-diff -Nur linux-2.6.17/drivers/net/b44.c linux-2.6.17-owrt/drivers/net/b44.c
---- linux-2.6.17/drivers/net/b44.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/b44.c 2006-06-18 16:24:14.000000000 +0200
+diff -urN linux-2.6.19.ref/drivers/net/b44.c linux-2.6.19/drivers/net/b44.c
+--- linux-2.6.19.ref/drivers/net/b44.c 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19/drivers/net/b44.c 2006-12-04 21:34:14.000000000 +0100
@@ -1,7 +1,9 @@
-/* b44.c: Broadcom 4400 device driver.
+/* b44.c: Broadcom 4400/47xx device driver.
*
* Distribute under GPL.
@@ -32,6 +34,28 @@
- #define DRV_MODULE_VERSION "1.00"
- #define DRV_MODULE_RELDATE "Apr 7, 2006"
+ #define DRV_MODULE_VERSION "1.01"
+ #define DRV_MODULE_RELDATE "Jun 16, 2006"
+#ifdef CONFIG_BCM947XX
+extern char *nvram_get(char *name);
#define B44_DEF_MSG_ENABLE \
(NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
-@@ -78,8 +102,8 @@
+@@ -87,8 +111,8 @@
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
-@@ -94,6 +118,10 @@
+@@ -103,6 +127,10 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ } /* terminate list with empty entry */
};
-@@ -132,17 +160,6 @@
+@@ -141,17 +169,6 @@
dma_desc_sync_size, dir);
}
static int b44_wait_bit(struct b44 *bp, unsigned long reg,
u32 bit, unsigned long timeout, const int clear)
{
-@@ -269,6 +286,10 @@
+@@ -278,6 +295,10 @@
break;
};
#endif
return 0;
}
-@@ -278,6 +299,30 @@
+@@ -287,6 +308,30 @@
== SBTMSLOW_CLOCK);
}
static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
{
u32 val;
-@@ -314,14 +359,14 @@
+@@ -323,14 +368,14 @@
bw32(bp, B44_IMASK, bp->imask);
}
(reg << MDIO_DATA_RA_SHIFT) |
(MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-@@ -330,18 +375,34 @@
+@@ -339,18 +384,34 @@
return err;
}
/* miilib interface */
/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
* due to code existing before miilib use was added to this driver.
-@@ -370,6 +431,8 @@
+@@ -379,6 +440,8 @@
u32 val;
int err;
err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
if (err)
return err;
-@@ -433,6 +496,22 @@
+@@ -442,6 +505,22 @@
u32 val;
int err;
if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
goto out;
if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -528,6 +607,19 @@
+@@ -537,6 +616,19 @@
{
u32 bmsr, aux;
if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
!b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
(bmsr != 0xffff)) {
-@@ -1282,9 +1374,10 @@
+@@ -1292,9 +1384,10 @@
bw32(bp, B44_DMARX_CTRL, 0);
bp->rx_prod = bp->rx_cons = 0;
} else {
}
ssb_core_reset(bp);
-@@ -1292,8 +1385,14 @@
+@@ -1302,8 +1395,14 @@
b44_clear_stats(bp);
/* Make PHY accessible. */
br32(bp, B44_MDIO_CTRL);
if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-@@ -1837,18 +1936,297 @@
+@@ -2034,18 +2133,297 @@
.get_perm_addr = ethtool_op_get_perm_addr,
};
+
+ b44_halt(bp);
+ b44_init_rings(bp);
-+ b44_init_hw(bp);
++ b44_init_hw(bp, 1);
+ netif_wake_queue(bp->dev);
+ spin_unlock_irq(&bp->lock);
+
+ if (bp->flags & B44_FLAG_PAUSE_AUTO) {
+ b44_halt(bp);
+ b44_init_rings(bp);
-+ b44_init_hw(bp);
++ b44_init_hw(bp, 1);
+ } else {
+ __b44_set_flow_ctrl(bp, bp->flags);
+ }
out:
return err;
}
-@@ -1868,27 +2246,60 @@
+@@ -2065,27 +2443,60 @@
static int __devinit b44_get_invariants(struct b44 *bp)
{
u8 eeprom[128];
/* With this, plus the rx_header prepended to the data by the
* hardware, we'll land the ethernet header on a 2-byte boundary.
-@@ -1898,7 +2309,6 @@
+@@ -2095,7 +2506,6 @@
bp->imask = IMASK_DEF;
bp->core_unit = ssb_core_unit(bp);
/* XXX - really required?
bp->flags |= B44_FLAG_BUGGY_TXPTR;
-@@ -2048,11 +2458,17 @@
+@@ -2246,11 +2656,17 @@
*/
b44_chip_reset(bp);
return 0;
err_out_iounmap:
-diff -Nur linux-2.6.17/drivers/net/b44.h linux-2.6.17-owrt/drivers/net/b44.h
---- linux-2.6.17/drivers/net/b44.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/b44.h 2006-06-18 16:01:10.000000000 +0200
-@@ -292,6 +292,10 @@
+diff -urN linux-2.6.19.ref/drivers/net/b44.h linux-2.6.19/drivers/net/b44.h
+--- linux-2.6.19.ref/drivers/net/b44.h 2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19/drivers/net/b44.h 2006-12-04 21:34:14.000000000 +0100
+@@ -297,6 +297,10 @@
#define SSB_PCI_MASK1 0xfc000000
#define SSB_PCI_MASK2 0xc0000000
/* 4400 PHY registers */
#define B44_MII_AUXCTRL 24 /* Auxiliary Control */
#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */
-@@ -345,6 +349,8 @@
+@@ -350,6 +354,8 @@
};
#define B44_MCAST_TABLE_SIZE 32
#define B44_STAT_REG_DECLARE \
_B44(tx_good_octets) \
-@@ -420,6 +426,7 @@
-
- u32 dma_offset;
- u32 flags;
-+#define B44_FLAG_INIT_COMPLETE 0x00000001
+@@ -428,6 +434,7 @@
+ #define B44_FLAG_B0_ANDLATER 0x00000001
#define B44_FLAG_BUGGY_TXPTR 0x00000002
#define B44_FLAG_REORDER_BUG 0x00000004
++#define B44_FLAG_INIT_COMPLETE 0x00000008
#define B44_FLAG_PAUSE_AUTO 0x00008000
+ #define B44_FLAG_FULL_DUPLEX 0x00010000
+ #define B44_FLAG_100_BASE_T 0x00020000