-diff -Nur linux-2.4.30/arch/mips/bcm947xx/compressed/Makefile linux-2.4.30-brcm/arch/mips/bcm947xx/compressed/Makefile
---- linux-2.4.30/arch/mips/bcm947xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/compressed/Makefile 2005-05-26 03:29:22.000000000 +0200
+diff -urN linux.old/Makefile linux.dev/Makefile
+--- linux.old/Makefile 2005-08-26 13:41:41.689634168 +0200
++++ linux.dev/Makefile 2005-08-26 13:44:34.233403528 +0200
+@@ -17,9 +17,9 @@
+ FINDHPATH = $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net $(HPATH)/math-emu
+
+ HOSTCC = gcc
+-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
++HOSTCFLAGS = -Wall -Wstrict-prototypes -Os -fomit-frame-pointer
+
+-CROSS_COMPILE =
++CROSS_COMPILE=
+
+ #
+ # Include the make variables (CC, etc...)
+@@ -91,8 +91,10 @@
+
+ CPPFLAGS := -D__KERNEL__ -I$(HPATH)
+
+-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
++CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+ -fno-strict-aliasing -fno-common
++
++
+ ifndef CONFIG_FRAME_POINTER
+ CFLAGS += -fomit-frame-pointer
+ endif
+@@ -354,7 +356,7 @@
+ @rm -f .ver1
+
+ include/linux/version.h: ./Makefile
+- @expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
++ @-expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
+ (echo KERNELRELEASE \"$(KERNELRELEASE)\" exceeds $(uts_len) characters >&2; false)
+ @echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" > .ver
+ @echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)` >> .ver
+diff -urN linux.old/Rules.make linux.dev/Rules.make
+--- linux.old/Rules.make 2005-11-07 23:12:50.538884250 +0100
++++ linux.dev/Rules.make 2005-11-07 21:57:07.837585250 +0100
+@@ -176,7 +176,14 @@
+ _modinst__: dummy
+ ifneq "$(strip $(ALL_MOBJS))" ""
+ mkdir -p $(MODLIB)/kernel/$(MOD_DESTDIR)
+- cp $(sort $(ALL_MOBJS)) $(MODLIB)/kernel/$(MOD_DESTDIR)
++ #@cp $(sort $(ALL_MOBJS)) $(MODLIB)/kernel/$(MOD_DESTDIR)
++ for f in $(ALL_MOBJS) ; do \
++ $(OBJCOPY) -R __ksymtab -R .comment -R .note -x \
++ `$(NM) $$f | cut -f3- -d' ' | sed -n \
++ -e 's/__module_parm_\(.*\)/-K \1/p' \
++ -e 's/__ks..tab_\(.*\)/-K \1/p'` \
++ $$f $(MODLIB)/kernel/$(MOD_DESTDIR)$(MOD_TARGET)$$f; \
++ done
+ endif
+
+ .PHONY: modules_install
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2005-11-07 23:12:50.582887000 +0100
++++ linux.dev/arch/mips/Makefile 2005-11-07 21:57:08.537629000 +0100
+@@ -46,10 +46,10 @@
+ GCCFLAGS := -I $(TOPDIR)/include/asm/gcc
+ GCCFLAGS += -G 0 -mno-abicalls -fno-pic -pipe
+ GCCFLAGS += $(call check_gcc, -finline-limit=100000,)
+-LINKFLAGS += -G 0 -static -n
+-MODFLAGS += -mlong-calls
++LINKFLAGS += -G 0 -static -n -nostdlib
++MODFLAGS += -mlong-calls -fno-common
+
+-ifdef CONFIG_DEBUG_INFO
++ifdef CONFIG_REMOTE_DEBUG
+ GCCFLAGS += -g
+ ifdef CONFIG_SB1XXX_CORELIS
+ GCCFLAGS += -mno-sched-prolog -fno-omit-frame-pointer
+@@ -71,13 +71,13 @@
+ set_gccflags = $(shell \
+ while :; do \
+ cpu=$(1); isa=-$(2); \
+- for gcc_opt in -march= -mcpu=; do \
++ for gcc_opt in -march= -mtune=; do \
+ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
+ -xc /dev/null > /dev/null 2>&1 && \
+ break 2; \
+ done; \
+ cpu=$(3); isa=-$(4); \
+- for gcc_opt in -march= -mcpu=; do \
++ for gcc_opt in -march= -mtune=; do \
+ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
+ -xc /dev/null > /dev/null 2>&1 && \
+ break 2; \
+@@ -92,7 +92,7 @@
+ fi; \
+ gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
+ while :; do \
+- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
++ for gas_opt in -Wa,-march= -Wa,-mtune=; do \
+ $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
+ -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
+ break 2; \
+@@ -174,6 +174,7 @@
+ endif
+
+ AFLAGS += $(GCCFLAGS)
++ASFLAGS += $(GCCFLAGS)
+ CFLAGS += $(GCCFLAGS)
+
+ LD += -m $(ld-emul)
+@@ -727,6 +728,19 @@
+ endif
+
+ #
++# Broadcom BCM947XX variants
++#
++ifdef CONFIG_BCM947XX
++LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o
++SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx
++LOADADDR := 0x80001000
++
++zImage: vmlinux
++ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
++export LOADADDR
++endif
++
++#
+ # Choosing incompatible machines durings configuration will result in
+ # error messages during linking. Select a default linkscript if
+ # none has been choosen above.
+@@ -779,6 +793,7 @@
+ $(MAKE) -C arch/$(ARCH)/tools clean
+ $(MAKE) -C arch/mips/baget clean
+ $(MAKE) -C arch/mips/lasat clean
++ $(MAKE) -C arch/mips/bcm947xx/compressed clean
+
+ archmrproper:
+ @$(MAKEBOOT) mrproper
+diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
+--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/Makefile 2005-11-08 00:55:04.392074500 +0100
+@@ -0,0 +1,15 @@
++#
++# Makefile for the BCM947xx specific kernel interface routines
++# under Linux.
++#
++
++EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
++
++O_TARGET := bcm947xx.o
++
++export-objs := nvram_linux.o setup.o
++obj-y := prom.o setup.o time.o sbmips.o gpio.o
++obj-y += nvram.o nvram_linux.o sflash.o
++obj-$(CONFIG_PCI) += sbpci.o pcibios.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/bcm947xx/compressed/Makefile
+--- linux.old/arch/mips/bcm947xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/compressed/Makefile 2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,33 @@
+#
+# Makefile for Broadcom BCM947XX boards
+
+clean:
+ rm -f vmlinuz piggy
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/generic/int-handler.S linux-2.4.30-brcm/arch/mips/bcm947xx/generic/int-handler.S
---- linux-2.4.30/arch/mips/bcm947xx/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/generic/int-handler.S 2005-05-22 22:55:51.000000000 +0200
+diff -urN linux.old/arch/mips/bcm947xx/generic/Makefile linux.dev/arch/mips/bcm947xx/generic/Makefile
+--- linux.old/arch/mips/bcm947xx/generic/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/generic/Makefile 2005-11-07 21:57:07.841585500 +0100
+@@ -0,0 +1,15 @@
++#
++# Makefile for the BCM947xx specific kernel interface routines
++# under Linux.
++#
++
++.S.s:
++ $(CPP) $(AFLAGS) $< -o $*.s
++.S.o:
++ $(CC) $(AFLAGS) -c $< -o $*.o
++
++O_TARGET := brcm.o
++
++obj-y := int-handler.o irq.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/arch/mips/bcm947xx/generic/int-handler.S linux.dev/arch/mips/bcm947xx/generic/int-handler.S
+--- linux.old/arch/mips/bcm947xx/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/generic/int-handler.S 2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,51 @@
+/*
+ * Generic interrupt handler for Broadcom MIPS boards
+ nop
+
+ END(brcmIRQ)
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/generic/irq.c linux-2.4.30-brcm/arch/mips/bcm947xx/generic/irq.c
---- linux-2.4.30/arch/mips/bcm947xx/generic/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/generic/irq.c 2005-05-22 22:55:51.000000000 +0200
+diff -urN linux.old/arch/mips/bcm947xx/generic/irq.c linux.dev/arch/mips/bcm947xx/generic/irq.c
+--- linux.old/arch/mips/bcm947xx/generic/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/generic/irq.c 2005-11-07 21:57:07.841585500 +0100
@@ -0,0 +1,130 @@
+/*
+ * Generic interrupt control functions for Broadcom MIPS boards
+ breakpoint();
+#endif
+}
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/generic/Makefile linux-2.4.30-brcm/arch/mips/bcm947xx/generic/Makefile
---- linux-2.4.30/arch/mips/bcm947xx/generic/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/generic/Makefile 2005-05-25 18:53:41.000000000 +0200
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the BCM947xx specific kernel interface routines
-+# under Linux.
-+#
-+
-+.S.s:
-+ $(CPP) $(AFLAGS) $< -o $*.s
-+.S.o:
-+ $(CC) $(AFLAGS) -c $< -o $*.o
-+
-+O_TARGET := brcm.o
-+
-+obj-y := int-handler.o irq.o
-+
-+include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/gpio.c linux-2.4.30-brcm/arch/mips/bcm947xx/gpio.c
---- linux-2.4.30/arch/mips/bcm947xx/gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/gpio.c 2005-05-22 22:55:51.000000000 +0200
+diff -urN linux.old/arch/mips/bcm947xx/gpio.c linux.dev/arch/mips/bcm947xx/gpio.c
+--- linux.old/arch/mips/bcm947xx/gpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/gpio.c 2005-11-07 23:58:34.968754500 +0100
@@ -0,0 +1,158 @@
+/*
+ * GPIO char driver
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * $Id: gpio.c,v 1.1 2005/03/16 13:49:59 wbx Exp $
++ * $Id$
+ */
+
+#include <linux/module.h>
+#include <sbutils.h>
+#include <bcmdevs.h>
+
-+static void *gpio_sbh;
++static sb_t *gpio_sbh;
+static int gpio_major;
+static devfs_handle_t gpio_dir;
+static struct {
+ val = sb_gpioin(gpio_sbh);
+ break;
+ case 1:
-+ val = sb_gpioout(gpio_sbh, 0, 0);
++ val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
+ break;
+ case 2:
-+ val = sb_gpioouten(gpio_sbh, 0, 0);
++ val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
+ break;
+ case 3:
-+ val = sb_gpiocontrol(gpio_sbh, 0, 0);
++ val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
+ break;
+ default:
+ return -ENODEV;
+ case 0:
+ return -EACCES;
+ case 1:
-+ sb_gpioout(gpio_sbh, ~0, val);
++ sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
+ break;
+ case 2:
-+ sb_gpioouten(gpio_sbh, ~0, val);
++ sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
+ break;
+ case 3:
-+ sb_gpiocontrol(gpio_sbh, ~0, val);
++ sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
+ break;
+ default:
+ return -ENODEV;
+
+module_init(gpio_init);
+module_exit(gpio_exit);
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmdevs.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmdevs.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmdevs.h 2005-05-25 20:30:26.000000000 +0200
-@@ -0,0 +1,369 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h
+--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2005-11-07 22:51:38.772725750 +0100
+@@ -0,0 +1,391 @@
+/*
+ * Broadcom device-specific manifest constants.
+ *
+#define BCM4310_USB_ID 0x4315 /* 4310 usb */
+
+#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */
++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */
++
+
+#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */
+#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
+#define BFL_EXTLNA 0x1000 /* This board has an external LNA */
+#define BFL_HGPA 0x2000 /* This board has a high gain PA */
+#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */
++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */
+
+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
+#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */
+#endif
+
+/* power control defines */
-+#define PLL_DELAY 150 /* 150us pll on delay */
-+#define FREF_DELAY 200 /* 200us fref change delay */
-+#define MIN_SLOW_CLK 32 /* 32us Slow clock period */
++#define PLL_DELAY 150 /* us pll on delay */
++#define FREF_DELAY 200 /* us fref change delay */
++#define MIN_SLOW_CLK 32 /* us Slow clock period */
++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
+
+/* Reference Board Types */
+
+#define MP4318_BOARD 0x044a
+#define SD4318_BOARD 0x044b
+
++/* BCM63XX boards */
++#define BCM96338_BOARD 0x6338
++#define BCM96345_BOARD 0x6345
++#define BCM96348_BOARD 0x6348
++
+/* Another mp4306 with SiGe */
+#define BCM94306P_BOARD 0x044c
+
+/* 4306mplna */
+#define BCM94306MPLNA_BOARD 0x0457
+
++/* 4320 boards */
++#define BU4320_BOARD 0x0458
++#define BU4320S_BOARD 0x0459
++#define BCM94320PH_BOARD 0x045a
+
+/* 4306mph */
+#define BCM94306MPH_BOARD 0x045b
+
+#define BU4712SD_BOARD 0x045d
+
++#define BCM94320PFLSH_BOARD 0x045e
+
+#define BU4712L_BOARD 0x045f
+#define BCM94712LGR_BOARD 0x0460
++#define BCM94320R_BOARD 0x0461
+
+#define BU5352_BOARD 0x0462
++
++#define BCM94318MPGH_BOARD 0x0463
++
++
+#define BCM95352GR_BOARD 0x0467
+
++/* bcm95351agr */
++#define BCM95351AGR_BOARD 0x0470
++
+/* # of GPIO pins */
+#define GPIO_NUMPINS 16
+
+#endif /* _BCMDEVS_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmendian.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmendian.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmendian.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,168 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h
+--- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2005-11-07 22:51:38.772725750 +0100
+@@ -0,0 +1,152 @@
+/*
+ * local version of endian.h - byte order defines
+ *
+ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \
+ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \
+ (((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
++
++/* 2 Byte swap a 32 bit value */
++#define BCMSWAP32BY16(val) \
++ ((uint32)( \
++ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
++ (((uint32)(val) & (uint32)0xffff0000UL) >> 16) ))
++
+
+static INLINE uint16
+bcmswap16(uint16 val)
+ return BCMSWAP32(val);
+}
+
++static INLINE uint32
++bcmswap32by16(uint32 val)
++{
++ return BCMSWAP32BY16(val);
++}
++
+/* buf - start of buffer of shorts to swap */
+/* len - byte length of buffer */
+static INLINE void
+ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
+}
+
-+/* get_ua adapted from Linux asm-mips/unaligned.h */
-+#ifdef IL_BIGENDIAN
-+#define get_ua(ptr) \
-+({ \
-+ __typeof__(*(ptr)) __val; \
-+ \
-+ switch (sizeof(*(ptr))) { \
-+ case 1: \
-+ __val = *(uint8 *)ptr; \
-+ break; \
-+ case 2: \
-+ __val = ntoh16_ua((uint8 *)ptr); \
-+ break; \
-+ case 4: \
-+ __val = ntoh32_ua((uint8 *)ptr); \
-+ break; \
-+ } \
-+ \
-+ __val; \
-+})
-+#else
-+#define get_ua(ptr) \
-+({ \
-+ __typeof__(*(ptr)) __val; \
-+ \
-+ switch (sizeof(*(ptr))) { \
-+ case 1: \
-+ __val = *(uint8 *)ptr; \
-+ break; \
-+ case 2: \
-+ __val = ltoh16_ua((uint8 *)ptr); \
-+ break; \
-+ case 4: \
-+ __val = ltoh32_ua((uint8 *)ptr); \
-+ break; \
-+ } \
-+ \
-+ __val; \
-+})
-+#endif
++#define ltoh_ua(ptr) ( \
++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
++ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
++)
++
++#define ntoh_ua(ptr) ( \
++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
++ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
++)
+
+#endif /* _BCMENDIAN_H_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmenet47xx.h linux.dev/arch/mips/bcm947xx/include/bcmenet47xx.h
+--- linux.old/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-11-07 22:51:38.772725750 +0100
@@ -0,0 +1,229 @@
+/*
+ * Hardware-specific definitions for
+ uint32 PAD[63];
+
+ /* DMA engine */
-+ dmaregs_t dmaregs;
-+ dmafifo_t dmafifo;
++ dma32regp_t dmaregs;
++ dma32diag_t dmafifo;
+ uint32 PAD[116];
+
+ /* EMAC Registers */
+#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */
+
+#endif /* _bcmenet_47xx_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenetmib.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmenetmib.h linux.dev/arch/mips/bcm947xx/include/bcmenetmib.h
+--- linux.old/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmenetmib.h 2005-11-07 21:57:07.845585750 +0100
@@ -0,0 +1,81 @@
+/*
+ * Hardware-specific MIB definition for
+} bcmenetmib_t;
+
+#endif /* _bcmenetmib_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmenetphy.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenetphy.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmenetphy.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenetphy.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmenetphy.h linux.dev/arch/mips/bcm947xx/include/bcmenetphy.h
+--- linux.old/arch/mips/bcm947xx/include/bcmenetphy.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmenetphy.h 2005-11-07 21:57:07.845585750 +0100
@@ -0,0 +1,58 @@
+/*
+ * Misc Broadcom BCM47XX MDC/MDIO enet phy definitions.
+#define AUX_DUPLEX (1 << 0) /* duplex 0=half 1=full */
+
+#endif /* _bcmenetphy_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmenetrxh.h linux.dev/arch/mips/bcm947xx/include/bcmenetrxh.h
+--- linux.old/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-11-07 21:57:07.845585750 +0100
@@ -0,0 +1,43 @@
+/*
+ * Hardware-specific Receive Data Header for the
+#define RXF_OV ((uint16)1 << 0) /* fifo overflow */
+
+#endif /* _bcmenetrxh_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmnvram.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmnvram.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,132 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h
+--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2005-11-07 22:51:38.772725750 +0100
+@@ -0,0 +1,141 @@
+/*
+ * NVRAM variable manipulation
+ *
+struct nvram_header {
+ uint32 magic;
+ uint32 len;
-+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
-+ uint32 config_refresh; /* 0:15 config, 16:31 refresh */
++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
++ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
+ uint32 config_ncdl; /* ncdl values for memc */
+};
+
+ * Disable NVRAM access. May be unnecessary or undefined on certain
+ * platforms.
+ */
-+extern void BCMINIT(nvram_exit)(void);
++extern void BCMINIT(nvram_exit)(void *sbh);
+
+/*
+ * Get the value of an NVRAM variable. The pointer returned may be
+extern char * BCMINIT(nvram_get)(const char *name);
+
+/*
++ * Read the reset GPIO value from the nvram and set the GPIO
++ * as input
++ */
++extern int BCMINITFN(nvram_resetgpio_init)(void *sbh);
++
++/*
+ * Get the value of an NVRAM variable.
+ * @param name name of variable to get
+ * @return value of variable or NUL if undefined
+#define NVRAM_HEADER_SIZE 20
+#define NVRAM_SPACE 0x8000
+
++#define NVRAM_MAX_VALUE_LEN 255
++#define NVRAM_MAX_PARAM_LEN 64
++
+#endif /* _bcmnvram_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmparams.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmparams.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmparams.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmparams.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,23 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmparams.h linux.dev/arch/mips/bcm947xx/include/bcmparams.h
+--- linux.old/arch/mips/bcm947xx/include/bcmparams.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmparams.h 2005-11-07 22:51:38.776726000 +0100
+@@ -0,0 +1,25 @@
+/*
+ * Misc system wide parameters.
+ *
+
+#define DEV_NUMIFS 16 /* Max. # of devices/interfaces supported */
+
++#define WL_MAXBSSCFG 16 /* maximum number of BSS Configs we can configure */
++
+#endif
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmsrom.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmsrom.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,22 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h
+--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2005-11-07 22:51:38.776726000 +0100
+@@ -0,0 +1,23 @@
+/*
+ * Misc useful routines to access NIC local SROM/OTP .
+ *
+#ifndef _bcmsrom_h_
+#define _bcmsrom_h_
+
-+extern int srom_var_init(void *sbh, uint bus, void *curmap, void *osh, char **vars, int *count);
-+extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
-+
++extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count);
++
++extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
++extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf);
++
+#endif /* _bcmsrom_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bcmutils.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmutils.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bcmutils.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,239 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h
+--- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2005-11-07 22:51:38.776726000 +0100
+@@ -0,0 +1,313 @@
+/*
+ * Misc useful os-independent macros and functions.
+ *
+#define _BCM_X 0x40 /* hex digit */
+#define _BCM_SP 0x80 /* hard space (0x20) */
+
++#define GPIO_PIN_NOTDEFINED 0x20
++
+extern unsigned char bcm_ctype[];
+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
+
+
+/* externs */
+/* packet */
-+extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
-+extern uint pkttotlen(void *drv, void *);
++extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
++extern uint pkttotlen(osl_t *osh, void *);
+extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]);
+extern void pktenq(struct pktq *q, void *p, bool lifo);
+extern void *pktdeq(struct pktq *q);
+#define bcmlog(fmt, a1, a2)
+#define bcmdumplog(buf, size) *buf = '\0'
+#define bcmdumplogent(buf, idx) -1
++
+#endif /* #ifdef BCMDRIVER */
+
+/*** driver/apps-shared section ***/
++
++#define BCME_STRLEN 64
++#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST))
++
++
++/*
++ * error codes could be added but the defined ones shouldn't be changed/deleted
++ * these error codes are exposed to the user code
++ * when ever a new error code is added to this list
++ * please update errorstring table with the related error string and
++ * update osl files with os specific errorcode map
++*/
++
++#define BCME_ERROR -1 /* Error generic */
++#define BCME_BADARG -2 /* Bad Argument */
++#define BCME_BADOPTION -3 /* Bad option */
++#define BCME_NOTUP -4 /* Not up */
++#define BCME_NOTDOWN -5 /* Not down */
++#define BCME_NOTAP -6 /* Not AP */
++#define BCME_NOTSTA -7 /* Not STA */
++#define BCME_BADKEYIDX -8 /* BAD Key Index */
++#define BCME_RADIOOFF -9 /* Radio Off */
++#define BCME_NOTBANDLOCKED -10 /* Not bandlocked */
++#define BCME_NOCLK -11 /* No Clock*/
++#define BCME_BADRATESET -12 /* BAD RateSet*/
++#define BCME_BADBAND -13 /* BAD Band */
++#define BCME_BUFTOOSHORT -14 /* Buffer too short */
++#define BCME_BUFTOOLONG -15 /* Buffer too Long */
++#define BCME_BUSY -16 /* Busy*/
++#define BCME_NOTASSOCIATED -17 /* Not associated*/
++#define BCME_BADSSIDLEN -18 /* BAD SSID Len */
++#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel*/
++#define BCME_BADCHAN -20 /* BAD Channel */
++#define BCME_BADADDR -21 /* BAD Address*/
++#define BCME_NORESOURCE -22 /* No resources*/
++#define BCME_UNSUPPORTED -23 /* Unsupported*/
++#define BCME_BADLEN -24 /* Bad Length*/
++#define BCME_NOTREADY -25 /* Not ready Yet*/
++#define BCME_EPERM -26 /* Not Permitted */
++#define BCME_NOMEM -27 /* No Memory */
++#define BCME_ASSOCIATED -28 /* Associated */
++#define BCME_RANGE -29 /* Range Error*/
++#define BCME_NOTFOUND -30 /* Not found */
++#define BCME_LAST BCME_NOTFOUND
++
++#ifndef ABS
++#define ABS(a) (((a)<0)?-(a):(a))
++#endif
++
+#ifndef MIN
+#define MIN(a, b) (((a)<(b))?(a):(b))
+#endif
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0)
+#define ISPOWEROF2(x) ((((x)-1)&(x))==0)
++#define VALID_MASK(mask) !((mask) & ((mask) + 1))
+#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member)
+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
+
+#define isclr(a,i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif
+
-+#define NBITS(type) (sizeof (type) * 8)
++#define NBITS(type) (sizeof(type) * 8)
++#define NBITVAL(bits) (1 << (bits))
++#define MAXBITVAL(bits) ((1 << (bits)) - 1)
+
+/* crc defines */
+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
+} bcm_tlv_t;
+
+/* Check that bcm_tlv_t fits into the given buflen */
-+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len)
++#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
+
+/* buffer length for ethernet address from bcm_ether_ntoa() */
+#define ETHER_ADDR_STR_LEN 18
+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
+
++/* bcmerror*/
++extern const char *bcmerrorstr(int bcmerror);
++
+/* multi-bool data type: set of bools, mbool is true if any is set */
+typedef uint32 mbool;
+#define mboolset(mb, bit) (mb |= bit) /* set one bool */
+#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */
+#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val)))
+
++/* power conversion */
++extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
++extern uint8 bcm_mw_to_qdbm(uint16 mw);
++
++/* generic datastruct to help dump routines */
++struct fielddesc {
++ char *nameandfmt;
++ uint32 offset;
++ uint32 len;
++};
++
++typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
++extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize);
++
++extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
++
+#endif /* _bcmutils_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/bitfuncs.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/bitfuncs.h
---- linux-2.4.30/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bcm947xx/include/bitfuncs.h
+--- linux.old/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h 2005-11-07 21:57:07.849586000 +0100
@@ -0,0 +1,85 @@
+/*
+ * bit manipulation utility functions
+#endif
+
+#endif /* _BITFUNCS_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/cfe_osl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/cfe_osl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/cfe_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/cfe_osl.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,184 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/cfe_osl.h linux.dev/arch/mips/bcm947xx/include/cfe_osl.h
+--- linux.old/arch/mips/bcm947xx/include/cfe_osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/cfe_osl.h 2005-11-07 22:51:38.776726000 +0100
+@@ -0,0 +1,191 @@
+/*
+ * CFE boot loader OS Abstraction Layer.
+ *
+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
+ do {} while (0)
+
++/* PCI device bus # and slot # */
++#define OSL_PCI_BUS(osh) (0)
++#define OSL_PCI_SLOT(osh) (0)
++
+/* register access macros */
+#define wreg32(r, v) (*(volatile uint32*)(r) = (uint32)(v))
+#define rreg32(r) (*(volatile uint32*)(r))
+/* bcopy, bcmp, and bzero */
+#define bcmp(b1, b2, len) lib_memcmp((b1), (b2), (len))
+
-+#define osl_attach(pdev) (pdev)
++#define osl_attach(pdev) ((osl_t*)pdev)
+#define osl_detach(osh)
+
+/* general purpose memory allocation */
+/* microsecond delay */
+#define OSL_DELAY(usec) cfe_usleep((cfe_cpu_speed/CPUCFG_CYCLESPERCPUTICK/1000000*(usec)))
+
++#define OSL_ERROR(bcmerror) osl_error(bcmerror)
++
+/* map/unmap physical to virtual I/O */
+#define REG_MAP(pa, size) ((void*)UNCADDR((ulong)(pa)))
+#define REG_UNMAP(va) do {} while (0)
+#define PKTBUFSZ 2048
+
+/* packet primitives */
-+#define PKTGET(drv, len, send) ((void*)osl_pktget((len)))
-+#define PKTFREE(drv, lb, send) osl_pktfree((struct lbuf*)(lb))
-+#define PKTDATA(drv, lb) (((struct lbuf*)(lb))->data)
-+#define PKTLEN(drv, lb) (((struct lbuf*)(lb))->len)
-+#define PKTHEADROOM(drv, lb) (PKTDATA(drv,lb)-(((struct lbuf*)(lb))->head))
-+#define PKTTAILROOM(drv, lb) ((((struct lbuf*)(lb))->end)-(((struct lbuf*)(lb))->tail))
-+#define PKTNEXT(drv, lb) (((struct lbuf*)(lb))->next)
++#define PKTGET(osh, len, send) ((void*)osl_pktget((len)))
++#define PKTFREE(osh, lb, send) osl_pktfree((struct lbuf*)(lb))
++#define PKTDATA(osh, lb) (((struct lbuf*)(lb))->data)
++#define PKTLEN(osh, lb) (((struct lbuf*)(lb))->len)
++#define PKTHEADROOM(osh, lb) (PKTDATA(osh,lb)-(((struct lbuf*)(lb))->head))
++#define PKTTAILROOM(osh, lb) ((((struct lbuf*)(lb))->end)-(((struct lbuf*)(lb))->tail))
++#define PKTNEXT(osh, lb) (((struct lbuf*)(lb))->next)
+#define PKTSETNEXT(lb, x) (((struct lbuf*)(lb))->next = (struct lbuf*)(x))
-+#define PKTSETLEN(drv, lb, len) osl_pktsetlen((struct lbuf*)(lb), (len))
-+#define PKTPUSH(drv, lb, bytes) osl_pktpush((struct lbuf*)(lb), (bytes))
-+#define PKTPULL(drv, lb, bytes) osl_pktpull((struct lbuf*)(lb), (bytes))
-+#define PKTDUP(drv, lb) osl_pktdup((struct lbuf*)(lb))
++#define PKTSETLEN(osh, lb, len) osl_pktsetlen((struct lbuf*)(lb), (len))
++#define PKTPUSH(osh, lb, bytes) osl_pktpush((struct lbuf*)(lb), (bytes))
++#define PKTPULL(osh, lb, bytes) osl_pktpull((struct lbuf*)(lb), (bytes))
++#define PKTDUP(osh, lb) osl_pktdup((struct lbuf*)(lb))
+#define PKTCOOKIE(lb) (((struct lbuf*)(lb))->cookie)
+#define PKTSETCOOKIE(lb, x) (((struct lbuf*)(lb))->cookie = (void*)(x))
+#define PKTLINK(lb) (((struct lbuf*)(lb))->link)
+extern uchar *osl_pktpush(struct lbuf *lb, uint bytes);
+extern uchar *osl_pktpull(struct lbuf *lb, uint bytes);
+extern struct lbuf *osl_pktdup(struct lbuf *lb);
++extern int osl_error(int bcmerror);
+
+#endif /* _cfe_osl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/epivers.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/epivers.h
---- linux-2.4.30/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/epivers.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/epivers.h linux.dev/arch/mips/bcm947xx/include/epivers.h
+--- linux.old/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/epivers.h 2005-11-07 22:51:38.776726000 +0100
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+
+#define EPI_MAJOR_VERSION 3
+
-+#define EPI_MINOR_VERSION 90
++#define EPI_MINOR_VERSION 130
+
-+#define EPI_RC_NUMBER 23
++#define EPI_RC_NUMBER 20
+
+#define EPI_INCREMENTAL_NUMBER 0
+
+#define EPI_BUILD_NUMBER 0
+
-+#define EPI_VERSION 3,90,23,0
++#define EPI_VERSION 3,130,20,0
+
-+#define EPI_VERSION_NUM 0x035a1700
++#define EPI_VERSION_NUM 0x03821400
+
+/* Driver Version String, ASCII, 32 chars max */
-+#define EPI_VERSION_STR "3.90.23.0"
-+#define EPI_ROUTER_VERSION_STR "3.91.23.0"
++#define EPI_VERSION_STR "3.130.20.0"
++#define EPI_ROUTER_VERSION_STR "3.131.20.0"
+
+#endif /* _epivers_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/epivers.h.in linux-2.4.30-brcm/arch/mips/bcm947xx/include/epivers.h.in
---- linux-2.4.30/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/epivers.h.in linux.dev/arch/mips/bcm947xx/include/epivers.h.in
+--- linux.old/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/epivers.h.in 2005-11-07 21:57:07.849586000 +0100
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@"
+
+#endif /* _epivers_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/etsockio.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/etsockio.h
---- linux-2.4.30/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/etsockio.h linux.dev/arch/mips/bcm947xx/include/etsockio.h
+--- linux.old/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/etsockio.h 2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,59 @@
+/*
+ * Driver-specific socket ioctls
+};
+
+#endif
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/flash.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/flash.h
---- linux-2.4.30/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/flash.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm947xx/include/flash.h
+--- linux.old/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/flash.h 2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,188 @@
+/*
+ * flash.h: Common definitions for flash access.
+ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
+ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
+ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
-+ { 0x0001, 0x2201, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
++ { 0x0001, 0x227e, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
+ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
+ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" },
+ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" },
+extern flash_desc_t flashes[];
+
+#endif
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/flashutl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/flashutl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bcm947xx/include/flashutl.h
+--- linux.old/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/flashutl.h 2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,27 @@
+/*
+ * BCM47XX FLASH driver interface
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#endif /* _flashutl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/hnddma.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/hnddma.h
---- linux-2.4.30/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,184 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/hnddma.h linux.dev/arch/mips/bcm947xx/include/hnddma.h
+--- linux.old/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/hnddma.h 2005-11-07 22:51:38.776726000 +0100
+@@ -0,0 +1,71 @@
+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA engine definitions.
++ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface
+ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright 2005, Broadcom Corporation
+#ifndef _hnddma_h_
+#define _hnddma_h_
+
-+/*
-+ * Each DMA processor consists of a transmit channel and a receive channel.
-+ */
-+typedef volatile struct {
-+ /* transmit channel */
-+ uint32 xmtcontrol; /* enable, et al */
-+ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */
-+ uint32 xmtptr; /* last descriptor posted to chip */
-+ uint32 xmtstatus; /* current active descriptor, et al */
-+
-+ /* receive channel */
-+ uint32 rcvcontrol; /* enable, et al */
-+ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */
-+ uint32 rcvptr; /* last descriptor posted to chip */
-+ uint32 rcvstatus; /* current active descriptor, et al */
-+} dmaregs_t;
-+
++/* export structure */
+typedef volatile struct {
-+ /* diag access */
-+ uint32 fifoaddr; /* diag address */
-+ uint32 fifodatalow; /* low 32bits of data */
-+ uint32 fifodatahigh; /* high 32bits of data */
-+ uint32 pad; /* reserved */
-+} dmafifo_t;
++ /* rx error counters */
++ uint rxgiants; /* rx giant frames */
++ uint rxnobuf; /* rx out of dma descriptors */
++ /* tx error counters */
++ uint txnobuf; /* tx out of dma descriptors */
++} hnddma_t;
+
-+/* transmit channel control */
-+#define XC_XE ((uint32)1 << 0) /* transmit enable */
-+#define XC_SE ((uint32)1 << 1) /* transmit suspend request */
-+#define XC_LE ((uint32)1 << 2) /* loopback enable */
-+#define XC_FL ((uint32)1 << 4) /* flush request */
++#ifndef di_t
++#define di_t void
++#endif
+
-+/* transmit descriptor table pointer */
-+#define XP_LD_MASK 0xfff /* last valid descriptor */
-+
-+/* transmit channel status */
-+#define XS_CD_MASK 0x0fff /* current descriptor pointer */
-+#define XS_XS_MASK 0xf000 /* transmit state */
-+#define XS_XS_SHIFT 12
-+#define XS_XS_DISABLED 0x0000 /* disabled */
-+#define XS_XS_ACTIVE 0x1000 /* active */
-+#define XS_XS_IDLE 0x2000 /* idle wait */
-+#define XS_XS_STOPPED 0x3000 /* stopped */
-+#define XS_XS_SUSP 0x4000 /* suspend pending */
-+#define XS_XE_MASK 0xf0000 /* transmit errors */
-+#define XS_XE_SHIFT 16
-+#define XS_XE_NOERR 0x00000 /* no error */
-+#define XS_XE_DPE 0x10000 /* descriptor protocol error */
-+#define XS_XE_DFU 0x20000 /* data fifo underrun */
-+#define XS_XE_BEBR 0x30000 /* bus error on buffer read */
-+#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */
-+#define XS_AD_MASK 0xfff00000 /* active descriptor */
-+#define XS_AD_SHIFT 20
-+
-+/* receive channel control */
-+#define RC_RE ((uint32)1 << 0) /* receive enable */
-+#define RC_RO_MASK 0xfe /* receive frame offset */
-+#define RC_RO_SHIFT 1
-+#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */
-+
-+/* receive descriptor table pointer */
-+#define RP_LD_MASK 0xfff /* last valid descriptor */
-+
-+/* receive channel status */
-+#define RS_CD_MASK 0x0fff /* current descriptor pointer */
-+#define RS_RS_MASK 0xf000 /* receive state */
-+#define RS_RS_SHIFT 12
-+#define RS_RS_DISABLED 0x0000 /* disabled */
-+#define RS_RS_ACTIVE 0x1000 /* active */
-+#define RS_RS_IDLE 0x2000 /* idle wait */
-+#define RS_RS_STOPPED 0x3000 /* reserved */
-+#define RS_RE_MASK 0xf0000 /* receive errors */
-+#define RS_RE_SHIFT 16
-+#define RS_RE_NOERR 0x00000 /* no error */
-+#define RS_RE_DPE 0x10000 /* descriptor protocol error */
-+#define RS_RE_DFO 0x20000 /* data fifo overflow */
-+#define RS_RE_BEBW 0x30000 /* bus error on buffer write */
-+#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */
-+#define RS_AD_MASK 0xfff00000 /* active descriptor */
-+#define RS_AD_SHIFT 20
-+
-+/* fifoaddr */
-+#define FA_OFF_MASK 0xffff /* offset */
-+#define FA_SEL_MASK 0xf0000 /* select */
-+#define FA_SEL_SHIFT 16
-+#define FA_SEL_XDD 0x00000 /* transmit dma data */
-+#define FA_SEL_XDP 0x10000 /* transmit dma pointers */
-+#define FA_SEL_RDD 0x40000 /* receive dma data */
-+#define FA_SEL_RDP 0x50000 /* receive dma pointers */
-+#define FA_SEL_XFD 0x80000 /* transmit fifo data */
-+#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */
-+#define FA_SEL_RFD 0xc0000 /* receive fifo data */
-+#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */
-+
-+/*
-+ * DMA Descriptor
-+ * Descriptors are only read by the hardware, never written back.
-+ */
-+typedef volatile struct {
-+ uint32 ctrl; /* misc control bits & bufcount */
-+ uint32 addr; /* data buffer address */
-+} dmadd_t;
-+
-+/*
-+ * Each descriptor ring must be 4096byte aligned
-+ * and fit within a single 4096byte page.
-+ */
-+#define DMAMAXRINGSZ 4096
-+#define DMARINGALIGN 4096
-+
-+/* control flags */
-+#define CTRL_BC_MASK 0x1fff /* buffer byte count */
-+#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */
-+#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */
-+#define CTRL_EOF ((uint32)1 << 30) /* end of frame */
-+#define CTRL_SOF ((uint32)1 << 31) /* start of frame */
-+
-+/* control flags in the range [27:20] are core-specific and not defined here */
-+#define CTRL_CORE_MASK 0x0ff00000
-+
-+/* export structure */
-+typedef volatile struct {
-+ /* rx error counters */
-+ uint rxgiants; /* rx giant frames */
-+ uint rxnobuf; /* rx out of dma descriptors */
-+ /* tx error counters */
-+ uint txnobuf; /* tx out of dma descriptors */
-+} hnddma_t;
-+
-+#ifndef di_t
-+#define di_t void
-+#endif
++#ifndef osl_t
++#define osl_t void
++#endif
+
+/* externs */
-+extern void * dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs,
-+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset,
-+ uint ddoffset, uint dataoffset, uint *msg_level);
++extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
++ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level);
+extern void dma_detach(di_t *di);
+extern void dma_txreset(di_t *di);
+extern void dma_rxreset(di_t *di);
+extern void dma_txsuspend(di_t *di);
+extern void dma_txresume(di_t *di);
+extern bool dma_txsuspended(di_t *di);
++extern bool dma_txsuspendedidle(di_t *di);
+extern bool dma_txstopped(di_t *di);
+extern bool dma_rxstopped(di_t *di);
+extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
-+extern int dma_tx(di_t *di, void *p, uint32 coreflags);
+extern void dma_fifoloopbackenable(di_t *di);
+extern void *dma_rx(di_t *di);
+extern void dma_rxfill(di_t *di);
+extern uint dma_txactive(di_t *di);
+extern void dma_txrotate(di_t *di);
+
++extern void dma_rxpiomode(dma32regs_t *);
++extern void dma_txpioloopback(dma32regs_t *);
++
+
+#endif /* _hnddma_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/hndmips.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/hndmips.h
---- linux-2.4.30/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h
+--- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2005-11-07 21:57:07.861586750 +0100
@@ -0,0 +1,16 @@
+/*
+ * Alternate include file for HND sbmips.h since CFE also ships with
+ */
+
+#include "sbmips.h"
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/linux_osl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,341 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/bcm947xx/include/linux_osl.h
+--- linux.old/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h 2005-11-07 22:51:38.776726000 +0100
+@@ -0,0 +1,371 @@
+/*
+ * Linux OS Independent Layer
+ *
+#include <linuxver.h>
+
+/* assert and panic */
++#ifdef __GNUC__
++#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
++#if GCC_VERSION > 30100
+#define ASSERT(exp) do {} while (0)
++#else
++/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/
++#define ASSERT(exp)
++#endif
++#endif
++
++/* microsecond delay */
++#define OSL_DELAY(usec) osl_delay(usec)
++extern void osl_delay(uint usec);
+
+/* PCMCIA attribute space access macros */
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+ osl_pcmcia_read_attr((osh), (offset), (buf), (size))
+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
+ osl_pcmcia_write_attr((osh), (offset), (buf), (size))
-+extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size);
-+extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size);
++extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size);
++extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size);
+
+/* PCI configuration space access macros */
+#define OSL_PCI_READ_CONFIG(osh, offset, size) \
+ osl_pci_read_config((osh), (offset), (size))
+#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
+ osl_pci_write_config((osh), (offset), (size), (val))
-+extern uint32 osl_pci_read_config(void *osh, uint size, uint offset);
-+extern void osl_pci_write_config(void *osh, uint offset, uint size, uint val);
++extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset);
++extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val);
++
++/* PCI device bus # and slot # */
++#define OSL_PCI_BUS(osh) osl_pci_bus(osh)
++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh)
++extern uint osl_pci_bus(osl_t *osh);
++extern uint osl_pci_slot(osl_t *osh);
+
+/* OSL initialization */
-+extern void *osl_attach(void *pdev);
-+extern void osl_detach(void *osh);
++extern osl_t *osl_attach(void *pdev);
++extern void osl_detach(osl_t *osh);
+
+/* host/bus architecture-specific byte swap */
+#define BUS_SWAP32(v) (v)
+#define MFREE(osh, addr, size) osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__)
+#define MALLOCED(osh) osl_malloced((osh))
+#define MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz))
-+extern void *osl_debug_malloc(void *osh, uint size, int line, char* file);
-+extern void osl_debug_mfree(void *osh, void *addr, uint size, int line, char* file);
-+extern char *osl_debug_memdump(void *osh, char *buf, uint sz);
++extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file);
++extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file);
++extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz);
+
+#else
+
+
+#define MALLOC_FAILED(osh) osl_malloc_failed((osh))
+
-+extern void *osl_malloc(void *osh, uint size);
-+extern void osl_mfree(void *osh, void *addr, uint size);
-+extern uint osl_malloced(void *osh);
-+extern uint osl_malloc_failed(void *osh);
++extern void *osl_malloc(osl_t *osh, uint size);
++extern void osl_mfree(osl_t *osh, void *addr, uint size);
++extern uint osl_malloced(osl_t *osh);
++extern uint osl_malloc_failed(osl_t *osh);
+
+/* allocate/free shared (dma-able) consistent memory */
+#define DMA_CONSISTENT_ALIGN PAGE_SIZE
+ osl_dma_alloc_consistent((osh), (size), (pap))
+#define DMA_FREE_CONSISTENT(osh, va, size, pa) \
+ osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
-+extern void *osl_dma_alloc_consistent(void *osh, uint size, ulong *pap);
-+extern void osl_dma_free_consistent(void *osh, void *va, uint size, ulong pa);
++extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap);
++extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa);
+
+/* map/unmap direction */
+#define DMA_TX 1
+ osl_dma_map((osh), (va), (size), (direction))
+#define DMA_UNMAP(osh, pa, size, direction, p) \
+ osl_dma_unmap((osh), (pa), (size), (direction))
-+extern uint osl_dma_map(void *osh, void *va, uint size, int direction);
-+extern void osl_dma_unmap(void *osh, uint pa, uint size, int direction);
++extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction);
++extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction);
+
+/* register access macros */
+#if defined(BCMJTAG)
-+struct bcmjtag_info;
-+extern uint32 bcmjtag_read(struct bcmjtag_info *ejh, uint32 addr, uint size);
-+extern void bcmjtag_write(struct bcmjtag_info *ejh, uint32 addr, uint32 val, uint size);
++#include <bcmjtag.h>
+#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r)))
+#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r)))
+#endif
+
+/* register access macros */
+#if !defined(BCMJTAG)
++#ifndef IL_BIGENDIAN
+#define R_REG(r) ( \
+ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
+ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
+ } \
+} while (0)
++#else /* IL_BIGENDIAN */
++#define R_REG(r) ({ \
++ __typeof(*(r)) __osl_v; \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
++ } \
++ __osl_v; \
++})
++#define W_REG(r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
++#endif
+#endif
+
+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
+#define REG_UNMAP(va) iounmap((void *)(va))
+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) udelay(usec)
-+#include <linux/delay.h>
-+
+/* shared (dma-able) memory access macros */
+#define R_SM(r) *(r)
+#define W_SM(r, v) (*(r) = (v))
+#define BZERO_SM(r, len) memset((r), '\0', (len))
+
+/* packet primitives */
-+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send))
-+#define PKTFREE(drv, skb, send) osl_pktfree((skb))
-+#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data)
-+#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len)
-+#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head))
-+#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
-+#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next)
++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send))
++#define PKTFREE(osh, skb, send) osl_pktfree((skb))
++#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data)
++#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len)
++#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head))
++#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
++#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next)
+#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
-+#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
-+#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
-+#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
-+#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
++#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
++#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
++#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
++#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
+#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum)
+#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x))
+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev)
+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
+#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority)
+#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x))
-+extern void *osl_pktget(void *drv, uint len, bool send);
++extern void *osl_pktget(osl_t *osh, uint len, bool send);
+extern void osl_pktfree(void *skb);
+
+#else /* BINOSL */
+extern int osl_sprintf(char *buf, const char *format, ...);
+extern int osl_strcmp(const char *s1, const char *s2);
+extern int osl_strncmp(const char *s1, const char *s2, uint n);
-+extern int osl_strlen(char *s);
++extern int osl_strlen(const char *s);
+extern char* osl_strcpy(char *d, const char *s);
+extern char* osl_strncpy(char *d, const char *s, uint n);
+
+extern void *osl_reg_map(uint32 pa, uint size);
+extern void osl_reg_unmap(void *va);
+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) osl_delay((usec))
-+extern void osl_delay(uint usec);
-+
+/* shared (dma-able) memory access macros */
+#define R_SM(r) *(r)
+#define W_SM(r, v) (*(r) = (v))
+#define BZERO_SM(r, len) bzero((r), (len))
+
+/* packet primitives */
-+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send))
-+#define PKTFREE(drv, skb, send) osl_pktfree((skb))
-+#define PKTDATA(drv, skb) osl_pktdata((drv), (skb))
-+#define PKTLEN(drv, skb) osl_pktlen((drv), (skb))
-+#define PKTHEADROOM(drv, skb) osl_pktheadroom((drv), (skb))
-+#define PKTTAILROOM(drv, skb) osl_pkttailroom((drv), (skb))
-+#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb))
++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send))
++#define PKTFREE(osh, skb, send) osl_pktfree((skb))
++#define PKTDATA(osh, skb) osl_pktdata((osh), (skb))
++#define PKTLEN(osh, skb) osl_pktlen((osh), (skb))
++#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb))
++#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb))
++#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb))
+#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x))
-+#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len))
-+#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes))
-+#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes))
-+#define PKTDUP(drv, skb) osl_pktdup((drv), (skb))
++#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len))
++#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes))
++#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes))
++#define PKTDUP(osh, skb) osl_pktdup((osh), (skb))
+#define PKTCOOKIE(skb) osl_pktcookie((skb))
+#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x))
+#define PKTLINK(skb) osl_pktlink((skb))
+#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x))
+#define PKTPRIO(skb) osl_pktprio((skb))
+#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x))
-+extern void *osl_pktget(void *drv, uint len, bool send);
++extern void *osl_pktget(osl_t *osh, uint len, bool send);
+extern void osl_pktfree(void *skb);
-+extern uchar *osl_pktdata(void *drv, void *skb);
-+extern uint osl_pktlen(void *drv, void *skb);
-+extern uint osl_pktheadroom(void *drv, void *skb);
-+extern uint osl_pkttailroom(void *drv, void *skb);
-+extern void *osl_pktnext(void *drv, void *skb);
++extern uchar *osl_pktdata(osl_t *osh, void *skb);
++extern uint osl_pktlen(osl_t *osh, void *skb);
++extern uint osl_pktheadroom(osl_t *osh, void *skb);
++extern uint osl_pkttailroom(osl_t *osh, void *skb);
++extern void *osl_pktnext(osl_t *osh, void *skb);
+extern void osl_pktsetnext(void *skb, void *x);
-+extern void osl_pktsetlen(void *drv, void *skb, uint len);
-+extern uchar *osl_pktpush(void *drv, void *skb, int bytes);
-+extern uchar *osl_pktpull(void *drv, void *skb, int bytes);
-+extern void *osl_pktdup(void *drv, void *skb);
++extern void osl_pktsetlen(osl_t *osh, void *skb, uint len);
++extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes);
++extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes);
++extern void *osl_pktdup(osl_t *osh, void *skb);
+extern void *osl_pktcookie(void *skb);
+extern void osl_pktsetcookie(void *skb, void *x);
+extern void *osl_pktlink(void *skb);
+
+#endif /* BINOSL */
+
++#define OSL_ERROR(bcmerror) osl_error(bcmerror)
++extern int osl_error(int bcmerror);
++
+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
+#define PKTBUFSZ 2048
+
+#endif /* _linux_osl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/linuxver.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/linuxver.h
---- linux-2.4.30/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,399 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h
+--- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2005-11-07 22:51:38.780726250 +0100
+@@ -0,0 +1,411 @@
+/*
+ * Linux-specific abstractions to gain some independence from linux kernel versions.
+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
+#include <linux/modversions.h>
+#endif
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
++#include <linux/moduleparam.h>
++#endif
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i")
++#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
++#endif
++
+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
+#include <linux/malloc.h>
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
++#else
++typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
+#endif
+
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+#endif
+
+#endif /* _linuxver_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/min_osl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/min_osl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/min_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/min_osl.h 2005-05-25 03:31:09.000000000 +0200
-@@ -0,0 +1,120 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/min_osl.h linux.dev/arch/mips/bcm947xx/include/min_osl.h
+--- linux.old/arch/mips/bcm947xx/include/min_osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/min_osl.h 2005-11-07 22:51:38.780726250 +0100
+@@ -0,0 +1,126 @@
+/*
+ * HND Minimal OS Abstraction Layer.
+ *
+
+#include <typedefs.h>
+#include <sbconfig.h>
++#include <mipsinc.h>
+
+/* Cache support */
+extern void caches_on(void);
+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
+ do {} while (0)
+
++/* PCI device bus # and slot # */
++#define OSL_PCI_BUS(osh) (0)
++#define OSL_PCI_SLOT(osh) (0)
++
+/* register access macros */
+#define wreg32(r, v) (*(volatile uint32*)(r) = (uint32)(v))
+#define rreg32(r) (*(volatile uint32*)(r))
+#define BUSPROBE(val, addr) (uint32 *)(addr) = (val)
+
+/* Misc stubs */
-+#define osl_attach(pdev) (pdev)
++#define osl_attach(pdev) ((osl_t*)pdev)
+#define osl_detach(osh)
+extern void *osl_init(void);
-+extern int getintvar(char *vars, char *name);
++#define OSL_ERROR(bcmerror) osl_error(bcmerror)
++extern int osl_error(int);
+
+#endif /* _min_osl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/mipsinc.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/mipsinc.h
---- linux-2.4.30/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/mipsinc.h 2005-05-26 02:34:15.000000000 +0200
-@@ -0,0 +1,524 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h
+--- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2005-11-07 22:51:38.780726250 +0100
+@@ -0,0 +1,552 @@
+/*
+ * HND Run Time Environment for standalone MIPS programs.
