refresh kernel config
[openwrt.git] / target / linux / atheros / patches-2.6.28 / 100-board.patch
index 7c4fad1..587094d 100644 (file)
@@ -82,7 +82,7 @@
 +obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
 --- /dev/null
 +++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,247 @@
+@@ -0,0 +1,249 @@
 +/*
 + * This file is subject to the terms and conditions of the GNU General Public
 + * License.  See the file "COPYING" in the main directory of this archive
 +              config = ar231x_board.config;
 +              if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
 +                      printk(KERN_INFO "Fixing up empty mac addresses\n");
++                      random_ether_addr(config->wlan0_mac);
++                      config->wlan0_mac[0] &= ~0x06;
 +                      random_ether_addr(config->enet0_mac);
 +                      random_ether_addr(config->enet1_mac);
 +              }
 +      .name = "leds-gpio",
 +      .id = -1,
 +      .dev.platform_data = (void *) &ar5312_led_data,
-+      .num_resources  = 1,
 +};
 +#endif
 +
 +              if (!ar231x_board.radio)
 +                      return 0;
 +
-+              if (*((u32 *) ar231x_board.radio) & AR531X_RADIO0_MASK)
++              if (*((u32 *) radio) & AR531X_RADIO0_MASK)
 +                      ar231x_add_wmac(0, AR531X_WLAN0,
 +                              AR5312_IRQ_WLAN0_INTRS);
 +
 +              break;
 +      }
 +
-+      if (*((u32 *) ar231x_board.radio) & AR531X_RADIO1_MASK)
++      if (*((u32 *) radio) & AR531X_RADIO1_MASK)
 +              ar231x_add_wmac(1, AR531X_WLAN1,
 +                      AR5312_IRQ_WLAN1_INTRS);
 +
 +      if ((result = ar231x_read_reg(AR5312_SCRATCH)))
 +              return result;
 +
-+      devid = ar231x_board.devid;
++      devid = ar231x_read_reg(AR531X_REV);
 +      devid &= AR531X_REV_MAJ;
 +      devid >>= AR531X_REV_MAJ_S;
 +      if (devid == AR531X_REV_MAJ_AR2313) {
 +      if (!IS_5312())
 +              return;
 +
-+      devid = ar231x_read_reg(AR531X_REV);
-+      devid &= AR531X_REV_MAJ | AR531X_REV_MIN;
-+
 +      /* Detect memory size */
 +      memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
 +      bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
 +              + (bank1AC ? (1 << (bank1AC+1)) : 0);
 +      memsize <<= 20;
 +      add_memory_region(0, memsize, BOOT_MEM_RAM);
-+      ar231x_gpiodev = &ar5312_gpiodev;
++
++      devid = ar231x_read_reg(AR531X_REV);
++      devid >>= AR531X_REV_WMAC_MIN_S;
++      devid &= AR531X_REV_CHIP;
 +      ar231x_board.devid = (u16) devid;
++      ar231x_gpiodev = &ar5312_gpiodev;
 +}
 +
 +void __init
 +
 --- /dev/null
 +++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,673 @@
+@@ -0,0 +1,677 @@
 +/*
 + * This file is subject to the terms and conditions of the GNU General Public
 + * License.  See the file "COPYING" in the main directory of this archive
 +
 +      if (pend) {
 +              bit = fls(pend) - 1;
-+              printk("GPIO IRQ: pend=0x%08x, val=%08x, bit=%d\n", pend, gpiointval, bit);
 +              pend &= ~(1 << bit);
 +              gpiointval ^= (1 << bit);
-+              printk("AFTER IRQ: pend=0x%08x, val=%08x, bit=%d\n", pend, gpiointval, bit);
 +      }
 +
 +      if (!pend)
 +{
 +      int i;
 +
++      if (!IS_2315())
++              return;
++
 +      ar231x_irq_dispatch = ar2315_irq_dispatch;
 +      gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
 +      for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
 +void __init
 +ar2315_time_init(void)
 +{
++      if (!IS_2315())
++              return;
++
 +      mips_hpt_frequency = ar2315_cpu_frequency() / 2;
 +}
 +
 +static inline u32
 +ar231x_read_reg(u32 reg)
 +{
-+      return __raw_readl((u32 *) reg);
++      return __raw_readl((u32 *) KSEG1ADDR(reg));
 +}
 +
 +static inline void
 +ar231x_write_reg(u32 reg, u32 val)
 +{
-+      __raw_writel(val, (u32 *)reg);
++      __raw_writel(val, (u32 *) KSEG1ADDR(reg));
 +}
 +
 +static inline u32
This page took 0.028136 seconds and 4 git commands to generate.