X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/2f006aa5e8a74e2dd224f5e9b90d36c79651fd66..e5365b0ddc1bab0adb1e89fbe53951047c5a1d6d:/package/linux/linux.mk

diff --git a/package/linux/linux.mk b/package/linux/linux.mk
index 69245b083..8610bb2c1 100644
--- a/package/linux/linux.mk
+++ b/package/linux/linux.mk
@@ -1,77 +1,74 @@
 #############################################################
+# $Id$
 #
-# Linux kernel targets
+# Linux kernel target for the OpenWRT project
 #
-# Note:  If you have any patches to apply, create the directory
-# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them...  i.e.
-#
-#   sources/kernel-patches/001-my-special-stuff.bz2
-#   sources/kernel-patches/003-gcc-Os.bz2
-#   sources/kernel-patches/004_no-warnings.bz2
-#   sources/kernel-patches/030-lowlatency-mini.bz2
-#   sources/kernel-patches/031-lowlatency-fixes-5.bz2
-#   sources/kernel-patches/099-shutup.bz2
-#   etc...
-#
-# these patches will all be applied by the patch-kernel.sh
-# script (which will also abort the build if it finds rejects)
-#  -Erik
+# patches are sorted by numbers
+# 000	patch between linux-2.4.xx and linux-mips-cvs
+# 0xx	linksys patches
+# 1xx	OpenWRT patches (diag,compressed,..)
+# 2xx	fixes for wl driver integration
+# 3xx	kernel feature patches (squashfs,jffs2 compression,..)
+# 4xx	patches needed to integrate feature patches
 #
 #############################################################
-ifneq ($(filter $(TARGETS),linux),)
-
-# Version of Linux to download and then apply patches to
-DOWNLOAD_LINUX_VERSION=2.4.27
-# Version of Linux AFTER patches
-LINUX_VERSION=2.4.28-pre4-erik
 
-LINUX_FORMAT=vmlinux
-#LINUX_FORMAT=images/zImage.prep
+LINUX_FORMAT=zImage
 LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
 	-e 's/mipsel/mips/' \
 	-e 's/powerpc/ppc/' \
 	-e 's/sh[234]/sh/' \
 	)
-LINUX_BINLOC=arch/$(LINUX_KARCH)/boot/$(LINUX_FORMAT)
 
-LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_SOURCE=linux-$(DOWNLOAD_LINUX_VERSION).tar.bz2
-LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4
-LINUX_KCONFIG=package/linux/linux.config
-LINUX_KERNEL=$(BUILD_DIR)/buildroot-kernel
+LINUX_BINARY_DRIVER_SITE=http://openwrt.openbsd-geek.de
+LINUX_SOURCE=linux-$(LINUX_VERSION).tar.bz2
+LINUX_KCONFIG=./linux.config
+LINUX_PATCHES=./kernel-patches
+LINUX_KERNEL_SOURCE=./kernel-source
+LINUX_BINLOC=arch/$(LINUX_KARCH)/brcm-boards/bcm947xx/compressed/piggy
 # Used by pcmcia-cs and others
-LINUX_SOURCE_DIR=$(LINUX_DIR)
+LINUX_SOURCE_DIR=$(LINUX_DIR)-$(LINUX_VERSION)
+
+# proprietary driver extracted from linksys firmware GPL sourcetree WRT54GS_3_37_2_1109_US 
+LINUX_BINARY_WL_DRIVER=kernel-binary-wl-0.2.tar.gz
+LINUX_BINARY_WL_MD5SUM=ab2a6d39ccb550e494bbeccf1b0e228f
+LINUX_ET_DRIVER=kernel-source-et-0.5.tar.gz
+LINUX_ET_MD5SUM=93402cd0cbb1cf81d6df204bb7de343d
+
+TARGET_MODULES_DIR=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
 
+$(DL_DIR)/$(LINUX_BINARY_WL_DRIVER):
+	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_BINARY_WL_DRIVER) $(LINUX_BINARY_WL_MD5SUM) $(LINUX_BINARY_DRIVER_SITE)
 
-$(DL_DIR)/$(LINUX_SOURCE):
-	-mkdir -p $(DL_DIR)
-	$(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
+$(DL_DIR)/$(LINUX_ET_DRIVER):
+	$(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_ET_DRIVER) $(LINUX_ET_MD5SUM) $(LINUX_BINARY_DRIVER_SITE)
 
