!l3)
++ continue;
++ if (res >= max_data)
++ break;
++ check_irq_on();
++ spin_lock_irq(&l3->list_lock);
+
-+ /*
-+ * Find out the standard rates, also find max and min rates
-+ */
-+ for (i = 0; i < ARRAY_SIZE(rates); i++) {
-+ int found = 0;
-+ for (j = 0; j < adr->n_sample_rates; j++) {
-+ if (rates[i] == adr->sample_rates[j]) {
-+ /*
-+ * Check to see if it is supported by the dac
-+ */
-+ if ((rates[i] >= ubi32_priv->min_sample_rate) &&
-+ (!ubi32_priv->max_sample_rate ||
-+ (ubi32_priv->max_sample_rate && (rates[i] <= ubi32_priv->max_sample_rate)))) {
-+ found = 1;
-+ rate_mask |= (1 << i);
-+ nrates++;
-+ if (rates[i] < rate_min) {
-+ rate_min = rates[i];
-+ }
-+ if (rates[i] > rate_max) {
-+ rate_max = rates[i];
-+ }
-+ break;
-+ }
-+ }
++ list_for_each_entry(slabp, &l3->slabs_full, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
+ }
-+ if (!found) {
-+ rate_mask |= SNDRV_PCM_RATE_KNOT;
++ list_for_each_entry(slabp, &l3->slabs_partial, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
+ }
-+ }
-+
-+ snd_ubi32_pcm_hw.rates = rate_mask;
-+ snd_ubi32_pcm_hw.rate_min = rate_min;
-+ snd_ubi32_pcm_hw.rate_max = rate_max;
-+ ubi32_pcm_rates.count = adr->n_sample_rates;
-+ ubi32_pcm_rates.list = (unsigned int *)adr->sample_rates;
-+ ubi32_pcm_rates.mask = 0;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (adr->channel_mask & (1 << i)) {
-+ if (!snd_ubi32_pcm_hw.channels_min) {
-+ snd_ubi32_pcm_hw.channels_min = i;
-+ }
-+ snd_ubi32_pcm_hw.channels_max = i;
++ list_for_each_entry(slabp, &l3->slabs_free, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
+ }
-+ }
-+ snd_printk(KERN_INFO "Ubi32PCM: channels_min:%u channels_max:%u\n",
-+ snd_ubi32_pcm_hw.channels_min,
-+ snd_ubi32_pcm_hw.channels_max);
-+
-+ if (adr->caps & AUDIONODE_CAP_BE) {
-+ snd_ubi32_pcm_hw.formats |= SNDRV_PCM_FMTBIT_S16_BE;
-+ }
-+ if (adr->caps & AUDIONODE_CAP_LE) {
-+ snd_ubi32_pcm_hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
-+ }
-+
-+ snd_printk(KERN_INFO "Ubi32PCM: rates:%08x min:%u max:%u count:%d fmts:%016llx (%s)\n",
-+ snd_ubi32_pcm_hw.rates,
-+ snd_ubi32_pcm_hw.rate_min,
-+ snd_ubi32_pcm_hw.rate_max,
-+ ubi32_pcm_rates.count,
-+ snd_ubi32_pcm_hw.formats,
-+ ubi32_priv->is_capture ? "capture" : "playback");
-+
-+ if (ubi32_priv->is_capture) {
-+ ret = snd_pcm_new(ubi32_priv->card, "Ubi32 PCM", 0, 0, 1, &pcm);
-+ } else {
-+ ret = snd_pcm_new(ubi32_priv->card, "Ubi32 PCM", 0, 1, 0, &pcm);
-+ }
-+
-+ if (ret < 0) {
-+ return ret;
-+ }
-+
-+ pcm->private_data = ubi32_priv;
-+ ubi32_priv->pcm = pcm;
-+ ubi32_priv->pdata = pdata;
-+
-+ pcm->info_flags = 0;
-+
-+ strcpy(pcm->name, "Ubi32-PCM");
+
-+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
-+ snd_dma_continuous_data(GFP_KERNEL),
-+ 45*1024, 64*1024);
-+
-+ if (ubi32_priv->is_capture) {
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ubi32_pcm_ops);
-+ } else {
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ubi32_pcm_ops);
++ spin_unlock_irq(&l3->list_lock);
+ }
+
-+ /*
-+ * Start up the audio device
-+ */
-+ adr->int_flags |= AUDIO_INT_FLAG_COMMAND;
-+ adr->command = AUDIO_CMD_ENABLE;
-+ snd_ubi32_vp_int_set(pcm);
++ return res;
++}
+
+ static void print_slabinfo_header(struct seq_file *m)
+ {
+ /*
+--- a/scripts/mod/file2alias.c
++++ b/scripts/mod/file2alias.c
+@@ -774,6 +774,15 @@ void handle_moddevtable(struct module *m
+ + sym->st_value;
+ }
+
+ /*
-+ * Request IRQ
++ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
++ * and 0 size will break do_table since it adjust size to (size - id_size)
++ * this is to make sure st_size fall in range.
+ */
-+ err = request_irq(ubi32_priv->rx_irq, snd_ubi32_pcm_interrupt, IRQF_SHARED | IRQF_DISABLED, pcm->name, pcm);
-+ if (err) {
-+ snd_printk(KERN_WARNING "request_irq failed: irq=%d err=%d\n", ubi32_priv->rx_irq, err);
-+ return -ENODEV;
++ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
++ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
+ }
+
-+ return ret;
+ if (sym_is(symname, "__mod_pci_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct pci_device_id), "pci",
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -82,6 +82,8 @@ source "sound/parisc/Kconfig"
+
+ source "sound/soc/Kconfig"
+
++source "sound/ubicom32/Kconfig"
+
-+}
+ endif # SND
+
+ menuconfig SOUND_PRIME
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
projects / openwrt.git / blobdiff