X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/1d5d64e647517cdd5bc8d0bb8c408babfec51d79..54023e75037f2310e53f4573e603e0b0ced48ede:/package/broadcom-diag/src/diag.c diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index c53ff2f97..8f296248b 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Mike Baker , * Copyright (C) 2006-2007 Felix Fietkau + * Copyright (C) 2008 Andy Boyett * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,7 +19,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * $Id$ */ #include #include @@ -46,6 +46,7 @@ extern u64 uevent_next_seqnum(void); #include "diag.h" #define getvar(str) (nvram_get(str)?:"") +static inline int startswith (char *source, char *cmp) { return !strncmp(source,cmp,strlen(cmp)); } static int fill_event(struct event_t *); static unsigned int gpiomask = 0; module_param(gpiomask, int, 0644); @@ -53,27 +54,39 @@ module_param(gpiomask, int, 0644); enum { /* Linksys */ WAP54GV1, + WAP54GV2, WAP54GV3, WRT54GV1, WRT54G, WRTSL54GS, WRT54G3G, + WRT160N, + WRT300NV11, WRT350N, - + WRT600N, + WRT600NV11, + WRT610N, + /* ASUS */ WLHDD, WL300G, + WL320GE, + WL330GE, WL500G, WL500GD, WL500GP, + WL500GPV2, WL500W, + WL520GC, + WL520GU, ASUS_4702, WL700GE, - + /* Buffalo */ WBR2_G54, WHR_G54S, WHR_HP_G54, + WHR_G125, WHR2_A54G54, WLA2_G54L, WZR_G300N, @@ -85,17 +98,19 @@ enum { /* Siemens */ SE505V1, SE505V2, - + /* US Robotics */ USR5461, /* Dell */ TM2300, + TM2300V2, /* Motorola */ WE800G, WR850GV1, WR850GV2V3, + WR850GP, /* Belkin */ BELKIN_UNKNOWN, @@ -105,13 +120,27 @@ enum { /* Trendware */ TEW411BRPP, - + /* SimpleTech */ STI_NAS, /* D-Link */ DIR130, + DIR320, DIR330, + DWL3150, + + /* Sitecom */ + WL105B, + + /* Western Digital */ + WDNetCenter, + + /* Askey */ + RT210W, + + /* OvisLink */ + WL1600GL, }; static void __init bcm4780_init(void) { @@ -128,6 +157,32 @@ static void __init bcm4780_init(void) { schedule_timeout(HZ * 5); } +static void __init NetCenter_init(void) { + /* unset pin 6 (+12V) */ + int pin = 1 << 6; + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); + /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */ + pin = 1 << 1; + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); + /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */ + bcm4780_init(); +} + +static void __init bcm57xx_init(void) { + int pin = 1 << 2; + +#ifndef LINUX_2_4 + /* FIXME: switch comes up, but port mappings/vlans not right */ + gpio_outen(pin, pin); + gpio_control(pin, 0); + gpio_out(pin, pin); +#endif +} + static struct platform_t __initdata platforms[] = { /* Linksys */ [WAP54GV1] = { @@ -135,11 +190,21 @@ static struct platform_t __initdata platforms[] = { .buttons = { { .name = "reset", .gpio = 1 << 0 }, }, - .leds = { + .leds = { { .name = "diag", .gpio = 1 << 3 }, { .name = "wlan", .gpio = 1 << 4 }, }, }, + [WAP54GV2] = { + .name = "Linksys WAP54G V2", + .buttons = { + { .name = "reset", .gpio = 1 << 0 }, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 5, .polarity = REVERSE }, + /* GPIO 6 is b44 (eth0, LAN) PHY power */ + }, + }, [WAP54GV3] = { .name = "Linksys WAP54G V3", .buttons = { @@ -147,7 +212,7 @@ static struct platform_t __initdata platforms[] = { { .name = "reset", .gpio = 1 << 7 }, { .name = "ses", .gpio = 1 << 0 }, }, - .leds = { + .leds = { /* FIXME: diag? */ { .name = "ses", .gpio = 1 << 1 }, }, @@ -157,7 +222,7 @@ static struct platform_t __initdata platforms[] = { .buttons = { { .name = "reset", .gpio = 1 << 6 }, }, - .leds = { + .leds = { { .name = "diag", .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL }, { .name = "dmz", .