[brcm63xx] board definitions: Added patch for calculating led count, which was part...

[openwrt.git] / target / linux / x86 / image / Makefile

diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/image/Makefile
index b159856..57d7b0b 100644 (file)
--- a/target/linux/x86/image/Makefile
+++ b/target/linux/x86/image/Makefile
@@ -29,15 +29,14 @@ ifneq ($(GRUB_TERMINALS),)
   GRUB_TERMINAL_CONFIG := terminal --timeout=2 $(GRUB_TERMINALS)
 endif
 
+ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
 
 ifneq ($(CONFIG_X86_GRUB_IMAGES),)
- ifneq ($(HOST_OS),Darwin)
 
   BOOTOPTS:=$(call qstrip,$(CONFIG_X86_GRUB_BOOTOPTS))
-  ROOTPART:=$(call qstrip,$(CONFIG_X86_GRUB_ROOTPART))
 
-  define Image/cmdline/ext2
-    root=$(ROOTPART) rootfstype=ext2 rootwait
+  define Image/cmdline/ext4
+    root=$(ROOTPART) rootfstype=ext4 rootwait
   endef
   
   define Image/cmdline/jffs2-64k
@@ -56,7 +55,9 @@ ifneq ($(CONFIG_X86_GRUB_IMAGES),)
        # left here because the image builder doesnt need these
        $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
        $(CP) \
-               $(KDIR)/*stage* \
+               $(KDIR)/stage1 \
+               $(KDIR)/stage2 \
+               $(KDIR)/e2fs_stage1_5 \
                $(KDIR)/root.grub/boot/grub/
        $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
        sed \
@@ -64,42 +65,31 @@ ifneq ($(CONFIG_X86_GRUB_IMAGES),)
                -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
                -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
                ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
-       PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh \
-               $(BIN_DIR)/$(IMG_PREFIX)-$(1).image \
-               $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub \
-               $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+       PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh \
+               $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+               $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
+               $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
        $(call Image/Build/grub/$(1))
   endef
 
   define Image/Prepare/grub
        # for the image builder
        $(CP) \
-               $(STAGING_DIR_HOST)/usr/lib/grub/i386-*/stage1 \
-               $(STAGING_DIR_HOST)/usr/lib/grub/i386-*/stage2 \
-               $(STAGING_DIR_HOST)/usr/lib/grub/i386-*/e2fs_stage1_5 \
+               $(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage1 \
+               $(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage2 \
+               $(STAGING_DIR)/usr/lib/grub/i386-openwrt/stage2_eltorito \
+               $(STAGING_DIR)/usr/lib/grub/i386-openwrt/e2fs_stage1_5 \
                $(KDIR)/
   endef
 
- else
-
-  define Image/Build/grub
-       PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" NOGRUB=1 ./gen_image_x86.sh 
-               $(BIN_DIR)/$(IMG_PREFIX)-$(1).image \
-               $(CONFIG_X86_GRUB_KERNELPART) "" \
-               $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
-  endef
-
- endif
 endif
 
 ROOTDELAY=10
 
 ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
 
-  ROOTPART:=$(call qstrip,$(CONFIG_OLPC_BOOTSCRIPT_ROOTPART))
-
-  define Image/cmdline/ext2
-    root=$(ROOTPART) rootfstype=ext2 rootwait
+  define Image/cmdline/ext4
+    root=$(ROOTPART) rootfstype=ext4 rootwait
   endef
 
   define Image/cmdline/jffs2-64k
@@ -120,10 +110,10 @@ ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
        $(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
        sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
                ./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
-       PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
-               $(BIN_DIR)/$(IMG_PREFIX)-$(1).image \
-               $(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript \
-               $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+       PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
+               $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+               $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.bootscript \
+               $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
   endef
 
 endif
@@ -135,8 +125,8 @@ endef
 define Image/Build/iso 
        $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
        $(CP) \
-               $(STAGING_DIR_HOST)/usr/lib/grub/i386-openwrt/stage2_eltorito \
-               $(KDIR)/root.grub/boot/grub/stage2_eltorito 
+               $(KDIR)/stage2_eltorito \
+               $(KDIR)/root.grub/boot/grub/ 
        sed \
                -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
                -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
@@ -151,11 +141,13 @@ endef
 ifneq ($(CONFIG_X86_VDI_IMAGES),)
   define Image/Build/vdi
     # left here because the image builder doesnt need these
-    ifeq ($(1),ext2)
-               rm $(BIN_DIR)/$(IMG_PREFIX)-ext2.vdi || true
-               VBoxManage convertfromraw -format VDI \
-                       $(BIN_DIR)/$(IMG_PREFIX)-ext2.image \
-                       $(BIN_DIR)/$(IMG_PREFIX)-ext2.vdi
+    ifeq ($(1),ext4)
+               rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
+               qemu-img convert -f raw -O vdi \
+                       $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+                       $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
+               # XXX: VBoxManage insists on setting perms to 0600
+               chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
     endif
   endef
 endif
@@ -163,10 +155,11 @@ endif
 ifneq ($(CONFIG_X86_VMDK_IMAGES),)
   define Image/Build/vmdk
     # left here because the image builder doesnt need these
-    ifeq ($(1),ext2)
-               rm $(BIN_DIR)/$(IMG_PREFIX)-ext2.vmdk || true
-               qemu-img convert -f raw $(BIN_DIR)/$(IMG_PREFIX)-ext2.image \
-                       -O vmdk $(BIN_DIR)/$(IMG_PREFIX)-ext2.vmdk
+    ifeq ($(1),ext4)
+               rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
+               qemu-img convert -f raw -O vmdk \
+                       $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+                       $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
     endif
   endef
 endif
@@ -189,23 +182,12 @@ define Image/Build
        $(call Image/Build/vdi,$(1))
        $(call Image/Build/vmdk,$(1))
   endif
-       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1).fs
+       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
        $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
-  ifeq ($(1),ext2)
-       gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-$(1).image
+  ifeq ($(1),ext4)
+       gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
+       gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
   endif
 endef
 
 $(eval $(call BuildImage))
-
-ifneq ($(CONFIG_X86_VDI_IMAGES),)
-  $(eval $(call RequireCommand,VBoxManage, \
-       You need VBoxManage to generate VirtualBox images. \
-  ))
-endif
-
-ifneq ($(CONFIG_X86_VMDK_IMAGES),)
-  $(eval $(call RequireCommand,qemu-img, \
-       You need qemu-img to generate VMware images. \
-  ))
-endif