-#
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
-
-USBMENU:=USB Support
-
-ifeq ($(KERNEL),2.4)
- USBNET_DIR:=usb/net
-endif
-ifeq ($(KERNEL_PATCHVER),2.6.21)
- USBNET_DIR:=usb/net
- USBHID_DIR:=usb/input
- USBINPUT_DIR:=usb/input
-endif
+USB_MENU:=USB Support
-USBNET_DIR?=net/usb
+USBNET_DIR:=net/usb
USBHID_DIR?=hid/usbhid
USBINPUT_DIR?=input/misc
-define usbdep
- SUBMENU:=$(USBMENU)
- DEPENDS:=kmod-usb-core $(1)
-endef
-
-
define KernelPackage/usb-core
- SUBMENU:=$(USBMENU)
+ SUBMENU:=$(USB_MENU)
TITLE:=Support for USB
DEPENDS:=@USB_SUPPORT
- KCONFIG:=CONFIG_USB
- AUTOLOAD:=$(call AutoLoad,20,usbcore)
+ KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.2)),1)
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/core/usbcore.ko \
+ $(LINUX_DIR)/drivers/usb/usb-common.ko
+ AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1)
+ else
+ FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.ko
+ AUTOLOAD:=$(call AutoLoad,20,usbcore,1)
+ endif
+ $(call AddDepends/nls)
endef
-define KernelPackage/usb-core/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/usbcore.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/usb-core/description
+ Kernel support for USB
endef
-define KernelPackage/usb-core/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,usb-core))
+
+
+define AddDepends/usb
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=+!TARGET_etrax:kmod-usb-core $(1)
endef
-define KernelPackage/usb-core/description
- Kernel support for USB
+
+define KernelPackage/usb-gadget
+ TITLE:=USB Gadget support
+ KCONFIG:=CONFIG_USB_GADGET
+ FILES:=
+ AUTOLOAD:=
+ DEPENDS:=@USB_GADGET_SUPPORT
+ $(call AddDepends/usb)
endef
-$(eval $(call KernelPackage,usb-core))
+define KernelPackage/usb-gadget/description
+ Kernel support for USB Gadget mode.
+endef
+
+$(eval $(call KernelPackage,usb-gadget))
+
+
+define KernelPackage/usb-eth-gadget
+ TITLE:=USB Ethernet Gadget support
+ KCONFIG:= \
+ CONFIG_USB_ETH \
+ CONFIG_USB_ETH_RNDIS=y \
+ CONFIG_USB_ETH_EEM=y
+ DEPENDS:=+kmod-usb-gadget
+ FILES:=$(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
+ AUTOLOAD:=$(call AutoLoad,52,g_ether)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-eth-gadget/description
+ Kernel support for USB Ethernet Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-eth-gadget))
define KernelPackage/usb-uhci
- $(call usbdep,)
TITLE:=Support for UHCI controllers
KCONFIG:= \
CONFIG_USB_UHCI_ALT \
CONFIG_USB_UHCI_HCD
+ FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,50,uhci-hcd,1)
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-uhci/2.4
-# KCONFIG:=CONFIG_USB_UHCI_ALT
- FILES:=$(LINUX_DIR)/drivers/usb/host/uhci.o
- AUTOLOAD:=$(call AutoLoad,50,uhci)
+define KernelPackage/usb-uhci/description
+ Kernel support for USB UHCI controllers
endef
-define KernelPackage/usb-uhci/2.6
-# KCONFIG:=CONFIG_USB_UHCI_HCD
- FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,50,uhci-hcd)
+$(eval $(call KernelPackage,usb-uhci,1))
+
+
+define KernelPackage/usb-ohci
+ TITLE:=Support for OHCI controllers
+ DEPENDS:=+TARGET_brcm47xx:kmod-usb-brcm47xx
+ KCONFIG:= \
+ CONFIG_USB_OHCI \
+ CONFIG_USB_OHCI_HCD \
+ CONFIG_USB_OHCI_AR71XX=y \
+ CONFIG_USB_OHCI_ATH79=y \
+ CONFIG_USB_OCTEON_OHCI=y
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1)
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-uhci/description
- Kernel support for USB UHCI controllers
+define KernelPackage/usb-ohci/description
+ Kernel support for USB OHCI controllers
endef
-$(eval $(call KernelPackage,usb-uhci))
+$(eval $(call KernelPackage,usb-ohci,1))
-define KernelPackage/usb-uhci-iv
- $(call usbdep,@LINUX_2_4)
- TITLE:=Support for Intel/VIA UHCI controllers
- KCONFIG:=CONFIG_USB_UHCI
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-uhci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,usb-uhci)
-endef
+define KernelPackage/musb-hdrc
+ TITLE:=Support for Mentor Graphics silicon dual role USB
+ KCONFIG:= \
+ CONFIG_USB_MUSB_HDRC \
+ CONFIG_MUSB_PIO_ONLY=n \
+ CONFIG_USB_MUSB_OTG=y \
+ CONFIG_USB_MUSB_DEBUG=y
+ DEPENDS:=@TARGET_omap24xx
+ FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
+ AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
+ $(call AddDepends/usb)
+endef
-define KernelPackage/usb-uhci-iv/description
- Kernel support for Intel/VIA USB UHCI controllers
+define KernelPackage/musb-hdrc/description
+ Kernel support for Mentor Graphics silicon dual role USB device.
