generic: rtl8367: use the generic get_port_link implementation
[openwrt.git] / target / linux / generic / files / drivers / net / phy / ar8216.c
index 587f41f..1183cbc 100644 (file)
@@ -46,6 +46,9 @@ struct ar8216_priv {
        int chip;
        bool initialized;
        bool port4_phy;
+       char buf[80];
+
+       bool init;
 
        /* all fields below are cleared on reset */
        bool vlan;
@@ -74,14 +77,20 @@ static u32
 ar8216_mii_read(struct ar8216_priv *priv, int reg)
 {
        struct phy_device *phy = priv->phy;
+       struct mii_bus *bus = phy->bus;
        u16 r1, r2, page;
        u16 lo, hi;
 
        split_addr((u32) reg, &r1, &r2, &page);
-       phy->bus->write(phy->bus, 0x18, 0, page);
+
+       mutex_lock(&bus->mdio_lock);
+
+       bus->write(bus, 0x18, 0, page);
        msleep(1); /* wait for the page switch to propagate */
-       lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
-       hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
+       lo = bus->read(bus, 0x10 | r2, r1);
+       hi = bus->read(bus, 0x10 | r2, r1 + 1);
+
+       mutex_unlock(&bus->mdio_lock);
 
        return (hi << 16) | lo;
 }
@@ -90,17 +99,22 @@ static void
 ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
 {
        struct phy_device *phy = priv->phy;
+       struct mii_bus *bus = phy->bus;
        u16 r1, r2, r3;
        u16 lo, hi;
 
        split_addr((u32) reg, &r1, &r2, &r3);
-       phy->bus->write(phy->bus, 0x18, 0, r3);
-       msleep(1); /* wait for the page switch to propagate */
-
        lo = val & 0xffff;
        hi = (u16) (val >> 16);
-       phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
-       phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
+
+       mutex_lock(&bus->mdio_lock);
+
+       bus->write(bus, 0x18, 0, r3);
+       msleep(1); /* wait for the page switch to propagate */
+       bus->write(bus, 0x10 | r2, r1 + 1, hi);
+       bus->write(bus, 0x10 | r2, r1, lo);
+
+       mutex_unlock(&bus->mdio_lock);
 }
 
 static u32
@@ -143,6 +157,8 @@ ar8216_id_chip(struct ar8216_priv *priv)
        switch (id) {
        case 0x0101:
                return AR8216;
+       case 0x0301:
+               return AR8236;
        case 0x1000:
        case 0x1001:
                return AR8316;
@@ -151,8 +167,8 @@ ar8216_id_chip(struct ar8216_priv *priv)
                        "ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
                        (int)(id >> AR8216_CTRL_VERSION_S),
                        (int)(id & AR8216_CTRL_REVISION),
-                       priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 2),
-                       priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 3));
+                       mdiobus_read(priv->phy->bus, priv->phy->addr, 2),
+                       mdiobus_read(priv->phy->bus, priv->phy->addr, 3));
 
                return UNKNOWN;
        }
@@ -217,6 +233,59 @@ ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
        return 0;
 }
 
+static const char *ar8216_speed_str(unsigned speed)
+{
+       switch (speed) {
+       case AR8216_PORT_SPEED_10M:
+               return "10baseT";
+       case AR8216_PORT_SPEED_100M:
+               return "100baseT";
+       case AR8216_PORT_SPEED_1000M:
+               return "1000baseT";
+       }
+
+       return "unknown";
+}
+
+static int ar8216_port_get_link(struct switch_dev *dev,
+                               const struct switch_attr *attr,
+                               struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       u32 len;
+       u32 status;
+       int port;
+
+       port = val->port_vlan;
+
+       memset(priv->buf, '\0', sizeof(priv->buf));
+       status = priv->read(priv, AR8216_REG_PORT_STATUS(port));
+
+       if (status & AR8216_PORT_STATUS_LINK_UP) {
+               len = snprintf(priv->buf, sizeof(priv->buf),
+                               "port:%d link:up speed:%s %s-duplex %s%s%s",
+                               port,
+                               ar8216_speed_str((status &
+                                                 AR8216_PORT_STATUS_SPEED) >>
+                                                AR8216_PORT_STATUS_SPEED_S),
+                               (status & AR8216_PORT_STATUS_DUPLEX) ?
+                                       "full" : "half",
+                               (status & AR8216_PORT_STATUS_TXFLOW) ?
+                                       "txflow ": "",
+                               (status & AR8216_PORT_STATUS_RXFLOW) ?
+                                       "rxflow " : "",
+                               (status & AR8216_PORT_STATUS_LINK_AUTO) ?
+                                       "auto ": "");
+       } else {
+               len = snprintf(priv->buf, sizeof(priv->buf), "port:%d link:down",
+                               port);
+       }
+
+       val->value.s = priv->buf;
+       val->len = len;
+
+       return 0;
+}
 
