kernel: change debounce logic in the gpio-buttons driver
[openwrt.git] / package / hostapd / Makefile
index 4a1c3f9..6b46796 100644 (file)
-# $Id$
+#
+# Copyright (C) 2006-2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostapd
-PKG_VERSION:=0.5.3
+PKG_VERSION:=20100108
 PKG_RELEASE:=1
-PKG_MD5SUM:=4e3134e8b0d86e831230f8c620fd81bb
-PKG_BUILDDEP:=madwifi
-
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(TOPDIR)/package/rules.mk
+PKG_REV:=d97572a40fd7ec77094e2e4ef83424a4c0f7e24d
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git
+PKG_SOURCE_SUBDIR:=hostapd-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_PROTO:=git
+
+PKG_BUILD_DEPENDS:= \
+       PACKAGE_kmod-madwifi:madwifi \
+       PACKAGE_kmod-mac80211:mac80211 \
+
+PKG_CONFIG_DEPENDS:= \
+       CONFIG_PACKAGE_kmod-ath9k \
+       CONFIG_PACKAGE_kmod-mac80211 \
+       CONFIG_PACKAGE_kmod-madwifi \
+       CONFIG_PACKAGE_hostapd \
+       CONFIG_PACKAGE_hostapd-mini \
+       CONFIG_PACKAGE_kmod-hostap
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+DRIVER_MAKEOPTS= \
+       CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \
+       CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \
+       CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
+       CONFIG_IEEE80211N=$(CONFIG_PACKAGE_kmod-ath9k)
+
+define Package/hostapd/Default
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=IEEE 802.1x Authenticator
+  URL:=http://hostap.epitest.fi/
+  DEPENDS:=@!TARGET_avr32 @!TARGET_etrax +PACKAGE_kmod-mac80211:libnl-tiny
+endef
 
 define Package/hostapd
-SECTION:=net
-CATEGORY:=Network
-DEPENDS:=+libopenssl
-TITLE:=IEEE 802.1x Authenticator
-DESCRIPTION:=IEEE 802.1x/WPA/EAP/RADIUS Authenticator
-URL:=http://hostap.epitest.fi/
+$(call Package/hostapd/Default)
+  TITLE+= (full)
+  VARIANT:=full
 endef
 
-define Package/hostapd/conffiles
-/etc/hostapd.conf
+define Package/hostapd/description
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
+ Authenticator.
 endef
 
 define Package/hostapd-mini
-$(call Package/hostapd)
-TITLE:=IEEE 802.1x Authenticator (WPA-PSK only)
-DEPENDS:=
-DESCRIPTION:=IEEE 802.1x/WPA/EAP/RADIUS Authenticator (WPA-PSK only)
+$(call Package/hostapd/Default)
+  TITLE+= (WPA-PSK only)
+  VARIANT:=mini
 endef
 
-define Package/hostapd-mini/conffiles
-/etc/hostapd.conf
+define Package/hostapd-mini/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
 endef
 
 define Package/hostapd-utils
-$(call Package/hostapd)
-DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini
-TITLE:=IEEE 802.1x Authenticator (utils)
-DESCRIPTION:=IEEE 802.1x/WPA/EAP/RADIUS Authenticator (command line utils)
-endef
-
-define Build/ConfigureTarget
-       $(CP) $(PKG_BUILD_DIR) $(PKG_BUILD_DIR)_$(1)
-       $(CP) ./files/$(1).config $(PKG_BUILD_DIR)_$(1)/.config
-endef
-
-define Build/CompileTarget
-       $(MAKE) -C $(PKG_BUILD_DIR)_$(1) \
-               $(TARGET_CONFIGURE_OPTS) \
-               OPTFLAGS="$(TARGET_CFLAGS)" \
-               CPPFLAGS="-I$(STAGING_DIR)/usr/include -I$(STAGING_DIR)/include -I$(STAGING_DIR)/usr/include/madwifi" \
-               LDFLAGS="-L$(STAGING_DIR)/usr/lib -L$(STAGING_DIR)/lib" \
-               hostapd hostapd_cli
-       $(CP) $(PKG_BUILD_DIR)_$(1)/hostapd_cli $(PKG_BUILD_DIR)/
+  $(call Package/hostapd/Default)
+  TITLE+= (utils)
+  DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini
 endef
 
