Enable the default-on led trigger

[openwrt.git] / target / linux / ps3 / README

diff --git a/target/linux/ps3/README b/target/linux/ps3/README
index 8e75980..e97e48c 100644 (file)
--- a/target/linux/ps3/README
+++ b/target/linux/ps3/README
@@ -11,10 +11,13 @@ in the PS3's menu.
 
 Depending on your monitor, you may need to alter the kernel command
 line options. The default is to autodetect, which should work on most
 
 Depending on your monitor, you may need to alter the kernel command
 line options. The default is to autodetect, which should work on most

-monitors. However, if you get a blank screen on boot, try changing
-(through make kernel_menuconfig) "video=ps3fb:mode:0" to
-"video=ps3fb:mode:1" for 480i, or "video=ps3fb:mode:3" for 720p. The
-possible modes are:
+monitors. However, if you get a blank screen on boot, or you'd like to
+use a different resolution, you can specify a different video mode.
+
+To do this, 'make kernel_menuconfig' and go to 'Kernel Options' ->
+'Initial kernel command string', and add a video= parameter - for
+example "video=720p". You can also specify a vide mode explicitly,
+for example "video=9" for 1080i at 50Hz. Possible mode ids are:

 
 Video mode ID:
  0:auto mode
 
 Video mode ID:
  0:auto mode