Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
+config BUSYBOX_CONFIG_BBCONFIG
+ bool "bbconfig"
+ default n
+ help
+ The bbconfig applet will print the config file with which
+ busybox was built.
+
+config BUSYBOX_CONFIG_CHRT
+ bool "chrt"
+ default n
+ help
+ manipulate real-time attributes of a process.
+ This requires sched_{g,s}etparam support in your libc.
+
config BUSYBOX_CONFIG_CROND
bool "crond"
default y
select BUSYBOX_CONFIG_FEATURE_SUID
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Crond is a background daemon that parses individual crontab
files and executes commands on behalf of the users in question.
Note that Busybox binary must be setuid root for this applet to
work properly.
+config BUSYBOX_CONFIG_DEBUG_CROND_OPTION
+ bool "Support debug option -d"
+ depends on BUSYBOX_CONFIG_CROND
+ default n
+ help
+ Support option -d to enter debug mode.
+
config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
- bool " Using /usr/sbin/sendmail?"
+ bool "Using /usr/sbin/sendmail?"
default n
depends on BUSYBOX_CONFIG_CROND
help
config BUSYBOX_CONFIG_CRONTAB
bool "crontab"
default y
+ select BUSYBOX_CONFIG_FEATURE_SUID
help
Crontab manipulates the crontab for a particular user. Only
the superuser may specify a different user and/or crontab directory.
precision arithmetic.
config BUSYBOX_CONFIG_DEVFSD
- bool "devfsd"
+ bool "devfsd (obsolete)"
default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
+ This is deprecated, and will be removed at the end of 2008.
+
Provides compatibility with old device names on a devfs systems.
You should set it to true if you have devfs enabled.
The following keywords in devsfd.conf are supported:
default n
depends on BUSYBOX_CONFIG_DEVFSD
help
- This actually doesn't work with busybox modutils but needs the real modutils.
+ This actually doesn't work with busybox modutils but needs
+ the external modutils.
config BUSYBOX_CONFIG_DEVFSD_FG_NP
bool "Enables the -fg and -np options"
help
Increases logging to stderr or syslog.
+config BUSYBOX_CONFIG_FEATURE_DEVFS
+ bool " Use devfs names for all devices (obsolete)"
+ default n
+ help
+ This is obsolete and will be going away at the end of 2008..
+
+ This tells busybox to look for names like /dev/loop/0 instead of
+ /dev/loop0. If your /dev directory has normal names instead of
+ devfs names, you don't want this.
+
+config BUSYBOX_CONFIG_EJECT
+ bool "eject"
+ default n
+ help
+ Used to eject cdroms. (defaults to /dev/cdrom)
+
config BUSYBOX_CONFIG_LAST
bool "last"
default n
- select BUSYBOX_CONFIG_FEATURE_U_W_TMP
+ select BUSYBOX_CONFIG_FEATURE_WTMP
help
'last' displays a list of the last users that logged into the system.
+config BUSYBOX_CONFIG_LESS
+ bool "less"
+ default y
+ help
+ 'less' is a pager, meaning that it displays text files. It possesses
+ a wide array of features, and is an improvement over 'more'.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES
+ int "Max number of input lines less will try to eat"
+ default 9999999
+ depends on BUSYBOX_CONFIG_LESS
+
+config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS
+ bool "Enable bracket searching"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ This option adds the capability to search for matching left and right
+ brackets, facilitating programming.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
+ bool "Enable extra flags"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ The extra flags provided do the following:
+
+ The -M flag enables a more sophisticated status line.
+ The -m flag enables a simpler status line with a percentage.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS
+ bool "Enable flag changes"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ This enables the ability to change command-line flags within
+ less itself.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
+ bool "Enable marks"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ Marks enable positions in a file to be stored for easy reference.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP
+ bool "Enable regular expressions"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ Enable regular expressions, allowing complex file searches.
+
config BUSYBOX_CONFIG_HDPARM
bool "hdparm"
default n
help
Get/Set hard drive parameters. Primarily intended for ATA
drives. Adds about 13k (or around 30k if you enable the
- BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY option)....
+ FEATURE_HDPARM_GET_IDENTITY option)....
config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
- bool " Support obtaining detailed information directly from drives"
+ bool "Support obtaining detailed information directly from drives"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
- Enables the -I and -Istdin options to obtain detailed information
+ Enables the -I and -i options to obtain detailed information
directly from drives about their capabilities and supported ATA
- feature set. Enabling this option will add about 16k...
+ feature set. If no device name is specified, hdparm will read
+ identify data from stdin. Enabling this option will add about 16k...
