ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards

[openwrt.git] / target / linux / adm5120 / patches-2.6.34 / 120-rb153_cf_driver.patch

diff --git a/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch
index c8e2be4..c6d1660 100644 (file)
--- a/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/ata/Makefile
 +++ b/drivers/ata/Makefile
-@@ -77,6 +77,7 @@ obj-$(CONFIG_PATA_PLATFORM)  += pata_plat
+@@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM)  += pata_plat
  obj-$(CONFIG_PATA_AT91)       += pata_at91.o
  obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)     += pata_icside.o
@@ -10,7 +10,7 @@
  # Should be last but one libata driver
 --- a/drivers/ata/Kconfig
 +++ b/drivers/ata/Kconfig
-@@ -597,6 +597,15 @@ config PATA_RADISYS
+@@ -604,6 +604,15 @@ config PATA_RADISYS
  
          If unsure, say N.