Enabled RTC (compiled in) for NSLU2 and NAS100d, and PATA (modules) for NAS100d

[openwrt.git] / target / linux / brcm-2.4 / config

diff --git a/target/linux/brcm-2.4/config b/target/linux/brcm-2.4/config
index c4cf534..2a6254b 100644 (file)
--- a/target/linux/brcm-2.4/config
+++ b/target/linux/brcm-2.4/config
@@ -1,5 +1,5 @@
 #
-# Automatically generated by make menuconfig: don't edit
+# Automatically generated make config: don't edit
 #
 CONFIG_MIPS=y
 CONFIG_MIPS32=y
@@ -91,7 +91,6 @@ CONFIG_PCI=y
 CONFIG_NONCOHERENT_IO=y
 CONFIG_NEW_TIME_C=y
 CONFIG_NEW_IRQ=y
-CONFIG_HND=y
 # CONFIG_MIPS_AU1000 is not set
 
 #
@@ -186,6 +185,10 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -251,6 +254,10 @@ CONFIG_MTD_SFLASH=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
 # CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
@@ -346,17 +353,17 @@ CONFIG_NET_IPGRE=m
 #
 CONFIG_IP_NF_CONNTRACK=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_CT_ACCT=m
 CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_CT_PROTO_GRE=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_MMS=m
 CONFIG_IP_NF_RTSP=m
+CONFIG_IP_NF_MMS=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=y
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -396,7 +403,6 @@ CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_LAYER7=m
 # CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_TARGET_MIRROR=m
@@ -407,13 +413,13 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_NAT_PROTO_GRE=m
+CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_MMS=m
 CONFIG_IP_NF_NAT_RTSP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_MMS=m
 CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_MANGLE=y
 CONFIG_IP_NF_TARGET_TOS=m
@@ -436,6 +442,10 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_IP_VS=m
 # CONFIG_IP_VS_DEBUG is not set
 CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS scheduler
+#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -446,6 +456,10 @@ CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
 CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 
@@ -481,6 +495,10 @@ CONFIG_IP6_NF_TARGET_IMQ=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 CONFIG_VLAN_8021Q=y
+
+#
+#  
+#
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_DECNET is not set
@@ -545,6 +563,10 @@ CONFIG_IDE=m
 # IDE, ATA and ATAPI Block devices
 #
 CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
 # CONFIG_BLK_DEV_HD_IDE is not set
 # CONFIG_BLK_DEV_HD is not set
 # CONFIG_BLK_DEV_IDE_SATA is not set
@@ -558,6 +580,10 @@ CONFIG_IDEDISK_STROKE=y
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
 # CONFIG_BLK_DEV_CMD640 is not set
 # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
 # CONFIG_BLK_DEV_ISAPNP is not set
@@ -615,12 +641,20 @@ CONFIG_BLK_DEV_PDC202XX=y
 # SCSI support
 #
 CONFIG_SCSI=m
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
 CONFIG_BLK_DEV_SD=m
 CONFIG_SD_EXTRA_DEVS=5
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
 # CONFIG_SCSI_DEBUG_QUEUES is not set
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
@@ -726,7 +760,6 @@ CONFIG_SCSI_MULTI_LUN=y
 # Network device support
 #
 CONFIG_NETDEVICES=y
-CONFIG_HND=y
 
 #
 # ARCnet devices
@@ -832,13 +865,20 @@ CONFIG_NET_RADIO=y
 # CONFIG_AIRONET4500_PROC is not set
 # CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
-CONFIG_WL=m
 # CONFIG_PLX_HERMES is not set
 # CONFIG_TMD_HERMES is not set
 # CONFIG_PCI_HERMES is not set
+
+#
+# Wireless Pcmcia cards support
+#
 # CONFIG_PCMCIA_HERMES is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_ATMEL is not set
+
+#
+# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
+#
 # CONFIG_PRISM54 is not set
 CONFIG_NET_WIRELESS=y
 
@@ -864,11 +904,19 @@ CONFIG_SHAPER=m
 # Amateur Radio support
 #
 CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
 CONFIG_AX25=m
 # CONFIG_AX25_DAMA_SLAVE is not set
 # CONFIG_NETROM is not set
 # CONFIG_ROSE is not set
 
+#
+# AX.25 network device drivers
+#
+
 #
 # AX.25 network device drivers
 #
@@ -899,6 +947,7 @@ CONFIG_MKISS=m
 #
 # CONFIG_INPUT is not set
 # CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_DUMMY_KEYB is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -934,6 +983,14 @@ CONFIG_PPDEV=m
 # Joysticks
 #
 # CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
 # CONFIG_QIC02_TAPE is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_IPMI_PANIC_EVENT is not set
@@ -1013,7 +1070,7 @@ CONFIG_EXT3_FS=m
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=m
 # CONFIG_UMSDOS_FS is not set
 CONFIG_VFAT_FS=m
 # CONFIG_EFS_FS is not set
@@ -1037,6 +1094,7 @@ CONFIG_JOLIET=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_MINIX_FS=m
+CONFIG_MINI_FO=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
 # CONFIG_NTFS_RW is not set
@@ -1165,6 +1223,10 @@ CONFIG_VIDEO_DEV=m
 #
 CONFIG_VIDEO_PROC_FS=y
 # CONFIG_I2C_PARPORT is not set
+
+#
+# Video Adapters
+#
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_BWQCAM is not set
@@ -1223,14 +1285,30 @@ CONFIG_SOUND=m
 #
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
+
+#
+# USB Host Controller Drivers
+#
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_UHCI is not set
 CONFIG_USB_UHCI_ALT=m
 CONFIG_USB_OHCI=m
+
+#
+# USB Device Class drivers
+#
 CONFIG_USB_AUDIO=m
 # CONFIG_USB_EMI26 is not set
+
+#
+#   USB Bluetooth can only be used with disabled Bluetooth subsystem
+#
 # CONFIG_USB_MIDI is not set
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1244,7 +1322,15 @@ CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+
+#
+# USB Human Interface Devices (HID)
+#
 # CONFIG_USB_HID is not set
+
+#
+#     Input core support is needed for USB HID input layer or HIDBP support
+#
 # CONFIG_USB_HIDINPUT is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_KBD is not set
@@ -1253,11 +1339,19 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_WACOM is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
+
+#
+# USB Imaging devices
+#
 # CONFIG_USB_DC2XX is not set
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_SCANNER is not set
 # CONFIG_USB_MICROTEK is not set
 # CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
 # CONFIG_USB_IBMCAM is not set
 # CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_OV511 is not set
@@ -1268,12 +1362,20 @@ CONFIG_USB_PWC=m
 # CONFIG_USB_VICAM is not set
 # CONFIG_USB_DSBR is not set
 # CONFIG_USB_DABUSB is not set
+
+#
+# USB Network adaptors
+#
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_CDCETHER is not set
 # CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
 # CONFIG_USB_USS720 is not set
 
 #
@@ -1301,6 +1403,10 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_TIGL is not set
@@ -1382,7 +1488,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 #
 # Library routines
 #
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 # CONFIG_FW_LOADER is not set