/*
Module: rt2x00
Abstract: rt2x00 global information.
- Supported chipsets: RT2460, RT2560, RT2570,
- rt2561, rt2561s, rt2661, rt2571W & rt2671.
*/
#ifndef RT2X00_H
#include <linux/prefetch.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
+#include <linux/firmware.h>
#include <net/mac80211.h>
+#include "rt2x00debug.h"
+#include "rt2x00reg.h"
+#include "rt2x00ring.h"
+
/*
* Module information.
* DRV_NAME should be set within the individual module source files.
*/
-#define DRV_VERSION "2.0.2"
+#define DRV_VERSION "2.0.10"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
*/
#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
- wiphy_name(rt2x00dev->hw->wiphy), \
- __FUNCTION__, __lvl, ##__args)
+ wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args)
-#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
- printk(__kernlvl "%s -> %s: %s - " __msg, \
- DRV_NAME, __FUNCTION__, __lvl, ##__args)
+#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
+ printk(__kernlvl "%s -> %s: %s - " __msg, \
+ DRV_NAME, __FUNCTION__, __lvl, ##__args)
#ifdef CONFIG_RT2X00_DEBUG
-#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
+#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args);
-#else /* CONFIG_RT2X00_DEBUG */
-#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
+#else
+#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
do { } while (0)
#endif /* CONFIG_RT2X00_DEBUG */
/*
* Number of entries in a packet ring.
+ * PCI devices only need 1 Beacon entry,
+ * but USB devices require a second because they
+ * have to send a Guardian byte first.
*/
#define RX_ENTRIES 12
#define TX_ENTRIES 12
#define ATIM_ENTRIES 1
-#define BEACON_ENTRIES 1
+#define BEACON_ENTRIES 2
/*
* Standard timing and size defines.
+ * These values should follow the ieee80211 specifications.
*/
#define ACK_SIZE 14
#define IEEE80211_HEADER 24
/*
* IEEE802.11 header defines
*/
-#define is_rts_frame(__fc) \
- ( !!((((__fc) & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && \
- (((__fc) & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS)) )
-#define is_cts_frame(__fc) \
- ( !!((((__fc) & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && \
- (((__fc) & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS)) )
-#define is_probe_resp(__fc) \
- ( !!((((__fc) & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && \
- (((__fc) & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)) )
-
-/*
- * Interval defines
- */
-#define LINK_TUNE_INTERVAL ( round_jiffies(HZ) )
-#define RFKILL_POLL_INTERVAL ( HZ / 4 )
-
-/*
- * TX result flags.
- */
-enum TX_STATUS {
- TX_SUCCESS = 0,
- TX_SUCCESS_RETRY = 1,
- TX_FAIL_RETRY = 2,
- TX_FAIL_INVALID = 3,
- TX_FAIL_OTHER = 4,
-};
-
-/*
- * Antenna values
- */
-enum antenna {
- ANTENNA_DIVERSITY = 0,
- ANTENNA_A = 1,
- ANTENNA_B = 2,
-};
-
-/*
- * Led mode values.
- */
-enum led_mode {
- LED_MODE_DEFAULT = 0,
- LED_MODE_TXRX_ACTIVITY = 1,
- LED_MODE_SIGNAL_STRENGTH = 2,
- LED_MODE_ASUS = 3,
- LED_MODE_ALPHA = 4,
-};
-
-/*
- * Device states
- */
-enum dev_state {
- STATE_DEEP_SLEEP = 0,
- STATE_SLEEP = 1,
- STATE_STANDBY = 2,
- STATE_AWAKE = 3,
-
-/*
- * Additional device states, these values are
- * not strict since they are not directly passed
- * into the device.
- */
- STATE_RADIO_ON,
- STATE_RADIO_OFF,
- STATE_RADIO_RX_ON,
- STATE_RADIO_RX_OFF,
-};
-
-/*
- * IFS backoff values
- */
-enum ifs {
- IFS_BACKOFF = 0,
- IFS_SIFS = 1,
- IFS_NEW_BACKOFF = 2,
- IFS_NONE = 3,
-};
-
-/*
- * Cipher types for hardware encryption
- */
-enum cipher {
- CIPHER_NONE = 0,
- CIPHER_WEP64 = 1,
- CIPHER_WEP128 = 2,
- CIPHER_TKIP = 3,
- CIPHER_AES = 4,
-/*
- * The following fields were added by rt61pci and rt73usb.
- */
- CIPHER_CKIP64 = 5,
- CIPHER_CKIP128 = 6,
- CIPHER_TKIP_NO_MIC = 7,
-};
-
-/*
- * Register handlers.
- * We store the position of a register field inside a field structure,
- * This will simplify the process of setting and reading a certain field
- * inside the register while making sure the process remains byte order safe.
