enable dso support back in openssl, needed to use shared zlib compression, and should...

[openwrt.git] / package / mtd / src / mtd.c

diff --git a/package/mtd/src/mtd.c b/package/mtd/src/mtd.c
index 23e9916..0a96840 100644 (file)
--- a/package/mtd/src/mtd.c
+++ b/package/mtd/src/mtd.c
@@ -28,19 +28,22 @@
 #include <stdlib.h>
 #include <stdio.h>
 #include <stdint.h>
+#include <sys/ioctl.h>
+#include <sys/syscall.h>
 #include <fcntl.h>
 #include <errno.h>
 #include <error.h>
 #include <time.h>
+#include <string.h>
 #include <sys/ioctl.h>
 #include <sys/types.h>
 #include <sys/param.h>
 #include <sys/mount.h>
 #include <sys/stat.h>
 #include <sys/reboot.h>
-#include <string.h>
+#include <linux/reboot.h>
 
-#include <linux/mtd/mtd.h>
+#include "mtd.h"
 
 #define TRX_MAGIC       0x30524448      /* "HDR0" */
 #define BUFSIZE (16 * 1024)
@@ -62,14 +65,19 @@ struct trx_header {
 
 char buf[BUFSIZE];
 int buflen;
+int quiet;
 
+#ifdef target_brcm
 int
-image_check_bcom(int imagefd, const char *mtd)
+image_check_brcm(int imagefd, const char *mtd)
 {
        struct trx_header *trx = (struct trx_header *) buf;
        struct mtd_info_user mtdInfo;
        int fd;
 
+       if (strcmp(mtd, "linux") != 0)
+               return 1;
+       
        buflen = read(imagefd, buf, 32);
        if (buflen < 32) {
                fprintf(stdout, "Could not get image header, file too small (%ld bytes)\n", buflen);
@@ -88,10 +96,11 @@ image_check_bcom(int imagefd, const char *mtd)
        }
        
        if (trx->magic != TRX_MAGIC || trx->len < sizeof(struct trx_header)) {
-               fprintf(stderr, "Bad trx header\n");
-               fprintf(stderr, "If this is a firmware in bin format, like some of the\n"
-                               "original firmware files are, use following command to convert to trx:\n"
-                               "dd if=firmware.bin of=firmware.trx bs=32 skip=1\n");
+               if (quiet < 2) {
+                       fprintf(stderr, "Bad trx header\n");
+                       fprintf(stderr, "If this is a firmware in bin format, like some of the\n"
+                                       "original firmware files are, you need to convert it to trx.\n");
+               }
                return 0;
        }
 
@@ -116,6 +125,7 @@ image_check_bcom(int imagefd, const char *mtd)
        close(fd);
        return 1;
 }
+#endif /* target_brcm */
 
 int
 image_check(int imagefd, const char *mtd)
@@ -125,23 +135,9 @@ image_check(int imagefd, const char *mtd)
        char *c;
        FILE *f;
 
-       systype = SYSTYPE_UNKNOWN;
-       f = fopen("/proc/cpuinfo", "r");
-       while (!feof(f) && (fgets(buf, BUFSIZE - 1, f) != NULL)) {
-               if ((strncmp(buf, "system type", 11) == 0) && (c = strchr(buf, ':'))) {
-                       c += 2;
-                       if (strncmp(c, "Broadcom BCM947XX", 17) == 0)
-                               systype = SYSTYPE_BROADCOM;
-               }
-       }
-       fclose(f);
-       
-       switch(systype) {
-               case SYSTYPE_BROADCOM:
-                       return image_check_bcom(imagefd, mtd);
-               default:
-                       return 1;
-       }
+#ifdef target_brcm
+       return image_check_brcm(imagefd, mtd);
+#endif
 }
 
 int mtd_check(char *mtd)
@@ -201,13 +197,18 @@ mtd_open(const char *mtd, int flags)
        FILE *fp;
        char dev[PATH_MAX];
        int i;
+       int ret;
 
        if ((fp = fopen("/proc/mtd", "r"))) {
                while (fgets(dev, sizeof(dev), fp)) {
                        if (sscanf(dev, "mtd%d:", &i) && strstr(dev, mtd)) {
                                snprintf(dev, sizeof(dev), "/dev/mtd/%d", i);
+                               if ((ret=open(dev, flags))<0) {
+                                       snprintf(dev, sizeof(dev), "/dev/mtd%d", i);
+                                       ret=open(dev, flags);
+                               }
                                fclose(fp);
-                               return open(dev, flags);
+                               return ret;
                        }
                }
                fclose(fp);
@@ -242,11 +243,8 @@ mtd_erase(const char *mtd)
                 mtdEraseInfo.start += mtdInfo.erasesize) {
                
                ioctl(fd, MEMUNLOCK, &mtdEraseInfo);
-               if(ioctl(fd, MEMERASE, &mtdEraseInfo)) {
-                       fprintf(stderr, "Could not erase MTD device: %s\n", mtd);
-                       close(fd);
-                       exit(1);
-               }
+               if(ioctl(fd, MEMERASE, &mtdEraseInfo))
+                       fprintf(stderr, "Failed to erase block on %s at 0x%x\n", mtd, mtdEraseInfo.start);
        }               
 
        close(fd);
@@ -255,7 +253,7 @@ mtd_erase(const char *mtd)
 }
 
 int
-mtd_write(int imagefd, const char *mtd, int quiet)
+mtd_write(int imagefd, const char *mtd)
 {
        int fd, i, result;
        size_t r, w, e;
@@ -346,7 +344,7 @@ void usage(void)
 
 int main (int argc, char **argv)
 {
-       int ch, i, boot, unlock, imagefd, force, quiet, unlocked;
+       int ch, i, boot, unlock, imagefd, force, unlocked;
        char *erase[MAX_ARGS], *device, *imagefile;
        enum {
                CMD_ERASE,
@@ -413,10 +411,10 @@ int main (int argc, char **argv)
        
                /* check trx file before erasing or writing anything */
                if (!image_check(imagefd, device)) {
-                       if ((quiet < 2) || !force)
-                               fprintf(stderr, "TRX check failed!\n");
-                       if (!force)
+                       if (!force) {
+                               fprintf(stderr, "Image check failed.\n");
                                exit(1);
+                       }
                } else {
                        if (!mtd_check(device)) {
                                fprintf(stderr, "Can't open device for writing!\n");
@@ -460,7 +458,7 @@ int main (int argc, char **argv)
                case CMD_WRITE:
                        if (quiet < 2)
                                fprintf(stderr, "Writing from %s to %s ... ", imagefile, device);
-                       mtd_write(imagefd, device, quiet);
+                       mtd_write(imagefd, device);
                        if (quiet < 2)
                                fprintf(stderr, "\n");
                        break;
@@ -468,8 +466,9 @@ int main (int argc, char **argv)
 
        sync();
        
-       if (boot)
-               kill(1, 15); // send SIGTERM to init for reboot
-
+       if (boot) {
+               fflush(stdout);
+               syscall(SYS_reboot,LINUX_REBOOT_MAGIC1,LINUX_REBOOT_MAGIC2,LINUX_REBOOT_CMD_RESTART,NULL);
+       }
        return 0;
 }