+ *
+ */
+
+#ifndef _MISPINC_H
-+#define _MISPINC_H
++#define _MISPINC_H
+
+
+/* MIPS defines */
+#define ra $31 /* return address */
+
+
-+/* *********************************************************************
-+ * CP0 Registers
-+ ********************************************************************* */
++/*
++ * CP0 Registers
++ */
+
+#define C0_INX $0
+#define C0_RAND $1
+#define C0_XCTEXT $20
+#define C0_DIAGNOSTIC $22
+#define C0_BROADCOM C0_DIAGNOSTIC
++#define C0_PERFORMANCE $25
+#define C0_ECC $26
+#define C0_CACHEERR $27
+#define C0_TAGLO $28
+/*
+ * LEAF - declare leaf routine
+ */
-+#define LEAF(symbol) \
++#define LEAF(symbol) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol,@function; \
+/*
+ * END - mark end of function
+ */
-+#define END(function) \
++#define END(function) \
+ .end function; \
+ .size function,.-function
+
-+#define _ULCAST_
++#define _ULCAST_
+
+#else
+
+#define STR(x) __STR(x)
+#endif
+
-+#define _ULCAST_ (unsigned long)
++#define _ULCAST_ (unsigned long)
+
+
-+/* *********************************************************************
-+ * CP0 Registers
-+ ********************************************************************* */
++/*
++ * CP0 Registers
++ */
+
+#define C0_INX 0 /* CP0: TLB Index */
+#define C0_RAND 1 /* CP0: TLB Random */
+#define C0_XCTEXT 20 /* CP0: XContext */
+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */
+#define C0_ECC 26 /* CP0: ECC */
+#define C0_CACHEERR 27 /* CP0: CacheErr */
+#define C0_TAGLO 28 /* CP0: TagLo */
+/*
+ * Cache Operations
+ */
-+#define Index_Invalidate_I 0x00
-+#define Index_Writeback_Inv_D 0x01
-+#define Index_Invalidate_SI 0x02
-+#define Index_Writeback_Inv_SD 0x03
++#define Index_Invalidate_I 0x00
++#define Index_Writeback_Inv_D 0x01
++#define Index_Invalidate_SI 0x02
++#define Index_Writeback_Inv_SD 0x03
+#define Index_Load_Tag_I 0x04
+#define Index_Load_Tag_D 0x05
+#define Index_Load_Tag_SI 0x06
+#define Hit_Set_Virtual_SD 0x1f
+#endif
+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Macros to access the system control coprocessor
-+ */
-+
-+#define MFC0(source, sel) \
-+({ \
-+ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
-+ "move\t%0,$1\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ :"=r" (__res) \
-+ : \
-+ :"$1"); \
-+ __res; \
-+})
-+
-+#define MTC0(source, sel, value) \
-+do { \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ "move\t$1,%z0\n\t" \
-+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ : \
-+ :"jr" (value) \
-+ :"$1"); \
-+} while (0)
-+
-+#define get_c0_count() \
-+({ \
-+ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ "mfc0\t%0,$9\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ :"=r" (__res)); \
-+ __res; \
-+})
-+
-+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+ uint lsz, sets, ways;
-+
-+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+ if ((lsz = ((config1 >> 19) & 7)))
-+ lsz = 2 << lsz;
-+ sets = 64 << ((config1 >> 22) & 7);
-+ ways = 1 + ((config1 >> 16) & 7);
-+ *size = lsz * sets * ways;
-+ *lsize = lsz;
-+}
-+
-+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+ uint lsz, sets, ways;
-+
-+ /* Data Cache Size = Associativity * Line Size * Sets Per Way */
-+ if ((lsz = ((config1 >> 10) & 7)))
-+ lsz = 2 << lsz;
-+ sets = 64 << ((config1 >> 13) & 7);
-+ ways = 1 + ((config1 >> 7) & 7);
-+ *size = lsz * sets * ways;
-+ *lsize = lsz;
-+}
-+
-+#define cache_unroll(base,op) \
-+ __asm__ __volatile__(" \
-+ .set noreorder; \
-+ .set mips3; \
-+ cache %1, (%0); \
-+ .set mips0; \
-+ .set reorder" \
-+ : \
-+ : "r" (base), \
-+ "i" (op));
-+
-+#endif /* !_LANGUAGE_ASSEMBLY */
-+
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
-+#undef IE_SW0
-+#undef IE_SW1
-+#undef IE_IRQ0
-+#undef IE_IRQ1
-+#undef IE_IRQ2
-+#undef IE_IRQ3
-+#undef IE_IRQ4
-+#undef IE_IRQ5
-+#define IE_SW0 (1<< 8)
-+#define IE_SW1 (1<< 9)
-+#define IE_IRQ0 (1<<10)
-+#define IE_IRQ1 (1<<11)
-+#define IE_IRQ2 (1<<12)
-+#define IE_IRQ3 (1<<13)
-+#define IE_IRQ4 (1<<14)
-+#define IE_IRQ5 (1<<15)
-+
++#define IE_SW0 (_ULCAST_(1) << 8)
++#define IE_SW1 (_ULCAST_(1) << 9)
++#define IE_IRQ0 (_ULCAST_(1) << 10)
++#define IE_IRQ1 (_ULCAST_(1) << 11)
++#define IE_IRQ2 (_ULCAST_(1) << 12)
++#define IE_IRQ3 (_ULCAST_(1) << 13)
++#define IE_IRQ4 (_ULCAST_(1) << 14)
++#define IE_IRQ5 (_ULCAST_(1) << 15)
++
++#ifndef ST0_UM
+/*
+ * Bitfields in the mips32 cp0 status register
+ */
+#define ST0_IE 0x00000001
+#define ST0_EXL 0x00000002
+#define ST0_ERL 0x00000004
-+/* already defined
+#define ST0_UM 0x00000010
+#define ST0_SWINT0 0x00000100
+#define ST0_SWINT1 0x00000200
-+*/
+#define ST0_HWINT0 0x00000400
+#define ST0_HWINT1 0x00000800
+#define ST0_HWINT2 0x00001000
+#define ST0_CU1 0x20000000
+#define ST0_CU2 0x40000000
+#define ST0_CU3 0x80000000
++#endif
+
+
+/*
+#define C_EXC_SHIFT 2
+#define C_INT 0x0000ff00
+#define C_INT_SHIFT 8
-+/* already defined
-+#define C_SW0 0x00000100
-+#define C_SW1 0x00000200
-+#define C_IRQ0 0x00000400
-+#define C_IRQ1 0x00000800
-+#define C_IRQ2 0x00001000
-+#define C_IRQ3 0x00002000
-+#define C_IRQ4 0x00004000
-+#define C_IRQ5 0x00008000
-+*/
++#define C_SW0 (_ULCAST_(1) << 8)
++#define C_SW1 (_ULCAST_(1) << 9)
++#define C_IRQ0 (_ULCAST_(1) << 10)
++#define C_IRQ1 (_ULCAST_(1) << 11)
++#define C_IRQ2 (_ULCAST_(1) << 12)
++#define C_IRQ3 (_ULCAST_(1) << 13)
++#define C_IRQ4 (_ULCAST_(1) << 14)
++#define C_IRQ5 (_ULCAST_(1) << 15)
+#define C_WP 0x00400000
+#define C_IV 0x00800000
+#define C_CE 0x30000000
+/*
+ * Bits in the cp0 config register select 1.
+ */
-+#define CONF1_FP 0x00000001 /* FPU present */
-+#define CONF1_EP 0x00000002 /* EJTAG present */
-+#define CONF1_CA 0x00000004 /* mips16 implemented */
-+#define CONF1_WR 0x00000008 /* Watch registers present */
-+#define CONF1_PC 0x00000010 /* Performance counters present */
-+#define CONF1_DA_SHIFT 7 /* D$ associativity */
-+#define CONF1_DA_MASK 0x00000380
-+#define CONF1_DA_BASE 1
-+#define CONF1_DL_SHIFT 10 /* D$ line size */
-+#define CONF1_DL_MASK 0x00001c00
-+#define CONF1_DL_BASE 2
-+#define CONF1_DS_SHIFT 13 /* D$ sets/way */
-+#define CONF1_DS_MASK 0x0000e000
-+#define CONF1_DS_BASE 64
-+#define CONF1_IA_SHIFT 16 /* I$ associativity */
-+#define CONF1_IA_MASK 0x00070000
-+#define CONF1_IA_BASE 1
-+#define CONF1_IL_SHIFT 19 /* I$ line size */
-+#define CONF1_IL_MASK 0x00380000
-+#define CONF1_IL_BASE 2
-+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
-+#define CONF1_IS_MASK 0x01c00000
-+#define CONF1_IS_BASE 64
-+#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
-+#define CONF1_MS_SHIFT 25
++#define CONF1_FP 0x00000001 /* FPU present */
++#define CONF1_EP 0x00000002 /* EJTAG present */
++#define CONF1_CA 0x00000004 /* mips16 implemented */
++#define CONF1_WR 0x00000008 /* Watch registers present */
++#define CONF1_PC 0x00000010 /* Performance counters present */
++#define CONF1_DA_SHIFT 7 /* D$ associativity */
++#define CONF1_DA_MASK 0x00000380
++#define CONF1_DA_BASE 1
++#define CONF1_DL_SHIFT 10 /* D$ line size */
++#define CONF1_DL_MASK 0x00001c00
++#define CONF1_DL_BASE 2
++#define CONF1_DS_SHIFT 13 /* D$ sets/way */
++#define CONF1_DS_MASK 0x0000e000
++#define CONF1_DS_BASE 64
++#define CONF1_IA_SHIFT 16 /* I$ associativity */
++#define CONF1_IA_MASK 0x00070000
++#define CONF1_IA_BASE 1
++#define CONF1_IL_SHIFT 19 /* I$ line size */
++#define CONF1_IL_MASK 0x00380000
++#define CONF1_IL_BASE 2
++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
++#define CONF1_IS_MASK 0x01c00000
++#define CONF1_IS_BASE 64
++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
++#define CONF1_MS_SHIFT 25
+
+/* PRID register */
+#define PRID_COPT_MASK 0xff000000
+#define PRID_IMP_BCM4710 0x4000
+#define PRID_IMP_BCM3302 0x9000
+#define PRID_IMP_BCM3303 0x9100
-+#define PRID_IMP_BCM3303 0x9100
+
+#define PRID_IMP_UNKNOWN 0xff00
+
-+#define BCM330X(id) \
++#define BCM330X(id) \
+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
+ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
+
+/* Bits in C0_BROADCOM */
-+#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
-+#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
-+#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
-+#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
+
+/* PreFetch Cache aka Read Ahead Cache */
+
-+#define PFC_CR0 0xff400000 /* control reg 0 */
-+#define PFC_CR1 0xff400004 /* control reg 1 */
++#define PFC_CR0 0xff400000 /* control reg 0 */
++#define PFC_CR1 0xff400004 /* control reg 1 */
++
++/* PFC operations */
++#define PFC_I 0x00000001 /* Enable PFC use for instructions */
++#define PFC_D 0x00000002 /* Enable PFC use for data */
++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */
++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */
++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */
++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */
++#define PFC_DPF 0x00000040 /* Enable directional prefetching */
++#define PFC_FLUSH 0x00000100 /* Flush the PFC */
++#define PFC_BRR 0x40000000 /* Bus error indication */
++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */
++
++/* Handy defaults */
++#define PFC_DISABLED 0
++#define PFC_AUTO 0xffffffff /* auto select the default mode */
++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV)
++#define PFC_INST_NOPF (PFC_I | PFC_CINV)
++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV)
++#define PFC_DATA_NOPF (PFC_D | PFC_CINV)
++#define PFC_I_AND_D (PFC_INST | PFC_DATA)
++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF)
++
+
+/*
+ * These are the UART port assignments, expressed as offsets from the base
+#define UART_MSR 6 /* In: Modem Status Register */
+#define UART_SCR 7 /* I/O: Scratch Register */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_RXRDY 0x01 /* Receiver ready */
+
+
-+#endif /* _MISPINC_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/nvports.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/nvports.h
---- linux-2.4.30/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/nvports.h 2005-02-02 23:41:24.000000000 +0100
-@@ -0,0 +1,55 @@
++#ifndef _LANGUAGE_ASSEMBLY
++
+/*
-+ * BCM53xx RoboSwitch utility functions
-+ *
-+ * Copyright (C) 2002 Broadcom Corporation
-+ * $Id$
++ * Macros to access the system control coprocessor
+ */
+
-+#ifndef _nvports_h_
-+#define _nvports_h_
++#define MFC0(source, sel) \
++({ \
++ int __res; \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
++ "move\t%0,$1\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ :"=r" (__res) \
++ : \
++ :"$1"); \
++ __res; \
++})
+
-+#define uint32 unsigned long
-+#define uint16 unsigned short
-+#define uint unsigned int
-+#define uint8 unsigned char
-+#define uint64 unsigned long long
++#define MTC0(source, sel, value) \
++do { \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ "move\t$1,%z0\n\t" \
++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ : \
++ :"jr" (value) \
++ :"$1"); \
++} while (0)
+
-+enum FORCE_PORT {
-+ FORCE_OFF,
-+ FORCE_10H,
-+ FORCE_10F,
-+ FORCE_100H,
++#define get_c0_count() \
++({ \
++ int __res; \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ "mfc0\t%0,$9\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ :"=r" (__res)); \
++ __res; \
++})
++
++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
++{
++ uint lsz, sets, ways;
++
++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
++ lsz = CONF1_IL_BASE << lsz;
++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
++ *size = lsz * sets * ways;
++ *lsize = lsz;
++}
++
++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
++{
++ uint lsz, sets, ways;
++
++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
++ lsz = CONF1_DL_BASE << lsz;
++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
++ *size = lsz * sets * ways;
++ *lsize = lsz;
++}
++
++#define cache_op(base, op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1, (%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
++
++#define cache_unroll4(base, delta, op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1,0(%0); \
++ cache %1,delta(%0); \
++ cache %1,(2 * delta)(%0); \
++ cache %1,(3 * delta)(%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
++
++#endif /* !_LANGUAGE_ASSEMBLY */
++
++#endif /* _MISPINC_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/nvports.h linux.dev/arch/mips/bcm947xx/include/nvports.h
+--- linux.old/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/nvports.h 2005-11-07 21:57:07.865587000 +0100
+@@ -0,0 +1,55 @@
++/*
++ * BCM53xx RoboSwitch utility functions
++ *
++ * Copyright (C) 2002 Broadcom Corporation
++ * $Id$
++ */
++
++#ifndef _nvports_h_
++#define _nvports_h_
++
++#define uint32 unsigned long
++#define uint16 unsigned short
++#define uint unsigned int
++#define uint8 unsigned char
++#define uint64 unsigned long long
++
++enum FORCE_PORT {
++ FORCE_OFF,
++ FORCE_10H,
++ FORCE_10F,
++ FORCE_100H,
+ FORCE_100F,
+ FORCE_DOWN,
+ POWER_OFF
+
+
+
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/osl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/osl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/osl.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,39 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h
+--- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2005-11-07 22:51:38.780726250 +0100
+@@ -0,0 +1,42 @@
+/*
-+ * OS Independent Layer
++ * OS Abstraction Layer
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+#ifndef _osl_h_
+#define _osl_h_
+
++/* osl handle type forward declaration */
++typedef struct os_handle osl_t;
++
+#if defined(linux)
+#include <linux_osl.h>
+#elif defined(NDIS)
+#define MAXPRIO 7 /* 0-7 */
+
+#endif /* _osl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/pcicfg.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/pcicfg.h
---- linux-2.4.30/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-02-02 23:16:39.000000000 +0100
-@@ -0,0 +1,369 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h
+--- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2005-11-07 22:51:38.780726250 +0100
+@@ -0,0 +1,451 @@
+/*
+ * pcicfg.h: PCI configuration constants and structures.
+ *
+#define PCICFG_BUS_SHIFT 16 /* Bus shift */
+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
+#define PCICFG_FUN_SHIFT 8 /* Function shift */
-+#define PCICFG_OFF_SHIFT 0 /* Bus shift */
++#define PCICFG_OFF_SHIFT 0 /* Register shift */
+
+#define PCICFG_BUS_MASK 0xff /* Bus mask */
+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
+
++/* PCIE Config space accessing MACROS*/
++
++#define PCIECFG_BUS_SHIFT 24 /* Bus shift */
++#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */
++#define PCIECFG_FUN_SHIFT 16 /* Function shift */
++#define PCIECFG_OFF_SHIFT 0 /* Register shift */
++
++#define PCIECFG_BUS_MASK 0xff /* Bus mask */
++#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */
++#define PCIECFG_FUN_MASK 7 /* Function mask */
++#define PCIECFG_OFF_MASK 0x3ff /* Register mask */
++
++#define PCIE_CONFIG_ADDR(b, s, f, o) \
++ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \
++ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \
++ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \
++ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
+
++#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
++#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
++#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
++#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
++
++
+/* The actual config space */
+
+#define PCI_BAR_MAX 6
+
+#define PCR_RSVDA_MAX 2
+
++/* pci config status reg has a bit to indicate that capability ptr is present*/
++
++#define PCI_CAPPTR_PRESENT 0x0010
++
+typedef struct _pci_config_regs {
+ unsigned short vendor;
+ unsigned short device;
+#define PCI_CFG_SVID 0x2c
+#define PCI_CFG_SSID 0x2e
+#define PCI_CFG_ROMBAR 0x30
++#define PCI_CFG_CAPPTR 0x34
+#define PCI_CFG_INT 0x3c
+#define PCI_CFG_PIN 0x3d
+#define PCI_CFG_MINGNT 0x3e
+ unsigned char dev_dep[192];
+} ppb_config_regs;
+
-+/* Eveything below is BRCM HND proprietary */
++
++/* PCI CAPABILITY DEFINES */
++#define PCI_CAP_POWERMGMTCAP_ID 0x01
++#define PCI_CAP_MSICAP_ID 0x05
++#define PCI_CAP_PCIECAP_ID 0x10
++
++/* Data structure to define the Message Signalled Interrupt facility
++ * Valid for PCI and PCIE configurations */
++typedef struct _pciconfig_cap_msi {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short msgctrl;
++ unsigned int msgaddr;
++} pciconfig_cap_msi;
++
++/* Data structure to define the Power managment facility
++ * Valid for PCI and PCIE configurations */
++typedef struct _pciconfig_cap_pwrmgmt {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short pme_cap;
++ unsigned short pme_sts_ctrl;
++ unsigned char pme_bridge_ext;
++ unsigned char data;
++} pciconfig_cap_pwrmgmt;
++
++/* Data structure to define the PCIE capability */
++typedef struct _pciconfig_cap_pcie {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short pcie_cap;
++ unsigned int dev_cap;
++ unsigned short dev_ctrl;
++ unsigned short dev_status;
++ unsigned int link_cap;
++ unsigned short link_ctrl;
++ unsigned short link_status;
++} pciconfig_cap_pcie;
++
++/* PCIE Enhanced CAPABILITY DEFINES */
++#define PCIE_EXTCFG_OFFSET 0x100
++#define PCIE_ADVERRREP_CAPID 0x0001
++#define PCIE_VC_CAPID 0x0002
++#define PCIE_DEVSNUM_CAPID 0x0003
++#define PCIE_PWRBUDGET_CAPID 0x0004
++
++/* Header to define the PCIE specific capabilities in the extended config space */
++typedef struct _pcie_enhanced_caphdr {
++ unsigned short capID;
++ unsigned short cap_ver : 4;
++ unsigned short next_ptr : 12;
++} pcie_enhanced_caphdr;
++
++
++/* Everything below is BRCM HND proprietary */
+
+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
+#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */
+
+#endif
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/pmon_osl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/pmon_osl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/pmon_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/pmon_osl.h 2005-02-02 23:16:39.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/pmon_osl.h linux.dev/arch/mips/bcm947xx/include/pmon_osl.h
+--- linux.old/arch/mips/bcm947xx/include/pmon_osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/pmon_osl.h 2005-11-07 21:57:07.869587250 +0100
@@ -0,0 +1,126 @@
+/*
+ * MIPS PMON boot loader OS Abstraction Layer.
+extern void et_pktfree(void *drv, struct lbuf *lb, bool send);
+
+#endif /* _pmon_osl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/proto/802.11.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/802.11.h
---- linux-2.4.30/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,897 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/proto/802.11.h linux.dev/arch/mips/bcm947xx/include/proto/802.11.h
+--- linux.old/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/proto/802.11.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,930 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ uint16 capability; /* capability information */
+ uint16 listen; /* listen interval */
+} PACKED;
++#define DOT11_ASSOC_REQ_FIXED_LEN 4 /* length of assoc frame without info elts */
++
++struct dot11_reassoc_req {
++ uint16 capability; /* capability information */
++ uint16 listen; /* listen interval */
++ struct ether_addr ap; /* Current AP address */
++} PACKED;
++#define DOT11_REASSOC_REQ_FIXED_LEN 10 /* length of assoc frame without info elts */
+
+struct dot11_assoc_resp {
+ uint16 capability; /* capability information */
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN 3
+
++struct dot11_action_switch_channel {
++ uint8 category;
++ uint8 action;
++ uint8 data[5]; /* for switch IE */
++} PACKED;
++
+/**************
+ 802.11h related definitions.
+**************/
+ uint8 num_channels;
+} dot11_supp_channels_t;
+
++/* csa mode type */
++#define DOT11_CSA_MODE_ADVISORY 0
++#define DOT11_CSA_MODE_NO_TX 1
+struct dot11_channel_switch {
+ uint8 id;
+ uint8 len;
+} PACKED;
+typedef struct dot11_channel_switch dot11_channel_switch_t;
+
++/* length of IE data, not including 2 byte header */
++#define DOT11_SWITCH_IE_LEN 3
++
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC 0
+#define QOS_PRIO_MASK 0x0007
+#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
+
++#define QOS_TID_SHIFT 0
++#define QOS_TID_MASK 0x000f
++#define QOS_TID(qos) (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)
++
+/* Ack Policy (0 means Acknowledge) */
+#define QOS_ACK_SHIFT 5
+#define QOS_ACK_MASK 0x0060
+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */
+#define DOT11_MNG_ERP_ID 42
+#define DOT11_MNG_NONERP_ID 47
++#ifdef BCMWPA2
+#define DOT11_MNG_RSN_ID 48
++#endif /* BCMWPA2 */
+#define DOT11_MNG_EXT_RATES_ID 50
+#define DOT11_MNG_WPA_ID 221
+#define DOT11_MNG_PROPR_ID 221
+#define BRF_ABCAP 0x1 /* afterburner capable */
+#define BRF_ABRQRD 0x2 /* afterburner requested */
+#define BRF_LZWDS 0x4 /* lazy wds enabled */
++#define BRF_ABCOUNTER_MASK 0xf0 /* afterburner wds "state" counter */
++#define BRF_ABCOUNTER_SHIFT 4
++
++#define AB_WDS_TIMEOUT_MAX 15 /* afterburner wds Max count indicating not locally capable */
++#define AB_WDS_TIMEOUT_MIN 1 /* afterburner wds, use zero count as indicating "downrev" */
+
+
+/* OUI for BRCM proprietary IE */
+#define WPA_VERSION 1
+#define WPA_OUI "\x00\x50\xF2"
+
++#ifdef BCMWPA2
+#define WPA2_VERSION 1
+#define WPA2_VERSION_LEN 2
+#define WPA2_OUI "\x00\x0F\xAC"
++#endif /* BCMWPA2 */
+
+#define WPA_OUI_LEN 3
+
+#endif
+
+#endif /* _802_11_H_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/proto/bcmeth.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/bcmeth.h
---- linux-2.4.30/arch/mips/bcm947xx/include/proto/bcmeth.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/bcmeth.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,97 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/proto/bcmeth.h linux.dev/arch/mips/bcm947xx/include/proto/bcmeth.h
+--- linux.old/arch/mips/bcm947xx/include/proto/bcmeth.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/proto/bcmeth.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,103 @@
+/*
+ * Broadcom Ethernettype protocol definitions
+ *
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED 0
-+#define BCMILCP_BCM_SUBTYPE_WPA 1
-+#define BCMILCP_BCM_SUBTYPE_EAPOL 2
-+#define BCMILCP_BCM_SUBTYPE_SES 3
++#define BCMILCP_BCM_SUBTYPE_EVENT 1
++#define BCMILCP_BCM_SUBTYPE_SES 2
++/*
++The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
++within BCMILCP_BCM_SUBTYPE_EVENT type messages
++*/
++/*#define BCMILCP_BCM_SUBTYPE_EAPOL 3*/
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0
+
-+typedef struct bcmeth_bcm_hdr
++/* These fields are stored in network order */
++typedef struct bcmeth_hdr
+{
+ uint16 subtype; /* Vendor specific..32769*/
+ uint16 length;
+ uint8 oui[3]; /* Broadcom OUI*/
+ /* user specific Data */
+ uint16 usr_subtype;
-+} PACKED bcmeth_bcm_hdr_t;
++} PACKED bcmeth_hdr_t;
++
+
+
+#undef PACKED
+#endif
+
+#endif
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/ethernet.h
---- linux-2.4.30/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,161 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/proto/bcmip.h linux.dev/arch/mips/bcm947xx/include/proto/bcmip.h
+--- linux.old/arch/mips/bcm947xx/include/proto/bcmip.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/proto/bcmip.h 2005-11-08 00:15:47.881307500 +0100
+@@ -0,0 +1,42 @@
++/*
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
++ * the contents of this file may not be disclosed to third parties, copied
++ * or duplicated in any form, in whole or in part, without the prior
++ * written permission of Broadcom Corporation.
++ *
++ * Fundamental constants relating to IP Protocol
++ *
++ * $Id$
++ */
++
++#ifndef _bcmip_h_
++#define _bcmip_h_
++
++/* IP header */
++#define IPV4_VERIHL_OFFSET 0 /* version and ihl byte offset */
++#define IPV4_TOS_OFFSET 1 /* TOS offset */
++#define IPV4_PROT_OFFSET 9 /* protocol type offset */
++#define IPV4_CHKSUM_OFFSET 10 /* IP header checksum offset */
++#define IPV4_SRC_IP_OFFSET 12 /* src IP addr offset */
++#define IPV4_DEST_IP_OFFSET 16 /* dest IP addr offset */
++
++#define IPV4_VER_MASK 0xf0
++#define IPV4_IHL_MASK 0x0f
++
++#define IPV4_PROT_UDP 17 /* UDP protocol type */
++
++#define IPV4_ADDR_LEN 4 /* IP v4 address length */
++
++#define IPV4_VER_NUM 0x40 /* IP v4 version number */
++
++/* NULL IP address check */
++#define IPV4_ISNULLADDR(a) ((((uint8 *)(a))[0] + ((uint8 *)(a))[1] + \
++ ((uint8 *)(a))[2] + ((uint8 *)(a))[3]) == 0)
++
++#define IPV4_ADDR_STR_LEN 16
++
++#endif /* #ifndef _bcmip_h_ */
++
+diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h
+--- linux.old/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,169 @@
+/*******************************************************************************
+ * $Id$
+ * Copyright 2005, Broadcom Corporation
+#endif
+
+/*
++ * Takes a pointer, sets locally admininistered
++ * address bit in the 48-bit Ethernet address.
++ */
++#define ETHER_SET_LOCALADDR(ea) ( ((uint8 *)(ea))[0] = \
++ (((uint8 *)(ea))[0] | 2) )
++
++/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
++
+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
+#define ether_cmp(a, b) ( \
+ !(((short*)a)[0] == ((short*)b)[0]) | \
+#endif
+
+#endif /* _NET_ETHERNET_H_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/proto/vlan.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/vlan.h
---- linux-2.4.30/arch/mips/bcm947xx/include/proto/vlan.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/vlan.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/proto/vlan.h linux.dev/arch/mips/bcm947xx/include/proto/vlan.h
+--- linux.old/arch/mips/bcm947xx/include/proto/vlan.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/proto/vlan.h 2005-11-07 21:57:07.873587500 +0100
@@ -0,0 +1,50 @@
+/*
+ * 802.1Q VLAN protocol definitions
+#endif
+
+#endif /* _vlan_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/proto/wpa.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/wpa.h
---- linux-2.4.30/arch/mips/bcm947xx/include/proto/wpa.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/proto/wpa.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/proto/wpa.h linux.dev/arch/mips/bcm947xx/include/proto/wpa.h
+--- linux.old/arch/mips/bcm947xx/include/proto/wpa.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/proto/wpa.h 2005-11-07 21:57:07.873587500 +0100
@@ -0,0 +1,140 @@
+/*
+ * Fundamental types and constants relating to WPA
+#endif
+
+#endif /* _proto_wpa_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/rts/crc.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/rts/crc.h
---- linux-2.4.30/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/rts/crc.h linux.dev/arch/mips/bcm947xx/include/rts/crc.h
+--- linux.old/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/rts/crc.h 2005-11-07 21:57:07.873587500 +0100
@@ -0,0 +1,69 @@
+/*******************************************************************************
+ * $Id$
+#endif
+
+#endif /* _RTS_CRC_H_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbchipc.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbchipc.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbchipc.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,394 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h
+--- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,440 @@
+/*
+ * SiliconBackplane Chipcommon core hardware definitions.
+ *
+
+ /* Watchdog timer */
+ uint32 watchdog; /* 0x80 */
-+ uint32 PAD[3];
++ uint32 PAD[1];
++
++ /*GPIO based LED powersave registers corerev >= 16*/
++ uint32 gpiotimerval; /*0x88 */
++ uint32 gpiotimeroutmask;
+
+ /* clock control */
+ uint32 clockcontrol_n; /* 0x90 */
+#define CC_JTAGIR 0x34
+#define CC_JTAGDR 0x38
+#define CC_JTAGCTRL 0x3c
++#define CC_WATCHDOG 0x80
++#define CC_CLKC_N 0x90
++#define CC_CLKC_M0 0x94
++#define CC_CLKC_M1 0x98
++#define CC_CLKC_M2 0x9c
++#define CC_CLKC_M3 0xa0
+#define CC_CLKDIV 0xa4
++#define CC_SYS_CLK_CTL 0xc0
+#define CC_OTP 0x800
+
+/* chipid */
+#define CAP_PWR_CTL 0x00040000 /* Power control */
+#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
+#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
++#define CAP_OTPSIZE_BASE 5 /* OTP Size base */
+#define CAP_JTAGP 0x00400000 /* JTAG Master Present */
+#define CAP_ROM 0x00800000 /* Internal boot rom active */
+
+#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */
+#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+
++/* Fields in the otpstatus register */
++#define OTPS_PROGFAIL 0x80000000
++#define OTPS_PROTECT 0x00000007
++#define OTPS_HW_PROTECT 0x00000001
++#define OTPS_SW_PROTECT 0x00000002
++#define OTPS_CID_PROTECT 0x00000004
++
++/* Fields in the otpcontrol register */
++#define OTPC_RECWAIT 0xff000000
++#define OTPC_PROGWAIT 0x00ffff00
++#define OTPC_PRW_SHIFT 8
++#define OTPC_MAXFAIL 0x00000038
++#define OTPC_VSEL 0x00000006
++#define OTPC_SELVL 0x00000001
++
++/* Fields in otpprog */
++#define OTPP_COL_MASK 0x000000ff
++#define OTPP_ROW_MASK 0x0000ff00
++#define OTPP_ROW_SHIFT 8
++#define OTPP_READERR 0x10000000
++#define OTPP_VALUE 0x20000000
++#define OTPP_VALUE_SHIFT 29
++#define OTPP_READ 0x40000000
++#define OTPP_START 0x80000000
++#define OTPP_BUSY 0x80000000
++
+/* jtagcmd */
+#define JCMD_START 0x80000000
+#define JCMD_BUSY 0x80000000
+
+/* Fields in clkdiv */
+#define CLKD_SFLASH 0x0f000000
-+#define CLKD_SFLASH_SHIFT 24
++#define CLKD_SFLASH_SHIFT 24
+#define CLKD_OTP 0x000f0000
+#define CLKD_OTP_SHIFT 16
+#define CLKD_JTAG 0x00000f00
+#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
-+#define SCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */
-+#define SCC_CD_SHF 16 /* CLockDivider shift */
++#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
++#define SCC_CD_SHIFT 16
+
-+/* sys_clk_ctl */
++/* system_clk_ctl */
+#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */
+#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */
+#define SYCC_FP 0x00000004 /* ForcePLLOn */
+#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */
+#define SYCC_HR 0x00000010 /* Force HT */
-+#define SYCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */
-+#define SYCC_CD_SHF 16 /* CLockDivider shift */
++#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4+divisor)) */
++#define SYCC_CD_SHIFT 16
++
++/* gpiotimerval*/
++#define GPIO_ONTIME_SHIFT 16
+
+/* clockcontrol_n */
+#define CN_N1_MASK 0x3f /* n1 control */
+#define CC_MC_MASK 0x1f000000 /* mux control */
+#define CC_MC_SHIFT 24
+
-+/* N3M Clock control values for 125Mhz */
-+#define CC_125_N 0x0802 /* Default values for bcm4310 */
-+#define CC_125_M 0x04020009
-+#define CC_125_M25 0x11090009
-+#define CC_125_M33 0x11090005
-+
+/* N3M Clock control magic field values */
+#define CC_F6_2 0x02 /* A factor of 2 in */
+#define CC_F6_3 0x03 /* 6-bit fields like */
+#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */
+#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */
+
++/* Clock control values for 200Mhz in 5350 */
++#define CLKC_5350_N 0x0311
++#define CLKC_5350_M 0x04020009
++
+/* Flash types in the chipcommon capabilities register */
+#define FLASH_NONE 0x000 /* No flash */
+#define SFLASH_ST 0x100 /* ST serial flash */
+#define SFLASH_AT_ID_MASK 0x38
+#define SFLASH_AT_ID_SHIFT 3
+
-+/* OTP conventions */
-+#define OTP_HWBASE 0
-+#define OTP_SWLIM 256
-+#define OTP_CIDBASE 256
-+#define OTP_CIDLIM 260
++/* OTP regions */
++#define OTP_HW_REGION OTPS_HW_PROTECT
++#define OTP_SW_REGION OTPS_SW_PROTECT
++#define OTP_CID_REGION OTPS_CID_PROTECT
+
-+#define OTP_BOUNDARY 252
-+#define OTP_HWSIGN 253
-+#define OTP_SWSIGN 254
-+#define OTP_CIDSIGN 255
++/* OTP regions (Byte offsets from otp size) */
++#define OTP_SWLIM_OFF (-8)
++#define OTP_CIDBASE_OFF 0
++#define OTP_CIDLIM_OFF 8
+
-+#define OTP_CID 256
-+#define OTP_PKG 257
-+#define OTP_FID 258
++/* Predefined OTP words (Word offset from otp size) */
++#define OTP_BOUNDARY_OFF (-4)
++#define OTP_HWSIGN_OFF (-3)
++#define OTP_SWSIGN_OFF (-2)
++#define OTP_CIDSIGN_OFF (-1)
++
++#define OTP_CID_OFF 0
++#define OTP_PKG_OFF 1
++#define OTP_FID_OFF 2
++#define OTP_RSV_OFF 3
++#define OTP_LIM_OFF 4
+
+#define OTP_SIGNATURE 0x578a
+#define OTP_MAGIC 0x4e56
+
+#endif /* _SBCHIPC_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbconfig.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbconfig.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbconfig.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,324 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h
+--- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,342 @@
+/*
+ * Broadcom SiliconBackplane hardware register definitions.
+ *
+
+#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */
+#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */
++#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
++#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
+#define SB_EUART (SB_EXTIF_BASE + 0x00800000)
+#define SB_LED (SB_EXTIF_BASE + 0x00900000)
+
++
+/* enumeration space related defs */
+#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */
+#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
+
+/* sbtmstatelow */
+#define SBTML_RESET 0x1 /* reset */
-+#define SBTML_REJ 0x2 /* reject */
++#define SBTML_REJ_MASK 0x6 /* reject */
++#define SBTML_REJ_SHIFT 1
+#define SBTML_CLK 0x10000 /* clock enable */
+#define SBTML_FGC 0x20000 /* force gated clocks on */
+#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */
+#define SBTMH_BUSY 0x4 /* busy */
+#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */
+#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */
++#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */
+#define SBTMH_GCR 0x20000000 /* gated clock request */
+#define SBTMH_BISTF 0x40000000 /* bist failed */
+#define SBTMH_BISTD 0x80000000 /* bist done */
+
++
+/* sbbwa0 */
+#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */
+#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */
+#define SBIDL_IP_SHIFT 24
+#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */
+#define SBIDL_RV_SHIFT 28
++#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */
++#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */
+
+/* sbidhigh */
-+#define SBIDH_RC_MASK 0xf /* revision code*/
-+#define SBIDH_CC_MASK 0xfff0 /* core code */
++#define SBIDH_RC_MASK 0x000f /* revision code */
++#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */
++#define SBIDH_RCE_SHIFT 8
++#define SBCOREREV(sbidh) \
++ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
++#define SBIDH_CC_MASK 0x8ff0 /* core code */
+#define SBIDH_CC_SHIFT 4
+#define SBIDH_VC_MASK 0xffff0000 /* vendor code */
+#define SBIDH_VC_SHIFT 16
+#define SB_ATA100 0x81d /* parallel ATA core */
+#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */
+#define SB_GIGETH 0x81f /* gigabit ethernet core */
++#define SB_PCIE 0x820 /* pci express core */
++#define SB_SRAMC 0x822 /* SRAM controller core */
++#define SB_MINIMAC 0x823 /* MINI MAC/phy core */
++
++#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */
+
+/* Not really related to Silicon Backplane, but a couple of software
+ * conventions for the use the flash space:
+#define BISZ_DATAEND_IDX 4 /* 4: text start */
+#define BISZ_BSSST_IDX 5 /* 5: text start */
+#define BISZ_BSSEND_IDX 6 /* 6: text start */
++#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */
+
+#endif /* _SBCONFIG_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbextif.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbextif.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbextif.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h
+--- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2005-11-07 21:57:07.877587750 +0100
@@ -0,0 +1,242 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */
+
+#endif /* _SBEXTIF_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbmemc.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbmemc.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbmemc.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,147 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbhnddma.h linux.dev/arch/mips/bcm947xx/include/sbhnddma.h
+--- linux.old/arch/mips/bcm947xx/include/sbhnddma.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbhnddma.h 2005-11-07 23:37:03.453685750 +0100
+@@ -0,0 +1,312 @@
+/*
-+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
++ * Generic Broadcom Home Networking Division (HND) DMA engine HW interface
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
+ * $Id$
+ */
+
-+#ifndef _SBMEMC_H
-+#define _SBMEMC_H
++#ifndef _sbhnddma_h_
++#define _sbhnddma_h_
+
-+#ifdef _LANGUAGE_ASSEMBLY
++
++/* 2byte-wide pio register set per channel(xmt or rcv) */
++typedef volatile struct {
++ uint16 fifocontrol;
++ uint16 fifodata;
++ uint16 fifofree; /* only valid in xmt channel, not in rcv channel */
++ uint16 PAD;
++} pio2regs_t;
+
-+#define MEMC_CONTROL 0x00
-+#define MEMC_CONFIG 0x04
-+#define MEMC_REFRESH 0x08
-+#define MEMC_BISTSTAT 0x0c
-+#define MEMC_MODEBUF 0x10
-+#define MEMC_BKCLS 0x14
-+#define MEMC_PRIORINV 0x18
-+#define MEMC_DRAMTIM 0x1c
-+#define MEMC_INTSTAT 0x20
-+#define MEMC_INTMASK 0x24
-+#define MEMC_INTINFO 0x28
-+#define MEMC_NCDLCTL 0x30
-+#define MEMC_RDNCDLCOR 0x34
-+#define MEMC_WRNCDLCOR 0x38
-+#define MEMC_MISCDLYCTL 0x3c
-+#define MEMC_DQSGATENCDL 0x40
-+#define MEMC_SPARE 0x44
-+#define MEMC_TPADDR 0x48
-+#define MEMC_TPDATA 0x4c
-+#define MEMC_BARRIER 0x50
-+#define MEMC_CORE 0x54
++/* a pair of pio channels(tx and rx) */
++typedef volatile struct {
++ pio2regs_t tx;
++ pio2regs_t rx;
++} pio2regp_t;
+
++/* 4byte-wide pio register set per channel(xmt or rcv) */
++typedef volatile struct {
++ uint32 fifocontrol;
++ uint32 fifodata;
++} pio4regs_t;
+
-+#else
++/* a pair of pio channels(tx and rx) */
++typedef volatile struct {
++ pio4regs_t tx;
++ pio4regs_t rx;
++} pio4regp_t;
+
-+/* Sonics side: MEMC core registers */
-+typedef volatile struct sbmemcregs {
-+ uint32 control;
-+ uint32 config;
-+ uint32 refresh;
-+ uint32 biststat;
-+ uint32 modebuf;
-+ uint32 bkcls;
-+ uint32 priorinv;
-+ uint32 dramtim;
-+ uint32 intstat;
-+ uint32 intmask;
-+ uint32 intinfo;
-+ uint32 reserved1;
-+ uint32 ncdlctl;
-+ uint32 rdncdlcor;
-+ uint32 wrncdlcor;
-+ uint32 miscdlyctl;
-+ uint32 dqsgatencdl;
-+ uint32 spare;
-+ uint32 tpaddr;
-+ uint32 tpdata;
-+ uint32 barrier;
-+ uint32 core;
-+} sbmemcregs_t;
+
-+#endif
+
-+/* MEMC Core Init values (OCP ID 0x80f) */
++/* DMA structure:
++ * support two DMA engines: 32 bits address or 64 bit addressing
++ * basic DMA register set is per channel(transmit or receive)
++ * a pair of channels is defined for convenience
++ */
+
-+/* For sdr: */
-+#define MEMC_SD_CONFIG_INIT 0x00048000
-+#define MEMC_SD_DRAMTIM2_INIT 0x000754d8
-+#define MEMC_SD_DRAMTIM3_INIT 0x000754da
-+#define MEMC_SD_RDNCDLCOR_INIT 0x00000000
-+#define MEMC_SD_WRNCDLCOR_INIT 0x49351200
-+#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */
-+#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b
-+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */
-+#define MEMC_SD_CONTROL_INIT0 0x00000002
-+#define MEMC_SD_CONTROL_INIT1 0x00000008
-+#define MEMC_SD_CONTROL_INIT2 0x00000004
-+#define MEMC_SD_CONTROL_INIT3 0x00000010
-+#define MEMC_SD_CONTROL_INIT4 0x00000001
-+#define MEMC_SD_MODEBUF_INIT 0x00000000
-+#define MEMC_SD_REFRESH_INIT 0x0000840f
+
++/*** 32 bits addressing ***/
+
-+/* This is for SDRM8X8X4 */
-+#define MEMC_SDR_INIT 0x0008
-+#define MEMC_SDR_MODE 0x32
-+#define MEMC_SDR_NCDL 0x00020032
-+#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */
++/* dma registers per channel(xmt or rcv) */
++typedef volatile struct {
++ uint32 control; /* enable, et al */
++ uint32 addr; /* descriptor ring base address (4K aligned) */
++ uint32 ptr; /* last descriptor posted to chip */
++ uint32 status; /* current active descriptor, et al */
++} dma32regs_t;
+
-+/* For ddr: */
-+#define MEMC_CONFIG_INIT 0x00048000
-+#define MEMC_DRAMTIM2_INIT 0x000754d8
-+#define MEMC_DRAMTIM25_INIT 0x000754d9
-+#define MEMC_RDNCDLCOR_INIT 0x00000000
-+#define MEMC_WRNCDLCOR_INIT 0x49351200
-+#define MEMC_1_WRNCDLCOR_INIT 0x14500200
-+#define MEMC_DQSGATENCDL_INIT 0x00030000
-+#define MEMC_MISCDLYCTL_INIT 0x21061c1b
-+#define MEMC_1_MISCDLYCTL_INIT 0x21021400
-+#define MEMC_NCDLCTL_INIT 0x00002001
-+#define MEMC_CONTROL_INIT0 0x00000002
-+#define MEMC_CONTROL_INIT1 0x00000008
-+#define MEMC_MODEBUF_INIT0 0x00004000
-+#define MEMC_CONTROL_INIT2 0x00000010
-+#define MEMC_MODEBUF_INIT1 0x00000100
-+#define MEMC_CONTROL_INIT3 0x00000010
-+#define MEMC_CONTROL_INIT4 0x00000008
-+#define MEMC_REFRESH_INIT 0x0000840f
-+#define MEMC_CONTROL_INIT5 0x00000004
-+#define MEMC_MODEBUF_INIT2 0x00000000
-+#define MEMC_CONTROL_INIT6 0x00000010
-+#define MEMC_CONTROL_INIT7 0x00000001
++typedef volatile struct {
++ dma32regs_t xmt; /* dma tx channel */
++ dma32regs_t rcv; /* dma rx channel */
++} dma32regp_t;
+
++typedef volatile struct { /* diag access */
++ uint32 fifoaddr; /* diag address */
++ uint32 fifodatalow; /* low 32bits of data */
++ uint32 fifodatahigh; /* high 32bits of data */
++ uint32 pad; /* reserved */
++} dma32diag_t;
+
-+/* This is for DDRM16X16X2 */
-+#define MEMC_DDR_INIT 0x0009
-+#define MEMC_DDR_MODE 0x62
-+#define MEMC_DDR_NCDL 0x0005050a
-+#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */
++/*
++ * DMA Descriptor
++ * Descriptors are only read by the hardware, never written back.
++ */
++typedef volatile struct {
++ uint32 ctrl; /* misc control bits & bufcount */
++ uint32 addr; /* data buffer address */
++} dma32dd_t;
+
-+/* mask for sdr/ddr calibration registers */
-+#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff
-+#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff
-+#define MEMC_DQSGATENCDL_G_MASK 0x000000ff
++/*
++ * Each descriptor ring must be 4096byte aligned, and fit within a single 4096byte page.
++ */
++#define D32MAXRINGSZ 4096
++#define D32RINGALIGN 4096
++#define D32MAXDD (D32MAXRINGSZ / sizeof (dma32dd_t))
+
-+/* masks for miscdlyctl registers */
-+#define MEMC_MISC_SM_MASK 0x30000000
-+#define MEMC_MISC_SM_SHIFT 28
++/* transmit channel control */
++#define XC_XE ((uint32)1 << 0) /* transmit enable */
++#define XC_SE ((uint32)1 << 1) /* transmit suspend request */
++#define XC_LE ((uint32)1 << 2) /* loopback enable */
++#define XC_FL ((uint32)1 << 4) /* flush request */
++#define XC_AE ((uint32)3 << 16) /* address extension bits */
++#define XC_AE_SHIFT 16
++
++/* transmit descriptor table pointer */
++#define XP_LD_MASK 0xfff /* last valid descriptor */
++
++/* transmit channel status */
++#define XS_CD_MASK 0x0fff /* current descriptor pointer */
++#define XS_XS_MASK 0xf000 /* transmit state */
++#define XS_XS_SHIFT 12
++#define XS_XS_DISABLED 0x0000 /* disabled */
++#define XS_XS_ACTIVE 0x1000 /* active */
++#define XS_XS_IDLE 0x2000 /* idle wait */
++#define XS_XS_STOPPED 0x3000 /* stopped */
++#define XS_XS_SUSP 0x4000 /* suspend pending */
++#define XS_XE_MASK 0xf0000 /* transmit errors */
++#define XS_XE_SHIFT 16
++#define XS_XE_NOERR 0x00000 /* no error */
++#define XS_XE_DPE 0x10000 /* descriptor protocol error */
++#define XS_XE_DFU 0x20000 /* data fifo underrun */
++#define XS_XE_BEBR 0x30000 /* bus error on buffer read */
++#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */
++#define XS_AD_MASK 0xfff00000 /* active descriptor */
++#define XS_AD_SHIFT 20
++
++/* receive channel control */
++#define RC_RE ((uint32)1 << 0) /* receive enable */
++#define RC_RO_MASK 0xfe /* receive frame offset */
++#define RC_RO_SHIFT 1
++#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */
++#define RC_AE ((uint32)3 << 16) /* address extension bits */
++#define RC_AE_SHIFT 16
++
++/* receive descriptor table pointer */
++#define RP_LD_MASK 0xfff /* last valid descriptor */
++
++/* receive channel status */
++#define RS_CD_MASK 0x0fff /* current descriptor pointer */
++#define RS_RS_MASK 0xf000 /* receive state */
++#define RS_RS_SHIFT 12
++#define RS_RS_DISABLED 0x0000 /* disabled */
++#define RS_RS_ACTIVE 0x1000 /* active */
++#define RS_RS_IDLE 0x2000 /* idle wait */
++#define RS_RS_STOPPED 0x3000 /* reserved */
++#define RS_RE_MASK 0xf0000 /* receive errors */
++#define RS_RE_SHIFT 16
++#define RS_RE_NOERR 0x00000 /* no error */
++#define RS_RE_DPE 0x10000 /* descriptor protocol error */
++#define RS_RE_DFO 0x20000 /* data fifo overflow */
++#define RS_RE_BEBW 0x30000 /* bus error on buffer write */
++#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */
++#define RS_AD_MASK 0xfff00000 /* active descriptor */
++#define RS_AD_SHIFT 20
++
++/* fifoaddr */
++#define FA_OFF_MASK 0xffff /* offset */
++#define FA_SEL_MASK 0xf0000 /* select */
++#define FA_SEL_SHIFT 16
++#define FA_SEL_XDD 0x00000 /* transmit dma data */
++#define FA_SEL_XDP 0x10000 /* transmit dma pointers */
++#define FA_SEL_RDD 0x40000 /* receive dma data */
++#define FA_SEL_RDP 0x50000 /* receive dma pointers */
++#define FA_SEL_XFD 0x80000 /* transmit fifo data */
++#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */
++#define FA_SEL_RFD 0xc0000 /* receive fifo data */
++#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */
++#define FA_SEL_RSD 0xe0000 /* receive frame status data */
++#define FA_SEL_RSP 0xf0000 /* receive frame status pointers */
++
++/* descriptor control flags */
++#define CTRL_BC_MASK 0x1fff /* buffer byte count */
++#define CTRL_AE ((uint32)3 << 16) /* address extension bits */
++#define CTRL_AE_SHIFT 16
++#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */
++#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */
++#define CTRL_EOF ((uint32)1 << 30) /* end of frame */
++#define CTRL_SOF ((uint32)1 << 31) /* start of frame */
++
++/* control flags in the range [27:20] are core-specific and not defined here */
++#define CTRL_CORE_MASK 0x0ff00000
++
++/*** 64 bits addressing ***/
++
++/* dma registers per channel(xmt or rcv) */
++typedef volatile struct {
++ uint32 control; /* enable, et al */
++ uint32 ptr; /* last descriptor posted to chip */
++ uint32 addrlow; /* descriptor ring base address low 32-bits (8K aligned) */
++ uint32 addrhigh; /* descriptor ring base address bits 63:32 (8K aligned) */
++ uint32 status0; /* current descriptor, xmt state */
++ uint32 status1; /* active descriptor, xmt error */
++} dma64regs_t;
++
++typedef volatile struct {
++ dma64regs_t tx; /* dma64 tx channel */
++ dma64regs_t rx; /* dma64 rx channel */
++} dma64regp_t;
++
++typedef volatile struct { /* diag access */
++ uint32 fifoaddr; /* diag address */
++ uint32 fifodatalow; /* low 32bits of data */
++ uint32 fifodatahigh; /* high 32bits of data */
++ uint32 pad; /* reserved */
++} dma64diag_t;
++
++/*
++ * DMA Descriptor
++ * Descriptors are only read by the hardware, never written back.
++ */
++typedef volatile struct {
++ uint32 ctrl1; /* misc control bits & bufcount */
++ uint32 ctrl2; /* buffer count and address extension */
++ uint32 addrlow; /* memory address of the first byte of the date buffer, bits 31:0 */
++ uint32 addrhigh; /* memory address of the first byte of the date buffer, bits 63:32 */
++} dma64dd_t;
++
++/*
++ * Each descriptor ring must be 8kB aligned, and fit within a contiguous 8kB physical addresss.