endef
-$(eval $(call KernelPackage,usb-uhci-iv))
+$(eval $(call KernelPackage,musb-hdrc))
-define KernelPackage/usb-ohci
- $(call usbdep,)
- TITLE:=Support for OHCI controllers
+define KernelPackage/nop-usb-xceiv
+ TITLE:=Support for USB OTG NOP transceiver
KCONFIG:= \
- CONFIG_USB_OHCI \
- CONFIG_USB_OHCI_HCD
+ CONFIG_NOP_USB_XCEIV
+ DEPENDS:=@TARGET_omap24xx
+ FILES:=$(LINUX_DIR)/drivers/usb/otg/nop-usb-xceiv.ko
+ AUTOLOAD:=$(call AutoLoad,45,nop-usb-xceiv)
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-ohci/2.4
-# KCONFIG:=CONFIG_USB_OHCI
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-ohci.o
- AUTOLOAD:=$(call AutoLoad,50,usb-ohci)
+define KernelPackage/nop-usb-xceiv/description
+ Support for USB OTG NOP transceiver
endef
-define KernelPackage/usb-ohci/2.6
-# KCONFIG:=CONFIG_USB_OHCI_HCD
- FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,50,ohci-hcd)
+$(eval $(call KernelPackage,nop-usb-xceiv))
+
+
+define KernelPackage/tusb6010
+ TITLE:=Support for TUSB 6010
+ KCONFIG:= \
+ CONFIG_USB_MUSB_TUSB6010 \
+ CONFIG_USB_TUSB6010=y
+ DEPENDS:=+kmod-musb-hdrc +kmod-nop-usb-xceiv
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-ohci/description
- Kernel support for USB OHCI controllers
+define KernelPackage/tusb6010/description
+ TUSB6010 support
endef
-$(eval $(call KernelPackage,usb-ohci))
+$(eval $(call KernelPackage,tusb6010))
-define KernelPackage/usb-adm5120
- $(call usbdep,@TARGET_adm5120_router_be||@TARGET_adm5120_router_le)
- TITLE:=Support for the ADM5120 HCD controller
- KCONFIG:=CONFIG_USB_ADM5120_HCD
- FILES:=$(LINUX_DIR)/drivers/usb/host/adm5120-hcd.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,adm5120-hcd)
+define KernelPackage/usb-tahvo
+ TITLE:=Support for Tahvo (Nokia n810) USB
+ KCONFIG:= \
+ CONFIG_CBUS_TAHVO_USB \
+ CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT=n \
+ CONFIG_USB_OHCI_HCD_OMAP1=y \
+ CONFIG_USB_GADGET_DEBUG_FS=n
+ DEPENDS:=@TARGET_omap24xx +kmod-tusb6010 +kmod-usb-gadget
+ FILES:=$(LINUX_DIR)/drivers/cbus/tahvo-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,tahvo-usb)
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-adm5120/description
- Kernel support for the ADM5120 HCD USB controller
+define KernelPackage/usb-tahvo/description
+ Kernel support for Nokia n810 USB OHCI controller.
