#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
OTHER_MENU:=Other modules
$(eval $(call KernelPackage,crc-itu-t))
+define KernelPackage/crc-ccitt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC-CCITT support
+ KCONFIG:=CONFIG_CRC_CCITT
+ FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+endef
+
+define KernelPackage/crc-ccitt/description
+ Kernel module for CRC-CCITT support
+endef
+
+$(eval $(call KernelPackage,crc-ccitt))
+
+
+define KernelPackage/crc7
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC7 support
+ KCONFIG:=CONFIG_CRC7
+ FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc7)
+endef
+
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support
+endef
+
+$(eval $(call KernelPackage,crc7))
+
+
+define KernelPackage/crc16
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC16 support
+ KCONFIG:=CONFIG_CRC16
+ FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc16)
+endef
+
+define KernelPackage/crc16/description
+ Kernel module for CRC16 support
+endef
+
+$(eval $(call KernelPackage,crc16))
+
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_EEPROM_93CX6
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.29)),1)
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+else
FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+endif
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
$(eval $(call KernelPackage,lp))
+define KernelPackage/pcspkr
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PC speaker support
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_PCSPKR
+ FILES:= \
+ $(LINUX_DIR)/drivers/input/misc/pcspkr.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50, \
+ pcspkr \
+ )
+endef
+
+define KernelPackage/pcspkr/description
+ This enables sounds (tones) through the pc speaker
+endef
+
+$(eval $(call KernelPackage,pcspkr))
define KernelPackage/pcmcia-core
SUBMENU:=$(OTHER_MENU)
DEPENDS:=@PCMCIA_SUPPORT
KCONFIG:= \
CONFIG_PCMCIA \
- CONFIG_CARDBUS
+ CONFIG_CARDBUS \
CONFIG_PCCARD \
- CONFIG_YENTA \
CONFIG_PCCARD_NONSTATIC \
PCMCIA_DEBUG=n
endef
# CONFIG_CARDBUS
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core yenta_socket ds)
+ $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,25,pcmcia_core ds)
endef
define KernelPackage/pcmcia-core/2.6
# KCONFIG:= \
# CONFIG_PCCARD \
# CONFIG_PCMCIA \
-# CONFIG_YENTA \
# CONFIG_PCCARD_NONSTATIC \
# PCMCIA_DEBUG=n
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic yenta_socket)
+ $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,25,pcmcia_core pcmcia)
endef
-define KernelPackage/pcmcia-core/au1000-2.6
+define KernelPackage/pcmcia-core/description
+ Kernel support for PCMCIA/CardBus controllers
+endef
+
+$(eval $(call KernelPackage,pcmcia-core))
+
+
+define KernelPackage/pcmcia-yenta
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=yenta socket driver
+ DEPENDS:=kmod-pcmcia-core
+ KCONFIG:=CONFIG_YENTA
FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic au1x00_ss)
+ $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,rsrc_nonstatic yenta_socket)
endef
-define KernelPackage/pcmcia-core/description
- Kernel support for PCMCIA/CardBus controllers
+$(eval $(call KernelPackage,pcmcia-yenta))
+
+define KernelPackage/pcmcia-au1000
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RMI/AMD Au1000 PCMCIA support
+ DEPENDS:=kmod-pcmcia-core @TARGET_au1000
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
endef
-$(eval $(call KernelPackage,pcmcia-core))
+$(eval $(call KernelPackage,pcmcia-au1000))
+
+define KernelPackage/pcmcia-bcm63xx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Broadcom BCM63xx PCMCIA support
+ DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
+ KCONFIG:=CONFIG_PCMCIA_BCM63XX
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+endef
+
+define KernelPackage/pcmcia-bcm63xx/description
+ Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+endef
+$(eval $(call KernelPackage,pcmcia-bcm63xx))
define KernelPackage/pcmcia-serial
SUBMENU:=$(OTHER_MENU)
DEPENDS:=kmod-pcmcia-core
KCONFIG:= \
CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
$(eval $(call KernelPackage,pcmcia-serial))
+define KernelPackage/ssb
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Silicon Sonics Backplane glue code
+ DEPENDS:=@LINUX_2_6 @PCI_SUPPORT @!TARGET_brcm47xx||!TARGET_brcm63xx
+ KCONFIG:=\
+ CONFIG_SSB \
+ CONFIG_SSB_B43_PCI_BRIDGE=y \
+ CONFIG_SSB_DRIVER_MIPS=n \
+ CONFIG_SSB_DRIVER_PCICORE=y \
+ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_PCIHOST=y \
+ CONFIG_SSB_PCIHOST_POSSIBLE=y \
+ CONFIG_SSB_POSSIBLE=y \
+ CONFIG_SSB_SPROM=y \
+ CONFIG_SSB_SILENT=y
+ FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,29,ssb)
+endef
+
+define KernelPackage/ssb/description
+ Silicon Sonics Backplane glue code.