- */
-struct rt2x00_field8 {
- u8 bit_offset;
- u8 bit_mask;
-};
-
-struct rt2x00_field16 {
- u16 bit_offset;
- u16 bit_mask;
-};
-
-struct rt2x00_field32 {
- u32 bit_offset;
- u32 bit_mask;
-};
-
-/*
- * Power of two check from Linus Torvalds,
- * this will check if the mask that has been
- * given contains and contiguous set of bits.
- */
-#define is_power_of_two(x) ( !((x) & ((x)-1)) )
-#define low_bit_mask(x) ( ((x)-1) & ~(x) )
-#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
-
-#define FIELD8(__mask) \
-({ \
- BUILD_BUG_ON(!(__mask) || \
- !is_valid_mask(__mask) || \
- (__mask) != (u8)(__mask)); \
- (struct rt2x00_field8) { \
- __ffs(__mask), (__mask) \
- }; \
-})
-
-#define FIELD16(__mask) \
-({ \
- BUILD_BUG_ON(!(__mask) || \
- !is_valid_mask(__mask) || \
- (__mask) != (u16)(__mask));\
- (struct rt2x00_field16) { \
- __ffs(__mask), (__mask) \
- }; \
-})
-
-#define FIELD32(__mask) \
-({ \
- BUILD_BUG_ON(!(__mask) || \
- !is_valid_mask(__mask) || \
- (__mask) != (u32)(__mask));\
- (struct rt2x00_field32) { \
- __ffs(__mask), (__mask) \
- }; \
-})
-
-static inline void rt2x00_set_field32(u32 *reg,
- const struct rt2x00_field32 field, const u32 value)
-{
- *reg &= ~(field.bit_mask);
- *reg |= (value << field.bit_offset) & field.bit_mask;
-}
-
-static inline u32 rt2x00_get_field32(const u32 reg,
- const struct rt2x00_field32 field)
-{
- return (reg & field.bit_mask) >> field.bit_offset;
-}
-
-static inline void rt2x00_set_field16(u16 *reg,
- const struct rt2x00_field16 field, const u16 value)
+static inline int is_rts_frame(u16 fc)
{
- *reg &= ~(field.bit_mask);
- *reg |= (value << field.bit_offset) & field.bit_mask;
+ return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
+ ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS));
}
-static inline u16 rt2x00_get_field16(const u16 reg,
- const struct rt2x00_field16 field)
+static inline int is_cts_frame(u16 fc)
{
- return (reg & field.bit_mask) >> field.bit_offset;
+ return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
+ ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS));
}
-static inline void rt2x00_set_field8(u8 *reg,
- const struct rt2x00_field8 field, const u8 value)
+static inline int is_probe_resp(u16 fc)
{
- *reg &= ~(field.bit_mask);
- *reg |= (value << field.bit_offset) & field.bit_mask;
-}
-
-static inline u8 rt2x00_get_field8(const u8 reg,
- const struct rt2x00_field8 field)
-{
- return (reg & field.bit_mask) >> field.bit_offset;
+ return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
+ ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP));
}
/*
#define RT2460 0x0101
#define RT2560 0x0201
#define RT2570 0x1201
-#define RT2561 0x0301
-#define RT2561s 0x0302
+#define RT2561s 0x0301 /* Turbo */
+#define RT2561 0x0302
#define RT2661 0x0401
#define RT2571 0x1300
};
/*
- * data_desc
- * Each data entry also contains a descriptor which is used by the
- * device to determine what should be done with the packet and
- * what the current status is.
- * This structure is greatly simplified, but the descriptors
- * are basically a list of little endian 32 bit values.
- * Make the array by default 1 word big, this will allow us
- * to use sizeof() correctly.
- */
-struct data_desc {
- __le32 word[1];
-};
-
-/*
- * data_entry_desc
- * Summary of information that should be written into the
- * descriptor for sending a TX frame.
- */
-struct data_entry_desc {
- /*
- * PLCP values.
- */
- u16 length_high;
- u16 length_low;
- u16 signal;
- u16 service;
-
- int queue;
- int ifs;
-};
-
-/*
- * data_entry
- * The data ring is a list of data entries.
- * Each entry holds a reference to the descriptor
- * and the data buffer. For TX rings the reference to the
- * sk_buff of the packet being transmitted is also stored here.
+ * RF register values that belong to a particular channel.
*/
-struct data_entry {
- /*
- * Status flags
- */
- unsigned long flags;
-#define ENTRY_OWNER_NIC 1
-#define ENTRY_TXDONE 2
-#define ENTRY_TXD_RTS_FRAME 3
-#define ENTRY_TXD_OFDM_RATE 4
-#define ENTRY_TXD_MORE_FRAG 5
-#define ENTRY_TXD_REQ_TIMESTAMP 6
-#define ENTRY_TXD_REQ_ACK 7
-
- /*
- * Ring we belong to.
