#include <stdio.h>
#include <stdlib.h>
-@@ -130,109 +60,103 @@
+@@ -130,109 +60,103 @@ fprintf(stderr, "#ERR %s: " fmt "\n", __
*/
#define AR5K_GPIODI 0x401c
#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband?) -5210 only */
#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset -5210 only */
#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
-@@ -253,7 +177,7 @@
+@@ -253,7 +177,7 @@ static const struct ath5k_srev_name ath5
#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* not on 5210 */
#define AR5K_PCICFG 0x4010 /* Register Address */
#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
#define AR5K_PCICFG_EESIZE_S 3
-@@ -264,26 +188,118 @@
+@@ -264,26 +188,118 @@ static const struct ath5k_srev_name ath5
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status (5210) */
#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
-@@ -291,43 +307,163 @@
+@@ -291,43 +307,163 @@ static const struct ath5k_srev_name ath5
/*
* EEPROM status register
*/
/*
* Read data by masking
-@@ -350,7 +486,6 @@
+@@ -350,7 +486,6 @@ static const struct ath5k_srev_name ath5
(*((volatile u_int32_t *)(mem + (_reg))) = (_val))
#endif
#define AR5K_REG_ENABLE_BITS(_reg, _flags) \
AR5K_REG_WRITE(_reg, AR5K_REG_READ(_reg) | (_flags))
-@@ -359,7 +494,12 @@
+@@ -359,7 +494,12 @@ static const struct ath5k_srev_name ath5
#define AR5K_TUNE_REGISTER_TIMEOUT 20000
struct eeprom_entry {
const char *name;
int addr;
-@@ -375,8 +515,6 @@
+@@ -375,8 +515,6 @@ static const struct eeprom_entry eeprom_
{"regdomain", AR5K_EEPROM_REG_DOMAIN},
};
static int force_write = 0;
static int verbose = 0;
-@@ -398,8 +536,8 @@
+@@ -398,8 +536,8 @@ static u_int32_t ath5k_hw_bitswap(u_int3
/*
* Get the PHY Chip revision
*/
{
int i;
u_int32_t srev;
-@@ -427,7 +565,7 @@
+@@ -427,7 +565,7 @@ ath5k_hw_radio_revision(u_int16_t mac_ve
for (i = 0; i < 8; i++)
AR5K_REG_WRITE(AR5K_PHY(0x20), 0x00010000);
srev = AR5K_REG_READ(AR5K_PHY(256) >> 28) & 0xf;
ret = (u_int16_t)ath5k_hw_bitswap(srev, 4) + 1;
-@@ -447,9 +585,8 @@
+@@ -447,9 +585,8 @@ ath5k_hw_radio_revision(u_int16_t mac_ve
/*
* Write to EEPROM
*/
{
u_int32_t status, timeout;
-@@ -457,7 +594,7 @@
+@@ -457,7 +594,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
* Initialize EEPROM access
*/
AR5K_REG_ENABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_EEAE);
-@@ -466,7 +603,7 @@
+@@ -466,7 +603,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
} else {
/* not 5210 */
AR5K_REG_WRITE(AR5K_EEPROM_CMD, AR5K_EEPROM_CMD_RESET);
usleep(5);
-@@ -484,7 +621,7 @@
+@@ -484,7 +621,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
status = AR5K_REG_READ(AR5K_EEPROM_STATUS);
if (status & AR5K_EEPROM_STAT_WRDONE) {
if (status & AR5K_EEPROM_STAT_WRERR) {
offset);
return 1;
}
-@@ -499,16 +636,15 @@
+@@ -499,16 +636,15 @@ ath5k_hw_eeprom_write(void *mem, u_int32
/*
* Read from EEPROM
*/
AR5K_REG_ENABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_EEAE);
(void)AR5K_REG_READ(AR5K_EEPROM_BASE + (4 * offset));
} else {
-@@ -531,50 +667,701 @@
+@@ -531,50 +667,701 @@ ath5k_hw_eeprom_read(void *mem, u_int32_
return 1;
}
{
#define MAX_NR_WRITES 16
struct {
-@@ -635,7 +1422,7 @@
