ramips: UPF_FIXED_TYPE must be set for the serial ports
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / devices.c
index 46bf460..7d41b07 100644 (file)
@@ -10,6 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
 
@@ -150,7 +152,13 @@ static struct platform_device rt305x_esw_device = {
 
 void __init rt305x_register_ethernet(void)
 {
-       ramips_eth_data.sys_freq = rt305x_sys_freq;
+       struct clk *clk;
+
+       clk = clk_get(NULL, "sys");
+       if (IS_ERR(clk))
+               panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
+
+       ramips_eth_data.sys_freq = clk_get_rate(clk);
 
        platform_device_register(&rt305x_esw_device);
        platform_device_register(&rt305x_eth_device);
@@ -181,3 +189,31 @@ void __init rt305x_register_wifi(void)
 {
        platform_device_register(&rt305x_wifi_device);
 }
+
+static struct resource rt305x_wdt_resources[] = {
+       {
+               .start  = RT305X_TIMER_BASE,
+               .end    = RT305X_TIMER_BASE + RT305X_TIMER_SIZE - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device rt305x_wdt_device = {
+       .name           = "ramips-wdt",
+       .id             = -1,
+       .resource       = rt305x_wdt_resources,
+       .num_resources  = ARRAY_SIZE(rt305x_wdt_resources),
+};
+
+void __init rt305x_register_wdt(void)
+{
+       u32 t;
+
+       /* enable WDT reset output on pin SRAM_CS_N */
+       t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
+       t |= SYSTEM_CONFIG_SRAM_CS0_MODE_WDT <<
+            SYSTEM_CONFIG_SRAM_CS0_MODE_SHIFT;
+       rt305x_sysc_wr(t, SYSC_REG_SYSTEM_CONFIG);
+
+       platform_device_register(&rt305x_wdt_device);
+}
This page took 0.027588 seconds and 4 git commands to generate.