endef
-$(eval $(call KernelPackage,usb-adm5120))
+$(eval $(call KernelPackage,usb-tahvo))
+
+
+define KernelPackage/usb-isp116x-hcd
+ TITLE:=Support for the ISP116x USB Host Controller
+ DEPENDS:=@TARGET_ppc40x
+ KCONFIG:= \
+ CONFIG_USB_ISP116X_HCD \
+ CONFIG_USB_ISP116X_HCD_OF=y \
+ CONFIG_USB_ISP116X_HCD_PLATFORM=n
+ FILES:=$(LINUX_DIR)/drivers/usb/host/isp116x-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,50,isp116x-hcd)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-isp116x-hcd/description
+ Kernel support for the ISP116X USB Host Controller
+endef
+
+$(eval $(call KernelPackage,usb-isp116x-hcd))
define KernelPackage/usb2
- $(call usbdep,)
TITLE:=Support for USB2 controllers
- KCONFIG:=CONFIG_USB_EHCI_HCD
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ehci-hcd)
+ DEPENDS:=+TARGET_brcm47xx:kmod-usb-brcm47xx
+ KCONFIG:=CONFIG_USB_EHCI_HCD \
+ CONFIG_USB_EHCI_AR71XX=y \
+ CONFIG_USB_EHCI_ATH79=y \
+ CONFIG_USB_OCTEON_EHCI=y \
+ CONFIG_USB_EHCI_FSL=n
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,40,ehci-hcd,1)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb2/description
define KernelPackage/usb-acm
- $(call usbdep,)
TITLE:=Support for modems/isdn controllers
KCONFIG:=CONFIG_USB_ACM
-endef
-
-define KernelPackage/usb-acm/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/acm.o
- AUTOLOAD:=$(call AutoLoad,60,acm)
-endef
-
-define KernelPackage/usb-acm/2.6
FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
AUTOLOAD:=$(call AutoLoad,60,cdc-acm)
+$(call AddDepends/usb)
endef
define KernelPackage/usb-acm/description
define KernelPackage/usb-audio
- $(call usbdep,+kmod-soundcore)
- TITLE:=Support for audio devices
+ TITLE:=Support for USB audio devices
KCONFIG:= \
CONFIG_USB_AUDIO \
CONFIG_SND_USB_AUDIO
-endef
-
-define KernelPackage/usb-audio/2.4
-# KCONFIG:=CONFIG_USB_AUDIO
- FILES:=$(LINUX_DIR)/drivers/usb/audio.o
- AUTOLOAD:=$(call AutoLoad,60,audio)
-endef
-
-define KernelPackage/usb-audio/2.6
-# KCONFIG:=CONFIG_SND_USB_AUDIO
+ $(call AddDepends/usb)
+ $(call AddDepends/sound)
+# For Linux 2.6.35+
+ifneq ($(wildcard $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko),)
+ FILES:= \
+ $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
+ $(LINUX_DIR)/sound/usb/snd-usb-audio.ko
+ AUTOLOAD:=$(call AutoLoad,60,snd-usbmidi-lib snd-usb-audio)
+else
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usb-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
AUTOLOAD:=$(call AutoLoad,60,snd-usb-lib snd-usb-audio)
+endif
endef
define KernelPackage/usb-audio/description
define KernelPackage/usb-printer
- $(call usbdep,)
TITLE:=Support for printers
KCONFIG:=CONFIG_USB_PRINTER
-endef
-
-define KernelPackage/usb-printer/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/printer.o
- AUTOLOAD:=$(call AutoLoad,60,printer)
-endef
-
-define KernelPackage/usb-printer/2.6
FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
AUTOLOAD:=$(call AutoLoad,60,usblp)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-printer/description
define KernelPackage/usb-serial
- $(call usbdep,)
TITLE:=Support for USB-to-Serial converters
KCONFIG:=CONFIG_USB_SERIAL
- FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.ko
AUTOLOAD:=$(call AutoLoad,60,usbserial)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-serial/description
$(eval $(call KernelPackage,usb-serial))
+define AddDepends/usb-serial
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-serial $(1)
+endef
+
+
define KernelPackage/usb-serial-airprime
- $(call usbdep,kmod-usb-serial @LINUX_2_6)
- TITLE:=Support for Airprime (EVDO)
+ TITLE:=Support for Airprime (EVDO)
KCONFIG:=CONFIG_USB_SERIAL_AIRPRIME
- FILES:=$(LINUX_DIR)/drivers/usb/serial/airprime.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/airprime.ko
AUTOLOAD:=$(call AutoLoad,65,airprime)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-airprime/description
- Kernel support for Airprime (EVDO)
+ Kernel support for Airprime (EVDO)
endef
$(eval $(call KernelPackage,usb-serial-airprime))
define KernelPackage/usb-serial-belkin
- $(call usbdep,kmod-usb-serial)
TITLE:=Support for Belkin devices
KCONFIG:=CONFIG_USB_SERIAL_BELKIN
- FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.ko
AUTOLOAD:=$(call AutoLoad,65,belkin_sa)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-belkin/description
$(eval $(call KernelPackage,usb-serial-belkin))
+define KernelPackage/usb-serial-ch341
+ TITLE:=Support for CH341 devices