- */
- struct data_ring *ring;
-
- /*
- * sk_buff for the packet which is being transmitted
- * in this entry (Only used with TX related rings).
- */
- struct sk_buff *skb;
-
- /*
- * Store a ieee80211_tx_status structure in each
- * ring entry, this will optimize the txdone
- * handler.
- */
- struct ieee80211_tx_status tx_status;
-
- /*
- * private pointer specific to driver.
- */
- void *priv;
-
- /*
- * Data address for this entry.
- */
- void *data_addr;
- dma_addr_t data_dma;
-};
-
-/*
- * data_ring
- * Data rings are used by the device to send and receive packets.
- * The data_addr is the base address of the data memory.
- * To determine at which point in the ring we are,
- * have to use the rt2x00_ring_index_*() functions.
- */
-struct data_ring {
- /*
- * Pointer to main rt2x00dev structure where this
- * ring belongs to.
- */
- struct rt2x00_dev *rt2x00dev;
-
- /*
- * Base address for the device specific data entries.
- */
- struct data_entry *entry;
-
- /*
- * TX queue statistic info.
- */
- struct ieee80211_tx_queue_stats_data stats;
-
- /*
- * TX Queue parameters.
- */
- struct ieee80211_tx_queue_params tx_params;
-
- /*
- * Base address for data ring.
- */
- dma_addr_t data_dma;
- void *data_addr;
-
- /*
- * Index variables.
- */
- u16 index;
- u16 index_done;
-
- /*
- * Size of packet and descriptor in bytes.
- */
- u16 data_size;
- u16 desc_size;
+struct rf_channel {
+ int channel;
+ u32 rf1;
+ u32 rf2;
+ u32 rf3;
+ u32 rf4;
};
-/*
- * Handlers to determine the address of the current device specific
- * data entry, where either index or index_done points to.
- */
-static inline struct data_entry* rt2x00_get_data_entry(
- struct data_ring *ring)
-{
- return &ring->entry[ring->index];
-}
-
-static inline struct data_entry* rt2x00_get_data_entry_done(
- struct data_ring *ring)
-{
- return &ring->entry[ring->index_done];
-}
-
-/*
- * Total ring memory
- */
-static inline int rt2x00_get_ring_size(struct data_ring *ring)
-{
- return ring->stats.limit * (ring->desc_size + ring->data_size);
-}
-
-/*
- * Ring index manipulation functions.
- */
-static inline void rt2x00_ring_index_inc(struct data_ring *ring)
-{
- ring->index++;
- if (ring->index >= ring->stats.limit)
- ring->index = 0;
- ring->stats.len++;
-}
-
-static inline void rt2x00_ring_index_done_inc(struct data_ring *ring)
-{
- ring->index_done++;
- if (ring->index_done >= ring->stats.limit)
- ring->index_done = 0;
- ring->stats.len--;
- ring->stats.count++;
-}
-
-static inline void rt2x00_ring_index_clear(struct data_ring *ring)
-{
- ring->index = 0;
- ring->index_done = 0;
- ring->stats.len = 0;
- ring->stats.count = 0;
-}
-
-static inline int rt2x00_ring_empty(struct data_ring *ring)
-{
- return ring->stats.len == 0;
-}
-
-static inline int rt2x00_ring_full(struct data_ring *ring)
-{
- return ring->stats.len == ring->stats.limit;
-}
-
-static inline int rt2x00_ring_free(struct data_ring *ring)
-{
- if (ring->index_done >= ring->index)
- return ring->index_done - ring->index;
- return ring->stats.len - (ring->index - ring->index_done);
-}
-
-/*
- * TX/RX Descriptor access functions.
- */
-static inline void rt2x00_desc_read(struct data_desc *desc,
- const u8 word, u32 *value)
-{
- *value = le32_to_cpu(desc->word[word]);
-}
-
-static inline void rt2x00_desc_write(struct data_desc *desc,
- const u8 word, const u32 value)
-{
- desc->word[word] = cpu_to_le32(value);
-}
-
/*
* To optimize the quality of the link we need to store
* the quality of received frames and periodically
u32 count;
/*
- * Misc statistics.
+ * Statistics required for Link tuning.
* For the average RSSI value we use the "Walking average" approach.
* When adding RSSI to the average value the following calculation
* is needed:
*
- * avg_rssi = ((avg_rssi * 7) + rssi) / 8;
+ * avg_rssi = ((avg_rssi * 7) + rssi) / 8;
*
* The advantage of this approach is that we only need 1 variable
* to store the average in (No need for a count and a total).
* But more importantly, normal average values will over time
- * move less and less towards newly added values.
- * This means that with link tuning, the device can have a very
- * good RSSI for a few minutes but when the device is moved away
- * from the AP the average will not decrease fast enough to
- * compensate. The walking average compensates this and will
- * move towards the new values correctly.
