brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.

[openwrt.git] / target / linux / kirkwood / patches / 200-iconnect.patch

diff --git a/target/linux/kirkwood/patches/200-iconnect.patch b/target/linux/kirkwood/patches/200-iconnect.patch
index fd1e486..f8baae6 100644 (file)
--- a/target/linux/kirkwood/patches/200-iconnect.patch
+++ b/target/linux/kirkwood/patches/200-iconnect.patch
@@ -1,18 +1,18 @@
 --- a/arch/arm/mach-kirkwood/Makefile
 +++ b/arch/arm/mach-kirkwood/Makefile
 --- a/arch/arm/mach-kirkwood/Makefile
 +++ b/arch/arm/mach-kirkwood/Makefile

-@@ -8,6 +8,7 @@
- obj-$(CONFIG_MACH_DOCKSTAR)           += dockstar-setup.o
+@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG)          += sheeva

  obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)   += sheevaplug-setup.o
  obj-$(CONFIG_MACH_GURUPLUG)           += guruplug-setup.o
  obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)   += sheevaplug-setup.o
  obj-$(CONFIG_MACH_GURUPLUG)           += guruplug-setup.o

+ obj-$(CONFIG_MACH_DOCKSTAR)           += dockstar-setup.o

 +obj-$(CONFIG_MACH_ICONNECT)           += iconnect-setup.o
  obj-$(CONFIG_MACH_TS219)              += ts219-setup.o tsx1x-common.o
  obj-$(CONFIG_MACH_TS41X)              += ts41x-setup.o tsx1x-common.o
  obj-$(CONFIG_MACH_OPENRD)             += openrd-setup.o
 --- a/arch/arm/mach-kirkwood/Kconfig
 +obj-$(CONFIG_MACH_ICONNECT)           += iconnect-setup.o
  obj-$(CONFIG_MACH_TS219)              += ts219-setup.o tsx1x-common.o
  obj-$(CONFIG_MACH_TS41X)              += ts41x-setup.o tsx1x-common.o
  obj-$(CONFIG_MACH_OPENRD)             += openrd-setup.o
 --- a/arch/arm/mach-kirkwood/Kconfig

-+++ b/arch/arm/mach-kirkwood/Kconfig 
-@@ -105,6 +105,12 @@
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -130,6 +130,12 @@ config MACH_T5325

          Say 'Y' here if you want your kernel to support the
          Say 'Y' here if you want your kernel to support the

-         Seagate FreeAgent DockStar.
+         HP t5325 Thin Client.

  
 +config MACH_ICONNECT
 +      bool "Iomega iConnect Wireless"
  
 +config MACH_ICONNECT
 +      bool "Iomega iConnect Wireless"


@@ -23,9 +23,19 @@
  endmenu
  
  endif
  endmenu
  
  endif

---- /dev/null 
-+++ b/arch/arm/mach-kirkwood/iconnect-setup.c 
-@@ -0,0 +1,95 @@
+--- a/arch/arm/mach-kirkwood/mpp.h
++++ b/arch/arm/mach-kirkwood/mpp.h
+@@ -108,6 +108,7 @@
+ #define MPP11_SATA0_ACTn      MPP( 11, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+ 
+ #define MPP12_GPO             MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
++#define MPP12_GPIO            MPP( 12, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+ #define MPP12_SD_CLK          MPP( 12, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+ #define MPP12_AU_SPDIF0               MPP( 12, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+ #define MPP12_SPI_MOSI                MPP( 12, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+--- /dev/null
++++ b/arch/arm/mach-kirkwood/iconnect-setup.c
+@@ -0,0 +1,188 @@

 +/*
 + * arch/arm/mach-kirkwood/iconnect-setup.c
 + *
 +/*
 + * arch/arm/mach-kirkwood/iconnect-setup.c
 + *


@@ -43,6 +53,10 @@
 +#include <linux/mtd/partitions.h>
 +#include <linux/mv643xx_eth.h>
 +#include <linux/ethtool.h>
 +#include <linux/mtd/partitions.h>
 +#include <linux/mv643xx_eth.h>
 +#include <linux/ethtool.h>

++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/leds.h>

 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <mach/kirkwood.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <mach/kirkwood.h>


@@ -73,12 +87,100 @@
 +      .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
 +};
 +
 +      .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
 +};
 +