+ KCONFIG:=CONFIG_USB_SERIAL_CH341
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ch341.ko
+ AUTOLOAD:=$(call AutoLoad,65,ch341)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ch341/description
+ Kernel support for Winchiphead CH341 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ch341))
+
+
define KernelPackage/usb-serial-ftdi
- $(call usbdep,kmod-usb-serial)
TITLE:=Support for FTDI devices
KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
- FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.ko
AUTOLOAD:=$(call AutoLoad,65,ftdi_sio)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-ftdi/description
$(eval $(call KernelPackage,usb-serial-ftdi))
+define KernelPackage/usb-serial-ti-usb
+ TITLE:=Support for TI USB 3410/5052
+ KCONFIG:=CONFIG_USB_SERIAL_TI
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ti_usb_3410_5052.ko
+ AUTOLOAD:=$(call AutoLoad,65,ti_usb_3410_5052)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ti-usb/description
+ Kernel support for TI USB 3410/5052 devices
+endef
+
+$(eval $(call KernelPackage,usb-serial-ti-usb))
+
+
+define KernelPackage/usb-serial-ipw
+ TITLE:=Support for IPWireless 3G devices
+ KCONFIG:=CONFIG_USB_SERIAL_IPW
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ipw.ko
+ AUTOLOAD:=$(call AutoLoad,65,ipw)
+ $(call AddDepends/usb-serial)
+endef
+
+$(eval $(call KernelPackage,usb-serial-ipw))
+
+
define KernelPackage/usb-serial-mct
- $(call usbdep,kmod-usb-serial)
TITLE:=Support for Magic Control Tech. devices
KCONFIG:=CONFIG_USB_SERIAL_MCT_U232
- FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.ko
AUTOLOAD:=$(call AutoLoad,65,mct_u232)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-mct/description
$(eval $(call KernelPackage,usb-serial-mct))
+define KernelPackage/usb-serial-mos7720
+ TITLE:=Support for Moschip MOS7720 devices
+ KCONFIG:=CONFIG_USB_SERIAL_MOS7720
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7720.ko
+ AUTOLOAD:=$(call AutoLoad,65,mos7720)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mos7720/description
+ Kernel support for Moschip MOS7720 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mos7720))
+
+
define KernelPackage/usb-serial-pl2303
- $(call usbdep,kmod-usb-serial)
TITLE:=Support for Prolific PL2303 devices
KCONFIG:=CONFIG_USB_SERIAL_PL2303
- FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.ko
AUTOLOAD:=$(call AutoLoad,65,pl2303)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-pl2303/description
$(eval $(call KernelPackage,usb-serial-pl2303))
+define KernelPackage/usb-serial-cp210x
+ TITLE:=Support for Silicon Labs cp210x devices
+ KCONFIG:=CONFIG_USB_SERIAL_CP210X
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/cp210x.ko
+ AUTOLOAD:=$(call AutoLoad,65,cp210x)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-cp210x/description
+ Kernel support for Silicon Labs cp210x USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-cp210x))
+
+
+define KernelPackage/usb-serial-ark3116
+ TITLE:=Support for ArkMicroChips ARK3116 devices
+ KCONFIG:=CONFIG_USB_SERIAL_ARK3116
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ark3116.ko
+ AUTOLOAD:=$(call AutoLoad,65,ark3116)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ark3116/description
+ Kernel support for ArkMicroChips ARK3116 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ark3116))
+
+
+define KernelPackage/usb-serial-oti6858
+ TITLE:=Support for Ours Technology OTI6858 devices
+ KCONFIG:=CONFIG_USB_SERIAL_OTI6858
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/oti6858.ko
+ AUTOLOAD:=$(call AutoLoad,65,oti6858)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-oti6858/description
+ Kernel support for Ours Technology OTI6858 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-oti6858))
+
+
define KernelPackage/usb-serial-sierrawireless
- $(call usbdep,kmod-usb-serial @LINUX_2_6)
TITLE:=Support for Sierra Wireless devices
KCONFIG:=CONFIG_USB_SERIAL_SIERRAWIRELESS
- FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.ko
AUTOLOAD:=$(call AutoLoad,65,sierra)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-sierrawireless/description
$(eval $(call KernelPackage,usb-serial-sierrawireless))
+define KernelPackage/usb-serial-motorola-phone
+ TITLE:=Support for Motorola usb phone
+ KCONFIG:=CONFIG_USB_SERIAL_MOTOROLA
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/moto_modem.ko
+ AUTOLOAD:=$(call AutoLoad,65,moto_modem)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-motorola-phone/description
