X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/274d69a92270bf677a9f12b14e372152aa00e126..c0241ce8caf879dd9a61e6839a9dbf8a8e1c6c6b:/package/switch/src/switch-adm.c diff --git a/package/switch/src/switch-adm.c b/package/switch/src/switch-adm.c index 083b6ebc4..fa59c3fb8 100644 --- a/package/switch/src/switch-adm.c +++ b/package/switch/src/switch-adm.c @@ -2,7 +2,7 @@ * ADMTEK Adm6996 switch configuration module * * Copyright (C) 2005 Felix Fietkau - * + * * Partially based on Broadcom Home Networking Division 10/100 Mbit/s * Ethernet Device Driver (from Montavista 2.4.20_mvl31 Kernel). * Copyright (C) 2004 Broadcom Corporation @@ -22,11 +22,10 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ -#include #include #include #include @@ -75,7 +74,7 @@ MODULE_PARM(force, "i"); #define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) -#if defined(BCMGPIO2) || defined(BCMGPIO) +#ifdef BROADCOM extern char *nvram_get(char *name); /* Return gpio pin number assigned to the named pin */ @@ -86,7 +85,7 @@ extern char *nvram_get(char *name); * * 'def_pin' is returned if there is no such variable found. */ -static unsigned int getgpiopin(char *pin_name, unsigned int def_pin) +static unsigned int get_gpiopin(char *pin_name, unsigned int def_pin) { char name[] = "gpioXXXX"; char *val; @@ -109,7 +108,7 @@ static void adm_write(int cs, char *buf, unsigned int bits) int i, len = (bits + 7) / 8; __u8 mask; - gpioout(eecs, (cs ? eecs : 0)); + gpio_out(eecs, (cs ? eecs : 0)); udelay(EECK_EDGE_TIME); /* Byte assemble from MSB to LSB */ @@ -117,25 +116,25 @@ static void adm_write(int cs, char *buf, unsigned int bits) /* Bit bang from MSB to LSB */ for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) { /* Clock low */ - gpioout(eesk, 0); + gpio_out(eesk, 0); udelay(EECK_EDGE_TIME); /* Output on rising edge */ - gpioout(eedi, ((mask & buf[i]) ? eedi : 0)); + gpio_out(eedi, ((mask & buf[i]) ? eedi : 0)); udelay(EEDI_SETUP_TIME); /* Clock high */ - gpioout(eesk, eesk); + gpio_out(eesk, eesk); udelay(EECK_EDGE_TIME); } } /* Clock low */ - gpioout(eesk, 0); + gpio_out(eesk, 0); udelay(EECK_EDGE_TIME); if (cs) - gpioout(eecs, 0); + gpio_out(eecs, 0); } @@ -144,7 +143,7 @@ static void adm_read(int cs, char *buf, unsigned int bits) int i, len = (bits + 7) / 8; __u8 mask; - gpioout(eecs, (cs ? eecs : 0)); + gpio_out(eecs, (cs ? eecs : 0)); udelay(EECK_EDGE_TIME); /* Byte assemble from MSB to LSB */ @@ -156,16 +155,16 @@ static void adm_read(int cs, char *buf, unsigned int bits) __u8 gp; /* Clock low */ - gpioout(eesk, 0); + gpio_out(eesk, 0); udelay(EECK_EDGE_TIME); /* Input on rising edge */ - gp = gpioin(); + gp = gpio_in(); if (gp & eedi) byte |= mask; /* Clock high */ - gpioout(eesk, eesk); + gpio_out(eesk, eesk); udelay(EECK_EDGE_TIME); } @@ -173,31 +172,31 @@ static void adm_read(int cs, char *buf, unsigned int bits) } /* Clock low */ - gpioout(eesk, 0); + gpio_out(eesk, 0); udelay(EECK_EDGE_TIME); if (cs) - gpioout(eecs, 0); + gpio_out(eecs, 0); } /* Enable outputs with specified value to the chip */ static void adm_enout(__u8 pins, __u8 val) -{ +{ /* Prepare GPIO output value */ - gpioout(pins, val); - + gpio_out(pins, val); + /* Enable GPIO outputs */ - gpioouten(pins, pins); + gpio_outen(pins, pins); udelay(EECK_EDGE_TIME); } /* Disable outputs to the chip */ static void adm_disout(__u8 pins) -{ +{ /* Disable GPIO outputs */ - gpioouten(pins, 0); + gpio_outen(pins, 0); udelay(EECK_EDGE_TIME); } @@ -208,11 +207,11 @@ static void adm_adclk(int clocks) int i; for (i = 0; i < clocks; i++) { /* Clock high */ - gpioout(eesk, eesk); + gpio_out(eesk, eesk); udelay(EECK_EDGE_TIME); /* Clock low */ - gpioout(eesk, 0); + gpio_out(eesk, 0); udelay(EECK_EDGE_TIME); } } @@ -223,7 +222,7 @@ static __u32 adm_rreg(__u8 table, __u8 addr) __u8 