[brcm63xx] add support for USR9108 LEDs (#9372)

[openwrt.git] / target / linux / ixp4xx / patches-2.6.37 / 191-cambria_optional_uart.patch

diff --git a/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
index 099980b..603cf3c 100644 (file)
--- a/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
+++ b/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
@@ -124,7 +124,7 @@
        unsigned int            custom_divisor;
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -412,6 +412,20 @@ static void mem_serial_out(struct uart_p
+@@ -413,6 +413,20 @@ static void mem_serial_out(struct uart_p
        writeb(value, p->membase + offset);
  }
  
@@ -145,7 +145,7 @@
  static void mem32_serial_out(struct uart_port *p, int offset, int value)
  {
        offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -503,6 +517,11 @@ static void set_io_from_upio(struct uart
+@@ -504,6 +518,11 @@ static void set_io_from_upio(struct uart
                p->serial_out = mem32_serial_out;
                break;
  
@@ -157,7 +157,7 @@
        case UPIO_AU:
                p->serial_in = au_serial_in;
                p->serial_out = au_serial_out;
-@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
+@@ -535,6 +554,7 @@ serial_out_sync(struct uart_8250_port *u
        switch (p->iotype) {
        case UPIO_MEM:
        case UPIO_MEM32:
@@ -165,7 +165,7 @@
        case UPIO_AU:
        case UPIO_DWAPB:
                p->serial_out(p, offset, value);
-@@ -2476,6 +2496,7 @@ static int serial8250_request_std_resour
+@@ -2477,6 +2497,7 @@ static int serial8250_request_std_resour
        case UPIO_MEM32:
        case UPIO_MEM:
        case UPIO_DWAPB:
@@ -173,7 +173,7 @@
                if (!up->port.mapbase)
                        break;
  
-@@ -2513,6 +2534,7 @@ static void serial8250_release_std_resou
+@@ -2514,6 +2535,7 @@ static void serial8250_release_std_resou
        case UPIO_MEM32:
        case UPIO_MEM:
        case UPIO_DWAPB:
@@ -181,7 +181,7 @@
                if (!up->port.mapbase)
                        break;
  
-@@ -3024,6 +3046,7 @@ static int __devinit serial8250_probe(st
+@@ -3025,6 +3047,7 @@ static int __devinit serial8250_probe(st
                port.set_termios        = p->set_termios;
                port.pm                 = p->pm;
                port.dev                = &dev->dev;
@@ -189,7 +189,7 @@
                port.irqflags           |= irqflag;
                ret = serial8250_register_port(&port);
                if (ret < 0) {
-@@ -3173,6 +3196,7 @@ int serial8250_register_port(struct uart
+@@ -3174,6 +3197,7 @@ int serial8250_register_port(struct uart
                uart->port.iotype       = port->iotype;
                uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
                uart->port.mapbase      = port->mapbase;
@@ -199,7 +199,7 @@
                        uart->port.dev = port->dev;
 --- a/drivers/serial/serial_core.c
 +++ b/drivers/serial/serial_core.c
-@@ -2130,6 +2130,7 @@ uart_report_port(struct uart_driver *drv
+@@ -2129,6 +2129,7 @@ uart_report_port(struct uart_driver *drv
                snprintf(address, sizeof(address),
                         "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
                break;
@@ -207,7 +207,7 @@
        case UPIO_MEM:
        case UPIO_MEM32:
        case UPIO_AU:
-@@ -2550,6 +2551,7 @@ int uart_match_port(struct uart_port *po
+@@ -2549,6 +2550,7 @@ int uart_match_port(struct uart_port *po
        case UPIO_HUB6:
                return (port1->iobase == port2->iobase) &&
                       (port1->hub6   == port2->hub6);