+ Kernel support for Motorola usb phone
+endef
+
+$(eval $(call KernelPackage,usb-serial-motorola-phone))
+
+
define KernelPackage/usb-serial-visor
- $(call usbdep,kmod-usb-serial)
TITLE:=Support for Handspring Visor devices
KCONFIG:=CONFIG_USB_SERIAL_VISOR
- FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.ko
AUTOLOAD:=$(call AutoLoad,65,visor)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-visor/description
$(eval $(call KernelPackage,usb-serial-visor))
+define KernelPackage/usb-serial-cypress-m8
+ TITLE:=Support for CypressM8 USB-Serial
+ KCONFIG:=CONFIG_USB_SERIAL_CYPRESS_M8
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/cypress_m8.ko
+ AUTOLOAD:=$(call AutoLoad,65,cypress_m8)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-cypress-m8/description
+ Kernel support for devices with Cypress M8 USB to Serial chip
+ (for example, the Delorme Earthmate LT-20 GPS)
+ Supported microcontrollers in the CY4601 family are:
+ CY7C63741 CY7C63742 CY7C63743 CY7C64013
+endef
+
+$(eval $(call KernelPackage,usb-serial-cypress-m8))
+
+
define KernelPackage/usb-serial-keyspan
- $(call usbdep,kmod-usb-serial)
TITLE:=Support for Keyspan USB-to-Serial devices
KCONFIG:= \
CONFIG_USB_SERIAL_KEYSPAN \
CONFIG_USB_SERIAL_KEYSPAN_MPR \
CONFIG_USB_SERIAL_KEYSPAN_USA49W \
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
- FILES:=$(LINUX_DIR)/drivers/usb/serial/keyspan.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/keyspan.ko
AUTOLOAD:=$(call AutoLoad,65,keyspan)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-keyspan/description
$(eval $(call KernelPackage,usb-serial-keyspan))
+define KernelPackage/usb-serial-wwan
+ TITLE:=Support for GSM and CDMA modems
+ DEPENDS:= @!LINUX_2_6_30&&!LINUX_2_6_31&&!LINUX_2_6_32
+ KCONFIG:=CONFIG_USB_SERIAL_WWAN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usb_wwan.ko
+ AUTOLOAD:=$(call AutoLoad,61,usb_wwan)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-wwan/description
+ Kernel support for USB GSM and CDMA modems
+endef
+
+$(eval $(call KernelPackage,usb-serial-wwan))
+
+
define KernelPackage/usb-serial-option
- $(call usbdep,kmod-usb-serial @LINUX_2_6)
TITLE:=Support for Option HSDPA modems
+ DEPENDS:=+!LINUX_2_6_30&&!LINUX_2_6_31&&!LINUX_2_6_32:kmod-usb-serial-wwan
KCONFIG:=CONFIG_USB_SERIAL_OPTION
- FILES:=$(LINUX_DIR)/drivers/usb/serial/option.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/option.ko
AUTOLOAD:=$(call AutoLoad,65,option)
+ $(call AddDepends/usb-serial)
endef
define KernelPackage/usb-serial-option/description
define KernelPackage/usb-storage
- $(call usbdep,+kmod-scsi-core)
TITLE:=USB Storage support
+ DEPENDS:= +kmod-scsi-core
KCONFIG:=CONFIG_USB_STORAGE
- FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,scsi_mod sd_mod usb-storage)
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.ko
+ AUTOLOAD:=$(call AutoLoad,60,usb-storage,1)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-storage/description
$(eval $(call KernelPackage,usb-storage))
+define KernelPackage/usb-storage-extras
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Extra drivers for usb-storage
+ DEPENDS:=+kmod-usb-storage
+ KCONFIG:= \
+ CONFIG_USB_STORAGE_ALAUDA \
+ CONFIG_USB_STORAGE_CYPRESS_ATACB \
+ CONFIG_USB_STORAGE_DATAFAB \
+ CONFIG_USB_STORAGE_FREECOM \
+ CONFIG_USB_STORAGE_ISD200 \
+ CONFIG_USB_STORAGE_JUMPSHOT \
+ CONFIG_USB_STORAGE_KARMA \
+ CONFIG_USB_STORAGE_SDDR09 \
+ CONFIG_USB_STORAGE_SDDR55 \
+ CONFIG_USB_STORAGE_USBAT
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/storage/ums-alauda.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-cypress.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-datafab.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-freecom.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-isd200.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-jumpshot.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-karma.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-sddr09.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-sddr55.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-usbat.ko
+ AUTOLOAD:=$(call AutoLoad,60,ums-alauda ums-cypress ums-datafab \
+ ums-freecom ums-isd200 ums-jumpshot \
+ ums-karma ums-sddr09 ums-sddr55 ums-usbat)
+endef
+
+define KernelPackage/usb-storage-extras/description
+ Say Y here if you want to have some more drivers,
+ such as for SmartMedia card readers.
