ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards

[openwrt.git] / target / linux / ixp4xx / patches-2.6.36 / 185-mi424wr_support.patch

diff --git a/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch
index d877380..d85d3d1 100644 (file)
--- a/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch
@@ -421,7 +421,7 @@
 +
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
 +
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile

-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX)                += ixdp42
+@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_COMPEX)                += ixdp42

  obj-pci-$(CONFIG_MACH_WRT300NV2)              += wrt300nv2-pci.o
  obj-pci-$(CONFIG_MACH_AP1000)         += ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_TW5334)         += tw5334-pci.o
  obj-pci-$(CONFIG_MACH_WRT300NV2)              += wrt300nv2-pci.o
  obj-pci-$(CONFIG_MACH_AP1000)         += ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_TW5334)         += tw5334-pci.o


@@ -429,7 +429,7 @@
  
  obj-y += common.o
  
  
  obj-y += common.o
  

-@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX)    += compex-setu
+@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_COMPEX)    += compex-setu

  obj-$(CONFIG_MACH_WRT300NV2)  += wrt300nv2-setup.o
  obj-$(CONFIG_MACH_AP1000)     += ap1000-setup.o
  obj-$(CONFIG_MACH_TW5334)     += tw5334-setup.o
  obj-$(CONFIG_MACH_WRT300NV2)  += wrt300nv2-setup.o
  obj-$(CONFIG_MACH_AP1000)     += ap1000-setup.o
  obj-$(CONFIG_MACH_TW5334)     += tw5334-setup.o


@@ -439,7 +439,7 @@
  obj-$(CONFIG_IXP4XX_QMGR)     += ixp4xx_qmgr.o
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
  obj-$(CONFIG_IXP4XX_QMGR)     += ixp4xx_qmgr.o
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig

-@@ -235,6 +235,13 @@ config MACH_GTWX5715
+@@ -243,6 +243,13 @@ config MACH_GTWX5715

                "High Speed" UART is n/c (as far as I can tell)
                20 Pin ARM/Xscale JTAG interface on J2
  
                "High Speed" UART is n/c (as far as I can tell)
                20 Pin ARM/Xscale JTAG interface on J2