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
- bool " Register an IDE interface (DANGEROUS)"
+ bool "Register an IDE interface (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
- bool " Un-register an IDE interface (DANGEROUS)"
+ bool "Un-register an IDE interface (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
- bool " perform device reset (DANGEROUS)"
+ bool "perform device reset (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
- bool " tristate device for hotswap (DANGEROUS)"
+ bool "tristate device for hotswap (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
- bool " get/set using_dma flag (DANGEROUS)"
+ bool "get/set using_dma flag (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -d' option to get/set using_dma flag.
This is dangerous stuff, so you should probably say N.
+config BUSYBOX_CONFIG_LOCK
+ bool "lock"
+ default y
+ help
+ Small utility for using locks in scripts
+
config BUSYBOX_CONFIG_MAKEDEVS
bool "makedevs"
default n
help
- 'makedevs' is a utility used and created by the Linux Router Project.
- It creates a large number of device special files (/dev devices)
- rather quickly, and can be considerably faster then running mknod a
- zillion times.
+ 'makedevs' is a utility used to create a batch of devices with
+ one command.
+ .
+ There are two choices for command line behaviour, the interface
+ as used by LEAF/Linux Router Project, or a device table file.
+ .
+ 'leaf' is traditionally what busybox follows, it allows multiple
+ devices of a particluar type to be created per command.
+ e.g. /dev/hda[0-9]
+ Device properties are passed as command line arguments.
+ .
+ 'table' reads device properties from a file or stdin, allowing
+ a batch of unrelated devices to be made with one command.
+ User/group names are allowed as an alternative to uid/gid.
+
+choice
+ prompt "Choose makedevs behaviour"
+ depends on BUSYBOX_CONFIG_MAKEDEVS
+ default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
+
+config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF
+ bool "leaf"
+
+config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
+ bool "table"
+
+endchoice
+
+config BUSYBOX_CONFIG_MICROCOM
+ bool "microcom"
+ default n
+ help
+ The poor man's minicom utility for chatting with serial port devices.
+
+config BUSYBOX_CONFIG_MOUNTPOINT
+ bool "mountpoint"
+ default n
+ help
+ mountpoint checks if the directory is a mountpoint.
config BUSYBOX_CONFIG_MT
bool "mt"
to advance or rewind a tape past a specified number of archive
files on the tape.
+config BUSYBOX_CONFIG_RAIDAUTORUN
+ bool "raidautorun"
+ default n
+ help
+ raidautorun tells the kernel md driver to
+ search and start RAID arrays.
+
+config BUSYBOX_CONFIG_READAHEAD
+ bool "readahead"
+ default n
+ depends on BUSYBOX_CONFIG_LFS
+ help
+ Preload the files listed on the command line into RAM cache so that
+ subsequent reads on these files will not block on disk I/O.
+
+ This applet just calls the readahead(2) system call on each file.
+ It is mainly useful in system startup scripts to preload files
+ or executables before they are used. When used at the right time
+ (in particular when a CPU boundprocess is running) it can
+ significantly speed up system startup.
+
+ As readahead(2) blocks until each file has been read, it is best to
+ run this applet as a background job.
+
+config BUSYBOX_CONFIG_RUNLEVEL
+ bool "runlevel"
+ default n
+ help
+ find the current and previous system runlevel.
+
+ This applet uses utmp but does not rely on busybox supporing
+ utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
+
config BUSYBOX_CONFIG_RX
- bool "rx"
+ bool "rx"
default n
help
- Receive files using the Xmodem protocol.
+ Receive files using the Xmodem protocol.
config BUSYBOX_CONFIG_STRINGS
bool "strings"
strings prints the printable character sequences for each file
specified.
+config BUSYBOX_CONFIG_SETSID
+ bool "setsid"
+ default n
+ help
+ setsid runs a program in a new session
+
+config BUSYBOX_CONFIG_TASKSET
+ bool "taskset"
+ default n
+ help
+ Retrieve or set a processes's CPU affinity.
+ This requires sched_{g,s}etaffinity support in your libc.
+
+config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
+ bool "fancy output"
+ default n
+ depends on BUSYBOX_CONFIG_TASKSET
+ help
+ Add code for fancy output. This merely silences a compiler-warning
+ and adds about 135 Bytes. May be needed for machines with alot
+ of CPUs.
+
config BUSYBOX_CONFIG_TIME
bool "time"
default y
When the command finishes, time writes a message to standard output
giving timing statistics about this program run.
+config BUSYBOX_CONFIG_TTYSIZE
+ bool "ttysize"
+ default n
+ help
+ A replacement for "stty size". Unlike stty, can report only width,
+ only height, or both, in any order. It also does not complain on error,
+ but returns default 80x24. Usage in shell scripts: width=`ttysize w`.
+
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog"
- default n
+ default y
help
The watchdog utility is used with hardware or software watchdog
device drivers. It opens the specified watchdog device special file
projects / openwrt.git / blobdiff