-define Package/InstallTemplate
-       if [ \! -f "$(PKG_BUILD_DIR)_$(2)/hostapd" ]; then \
-               rm -f $(PKG_BUILD_DIR)/.built; \
-               $(MAKE) $(PKG_BUILD_DIR)/.built; \
-       fi
-       install -m0755 -d $$(1)/etc
-       install -m0600 $(PKG_BUILD_DIR)_$(2)/madwifi.conf $$(1)/etc/hostapd.conf
-       install -m0755 -d $$(1)/usr/sbin
-       install -m0755 $(PKG_BUILD_DIR)_$(2)/hostapd $$(1)/usr/sbin/
+define Package/hostapd-utils/description
+ This package contains a command line utility to control the
+ IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
 endef
 
-define Package/Template
- ifneq ($(CONFIG_PACKAGE_$(1)),)
-  define Build/Configure/$(2)
-       $(call Build/ConfigureTarget,$(2))
-  endef
-  define Build/Compile/$(2)
-       $(call Build/CompileTarget,$(2))
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
+  $(warning $(wildcard $(PKG_BUILD_DIR)/.config_*) != $(subst .configured_,.config_,$(STAMP_CONFIGURED)))
+  define Build/Configure/rebuild
+       rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
+       rm -f $(PKG_BUILD_DIR)/hostapd/*.o
+       rm -f $(PKG_BUILD_DIR)/src/drivers/drivers.o
+       rm -f $(PKG_BUILD_DIR)/.config_*
+       touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
   endef
- endif
-
- define Package/$(1)/install
-       $(call Package/InstallTemplate,$(1),$(2))
- endef
-endef
+endif
 
 define Build/Configure
-       $(call Build/Configure/default)
-       $(call Build/Configure/mini)
+       $(Build/Configure/rebuild)
+       $(CP) ./files/$(BUILD_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
 endef
 
+TARGET_CPPFLAGS := \
+       -I$(STAGING_DIR)/usr/include/libnl-tiny \
+       -I$(PKG_BUILD_DIR)/src/crypto \
+       $(TARGET_CPPFLAGS) \
+       -I$(STAGING_DIR)/usr/include/madwifi \
+       -I$(STAGING_DIR)/usr/include/mac80211 \
+       -DCONFIG_LIBNL20 \
+       -D_GNU_SOURCE
+
+ifdef CONFIG_PACKAGE_kmod-mac80211
+  TARGET_LDFLAGS += -lm -lnl-tiny
+endif
+
 define Build/Compile
-       $(call Build/Compile/default)
-       $(call Build/Compile/mini)
+       CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
+       $(MAKE) -C $(PKG_BUILD_DIR)/hostapd \
+               $(TARGET_CONFIGURE_OPTS) \
+               $(DRIVER_MAKEOPTS) \
+               LIBS="$(TARGET_LDFLAGS)" \
+               hostapd hostapd_cli
 endef
 
-define Build/Clean
-       rm -rf $(PKG_BUILD_DIR)_default
-       rm -rf $(PKG_BUILD_DIR)_mini
+define Package/hostapd/install
+       $(INSTALL_DIR) $(1)/etc/hotplug.d/net
+       $(INSTALL_DATA) ./files/hostapd.hotplug $(1)/etc/hotplug.d/net/
+       $(INSTALL_DIR) $(1)/lib/wifi
+       $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
+       $(INSTALL_DIR) $(1)/usr/sbin
+       $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
 endef
+Package/hostapd-mini/install = $(Package/hostapd/install)
 
 define Package/hostapd-utils/install
-       install -m0755 -d $(1)/usr/sbin
-       install -m0755 $(PKG_BUILD_DIR)/hostapd_cli $(1)/usr/sbin/
+       $(INSTALL_DIR) $(1)/usr/sbin
+       $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
 endef
 
-$(eval $(call Package/Template,hostapd,default))
-$(eval $(call Package/Template,hostapd-mini,mini))
-
 $(eval $(call BuildPackage,hostapd))
 $(eval $(call BuildPackage,hostapd-mini))
 $(eval $(call BuildPackage,hostapd-utils))
This page took 0.032577 seconds and 4 git commands to generate.