menu "Linux System Utilities"
+config BUSYBOX_CONFIG_REV
+ bool "rev"
+ default n
+ help
+ Reverse lines of a file or files.
+
+config BUSYBOX_CONFIG_ACPID
+ bool "acpid"
+ default n
+ help
+ acpid listens to ACPI events coming either in textual form from
+ /proc/acpi/event (though it is marked deprecated it is still widely
+ used and _is_ a standard) or in binary form from specified evdevs
+ (just use /dev/input/event*).
+
+ It parses the event to retrieve ACTION and a possible PARAMETER.
+ It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+ (if the resulting path is a directory) or directly as an executable.
+
+ N.B. acpid relies on run-parts so have the latter installed.
+
+config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
+ bool "Accept and ignore redundant options"
+ default n
+ depends on BUSYBOX_CONFIG_ACPID
+ help
+ Accept and ignore compatibility options -g -m -s -S -v.
+
+config BUSYBOX_CONFIG_BLKID
+ bool "blkid"
+ default y
+ select BUSYBOX_CONFIG_VOLUMEID
+ help
+ Lists labels and UUIDs of all filesystems.
+ WARNING:
+ With all submodules selected, it will add ~8k to busybox.
+
config BUSYBOX_CONFIG_DMESG
bool "dmesg"
default y
help
- dmesg is used to examine or control the kernel ring buffer. When the
+ dmesg is used to examine or control the kernel ring buffer. When the
Linux kernel prints messages to the system log, they are stored in
- the kernel ring buffer. You can use dmesg to print the kernel's ring
+ the kernel ring buffer. You can use dmesg to print the kernel's ring
buffer, clear the kernel ring buffer, change the size of the kernel
ring buffer, and change the priority level at which kernel messages
- are also logged to the system console. Enable this option if you
+ are also logged to the system console. Enable this option if you
wish to enable the 'dmesg' utility.
config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
depends on BUSYBOX_CONFIG_DMESG
help
If you wish to scrub the syslog level from the output, say 'Y' here.
- The syslog level is a string prefixed to every line with the form "<#>".
+ The syslog level is a string prefixed to every line with the form
+ "<#>".
With this option you will see:
# dmesg
default n
help
fbset is used to show or change the settings of a Linux frame buffer
- device. The frame buffer device provides a simple and unique
- interface to access a graphics display. Enable this option
+ device. The frame buffer device provides a simple and unique
+ interface to access a graphics display. Enable this option
if you wish to enable the 'fbset' utility.
config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
depends on BUSYBOX_CONFIG_FBSET
help
This option enables extended fbset options, allowing one to set the
- framebuffer size, color depth, etc. interface to access a graphics
- display. Enable this option if you wish to enable extended fbset
+ framebuffer size, color depth, etc. interface to access a graphics
+ display. Enable this option if you wish to enable extended fbset
options.
config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
default n
help
fdflush is only needed when changing media on slightly-broken
- removable media drives. It is used to make Linux believe that a
+ removable media drives. It is used to make Linux believe that a
hardware disk-change switch has been actuated, which causes Linux to
- forget anything it has cached from the previous media. If you have
+ forget anything it has cached from the previous media. If you have
such a slightly-broken drive, you will need to run fdflush every time
- you change a disk. Most people have working hardware and can safely
+ you change a disk. Most people have working hardware and can safely
leave this disabled.
config BUSYBOX_CONFIG_FDFORMAT
default n
help
The fdisk utility is used to divide hard disks into one or more
- logical disks, which are generally called partitions. This utility
+ logical disks, which are generally called partitions. This utility
can be used to list and edit the set of partitions or BSD style
'disk slices' that are defined on a hard drive.
depends on BUSYBOX_CONFIG_FDISK
help
Enabling this option allows you to create or change a partition table
- and write those changes out to disk. If you leave this option
+ and write those changes out to disk. If you leave this option
disabled, you will only be able to view the partition table.
config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
help
Enabling this option allows you to do terribly unsafe things like
define arbitrary drive geometry, move the beginning of data in a
- partition, and similarly evil things. Unless you have a very good
+ partition, and similarly evil things. Unless you have a very good
reason you would be wise to leave this disabled.
config BUSYBOX_CONFIG_FINDFS
default n
select BUSYBOX_CONFIG_VOLUMEID
help
- This is similar to the findfs program that is part of the e2fsprogs
- package. However, the e2fsprogs version only support ext2/3. This
- version supports those in addition to FAT, swap, and ReiserFS.
+ Prints the name of a filesystem with given label or UUID.