++ */
++#define D64MAXRINGSZ 8192
++#define D64RINGALIGN 8192
++#define D64MAXDD (D64MAXRINGSZ / sizeof (dma64dd_t))
++
++/* transmit channel control */
++#define D64_XC_XE 0x00000001 /* transmit enable */
++#define D64_XC_SE 0x00000002 /* transmit suspend request */
++#define D64_XC_LE 0x00000004 /* loopback enable */
++#define D64_XC_FL 0x00000010 /* flush request */
++#define D64_XC_AE 0x00110000 /* address extension bits */
++#define D64_XC_AE_SHIFT 16
++
++/* transmit descriptor table pointer */
++#define D64_XP_LD_MASK 0x00000fff /* last valid descriptor */
++
++/* transmit channel status */
++#define D64_XS0_CD_MASK 0x00001fff /* current descriptor pointer */
++#define D64_XS0_XS_MASK 0xf0000000 /* transmit state */
++#define D64_XS0_XS_SHIFT 28
++#define D64_XS0_XS_DISABLED 0x00000000 /* disabled */
++#define D64_XS0_XS_ACTIVE 0x10000000 /* active */
++#define D64_XS0_XS_IDLE 0x20000000 /* idle wait */
++#define D64_XS0_XS_STOPPED 0x30000000 /* stopped */
++#define D64_XS0_XS_SUSP 0x40000000 /* suspend pending */
++
++#define D64_XS1_AD_MASK 0x0001ffff /* active descriptor */
++#define D64_XS1_XE_MASK 0xf0000000 /* transmit errors */
++#define D64_XS1_XE_SHIFT 28
++#define D64_XS1_XE_NOERR 0x00000000 /* no error */
++#define D64_XS1_XE_DPE 0x10000000 /* descriptor protocol error */
++#define D64_XS1_XE_DFU 0x20000000 /* data fifo underrun */
++#define D64_XS1_XE_DTE 0x30000000 /* data transfer error */
++#define D64_XS1_XE_DESRE 0x40000000 /* descriptor read error */
++#define D64_XS1_XE_COREE 0x50000000 /* core error */
++
++/* receive channel control */
++#define D64_RC_RE 0x00000001 /* receive enable */
++#define D64_RC_RO_MASK 0x000000fe /* receive frame offset */
++#define D64_RC_RO_SHIFT 1
++#define D64_RC_FM 0x00000100 /* direct fifo receive (pio) mode */
++#define D64_RC_AE 0x00110000 /* address extension bits */
++#define D64_RC_AE_SHIFT 16
++
++/* receive descriptor table pointer */
++#define D64_RP_LD_MASK 0x00000fff /* last valid descriptor */
++
++/* receive channel status */
++#define D64_RS0_CD_MASK 0x00001fff /* current descriptor pointer */
++#define D64_RS0_RS_MASK 0xf0000000 /* receive state */
++#define D64_RS0_RS_SHIFT 28
++#define D64_RS0_RS_DISABLED 0x00000000 /* disabled */
++#define D64_RS0_RS_ACTIVE 0x10000000 /* active */
++#define D64_RS0_RS_IDLE 0x20000000 /* idle wait */
++#define D64_RS0_RS_STOPPED 0x30000000 /* stopped */
++#define D64_RS0_RS_SUSP 0x40000000 /* suspend pending */
++
++#define D64_RS1_AD_MASK 0x0001ffff /* active descriptor */
++#define D64_RS1_RE_MASK 0xf0000000 /* receive errors */
++#define D64_RS1_RE_SHIFT 28
++#define D64_RS1_RE_NOERR 0x00000000 /* no error */
++#define D64_RS1_RE_DPO 0x10000000 /* descriptor protocol error */
++#define D64_RS1_RE_DFU 0x20000000 /* data fifo overflow */
++#define D64_RS1_RE_DTE 0x30000000 /* data transfer error */
++#define D64_RS1_RE_DESRE 0x40000000 /* descriptor read error */
++#define D64_RS1_RE_COREE 0x50000000 /* core error */
++
++/* fifoaddr */
++#define D64_FA_OFF_MASK 0xffff /* offset */
++#define D64_FA_SEL_MASK 0xf0000 /* select */
++#define D64_FA_SEL_SHIFT 16
++#define D64_FA_SEL_XDD 0x00000 /* transmit dma data */
++#define D64_FA_SEL_XDP 0x10000 /* transmit dma pointers */
++#define D64_FA_SEL_RDD 0x40000 /* receive dma data */
++#define D64_FA_SEL_RDP 0x50000 /* receive dma pointers */
++#define D64_FA_SEL_XFD 0x80000 /* transmit fifo data */
++#define D64_FA_SEL_XFP 0x90000 /* transmit fifo pointers */
++#define D64_FA_SEL_RFD 0xc0000 /* receive fifo data */
++#define D64_FA_SEL_RFP 0xd0000 /* receive fifo pointers */
++#define D64_FA_SEL_RSD 0xe0000 /* receive frame status data */
++#define D64_FA_SEL_RSP 0xf0000 /* receive frame status pointers */
++
++/* descriptor control flags 1 */
++#define D64_CTRL1_EOT ((uint32)1 << 28) /* end of descriptor table */
++#define D64_CTRL1_IOC ((uint32)1 << 29) /* interrupt on completion */
++#define D64_CTRL1_EOF ((uint32)1 << 30) /* end of frame */
++#define D64_CTRL1_SOF ((uint32)1 << 31) /* start of frame */
++
++/* descriptor control flags 2 */
++#define D64_CTRL2_BC_MASK 0x00007fff /* buffer byte count mask */
++#define D64_CTRL2_AE 0x00110000 /* address extension bits */
++#define D64_CTRL2_AE_SHIFT 16
++
++/* control flags in the range [27:20] are core-specific and not defined here */
++#define D64_CTRL_CORE_MASK 0x0ff00000
++
++
++#endif /* _sbhnddma_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h
+--- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,148 @@
++/*
++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
++
++#ifndef _SBMEMC_H
++#define _SBMEMC_H
++
++#ifdef _LANGUAGE_ASSEMBLY
++
++#define MEMC_CONTROL 0x00
++#define MEMC_CONFIG 0x04
++#define MEMC_REFRESH 0x08
++#define MEMC_BISTSTAT 0x0c
++#define MEMC_MODEBUF 0x10
++#define MEMC_BKCLS 0x14
++#define MEMC_PRIORINV 0x18
++#define MEMC_DRAMTIM 0x1c
++#define MEMC_INTSTAT 0x20
++#define MEMC_INTMASK 0x24
++#define MEMC_INTINFO 0x28
++#define MEMC_NCDLCTL 0x30
++#define MEMC_RDNCDLCOR 0x34
++#define MEMC_WRNCDLCOR 0x38
++#define MEMC_MISCDLYCTL 0x3c
++#define MEMC_DQSGATENCDL 0x40
++#define MEMC_SPARE 0x44
++#define MEMC_TPADDR 0x48
++#define MEMC_TPDATA 0x4c
++#define MEMC_BARRIER 0x50
++#define MEMC_CORE 0x54
++
++
++#else
++
++/* Sonics side: MEMC core registers */
++typedef volatile struct sbmemcregs {
++ uint32 control;
++ uint32 config;
++ uint32 refresh;
++ uint32 biststat;
++ uint32 modebuf;
++ uint32 bkcls;
++ uint32 priorinv;
++ uint32 dramtim;
++ uint32 intstat;
++ uint32 intmask;
++ uint32 intinfo;
++ uint32 reserved1;
++ uint32 ncdlctl;
++ uint32 rdncdlcor;
++ uint32 wrncdlcor;
++ uint32 miscdlyctl;
++ uint32 dqsgatencdl;
++ uint32 spare;
++ uint32 tpaddr;
++ uint32 tpdata;
++ uint32 barrier;
++ uint32 core;
++} sbmemcregs_t;
++
++#endif
++
++/* MEMC Core Init values (OCP ID 0x80f) */
++
++/* For sdr: */
++#define MEMC_SD_CONFIG_INIT 0x00048000
++#define MEMC_SD_DRAMTIM2_INIT 0x000754d8
++#define MEMC_SD_DRAMTIM3_INIT 0x000754da
++#define MEMC_SD_RDNCDLCOR_INIT 0x00000000
++#define MEMC_SD_WRNCDLCOR_INIT 0x49351200
++#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */
++#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b
++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */
++#define MEMC_SD_CONTROL_INIT0 0x00000002
++#define MEMC_SD_CONTROL_INIT1 0x00000008
++#define MEMC_SD_CONTROL_INIT2 0x00000004
++#define MEMC_SD_CONTROL_INIT3 0x00000010
++#define MEMC_SD_CONTROL_INIT4 0x00000001
++#define MEMC_SD_MODEBUF_INIT 0x00000000
++#define MEMC_SD_REFRESH_INIT 0x0000840f
++
++
++/* This is for SDRM8X8X4 */
++#define MEMC_SDR_INIT 0x0008
++#define MEMC_SDR_MODE 0x32
++#define MEMC_SDR_NCDL 0x00020032
++#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */
++
++/* For ddr: */
++#define MEMC_CONFIG_INIT 0x00048000
++#define MEMC_DRAMTIM2_INIT 0x000754d8
++#define MEMC_DRAMTIM25_INIT 0x000754d9
++#define MEMC_RDNCDLCOR_INIT 0x00000000
++#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */
++#define MEMC_WRNCDLCOR_INIT 0x49351200
++#define MEMC_1_WRNCDLCOR_INIT 0x14500200
++#define MEMC_DQSGATENCDL_INIT 0x00030000
++#define MEMC_MISCDLYCTL_INIT 0x21061c1b
++#define MEMC_1_MISCDLYCTL_INIT 0x21021400
++#define MEMC_NCDLCTL_INIT 0x00002001
++#define MEMC_CONTROL_INIT0 0x00000002
++#define MEMC_CONTROL_INIT1 0x00000008
++#define MEMC_MODEBUF_INIT0 0x00004000
++#define MEMC_CONTROL_INIT2 0x00000010
++#define MEMC_MODEBUF_INIT1 0x00000100
++#define MEMC_CONTROL_INIT3 0x00000010
++#define MEMC_CONTROL_INIT4 0x00000008
++#define MEMC_REFRESH_INIT 0x0000840f
++#define MEMC_CONTROL_INIT5 0x00000004
++#define MEMC_MODEBUF_INIT2 0x00000000
++#define MEMC_CONTROL_INIT6 0x00000010
++#define MEMC_CONTROL_INIT7 0x00000001
++
++
++/* This is for DDRM16X16X2 */
++#define MEMC_DDR_INIT 0x0009
++#define MEMC_DDR_MODE 0x62
++#define MEMC_DDR_NCDL 0x0005050a
++#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */
++
++/* mask for sdr/ddr calibration registers */
++#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff
++#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff
++#define MEMC_DQSGATENCDL_G_MASK 0x000000ff
++
++/* masks for miscdlyctl registers */
++#define MEMC_MISC_SM_MASK 0x30000000
++#define MEMC_MISC_SM_SHIFT 28
+#define MEMC_MISC_SD_MASK 0x0f000000
+#define MEMC_MISC_SD_SHIFT 24
+
+#define MEMC_CONFIG_DDR 0x00000001
+
+#endif /* _SBMEMC_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbmips.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbmips.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbmips.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,60 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm947xx/include/sbmips.h
+--- linux.old/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbmips.h 2005-11-07 22:51:38.784726500 +0100
+@@ -0,0 +1,62 @@
+/*
+ * Broadcom SiliconBackplane MIPS definitions
+ *
+#ifndef _SBMIPS_H
+#define _SBMIPS_H
+
++#include <mipsinc.h>
++
+#ifndef _LANGUAGE_ASSEMBLY
+
+/* cpp contortions to concatenate w/arg prescan */
+ uint32 timer;
+} mipsregs_t;
+
-+extern uint32 sb_flag(void *sbh);
-+extern uint sb_irq(void *sbh);
++extern uint32 sb_flag(sb_t *sbh);
++extern uint sb_irq(sb_t *sbh);
+
-+extern void BCMINIT(sb_serial_init)(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
++extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
+
-+extern void *sb_jtagm_init(void *sbh, uint clkd, bool exttap);
++extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap);
+extern void sb_jtagm_disable(void *h);
+extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr);
-+extern void BCMINIT(sb_mips_init)(void *sbh);
-+extern uint32 BCMINIT(sb_mips_clock)(void *sbh);
-+extern bool BCMINIT(sb_mips_setclock)(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
++extern void BCMINIT(sb_mips_init)(sb_t *sbh);
++extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh);
++extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
++extern void BCMINIT(enable_pfc)(uint32 mode);
++extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh);
+
-+extern uint32 BCMINIT(sb_memc_get_ncdl)(void *sbh);
-+extern uint32 BCMINIT(sb_mips_get_pfc)(void *sbh);
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#endif /* _SBMIPS_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbpci.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbpci.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbpci.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,117 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h
+--- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2005-11-07 22:51:38.788726750 +0100
+@@ -0,0 +1,122 @@
+/*
+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
+ *
+#define SBTOPCI_RC_READLINE 0x10 /* memory read line */
+#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */
+
++/* PCI core index in SROM shadow area */
++#define SRSH_PI_OFFSET 0 /* first word */
++#define SRSH_PI_MASK 0xf000 /* bit 15:12 */
++#define SRSH_PI_SHIFT 12 /* bit 15:12 */
++
+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
+#define cap_list rsvd_a[0]
+#define bar0_window dev_dep[0x80 - 0x40]
+
+#ifndef _LANGUAGE_ASSEMBLY
+
-+extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
-+extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
++extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
++extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
+extern void sbpci_ban(uint16 core);
-+extern int sbpci_init(void *sbh);
-+extern void sbpci_check(void *sbh);
++extern int sbpci_init(sb_t *sbh);
++extern void sbpci_check(sb_t *sbh);
+
+#endif /* !_LANGUAGE_ASSEMBLY */
+
+#endif /* _SBPCI_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbpcmcia.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbpcmcia.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbpcmcia.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,139 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbpcie.h linux.dev/arch/mips/bcm947xx/include/sbpcie.h
+--- linux.old/arch/mips/bcm947xx/include/sbpcie.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbpcie.h 2005-11-07 23:39:41.403557000 +0100
+@@ -0,0 +1,199 @@
+/*
-+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
++ * BCM43XX SiliconBackplane PCIE core hardware definitions.
+ *
-+ * $Id$
++ * $Id:
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ */
+
-+#ifndef _SBPCMCIA_H
-+#define _SBPCMCIA_H
-+
++#ifndef _SBPCIE_H
++#define _SBPCIE_H
+
-+/* All the addresses that are offsets in attribute space are divided
-+ * by two to account for the fact that odd bytes are invalid in
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif
++
++/* PCIE Enumeration space offsets*/
++#define PCIE_CORE_CONFIG_OFFSET 0x0
++#define PCIE_FUNC0_CONFIG_OFFSET 0x400
++#define PCIE_FUNC1_CONFIG_OFFSET 0x500
++#define PCIE_FUNC2_CONFIG_OFFSET 0x600
++#define PCIE_FUNC3_CONFIG_OFFSET 0x700
++#define PCIE_SPROM_SHADOW_OFFSET 0x800
++#define PCIE_SBCONFIG_OFFSET 0xE00
++
++/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */
++#define PCIE_BAR0_WINMAPCORE_OFFSET 0x0
++#define PCIE_BAR0_EXTSPROM_OFFSET 0x1000
++#define PCIE_BAR0_PCIECORE_OFFSET 0x2000
++#define PCIE_BAR0_CCCOREREG_OFFSET 0x3000
++
++/* SB side: PCIE core and host control registers */
++typedef struct sbpcieregs {
++
++ uint32 PAD[3];
++ uint32 biststatus; /* bist Status: 0x00C*/
++ uint32 PAD[6];
++ uint32 sbtopcimailbox; /* sb to pcie mailbox: 0x028*/
++ uint32 PAD[54];
++ uint32 sbtopcie0; /* sb to pcie translation 0: 0x100 */
++ uint32 sbtopcie1; /* sb to pcie translation 1: 0x104 */
++ uint32 sbtopcie2; /* sb to pcie translation 2: 0x108 */
++ uint32 PAD[4];
++
++ /* pcie core supports in direct access to config space */
++ uint32 configaddr; /* pcie config space access: Address field: 0x120*/
++ uint32 configdata; /* pcie config space access: Data field: 0x124*/
++
++ /* mdio access to serdes */
++ uint32 mdiocontrol; /* controls the mdio access: 0x128 */
++ uint32 mdiodata; /* Data to the mdio access: 0x12c */
++
++ /* pcie protocol phy/dllp/tlp register access mechanism*/
++ uint32 pcieaddr; /* address of the internal registeru: 0x130 */
++ uint32 pciedata; /* Data to/from the internal regsiter: 0x134 */
++
++ uint32 PAD[434];
++ uint16 sprom[36]; /* SPROM shadow Area */
++} sbpcieregs_t;
++
++/* SB to PCIE translation masks */
++#define SBTOPCIE0_MASK 0xfc000000
++#define SBTOPCIE1_MASK 0xfc000000
++#define SBTOPCIE2_MASK 0xc0000000
++
++/* Access type bits (0:1)*/
++#define SBTOPCIE_MEM 0
++#define SBTOPCIE_IO 1
++#define SBTOPCIE_CFG0 2
++#define SBTOPCIE_CFG1 3
++
++/*Prefetch enable bit 2*/
++#define SBTOPCIE_PF 4
++
++/*Write Burst enable for memory write bit 3*/
++#define SBTOPCIE_WR_BURST 8
++
++/* config access */
++#define CONFIGADDR_FUNC_MASK 0x7000
++#define CONFIGADDR_FUNC_SHF 12
++#define CONFIGADDR_REG_MASK 0x0FFF
++#define CONFIGADDR_REG_SHF 0
++
++/* PCIE protocol regs Indirect Address */
++#define PCIEADDR_PROT_MASK 0x300
++#define PCIEADDR_PROT_SHF 8
++#define PCIEADDR_PL_TLP 0
++#define PCIEADDR_PL_DLLP 1
++#define PCIEADDR_PL_PLP 2
++
++/* PCIE protocol PHY diagnostic registers */
++#define PCIE_PLP_MODEREG 0x200 /* Mode*/
++#define PCIE_PLP_STATUSREG 0x204 /* Status*/
++#define PCIE_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */
++#define PCIE_PLP_LTLINKNUMREG 0x20c /* Link Training Link number*/
++#define PCIE_PLP_LTLANENUMREG 0x210 /* Link Training Lane number*/
++#define PCIE_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */
++#define PCIE_PLP_ATTNREG 0x218 /* Attention */
++#define PCIE_PLP_ATTNMASKREG 0x21C /* Attention Mask */
++#define PCIE_PLP_RXERRCTR 0x220 /* Rx Error */
++#define PCIE_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error*/
++#define PCIE_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */
++#define PCIE_PLP_TESTCTRLREG 0x22C /* Test Control reg*/
++#define PCIE_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */
++#define PCIE_PLP_TIMINGOVRDREG 0x234 /* Timing param override */
++#define PCIE_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag*/
++#define PCIE_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag*/
++
++/* PCIE protocol DLLP diagnostic registers */
++#define PCIE_DLLP_LCREG 0x100 /* Link Control*/
++#define PCIE_DLLP_LSREG 0x104 /* Link Status */
++#define PCIE_DLLP_LAREG 0x108 /* Link Attention*/
++#define PCIE_DLLP_LAMASKREG 0x10C /* Link Attention Mask */
++#define PCIE_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num*/
++#define PCIE_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num*/
++#define PCIE_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num*/
++#define PCIE_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */
++#define PCIE_DLLP_LRREG 0x120 /* Link Replay*/
++#define PCIE_DLLP_LACKTOREG 0x124 /* Link Ack Timeout*/
++#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold*/
++#define PCIE_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr*/
++#define PCIE_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr*/
++#define PCIE_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr*/
++#define PCIE_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write*/
++#define PCIE_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */
++#define PCIE_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */
++#define PCIE_DLLP_ERRCTRREG 0x144 /* Error Counter*/
++#define PCIE_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter*/
++#define PCIE_DLLP_TESTREG 0x14C /* Test */
++#define PCIE_DLLP_PKTBIST 0x150 /* Packet BIST*/
++
++/* PCIE protocol TLP diagnostic registers */
++#define PCIE_TLP_CONFIGREG 0x000 /* Configuration */
++#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */
++#define PCIE_TLP_WRDMAUPPER 0x010 /* Write DMA Upper Address*/
++#define PCIE_TLP_WRDMALOWER 0x014 /* Write DMA Lower Address*/
++#define PCIE_TLP_WRDMAREQ_LBEREG 0x018 /* Write DMA Len/ByteEn Req*/
++#define PCIE_TLP_RDDMAUPPER 0x01C /* Read DMA Upper Address*/
++#define PCIE_TLP_RDDMALOWER 0x020 /* Read DMA Lower Address*/
++#define PCIE_TLP_RDDMALENREG 0x024 /* Read DMA Len Req*/
++#define PCIE_TLP_MSIDMAUPPER 0x028 /* MSI DMA Upper Address*/
++#define PCIE_TLP_MSIDMALOWER 0x02C /* MSI DMA Lower Address*/
++#define PCIE_TLP_MSIDMALENREG 0x030 /* MSI DMA Len Req*/
++#define PCIE_TLP_SLVREQLENREG 0x034 /* Slave Request Len*/
++#define PCIE_TLP_FCINPUTSREQ 0x038 /* Flow Control Inputs*/
++#define PCIE_TLP_TXSMGRSREQ 0x03C /* Tx StateMachine and Gated Req*/
++#define PCIE_TLP_ADRACKCNTARBLEN 0x040 /* Address Ack XferCnt and ARB Len*/
++#define PCIE_TLP_DMACPLHDR0 0x044 /* DMA Completion Hdr 0*/
++#define PCIE_TLP_DMACPLHDR1 0x048 /* DMA Completion Hdr 1*/
++#define PCIE_TLP_DMACPLHDR2 0x04C /* DMA Completion Hdr 2*/
++#define PCIE_TLP_DMACPLMISC0 0x050 /* DMA Completion Misc0 */
++#define PCIE_TLP_DMACPLMISC1 0x054 /* DMA Completion Misc1 */
++#define PCIE_TLP_DMACPLMISC2 0x058 /* DMA Completion Misc2 */
++#define PCIE_TLP_SPTCTRLLEN 0x05C /* Split Controller Req len*/
++#define PCIE_TLP_SPTCTRLMSIC0 0x060 /* Split Controller Misc 0*/
++#define PCIE_TLP_SPTCTRLMSIC1 0x064 /* Split Controller Misc 1*/
++#define PCIE_TLP_BUSDEVFUNC 0x068 /* Bus/Device/Func*/
++#define PCIE_TLP_RESETCTR 0x06C /* Reset Counter*/
++#define PCIE_TLP_RTRYBUF 0x070 /* Retry Buffer value*/
++#define PCIE_TLP_TGTDEBUG1 0x074 /* Target Debug Reg1*/
++#define PCIE_TLP_TGTDEBUG2 0x078 /* Target Debug Reg2*/
++#define PCIE_TLP_TGTDEBUG3 0x07C /* Target Debug Reg3*/
++#define PCIE_TLP_TGTDEBUG4 0x080 /* Target Debug Reg4*/
++
++/* MDIO control */
++#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
++#define MDIOCTL_DIVISOR_VAL 0x2
++#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
++#define MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */
++
++/* MDIO Data */
++#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */
++#define MDIODATA_TA 0x00020000 /* Turnaround */
++#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
++#define MDIODATA_REGADDR_MASK 0x003c0000 /* Regaddr Mask */
++#define MDIODATA_DEVADDR_SHF 22 /* Physmedia devaddr shift */
++#define MDIODATA_DEVADDR_MASK 0x0fc00000 /* Physmedia devaddr Mask */
++#define MDIODATA_WRITE 0x10000000 /* write Transaction */
++#define MDIODATA_READ 0x20000000 /* Read Transaction */
++#define MDIODATA_START 0x40000000 /* start of Transaction */
++
++/* MDIO devices (SERDES modules) */
++#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
++#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
++#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
++
++/* SERDES registers */
++#define SERDES_RX_TIMER1 2 /* Rx Timer1 */
++#define SERDES_RX_CDR 6 /* CDR */
++#define SERDES_RX_CDRBW 7 /* CDR BW */
++
++#endif /* _SBPCIE_H */
+diff -urN linux.old/arch/mips/bcm947xx/include/sbpcmcia.h linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h
+--- linux.old/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h 2005-11-07 22:51:38.788726750 +0100
+@@ -0,0 +1,146 @@
++/*
++ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
++ *
++ * $Id$
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ */
++
++#ifndef _SBPCMCIA_H
++#define _SBPCMCIA_H
++
++
++/* All the addresses that are offsets in attribute space are divided
++ * by two to account for the fact that odd bytes are invalid in
+ * attribute space and our read/write routines make the space appear
+ * as if they didn't exist. Still we want to show the original numbers
+ * as documented in the hnd_pcmcia core manual.
+
+/* Subtypes of BRCM_HNBU: */
+
-+#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor &
++#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */
++#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor &
+ * device id and chiprev
+ */
-+#define HNBU_BOARDREV 0x02 /* Two bytes board revision */
-+#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */
-+#define HNBU_OEM 0x04 /* Eight bytes OEM data */
-+#define HNBU_CC 0x05 /* Default country code */
++#define HNBU_BOARDREV 0x02 /* Two bytes board revision */
++#define HNBU_PAPARMS 0x03 /* PA parameters: 1 (old), 8 (sreomrev == 1)
++ * or 9 (sromrev > 1) bytes */
++#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */
++#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */
+#define HNBU_AA 0x06 /* Antennas available */
+#define HNBU_AG 0x07 /* Antenna gain */
-+#define HNBU_BOARDFLAGS 0x08 /* board flags */
-+#define HNBU_LED 0x09 /* LED set */
++#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */
++#define HNBU_LEDS 0x09 /* LED set */
++#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl)
++ * in rev 2
++ */
++#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */
++#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */
+
+
+/* sbtmstatelow */
+#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
+
+#endif /* _SBPCMCIA_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbsdram.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbsdram.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbsdram.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h
+--- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2005-11-07 21:57:07.877587750 +0100
@@ -0,0 +1,75 @@
+/*
+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
+#define MEM8MX16X2 0xc29 /* 32 MB */
+
+#endif /* _SBSDRAM_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbsocram.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbsocram.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbsocram.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbsocram.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/sbsocram.h linux.dev/arch/mips/bcm947xx/include/sbsocram.h
+--- linux.old/arch/mips/bcm947xx/include/sbsocram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbsocram.h 2005-11-07 21:57:07.877587750 +0100
@@ -0,0 +1,37 @@
+/*
+ * BCM47XX Sonics SiliconBackplane embedded ram core
+#define SOCRAM_MEMSIZE_BASESHIFT 16
+
+#endif /* _SBSOCRAM_H */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sbutils.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbutils.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sbutils.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,87 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h
+--- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2005-11-07 22:51:38.788726750 +0100
+@@ -0,0 +1,140 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of Broadcom HNBU SiliconBackplane-based chips.
+#ifndef _sbutils_h_
+#define _sbutils_h_
+
++/*
++ * Datastructure to export all chip specific common variables
++ * public (read-only) portion of sbutils handle returned by
++ * sb_attach()/sb_kattach()
++*/
++
++struct sb_pub {
++
++ uint bustype; /* SB_BUS, PCI_BUS */
++ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE*/
++ uint buscorerev; /* buscore rev */
++ uint buscoreidx; /* buscore index */
++ int ccrev; /* chip common core rev */
++ uint boardtype; /* board type */
++ uint boardvendor; /* board vendor */
++ uint chip; /* chip number */
++ uint chiprev; /* chip revision */
++ uint chippkg; /* chip package option */
++ uint sonicsrev; /* sonics backplane rev */
++};
++
++typedef const struct sb_pub sb_t;
++
+/*
+ * Many of the routines below take an 'sbh' handle as their first arg.
+ * Allocate this by calling sb_attach(). Free it by calling sb_detach().
+ */
+
+/* exported externs */
-+extern void * BCMINIT(sb_attach)(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
-+extern void * BCMINIT(sb_kattach)(void);
-+extern void sb_detach(void *sbh);
-+extern uint BCMINIT(sb_chip)(void *sbh);
-+extern uint BCMINIT(sb_chiprev)(void *sbh);
-+extern uint BCMINIT(sb_chipcrev)(void *sbh);
-+extern uint BCMINIT(sb_chippkg)(void *sbh);
-+extern uint BCMINIT(sb_pcirev)(void *sbh);
-+extern uint BCMINIT(sb_pcmciarev)(void *sbh);
-+extern uint BCMINIT(sb_boardvendor)(void *sbh);
-+extern uint BCMINIT(sb_boardtype)(void *sbh);
-+extern uint sb_bus(void *sbh);
-+extern uint sb_corelist(void *sbh, uint coreid[]);
-+extern uint sb_coreid(void *sbh);
-+extern uint sb_coreidx(void *sbh);
-+extern uint sb_coreunit(void *sbh);
-+extern uint sb_corevendor(void *sbh);
-+extern uint sb_corerev(void *sbh);
-+extern void *sb_osh(void *sbh);
-+extern void *sb_coreregs(void *sbh);
-+extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val);
-+extern bool sb_iscoreup(void *sbh);
-+extern void *sb_setcoreidx(void *sbh, uint coreidx);
-+extern void *sb_setcore(void *sbh, uint coreid, uint coreunit);
-+extern void sb_commit(void *sbh);
++extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
++extern sb_t * BCMINIT(sb_kattach)(void);
++extern void sb_detach(sb_t *sbh);
++extern uint BCMINIT(sb_chip)(sb_t *sbh);
++extern uint BCMINIT(sb_chiprev)(sb_t *sbh);
++extern uint BCMINIT(sb_chipcrev)(sb_t *sbh);
++extern uint BCMINIT(sb_chippkg)(sb_t *sbh);
++extern uint BCMINIT(sb_pcirev)(sb_t *sbh);
++extern bool BCMINIT(sb_war16165)(sb_t *sbh);
++extern uint BCMINIT(sb_pcmciarev)(sb_t *sbh);
++extern uint BCMINIT(sb_boardvendor)(sb_t *sbh);
++extern uint BCMINIT(sb_boardtype)(sb_t *sbh);
++extern uint sb_bus(sb_t *sbh);
++extern uint sb_buscoretype(sb_t *sbh);
++extern uint sb_buscorerev(sb_t *sbh);
++extern uint sb_corelist(sb_t *sbh, uint coreid[]);
++extern uint sb_coreid(sb_t *sbh);
++extern uint sb_coreidx(sb_t *sbh);
++extern uint sb_coreunit(sb_t *sbh);
++extern uint sb_corevendor(sb_t *sbh);
++extern uint sb_corerev(sb_t *sbh);
++extern void *sb_osh(sb_t *sbh);
++extern void *sb_coreregs(sb_t *sbh);
++extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val);
++extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val);
++extern bool sb_iscoreup(sb_t *sbh);
++extern void *sb_setcoreidx(sb_t *sbh, uint coreidx);
++extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit);
++extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit);
++extern void sb_commit(sb_t *sbh);
+extern uint32 sb_base(uint32 admatch);
+extern uint32 sb_size(uint32 admatch);
-+extern void sb_core_reset(void *sbh, uint32 bits);
-+extern void sb_core_tofixup(void *sbh);
-+extern void sb_core_disable(void *sbh, uint32 bits);
++extern void sb_core_reset(sb_t *sbh, uint32 bits);
++extern void sb_core_tofixup(sb_t *sbh);
++extern void sb_core_disable(sb_t *sbh, uint32 bits);
+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
-+extern uint32 sb_clock(void *sbh);
-+extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask);
-+extern void sb_pcmcia_init(void *sbh);
-+extern void sb_watchdog(void *sbh, uint ticks);
-+extern void *sb_gpiosetcore(void *sbh);
-+extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioin(void *sbh);
-+extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val);
-+extern void sb_pwrctl_init(void *sbh);
-+extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh);
-+extern bool sb_pwrctl_clk(void *sbh, uint mode);
-+extern int sb_pwrctl_xtal(void *sbh, uint what, bool on);
-+extern int sb_pwrctl_slowclk(void *sbh, bool set, uint *div);
-+extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg);
-+
-+/* pwrctl xtal what flags */
++extern uint32 sb_clock(sb_t *sbh);
++extern void sb_pci_setup(sb_t *sbh, uint coremask);
++extern void sb_pcmcia_init(sb_t *sbh);
++extern void sb_watchdog(sb_t *sbh, uint ticks);
++extern void *sb_gpiosetcore(sb_t *sbh);
++extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioin(sb_t *sbh);
++extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
++extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val);
++extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority);
++extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority);
++
++extern void sb_clkctl_init(sb_t *sbh);
++extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh);
++extern bool sb_clkctl_clk(sb_t *sbh, uint mode);
++extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on);
++extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn,
++ void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg);
++extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to);
++extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice,
++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif);
++extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset);
++extern uint sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val);
++extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val);
++
++
++
++/*
++* Build device path. Path size must be >= SB_DEVPATH_BUFSZ.
++* The returned path is NULL terminated and has trailing '/'.
++* Return 0 on success, nonzero otherwise.
++*/
++extern int sb_devpath(sb_t *sbh, char *path, int size);
++
++/* clkctl xtal what flags */
+#define XTAL 0x1 /* primary crystal oscillator (2050) */
+#define PLL 0x2 /* main chip pll */
+
-+/* pwrctl clk mode */
++/* clkctl clk mode */
+#define CLK_FAST 0 /* force fast (pll) clock */
-+#define CLK_SLOW 1 /* force slow clock */
-+#define CLK_DYNAMIC 2 /* enable dynamic power control */
++#define CLK_DYNAMIC 2 /* enable dynamic clock control */
++
++
++/* GPIO usage priorities */
++#define GPIO_DRV_PRIORITY 0
++#define GPIO_APP_PRIORITY 1
++
++/* device path */
++#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */
+
+#endif /* _sbutils_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/sflash.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/sflash.h
---- linux-2.4.30/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/sflash.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h
+--- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2005-11-07 21:57:07.881588000 +0100
@@ -0,0 +1,36 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+extern struct sflash * sflash_init(chipcregs_t *cc);
+
+#endif /* _sflash_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/trxhdr.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/trxhdr.h
---- linux-2.4.30/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/trxhdr.h 2005-02-02 23:16:40.000000000 +0100
+diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h
+--- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2005-11-07 21:57:07.881588000 +0100
@@ -0,0 +1,33 @@
+/*
+ * TRX image file header format.
+
+/* Compatibility */
+typedef struct trx_header TRXHDR, *PTRXHDR;
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/typedefs.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/typedefs.h
---- linux-2.4.30/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/typedefs.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,322 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h
+--- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2005-11-07 22:51:38.788726750 +0100
+@@ -0,0 +1,326 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+typedef ULONG_PTR uintptr;
+#endif
+
++#ifdef _HNDRTE_
++typedef long unsigned int size_t;
++#endif
++
+#ifdef _MSC_VER /* Microsoft C */
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+#endif /* _TYPEDEFS_H_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/include/wlioctl.h linux-2.4.30-brcm/arch/mips/bcm947xx/include/wlioctl.h
---- linux-2.4.30/arch/mips/bcm947xx/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/include/wlioctl.h 2005-02-02 23:16:40.000000000 +0100
-@@ -0,0 +1,825 @@
+diff -urN linux.old/arch/mips/bcm947xx/include/wlioctl.h linux.dev/arch/mips/bcm947xx/include/wlioctl.h
+--- linux.old/arch/mips/bcm947xx/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/include/wlioctl.h 2005-11-07 22:51:38.792727000 +0100
+@@ -0,0 +1,1030 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
++#include <proto/bcmeth.h>
++#include <proto/bcmevent.h>
+#include <proto/802.11.h>
+
+/* require default structure packing */
+ WLC_SUP_AUTHENTICATING,
+ WLC_SUP_AUTHENTICATED,
+ WLC_SUP_KEYXCHANGE,
-+ WLC_SUP_KEYED
++ WLC_SUP_KEYED,
++ WLC_SUP_TIMEOUT
+} sup_auth_status_t;
+#endif /* BCMCCX | BCMSUP_PSK */
+
+} wsec_pmk_t;
+
+/* wireless security bitvec */
-+#define WEP_ENABLED 1
-+#define TKIP_ENABLED 2
-+#define AES_ENABLED 4
-+#define WSEC_SWFLAG 8
++#define WEP_ENABLED 0x0001
++#define TKIP_ENABLED 0x0002
++#define AES_ENABLED 0x0004
++#define WSEC_SWFLAG 0x0008
++#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
+#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
+/*#define WPA_AUTH_8021X 0x0020*/ /* 802.1x, reserved */
++
+#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
+#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
+
-+typedef struct wl_led_info {
-+ uint32 index; /* led index */
-+ uint32 behavior;
-+ bool activehi;
-+} wl_led_info_t;
-+
-+/*
-+ * definitions for driver messages passed from WL to NAS.
-+ */
-+/* Use this to recognize wpa and 802.1x driver messages. */
-+static const uint8 wl_wpa_snap_template[] =
-+ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
+
-+#define WL_WPA_MSG_IFNAME_MAX 16
+
-+/* WPA driver message */
-+typedef struct wl_wpa_header {
-+ struct ether_header eth;
-+ struct dot11_llc_snap_header snap;
-+ uint8 version;
-+ uint8 type;
-+ /* version 2 additions */
-+ char ifname[WL_WPA_MSG_IFNAME_MAX];
-+ /* version specific data */
-+ /* uint8 data[1]; */
-+} wl_wpa_header_t;
-+
-+#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-+
-+/* WPA driver message ethertype - private between wlc and nas */
-+#define WL_WPA_ETHER_TYPE 0x9999
-+
-+/* WPA driver message current version */
-+#define WL_WPA_MSG_VERSION 2
-+
-+/* Type field values for the 802.2 driver messages for WPA. */
-+#define WLC_ASSOC_MSG 1
-+#define WLC_DISASSOC_MSG 2
-+#define WLC_PTK_MIC_MSG 3
-+#define WLC_GTK_MIC_MSG 4
-+
-+/* 802.1x driver message */
-+typedef struct wl_eapol_header {
-+ struct ether_header eth;
-+ struct dot11_llc_snap_header snap;
-+ uint8 version;
-+ uint8 reserved;
-+ char ifname[WL_WPA_MSG_IFNAME_MAX];
-+ /* version specific data */
-+ /* uint8 802_1x_msg[1]; */
-+} wl_eapol_header_t;
++/* pmkid */
++#define MAXPMKID 16
+
-+#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
++typedef struct _pmkid
++{
++ struct ether_addr BSSID;
++ uint8 PMKID[WPA2_PMKID_LEN];
++} pmkid_t;
+
-+/* 802.1x driver message ethertype - private between wlc and nas */
-+#define WL_EAPOL_ETHER_TYPE 0x999A
++typedef struct _pmkid_list
++{
++ uint32 npmkid;
++ pmkid_t pmkid[1];
++} pmkid_list_t;
+
-+/* 802.1x driver message current version */
-+#define WL_EAPOL_MSG_VERSION 1
++typedef struct _pmkid_cand {
++ struct ether_addr BSSID;
++ uint8 preauth;
++} pmkid_cand_t;
+
-+#define WL_SECPVT_DATA_LEN (ETHER_HDR_LEN + 4 + WL_WPA_MSG_IFNAME_MAX)
++typedef struct _pmkid_cand_list {
++ uint32 npmkid_cand;
++ pmkid_cand_t pmkid_cand[1];
++} pmkid_cand_list_t;
+
-+/* message header for the private data exchange between nas and wl*/
-+typedef struct wl_secpvt_data {
-+ struct ether_header eth; /* use the Type field in the eth header with the private type*/
-+ uint8 version;
-+ uint8 sub_type;
-+ uint16 data_len;
-+ char ifname[WL_WPA_MSG_IFNAME_MAX];
-+ /* version specific data */
-+ /* uint8 802_1x_msg[1]; */
-+}wl_secpvt_data_t;
+
++typedef struct wl_led_info {
++ uint32 index; /* led index */
++ uint32 behavior;
++ bool activehi;
++} wl_led_info_t;
+
++typedef struct wlc_assoc_info {
++ uint32 req_len;
++ uint32 resp_len;
++ uint32 flags;
++ struct dot11_assoc_req req;
++ struct ether_addr reassoc_bssid; /* used in reassoc's */
++ struct dot11_assoc_resp resp;
++} wl_assoc_info_t;
++/* flags */
++#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
+/* srom read/write struct passed through ioctl */
+typedef struct {
+ uint byteoff; /* byte offset */
+ uint32 byteoff; /* byte offset of the field in d11regs_t */
+ uint32 val; /* read/write value of the field */
+ uint32 size; /* sizeof the field */
++ uint band; /* band (optional) */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls */
+ struct ether_addr ea;
+} scb_val_t;
+
++
+/* Event data type */
-+typedef struct {
-+ uint msg; /* Message (see below) */
-+ struct ether_addr *addr; /* Station address (if applicable) */
-+ uint status; /* Status code (see below) */
-+ uint reason; /* Reason code (if applicable) */
-+ uint auth_type; /* WLC_E_AUTH */
-+ bool link; /* WLC_E_LINK */
-+ bool group; /* WLC_E_MIC_ERROR */
-+ bool flush_txq; /* WLC_E_MIC_ERROR */
++typedef struct wlc_event {
++ wl_event_msg_t event; /* encapsulated event */
++ struct ether_addr *addr; /* used to keep a trace of the potential present of
++ an address in wlc_event_msg_t */
++ void *data; /* used to hang additional data on an event */
++ struct wlc_event *next; /* enables ordered list of pending events */
+} wlc_event_t;
+
++#define BCM_MAC_STATUS_INDICATION (0x40010200L)
++
+typedef struct {
+ uint16 ver; /* version of this struct */
+ uint16 len; /* length in bytes of this structure */
+#define WL_STA_WDS 0x40
+#define WL_WDS_LINKUP 0x80
+
-+/* Event messages */
-+#define WLC_E_SET_SSID 1
-+#define WLC_E_JOIN 2
-+#define WLC_E_START 3
-+#define WLC_E_AUTH 4
-+#define WLC_E_AUTH_IND 5
-+#define WLC_E_DEAUTH 6
-+#define WLC_E_DEAUTH_IND 7
-+#define WLC_E_ASSOC 8
-+#define WLC_E_ASSOC_IND 9
-+#define WLC_E_REASSOC 10
-+#define WLC_E_REASSOC_IND 11
-+#define WLC_E_DISASSOC 12
-+#define WLC_E_DISASSOC_IND 13
-+#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
-+#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
-+#define WLC_E_GOT_BEACONS 16
-+#define WLC_E_LINK 17 /* Link indication */
-+#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
-+#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
-+#define WLC_E_ROAM 20
-+#define WLC_E_TXFAIL 21 /* dot11FailedCount (txfail) */
-+#define WLC_E_LAST 22
-+
-+/* Event status codes */
-+#define WLC_E_STATUS_SUCCESS 0
-+#define WLC_E_STATUS_FAIL 1
-+#define WLC_E_STATUS_TIMEOUT 2
-+#define WLC_E_STATUS_NO_NETWORKS 3
-+#define WLC_E_STATUS_ABORT 4
-+
-+typedef struct wlc_event_cb {
-+ uint msg; /* Event message or 0 for all */
-+ void (*fn)(void *, wlc_event_t *); /* Callback function */
-+ void *context; /* Passed to callback function */
-+ struct wlc_event_cb *next; /* Next in the chain */
-+} wlc_event_cb_t;
+
+/*
+ * Country locale determines which channels are available to us.
+ uint chipnum; /* chip number */
+} wlc_rev_info_t;
+
++#define WL_BRAND_MAX 10
++typedef struct wl_instance_info {
++ uint instance;
++ char brand[WL_BRAND_MAX];
++} wl_instance_info_t;
++
+/* check this magic number */
+#define WLC_IOCTL_MAGIC 0x14e46c77
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC 0
+#define WLC_GET_VERSION 1
-+#define WLC_UP 2
-+#define WLC_DOWN 3
-+#define WLC_DUMP 6
++#define WLC_UP 2
++#define WLC_DOWN 3
++#define WLC_DUMP 6
+#define WLC_GET_MSGLEVEL 7
+#define WLC_SET_MSGLEVEL 8
+#define WLC_GET_PROMISC 9
+#define WLC_SET_PROMISC 10
+#define WLC_GET_RATE 12
-+#define WLC_SET_RATE 13
++/* #define WLC_SET_RATE 13 */ /* no longer supported */
+#define WLC_GET_INSTANCE 14
-+#define WLC_GET_FRAG 15
-+#define WLC_SET_FRAG 16
-+#define WLC_GET_RTS 17
-+#define WLC_SET_RTS 18
++/* #define WLC_GET_FRAG 15 */ /* no longer supported */
++/* #define WLC_SET_FRAG 16 */ /* no longer supported */
++/* #define WLC_GET_RTS 17 */ /* no longer supported */
++/* #define WLC_SET_RTS 18 */ /* no longer supported */
+#define WLC_GET_INFRA 19
+#define WLC_SET_INFRA 20
+#define WLC_GET_AUTH 21
+#define WLC_GET_RADIO 37
+#define WLC_SET_RADIO 38
+#define WLC_GET_PHYTYPE 39
-+#define WLC_GET_WEP 42
-+#define WLC_SET_WEP 43
-+#define WLC_GET_KEY 44
-+#define WLC_SET_KEY 45
-+#define WLC_SCAN 50
++/* #define WLC_GET_WEP 42 */ /* no longer supported */
++/* #define WLC_SET_WEP 43 */ /* no longer supported */
++#define WLC_GET_KEY 44
++#define WLC_SET_KEY 45
++#define WLC_GET_REGULATORY 46
++#define WLC_SET_REGULATORY 47
++#define WLC_SCAN 50
+#define WLC_SCAN_RESULTS 51
+#define WLC_DISASSOC 52
-+#define WLC_REASSOC 53
-+#define WLC_GET_ROAM_TRIGGER 54
++#define WLC_REASSOC 53
++#define WLC_GET_ROAM_TRIGGER 54
+#define WLC_SET_ROAM_TRIGGER 55
+#define WLC_GET_TXANT 61
+#define WLC_SET_TXANT 62
+#define WLC_GET_ANTDIV 63
+#define WLC_SET_ANTDIV 64
-+#define WLC_GET_TXPWR 65
-+#define WLC_SET_TXPWR 66
++/* #define WLC_GET_TXPWR 65 */ /* no longer supported */
++/* #define WLC_SET_TXPWR 66 */ /* no longer supported */
+#define WLC_GET_CLOSED 67
+#define WLC_SET_CLOSED 68
+#define WLC_GET_MACLIST 69
+#define WLC_GET_RATESET 71
+#define WLC_SET_RATESET 72
+#define WLC_GET_LOCALE 73
-+#define WLC_SET_LOCALE 74
++#define WLC_LONGTRAIN 74
+#define WLC_GET_BCNPRD 75
+#define WLC_SET_BCNPRD 76
+#define WLC_GET_DTIMPRD 77
+#define WLC_GET_GMODE_PROTECTION 149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
-+#define WLC_UPGRADE 152
-+#define WLC_GET_MRATE 153
-+#define WLC_SET_MRATE 154
-+#define WLC_GET_ASSOCLIST 159
-+#define WLC_GET_CLK 160
-+#define WLC_SET_CLK 161
-+#define WLC_GET_UP 162
-+#define WLC_OUT 163
-+#define WLC_GET_WPA_AUTH 164
++#define WLC_UPGRADE 152
++/* #define WLC_GET_MRATE 153 */ /* no longer supported */
++/* #define WLC_SET_MRATE 154 */ /* no longer supported */
++#define WLC_GET_ASSOCLIST 159
++#define WLC_GET_CLK 160
++#define WLC_SET_CLK 161
++#define WLC_GET_UP 162
++#define WLC_OUT 163
++#define WLC_GET_WPA_AUTH 164
+#define WLC_SET_WPA_AUTH 165
+#define WLC_GET_GMODE_PROTECTION_CONTROL 178
+#define WLC_SET_GMODE_PROTECTION_CONTROL 179
+#define WLC_SET_WET 231
+#define WLC_GET_KEY_PRIMARY 235
+#define WLC_SET_KEY_PRIMARY 236
++#define WLC_GET_RADAR 242
++#define WLC_SET_RADAR 243
++#define WLC_SET_SPECT_MANAGMENT 244
++#define WLC_GET_SPECT_MANAGMENT 245
+#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER 248
+#define WLC_GET_CS_SCAN_TIMER 249
++#define WLC_SEND_PWR_CONSTRAINT 254
+#define WLC_CURRENT_PWR 256
+#define WLC_GET_CHANNELS_IN_COUNTRY 260
+#define WLC_GET_COUNTRY_LIST 261
+#define WLC_SET_WSEC_PMK 268
+#define WLC_GET_AUTH_MODE 269
+#define WLC_SET_AUTH_MODE 270
-+#define WLC_LAST 273 /* do not change - use get_var/set_var */
++#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
++#define WLC_NVOTPW 274
++/* #define WLC_OTPW 275 */ /* no longer supported */
++#define WLC_SET_LOCALE 278
++#define WLC_LAST 279 /* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
++#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
+
+#define WL_DECRYPT_STATUS_SUCCESS 1
+#define WL_DECRYPT_STATUS_FAILURE 2
+#define WLC_UPGRADE_SUCCESS 0
+#define WLC_UPGRADE_PENDING 1
+
++#ifdef CONFIG_USBRNDIS_RETAIL
++/* struct passed in for WLC_NDCONFIG_ITEM */
++typedef struct {
++ char *name;
++ void *param;
++} ndconfig_item_t;
++#endif
++
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE (1<<0)
+#define WL_RADIO_HW_DISABLE (1<<1)
-+#define WL_RADIO_UNASSOC_DISABLE (1<<2)
++#define WL_RADIO_MPC_DISABLE (1<<2)
++#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any 802.11 channel */
+
+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE (1<<31)
+
++/* "diag" iovar argument and error code */
++#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
++#define WL_DIAG_MEMORY 3 /* d11 memory test */
++#define WL_DIAG_LED 4 /* LED test */
++#define WL_DIAG_REG 5 /* d11/phy register test */
++#define WL_DIAG_SROM 6 /* srom read/crc test */
++#define WL_DIAG_DMA 7 /* DMA test */
++
++#define WL_DIAGERR_SUCCESS 0
++#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
++#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
++#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
++#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
++#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
++#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
++#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
++#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
++#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
++#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
+
+/* Bus types */
+#define WL_SB_BUS 0 /* Silicon Backplane */
+#define WLC_BAND_AUTO 0 /* auto-select */
+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */
+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
++#define WLC_BAND_ALL 3 /* all bands */
++
++/* phy types (returned by WLC_GET_PHYTPE) */
++#define WLC_PHY_TYPE_A 0
++#define WLC_PHY_TYPE_B 1
++#define WLC_PHY_TYPE_G 2
++#define WLC_PHY_TYPE_NULL 0xf
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
+
+
+
++typedef struct {
++ int npulses; /* required number of pulses at n * t_int */
++ int ncontig; /* required number of pulses at t_int */
++ int min_pw; /* minimum pulse width (20 MHz clocks) */
++ int max_pw; /* maximum pulse width (20 MHz clocks) */
++ uint16 thresh0; /* Radar detection, thresh 0 */
++ uint16 thresh1; /* Radar detection, thresh 1 */
++} wl_radar_args_t;
++
++/* radar iovar SET defines */
++#define WL_RADRA_DETECTOR_OFF 0 /* radar dector off */
++#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */
++#define WL_RADAR_SIMULATED 2 /* force radar detector to declare detection once */
++
++/* dfs_status iovar-related defines */
++
++/* cac - channel availability check,
++ * ism - in-service monitoring
++ * csa - channel switching anouncement
++ */
++
++/* cac state values */
++#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */
++#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */
++#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */
++#define WL_DFS_CACSTATE_CSA 3 /* csa */
++#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */
++#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */
++#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */
++#define WL_DFS_CACSTATES 7 /* this many states exist */
++
++/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
++typedef struct {
++ uint state; /* noted by WL_DFS_CACSTATE_XX. */
++ uint duration; /* time spent in ms in state. */
++ /* as dfs enters ISM state, it removes the operational channel from quiet channel list
++ * and notes the channel in channel_cleared. set to 0 if no channel is cleared
++ */
++ uint channel_cleared;
++} wl_dfs_status_t;
++
++#define NUM_PWRCTRL_RATES 12
+
+
+/* 802.11h enforcement levels */
+#define SPECT_MNGMT_OFF 0 /* 11h disabled */
-+#define SPECT_MNGMT_LOOSE 1 /* qllow scan lists to contain non-11h AP */
++#define SPECT_MNGMT_LOOSE 1 /* allow scan lists to contain non-11h AP */
+#define SPECT_MNGMT_STRICT 2 /* prune out non-11h APs from scan list */
-+
++#define SPECT_MNGMT_11D 3 /* switch to 802.11D mode */
+
+#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */
+#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */
+#define WL_CHAN_INACTIVE (1 << 4) /* temporarily out of service due to radar */
+#define WL_CHAN_RADAR_PASSIVE (1 << 5) /* radar channel is in passive mode */
+
++#define WL_MPC_VAL 0x00400000
++#define WL_APSTA_VAL 0x00800000
++#define WL_DFS_VAL 0x01000000
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
+#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
+
++/* number of bytes needed to define a 128-bit mask for MAC event reporting */
++#define WL_EVENTING_MASK_LEN 16
++
+/* Structures and constants used for "vndr_ie" IOVar interface */
+#define VNDR_IE_CMD_LEN 4 /* length of the set command string: "add", "del" (+ NULL) */
+
+#define VNDR_IE_ASSOCRSP_FLAG 0x4
+#define VNDR_IE_AUTHRSP_FLAG 0x8
+
-+typedef struct vndr_ie_info {
++typedef struct {
+ uint32 pktflag; /* bitmask indicating which packet(s) contain this IE */
+ vndr_ie_t vndr_ie_data; /* vendor IE data */
+} vndr_ie_info_t;
+
-+typedef struct vndr_ie_buf {
++typedef struct {
+ int iecount; /* number of entries in the vndr_ie_list[] array */
+ vndr_ie_info_t vndr_ie_list[1]; /* variable size list of vndr_ie_info_t structs */
+} vndr_ie_buf_t;
+
-+typedef struct vndr_ie_setbuf {
++typedef struct {
+ char cmd[VNDR_IE_CMD_LEN]; /* vndr_ie IOVar set command : "add", "del" + NULL */
+ vndr_ie_buf_t vndr_ie_buffer; /* buffer containing Vendor IE list information */
+} vndr_ie_setbuf_t;
+
++/* join target preference types */
++#define WL_JOIN_PREF_RSSI 1 /* by RSSI, mandatory */
++#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers, optional, RSN and WPA as values */
++#define WL_JOIN_PREF_BAND 3 /* by 802.11 band, optional, WLC_BAND_XXXX as values */
++
++/* band preference */
++#define WLJP_BAND_ASSOC_PREF 255 /* use assoc preference settings */
++ /* others use WLC_BAND_XXXX as values */
++
++/* any multicast cipher suite */
++#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00"
++
+#if !defined(__GNUC__)
+#pragma pack(pop)
+#endif
+
-+#endif /* _wlioctl_h_ */
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/Makefile linux-2.4.30-brcm/arch/mips/bcm947xx/Makefile
---- linux-2.4.30/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/Makefile 2005-05-26 15:07:37.000000000 +0200
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for the BCM947xx specific kernel interface routines
-+# under Linux.
