X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/1c73a029a0804c275977636c7fc96a138df4321d..8a7ccc3ff97c236f809f5b0fc067512307792570:/target/linux/Config.in?ds=sidebyside diff --git a/target/linux/Config.in b/target/linux/Config.in index bcb8179d3..a6153cebf 100644 --- a/target/linux/Config.in +++ b/target/linux/Config.in @@ -1,259 +1,177 @@ +menu "Kernel Configuration / Device Support" -config BR2_LINUX_2_4 - bool "Linux 2.4" - default y +comment "Kernel modules" -config BR2_LINUX_2_4_BRCM - bool "Support for Broadcom based routers" - default y - help - Build firmware images for Broadcom based routers - (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G) - - This one builds the generic .trx images, activate one of the - options below for creating device specific files for use - with TFTP client too. - - config BR2_TARGET_WRT54G - default y - depends BR2_LINUX_2_4_BRCM - bool "Linksys WRT54G" - - config BR2_TARGET_WRT54GS - default y - depends BR2_LINUX_2_4_BRCM - bool "Linksys WRT54GS" - - config BR2_TARGET_MOTOROLA - default y - depends BR2_LINUX_2_4_BRCM - bool "Motorola WR850G" - -config BR2_LINUX_2_4_AR7 - bool "Support for TI AR7 based devices" - default n - help - Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2) - -comment "Kernel Modules" +menu "Multimedia devices support" -config BR2_PACKAGE_KMOD_DIAG - tristate "Router LED/Button Driver" - default y - help - Driver for the LEDs on Wireless Routers (diag) - -config BR2_PACKAGE_KMOD_BRCM_WL - tristate "Broadcom Wireless Network Driver" - depends BR2_LINUX_2_4_BRCM - default y - help - Proprietary driver for Broadcom Wireless chipsets - -config BR2_PACKAGE_KMOD_BRCM_ET - tristate "Broadcom Ethernet Driver" - depends BR2_LINUX_2_4_BRCM - default y - help - Proprietary driver for Broadcom Ethernet chipsets - -config BR2_PACKAGE_KMOD_B44 - tristate "Broadcom 44XX, 47XX ethernet driver" +config PACKAGE_KMOD_PWC + prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras" + tristate + depends PACKAGE_kmod-usb-core default m - help - Free driver for Broadcom Ethernet chipsets (without switch support) -config BR2_PACKAGE_KMOD_ARPT - tristate "ARP firewalling support" +config PACKAGE_KMOD_VIDEODEV + prompt "kmod-videodev..................... Video (For Linux) kernel support" + tristate default m - help - Kernel modules for ARP firewalling -config BR2_PACKAGE_KMOD_EBT - tristate "Ethernet Bridge firewalling support" - default m - help - Kernel modules for bridge firewalling +endmenu -config BR2_PACKAGE_KMOD_IPTABLES_V4 - tristate "Basic set of kernel modules for iptables" - default y - help - Kernel modules for IPv4 firewalling -config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA - tristate "Extra modules for iptables" - default m - help - Extra kernel modules for IPv4 firewalling +menu "Network devices support" + depends LINUX_2_4_X86 || LINUX_2_6_X86 -config BR2_PACKAGE_KMOD_IPV6 - tristate "IPv6 support" +config PACKAGE_KMOD_NET_AIRO + prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support" + tristate + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help - Kernel modules for IPv6 protocol support + This is the standard Linux driver to support Cisco/Aironet ISA and + PCI 802.11 wireless cards. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). -config BR2_PACKAGE_KMOD_IPTABLES_V6 - tristate "Kernel modules for ip6tables" - default m - depends BR2_PACKAGE_KMOD_IPV6 - help - IPv6 firewalling support + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. -config BR2_PACKAGE_KMOD_NFS - tristate "NFS support" - default m - help - Kernel modules for NFS support - Includes lockd, nfs and sunrpc -config BR2_PACKAGE_KMOD_CIFS - tristate "CIFS support" +config PACKAGE_KMOD_NET_HERMES + prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support" + tristate + depends LINUX_2_4_X86 || LINUX_2_6_X86 default m help - Kernel modules for CIFS support + A driver for 802.11b wireless cards based based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. -config BR2_PACKAGE_KMOD_USB - tristate "USB support" - default m - -config BR2_PACKAGE_KMOD_USB_CONTROLLER +config PACKAGE_KMOD_NET_HERMES_PCI + prompt "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support" tristate - depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI - default n - -config BR2_PACKAGE_KMOD_USB_UHCI - tristate "Support for UHCI controllers" - default m - depends BR2_PACKAGE_KMOD_USB - select BR2_PACKAGE_KMOD_USB_CONTROLLER - -config BR2_PACKAGE_KMOD_USB_OHCI - tristate "Support for OHCI controllers" - default m - depends BR2_PACKAGE_KMOD_USB - select BR2_PACKAGE_KMOD_USB_CONTROLLER - -config BR2_PACKAGE_KMOD_USB2 - tristate "Support for USB 2.0 controllers" - default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER - -config BR2_PACKAGE_KMOD_USB_STORAGE - tristate "Support for USB storage devices" - default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER - -config BR2_PACKAGE_KMOD_USB_PRINTER - tristate "Support for USB printers" - default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER - -config BR2_PACKAGE_KMOD_USB_ACM - tristate "Support for USB modems/isdn