X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/1bd851b509d3a9236fb236fa6c4a861b53465540..d33e1ea7fdbff03a730162b0b830f147595bb390:/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c
index bc269bba1..dcffec000 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c
@@ -1,7 +1,7 @@
 /*
  *  Asus RT-N15 board support
  *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -13,12 +13,15 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/leds.h>
+#include <linux/rtl8366.h>
+#include <linux/ethtool.h>
 
 #include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev_gpio_leds.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
 #include <asm/mach-ralink/rt288x.h>
 #include <asm/mach-ralink/rt288x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
 
 #include "devices.h"
 
@@ -26,7 +29,12 @@
 #define RT_N15_GPIO_BUTTON_WPS		0
 #define RT_N15_GPIO_BUTTON_RESET	12
 
-#ifdef CONFIG_MTD_PARTITIONS
+#define RT_N15_GPIO_RTL8366_SCK		2
+#define RT_N15_GPIO_RTL8366_SDA		1
+
+#define RT_N15_KEYS_POLL_INTERVAL	20
+#define RT_N15_KEYS_DEBOUNCE_INTERVAL	(3 * RT_N15_KEYS_POLL_INTERVAL)
+
 static struct mtd_partition rt_n15_partitions[] = {
 	{
 		.name	= "u-boot",
@@ -46,24 +54,21 @@ static struct mtd_partition rt_n15_partitions[] = {
 	}, {
 		.name	= "kernel",
 		.offset	= 0x050000,
-		.size	= 0x0b0000,
+		.size   = 0x0d0000,
 	}, {
 		.name	= "rootfs",
-		.offset	= 0x100000,
-		.size	= 0x300000,
+		.offset = 0x120000,
+		.size   = 0x2e0000,
 	}, {
-		.name	= "openwrt",
+		.name	= "firmware",
 		.offset	= 0x050000,
 		.size	= 0x3b0000,
 	}
 };
-#endif /* CONFIG_MTD_PARTITIONS */
 
 static struct physmap_flash_data rt_n15_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
 	.nr_parts	= ARRAY_SIZE(rt_n15_partitions),
 	.parts		= rt_n15_partitions,
-#endif
 };
 
 static struct gpio_led rt_n15_leds_gpio[] __initdata = {
@@ -74,14 +79,60 @@ static struct gpio_led rt_n15_leds_gpio[] __initdata = {
 	}
 };
 
+static struct gpio_keys_button rt_n15_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= RT_N15_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= RT_N15_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct rtl8366_platform_data rt_n15_rtl8366s_data = {
+	.gpio_sda        = RT_N15_GPIO_RTL8366_SDA,
+	.gpio_sck        = RT_N15_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device rt_n15_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &rt_n15_rtl8366s_data,
+	}
+};
+
 static void __init rt_n15_init(void)
 {
-	rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+	rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
 
 	rt288x_register_flash(0, &rt_n15_flash_data);
 
 	ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio),
 				  rt_n15_leds_gpio);
+
+	ramips_register_gpio_buttons(-1, RT_N15_KEYS_POLL_INTERVAL,
+				     ARRAY_SIZE(rt_n15_gpio_buttons),
+				     rt_n15_gpio_buttons);
+
+	platform_device_register(&rt_n15_rtl8366s_device);
+
+	rt288x_register_wifi();
+
+	rt288x_eth_data.speed = SPEED_1000;
+	rt288x_eth_data.duplex = DUPLEX_FULL;
+	rt288x_eth_data.tx_fc = 1;
+	rt288x_eth_data.rx_fc = 1;
+	rt288x_register_ethernet();
+	rt288x_register_wdt();
 }
 
 MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init);