-+#
-+
-+EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
++#define NFIFO 6 /* # tx/rx fifopairs */
+
-+O_TARGET := bcm947xx.o
++#define WL_CNT_T_VERSION 1 /* current version of wl_cnt_t struct */
+
-+export-objs := nvram_linux.o setup.o
-+obj-y := prom.o setup.o time.o sbmips.o gpio.o
-+obj-y += nvram.o nvram_linux.o
-+obj-$(CONFIG_PCI) += sbpci.o pcibios.o
++typedef struct {
++ uint16 version; /* see definition of WL_CNT_T_VERSION */
++ uint16 length; /* length of entire structure */
++
++ /* transmit stat counters */
++ uint32 txframe; /* tx data frames */
++ uint32 txbyte; /* tx data bytes */
++ uint32 txretrans; /* tx mac retransmits */
++ uint32 txerror; /* tx data errors */
++ uint32 txctl; /* tx management frames */
++ uint32 txprshort; /* tx short preamble frames */
++ uint32 txserr; /* tx status errors */
++ uint32 txnobuf; /* tx out of buffers errors */
++ uint32 txnoassoc; /* tx discard because we're not associated */
++ uint32 txrunt; /* tx runt frames */
++ uint32 txchit; /* tx header cache hit (fastpath) */
++ uint32 txcmiss; /* tx header cache miss (slowpath) */
++
++ /* transmit chip error counters */
++ uint32 txuflo; /* tx fifo underflows */
++ uint32 txphyerr; /* tx phy errors (indicated in tx status) */
++ uint32 txphycrs;
++
++ /* receive stat counters */
++ uint32 rxframe; /* rx data frames */
++ uint32 rxbyte; /* rx data bytes */
++ uint32 rxerror; /* rx data errors */
++ uint32 rxctl; /* rx management frames */
++ uint32 rxnobuf; /* rx out of buffers errors */
++ uint32 rxnondata; /* rx non data frames in the data channel errors */
++ uint32 rxbadds; /* rx bad DS errors */
++ uint32 rxbadcm; /* rx bad control or management frames */
++ uint32 rxfragerr; /* rx fragmentation errors */
++ uint32 rxrunt; /* rx runt frames */
++ uint32 rxgiant; /* rx giant frames */
++ uint32 rxnoscb; /* rx no scb error */
++ uint32 rxbadproto; /* rx invalid frames */
++ uint32 rxbadsrcmac; /* rx frames with Invalid Src Mac*/
++ uint32 rxbadda; /* rx frames tossed for invalid da */
++ uint32 rxfilter; /* rx frames filtered out */
++
++ /* receive chip error counters */
++ uint32 rxoflo; /* rx fifo overflow errors */
++ uint32 rxuflo[NFIFO]; /* rx dma descriptor underflow errors */
++
++ uint32 d11cnt_txrts_off; /* d11cnt txrts value when reset d11cnt */
++ uint32 d11cnt_rxcrc_off; /* d11cnt rxcrc value when reset d11cnt */
++ uint32 d11cnt_txnocts_off; /* d11cnt txnocts value when reset d11cnt */
++
++ /* misc counters */
++ uint32 dmade; /* tx/rx dma descriptor errors */
++ uint32 dmada; /* tx/rx dma data errors */
++ uint32 dmape; /* tx/rx dma descriptor protocol errors */
++ uint32 reset; /* reset count */
++ uint32 tbtt; /* cnts the TBTT int's */
++ uint32 txdmawar;
++
++ /* MAC counters: 32-bit version of d11.h's macstat_t */
++ uint32 txallfrm; /* total number of frames sent, incl. Data, ACK, RTS, CTS,
++ Control Management (includes retransmissions) */
++ uint32 txrtsfrm; /* number of RTS sent out by the MAC */
++ uint32 txctsfrm; /* number of CTS sent out by the MAC */
++ uint32 txackfrm; /* number of ACK frames sent out */
++ uint32 txdnlfrm; /* Not used */
++ uint32 txbcnfrm; /* beacons transmitted */
++ uint32 txfunfl[8]; /* per-fifo tx underflows */
++ uint32 txtplunfl; /* Template underflows (mac was too slow to transmit ACK/CTS or BCN) */
++ uint32 txphyerror; /* Transmit phy error, type of error is reported in tx-status for
++ driver enqueued frames*/
++ uint32 rxfrmtoolong; /* Received frame longer than legal limit (2346 bytes) */
++ uint32 rxfrmtooshrt; /* Received frame did not contain enough bytes for its frame type */
++ uint32 rxinvmachdr; /* Either the protocol version != 0 or frame type not
++ data/control/management*/
++ uint32 rxbadfcs; /* number of frames for which the CRC check failed in the MAC */
++ uint32 rxbadplcp; /* parity check of the PLCP header failed */
++ uint32 rxcrsglitch; /* PHY was able to correlate the preamble but not the header */
++ uint32 rxstrt; /* Number of received frames with a good PLCP (i.e. passing parity check) */
++ uint32 rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
++ uint32 rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
++ uint32 rxcfrmucast; /* number of received CNTRL frames with good FCS and matching RA */
++ uint32 rxrtsucast; /* number of unicast RTS addressed to the MAC (good FCS) */
++ uint32 rxctsucast; /* number of unicast CTS addressed to the MAC (good FCS)*/
++ uint32 rxackucast; /* number of ucast ACKS received (good FCS)*/
++ uint32 rxdfrmocast; /* number of received DATA frames with good FCS and not matching RA */
++ uint32 rxmfrmocast; /* number of received MGMT frames with good FCS and not matching RA */
++ uint32 rxcfrmocast; /* number of received CNTRL frame with good FCS and not matching RA */
++ uint32 rxrtsocast; /* number of received RTS not addressed to the MAC */
++ uint32 rxctsocast; /* number of received CTS not addressed to the MAC */
++ uint32 rxdfrmmcast; /* number of RX Data multicast frames received by the MAC */
++ uint32 rxmfrmmcast; /* number of RX Management multicast frames received by the MAC */
++ uint32 rxcfrmmcast; /* number of RX Control multicast frames received by the MAC (unlikely
++ to see these) */
++ uint32 rxbeaconmbss; /* beacons received from member of BSS */
++ uint32 rxdfrmucastobss; /* number of unicast frames addressed to the MAC from other BSS (WDS FRAME) */
++ uint32 rxbeaconobss; /* beacons received from other BSS */
++ uint32 rxrsptmout; /* Number of response timeouts for transmitted frames expecting a
++ response */
++ uint32 bcntxcancl; /* transmit beacons cancelled due to receipt of beacon (IBSS) */
++ uint32 rxf0ovfl; /* Number of receive fifo 0 overflows */
++ uint32 rxf1ovfl; /* Number of receive fifo 1 overflows (obsolete) */
++ uint32 rxf2ovfl; /* Number of receive fifo 2 overflows (obsolete) */
++ uint32 txsfovfl; /* Number of transmit status fifo overflows (obsolete) */
++ uint32 pmqovfl; /* Number of PMQ overflows */
++ uint32 rxcgprqfrm; /* Number of received Probe requests that made it into the PRQ fifo */
++ uint32 rxcgprsqovfl; /* Rx Probe Request Que overflow in the AP */
++ uint32 txcgprsfail; /* Tx Probe Response Fail. AP sent probe response but did not get ACK */
++ uint32 txcgprssuc; /* Tx Probe Rresponse Success (ACK was received) */
++ uint32 prs_timeout; /* Number of probe requests that were dropped from the PRQ fifo because
++ a probe response could not be sent out within the time limit defined
++ in M_PRS_MAXTIME */
++ uint32 rxnack; /* Number of NACKS received (Afterburner) */
++ uint32 frmscons; /* Number of frames completed without transmission because of an
++ Afterburner re-queue */
++ uint32 txnack; /* Number of NACKs transmtitted (Afterburner) */
++ uint32 txglitch_nack; /* obsolete */
++ uint32 txburst; /* obsolete */
++ uint32 rxburst; /* obsolete */
++
++ /* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
++ uint32 txfrag; /* dot11TransmittedFragmentCount */
++ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
++ uint32 txfail; /* dot11FailedCount */
++ uint32 txretry; /* dot11RetryCount */
++ uint32 txretrie; /* dot11MultipleRetryCount */
++ uint32 rxdup; /* dot11FrameduplicateCount */
++ uint32 txrts; /* dot11RTSSuccessCount */
++ uint32 txnocts; /* dot11RTSFailureCount */
++ uint32 txnoack; /* dot11ACKFailureCount */
++ uint32 rxfrag; /* dot11ReceivedFragmentCount */
++ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
++ uint32 rxcrc; /* dot11FCSErrorCount */
++ uint32 txfrmsnt; /* dot11TransmittedFrameCount (bogus MIB?) */
++ uint32 rxundec; /* dot11WEPUndecryptableCount */
++
++ /* WPA2 counters (see rxundec for DecryptFailureCount) */
++ uint32 tkipmicfaill; /* TKIPLocalMICFailures */
++ uint32 tkipcntrmsr; /* TKIPCounterMeasuresInvoked */
++ uint32 tkipreplay; /* TKIPReplays */
++ uint32 ccmpfmterr; /* CCMPFormatErrors */
++ uint32 ccmpreplay; /* CCMPReplays */
++ uint32 ccmpundec; /* CCMPDecryptErrors */
++ uint32 fourwayfail; /* FourWayHandshakeFailures */
++ uint32 wepundec; /* dot11WEPUndecryptableCount */
++ uint32 wepicverr; /* dot11WEPICVErrorCount */
++ uint32 decsuccess; /* DecryptSuccessCount */
++ uint32 tkipicverr; /* TKIPICVErrorCount */
++ uint32 wepexcluded; /* dot11WEPExcludedCount */
++} wl_cnt_t;
+
-+include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/nvram.c linux-2.4.30-brcm/arch/mips/bcm947xx/nvram.c
---- linux-2.4.30/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/nvram.c 2005-05-24 17:58:29.000000000 +0200
++#endif /* _wlioctl_h_ */
+diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c
+--- linux.old/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/nvram.c 2005-11-07 21:57:07.881588000 +0100
@@ -0,0 +1,321 @@
+/*
+ * NVRAM variable manipulation (common)
+{
+ BCMINIT(nvram_free)();
+}
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/nvram_linux.c linux-2.4.30-brcm/arch/mips/bcm947xx/nvram_linux.c
---- linux-2.4.30/arch/mips/bcm947xx/nvram_linux.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/nvram_linux.c 2005-05-25 20:02:50.000000000 +0200
-@@ -0,0 +1,617 @@
+diff -urN linux.old/arch/mips/bcm947xx/nvram_linux.c linux.dev/arch/mips/bcm947xx/nvram_linux.c
+--- linux.old/arch/mips/bcm947xx/nvram_linux.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/nvram_linux.c 2005-11-08 00:54:56.755597250 +0100
+@@ -0,0 +1,633 @@
+/*
+ * NVRAM variable manipulation (Linux kernel half)
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <sbchipc.h>
+#include <sbutils.h>
+#include <sbmips.h>
++#include <sflash.h>
+
+/* In BSS to minimize text size and page aligned so it can be mmap()-ed */
+static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE)));
+{
+ struct nvram_header *header;
+ chipcregs_t *cc;
++ struct sflash *info = NULL;
+ int i;
+ uint32 base, off, lim;
++ u32 *src, *dst;
+
+ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) {
+ base = KSEG1ADDR(SB_FLASH2);
+
+ case SFLASH_ST:
+ case SFLASH_AT:
++ if ((info = sflash_init(cc)) == NULL)
++ return;
++ lim = info->size;
++ break;
++
+ case FLASH_NONE:
+ default:
+ return;
+ while (off <= lim) {
+ /* Windowed flash access */
+ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
-+ if (header->magic == NVRAM_MAGIC) {
-+ u32 *src = (u32 *) header;
-+ u32 *dst = (u32 *) nvram_buf;
-+ for (i = 0; i < sizeof(struct nvram_header); i += 4)
-+ *dst++ = *src++;
-+ for (; i < header->len && i < NVRAM_SPACE; i += 4)
-+ *dst++ = ltoh32(*src++);
-+ return;
-+ }
-+
-+ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-+ if (off == 1 KB)
-+ break;
-+ else if (off == 4 KB)
-+ off = 1 KB;
-+ else if (off == lim)
-+ off = 4 KB;
-+ else
-+ off <<= 1;
++ if (header->magic == NVRAM_MAGIC)
++ goto found;
++ off <<= 1;
+ }
++
++ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
++ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB);
++ if (header->magic == NVRAM_MAGIC)
++ goto found;
++
++ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB);
++ if (header->magic == NVRAM_MAGIC)
++ goto found;
++
++ printk("early_nvram_init: NVRAM not found\n");
++ return;
++
++found:
++ src = (u32 *) header;
++ dst = (u32 *) nvram_buf;
++ for (i = 0; i < sizeof(struct nvram_header); i += 4)
++ *dst++ = *src++;
++ for (; i < header->len && i < NVRAM_SPACE; i += 4)
++ *dst++ = ltoh32(*src++);
+}
+
+/* Early (before mm or mtd) read-only access to NVRAM */
+ if (!name)
+ return NULL;
+
++ /* Too early? */
++ if (sbh == NULL)
++ return NULL;
++
+ if (!nvram_buf[0])
+ early_nvram_init();
+
+
+module_init(dev_nvram_init);
+module_exit(dev_nvram_exit);
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/pcibios.c linux-2.4.30-brcm/arch/mips/bcm947xx/pcibios.c
---- linux-2.4.30/arch/mips/bcm947xx/pcibios.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/pcibios.c 2005-05-26 01:15:53.000000000 +0200
+diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
+--- linux.old/arch/mips/bcm947xx/pcibios.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/pcibios.c 2005-11-07 23:59:38.908750500 +0100
@@ -0,0 +1,355 @@
+/*
+ * Low-Level PCI and SB support for BCM47xx (Linux support code)
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <typedefs.h>
+#include <bcmutils.h>
+#include <sbconfig.h>
++#include <sbutils.h>
+#include <sbpci.h>
+#include <pcicfg.h>
-+#include <sbutils.h>
+#include <bcmdevs.h>
+#include <bcmnvram.h>
+
+/* Global SB handle */
-+extern void *bcm947xx_sbh;
++extern sb_t *bcm947xx_sbh;
+extern spinlock_t bcm947xx_sbh_lock;
+
+/* Convenience */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/prom.c linux-2.4.30-brcm/arch/mips/bcm947xx/prom.c
---- linux-2.4.30/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/prom.c 2005-05-22 22:55:51.000000000 +0200
+diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
+--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/prom.c 2005-11-07 21:57:07.885588250 +0100
@@ -0,0 +1,41 @@
+/*
+ * Early initialization code for BCM94710 boards
+prom_free_prom_memory(void)
+{
+}
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/sbmips.c linux-2.4.30-brcm/arch/mips/bcm947xx/sbmips.c
---- linux-2.4.30/arch/mips/bcm947xx/sbmips.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/sbmips.c 2005-05-25 05:06:08.000000000 +0200
-@@ -0,0 +1,982 @@
+diff -urN linux.old/arch/mips/bcm947xx/sbmips.c linux.dev/arch/mips/bcm947xx/sbmips.c
+--- linux.old/arch/mips/bcm947xx/sbmips.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sbmips.c 2005-11-07 23:55:45.682174750 +0100
+@@ -0,0 +1,1038 @@
+/*
+ * BCM47XX Sonics SiliconBackplane MIPS core routines
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <sbchipc.h>
+#include <sbmemc.h>
+#include <mipsinc.h>
++#include <sbutils.h>
+
-+/*
++/*
+ * Returns TRUE if an external UART exists at the given base
+ * register.
+ */
-+static bool
++static bool
+BCMINITFN(serial_exists)(uint8 *regs)
+{
+ uint8 save_mcr, status1;
+ return (status1 == 0x90);
+}
+
-+/*
++/*
+ * Initializes UART access. The callback function will be called once
+ * per found UART.
+ */
-+void
-+BCMINITFN(sb_serial_init)(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
++void
++BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
+{
+ void *regs;
+ ulong base;
+ R_REG(&cc->clockcontrol_n),
+ R_REG(&cc->clockcontrol_m2));
+ div = 1;
-+ } else if (rev >= 3) {
-+ if (pll == PLL_TYPE6) {
-+ /* Fixed ALP clock on 4320 */
++ } else {
++ if (rev >= 11) {
++ /* Fixed ALP clock */
+ baud_base = 20000000;
++ div = 1;
+ /* Set the override bit so we don't divide it */
+ W_REG(&cc->corecontrol, CC_UARTCLKO);
-+ } else {
++ } else if (rev >= 3) {
+ /* Internal backplane clock */
+ baud_base = sb_clock(sbh);
++ div = 2; /* Minimum divisor */
++ W_REG(&cc->clkdiv,
++ ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div));
++ } else {
++ /* Fixed internal backplane clock */
++ baud_base = 88000000;
++ div = 48;
+ }
-+ div = 2; /* Minimum divisor */
-+ W_REG(&cc->clkdiv, ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div));
-+ } else {
-+ /* Fixed internal backplane clock */
-+ baud_base = 88000000;
-+ div = 48;
-+ }
+
-+ /* Clock source depends on strapping if UartClkOverride is unset */
-+ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
-+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
-+ /* Internal divided backplane clock */
-+ baud_base /= div;
-+ } else {
-+ /* Assume external clock of 1.8432 MHz */
-+ baud_base = 1843200;
++ /* Clock source depends on strapping if UartClkOverride is unset */
++ if ((rev > 0) &&
++ ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
++ /* Internal divided backplane clock */
++ baud_base /= div;
++ } else {
++ /* Assume external clock of 1.8432 MHz */
++ baud_base = 1843200;
++ }
+ }
+ }
+
+ * jtag_rwreg. Returns NULL on failure.
+ */
+void *
-+sb_jtagm_init(void *sbh, uint clkd, bool exttap)
++sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap)
+{
+ void *regs;
+
+
+/* Returns the SB interrupt flag of the current core. */
+uint32
-+sb_flag(void *sbh)
++sb_flag(sb_t *sbh)
+{
+ void *regs;
+ sbconfig_t *sb;
+ SBIPS_INT4_SHIFT
+};
+
-+/*
++/*
+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
+ * 0 is returned.
+ */
+uint
-+sb_irq(void *sbh)
++sb_irq(sb_t *sbh)
+{
+ uint idx;
+ void *regs;
+}
+
+/* Clears the specified MIPS IRQ. */
-+static void
-+BCMINITFN(sb_clearirq)(void *sbh, uint irq)
++static void
++BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq)
+{
+ void *regs;
+ sbconfig_t *sb;
+ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
+}
+
-+/*
++/*
+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
+ * IRQ 0 may be assigned more than once.
+ */
-+static void
-+BCMINITFN(sb_setirq)(void *sbh, uint irq, uint coreid, uint coreunit)
++static void
++BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit)
+{
+ void *regs;
+ sbconfig_t *sb;
+ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
+ W_REG(&sb->sbipsflag, flag);
+ }
-+}
++}
+
-+/*
++/*
+ * Initializes clocks and interrupts. SB and NVRAM access must be
+ * initialized prior to calling.
+ */
-+void
-+BCMINITFN(sb_mips_init)(void *sbh)
++void
++BCMINITFN(sb_mips_init)(sb_t *sbh)
+{
+ ulong hz, ns, tmp;
+ extifregs_t *eir;
+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
+ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
+ tmp |= CEIL(120, ns); /* W0 = 120nS */
-+
++
+ // Added by Chen-I for 5365
+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
+ {
+ }
+ else
+ {
-+ if (sb_corerev(sbh) < 9)
++ if (sb_corerev(sbh) < 9)
+ W_REG(&cc->flash_waitcount, tmp);
-+
-+ if ( (sb_corerev(sbh) < 9) ||
-+ ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0) ) {
++
++ if ((sb_corerev(sbh) < 9) ||
++ ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) {
+ W_REG(&cc->pcmcia_memwait, tmp);
+ }
+ }
-+
-+ // Added by Chen-I & Yen for enabling 5350 EXTIF
-+ if (BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID)
-+ {
-+ /* Set programmable interface timing for external uart */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&cc->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
-+ //printf("===========config_REG=%d\n", R_REG(&cc->prog_config));
-+ //printf("-----------config_REG_addr=%x\n", &cc->prog_config);
-+ //printf("===========waitcount_REG=%d\n", R_REG(&cc->prog_waitcount));
-+ //printf("-----------waitcount_REG=%x\n", &cc->prog_waitcount);
-+ }
+ }
+
+ /* Chip specific initialization */
+ BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0);
+ }
+ break;
-+ case BCM4310_DEVICE_ID:
-+ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
-+ break;
-+ case BCM5350_DEVICE_ID:
-+ /* Clear interrupt map */
-+ for (irq = 0; irq <= 4; irq++)
-+ BCMINIT(sb_clearirq)(sbh, irq);
-+ BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0);
-+ BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0);
-+ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0);
-+ BCMINIT(sb_setirq)(sbh, 3, SB_IPSEC, 0);
-+ BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0);
++ case BCM5350_DEVICE_ID:
++ /* Clear interrupt map */
++ for (irq = 0; irq <= 4; irq++)
++ BCMINIT(sb_clearirq)(sbh, irq);
++ BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0);
++ BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0);
++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0);
++ BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0);
++ BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0);
+ break;
+ }
+}
+
+uint32
-+BCMINITFN(sb_mips_clock)(void *sbh)
++BCMINITFN(sb_mips_clock)(sb_t *sbh)
+{
+ extifregs_t *eir;
+ chipcregs_t *cc;
+ n = R_REG(&cc->clockcontrol_n);
+ if ((pll_type == PLL_TYPE2) ||
+ (pll_type == PLL_TYPE4) ||
-+ (pll_type == PLL_TYPE6))
++ (pll_type == PLL_TYPE6) ||
++ (pll_type == PLL_TYPE7))
+ m = R_REG(&cc->clockcontrol_mips);
+ else if (pll_type == PLL_TYPE5) {
+ rate = 200000000;
+
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
+
-+static void
++static void
+BCMINITFN(handler)(void)
+{
+ /* Step 11 */
+}
+
+/* The following MUST come right after handler() */
-+static void
++static void
+BCMINITFN(afterhandler)(void)
+{
+}
+/*
+ * Set the MIPS, backplane and PCI clocks as closely as possible.
+ */
-+bool
-+BCMINITFN(sb_mips_setclock)(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
++bool
++BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
+{
+ extifregs_t *eir = NULL;
+ chipcregs_t *cc = NULL;
+ mipsregs_t *mipsr = NULL;
+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2;
-+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg;
+ uint32 pll_type, sync_mode;
+ uint ic_size, ic_lsize;
+ uint idx, i;
+ uint32 m2; /* that is the clockcontrol_m2 */
+ } type3_table_t;
+ static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */
-+ { 150000000, 0x311, 0x4020005 },
-+// { 180000000, 0x, 0x }, /* later we may want this frequency */
-+ { 200000000, 0x311, 0x4020003 },
++ { 150000000, 0x311, 0x4020005 },
++ { 200000000, 0x311, 0x4020003 },
+ };
+ typedef struct {
+ uint32 mipsclock;
+ uint32 pci33;
+ uint32 m2;
+ uint32 m3;
-+ uint32 ratio;
++ uint32 ratio_cfg;
+ uint32 ratio_parm;
+ } n4m_table_t;
+
+ static n4m_table_t BCMINITDATA(type2_table)[] = {
-+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a00a9 },
-+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a00a9 },
-+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a00a9 },
-+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a00a9 },
-+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a00a9 },
-+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a00a9 },
-+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9 },
++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 },
++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9 },
++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555 },
++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 },
++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 },
++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 },
++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 },
++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 },
++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 },
++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 8, 0x012a00a9 },
++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 }
+ };
+
+ static n4m_table_t BCMINITDATA(type4_table)[] = {
-+ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
-+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
-+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
++ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
++ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 },
++ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
++ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, 0x012a00a9 },
++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, 0x254a14a9 },
++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, 0x0aaa0555 },
++ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, 0x02520129 },
++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 },
++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 },
++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 },
++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 },
++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 },
++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, 0x02520129 },
++ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 }
++ };
++
++ static n4m_table_t BCMINITDATA(type7_table)[] = {
++ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
++ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 },
++ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 },
++ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
++ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
++ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 },
++ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 },
++ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 },
++ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 }
+ };
++
+ ulong start, end, dst;
+ bool ret = FALSE;
-+
++
+ /* get index of the current core */
+ idx = sb_coreidx(sbh);
+ clockcontrol_m2 = NULL;
+ clockcontrol_n = &cc->clockcontrol_n;
+ clockcontrol_sb = &cc->clockcontrol_sb;
+ clockcontrol_pci = &cc->clockcontrol_pci;
-+ clockcontrol_m2 = &cc->clockcontrol_m2;
++ clockcontrol_m2 = &cc->clockcontrol_m2;
+ }
+ } else
+ goto done;
+ /* No PLL change */
+ orig_m2 = R_REG(&cc->clockcontrol_m2);
+ if ((orig_n == type3_table[i].n) &&
-+ (orig_m2 == type3_table[i].m2)) {
++ (orig_m2 == type3_table[i].m2)) {
+ goto done;
+ }
-+
++
+ /* Set the PLL controls */
+ W_REG(clockcontrol_n, type3_table[i].n);
+ W_REG(clockcontrol_m2, type3_table[i].m2);
+ while (1);
+ } else if ((pll_type == PLL_TYPE2) ||
+ (pll_type == PLL_TYPE4) ||
-+ (pll_type == PLL_TYPE6)) {
-+ n4m_table_t *table = NULL;
++ (pll_type == PLL_TYPE6) ||
++ (pll_type == PLL_TYPE7)) {
++ n4m_table_t *table = NULL, *te;
+ uint tabsz = 0;
+
+ ASSERT(cc);
+ goto end_fill;
+ }
+
-+ table = (pll_type == PLL_TYPE2) ? BCMINIT(type2_table) : BCMINIT(type4_table);
-+ tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(BCMINIT(type2_table)) :
-+ ARRAYSIZE(BCMINIT(type4_table));
++ if (pll_type == PLL_TYPE2) {
++ table = BCMINIT(type2_table);
++ tabsz = ARRAYSIZE(BCMINIT(type2_table));
++ } else if (pll_type == PLL_TYPE4) {
++ table = BCMINIT(type4_table);
++ tabsz = ARRAYSIZE(BCMINIT(type4_table));
++ } else if (pll_type == PLL_TYPE7) {
++ table = BCMINIT(type7_table);
++ tabsz = ARRAYSIZE(BCMINIT(type7_table));
++ } else
++ ASSERT("No table for plltype" == NULL);
+
+ /* Store the current clock register values */
+ orig_m2 = R_REG(&cc->clockcontrol_m2);
+ orig_ratio_parm = 0;
++ orig_ratio_cfg = 0;
+
+ /* Look up current ratio */
+ for (i = 0; i < tabsz; i++) {
+ (orig_m2 == table[i].m2) &&
+ (orig_mips == table[i].m3)) {
+ orig_ratio_parm = table[i].ratio_parm;
++ orig_ratio_cfg = table[i].ratio_cfg;
+ break;
+ }
+ }
+ ret = FALSE;
+ goto done;
+ } else {
++ te = &table[i];
+ ret = TRUE;
+ }
+
+ /* No PLL change */
-+ if ((orig_n == table[i].n) &&
-+ (orig_sb == table[i].sb) &&
-+ (orig_pci == table[i].pci33) &&
-+ (orig_m2 == table[i].m2) &&
-+ (orig_mips == table[i].m3))
++ if ((orig_n == te->n) &&
++ (orig_sb == te->sb) &&
++ (orig_pci == te->pci33) &&
++ (orig_m2 == te->m2) &&
++ (orig_mips == te->m3))
+ goto done;
+
+ /* Set the PLL controls */
-+ W_REG(clockcontrol_n, table[i].n);
-+ W_REG(clockcontrol_sb, table[i].sb);
-+ W_REG(clockcontrol_pci, table[i].pci33);
-+ W_REG(&cc->clockcontrol_m2, table[i].m2);
-+ W_REG(&cc->clockcontrol_mips, table[i].m3);
++ W_REG(clockcontrol_n, te->n);
++ W_REG(clockcontrol_sb, te->sb);
++ W_REG(clockcontrol_pci, te->pci33);
++ W_REG(&cc->clockcontrol_m2, te->m2);
++ W_REG(&cc->clockcontrol_mips, te->m3);
++
++ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */
++ if ((pll_type == PLL_TYPE7) &&
++ (te->sb != te->m2) &&
++ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000))
++ W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100);
+
+ /* No ratio change */
-+ if (orig_ratio_parm == table[i].ratio_parm)
++ if (orig_ratio_parm == te->ratio_parm)
+ goto end_fill;
+
-+ new_ratio = table[i].ratio_parm;
-+
+ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
+
+ /* Preload the code into the cache */
+ start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
+ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
+ while (start < end) {
-+ cache_unroll(start, Fill_I);
++ cache_op(start, Fill_I);
+ start += ic_lsize;
+ }
+
+ dst = KSEG1ADDR(0x180);
+ for (i = 0; i < (end - start); i += 4)
+ *((ulong *)(dst + i)) = *((ulong *)(start + i));
-+
++
+ /* Preload handler into the cache one line at a time */
+ for (i = 0; i < (end - start); i += 4)
-+ cache_unroll(dst + i, Fill_I);
++ cache_op(dst + i, Fill_I);
+
+ /* Clear BEV bit */
+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
+
+ start_fill:
+ /* step 1, set clock ratios */
-+ MTC0(C0_BROADCOM, 3, new_ratio);
-+ MTC0(C0_BROADCOM, 1, 8);
++ MTC0(C0_BROADCOM, 3, te->ratio_parm);
++ MTC0(C0_BROADCOM, 1, te->ratio_cfg);
+
+ /* step 2: program timer intr */
+ W_REG(&mipsr->timer, 100);
+ MTC0(C0_BROADCOM, 2, 0x9);
+
+
-+ /* steps 5 & 6 */
++ /* steps 5 & 6 */
+ __asm__ __volatile__ (
+ ".set\tmips3\n\t"
+ "wait\n\t"
+
+ /* step 7, clear cfg_active */
+ MTC0(C0_BROADCOM, 2, 0);
-+
++
+ /* Additional Step: set back to orig sync mode */
+ MTC0(C0_BROADCOM, 4, sync_mode);
+
+ return ret;
+}
+
++/*
++ * This also must be run from the cache on 47xx
++ * so there are no mips core BIU ops in progress
++ * when the PFC is enabled.
++ */
++
++static void
++BCMINITFN(_enable_pfc)(uint32 mode)
++{
++ /* write range */
++ *(volatile uint32 *)PFC_CR1 = 0xffff0000;
++
++ /* enable */
++ *(volatile uint32 *)PFC_CR0 = mode;
++}
++
++void
++BCMINITFN(enable_pfc)(uint32 mode)
++{
++ ulong start, end;
++ int i;
++
++ /* If auto then choose the correct mode for this
++ platform, currently we only ever select one mode */
++ if (mode == PFC_AUTO)
++ mode = PFC_INST;
++
++ /* enable prefetch cache if available */
++ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) {
++ start = (ulong) &BCMINIT(_enable_pfc);
++ end = (ulong) &BCMINIT(enable_pfc);
++
++ /* Preload handler into the cache one line at a time */
++ for (i = 0; i < (end - start); i += 4)
++ cache_op(start + i, Fill_I);
++
++ BCMINIT(_enable_pfc)(mode);
++ }
++}
+
+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
+uint32
-+BCMINITFN(sb_memc_get_ncdl)(void *sbh)
++BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh)
+{
+ sbmemcregs_t *memc;
+ uint32 ret = 0;
+ dqsg = R_REG(&memc->dqsgatencdl);
+
+ rd &= MEMC_RDNCDLCOR_RD_MASK;
-+ wr &= MEMC_WRNCDLCOR_WR_MASK;
++ wr &= MEMC_WRNCDLCOR_WR_MASK;
+ dqsg &= MEMC_DQSGATENCDL_G_MASK;
+
+ if (config & MEMC_CONFIG_DDR) {
+ ret = (wr << 16) | (rd << 8) | dqsg;
+ } else {
-+ if ( (rev > 0) || (sb_chip(sbh) == BCM5365_DEVICE_ID))
-+
++ if (rev > 0)
+ cd = rd;
+ else
+ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
+ return ret;
+}
+
-+/* returns the PFC values to be used based on the chip ID*/
-+
-+uint32
-+BCMINITFN(sb_mips_get_pfc)(void *sbh)
-+{
-+ if (BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID)
-+ return 0x11;
-+ else
-+ return 0x15;
-+}
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/sbpci.c linux-2.4.30-brcm/arch/mips/bcm947xx/sbpci.c
---- linux-2.4.30/arch/mips/bcm947xx/sbpci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/sbpci.c 2005-05-26 21:56:08.000000000 +0200
-@@ -0,0 +1,569 @@
+diff -urN linux.old/arch/mips/bcm947xx/sbpci.c linux.dev/arch/mips/bcm947xx/sbpci.c
+--- linux.old/arch/mips/bcm947xx/sbpci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sbpci.c 2005-11-07 23:53:20.981131500 +0100
+@@ -0,0 +1,588 @@
+/*
+ * Low-Level PCI and SB support for BCM47xx
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <pcicfg.h>
+#include <bcmdevs.h>
+#include <sbconfig.h>
-+#include <sbpci.h>
+#include <osl.h>
++#include <sbutils.h>
++#include <sbpci.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
-+#include <sbutils.h>
+#include <bcmnvram.h>
+#include <hndmips.h>
+
+#define PCI_SLOT_MAX 16
+
+static uint32
-+config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
++config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off)
+{
+ uint coreidx;
+ sbpciregs_t *regs;
+}
+
+static int
-+extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+ uint32 addr, *reg = NULL, val;
+ int ret = 0;
+}
+
+static int
-+extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+ uint32 addr, *reg = NULL, val;
+ int ret = 0;
+ */
+
+static int
-+sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+ pci_config_regs *cfg;
+
+}
+
+static int
-+sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+ uint coreidx, n;
+ void *regs;
+}
+
+int
-+sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+ if (bus == 0)
+ return sb_read_config(sbh, bus, dev, func, off, buf, len);
+}
+
+int
-+sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
+ if (bus == 0)
+ return sb_write_config(sbh, bus, dev, func, off, buf, len);
+ pci_ban[pci_banned++] = core;
+}
+
-+int __init
-+sbpci_init(void *sbh)
++static int
++sbpci_init_pci(sb_t *sbh)
+{
-+ uint chip, chiprev, chippkg, coreidx, host, i;
++ uint chip, chiprev, chippkg, host;
+ uint32 boardflags;
+ sbpciregs_t *pci;
+ sbconfig_t *sb;
-+ pci_config_regs *cfg;
-+ void *regs;
-+ char varname[8];
-+ int CT4712_WR;
-+ uint wlidx = 0;
-+ uint16 vendor, core;
-+ uint8 class, subclass, progif;
+ uint32 val;
-+ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
-+ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
+
+ chip = sb_chip(sbh);
+ chiprev = sb_chiprev(sbh);
+ chippkg = sb_chippkg(sbh);
-+ coreidx = sb_coreidx(sbh);
+
-+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) {
++ printf("PCI: no core\n");
++ pci_disabled = TRUE;
+ return -1;
++ }
+ sb_core_reset(sbh, 0);
+
-+ /* In some board,
-+ if(nvram_match("boardtype", "bcm94710dev"))
-+ CT4712_WR = 0;
-+ else
-+ CT4712_WR = 1;
-+ */
-+
+ boardflags = (uint32) getintvar(NULL, "boardflags");
+
+ if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0))
+ */
+ if (((chip == BCM4712_DEVICE_ID) &&
+ ((chippkg == BCM4712SMALL_PKG_ID) ||
-+ (chippkg == BCM4712MID_PKG_ID))) )
++ (chippkg == BCM4712MID_PKG_ID))) ||
++ (boardflags & BFL_NOPCI))
+ pci_disabled = TRUE;
+
+ /*
+ if (cardbus) {
+ printf("PCI: Enabling CardBus\n");
+ /* GPIO 1 resets the CardBus device on bcm94710ap */
-+ sb_gpioout(sbh, 1, 1);
-+ sb_gpioouten(sbh, 1, 1);
++ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
++ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
+ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
+ }
+
+ /* Enable PCI interrupts */
+ W_REG(&pci->intmask, PCI_INTA);
+ }
++
++ return 0;
++}
+
-+ /* Scan the SB bus */
-+ bzero(sb_config_regs, sizeof(sb_config_regs));
-+ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
-+ cfg->vendor = 0xffff;
-+ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
-+ continue;
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++static int
++sbpci_init_cores(sb_t *sbh)
++{
++ uint chip, chiprev, chippkg, coreidx, i;
++ sbconfig_t *sb;
++ pci_config_regs *cfg;
++ void *regs;
++ char varname[8];
++ uint wlidx = 0;
++ uint16 vendor, core;
++ uint8 class, subclass, progif;
++ uint32 val;
++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
++
++ chip = sb_chip(sbh);
++ chiprev = sb_chiprev(sbh);
++ chippkg = sb_chippkg(sbh);
++ coreidx = sb_coreidx(sbh);
++
++ /* Scan the SB bus */
++ bzero(sb_config_regs, sizeof(sb_config_regs));
++ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
++ cfg->vendor = 0xffff;
++ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
++ continue;
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
+ /* Read ID register and parse vendor and core */
+ val = R_REG(&sb->sbidhigh);
+ return 0;
+}
+
++int __init
++sbpci_init(sb_t *sbh)
++{
++ sbpci_init_pci(sbh);
++ sbpci_init_cores(sbh);
++ return 0;
++}
++
+void
-+sbpci_check(void *sbh)
++sbpci_check(sb_t *sbh)
+{
+ uint coreidx;
+ sbpciregs_t *pci;
+
+ sb_setcoreidx(sbh, coreidx);
+}
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/setup.c linux-2.4.30-brcm/arch/mips/bcm947xx/setup.c
---- linux-2.4.30/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/setup.c 2005-05-25 17:50:08.000000000 +0200
-@@ -0,0 +1,261 @@
++
+diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
+--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/setup.c 2005-11-08 00:11:55.346775000 +0100
+@@ -0,0 +1,272 @@
+/*
+ * Generic setup routines for Broadcom MIPS boards
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * $Id: setup.c,v 1.2 2005/04/02 12:12:57 wbx Exp $
++ * $Id$
+ */
+
+#include <linux/config.h>
+#include <linux/serialP.h>
+#include <linux/ide.h>
+#include <asm/bootinfo.h>
++#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+
+#endif
+
+#include <typedefs.h>
++#include <osl.h>
++#include <sbutils.h>
+#include <bcmutils.h>
+#include <bcmnvram.h>
+#include <sbmips.h>
-+#include <sbutils.h>
+#include <trxhdr.h>
+
+extern void bcm947xx_time_init(void);
+extern void bcm947xx_timer_setup(struct irqaction *irq);
-+extern void check_enable_mips_pfc(int val);
+
+#ifdef CONFIG_REMOTE_DEBUG
+extern void set_debug_traps(void);
+#endif
+
+/* Global SB handle */
-+void *bcm947xx_sbh = NULL;
++sb_t *bcm947xx_sbh = NULL;
+spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED;
+EXPORT_SYMBOL(bcm947xx_sbh);
+EXPORT_SYMBOL(bcm947xx_sbh_lock);
+}
+
+static void __init
-+serial_setup(void *sbh)
++serial_setup(sb_t *sbh)
+{
+ sb_serial_init(sbh, serial_add);
+
+brcm_setup(void)
+{
+ char *value;
-+ uint pfc_val;
+
+ /* Get global SB handle */
+ sbh = sb_kattach();
+ /* Initialize clocks and interrupts */
+ sb_mips_init(sbh);
+
-+ /*
-+ * Now that the sbh is inited set the proper PFC value
-+ */
-+ pfc_val = sb_mips_get_pfc(sbh);
-+ printk("Setting the PFC value as 0x%x\n", pfc_val);
-+ check_enable_mips_pfc(pfc_val);
++ if (BCM330X(current_cpu_data.processor_id) &&
++ (read_c0_diag() & BRCM_PFC_AVAIL)) {
++ /*
++ * Now that the sbh is inited set the proper PFC value
++ */
++ printk("Setting the PFC to its default value\n");
++ enable_pfc(PFC_AUTO);
++ }
++
+
+#ifdef CONFIG_SERIAL
+ /* Initialize UARTs */
+#endif
+
+ /* Override default command line arguments */
-+ value = nvram_get("kernel_args");
++ value = nvram_get("kernel_cmdline");
+ if (value && strlen(value) && strncmp(value, "empty", 5))
+ strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
+
+const char *
+get_system_type(void)
+{
-+ return "Broadcom BCM947XX";
++ static char s[32];
++
++ if (bcm947xx_sbh) {
++ sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh),
++ sb_chiprev(bcm947xx_sbh));
++ return s;
++ }
++ else
++ return "Broadcom BCM947XX";
+}
+
+void __init
+EXPORT_SYMBOL(init_mtd_partitions);
+
+#endif
-diff -Nur linux-2.4.30/arch/mips/bcm947xx/time.c linux-2.4.30-brcm/arch/mips/bcm947xx/time.c
---- linux-2.4.30/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/bcm947xx/time.c 2005-05-22 22:55:51.000000000 +0200
-@@ -0,0 +1,117 @@
+diff -urN linux.old/arch/mips/bcm947xx/sflash.c linux.dev/arch/mips/bcm947xx/sflash.c
+--- linux.old/arch/mips/bcm947xx/sflash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/sflash.c 2005-11-08 00:54:43.022739000 +0100
+@@ -0,0 +1,418 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
++
++#include <osl.h>
++#include <typedefs.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <mipsinc.h>
++#include <bcmutils.h>
++#include <bcmdevs.h>
++#include <sflash.h>
++
++/* Private global state */
++static struct sflash sflash;
++
++/* Issue a serial flash command */
++static INLINE void
++sflash_cmd(chipcregs_t *cc, uint opcode)
++{
++ W_REG(&cc->flashcontrol, SFLASH_START | opcode);
++ while (R_REG(&cc->flashcontrol) & SFLASH_BUSY);
++}
++
++/* Initialize serial flash access */
++struct sflash *
++sflash_init(chipcregs_t *cc)
++{
++ uint32 id, id2;
++
++ bzero(&sflash, sizeof(sflash));
++
++ sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK;
++
++ switch (sflash.type) {
++ case SFLASH_ST:
++ /* Probe for ST chips */
++ sflash_cmd(cc, SFLASH_ST_DP);
++ sflash_cmd(cc, SFLASH_ST_RES);
++ id = R_REG(&cc->flashdata);
++ switch (id) {
++ case 0x11:
++ /* ST M25P20 2 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 4;
++ break;
++ case 0x12:
++ /* ST M25P40 4 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 8;
++ break;
++ case 0x13:
++ /* ST M25P80 8 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 16;
++ break;
++ case 0x14:
++ /* ST M25P16 16 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 32;
++ break;
++ case 0x15:
++ /* ST M25P32 32 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 64;
++ break;
++ case 0xbf:
++ W_REG(&cc->flashaddress, 1);
++ sflash_cmd(cc, SFLASH_ST_RES);
++ id2 = R_REG(&cc->flashdata);
++ if (id2 == 0x44) {
++ /* SST M25VF80 4 Mbit Serial Flash */
++ sflash.blocksize = 64 * 1024;
++ sflash.numblocks = 8;
++ }
++ break;
++ }
++ break;
++
++ case SFLASH_AT:
++ /* Probe for Atmel chips */
++ sflash_cmd(cc, SFLASH_AT_STATUS);
++ id = R_REG(&cc->flashdata) & 0x3c;
++ switch (id) {
++ case 0xc:
++ /* Atmel AT45DB011 1Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 512;
++ break;
++ case 0x14:
++ /* Atmel AT45DB021 2Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 1024;
++ break;
++ case 0x1c:
++ /* Atmel AT45DB041 4Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 2048;
++ break;
++ case 0x24:
++ /* Atmel AT45DB081 8Mbit Serial Flash */
++ sflash.blocksize = 256;
++ sflash.numblocks = 4096;
++ break;
++ case 0x2c:
++ /* Atmel AT45DB161 16Mbit Serial Flash */
++ sflash.blocksize = 512;
++ sflash.numblocks = 4096;
++ break;
++ case 0x34:
++ /* Atmel AT45DB321 32Mbit Serial Flash */
++ sflash.blocksize = 512;
++ sflash.numblocks = 8192;
++ break;
++ case 0x3c:
++ /* Atmel AT45DB642 64Mbit Serial Flash */
++ sflash.blocksize = 1024;
++ sflash.numblocks = 8192;
++ break;
++ }
++ break;
++ }
++
++ sflash.size = sflash.blocksize * sflash.numblocks;
++ return sflash.size ? &sflash : NULL;
++}
++
++/* Read len bytes starting at offset into buf. Returns number of bytes read. */
++int
++sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf)
++{
++ int cnt;
++ uint32 *from, *to;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > sflash.size)
++ return -22;
++
++ if ((len >= 4) && (offset & 3))
++ cnt = 4 - (offset & 3);
++ else if ((len >= 4) && ((uint32)buf & 3))
++ cnt = 4 - ((uint32)buf & 3);
++ else
++ cnt = len;
++
++ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset);
++ to = (uint32 *)buf;
++
++ if (cnt < 4) {
++ bcopy(from, to, cnt);
++ return cnt;
++ }
++
++ while (cnt >= 4) {
++ *to++ = *from++;
++ cnt -= 4;
++ }
++
++ return (len - cnt);
++}
++
++/* Poll for command completion. Returns zero when complete. */
++int
++sflash_poll(chipcregs_t *cc, uint offset)
++{
++ if (offset >= sflash.size)
++ return -22;
++
++ switch (sflash.type) {
++ case SFLASH_ST:
++ /* Check for ST Write In Progress bit */
++ sflash_cmd(cc, SFLASH_ST_RDSR);
++ return R_REG(&cc->flashdata) & SFLASH_ST_WIP;
++ case SFLASH_AT:
++ /* Check for Atmel Ready bit */
++ sflash_cmd(cc, SFLASH_AT_STATUS);
++ return !(R_REG(&cc->flashdata) & SFLASH_AT_READY);
++ }
++
++ return 0;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++int
++sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
++{
++ struct sflash *sfl;
++ int ret = 0;
++ bool is4712b0;
++ uint32 page, byte, mask;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > sflash.size)
++ return -22;
++
++ sfl = &sflash;
++ switch (sfl->type) {
++ case SFLASH_ST:
++ mask = R_REG(&cc->chipid);
++ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) &&
++ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT)));
++ /* Enable writes */
++ sflash_cmd(cc, SFLASH_ST_WREN);
++ if (is4712b0) {
++ mask = 1 << 14;
++ W_REG(&cc->flashaddress, offset);
++ W_REG(&cc->flashdata, *buf++);
++ /* Set chip select */
++ OR_REG(&cc->gpioout, mask);
++ /* Issue a page program with the first byte */
++ sflash_cmd(cc, SFLASH_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, drop cs and return */
++ AND_REG(&cc->gpioout, ~mask);
++ if (!sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -11;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ sflash_cmd(cc, *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs if needed */
++ if ((offset & 255) != 1) {
++ /* Drop cs */
++ AND_REG(&cc->gpioout, ~mask);
++ if (!sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -12;
++ }
++ }
++ } else {
++ ret = 1;
++ W_REG(&cc->flashaddress, offset);
++ W_REG(&cc->flashdata, *buf);
++ /* Page program */
++ sflash_cmd(cc, SFLASH_ST_PP);
++ }
++ break;
++ case SFLASH_AT:
++ mask = sfl->blocksize - 1;
++ page = (offset & ~mask) << 1;
++ byte = offset & mask;
++ /* Read main memory page into buffer 1 */
++ if (byte || len < sfl->blocksize) {
++ W_REG(&cc->flashaddress, page);
++ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD);
++ /* 250 us for AT45DB321B */
++ SPINWAIT(sflash_poll(cc, offset), 1000);
++ ASSERT(!sflash_poll(cc, offset));
++ }
++ /* Write into buffer 1 */
++ for (ret = 0; ret < len && byte < sfl->blocksize; ret++) {
++ W_REG(&cc->flashaddress, byte++);
++ W_REG(&cc->flashdata, *buf++);
++ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE);
++ }
++ /* Write buffer 1 into main memory page */
++ W_REG(&cc->flashaddress, page);
++ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM);
++ break;
++ }
++
++ return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++int
++sflash_erase(chipcregs_t *cc, uint offset)
++{
++ struct sflash *sfl;
++
++ if (offset >= sflash.size)
++ return -22;
++
++ sfl = &sflash;
++ switch (sfl->type) {
++ case SFLASH_ST:
++ sflash_cmd(cc, SFLASH_ST_WREN);
++ W_REG(&cc->flashaddress, offset);
++ sflash_cmd(cc, SFLASH_ST_SE);
++ return sfl->blocksize;
++ case SFLASH_AT:
++ W_REG(&cc->flashaddress, offset << 1);
++ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE);
++ return sfl->blocksize;
++ }
++
++ return 0;
++}
++
++/*
++ * writes the appropriate range of flash, a NULL buf simply erases
++ * the region of flash
++ */
++int
++sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf)
++{
++ struct sflash *sfl;
++ uchar *block = NULL, *cur_ptr, *blk_ptr;
++ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
++ uint blk_offset, blk_len, copied;
++ int bytes, ret = 0;
++
++ /* Check address range */
++ if (len <= 0)
++ return 0;
++
++ sfl = &sflash;
++ if ((offset + len) > sfl->size)
++ return -1;
++
++ blocksize = sfl->blocksize;
++ mask = blocksize - 1;
++
++ /* Allocate a block of mem */
++ if (!(block = MALLOC(NULL, blocksize)))
++ return -1;
++
++ while (len) {
++ /* Align offset */
++ cur_offset = offset & ~mask;
++ cur_length = blocksize;
++ cur_ptr = block;
++
++ remainder = blocksize - (offset & mask);
++ if (len < remainder)
++ cur_retlen = len;
++ else
++ cur_retlen = remainder;
++
++ /* buf == NULL means erase only */
++ if (buf) {
++ /* Copy existing data into holding block if necessary */
++ if ((offset & mask) || (len < blocksize)) {
++ blk_offset = cur_offset;
++ blk_len = cur_length;
++ blk_ptr = cur_ptr;
++
++ /* Copy entire block */
++ while(blk_len) {
++ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr);
++ blk_offset += copied;
++ blk_len -= copied;
++ blk_ptr += copied;
++ }
++ }
++
++ /* Copy input data into holding block */
++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
++ }
++
++ /* Erase block */
++ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0)
++ goto done;
++ while (sflash_poll(cc, (uint) cur_offset));
++
++ /* buf == NULL means erase only */
++ if (!buf) {
++ offset += cur_retlen;
++ len -= cur_retlen;
++ continue;
++ }
++
++ /* Write holding block */
++ while (cur_length > 0) {
++ if ((bytes = sflash_write(cc,
++ (uint) cur_offset,
++ (uint) cur_length,
++ (uchar *) cur_ptr)) < 0) {
++ ret = bytes;
++ goto done;
++ }
++ while (sflash_poll(cc, (uint) cur_offset));
++ cur_offset += bytes;
++ cur_length -= bytes;
++ cur_ptr += bytes;
++ }
++
++ offset += cur_retlen;
++ len -= cur_retlen;
++ buf += cur_retlen;
++ }
++
++ ret = len;
++done:
++ if (block)
++ MFREE(NULL, block, blocksize);
++ return ret;
++}
++
+diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
+--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm947xx/time.c 2005-11-07 23:47:27.528101500 +0100
+@@ -0,0 +1,118 @@
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+#include <asm/time.h>
+
+#include <typedefs.h>
++#include <osl.h>
++#include <sbutils.h>
+#include <bcmnvram.h>
+#include <sbconfig.h>
+#include <sbextif.h>
-+#include <sbutils.h>
+#include <sbmips.h>
+
+/* Global SB handle */
+ /* Enable the timer interrupt */
+ setup_irq(7, &bcm947xx_timer_irqaction);
+}
-diff -Nur linux-2.4.30/arch/mips/config-shared.in linux-2.4.30-brcm/arch/mips/config-shared.in
---- linux-2.4.30/arch/mips/config-shared.in 2005-01-19 15:09:27.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/config-shared.in 2005-05-26 16:34:10.000000000 +0200
-@@ -205,6 +205,14 @@
+diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
+--- linux.old/arch/mips/config-shared.in 2005-11-07 23:12:50.850903750 +0100
++++ linux.dev/arch/mips/config-shared.in 2005-11-07 21:57:07.889588500 +0100
+@@ -208,6 +208,14 @@
fi
define_bool CONFIG_MIPS_RTC y
fi
bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229
-@@ -226,6 +234,11 @@
+@@ -229,6 +237,11 @@
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
#
# Select some configuration options automatically based on user selections.
#
if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
-@@ -533,6 +546,13 @@
+@@ -554,6 +567,13 @@
define_bool CONFIG_SWAP_IO_SPACE_L y
define_bool CONFIG_BOOT_ELF32 y
fi
if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
define_bool CONFIG_ARC32 y
define_bool CONFIG_ARC_MEMORY y
-@@ -1011,7 +1031,11 @@
+@@ -1042,7 +1062,11 @@
bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
if [ "$CONFIG_KGDB" = "y" ]; then
define_bool CONFIG_DEBUG_INFO y
-diff -Nur linux-2.4.30/arch/mips/kernel/cpu-probe.c linux-2.4.30-brcm/arch/mips/kernel/cpu-probe.c
---- linux-2.4.30/arch/mips/kernel/cpu-probe.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/kernel/cpu-probe.c 2005-05-22 22:55:51.000000000 +0200
-@@ -174,7 +174,7 @@
+diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
+--- linux.old/arch/mips/kernel/cpu-probe.c 2005-11-07 23:12:50.890906250 +0100
++++ linux.dev/arch/mips/kernel/cpu-probe.c 2005-11-07 21:57:07.893588750 +0100
+@@ -163,7 +163,7 @@
static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
{
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
c->isa_level = MIPS_CPU_ISA_I;
-@@ -184,7 +184,7 @@
+@@ -173,7 +173,7 @@
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
if (cpu_has_confreg())
c->cputype = CPU_R3081E;
else
-@@ -199,12 +199,12 @@
+@@ -188,12 +188,12 @@
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
c->cputype = CPU_R4400SC;
else
c->cputype = CPU_R4000SC;
-@@ -450,7 +450,7 @@
+@@ -439,7 +439,7 @@
static inline void cpu_probe_mips(struct cpuinfo_mips *c)
{
decode_config1(c);
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
c->isa_level = MIPS_CPU_ISA_M32;
-@@ -491,10 +491,10 @@
+@@ -480,10 +480,10 @@
{
decode_config1(c);
c->options |= MIPS_CPU_PREFETCH;
case 0:
c->cputype = CPU_AU1000;
break;
-@@ -522,10 +522,34 @@
+@@ -511,10 +511,34 @@
}
}
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
c->isa_level = MIPS_CPU_ISA_M64;
-@@ -547,7 +571,7 @@
+@@ -536,7 +560,7 @@
static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
{
decode_config1(c);
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
c->isa_level = MIPS_CPU_ISA_M64;
-@@ -572,7 +596,7 @@
+@@ -561,7 +585,7 @@
c->cputype = CPU_UNKNOWN;
c->processor_id = read_c0_prid();
case PRID_COMP_LEGACY:
cpu_probe_legacy(c);
-@@ -583,6 +607,9 @@
+@@ -572,6 +596,9 @@
case PRID_COMP_ALCHEMY:
cpu_probe_alchemy(c);
break;
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c);
break;
-diff -Nur linux-2.4.30/arch/mips/kernel/head.S linux-2.4.30-brcm/arch/mips/kernel/head.S
---- linux-2.4.30/arch/mips/kernel/head.S 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/kernel/head.S 2005-05-22 22:55:51.000000000 +0200
+diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S 2005-11-07 23:12:50.898906750 +0100
++++ linux.dev/arch/mips/kernel/head.S 2005-11-07 21:57:07.893588750 +0100
@@ -28,12 +28,20 @@
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
/* The following two symbols are used for kernel profiling. */
EXPORT(stext)
-diff -Nur linux-2.4.30/arch/mips/kernel/proc.c linux-2.4.30-brcm/arch/mips/kernel/proc.c
---- linux-2.4.30/arch/mips/kernel/proc.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/kernel/proc.c 2005-05-22 22:55:51.000000000 +0200
+diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
+--- linux.old/arch/mips/kernel/proc.c 2005-11-07 23:12:50.906907250 +0100
++++ linux.dev/arch/mips/kernel/proc.c 2005-11-07 21:57:07.893588750 +0100
@@ -78,9 +78,10 @@
[CPU_AU1550] "Au1550",
[CPU_24K] "MIPS 24K",
static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned int version = current_cpu_data.processor_id;
-diff -Nur linux-2.4.30/arch/mips/kernel/setup.c linux-2.4.30-brcm/arch/mips/kernel/setup.c
---- linux-2.4.30/arch/mips/kernel/setup.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/kernel/setup.c 2005-05-25 19:00:43.000000000 +0200
-@@ -495,6 +495,7 @@
+diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
+--- linux.old/arch/mips/kernel/setup.c 2005-11-07 23:12:50.906907250 +0100
++++ linux.dev/arch/mips/kernel/setup.c 2005-11-07 21:57:07.893588750 +0100
+@@ -493,6 +493,7 @@
void swarm_setup(void);
void hp_setup(void);
void au1x00_setup(void);
void frame_info_init(void);
frame_info_init();
-@@ -693,6 +694,11 @@
+@@ -691,6 +692,11 @@
pmc_yosemite_setup();
break;
#endif
default:
panic("Unsupported architecture");
}
-diff -Nur linux-2.4.30/arch/mips/kernel/traps.c linux-2.4.30-brcm/arch/mips/kernel/traps.c
---- linux-2.4.30/arch/mips/kernel/traps.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/kernel/traps.c 2005-05-22 22:55:51.000000000 +0200
-@@ -913,6 +913,7 @@
+diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
+--- linux.old/arch/mips/kernel/traps.c 2005-11-07 23:12:50.922908250 +0100
++++ linux.dev/arch/mips/kernel/traps.c 2005-11-07 21:57:07.893588750 +0100
+@@ -920,6 +920,7 @@
void __init trap_init(void)
{
extern char except_vec1_generic;
extern char except_vec3_generic, except_vec3_r4000;
extern char except_vec_ejtag_debug;
extern char except_vec4;
-@@ -922,6 +923,7 @@
+@@ -927,6 +928,7 @@
/* Copy the generic exception handler code to it's final destination. */
memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
/*
* Setup default vectors
-@@ -980,6 +982,12 @@
+@@ -985,6 +987,12 @@
set_except_vector(13, handle_tr);
set_except_vector(22, handle_mdmx);
if (cpu_has_fpu && !cpu_has_nofpuex)
set_except_vector(15, handle_fpe);
-diff -Nur linux-2.4.30/arch/mips/Makefile linux-2.4.30-brcm/arch/mips/Makefile
---- linux-2.4.30/arch/mips/Makefile 2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/Makefile 2005-05-25 18:53:09.000000000 +0200
-@@ -46,10 +46,10 @@
- GCCFLAGS := -I $(TOPDIR)/include/asm/gcc
- GCCFLAGS += -G 0 -mno-abicalls -fno-pic -pipe
- GCCFLAGS += $(call check_gcc, -finline-limit=100000,)
--LINKFLAGS += -G 0 -static -n
--MODFLAGS += -mlong-calls
-+LINKFLAGS += -G 0 -static -n -nostdlib
-+MODFLAGS += -mlong-calls -fno-common
-
--ifdef CONFIG_DEBUG_INFO
-+ifdef CONFIG_REMOTE_DEBUG
- GCCFLAGS += -g
- ifdef CONFIG_SB1XXX_CORELIS
- GCCFLAGS += -mno-sched-prolog -fno-omit-frame-pointer
-@@ -71,13 +71,13 @@
- set_gccflags = $(shell \
- while :; do \
- cpu=$(1); isa=-$(2); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march= -mtune=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- cpu=$(3); isa=-$(4); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march= -mtune=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
-@@ -92,7 +92,7 @@
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
-- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+ for gas_opt in -Wa,-march= -Wa,-mtune=; do \
- $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- break 2; \
-@@ -174,6 +174,7 @@
- endif
-
- AFLAGS += $(GCCFLAGS)
-+ASFLAGS += $(GCCFLAGS)
- CFLAGS += $(GCCFLAGS)
-
- LD += -m $(ld-emul)
-@@ -715,6 +716,19 @@
- endif
-
- #
-+# Broadcom BCM947XX variants
-+#
-+ifdef CONFIG_BCM947XX
-+LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o
-+SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx
-+LOADADDR := 0x80001000
-+
-+zImage: vmlinux
-+ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
-+export LOADADDR
-+endif
-+
-+#
- # Choosing incompatible machines durings configuration will result in
- # error messages during linking. Select a default linkscript if
- # none has been choosen above.
