ramips: rt305x: rename LEDs on the DIR-300-B1

[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-whr-g300n.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
index b1f6daf..6313135 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
@@ -1,7 +1,7 @@
 /*
- *  Generic RT305x machine setup
+ *  Buffalo WHR-G300N board support
  *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -14,11 +14,25 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/mips_machine.h>
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
 
-#include "machine.h"
 #include "devices.h"
 
+#define WHR_G300N_GPIO_LED_DIAG                7
+#define WHR_G300N_GPIO_LED_ROUTER      9
+#define WHR_G300N_GPIO_LED_SECURITY    14
+
+#define WHR_G300N_GPIO_BUTTON_AOSS             0       /* active low */
+#define WHR_G300N_GPIO_BUTTON_RESET            10      /* active low */
+#define WHR_G300N_GPIO_BUTTON_ROUTER_ON                8       /* active low */
+#define WHR_G300N_GPIO_BUTTON_ROUTER_OFF       11      /* active low */
+
+#define WHR_G300N_BUTTONS_POLL_INTERVAL                20
+
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition whr_g300n_partitions[] = {
        {
@@ -49,7 +63,7 @@ static struct mtd_partition whr_g300n_partitions[] = {
                .offset = 0x3f0000,
                .size   = 0x010000,
        }, {
-               .name   = "openwrt",
+               .name   = "firmware",
                .offset = 0x050000,
                .size   = 0x3a0000,
        }
@@ -63,9 +77,68 @@ static struct physmap_flash_data whr_g300n_flash_data = {
 #endif
 };
 
+static struct gpio_led whr_g300n_leds_gpio[] __initdata = {
+       {
+               .name           = "whr-g300n:red:diag",
+               .gpio           = WHR_G300N_GPIO_LED_DIAG,
+               .active_low     = 1,
+       }, {
+               .name           = "whr-g300n:green:router",
+               .gpio           = WHR_G300N_GPIO_LED_ROUTER,
+               .active_low     = 1,
+       }, {
+               .name           = "whr-g300n:amber:security",
+               .gpio           = WHR_G300N_GPIO_LED_SECURITY,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_button whr_g300n_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .threshold      = 3,
+               .gpio           = WHR_G300N_GPIO_BUTTON_RESET,
+               .active_low     = 1,
+       }, {
+               .desc           = "aoss",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .threshold      = 3,
+               .gpio           = WHR_G300N_GPIO_BUTTON_AOSS,
+               .active_low     = 1,
+       }, {
+               .desc           = "router-off",
+               .type           = EV_KEY,
+               .code           = BTN_2,
+               .threshold      = 3,
+               .gpio           = WHR_G300N_GPIO_BUTTON_ROUTER_OFF,
+               .active_low     = 1,
+       }, {
+               .desc           = "router-on",
+               .type           = EV_KEY,
+               .code           = BTN_3,
+               .threshold      = 3,
+               .gpio           = WHR_G300N_GPIO_BUTTON_ROUTER_ON,
+               .active_low     = 1,
+       }
+};
+
 static void __init whr_g300n_init(void)
 {
+       rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
        rt305x_register_flash(0, &whr_g300n_flash_data);
+       rt305x_register_ethernet();
+       ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),
+                                 whr_g300n_leds_gpio);
+       ramips_register_gpio_buttons(-1, WHR_G300N_BUTTONS_POLL_INTERVAL,
+                                    ARRAY_SIZE(whr_g300n_gpio_buttons),
+                                    whr_g300n_gpio_buttons);
+       rt305x_register_wifi();
+       rt305x_register_wdt();
 }
 
-MIPS_MACHINE(RT305X_MACH_WHR_G300N, "Buffalo WHR-G300N", whr_g300n_init);
+MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N",
+            whr_g300n_init);