bits[6] = { 0xFF, 0xFF, 0xFF, 0xFF, (0x06 << 4) | ((table & 0x01) << 3 | (addr&64)>>6), - ((addr&62)<<2) + ((addr&63)<<2) }; __u8 rbits[4]; @@ -286,17 +285,17 @@ static int vlan_ports[] = { 1 << 0, 1 << 2, 1 << 4, 1 << 6, 1 << 7, 1 << 8 }; static int handle_vlan_port_read(void *driver, char *buf, int nr) { int ports, i, c, len = 0; - + if ((nr < 0) || (nr > 15)) return 0; /* Get VLAN port map */ ports = adm_rreg(0, 0x13 + nr); - + for (i = 0; i <= 5; i++) { if (ports & vlan_ports[i]) { c = adm_rreg(0, port_conf[i]); - + len += sprintf(buf + len, "%d", i); if (c & (1 << 4)) { buf[len++] = 't'; @@ -328,17 +327,17 @@ static int handle_vlan_port_write(void *driver, char *buf, int nr) ports |= vlan_ports[i]; cfg = adm_rreg(0, port_conf[i]); - + /* Tagging */ if (c->untag & (1 << i)) cfg &= ~(1 << 4); else cfg |= (1 << 4); - + if ((c->untag | c->pvid) & (1 << i)) { cfg = (cfg & ~(0xf << 10)) | (nr << 10); } - + adm_wreg(port_conf[i], (__u16) cfg); } else { ports &= ~(vlan_ports[i]); @@ -357,7 +356,7 @@ static int handle_port_enable_read(void *driver, char *buf, int nr) static int handle_port_enable_write(void *driver, char *buf, int nr) { int reg = adm_rreg(0, port_conf[nr]); - + if (buf[0] == '0') reg |= (1 << 5); else if (buf[0] == '1') @@ -392,7 +391,7 @@ static int handle_port_media_write(void *driver, char *buf, int nr) if (media < 0) return -1; - + reg &= ~((1 << 1) | (1 << 2) | (1 << 3)); if (media & SWITCH_MEDIA_AUTO) reg |= 1 << 1; @@ -402,7 +401,7 @@ static int handle_port_media_write(void *driver, char *buf, int nr) reg |= 1 << 3; adm_wreg(port_conf[nr], reg); - + return 0; } @@ -414,7 +413,7 @@ static int handle_vlan_enable_read(void *driver, char *buf, int nr) static int handle_vlan_enable_write(void *driver, char *buf, int nr) { int reg = adm_rreg(0, 0x11); - + if (buf[0] == '1') reg |= (1 << 5); else if (buf[0] == '0') @@ -454,7 +453,7 @@ static int handle_reset(void *driver, char *buf, int nr) udelay(1000); /* Leave RC high and disable GPIO outputs */ adm_disout((__u8)(eecs | eesk | eedi)); - + } /* set up initial configuration for cpu port */ @@ -463,7 +462,7 @@ static int handle_reset(void *driver, char *buf, int nr) (1 << 4) | /* Tagging */ 0xf); /* full duplex, 100Mbps, auto neg, flow ctrl */ adm_wreg(port_conf[5], cfg); - + /* vlan mode select register (0x11): vlan on, mac clone */ adm_wreg(0x11, 0xff30); @@ -473,7 +472,7 @@ static int handle_reset(void *driver, char *buf, int nr) static int handle_registers(void *driver, char *buf, int nr) { int i, len = 0; - + for (i = 0; i <= 0x33; i++) { len += sprintf(buf + len, "0x%02x: 0x%04x\n", i, adm_rreg(0, i)); } @@ -496,16 +495,25 @@ static int detect_adm(void) { int ret = 0; -#if defined(BCMGPIO2) || defined(BCMGPIO) +#ifdef BROADCOM int boardflags = atoi(nvram_get("boardflags")); + int boardnum = atoi(nvram_get("boardnum")); - if ((boardflags & 0x80) || force) { + if ((boardnum == 44) && (boardflags == 0x0388)) { /* Trendware TEW-411BRP+ */ ret = 1; - eecs = getgpiopin("adm_eecs", 2); - eesk = getgpiopin("adm_eesk", 3); - eedi = getgpiopin("adm_eedi", 4); - eerc = getgpiopin("adm_rc", 0); + eecs = get_gpiopin("adm_eecs", 2); + eesk = get_gpiopin("adm_eesk", 3); + eedi = get_gpiopin("adm_eedi", 4); + eerc = get_gpiopin("adm_rc", 5); + + } else if ((boardflags & 0x80) || force) { + ret = 1; + + eecs = get_gpiopin("adm_eecs", 2); + eesk = get_gpiopin("adm_eesk", 3); + eedi = get_gpiopin("adm_eedi", 4); + eerc = get_gpiopin("adm_rc", 0); } else if ((strcmp(nvram_get("boardtype") ?: "", "bcm94710dev") == 0) && (strncmp(nvram_get("boardnum") ?: "", "42", 2) == 0)) { @@ -515,9 +523,8 @@ static int detect_adm(void) eedi = 5; ret = 1; - } else - printk("BFL_ENETADM not set in boardflags. Use force=1 to ignore.\n"); - + } + if (eecs) eecs = (1 << eecs); if (eesk)