hostapd: update to latest git version
[openwrt.git] / package / hostapd / patches / 800-dynamic_20_40_mhz.patch
diff --git a/package/hostapd/patches/800-dynamic_20_40_mhz.patch b/package/hostapd/patches/800-dynamic_20_40_mhz.patch
deleted file mode 100644 (file)
index a870e8e..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -1901,6 +1901,10 @@ struct hostapd_config * hostapd_config_r
-                                          "ht_capab", line);
-                               errors++;
-                       }
-+              } else if (os_strcmp(buf, "dynamic_ht40") == 0) {
-+                      conf->dynamic_ht40 = atoi(pos);
-+                      if (conf->dynamic_ht40 == 1)
-+                              conf->dynamic_ht40 = 1500;
-               } else if (os_strcmp(buf, "require_ht") == 0) {
-                       conf->require_ht = atoi(pos);
- #endif /* CONFIG_IEEE80211N */
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -394,6 +394,7 @@ struct hostapd_config {
-       int ieee80211n;
-       int secondary_channel;
-       int require_ht;
-+      int dynamic_ht40;
- };
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -27,6 +27,7 @@
- #include "beacon.h"
- #include "iapp.h"
- #include "ieee802_1x.h"
-+#include "ieee802_11.h"
- #include "ieee802_11_auth.h"
- #include "vlan_init.h"
- #include "wpa_auth.h"
-@@ -285,6 +286,7 @@ static void hostapd_cleanup_iface_pre(st
-  */
- static void hostapd_cleanup_iface(struct hostapd_iface *iface)
- {
-+      hostapd_deinit_ht(iface);
-       hostapd_free_hw_features(iface->hw_features, iface->num_hw_features);
-       iface->hw_features = NULL;
-       os_free(iface->current_rates);
---- a/src/ap/hostapd.h
-+++ b/src/ap/hostapd.h
-@@ -220,6 +220,9 @@ struct hostapd_iface {
-       /* Overlapping BSS information */
-       int olbc_ht;
-+      int force_20mhz;
-+      struct os_time last_20mhz_trigger;
-+
-       u16 ht_op_mode;
-       void (*scan_cb)(struct hostapd_iface *iface);
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -1242,6 +1242,9 @@ static void handle_beacon(struct hostapd
-                                            sizeof(mgmt->u.beacon)), &elems,
-                                     0);
-+      if (!elems.ht_capabilities)
-+              hostapd_trigger_20mhz(hapd->iface);
-+
-       ap_list_process_beacon(hapd->iface, mgmt, &elems, fi);
- }
---- a/src/ap/ieee802_11.h
-+++ b/src/ap/ieee802_11.h
-@@ -65,4 +65,17 @@ void hostapd_tx_status(struct hostapd_da
- void ieee802_11_rx_from_unknown(struct hostapd_data *hapd, const u8 *src,
-                               int wds);
-+#ifdef CONFIG_IEEE80211N
-+void hostapd_trigger_20mhz(struct hostapd_iface *iface);
-+void hostapd_deinit_ht(struct hostapd_iface *iface);
-+
-+#else
-+static inline void hostapd_deinit_ht(struct hostapd_iface *iface)
-+{
-+}
-+static inline void hostapd_trigger_20mhz(struct hostapd_iface *iface)
-+{
-+}
-+#endif /* CONFIG_IEEE80211N */
-+
- #endif /* IEEE802_11_H */
---- a/src/ap/ieee802_11_ht.c
-+++ b/src/ap/ieee802_11_ht.c
-@@ -20,9 +20,11 @@
- #include "drivers/driver.h"
- #include "hostapd.h"
- #include "ap_config.h"
-+#include "ap_drv_ops.h"
- #include "sta_info.h"
- #include "beacon.h"
- #include "ieee802_11.h"
-+#include "utils/eloop.h"
- u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid)
-@@ -70,12 +72,15 @@ u8 * hostapd_eid_ht_operation(struct hos
-       oper->control_chan = hapd->iconf->channel;
-       oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode);
--      if (hapd->iconf->secondary_channel == 1)
--              oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE |
--                      HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
--      if (hapd->iconf->secondary_channel == -1)
--              oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
--                      HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-+
-+      if (!hapd->iface->force_20mhz) {
-+              if (hapd->iconf->secondary_channel == 1)
-+                      oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE |
-+                              HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-+              if (hapd->iconf->secondary_channel == -1)
-+                      oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
-+                              HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-+      }
-       pos += sizeof(*oper);
-@@ -265,3 +270,80 @@ void hostapd_get_ht_capab(struct hostapd
-       neg_ht_cap->ht_capabilities_info = host_to_le16(cap);
- }
-+
-+static void hostapd_set_force_20mhz(struct hostapd_iface *iface);
-+
-+static void hostapd_restore_40mhz(void *eloop_data, void *user_ctx)
-+{
-+      struct hostapd_iface *iface = eloop_data;
-+      struct os_time time;
-+      int timeout;
-+
-+      if (!iface->last_20mhz_trigger.sec)
-+          return;
-+
-+      os_get_time(&time);
-+      timeout = iface->last_20mhz_trigger.sec + iface->conf->dynamic_ht40 -
-+                time.sec;
-+
-+      if (timeout > 0) {
-+              eloop_register_timeout(timeout, 0, hostapd_restore_40mhz,
-+                                     iface, NULL);
-+              return;
-+      }
-+
-+      iface->last_20mhz_trigger.sec = 0;
-+      iface->last_20mhz_trigger.usec = 0;
-+
-+      iface->force_20mhz = 0;
-+      hostapd_set_force_20mhz(iface);
-+}
-+
-+static void hostapd_set_force_20mhz(struct hostapd_iface *iface)
-+{
-+      int secondary_channel;
-+      int i;
-+
-+      ieee802_11_set_beacons(iface);
-+
-+      for (i = 0; i < iface->num_bss; i++) {
-+              struct hostapd_data *hapd = iface->bss[i];
-+
-+              if (iface->force_20mhz)
-+                      secondary_channel = 0;
-+              else
-+                      secondary_channel = hapd->iconf->secondary_channel;
-+
-+              if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq,
-+                                       hapd->iconf->channel,
-+                                       hapd->iconf->ieee80211n,
-+                                       secondary_channel)) {
-+                      wpa_printf(MSG_ERROR, "Could not set channel for "
-+                                 "kernel driver");
-+              }
-+      }
-+}
-+
-+void hostapd_deinit_ht(struct hostapd_iface *iface)
-+{
-+      eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL);
-+}
-+
-+void hostapd_trigger_20mhz(struct hostapd_iface *iface)
-+{
-+      if (!iface->conf->dynamic_ht40)
-+              return;
-+
-+      if (!iface->force_20mhz) {
-+              iface->force_20mhz = 1;
-+              hostapd_set_force_20mhz(iface);
-+      }
-+
-+      if (!iface->last_20mhz_trigger.sec) {
-+              eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL);
-+              eloop_register_timeout(iface->conf->dynamic_ht40, 0,
-+                                     hostapd_restore_40mhz, iface, NULL);
-+      }
-+
-+      os_get_time(&iface->last_20mhz_trigger);
-+}
This page took 0.025157 seconds and 4 git commands to generate.