[x86] grub: Natively build grub only on x86 linux hosts, cross compile everywhere...

[openwrt.git] / package / madwifi / Makefile

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index 1cf9246..874438b 100644 (file)
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -1,5 +1,5 @@
 # 
 # 

-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org

 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.


@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi

-PKG_REV:=3280
+PKG_REV:=3314

 PKG_VERSION:=r$(PKG_REV)
 # PKG_BRANCH:=madwifi-dfs
 PKG_RELEASE:=1
 PKG_VERSION:=r$(PKG_REV)
 # PKG_BRANCH:=madwifi-dfs
 PKG_RELEASE:=1


@@ -25,7 +25,18 @@ PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trun
 
 include $(INCLUDE_DIR)/package.mk
 
 
 include $(INCLUDE_DIR)/package.mk
 

-# MADWIFI_DEBUG=1
+ifneq ($(CONFIG_TARGET_atheros),)
+  BUS:=AHB
+else
+  ifneq ($(CONFIG_PCI_SUPPORT),)
+    BUS:=PCI
+  endif
+endif
+
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
+  BUS:=
+endif

 
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf
 
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf


@@ -39,31 +50,40 @@ endif
 ifeq ($(ARCH),i686)
   HAL_TARGET:=i386-elf
 endif
 ifeq ($(ARCH),i686)
   HAL_TARGET:=i386-elf
 endif

-ifeq ($(ARCH),armeb)
+ifeq ($(BOARD),ixp4xx)

   HAL_TARGET:=xscale-be-elf
 endif
   HAL_TARGET:=xscale-be-elf
 endif

-ifeq ($(ARCH),arm)
+ifeq ($(BOARD),iop32x)
+  HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(BOARD),orion)

   HAL_TARGET:=xscale-le-elf
 endif
 ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif
   HAL_TARGET:=xscale-le-elf
 endif
 ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif

-
+ifeq ($(BOARD),storm)
+  HAL_TARGET:=armv4-le-elf
+endif

 ifneq ($(CONFIG_TARGET_atheros),)
 ifneq ($(CONFIG_TARGET_atheros),)

-  BUS:=AHB
-  HAL_TARGET:=ap51
-else
-  ifneq ($(CONFIG_PCI_SUPPORT),)
-    BUS:=PCI
-  endif
+  HAL_TARGET:=wisoc

 endif
 
 endif
 

-# XXX: remove this check later when we have PCI support properly detected on all targets
-ifneq ($(CONFIG_TARGET_uml),)
- BUS:=
+ifdef CONFIG_MADWIFI_RCA_MINSTREL
+  RATE_CONTROL:=minstrel
+endif
+
+ifdef CONFIG_MADWIFI_RCA_ONOE
+  RATE_CONTROL:=onoe

 endif
 
 endif
 

-RATE_CONTROL:=minstrel
+ifdef CONFIG_MADWIFI_RCA_AMRR
+  RATE_CONTROL:=amrr
+endif
+
+ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
+  RATE_CONTROL:=sample
+endif

 
 MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
 
 MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \


@@ -99,7 +119,7 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
 endif
 
 MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig
 endif
 
 MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig

-ifneq ($(MADWIFI_DEBUG),)
+ifdef CONFIG_MADWIFI_DEBUG

   MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
 endif
 
   MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
 endif
 


@@ -108,7 +128,7 @@ define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
   URL:=http://madwifi.org/
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
   URL:=http://madwifi.org/

-  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml

   FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
   FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef


@@ -117,6 +137,10 @@ define KernelPackage/madwifi/description
  This package contains a driver for Atheros 802.11a/b/g chipsets.
 endef
 
  This package contains a driver for Atheros 802.11a/b/g chipsets.
 endef
 

+define KernelPackage/madwifi/config
+       source "$(SOURCE)/Config.in"
+endef
+

 MAKE_ARGS:= \
        PATH="$(TARGET_PATH)" \
        ARCH="$(LINUX_KARCH)" \
 MAKE_ARGS:= \
        PATH="$(TARGET_PATH)" \
        ARCH="$(LINUX_KARCH)" \


@@ -128,11 +152,30 @@ MAKE_ARGS:= \
        LDOPTS="--no-warn-mismatch " \
        ATH_RATE="ath_rate/$(RATE_CONTROL)" \
        WARNINGS="-Wno-unused" \
        LDOPTS="--no-warn-mismatch " \
        ATH_RATE="ath_rate/$(RATE_CONTROL)" \
        WARNINGS="-Wno-unused" \

-       $(if $(MADWIFI_DEBUG),,DEBUG="") \
-       DOMULTI=1
+       $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG="") \
+       DO_MULTI=1

 
 MAKE_VARS:= \
 
 MAKE_VARS:= \

-       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
+       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
+
+HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
+ifneq ($(HALFILE),)
+  define Build/Prepare
+       $(call Build/Prepare/Default)
+       rm -rf $(PKG_BUILD_DIR)/tmp
+       mkdir -p $(PKG_BUILD_DIR)/tmp
+       tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+       $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
+       rm -rf $(PKG_BUILD_DIR)/tmp
+       # patch cflags
+       $(SED) 's, -E[LB],,' \
+               -e 's, -mips2,,' \
+               -e 's, -mapcs-32,,' \
+               $(PKG_BUILD_DIR)/hal/public/*.inc
+       $(SED) 's,march=armv4,march=armv5te,' \
+               $(PKG_BUILD_DIR)/hal/public/xscale*.inc
+  endef
+endif

 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb