remove config for non supported kernel version

[openwrt.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 4cc23d2..c874353 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -13,7 +13,7 @@ start() {
                        # WGT634u
                        echo boardtype=wgt634u
                else
                        # WGT634u
                        echo boardtype=wgt634u
                else

-                       strings /dev/mtdblock/3
+                       strings "$(find_mtd_part nvram)"

                fi
        ) | awk '
        function p(cfgname, name) {
                fi
        ) | awk '
        function p(cfgname, name) {


@@ -47,11 +47,11 @@ start() {
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
        }
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
        }

-       
+

        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
                nvram[$1] = $2
        }
        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
                nvram[$1] = $2
        }

-       
+

        END {
                if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
                        c["wan_ifname"] = ""
        END {
                if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
                        c["wan_ifname"] = ""


@@ -61,6 +61,15 @@ start() {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }

+               if (model == "ASUS WL-500g Premium V2") {
+                               c["vlan0ports"] = "0 1 2 3 5*"
+                               c["vlan1ports"] = "4 5"
+               }
+
+               if (model == "Dell TrueMobile 2300") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }

                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                        c["lan_ifname"] = "eth0"
                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                        c["lan_ifname"] = "eth0"


@@ -100,10 +109,17 @@ start() {
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }

-       
+
+               # Sitecom WL-105b
+               if ((nvram["boardum"] == "2") && \
+                       (nvram["GemtekPmonVer"] == "1")) {
+                       c["lan_ifname"]="eth0"
+                       c["wan_ifname"]=""
+               }
+

                # ASUS WL-700gE
                # These are actually same as defaults above. For some reason this script applies
                # ASUS WL-700gE
                # These are actually same as defaults above. For some reason this script applies

-               # Generic BCM94704 settings instead so we revert to proper settings here.       
+               # Generic BCM94704 settings instead so we revert to proper settings here.

                # Hopefully someone will fix this properly soon.
                if (model == "ASUS WL-700gE") {
                        c["lan_ifname"]="eth0.0"
                # Hopefully someone will fix this properly soon.
                if (model == "ASUS WL-700gE") {
                        c["lan_ifname"]="eth0.0"


@@ -111,7 +127,12 @@ start() {
                        c["vlan0ports"]="1 2 3 4 5*"
                        c["vlan1ports"]="0 5"
                }
                        c["vlan0ports"]="1 2 3 4 5*"
                        c["vlan1ports"]="0 5"
                }

-               
+
+               if (model == "Motorola WR850G V2/V3") {
+                       c["vlan0ports"]="0 1 2 3 5*"
+                       c["vlan1ports"]="4 5"
+               }
+

                print "#### VLAN configuration "
                print "config switch eth0"
                p("vlan0", "vlan0ports")
                print "#### VLAN configuration "
                print "config switch eth0"
                p("vlan0", "vlan0ports")