ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default...

[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / pb92 / network

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/pb92/network b/target/linux/ar71xx/base-files/etc/defconfig/pb92/network
new file mode 100644 (file)
index 0000000..c2d3e1c
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/pb92/network
@@ -0,0 +1,31 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0.1
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
+
+config interface wan
+       option ifname   eth0.2
+       option proto    dhcp
+
+config switch
+        option name     eth0
+        option reset    1
+        option enable_vlan 1
+
+config switch_vlan
+        option device   eth0
+        option vlan     1
+        option ports    "0t 1 3 4 5"
+
+config switch_vlan
+        option device   eth0
+        option vlan     2
+        option ports    "0t 2"