pppd: split files into netifd and non-netifd files, move the netifd ppp.sh file to...

[openwrt.git] / package / netifd / files / lib / netifd / proto / ppp.sh

diff --git a/package/netifd/files/lib/netifd/proto/ppp.sh b/package/netifd/files/lib/netifd/proto/ppp.sh
deleted file mode 100755 (executable)
index 5f549bf..0000000
--- a/package/netifd/files/lib/netifd/proto/ppp.sh
+++ /dev/null
@@ -1,183 +0,0 @@
-#!/bin/sh
-
-[ -x /usr/sbin/pppd ] || exit 0
-
-[ -n "$INCLUDE_ONLY" ] || {
-       . /etc/functions.sh
-       . ../netifd-proto.sh
-       init_proto "$@"
-}
-
-ppp_generic_init_config() {
-       proto_config_add_string "username"
-       proto_config_add_string "password"
-       proto_config_add_string "keepalive"
-       proto_config_add_int "demand"
-       proto_config_add_string "pppd_options"
-       proto_config_add_string "connect"
-       proto_config_add_string "disconnect"
-       proto_config_add_boolean "defaultroute"
-       proto_config_add_boolean "peerdns"
-       proto_config_add_boolean "ipv6"
-       proto_config_add_int "mtu"
-}
-
-ppp_generic_setup() {
-       local config="$1"; shift
-
-       json_get_var ipv6 ipv6
-       [ "$ipv6" = 1 ] || ipv6=""
-
-       json_get_var peerdns peerdns
-       [ "$peerdns" = 0 ] && peerdns="" || peerdns="1"
-
-       json_get_var defaultroute defaultroute
-       if [ "$defaultroute" = 1 ]; then
-               defaultroute="defaultroute replacedefaultroute";
-       else
-               defaultroute="nodefaultroute"
-       fi
-
-       json_get_var demand demand
-       if [ "${demand:-0}" -gt 0 ]; then
-               demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
-       else
-               demand="persist"
-       fi
-
-       [ -n "$mtu" ] || json_get_var mtu mtu
-
-       json_get_var keepalive keepalive
-       local interval="${keepalive##*[, ]}"
-       [ "$interval" != "$keepalive" ] || interval=5
-
-       json_get_var username username
-       json_get_var password password
-
-       [ -n "$connect" ] || json_get_var connect connect
-       [ -n "$disconnect" ] || json_get_var disconnect disconnect
-       json_get_var pppd_options pppd_options
-
-       proto_run_command "$config" /usr/sbin/pppd \
-               nodetach ipparam "$config" \
-               ifname "${proto:-ppp}-$config" \
-               ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
-               ${ipv6:++ipv6} $defaultroute \
-               ${peerdns:+usepeerdns} \
-               $demand maxfail 1 \
-               ${username:+user "$username" password "$password"} \
-               ${connect:+connect "$connect"} \
-               ${disconnect:+disconnect "$disconnect"} \
-               ip-up-script /lib/netifd/ppp-up \
-               ipv6-up-script /lib/netifd/ppp-up \
-               ip-down-script /lib/netifd/ppp-down \
-               ipv6-down-script /lib/netifd/ppp-down \
-               ${mtu:+mtu $mtu mru $mtu} \
-               $pppd_options "$@"
-}
-
-ppp_generic_teardown() {
-       local interface="$1"
-
-       case "$ERROR" in
-               11|19)
-                       proto_notify_error "$interface" AUTH_FAILED
-                       proto_block_restart "$interface"
-               ;;
-       esac
-       proto_kill_command "$interface"
-}
-
-# PPP on serial device
-
-proto_ppp_init_config() {
-       proto_config_add_string "device"
-       ppp_generic_init_config
-       no_device=1
-       available=1
-}
-
-proto_ppp_setup() {
-       local config="$1"
-
-       json_get_var device device
-       ppp_generic_setup "$config" "$device"
-}
-
-proto_ppp_teardown() {
-       ppp_generic_teardown "$@"
-}
-
-proto_pppoe_init_config() {
-       ppp_generic_init_config
-       proto_config_add_string "ac"
-       proto_config_add_string "service"
-}
-
-proto_pppoe_setup() {
-       local config="$1"
-       local iface="$2"
-
-       for module in slhc ppp_generic pppox pppoe; do
-               /sbin/insmod $module 2>&- >&-
-       done
-
-       json_get_var mtu mtu
-       mtu="${mtu:-1492}"
-
-       json_get_var ac ac
-       json_get_var service service
-
-       ppp_generic_setup "$config" \
-               plugin rp-pppoe.so \
-               ${ac:+rp_pppoe_ac "$ac"} \
-               ${service:+rp_pppoe_service "$service"} \
-               "nic-$iface"
-}
-
-proto_pppoe_teardown() {
-       ppp_generic_teardown "$@"
-}
-
-proto_pppoa_init_config() {
-       ppp_generic_init_config
-       proto_config_add_int "atmdev"
-       proto_config_add_int "vci"
-       proto_config_add_int "vpi"
-       proto_config_add_string "encaps"
-}
-
-proto_pppoa_setup() {
-       local config="$1"
-       local iface="$2"
-
-       for module in slhc ppp_generic pppox pppoatm; do
-               /sbin/insmod $module 2>&- >&-
-       done
-
-       json_get_var atmdev atmdev
-       json_get_var vci vci
-       json_get_var vpi vpi
-
-       json_get_var encaps encaps
-       case "$encaps" in
-               1|vc) encaps="vc-encaps" ;;
-               *) encaps="llc-encaps" ;;
-       esac
-
-       ppp_generic_setup "$config" \
-               plugin pppoatm.so \
-               ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
-               ${encaps}
-}
-
-proto_pppoa_teardown() {
-       ppp_generic_teardown "$@"
-}
-
-[ -n "$INCLUDE_ONLY" ] || {
-       add_protocol ppp
-       [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe
-       [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa
-}
-