WARNING:
With all submodules selected, it will add ~8k to busybox.
+config BUSYBOX_CONFIG_FLOCK
+ bool "flock"
+ default n
+ help
+ Manage locks from shell scripts
+
config BUSYBOX_CONFIG_FREERAMDISK
bool "freeramdisk"
default n
help
- Linux allows you to create ramdisks. This utility allows you to
+ Linux allows you to create ramdisks. This utility allows you to
delete them and completely free all memory that was used for the
- ramdisk. For example, if you boot Linux into a ramdisk and later
+ ramdisk. For example, if you boot Linux into a ramdisk and later
pivot_root, you may want to free the memory that is allocated to the
- ramdisk. If you have no use for freeing memory from a ramdisk, leave
+ ramdisk. If you have no use for freeing memory from a ramdisk, leave
this disabled.
config BUSYBOX_CONFIG_FSCK_MINIX
default n
help
The minix filesystem is a nice, small, compact, read-write filesystem
- with little overhead. It is not a journaling filesystem however and
+ with little overhead. It is not a journaling filesystem however and
can experience corruption if it is not properly unmounted or if the
- power goes off in the middle of a write. This utility allows you to
+ power goes off in the middle of a write. This utility allows you to
check for and attempt to repair any corruption that occurs to a minix
filesystem.
+config BUSYBOX_CONFIG_MKFS_EXT2
+ bool "mkfs_ext2"
+ default n
+ help
+ Utility to create EXT2 filesystems.
+
config BUSYBOX_CONFIG_MKFS_MINIX
bool "mkfs_minix"
default n
help
The minix filesystem is a nice, small, compact, read-write filesystem
- with little overhead. If you wish to be able to create minix filesystems
- this utility will do the job for you.
-
-comment "Minix filesystem support"
- depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+ with little overhead. If you wish to be able to create minix
+ filesystems this utility will do the job for you.
config BUSYBOX_CONFIG_FEATURE_MINIX2
bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
default n
depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
help
- If you wish to be able to create version 2 minix filesystems, enable this.
- If you enabled 'mkfs_minix' then you almost certainly want to be using the
- version 2 filesystem support.
+ If you wish to be able to create version 2 minix filesystems, enable
+ this. If you enabled 'mkfs_minix' then you almost certainly want to
+ be using the version 2 filesystem support.
+
+config BUSYBOX_CONFIG_MKFS_REISER
+ bool "mkfs_reiser"
+ default n
+ help
+ Utility to create ReiserFS filesystems.
+ Note: this applet needs a lot of testing and polishing.
+
+config BUSYBOX_CONFIG_MKFS_VFAT
+ bool "mkfs_vfat"
+ default n
+ help
+ Utility to create FAT32 filesystems.
config BUSYBOX_CONFIG_GETOPT
bool "getopt"
help
The getopt utility is used to break up (parse) options in command
lines to make it easy to write complex shell scripts that also check
- for legal (and illegal) options. If you want to write horribly
+ for legal (and illegal) options. If you want to write horribly
complex shell scripts, or use some horribly complex shell script
- written by others, this utility may be for you. Most people will
+ written by others, this utility may be for you. Most people will
wisely leave this disabled.
+config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
+ bool "Support option -l"
+ default n if BUSYBOX_CONFIG_LONG_OPTS
+ depends on BUSYBOX_CONFIG_GETOPT
+ help
+ Enable support for long options (option -l).
+
config BUSYBOX_CONFIG_HEXDUMP
bool "hexdump"
default y
config BUSYBOX_CONFIG_HD
bool "hd"
default n
- select BUSYBOX_CONFIG_HEXDUMP
+ depends on BUSYBOX_CONFIG_HEXDUMP
help
hd is an alias to hexdump -C.
default y
help
The hwclock utility is used to read and set the hardware clock
- on a system. This is primarily used to set the current time on
+ on a system. This is primarily used to set the current time on
shutdown in the hardware clock, so the hardware will keep the
correct time when Linux is _not_ running.
config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
bool "Support long options (--hctosys,...)"
default n
- depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_GETOPT_LONG
+ depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
help
- By default, the hwclock utility only uses short options. If you
+ By default, the hwclock utility only uses short options. If you
are overly fond of its long options, such as --hctosys, --utc, etc)
then enable this option.
depends on BUSYBOX_CONFIG_HWCLOCK
help
Starting with FHS 2.3, the adjtime state file is supposed to exist
- at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+ at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
to use the FHS behavior, answer Y here, otherwise answer N for the
classic /etc/adjtime path.