+@@ -635,7 +1422,7 @@ do_write_pairs(int anr, int argc, char *
}
anr++;
i++;
if (!(wr_ops_len = i)) {
err("no (addr,val) pairs given");
-@@ -702,20 +1489,22 @@
+@@ -702,20 +1489,22 @@ do_write_pairs(int anr, int argc, char *
}
return errors ? 11 : 0;
"<base_address> device base address (see lspci output)\n\n");
fprintf(stderr,
-@@ -725,8 +1514,8 @@
+@@ -725,8 +1514,8 @@ static void usage(const char *n)
" %s -w <base_address> regdomain N\n\n"
"- set a PCI id field to value N:\n"
" %s -w <base_address> <field> N\n"
fprintf(stderr, " %s", eeprom_addr[i].name);
fprintf(stderr, "\n\n");
fprintf(stderr,
-@@ -739,19 +1528,457 @@
+@@ -739,19 +1528,457 @@ static void usage(const char *n)
"unlawful radio transmissions!\n\n");
}
struct {
int valid;
-@@ -759,7 +1986,7 @@
+@@ -759,7 +1986,7 @@ CMD(athinfo)(int argc, char *argv[])
} gpio_set[AR5K_NUM_GPIO];
int nr_gpio_set = 0;
gpio_set[i].valid = 0;
if (argc < 2) {
-@@ -769,6 +1996,15 @@
+@@ -769,6 +1996,15 @@ CMD(athinfo)(int argc, char *argv[])
while (anr < argc && argv[anr][0] == '-') {
switch (argv[anr][1]) {
case 'w':
do_write = 1;
break;
-@@ -777,7 +2013,7 @@
+@@ -777,7 +2013,7 @@ CMD(athinfo)(int argc, char *argv[])
if (strlen(argv[anr]) != 3 || argv[anr][1] != ':' ||
argv[anr][0] < '0' || argv[anr][0] > '5' ||
(argv[anr][2] != '0' && argv[anr][2] != '1')) {
return 2;
}
gpio_set[argv[anr][0] - '0'].valid = 1;
-@@ -797,6 +2033,25 @@
+@@ -797,6 +2033,25 @@ CMD(athinfo)(int argc, char *argv[])
do_dump = 1;
break;
case 'h':
usage(argv[0]);
return 0;
-@@ -805,10 +2060,10 @@
+@@ -805,10 +2060,10 @@ CMD(athinfo)(int argc, char *argv[])
default:
err("unknown option %s", argv[anr]);
return 2;
if (anr >= argc) {
err("missing device address");
-@@ -816,7 +2071,7 @@
+@@ -816,7 +2071,7 @@ CMD(athinfo)(int argc, char *argv[])
return 3;
}
fd = open("/dev/mem", O_RDWR);
if (fd < 0) {
-@@ -828,7 +2083,7 @@
+@@ -828,7 +2083,7 @@ CMD(athinfo)(int argc, char *argv[])
MAP_SHARED | MAP_FILE, fd, dev_addr);
if (mem == MAP_FAILED) {
"%s\n", dev_addr, AR5K_PCI_MEM_SIZE, strerror(errno));
return -3;
}
-@@ -856,10 +2111,31 @@
+@@ -856,10 +2111,31 @@ CMD(athinfo)(int argc, char *argv[])
AR5K_REG_DISABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_SPWR_DN);
usleep(500);
error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_MAGIC, &ee_magic,
mac_version);
-@@ -872,157 +2148,114 @@
+@@ -872,157 +2148,114 @@ CMD(athinfo)(int argc, char *argv[])
printf("Warning: Invalid EEPROM Magic number!\n");
}
AR5K_REG_READ(AR5K_GPIOCR), AR5K_REG_READ(AR5K_GPIODO),
AR5K_REG_READ(AR5K_GPIODI));
-@@ -1030,18 +2263,18 @@
+@@ -1030,18 +2263,18 @@ CMD(athinfo)(int argc, char *argv[])
u_int16_t data;
FILE *dumpfile = fopen("ath-eeprom-dump.bin", "w");
fwrite(&data, 2, 1, dumpfile);
}
printf("\n==============================================\n");
-@@ -1054,18 +2287,18 @@
+@@ -1054,18 +2287,18 @@ CMD(athinfo)(int argc, char *argv[])
u_int32_t old_cr = rcr, old_do = rdo;
int rc;
if (gpio_set[i].valid) {
rcr |= AR5K_GPIOCR_OUT(i); /* we use mode 3 */
rcr &= ~AR5K_GPIOCR_INT_SEL(i);
-@@ -1111,5 +2344,17 @@
+@@ -1111,5 +2344,17 @@ CMD(athinfo)(int argc, char *argv[])
return rc;
}
projects / openwrt.git / blobdiff