[lantiq] bump kernel to 3.2.12

[openwrt.git] / target / linux / lantiq / patches / 0025-MIPS-lantiq-activate-pull-up-resistors-when-gpio-is-.patch

diff --git a/target/linux/lantiq/patches/0025-MIPS-lantiq-activate-pull-up-resistors-when-gpio-is-.patch b/target/linux/lantiq/patches/0025-MIPS-lantiq-activate-pull-up-resistors-when-gpio-is-.patch
deleted file mode 100644 (file)
index f8146f7..0000000
--- a/target/linux/lantiq/patches/0025-MIPS-lantiq-activate-pull-up-resistors-when-gpio-is-.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 6efd9a5f303c4561eee14ae429b8c0fafa6c5a83 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 27 Oct 2011 20:06:30 +0200
-Subject: [PATCH 11/22] MIPS: lantiq: activate pull up resistors when gpio is
- a input
-
-The register that enables a gpios internal pullups was not set.
-
-Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/gpio.c |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
---- a/arch/mips/lantiq/xway/gpio.c
-+++ b/arch/mips/lantiq/xway/gpio.c
-@@ -21,6 +21,8 @@
- #define LTQ_GPIO_ALTSEL0      0x0C
- #define LTQ_GPIO_ALTSEL1      0x10
- #define LTQ_GPIO_OD           0x14
-+#define LTQ_GPIO_PUDSEL               0x1C
-+#define LTQ_GPIO_PUDEN                0x20
- 
- #define PINS_PER_PORT         16
- #define MAX_PORTS             3
-@@ -106,6 +108,8 @@ static int ltq_gpio_direction_input(stru
- 
-       ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
-       ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
-+      ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
-+      ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
- 
-       return 0;
- }
-@@ -117,6 +121,8 @@ static int ltq_gpio_direction_output(str
- 
-       ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
-       ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
-+      ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
-+      ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
-       ltq_gpio_set(chip, offset, value);
- 
-       return 0;