controllers" - default m - depends BR2_PACKAGE_KMOD_USB_CONTROLLER - -config BR2_PACKAGE_KMOD_IDE - tristate "IDE support" default m + depends PACKAGE_KMOD_NET_HERMES help - Kernel modules for IDE support - useful for usb mass storage devices (e.g. on WL-HDD) + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. -config BR2_PACKAGE_KMOD_VFAT - tristate "VFAT filesystem support" +config PACKAGE_KMOD_NET_HERMES_PLX + prompt "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support" + tristate default m + depends PACKAGE_KMOD_NET_HERMES help - Kernel modules for VFAT filesystem support - useful for usb mass storage devices + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco_cs) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. -config BR2_PACKAGE_KMOD_EXT2 - tristate "EXT2 filesystem support" - default m - help - Kernel modules for EXT2 filesystem support -config BR2_PACKAGE_KMOD_EXT3 - tristate "EXT3 filesystem support" - default m - help - Kernel modules for EXT3 filesystem support -config BR2_PACKAGE_KMOD_XFS - tristate "XFS filesystem support" +config PACKAGE_KMOD_NET_PRISM54 + prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support" + tristate + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM default m help - Kernel modules for XFS filesystem support + Enable PCI and Cardbus support for the following chipset based cards: + + * ISL3880 - Prism GT 802.11 b/g + * ISL3877 - Prism Indigo 802.11 a + * ISL3890 - Prism Duette 802.11 a/b/g + + For a complete list of supported cards visit . + Here is the latest confirmed list of supported cards: + + * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + * Allnet ALL0271 PCI Card + * Compex WL54G Cardbus Card + * Corega CG-WLCB54GT Cardbus Card + * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 + * I-O Data WN-G54/CB Cardbus Card + * Kobishi XG-300 aka Z-Com Cardbus Card + * Netgear WG511 Cardbus Card + * Ovislink WL-5400PCI PCI Card + * Peabird WLG-PCI PCI Card + * Sitecom WL-100i Cardbus Card + * Sitecom WL-110i PCI Card + * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card + * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card + * Z-Com XG-900 PCI Card + * Zyxel G-100 Cardbus Card + + If you enable this, you require a firmware file as well. + You will need to copy this to /usr/lib/hotplug/firmware/isl3890. + You can get this non-GPL'd firmware file from the Prism54 project page: + . + + Note: You need a motherboard with DMA support to use any of these cards. -config BR2_PACKAGE_KMOD_HFSPLUS - tristate "HFS+ filesystem support" - default m - help - Kernel modules for HFS+ filesystem support +endmenu -config BR2_PACKAGE_KMOD_LOOP - tristate "loop mount support" - default m - help - Kernel module for loop mount support +menu "PCMCIA/CardBus support" + depends PCMCIA_SUPPORT -config BR2_PACKAGE_KMOD_NBD - tristate "network block device" +config PACKAGE_KMOD_PCMCIA_CORE + prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support" + tristate default m - help - Kernel module for network block device -config BR2_PACKAGE_KMOD_LP - tristate "parallel port and lp support" +config PACKAGE_KMOD_PCMCIA_SERIAL + prompt "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support" + tristate default m - help - Kernel modules for line printer and parallel port support + depends PACKAGE_KMOD_PCMCIA_CORE -config BR2_PACKAGE_KMOD_CRYPTO - tristate "CryptoAPI modules" - default m - select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE - help - Kernel modules for cryptographic algorithms +endmenu -config BR2_PACKAGE_KMOD_PPP - tristate "PPP support" - default m - help - Kernel support for PPP -config BR2_PACKAGE_KMOD_MPPE - tristate "PPP MPPE/MPPC module" - default m - select BR2_PACKAGE_KMOD_CRYPTO - depends BR2_PACKAGE_KMOD_PPP - help - Support for Microsoft PPP Encryption/Compression +menu "Misc. devices support" -config BR2_PACKAGE_KMOD_PPPOE - tristate "PPPoE modules" +config PACKAGE_KMOD_AX25 + prompt "kmod-ax25......................... AX25 support" + tristate default m - depends BR2_PACKAGE_KMOD_PPP help - Support for PPP over Ethernet + Kernel modules for AX25 protocol family + + This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss) -config BR2_PACKAGE_KMOD_TUN - tristate "Universal TUN/TAP driver" +config PACKAGE_KMOD_BLUETOOTH + prompt "kmod-bluetooth.................... Bluetooth drivers and network stack" + tristate + depends PCI_SUPPORT || USB_SUPPORT default m help - Kernel support for the TUN/TAP tunneling device + Bluetooth drivers and network stack -config BR2_PACKAGE_KMOD_GRE - tristate "GRE tunneling driver" +config PACKAGE_KMOD_LP + prompt "kmod-lp........................... Parallel port and lp support" + tristate default m help - Kernel support for GRE tunnels + Kernel modules for line printer and parallel port support -config BR2_PACKAGE_KMOD_SCHED - tristate "Traffic schedulers" +config PACKAGE_KMOD_SOFTDOG + prompt "kmod-softdog...................... Software watchdog" + tristate default m help - Kernel schedulers for IP traffic + Kernel modules for software watchdog driver + +endmenu -source "target/linux/package/Config.in" +endmenu