[package] base-files: check for libpthread_so.a instead of libc_so.a (some gcc/libc...

[openwrt.git] / package / hostap-driver / Makefile

diff --git a/package/hostap-driver/Makefile b/package/hostap-driver/Makefile
index 0b526b6..6841fcd 100644 (file)
--- a/package/hostap-driver/Makefile
+++ b/package/hostap-driver/Makefile
@@ -4,7 +4,6 @@
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-# $Id$
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
@@ -25,33 +24,37 @@ endif
 define KernelPackage/hostap/Default/2.4
   VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
 endef
+
 define KernelPackage/hostap/Default/2.6
   VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
 endef
+
 define KernelPackage/hostap/Default
+$(call KernelPackage/hostap/Default/$(KERNEL))
   SUBMENU:=Wireless Drivers
-  DESCRIPTION:=\
-       Host AP is a driver for 802.11b wireless cards based on Intersil \\\
-       Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
-       card to act as an IEEE 802.11 access point.
   URL:=http://hostap.epitest.fi/
-  $(call KernelPackage/hostap/Default/$(KERNEL))
+endef
+
+define KernelPackage/hostap/Default/description
+ Host AP is a driver for 802.11b wireless cards based on Intersil 
+ Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the 
+ card to act as an IEEE 802.11 access point.
 endef
 
 
 define KernelPackage/hostap
-  $(call KernelPackage/hostap/Default)
-  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-ieee80211 +kmod-crypto
+$(call KernelPackage/hostap/Default)
   TITLE:=Host AP support for Prism2/2.5/3
-  KCONFIG:=CONFIG_HOSTAP
-  DESCRIPTION+=\\\
-       \\\
-       This package contains the base Host AP driver code that is shared by \\\
-       different hardware models. You will also need to enable support for \\\
-       PLX/PCI/CS version of the driver to actually use the driver.
+  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32):kmod-ieee80211 +LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32:kmod-lib80211 +wireless-tools
+  KCONFIG:=CONFIG_HOSTAP CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+  PROVIDES:=kmod-hostap
 endef
+
 define KernelPackage/hostap/2.4
-  DEPENDS:=+kmod-crypto
+# NOTE: needed to remove the dependency on kmod-ieee80211 in the final ipkg
+  DEPENDS:=
+# NOTE: needed to build the standalone version on 2.4
+  KCONFIG:=
   FILES:= \
        $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
@@ -59,53 +62,97 @@ define KernelPackage/hostap/2.4
        $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp)
 endef
+
 define KernelPackage/hostap/2.6
   FILES:= \
        $(LINUX_DIR)/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,60,hostap)
 endef
 
+define KernelPackage/hostap/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the base Host AP driver code that is shared by 
+ different hardware models. You will also need to enable support for 
+ PLX/PCI/CS version of the driver to actually use the driver.
+endef
+
+
+define KernelPackage/hostap-cs
+$(call KernelPackage/hostap/Default)
+  TITLE:=Host AP driver for PCMCIA adaptors
+  DEPENDS:=@PCMCIA_SUPPORT kmod-hostap +kmod-pcmcia-core
+  KCONFIG:=CONFIG_HOSTAP_CS
+  AUTOLOAD:=$(call AutoLoad,60,hostap_cs)
+endef
+define KernelPackage/hostap-cs/2.4
+# NOTE: needed to build the standalone version on 2.4
+  KCONFIG:=
+  FILES:= \
+       $(PKG_BUILD_DIR)/driver/modules/hostap_cs.$(LINUX_KMOD_SUFFIX)
+endef
+define KernelPackage/hostap-cs/2.6
+  FILES:= \
+       $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.$(LINUX_KMOD_SUFFIX)
+endef
+
+define KernelPackage/hostap-cs/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2/2.5/3 PC cards.
+endef
+
 
 define KernelPackage/hostap-pci
-  $(call KernelPackage/hostap/Default)
-  DEPENDS:=kmod-hostap
+$(call KernelPackage/hostap/Default)
   TITLE:=Host AP driver for PCI adaptors
+  DEPENDS:=@PCI_SUPPORT kmod-hostap
   KCONFIG:=CONFIG_HOSTAP_PCI
-  DESCRIPTION+=\\\
-       \\\
-       This package contains the Host AP driver for Prism2.5 PCI adaptors.
   AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
 endef
+
 define KernelPackage/hostap-pci/2.4
+# NOTE: needed to build the standalone version on 2.4
+  KCONFIG:=
   FILES:= \
        $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX)
 endef
+
 define KernelPackage/hostap-pci/2.6
   FILES:= \
        $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
 endef
 
+define KernelPackage/hostap-pci/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2.5 PCI adaptors.
+endef
+
 
 define KernelPackage/hostap-plx
-  $(call KernelPackage/hostap/Default)
-  DEPENDS:=kmod-hostap
-  KCONFIG:=CONFIG_HOSTAP_PLX
+$(call KernelPackage/hostap/Default)
   TITLE:=Host AP driver for PLX9052 based PCI adaptors
-  DESCRIPTION+=\\\
-       \\\
-       This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
-       based PCI adaptors.
+  DEPENDS:=@PCI_SUPPORT kmod-hostap
+  KCONFIG:=CONFIG_HOSTAP_PLX
   AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
 endef
+
 define KernelPackage/hostap-plx/2.4
+# NOTE: needed to build the standalone version on 2.4
+  KCONFIG:=
   FILES:= \
        $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX)
 endef
+
 define KernelPackage/hostap-plx/2.6
   FILES:= \
        $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)
 endef
 
+define KernelPackage/hostap-plx/description
+$(call KernelPackage/hostap/Default/description)
+ This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 
+ based PCI adaptors.
+endef
+
 
 ifeq ($(KERNEL),2.4)
   define Build/Compile
@@ -127,7 +174,12 @@ else
   endef
 endif
 
+define KernelPackage/hostap/install
+       $(INSTALL_DIR) $(1)/lib/wifi
+       $(INSTALL_DATA) ./files/lib/wifi/hostap.sh $(1)/lib/wifi
+endef
 
 $(eval $(call KernelPackage,hostap))
+$(eval $(call KernelPackage,hostap-cs))
 $(eval $(call KernelPackage,hostap-pci))
 $(eval $(call KernelPackage,hostap-plx))