- http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+ pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
config BUSYBOX_CONFIG_IPCRM
bool "ipcrm"
default n
help
losetup is used to associate or detach a loop device with a regular
- file or block device, and to query the status of a loop device. This
+ file or block device, and to query the status of a loop device. This
version does not currently support enabling data encryption.
+config BUSYBOX_CONFIG_LSPCI
+ bool "lspci"
+ default n
+ help
+ lspci is a utility for displaying information about PCI buses in the
+ system and devices connected to them.
+
+ This version uses sysfs (/sys/bus/pci/devices) only.
+
+config BUSYBOX_CONFIG_LSUSB
+ bool "lsusb"
+ default n
+ help
+ lsusb is a utility for displaying information about USB buses in the
+ system and devices connected to them.
+
+ This version uses sysfs (/sys/bus/usb/devices) only.
+
config BUSYBOX_CONFIG_MDEV
bool "mdev"
default n
default n
depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
help
- Add support for regular expressions substitutions when renaming device.
+ Add support for regular expressions substitutions when renaming
+ device.
config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
bool "Support command execution at device addition/removal"
config BUSYBOX_CONFIG_MKSWAP
bool "mkswap"
- default n
+ default y
help
The mkswap utility is used to configure a file or disk partition as
- Linux swap space. This allows Linux to use the entire file or
+ Linux swap space. This allows Linux to use the entire file or
partition as if it were additional RAM, which can greatly increase
- the capability of low-memory machines. This additional memory is
+ the capability of low-memory machines. This additional memory is
much slower than real RAM, but can be very helpful at preventing your
applications being killed by the Linux out of memory (OOM) killer.
Once you have created swap space using 'mkswap' you need to enable
the swap space using the 'swapon' utility.
-config BUSYBOX_CONFIG_FEATURE_MKSWAP_V0
- bool "Version 0 support"
- default n
+config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
+ bool "UUID support"
+ default y
depends on BUSYBOX_CONFIG_MKSWAP
-# depends on MKSWAP && BUSYBOX_CONFIG_DEPRECATED
help
- Enable support for the old v0 style.
- If your kernel is older than 2.1.117, then v0 support is the
- only option.
+ Generate swap spaces with universally unique identifiers.
config BUSYBOX_CONFIG_MORE
bool "more"
default n
help
more is a simple utility which allows you to read text one screen
- sized page at a time. If you want to read text that is larger than
+ sized page at a time. If you want to read text that is larger than
the screen, and you are using anything faster than a 300 baud modem,
- you will probably find this utility very helpful. If you don't have
+ you will probably find this utility very helpful. If you don't have
any need to reading text files, you can leave this disabled.
config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP
help
This option allows utilities such as 'more' and 'top' to determine
- the size of the screen. If you leave this disabled, your utilities
+ the size of the screen. If you leave this disabled, your utilities
that display things on the screen will be especially primitive and
will be unable to determine the current screen size, and will be
unable to move the cursor.
-config BUSYBOX_CONFIG_VOLUMEID
- bool "Routines for detecting label and uuid on common filesystems"
- default n
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
- bool "Ext filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
- bool "Reiser filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
- bool "fat filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
- bool "hfs filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
- bool "jfs filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-### config FEATURE_VOLUMEID_UFS
-### bool "ufs filesystem"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
- bool "xfs filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
- bool "ntfs filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
- bool "iso9660 filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
- bool "udf filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
- bool "luks filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
- bool "linux swap filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-### config FEATURE_VOLUMEID_LVM
-### bool "lvm"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
- bool "cramfs filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-### config FEATURE_VOLUMEID_HPFS
-### bool "hpfs filesystem"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
- bool "romfs filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
- bool "sysv filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-### config FEATURE_VOLUMEID_MINIX
-### bool "minix filesystem"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### These only detect partition tables - not used (yet?)
