[lantiq] bump kernel to 3.2.12

[openwrt.git] / target / linux / lantiq / files-3.2 / arch / mips / lantiq / xway / mach-p2601hnf1.c

diff --git a/target/linux/lantiq/files-3.2/arch/mips/lantiq/xway/mach-p2601hnf1.c b/target/linux/lantiq/files-3.2/arch/mips/lantiq/xway/mach-p2601hnf1.c
new file mode 100644 (file)
index 0000000..98c1181
--- /dev/null
+++ b/target/linux/lantiq/files-3.2/arch/mips/lantiq/xway/mach-p2601hnf1.c
@@ -0,0 +1,106 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/etherdevice.h>
+#include <linux/mdio-gpio.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "../dev-gpio-leds.h"
+#include "dev-dwc_otg.h"
+
+
+static struct mtd_partition p2601hnf1_partitions[] __initdata =
+{
+       {
+               .name   = "uboot",
+               .offset = 0x0,
+               .size   = 0x20000,
+       },
+/*     {
+               .name   = "uboot_env",
+               .offset = 0x20000,
+               .size   = 0x20000,
+       },
+*/     {
+               .name   = "linux",
+               .offset = 0x020000,
+               .size   = 0xfc0000,
+       },
+       {
+               .name   = "board_config",
+               .offset = 0xfe0000,
+               .size   = 0x20000,
+       },
+};
+
+static struct physmap_flash_data p2601hnf1_flash_data __initdata = {
+       .nr_parts       = ARRAY_SIZE(p2601hnf1_partitions),
+       .parts          = p2601hnf1_partitions,
+};
+
+static struct gpio_led p2601hnf1_leds_gpio[] __initdata = {
+       { .name = "soc:red:power", .gpio = 29, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:yellow:phone", .gpio = 64, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:green:phone", .gpio = 65, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:yellow:wlan", .gpio = 66, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:green:power", .gpio = 67, .active_low = 1, .default_trigger = "default-on" },
+       { .name = "soc:red:internet", .gpio = 68, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:green:internet", .gpio = 69, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:green:dsl", .gpio = 70, .active_low = 1, .default_trigger = "default-off" },
+       { .name = "soc:green:wlan", .gpio = 71, .active_low = 1, .default_trigger = "default-off" },
+};
+
+static struct gpio_button
+p2601hnf1_gpio_buttons[] /*__initdata*/ = {
+       { .desc = "reset", .type = EV_KEY, .code = BTN_0, .threshold = 3, .gpio = 53, .active_low = 1, },
+       { .desc = "wlan", .type = EV_KEY, .code = BTN_1, .threshold = 1, .gpio = 54, .active_low = 1, },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+       .mii_mode       = PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init
+p2601hnf1_init(void)
+{
+
+#define P2601HNF1_USB                  9
+
+       ltq_register_gpio_stp();
+       ltq_add_device_gpio_leds(-1, ARRAY_SIZE(p2601hnf1_leds_gpio), p2601hnf1_leds_gpio);
+       ltq_register_gpio_buttons(p2601hnf1_gpio_buttons, ARRAY_SIZE(p2601hnf1_gpio_buttons));
+       ltq_register_nor(&p2601hnf1_flash_data);
+       ltq_register_etop(&ltq_eth_data);
+       xway_register_dwc(P2601HNF1_USB);
+
+       // enable the ethernet ports on the SoC
+//     ltq_w32((ltq_r32(LTQ_GPORT_P0_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P0_CTL);
+//     ltq_w32((ltq_r32(LTQ_GPORT_P1_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P1_CTL);
+//     ltq_w32((ltq_r32(LTQ_GPORT_P2_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P2_CTL);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_P2601HNF1,
+                       "P2601HNF1",
+                       "ZyXEL P-2601HN-F1",
+                       p2601hnf1_init);
+