-@@ -767,6 +781,7 @@
- $(MAKE) -C arch/$(ARCH)/tools clean
- $(MAKE) -C arch/mips/baget clean
- $(MAKE) -C arch/mips/lasat clean
-+ $(MAKE) -C arch/mips/bcm947xx/compressed clean
-
- archmrproper:
- @$(MAKEBOOT) mrproper
-diff -Nur linux-2.4.30/arch/mips/mm/c-r4k.c linux-2.4.30-brcm/arch/mips/mm/c-r4k.c
---- linux-2.4.30/arch/mips/mm/c-r4k.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/mm/c-r4k.c 2005-05-26 08:53:48.000000000 +0200
-@@ -1114,3 +1114,47 @@
- build_clear_page();
- build_copy_page();
- }
+diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
+--- linux.old/arch/mips/mm/c-r4k.c 2005-11-07 23:12:50.954910250 +0100
++++ linux.dev/arch/mips/mm/c-r4k.c 2005-11-07 21:57:08.157605250 +0100
+@@ -1166,3 +1166,47 @@
+ build_clear_page();
+ build_copy_page();
+ }
+
+#ifdef CONFIG_BCM4704
+static void __init mips32_icache_fill(unsigned long addr, uint nbytes)
+}
+
+
-diff -Nur linux-2.4.30/arch/mips/pci/Makefile linux-2.4.30-brcm/arch/mips/pci/Makefile
---- linux-2.4.30/arch/mips/pci/Makefile 2005-01-19 15:09:29.000000000 +0100
-+++ linux-2.4.30-brcm/arch/mips/pci/Makefile 2005-05-26 01:02:53.000000000 +0200
+diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
+--- linux.old/arch/mips/pci/Makefile 2005-11-07 23:12:50.978911750 +0100
++++ linux.dev/arch/mips/pci/Makefile 2005-11-07 21:57:07.897589000 +0100
@@ -13,7 +13,9 @@
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_PCI_AUTO) += pci_auto.o
include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.30/drivers/char/serial.c linux-2.4.30-brcm/drivers/char/serial.c
---- linux-2.4.30/drivers/char/serial.c 2005-01-19 15:09:50.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/char/serial.c 2005-05-22 22:55:52.000000000 +0200
-@@ -422,6 +422,10 @@
+diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
+--- linux.old/drivers/char/serial.c 2005-11-07 23:12:51.038915500 +0100
++++ linux.dev/drivers/char/serial.c 2005-11-07 21:57:07.901589250 +0100
+@@ -444,6 +444,10 @@
return inb(info->port+1);
#endif
case SERIAL_IO_MEM:
return readb((unsigned long) info->iomem_base +
(offset<<info->iomem_reg_shift));
default:
-@@ -442,6 +446,9 @@
+@@ -464,6 +468,9 @@
case SERIAL_IO_MEM:
writeb(value, (unsigned long) info->iomem_base +
(offset<<info->iomem_reg_shift));
break;
default:
outb(value, info->port+offset);
-@@ -5972,6 +5979,13 @@
+@@ -1728,7 +1735,7 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
+- quot = baud_base / baud;
++ quot = (baud_base + (baud / 2)) / baud;
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+@@ -1745,12 +1752,12 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
+- quot = baud_base / baud;
++ quot = (baud_base + (baud / 2)) / baud;
+ }
+ }
+ /* As a last resort, if the quotient is zero, default to 9600 bps */
+ if (!quot)
+- quot = baud_base / 9600;
++ quot = (baud_base + 4800) / 9600;
+ /*
+ * Work around a bug in the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+@@ -5984,6 +5991,13 @@
* Divisor, bytesize and parity
*/
state = rs_table + co->index;
if (doflow)
state->flags |= ASYNC_CONS_FLOW;
info = &async_sercons;
-diff -Nur linux-2.4.30/drivers/mtd/maps/bcm947xx-flash.c linux-2.4.30-brcm/drivers/mtd/maps/bcm947xx-flash.c
---- linux-2.4.30/drivers/mtd/maps/bcm947xx-flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/mtd/maps/bcm947xx-flash.c 2005-05-22 22:55:52.000000000 +0200
-@@ -0,0 +1,236 @@
+@@ -5997,7 +6011,7 @@
+ info->io_type = state->io_type;
+ info->iomem_base = state->iomem_base;
+ info->iomem_reg_shift = state->iomem_reg_shift;
+- quot = state->baud_base / baud;
++ quot = (state->baud_base + (baud / 2)) / baud;
+ cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ cval >>= 8;
+diff -urN linux.old/drivers/mtd/maps/Config.in linux.dev/drivers/mtd/maps/Config.in
+--- linux.old/drivers/mtd/maps/Config.in 2005-11-07 23:12:51.086918500 +0100
++++ linux.dev/drivers/mtd/maps/Config.in 2005-11-07 21:57:07.901589250 +0100
+@@ -48,6 +48,7 @@
+ fi
+
+ if [ "$CONFIG_MIPS" = "y" ]; then
++ dep_tristate ' CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
+ dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
+ dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
+ dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
+diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
+--- linux.old/drivers/mtd/maps/Makefile 2005-11-07 23:12:51.086918500 +0100
++++ linux.dev/drivers/mtd/maps/Makefile 2005-11-07 21:57:07.905589500 +0100
+@@ -3,6 +3,8 @@
+ #
+ # $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $
+
++EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
++
+ BELOW25 := $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/)
+
+ ifeq ($(BELOW25),y)
+@@ -10,6 +12,7 @@
+ endif
+
+ # Chip mappings
++obj-$(CONFIG_MTD_BCM947XX) += bcm947xx-flash.o
+ obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
+ obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
+ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
+diff -urN linux.old/drivers/mtd/maps/bcm947xx-flash.c linux.dev/drivers/mtd/maps/bcm947xx-flash.c
+--- linux.old/drivers/mtd/maps/bcm947xx-flash.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/mtd/maps/bcm947xx-flash.c 2005-11-07 23:33:20.715765500 +0100
+@@ -0,0 +1,237 @@
+/*
+ * Flash mapping for BCM947XX boards
+ *
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
+
++#include <osl.h>
+#include <typedefs.h>
+#include <bcmnvram.h>
+#include <bcmutils.h>
+
+module_init(init_bcm947xx_map);
+module_exit(cleanup_bcm947xx_map);
-diff -Nur linux-2.4.30/drivers/mtd/maps/Config.in linux-2.4.30-brcm/drivers/mtd/maps/Config.in
---- linux-2.4.30/drivers/mtd/maps/Config.in 2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.30-brcm/drivers/mtd/maps/Config.in 2005-05-25 18:58:03.000000000 +0200
-@@ -48,6 +48,7 @@
- fi
-
- if [ "$CONFIG_MIPS" = "y" ]; then
-+ dep_tristate ' CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
- dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
- dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
- dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
-diff -Nur linux-2.4.30/drivers/mtd/maps/Makefile linux-2.4.30-brcm/drivers/mtd/maps/Makefile
---- linux-2.4.30/drivers/mtd/maps/Makefile 2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.30-brcm/drivers/mtd/maps/Makefile 2005-05-25 18:57:31.000000000 +0200
-@@ -3,6 +3,8 @@
- #
- # $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $
-
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- BELOW25 := $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/)
-
- ifeq ($(BELOW25),y)
-@@ -10,6 +12,7 @@
- endif
-
- # Chip mappings
-+obj-$(CONFIG_MTD_BCM947XX) += bcm947xx-flash.o
- obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
- obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
- obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
-diff -Nur linux-2.4.30/drivers/net/Config.in linux-2.4.30-brcm/drivers/net/Config.in
---- linux-2.4.30/drivers/net/Config.in 2005-01-19 15:09:56.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/Config.in 2005-05-25 04:34:51.000000000 +0200
+diff -urN linux.old/drivers/net/Config.in linux.dev/drivers/net/Config.in
+--- linux.old/drivers/net/Config.in 2005-11-07 23:12:51.110920000 +0100
++++ linux.dev/drivers/net/Config.in 2005-11-07 21:57:07.905589500 +0100
@@ -2,6 +2,8 @@
# Network device configuration
#
source drivers/net/arcnet/Config.in
tristate 'Dummy net driver support' CONFIG_DUMMY
-@@ -173,6 +175,7 @@
+@@ -174,6 +176,7 @@
dep_tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT $CONFIG_ISA
dep_tristate ' Broadcom 4400 ethernet support (EXPERIMENTAL)' CONFIG_B44 $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA
dep_tristate ' DECchip Tulip (dc21x4x) PCI support' CONFIG_TULIP $CONFIG_PCI
if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then
-diff -Nur linux-2.4.30/drivers/net/et/Makefile linux-2.4.30-brcm/drivers/net/et/Makefile
---- linux-2.4.30/drivers/net/et/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/et/Makefile 2005-05-26 02:37:05.000000000 +0200
+diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
+--- linux.old/drivers/net/Makefile 2005-11-07 23:12:51.110920000 +0100
++++ linux.dev/drivers/net/Makefile 2005-11-07 21:57:07.905589500 +0100
+@@ -3,6 +3,8 @@
+ # Makefile for the Linux network (ethercard) device drivers.
+ #
+
++EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
++
+ obj-y :=
+ obj-m :=
+ obj-n :=
+@@ -39,6 +41,9 @@
+ obj-$(CONFIG_ISDN) += slhc.o
+ endif
+
++subdir-$(CONFIG_HND) += hnd
++subdir-$(CONFIG_ET) += et
++subdir-$(CONFIG_WL) += wl
+ subdir-$(CONFIG_NET_PCMCIA) += pcmcia
+ subdir-$(CONFIG_NET_WIRELESS) += wireless
+ subdir-$(CONFIG_TULIP) += tulip
+@@ -69,6 +74,16 @@
+ obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
+ obj-$(CONFIG_SUNGEM) += sungem.o
+
++ifeq ($(CONFIG_HND),y)
++ obj-y += hnd/hnd.o
++endif
++ifeq ($(CONFIG_ET),y)
++ obj-y += et/et.o
++endif
++ifeq ($(CONFIG_WL),y)
++ obj-y += wl/wl.o
++endif
++
+ obj-$(CONFIG_MACE) += mace.o
+ obj-$(CONFIG_BMAC) += bmac.o
+ obj-$(CONFIG_GMAC) += gmac.o
+@@ -266,6 +281,7 @@
+ endif
+ endif
+
++
+ include $(TOPDIR)/Rules.make
+
+ clean:
+diff -urN linux.old/drivers/net/et/Makefile linux.dev/drivers/net/et/Makefile
+--- linux.old/drivers/net/et/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/et/Makefile 2005-11-07 21:57:07.905589500 +0100
@@ -0,0 +1,21 @@
+#
+# Makefile for the Broadcom et driver
+obj-m := $(O_TARGET)
+
+include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.30/drivers/net/hnd/bcmsrom.c linux-2.4.30-brcm/drivers/net/hnd/bcmsrom.c
---- linux-2.4.30/drivers/net/hnd/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/bcmsrom.c 2005-05-22 23:00:53.000000000 +0200
-@@ -0,0 +1,714 @@
+diff -urN linux.old/drivers/net/hnd/Makefile linux.dev/drivers/net/hnd/Makefile
+--- linux.old/drivers/net/hnd/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/Makefile 2005-11-07 21:57:07.905589500 +0100
+@@ -0,0 +1,19 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
++
++EXTRA_CFLAGS += -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
++
++O_TARGET := hnd.o
++
++HND_OBJS := bcmutils.o hnddma.o linux_osl.o sbutils.o bcmsrom.o
++
++export-objs := shared_ksyms.o
++obj-y := shared_ksyms.o $(HND_OBJS)
++obj-m := $(O_TARGET)
++
++include $(TOPDIR)/Rules.make
++
++shared_ksyms.c: shared_ksyms.sh $(HND_OBJS)
++ sh -e $< $(HND_OBJS) > $@
+diff -urN linux.old/drivers/net/hnd/bcmsrom.c linux.dev/drivers/net/hnd/bcmsrom.c
+--- linux.old/drivers/net/hnd/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/bcmsrom.c 2005-11-07 22:28:05.077337250 +0100
+@@ -0,0 +1,936 @@
+/*
+ * Misc useful routines to access NIC SROM/OTP .
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <sbpcmcia.h>
+#include <pcicfg.h>
+#include <sbutils.h>
++#include <bcmnvram.h>
+
+#include <proto/ethernet.h> /* for sprom content groking */
+
+#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */
+#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */
+
-+static int initvars_srom_pci(void *osh, void *curmap, char **vars, int *count);
-+static int initvars_cis_pcmcia(void *sbh, void *curmap, void *osh, char **vars, int *count);
-+static int srom_parsecis(void *osh, uint8 *cis, char **vars, int *count);
-+static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
-+static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
-+static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
++static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count);
++static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, int *count);
++static int initvars_flash_sb(void *sbh, char **vars, int *count);
++static int srom_parsecis(osl_t *osh, uint8 *cis, char **vars, int *count);
++static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd);
++static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data);
++static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data);
+static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc);
+
++static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count);
++static int initvars_flash(osl_t *osh, char **vp, int len, char *devpath);
++
+/*
+ * Initialize local vars from the right source for this platform.
+ * Return 0 on success, nonzero on error.
+ */
+int
-+srom_var_init(void *sbh, uint bustype, void *curmap, void *osh, char **vars, int *count)
++srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count)
+{
+ ASSERT(bustype == BUSTYPE(bustype));
-+ if (vars == NULL)
++ if (vars == NULL || count == NULL)
+ return (0);
+
+ switch (BUSTYPE(bustype)) {
+ case SB_BUS:
-+ /* These two could be asserts ... */
-+ *vars = NULL;
-+ *count = 0;
-+ return(0);
++ case JTAG_BUS:
++ return initvars_flash_sb(sbh, vars, count);
+
+ case PCI_BUS:
+ ASSERT(curmap); /* can not be NULL */
-+ return(initvars_srom_pci(osh, curmap, vars, count));
++ return initvars_srom_pci(sbh, curmap, vars, count);
+
+ case PCMCIA_BUS:
-+ return(initvars_cis_pcmcia(sbh, curmap, osh, vars, count));
++ return initvars_cis_pcmcia(sbh, osh, vars, count);
+
+
+ default:
+
+/* support only 16-bit word read from srom */
+int
-+srom_read(uint bustype, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
+{
+ void *srom;
+ uint i, off, nw;
+
+/* support only 16-bit word write into srom */
+int
-+srom_write(uint bustype, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf)
+{
+ uint16 *srom;
+ uint i, off, nw, crc_range;
+
+
+static int
-+srom_parsecis(void *osh, uint8 *cis, char **vars, int *count)
++srom_parsecis(osl_t *osh, uint8 *cis, char **vars, int *count)
+{
+ char eabuf[32];
+ char *vp, *base;
+ int i, j;
+ uint varsize;
+ bool ag_init = FALSE;
-+ uint16 w;
++ uint32 w32;
+
+ ASSERT(vars);
+ ASSERT(count);
+
+ base = vp = MALLOC(osh, VARS_MAX);
+ ASSERT(vp);
++ if (!vp)
++ return -2;
+
+ i = 0;
+ do {
+
+ case CISTPL_BRCM_HNBU:
+ switch (cis[i]) {
++ case HNBU_SROMREV:
++ sromrev = cis[i + 1];
++ break;
++
+ case HNBU_CHIPID:
+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
+ vp++;
+ break;
+
+ case HNBU_CC:
++ ASSERT(sromrev > 1);
+ vp += sprintf(vp, "cc=%d", cis[i + 1]);
+ vp++;
+ break;
+
+ case HNBU_PAPARMS:
-+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
-+ vp++;
-+ if (tlen == 9) {
-+ /* New version */
++ if (tlen == 2) {
++ ASSERT(sromrev == 1);
++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]);
++ vp++;
++ } else if (tlen >= 9) {
++ if (tlen == 10) {
++ ASSERT(sromrev == 2);
++ vp += sprintf(vp, "opo=%d", cis[i + 9]);
++ vp++;
++ } else
++ ASSERT(tlen == 9);
++
+ for (j = 0; j < 3; j++) {
+ vp += sprintf(vp, "pa0b%d=%d", j,
+ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
+ }
+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
+ vp++;
-+ }
++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]);
++ vp++;
++ } else
++ ASSERT(tlen >= 9);
+ break;
+
+ case HNBU_OEM:
++ ASSERT(sromrev == 1);
+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
+ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
+ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
+ vp++;
+ break;
++
+ case HNBU_BOARDFLAGS:
-+ w = (cis[i + 2] << 8) + cis[i + 1];
-+ if (w == 0xffff) w = 0;
-+ vp += sprintf(vp, "boardflags=%d", w);
++ w32 = (cis[i + 2] << 8) + cis[i + 1];
++ if (tlen == 5)
++ w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16);
++ vp += sprintf(vp, "boardflags=0x%x", w32);
+ vp++;
+ break;
-+ case HNBU_LED:
++
++ case HNBU_LEDS:
+ if (cis[i + 1] != 0xff) {
+ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
+ vp++;
+ vp++;
+ }
+ break;
++
++ case HNBU_CCODE:
++ ASSERT(sromrev > 1);
++ vp += sprintf(vp, "ccode=%c%c", cis[i + 1], cis[i + 2]);
++ vp++;
++ vp += sprintf(vp, "cctl=0x%x", cis[i + 3]);
++ vp++;
++ break;
++
++ case HNBU_CCKPO:
++ ASSERT(sromrev > 2);
++ vp += sprintf(vp, "cckpo=0x%x", (cis[i + 2] << 8) | cis[i + 1]);
++ vp++;
++ break;
++
++ case HNBU_OFDMPO:
++ ASSERT(sromrev > 2);
++ vp += sprintf(vp, "ofdmpo=0x%x", (cis[i + 4] << 24) |
++ (cis[i + 3] << 16) | (cis[i + 2] << 8) | cis[i + 1]);
++ vp++;
++ break;
+ }
+ break;
+
+ vp += sprintf(vp, "sromrev=%d", sromrev);
+ vp++;
+
-+ /* For now just set boardflags2 to zero */
-+ vp += sprintf(vp, "boardflags2=0");
-+ vp++;
-+
+ /* if there is no antenna gain field, set default */
+ if (ag_init == FALSE) {
++ ASSERT(sromrev == 1);
+ vp += sprintf(vp, "ag0=%d", 0xff);
+ vp++;
+ }
+ } else {
+ vp = MALLOC(osh, varsize);
+ ASSERT(vp);
-+ bcopy(base, vp, varsize);
++ if (vp)
++ bcopy(base, vp, varsize);
+ MFREE(osh, base, VARS_MAX);
+ *vars = vp;
++ if (!vp) {
++ *count = 0;
++ return -2;
++ }
+ }
+ *count = varsize;
+
+
+/* set PCMCIA sprom command register */
+static int
-+sprom_cmd_pcmcia(void *osh, uint8 cmd)
++sprom_cmd_pcmcia(osl_t *osh, uint8 cmd)
+{
+ uint8 status = 0;
+ uint wait_cnt = 1000;
+
+/* read a word from the PCMCIA srom */
+static int
-+sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data)
+{
+ uint8 addr_l, addr_h, data_l, data_h;
+
+
+/* write a word to the PCMCIA srom */
+static int
-+sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data)
+{
+ uint8 addr_l, addr_h, data_l, data_h;
+
+static int
+sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc)
+{
-+ uint8 chk8;
++ int err = 0;
+ uint i;
+
+ /* read the sprom */
+ if (check_crc) {
+ /* fixup the endianness so crc8 will pass */
+ htol16_buf(buf, nwords * 2);
-+ if ((chk8 = hndcrc8((uchar*)buf, nwords * 2, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
-+ return (1);
++ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE)
++ err = 1;
+ /* now correct the endianness of the byte array */
+ ltoh16_buf(buf, nwords * 2);
+ }
++
++ return err;
++}
+
-+ return (0);
++/*
++* Create variable table from memory.
++* Return 0 on success, nonzero on error.
++*/
++static int
++initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count)
++{
++ int c = (int)(end - start);
++
++ /* do it only when there is more than just the null string */
++ if (c > 1) {
++ char *vp = MALLOC(osh, c);
++ ASSERT(vp);
++ if (!vp)
++ return BCME_NOMEM;
++ bcopy(start, vp, c);
++ *vars = vp;
++ *count = c;
++ }
++ else {
++ *vars = NULL;
++ *count = 0;
++ }
++
++ return 0;
+}
+
+/*
-+ * Initialize nonvolatile variable table from sprom.
++* Find variables with <devpath> from flash. 'base' points to the beginning
++* of the table upon enter and to the end of the table upon exit when success.
++* Return 0 on success, nonzero on error.
++*/
++static int
++initvars_flash(osl_t *osh, char **base, int size, char *devpath)
++{
++ char *vp = *base;
++ char *flash;
++ int err;
++ char *s;
++ uint l, dl, copy_len;
++
++ /* allocate memory and read in flash */
++ if (!(flash = MALLOC(osh, NVRAM_SPACE)))
++ return BCME_NOMEM;
++ if ((err = BCMINIT(nvram_getall)(flash, NVRAM_SPACE)))
++ goto exit;
++
++ /* grab vars with the <devpath> prefix in name */
++ dl = strlen(devpath);
++ for (s = flash; s && *s; s += l + 1) {
++ l = strlen(s);
++
++ /* skip non-matching variable */
++ if (strncmp(s, devpath, dl))
++ continue;
++
++ /* is there enough room to copy? */
++ copy_len = l - dl + 1;
++ if (size < (int)copy_len) {
++ err = BCME_BUFTOOSHORT;
++ goto exit;
++ }
++
++ /* no prefix, just the name=value */
++ strcpy(vp, &s[dl]);
++ vp += copy_len;
++ size -= copy_len;
++ }
++
++ /* add null string as terminator */
++ if (size < 1) {
++ err = BCME_BUFTOOSHORT;
++ goto exit;
++ }
++ *vp++ = '\0';
++
++ *base = vp;
++
++exit: MFREE(osh, flash, NVRAM_SPACE);
++ return err;
++}
++
++/*
++ * Initialize nonvolatile variable table from flash.
+ * Return 0 on success, nonzero on error.
+ */
++static int
++initvars_flash_sb(void *sbh, char **vars, int *count)
++{
++ osl_t *osh = sb_osh(sbh);
++ char devpath[SB_DEVPATH_BUFSZ];
++ char *vp, *base;
++ int err;
++
++ ASSERT(vars);
++ ASSERT(count);
++
++ if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
++ return err;
++
++ base = vp = MALLOC(osh, VARS_MAX);
++ ASSERT(vp);
++ if (!vp)
++ return BCME_NOMEM;
++
++ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
++ goto err;
++
++ err = initvars_table(osh, base, vp, vars, count);
++
++err: MFREE(osh, base, VARS_MAX);
++ return err;
++}
+
++/*
++ * Initialize nonvolatile variable table from sprom.
++ * Return 0 on success, nonzero on error.
++ */
+static int
-+initvars_srom_pci(void *osh, void *curmap, char **vars, int *count)
++initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count)
+{
+ uint16 w, b[64];
+ uint8 sromrev;
+ struct ether_addr ea;
+ char eabuf[32];
-+ uint32 bfl;
-+ int c, woff, i;
++ uint32 w32;
++ int woff, i;
+ char *vp, *base;
++ osl_t *osh = sb_osh(sbh);
++ bool flash = FALSE;
++ char name[SB_DEVPATH_BUFSZ+16], *value;
++ char devpath[SB_DEVPATH_BUFSZ];
++ int err;
+
-+ if (sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE))
-+ return (-1);
-+
-+ /* top word of sprom contains version and crc8 */
-+ sromrev = b[63] & 0xff;
-+ /* bcm4401 sroms misprogrammed */
-+ if (sromrev == 0x10)
-+ sromrev = 1;
-+ if ((sromrev != 1) && (sromrev != 2))
++ /*
++ * Apply CRC over SROM content regardless SROM is present or not,
++ * and use variable <devpath>sromrev's existance in flash to decide
++ * if we should return an error when CRC fails or read SROM variables
++ * from flash.
++ */
++ if (sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE)) {
++ if ((err = sb_devpath(sbh, devpath, sizeof(devpath))))
++ return err;
++ sprintf(name, "%ssromrev", devpath);
++ if (!(value = getvar(NULL, name)))
++ return (-1);
++ sromrev = (uint8)bcm_strtoul(value, NULL, 0);
++ flash = TRUE;
++ }
++ /* srom is good */
++ else {
++ /* top word of sprom contains version and crc8 */
++ sromrev = b[63] & 0xff;
++ /* bcm4401 sroms misprogrammed */
++ if (sromrev == 0x10)
++ sromrev = 1;
++ }
++
++ /* srom version check */
++ if (sromrev > 3)
+ return (-2);
+
+ ASSERT(vars);
+
+ base = vp = MALLOC(osh, VARS_MAX);
+ ASSERT(vp);
++ if (!vp)
++ return -2;
+
++ /* read variables from flash */
++ if (flash) {
++ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath)))
++ goto err;
++ goto done;
++ }
++
+ vp += sprintf(vp, "sromrev=%d", sromrev);
+ vp++;
+
++ if (sromrev >= 3) {
++ /* New section takes over the 3th hardware function space */
++
++ /* Words 22+23 are 11a (mid) ofdm power offsets */
++ w32 = ((uint32)b[23] << 16) | b[22];
++ vp += sprintf(vp, "ofdmapo=%d", w32);
++ vp++;
++
++ /* Words 24+25 are 11a (low) ofdm power offsets */
++ w32 = ((uint32)b[25] << 16) | b[24];
++ vp += sprintf(vp, "ofdmalpo=%d", w32);
++ vp++;
++
++ /* Words 26+27 are 11a (high) ofdm power offsets */
++ w32 = ((uint32)b[27] << 16) | b[26];
++ vp += sprintf(vp, "ofdmahpo=%d", w32);
++ vp++;
++
++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/
++ w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8);
++ vp += sprintf(vp, "gpiotimerval=%d", w32);
++
++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/
++ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) | /* oncount*/
++ ((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */
++ vp += sprintf(vp, "gpiotimerval=%d", w32);
++
++ vp++;
++ }
++
+ if (sromrev >= 2) {
+ /* New section takes over the 4th hardware function space */
+
+ vp++;
+
+ /* Word 57 is boardflags, if not programmed make it zero */
-+ bfl = (uint32)b[57];
-+ if (bfl == 0xffff) bfl = 0;
++ w32 = (uint32)b[57];
++ if (w32 == 0xffff) w32 = 0;
+ if (sromrev > 1) {
-+ /* Word 28 is boardflags2 */
-+ bfl |= (uint32)b[28] << 16;
++ /* Word 28 is the high bits of boardflags */
++ w32 |= (uint32)b[28] << 16;
+ }
-+ vp += sprintf(vp, "boardflags=%d", bfl);
++ vp += sprintf(vp, "boardflags=%d", w32);
+ vp++;
+
+ /* Word 58 is antenna gain 0/1 */
+ ((b[61] >> 8) & 0xff), (b[61] & 0xff),
+ ((b[62] >> 8) & 0xff), (b[62] & 0xff));
+ vp++;
-+ } else {
++ } else if (sromrev == 2) {
+ /* Word 60 OFDM tx power offset from CCK level */
+ /* OFDM Power Offset - opo */
+ vp += sprintf(vp, "opo=%d", b[60] & 0xff);
+ vp++;
++ } else {
++ /* Word 60: cck power offsets */
++ vp += sprintf(vp, "cckpo=%d", b[60]);
++ vp++;
++
++ /* Words 61+62: 11g ofdm power offsets */
++ w32 = ((uint32)b[62] << 16) | b[61];
++ vp += sprintf(vp, "ofdmgpo=%d", w32);
++ vp++;
+ }
+
+ /* final nullbyte terminator */
+ *vp++ = '\0';
+
-+ c = (int)(vp - base);
+ ASSERT((vp - base) <= VARS_MAX);
-+
-+ if (c == VARS_MAX) {
-+ *vars = base;
-+ } else {
-+ vp = MALLOC(osh, c);
-+ ASSERT(vp);
-+ bcopy(base, vp, c);
-+ MFREE(osh, base, VARS_MAX);
-+ *vars = vp;
-+ }
-+ *count = c;
-+
-+ return (0);
++
++done: err = initvars_table(osh, base, vp, vars, count);
++
++err: MFREE(osh, base, VARS_MAX);
++ return err;
+}
+
+/*
+ * Return 0 on success, nonzero on error.
+ */
+static int
-+initvars_cis_pcmcia(void *sbh, void *curmap, void *osh, char **vars, int *count)
++initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, int *count)
+{
+ uint8 *cis = NULL;
+ int rc;
+ return (rc);
+}
+
-diff -Nur linux-2.4.30/drivers/net/hnd/bcmutils.c linux-2.4.30-brcm/drivers/net/hnd/bcmutils.c
---- linux-2.4.30/drivers/net/hnd/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/bcmutils.c 2005-05-24 20:26:25.000000000 +0200
-@@ -0,0 +1,862 @@
+diff -urN linux.old/drivers/net/hnd/bcmutils.c linux.dev/drivers/net/hnd/bcmutils.c
+--- linux.old/drivers/net/hnd/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/bcmutils.c 2005-11-08 12:52:21.836276500 +0100
+@@ -0,0 +1,1081 @@
+/*
+ * Misc useful OS-independent routines.
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ */
+
+#include <typedefs.h>
++#ifdef BCMDRIVER
+#include <osl.h>
++#include <sbutils.h>
+#include <bcmnvram.h>
-+#include <bcmutils.h>
++#else
++#include <stdio.h>
++#include <string.h>
++#endif
++#include <bcmutils.h>
+#include <bcmendian.h>
+#include <bcmdevs.h>
+
+#ifdef BCMDRIVER
+/* copy a pkt buffer chain into a buffer */
+uint
-+pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
++pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf)
+{
+ uint n, ret = 0;
+
+ len = 4096; /* "infinite" */
+
+ /* skip 'offset' bytes */
-+ for (; p && offset; p = PKTNEXT(drv, p)) {
-+ if (offset < (uint)PKTLEN(drv, p))
++ for (; p && offset; p = PKTNEXT(osh, p)) {
++ if (offset < (uint)PKTLEN(osh, p))
+ break;
-+ offset -= PKTLEN(drv, p);
++ offset -= PKTLEN(osh, p);
+ }
+
+ if (!p)
+ return 0;
+
+ /* copy the data */
-+ for (; p && len; p = PKTNEXT(drv, p)) {
-+ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
-+ bcopy(PKTDATA(drv, p) + offset, buf, n);
++ for (; p && len; p = PKTNEXT(osh, p)) {
++ n = MIN((uint)PKTLEN(osh, p) - offset, (uint)len);
++ bcopy(PKTDATA(osh, p) + offset, buf, n);
+ buf += n;
+ len -= n;
+ ret += n;
+
+/* return total length of buffer chain */
+uint
-+pkttotlen(void *drv, void *p)
++pkttotlen(osl_t *osh, void *p)
+{
+ uint total;
+
+ total = 0;
-+ for (; p; p = PKTNEXT(drv, p))
-+ total += PKTLEN(drv, p);
++ for (; p; p = PKTNEXT(osh, p))
++ total += PKTLEN(osh, p);
+ return (total);
+}
+
+void
-+pktq_init(struct pktq *q, uint maxlen, const bool prio_map[])
++pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[])
+{
+ q->head = q->tail = NULL;
+ q->maxlen = maxlen;
+ return (bcm_strtoul(val, NULL, 0));
+}
+
++
++/* Search for token in comma separated token-string */
++static int
++findmatch(char *string, char *name)
++{
++ uint len;
++ char *c;
++
++ len = strlen(name);
++ while ((c = strchr(string, ',')) != NULL) {
++ if (len == (uint)(c - string) && !strncmp(string, name, len))
++ return 1;
++ string = c + 1;
++ }
++
++ return (!strcmp(string, name));
++}
++
+/* Return gpio pin number assigned to the named pin */
+/*
+* Variable should be in format:
+*
-+* gpio<N>=pin_name
++* gpio<N>=pin_name,pin_name
++*
++* This format allows multiple features to share the gpio with mutual
++* understanding.
+*
-+* 'def_pin' is returned if there is no such variable found.
++* 'def_pin' is returned if a specific gpio is not defined for the requested functionality
++* and if def_pin is not used by others.
+*/
+uint
+getgpiopin(char *vars, char *pin_name, uint def_pin)
+ for (pin = 0; pin < GPIO_NUMPINS; pin ++) {
+ sprintf(name, "gpio%d", pin);
+ val = getvar(vars, name);
-+ if (val && !strcmp(val, pin_name))
++ if (val && findmatch(val, pin_name))
+ return pin;
+ }
++
++ if (def_pin != GPIO_PIN_NOTDEFINED) {
++ /* make sure the default pin is not used by someone else */
++ sprintf(name, "gpio%d", def_pin);
++ if (getvar(vars, name)) {
++ def_pin = GPIO_PIN_NOTDEFINED;
++ }
++ }
++
+ return def_pin;
+}
+
++
++static char bcm_undeferrstr[BCME_STRLEN];
++
++static const char *bcmerrorstrtable[] = \
++{ "OK", /* 0 */
++ "Undefined error", /* BCME_ERROR */
++ "Bad Argument", /* BCME_BADARG*/
++ "Bad Option", /* BCME_BADOPTION*/
++ "Not up", /* BCME_NOTUP */
++ "Not down", /* BCME_NOTDOWN */
++ "Not AP", /* BCME_NOTAP */
++ "Not STA", /* BCME_NOTSTA */
++ "Bad Key Index", /* BCME_BADKEYIDX */
++ "Radio Off", /* BCME_RADIOOFF */
++ "Not band locked", /* BCME_NOTBANDLOCKED */
++ "No clock", /* BCME_NOCLK */
++ "Bad Rate valueset", /* BCME_BADRATESET */
++ "Bad Band", /* BCME_BADBAND */
++ "Buffer too short", /* BCME_BUFTOOSHORT */
++ "Buffer too length", /* BCME_BUFTOOLONG */
++ "Busy", /* BCME_BUSY */
++ "Not Associated", /* BCME_NOTASSOCIATED */
++ "Bad SSID len", /* BCME_BADSSIDLEN */
++ "Out of Range Channel", /* BCME_OUTOFRANGECHAN */
++ "Bad Channel", /* BCME_BADCHAN */
++ "Bad Address", /* BCME_BADADDR */
++ "Not Enough Resources", /* BCME_NORESOURCE */
++ "Unsupported", /* BCME_UNSUPPORTED */
++ "Bad length", /* BCME_BADLENGTH */
++ "Not Ready", /* BCME_NOTREADY */
++ "Not Permitted", /* BCME_EPERM */
++ "No Memory", /* BCME_NOMEM */
++ "Associated", /* BCME_ASSOCIATED */
++ "Not In Range", /* BCME_RANGE */
++ "Not Found" /* BCME_NOTFOUND */
++ };
++
++/* Convert the Error codes into related Error strings */
++const char *
++bcmerrorstr(int bcmerror)
++{
++ int abs_bcmerror;
++
++ abs_bcmerror = ABS(bcmerror);
++
++ /* check if someone added a bcmerror code but forgot to add errorstring */
++ ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(bcmerrorstrtable) - 1));
++ if ( (bcmerror > 0) || (abs_bcmerror > ABS(BCME_LAST))) {
++ sprintf(bcm_undeferrstr, "undefined Error %d", bcmerror);
++ return bcm_undeferrstr;
++ }
++
++ ASSERT((strlen((char*)bcmerrorstrtable[abs_bcmerror])) < BCME_STRLEN);
++
++ return bcmerrorstrtable[abs_bcmerror];
++}
+#endif /* #ifdef BCMDRIVER */
+
++
+/*******************************************************************************
+ * crc8
+ *
+ /* handle bulk of data as 32-bit words */
+ pend = pdata + (nbytes & 0xfffffffc);
+ while (pdata < pend) {
-+ *tptr = *((ulong *)pdata)++;
++ tptr = *((ulong *) pdata);
++ *((ulong *) pdata) += 1;
+ CRC_INNER_LOOP(32, crc, tmp[0]);
+ CRC_INNER_LOOP(32, crc, tmp[1]);
+ CRC_INNER_LOOP(32, crc, tmp[2]);
+/*
+ * Advance from the current 1-byte tag/1-byte length/variable-length value
+ * triple, to the next, returning a pointer to the next.
++ * If the current or next TLV is invalid (does not fit in given buffer length),
++ * NULL is returned.
++ * *buflen is not modified if the TLV elt parameter is invalid, or is decremented
++ * by the TLV paramter's length if it is valid.
+ */
+bcm_tlv_t *
+bcm_next_tlv(bcm_tlv_t *elt, int *buflen)
+ int len;
+
+ /* validate current elt */
-+ if (*buflen < 2) {
++ if (!bcm_valid_tlv(elt, *buflen))
+ return NULL;
-+ }
+
++ /* advance to next elt */
+ len = elt->len;
-+
-+ /* validate remaining buflen */
-+ if (*buflen >= (2 + len + 2)) {
-+ elt = (bcm_tlv_t*)(elt->data + len);
-+ *buflen -= (2 + len);
-+ } else {
-+ elt = NULL;
-+ }
++ elt = (bcm_tlv_t*)(elt->data + len);
++ *buflen -= (2 + len);
++
++ /* validate next elt */
++ if (!bcm_valid_tlv(elt, *buflen))
++ return NULL;
+
+ return elt;
+}
+ }
+ return NULL;
+}
++/* routine to dump fields in a fileddesc structure */
++
++uint
++bcmdumpfields(readreg_rtn read_rtn, void *arg0, void *arg1, struct fielddesc *fielddesc_array, char *buf, uint32 bufsize)
++{
++ uint filled_len;
++ uint len;
++ struct fielddesc *cur_ptr;
++
++ filled_len = 0;
++ cur_ptr = fielddesc_array;
++
++ while (bufsize > (filled_len + 64)) {
++ if (cur_ptr->nameandfmt == NULL)
++ break;
++ len = sprintf(buf, cur_ptr->nameandfmt, read_rtn(arg0, arg1, cur_ptr->offset));
++ buf += len;
++ filled_len += len;
++ cur_ptr++;
++ }
++ return filled_len;
++}
++
++uint
++bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint buflen)
++{
++ uint len;
++
++ len = strlen(name) + 1;
++
++ if ((len + datalen) > buflen)
++ return 0;
++
++ strcpy(buf, name);
++
++ /* append data onto the end of the name string */
++ memcpy(&buf[len], data, datalen);
++ len += datalen;
++
++ return len;
++}
++
++/* Quarter dBm units to mW
++ * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153
++ * Table is offset so the last entry is largest mW value that fits in
++ * a uint16.
++ */
++
++#define QDBM_OFFSET 153
++#define QDBM_TABLE_LEN 40
++
++/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET.
++ * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2
++ */
++#define QDBM_TABLE_LOW_BOUND 6493
++
++/* Largest mW value that will round down to the last table entry,
++ * QDBM_OFFSET + QDBM_TABLE_LEN-1.
++ * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) + mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2.
++ */
++#define QDBM_TABLE_HIGH_BOUND 64938
++
++static const uint16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = {
++/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */
++/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000,
++/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849,
++/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119,
++/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811,
++/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096
++};
++
++uint16
++bcm_qdbm_to_mw(uint8 qdbm)
++{
++ uint factor = 1;
++ int idx = qdbm - QDBM_OFFSET;
++
++ if (idx > QDBM_TABLE_LEN) {
++ /* clamp to max uint16 mW value */
++ return 0xFFFF;
++ }
++
++ /* scale the qdBm index up to the range of the table 0-40
++ * where an offset of 40 qdBm equals a factor of 10 mW.
++ */
++ while (idx < 0) {
++ idx += 40;
++ factor *= 10;
++ }
++
++ /* return the mW value scaled down to the correct factor of 10,
++ * adding in factor/2 to get proper rounding. */
++ return ((nqdBm_to_mW_map[idx] + factor/2) / factor);
++}
++
++uint8
++bcm_mw_to_qdbm(uint16 mw)
++{
++ uint8 qdbm;
++ int offset;
++ uint mw_uint = mw;
++ uint boundary;
++
++ /* handle boundary case */
++ if (mw_uint <= 1)
++ return 0;
++
++ offset = QDBM_OFFSET;
++
++ /* move mw into the range of the table */
++ while (mw_uint < QDBM_TABLE_LOW_BOUND) {
++ mw_uint *= 10;
++ offset -= 40;
++ }
++
++ for (qdbm = 0; qdbm < QDBM_TABLE_LEN-1; qdbm++) {
++ boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm+1] - nqdBm_to_mW_map[qdbm])/2;
++ if (mw_uint < boundary) break;
++ }
+
++ qdbm += (uint8)offset;
+
-diff -Nur linux-2.4.30/drivers/net/hnd/hnddma.c linux-2.4.30-brcm/drivers/net/hnd/hnddma.c
---- linux-2.4.30/drivers/net/hnd/hnddma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/hnddma.c 2005-05-25 01:12:49.000000000 +0200
-@@ -0,0 +1,865 @@
++ return(qdbm);
++}
+diff -urN linux.old/drivers/net/hnd/hnddma.c linux.dev/drivers/net/hnd/hnddma.c
+--- linux.old/drivers/net/hnd/hnddma.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/hnddma.c 2005-11-08 16:07:38.846817500 +0100
+@@ -0,0 +1,1527 @@
+/*
+ * Generic Broadcom Home Networking Division (HND) DMA module.
+ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <bcmendian.h>
+#include <sbconfig.h>
+#include <bcmutils.h>
++#include <bcmdevs.h>
++#include <sbutils.h>
+
+struct dma_info; /* forward declaration */
+#define di_t struct dma_info
++
++#include <sbhnddma.h>
+#include <hnddma.h>
+
+/* debug/trace */
-+#define DMA_ERROR(args)
++#define DMA_ERROR(args)
+#define DMA_TRACE(args)
+
-+/* default dma message level(if input msg_level pointer is null in dma_attach()) */
-+static uint dma_msg_level = 0;
++/* default dma message level (if input msg_level pointer is null in dma_attach()) */
++static uint dma_msg_level =
++ 0;
+
+#define MAXNAMEL 8
-+#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t))
+
+/* dma engine software state */
+typedef struct dma_info {
+ hnddma_t hnddma; /* exported structure */
+ uint *msg_level; /* message level pointer */
-+
+ char name[MAXNAMEL]; /* callers name for diag msgs */
-+ void *drv; /* driver handle */
++
+ void *osh; /* os handle */
-+ dmaregs_t *regs; /* dma engine registers */
-+
-+ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */
++ sb_t *sbh; /* sb handle */
++
++ bool dma64; /* dma64 enabled */
++ bool addrext; /* this dma engine supports DmaExtendedAddrChanges */
++
++ dma32regs_t *d32txregs; /* 32 bits dma tx engine registers */
++ dma32regs_t *d32rxregs; /* 32 bits dma rx engine registers */
++ dma64regs_t *d64txregs; /* 64 bits dma tx engine registers */
++ dma64regs_t *d64rxregs; /* 64 bits dma rx engine registers */
++
++ uint32 dma64align; /* either 8k or 4k depends on number of dd */
++ dma32dd_t *txd32; /* pointer to dma32 tx descriptor ring */
++ dma64dd_t *txd64; /* pointer to dma64 tx descriptor ring */
++ uint ntxd; /* # tx descriptors tunable */
+ uint txin; /* index of next descriptor to reclaim */
+ uint txout; /* index of next descriptor to post */
+ uint txavail; /* # free tx descriptors */
+ uint txdalign; /* #bytes added to alloc'd mem to align txd */
+ uint txdalloc; /* #bytes allocated for the ring */
+
-+ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */
++ dma32dd_t *rxd32; /* pointer to dma32 rx descriptor ring */
++ dma64dd_t *rxd64; /* pointer to dma64 rx descriptor ring */
++ uint nrxd; /* # rx descriptors tunable */
+ uint rxin; /* index of next descriptor to reclaim */
+ uint rxout; /* index of next descriptor to post */
+ void **rxp; /* pointer to parallel array of pointers to packets */
+ uint rxdalloc; /* #bytes allocated for the ring */
+
+ /* tunables */
-+ uint ntxd; /* # tx descriptors */
-+ uint nrxd; /* # rx descriptors */
+ uint rxbufsize; /* rx buffer size in bytes */
+ uint nrxpost; /* # rx buffers to keep posted */
+ uint rxoffset; /* rxcontrol offset */
-+ uint ddoffset; /* add to get dma address of descriptor ring */
-+ uint dataoffset; /* add to get dma address of data buffer */
++ uint ddoffsetlow; /* add to get dma address of descriptor ring, low 32 bits */
++ uint ddoffsethigh; /* add to get dma address of descriptor ring, high 32 bits */
++ uint dataoffsetlow; /* add to get dma address of data buffer, low 32 bits */
++ uint dataoffsethigh; /* add to get dma address of data buffer, high 32 bits */
+} dma_info_t;
+
++#ifdef BCMDMA64
++#define DMA64_ENAB(di) ((di)->dma64)
++#else
++#define DMA64_ENAB(di) (0)
++#endif
++
+/* descriptor bumping macros */
+#define XXD(x, n) ((x) & ((n) - 1))
+#define TXD(x) XXD((x), di->ntxd)
+#define NRXDACTIVE(h, t) RXD(t - h)
+
+/* macros to convert between byte offsets and indexes */
-+#define B2I(bytes) ((bytes) / sizeof (dmadd_t))
-+#define I2B(index) ((index) * sizeof (dmadd_t))
++#define B2I(bytes, type) ((bytes) / sizeof(type))
++#define I2B(index, type) ((index) * sizeof(type))
++
++#define PCI32ADDR_HIGH 0xc0000000 /* address[31:30] */
++#define PCI32ADDR_HIGH_SHIFT 30
+
-+/*
-+ * This assume the largest i/o address is, in fact, the pci big window
-+ * and that the pci core sb2pcitranslation2 register has been left with
-+ * the default 0x0 pci base address.