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL }, }, @@ -203,6 +268,31 @@ static struct platform_t __initdata platforms[] = { { .name = "3g_blink", .gpio = 1 << 5, .polarity = NORMAL }, }, }, + [WRT160N] = { + .name = "Linksys WRT160N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "ses_blue", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE }, + }, + }, + [WRT300NV11] = { + .name = "Linksys WRT300N V1.1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, // "Reset" on back panel + { .name = "ses", .gpio = 1 << 4 }, // "Reserved" on top panel + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // "Power" + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber + { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green + }, + .platform_init = bcm57xx_init, + }, [WRT350N] = { .name = "Linksys WRT350N", .buttons = { @@ -211,7 +301,56 @@ static struct platform_t __initdata platforms[] = { }, .leds = { { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, - { .name = "ses", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "ses_green", .gpio = 1 << 9, .polarity = REVERSE }, + { .name = "usb_blink", .gpio = 1 << 10, .polarity = REVERSE }, + { .name = "usb", .gpio = 1 << 11, .polarity = REVERSE }, + }, + .platform_init = bcm57xx_init, + }, + [WRT600N] = { + .name = "Linksys WRT600N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 7 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, // Power LED + { .name = "usb", .gpio = 1 << 3, .polarity = REVERSE }, // USB LED + { .name = "wl0_ses_amber", .gpio = 1 << 8, .polarity = REVERSE }, // 2.4Ghz LED Amber + { .name = "wl0_ses_green", .gpio = 1 << 9, .polarity = REVERSE }, // 2.4Ghz LED Green + { .name = "wl1_ses_amber", .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber + { .name = "wl1_ses_green", .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green + }, + .platform_init = bcm57xx_init, + }, + [WRT600NV11] = { + .name = "Linksys WRT600N V1.1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 7 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, // Power LED + { .name = "usb", .gpio = 1 << 3, .polarity = REVERSE }, // USB LED + { .name = "wl0_ses_amber", .gpio = 1 << 8, .polarity = REVERSE }, // 2.4Ghz LED Amber + { .name = "wl0_ses_green", .gpio = 1 << 9, .polarity = REVERSE }, // 2.4Ghz LED Green + { .name = "wl1_ses_amber", .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber + { .name = "wl1_ses_green", .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green + }, + .platform_init = bcm57xx_init, + }, + [WRT610N] = { + .name = "Linksys WRT610N", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 8 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // Power LED + { .name = "usb", .gpio = 1 << 0, .polarity = REVERSE }, // USB LED + { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED amber + { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue }, }, /* Asus */ @@ -234,6 +373,26 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, }, }, + [WL320GE] = { + .name = "ASUS WL-320gE/WL-320gP", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, + { .name = "link", .gpio = 1 << 11, .polarity = REVERSE }, + }, + }, + [WL330GE] = { + .name = "ASUS WL-330gE", + .buttons = { + { .name = "reset", .gpio = 1 << 2 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, + }, + }, [WL500G] = { .name = "ASUS WL-500g", .buttons = { @@ -262,6 +421,17 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 1, .polarity = REVERSE }, }, }, + [WL500GPV2] = { + .name = "ASUS WL-500g Premium V2", + .buttons = { + { .name = "reset", .gpio = 1 << 2 }, + { .name = "ses", .gpio = 1 << 3 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE }, + }, + }, [WL500W] = { .name = "ASUS WL-500W", .buttons = { @@ -272,6 +442,28 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, }, }, + [WL520GC] = { + .name = "ASUS WL-520GC", + .buttons = { + { .name = "reset", .gpio = 1 << 2 }, + { .name = "ses", .gpio = 1 << 3 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE }, + }, + }, + [WL520GU] = { + .name = "ASUS WL-520gU", + .buttons = { + { .name = "reset", .gpio = 1 << 2 }, + { .name = "ses", .gpio = 1 << 3 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE }, + }, + }, [ASUS_4702] = { .name = "ASUS (unknown, BCM4702)", .buttons = { @@ -341,6 +533,21 @@ static struct platform_t __initdata platforms[] = { { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE }, }, }, + [WHR_G125] = { + .name = "Buffalo WHR-G125", + .buttons = { + { .name = "reset", .gpio = 1 << 4 }, + { .name = "bridge", .gpio = 1 << 5 }, + { .name = "ses", .gpio = 1 << 0 }, + }, + .leds = { + { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE }, + { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE }, + { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE }, + }, + }, [WHR2_A54G54] = { .name = "Buffalo WHR2-A54G54", .buttons = { @@ -420,7 +627,8 @@ static struct platform_t __initdata platforms[] = { /* No usable buttons */ }, .leds = { - { .name = "dmz", .gpio = 1 << 4, .polarity = REVERSE }, +// { .name = "power", .gpio = 1 << 0 .polarity = REVERSE }, // Usable when retrofitting D26 (?) + { .name = "dmz", .gpio = 1 << 4, .polarity = REVERSE }, // actual name WWW { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE }, }, }, @@ -431,7 +639,7 @@ static struct platform_t __initdata platforms[] = { }, .leds = { { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, - { .name = "dmz", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "dmz", .gpio = 1 << 0, .polarity = REVERSE }, // actual name WWW { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE }, }, }, @@ -457,6 +665,16 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 7, .polarity = REVERSE }, }, }, + [TM2300V2] = { + .name = "Dell TrueMobile 2300 v2", + .buttons = { + { .name = "reset", .gpio = 1 << 0 }, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE }, + { .name = "power", .gpio = 1 << 7, .polarity = REVERSE }, + }, + }, /* Motorola */ [WE800G] = { .name = "Motorola WE800G", @@ -487,6 +705,18 @@ static struct platform_t __initdata platforms[] = { .buttons = { { .name = "reset", .gpio = 1 << 5 }, }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wan", .gpio = 1 << 6, .polarity = INPUT }, + { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE }, + }, + }, + [WR850GP] = { + .name = "Motorola WR850GP", + .buttons = { + { .name = "reset", .gpio = 1 << 5 }, + }, .leds = { { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE }, @@ -494,6 +724,7 @@ static struct platform_t __initdata platforms[] = { { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE }, }, }, + /* Belkin */ [BELKIN_UNKNOWN] = { .name = "Belkin (unknown)", @@ -549,10 +780,24 @@ static struct platform_t __initdata platforms[] = { { .name = "reserved", .gpio = 1 << 7}, }, .leds = { - { .name = "diag", .gpio = 1 << 0}, + { .name = "diag", .gpio = 1 << 0}, { .name = "blue", .gpio = 1 << 6}, }, }, + [DIR320] = { + .name = "D-Link DIR-320", + .buttons = { + { .name = "reserved", .gpio = 1 << 6}, + { .name = "reset", .gpio = 1 << 7}, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + { .name = "diag", .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */ + { .name = "red", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "blue", .gpio = 1 << 4, .polarity = REVERSE }, + { .name = "usb", .gpio = 1 << 5, .polarity = NORMAL }, + }, + }, [DIR330] = { .name = "D-Link DIR-330", .buttons = { @@ -560,29 +805,165 @@ static struct platform_t __initdata platforms[] = { { .name = "reserved", .gpio = 1 << 7}, }, .leds = { - { .name = "diag", .gpio = 1 << 0}, - { .name = "usb", .gpio = 1 << 4}, + { .name = "diag", .gpio = 1 << 0}, + { .name = "usb", .gpio = 1 << 4}, { .name = "blue", .gpio = 1 << 6}, }, }, + [DWL3150] = { + .name = "D-Link DWL-3150", + .buttons = { + { .name = "reset", .gpio = 1 << 7}, + }, + .leds = { + { .name = "diag", .gpio = 1 << 2}, + { .name = "status", .gpio = 1 << 1}, + }, + }, + /* Double check */ + [WL105B] = { + .name = "Sitecom WL-105b", + .buttons = { + { .name = "reset", .gpio = 1 << 10}, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 4}, + { .name = "power", .gpio = 1 << 3}, + }, + }, + /* Western Digital Net Center */ + [WDNetCenter] = { + .name = "Western Digital NetCenter", + .buttons = { + { .name = "power", .gpio = 1 << 0}, + { .name = "reset", .gpio = 1 << 7}, + }, + .platform_init = NetCenter_init, + }, + /* Askey (and clones) */ + [RT210W] = { + .name = "Askey RT210W", + .buttons = { + /* Power button is hard-wired to hardware reset */ + /* but is also connected to GPIO 7 (probably for bootloader recovery) */ + { .name = "power", .gpio = 1 << 7}, + }, + .leds = { + /* These were verified and named based on Belkin F5D4230-4 v1112 */ + { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, + }, + }, + [WL1600GL] = { + .name = "OvisLink WL-1600GL", + .buttons = { + { .name = "reset", .gpio = 1 << 3 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "wps", .gpio = 1 << 2, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE }, + { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE }, + }, + }, }; static struct platform_t __init *platform_detect(void) { char *boardnum, *boardtype, *buf; + if (strcmp(getvar("nvram_type"), "cfe") == 0) + return &platforms[WGT634U]; + + /* Look for a model identifier */ + + /* Based on "model_name" */ + if ((buf = nvram_get("model_name"))) { + if (!strcmp(buf, "DIR-130")) + return &platforms[DIR130]; + if (!strcmp(buf, "DIR-330")) + return &platforms[DIR330]; + } + + /* Based on "wsc_modelname */ + if ((buf = nvram_get("wsc_modelname"))) { + if (!strcmp(buf, "WRT610N")) + return &platforms[WRT610N]; + } + + /* Based on "model_no" */ + if ((buf = nvram_get("model_no"))) { + if (startswith(buf,"WL700")) /* WL700* */ + return &platforms[WL700GE]; + } + + /* Based on "hardware_version" */ + if ((buf = nvram_get("hardware_version"))) { + if (startswith(buf,"WL500GPV2-")) /* WL500GPV2-* */ + return &platforms[WL500GPV2]; + if (startswith(buf,"WL520GC-")) /* WL520GU-* */ + return &platforms[WL520GC]; + if (startswith(buf,"WL520GU-")) /* WL520GU-* */ + return &platforms[WL520GU]; + if (startswith(buf,"WL330GE-")) /* WL330GE-* */ + return &platforms[WL330GE]; + } + + /* Based on "ModelId" */ + if ((buf = nvram_get("ModelId"))) { + if (!strcmp(buf, "WR850GP")) + return &platforms[WR850GP]; + if (!strcmp(buf, "WR850G")) + return &platforms[WR850GV2V3]; + if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap")) + return &platforms[TM2300]; /* Dell TrueMobile 2300 */ + if (startswith(buf,"WE800G")) /* WE800G* */ + return &platforms[WE800G]; + } + + /* Buffalo */ + if ((buf = (nvram_get("melco_id") ?: nvram_get("buffalo_id")))) { + /* Buffalo hardware, check id for specific hardware matches */ + if (!strcmp(buf, "29bb0332")) + return &platforms[WBR2_G54]; + if (!strcmp(buf, "29129")) + return &platforms[WLA2_G54L]; + if (!strcmp(buf, "30189")) + return &platforms[WHR_HP_G54]; + if (!strcmp(buf, "32093")) + return &platforms[WHR_G125]; + if (!strcmp(buf, "30182")) + return &platforms[WHR_G54S]; + if (!strcmp(buf, "290441dd")) + return &platforms[WHR2_A54G54]; + if (!strcmp(buf, "31120")) + return &platforms[WZR_G300N]; + if (!strcmp(buf, "30083")) + return &platforms[WZR_RS_G54]; + if (!strcmp(buf, "30103")) + return &platforms[WZR_RS_G54HP]; + } + + /* no easy model number, attempt to guess */ boardnum = getvar("boardnum"); boardtype = getvar("boardtype"); - if (strcmp(getvar("nvram_type"), "cfe") == 0) - return &platforms[WGT634U]; - - if (strncmp(getvar("model_no"), "WL700",5) == 0) - return &platforms[WL700GE]; + if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N v1/V1.1 */ + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395")) + return &platforms[WRT600NV11]; + + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0")) + return &platforms[WRT600N]; + } - if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) { + if (startswith(getvar("pmon_ver"), "CFE")) { /* CFE based - newer hardware */ if (!strcmp(boardnum, "42")) { /* Linksys */ + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1")) + return &platforms[WRT300NV11]; + if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1")) return &platforms[WRT350N]; @@ -591,51 +972,64 @@ static struct platform_t __init *platform_detect(void) if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1")) return &platforms[WRTSL54GS]; - + + if (!strcmp(boardtype, "0x0472")) + return &platforms[WRT160N]; + /* default to WRT54G */ return &platforms[WRT54G]; } - + if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446")) + return &platforms[WAP54GV2]; + + if (!strcmp(boardnum, "8") && !strcmp(boardtype, "0x048e")) + return &platforms[WL1600GL]; + + + if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) { + if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r")) + return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */ + } + if (!strcmp(boardnum, "45")) { /* ASUS */ if (!strcmp(boardtype,"0x042f")) return &platforms[WL500GP]; else if (!strcmp(boardtype,"0x0472")) return &platforms[WL500W]; + else if (!strcmp(boardtype,"0x467")) + return &platforms[WL320GE]; else return &platforms[WL500GD]; } - + if (!strcmp(boardnum, "10496")) return &platforms[USR5461]; - /* D-Link */ - if (!strcmp(getvar("model_name"), "DIR-130")) - return &platforms[DIR130]; - if (!strcmp(getvar("model_name"), "DIR-330")) - return &platforms[DIR330]; + if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */ + return &platforms[SE505V2]; - } else { /* PMON based - old stuff */ + if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") && + !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */ + return &platforms[DIR320]; + + if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) { + return &platforms[WDNetCenter]; + } - /* Dell TrueMobile 2300 */ - if (!strcmp(getvar("ModelId"),"WX-5565")) - return &platforms[TM2300]; - + } else { /* PMON based - old stuff */ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) && (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) { - if (!strncmp(getvar("ModelId"),"WE800G", 6)) - return &platforms[WE800G]; - else - return &platforms[WR850GV1]; + return &platforms[WR850GV1]; } - if (!strncmp(boardtype, "bcm94710dev", 11)) { + if (startswith(boardtype, "bcm94710dev")) { if (!strcmp(boardnum, "42")) return &platforms[WRT54GV1]; if (simple_strtoul(boardnum, NULL, 0) == 2) return &platforms[WAP54GV1]; } - if (!strncmp(getvar("hardware_version"), "WL500-", 6)) + if (startswith(getvar("hardware_version"), "WL500-")) return &platforms[WL500G]; - if (!strncmp(getvar("hardware_version"), "WL300-", 6)) { + if (startswith(getvar("hardware_version"), "WL300-")) { /* Either WL-300g or WL-HDD, do more extensive checks */ if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) && (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1)) @@ -644,52 +1038,51 @@ static struct platform_t __init *platform_detect(void) (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10)) return &platforms[WL300G]; } + /* Sitecom WL-105b */ + if (startswith(boardnum, "2") && simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 1) + return &platforms[WL105B]; /* unknown asus stuff, probably bcm4702 */ - if (!strncmp(boardnum, "asusX", 5)) + if (startswith(boardnum, "asusX")) return &platforms[ASUS_4702]; - } - if ((buf = (nvram_get("melco_id") ?: nvram_get("buffalo_id")))) { - /* Buffalo hardware, check id for specific hardware matches */ - if (!strcmp(buf, "29bb0332")) - return &platforms[WBR2_G54]; - if (!strcmp(buf, "29129")) - return &platforms[WLA2_G54L]; - if (!strcmp(buf, "30189")) - return &platforms[WHR_HP_G54]; - if (!strcmp(buf, "30182")) - return &platforms[WHR_G54S]; - if (!strcmp(buf, "290441dd")) - return &platforms[WHR2_A54G54]; - if (!strcmp(buf, "31120")) - return &platforms[WZR_G300N]; - if (!strcmp(buf, "30083")) - return &platforms[WZR_RS_G54]; - if (!strcmp(buf, "30103")) - return &platforms[WZR_RS_G54HP]; + /* bcm4702 based Askey RT210W clones, Including: + * Askey RT210W (duh?) + * Siemens SE505v1 + * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated) + */ + if (!strcmp(boardtype,"bcm94710r4") + && !strcmp(boardnum ,"100") + && !strcmp(getvar("pmon_ver"),"v1.03.12.bk") + ){ + return &platforms[RT210W]; + } } if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */ - if (!strncmp(boardtype, "bcm94710ap", 10)) + if (startswith(boardtype, "bcm94710ap")) return &platforms[BUFFALO_UNKNOWN_4710]; else return &platforms[BUFFALO_UNKNOWN]; } - if (!strcmp(getvar("CFEver"), "MotoWRv203") || + if (startswith(getvar("CFEver"), "MotoWRv2") || + startswith(getvar("CFEver"), "MotoWRv3") || !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) { return &platforms[WR850GV2V3]; } - if (!strcmp(boardnum, "44")) { /* Trendware TEW-411BRP+ */ + if (!strcmp(boardnum, "44") && !strcmp(getvar("boardflags"),"0x0388")) { /* Trendware TEW-411BRP+ */ return &platforms[TEW411BRPP]; } - if (!strncmp(boardnum, "04FN52", 6)) /* SimpleTech SimpleShare */ + if (startswith(boardnum, "04FN52")) /* SimpleTech SimpleShare */ return &platforms[STI_NAS]; + if (!strcmp(getvar("boardnum"), "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */ + return &platforms[DWL3150]; + /* not found */ return NULL; } @@ -705,14 +1098,14 @@ static void register_buttons(struct button_t *b) gpio_control(platform.button_mask, 0); platform.button_polarity = gpio_in() & platform.button_mask; gpio_intpolarity(platform.button_mask, platform.button_polarity); - gpio_intmask(platform.button_mask, platform.button_mask); + gpio_setintmask(platform.button_mask, platform.button_mask); gpio_set_irqenable(1, button_handler); } static void unregister_buttons(struct button_t *b) { - gpio_intmask(platform.button_mask, 0); + gpio_setintmask(platform.button_mask, 0); gpio_set_irqenable(0, button_handler); } @@ -826,7 +1219,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) changed &= ~gpio_outen(0, 0); - for (b = platform.buttons; b->name; b++) { + for (b = platform.buttons; b->name; b++) { struct event_t *event; if (!(b->gpio & changed)) continue; @@ -854,24 +1247,28 @@ static void register_leds(struct led_t *l) { struct proc_dir_entry *p; u32 mask = 0; + u32 oe_mask = 0; u32 val = 0; leds = proc_mkdir("led", diag); - if (!leds) + if (!leds) return; for(; l->name; l++) { if (l->gpio & gpiomask) continue; - + if (l->gpio & GPIO_TYPE_EXTIF) { l->state = 0; set_led_extif(l); } else { + if (l->polarity != INPUT) oe_mask |= l->gpio; mask |= l->gpio; val |= (l->polarity == NORMAL)?0:l->gpio; } + if (l->polarity == INPUT) continue; + if ((p = create_proc_entry(l->name, S_IRUSR, leds))) { l->proc.type = PROC_LED; l->proc.ptr = l; @@ -880,9 +1277,10 @@ static void register_leds(struct led_t *l) } } - gpio_outen(mask, mask); + gpio_outen(mask, oe_mask); gpio_control(mask, 0); gpio_out(mask, val); + gpio_setintmask(mask, 0); } static void unregister_leds(struct led_t *l) @@ -938,10 +1336,10 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t #endif char *page; int len = 0; - + if ((page = kmalloc(1024, GFP_KERNEL)) == NULL) return -ENOBUFS; - + if (dent->data != NULL) { struct prochandler_t *handler = (struct prochandler_t *) dent->data; switch (handler->type) { @@ -1005,14 +1403,14 @@ static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, return -EINVAL; } page[count] = 0; - + if (dent->data != NULL) { struct prochandler_t *handler = (struct prochandler_t *) dent->data; switch (handler->type) { case PROC_LED: { struct led_t *led = (struct led_t *) handler->ptr; int p = (led->polarity == NORMAL ? 0 : 1); - + if (page[0] == 'f') { led->flash = 1; led_flash(0);