+endef
+
+$(eval $(call KernelPackage,ssb))
+
-# XXX: remove @!TARGET_* later when we have USB support properly detected on all targets
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT @!TARGET_atheros @!TARGET_uml
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-input-core
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BLUEZ_BNEP \
CONFIG_BLUEZ_HCIUART \
CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BLUEZ_HIDP \
CONFIG_BT \
CONFIG_BT_L2CAP \
CONFIG_BT_SCO \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
+ CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIUSB \
- CONFIG_BT_HCIUART
+ CONFIG_BT_HCIUART \
+ CONFIG_BT_HIDP
endef
define KernelPackage/bluetooth/2.4
# CONFIG_BT_BNEP \
# CONFIG_BT_HCIUSB \
# CONFIG_BT_HCIUART
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.27)),1)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+else
+ FILES:= \
+ $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart hci_usb)
+endif
endef
define KernelPackage/bluetooth/description
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@TARGET_at91
+ DEPENDS:=@LINUX_2_6
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
- CONFIG_MMC_AT91
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
+ CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/mmc_block.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
endef
define KernelPackage/mmc/description
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mmc-at91
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD Card Support on AT91
+ DEPENDS:=@TARGET_at91 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_AT91
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
+# XXX: added a workaround for watchdog path changes
+ifeq ($(KERNEL),2.4)
+ WATCHDOG_DIR=char
+endif
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
+ WATCHDOG_DIR=watchdog
+endif
+WATCHDOG_DIR?=char/watchdog
+
+define KernelPackage/atmel-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AT32AP700x watchdog
+ DEPENDS:=@TARGET_avr32
+ KCONFIG:=CONFIG_AT32AP700X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
-define KernelPackage/softdog/2.4
- FILES:=$(LINUX_DIR)/drivers/char/softdog.o
+define KernelPackage/softdog/description
+ Software watchdog driver
endef
-define KernelPackage/softdog/2.6
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/softdog.ko
+$(eval $(call KernelPackage,softdog))
+
+
+define KernelPackage/leds-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO LED support
+ DEPENDS:= @GPIO_SUPPORT
+ KCONFIG:=CONFIG_LEDS_GPIO
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
endef
-define KernelPackage/softdog/description
- Software watchdog driver
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
endef
-$(eval $(call KernelPackage,softdog))
+$(eval $(call KernelPackage,leds-gpio))
+
+
+define KernelPackage/ledtrig-adm5120-switch
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED ADM5120 Switch Port Status Trigger
+ DEPENDS:=@TARGET_adm5120
+ KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
+endef
+
+define KernelPackage/ledtrig-adm5120-switch/description
+ Kernel module to allow LEDs to be controlled by the port states
+ of the ADM5120 built-in ethernet switch.
+endef
+
+$(eval $(call KernelPackage,ledtrig-adm5120-switch))
define KernelPackage/leds-net48xx
SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
KCONFIG:=CONFIG_LEDS_NET48XX
FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
define KernelPackage/leds-wrap
SUBMENU:=$(OTHER_MENU)
TITLE:=PCengines WRAP LED support
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
KCONFIG:=CONFIG_LEDS_WRAP
FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
$(eval $(call KernelPackage,leds-wrap))
+define KernelPackage/leds-alix
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines ALIX LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_ALIX
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
+
+
+define KernelPackage/ledtrig-netdev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED NETDEV Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+endef
+
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
+endef
+
+$(eval $(call KernelPackage,ledtrig-netdev))
+
+
+define KernelPackage/ledtrig-morse
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED Morse Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+endef
+
+define KernelPackage/ledtrig-morse/description
+ Kernel module to show morse coded messages on LEDs.