-+ */
-+#define MAXDMAADDR SB_PCI_DMA_SZ
-+#define DMA_ADDRESSABLE(x) !((x) & ~(MAXDMAADDR - 1))
+
+/* prototypes */
++static bool dma_isaddrext(dma_info_t *di);
++static bool dma_alloc(dma_info_t *di, uint direction);
++
++static bool dma32_alloc(dma_info_t *di, uint direction);
++static void dma32_txreset(dma_info_t *di);
++static void dma32_rxreset(dma_info_t *di);
++static bool dma32_txsuspendedidle(dma_info_t *di);
++static int dma32_txfast(dma_info_t *di, void *p0, uint32 coreflags);
++static void* dma32_getnexttxp(dma_info_t *di, bool forceall);
++static void* dma32_getnextrxp(dma_info_t *di, bool forceall);
++static void dma32_txrotate(di_t *di);
++
++/* prototype or stubs */
++#ifdef BCMDMA64
++static bool dma64_alloc(dma_info_t *di, uint direction);
++static void dma64_txreset(dma_info_t *di);
++static void dma64_rxreset(dma_info_t *di);
++static bool dma64_txsuspendedidle(dma_info_t *di);
++static int dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags);
++static void* dma64_getnexttxp(dma_info_t *di, bool forceall);
++static void* dma64_getnextrxp(dma_info_t *di, bool forceall);
++static void dma64_txrotate(di_t *di);
++#else
++static bool dma64_alloc(dma_info_t *di, uint direction) { return TRUE; }
++static void dma64_txreset(dma_info_t *di) {}
++static void dma64_rxreset(dma_info_t *di) {}
++static bool dma64_txsuspendedidle(dma_info_t *di) { return TRUE;}
++static int dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags) { return 0; }
++static void* dma64_getnexttxp(dma_info_t *di, bool forceall) { return NULL; }
++static void* dma64_getnextrxp(dma_info_t *di, bool forceall) { return NULL; }
++static void dma64_txrotate(di_t *di) { return; }
++#endif
++
++/* old dmaregs struct for compatibility */
++typedef volatile struct {
++ /* transmit channel */
++ uint32 xmtcontrol; /* enable, et al */
++ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */
++ uint32 xmtptr; /* last descriptor posted to chip */
++ uint32 xmtstatus; /* current active descriptor, et al */
++
++ /* receive channel */
++ uint32 rcvcontrol; /* enable, et al */
++ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */
++ uint32 rcvptr; /* last descriptor posted to chip */
++ uint32 rcvstatus; /* current active descriptor, et al */
++} dmaregs_t;
++
++typedef struct {
++ uint ddoffset;
++ uint dataoffset;
++} compat_data;
++
++static compat_data *ugly_hack = NULL;
++
++void*
++dma_attold(void *drv, void *osh, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
++ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
++{
++ dma32regs_t *dtx = regs;
++ dma32regs_t *drx = dtx + 1;
++
++ ugly_hack = kmalloc(sizeof(ugly_hack), GFP_KERNEL);
++ ugly_hack->ddoffset = ddoffset;
++ ugly_hack->dataoffset = dataoffset;
++ dma_attach((osl_t *) osh, name, NULL, dtx, drx, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, msg_level);
++ ugly_hack = NULL;
++}
++
+
+void*
-+dma_attach(void *drv, void *osh, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
-+ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
++dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
++ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level)
+{
+ dma_info_t *di;
+ uint size;
-+ void *va;
-+
-+ ASSERT(ntxd <= MAXDD);
-+ ASSERT(ISPOWEROF2(ntxd));
-+ ASSERT(nrxd <= MAXDD);
-+ ASSERT(ISPOWEROF2(nrxd));
+
+ /* allocate private info structure */
+ if ((di = MALLOC(osh, sizeof (dma_info_t))) == NULL) {
+ }
+ bzero((char*)di, sizeof (dma_info_t));
+
++ di->msg_level = msg_level ? msg_level : &dma_msg_level;
++
++ if (sbh != NULL)
++ di->dma64 = ((sb_coreflagshi(sbh, 0, 0) & SBTMH_DMA64) == SBTMH_DMA64);
++
++#ifndef BCMDMA64
++ if (di->dma64) {
++ DMA_ERROR(("dma_attach: driver doesn't have the capability to support 64 bits DMA\n"));
++ goto fail;
++ }
++#endif
++
++ /* check arguments */
++ ASSERT(ISPOWEROF2(ntxd));
++ ASSERT(ISPOWEROF2(nrxd));
++ if (nrxd == 0)
++ ASSERT(dmaregsrx == NULL);
++ if (ntxd == 0)
++ ASSERT(dmaregstx == NULL);
++
++
++ /* init dma reg pointer */
++ if (di->dma64) {
++ ASSERT(ntxd <= D64MAXDD);
++ ASSERT(nrxd <= D64MAXDD);
++ di->d64txregs = (dma64regs_t *)dmaregstx;
++ di->d64rxregs = (dma64regs_t *)dmaregsrx;
++
++ di->dma64align = D64RINGALIGN;
++ if ((ntxd < D64MAXDD / 2) && (nrxd < D64MAXDD / 2)) {
++ /* for smaller dd table, HW relax the alignment requirement */
++ di->dma64align = D64RINGALIGN / 2;
++ }
++ } else {
++ ASSERT(ntxd <= D32MAXDD);
++ ASSERT(nrxd <= D32MAXDD);
++ di->d32txregs = (dma32regs_t *)dmaregstx;
++ di->d32rxregs = (dma32regs_t *)dmaregsrx;
++ }
++
++
++ /* make a private copy of our callers name */
++ strncpy(di->name, name, MAXNAMEL);
++ di->name[MAXNAMEL-1] = '\0';
++
++ di->osh = osh;
++ di->sbh = sbh;
++
++ /* save tunables */
++ di->ntxd = ntxd;
++ di->nrxd = nrxd;
++ di->rxbufsize = rxbufsize;
++ di->nrxpost = nrxpost;
++ di->rxoffset = rxoffset;
++
++ /*
++ * figure out the DMA physical address offset for dd and data
++ * for old chips w/o sb, use zero
++ * for new chips w sb,
++ * PCI/PCIE: they map silicon backplace address to zero based memory, need offset
++ * Other bus: use zero
++ * SB_BUS BIGENDIAN kludge: use sdram swapped region for data buffer, not descriptor
++ */
++ di->ddoffsetlow = 0;
++ di->dataoffsetlow = 0;
++ if (ugly_hack != NULL) {
++ di->ddoffsetlow = ugly_hack->ddoffset;
++ di->dataoffsetlow = ugly_hack->dataoffset;
++ di->ddoffsethigh = 0;
++ di->dataoffsethigh = 0;
++ } else if (sbh != NULL) {
++ if (sbh->bustype == PCI_BUS) { /* for pci bus, add offset */
++ if ((sbh->buscoretype == SB_PCIE) && di->dma64){
++ di->ddoffsetlow = 0;
++ di->ddoffsethigh = SB_PCIE_DMA_H32;
++ } else {
++ di->ddoffsetlow = SB_PCI_DMA;
++ di->ddoffsethigh = 0;
++ }
++ di->dataoffsetlow = di->ddoffsetlow;
++ di->dataoffsethigh = di->ddoffsethigh;
++ }
++#if defined(__mips__) && defined(IL_BIGENDIAN)
++ /* use sdram swapped region for data buffers but not dma descriptors */
++ di->dataoffsetlow = di->dataoffsetlow + SB_SDRAM_SWAPPED;
++#endif
++ }
++
++ di->addrext = ((ugly_hack == NULL) ? dma_isaddrext(di) : 0);
++
++ DMA_TRACE(("%s: dma_attach: osh %p ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n",
++ name, osh, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, di->ddoffsetlow, di->dataoffsetlow));
++
+ /* allocate tx packet pointer vector */
+ if (ntxd) {
+ size = ntxd * sizeof (void*);
-+ if ((di->txp = MALLOC(osh, size)) == NULL)
++ if ((di->txp = MALLOC(osh, size)) == NULL) {
++ DMA_ERROR(("%s: dma_attach: out of tx memory, malloced %d bytes\n", di->name, MALLOCED(osh)));
+ goto fail;
++ }
+ bzero((char*)di->txp, size);
+ }
+
+ /* allocate rx packet pointer vector */
+ if (nrxd) {
+ size = nrxd * sizeof (void*);
-+ if ((di->rxp = MALLOC(osh, size)) == NULL)
++ if ((di->rxp = MALLOC(osh, size)) == NULL) {
++ DMA_ERROR(("%s: dma_attach: out of rx memory, malloced %d bytes\n", di->name, MALLOCED(osh)));
+ goto fail;
++ }
+ bzero((char*)di->rxp, size);
-+ }
++ }
+
-+ /* set message level */
-+ di->msg_level = msg_level ? msg_level : &dma_msg_level;
-+
-+ DMA_TRACE(("%s: dma_attach: drv %p osh %p regs %p ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, drv, osh, regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
-+
-+ /* make a private copy of our callers name */
-+ strncpy(di->name, name, MAXNAMEL);
-+ di->name[MAXNAMEL-1] = '\0';
-+
-+ di->drv = drv;
-+ di->osh = osh;
-+ di->regs = regs;
-+
-+ /* allocate transmit descriptor ring */
++ /* allocate transmit descriptor ring, only need ntxd descriptors but it must be aligned */
+ if (ntxd) {
-+ /* only need ntxd descriptors but it must be DMARINGALIGNed */
-+ size = ntxd * sizeof (dmadd_t);
-+ if (!ISALIGNED(DMA_CONSISTENT_ALIGN, DMARINGALIGN))
-+ size += DMARINGALIGN;
-+ if ((va = DMA_ALLOC_CONSISTENT(osh, size, &di->txdpa)) == NULL)
++ if (!dma_alloc(di, DMA_TX))
+ goto fail;
-+ di->txd = (dmadd_t*) ROUNDUP((uintptr)va, DMARINGALIGN);
-+ di->txdalign = (uint)((int8*)di->txd - (int8*)va);
-+ di->txdpa += di->txdalign;
-+ di->txdalloc = size;
-+ ASSERT(ISALIGNED((uintptr)di->txd, DMARINGALIGN));
-+ ASSERT(DMA_ADDRESSABLE(di->txdpa));
+ }
+
-+ /* allocate receive descriptor ring */
++ /* allocate receive descriptor ring, only need nrxd descriptors but it must be aligned */
+ if (nrxd) {
-+ /* only need nrxd descriptors but it must be DMARINGALIGNed */
-+ size = nrxd * sizeof (dmadd_t);
-+ if (!ISALIGNED(DMA_CONSISTENT_ALIGN, DMARINGALIGN))
-+ size += DMARINGALIGN;
-+ if ((va = DMA_ALLOC_CONSISTENT(osh, size, &di->rxdpa)) == NULL)
++ if (!dma_alloc(di, DMA_RX))
+ goto fail;
-+ di->rxd = (dmadd_t*) ROUNDUP((uintptr)va, DMARINGALIGN);
-+ di->rxdalign = (uint)((int8*)di->rxd - (int8*)va);
-+ di->rxdpa += di->rxdalign;
-+ di->rxdalloc = size;
-+ ASSERT(ISALIGNED((uintptr)di->rxd, DMARINGALIGN));
-+ ASSERT(DMA_ADDRESSABLE(di->rxdpa));
+ }
+
-+ /* save tunables */
-+ di->ntxd = ntxd;
-+ di->nrxd = nrxd;
-+ di->rxbufsize = rxbufsize;
-+ di->nrxpost = nrxpost;
-+ di->rxoffset = rxoffset;
-+ di->ddoffset = ddoffset;
-+ di->dataoffset = dataoffset;
++ if ((di->ddoffsetlow == SB_PCI_DMA) && (di->txdpa > SB_PCI_DMA_SZ) && !di->addrext) {
++ DMA_ERROR(("%s: dma_attach: txdpa 0x%lx: addrext not supported\n", di->name, di->txdpa));
++ goto fail;
++ }
++ if ((di->ddoffsetlow == SB_PCI_DMA) && (di->rxdpa > SB_PCI_DMA_SZ) && !di->addrext) {
++ DMA_ERROR(("%s: dma_attach: rxdpa 0x%lx: addrext not supported\n", di->name, di->rxdpa));
++ goto fail;
++ }
+
+ return ((void*)di);
+
+ return (NULL);
+}
+
++static bool
++dma_alloc(dma_info_t *di, uint direction)
++{
++ if (DMA64_ENAB(di)) {
++ return dma64_alloc(di, direction);
++ } else {
++ return dma32_alloc(di, direction);
++ }
++}
++
+/* may be called with core in reset */
+void
+dma_detach(dma_info_t *di)
+ ASSERT(di->rxin == di->rxout);
+
+ /* free dma descriptor rings */
-+ if (di->txd)
-+ DMA_FREE_CONSISTENT(di->osh, ((int8*)di->txd - di->txdalign),
-+ di->txdalloc, (di->txdpa - di->txdalign));
-+ if (di->rxd)
-+ DMA_FREE_CONSISTENT(di->osh, ((int8*)di->rxd - di->rxdalign),
-+ di->rxdalloc, (di->rxdpa - di->rxdalign));
++ if (di->txd32)
++ DMA_FREE_CONSISTENT(di->osh, ((int8*)di->txd32 - di->txdalign), di->txdalloc, (di->txdpa - di->txdalign));
++ if (di->rxd32)
++ DMA_FREE_CONSISTENT(di->osh, ((int8*)di->rxd32 - di->rxdalign), di->rxdalloc, (di->rxdpa - di->rxdalign));
+
+ /* free packet pointer vectors */
+ if (di->txp)
+ MFREE(di->osh, (void*)di, sizeof (dma_info_t));
+}
+
++/* return TRUE if this dma engine supports DmaExtendedAddrChanges, otherwise FALSE */
++static bool
++dma_isaddrext(dma_info_t *di)
++{
++ uint32 w;
++
++ if (DMA64_ENAB(di)) {
++ OR_REG(&di->d64txregs->control, D64_XC_AE);
++ w = R_REG(&di->d32txregs->control);
++ AND_REG(&di->d32txregs->control, ~D64_XC_AE);
++ return ((w & XC_AE) == D64_XC_AE);
++ } else {
++ OR_REG(&di->d32txregs->control, XC_AE);
++ w = R_REG(&di->d32txregs->control);
++ AND_REG(&di->d32txregs->control, ~XC_AE);
++ return ((w & XC_AE) == XC_AE);
++ }
++}
+
+void
+dma_txreset(dma_info_t *di)
+{
-+ uint32 status;
-+
+ DMA_TRACE(("%s: dma_txreset\n", di->name));
+
-+ /* suspend tx DMA first */
-+ W_REG(&di->regs->xmtcontrol, XC_SE);
-+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
-+ status != XS_XS_IDLE &&
-+ status != XS_XS_STOPPED,
-+ 10000);
-+
-+ W_REG(&di->regs->xmtcontrol, 0);
-+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
-+ 10000);
-+
-+ if (status != XS_XS_DISABLED) {
-+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
-+ }
-+
-+ /* wait for the last transaction to complete */
-+ OSL_DELAY(300);
++ if (DMA64_ENAB(di))
++ dma64_txreset(di);
++ else
++ dma32_txreset(di);
+}
+
+void
+dma_rxreset(dma_info_t *di)
+{
-+ uint32 status;
-+
+ DMA_TRACE(("%s: dma_rxreset\n", di->name));
+
-+ W_REG(&di->regs->rcvcontrol, 0);
-+ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
-+ 10000);
++ if (DMA64_ENAB(di))
++ dma64_rxreset(di);
++ else
++ dma32_rxreset(di);
++}
+
-+ if (status != RS_RS_DISABLED) {
-+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
++/* initialize descriptor table base address */
++static void
++dma_ddtable_init(dma_info_t *di, uint direction, ulong pa)
++{
++ if (DMA64_ENAB(di)) {
++ if (direction == DMA_TX) {
++ W_REG(&di->d64txregs->addrlow, pa + di->ddoffsetlow);
++ W_REG(&di->d64txregs->addrhigh, di->ddoffsethigh);
++ } else {
++ W_REG(&di->d64rxregs->addrlow, pa + di->ddoffsetlow);
++ W_REG(&di->d64rxregs->addrhigh, di->ddoffsethigh);
++ }
++ } else {
++ uint32 offset = di->ddoffsetlow;
++ if ((offset != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) {
++ if (direction == DMA_TX)
++ W_REG(&di->d32txregs->addr, (pa + offset));
++ else
++ W_REG(&di->d32rxregs->addr, (pa + offset));
++ } else {
++ /* dma32 address extension */
++ uint32 ae;
++ ASSERT(di->addrext);
++ ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT;
++
++ if (direction == DMA_TX) {
++ W_REG(&di->d32txregs->addr, ((pa & ~PCI32ADDR_HIGH) + offset));
++ SET_REG(&di->d32txregs->control, XC_AE, (ae << XC_AE_SHIFT));
++ } else {
++ W_REG(&di->d32rxregs->addr, ((pa & ~PCI32ADDR_HIGH) + offset));
++ SET_REG(&di->d32rxregs->control, RC_AE, (ae << RC_AE_SHIFT));
++ }
++ }
++ }
++}
++
++/* init the tx or rx descriptor */
++static INLINE void
++dma32_dd_upd(dma_info_t *di, dma32dd_t *ddring, ulong pa, uint outidx, uint32 *ctrl)
++{
++ uint offset = di->dataoffsetlow;
++
++ if ((offset != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) {
++ W_SM(&ddring[outidx].addr, BUS_SWAP32(pa + offset));
++ W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*ctrl));
++ } else {
++ /* address extension */
++ uint32 ae;
++ ASSERT(di->addrext);
++ ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT;
++
++ *ctrl |= (ae << CTRL_AE_SHIFT);
++ W_SM(&ddring[outidx].addr, BUS_SWAP32((pa & ~PCI32ADDR_HIGH) + offset));
++ W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*ctrl));
+ }
+}
+
++/* init the tx or rx descriptor */
++static INLINE void
++dma64_dd_upd(dma_info_t *di, dma64dd_t *ddring, ulong pa, uint outidx, uint32 *flags, uint32 bufcount)
++{
++ uint32 bufaddr_low = pa + di->dataoffsetlow;
++ uint32 bufaddr_high = 0 + di->dataoffsethigh;
++
++ uint32 ctrl2 = bufcount & D64_CTRL2_BC_MASK;
++
++ W_SM(&ddring[outidx].addrlow, BUS_SWAP32(bufaddr_low));
++ W_SM(&ddring[outidx].addrhigh, BUS_SWAP32(bufaddr_high));
++ W_SM(&ddring[outidx].ctrl1, BUS_SWAP32(*flags));
++ W_SM(&ddring[outidx].ctrl2, BUS_SWAP32(ctrl2));
++}
++
+void
+dma_txinit(dma_info_t *di)
+{
+ di->txavail = di->ntxd - 1;
+
+ /* clear tx descriptor ring */
-+ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
-+
-+ W_REG(&di->regs->xmtcontrol, XC_XE);
-+ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
++ if (DMA64_ENAB(di)) {
++ BZERO_SM((void*)di->txd64, (di->ntxd * sizeof (dma64dd_t)));
++ W_REG(&di->d64txregs->control, XC_XE);
++ dma_ddtable_init(di, DMA_TX, di->txdpa);
++ } else {
++ BZERO_SM((void*)di->txd32, (di->ntxd * sizeof (dma32dd_t)));
++ W_REG(&di->d32txregs->control, XC_XE);
++ dma_ddtable_init(di, DMA_TX, di->txdpa);
++ }
+}
+
+bool
+dma_txenabled(dma_info_t *di)
+{
+ uint32 xc;
-+
++
+ /* If the chip is dead, it is not enabled :-) */
-+ xc = R_REG(&di->regs->xmtcontrol);
-+ return ((xc != 0xffffffff) && (xc & XC_XE));
++ if (DMA64_ENAB(di)) {
++ xc = R_REG(&di->d64txregs->control);
++ return ((xc != 0xffffffff) && (xc & D64_XC_XE));
++ } else {
++ xc = R_REG(&di->d32txregs->control);
++ return ((xc != 0xffffffff) && (xc & XC_XE));
++ }
+}
+
+void
+dma_txsuspend(dma_info_t *di)
+{
+ DMA_TRACE(("%s: dma_txsuspend\n", di->name));
-+ OR_REG(&di->regs->xmtcontrol, XC_SE);
++ if (DMA64_ENAB(di))
++ OR_REG(&di->d64txregs->control, D64_XC_SE);
++ else
++ OR_REG(&di->d32txregs->control, XC_SE);
+}
+
+void
+dma_txresume(dma_info_t *di)
+{
+ DMA_TRACE(("%s: dma_txresume\n", di->name));
-+ AND_REG(&di->regs->xmtcontrol, ~XC_SE);
++ if (DMA64_ENAB(di))
++ AND_REG(&di->d64txregs->control, ~D64_XC_SE);
++ else
++ AND_REG(&di->d32txregs->control, ~XC_SE);
+}
+
+bool
-+dma_txsuspended(dma_info_t *di)
++dma_txsuspendedidle(dma_info_t *di)
+{
-+ if (!(R_REG(&di->regs->xmtcontrol) & XC_SE))
-+ return 0;
-+
-+ if ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) != XS_XS_IDLE)
-+ return 0;
-+
-+ OSL_DELAY(2);
-+ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_IDLE);
++ if (DMA64_ENAB(di))
++ return dma64_txsuspendedidle(di);
++ else
++ return dma32_txsuspendedidle(di);
+}
+
+bool
-+dma_txstopped(dma_info_t *di)
++dma_txsuspended(dma_info_t *di)
+{
-+ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++ if (DMA64_ENAB(di))
++ return ((R_REG(&di->d64txregs->control) & D64_XC_SE) == D64_XC_SE);
++ else
++ return ((R_REG(&di->d32txregs->control) & XC_SE) == XC_SE);
++}
++
++bool
++dma_txstopped(dma_info_t *di)
++{
++ if (DMA64_ENAB(di))
++ return ((R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK) == D64_XS0_XS_STOPPED);
++ else
++ return ((R_REG(&di->d32txregs->status) & XS_XS_MASK) == XS_XS_STOPPED);
+}
+
+bool
+dma_rxstopped(dma_info_t *di)
+{
-+ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++ if (DMA64_ENAB(di))
++ return ((R_REG(&di->d64rxregs->status0) & D64_RS0_RS_MASK) == D64_RS0_RS_STOPPED);
++ else
++ return ((R_REG(&di->d32rxregs->status) & RS_RS_MASK) == RS_RS_STOPPED);
+}
+
+void
+dma_fifoloopbackenable(dma_info_t *di)
+{
+ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
-+ OR_REG(&di->regs->xmtcontrol, XC_LE);
++ if (DMA64_ENAB(di))
++ OR_REG(&di->d64txregs->control, D64_XC_LE);
++ else
++ OR_REG(&di->d32txregs->control, XC_LE);
+}
+
+void
+ di->rxin = di->rxout = 0;
+
+ /* clear rx descriptor ring */
-+ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
-+
-+ dma_rxenable(di);
-+ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++ if (DMA64_ENAB(di)) {
++ BZERO_SM((void*)di->rxd64, (di->nrxd * sizeof (dma64dd_t)));
++ dma_rxenable(di);
++ dma_ddtable_init(di, DMA_RX, di->rxdpa);
++ } else {
++ BZERO_SM((void*)di->rxd32, (di->nrxd * sizeof (dma32dd_t)));
++ dma_rxenable(di);
++ dma_ddtable_init(di, DMA_RX, di->rxdpa);
++ }
+}
+
+void
+dma_rxenable(dma_info_t *di)
+{
+ DMA_TRACE(("%s: dma_rxenable\n", di->name));
-+ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
++ if (DMA64_ENAB(di))
++ W_REG(&di->d64rxregs->control, ((di->rxoffset << D64_RC_RO_SHIFT) | D64_RC_RE));
++ else
++ W_REG(&di->d32rxregs->control, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
+}
+
+bool
+{
+ uint32 rc;
+
-+ rc = R_REG(&di->regs->rcvcontrol);
-+ return ((rc != 0xffffffff) && (rc & RC_RE));
++ if (DMA64_ENAB(di)) {
++ rc = R_REG(&di->d64rxregs->control);
++ return ((rc != 0xffffffff) && (rc & D64_RC_RE));
++ } else {
++ rc = R_REG(&di->d32rxregs->control);
++ return ((rc != 0xffffffff) && (rc & RC_RE));
++ }
+}
+
-+/*
-+ * The BCM47XX family supports full 32bit dma engine buffer addressing so
-+ * dma buffers can cross 4 Kbyte page boundaries.
-+ */
++
++/* !! tx entry routine */
+int
+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
+{
++ if (DMA64_ENAB(di)) {
++ return dma64_txfast(di, p0, coreflags);
++ } else {
++ return dma32_txfast(di, p0, coreflags);
++ }
++}
++
++/* !! rx entry routine, returns a pointer to the next frame received, or NULL if there are no more */
++void*
++dma_rx(dma_info_t *di)
++{
++ void *p;
++ uint len;
++ int skiplen = 0;
++
++ while ((p = dma_getnextrxp(di, FALSE))) {
++ /* skip giant packets which span multiple rx descriptors */
++ if (skiplen > 0) {
++ skiplen -= di->rxbufsize;
++ if (skiplen < 0)
++ skiplen = 0;
++ PKTFREE(di->osh, p, FALSE);
++ continue;
++ }
++
++ len = ltoh16(*(uint16*)(PKTDATA(di->osh, p)));
++ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
++
++ /* bad frame length check */
++ if (len > (di->rxbufsize - di->rxoffset)) {
++ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
++ if (len > 0)
++ skiplen = len - (di->rxbufsize - di->rxoffset);
++ PKTFREE(di->osh, p, FALSE);
++ di->hnddma.rxgiants++;
++ continue;
++ }
++
++ /* set actual length */
++ PKTSETLEN(di->osh, p, (di->rxoffset + len));
++
++ break;
++ }
++
++ return (p);
++}
++
++/* post receive buffers */
++void
++dma_rxfill(dma_info_t *di)
++{
++ void *p;
++ uint rxin, rxout;
++ uint32 ctrl;
++ uint n;
++ uint i;
++ uint32 pa;
++ uint rxbufsize;
++
++ /*
++ * Determine how many receive buffers we're lacking
++ * from the full complement, allocate, initialize,
++ * and post them, then update the chip rx lastdscr.
++ */
++
++ rxin = di->rxin;
++ rxout = di->rxout;
++ rxbufsize = di->rxbufsize;
++
++ n = di->nrxpost - NRXDACTIVE(rxin, rxout);
++
++ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
++
++ for (i = 0; i < n; i++) {
++ if ((p = PKTGET(di->osh, rxbufsize, FALSE)) == NULL) {
++ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
++ di->hnddma.rxnobuf++;
++ break;
++ }
++
++ /* Do a cached write instead of uncached write since DMA_MAP
++ * will flush the cache. */
++ *(uint32*)(PKTDATA(di->osh, p)) = 0;
++
++ pa = (uint32) DMA_MAP(di->osh, PKTDATA(di->osh, p), rxbufsize, DMA_RX, p);
++ ASSERT(ISALIGNED(pa, 4));
++
++ /* save the free packet pointer */
++ ASSERT(di->rxp[rxout] == NULL);
++ di->rxp[rxout] = p;
++
++ if (DMA64_ENAB(di)) {
++ /* prep the descriptor control value */
++ if (rxout == (di->nrxd - 1))
++ ctrl = CTRL_EOT;
++
++ dma64_dd_upd(di, di->rxd64, pa, rxout, &ctrl, rxbufsize);
++ } else {
++ /* prep the descriptor control value */
++ ctrl = rxbufsize;
++ if (rxout == (di->nrxd - 1))
++ ctrl |= CTRL_EOT;
++ dma32_dd_upd(di, di->rxd32, pa, rxout, &ctrl);
++ }
++
++ rxout = NEXTRXD(rxout);
++ }
++
++ di->rxout = rxout;
++
++ /* update the chip lastdscr pointer */
++ if (DMA64_ENAB(di)) {
++ W_REG(&di->d64rxregs->ptr, I2B(rxout, dma64dd_t));
++ } else {
++ W_REG(&di->d32rxregs->ptr, I2B(rxout, dma32dd_t));
++ }
++}
++
++void
++dma_txreclaim(dma_info_t *di, bool forceall)
++{
++ void *p;
++
++ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
++
++ while ((p = dma_getnexttxp(di, forceall)))
++ PKTFREE(di->osh, p, TRUE);
++}
++
++/*
++ * Reclaim next completed txd (txds if using chained buffers) and
++ * return associated packet.
++ * If 'force' is true, reclaim txd(s) and return associated packet
++ * regardless of the value of the hardware "curr" pointer.
++ */
++void*
++dma_getnexttxp(dma_info_t *di, bool forceall)
++{
++ if (DMA64_ENAB(di)) {
++ return dma64_getnexttxp(di, forceall);
++ } else {
++ return dma32_getnexttxp(di, forceall);
++ }
++}
++
++/* like getnexttxp but no reclaim */
++void*
++dma_peeknexttxp(dma_info_t *di)
++{
++ uint end, i;
++
++ if (DMA64_ENAB(di)) {
++ end = B2I(R_REG(&di->d64txregs->status0) & D64_XS0_CD_MASK, dma64dd_t);
++ } else {
++ end = B2I(R_REG(&di->d32txregs->status) & XS_CD_MASK, dma32dd_t);
++ }
++
++ for (i = di->txin; i != end; i = NEXTTXD(i))
++ if (di->txp[i])
++ return (di->txp[i]);
++
++ return (NULL);
++}
++
++/*
++ * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin).
++ */
++void
++dma_txrotate(di_t *di)
++{
++ if (DMA64_ENAB(di)) {
++ dma64_txrotate(di);
++ } else {
++ dma32_txrotate(di);
++ }
++}
++
++void
++dma_rxreclaim(dma_info_t *di)
++{
++ void *p;
++
++ DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
++
++ while ((p = dma_getnextrxp(di, TRUE)))
++ PKTFREE(di->osh, p, FALSE);
++}
++
++void *
++dma_getnextrxp(dma_info_t *di, bool forceall)
++{
++ if (DMA64_ENAB(di)) {
++ return dma64_getnextrxp(di, forceall);
++ } else {
++ return dma32_getnextrxp(di, forceall);
++ }
++}
++
++uintptr
++dma_getvar(dma_info_t *di, char *name)
++{
++ if (!strcmp(name, "&txavail"))
++ return ((uintptr) &di->txavail);
++ else {
++ ASSERT(0);
++ }
++ return (0);
++}
++
++void
++dma_txblock(dma_info_t *di)
++{
++ di->txavail = 0;
++}
++
++void
++dma_txunblock(dma_info_t *di)
++{
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++}
++
++uint
++dma_txactive(dma_info_t *di)
++{
++ return (NTXDACTIVE(di->txin, di->txout));
++}
++
++void
++dma_rxpiomode(dma32regs_t *regs)
++{
++ W_REG(®s->control, RC_FM);
++}
++
++void
++dma_txpioloopback(dma32regs_t *regs)
++{
++ OR_REG(®s->control, XC_LE);
++}
++
++
++
++
++/*** 32 bits DMA non-inline functions ***/
++static bool
++dma32_alloc(dma_info_t *di, uint direction)
++{
++ uint size;
++ uint ddlen;
++ void *va;
++
++ ddlen = sizeof (dma32dd_t);
++
++ size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen);
++
++ if (!ISALIGNED(DMA_CONSISTENT_ALIGN, D32RINGALIGN))
++ size += D32RINGALIGN;
++
++
++ if (direction == DMA_TX) {
++ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa)) == NULL) {
++ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n", di->name));
++ return FALSE;
++ }
++
++ di->txd32 = (dma32dd_t*) ROUNDUP((uintptr)va, D32RINGALIGN);
++ di->txdalign = (uint)((int8*)di->txd32 - (int8*)va);
++ di->txdpa += di->txdalign;
++ di->txdalloc = size;
++ ASSERT(ISALIGNED((uintptr)di->txd32, D32RINGALIGN));
++ } else {
++ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa)) == NULL) {
++ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n", di->name));
++ return FALSE;
++ }
++ di->rxd32 = (dma32dd_t*) ROUNDUP((uintptr)va, D32RINGALIGN);
++ di->rxdalign = (uint)((int8*)di->rxd32 - (int8*)va);
++ di->rxdpa += di->rxdalign;
++ di->rxdalloc = size;
++ ASSERT(ISALIGNED((uintptr)di->rxd32, D32RINGALIGN));
++ }
++
++ return TRUE;
++}
++
++static void
++dma32_txreset(dma_info_t *di)
++{
++ uint32 status;
++
++ /* suspend tx DMA first */
++ W_REG(&di->d32txregs->control, XC_SE);
++ SPINWAIT((status = (R_REG(&di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED &&
++ status != XS_XS_IDLE &&
++ status != XS_XS_STOPPED,
++ 10000);
++
++ W_REG(&di->d32txregs->control, 0);
++ SPINWAIT((status = (R_REG(&di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED,
++ 10000);
++
++ if (status != XS_XS_DISABLED) {
++ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
++ }
++
++ /* wait for the last transaction to complete */
++ OSL_DELAY(300);
++}
++
++static void
++dma32_rxreset(dma_info_t *di)
++{
++ uint32 status;
++
++ W_REG(&di->d32rxregs->control, 0);
++ SPINWAIT((status = (R_REG(&di->d32rxregs->status) & RS_RS_MASK)) != RS_RS_DISABLED,
++ 10000);
++
++ if (status != RS_RS_DISABLED) {
++ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
++ }
++}
++
++static bool
++dma32_txsuspendedidle(dma_info_t *di)
++{
++ if (!(R_REG(&di->d32txregs->control) & XC_SE))
++ return 0;
++
++ if ((R_REG(&di->d32txregs->status) & XS_XS_MASK) != XS_XS_IDLE)
++ return 0;
++
++ OSL_DELAY(2);
++ return ((R_REG(&di->d32txregs->status) & XS_XS_MASK) == XS_XS_IDLE);
++}
++
++/*
++ * supports full 32bit dma engine buffer addressing so
++ * dma buffers can cross 4 Kbyte page boundaries.
++ */
++static int
++dma32_txfast(dma_info_t *di, void *p0, uint32 coreflags)
++{
+ void *p, *next;
+ uchar *data;
+ uint len;
+ uint txout;
+ uint32 ctrl;
-+ uint32 pa;
++ uint32 pa;
+
+ DMA_TRACE(("%s: dma_txfast\n", di->name));
+
+ * allocating and initializing transmit descriptor entries.
+ */
+ for (p = p0; p; p = next) {
-+ data = PKTDATA(di->drv, p);
-+ len = PKTLEN(di->drv, p);
-+ next = PKTNEXT(di->drv, p);
++ data = PKTDATA(di->osh, p);
++ len = PKTLEN(di->osh, p);
++ next = PKTNEXT(di->osh, p);
+
+ /* return nonzero if out of tx descriptors */
+ if (NEXTTXD(txout) == di->txin)
+
+ /* get physical address of buffer start */
+ pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p);
-+ ASSERT(DMA_ADDRESSABLE(pa));
+
+ /* build the descriptor control value */
+ ctrl = len & CTRL_BC_MASK;
+ if (txout == (di->ntxd - 1))
+ ctrl |= CTRL_EOT;
+
-+ /* init the tx descriptor */
-+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++ if (DMA64_ENAB(di)) {
++ dma64_dd_upd(di, di->txd64, pa, txout, &ctrl, len);
++ } else {
++ dma32_dd_upd(di, di->txd32, pa, txout, &ctrl);
++ }
+
+ ASSERT(di->txp[txout] == NULL);
+
+
+ /* if last txd eof not set, fix it */
+ if (!(ctrl & CTRL_EOF))
-+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++ W_SM(&di->txd32[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
+
+ /* save the packet */
+ di->txp[PREVTXD(txout)] = p0;
+ di->txout = txout;
+
+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(txout));
++ if (DMA64_ENAB(di)) {
++ W_REG(&di->d64txregs->ptr, I2B(txout, dma64dd_t));
++ } else {
++ W_REG(&di->d32txregs->ptr, I2B(txout, dma32dd_t));
++ }
+
+ /* tx flow control */
+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+ return (0);
+
-+outoftxd:
++ outoftxd:
+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
-+ PKTFREE(di->drv, p0, TRUE);
++ PKTFREE(di->osh, p0, TRUE);
+ di->txavail = 0;
+ di->hnddma.txnobuf++;
+ return (-1);
+}
+
-+#define PAGESZ 4096
-+#define PAGEBASE(x) ((uintptr)(x) & ~4095)
++static void*
++dma32_getnexttxp(dma_info_t *di, bool forceall)
++{
++ uint start, end, i;
++ void *txp;
++
++ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
++
++ txp = NULL;
++
++ start = di->txin;
++ if (forceall)
++ end = di->txout;
++ else
++ end = B2I(R_REG(&di->d32txregs->status) & XS_CD_MASK, dma32dd_t);
++
++ if ((start == 0) && (end > di->txout))
++ goto bogus;
++
++ for (i = start; i != end && !txp; i = NEXTTXD(i)) {
++ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd32[i].addr)) - di->dataoffsetlow),
++ (BUS_SWAP32(R_SM(&di->txd32[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
++
++ W_SM(&di->txd32[i].addr, 0xdeadbeef);
++ txp = di->txp[i];
++ di->txp[i] = NULL;
++ }
++
++ di->txin = i;
++
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++
++ return (txp);
+
++bogus:
+/*
-+ * Just like above except go through the extra effort of splitting
-+ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
-+ */
-+int
-+dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
-+{
-+ void *p, *next;
-+ uchar *data;
-+ uint plen, len;
-+ uchar *page, *start, *end;
-+ uint txout;
-+ uint32 ctrl;
-+ uint32 pa;
++ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
++ start, end, di->txout, forceall));
++*/
++ return (NULL);
++}
+
-+ DMA_TRACE(("%s: dma_tx\n", di->name));
++static void *
++dma32_getnextrxp(dma_info_t *di, bool forceall)
++{
++ uint i;
++ void *rxp;
+
-+ txout = di->txout;
-+ ctrl = 0;
++ /* if forcing, dma engine must be disabled */
++ ASSERT(!forceall || !dma_rxenabled(di));
+
-+ /*
-+ * Walk the chain of packet buffers
-+ * splitting those that cross 4 Kbyte boundaries
-+ * allocating and initializing transmit descriptor entries.
-+ */
-+ for (p = p0; p; p = next) {
-+ data = PKTDATA(di->drv, p);
-+ plen = PKTLEN(di->drv, p);
-+ next = PKTNEXT(di->drv, p);
++ i = di->rxin;
+
-+ if (plen == 0)
-+ continue;
++ /* return if no packets posted */
++ if (i == di->rxout)
++ return (NULL);
+
-+ for (page = (uchar*)PAGEBASE(data);
-+ page <= (uchar*)PAGEBASE(data + plen - 1);
-+ page += PAGESZ) {
++ /* ignore curr if forceall */
++ if (!forceall && (i == B2I(R_REG(&di->d32rxregs->status) & RS_CD_MASK, dma32dd_t)))
++ return (NULL);
+
-+ /* return nonzero if out of tx descriptors */
-+ if (NEXTTXD(txout) == di->txin)
-+ goto outoftxd;
++ /* get the packet pointer that corresponds to the rx descriptor */
++ rxp = di->rxp[i];
++ ASSERT(rxp);
++ di->rxp[i] = NULL;
+
-+ start = (page == (uchar*)PAGEBASE(data))? data: page;
-+ end = (page == (uchar*)PAGEBASE(data + plen))?
-+ (data + plen): (page + PAGESZ);
-+ len = (uint)(end - start);
++ /* clear this packet from the descriptor ring */
++ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd32[i].addr)) - di->dataoffsetlow),
++ di->rxbufsize, DMA_RX, rxp);
++ W_SM(&di->rxd32[i].addr, 0xdeadbeef);
+
-+ /* build the descriptor control value */
-+ ctrl = len & CTRL_BC_MASK;
++ di->rxin = NEXTRXD(i);
+
-+ ctrl |= coreflags;
++ return (rxp);
++}
+
-+ if ((p == p0) && (start == data))
-+ ctrl |= CTRL_SOF;
-+ if ((next == NULL) && (end == (data + plen)))
-+ ctrl |= (CTRL_IOC | CTRL_EOF);
-+ if (txout == (di->ntxd - 1))
-+ ctrl |= CTRL_EOT;
++static void
++dma32_txrotate(di_t *di)
++{
++ uint ad;
++ uint nactive;
++ uint rot;
++ uint old, new;
++ uint32 w;
++ uint first, last;
+
-+ /* get physical address of buffer start */
-+ pa = (uint32) DMA_MAP(di->osh, start, len, DMA_TX, p);
-+ ASSERT(DMA_ADDRESSABLE(pa));
++ ASSERT(dma_txsuspendedidle(di));
+
-+ /* init the tx descriptor */
-+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++ nactive = dma_txactive(di);
++ ad = B2I(((R_REG(&di->d32txregs->status) & XS_AD_MASK) >> XS_AD_SHIFT), dma32dd_t);
++ rot = TXD(ad - di->txin);
+
-+ ASSERT(di->txp[txout] == NULL);
++ ASSERT(rot < di->ntxd);
+
-+ txout = NEXTTXD(txout);
-+ }
++ /* full-ring case is a lot harder - don't worry about this */
++ if (rot >= (di->ntxd - nactive)) {
++ DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name));
++ return;
+ }
+
-+ /* if last txd eof not set, fix it */
-+ if (!(ctrl & CTRL_EOF))
-+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++ first = di->txin;
++ last = PREVTXD(di->txout);
+
-+ /* save the packet */
-+ di->txp[PREVTXD(txout)] = p0;
++ /* move entries starting at last and moving backwards to first */
++ for (old = last; old != PREVTXD(first); old = PREVTXD(old)) {
++ new = TXD(old + rot);
+
-+ /* bump the tx descriptor index */
-+ di->txout = txout;
++ /*
++ * Move the tx dma descriptor.
++ * EOT is set only in the last entry in the ring.
++ */
++ w = R_SM(&di->txd32[old].ctrl) & ~CTRL_EOT;
++ if (new == (di->ntxd - 1))
++ w |= CTRL_EOT;
++ W_SM(&di->txd32[new].ctrl, w);
++ W_SM(&di->txd32[new].addr, R_SM(&di->txd32[old].addr));
+
-+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(txout));
++ /* zap the old tx dma descriptor address field */
++ W_SM(&di->txd32[old].addr, 0xdeadbeef);
+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++ /* move the corresponding txp[] entry */
++ ASSERT(di->txp[new] == NULL);
++ di->txp[new] = di->txp[old];
++ di->txp[old] = NULL;
++ }
+
-+ return (0);
++ /* update txin and txout */
++ di->txin = ad;
++ di->txout = TXD(di->txout + rot);
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
-+outoftxd:
-+ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
-+ PKTFREE(di->drv, p0, TRUE);
-+ di->txavail = 0;
-+ di->hnddma.txnobuf++;
-+ return (-1);
++ /* kick the chip */
++ W_REG(&di->d32txregs->ptr, I2B(di->txout, dma32dd_t));
+}
+
-+/* returns a pointer to the next frame received, or NULL if there are no more */
-+void*
-+dma_rx(dma_info_t *di)
++/*** 64 bits DMA non-inline functions ***/
++
++#ifdef BCMDMA64
++
++static bool
++dma64_alloc(dma_info_t *di, uint direction)
+{
-+ void *p;
-+ uint len;
-+ int skiplen = 0;
++ uint size;
++ uint ddlen;
++ uint32 alignbytes;
++ void *va;
+
-+ while ((p = dma_getnextrxp(di, FALSE))) {
-+ /* skip giant packets which span multiple rx descriptors */
-+ if (skiplen > 0) {
-+ skiplen -= di->rxbufsize;
-+ if (skiplen < 0)
-+ skiplen = 0;
-+ PKTFREE(di->drv, p, FALSE);
-+ continue;
-+ }
++ ddlen = sizeof (dma64dd_t);
+
-+ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
-+ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
++ size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen);
+
-+ /* bad frame length check */
-+ if (len > (di->rxbufsize - di->rxoffset)) {
-+ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
-+ if (len > 0)
-+ skiplen = len - (di->rxbufsize - di->rxoffset);
-+ PKTFREE(di->drv, p, FALSE);
-+ di->hnddma.rxgiants++;
-+ continue;
++ alignbytes = di->dma64align;
++
++ if (!ISALIGNED(DMA_CONSISTENT_ALIGN, alignbytes))
++ size += alignbytes;
++
++
++ if (direction == DMA_TX) {
++ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa)) == NULL) {
++ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n", di->name));
++ return FALSE;
+ }
+
-+ /* set actual length */
-+ PKTSETLEN(di->drv, p, (di->rxoffset + len));
++ di->txd64 = (dma64dd_t*) ROUNDUP((uintptr)va, alignbytes);
++ di->txdalign = (uint)((int8*)di->txd64 - (int8*)va);
++ di->txdpa += di->txdalign;
++ di->txdalloc = size;
++ ASSERT(ISALIGNED((uintptr)di->txd64, alignbytes));
++ } else {
++ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa)) == NULL) {
++ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n", di->name));
++ return FALSE;
++ }
++ di->rxd64 = (dma64dd_t*) ROUNDUP((uintptr)va, alignbytes);
++ di->rxdalign = (uint)((int8*)di->rxd64 - (int8*)va);
++ di->rxdpa += di->rxdalign;
++ di->rxdalloc = size;
++ ASSERT(ISALIGNED((uintptr)di->rxd64, alignbytes));
++ }
+
-+ break;
++ return TRUE;
++}
++
++static void
++dma64_txreset(dma_info_t *di)
++{
++ uint32 status;
++
++ /* suspend tx DMA first */
++ W_REG(&di->d64txregs->control, D64_XC_SE);
++ SPINWAIT((status = (R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK)) != D64_XS0_XS_DISABLED &&
++ status != D64_XS0_XS_IDLE &&
++ status != D64_XS0_XS_STOPPED,
++ 10000);
++
++ W_REG(&di->d64txregs->control, 0);
++ SPINWAIT((status = (R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK)) != D64_XS0_XS_DISABLED,
++ 10000);
++
++ if (status != D64_XS0_XS_DISABLED) {
++ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
+ }
+
-+ return (p);
++ /* wait for the last transaction to complete */
++ OSL_DELAY(300);
+}
+
-+/* post receive buffers */
-+void
-+dma_rxfill(dma_info_t *di)
++static void
++dma64_rxreset(dma_info_t *di)
+{
-+ void *p;
-+ uint rxin, rxout;
-+ uint ctrl;
-+ uint n;
-+ uint i;
-+ uint32 pa;
-+ uint rxbufsize;
++ uint32 status;
+
-+ /*
-+ * Determine how many receive buffers we're lacking
-+ * from the full complement, allocate, initialize,
-+ * and post them, then update the chip rx lastdscr.
-+ */
++ W_REG(&di->d64rxregs->control, 0);
++ SPINWAIT((status = (R_REG(&di->d64rxregs->status0) & D64_RS0_RS_MASK)) != D64_RS0_RS_DISABLED,
++ 10000);
+
-+ rxin = di->rxin;
-+ rxout = di->rxout;
-+ rxbufsize = di->rxbufsize;
++ if (status != D64_RS0_RS_DISABLED) {
++ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
++ }
++}
+
-+ n = di->nrxpost - NRXDACTIVE(rxin, rxout);
++static bool
++dma64_txsuspendedidle(dma_info_t *di)
++{
+
-+ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
++ if (!(R_REG(&di->d64txregs->control) & D64_XC_SE))
++ return 0;
++
++ if ((R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK) == D64_XS0_XS_IDLE)
++ return 1;
+
-+ for (i = 0; i < n; i++) {
-+ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
-+ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
-+ di->hnddma.rxnobuf++;
-+ break;
-+ }
++ return 0;
++}
++
++/*
++ * supports full 32bit dma engine buffer addressing so
++ * dma buffers can cross 4 Kbyte page boundaries.
++ */
++static int
++dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags)
++{
++ void *p, *next;
++ uchar *data;
++ uint len;
++ uint txout;
++ uint32 flags;
++ uint32 pa;
+
-+ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
++ DMA_TRACE(("%s: dma_txfast\n", di->name));
+
-+ pa = (uint32) DMA_MAP(di->osh, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
-+ ASSERT(ISALIGNED(pa, 4));
-+ ASSERT(DMA_ADDRESSABLE(pa));
++ txout = di->txout;
++ flags = 0;
+
-+ /* save the free packet pointer */
-+ ASSERT(di->rxp[rxout] == NULL);
-+ di->rxp[rxout] = p;
++ /*
++ * Walk the chain of packet buffers
++ * allocating and initializing transmit descriptor entries.
++ */
++ for (p = p0; p; p = next) {
++ data = PKTDATA(di->osh, p);
++ len = PKTLEN(di->osh, p);
++ next = PKTNEXT(di->osh, p);
+
-+ /* prep the descriptor control value */
-+ ctrl = rxbufsize;
-+ if (rxout == (di->nrxd - 1))
-+ ctrl |= CTRL_EOT;
++ /* return nonzero if out of tx descriptors */
++ if (NEXTTXD(txout) == di->txin)
++ goto outoftxd;
++
++ if (len == 0)
++ continue;
++
++ /* get physical address of buffer start */
++ pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p);
++
++ flags = coreflags;
++
++ if (p == p0)
++ flags |= D64_CTRL1_SOF;
++ if (next == NULL)
++ flags |= (D64_CTRL1_IOC | D64_CTRL1_EOF);
++ if (txout == (di->ntxd - 1))
++ flags |= D64_CTRL1_EOT;
++
++ dma64_dd_upd(di, di->txd64, pa, txout, &flags, len);
+
-+ /* init the rx descriptor */
-+ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
++ ASSERT(di->txp[txout] == NULL);
+
-+ rxout = NEXTRXD(rxout);
++ txout = NEXTTXD(txout);
+ }
+
-+ di->rxout = rxout;
++ /* if last txd eof not set, fix it */
++ if (!(flags & D64_CTRL1_EOF))
++ W_SM(&di->txd64[PREVTXD(txout)].ctrl1, BUS_SWAP32(flags | D64_CTRL1_IOC | D64_CTRL1_EOF));
+
-+ /* update the chip lastdscr pointer */
-+ W_REG(&di->regs->rcvptr, I2B(rxout));
-+}
++ /* save the packet */
++ di->txp[PREVTXD(txout)] = p0;
+
-+void
-+dma_txreclaim(dma_info_t *di, bool forceall)
-+{
-+ void *p;
++ /* bump the tx descriptor index */
++ di->txout = txout;
+
-+ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
++ /* kick the chip */
++ W_REG(&di->d64txregs->ptr, I2B(txout, dma64dd_t));
+
-+ while ((p = dma_getnexttxp(di, forceall)))
-+ PKTFREE(di->drv, p, TRUE);
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++
++ return (0);
++
++outoftxd:
++ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
++ PKTFREE(di->osh, p0, TRUE);
++ di->txavail = 0;
++ di->hnddma.txnobuf++;
++ return (-1);
+}
+
-+/*
-+ * Reclaim next completed txd (txds if using chained buffers) and
-+ * return associated packet.
-+ * If 'force' is true, reclaim txd(s) and return associated packet
-+ * regardless of the value of the hardware "curr" pointer.
-+ */
-+void*
-+dma_getnexttxp(dma_info_t *di, bool forceall)
++static void*
++dma64_getnexttxp(dma_info_t *di, bool forceall)
+{
+ uint start, end, i;
+ void *txp;
+ if (forceall)
+ end = di->txout;
+ else
-+ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
++ end = B2I(R_REG(&di->d64txregs->status0) & D64_XS0_CD_MASK, dma64dd_t);
+
+ if ((start == 0) && (end > di->txout))
+ goto bogus;
+
+ for (i = start; i != end && !txp; i = NEXTTXD(i)) {
-+ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
-+ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
-+ W_SM(&di->txd[i].addr, 0xdeadbeef);
++ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd64[i].addrlow)) - di->dataoffsetlow),
++ (BUS_SWAP32(R_SM(&di->txd64[i].ctrl2)) & D64_CTRL2_BC_MASK), DMA_TX, di->txp[i]);
++
++ W_SM(&di->txd64[i].addrlow, 0xdeadbeef);
++ W_SM(&di->txd64[i].addrhigh, 0xdeadbeef);
++
+ txp = di->txp[i];
+ di->txp[i] = NULL;
+ }
+ return (NULL);
+}
+
-+/* like getnexttxp but no reclaim */
-+void*
-+dma_peeknexttxp(dma_info_t *di)
-+{
-+ uint end, i;
-+
-+ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
-+
-+ for (i = di->txin; i != end; i = NEXTTXD(i))
-+ if (di->txp[i])
-+ return (di->txp[i]);
-+
-+ return (NULL);
-+}
-+
-+void
-+dma_rxreclaim(dma_info_t *di)
-+{
-+ void *p;
-+
-+ DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
-+
-+ while ((p = dma_getnextrxp(di, TRUE)))
-+ PKTFREE(di->drv, p, FALSE);
-+}
-+
-+void *
-+dma_getnextrxp(dma_info_t *di, bool forceall)
++static void *
++dma64_getnextrxp(dma_info_t *di, bool forceall)
+{
+ uint i;
+ void *rxp;
+ return (NULL);
+
+ /* ignore curr if forceall */
-+ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
++ if (!forceall && (i == B2I(R_REG(&di->d64rxregs->status0) & D64_RS0_CD_MASK, dma64dd_t)))
+ return (NULL);
+
+ /* get the packet pointer that corresponds to the rx descriptor */
+ di->rxp[i] = NULL;
+
+ /* clear this packet from the descriptor ring */
-+ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
++ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd64[i].addrlow)) - di->dataoffsetlow),
+ di->rxbufsize, DMA_RX, rxp);
-+ W_SM(&di->rxd[i].addr, 0xdeadbeef);
++
++ W_SM(&di->rxd64[i].addrlow, 0xdeadbeef);
++ W_SM(&di->rxd64[i].addrhigh, 0xdeadbeef);
+
+ di->rxin = NEXTRXD(i);
+
+ return (rxp);
+}
+
-+
-+uintptr
-+dma_getvar(dma_info_t *di, char *name)
-+{
-+ if (!strcmp(name, "&txavail"))
-+ return ((uintptr) &di->txavail);
-+ else {
-+ ASSERT(0);
-+ }
-+ return (0);
-+}
-+
-+void
-+dma_txblock(dma_info_t *di)
-+{
-+ di->txavail = 0;
-+}
-+
-+void
-+dma_txunblock(dma_info_t *di)
-+{
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+}
-+
-+uint
-+dma_txactive(dma_info_t *di)
-+{
-+ return (NTXDACTIVE(di->txin, di->txout));
-+}
-+
-+/*
-+ * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin).
-+ */
-+void
-+dma_txrotate(di_t *di)
++static void
++dma64_txrotate(di_t *di)
+{
+ uint ad;
+ uint nactive;
+ uint32 w;
+ uint first, last;
+
-+ ASSERT(dma_txsuspended(di));
++ ASSERT(dma_txsuspendedidle(di));
+
+ nactive = dma_txactive(di);
-+ ad = B2I((R_REG(&di->regs->xmtstatus) & XS_AD_MASK) >> XS_AD_SHIFT);
++ ad = B2I((R_REG(&di->d64txregs->status1) & D64_XS1_AD_MASK), dma64dd_t);
+ rot = TXD(ad - di->txin);
+
+ ASSERT(rot < di->ntxd);
+ * Move the tx dma descriptor.
+ * EOT is set only in the last entry in the ring.