+ * move less and less towards newly added values this results
+ * that with link tuning, the device can have a very good RSSI
+ * for a few minutes but when the device is moved away from the AP
+ * the average will not decrease fast enough to compensate.
+ * The walking average compensates this and will move towards
+ * the new values correctly allowing a effective link tuning.
*/
int avg_rssi;
+ int vgc_level;
int false_cca;
+ /*
+ * Statistics required for Signal quality calculation.
+ * For calculating the Signal quality we have to determine
+ * the total number of success and failed RX and TX frames.
+ * After that we also use the average RSSI value to help
+ * determining the signal quality.
+ * For the calculation we will use the following algorithm:
+ *
+ * rssi_percentage = (avg_rssi * 100) / rssi_offset
+ * rx_percentage = (rx_success * 100) / rx_total
+ * tx_percentage = (tx_success * 100) / tx_total
+ * avg_signal = ((WEIGHT_RSSI * avg_rssi) +
+ * (WEIGHT_TX * tx_percentage) +
+ * (WEIGHT_RX * rx_percentage)) / 100
+ *
+ * This value should then be checked to not be greated then 100.
+ */
+ int rx_percentage;
+ int rx_success;
+ int rx_failed;
+ int tx_percentage;
+ int tx_success;
+ int tx_failed;
+#define WEIGHT_RSSI 20
+#define WEIGHT_RX 40
+#define WEIGHT_TX 40
+
/*
* Work structure for scheduling periodic link tuning.
*/
struct delayed_work work;
};
+/*
+ * Clear all counters inside the link structure.
+ * This can be easiest achieved by memsetting everything
+ * except for the work structure at the end.
+ */
+static inline void rt2x00_clear_link(struct link *link)
+{
+ memset(link, 0x00, sizeof(*link) - sizeof(link->work));
+ link->rx_percentage = 50;
+ link->tx_percentage = 50;
+}
+
+/*
+ * Update the rssi using the walking average approach.
+ */
+static inline void rt2x00_update_link_rssi(struct link *link, int rssi)
+{
+ if (!link->avg_rssi)
+ link->avg_rssi = rssi;
+ else
+ link->avg_rssi = ((link->avg_rssi * 7) + rssi) / 8;
+}
+
+/*
+ * When the avg_rssi is unset or no frames have been received),
+ * we need to return the default value which needs to be less
+ * than -80 so the device will select the maximum sensitivity.
+ */
+static inline int rt2x00_get_link_rssi(struct link *link)
+{
+ return (link->avg_rssi && link->rx_success) ? link->avg_rssi : -128;
+}
+
/*
* Interface structure
* Configuration details about the current interface.
/*
* Current working type (IEEE80211_IF_TYPE_*).
- * This excludes the type IEEE80211_IF_TYPE_MNTR
- * since that is counted seperately in the monitor_count
- * field.
+ * When set to INVALID_INTERFACE, no interface is configured.
*/
int type;
+#define INVALID_INTERFACE IEEE80211_IF_TYPE_INVALID
/*
- * BBSID of the AP to associate with.
+ * MAC of the device.
*/
- u8 bssid[ETH_ALEN];
+ u8 mac[ETH_ALEN];
/*
- * Store the promisc mode for the current interface.
- * monitor mode always forces promisc mode to be enabled,
- * so we need to store the promisc mode seperately.
+ * BBSID of the AP to associate with.
*/
- short promisc;
+ u8 bssid[ETH_ALEN];
/*
- * Monitor mode count, the number of interfaces
- * in monitor mode that that have been added.
+ * Store the packet filter mode for the current interface.
*/
- short monitor_count;
+ unsigned int filter;
};
static inline int is_interface_present(struct interface *intf)
return !!intf->id;
}
-static inline int is_monitor_present(struct interface *intf)
+static inline int is_interface_type(struct interface *intf, int type)
{
- return !!intf->monitor_count;
+ return intf->type == type;
}
/*
/*
* Device/chipset specific value.
*/
- const u32 *chan_val_a;
- const u32 *chan_val_bg;
+ const struct rf_channel *channels;
+};
+
+/*
+ * Configuration structure wrapper around the
+ * mac80211 configuration structure.
+ * When mac80211 configures the driver, rt2x00lib
+ * can precalculate values which are equal for all
+ * rt2x00 drivers. Those values can be stored in here.
+ */
+struct rt2x00lib_conf {
+ struct ieee80211_conf *conf;
+ struct rf_channel rf;
+
+ int phymode;
+
+ int basic_rates;
+ int slot_time;
+
+ short sifs;
+ short pifs;
+ short difs;
+ short eifs;
};
/*
/*
* Device init handlers.