-### config FEATURE_VOLUMEID_MAC
-### bool "mac filesystem"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-###
-### config FEATURE_VOLUMEID_MSDOS
-### bool "msdos filesystem"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
- bool "ocfs2 filesystem"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
-### config FEATURE_VOLUMEID_HIGHPOINTRAID
-### bool "highpoint raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### config FEATURE_VOLUMEID_ISWRAID
-### bool "intel raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### config FEATURE_VOLUMEID_LSIRAID
-### bool "lsi raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### config FEATURE_VOLUMEID_VIARAID
-### bool "via raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### config FEATURE_VOLUMEID_SILICONRAID
-### bool "silicon raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### config FEATURE_VOLUMEID_NVIDIARAID
-### bool "nvidia raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-### config FEATURE_VOLUMEID_PROMISERAID
-### bool "promise raid"
-### default n
-### depends on VOLUMEID
-### help
-### TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
- bool "linuxraid"
- default n
- depends on BUSYBOX_CONFIG_VOLUMEID
- help
- TODO
-
config BUSYBOX_CONFIG_MOUNT
bool "mount"
default y
help
All files and filesystems in Unix are arranged into one big directory
- tree. The 'mount' utility is used to graft a filesystem onto a
- particular part of the tree. A filesystem can either live on a block
+ tree. The 'mount' utility is used to graft a filesystem onto a
+ particular part of the tree. A filesystem can either live on a block
device, or it can be accessible over the network, as is the case with
- NFS filesystems. Most people using BusyBox will also want to enable
+ NFS filesystems. Most people using BusyBox will also want to enable
the 'mount' utility.
config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
The idea is to use such virtual filesystems in /etc/fstab.
config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
- bool "Support specifiying devices by label or UUID"
+ bool "Support specifying devices by label or UUID"
default n
depends on BUSYBOX_CONFIG_MOUNT
select BUSYBOX_CONFIG_VOLUMEID
help
This allows for specifying a device by label or uuid, rather than by
- name. This feature utilizes the same functionality as findfs.
+ name. This feature utilizes the same functionality as blkid/findfs.
+ This also enables label or uuid support for swapon.
config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
bool "Support mounting NFS file systems"
- default y
+ default n
depends on BUSYBOX_CONFIG_MOUNT
select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
select BUSYBOX_CONFIG_FEATURE_SYSLOG
bool "Support lots of -o flags in mount"
default y
help
- Without this, mount only supports ro/rw/remount. With this, it
+ Without this, mount only supports ro/rw/remount. With this, it
supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
noatime, diratime, nodiratime, loud, bind, move, shared, slave,
private, unbindable, rshared, rslave, rprivate, and runbindable.
default y
help
The pivot_root utility swaps the mount points for the root filesystem
- with some other mounted filesystem. This allows you to do all sorts
+ with some other mounted filesystem. This allows you to do all sorts
of wild and crazy things with your Linux system and is far more
powerful than 'chroot'.
- Note: This is for initrd in linux 2.4. Under initramfs (introduced
+ Note: This is for initrd in linux 2.4. Under initramfs (introduced
in linux 2.6) use switch_root instead.
config BUSYBOX_CONFIG_RDATE
the RFC868 protocol, which is built into the inetd daemon on most
systems.
+config BUSYBOX_CONFIG_RDEV
+ bool "rdev"
+ default n
+ help
+ Print the device node associated with the filesystem mounted at '/'.
+
config BUSYBOX_CONFIG_READPROFILE
bool "readprofile"
default n
help
The script makes typescript of terminal session.
+config BUSYBOX_CONFIG_SCRIPTREPLAY
+ bool "scriptreplay"
+ default n
+ help
+ This program replays a typescript, using timing information
+ given by script -t.
+
config BUSYBOX_CONFIG_SETARCH
bool "setarch"
default n
help
The linux32 utility is used to create a 32bit environment for the
- specified program (usually a shell). It only makes sense to have
+ specified program (usually a shell). It only makes sense to have
this util on a system that supports both 64bit and 32bit userland
(like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
config BUSYBOX_CONFIG_SWAPONOFF
bool "swaponoff"
- default n
+ default y
help
This option enables both the 'swapon' and the 'swapoff' utilities.
Once you have created some swap space using 'mkswap', you also need
- to enable your swap space with the 'swapon' utility. The 'swapoff'
+ to enable your swap space with the 'swapon' utility. The 'swapoff'
utility is used, typically at system shutdown, to disable any swap
- space. If you are not using any swap space, you can leave this
+ space. If you are not using any swap space, you can leave this
option disabled.
config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
default y
help
The switch_root utility is used from initramfs to select a new
- root device. Under initramfs, you have to use this instead of
- pivot_root. (Stop reading here if you don't care why.)
+ root device. Under initramfs, you have to use this instead of
+ pivot_root. (Stop reading here if you don't care why.)
Booting with initramfs extracts a gzipped cpio archive into rootfs
- (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
- or unmounted*, pivot_root will not work from initramfs. Instead,
+ (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+ or unmounted*, pivot_root will not work from initramfs. Instead,
switch_root deletes everything out of rootfs (including itself),
does a mount --move that overmounts rootfs with the new root, and
then execs the specified init program.
