-diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Kconfig linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig
---- linux-2.6.17/arch/ppc/platforms/4xx/Kconfig 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig 2006-08-25 23:33:05.000000000 +0200
+diff -urN linux.old/arch/ppc/platforms/4xx/Kconfig linux.dev/arch/ppc/platforms/4xx/Kconfig
+--- linux.old/arch/ppc/platforms/4xx/Kconfig 2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/arch/ppc/platforms/4xx/Kconfig 2006-12-14 08:49:18.000000000 +0100
@@ -52,6 +52,12 @@
help
This option enables support for the IBM PPC405GP evaluation board.
config IBM_OCP
bool
-- depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-+ depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT || MAGICBOX
+- depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
++ depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT || MAGICBOX
default y
config IBM_EMAC4
config BIOS_FIXUP
bool
-- depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-+ depends on BUBINGA || EP405 || SYCAMORE || WALNUT || MAGICBOX
+- depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405
++ depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405 || MAGICBOX
default y
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
default y
config 405GP
-diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c
---- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c 2006-08-25 23:33:05.000000000 +0200
-@@ -0,0 +1,249 @@
-+/*
-+ * Support for IBM PPC 405EP-based MagicBox board
-+ * Copyright (C) 2006 Karol Lewandowski
-+ *
-+ * Heavily based on bubinga.c
-+ *
-+ * Author: SAW (IBM), derived from walnut.c.
-+ * Maintained by MontaVista Software <source@mvista.com>
-+ *
-+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
-+ * terms of the GNU General Public License version 2. This program is
-+ * licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/smp.h>
-+#include <linux/threads.h>
-+#include <linux/param.h>
-+#include <linux/string.h>
-+#include <linux/blkdev.h>
-+#include <linux/pci.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/system.h>
-+#include <asm/pci-bridge.h>
-+#include <asm/processor.h>
-+#include <asm/machdep.h>
-+#include <asm/page.h>
-+#include <asm/time.h>
-+#include <asm/io.h>
-+#include <asm/kgdb.h>
-+#include <asm/ocp.h>
-+#include <asm/ibm_ocp_pci.h>
-+
-+#include <platforms/4xx/ibm405ep.h>
-+
-+#undef DEBUG
-+
-+#ifdef DEBUG
-+#define DBG(x...) printk(x)
-+#else
-+#define DBG(x...)
-+#endif
-+
-+extern bd_t __res;
-+
-+/* Some IRQs unique to board
-+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
-+ */
-+int __init
-+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-+{
-+ static char pci_irq_table[][4] =
-+ /*
-+ * PCI IDSEL/INTPIN->INTLINE
-+ * A B C D
-+ */
-+ {
-+ {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
-+ {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
-+ {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
-+ {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
-+ };
-+
-+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-+ return PCI_IRQ_TABLE_LOOKUP;
-+};
-+
-+
-+/* The serial clock for the chip is an internal clock determined by
-+ * different clock speeds/dividers.
-+ * Calculate the proper input baud rate and setup the serial driver.
-+ */
-+static void __init
-+magicbox_early_serial_map(void)
-+{
-+ u32 uart_div;
-+ int uart_clock;
-+ struct uart_port port;
-+
-+ /* Calculate the serial clock input frequency
-+ *
-+ * The base baud is the PLL OUTA (provided in the board info
-+ * structure) divided by the external UART Divisor, divided
-+ * by 16.
-+ */
-+ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-+ uart_clock = __res.bi_procfreq / uart_div;
-+
-+ /* Setup serial port access */
-+ memset(&port, 0, sizeof(port));
-+ port.membase = (void*)ACTING_UART0_IO_BASE;
-+ port.irq = ACTING_UART0_INT;
-+ port.uartclk = uart_clock;
-+ port.regshift = 0;
-+ port.iotype = SERIAL_IO_MEM;
-+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-+ port.line = 0;
-+
-+ if (early_serial_setup(&port) != 0) {
-+ printk("Early serial init of port 0 failed\n");
-+ }
-+
-+ port.membase = (void*)ACTING_UART1_IO_BASE;
-+ port.irq = ACTING_UART1_INT;
-+ port.line = 1;
-+
-+ if (early_serial_setup(&port) != 0) {
-+ printk("Early serial init of port 1 failed\n");
-+ }
-+}
-+
-+void __init
-+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-+{
-+ unsigned int bar_response, bar;
-+ /*
-+ * Expected PCI mapping:
-+ *
-+ * PLB addr PCI memory addr
-+ * --------------------- ---------------------
-+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
-+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
-+ *
-+ * PLB addr PCI io addr
-+ * --------------------- ---------------------
-+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
-+ *
-+ * The following code is simplified by assuming that the bootrom
-+ * has been well behaved in following this mapping.