+endef
+
+$(eval $(call KernelPackage,usb-storage-extras))
+
+
+define KernelPackage/usb-video
+ TITLE:=Support for USB video devices
+ KCONFIG:=CONFIG_VIDEO_USBVIDEO
+ FILES:=$(LINUX_DIR)/drivers/media/video/usbvideo/usbvideo.ko
+ AUTOLOAD:=$(call AutoLoad,61,usbvideo)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-video/description
+ Kernel support for USB video devices
+endef
+
+$(eval $(call KernelPackage,usb-video))
+
+
define KernelPackage/usb-atm
- $(call usbdep,@LINUX_2_6 kmod-atm)
TITLE:=Support for ATM on USB bus
+ DEPENDS:=+kmod-atm
KCONFIG:=CONFIG_USB_ATM
- FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.ko
AUTOLOAD:=$(call AutoLoad,60,usbatm)
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-atm/description
$(eval $(call KernelPackage,usb-atm))
-define KernelPackage/usb-speedtouch
- $(call usbdep,@LINUX_2_6 kmod-atm)
- TITLE:=Support for SpeedTouch ADSL modems
+define AddDepends/usb-atm
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-atm $(1)
+endef
+
+
+define KernelPackage/usb-atm-speedtouch
+ TITLE:=SpeedTouch USB ADSL modems support
KCONFIG:=CONFIG_USB_SPEEDTOUCH
- FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.ko
AUTOLOAD:=$(call AutoLoad,70,speedtch)
+ $(call AddDepends/usb-atm)
endef
-define KernelPackage/usb-speedtouch/description
+define KernelPackage/usb-atm-speedtouch/description
Kernel support for SpeedTouch USB ADSL modems
endef
-$(eval $(call KernelPackage,usb-speedtouch))
+$(eval $(call KernelPackage,usb-atm-speedtouch))
-define KernelPackage/ueagle-atm
- $(call usbdep,@LINUX_2_6 kmod-atm)
- TITLE:=Driver for Eagle 8051 based USB ADSL modems
- FILES:=$(LINUX_DIR)/drivers/usb/atm/ueagle-atm.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/usb-atm-ueagle
+ TITLE:=Eagle 8051 based USB ADSL modems support
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/ueagle-atm.ko
KCONFIG:=CONFIG_USB_UEAGLEATM
AUTOLOAD:=$(call AutoLoad,70,ueagle-atm)
+ $(call AddDepends/usb-atm)
endef
-define KernelPackage/ueagle-atm/description
+define KernelPackage/usb-atm-ueagle/description
Kernel support for Eagle 8051 based USB ADSL modems
endef
-$(eval $(call KernelPackage,ueagle-atm))
+$(eval $(call KernelPackage,usb-atm-ueagle))
-define KernelPackage/usb-pwc
- $(call usbdep,+kmod-videodev @LINUX_2_6)
- TITLE:=Philips WebCam driver
- KCONFIG:=CONFIG_USB_PWC CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_PWC_DEBUG=n
- FILES:=$(LINUX_DIR)/drivers/media/video/pwc/pwc.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,70,pwc)
+define KernelPackage/usb-atm-cxacru
+ TITLE:=cxacru
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/cxacru.ko
+ KCONFIG:=CONFIG_USB_CXACRU
+ AUTOLOAD:=$(call AutoLoad,70,cxacru)
+ $(call AddDepends/usb-atm)
endef
-
-define KernelPackage/usb-pwc/description
- Kernel modules for supporting Philips WebCam USB devices
+define KernelPackage/usb-atm-cxacru/description
+ Kernel support for cxacru based USB ADSL modems
endef
-$(eval $(call KernelPackage,usb-pwc))
-
-
-define KernelPackage/cpia2
- $(call usbdep,+kmod-videodev @LINUX_2_6)
- TITLE:=CPIA2 video driver
- KCONFIG:=CONFIG_VIDEO_CPIA2
- FILES:=$(LINUX_DIR)/drivers/media/video/cpia2/cpia2.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,70,cpia2)
-endef
-
-define KernelPackage/cpia2/description
- Kernel modules for CPIA2 WebCam devices
-endef
-
-$(eval $(call KernelPackage,cpia2))
+$(eval $(call KernelPackage,usb-atm-cxacru))
define KernelPackage/usb-net
- $(call usbdep,)
TITLE:=Kernel modules for USB-to-Ethernet convertors
- KCONFIG:=CONFIG_USB_USBNET
- AUTOLOAD:=$(call Autoload,60, usbnet)
-endef
-
-define KernelPackage/usb-net/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/usbnet.$(LINUX_KMOD_SUFFIX)
-endef
-
-define KernelPackage/usb-net/2.6
- FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_USBNET CONFIG_MII=y