+ */
-+ w = R_SM(&di->txd[old].ctrl) & ~CTRL_EOT;
++ w = R_SM(&di->txd64[old].ctrl1) & ~D64_CTRL1_EOT;
+ if (new == (di->ntxd - 1))
-+ w |= CTRL_EOT;
-+ W_SM(&di->txd[new].ctrl, w);
-+ W_SM(&di->txd[new].addr, R_SM(&di->txd[old].addr));
++ w |= D64_CTRL1_EOT;
++ W_SM(&di->txd64[new].ctrl1, w);
++
++ w = R_SM(&di->txd64[old].ctrl2);
++ W_SM(&di->txd64[new].ctrl2, w);
++
++ W_SM(&di->txd64[new].addrlow, R_SM(&di->txd64[old].addrlow));
++ W_SM(&di->txd64[new].addrhigh, R_SM(&di->txd64[old].addrhigh));
+
+ /* zap the old tx dma descriptor address field */
-+ W_SM(&di->txd[old].addr, 0xdeadbeef);
++ W_SM(&di->txd64[old].addrlow, 0xdeadbeef);
++ W_SM(&di->txd64[old].addrhigh, 0xdeadbeef);
+
+ /* move the corresponding txp[] entry */
+ ASSERT(di->txp[new] == NULL);
+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(di->txout));
++ W_REG(&di->d64txregs->ptr, I2B(di->txout, dma64dd_t));
+}
-diff -Nur linux-2.4.30/drivers/net/hnd/linux_osl.c linux-2.4.30-brcm/drivers/net/hnd/linux_osl.c
---- linux-2.4.30/drivers/net/hnd/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/linux_osl.c 2005-05-22 23:01:31.000000000 +0200
-@@ -0,0 +1,640 @@
++
++#endif
++
+diff -urN linux.old/drivers/net/hnd/linux_osl.c linux.dev/drivers/net/hnd/linux_osl.c
+--- linux.old/drivers/net/hnd/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/linux_osl.c 2005-11-07 23:38:26.782893500 +0100
+@@ -0,0 +1,708 @@
+/*
+ * Linux OS Independent Layer
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+#include <bcmendian.h>
+#include <linux/module.h>
+#include <linuxver.h>
-+#include <linux_osl.h>
++#include <osl.h>
+#include <bcmutils.h>
+#include <linux/delay.h>
+#ifdef mips
+ char file[BCM_MEM_FILENAME_LEN];
+} bcm_mem_link_t;
+
-+typedef struct os_handle {
++struct os_handle {
+ uint magic;
+ void *pdev;
+ uint malloced;
+ uint failed;
+ bcm_mem_link_t *dbgmem_list;
-+} os_handle_t;
++};
+
-+void *
++static int16 linuxbcmerrormap[] = \
++{ 0, /* 0 */
++ -EINVAL, /* BCME_ERROR */
++ -EINVAL, /* BCME_BADARG*/
++ -EINVAL, /* BCME_BADOPTION*/
++ -EINVAL, /* BCME_NOTUP */
++ -EINVAL, /* BCME_NOTDOWN */
++ -EINVAL, /* BCME_NOTAP */
++ -EINVAL, /* BCME_NOTSTA */
++ -EINVAL, /* BCME_BADKEYIDX */
++ -EINVAL, /* BCME_RADIOOFF */
++ -EINVAL, /* BCME_NOTBANDLOCKED */
++ -EINVAL, /* BCME_NOCLK */
++ -EINVAL, /* BCME_BADRATESET */
++ -EINVAL, /* BCME_BADBAND */
++ -E2BIG, /* BCME_BUFTOOSHORT */
++ -E2BIG, /* BCME_BUFTOOLONG */
++ -EBUSY, /* BCME_BUSY */
++ -EINVAL, /* BCME_NOTASSOCIATED */
++ -EINVAL, /* BCME_BADSSIDLEN */
++ -EINVAL, /* BCME_OUTOFRANGECHAN */
++ -EINVAL, /* BCME_BADCHAN */
++ -EFAULT, /* BCME_BADADDR */
++ -ENOMEM, /* BCME_NORESOURCE */
++ -EOPNOTSUPP, /* BCME_UNSUPPORTED */
++ -EMSGSIZE, /* BCME_BADLENGTH */
++ -EINVAL, /* BCME_NOTREADY */
++ -EPERM, /* BCME_NOTPERMITTED */
++ -ENOMEM, /* BCME_NOMEM */
++ -EINVAL, /* BCME_ASSOCIATED */
++ -ERANGE, /* BCME_RANGE */
++ -EINVAL /* BCME_NOTFOUND */
++};
++
++/* translate bcmerrors into linux errors*/
++int
++osl_error(int bcmerror)
++{
++ int abs_bcmerror;
++ int array_size = ARRAYSIZE(linuxbcmerrormap);
++
++ abs_bcmerror = ABS(bcmerror);
++
++ if (bcmerror > 0)
++ abs_bcmerror = 0;
++
++ else if (abs_bcmerror >= array_size)
++ abs_bcmerror = BCME_ERROR;
++
++ return linuxbcmerrormap[abs_bcmerror];
++}
++
++osl_t *
+osl_attach(void *pdev)
+{
-+ os_handle_t *osh;
++ osl_t *osh;
+
-+ osh = kmalloc(sizeof(os_handle_t), GFP_ATOMIC);
++ osh = kmalloc(sizeof(osl_t), GFP_ATOMIC);
+ ASSERT(osh);
+
++ /*
++ * check the cases where
++ * 1.Error code Added to bcmerror table, but forgot to add it to the OS
++ * dependent error code
++ * 2. Error code is added to the bcmerror table, but forgot to add the
++ * corresponding errorstring(dummy call to bcmerrorstr)
++ */
++ bcmerrorstr(0);
++ ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(linuxbcmerrormap) - 1));
++
+ osh->magic = OS_HANDLE_MAGIC;
+ osh->malloced = 0;
+ osh->failed = 0;
+}
+
+void
-+osl_detach(void *osh)
++osl_detach(osl_t *osh)
+{
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
++ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC));
+ kfree(osh);
+}
+
+void*
-+osl_pktget(void *drv, uint len, bool send)
++osl_pktget(osl_t *osh, uint len, bool send)
+{
+ struct sk_buff *skb;
+
+}
+
+uint32
-+osl_pci_read_config(void *osh, uint offset, uint size)
++osl_pci_read_config(osl_t *osh, uint offset, uint size)
+{
-+ struct pci_dev *pdev;
+ uint val;
+ uint retry=PCI_CFG_RETRY;
+
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+ /* only 4byte access supported */
+ ASSERT(size == 4);
+
-+ pdev = ((os_handle_t *)osh)->pdev;
+ do {
-+ pci_read_config_dword(pdev, offset, &val);
++ pci_read_config_dword(osh->pdev, offset, &val);
+ if (val != 0xffffffff)
+ break;
+ } while (retry--);
+}
+
+void
-+osl_pci_write_config(void *osh, uint offset, uint size, uint val)
++osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
+{
-+ struct pci_dev *pdev;
+ uint retry=PCI_CFG_RETRY;
+
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+ /* only 4byte access supported */
+ ASSERT(size == 4);
+
-+ pdev = ((os_handle_t *)osh)->pdev;
-+
+ do {
-+ pci_write_config_dword(pdev, offset, val);
++ pci_write_config_dword(osh->pdev, offset, val);
+ if (offset!=PCI_BAR0_WIN)
+ break;
+ if (osl_pci_read_config(osh,offset,size) == val)
+
+}
+
++/* return bus # for the pci device pointed by osh->pdev */
++uint
++osl_pci_bus(osl_t *osh)
++{
++ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev);
++
++ return ((struct pci_dev *)osh->pdev)->bus->number;
++}
++
++/* return slot # for the pci device pointed by osh->pdev */
++uint
++osl_pci_slot(osl_t *osh)
++{
++ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev);
++
++ return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn);
++}
++
+static void
-+osl_pcmcia_attr(void *osh, uint offset, char *buf, int size, bool write)
++osl_pcmcia_attr(osl_t *osh, uint offset, char *buf, int size, bool write)
+{
+}
+
+void
-+osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
++osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size)
+{
+ osl_pcmcia_attr(osh, offset, (char *) buf, size, FALSE);
+}
+
+void
-+osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
++osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size)
+{
+ osl_pcmcia_attr(osh, offset, (char *) buf, size, TRUE);
+}
+#ifdef BCMDBG_MEM
+
+void*
-+osl_debug_malloc(void *osh, uint size, int line, char* file)
++osl_debug_malloc(osl_t *osh, uint size, int line, char* file)
+{
+ bcm_mem_link_t *p;
+ char* basename;
-+ os_handle_t *h = (os_handle_t *)osh;
-+
-+ if (size == 0) {
-+ return NULL;
-+ }
++
++ ASSERT(size);
+
-+ p = (bcm_mem_link_t*)osl_malloc(osh, sizeof(bcm_mem_link_t) + size);
-+ if (p == NULL)
-+ return p;
++ if ((p = (bcm_mem_link_t*)osl_malloc(osh, sizeof(bcm_mem_link_t) + size)) == NULL)
++ return (NULL);
+
+ p->size = size;
+ p->line = line;
+
+ /* link this block */
+ p->prev = NULL;
-+ p->next = h->dbgmem_list;
++ p->next = osh->dbgmem_list;
+ if (p->next)
+ p->next->prev = p;
-+ h->dbgmem_list = p;
++ osh->dbgmem_list = p;
+
+ return p + 1;
+}
+
+void
-+osl_debug_mfree(void *osh, void *addr, uint size, int line, char* file)
++osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file)
+{
+ bcm_mem_link_t *p = (bcm_mem_link_t *)((int8*)addr - sizeof(bcm_mem_link_t));
-+ os_handle_t *h = (os_handle_t *)osh;
+
-+ ASSERT((h && (h->magic == OS_HANDLE_MAGIC)));
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+ if (p->size == 0) {
+ printk("osl_debug_mfree: double free on addr 0x%x size %d at line %d file %s\n",
+ (uint)addr, size, line, file);
++ ASSERT(p->size);
+ return;
+ }
+
+ if (p->size != size) {
+ printk("osl_debug_mfree: dealloc size %d does not match alloc size %d on addr 0x%x at line %d file %s\n",
+ size, p->size, (uint)addr, line, file);
++ ASSERT(p->size == size);
+ return;
+ }
+
+ p->prev->next = p->next;
+ if (p->next)
+ p->next->prev = p->prev;
-+ if (h->dbgmem_list == p)
-+ h->dbgmem_list = p->next;
++ if (osh->dbgmem_list == p)
++ osh->dbgmem_list = p->next;
+ p->next = p->prev = NULL;
+
+ osl_mfree(osh, p, size + sizeof(bcm_mem_link_t));
+}
+
+char*
-+osl_debug_memdump(void *osh, char *buf, uint sz)
++osl_debug_memdump(osl_t *osh, char *buf, uint sz)
+{
+ bcm_mem_link_t *p;
+ char *obuf;
-+ os_handle_t *h = (os_handle_t *)osh;
-+
-+ ASSERT((h && (h->magic == OS_HANDLE_MAGIC)));
++
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ obuf = buf;
+
+ buf += sprintf(buf, " Address\tSize\tFile:line\n");
-+ for (p = h->dbgmem_list; p && ((buf - obuf) < (sz - 128)); p = p->next)
++ for (p = osh->dbgmem_list; p && ((buf - obuf) < (sz - 128)); p = p->next)
+ buf += sprintf(buf, "0x%08x\t%5d\t%s:%d\n",
+ (int)p + sizeof(bcm_mem_link_t), p->size, p->file, p->line);
+
+#endif /* BCMDBG_MEM */
+
+void*
-+osl_malloc(void *osh, uint size)
++osl_malloc(osl_t *osh, uint size)
+{
-+ os_handle_t *h = (os_handle_t *)osh;
+ void *addr;
++
++ /* only ASSERT if osh is defined */
++ if (osh)
++ ASSERT(osh->magic == OS_HANDLE_MAGIC);
+
-+ ASSERT((h && (h->magic == OS_HANDLE_MAGIC)));
-+ h->malloced += size;
-+ addr = kmalloc(size, GFP_ATOMIC);
-+ if (!addr)
-+ h->failed++;
++ if ((addr = kmalloc(size, GFP_ATOMIC)) == NULL) {
++ if(osh)
++ osh->failed++;
++ return (NULL);
++ }
++ if (osh)
++ osh->malloced += size;
++
+ return (addr);
+}
+
+void
-+osl_mfree(void *osh, void *addr, uint size)
++osl_mfree(osl_t *osh, void *addr, uint size)
+{
-+ os_handle_t *h = (os_handle_t *)osh;
-+
-+ ASSERT((h && (h->magic == OS_HANDLE_MAGIC)));
-+ h->malloced -= size;
++ if (osh) {
++ ASSERT(osh->magic == OS_HANDLE_MAGIC);
++ osh->malloced -= size;
++ }
+ kfree(addr);
+}
+
+uint
-+osl_malloced(void *osh)
++osl_malloced(osl_t *osh)
+{
-+ os_handle_t *h = (os_handle_t *)osh;
-+
-+ ASSERT((h && (h->magic == OS_HANDLE_MAGIC)));
-+ return (h->malloced);
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
++ return (osh->malloced);
+}
+
-+uint osl_malloc_failed(void *osh)
++uint osl_malloc_failed(osl_t *osh)
+{
-+ os_handle_t *h = (os_handle_t *)osh;
-+
-+ ASSERT((h && (h->magic == OS_HANDLE_MAGIC)));
-+ return (h->failed);
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
++ return (osh->failed);
+}
+
+void*
-+osl_dma_alloc_consistent(void *osh, uint size, ulong *pap)
++osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap)
+{
-+ struct pci_dev *dev;
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
-+
-+ dev = ((os_handle_t *)osh)->pdev;
-+ return (pci_alloc_consistent(dev, size, (dma_addr_t*)pap));
++ return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap));
+}
+
+void
-+osl_dma_free_consistent(void *osh, void *va, uint size, ulong pa)
++osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa)
+{
-+ struct pci_dev *dev;
-+
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
-+ dev = ((os_handle_t *)osh)->pdev;
-+ pci_free_consistent(dev, size, va, (dma_addr_t)pa);
++ pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa);
+}
+
+uint
-+osl_dma_map(void *osh, void *va, uint size, int direction)
++osl_dma_map(osl_t *osh, void *va, uint size, int direction)
+{
+ int dir;
-+ struct pci_dev *dev;
-+
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
-+
-+ dev = ((os_handle_t *)osh)->pdev;
++
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+ return (pci_map_single(dev, va, size, dir));
++ return (pci_map_single(osh->pdev, va, size, dir));
+}
+
+void
-+osl_dma_unmap(void *osh, uint pa, uint size, int direction)
++osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction)
+{
+ int dir;
-+ struct pci_dev *dev;
-+
-+ ASSERT((osh && (((os_handle_t *)osh)->magic == OS_HANDLE_MAGIC)));
-+
-+ dev = ((os_handle_t *)osh)->pdev;
++
++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+ pci_unmap_single(dev, (uint32)pa, size, dir);
++ pci_unmap_single(osh->pdev, (uint32)pa, size, dir);
+}
+
+#if defined(BINOSL)
+}
+#endif /* BCMDBG || BINOSL */
+
++void
++osl_delay(uint usec)
++{
++ uint d;
++
++ while (usec > 0) {
++ d = MIN(usec, 1000);
++ udelay(d);
++ usec -= d;
++ }
++}
++
+/*
+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
+ */
+}
+
+int
-+osl_strlen(char *s)
++osl_strlen(const char *s)
+{
+ return (strlen(s));
+}
+#endif
+}
+
-+void
-+osl_delay(uint usec)
-+{
-+ udelay(usec);
-+}
-+
+uchar*
-+osl_pktdata(void *drv, void *skb)
++osl_pktdata(osl_t *osh, void *skb)
+{
+ return (((struct sk_buff*)skb)->data);
+}
+
+uint
-+osl_pktlen(void *drv, void *skb)
++osl_pktlen(osl_t *osh, void *skb)
+{
+ return (((struct sk_buff*)skb)->len);
+}
+
+uint
-+osl_pktheadroom(void *drv, void *skb)
++osl_pktheadroom(osl_t *osh, void *skb)
+{
+ return (uint) skb_headroom((struct sk_buff *) skb);
+}
+
+uint
-+osl_pkttailroom(void *drv, void *skb)
++osl_pkttailroom(osl_t *osh, void *skb)
+{
+ return (uint) skb_tailroom((struct sk_buff *) skb);
+}
+
+void*
-+osl_pktnext(void *drv, void *skb)
++osl_pktnext(osl_t *osh, void *skb)
+{
+ return (((struct sk_buff*)skb)->next);
+}
+}
+
+void
-+osl_pktsetlen(void *drv, void *skb, uint len)
++osl_pktsetlen(osl_t *osh, void *skb, uint len)
+{
+ __skb_trim((struct sk_buff*)skb, len);
+}
+
+uchar*
-+osl_pktpush(void *drv, void *skb, int bytes)
++osl_pktpush(osl_t *osh, void *skb, int bytes)
+{
+ return (skb_push((struct sk_buff*)skb, bytes));
+}
+
+uchar*
-+osl_pktpull(void *drv, void *skb, int bytes)
++osl_pktpull(osl_t *osh, void *skb, int bytes)
+{
+ return (skb_pull((struct sk_buff*)skb, bytes));
+}
+
+void*
-+osl_pktdup(void *drv, void *skb)
++osl_pktdup(osl_t *osh, void *skb)
+{
+ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
+}
+ ((struct sk_buff*)skb)->priority = x;
+}
+
-+#endif /* BINOSL */
-diff -Nur linux-2.4.30/drivers/net/hnd/Makefile linux-2.4.30-brcm/drivers/net/hnd/Makefile
---- linux-2.4.30/drivers/net/hnd/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/Makefile 2005-05-25 18:54:08.000000000 +0200
-@@ -0,0 +1,19 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
-+
-+EXTRA_CFLAGS += -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-+
-+O_TARGET := hnd.o
-+
-+HND_OBJS := bcmutils.o hnddma.o linux_osl.o sbutils.o bcmsrom.o
-+
-+export-objs := shared_ksyms.o
-+obj-y := shared_ksyms.o $(HND_OBJS)
-+obj-m := $(O_TARGET)
-+
-+include $(TOPDIR)/Rules.make
+
-+shared_ksyms.c: shared_ksyms.sh $(HND_OBJS)
-+ sh -e $< $(HND_OBJS) > $@
-diff -Nur linux-2.4.30/drivers/net/hnd/sbutils.c linux-2.4.30-brcm/drivers/net/hnd/sbutils.c
---- linux-2.4.30/drivers/net/hnd/sbutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/sbutils.c 2005-05-22 23:01:41.000000000 +0200
-@@ -0,0 +1,2063 @@
++#endif /* BINOSL */
+diff -urN linux.old/drivers/net/hnd/sbutils.c linux.dev/drivers/net/hnd/sbutils.c
+--- linux.old/drivers/net/hnd/sbutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/sbutils.c 2005-11-08 17:58:18.918914500 +0100
+@@ -0,0 +1,2837 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
-+ * Copyright 2004, Broadcom Corporation
++ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+
+#include <typedefs.h>
+#include <osl.h>
++#include <sbutils.h>
+#include <bcmutils.h>
+#include <bcmdevs.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#include <sbpci.h>
++#include <sbpcie.h>
+#include <pcicfg.h>
+#include <sbpcmcia.h>
+#include <sbextif.h>
-+#include <sbutils.h>
+#include <bcmsrom.h>
+
+/* debug/trace */
+#define SB_ERROR(args)
+
+
-+#define CLOCK_BASE_5350 12500000 /* Specific to 5350*/
-+
+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
+typedef bool (*sb_intrsenabled_t)(void *intr_arg);
+
+/* misc sb info needed by some of the routines */
+typedef struct sb_info {
-+ uint chip; /* chip number */
-+ uint chiprev; /* chip revision */
-+ uint chippkg; /* chip package option */
-+ uint boardtype; /* board type */
-+ uint boardvendor; /* board vendor id */
-+ uint bustype; /* what bus type we are going through */
++
++ struct sb_pub sb; /* back plane public state(must be first field of sb_info */
+
+ void *osh; /* osl os handle */
+ void *sdh; /* bcmsdh handle */
+
+ uint curidx; /* current core index */
+ uint dev_coreid; /* the core provides driver functions */
-+ uint pciidx; /* pci core index */
-+ uint pcirev; /* pci core rev */
+
-+ uint pcmciaidx; /* pcmcia core index */
-+ uint pcmciarev; /* pcmcia core rev */
+ bool memseg; /* flag to toggle MEM_SEG register */
+
-+ uint ccrev; /* chipc core rev */
-+
+ uint gpioidx; /* gpio control core index */
+ uint gpioid; /* gpio control coretype */
+
+ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */
+ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */
+ sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */
++
+} sb_info_t;
+
+/* local prototypes */
-+static void* BCMINIT(sb_doattach)(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
++static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
++ uint bustype, void *sdh, char **vars, int *varsz);
+static void BCMINIT(sb_scan)(sb_info_t *si);
-+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
-+static uint _sb_coreidx(void *sbh);
-+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
++static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val);
++static uint _sb_coreidx(sb_info_t *si);
++static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit);
+static uint BCMINIT(sb_pcidev2chip)(uint pcidev);
+static uint BCMINIT(sb_chip2numcores)(uint chip);
++static bool sb_ispcie(sb_info_t *si);
++static bool sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen);
++static int sb_pci_fixcfg(sb_info_t *si);
++
++/* routines to access mdio slave device registers */
++static int sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint readdr, uint val);
++static void BCMINIT(sb_war30841)(sb_info_t *si);
++
++/* delay needed between the mdio control/ mdiodata register data access */
++#define PR28829_DELAY() OSL_DELAY(10)
++
++
++/* global variable to indicate reservation/release of gpio's*/
++static uint32 sb_gpioreservation = 0;
+
+#define SB_INFO(sbh) (sb_info_t*)sbh
+#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
+#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
+#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
+#define BADIDX (SB_MAXCORES+1)
-+#define NOREV (SBIDH_RC_MASK + 1)
++#define NOREV -1
++
++#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI))
++#define PCIE(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE))
++
++/* sonicsrev */
++#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
++#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
+
+#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr))
+#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v))
+ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
+ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
+
-+/* power control defines */
++/* dynamic clock control defines */
+#define LPOMINFREQ 25000 /* low power oscillator min */
+#define LPOMAXFREQ 43000 /* low power oscillator max */
-+#define XTALMINFREQ 19800000 /* 20mhz - 1% */
-+#define XTALMAXFREQ 20200000 /* 20mhz + 1% */
-+#define PCIMINFREQ 25000000 /* 25mhz */
-+#define PCIMAXFREQ 34000000 /* 33mhz + fudge */
-+#define SCC_DEF_DIV 0 /* default slow clock divider */
++#define XTALMINFREQ 19800000 /* 20 MHz - 1% */
++#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */
++#define PCIMINFREQ 25000000 /* 25 MHz */
++#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */
+
-+#define XTAL_ON_DELAY 1000 /* Xtal power on delay in us */
++#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */
++#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */
+
-+#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */
++#define MIN_DUMPBUFLEN 32 /* debug */
++
++/* different register spaces to access thr'u pcie indirect access*/
++#define PCIE_CONFIGREGS 1
++#define PCIE_PCIEREGS 2
++
++/* GPIO Based LED powersave defines */
++#define DEFAULT_GPIO_ONTIME 10
++#define DEFAULT_GPIO_OFFTIME 90
++
++#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
+
+static uint32
-+sb_read_sbreg(void *sbh, volatile uint32 *sbr)
++sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr)
+{
-+ sb_info_t *si;
+ uint8 tmp;
+ uint32 val, intr_val = 0;
+
-+ si = SB_INFO(sbh);
+
+ /*
+ * compact flash only has 11 bits address, while we needs 12 bits address.
+ INTR_OFF(si, intr_val);
+ tmp = 1;
+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ (uintptr)sbr &= ~(1 << 11); /* mask out bit 11*/
++ sbr = (uint32) ((uintptr) sbr & ~(1 << 11)); /* mask out bit 11*/
+ }
+
+ val = R_REG(sbr);
+}
+
+static void
-+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
++sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v)
+{
-+ sb_info_t *si;
+ uint8 tmp;
+ volatile uint32 dummy;
+ uint32 intr_val = 0;
+
-+ si = SB_INFO(sbh);
+
+ /*
+ * compact flash only has 11 bits address, while we needs 12 bits address.
+ INTR_OFF(si, intr_val);
+ tmp = 1;
+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ (uintptr)sbr &= ~(1 << 11); /* mask out bit 11 */
++ sbr = (uint32) ((uintptr) sbr & ~(1 << 11)); /* mask out bit 11*/
+ }
+
-+ if (BUSTYPE(si->bustype) == PCMCIA_BUS) {
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
+#ifdef IL_BIGENDIAN
+ dummy = R_REG(sbr);
+ W_REG(((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
+ * vars - pointer to a pointer area for "environment" variables
+ * varsz - pointer to int to return the size of the vars
+ */
-+void*
-+BCMINITFN(sb_attach)(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++sb_t *
++BCMINITFN(sb_attach)(uint devid, osl_t *osh, void *regs,
++ uint bustype, void *sdh, char **vars, int *varsz)
+{
+ sb_info_t *si;
+
+ MFREE(osh, si, sizeof (sb_info_t));
+ return (NULL);
+ }
-+ return si;
++ return (sb_t *)si;
+}
+
+/* Using sb_kattach depends on SB_BUS support, either implicit */
+static sb_info_t ksi;
+
+/* generic kernel variant of sb_attach() */
-+void*
++sb_t *
+BCMINITFN(sb_kattach)()
+{
+ uint32 *regs;
-+ char *unused;
-+ int varsz;
+
+ if (ksi.curmap == NULL) {
+ uint32 cid;
+ cid = R_REG((uint32 *)regs);
+ if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) &&
+ ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) &&
-+ ((cid & CID_REV_MASK) <= 0x00020000)) {
++ ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) {
+ uint32 *scc, val;
+
+ scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
+ }
+
+ if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
-+ SB_BUS, NULL, &unused, &varsz) == NULL) {
++ SB_BUS, NULL, NULL, NULL) == NULL) {
+ return NULL;
+ }
+ }
+
-+ return &ksi;
++ return (sb_t *)&ksi;
+}
+#endif
+
-+static void*
-+BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++static sb_info_t *
++BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs,
++ uint bustype, void *sdh, char **vars, int *varsz)
+{
+ uint origidx;
+ chipcregs_t *cc;
++ sbconfig_t *sb;
+ uint32 w;
-+ int res;
+
+ ASSERT(GOODREGS(regs));
+
+ bzero((uchar*)si, sizeof (sb_info_t));
+
-+ si->pciidx = si->gpioidx = BADIDX;
++ si->sb.buscoreidx = si->gpioidx = BADIDX;
+
+ si->osh = osh;
+ si->curmap = regs;
+ bustype = PCI_BUS;
+ }
+
-+ si->bustype = bustype;
-+ if (si->bustype != BUSTYPE(si->bustype)) {
++ si->sb.bustype = bustype;
++ if (si->sb.bustype != BUSTYPE(si->sb.bustype)) {
+ SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n",
-+ si->bustype, BUSTYPE(si->bustype)));
++ si->sb.bustype, BUSTYPE(si->sb.bustype)));
+ return NULL;
+ }
+
+ /* need to set memseg flag for CF card first before any sb registers access */
-+ if (BUSTYPE(si->bustype) == PCMCIA_BUS)
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
+ si->memseg = TRUE;
+
+ /* kludge to enable the clock on the 4306 which lacks a slowclock */
-+ if (BUSTYPE(si->bustype) == PCI_BUS)
-+ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
++ if (BUSTYPE(si->sb.bustype) == PCI_BUS)
++ sb_clkctl_xtal(&si->sb, XTAL|PLL, ON);
++
++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
++ w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32));
++ if (!GOODCOREADDR(w))
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE);
++ }
+
+ /* initialize current core index value */
-+ si->curidx = _sb_coreidx((void*)si);
++ si->curidx = _sb_coreidx(si);
++
+ if (si->curidx == BADIDX) {
++ SB_ERROR(("sb_doattach: bad core index\n"));
+ return NULL;
+ }
+
++ /* get sonics backplane revision */
++ sb = REGS2SB(si->curmap);
++ si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
++
+ /* keep and reuse the initial register mapping */
+ origidx = si->curidx;
-+ if (BUSTYPE(si->bustype) == SB_BUS)
++ if (BUSTYPE(si->sb.bustype) == SB_BUS)
+ si->regs[origidx] = regs;
+
+ /* is core-0 a chipcommon core? */
+ si->numcores = 1;
-+ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
-+ if (sb_coreid((void*)si) != SB_CC)
++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0);
++ if (sb_coreid(&si->sb) != SB_CC)
+ cc = NULL;
+
+ /* determine chip id and rev */
+ if (cc) {
+ /* chip common core found! */
-+ si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
-+ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
-+ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
++ si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK;
++ si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
++ si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
+ } else {
+ /* The only pcmcia chip without a chipcommon core is a 4301 */
-+ if (BUSTYPE(si->bustype) == PCMCIA_BUS)
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
+ devid = BCM4301_DEVICE_ID;
+
+ /* no chip common core -- must convert device id to chip id */
-+ if ((si->chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) {
-+ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
++ if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) {
++ SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid));
++ sb_setcoreidx(&si->sb, origidx);
+ return NULL;
+ }
+ }
+
+ /* get chipcommon rev */
-+ si->ccrev = cc ? sb_corerev((void*)si) : NOREV;
++ si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV;
+
+ /* determine numcores */
-+ if (cc && ((si->ccrev == 4) || (si->ccrev >= 6)))
++ if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6)))
+ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
+ else
-+ si->numcores = BCMINIT(sb_chip2numcores)(si->chip);
++ si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip);
+
+ /* return to original core */
-+ sb_setcoreidx((void*)si, origidx);
++ sb_setcoreidx(&si->sb, origidx);
+
+ /* sanity checks */
-+ ASSERT(si->chip);
++ ASSERT(si->sb.chip);
+
+ /* scan for cores */
+ BCMINIT(sb_scan)(si);
+
++ /* fixup necessary chip/core configurations */
++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
++ if (sb_pci_fixcfg(si)) {
++ SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n"));
++ return NULL;
++ }
++ }
++
+ /* srom_var_init() depends on sb_scan() info */
-+ if ((res = srom_var_init(si, si->bustype, si->curmap, osh, vars, varsz))) {
-+ SB_ERROR(("sb_attach: srom_var_init failed: bad srom\n"));
++ if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) {
++ SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n"));
+ return (NULL);
+ }
+
+ * For example, the "A0" silicon of each chip is chip rev 0.
+ * For PCMCIA we get it from the CIS instead.
+ */
-+ if (BUSTYPE(si->bustype) == PCMCIA_BUS) {
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
+ ASSERT(vars);
-+ si->chiprev = getintvar(*vars, "chiprev");
-+ } else if (BUSTYPE(si->bustype) == PCI_BUS) {
++ si->sb.chiprev = getintvar(*vars, "chiprev");
++ } else if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
-+ si->chiprev = w & 0xff;
++ si->sb.chiprev = w & 0xff;
+ } else
-+ si->chiprev = 0;
++ si->sb.chiprev = 0;
+ }
+
-+ if (BUSTYPE(si->bustype) == PCMCIA_BUS) {
++ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
+ w = getintvar(*vars, "regwindowsz");
+ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
+ }
+
+ /* gpio control core is required */
+ if (!GOODIDX(si->gpioidx)) {
-+ SB_ERROR(("sb_attach: gpio control core not found\n"));
++ SB_ERROR(("sb_doattach: gpio control core not found\n"));
+ return NULL;
+ }
+
+ /* get boardtype and boardrev */
-+ switch (BUSTYPE(si->bustype)) {
++ switch (BUSTYPE(si->sb.bustype)) {
+ case PCI_BUS:
+ /* do a pci config read to get subsystem id and subvendor id */
+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
-+ si->boardvendor = w & 0xffff;
-+ si->boardtype = (w >> 16) & 0xffff;
++ si->sb.boardvendor = w & 0xffff;
++ si->sb.boardtype = (w >> 16) & 0xffff;
+ break;
+
+ case PCMCIA_BUS:
+ case SDIO_BUS:
-+ si->boardvendor = getintvar(*vars, "manfid");
-+ si->boardtype = getintvar(*vars, "prodid");
++ si->sb.boardvendor = getintvar(*vars, "manfid");
++ si->sb.boardtype = getintvar(*vars, "prodid");
+ break;
+
+ case SB_BUS:
-+ si->boardvendor = VENDOR_BROADCOM;
-+ si->boardtype = 0xffff;
++ case JTAG_BUS:
++ si->sb.boardvendor = VENDOR_BROADCOM;
++ if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0)
++ si->sb.boardtype = 0xffff;
+ break;
+ }
+
-+ if (si->boardtype == 0) {
-+ SB_ERROR(("sb_attach: unknown board type\n"));
-+ ASSERT(si->boardtype);
++ if (si->sb.boardtype == 0) {
++ SB_ERROR(("sb_doattach: unknown board type\n"));
++ ASSERT(si->sb.boardtype);
++ }
++
++ /* setup the GPIO based LED powersave register */
++ if (si->sb.ccrev >= 16) {
++ w = getintvar(*vars, "gpiotimerval");
++ if (!w)
++ w = DEFAULT_GPIOTIMERVAL;
++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w);
+ }
+
+
-+ return ((void*)si);
++ return (si);
+}
+
+uint
-+sb_coreid(void *sbh)
++sb_coreid(sb_t *sbh)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+ si = SB_INFO(sbh);
+ sb = REGS2SB(si->curmap);
+
-+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
+}
+
+uint
-+sb_coreidx(void *sbh)
++sb_coreidx(sb_t *sbh)
+{
+ sb_info_t *si;
+
+
+/* return current index of core */
+static uint
-+_sb_coreidx(void *sbh)
++_sb_coreidx(sb_info_t *si)
+{
-+ sb_info_t *si;
+ sbconfig_t *sb;
+ uint32 sbaddr = 0;
+
-+ si = SB_INFO(sbh);
+ ASSERT(si);
+
-+ switch (BUSTYPE(si->bustype)) {
++ switch (BUSTYPE(si->sb.bustype)) {
+ case SB_BUS:
+ sb = REGS2SB(si->curmap);
-+ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
++ sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0));
+ break;
+
+ case PCI_BUS:
+ sbaddr |= (uint)tmp << 24;
+ break;
+ }
++
++#ifdef BCMJTAG
++ case JTAG_BUS:
++ sbaddr = (uint32)si->curmap;
++ break;
++#endif /* BCMJTAG */
++
+ default:
+ ASSERT(0);
+ }
+}
+
+uint
-+sb_corevendor(void *sbh)
++sb_corevendor(sb_t *sbh)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+ si = SB_INFO(sbh);
+ sb = REGS2SB(si->curmap);
+
-+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
+}
+
+uint
-+sb_corerev(void *sbh)
++sb_corerev(sb_t *sbh)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
++ uint sbidh;
+
+ si = SB_INFO(sbh);
+ sb = REGS2SB(si->curmap);
++ sbidh = R_SBREG(si, &(sb)->sbidhigh);
+
-+ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
++ return (SBCOREREV(sbidh));
+}
+
+void *
-+sb_osh(void *sbh)
++sb_osh(sb_t *sbh)
+{
+ sb_info_t *si;
+
+
+/* set/clear sbtmstatelow core-specific flags */
+uint32
-+sb_coreflags(void *sbh, uint32 mask, uint32 val)
++sb_coreflags(sb_t *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+
+ /* mask and set */
+ if (mask || val) {
-+ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
-+ W_SBREG(sbh, &sb->sbtmstatelow, w);
++ w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
++ W_SBREG(si, &sb->sbtmstatelow, w);
+ }
+
+ /* return the new value */
-+ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
++ return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW);
+}
+
+/* set/clear sbtmstatehigh core-specific flags */
+uint32
-+sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
++sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 w;
++
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ ASSERT((val & ~mask) == 0);
++ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
++
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val;
++ W_SBREG(si, &sb->sbtmstatehigh, w);
++ }
++
++ /* return the new value */
++ return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
++}
++
++/* caller needs to take care of core-specific bist hazards */
++int
++sb_corebist(sb_t *sbh, uint coreid, uint coreunit)
+{
++ uint32 sblo;
++ uint coreidx;
+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 w;
++ int result = 0;
+
+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
+
-+ ASSERT((val & ~mask) == 0);
-+ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
++ coreidx = sb_findcoreidx(si, coreid, coreunit);
++ if (!GOODIDX(coreidx))
++ result = BCME_ERROR;
++ else {
++ sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0);
++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE));
++
++ SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000);
++
++ if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF)
++ result = BCME_ERROR;
+
-+ /* mask and set */
-+ if (mask || val) {
-+ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
-+ W_SBREG(sbh, &sb->sbtmstatehigh, w);
++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo);
+ }
+
-+ /* return the new value */
-+ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
++ return result;
+}
+
+bool
-+sb_iscoreup(void *sbh)
++sb_iscoreup(sb_t *sbh)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+ si = SB_INFO(sbh);
+ sb = REGS2SB(si->curmap);
+
-+ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
++ return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK);
+}
+
+/*
+ * switch back to the original core, and return the new value.
+ */
+static uint
-+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
++sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val)
+{
-+ sb_info_t *si;
+ uint origidx;
+ uint32 *r;
+ uint w;
+ ASSERT(regoff < SB_CORE_SIZE);
+ ASSERT((val & ~mask) == 0);
+
-+ si = SB_INFO(sbh);
-+
+ INTR_OFF(si, intr_val);
+
+ /* save current core index */
-+ origidx = sb_coreidx(sbh);
++ origidx = sb_coreidx(&si->sb);
+
+ /* switch core */
-+ r = (uint32*) ((uchar*) sb_setcoreidx(sbh, coreidx) + regoff);
++ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff);
+
+ /* mask and set */
+ if (mask || val) {
+ if (regoff >= SBCONFIGOFF) {
-+ w = (R_SBREG(sbh, r) & ~mask) | val;
-+ W_SBREG(sbh, r, w);
++ w = (R_SBREG(si, r) & ~mask) | val;
++ W_SBREG(si, r, w);
+ } else {
+ w = (R_REG(r) & ~mask) | val;
+ W_REG(r, w);
+
+ /* readback */
+ if (regoff >= SBCONFIGOFF)
-+ w = R_SBREG(sbh, r);
++ w = R_SBREG(si, r);
+ else
+ w = R_REG(r);
+
+ /* restore core index */
+ if (origidx != coreidx)
-+ sb_setcoreidx(sbh, origidx);
++ sb_setcoreidx(&si->sb, origidx);
+
+ INTR_RESTORE(si, intr_val);
+ return (w);
+}
+
++#define DWORD_ALIGN(x) (x & ~(0x03))
++#define BYTE_POS(x) (x & 0x3)
++#define WORD_POS(x) (x & 0x1)
++
++#define BYTE_SHIFT(x) (8 * BYTE_POS(x))
++#define WORD_SHIFT(x) (16 * WORD_POS(x))
++
++#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF)
++#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF)
++
++#define read_pci_cfg_byte(a) \
++ (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff)
++
++#define read_pci_cfg_write(a) \
++ (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff)
++
++
++/* return TRUE if requested capability exists in the PCI config space */
++static bool
++sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen)
++{
++ uint8 cap_id;
++ uint8 cap_ptr;
++ uint32 bufsize;
++ uint8 byte_val;
++
++ if (BUSTYPE(si->sb.bustype) != PCI_BUS)
++ return FALSE;
++
++ /* check for Header type 0*/
++ byte_val = read_pci_cfg_byte(PCI_CFG_HDR);
++ if ((byte_val & 0x7f) != PCI_HEADER_NORMAL)
++ return FALSE;
++
++ /* check if the capability pointer field exists */
++ byte_val = read_pci_cfg_byte(PCI_CFG_STAT);
++ if (!(byte_val & PCI_CAPPTR_PRESENT))
++ return FALSE;
++
++ cap_ptr = read_pci_cfg_byte(PCI_CFG_CAPPTR);
++ /* check if the capability pointer is 0x00 */
++ if (cap_ptr == 0x00)
++ return FALSE;
++
++
++ /* loop thr'u the capability list and see if the pcie capabilty exists */
++
++ cap_id = read_pci_cfg_byte(cap_ptr);
++
++ while (cap_id != req_cap_id) {
++ cap_ptr = read_pci_cfg_byte((cap_ptr+1));
++ if (cap_ptr == 0x00) break;
++ cap_id = read_pci_cfg_byte(cap_ptr);
++ }
++ if (cap_id != req_cap_id) {
++ return FALSE;
++ }
++ /* found the caller requested capability */
++ if ((buf != NULL) && (buflen != NULL)) {
++ bufsize = *buflen;
++ if (!bufsize) goto end;
++ *buflen = 0;
++ /* copy the cpability data excluding cap ID and next ptr */
++ cap_ptr += 2;
++ if ((bufsize + cap_ptr) > SZPCR)
++ bufsize = SZPCR - cap_ptr;
++ *buflen = bufsize;
++ while (bufsize--) {
++ *buf = read_pci_cfg_byte(cap_ptr);
++ cap_ptr++;
++ buf++;
++ }
++ }
++end:
++ return TRUE;
++}
++
++/* return TRUE if PCIE capability exists the pci config space */
++static bool
++sb_ispcie(sb_info_t *si)
++{
++ return(sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL));
++}
++
+/* scan the sb enumerated space to identify all cores */
+static void
+BCMINITFN(sb_scan)(sb_info_t *si)
+{
-+ void *sbh;
+ uint origidx;
+ uint i;
++ bool pci;
++ bool pcie;
++ uint pciidx;
++ uint pcieidx;
++ uint pcirev;
++ uint pcierev;
++
+
-+ sbh = (void*) si;
+
+ /* numcores should already be set */
+ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
+
+ /* save current core index */
-+ origidx = sb_coreidx(sbh);
++ origidx = sb_coreidx(&si->sb);
+
-+ si->pciidx = si->pcmciaidx = si->gpioidx = BADIDX;
-+ si->pcirev = si->pcmciarev = NOREV;
++ si->sb.buscorerev = NOREV;
++ si->sb.buscoreidx = BADIDX;
+
-+ for (i = 0; i < si->numcores; i++) {
-+ sb_setcoreidx(sbh, i);
-+ si->coreid[i] = sb_coreid(sbh);
++ si->gpioidx = BADIDX;
+
-+ if (si->coreid[i] == SB_PCI) {
-+ si->pciidx = i;
-+ si->pcirev = sb_corerev(sbh);
++ pci = pcie = FALSE;
++ pcirev = pcierev = NOREV;
++ pciidx = pcieidx = BADIDX;
+
++ for (i = 0; i < si->numcores; i++) {
++ sb_setcoreidx(&si->sb, i);
++ si->coreid[i] = sb_coreid(&si->sb);
++
++ if (si->coreid[i] == SB_PCI) {
++ pciidx = i;
++ pcirev = sb_corerev(&si->sb);
++ pci = TRUE;
++ } else if (si->coreid[i] == SB_PCIE) {
++ pcieidx = i;
++ pcierev = sb_corerev(&si->sb);
++ pcie = TRUE;
+ } else if (si->coreid[i] == SB_PCMCIA) {
-+ si->pcmciaidx = i;
-+ si->pcmciarev = sb_corerev(sbh);
++ si->sb.buscorerev = sb_corerev(&si->sb);
++ si->sb.buscoretype = si->coreid[i];
++ si->sb.buscoreidx = i;
+ }
+ }
++ if (pci && pcie) {
++ if (sb_ispcie(si))
++ pci = FALSE;
++ else
++ pcie = FALSE;
++ }
++ if (pci) {
++ si->sb.buscoretype = SB_PCI;
++ si->sb.buscorerev = pcirev;
++ si->sb.buscoreidx = pciidx;
++ }
++ else if (pcie) {
++ si->sb.buscoretype = SB_PCIE;
++ si->sb.buscorerev = pcierev;
++ si->sb.buscoreidx = pcieidx;
++ }
+
+ /*
+ * Find the gpio "controlling core" type and index.
+ * - else if there's a pci core (rev >= 2) - use that
+ * - else there had better be an extif core (4710 only)
+ */
-+ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
-+ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
++ if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) {
++ si->gpioidx = sb_findcoreidx(si, SB_CC, 0);
+ si->gpioid = SB_CC;
-+ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
-+ si->gpioidx = si->pciidx;
++ } else if (PCI(si) && (si->sb.buscorerev >= 2)) {
++ si->gpioidx = si->sb.buscoreidx;
+ si->gpioid = SB_PCI;
-+ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
-+ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
++ } else if (sb_findcoreidx(si, SB_EXTIF, 0)) {
++ si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0);
+ si->gpioid = SB_EXTIF;
+ } else
+ ASSERT(si->gpioidx != BADIDX);
+
+ /* return to original core index */
-+ sb_setcoreidx(sbh, origidx);
++ sb_setcoreidx(&si->sb, origidx);
+}
+
+/* may be called with core in reset */
+void
-+sb_detach(void *sbh)
++sb_detach(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint idx;
+ if (si == NULL)
+ return;
+
-+ if (BUSTYPE(si->bustype) == SB_BUS)
++ if (BUSTYPE(si->sb.bustype) == SB_BUS)
+ for (idx = 0; idx < SB_MAXCORES; idx++)
+ if (si->regs[idx]) {
+ REG_UNMAP(si->regs[idx]);
+ si->regs[idx] = NULL;
+ }
+
-+ MFREE(si->osh, si, sizeof (sb_info_t));
++ if (si != &ksi)
++ MFREE(si->osh, si, sizeof (sb_info_t));
+}
+
+/* use pci dev id to determine chip id for chips not having a chipcommon core */
+{
+ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
+ return (BCM4710_DEVICE_ID);
-+ if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
-+ return (BCM4610_DEVICE_ID);
+ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
+ return (BCM4402_DEVICE_ID);
+ if (pcidev == BCM4401_ENET_ID)
+static uint
+BCMINITFN(sb_chip2numcores)(uint chip)
+{
-+ if (chip == 0x4710)
++ if (chip == BCM4710_DEVICE_ID)
+ return (9);
-+ if (chip == 0x4610)
-+ return (9);
-+ if (chip == 0x4402)
++ if (chip == BCM4402_DEVICE_ID)
+ return (3);
-+ if ((chip == 0x4307) || (chip == 0x4301))
++ if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID))
+ return (5);
-+ if (chip == 0x4310)
-+ return (8);
-+ if (chip == 0x4306) /* < 4306c0 */
++ if (chip == BCM4306_DEVICE_ID) /* < 4306c0 */
+ return (6);
-+ if (chip == 0x4704)
++ if (chip == BCM4704_DEVICE_ID)
+ return (9);
-+ if (chip == 0x5365)
++ if (chip == BCM5365_DEVICE_ID)
+ return (7);
+
+ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
+
+/* return index of coreid or BADIDX if not found */
+static uint
-+sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
++sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit)
+{
-+ sb_info_t *si;
+ uint found;
+ uint i;
+
-+ si = SB_INFO(sbh);
+ found = 0;
+
+ for (i = 0; i < si->numcores; i++)
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void*
-+sb_setcoreidx(void *sbh, uint coreidx)
++sb_setcoreidx(sb_t *sbh, uint coreidx)
+{
+ sb_info_t *si;
+ uint32 sbaddr;
+
+ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
+
-+ switch (BUSTYPE(si->bustype)) {
++ switch (BUSTYPE(si->sb.bustype)) {
+ case SB_BUS:
+ /* map new one */
+ if (!si->regs[coreidx]) {
+ tmp = (sbaddr >> 24) & 0xff;
+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
+ break;
++#ifdef BCMJTAG
++ case JTAG_BUS:
++ /* map new one */
++ if (!si->regs[coreidx]) {
++ si->regs[coreidx] = (void *)sbaddr;
++ ASSERT(GOODREGS(si->regs[coreidx]));
++ }
++ si->curmap = si->regs[coreidx];
++ break;
++#endif /* BCMJTAG */
+ }
+
+ si->curidx = coreidx;
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void*
-+sb_setcore(void *sbh, uint coreid, uint coreunit)
++sb_setcore(sb_t *sbh, uint coreid, uint coreunit)
+{
+ sb_info_t *si;
+ uint idx;
+
+ si = SB_INFO(sbh);
-+
-+ idx = sb_findcoreidx(sbh, coreid, coreunit);
++ idx = sb_findcoreidx(si, coreid, coreunit);
+ if (!GOODIDX(idx))
+ return (NULL);
+
+
+/* return chip number */
+uint
-+BCMINITFN(sb_chip)(void *sbh)
++BCMINITFN(sb_chip)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->chip);
++ return (si->sb.chip);
+}
+
+/* return chip revision number */
+uint
-+BCMINITFN(sb_chiprev)(void *sbh)
++BCMINITFN(sb_chiprev)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->chiprev);
++ return (si->sb.chiprev);
+}
+
+/* return chip common revision number */
+uint
-+BCMINITFN(sb_chipcrev)(void *sbh)
++BCMINITFN(sb_chipcrev)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->ccrev);
++ return (si->sb.ccrev);
+}
+
+/* return chip package option */
+uint
-+BCMINITFN(sb_chippkg)(void *sbh)
++BCMINITFN(sb_chippkg)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->chippkg);
++ return (si->sb.chippkg);
+}
+
+/* return PCI core rev. */
+uint
-+BCMINITFN(sb_pcirev)(void *sbh)
++BCMINITFN(sb_pcirev)(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++ return (si->sb.buscorerev);
++}
++
++bool
++BCMINITFN(sb_war16165)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->pcirev);
++
++ return (PCI(si) && (si->sb.buscorerev <= 10));
++}
++
++static void
++BCMINITFN(sb_war30841)(sb_info_t *si)
++{
++ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
++ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
++ sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
+}
+
+/* return PCMCIA core rev. */
+uint
-+BCMINITFN(sb_pcmciarev)(void *sbh)
++BCMINITFN(sb_pcmciarev)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->pcmciarev);
++ return (si->sb.buscorerev);
+}
+
+/* return board vendor id */
+uint
-+BCMINITFN(sb_boardvendor)(void *sbh)
++BCMINITFN(sb_boardvendor)(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->boardvendor);
++ return (si->sb.boardvendor);
+}
+
+/* return boardtype */
+uint
-+BCMINITFN(sb_boardtype)(void *sbh)
++BCMINITFN(sb_boardtype)(sb_t *sbh)
+{
+ sb_info_t *si;
+ char *var;
+
+ si = SB_INFO(sbh);
+
-+ if (BUSTYPE(si->bustype) == SB_BUS && si->boardtype == 0xffff) {
++ if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) {
+ /* boardtype format is a hex string */
-+ si->boardtype = getintvar(NULL, "boardtype");
++ si->sb.boardtype = getintvar(NULL, "boardtype");
+
+ /* backward compatibility for older boardtype string format */
-+ if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
++ if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
+ if (!strcmp(var, "bcm94710dev"))
-+ si->boardtype = BCM94710D_BOARD;
++ si->sb.boardtype = BCM94710D_BOARD;
+ else if (!strcmp(var, "bcm94710ap"))
-+ si->boardtype = BCM94710AP_BOARD;
-+ else if (!strcmp(var, "bcm94310u"))
-+ si->boardtype = BCM94310U_BOARD;
-+ else if (!strcmp(var, "bu4711"))
-+ si->boardtype = BU4711_BOARD;
++ si->sb.boardtype = BCM94710AP_BOARD;
+ else if (!strcmp(var, "bu4710"))
-+ si->boardtype = BU4710_BOARD;
++ si->sb.boardtype = BU4710_BOARD;
+ else if (!strcmp(var, "bcm94702mn"))
-+ si->boardtype = BCM94702MN_BOARD;
++ si->sb.boardtype = BCM94702MN_BOARD;
+ else if (!strcmp(var, "bcm94710r1"))
-+ si->boardtype = BCM94710R1_BOARD;
++ si->sb.boardtype = BCM94710R1_BOARD;
+ else if (!strcmp(var, "bcm94710r4"))
-+ si->boardtype = BCM94710R4_BOARD;
++ si->sb.boardtype = BCM94710R4_BOARD;
+ else if (!strcmp(var, "bcm94702cpci"))
-+ si->boardtype = BCM94702CPCI_BOARD;
++ si->sb.boardtype = BCM94702CPCI_BOARD;
+ else if (!strcmp(var, "bcm95380_rr"))
-+ si->boardtype = BCM95380RR_BOARD;
++ si->sb.boardtype = BCM95380RR_BOARD;
+ }
+ }
+
-+ return (si->boardtype);
++ return (si->sb.boardtype);
+}
+
-+/* return bus type of sdh device */
++/* return bus type of sbh device */
+uint
-+sb_bus(void *sbh)
++sb_bus(sb_t *sbh)
+{
+ sb_info_t *si;
+
+ si = SB_INFO(sbh);
-+ return (si->bustype);
++ return (si->sb.bustype);
++}
++
++/* return bus core type */
++uint
++sb_buscoretype(sb_t *sbh)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ return (si->sb.buscoretype);
++}
++
++/* return bus core revision */
++uint
++sb_buscorerev(sb_t *sbh)
++{
++ sb_info_t *si;
++ si = SB_INFO(sbh);
++
++ return (si->sb.buscorerev);
+}
+
+/* return list of found cores */
+uint
-+sb_corelist(void *sbh, uint coreid[])
++sb_corelist(sb_t *sbh, uint coreid[])
+{
+ sb_info_t *si;
+
+
+/* return current register mapping */
+void *
-+sb_coreregs(void *sbh)
++sb_coreregs(sb_t *sbh)
+{
+ sb_info_t *si;
+
+
+/* do buffered registers update */
+void
-+sb_commit(void *sbh)
++sb_commit(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint origidx;
+ INTR_OFF(si, intr_val);
+
+ /* switch over to chipcommon core if there is one, else use pci */
-+ if (si->ccrev != NOREV) {
++ if (si->sb.ccrev != NOREV) {
+ chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0);
+
+ /* do the buffer registers update */
+ W_REG(&ccregs->broadcastaddress, SB_COMMIT);
+ W_REG(&ccregs->broadcastdata, 0x0);
-+ } else if (si->pciidx != BADIDX) {
++ } else if (PCI(si)) {
+ sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0);
+
+ /* do the buffer registers update */
+ W_REG(&pciregs->bcastaddr, SB_COMMIT);
+ W_REG(&pciregs->bcastdata, 0x0);
-+ } else {
-+ ASSERT((si->ccrev != NOREV) && (si->pciidx != BADIDX));
-+ }
++ } else
++ ASSERT(0);
+
+ /* restore core index */
+ sb_setcoreidx(sbh, origidx);
+
+/* reset and re-enable a core */
+void
-+sb_core_reset(void *sbh, uint32 bits)
++sb_core_reset(sb_t *sbh, uint32 bits)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+ */
+
+ /* set reset while enabling the clock and forcing them on throughout the core */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+
-+ if (sb_coreid(sbh) == SB_ILINE100) {
-+ bcm_mdelay(50);
-+ } else {
-+ OSL_DELAY(1);
-+ }
++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
++ OSL_DELAY(1);
+
-+ if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
-+ W_SBREG(sbh, &sb->sbtmstatehigh, 0);
++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) {
++ W_SBREG(si, &sb->sbtmstatehigh, 0);
+ }
-+ if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
-+ AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
++ if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
++ AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+ }
+
+ /* clear reset and allow it to propagate throughout the core */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
+ OSL_DELAY(1);
+
+ /* leave clock enabled */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
+ OSL_DELAY(1);
+}
+
+void
-+sb_core_tofixup(void *sbh)
++sb_core_tofixup(sb_t *sbh)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+
+ si = SB_INFO(sbh);
+
-+ if ((si->pciidx == BADIDX) || (si->pcirev >= 5))
++ if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) || (PCI(si) && (si->sb.buscorerev >= 5)) )
+ return;
+
+ ASSERT(GOODREGS(si->curmap));
+ sb = REGS2SB(si->curmap);
+
-+ if (BUSTYPE(si->bustype) == SB_BUS) {
-+ SET_SBREG(sbh, &sb->sbimconfiglow,
++ if (BUSTYPE(si->sb.bustype) == SB_BUS) {
++ SET_SBREG(si, &sb->sbimconfiglow,
+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+ (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
+ } else {
+ if (sb_coreid(sbh) == SB_PCI) {
-+ SET_SBREG(sbh, &sb->sbimconfiglow,
++ SET_SBREG(si, &sb->sbimconfiglow,
+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
+ } else {
-+ SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
++ SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
+ }
+ }
+
+ sb_commit(sbh);
+}
+
++/*
++ * Set the initiator timeout for the "master core".