*/
- int (*init_hw)(struct rt2x00_dev *rt2x00dev);
- char* (*get_fw_name)(struct rt2x00_dev *rt2x00dev);
- int (*load_firmware)(struct rt2x00_dev *rt2x00dev, void *data,
- const size_t len);
+ int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
+ char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
+ int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data,
+ const size_t len);
/*
* Device initialization/deinitialization handlers.
*/
- int (*initialize)(struct rt2x00_dev *rt2x00dev);
- void (*uninitialize)(struct rt2x00_dev *rt2x00dev);
+ int (*initialize) (struct rt2x00_dev *rt2x00dev);
+ void (*uninitialize) (struct rt2x00_dev *rt2x00dev);
/*
* Radio control handlers.
*/
- int (*set_device_state)(struct rt2x00_dev *rt2x00dev,
- enum dev_state state);
- int (*rfkill_poll)(struct rt2x00_dev *rt2x00dev);
- void (*link_tuner)(struct rt2x00_dev *rt2x00dev);
+ int (*set_device_state) (struct rt2x00_dev *rt2x00dev,
+ enum dev_state state);
+ int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev);
+ void (*link_stats) (struct rt2x00_dev *rt2x00dev);
+ void (*reset_tuner) (struct rt2x00_dev *rt2x00dev);
+ void (*link_tuner) (struct rt2x00_dev *rt2x00dev);
/*
* TX control handlers
*/
- void (*write_tx_desc)(struct rt2x00_dev *rt2x00dev,
- struct data_entry *entry, struct data_desc *txd,
- struct data_entry_desc *desc,
- struct ieee80211_hdr *ieee80211hdr, unsigned int length,
- struct ieee80211_tx_control *control);
- int (*write_tx_data)(struct rt2x00_dev *rt2x00dev,
- struct data_ring *ring, struct sk_buff *skb,
- struct ieee80211_tx_control *control);
- void (*kick_tx_queue)(struct rt2x00_dev *rt2x00dev, int queue);
+ void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
+ struct data_desc *txd,
+ struct txdata_entry_desc *desc,
+ struct ieee80211_hdr *ieee80211hdr,
+ unsigned int length,
+ struct ieee80211_tx_control *control);
+ int (*write_tx_data) (struct rt2x00_dev *rt2x00dev,
+ struct data_ring *ring, struct sk_buff *skb,
+ struct ieee80211_tx_control *control);
+ int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
+ struct sk_buff *skb);
+ void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
+ unsigned int queue);
/*
* RX control handlers
*/
- int (*fill_rxdone)(struct data_entry *entry,
- int *signal, int *rssi, int *ofdm);
+ void (*fill_rxdone) (struct data_entry *entry,
+ struct rxdata_entry_desc *desc);
/*
* Configuration handlers.
*/
- void (*config_type)(struct rt2x00_dev *rt2x00dev, const int type);
- void (*config_phymode)(struct rt2x00_dev *rt2x00dev, const int phy);
- void (*config_channel)(struct rt2x00_dev *rt2x00dev, const int value,
- const int channel, const int txpower);
- void (*config_mac_addr)(struct rt2x00_dev *rt2x00dev, u8 *mac);
- void (*config_bssid)(struct rt2x00_dev *rt2x00dev, u8 *bssid);
- void (*config_promisc)(struct rt2x00_dev *rt2x00dev, const int promisc);
- void (*config_txpower)(struct rt2x00_dev *rt2x00dev, const int txpower);
- void (*config_antenna)(struct rt2x00_dev *rt2x00dev,
- const int antenna_tx, const int antenna_rx);
- void (*config_duration)(struct rt2x00_dev *rt2x00dev,
- const int short_slot_time, const int beacon_int);
+ void (*config_mac_addr) (struct rt2x00_dev *rt2x00dev, __le32 *mac);
+ void (*config_bssid) (struct rt2x00_dev *rt2x00dev, __le32 *bssid);
+ void (*config_type) (struct rt2x00_dev *rt2x00dev, const int type,
+ const int tsf_sync);
+ void (*config_preamble) (struct rt2x00_dev *rt2x00dev,
+ const int short_preamble,
+ const int ack_timeout,
+ const int ack_consume_time);
+ void (*config) (struct rt2x00_dev *rt2x00dev, const unsigned int flags,
+ struct rt2x00lib_conf *libconf);
+#define CONFIG_UPDATE_PHYMODE ( 1 << 1 )
+#define CONFIG_UPDATE_CHANNEL ( 1 << 2 )
+#define CONFIG_UPDATE_TXPOWER ( 1 << 3 )
+#define CONFIG_UPDATE_ANTENNA ( 1 << 4 )
+#define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 )
+#define CONFIG_UPDATE_BEACON_INT ( 1 << 6 )
+#define CONFIG_UPDATE_ALL 0xffff
};
/*
const char *name;
const unsigned int rxd_size;
const unsigned int txd_size;
+ const unsigned int eeprom_size;
+ const unsigned int rf_size;
const struct rt2x00lib_ops *lib;
const struct ieee80211_ops *hw;
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
+/*
+ * rt2x00 device flags
+ */
+enum rt2x00_flags {
+ /*
+ * Device state flags
+ */
+ DEVICE_PRESENT,
+ DEVICE_REGISTERED_HW,
+ DEVICE_INITIALIZED,
+ DEVICE_STARTED,
+ DEVICE_STARTED_SUSPEND,
+ DEVICE_ENABLED_RADIO,
+ DEVICE_DISABLED_RADIO_HW,
+
+ /*
+ * Driver features
+ */
+ DRIVER_REQUIRE_FIRMWARE,
+ DRIVER_REQUIRE_BEACON_RING,
+
+ /*
+ * Driver configuration
+ */
+ CONFIG_SUPPORT_HW_BUTTON,
+ CONFIG_FRAME_TYPE,
+ CONFIG_RF_SEQUENCE,
+ CONFIG_EXTERNAL_LNA_A,
+ CONFIG_EXTERNAL_LNA_BG,
+ CONFIG_DOUBLE_ANTENNA,
+ CONFIG_DISABLE_LINK_TUNING,
+ CONFIG_SHORT_PREAMBLE,
+};
+
/*
* rt2x00 device structure.