+ AUTOLOAD:=$(call AutoLoad,60,usbnet)
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
+ $(call AddDepends/usb)
endef
define KernelPackage/usb-net/description
$(eval $(call KernelPackage,usb-net))
+define AddDepends/usb-net
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-net $(1)
+endef
+
+
define KernelPackage/usb-net-asix
- $(call usbdep,kmod-usb-net @LINUX_2_6)
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
KCONFIG:=CONFIG_USB_NET_AX8817X
- FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call Autoload,61,asix)
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko
+ AUTOLOAD:=$(call AutoLoad,61,asix)
+ $(call AddDepends/usb-net)
endef
define KernelPackage/usb-net-asix/description
$(eval $(call KernelPackage,usb-net-asix))
+define KernelPackage/usb-net-hso
+ TITLE:=Kernel module for Option USB High Speed Mobile Devices
+ KCONFIG:=CONFIG_USB_HSO
+ FILES:= \
+ $(LINUX_DIR)/drivers/$(USBNET_DIR)/hso.ko
+ AUTOLOAD:=$(call AutoLoad,61,hso)
+ $(call AddDepends/usb-net)
+ $(call AddDepends/rfkill)
+endef
+
+define KernelPackage/usb-net-hso/description
+ Kernel module for Option USB High Speed Mobile Devices
+endef
+
+$(eval $(call KernelPackage,usb-net-hso))
+
+
define KernelPackage/usb-net-kaweth
- $(call usbdep,kmod-usb-net @LINUX_2_6)
TITLE:=Kernel module for USB-to-Ethernet Kaweth convertors
KCONFIG:=CONFIG_USB_KAWETH
- FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/kaweth.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call Autoload,61,kaweth)
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/kaweth.ko
+ AUTOLOAD:=$(call AutoLoad,61,kaweth)
+ $(call AddDepends/usb-net)
endef
define KernelPackage/usb-net-kaweth/description
define KernelPackage/usb-net-pegasus
- $(call usbdep,kmod-usb-net @LINUX_2_6)
TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors
KCONFIG:=CONFIG_USB_PEGASUS
- FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/pegasus.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call Autoload,61,pegasus)
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/pegasus.ko
+ AUTOLOAD:=$(call AutoLoad,61,pegasus)
+ $(call AddDepends/usb-net)
endef
define KernelPackage/usb-net-pegasus/description
$(eval $(call KernelPackage,usb-net-pegasus))
+define KernelPackage/usb-net-mcs7830
+ TITLE:=Kernel module for USB-to-Ethernet MCS7830 convertors
+ KCONFIG:=CONFIG_USB_NET_MCS7830
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/mcs7830.ko
+ AUTOLOAD:=$(call AutoLoad,61,mcs7830)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-mcs7830/description
+ Kernel module for USB-to-Ethernet MCS7830 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-mcs7830))
+
+
+define KernelPackage/usb-net-dm9601-ether
+ TITLE:=Support for DM9601 ethernet connections
+ KCONFIG:=CONFIG_USB_NET_DM9601
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/dm9601.ko
+ AUTOLOAD:=$(call AutoLoad,61,dm9601)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-dm9601-ether/description
+ Kernel support for USB DM9601 devices
+endef
+
+$(eval $(call KernelPackage,usb-net-dm9601-ether))
+
+define KernelPackage/usb-net-cdc-ether
+ TITLE:=Support for cdc ethernet connections
+ KCONFIG:=CONFIG_USB_NET_CDCETHER
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ether.ko
+ AUTOLOAD:=$(call AutoLoad,61,cdc_ether)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-ether/description
+ Kernel support for USB CDC Ethernet devices
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-ether))
+
+
+define KernelPackage/usb-net-rndis
+ TITLE:=Support for RNDIS connections
+ KCONFIG:=CONFIG_USB_NET_RNDIS_HOST
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/rndis_host.ko
+ AUTOLOAD:=$(call AutoLoad,62,rndis_host)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ether)
+endef