++ * The master core is defined to be the core in control
++ * of the chip and so it issues accesses to non-memory
++ * locations (Because of dma *any* core can access memeory).
++ *
++ * The routine uses the bus to decide who is the master:
++ * SB_BUS => mips
++ * JTAG_BUS => chipc
++ * PCI_BUS => pci or pcie
++ * PCMCIA_BUS => pcmcia
++ * SDIO_BUS => pcmcia
++ *
++ * This routine exists so callers can disable initiator
++ * timeouts so accesses to very slow devices like otp
++ * won't cause an abort. The routine allows arbitrary
++ * settings of the service and request timeouts, though.
++ *
++ * Returns the timeout state before changing it or -1
++ * on error.
++ */
++
++#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
++
++uint32
++sb_set_initiator_to(sb_t *sbh, uint32 to)
++{
++ sb_info_t *si;
++ uint origidx, idx;
++ uint intr_val = 0;
++ uint32 tmp, ret = 0xffffffff;
++ sbconfig_t *sb;
++
++ si = SB_INFO(sbh);
++
++ if ((to & ~TO_MASK) != 0)
++ return ret;
++
++ /* Figure out the master core */
++ idx = BADIDX;
++ switch (BUSTYPE(si->sb.bustype)) {
++ case PCI_BUS:
++ idx = si->sb.buscoreidx;
++ break;
++ case JTAG_BUS:
++ idx = SB_CC_IDX;
++ break;
++ case PCMCIA_BUS:
++ case SDIO_BUS:
++ idx = sb_findcoreidx(si, SB_PCMCIA, 0);
++ break;
++ case SB_BUS:
++ if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX)
++ idx = sb_findcoreidx(si, SB_MIPS, 0);
++ break;
++ default:
++ ASSERT(0);
++ }
++ if (idx == BADIDX)
++ return ret;
++
++ INTR_OFF(si, intr_val);
++ origidx = sb_coreidx(sbh);
++
++ sb = REGS2SB(sb_setcoreidx(sbh, idx));
++
++ tmp = R_SBREG(si, &sb->sbimconfiglow);
++ ret = tmp & TO_MASK;
++ W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
++
++ sb_commit(sbh);
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++ return ret;
++}
++
+void
-+sb_core_disable(void *sbh, uint32 bits)
++sb_core_disable(sb_t *sbh, uint32 bits)
+{
+ sb_info_t *si;
+ volatile uint32 dummy;
++ uint32 rej;
+ sbconfig_t *sb;
+
+ si = SB_INFO(sbh);
+ sb = REGS2SB(si->curmap);
+
+ /* if core is already in reset, just return */
-+ if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
++ if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET)
+ return;
+
++ /* reject value changed between sonics 2.2 and 2.3 */
++ if (si->sb.sonicsrev == SONICS_2_2)
++ rej = (1 << SBTML_REJ_SHIFT);
++ else
++ rej = (2 << SBTML_REJ_SHIFT);
++
+ /* if clocks are not enabled, put into reset and return */
-+ if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
++ if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0)
+ goto disable;
+
-+ /* set the target reject bit and spin until busy is clear */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ /* set target reject and spin until busy is clear (preserve core-specific bits) */
++ OR_SBREG(si, &sb->sbtmstatelow, rej);
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
+ OSL_DELAY(1);
-+ SPINWAIT((R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
++ SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
+
-+ if (R_SBREG(sbh, &sb->sbidlow) & SBIDL_INIT) {
-+ OR_SBREG(sbh, &sb->sbimstate, SBIM_RJ);
-+ dummy = R_SBREG(sbh, &sb->sbimstate);
++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) {
++ OR_SBREG(si, &sb->sbimstate, SBIM_RJ);
++ dummy = R_SBREG(si, &sb->sbimstate);
+ OSL_DELAY(1);
-+ SPINWAIT((R_SBREG(sbh, &sb->sbimstate) & SBIM_BY), 100000);
++ SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000);
+ }
+
+ /* set reset and reject while enabling the clocks */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET));
++ dummy = R_SBREG(si, &sb->sbtmstatelow);
+ OSL_DELAY(10);
+
+ /* don't forget to clear the initiator reject bit */
-+ if (R_SBREG(sbh, &sb->sbidlow) & SBIDL_INIT)
-+ AND_SBREG(sbh, &sb->sbimstate, ~SBIM_RJ);
++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT)
++ AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ);
+
+disable:
+ /* leave reset and reject asserted */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
++ W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET));
+ OSL_DELAY(1);
+}
+
++/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void
-+sb_watchdog(void *sbh, uint ticks)
++sb_watchdog(sb_t *sbh, uint ticks)
+{
+ sb_info_t *si = SB_INFO(sbh);
+
+ /* instant NMI */
+ switch (si->gpioid) {
+ case SB_CC:
-+ sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
+ break;
+ case SB_EXTIF:
-+ sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
++ sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
+ break;
+ }
+}
+
+/* initialize the pcmcia core */
+void
-+sb_pcmcia_init(void *sbh)
++sb_pcmcia_init(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint8 cor;
+ si = SB_INFO(sbh);
+
+ /* enable d11 mac interrupts */
-+ if (si->chip == BCM4301_DEVICE_ID) {
++ if (si->sb.chip == BCM4301_DEVICE_ID) {
+ /* Have to use FCR2 in 4301 */
+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
+ cor |= COR_IRQEN | COR_FUNEN;
+
+/*
+ * Configure the pci core for pci client (NIC) action
-+ * and get appropriate dma offset value.
+ * coremask is the bitvec of cores by index to be enabled.
+ */
+void
-+sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
++sb_pci_setup(sb_t *sbh, uint coremask)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
+ uint32 sbflag;
+ uint32 w;
+ uint idx;
++ int reg_val;
+
+ si = SB_INFO(sbh);
+
-+ if (dmaoffset)
-+ *dmaoffset = 0;
-+
+ /* if not pci bus, we're done */
-+ if (BUSTYPE(si->bustype) != PCI_BUS)
++ if (BUSTYPE(si->sb.bustype) != PCI_BUS)
+ return;
+
-+ ASSERT(si->pciidx != BADIDX);
++ ASSERT(PCI(si) || PCIE(si));
++ ASSERT(si->sb.buscoreidx != BADIDX);
+
+ /* get current core index */
+ idx = si->curidx;
+ /* we interrupt on this backplane flag number */
+ ASSERT(GOODREGS(si->curmap));
+ sb = REGS2SB(si->curmap);
-+ sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
++ sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
+
+ /* switch over to pci core */
-+ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx);
+ sb = REGS2SB(pciregs);
+
+ /*
+ * Enable sb->pci interrupts. Assume
+ * PCI rev 2.3 support was added in pci core rev 6 and things changed..
+ */
-+ if (si->pcirev < 6) {
-+ /* set sbintvec bit for our flag number */
-+ OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
-+ } else {
++ if (PCIE(si) || (PCI(si) && ((si->sb.buscorerev) >= 6))) {
+ /* pci config write to set this core bit in PCIIntMask */
+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
+ w |= (coremask << PCI_SBIM_SHIFT);
+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
++ } else {
++ /* set sbintvec bit for our flag number */
++ OR_SBREG(si, &sb->sbintvec, (1 << sbflag));
++ }
++
++ if (PCI(si)) {
++ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
++ if (si->sb.buscorerev >= 11)
++ OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI);
++ if (si->sb.buscorerev < 5) {
++ SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++ sb_commit(sbh);
++ }
+ }
+
-+ /* enable prefetch and bursts for dma big window */
-+ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
++ if (PCIE(si) && (si->sb.buscorerev == 0)) {
++ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG);
++ reg_val |= 0x8;
++ sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG, reg_val);
+
-+ /* enable read multiple for dma big window */
-+ if (si->pcirev >= 11)
-+ OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI);
++ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG);
++ reg_val &= ~(0x40);
++ sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val);
+
-+ if (si->pcirev < 5) {
-+ SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+ sb_commit(sbh);
++ BCMINIT(sb_war30841)(si);
+ }
+
+ /* switch back to previous core */
+ sb_setcoreidx(sbh, idx);
-+
-+ /* use large sb pci dma window */
-+ if (dmaoffset)
-+ *dmaoffset = SB_PCI_DMA;
+}
+
+uint32
+
+/* return the core-type instantiation # of the current core */
+uint
-+sb_coreunit(void *sbh)
++sb_coreunit(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint idx;
+ return CC_T6_M1;
+ else
+ return CC_T6_M0;
-+ } else if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)|| (pll_type == PLL_TYPE3)) {
++ } else if ((pll_type == PLL_TYPE1) ||
++ (pll_type == PLL_TYPE3) ||
++ (pll_type == PLL_TYPE4) ||
++ (pll_type == PLL_TYPE7)) {
+ n1 = factor6(n1);
+ n2 += CC_F5_BIAS;
+ } else if (pll_type == PLL_TYPE2) {
+ } else if (pll_type == PLL_TYPE5) {
+ return (100000000);
+ } else
-+ ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
-+
-+ /* Special case for 5350 */
-+ if (pll_type == PLL_TYPE3)
-+ clock = CLOCK_BASE_5350 * n1 * n2;
++ ASSERT(0);
++ /* PLL types 3 and 7 use BASE2 (25Mhz) */
++ if ((pll_type == PLL_TYPE3) ||
++ (pll_type == PLL_TYPE7)) {
++ clock = CC_CLOCK_BASE2 * n1 * n2;
++ }
+ else
-+ clock = CC_CLOCK_BASE * n1 * n2;
++ clock = CC_CLOCK_BASE1 * n1 * n2;
+
+ if (clock == 0)
+ return 0;
+ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
+ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
+
-+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4) || (pll_type == PLL_TYPE3)) {
++ if ((pll_type == PLL_TYPE1) ||
++ (pll_type == PLL_TYPE3) ||
++ (pll_type == PLL_TYPE4) ||
++ (pll_type == PLL_TYPE7)) {
+ m1 = factor6(m1);
+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
+ m2 += CC_F5_BIAS;
+
+/* returns the current speed the SB is running at */
+uint32
-+sb_clock(void *sbh)
++sb_clock(sb_t *sbh)
+{
+ sb_info_t *si;
+ extifregs_t *eir;
+ // Added by Chen-I for 5365
+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
+ m = R_REG(&cc->clockcontrol_sb);
-+ else m = R_REG(&cc->clockcontrol_m2);
++ else
++ m = R_REG(&cc->clockcontrol_m2);
+ }
+ else
+ m = R_REG(&cc->clockcontrol_sb);
+ // Added by Chen-I for 5365
+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID)
+ {
-+ rate = 100000000;
++ rate = 100000000;
+ }
+ else
-+ {
++ {
+ /* calculate rate */
+ rate = sb_clock_rate(pll_type, n, m);
-+ if (pll_type == PLL_TYPE3) rate = rate / 2;
++ if (pll_type == PLL_TYPE3)
++ rate = rate / 2;
+ }
+
+ /* switch back to previous core */
+
+/* change logical "focus" to the gpio core for optimized access */
+void*
-+sb_gpiosetcore(void *sbh)
++sb_gpiosetcore(sb_t *sbh)
+{
+ sb_info_t *si;
+
+
+/* mask&set gpiocontrol bits */
+uint32
-+sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
++sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+ sb_info_t *si;
+ uint regoff;
+ si = SB_INFO(sbh);
+ regoff = 0;
+
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
+ switch (si->gpioid) {
+ case SB_CC:
+ regoff = OFFSETOF(chipcregs_t, gpiocontrol);
+ return (0);
+ }
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio output enable bits */
+uint32
-+sb_gpioouten(void *sbh, uint32 mask, uint32 val)
++sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+ sb_info_t *si;
+ uint regoff;
+ si = SB_INFO(sbh);
+ regoff = 0;
+
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
+ switch (si->gpioid) {
+ case SB_CC:
+ regoff = OFFSETOF(chipcregs_t, gpioouten);
+ break;
+ }
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio output bits */
+uint32
-+sb_gpioout(void *sbh, uint32 mask, uint32 val)
++sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+ sb_info_t *si;
+ uint regoff;
+ si = SB_INFO(sbh);
+ regoff = 0;
+
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
+ switch (si->gpioid) {
+ case SB_CC:
+ regoff = OFFSETOF(chipcregs_t, gpioout);
+ break;
+ }
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
++}
++
++/* reserve one gpio */
++uint32
++sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */
++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) {
++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
++ return -1;
++ }
++ /* make sure only one bit is set */
++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
++ return -1;
++ }
++
++ /* already reserved */
++ if (sb_gpioreservation & gpio_bitmask)
++ return -1;
++ /* set reservation */
++ sb_gpioreservation |= gpio_bitmask;
++
++ return sb_gpioreservation;
++}
++
++/* release one gpio */
++/*
++ * releasing the gpio doesn't change the current value on the GPIO last write value
++ * persists till some one overwrites it
++*/
++
++uint32
++sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority)
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */
++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) {
++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
++ return -1;
++ }
++ /* make sure only one bit is set */
++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
++ return -1;
++ }
++
++ /* already released */
++ if (!(sb_gpioreservation & gpio_bitmask))
++ return -1;
++
++ /* clear reservation */
++ sb_gpioreservation &= ~gpio_bitmask;
++
++ return sb_gpioreservation;
+}
+
+/* return the current gpioin register value */
+uint32
-+sb_gpioin(void *sbh)
++sb_gpioin(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint regoff;
+ break;
+ }
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
++ return (sb_corereg(si, si->gpioidx, regoff, 0, 0));
+}
+
+/* mask&set gpio interrupt polarity bits */
+uint32
-+sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
++sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+ sb_info_t *si;
+ uint regoff;
+ si = SB_INFO(sbh);
+ regoff = 0;
+
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
+ switch (si->gpioid) {
+ case SB_CC:
+ regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
+ break;
+ }
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
+/* mask&set gpio interrupt mask bits */
+uint32
-+sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
++sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority)
+{
+ sb_info_t *si;
+ uint regoff;
+ si = SB_INFO(sbh);
+ regoff = 0;
+
++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */
++
++ /* gpios could be shared on router platforms */
++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
++ mask = priority ? (sb_gpioreservation & mask) :
++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
++ val &= mask;
++ }
++
+ switch (si->gpioid) {
+ case SB_CC:
+ regoff = OFFSETOF(chipcregs_t, gpiointmask);
+ break;
+ }
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++ return (sb_corereg(si, si->gpioidx, regoff, mask, val));
+}
+
++/* assign the gpio to an led */
++uint32
++sb_gpioled(sb_t *sbh, uint32 mask, uint32 val)
++{
++ sb_info_t *si;
+
-+/*
-+ * Return the slow clock source.
-+ * Three sources of SLOW CLOCK: LPO, Xtal, PCI
-+ */
-+static uint
-+sb_slowclk_src(void *sbh)
++ si = SB_INFO(sbh);
++ if (si->sb.ccrev < 16)
++ return -1;
++
++ /* gpio led powersave reg */
++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val));
++}
++
++/* mask&set gpio timer val */
++uint32
++sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval)
+{
+ sb_info_t *si;
++ si = SB_INFO(sbh);
++
++ if (si->sb.ccrev < 16)
++ return -1;
++
++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval));
++}
++
++
++/* return the slow clock source - LPO, XTAL, or PCI */
++static uint
++sb_slowclk_src(sb_info_t *si)
++{
+ chipcregs_t *cc;
-+ uint32 v;
+
-+ si = SB_INFO(sbh);
+
-+ ASSERT(sb_coreid(sbh) == SB_CC);
++ ASSERT(sb_coreid(&si->sb) == SB_CC);
+
-+ if (si->ccrev < 6) {
-+ switch (BUSTYPE(si->bustype)) {
-+ case PCMCIA_BUS: return (SCC_SS_XTAL);
-+ case PCI_BUS:
-+ v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
-+ if (v & PCI_CFG_GPIO_SCS)
-+ return (SCC_SS_PCI);
-+ else
-+ return (SCC_SS_XTAL);
-+ default: return (SCC_SS_XTAL);
-+ }
-+ } else if (si->ccrev < 10) {
-+ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
-+ v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
-+ return (v);
-+ } else {
++ if (si->sb.ccrev < 6) {
++ if ((BUSTYPE(si->sb.bustype) == PCI_BUS)
++ && (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS))
++ return (SCC_SS_PCI);
++ else
++ return (SCC_SS_XTAL);
++ } else if (si->sb.ccrev < 10) {
++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
++ return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK);
++ } else /* Insta-clock */
+ return (SCC_SS_XTAL);
-+ }
+}
+
-+/*
-+ * Return the slowclock min or max frequency.
-+ * Three sources of SLOW CLOCK:
-+ * 1. On Chip LPO - 32khz or 160khz
-+ * 2. On Chip Xtal OSC - 20mhz/4*(divider+1)
-+ * 3. External PCI clock - 66mhz/4*(divider+1)
-+ */
++/* return the ILP (slowclock) min or max frequency */
+static uint
-+sb_slowclk_freq(void *sbh, bool max)
++sb_slowclk_freq(sb_info_t *si, bool max)
+{
-+ sb_info_t *si;
+ chipcregs_t *cc;
+ uint32 slowclk;
+ uint div;
+
-+ si = SB_INFO(sbh);
+
-+ ASSERT(sb_coreid(sbh) == SB_CC);
++ ASSERT(sb_coreid(&si->sb) == SB_CC);
+
-+ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx);
+
-+ /* shouldn't be here unless we've established the chip has dynamic power control */
++ /* shouldn't be here unless we've established the chip has dynamic clk control */
+ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
+
-+ slowclk = sb_slowclk_src(sbh);
-+ if (si->ccrev < 6) {
++ slowclk = sb_slowclk_src(si);
++ if (si->sb.ccrev < 6) {
+ if (slowclk == SCC_SS_PCI)
+ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
+ else
+ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
-+ } else if (si->ccrev < 10) {
-+ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
++ } else if (si->sb.ccrev < 10) {
++ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
+ if (slowclk == SCC_SS_LPO)
+ return (max? LPOMAXFREQ : LPOMINFREQ);
+ else if (slowclk == SCC_SS_XTAL)
+ ASSERT(0);
+ } else {
+ /* Chipc rev 10 is InstaClock */
-+ div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHF;
++ div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT;
+ div = 4 * (div + 1);
+ return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
+ }
+}
+
+static void
-+sb_pwrctl_setdelay(void *sbh, void *chipcregs)
++sb_clkctl_setdelay(sb_info_t *si, void *chipcregs)
+{
-+ sb_info_t *si;
+ chipcregs_t * cc;
+ uint slowmaxfreq, pll_delay, slowclk;
+ uint pll_on_delay, fref_sel_delay;
+
-+ si = SB_INFO(sbh);
+ pll_delay = PLL_DELAY;
+
+ /* If the slow clock is not sourced by the xtal then add the xtal_on_delay
-+ * since the xtal will also be powered down by dynamic power control logic.
++ * since the xtal will also be powered down by dynamic clk control logic.
+ */
-+ slowclk = sb_slowclk_src(sbh);
++ slowclk = sb_slowclk_src(si);
+ if (slowclk != SCC_SS_XTAL)
+ pll_delay += XTAL_ON_DELAY;
+
+ /* Starting with 4318 it is ILP that is used for the delays */
-+ slowmaxfreq = sb_slowclk_freq(sbh, (si->ccrev >= 10) ? FALSE : TRUE);
++ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE);
+
+ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
+ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
+ W_REG(&cc->fref_sel_delay, fref_sel_delay);
+}
+
-+/* set or get slow clock divider */
+int
+sb_pwrctl_slowclk(void *sbh, bool set, uint *div)
+{
+ si = SB_INFO(sbh);
+
+ /* chipcommon cores prior to rev6 don't support slowclkcontrol */
-+ if (si->ccrev < 6)
++ if (si->sb.ccrev < 6)
+ return 1;
+
+ /* chipcommon cores rev10 are a whole new ball game */
-+ if (si->ccrev >= 10)
++ if (si->sb.ccrev >= 10)
+ return 1;
+
+ if (set && ((*div % 4) || (*div < 4)))
+ }
+
+ if (set) {
-+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHF));
-+ sb_pwrctl_setdelay(sbh, (void *)cc);
++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT));
++ sb_clkctl_setdelay(sbh, (void *)cc);
+ } else
-+ *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
++ *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
+
+done:
+ sb_setcoreidx(sbh, origidx);
+}
+
+/* initialize power control delay registers */
-+void
-+sb_pwrctl_init(void *sbh)
++void sb_clkctl_init(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint origidx;
+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+ goto done;
+
-+ /* 4317pc does not work with SlowClock less than 5Mhz */
-+ if (BUSTYPE(si->bustype) == PCMCIA_BUS) {
-+ if ((si->ccrev >= 6) && (si->ccrev < 10))
-+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (SCC_DEF_DIV << SCC_CD_SHF));
-+ }
++ /* 4317pc does not work with SlowClock less than 5 MHz */
++ if ((BUSTYPE(si->sb.bustype) == PCMCIA_BUS) && (si->sb.ccrev >= 6) && (si->sb.ccrev < 10))
++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (ILP_DIV_5MHZ << SCC_CD_SHIFT));
++
++ /* set all Instaclk chip ILP to 1 MHz */
++ else if (si->sb.ccrev >= 10)
++ SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
+
-+ sb_pwrctl_setdelay(sbh, (void *)cc);
++ sb_clkctl_setdelay(si, (void *)cc);
+
+done:
+ sb_setcoreidx(sbh, origidx);
+}
-+
++void sb_pwrctl_init(sb_t *sbh)
++{
++sb_clkctl_init(sbh);
++}
+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
+uint16
-+sb_pwrctl_fast_pwrup_delay(void *sbh)
++sb_clkctl_fast_pwrup_delay(sb_t *sbh)
+{
+ sb_info_t *si;
+ uint origidx;
+ fpdelay = 0;
+ origidx = si->curidx;
+
-+ if (BUSTYPE(si->bustype) == SB_BUS)
-+ goto done;
-+
+ INTR_OFF(si, intr_val);
+
+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
+ goto done;
+
-+ slowminfreq = sb_slowclk_freq(sbh, FALSE);
++ slowminfreq = sb_slowclk_freq(si, FALSE);
+ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
+
+done:
+ INTR_RESTORE(si, intr_val);
+ return (fpdelay);
+}
-+
++uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh)
++{
++return sb_clkctl_fast_pwrup_delay(sbh);
++}
+/* turn primary xtal and/or pll off/on */
+int
-+sb_pwrctl_xtal(void *sbh, uint what, bool on)
++sb_clkctl_xtal(sb_t *sbh, uint what, bool on)
+{
+ sb_info_t *si;
+ uint32 in, out, outen;
+
+ si = SB_INFO(sbh);
+
-+ switch (BUSTYPE(si->bustype)) {
++ switch (BUSTYPE(si->sb.bustype)) {
+
+
+ case PCMCIA_BUS:
+
+ case PCI_BUS:
+
++ /* pcie core doesn't have any mapping to control the xtal pu */
++ if (PCIE(si))
++ return -1;
++
+ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
+ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
+ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
+ return (0);
+}
+
-+/* set dynamic power control mode (forceslow, forcefast, dynamic) */
++int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on)
++{
++return sb_clkctl_xtal(sbh,what,on);
++}
++
++/* set dynamic clk control mode (forceslow, forcefast, dynamic) */
+/* returns true if ignore pll off is set and false if it is not */
+bool
-+sb_pwrctl_clk(void *sbh, uint mode)
++sb_clkctl_clk(sb_t *sbh, uint mode)
+{
+ sb_info_t *si;
+ uint origidx;
+
+ si = SB_INFO(sbh);
+
-+ /* chipcommon cores prior to rev6 don't support slowclkcontrol */
-+ if (si->ccrev < 6)
++ /* chipcommon cores prior to rev6 don't support dynamic clock control */
++ if (si->sb.ccrev < 6)
+ return (FALSE);
+
+ /* chipcommon cores rev10 are a whole new ball game */
-+ if (si->ccrev >= 10)
++ if (si->sb.ccrev >= 10)
+ return (FALSE);
+
+ INTR_OFF(si, intr_val);
+ switch (mode) {
+ case CLK_FAST: /* force fast (pll) clock */
+ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
-+ sb_pwrctl_xtal(sbh, XTAL, ON);
++ sb_clkctl_xtal(&si->sb, XTAL, ON);
+
+ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
+ break;
+
-+ case CLK_SLOW: /* force slow clock */
-+ if ((BUSTYPE(si->bustype) == SDIO_BUS) || (BUSTYPE(si->bustype) == PCMCIA_BUS))
-+ return (-1);
-+
-+ if (si->ccrev >= 6)
-+ OR_REG(&cc->slow_clk_ctl, SCC_FS);
-+ break;
-+
-+ case CLK_DYNAMIC: /* enable dynamic power control */
++ case CLK_DYNAMIC: /* enable dynamic clock control */
+ scc = R_REG(&cc->slow_clk_ctl);
+ scc &= ~(SCC_FS | SCC_IP | SCC_XC);
+ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
+
+ /* for dynamic control, we have to release our xtal_pu "force on" */
+ if (scc & SCC_XC)
-+ sb_pwrctl_xtal(sbh, XTAL, OFF);
++ sb_clkctl_xtal(&si->sb, XTAL, OFF);
+ break;
++
++ default:
++ ASSERT(0);
+ }
+
+ /* Is the h/w forcing the use of the fast clk */
+ return (forcefastclk);
+}
+
++bool sb_pwrctl_clk(sb_t *sbh, uint mode)
++{
++return sb_clkctl_clk(sbh, mode);
++}
+/* register driver interrupt disabling and restoring callback functions */
+void
-+sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg)
++sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg)
+{
+ sb_info_t *si;
+
+}
+
+
-diff -Nur linux-2.4.30/drivers/net/hnd/shared_ksyms.sh linux-2.4.30-brcm/drivers/net/hnd/shared_ksyms.sh
---- linux-2.4.30/drivers/net/hnd/shared_ksyms.sh 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/hnd/shared_ksyms.sh 2005-05-22 22:55:51.000000000 +0200
++void
++sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice,
++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif)
++{
++ uint vendor, core, unit;
++ uint chip, chippkg;
++ char varname[8];
++ uint8 class, subclass, progif;
++
++ vendor = sb_corevendor(sbh);
++ core = sb_coreid(sbh);
++ unit = sb_coreunit(sbh);
++
++ chip = BCMINIT(sb_chip)(sbh);
++ chippkg = BCMINIT(sb_chippkg)(sbh);
++
++ progif = 0;
++
++ /* Known vendor translations */
++ switch (vendor) {
++ case SB_VEND_BCM:
++ vendor = VENDOR_BROADCOM;
++ break;
++ }
++
++ /* Determine class based on known core codes */
++ switch (core) {
++ case SB_ILINE20:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM47XX_ILINE_ID;
++ break;
++ case SB_ENET:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM47XX_ENET_ID;
++ break;
++ case SB_SDRAM:
++ case SB_MEMC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_RAM;
++ break;
++ case SB_PCI:
++ case SB_PCIE:
++ class = PCI_CLASS_BRIDGE;
++ subclass = PCI_BRIDGE_PCI;
++ break;
++ case SB_MIPS:
++ case SB_MIPS33:
++ class = PCI_CLASS_CPU;
++ subclass = PCI_CPU_MIPS;
++ break;
++ case SB_CODEC:
++ class = PCI_CLASS_COMM;
++ subclass = PCI_COMM_MODEM;
++ core = BCM47XX_V90_ID;
++ break;
++ case SB_USB:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ core = BCM47XX_USB_ID;
++ break;
++ case SB_USB11H:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ core = BCM47XX_USBH_ID;
++ break;
++ case SB_USB11D:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ core = BCM47XX_USBD_ID;
++ break;
++ case SB_IPSEC:
++ class = PCI_CLASS_CRYPT;
++ subclass = PCI_CRYPT_NETWORK;
++ core = BCM47XX_IPSEC_ID;
++ break;
++ case SB_ROBO:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_OTHER;
++ core = BCM47XX_ROBO_ID;
++ break;
++ case SB_EXTIF:
++ case SB_CC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_FLASH;
++ break;
++ case SB_D11:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_OTHER;
++ /* Let an nvram variable override this */
++ sprintf(varname, "wl%did", unit);
++ if ((core = getintvar(NULL, varname)) == 0) {
++ if (chip == BCM4712_DEVICE_ID) {
++ if (chippkg == BCM4712SMALL_PKG_ID)
++ core = BCM4306_D11G_ID;
++ else
++ core = BCM4306_D11DUAL_ID;
++ }
++ }
++ break;
++
++ default:
++ class = subclass = progif = 0xff;
++ break;
++ }
++
++ *pcivendor = (uint16)vendor;
++ *pcidevice = (uint16)core;
++ *pciclass = class;
++ *pcisubclass = subclass;
++ *pciprogif = progif;
++}
++
++
++
++
++/* use the mdio interface to write to mdio slaves */
++static int
++sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint regaddr, uint val)
++{
++ uint mdiodata;
++ uint i = 0;
++ sbpcieregs_t *pcieregs;
++
++ pcieregs = (sbpcieregs_t*) sb_setcoreidx(&si->sb, si->sb.buscoreidx);
++ ASSERT (pcieregs);
++
++ /* enable mdio access to SERDES */
++ W_REG((&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
++
++ mdiodata = MDIODATA_START | MDIODATA_WRITE |
++ (physmedia << MDIODATA_DEVADDR_SHF) |
++ (regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val;
++
++ W_REG((&pcieregs->mdiodata), mdiodata);
++
++ PR28829_DELAY();
++
++ /* retry till the transaction is complete */
++ while ( i < 10 ) {
++ if (R_REG(&(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) {
++ /* Disable mdio access to SERDES */
++ W_REG((&pcieregs->mdiocontrol), 0);
++ return 0;
++ }
++ OSL_DELAY(1000);
++ i++;
++ }
++
++ SB_ERROR(("sb_pcie_mdiowrite: timed out\n"));
++ /* Disable mdio access to SERDES */
++ W_REG((&pcieregs->mdiocontrol), 0);
++ ASSERT(0);
++ return 1;
++
++}
++
++/* indirect way to read pcie config regs*/
++uint
++sb_pcie_readreg(void *sb, void* arg1, uint offset)
++{
++ sb_info_t *si;
++ sb_t *sbh;
++ uint retval = 0xFFFFFFFF;
++ sbpcieregs_t *pcieregs;
++ uint addrtype;
++
++ sbh = (sb_t *)sb;
++ si = SB_INFO(sbh);
++ ASSERT (PCIE(si));
++
++ pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
++ ASSERT (pcieregs);
++
++ addrtype = (uint)((uintptr)arg1);
++ switch(addrtype) {
++ case PCIE_CONFIGREGS:
++ W_REG((&pcieregs->configaddr),offset);
++ retval = R_REG(&(pcieregs->configdata));
++ break;
++ case PCIE_PCIEREGS:
++ W_REG(&(pcieregs->pcieaddr),offset);
++ retval = R_REG(&(pcieregs->pciedata));
++ break;
++ default:
++ ASSERT(0);
++ break;
++ }
++ return retval;
++}
++
++/* indirect way to write pcie config/mdio/pciecore regs*/
++uint
++sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val)
++{
++ sb_info_t *si;
++ sbpcieregs_t *pcieregs;
++ uint addrtype;
++
++ si = SB_INFO(sbh);
++ ASSERT (PCIE(si));
++
++ pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0);
++ ASSERT (pcieregs);
++
++ addrtype = (uint)((uintptr)arg1);
++
++ switch(addrtype) {
++ case PCIE_CONFIGREGS:
++ W_REG((&pcieregs->configaddr),offset);
++ W_REG((&pcieregs->configdata),val);
++ break;
++ case PCIE_PCIEREGS:
++ W_REG((&pcieregs->pcieaddr),offset);
++ W_REG((&pcieregs->pciedata),val);
++ break;
++ default:
++ ASSERT(0);
++ break;
++ }
++ return 0;
++}
++
++
++/* Build device path. Support SB, PCI, and JTAG for now. */
++int
++sb_devpath(sb_t *sbh, char *path, int size)
++{
++ ASSERT(path);
++ ASSERT(size >= SB_DEVPATH_BUFSZ);
++
++ switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) {
++ case SB_BUS:
++ case JTAG_BUS:
++ sprintf(path, "sb/%u/", sb_coreidx(sbh));
++ break;
++ case PCI_BUS:
++ ASSERT((SB_INFO(sbh))->osh);
++ sprintf(path, "pci/%u/%u/", OSL_PCI_BUS((SB_INFO(sbh))->osh),
++ OSL_PCI_SLOT((SB_INFO(sbh))->osh));
++ break;
++ case PCMCIA_BUS:
++ SB_ERROR(("sb_devpath: OSL_PCMCIA_BUS() not implemented, bus 1 assumed\n"));
++ SB_ERROR(("sb_devpath: OSL_PCMCIA_SLOT() not implemented, slot 1 assumed\n"));
++ sprintf(path, "pc/%u/%u/", 1, 1);
++ break;
++ case SDIO_BUS:
++ SB_ERROR(("sb_devpath: device 0 assumed\n"));
++ sprintf(path, "sd/%u/", sb_coreidx(sbh));
++ break;
++ default:
++ ASSERT(0);
++ break;
++ }
++
++ return 0;
++}
++
++/* Fix chip's configuration. The current core may be changed upon return */
++static int
++sb_pci_fixcfg(sb_info_t *si)
++{
++ uint origidx, pciidx;
++ sbpciregs_t *pciregs;
++ sbpcieregs_t *pcieregs;
++ uint16 val16, *reg16;
++ char name[SB_DEVPATH_BUFSZ+16], *value;
++ char devpath[SB_DEVPATH_BUFSZ];
++
++ ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS);
++
++ /* Fix PCI(e) SROM shadow area */
++ /* save the current index */
++ origidx = sb_coreidx(&si->sb);
++
++ /* check 'pi' is correct and fix it if not */
++ if (si->sb.buscoretype == SB_PCIE) {
++ pcieregs = (sbpcieregs_t *)sb_setcore(&si->sb, SB_PCIE, 0);
++ ASSERT(pcieregs);
++ reg16 = &pcieregs->sprom[SRSH_PI_OFFSET];
++ }
++ else if (si->sb.buscoretype == SB_PCI) {
++ pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0);
++ ASSERT(pciregs);
++ reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
++ }
++ else {
++ ASSERT(0);
++ return -1;
++ }
++ pciidx = sb_coreidx(&si->sb);
++ val16 = R_REG(reg16);
++ if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) {
++ val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK);
++ W_REG(reg16, val16);
++ }
++
++ /* restore the original index */
++ sb_setcoreidx(&si->sb, origidx);
++
++ /* Fix bar0window */
++ /* !do it last, it changes the current core! */
++ if (sb_devpath(&si->sb, devpath, sizeof(devpath)))
++ return -1;
++ sprintf(name, "%sb0w", devpath);
++ if ((value = getvar(NULL, name))) {
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32),
++ bcm_strtoul(value, NULL, 16));
++ /* update curidx since the current core is changed */
++ si->curidx = _sb_coreidx(si);
++ if (si->curidx == BADIDX) {
++ SB_ERROR(("sb_pci_fixcfg: bad core index\n"));
++ return -1;
++ }
++ }
++
++ return 0;
++}
++
+diff -urN linux.old/drivers/net/hnd/shared_ksyms.sh linux.dev/drivers/net/hnd/shared_ksyms.sh
+--- linux.old/drivers/net/hnd/shared_ksyms.sh 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/hnd/shared_ksyms.sh 2005-11-07 21:57:07.917590250 +0100
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+for file in $* ; do
+ ${NM} $file | sed -ne 's/[0-9A-Fa-f]* [DT] \([^ ]*\)/extern void \1; EXPORT_SYMBOL(\1);/p'
+done
-diff -Nur linux-2.4.30/drivers/net/Makefile linux-2.4.30-brcm/drivers/net/Makefile
---- linux-2.4.30/drivers/net/Makefile 2005-01-19 15:09:56.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/Makefile 2005-05-25 19:07:52.000000000 +0200
-@@ -3,6 +3,8 @@
- # Makefile for the Linux network (ethercard) device drivers.
- #
-
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- obj-y :=
- obj-m :=
- obj-n :=
-@@ -21,6 +23,8 @@
- list-multi := rcpci.o
- rcpci-objs := rcpci45.o rclanmtl.o
-
-+subdir-m += diag
-+
- ifeq ($(CONFIG_TULIP),y)
- obj-y += tulip/tulip.o
- endif
-@@ -39,6 +43,9 @@
- obj-$(CONFIG_ISDN) += slhc.o
- endif
-
-+subdir-$(CONFIG_HND) += hnd
-+subdir-$(CONFIG_ET) += et
-+subdir-$(CONFIG_WL) += wl
- subdir-$(CONFIG_NET_PCMCIA) += pcmcia
- subdir-$(CONFIG_NET_WIRELESS) += wireless
- subdir-$(CONFIG_TULIP) += tulip
-@@ -69,6 +76,16 @@
- obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
- obj-$(CONFIG_SUNGEM) += sungem.o
-
-+ifeq ($(CONFIG_HND),y)
-+ obj-y += hnd/hnd.o
-+endif
-+ifeq ($(CONFIG_ET),y)
-+ obj-y += et/et.o
-+endif
-+ifeq ($(CONFIG_WL),y)
-+ obj-y += wl/wl.o
-+endif
-+
- obj-$(CONFIG_MACE) += mace.o
- obj-$(CONFIG_BMAC) += bmac.o
- obj-$(CONFIG_GMAC) += gmac.o
-@@ -265,6 +282,7 @@
- endif
- endif
-
-+
- include $(TOPDIR)/Rules.make
-
- clean:
-diff -Nur linux-2.4.30/drivers/net/wireless/Config.in linux-2.4.30-brcm/drivers/net/wireless/Config.in
---- linux-2.4.30/drivers/net/wireless/Config.in 2004-11-17 12:54:21.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/wireless/Config.in 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/net/wireless/Config.in linux.dev/drivers/net/wireless/Config.in
+--- linux.old/drivers/net/wireless/Config.in 2005-11-07 23:12:51.258929250 +0100
++++ linux.dev/drivers/net/wireless/Config.in 2005-11-07 21:57:07.941591750 +0100
@@ -13,6 +13,7 @@
fi
dep_tristate ' Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)' CONFIG_PLX_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
dep_tristate ' Hermes in TMD7160/NCP130 based PCI adaptor support (Pheecom WL-PCI etc.) (EXPERIMENTAL)' CONFIG_TMD_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
dep_tristate ' Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)' CONFIG_PCI_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL
-diff -Nur linux-2.4.30/drivers/net/wl/Makefile linux-2.4.30-brcm/drivers/net/wl/Makefile
---- linux-2.4.30/drivers/net/wl/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/net/wl/Makefile 2005-05-26 12:04:50.000000000 +0200
+diff -urN linux.old/drivers/net/wl/Makefile linux.dev/drivers/net/wl/Makefile
+--- linux.old/drivers/net/wl/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/net/wl/Makefile 2005-11-07 21:57:07.941591750 +0100
@@ -0,0 +1,26 @@
+#
+# Makefile for the Broadcom wl driver
+obj-m := $(O_TARGET)
+
+include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.30/drivers/parport/Config.in linux-2.4.30-brcm/drivers/parport/Config.in
---- linux-2.4.30/drivers/parport/Config.in 2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/parport/Config.in 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/parport/Config.in linux.dev/drivers/parport/Config.in
+--- linux.old/drivers/parport/Config.in 2005-11-07 23:12:51.306932250 +0100
++++ linux.dev/drivers/parport/Config.in 2005-11-07 21:57:07.941591750 +0100
@@ -11,6 +11,7 @@
tristate 'Parallel port support' CONFIG_PARPORT
if [ "$CONFIG_PARPORT" != "n" ]; then
if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then
if [ "$CONFIG_SERIAL" = "m" ]; then
define_tristate CONFIG_PARPORT_PC_CML1 m
-diff -Nur linux-2.4.30/drivers/parport/Makefile linux-2.4.30-brcm/drivers/parport/Makefile
---- linux-2.4.30/drivers/parport/Makefile 2004-08-08 01:26:05.000000000 +0200
-+++ linux-2.4.30-brcm/drivers/parport/Makefile 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/parport/Makefile linux.dev/drivers/parport/Makefile
+--- linux.old/drivers/parport/Makefile 2005-11-07 23:12:51.318933000 +0100
++++ linux.dev/drivers/parport/Makefile 2005-11-07 21:57:07.941591750 +0100
@@ -22,6 +22,7 @@
obj-$(CONFIG_PARPORT) += parport.o
obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o
obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o
obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o
-diff -Nur linux-2.4.30/drivers/parport/parport_splink.c linux-2.4.30-brcm/drivers/parport/parport_splink.c
---- linux-2.4.30/drivers/parport/parport_splink.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/parport/parport_splink.c 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/parport/parport_splink.c linux.dev/drivers/parport/parport_splink.c
+--- linux.old/drivers/parport/parport_splink.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/parport/parport_splink.c 2005-11-07 21:57:07.941591750 +0100
@@ -0,0 +1,345 @@
+/* Low-level parallel port routines for the ASUS WL-500g built-in port
+ *
+module_init(parport_splink_init)
+module_exit(parport_splink_cleanup)
+
-diff -Nur linux-2.4.30/drivers/pcmcia/bcm4710_generic.c linux-2.4.30-brcm/drivers/pcmcia/bcm4710_generic.c
---- linux-2.4.30/drivers/pcmcia/bcm4710_generic.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/pcmcia/bcm4710_generic.c 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/pcmcia/Makefile linux.dev/drivers/pcmcia/Makefile
+--- linux.old/drivers/pcmcia/Makefile 2005-11-07 23:12:51.350935000 +0100
++++ linux.dev/drivers/pcmcia/Makefile 2005-11-07 21:57:07.941591750 +0100
+@@ -74,6 +74,10 @@
+ au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3) += au1000_hydrogen3.o
+ au1000_ss-objs-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
+
++obj-$(CONFIG_PCMCIA_BCM4710) += bcm4710_ss.o
++bcm4710_ss-objs := bcm4710_generic.o
++bcm4710_ss-objs += bcm4710_pcmcia.o
++
+ obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
+ obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
+ obj-$(CONFIG_PCMCIA_SIBYTE) += sibyte_generic.o
+@@ -112,5 +116,8 @@
+ au1x00_ss.o: $(au1000_ss-objs-y)
+ $(LD) -r -o $@ $(au1000_ss-objs-y)
+
++bcm4710_ss.o: $(bcm4710_ss-objs)
++ $(LD) -r -o $@ $(bcm4710_ss-objs)
++
+ yenta_socket.o: $(yenta_socket-objs)
+ $(LD) $(LD_RFLAG) -r -o $@ $(yenta_socket-objs)
+diff -urN linux.old/drivers/pcmcia/bcm4710_generic.c linux.dev/drivers/pcmcia/bcm4710_generic.c
+--- linux.old/drivers/pcmcia/bcm4710_generic.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/pcmcia/bcm4710_generic.c 2005-11-07 21:57:07.945592000 +0100
@@ -0,0 +1,912 @@
+/*
+ *
+
+
+#endif /* defined(CONFIG_PROC_FS) */
-diff -Nur linux-2.4.30/drivers/pcmcia/bcm4710_pcmcia.c linux-2.4.30-brcm/drivers/pcmcia/bcm4710_pcmcia.c
---- linux-2.4.30/drivers/pcmcia/bcm4710_pcmcia.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/pcmcia/bcm4710_pcmcia.c 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/pcmcia/bcm4710_pcmcia.c linux.dev/drivers/pcmcia/bcm4710_pcmcia.c
+--- linux.old/drivers/pcmcia/bcm4710_pcmcia.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/pcmcia/bcm4710_pcmcia.c 2005-11-07 21:57:07.945592000 +0100
@@ -0,0 +1,266 @@
+/*
+ * BCM4710 specific pcmcia routines.
+ bcm4710_pcmcia_configure_socket
+};
+
-diff -Nur linux-2.4.30/drivers/pcmcia/bcm4710pcmcia.h linux-2.4.30-brcm/drivers/pcmcia/bcm4710pcmcia.h
---- linux-2.4.30/drivers/pcmcia/bcm4710pcmcia.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/pcmcia/bcm4710pcmcia.h 2005-05-22 22:55:52.000000000 +0200
+diff -urN linux.old/drivers/pcmcia/bcm4710pcmcia.h linux.dev/drivers/pcmcia/bcm4710pcmcia.h
+--- linux.old/drivers/pcmcia/bcm4710pcmcia.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/pcmcia/bcm4710pcmcia.h 2005-11-07 21:57:07.945592000 +0100
@@ -0,0 +1,118 @@
+/*
+ *
+extern struct pcmcia_low_level bcm4710_pcmcia_ops;
+
+#endif /* !defined(_BCM4710PCMCIA_H) */
-diff -Nur linux-2.4.30/drivers/pcmcia/Makefile linux-2.4.30-brcm/drivers/pcmcia/Makefile
---- linux-2.4.30/drivers/pcmcia/Makefile 2004-02-18 14:36:31.000000000 +0100
-+++ linux-2.4.30-brcm/drivers/pcmcia/Makefile 2005-05-22 22:55:52.000000000 +0200
-@@ -65,6 +65,10 @@
- au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o
- au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o
-
-+obj-$(CONFIG_PCMCIA_BCM4710) += bcm4710_ss.o
-+bcm4710_ss-objs := bcm4710_generic.o
-+bcm4710_ss-objs += bcm4710_pcmcia.o
-+
- obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
- obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
- obj-$(CONFIG_PCMCIA_SIBYTE) += sibyte_generic.o
-@@ -102,5 +106,8 @@
- au1x00_ss.o: $(au1000_ss-objs-y)
- $(LD) -r -o $@ $(au1000_ss-objs-y)
-
-+bcm4710_ss.o: $(bcm4710_ss-objs)
-+ $(LD) -r -o $@ $(bcm4710_ss-objs)
-+
- yenta_socket.o: $(yenta_socket-objs)
- $(LD) $(LD_RFLAG) -r -o $@ $(yenta_socket-objs)
-diff -Nur linux-2.4.30/include/asm-mips/bootinfo.h linux-2.4.30-brcm/include/asm-mips/bootinfo.h
---- linux-2.4.30/include/asm-mips/bootinfo.h 2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.30-brcm/include/asm-mips/bootinfo.h 2005-05-22 22:55:53.000000000 +0200
+diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
+--- linux.old/include/asm-mips/bootinfo.h 2005-11-07 23:12:51.434940250 +0100
++++ linux.dev/include/asm-mips/bootinfo.h 2005-11-07 21:57:07.945592000 +0100
@@ -37,6 +37,7 @@
#define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */
#define MACH_GROUP_LASAT 21
/*
* Valid machtype values for group unknown (low order halfword of mips_machtype)
-@@ -194,6 +195,15 @@
+@@ -197,6 +198,15 @@
#define MACH_TANBAC_TB0229 7 /* TANBAC TB0229 (VR4131DIMM) */
/*
* Valid machtype for group TITAN
*/
#define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
-diff -Nur linux-2.4.30/include/asm-mips/cpu.h linux-2.4.30-brcm/include/asm-mips/cpu.h
---- linux-2.4.30/include/asm-mips/cpu.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-2.4.30-brcm/include/asm-mips/cpu.h 2005-05-22 22:55:53.000000000 +0200
+diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
+--- linux.old/include/asm-mips/cpu.h 2005-11-07 23:12:51.434940250 +0100
++++ linux.dev/include/asm-mips/cpu.h 2005-11-07 21:57:07.965593250 +0100
@@ -22,6 +22,11 @@
spec.
*/
/*
* ISA Level encodings
-diff -Nur linux-2.4.30/include/asm-mips/r4kcache.h linux-2.4.30-brcm/include/asm-mips/r4kcache.h
---- linux-2.4.30/include/asm-mips/r4kcache.h 2004-02-18 14:36:32.000000000 +0100
-+++ linux-2.4.30-brcm/include/asm-mips/r4kcache.h 2005-05-25 18:01:08.000000000 +0200
-@@ -567,4 +567,17 @@
+diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h
+--- linux.old/include/asm-mips/r4kcache.h 2005-11-07 23:12:51.438940500 +0100
++++ linux.dev/include/asm-mips/r4kcache.h 2005-11-07 21:57:08.161605500 +0100
+@@ -658,4 +658,17 @@
cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
+}
+
#endif /* __ASM_R4KCACHE_H */
-diff -Nur linux-2.4.30/include/asm-mips/serial.h linux-2.4.30-brcm/include/asm-mips/serial.h
---- linux-2.4.30/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-2.4.30-brcm/include/asm-mips/serial.h 2005-05-22 22:55:53.000000000 +0200
+diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
+--- linux.old/include/asm-mips/serial.h 2005-11-07 23:12:51.442940750 +0100
++++ linux.dev/include/asm-mips/serial.h 2005-11-07 21:57:07.993595000 +0100
@@ -223,6 +223,13 @@
#define TXX927_SERIAL_PORT_DEFNS
#endif
COBALT_SERIAL_PORT_DEFNS \
DDB5477_SERIAL_PORT_DEFNS \
EV96100_SERIAL_PORT_DEFNS \
-diff -Nur linux-2.4.30/init/do_mounts.c linux-2.4.30-brcm/init/do_mounts.c
---- linux-2.4.30/init/do_mounts.c 2003-11-28 19:26:21.000000000 +0100
-+++ linux-2.4.30-brcm/init/do_mounts.c 2005-05-22 22:55:53.000000000 +0200
-@@ -253,7 +253,13 @@
+diff -urN linux.old/init/do_mounts.c linux.dev/init/do_mounts.c
+--- linux.old/init/do_mounts.c 2005-11-07 23:12:51.458941750 +0100
++++ linux.dev/init/do_mounts.c 2005-11-07 21:57:07.993595000 +0100
+@@ -254,7 +254,13 @@
{ "ftlb", 0x2c08 },
{ "ftlc", 0x2c10 },
{ "ftld", 0x2c18 },
{ "nb", 0x2b00 },
{ NULL, 0 }
};
-diff -Nur linux-2.4.30/Makefile linux-2.4.30-brcm/Makefile
---- linux-2.4.30/Makefile 2005-04-04 03:42:20.000000000 +0200
-+++ linux-2.4.30-brcm/Makefile 2005-05-22 22:55:53.000000000 +0200
-@@ -17,9 +17,9 @@
- FINDHPATH = $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net $(HPATH)/math-emu
-
- HOSTCC = gcc
--HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-+HOSTCFLAGS = -Wall -Wstrict-prototypes -Os -fomit-frame-pointer
-
--CROSS_COMPILE =
-+CROSS_COMPILE=
-
- #
- # Include the make variables (CC, etc...)
-@@ -91,8 +91,10 @@
-
- CPPFLAGS := -D__KERNEL__ -I$(HPATH)
-
--CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common
-+
-+
- ifndef CONFIG_FRAME_POINTER
- CFLAGS += -fomit-frame-pointer
- endif
-@@ -354,7 +356,7 @@
- @rm -f .ver1
-
- include/linux/version.h: ./Makefile
-- @expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
-+ @-expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
- (echo KERNELRELEASE \"$(KERNELRELEASE)\" exceeds $(uts_len) characters >&2; false)
- @echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" > .ver
- @echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)` >> .ver
-@@ -500,7 +502,7 @@
- ifdef CONFIG_MODVERSIONS
- $(MAKE) update-modverfile
- endif
-- scripts/mkdep -- `find $(FINDHPATH) \( -name SCCS -o -name .svn \) -prune -o -follow -name \*.h ! -name modversions.h -print` > .hdepend
-+ (find $(FINDHPATH) \( -name SCCS -o -name .svn \) -prune -o -follow -name \*.h ! -name modversions.h -print | xargs -r scripts/mkdep -- ) > .hdepend
- scripts/mkdep -- init/*.c > .depend
-
- ifdef CONFIG_MODVERSIONS
-diff -Nur linux-2.4.30/Rules.make linux-2.4.30-brcm/Rules.make
---- linux-2.4.30/Rules.make 2004-02-18 14:36:30.000000000 +0100
-+++ linux-2.4.30-brcm/Rules.make 2005-05-26 17:11:14.000000000 +0200
-@@ -176,7 +176,14 @@
- _modinst__: dummy
- ifneq "$(strip $(ALL_MOBJS))" ""
- mkdir -p $(MODLIB)/kernel/$(MOD_DESTDIR)
-- cp $(sort $(ALL_MOBJS)) $(MODLIB)/kernel/$(MOD_DESTDIR)
-+ #@cp $(sort $(ALL_MOBJS)) $(MODLIB)/kernel/$(MOD_DESTDIR)
-+ for f in $(ALL_MOBJS) ; do \
-+ $(OBJCOPY) -R __ksymtab -R .comment -R .note -x \
-+ `$(NM) $$f | cut -f3- -d' ' | sed -n \
-+ -e 's/__module_parm_\(.*\)/-K \1/p' \
-+ -e 's/__ks..tab_\(.*\)/-K \1/p'` \
-+ $$f $(MODLIB)/kernel/$(MOD_DESTDIR)$(MOD_TARGET)$$f; \
-+ done
- endif
-
- .PHONY: modules_install
projects / openwrt.git / blobdiff