*/
*/
#ifdef CONFIG_RT2X00_LIB_RFKILL
struct rfkill *rfkill;
- struct delayed_work rfkill_work;
+ struct input_polled_dev *poll_dev;
#endif /* CONFIG_RT2X00_LIB_RFKILL */
+ /*
+ * If enabled, the debugfs interface structures
+ * required for deregistration of debugfs.
+ */
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ const struct rt2x00debug_intf *debugfs_intf;
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
/*
* Device flags.
* In these flags the current status and some
* of the device capabilities are stored.
*/
unsigned long flags;
-#define DEVICE_ENABLED_RADIO 1
-#define DEVICE_ENABLED_RADIO_HW 2
-#define DEVICE_INITIALIZED 3
-#define DEVICE_INITIALIZED_HW 4
-#define FIRMWARE_REQUIRED 5
-#define FIRMWARE_LOADED 6
-#define FIRMWARE_FAILED 7
-#define INTERFACE_ENABLED 8
-#define INTERFACE_ENABLED_MONITOR 9
-#define INTERFACE_ENABLED_PROMISC 10
-#define DEVICE_SUPPORT_ATIM 11
-#define DEVICE_SUPPORT_HW_BUTTON 12
-#define CONFIG_FRAME_TYPE 13
-#define CONFIG_RF_SEQUENCE 14
-#define CONFIG_EXTERNAL_LNA 15
-#define CONFIG_EXTERNAL_LNA_A 16
-#define CONFIG_EXTERNAL_LNA_BG 17
-#define CONFIG_DOUBLE_ANTENNA 18
-#define CONFIG_DISABLE_LINK_TUNING 19
/*
* Chipset identification.
struct hw_mode_spec spec;
/*
- * Base address of device registers (PCI devices only).
+ * Register pointers
+ * csr_addr: Base register address. (PCI)
+ * csr_cache: CSR cache for usb_control_msg. (USB)
*/
void __iomem *csr_addr;
-
- /*
- * If enabled, the debugfs interface structures
- * required for deregistration of debugfs.
- */
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- const struct rt2x00debug_intf *debugfs_intf;
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+ void *csr_cache;
/*
* Interface configuration.
/*
* Active RF register values.
- * These are stored here for easier working
- * with the rf registers.
+ * These are stored here so we don't need
+ * to read the rf registers and can directly
+ * use this value instead.
+ * This field should be accessed by using
+ * rt2x00_rf_read() and rt2x00_rf_write().
*/
- u32 rf1;
- u32 rf2;
- u32 rf3;
- u32 rf4;
+ u32 *rf;
+
+ /*
+ * USB Max frame size (for rt2500usb & rt73usb).
+ */
+ u16 usb_maxpacket;
/*
* Current TX power value.
*/
struct ieee80211_rx_status rx_status;
+ /*
+ * Scheduled work.
+ */
+ struct work_struct beacon_work;
+ struct work_struct filter_work;
+ struct work_struct config_work;
+
/*
* Data ring arrays for RX, TX and Beacon.
* The Beacon array also contains the Atim ring
* if that is supported by the device.
*/
+ int data_rings;
struct data_ring *rx;
struct data_ring *tx;
struct data_ring *bcn;
-};
-
-static inline struct data_ring* rt2x00_get_ring(
- struct rt2x00_dev *rt2x00dev, const unsigned int queue)
-{
- int atim = test_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags);
/*
- * Check if the rings have been allocated.