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
-	-mkdir -p $(TOOL_BUILD_DIR)
-	-(cd $(TOOL_BUILD_DIR); ln -sf $(LINUX_DIR) linux)
+$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) $(DL_DIR)/$(LINUX_ET_DRIVER)
+	-mkdir -p $(BUILD_DIR)
 	bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION))
-	# Rename the dir from the downloaded version to the AFTER patch version	
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION)
-endif
-	mkdir -p package/linux/kernel-patches
-	toolchain/patch-kernel.sh $(LINUX_DIR) package/linux/kernel-patches
+	ln -sf $(LINUX_DIR)-$(LINUX_VERSION) $(LINUX_DIR)
+	zcat $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+	zcat $(DL_DIR)/$(LINUX_ET_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
 	touch $(LINUX_DIR)/.unpacked
 
-$(LINUX_KCONFIG):
-	@if [ ! -f "$(LINUX_KCONFIG)" ] ; then \
-		echo ""; \
-		echo "You should create a .config for your kernel"; \
-		echo "and install it as $(LINUX_KCONFIG)"; \
-		echo ""; \
-		sleep 5; \
-	fi;
-
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured:  $(LINUX_DIR)/.unpacked  $(LINUX_KCONFIG)
-	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
+$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
+	$(PATCH) $(LINUX_DIR) $(LINUX_PATCHES)
+	# copy kernel source which is maintained in openwrt via cvs
+	cp -a $(LINUX_KERNEL_SOURCE)/* $(LINUX_DIR)
+	# copy binary wlan driver
+	cp -a $(BUILD_DIR)/wl/*.o $(LINUX_DIR)/drivers/net/wl
+	# copy proprietary et source
+	cp -a $(BUILD_DIR)/et/* $(LINUX_DIR)/drivers/net/et
+	cp -a $(BUILD_DIR)/et/*.h $(LINUX_DIR)/include/
+	$(SED) 's/@expr length/@-expr length/' $(LINUX_DIR)/Makefile 
+	touch $(LINUX_DIR)/.patched
+
+$(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched
 	-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
+	$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" \
+	  $(LINUX_DIR)/Makefile  \
+	  $(LINUX_DIR)/arch/mips/Makefile
+	$(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile
 	$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) oldconfig include/linux/version.h
 	touch $(LINUX_DIR)/.configured
 
@@ -81,35 +78,42 @@ $(LINUX_DIR)/.depend_done:  $(LINUX_DIR)/.configured
 
 $(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
 	$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) $(LINUX_FORMAT)
-	$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) modules
 
 $(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC)
-	cp -fa $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL)
+	cp -fa $< $@ 
 	touch -c $(LINUX_KERNEL)
+	
+$(LINUX_IMAGE): $(LINUX_KERNEL)
+	cat $^ | $(BUILD_DIR)/lzma/lzma e -si -so -eos > $@ || (rm -f $@ && false)
 
-$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep: $(LINUX_KERNEL)
-	rm -rf $(TARGET_DIR)/lib/modules
-	rm -f $(TARGET_DIR)/sbin/cardmgr
-	$(MAKE) -C $(LINUX_DIR) INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
-	(cd $(TARGET_DIR)/lib/modules; ln -s $(LINUX_VERSION)/kernel/drivers .)
+$(LINUX_DIR)/.modules_done: $(LINUX_KERNEL) $(LINUX_IMAGE)
+	rm -rf $(BUILD_DIR)/modules
+	$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) modules
+	$(MAKE) -C $(LINUX_DIR) DEPMOD=true INSTALL_MOD_PATH=$(BUILD_DIR)/modules modules_install
+	touch $(LINUX_DIR)/.modules_done
 
 $(STAGING_DIR)/include/linux/version.h: $(LINUX_DIR)/.configured
 	mkdir -p $(STAGING_DIR)/include
 	tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/
 	tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/
 
-linux: $(STAGING_DIR)/include/linux/version.h $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep
+$(TARGET_MODULES_DIR): 
+	-mkdir -p $(TARGET_MODULES_DIR)
+
+linux: $(LINUX_DIR)/.modules_done $(TARGET_MODULES_DIR)
 
 linux-source: $(DL_DIR)/$(LINUX_SOURCE)
 
 # This has been renamed so we do _NOT_ by default run this on 'make clean'
 linuxclean: clean
-	rm -f $(LINUX_KERNEL)
+	rm -f $(LINUX_KERNEL) $(LINUX_IMAGE)
 	-$(MAKE) -C $(LINUX_DIR) clean
 
 linux-dirclean:
+	rm -f $(BUILD_DIR)/openwrt-kmodules.tar.bz2
+	rm -rf $(LINUX_DIR)-$(LINUX_VERSION)
 	rm -rf $(LINUX_DIR)
+	rm -rf $(BUILD_DIR)/modules
+	rm -rf $(BUILD_DIR)/wl
+	rm -rf $(BUILD_DIR)/et
 
-linux-headers: $(LINUX_DIR)/.configured 
-
-endif