-+ */
-+
-+#ifdef DEBUG
-+ int i;
-+
-+ printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-+ printk("PCI bridge regs before fixup \n");
-+ for (i = 0; i <= 3; i++) {
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-+ }
-+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-+
-+#endif
-+
-+ /* added for IBM boot rom version 1.15 bios bar changes -AK */
-+
-+ /* Disable region first */
-+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-+ /* PLB starting addr, PCI: 0x80000000 */
-+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-+ /* PCI start addr, 0x80000000 */
-+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-+ /* 512MB range of PLB to PCI */
-+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-+ /* Enable no pre-fetch, enable region */
-+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-+ (PPC405_PCI_UPPER_MEM -
-+ PPC405_PCI_MEM_BASE)) | 0x01));
-+
-+ /* Disable region one */
-+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-+ out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-+
-+ /* Disable region two */
-+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-+ out_le32((void *) &(pcip->ptm2la), 0x00000000);
-+
-+ /* Zero config bars */
-+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-+ early_write_config_dword(hose, hose->first_busno,
-+ PCI_FUNC(hose->first_busno), bar,
-+ 0x00000000);
-+ early_read_config_dword(hose, hose->first_busno,
-+ PCI_FUNC(hose->first_busno), bar,
-+ &bar_response);
-+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-+ hose->first_busno, PCI_SLOT(hose->first_busno),
-+ PCI_FUNC(hose->first_busno), bar, bar_response);
-+ }
-+ /* end work arround */
-+
-+#ifdef DEBUG
-+ printk("PCI bridge regs after fixup \n");
-+ for (i = 0; i <= 3; i++) {
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-+ }
-+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-+
-+#endif /* DEBUG */
-+}
-+
-+void __init
-+magicbox_setup_arch(void)
-+{
-+ ppc4xx_setup_arch();
-+
-+ ibm_ocp_set_emac(0, 1);
-+
-+ magicbox_early_serial_map();
-+
-+ /* Identify the system */
-+ printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
-+}
-+
-+void __init
-+magicbox_map_io(void)
-+{
-+ ppc4xx_map_io();
-+}
-+
-+void __init
-+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ ppc4xx_init(r3, r4, r5, r6, r7);
-+
-+ ppc_md.setup_arch = magicbox_setup_arch;
-+ ppc_md.setup_io_mappings = magicbox_map_io;
-+
-+#ifdef CONFIG_KGDB
-+ ppc_md.early_serial_map = bubinga_early_serial_map;
-+#endif
-+
-+}
-diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h
---- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h 2006-08-25 23:33:05.000000000 +0200
-@@ -0,0 +1,47 @@
-+/*
-+ * Support for IBM PPC 405EP-based MagicBox board
-+ *
-+ * Heavily based on bubinga.h
-+ *
-+ *
-+ * Author: SAW (IBM), derived from walnut.h.
-+ * Maintained by MontaVista Software <source@mvista.com>
-+ *
-+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
-+ * terms of the GNU General Public License version 2. This program is
-+ * licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#ifdef __KERNEL__
-+#ifndef __MAGICBOX_H__
-+#define __MAGICBOX_H__
-+
-+#include <linux/config.h>
-+#include <platforms/4xx/ibm405ep.h>
-+#include <asm/ppcboot.h>
-+
-+/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
-+
-+/* The UART clock is based off an internal clock -
-+ * define BASE_BAUD based on the internal clock and divider(s).
-+ * Since BASE_BAUD must be a constant, we will initialize it
-+ * using clock/divider values which OpenBIOS initializes
-+ * for typical configurations at various CPU speeds.
-+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
-+ */
-+#define BASE_BAUD 0
-+
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-+
-+#define PPC4xx_MACHINE_NAME "MagicBox"
-+
-+#endif /* __MAGICBOX_H__ */
-+#endif /* __KERNEL__ */
-diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Makefile linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile
---- linux-2.6.17/arch/ppc/platforms/4xx/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile 2006-08-25 23:33:05.000000000 +0200
+diff -urN linux.old/arch/ppc/platforms/4xx/Makefile linux.dev/arch/ppc/platforms/4xx/Makefile
+--- linux.old/arch/ppc/platforms/4xx/Makefile 2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/arch/ppc/platforms/4xx/Makefile 2006-12-14 08:48:56.000000000 +0100
@@ -13,6 +13,7 @@
obj-$(CONFIG_REDWOOD_6) += redwood6.o
obj-$(CONFIG_SYCAMORE) += sycamore.o
obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o
obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o
-diff -Nur linux-2.6.17/include/asm-ppc/ibm4xx.h linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h
---- linux-2.6.17/include/asm-ppc/ibm4xx.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h 2006-08-25 23:33:05.000000000 +0200
-@@ -19,6 +19,10 @@
+diff -urN linux.old/include/asm-ppc/ibm4xx.h linux.dev/include/asm-ppc/ibm4xx.h
+--- linux.old/include/asm-ppc/ibm4xx.h 2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/include/asm-ppc/ibm4xx.h 2006-12-14 08:48:56.000000000 +0100
+@@ -18,6 +18,10 @@
#ifdef CONFIG_40x
projects / openwrt.git / blobdiff