+ * Firmware image.
*/
- if (!rt2x00dev->tx || !rt2x00dev->bcn)
- return NULL;
-
- /*
- * Check if we are requesting a reqular TX ring,
- * or if we are requesting a Beacon or Atim ring.
- * For Atim rings, we should check if it is supported.
- */
- if (queue < rt2x00dev->hw->queues)
- return &rt2x00dev->tx[queue];
- else if (queue == IEEE80211_TX_QUEUE_BEACON)
- return &rt2x00dev->bcn[0];
- else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON && atim)
- return &rt2x00dev->bcn[1];
-
- return NULL;
-}
+ const struct firmware *fw;
+};
/*
* For-each loop for the ring array.
- * Since the all rings are allocated as a single array,
- * we can start at the rx pointer and move forward to the tx rings.
- * The 1 + Atim check will assure that the address directly after
- * the ring array is obtained and the for-each loop exits correctly.
+ * All rings have been allocated as a single array,
+ * this means we can create a very simply loop macro
+ * that is capable of looping through all rings.
+ * ring_end(), txring_end() and ring_loop() are helper macro's which
+ * should not be used directly. Instead the following should be used:
+ * ring_for_each() - Loops through all rings (RX, TX, Beacon & Atim)
+ * txring_for_each() - Loops through TX data rings (TX only)
+ * txringall_for_each() - Loops through all TX rings (TX, Beacon & Atim)
*/
#define ring_end(__dev) \
- &(__dev)->bcn[1 + test_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags)]
+ &(__dev)->rx[(__dev)->data_rings]
+
+#define txring_end(__dev) \
+ &(__dev)->tx[(__dev)->hw->queues]
#define ring_loop(__entry, __start, __end) \
for ((__entry) = (__start); \
ring_loop(__entry, (__dev)->rx, ring_end(__dev))
#define txring_for_each(__dev, __entry) \
- ring_loop(__entry, (__dev)->tx, (__dev)->bcn)
+ ring_loop(__entry, (__dev)->tx, txring_end(__dev))
#define txringall_for_each(__dev, __entry) \
ring_loop(__entry, (__dev)->tx, ring_end(__dev))
/*
- * EEPROM access.
- * The EEPROM is being accessed by word index.
+ * Generic RF access.
+ * The RF is being accessed by word index.
*/
-static inline void* rt2x00_eeprom_addr(const struct rt2x00_dev *rt2x00dev,
- const u8 word)
+static inline void rt2x00_rf_read(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u32 *data)
{
- return (void*)&rt2x00dev->eeprom[word];
+ *data = rt2x00dev->rf[word];
}
-static inline void rt2x00_eeprom_read(const struct rt2x00_dev *rt2x00dev,
- const u8 word, u16 *data)
+static inline void rt2x00_rf_write(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u32 data)
{
- *data = le16_to_cpu(rt2x00dev->eeprom[word]);
-}
-
-static inline void rt2x00_eeprom_write(const struct rt2x00_dev *rt2x00dev,
- const u8 word, u16 data)
-{
- rt2x00dev->eeprom[word] = cpu_to_le16(data);
+ rt2x00dev->rf[word] = data;
}
/*
- * Link tuning handlers
+ * Generic EEPROM access.
+ * The EEPROM is being accessed by word index.
*/
-static inline void rt2x00_start_link_tune(struct rt2x00_dev *rt2x00dev)
+static inline void *rt2x00_eeprom_addr(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word)
{
- rt2x00dev->link.count = 0;
- rt2x00dev->link.avg_rssi = 0;
- rt2x00dev->link.false_cca = 0;
-
- queue_delayed_work(rt2x00dev->hw->workqueue,
- &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
+ return (void *)&rt2x00dev->eeprom[word];
}
-static inline void rt2x00_stop_link_tune(struct rt2x00_dev *rt2x00dev)
-{
- if (work_pending(&rt2x00dev->link.work.work))
- cancel_rearming_delayed_workqueue(
- rt2x00dev->hw->workqueue, &rt2x00dev->link.work);
-}
-
-static inline void rt2x00_update_link_rssi(struct link *link, int rssi)
+static inline void rt2x00_eeprom_read(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u16 *data)
{
- if (!link->avg_rssi)
- link->avg_rssi = rssi;
- else
- link->avg_rssi = ((link->avg_rssi * 7) + rssi) / 8;
+ *data = le16_to_cpu(rt2x00dev->eeprom[word]);
}
-static inline int rt2x00_get_link_rssi(struct link *link)
+static inline void rt2x00_eeprom_write(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u16 data)
{
- return link->avg_rssi;
+ rt2x00dev->eeprom[word] = cpu_to_le16(data);
}
/*
* Chipset handlers
*/
static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
- const u16 rt, const u16 rf, const u32 rev)
+ const u16 rt, const u16 rf, const u32 rev)
{
INFO(rt2x00dev,
- "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
- rt, rf, rev);
+ "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
+ rt, rf, rev);
rt2x00dev->chip.rt = rt;
rt2x00dev->chip.rf = rf;
return chipset->rev;
}
-/*
- * Device specific rate value.