+endef
+
+$(eval $(call KernelPackage,ledtrig-morse))
+
+
+define KernelPackage/gpio-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
+endef
+
+$(eval $(call KernelPackage,gpio-dev))
+
+
define KernelPackage/nsc-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi GPIO support
define KernelPackage/scx200-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 GPIO support
- DEPENDS:=@TARGET_x86 kmod-nsc-gpio
+ DEPENDS:=@TARGET_x86 +kmod-nsc-gpio
KCONFIG:=CONFIG_SCx200_GPIO
FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 Watchdog support
DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_SCx200_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
$(eval $(call KernelPackage,scx200-wdt))
+define KernelPackage/sc520-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Natsemi SC520 Watchdog support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SC520_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
+endef
+
+define KernelPackage/sc520-wdt/description
+ Kernel module for SC520 Watchdog
+endef
+
+$(eval $(call KernelPackage,sc520-wdt))
+
+
define KernelPackage/input-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,input-core)
+ AUTOLOAD:=$(call AutoLoad,19,input-core)
endef
define KernelPackage/input-core/description
define KernelPackage/input-evdev
SUBMENU:=$(OTHER_MENU)
- TITLE:=Input even device
+ TITLE:=Input event device
DEPENDS:=+kmod-input-core
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
endef
$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=HID Devices
+ DEPENDS:=+kmod-input-core +kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-polldev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled Input device support
+ DEPENDS:=+kmod-input-core @LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-gpio-keys
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO key support
+ DEPENDS:= @GPIO_SUPPORT +kmod-input-core
+ KCONFIG:=CONFIG_KEYBOARD_GPIO
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+endef
+
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys))
+
+
+define KernelPackage/input-gpio-buttons
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+endef
+
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+define KernelPackage/input-joydev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Joystick device support
+ DEPENDS:=+kmod-input-core
+ KCONFIG:=CONFIG_INPUT_JOYDEV
+ FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,joydev)
+endef
+
+define KernelPackage/input-joydev/description
+ Kernel module for joystick support
+endef
+
+$(eval $(call KernelPackage,input-joydev))
+
+
+define KernelPackage/mmc-atmelmci
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Amtel MMC Support
+ DEPENDS:=@TARGET_avr32 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_ATMELMCI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+endef
+
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for Atmel Multimedia Card Interface.
+endef
+
+$(eval $(call KernelPackage,mmc-atmelmci))
+
+
+define KernelPackage/cs5535-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AMD CS5535/CS5536 GPIO driver
+ DEPENDS:=@TARGET_x86||@TARGET_olpc
+ KCONFIG:=CONFIG_CS5535_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,cs5535_gpio)
+endef
+
+define KernelPackage/cs5535-gpio/description
+ This package contains the AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,cs5535-gpio))
+
+
+define KernelPackage/textsearch
+SUBMENU:=$(OTHER_MENU)
+ TITLE:=Textsearch support is selected if needed
+ DEPENDS:=@LINUX_2_6 @!LINUX_2_6_21
+ KCONFIG:= \
+ CONFIG_TEXTSEARCH=y \
+ CONFIG_TEXTSEARCH_KMP \
+ CONFIG_TEXTSEARCH_BM \
+ CONFIG_TEXTSEARCH_FSM
+ FILES:= \
+ $(LINUX_DIR)/lib/ts_kmp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/lib/ts_bm.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/lib/ts_fsm.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+endef
+
+$(eval $(call KernelPackage,textsearch))
+
+
+define KernelPackage/rfkill
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RF switch subsystem support
+ DEPENDS:=@TARGET_x86||TARGET_olpc||TARGET_s3c24xx||TARGET_brcm47xx
+ KCONFIG:= \
+ CONFIG_RFKILL \
+ CONFIG_RFKILL_INPUT \
+ CONFIG_RFKILL_LEDS=y
+ FILES:= \
+ $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
+endef
+
+define KernelPackage/rfkill/description
+ Say Y here if you want to have control over RF switches
+ found on many WiFi and Bluetooth cards.
+endef
+
+$(eval $(call KernelPackage,rfkill))
projects / openwrt.git / blobdiff