#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
DEPENDS:=kmod-pcmcia-core
KCONFIG:= \
CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
$(eval $(call KernelPackage,pcmcia-serial))
-# XXX: remove @!TARGET_* later when we have USB support properly detected on all targets
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT @!TARGET_atheros @!TARGET_uml
+ DEPENDS:=@USB_SUPPORT
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_MMC_BLOCK_BOUNCE=y \
CONFIG_MMC_SDHCI=n \
CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
ifeq ($(KERNEL),2.4)
WATCHDOG_DIR=char
endif
-ifeq ($(KERNEL_PATCHVER),2.6.24)
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
WATCHDOG_DIR=watchdog
endif
WATCHDOG_DIR?=char/watchdog
+define KernelPackage/atmel-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AT32AP700x watchdog
+ DEPENDS:=@TARGET_avr32
+ KCONFIG:=CONFIG_AT32AP700X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
$(eval $(call KernelPackage,softdog))
-# XXX: remove @TARGET_* later when we are able to detect the exact version of the kernel
define KernelPackage/leds-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO LED support
- DEPENDS:=@TARGET_adm5120
+ DEPENDS:= @GPIO_SUPPORT
KCONFIG:=CONFIG_LEDS_GPIO
FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
$(eval $(call KernelPackage,input-evdev))
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Input even device
+ DEPENDS:=+kmod-input-core +kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
define KernelPackage/input-polldev
SUBMENU:=$(OTHER_MENU)
TITLE:=Polled Input device support
define KernelPackage/input-gpio-buttons
SUBMENU:=$(OTHER_MENU)
TITLE:=Polled GPIO buttons input device
- DEPENDS:=+kmod-input-polldev @LINUX_2_6
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
KCONFIG:= \
CONFIG_INPUT_GPIO_BUTTONS \
CONFIG_INPUT_MISC=y
define KernelPackage/mmc-spi
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD over SPI Support
- DEPENDS:=@LINUX_2_6
+ DEPENDS:=@LINUX_2_6 +kmod-mmc +kmod-spi +kmod-crc-itu-t +kmod-crc7
KCONFIG:=CONFIG_MMC_SPI
FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
define KernelPackage/spi
SUBMENU:=$(OTHER_MENU)
- TITLE:=Serial Peripheral Interface
- DEPENDS:=@LINUX_2_6 +kmod-crc-itu-t +kmod-crc7
- KCONFIG:=CONFIG_SPI=y \
- CONFIG_MTD_DATAFLASH \
- CONFIG_MTD_M25P80 \
- CONFIG_SPI_AT25 \
- CONFIG_SPI_SPIDEV \
- CONFIG_SPI_TLE62X0
- FILES:= \
- $(LINUX_DIR)/drivers/spi/at25.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/spi/spidev.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/spi/tle62x0.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mtd/devices/m25p80.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mtd/devices/mtd_dataflash.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,spi)
+ TITLE:=Serial Peripheral Interface support
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=\
+ CONFIG_SPI=y \
+ CONFIG_SPI_MASTER=y
endef
define KernelPackage/spi/description
- This package contains the Serial Peripheral Interface driver
+ This package contains the Serial Peripheral Interface Master driver
endef
$(eval $(call KernelPackage,spi))
define KernelPackage/spi-bitbang
SUBMENU:=$(OTHER_MENU)
- TITLE:=Serial Peripheral Interface bitbanging
+ TITLE:=Serial Peripheral Interface bitbanging library
DEPENDS:=@LINUX_2_6 +kmod-spi
KCONFIG:=CONFIG_SPI_BITBANG
FILES:=$(LINUX_DIR)/drivers/spi/spi_bitbang.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/spi-bitbang/description
- This package contains the Serial Peripheral Interface bitbanging library
+ This package contains the SPI bitbanging library
endef
$(eval $(call KernelPackage,spi-bitbang))
+
+define KernelPackage/spi-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO based bitbanging SPI controller
+ DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
+ KCONFIG:=CONFIG_SPI_GPIO
+ FILES:=$(LINUX_DIR)/drivers/spi/spi_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,92,spi_gpio)
+endef
+
+define KernelPackage/spi-gpio/description
+ This package contains the GPIO based bitbanging SPI controller driver
+endef
+
+$(eval $(call KernelPackage,spi-gpio))
+
+define KernelPackage/spi-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=User mode SPI device driver
+ DEPENDS:=@LINUX_2_6 +kmod-spi
+ KCONFIG:=CONFIG_SPI_SPIDEV
+ FILES:=$(LINUX_DIR)/drivers/spi/spidev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,91,spidev)
+endef
+
+define KernelPackage/spi-dev/description
+ This package contains the user mode SPI device driver
+endef
+
+$(eval $(call KernelPackage,spi-dev))
+
+define KernelPackage/crypto-dev-ixp4xx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=IXP4xx crypto driver
+ DEPENDS:=\
+ @TARGET_ixp4xx +kmod-crypto-core +kmod-crypto-des +kmod-crypto-aead \
+ +kmod-crypto-authenc
+ KCONFIG:=\
+ CONFIG_CRYPTO_HW=y \
+ CONFIG_CRYPTO_DEV_IXP4XX
+ FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,ixp4xx_crypto)
+endef
+
+define KernelPackage/crypto-dev-ixp4xx/description
+ Kernel support for the IXP4xx HW crypto engine.
+endef
+
+$(eval $(call KernelPackage,crypto-dev-ixp4xx))
projects / openwrt.git / blobdiff