- * We will have to create the device specific rate value
- * passed to the ieee80211 kernel. We need to make it a consist of
- * multiple fields because we want to store more then 1 device specific
- * values inside the value.
- * 1 - rate, stored as 100 kbit/s.
- * 2 - preamble, short_preamble enabled flag.
- * 3 - MASK_RATE, which rates are enabled in this mode, this mask
- * corresponds with the TX register format for the current device.
- * 4 - plcp, 802.11b rates are device specific,
- * 802.11g rates are set according to the ieee802.11a-1999 p.14.
- * The bit to enable preamble is set in a seperate define.
- */
-#define DEV_RATE FIELD32(0x000007ff)
-#define DEV_PREAMBLE FIELD32(0x00000800)
-#define DEV_RATEMASK FIELD32(0x00fff000)
-#define DEV_PLCP FIELD32(0xff000000)
-
-/*
- * Bitmask for MASK_RATE
- */
-#define DEV_RATE_1MB 0x00000001
-#define DEV_RATE_2MB 0x00000002
-#define DEV_RATE_5_5MB 0x00000004
-#define DEV_RATE_11MB 0x00000008
-#define DEV_RATE_6MB 0x00000010
-#define DEV_RATE_9MB 0x00000020
-#define DEV_RATE_12MB 0x00000040
-#define DEV_RATE_18MB 0x00000080
-#define DEV_RATE_24MB 0x00000100
-#define DEV_RATE_36MB 0x00000200
-#define DEV_RATE_48MB 0x00000400
-#define DEV_RATE_54MB 0x00000800
-
-/*
- * Bitmask groups of bitrates
- */
-#define DEV_BASIC_RATE \
- ( DEV_RATE_1MB | DEV_RATE_2MB | DEV_RATE_5_5MB | DEV_RATE_11MB | \
- DEV_RATE_6MB | DEV_RATE_12MB | DEV_RATE_24MB )
-
-#define DEV_CCK_RATE \
- ( DEV_RATE_1MB | DEV_RATE_2MB | DEV_RATE_5_5MB | DEV_RATE_11MB )
-
-#define DEV_OFDM_RATE \
- ( DEV_RATE_6MB | DEV_RATE_9MB | DEV_RATE_12MB | DEV_RATE_18MB | \
- DEV_RATE_24MB | DEV_RATE_36MB | DEV_RATE_48MB | DEV_RATE_54MB )
-
-/*
- * Macro's to set and get specific fields from the device specific val and val2
- * fields inside the ieee80211_rate entry.
- */
-#define DEVICE_SET_RATE_FIELD(__value, __mask) \
- (int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask )
-
-#define DEVICE_GET_RATE_FIELD(__value, __mask) \
- (int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset )
+static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
+ const u32 rev)
+{
+ return (((chipset->rev & 0xffff0) == rev) &&
+ !!(chipset->rev & 0x0000f));
+}
/*
* Duration calculations
return ((size * 8 * 10) % rate);
}
+/*
+ * Library functions.
+ */
+struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev,
+ const unsigned int queue);
+
+/*
+ * Interrupt context handlers.
+ */
+void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
+void rt2x00lib_txdone(struct data_entry *entry,
+ const int status, const int retry);
+void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
+ struct rxdata_entry_desc *desc);
+
+/*
+ * TX descriptor initializer
+ */
+void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+ struct data_desc *txd,
+ struct ieee80211_hdr *ieee80211hdr,
+ unsigned int length,
+ struct ieee80211_tx_control *control);
+
+/*
+ * mac80211 handlers.
+ */
+int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_tx_control *control);
+int rt2x00mac_start(struct ieee80211_hw *hw);
+void rt2x00mac_stop(struct ieee80211_hw *hw);
+int rt2x00mac_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
+int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
+ struct ieee80211_if_conf *conf);
+int rt2x00mac_get_stats(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats);
+int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
+ struct ieee80211_tx_queue_stats *stats);
+void rt2x00mac_erp_ie_changed(struct ieee80211_hw *hw, u8 changes,
+ int cts_protection, int preamble);
+int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
+ const struct ieee80211_tx_queue_params *params);
+
+/*
+ * Driver allocation handlers.
+ */
+int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev);
+void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev);
+#ifdef CONFIG_PM
+int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state);
+int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
+#endif /* CONFIG_PM */
+
#endif /* RT2X00_H */
projects / openwrt.git / blobdiff