 static int
 ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
@@ -327,6 +396,14 @@ static struct switch_attr ar8216_globals[] = {
 };
 
 static struct switch_attr ar8216_port[] = {
+       {
+               .type = SWITCH_TYPE_STRING,
+               .name = "link",
+               .description = "Get port link information",
+               .max = 1,
+               .set = NULL,
+               .get = ar8216_port_get_link,
+       },
 };
 
 static struct switch_attr ar8216_vlan[] = {
@@ -424,6 +501,56 @@ ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
        priv->write(priv, AR8216_REG_VTU, op);
 }
 
+static void
+ar8216_setup_port(struct ar8216_priv *priv, int port, u32 egress, u32 ingress,
+                 u32 members, u32 pvid)
+{
+       u32 header;
+
+       if (priv->vlan && port == AR8216_PORT_CPU && priv->chip == AR8216)
+               header = AR8216_PORT_CTRL_HEADER;
+       else
+               header = 0;
+
+       ar8216_rmw(priv, AR8216_REG_PORT_CTRL(port),
+                  AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
+                  AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
+                  AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
+                  AR8216_PORT_CTRL_LEARN | header |
+                  (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
+                  (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
+
+       ar8216_rmw(priv, AR8216_REG_PORT_VLAN(port),
+                  AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
+                  AR8216_PORT_VLAN_DEFAULT_ID,
+                  (members << AR8216_PORT_VLAN_DEST_PORTS_S) |
+                  (ingress << AR8216_PORT_VLAN_MODE_S) |
+                  (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
+}
+
+static void
+ar8236_setup_port(struct ar8216_priv *priv, int port, u32 egress, u32 ingress,
+                 u32 members, u32 pvid)
+{
+       ar8216_rmw(priv, AR8216_REG_PORT_CTRL(port),
+                  AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
+                  AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
+                  AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
+                  AR8216_PORT_CTRL_LEARN |
+                  (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
+                  (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
+
+       ar8216_rmw(priv, AR8236_REG_PORT_VLAN(port),
+                  AR8236_PORT_VLAN_DEFAULT_ID,
+                  (pvid << AR8236_PORT_VLAN_DEFAULT_ID_S));
+
+       ar8216_rmw(priv, AR8236_REG_PORT_VLAN2(port),
+                  AR8236_PORT_VLAN2_VLAN_MODE |
+                  AR8236_PORT_VLAN2_MEMBER,
+                  (ingress << AR8236_PORT_VLAN2_VLAN_MODE_S) |
+                  (members << AR8236_PORT_VLAN2_MEMBER_S));
+}
+
 static int
 ar8216_hw_apply(struct switch_dev *dev)
 {
@@ -436,7 +563,7 @@ ar8216_hw_apply(struct switch_dev *dev)
        ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
 
        memset(portmask, 0, sizeof(portmask));
-       if (priv->vlan) {
+       if (!priv->init) {
                /* calculate the port destination masks and load vlans
                 * into the vlan translation unit */
                for (j = 0; j < AR8X16_MAX_VLANS; j++) {
@@ -479,10 +606,13 @@ ar8216_hw_apply(struct switch_dev *dev)
                        pvid = i;
                }
 
-               if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
-                       egress = AR8216_OUT_ADD_VLAN;
+               if (priv->vlan) {
+                       if (priv->vlan_tagged & (1 << i))
+                               egress = AR8216_OUT_ADD_VLAN;
+                       else
+                               egress = AR8216_OUT_STRIP_VLAN;
                } else {
-                       egress = AR8216_OUT_STRIP_VLAN;
+                       egress = AR8216_OUT_KEEP;
                }
                if (priv->vlan) {
                        ingress = AR8216_IN_SECURE;
@@ -490,27 +620,40 @@ ar8216_hw_apply(struct switch_dev *dev)
                        ingress = AR8216_IN_PORT_ONLY;
                }
 
-               ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
-                       AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
-                       AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
-                       AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
-                       AR8216_PORT_CTRL_LEARN |
-                         (priv->vlan && i == AR8216_PORT_CPU && (priv->chip == AR8216) ?
-                          AR8216_PORT_CTRL_HEADER : 0) |
-                         (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
-                         (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
-
-               ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
-                       AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
-                         AR8216_PORT_VLAN_DEFAULT_ID,
-                       (portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
-                         (ingress << AR8216_PORT_VLAN_MODE_S) |
-                         (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
+               if (priv->chip == AR8236)
+                       ar8236_setup_port(priv, i, egress, ingress, portmask[i],
+                                         pvid);
+               else
+                       ar8216_setup_port(priv, i, egress, ingress, portmask[i],
+                                         pvid);
        }
        mutex_unlock(&priv->reg_mutex);
        return 0;
 }
 
