[adm5120] remove 2.6.25 specific stuff
[openwrt.git] / target / linux / adm5120 / files / drivers / usb / host / adm5120-hub.c
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c
deleted file mode 100644 (file)
index d1e7d43..0000000
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- * This file is licenced under GPL
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OHCI Root Hub ... the nonsharable stuff
- */
-
-#define dbg_port(hc,label,num,value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (value & ADMHC_PS_PPS) ? " PPS" : "", \
-               (value & ADMHC_PS_PRS) ? " PRS" : "", \
-               (value & ADMHC_PS_POCI) ? " POCI" : "", \
-               (value & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (value & ADMHC_PS_PES) ? " PES" : "", \
-               (value & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-#define dbg_port_write(hc,label,num,value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_CPP) ? " CPP" : "", \
-               (value & ADMHC_PS_SPP) ? " SPP" : "", \
-               (value & ADMHC_PS_SPR) ? " SPR" : "", \
-               (value & ADMHC_PS_CPS) ? " CPS" : "", \
-               (value & ADMHC_PS_SPS) ? " SPS" : "", \
-               \
-               (value & ADMHC_PS_SPE) ? " SPE" : "", \
-               (value & ADMHC_PS_CPE) ? " CPE" : "" \
-               );
-
-/*-------------------------------------------------------------------------*/
-
-/* hcd->hub_irq_enable() */
-static void admhc_hub_irq_enable(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-
-       spin_lock_irq(&ahcd->lock);
-       if (!ahcd->autostop)
-               del_timer(&hcd->rh_timer);      /* Prevent next poll */
-       admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
-       spin_unlock_irq(&ahcd->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* build "status change" packet (one or two bytes) from HC registers */
-
-static int
-admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             i, changed = 0, length = 1;
-       int             any_connected = 0;
-       unsigned long   flags;
-       u32             status;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
-               goto done;
-
-       /* init status */
-       status = admhc_read_rhdesc(ahcd);
-       if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
-               buf [0] = changed = 1;
-       else
-               buf [0] = 0;
-       if (ahcd->num_ports > 7) {
-               buf [1] = 0;
-               length++;
-       }
-
-       /* look at each port */
-       for (i = 0; i < ahcd->num_ports; i++) {
-               status = admhc_read_portstatus(ahcd, i);
-
-               /* can't autostop if ports are connected */
-               any_connected |= (status & ADMHC_PS_CCS);
-
-               if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
-                               | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
-                       changed = 1;
-                       if (i < 7)
-                           buf [0] |= 1 << (i + 1);
-                       else
-                           buf [1] |= 1 << (i - 7);
-               }
-       }
-
-       hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed,
-                       any_connected);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return changed ? length : 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
-       u32 rh = admhc_read_rhdesc(ahcd);
-       u16 temp;
-
-       desc->bDescriptorType = USB_DT_HUB;     /* Hub-descriptor */
-       desc->bPwrOn2PwrGood = ADMHC_POTPGT/2;  /* use default value */
-       desc->bHubContrCurrent = 0x00;          /* 0mA */
-
-       desc->bNbrPorts = ahcd->num_ports;
-       temp = 1 + (ahcd->num_ports / 8);
-       desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
-
-       /* FIXME */
-       temp = 0;
-       if (rh & ADMHC_RH_NPS)          /* no power switching? */
-           temp |= 0x0002;
-       if (rh & ADMHC_RH_PSM)          /* per-port power switching? */
-           temp |= 0x0001;
-       if (rh & ADMHC_RH_NOCP)         /* no overcurrent reporting? */
-           temp |= 0x0010;
-       else if (rh & ADMHC_RH_OCPM)    /* per-port overcurrent reporting? */
-           temp |= 0x0008;
-       desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
-
-       /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-       desc->bitmap[0] = 0;
-       desc->bitmap[0] = ~0;
-
-       return 0;
-}
-
-static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_status *hs = (struct usb_hub_status *)buf;
-       u32 t = admhc_read_rhdesc(ahcd);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
-       status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
-
-       change = 0;
-       change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
-       change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
-
-       hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
-{
-       struct usb_port_status *ps = (struct usb_port_status *)buf;
-       u32 t = admhc_read_portstatus(ahcd, port);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
-       status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
-       status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
-       status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
-       status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
-       status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
-       status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
-
-       change = 0;
-       change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
-       change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
-       change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
-       change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
-       change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
-
-       ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_OTG
-
-static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       u32                     status;
-
-       if (!port)
-               return -EINVAL;
-       port--;
-
-       /* start port reset before HNP protocol times out */
-       status = admhc_read_portstatus(ahcd, port);
-       if (!(status & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       /* khubd will finish the reset later */
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
-       return 0;
-}
-
-static void start_hnp(struct admhcd *ahcd);
-
-#else
-
-#define        admhc_start_port_reset          NULL
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-
-/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
- * not necessarily continuous ... to guard against resume signaling.
- * The short timeout is safe for non-root hubs, and is backward-compatible
- * with earlier Linux hosts.
- */
-#ifdef CONFIG_USB_SUSPEND
-#define        PORT_RESET_MSEC         50
-#else
-#define        PORT_RESET_MSEC         10
-#endif
-
-/* this timer value might be vendor-specific ... */
-#define        PORT_RESET_HW_MSEC      10
-
-/* wrap-aware logic morphed from <linux/jiffies.h> */
-#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
-
-/* called from some task, normally khubd */
-static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "reset port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
-       mdelay(10);
-       admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
-       mdelay(100);
-
-       return 0;
-}
-
-static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "enable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
-
-       return 0;
-}
-
-static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "disable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
-
-       return 0;
-}
-
-static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
-               u32 val)
-{
-#ifdef ADMHC_VERBOSE_DEBUG
-       dbg_port_write(ahcd, "write", port, val);
-#endif
-       admhc_write_portstatus(ahcd, port, val);
-
-       return 0;
-}
-
-static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
-               u16 wIndex, char *buf, u16 wLength)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             ports = hcd_to_bus(hcd)->root_hub->maxchild;
-       int             ret = 0;
-
-       if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
-               return -ESHUTDOWN;
-
-       switch (typeReq) {
-       case ClearHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-#if 0                  /* FIXME */
-                       admhc_writel(ahcd, ADMHC_RH_OCIC,
-                                       &ahcd->regs->roothub.status);
-#endif
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case ClearPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_disable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
-                       break;
-               case USB_PORT_FEAT_C_CONNECTION:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
-                       break;
-               case USB_PORT_FEAT_C_ENABLE:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
-                       break;
-               case USB_PORT_FEAT_C_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
-                       break;
-               case USB_PORT_FEAT_C_OVER_CURRENT:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
-                       break;
-               case USB_PORT_FEAT_C_RESET:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case GetHubDescriptor:
-               ret = admhc_get_hub_descriptor(ahcd, buf);
-               break;
-       case GetHubStatus:
-               ret = admhc_get_hub_status(ahcd, buf);
-               break;
-       case GetPortStatus:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               ret = admhc_get_port_status(ahcd, wIndex, buf);
-               break;
-       case SetHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-                       /* FIXME:  this can be cleared, yes? */
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case SetPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_enable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_RESET:
-                       ret = admhc_port_reset(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-#ifdef CONFIG_USB_OTG
-                       if (hcd->self.otg_port == (wIndex + 1)
-                                       && hcd->self.b_hnp_enable)
-                               start_hnp(ahcd);
-                       else
-#endif
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-
-       default:
-error:
-               /* "protocol stall" on error */
-               ret = -EPIPE;
-       }
-
-       return ret;
-}
-
This page took 0.027685 seconds and 4 git commands to generate.