* Because the Linux kernel uses rootfs internally as the starting
and ending point for searching through the kernel's doubly linked
- list of active mount points. That's why.
+ list of active mount points. That's why.
config BUSYBOX_CONFIG_UMOUNT
bool "umount"
default y
help
- When you want to remove a mounted filesystem from its current mount point,
- for example when you are shutting down the system, the 'umount' utility is
- the tool to use. If you enabled the 'mount' utility, you almost certainly
- also want to enable 'umount'.
+ When you want to remove a mounted filesystem from its current mount
+ point, for example when you are shutting down the system, the
+ 'umount' utility is the tool to use. If you enabled the 'mount'
+ utility, you almost certainly also want to enable 'umount'.
config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
bool "Support option -a"
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
help
Enabling this feature allows automatic mounting of files (containing
- filesystem images) via the linux kernel's loopback devices. The mount
- command will detect you are trying to mount a file instead of a block
- device, and transparently associate the file with a loopback device.
- The umount command will also free that loopback device.
+ filesystem images) via the linux kernel's loopback devices.
+ The mount command will detect you are trying to mount a file instead
+ of a block device, and transparently associate the file with a
+ loopback device. The umount command will also free that loopback
+ device.
You can still use the 'losetup' utility (to manually associate files
with loop devices) if you need to do something advanced, such as
specify an offset or cryptographic options to the loopback device.
(If you don't want umount to free the loop device, use "umount -D".)
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
+ bool "Create new loopback devices if needed"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
+ help
+ Linux kernels >= 2.6.24 support unlimited loopback devices. They are
+ allocated for use when trying to use a loop device. The loop device
+ must however exist.
+
+ This feature lets mount to try to create next /dev/loopN device
+ if it does not find a free one.
+
config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
bool "Support for the old /etc/mtab file"
default n
select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
help
Historically, Unix systems kept track of the currently mounted
- partitions in the file "/etc/mtab". These days, the kernel exports
+ partitions in the file "/etc/mtab". These days, the kernel exports
the list of currently mounted partitions in "/proc/mounts", rendering
- the old mtab file obsolete. (In modern systems, /etc/mtab should be
+ the old mtab file obsolete. (In modern systems, /etc/mtab should be
a symlink to /proc/mounts.)
The only reason to have mount maintain an /etc/mtab file itself is if
If you must use this, keep in mind it's inherently brittle (for
example a mount under chroot won't update it), can't handle modern
features like separate per-process filesystem namespaces, requires
- that your /etc directory be writeable, tends to get easily confused
+ that your /etc directory be writable, tends to get easily confused
by --bind or --move mounts, won't update if you rename a directory
- that contains a mount point, and so on. (In brief: avoid.)
+ that contains a mount point, and so on. (In brief: avoid.)
About the only reason to use this is if you've removed /proc from
your kernel.
+config BUSYBOX_CONFIG_VOLUMEID
+ bool #No description makes it a hidden option
+ default n
+
+menu "Filesystem/Volume identification"
+ depends on BUSYBOX_CONFIG_VOLUMEID
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
+ bool "Ext filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
+ bool "btrfs filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
+ bool "Reiser filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
+ bool "fat filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
+ bool "hfs filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
+ bool "jfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_UFS
+### bool "ufs filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
+ bool "xfs filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
+ bool "ntfs filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
+ bool "iso9660 filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
+ bool "udf filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
+ bool "luks filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
+ bool "linux swap filesystem"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_LVM
+### bool "lvm"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
+ bool "cramfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_HPFS
+### bool "hpfs filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
+ bool "romfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
+ bool "sysv filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_MINIX
+### bool "minix filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### These only detect partition tables - not used (yet?)
+### config FEATURE_VOLUMEID_MAC
+### bool "mac filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+###
+### config FEATURE_VOLUMEID_MSDOS
+### bool "msdos filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
+ bool "ocfs2 filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_HIGHPOINTRAID
+### bool "highpoint raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_ISWRAID
+### bool "intel raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_LSIRAID
+### bool "lsi raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_VIARAID
+### bool "via raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_SILICONRAID
+### bool "silicon raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_NVIDIARAID
+### bool "nvidia raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_PROMISERAID
+### bool "promise raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
+ bool "linuxraid"
+ default y
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+endmenu
+
endmenu
projects / openwrt.git / blobdiff