+static int
+ar8236_hw_init(struct ar8216_priv *priv) {
+       static int initialized;
+       int i;
+       struct mii_bus *bus;
+
+       if (initialized)
+               return 0;
+
+       /* Initialize the PHYs */
+       bus = priv->phy->bus;
+       for (i = 0; i < 5; i++) {
+               mdiobus_write(bus, i, MII_ADVERTISE,
+                             ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
+                             ADVERTISE_PAUSE_ASYM);
+               mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
+       }
+       msleep(1000);
+
+       initialized = true;
+       return 0;
+}
+
 static int
 ar8316_hw_init(struct ar8216_priv *priv) {
        int i;
@@ -552,22 +695,22 @@ ar8316_hw_init(struct ar8216_priv *priv) {
                if ((i == 4) && priv->port4_phy &&
                    priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
                        /* work around for phy4 rgmii mode */
-                       bus->write(bus, i, MII_ATH_DBG_ADDR, 0x12);
-                       bus->write(bus, i, MII_ATH_DBG_DATA, 0x480c);
+                       mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x12);
+                       mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x480c);
                        /* rx delay */
-                       bus->write(bus, i, MII_ATH_DBG_ADDR, 0x0);
-                       bus->write(bus, i, MII_ATH_DBG_DATA, 0x824e);
+                       mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x0);
+                       mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x824e);
                        /* tx delay */
-                       bus->write(bus, i, MII_ATH_DBG_ADDR, 0x5);
-                       bus->write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
+                       mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x5);
+                       mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
                        msleep(1000);
                }
 
                /* initialize the port itself */
-               bus->write(bus, i, MII_ADVERTISE,
+               mdiobus_write(bus, i, MII_ADVERTISE,
                        ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-               bus->write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
-               bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
+               mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
+               mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
                msleep(1000);
        }
 
@@ -618,7 +761,8 @@ ar8216_reset_switch(struct switch_dev *dev)
        if (priv->chip == AR8216) {
                ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
                        AR8216_GCTRL_MTU, 1518 + 8 + 2);
-       } else if (priv->chip == AR8316) {
+       } else if (priv->chip == AR8316 ||
+                  priv->chip == AR8236) {
                /* enable jumbo frames */
                ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
                        AR8316_GCTRL_MTU, 9018 + 8 + 2);
@@ -732,6 +876,10 @@ ar8216_config_init(struct phy_device *pdev)
                        /* port 5 connected to the other mac, therefore unusable */
                        swdev->ports = (AR8216_NUM_PORTS - 1);
                }
+       } else if (priv->chip == AR8236) {
+               swdev->name = "Atheros AR8236";
+               swdev->vlans = AR8216_NUM_VLANS;
+               swdev->ports = AR8216_NUM_PORTS;
        } else {
                swdev->name = "Atheros AR8216";
                swdev->vlans = AR8216_NUM_VLANS;
@@ -742,6 +890,8 @@ ar8216_config_init(struct phy_device *pdev)
                goto done;
        }
 
+       priv->init = true;
+
        if (priv->chip == AR8316) {
                ret = ar8316_hw_init(priv);
                if (ret) {
@@ -750,6 +900,14 @@ ar8216_config_init(struct phy_device *pdev)
                }
        }
 
+       if (priv->chip == AR8236) {
+               ret = ar8236_hw_init(priv);
+               if (ret) {
+                       kfree(priv);
+                       goto done;
+               }
+       }
+
        ret = ar8216_reset_switch(&priv->dev);
        if (ret) {
                kfree(priv);
@@ -769,6 +927,8 @@ ar8216_config_init(struct phy_device *pdev)
                dev->netdev_ops = &priv->ndo;
        }
 
+       priv->init = false;
+
 done:
        return ret;
 }
@@ -844,7 +1004,7 @@ ar8216_remove(struct phy_device *pdev)
 
 static struct phy_driver ar8216_driver = {
        .phy_id         = 0x004d0000,
-       .name           = "Atheros AR8216/AR8316",
+       .name           = "Atheros AR8216/AR8236/AR8316",
        .phy_id_mask    = 0xffff0000,
        .features       = PHY_BASIC_FEATURES,
        .probe          = ar8216_probe,
This page took 0.035176 seconds and 4 git commands to generate.