++static struct gpio_led iconnect_led_pins[] = {
++      {
++              .name                   = "iconnect:blue:power",
++              .default_trigger        = "default-on",
++              .gpio                   = 42,
++      },
++      {
++              .name                   = "iconnect:red:power",
++              .gpio                   = 43,
++      },
++      {
++              .name                   = "iconnect:blue:usb1",
++              .gpio                   = 44,
++      },
++      {
++              .name                   = "iconnect:blue:usb2",
++              .gpio                   = 45,
++      },
++      {
++              .name                   = "iconnect:blue:usb3",
++              .gpio                   = 46,
++      },
++      {
++              .name                   = "iconnect:blue:usb4",
++              .gpio                   = 47,
++      },
++      {
++              .name                   = "iconnect:blue:otb",
++              .gpio                   = 48,
++      },
++};
++
++static struct gpio_led_platform_data iconnect_led_data = {
++      .leds           = iconnect_led_pins,
++      .num_leds       = ARRAY_SIZE(iconnect_led_pins),
++};
++
++static struct platform_device iconnect_leds = {
++      .name   = "leds-gpio",
++      .id     = -1,
++      .dev    = {
++              .platform_data  = &iconnect_led_data,
++      }
++};
++
++#define ICONNECT_GPIO_KEY_RESET               12
++#define ICONNECT_GPIO_KEY_OTB         35
++
++#define ICONNECT_SW_RESET             0x00
++#define ICONNECT_SW_OTB                       0x01
++
++static struct gpio_keys_button iconnect_buttons[] = {
++              {
++              .type           = EV_SW,
++              .code           = ICONNECT_SW_RESET,
++              .gpio           = ICONNECT_GPIO_KEY_RESET,
++              .desc           = "Reset Button",
++              .active_low     = 1,
++              .debounce_interval = 100,
++              }, 
++              {
++              .type           = EV_SW,
++              .code           = ICONNECT_SW_OTB,
++              .gpio           = ICONNECT_GPIO_KEY_OTB,
++              .desc           = "OTB Button",
++              .active_low     = 1,
++              .debounce_interval = 100,
++              },
++};
++
++static struct gpio_keys_platform_data iconnect_button_data = {
++      .buttons        = iconnect_buttons,
++      .nbuttons       = ARRAY_SIZE(iconnect_buttons),
++};
++
++static struct platform_device iconnect_button_device = {
++      .name      = "gpio-keys",
++      .id          = -1,
++      .num_resources  = 0,
++      .dev        =   {
++                                      .platform_data  = &iconnect_button_data,
++                                      },
++};
++

 +static unsigned int iconnect_mpp_config[] __initdata = {
 +static unsigned int iconnect_mpp_config[] __initdata = {

-+      MPP8_TW_SDA,
-+      MPP9_TW_SCK,
-+      MPP10_UART0_TXD,
-+      MPP11_UART0_RXD,
-+      MPP28_GPIO,
++      MPP12_GPIO, /*Input for reset button*/
++      MPP35_GPIO, /*Input for OTB button*/
++      MPP42_GPIO,
++      MPP43_GPIO,
++      MPP44_GPIO,
++      MPP45_GPIO,
++      MPP46_GPIO,
++      MPP47_GPIO,
++      MPP48_GPIO,

 +      0
 +};
 +
 +      0
 +};
 +


@@ -100,12 +202,15 @@
 +
 +      kirkwood_uart0_init();
 +      kirkwood_i2c_init();
 +
 +      kirkwood_uart0_init();
 +      kirkwood_i2c_init();

++
++      platform_device_register(&iconnect_leds);
++      platform_device_register(&iconnect_button_device);

 +}
 +
 +static int __init iconnect_pci_init(void)
 +{
 +      if (machine_is_iconnect())
 +}
 +
 +static int __init iconnect_pci_init(void)
 +{
 +      if (machine_is_iconnect())

-+              kirkwood_pcie_init();
++              kirkwood_pcie_init(KW_PCIE0);

 +
 +      return 0;
 +}
 +
 +      return 0;
 +}


@@ -113,8 +218,6 @@
 +
 +
 +MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
 +
 +
 +MACHINE_START(ICONNECT, "Iomega iConnect Wireless")

-+      .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
-+      .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,

 +      .boot_params    = 0x00000100,
 +      .init_machine   = iconnect_init,
 +      .map_io         = kirkwood_map_io,
 +      .boot_params    = 0x00000100,
 +      .init_machine   = iconnect_init,
 +      .map_io         = kirkwood_map_io,