+
+define KernelPackage/usb-net-rndis/description
+ Kernel support for RNDIS connections
+endef
+
+$(eval $(call KernelPackage,usb-net-rndis))
+
+define KernelPackage/usb-net-sierrawireless
+ TITLE:=Support for Sierra Wireless devices
+ KCONFIG:=CONFIG_USB_SIERRA_NET
+ FILES:=$(LINUX_DIR)/drivers/net/usb/sierra_net.ko
+ AUTOLOAD:=$(call AutoLoad,65,sierra_net)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-sierrawireless/description
+ Kernel support for Sierra Wireless devices
+endef
+
+$(eval $(call KernelPackage,usb-net-sierrawireless))
+
+
define KernelPackage/usb-hid
- $(call usbdep,@LINUX_2_6 +kmod-input-core +kmod-input-evdev)
TITLE:=Support for USB Human Input Devices
- KCONFIG:=CONFIG_USB_HID
+ KCONFIG:=CONFIG_HID_SUPPORT=y CONFIG_USB_HID CONFIG_USB_HIDDEV=y
FILES:=$(LINUX_DIR)/drivers/$(USBHID_DIR)/usbhid.ko
AUTOLOAD:=$(call AutoLoad,70,usbhid)
+ $(call AddDepends/usb)
+ $(call AddDepends/hid)
+ $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/usb-yealink
- $(call usbdep,@LINUX_2_6 +kmod-input-core +kmod-input-evdev)
TITLE:=USB Yealink VOIP phone
KCONFIG:=CONFIG_USB_YEALINK CONFIG_INPUT_YEALINK CONFIG_INPUT=m CONFIG_INPUT_MISC=y
FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko
AUTOLOAD:=$(call AutoLoad,70,yealink)
+ $(call AddDepends/usb)
+ $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/usb-yealink/description
endef
$(eval $(call KernelPackage,usb-yealink))
+
+
+define KernelPackage/usb-cm109
+ TITLE:=Support for CM109 device
+ KCONFIG:=CONFIG_USB_CM109 CONFIG_INPUT_CM109 CONFIG_INPUT=m CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/cm109.ko
+ AUTOLOAD:=$(call AutoLoad,70,cm109)
+ $(call AddDepends/usb)
+ $(call AddDepends/input,+kmod-input-evdev)
+endef
+
+define KernelPackage/usb-cm109/description
+ Kernel support for CM109 VOIP phone
+endef
+
+$(eval $(call KernelPackage,usb-cm109))
+
+
+define KernelPackage/usb-test
+ TITLE:=USB Testing Driver
+ DEPENDS:=@DEVEL
+ KCONFIG:=CONFIG_USB_TEST
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/usbtest.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-test/description
+ Kernel support for testing USB Host Controller software.
+endef
+
+$(eval $(call KernelPackage,usb-test))
+
+
+define KernelPackage/usb-phidget
+ TITLE:=USB Phidget Driver
+ KCONFIG:=CONFIG_USB_PHIDGET CONFIG_USB_PHIDGETKIT CONFIG_USB_PHIDGETMOTORCONTROL CONFIG_USB_PHIDGETSERVO
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/phidget*.ko
+$(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phidget/description
+ Kernel support for USB Phidget devices.
+endef
+
+$(eval $(call KernelPackage,usb-phidget))
+
+define KernelPackage/usb-rt305x-dwc_otg
+ TITLE:=RT305X USB controller driver
+ DEPENDS:=@TARGET_ramips_rt305x
+ KCONFIG:= \
+ CONFIG_DWC_OTG \
+ CONFIG_DWC_OTG_HOST_ONLY=y \
+ CONFIG_DWC_OTG_DEVICE_ONLY=n \
+ CONFIG_DWC_OTG_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/usb/dwc_otg/dwc_otg.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc_otg,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-rt305x-dwc_otg/description
+ This driver provides USB Device Controller support for the
+ Synopsys DesignWare USB OTG Core used in the Ralink RT305X SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-rt305x-dwc_otg))
+
+define KernelPackage/usb-brcm47xx
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Support for USB on bcm47xx
+ DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+ KCONFIG:= \
+ CONFIG_USB_HCD_BCMA \
+ CONFIG_USB_HCD_SSB
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/bcma-hcd.ko \
+ $(LINUX_DIR)/drivers/usb/host/ssb-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,19,bcma-hcd ssb-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+$(eval $(call KernelPackage,usb-brcm47xx))
+
projects / openwrt.git / blobdiff