X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/02cdebbb91a33d8e24da1c94a9d93ac39be168a7..66dc49ab6471b55b38fa2103d9b11473c0b66611:/package/madwifi/Makefile?ds=sidebyside

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index 07e2c4539..962795ab2 100644
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -10,16 +10,20 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_VERSION:=0.9.0
+PKG_VERSION:=0.9.2
 PKG_RELEASE:=1
-PKG_MD5SUM:=9b558d1df84cab2b0006c595feee0fba
 
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=@SF/$(PKG_NAME)
+PKG_MD5SUM:=a75baacbe07085ddc5cb28e1fb43edbb
 PKG_CAT:=bzcat
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+include $(INCLUDE_DIR)/package.mk
+
+RATE_CONTROL:=sample
+
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf
 endif
@@ -32,13 +36,16 @@ endif
 ifeq ($(ARCH),armeb)
   HAL_TARGET:=xscale-be-elf
 endif
+ifeq ($(ARCH),powerpc)
+  HAL_TARGET:=powerpc-be-elf
+endif
 
-BUS := PCI
+BUS:=PCI
 ifneq ($(CONFIG_LINUX_2_4_AR531X),)
-  BUS := AHB
+  BUS:=AHB
 endif
 ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
-  BUS := PCI AHB	# no suitable HAL for AHB yet.
+  BUS:=PCI AHB	# no suitable HAL for AHB yet.
 endif
 
 BUS_MODULES:=
@@ -49,6 +56,41 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
   BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
 endif
 
+MADWIFI_AUTOLOAD:= \
+	wlan \
+	wlan_scan_ap \
+	wlan_scan_sta \
+	ath_hal \
+	ath_rate_$(RATE_CONTROL) \
+	wlan_acl \
+	wlan_ccmp \
+	wlan_tkip \
+	wlan_wep \
+	wlan_xauth
+
+ifeq ($(findstring AHB,$(BUS)),AHB)
+	MADWIFI_AUTOLOAD += ath_ahb
+endif
+ifeq ($(findstring PCI,$(BUS)),PCI)
+	MADWIFI_AUTOLOAD += ath_pci
+endif
+
+define KernelPackage/madwifi
+  SUBMENU:=Wireless Drivers
+  DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
+  TITLE:=Driver for Atheros wireless chipsets
+  DESCRIPTION:=\
+	This package contains a driver for Atheros 802.11a/b/g chipsets.
+  URL:=http://madwifi.org/
+  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+  FILES:= \
+		$(PKG_BUILD_DIR)/ath/ath_hal.$(LINUX_KMOD_SUFFIX) \
+		$(BUS_MODULES) \
+		$(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+		$(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
+endef
+
 MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
 		PATH="$(TARGET_PATH)" \
 		ARCH="$(LINUX_KARCH)" \
@@ -57,26 +99,25 @@ MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
 		TOOLPREFIX="$(KERNEL_CROSS)" \
 		TOOLPATH="$(KERNEL_CROSS)" \
 		KERNELPATH="$(LINUX_DIR)" \
-		LDOPTS="" \
+		LDOPTS=" " \
+		ATH_RATE="ath_rate/$(RATE_CONTROL)" \
 		DOMULTI=1
 
-include $(INCLUDE_DIR)/package.mk
-
 ifeq ($(findstring AHB,$(BUS)),AHB)
-define Build/Compile/ahb
+  define Build/Compile/ahb
 	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endef
+  endef
 endif
 
 ifeq ($(findstring PCI,$(BUS)),PCI)
-define Build/Compile/pci
+  define Build/Compile/pci
 	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endef
+  endef
 endif
 
 define Build/Compile
-$(call Build/Compile/ahb)
-$(call Build/Compile/pci)
+	$(call Build/Compile/ahb)
+	$(call Build/Compile/pci)
 endef
 
 define Build/InstallDev
@@ -87,39 +128,15 @@ define Build/InstallDev
 endef
 
 define Build/UninstallDev
-	rm -rf $(STAGING_DIR)/usr/include/madwifi
+	rm -rf	$(STAGING_DIR)/usr/include/madwifi
 endef
 
-define Package/kmod-madwifi
- SECTION:=drivers
- CATEGORY:=Drivers
- DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
- TITLE:=Driver for Atheros wireless chipsets
- DESCRIPTION:=Driver for Atheros 802.11a/b/g chipsets
- URL:=http://madwifi.org/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
-
-define Package/kmod-madwifi/install
-	mkdir -p $(1)/etc/modules.d
+define KernelPackage/madwifi/install
 	mkdir -p $(1)/etc/init.d
 	mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
 	mkdir -p $(1)/usr/sbin
-	install -m0644 ./files/madwifi.modules $(1)/etc/modules.d/20-madwifi
-ifeq ($(findstring AHB,$(BUS)),AHB)
-	echo ath_ahb >> $(1)/etc/modules.d/20-madwifi
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-	echo ath_pci >> $(1)/etc/modules.d/20-madwifi
-endif
-	install -m0755 ./files/madwifi.init $(1)/etc/init.d/S20madwifi
-	$(CP) \
-		$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
-		$(BUS_MODULES) \
-		$(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
-		$(1)/lib/modules/$(LINUX_VERSION)/
+	install -m0755 ./files/madwifi.init $(1)/etc/init.d/madwifi
 	$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
 endef
 
-$(eval $(call BuildPackage,kmod-madwifi))
+$(eval $(call KernelPackage,madwifi))