* 02110-1301, USA.
*/
-#include <linux/config.h>
+#include <linux/autoconf.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/if.h>
MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
MODULE_LICENSE("GPL");
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,17)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
module_param(eecs, int, 0);
module_param(eesk, int, 0);
module_param(eedi, int, 0);
#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-#if defined(BCMGPIO2) || defined(BCMGPIO)
+#ifdef BROADCOM
extern char *nvram_get(char *name);
/* Return gpio pin number assigned to the named pin */
*
* 'def_pin' is returned if there is no such variable found.
*/
-static unsigned int getgpiopin(char *pin_name, unsigned int def_pin)
+static unsigned int get_gpiopin(char *pin_name, unsigned int def_pin)
{
char name[] = "gpioXXXX";
char *val;
int i, len = (bits + 7) / 8;
__u8 mask;
- gpioout(eecs, (cs ? eecs : 0));
+ gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
/* Bit bang from MSB to LSB */
for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
/* Output on rising edge */
- gpioout(eedi, ((mask & buf[i]) ? eedi : 0));
+ gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
udelay(EEDI_SETUP_TIME);
/* Clock high */
- gpioout(eesk, eesk);
+ gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
}
}
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
if (cs)
- gpioout(eecs, 0);
+ gpio_out(eecs, 0);
}
int i, len = (bits + 7) / 8;
__u8 mask;
- gpioout(eecs, (cs ? eecs : 0));
+ gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
__u8 gp;
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
/* Input on rising edge */
- gp = gpioin();
+ gp = gpio_in();
if (gp & eedi)
byte |= mask;
/* Clock high */
- gpioout(eesk, eesk);
+ gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
}
}
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
if (cs)
- gpioout(eecs, 0);
+ gpio_out(eecs, 0);
}
static void adm_enout(__u8 pins, __u8 val)
{
/* Prepare GPIO output value */
- gpioout(pins, val);
+ gpio_out(pins, val);
/* Enable GPIO outputs */
- gpioouten(pins, pins);
+ gpio_outen(pins, pins);
udelay(EECK_EDGE_TIME);
}
static void adm_disout(__u8 pins)
{
/* Disable GPIO outputs */
- gpioouten(pins, 0);
+ gpio_outen(pins, 0);
udelay(EECK_EDGE_TIME);
}
int i;
for (i = 0; i < clocks; i++) {
/* Clock high */
- gpioout(eesk, eesk);
+ gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
}
}
__u8 bits[6] = {
0xFF, 0xFF, 0xFF, 0xFF,
(0x06 << 4) | ((table & 0x01) << 3 | (addr&64)>>6),
- ((addr&62)<<2)
+ ((addr&63)<<2)
};
__u8 rbits[4];
{
int ret = 0;
-#if defined(BCMGPIO2) || defined(BCMGPIO)
+#ifdef BROADCOM
int boardflags = atoi(nvram_get("boardflags"));
+ int boardnum = atoi(nvram_get("boardnum"));
- if ((boardflags & 0x80) || force) {
+ if ((boardnum == 44) && (boardflags == 0x0388)) { /* Trendware TEW-411BRP+ */
ret = 1;
- eecs = getgpiopin("adm_eecs", 2);
- eesk = getgpiopin("adm_eesk", 3);
- eedi = getgpiopin("adm_eedi", 4);
- eerc = getgpiopin("adm_rc", 0);
+ eecs = get_gpiopin("adm_eecs", 2);
+ eesk = get_gpiopin("adm_eesk", 3);
+ eedi = get_gpiopin("adm_eedi", 4);
+ eerc = get_gpiopin("adm_rc", 5);
+
+ } else if ((boardflags & 0x80) || force) {
+ ret = 1;
+
+ eecs = get_gpiopin("adm_eecs", 2);
+ eesk = get_gpiopin("adm_eesk", 3);
+ eedi = get_gpiopin("adm_eedi", 4);
+ eerc = get_gpiopin("adm_rc", 0);
} else if ((strcmp(nvram_get("boardtype") ?: "", "bcm94710dev") == 0) &&
(strncmp(nvram_get("boardnum") ?: "", "42", 2) == 0)) {